--- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/README.Debian +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/README.Debian @@ -0,0 +1,13 @@ +xserver-xorg-video-intel (2:2.13.0-2) unstable; urgency=low + + * Starting from 2.10, the Intel X driver depends on a kernel driver for + mode setting (that's called KMS). The corresponding kernel option is + CONFIG_DRM_I915, and is enabled in Debian kernels. + * To enable KMS, either of those should be sufficient: + + /etc/modprobe.d/i915-kms.conf should contain: + options i915 modeset=1 + + CONFIG_DRM_I915_KMS=y should be set in the kernel config. + * If you have issues with this driver, the "vesa" or "fbdev" drivers + may be useful fallbacks. + + -- Cyril Brulebois Sun, 07 Nov 2010 19:51:56 +0100 --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/README.source +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/README.source @@ -0,0 +1,55 @@ +------------------------------------------------------ +Quick Guide To Patching This Package For The Impatient +------------------------------------------------------ + +1. Make sure you have quilt installed +2. Unpack the package as usual with "dpkg-source -x" +3. Run the "patch" target in debian/rules +4. Create a new patch with "quilt new" (see quilt(1)) +5. Edit all the files you want to include in the patch with "quilt edit" + (see quilt(1)). +6. Write the patch with "quilt refresh" (see quilt(1)) +7. Run the "clean" target in debian/rules + +Alternatively, instead of using quilt directly, you can drop the patch in to +debian/patches and add the name of the patch to debian/patches/series. + +While building from git, dpkg-source can complain about symlinks vs. +normal files mismatches. To work around this issue, before uploading, +and without committing: + + find -type l | while read dest; do src=$(readlink -f $dest); rm $dest; cp $src $dest; done + +------------------------------------ +Guide To The X Strike Force Packages +------------------------------------ + +The X Strike Force team maintains X packages in git repositories on +git.debian.org in the pkg-xorg subdirectory. Most upstream packages +are actually maintained in git repositories as well, so they often +just need to be pulled into git.debian.org in a "upstream-*" branch. +Otherwise, the upstream sources are manually installed in the Debian +git repository. + +The .orig.tar.gz upstream source file could be generated using this +"upstream-*" branch in the Debian git repository but it is actually +copied from upstream tarballs directly. + +Due to X.org being highly modular, packaging all X.org applications +as their own independent packages would have created too many Debian +packages. For this reason, some X.org applications have been grouped +into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils, +x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils. +Most packages, including the X.org server itself and all libraries +and drivers are, however maintained independently. + +The Debian packaging is added by creating the "debian-*" git branch +which contains the aforementioned "upstream-*" branch plus the debian/ +repository files. +When a patch has to be applied to the Debian package, two solutions +are involved: +* If the patch is available in one of the upstream branches, it + may be git'cherry-picked into the Debian repository. In this + case, it appears directly in the .diff.gz. +* Otherwise, the patch is added to debian/patches/ which is managed + with quilt as documented in /usr/share/doc/quilt/README.source. --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/changelog +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/changelog @@ -0,0 +1,1539 @@ +xserver-xorg-video-intel (2:2.99.917+git20200714-1+deb11u1) bullseye; urgency=medium + + [ Julien Cristau ] + * Fix SIGILL crash on non-SSE2 CPUs (closes: #979276) + + -- Julien Cristau Wed, 26 Jan 2022 17:56:02 +0100 + +xserver-xorg-video-intel (2:2.99.917+git20200714-1) unstable; urgency=medium + + * New upstream snapshot. (Closes: #959400) + + -- Timo Aaltonen Tue, 14 Jul 2020 21:38:13 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20200226-1) unstable; urgency=medium + + * New upstream snapshot. + * control: Use debhelper-compat, bump to 12. + * control: Migrate to x11proto-dev. + * control: Bump build-dep on libxvmc-dev. + * control: Bump policy to 4.5.0. + + -- Timo Aaltonen Tue, 14 Apr 2020 19:29:19 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20190815-1) unstable; urgency=medium + + * New upstream snapshot. + * control: Fix a typo in the description. (Closes: #934776) + * 01_Fix-build-on-i686.diff: Dropped, upstream. + + -- Timo Aaltonen Thu, 15 Aug 2019 13:32:33 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20180925-2) unstable; urgency=medium + + * Add 01_Fix-build-on-i686.diff, fixes FTBFS on i386 with gcc-8 + (Closes: #909860). + + -- Andreas Boll Tue, 09 Oct 2018 17:42:33 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20180925-1) unstable; urgency=medium + + * New upstream snapshot + * Switch to dbgsym package. + * control: Update VCS urls. + * rules: Fix destdir, use dh_missing. + + -- Timo Aaltonen Tue, 25 Sep 2018 15:28:52 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20171229-1) unstable; urgency=medium + + * New upstream snapshot. + + -- Timo Aaltonen Wed, 17 Jan 2018 10:13:50 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20161206-1) unstable; urgency=medium + + [ Andreas Boll ] + * New upstream snapshot. + - sna: Add missing NULL check for readdir result in + has_connector_backlight (Closes: #847073). Thanks to James Clarke for + tracking this down. + * Bump debhelper compat to 10. + * Stop passing --disable-silent-rules to configure, debhelper does + that for a while. + * debhelper installs to debian/tmp by default, no need to specify it. + * Update a bunch of URLs in packaging to https. + + -- Timo Aaltonen Wed, 14 Dec 2016 11:33:01 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20161105-1) unstable; urgency=medium + + * New upstream snapshot. + * control: Bump policy to 3.9.8, no changes. + + -- Timo Aaltonen Thu, 17 Nov 2016 12:44:07 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20160706-1) unstable; urgency=medium + + * New upstream snapshot. + * fix-fd-leak-when-intel-scrn-create-fails.diff, sna-let-modesetting- + handle-gen9+.diff: Dropped as the fallback to modesetting will be + fully handled in the xserver. + * .docs: Include a minimal xorg.conf. + + -- Timo Aaltonen Wed, 06 Jul 2016 22:34:40 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20160522-1) unstable; urgency=medium + + * New upstream snapshot. (Closes: #823116) + * fix-fd-leak-when-intel-scrn-create-fails.diff: Fix a failure falling back + on another driver when scrn create fails. + + -- Timo Aaltonen Tue, 24 May 2016 11:40:02 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20160325-1) unstable; urgency=medium + + * New upstream snapshot. + + -- Timo Aaltonen Tue, 29 Mar 2016 10:29:35 +0300 + +xserver-xorg-video-intel (2:2.99.917+git20160307-2) unstable; urgency=medium + + * Disable the patch to use modesetting on skylake for now, since it reveals + modeset/server bugs. (Closes: #817784) + + -- Timo Aaltonen Thu, 10 Mar 2016 22:16:19 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20160307-1) unstable; urgency=medium + + [ Timo Aaltonen ] + * New upstream snapshot. + * control: Update the description, older hw likely still wants this + driver. + * sna-let-modesetting-handle-gen9+.diff: Use modesetting+glamor on + Skylake and up. + + [ Matthias Klose ] + * Move the shared libraries into multiarch libdir. + * rules: Enable parallel builds. + + -- Timo Aaltonen Wed, 09 Mar 2016 21:26:17 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20160218-1) unstable; urgency=medium + + * New upstream snapshot. + + -- Timo Aaltonen Fri, 19 Feb 2016 00:06:43 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20160127-1) unstable; urgency=medium + + * New upstream snapshot. + * control: Document build-depends for dri3info and tests, benchmarks. + * control: Update description to mention that this driver is + deprecated in favor of -modesetting. + * rules: Use upstream-unstable branch to build a snapshot tarball. + * control: Add libxss-dev to build-depends for intel-virtual-output. + + -- Timo Aaltonen Wed, 27 Jan 2016 14:56:38 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20151217-1~exp1) experimental; urgency=medium + + * New upstream snapshot. + + -- Timo Aaltonen Thu, 17 Dec 2015 15:10:01 +0200 + +xserver-xorg-video-intel (2:2.99.917+git20151019-1~exp1) experimental; urgency=medium + + * New upstream snapshot. + * rules: Fix valgrind-enabling check. + * README.source: Mention that dpkg-source complains about symlinks + which are real files on the tarball, and add a command to clean + those before source build (copied from libdrm). + * patches: Dropped, all upstream. + + -- Timo Aaltonen Tue, 27 Oct 2015 19:07:45 +0200 + +xserver-xorg-video-intel (2:2.99.917-2) unstable; urgency=medium + + [ Robert Ancell ] + * debian/patches/fix-sna-fstat-include.patch: + * debian/patches/fix-uxa-fstat-include.patch: + - Fix missing include for fstat (Closes: #790911) + + [ Alessio Treglia ] + * fix-yuv-to-rgb-shared-on-intel-gen8.patch: Fix faulty yuv2rgb translation + on Intel Generation 8 Graphics. (LP: #1449892, Closes: #787142) + + [ Timo Aaltonen ] + * rules: Fix valgrind-enabling check. + * source: Add extend-diff-ignore to not complain about symlinks. + * README.source: Mention that dpkg-source complains about symlinks + which are real files on the tarball, and add a command to clean + those before source build (copied from libdrm). + + [ Adam Borowski ] + * Add x32 to the list of architectures. (Closes: #775200) + + [ Vincent Cheng ] + * Explicitly declare source format 1.0. + * Update valgrind build-dependency architecture list. + + -- Vincent Cheng Thu, 16 Jul 2015 01:00:41 -0700 + +xserver-xorg-video-intel (2:2.99.917-1) unstable; urgency=medium + + * Upload to unstable. (Closes: #748753) + + -- Vincent Cheng Thu, 07 May 2015 00:46:06 -0700 + +xserver-xorg-video-intel (2:2.99.917-1~exp1) experimental; urgency=medium + + * New upstream prerelease 2.99.917. + * Update upstream changelog. + * Update to Standards version 3.9.6. + + -- Vincent Cheng Sun, 21 Dec 2014 21:37:27 -0800 + +xserver-xorg-video-intel (2:2.99.916+git20141119-1~exp1) experimental; urgency=medium + + * New upstream snapshot. + + -- maximilian attems Sun, 23 Nov 2014 00:04:02 +0100 + +xserver-xorg-video-intel (2:2.99.916-1~exp1) experimental; urgency=medium + + [ Vincent Cheng ] + * New upstream prerelease 2.99.916. + - sna: Add the current CRTC mode last (Closes: #750605) + * Update debian/copyright. (Closes: #730643) + * Revert to source format 1.0. + + [ Laurent Bigonville ] + * debian/xserver-xorg-video-intel.maintscript: Explicitly remove + i915-kms.conf on upgrade. (Closes: #713340) + + -- Vincent Cheng Sun, 14 Sep 2014 01:29:56 -0700 + +xserver-xorg-video-intel (2:2.99.914-1~exp1) experimental; urgency=medium + + * New upstream prerelease 2.99.914. + * Update upstream changelog. + * Fix FTBFS on kfreebsd by not installing non-existent files. + + -- Vincent Cheng Wed, 23 Jul 2014 22:49:08 -0700 + +xserver-xorg-video-intel (2:2.99.912+git20140719-1~exp1) experimental; urgency=medium + + * New upstream snapshot. + + -- maximilian attems Sat, 19 Jul 2014 14:18:15 +0200 + +xserver-xorg-video-intel (2:2.99.912+git20140705-1~exp1) experimental; urgency=medium + + * New upstream snapshot. + + [ Julien Cristau ] + * Remove Cyril from Uploaders. + + -- maximilian attems Sat, 05 Jul 2014 20:47:01 +0200 + +xserver-xorg-video-intel (2:2.99.912-1~exp1) experimental; urgency=medium + + * New upstream prerelease 2.99.912. + * Update upstream changelog. + + -- maximilian attems Tue, 10 Jun 2014 21:59:57 +0200 + +xserver-xorg-video-intel (2:2.99.911+git20140607-1~exp1) experimental; urgency=medium + + * New upstream prerelease. + + -- maximilian attems Sat, 07 Jun 2014 10:33:52 +0200 + +xserver-xorg-video-intel (2:2.99.911+git20140529-1~exp2) experimental; urgency=medium + + * Add myself to Uploaders. + * Install intel-virtual-output. (Closes: #749925) + - New build-deps added: libxinerama-dev, libxrandr-dev, libxdamage-dev, + libxcursor-dev, libxtst-dev, libxrender-dev, libpixman-1-dev + * Stop overriding default upstream acceleration method (i.e. default to SNA + instead of UXA). + + -- Vincent Cheng Mon, 02 Jun 2014 23:47:23 -0700 + +xserver-xorg-video-intel (2:2.99.911+git20140529-1~exp1) experimental; urgency=low + + * New upstream prerelease. (closes: #748753) + * Install new backlight helper. + * Add myself to Uploaders. + * Bump Standards-Version to 3.9.5 (no changes necessary) + + -- maximilian attems Fri, 30 May 2014 11:15:58 +0200 + +xserver-xorg-video-intel (2:2.21.15-1) unstable; urgency=low + + * New upstream release. + * Drop patches Check-for-struct-sysinfo-as-well-as-sys-sysinfo.h.patch and + Link-the-driver-against-pixman.patch, they were applied upstream. + * Add myself to Uploaders to prevent lintian NMU warnings + * Bump Standards-Version to 3.9.4 (no changes necessary) + * Canonicalize Vcs-* fields + * Explicitly set source format to '3.0 (quilt)' + * Move homepage from description to homepage: field + + -- Michael Stapelberg Wed, 28 Aug 2013 19:39:47 +0200 + +xserver-xorg-video-intel (2:2.21.14-4) unstable; urgency=low + + * Link the driver against pixman to get correct dependency (closes: #719518). + Thanks to Martin Perazzo for the report! + + -- Julien Cristau Mon, 12 Aug 2013 19:48:43 +0200 + +xserver-xorg-video-intel (2:2.21.14-3) unstable; urgency=low + + * Add patch to deal with missing 'struct sysinfo' in kfreebsd's + . + + -- Julien Cristau Mon, 12 Aug 2013 15:31:14 +0200 + +xserver-xorg-video-intel (2:2.21.14-2) unstable; urgency=low + + * Don't enable valgrind on kfreebsd. + + -- Julien Cristau Mon, 12 Aug 2013 10:09:25 +0200 + +xserver-xorg-video-intel (2:2.21.14-1) unstable; urgency=low + + * New upstream release (closes: #697336). + + [ Maarten Lankhorst ] + * Add valgrind to build-depends. + * Enable valgrind by default. + + [ Sven Joachim ] + * Drop patch 0002-Update-manpage-for-new-accelmethod-option.patch, + superseded by upstream changes. + * Use dpkg-buildflags. + * Disable silent build rules. + + [ Julien Cristau ] + * Add kfreebsd to the package's architecture list (closes: #671870). + + -- Julien Cristau Mon, 12 Aug 2013 08:12:23 +0200 + +xserver-xorg-video-intel (2:2.20.14-1) experimental; urgency=low + + [ Timo Aaltonen ] + * New upstream bugfix release. + - Fixes a long-standing bug in UXA pageflip code that was the + source of many GPU hangs. + + -- Julien Cristau Sun, 02 Dec 2012 19:18:05 +0100 + +xserver-xorg-video-intel (2:2.20.5-1) experimental; urgency=low + + * New upstream release. + - Remove patch to support passing a builder string, merged upstream + 0001-Fix-build-failure-when-passing-with-builderstring.patch + + -- Julien Danjou Sun, 26 Aug 2012 14:25:55 +0200 + +xserver-xorg-video-intel (2:2.20.2-1) experimental; urgency=low + + [ Maarten Lankhorst ] + * New upstream release: + - First official release with sna + * Update to 2.20.1 point release: + - A bug affecting gen4 handling of trapezoids was fixed, and CPU + overhead reduced. + https://bugs.freedesktop.org/show_bug.cgi?id=52158 + - A fix for a bug causing corruption of a DRI2 unredirected client + window that was resized whilst under a compositor. + - Support for snoopable buffers on non-LLC architectures, coming to + a future kernel. The aim to accelerate transfers between the CPU + and the GPU, in particular to dramatically improve readback + performance, and to further minimise clflushes. + - Improvement to the composite performance on GT2 SandyBridge and + IvyBridge devices, in particular the render copy is significantly + improved. + - Improved handling for when acceleration is disabled, including + permitting DRI2 to remain supported even if the X server believes + the GPU wedged. + - Shadow support was dropped from UXA as it was neither complete nor + correct, use SNA instead. + + [ Julien Danjou ] + * New upstream release (2.20.2) + + -- Julien Danjou Sun, 29 Jul 2012 00:06:11 +0200 + +xserver-xorg-video-intel (2:2.19.0-6) unstable; urgency=low + + * Stop installing i915-kms.conf. It's not necessary with the wheezy kernel. + Keep it around on upgrade, though, to allow booting on the squeeze kernel. + + -- Julien Cristau Sun, 16 Sep 2012 20:46:52 +0200 + +xserver-xorg-video-intel (2:2.19.0-5) unstable; urgency=high + + * Reduce maximum thread count for IVB GT1 to avoid spontaneous combustion + + -- Julien Cristau Fri, 27 Jul 2012 10:54:27 +0200 + +xserver-xorg-video-intel (2:2.19.0-4) unstable; urgency=medium + + [ Julien Cristau ] + * uxa: Check for DPMS off before scheduling a WAIT_ON_EVENT. Fixes + regression from a cherry-pick in 2:2.19.0-2 (Closes: #677466). + Thanks to Julian Andres Klode for tracking this down. + + -- Cyril Brulebois Sat, 23 Jun 2012 21:06:26 +0200 + +xserver-xorg-video-intel (2:2.19.0-3) unstable; urgency=low + + * Add patch to avoid X segfaults with Driver-less Device sections in + xorg.conf (Closes: #677206): + - 0003-Avoid-calling-xf86nameCompare-with-a-NULL-pointer.patch + + -- Cyril Brulebois Tue, 12 Jun 2012 20:30:51 +0200 + +xserver-xorg-video-intel (2:2.19.0-2) unstable; urgency=low + + * Cherry-pick the following commits to make it possible to build both + uxa (legacy acceleration method) and sna (experimental acceleration + method): + - 3f3bde4f0c uxa: Only consider an output valid if the kernel reports it attached + - df6ab02c36 Unify options handling between UXA and SNA + - e456291350 Allow runtime switching of AccelMethod between uxa/sna and even glamor + - 318982566b sna/dri: Disable experimental code by default + - 7614a54188 configure: Harden --with-default-accel against simple mistakes + - 4e984b79cc configure: Correct the help string for --with-default-accel + * rules: Enable sna and uxa accel methods, default to uxa. The switch + to sna can be achieved through a minimal xorg.conf (look for “AccelMethod” + in: man intel). + * Add patch to document the new AccelMethod option accordingly: + - 0002-Update-manpage-for-new-accelmethod-option.patch + + -- Cyril Brulebois Mon, 11 Jun 2012 22:22:00 +0000 + +xserver-xorg-video-intel (2:2.19.0-1) unstable; urgency=low + + * New upstream release. + + -- Julien Cristau Sat, 26 May 2012 12:38:07 +0200 + +xserver-xorg-video-intel (2:2.18.0-2) unstable; urgency=low + + * Cherry-pick a change from upstream to fix a bug triggered by cairo 1.12: + uxa: Remove broken render glyphs-to-dst + + -- Julien Cristau Thu, 05 Apr 2012 20:24:22 +0200 + +xserver-xorg-video-intel (2:2.18.0-1+exp1) experimental; urgency=low + + * Enable SNA again, in experimental. + + -- Cyril Brulebois Fri, 24 Feb 2012 14:19:00 +0100 + +xserver-xorg-video-intel (2:2.18.0-1) unstable; urgency=low + + * New upstream release. + * No SNA for unstable, it's too fast of a moving target for now. + * Since we're building for unstable, let's go back to the previous + xorg-server build-dep. + + -- Cyril Brulebois Fri, 24 Feb 2012 14:16:47 +0100 + +xserver-xorg-video-intel (2:2.17.0+git20120204-1) experimental; urgency=low + + * New upstream snapshot: + - Merge from upstream master up to 24ece4a87e. + + -- Cyril Brulebois Sat, 04 Feb 2012 09:20:13 +0100 + +xserver-xorg-video-intel (2:2.17.0+git20120115-1) experimental; urgency=low + + * New upstream snapshot: + - Merge from upstream master up to 5df7147b09. + + -- Cyril Brulebois Mon, 16 Jan 2012 00:52:23 +0100 + +xserver-xorg-video-intel (2:2.17.0+git20120104-1) experimental; urgency=low + + * New upstream snapshot: + - Merge from upstream master up to 4119e68fb1. + * Implement a generate-snapshot rule to ease packaging snapshots. + + -- Cyril Brulebois Wed, 04 Jan 2012 22:19:19 +0100 + +xserver-xorg-video-intel (2:2.17.0+git20120101-2) experimental; urgency=low + + * Build against Xserver 1.12 RC1 (Closes: #653914). + + -- Cyril Brulebois Sun, 01 Jan 2012 14:58:27 +0100 + +xserver-xorg-video-intel (2:2.17.0+git20120101-1) experimental; urgency=low + + * New upstream snapshot: + - Merge from upstream master up to 770a953ff0. + * Enable SNA support, as suggested by upstream. It should be usable now + and regression reports are welcome. + * Add patch to support passing a builder string: + - 0001-Fix-build-failure-when-passing-with-builderstring.patch + * Pass a builder string, as done in the server. + + -- Cyril Brulebois Sun, 01 Jan 2012 06:34:09 +0100 + +xserver-xorg-video-intel (2:2.17.0-1) unstable; urgency=low + + [ Timo Aaltonen ] + * New upstream release. (Closes: #635953) + + -- Cyril Brulebois Sat, 19 Nov 2011 12:46:57 +0100 + +xserver-xorg-video-intel (2:2.16.0-1) unstable; urgency=low + + * New upstream release. + + -- Cyril Brulebois Sun, 28 Aug 2011 13:15:24 +0200 + +xserver-xorg-video-intel (2:2.15.901-1) experimental; urgency=low + + * Re-enable XvMC. + * New upstream snapshot. + * Build against xserver 1.10.99.x. + + -- Julien Cristau Mon, 01 Aug 2011 01:37:49 +0200 + +xserver-xorg-video-intel (2:2.15.0-3) unstable; urgency=high + + * Temporarily disable xvmc to sidestep the xcb-util mess and move to + testing. + + -- Julien Cristau Sat, 14 May 2011 19:00:38 +0200 + +xserver-xorg-video-intel (2:2.15.0-2) unstable; urgency=low + + * xcb-util was split up in 0.3.8 and libxcb-aux has been merged + into libxcb-util, thus update Build-Depends accordingly. + * Add ${misc:Depends} to xserver-xorg-video-intel-dbg Depends. + + -- Arnaud Fontaine Fri, 06 May 2011 23:53:39 +0900 + +xserver-xorg-video-intel (2:2.15.0-1) unstable; urgency=low + + * New upstream release. + * Merge from upstream master up to c9fb69cb25 to fix crashes with i965 + and kwin in particular, thanks to Julian Andres Klode and Modestas + Vainius for their reports in Debian and upstream (Closes: #622653): + - NEWS: typo. + - intel: Beware the unsigned promotion when checking for batch overflows + - i965/video: We need 150 dwords of space for video state emission + + -- Cyril Brulebois Tue, 19 Apr 2011 03:37:23 +0200 + +xserver-xorg-video-intel (2:2.14.902-1) unstable; urgency=low + + * New upstream snapshot (2.15 rc2). + * Apparently, using libXvMC means adding the name of the library (like + libI810XvMC.so.1 or libIntelXvMC.so.1) to the libXvMC configuration + file (/etc/X11/XvMCConfig). Accordingly, remove extraneous symlinks: + - /usr/lib/libI810XvMC.so + - /usr/lib/libIntelXvMC.so + * Override lintian warning about the libXvMC shared objects. + + -- Cyril Brulebois Sun, 10 Apr 2011 23:30:19 +0200 + +xserver-xorg-video-intel (2:2.14.0-4) unstable; urgency=low + + * Cherry-pick from upstream: + - uxa: Fallback if the temporary is too large + * This fixes a null pointer dereference with some rendering operations + involving large pictures (Closes: #613830). Thanks, Enrico! + + -- Cyril Brulebois Fri, 18 Feb 2011 12:44:23 +0100 + +xserver-xorg-video-intel (2:2.14.0-3) unstable; urgency=low + + * Switch to dh: + - Use debhelper 8. + - Use dh-autoreconf. + - Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf + debhelper sequence. + - Specify usr/share/man in .install, remove .manpages accordingly. + - Specify NEWS and README in .docs file. + * Get rid of maintainer scripts, since they were only used to handle + switching between versions with or without KMS. Starting with squeeze, + KMS is mandatory, so stop worrying about that. + * Remove xsfbs accordingly. + * Remove leftovers: + - NEWS file is outdated, UMS is no longer available, and that's + covered by README.Debian + - The .install.hurd-i386 file is no longer relevant, this package is + now Linux-only. + * Update Uploaders list. Thanks, David & Brice! + * Remove long obsolete Replaces. + * Wrap Depends/Provides/Recommends. + * Bump Standards-Version to 3.9.1 (no changes needed). + + -- Cyril Brulebois Sat, 05 Feb 2011 14:47:04 +0100 + +xserver-xorg-video-intel (2:2.14.0-2) experimental; urgency=low + + * Cherry-pick from upstream to fix many rendering issues + (https://bugs.freedesktop.org/show_bug.cgi?id=33650): + - uxa: Undo damage translation before appending + + -- Cyril Brulebois Fri, 04 Feb 2011 15:37:47 +0100 + +xserver-xorg-video-intel (2:2.14.0-1) experimental; urgency=low + + * New upstream release. + + -- Cyril Brulebois Sat, 08 Jan 2011 18:10:23 +0100 + +xserver-xorg-video-intel (2:2.13.903-1) experimental; urgency=low + + [ Robert Hooker ] + * Add libudev-dev to the build deps for monitor hotplug detection + events. + + [ Cyril Brulebois ] + * New upstream release candidate. + * Bump libdrm-dev build-dep. + * Drop libdrm-from-sid-is-ok.diff accordingly. + + -- Cyril Brulebois Tue, 04 Jan 2011 15:43:17 +0100 + +xserver-xorg-video-intel (2:2.13.901-2) experimental; urgency=low + + * Build against Xserver 1.9.1 rc1. + + -- Cyril Brulebois Tue, 09 Nov 2010 15:53:43 +0100 + +xserver-xorg-video-intel (2:2.13.901-1) experimental; urgency=low + + * New upstream release candidate. + * Bump build-dep on libdrm-dev: 2.4.22-2 contains some cherry-picked + changes to allow this release candidate to build and run. + * Drop patch: i8xx-shadow.diff + + -- Cyril Brulebois Tue, 09 Nov 2010 14:54:21 +0100 + +xserver-xorg-video-intel (2:2.13.0-2) unstable; urgency=low + + [ Cyril Brulebois ] + * Merge from experimental. + * Lower build-dep on libdrm-dev from 2.4.22 to 2.4.21-1~squeeze3 since + the latter contains the needed bits, making it possible to build + within unstable. + * Add patch to make configure.ac happy: libdrm-from-sid-is-ok.diff + * Add README.Debian documenting the need for a kernel driver to handle + modesetting. + * Drop shadow-no-dri2.diff, obsoleted by upstream's 537e73f3. + + [ Julien Cristau ] + * Update i8xx-shadow.diff. + + -- Cyril Brulebois Sun, 07 Nov 2010 19:51:56 +0100 + +xserver-xorg-video-intel (2:2.13.0-1) experimental; urgency=low + + [ Sven Joachim ] + * New upstream release. + * Bump libdrm build-dependency to 2.4.22. + + [ Cyril Brulebois ] + * Bump xutils-dev build-dependency to 1:7.5+4 (needed for xorg macros + 1.8). + * Picked from unstable to avoid introducing back binaries on non-Linux + architectures: UMS is gone, this means Linux-only. + * Add myself to Uploaders. + + -- Cyril Brulebois Sat, 02 Oct 2010 09:51:48 +0200 + +xserver-xorg-video-intel (2:2.12.0+shadow-2) unstable; urgency=low + + * UMS is gone, this means Linux-only (closes: 597845). + + -- Julien Cristau Thu, 23 Sep 2010 16:40:26 +0200 + +xserver-xorg-video-intel (2:2.12.0+shadow-1) unstable; urgency=low + + * Revert the come-back of UMS. Update to upstream HEAD instead. + Closes: #594623, #594338. + * Dropping UMS means its bugs are irrelevant, so this closes: #570766, + #594815. + * Bump libdrm build-dep for DRM_MODE_CONNECTOR_eDP. + * Don't enable DRI2 if the shadow option is on. + * Use shadowfb on i8xx by default. Hopefully closes: #570988, #572105, + #576848, #592586, #593293. + * New upstream doesn't assert() when running sm (closes: #593199). + + -- Julien Cristau Mon, 20 Sep 2010 19:44:14 +0200 + +xserver-xorg-video-intel (2:2.12.0+legacy1-1) unstable; urgency=low + + * Merge from people.freedesktop.org/~ickle/xf86-video-intel:legacy. + This reintroduces UMS and EXA for legacy chips, while allowing us to get + the fixes and new hw support from 2.12. + + -- Julien Cristau Tue, 24 Aug 2010 21:33:56 +0200 + +xserver-xorg-video-intel (2:2.12.0-1) experimental; urgency=low + + * New upstream release. + + Fix Xv distortion, closes: #581705. + * Bump libdrm build-dependency to 2.4.21. + + -- Brice Goglin Sat, 26 Jun 2010 00:26:59 +0200 + +xserver-xorg-video-intel (2:2.11.0-1) experimental; urgency=low + + * New upstream release. + + -- Brice Goglin Tue, 30 Mar 2010 07:04:52 +0200 + +xserver-xorg-video-intel (2:2.10.903-1) experimental; urgency=low + + * New upstream release candidate. + + -- Brice Goglin Tue, 23 Mar 2010 07:39:23 +0100 + +xserver-xorg-video-intel (2:2.10.902-1) experimental; urgency=low + + [ Julien Cristau ] + * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no + good reason. Thanks, Colin Watson! + * Remove myself from Uploaders + + [ Brice Goglin ] + * New upstream release candidate, closes: #567829. + + User mode-setting is not supported anymore. + * Bump xutils-dev build dependency for new util-macros. + * Bump libdrm build dependency to 2.4.18-3 for latest i915 drm headers. + * Build depend on libx11-xcb-dev, libxcb-aux0-dev and libxcb-dri2-0-dev + for XVMC. + * Recommends intel-gpu-tools since intel_reg_dumper is not provided + by xserver-xorg-video-intel-dbg anymore. + + -- Brice Goglin Tue, 16 Mar 2010 20:53:53 +0100 + +xserver-xorg-video-intel (2:2.9.1-4) unstable; urgency=medium + + * Update xsfbs, use new ${xviddriver:Depends} subsvar. + + -- Julien Cristau Fri, 14 May 2010 17:44:44 +0200 + +xserver-xorg-video-intel (2:2.9.1-3) unstable; urgency=low + + [ Julien Cristau ] + * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no + good reason. Thanks, Colin Watson! + * Remove myself from Uploaders + * Add a NEWS.Debian entry about KMS. + * Backport KMS video overlay from upstream 2.10 (closes: #565328). + * Bump libdrm-dev build-dep for the above. + + [ Brice Goglin ] + * Bump Standards-Version to 3.8.4, no changes. + + -- Brice Goglin Sun, 21 Mar 2010 10:25:27 +0100 + +xserver-xorg-video-intel (2:2.9.1-2) unstable; urgency=low + + * Upload to unstable. + + -- Julien Cristau Thu, 07 Jan 2010 20:53:45 +0000 + +xserver-xorg-video-intel (2:2.9.1-1+exp1) experimental; urgency=low + + [ Julien Cristau ] + * Enable kernel mode setting by default on linux (closes: #555906). + + [ Brice Goglin ] + * Build against xserver 1.7. + + -- Brice Goglin Wed, 02 Dec 2009 15:50:17 +0100 + +xserver-xorg-video-intel (2:2.9.1-1) unstable; urgency=medium + + * New upstream bugfix release (closes: #508005). + + reverts change from 2.9.0 that broke DVI detection for some people + (closes: #548045) + + -- Julien Cristau Wed, 25 Nov 2009 16:32:29 +0100 + +xserver-xorg-video-intel (2:2.9.0-1) unstable; urgency=low + + * New upstream release. + + -- Brice Goglin Tue, 29 Sep 2009 07:16:54 +0200 + +xserver-xorg-video-intel (2:2.8.99.902-1) experimental; urgency=low + + * New upstream release candidate. + + Fix crash on server regen, closes: #543326. + + -- Brice Goglin Wed, 23 Sep 2009 01:03:49 +0200 + +xserver-xorg-video-intel (2:2.8.1-2) unstable; urgency=low + + * Re-enable render accel on 8xx. The major problem turned out to be related + to agp chipset flushing (see #541307), so hopefully this should work now. + * Add missing xsfclean dependency to debian/rules clean. + * Bump Standards-Version to 3.8.3 (no changes). + * Mention intel_reg_dumper in the debug package's long description. + + -- Julien Cristau Thu, 17 Sep 2009 20:55:47 +0200 + +xserver-xorg-video-intel (2:2.8.1-1) unstable; urgency=low + + * New upstream release. + + Calculate the DVO relative offset in LVDS data entry to get the + DVO timing, closes: #538148. + + Fix sampler indexes on i965 planar video, closes: #513427. + + -- Brice Goglin Wed, 26 Aug 2009 09:50:15 +0200 + +xserver-xorg-video-intel (2:2.8.0-2) unstable; urgency=low + + [ Julien Cristau ] + * Disable UXA render accel on i8xx chips for now. It currently causes + hangs, and doesn't seem likely to get fixed quickly upstream + (closes: #527349). + * Reenable patch system and bring back quilt build-dep. + + -- Brice Goglin Fri, 31 Jul 2009 22:44:13 +0200 + +xserver-xorg-video-intel (2:2.8.0-1) unstable; urgency=low + + * New upstream release. + + Fixes crash at startup if KMS is not used, closes: #537052. + + -- Brice Goglin Tue, 21 Jul 2009 16:23:39 +0200 + +xserver-xorg-video-intel (2:2.7.99.902-1) experimental; urgency=low + + * New upstream release candidate. + + Fix crash in drm_intel_gem_bo_unreference_locked, closes: #535772. + + -- Brice Goglin Tue, 14 Jul 2009 00:17:00 +0200 + +xserver-xorg-video-intel (2:2.7.99.901-2) experimental; urgency=low + + * Pull upstream fix for xvmc build. + * Update build-depends, and reenable xvmc. + + -- Julien Cristau Thu, 11 Jun 2009 18:52:10 +0200 + +xserver-xorg-video-intel (2:2.7.99.901-1) experimental; urgency=low + + * New upstream release candidate. + + -- Brice Goglin Thu, 11 Jun 2009 08:18:49 +0200 + +xserver-xorg-video-intel (2:2.7.99.1-2) experimental; urgency=low + + [ Julien Cristau ] + * Pull from upstream git branch 'master', commit 8e942b70. + * Bump libdrm-dev build-dep to 2.4.11. + * Merge changes from 2:2.7.1-1. + * Bump Standards-Version to 3.8.1. + + [ David Nusinow ] + * Add README.source + + -- Julien Cristau Thu, 28 May 2009 20:10:30 +0200 + +xserver-xorg-video-intel (2:2.7.99.1-1) experimental; urgency=low + + * New upstream release candidate. + * Stop installing libI810XvMC.so and libIntelXvMC.so for now. They are + disabled in configure for now because DRI1 is not supported anymore. + * Install the upstream NEWS file, closes: #524334, #524336. + * Move the -dbg package to section debug. + + -- Brice Goglin Wed, 29 Apr 2009 19:50:26 +0200 + +xserver-xorg-video-intel (2:2.7.1-1) unstable; urgency=low + + [ Brice Goglin ] + * New upstream release. + * Install the upstream NEWS file, closes: #524334, #524336. + * Move the -dbg package to section debug. + + [ David Nusinow ] + * Remove 01_gen_pci_ids.diff. The X server now uses an internal table to + choose a driver during autoconfiguration. + + Disable patch system and remove quilt from build-deps. + + -- Brice Goglin Wed, 13 May 2009 07:14:50 +0200 + +xserver-xorg-video-intel (2:2.7.0-1) unstable; urgency=low + + * New upstream release. + + -- Brice Goglin Thu, 16 Apr 2009 07:11:09 +0200 + +xserver-xorg-video-intel (2:2.6.99.903-1) experimental; urgency=low + + * New upstream release candidate. + * Bump build-dep on libdrm-dev to 2.4.6. + + -- Brice Goglin Sat, 11 Apr 2009 22:45:57 +0200 + +xserver-xorg-video-intel (2:2.6.3-1) unstable; urgency=low + + * New upstream release. + * Bump build-dep on libdrm-dev to 2.4.5. + * Upload to unstable. + * Cherry-pick some patches from upstream git, so this doesn't FTBFS with the + new libdrm (closes: #523125) + + -- Julien Cristau Thu, 09 Apr 2009 10:25:22 +0100 + +xserver-xorg-video-intel (2:2.6.1-1) experimental; urgency=low + + * New upstream release. + * Build against xserver 1.6 rc1. + + -- Julien Cristau Thu, 22 Jan 2009 00:18:25 +0100 + +xserver-xorg-video-intel (2:2.6.0-1) experimental; urgency=low + + * New upstream release. + + -- Brice Goglin Thu, 15 Jan 2009 10:54:17 +0100 + +xserver-xorg-video-intel (2:2.5.99.2-1) experimental; urgency=low + + * New upstream release. + + doesn't crash on EnterVT with libdrm 2.4.3 (closes: #511263) + * Update libdrm-dev build-dep to 2.4.3. + + -- Julien Cristau Wed, 14 Jan 2009 08:08:20 +0100 + +xserver-xorg-video-intel (2:2.5.1-1) experimental; urgency=low + + * New upstream release. + * Wrap build-deps in debian/control. + * Build depend on libdrm-dev on all archs, since it's now required, and bump + the build dep to 2.4.1. + + -- Julien Cristau Sun, 23 Nov 2008 17:02:31 +0100 + +xserver-xorg-video-intel (2:2.4.2-1) experimental; urgency=low + + * Drop the xserver-xorg-video-i810 transitional package. + * Build against xorg-server 1.5. + * New upstream release (no changes from the previous snapshot other than the + version number). + + -- Julien Cristau Thu, 04 Sep 2008 02:49:59 +0200 + +xserver-xorg-video-intel (2:2.4.1-1) experimental; urgency=low + + [ Timo Aaltonen ] + * New upstream release. + + [ Julien Cristau ] + * Pull from 2.4-branch HEAD as of August 24th. + + -- Julien Cristau Sun, 24 Aug 2008 18:28:32 +0200 + +xserver-xorg-video-intel (2:2.4.0-1) experimental; urgency=low + + * New upstream release. + * Refresh patch 01_gen_pci_ids.diff. + * Don't handle the nostrip build option in debian/rules, dh_strip does that; + allow the parallel=n option. + * Run autoreconf at build-time; build-depend on automake, libtool and + xutils-dev. + * Drop the debian revision from the libxvmc-dev build-dep. + + -- Julien Cristau Sun, 27 Jul 2008 13:18:42 +0200 + +xserver-xorg-video-intel (2:2.3.2-3) experimental; urgency=low + + * Build against xserver 1.5 rc5. + + -- Julien Cristau Mon, 14 Jul 2008 01:26:43 +0200 + +xserver-xorg-video-intel (2:2.3.2-2+lenny1) unstable; urgency=low + + * Cherry-pick patches from the 2.4.0 release: + - Add support for Intel 4 series chipsets + - add some quirks to force enable pipe A on some machines: in particular, + all 855GM (closes: #482819), and Lenovo T60 (closes: #487672) + - i810: Remove an effectively unused variable (only used in an incorrect + free()) + - Give asus and eeepc backlight method higher priority + - Don't use the phase shift bits on GM45 + - Fix official name for GM45 chipset + - Improve FBC size checking + - Only initialize integrated TV encoder for mobile chips + - Add no LVDS quirk for Transtec Senyo 610 mini PC + - Thinkpad R60e TV quirk via DMI info + * Fix debian/rules build/patch dependencies. + + -- Julien Cristau Sun, 27 Jul 2008 11:44:09 +0200 + +xserver-xorg-video-intel (2:2.3.2-2) unstable; urgency=high + + * High urgency upload for RC bug fix. + * Update debian/copyright, thanks to Thomas Viehmann for reporting, and + Moritz Muehlenhoff for the thorough analysis (closes: #486340). + * Change the libdrm memory manager check in configure to look for 2.4.0 + instead of 2.3.1, as libdrm 2.3.1 was released without it. + + -- Julien Cristau Thu, 03 Jul 2008 16:55:05 +0200 + +xserver-xorg-video-intel (2:2.3.2-1) unstable; urgency=low + + * New upstream release. + + Revert "Add FIFO watermark regs to register dumper", + closes: #482369, #471413. + + Fix TV programming: add vblank wait after TV_CTL writes, + closes: #485616. + + -- Brice Goglin Wed, 18 Jun 2008 07:16:05 +0200 + +xserver-xorg-video-intel (2:2.3.1-1) unstable; urgency=low + + * New upstream release. + + -- Brice Goglin Mon, 12 May 2008 03:55:45 +0200 + +xserver-xorg-video-intel (2:2.3.0-1) experimental; urgency=low + + * Build-depend on dpkg-dev >= 1.14.17 for dpkg-shlibdeps --warnings. + * New upstream release. + + -- Julien Cristau Wed, 23 Apr 2008 17:53:26 +0200 + +xserver-xorg-video-intel (2:2.2.99.903-1) experimental; urgency=low + + * New upstream release candidate. + + Fix LVDS regression: disable panel fitting on 855GM, + and fix dither setting, closes: #473838. + + -- Brice Goglin Tue, 15 Apr 2008 15:04:32 +0200 + +xserver-xorg-video-intel (2:2.2.99.902-1) experimental; urgency=low + + * New upstream release candidate. + + Disable DRI earlier if fb width > 2048, closes: #465421, #452357. + + -- Brice Goglin Mon, 31 Mar 2008 08:46:32 +0200 + +xserver-xorg-video-intel (2:2.2.99.901-2) experimental; urgency=low + + * Install libIntelXvMC.so. + + -- Brice Goglin Sat, 29 Mar 2008 12:15:14 +0100 + +xserver-xorg-video-intel (2:2.2.99.901-1) experimental; urgency=low + + [ Julien Cristau ] + * Add the ${shlibs:Depends} substvar to the -dbg package's dependencies, to + bring in libpciaccess0 (closes: #467215). + * Only build on x86, this package doesn't make sense anywhere else. + * The Vcs-* fields are now recognized by dpkg, so drop the XS- prefix. + * Bump Standards-Version to 3.7.3 (no changes). + + [ Brice Goglin ] + * New upstream release. + + Fix pciaccess version check, closes: #470266. + + Fix crash on VT switch, closes: #469113. + + Fix video playback on rotated display, closes: #432157. + + -- Brice Goglin Fri, 21 Mar 2008 21:50:59 +0100 + +xserver-xorg-video-intel (2:2.2.1-2) unstable; urgency=low + + * Add the ${shlibs:Depends} substvar to the -dbg package's dependencies, to + bring in libpciaccess0 (closes: #467215). + * Only build on x86, this package doesn't make sense anywhere else. + * The Vcs-* fields are now recognized by dpkg, so drop the XS- prefix. + * configure: check for pciaccess 0.10 instead of 0.10.0 (closes: #470266). + * Run dpkg-shlibdeps with --warnings=6. Drivers reference symbols from + /usr/bin/Xorg and other modules, and that's not a bug, so we want + dpkg-shlibdeps to shut up about symbols it can't find. + + -- Julien Cristau Sun, 13 Apr 2008 02:10:18 +0200 + +xserver-xorg-video-intel (2:2.2.1-1) unstable; urgency=low + + [ Brice Goglin ] + * New upstream release. + + Fix some blinking pixels and unreadable text, closes: #465921. + + Fix i830 stolen memory mask, closes: #464661. + + Fix flickering on i855, closes: #443809, #435621. + + [ Julien Cristau ] + * Build the intel_reg_dumper tool, and install it in the -dbg package. + Add build-dependency on libpciaccess-dev. + + -- Brice Goglin Sat, 23 Feb 2008 00:52:39 +0100 + +xserver-xorg-video-intel (2:2.2.0.90-3) unstable; urgency=low + + * Grab upstream commit 2c8f87be99957e0e18d8bcda46bd8706ab374253 + to unbreak FramebufferCompression on i965. + + -- Brice Goglin Wed, 06 Feb 2008 21:29:44 +0100 + +xserver-xorg-video-intel (2:2.2.0.90-2) unstable; urgency=low + + * Actually pull the new upstream release candidate. + + -- Julien Cristau Wed, 06 Feb 2008 10:27:18 +0100 + +xserver-xorg-video-intel (2:2.2.0.90-1) unstable; urgency=low + + * New upstream stable branch release candidate. Fixes the following bugs: + + server leaves pipe disabled at shutdown / vt switch ; closes: #453374 + + [855GM] need to use BIOS for mode information ; closes: #437066 + + Intel 2.2 crashes if playing a video then switching to another desktop; + closes: #452372 + + [G33] 2.2.0 locks up X with error "First SDVO output reported failure to + sync" ; closes: #451917 + + -- David Nusinow Tue, 05 Feb 2008 21:41:13 -0500 + +xserver-xorg-video-intel (2:2.2.0+git20080107-1) experimental; urgency=low + + * New upstream snapshot + + Clarifies backlight abilities in the manpage. Closes: #451847 + + Will use a functional backlight on older chips now. Newer chips may + benefit from configured to use something other than the legacy setting + though. Closes: #451848 + + Fixes exa rendering corruption on some 855GM laptops. Closes: #439210 + + Xv window hidden for a little while no longer causes segfaults. + Closes: #457587 + + -- David Nusinow Mon, 07 Jan 2008 22:41:51 -0500 + +xserver-xorg-video-intel (2:2.2.0-2) UNRELEASED; urgency=low + + * Conflict with 915resolution. This driver now handles all of this itself + and better. Closes: #452803 + + -- David Nusinow Mon, 03 Dec 2007 21:35:07 -0500 + +xserver-xorg-video-intel (2:2.2.0-1) unstable; urgency=low + + * New upstream release. + + Also pull bugfix commit 4a2b0f340357c4ca58dc9586fad1337b83966362. + + Fix backlight problems on various chipsets, + closes: #443111, #438969, #439744. + + Fix some issues with high resolution, closes: #420840. + * Add myself to Uploaders and remove Branden with his permission. + + -- Brice Goglin Fri, 16 Nov 2007 09:30:26 +0100 + +xserver-xorg-video-intel (2:2.1.99-1) experimental; urgency=low + + [ David Nusinow ] + * Make -i810 arch: all again + + [ Julien Cristau ] + * New upstream release candidate + + fixes VT switch issues (closes: #431373, #436336) + + fixes memory allocation issues (closes: #423416) + + adds support for ch701x LVDS controllers (closes: #438650, #420350, + #424952) + + -- Julien Cristau Sun, 11 Nov 2007 11:16:03 +0100 + +xserver-xorg-video-intel (2:2.1.1-5) unstable; urgency=low + + * Use the same architectures for the -dbg and i810 packages as -intel. + This should allow it to transition to testing. Closes: #449228 + + -- David Nusinow Sun, 04 Nov 2007 09:10:31 -0500 + +xserver-xorg-video-intel (2:2.1.1-4) unstable; urgency=low + + * Upload to unstable + + -- David Nusinow Sun, 16 Sep 2007 16:34:39 -0400 + +xserver-xorg-video-intel (2:2.1.1-3) experimental; urgency=low + + * Shorten the short description of the -dbg package a bit (thanks, Marc 'HE' + Brockschmidt). + * Rebuild for xserver 1.4. + + -- Julien Cristau Wed, 12 Sep 2007 11:21:49 +0200 + +xserver-xorg-video-intel (2:2.1.1-2) experimental; urgency=low + + [ Julien Cristau ] + * Build against xserver 1.3.99.0. + + [ David Nusinow ] + * Add 01_gen_pci_ids.diff. This patch has the driver generate a list of pci + id's that it supports and installs it where the X server can find it. The + server with appropriate support will be able to automatically determine if + the intel driver is the proper driver to load when no driver is specified + in xorg.conf. + + -- Julien Cristau Sun, 19 Aug 2007 03:21:24 +0200 + +xserver-xorg-video-intel (2:2.1.1-1) unstable; urgency=low + + * New upstream release. + + manpage typo fixed (closes: #432061). Thanks, A Costa! + + adds quirk for TV output on some 965-based laptops (closes: #434297). + + -- Julien Cristau Tue, 14 Aug 2007 12:48:02 +0200 + +xserver-xorg-video-intel (2:2.1.0-2) unstable; urgency=low + + [ Brice Goglin ] + * Fix XvMC support for only i810 and i815 in the long description. + * Build a xserver-xorg-video-intel-dbg package with debugging symbols. + + [ Julien Cristau ] + * Add upstream URL in the copyright file (thanks, Loïc Minier). + + -- Julien Cristau Mon, 09 Jul 2007 14:25:25 +0200 + +xserver-xorg-video-intel (2:2.1.0-1) unstable; urgency=low + + * New upstream release. + * Actually install the upstream README. + + -- Julien Cristau Tue, 03 Jul 2007 11:19:48 +0200 + +xserver-xorg-video-intel (2:2.0.0-6) experimental; urgency=low + + * Update to latest upstream (commit 1e2e3013). + * Add myself to uploaders. + + -- Julien Cristau Mon, 02 Jul 2007 03:08:51 +0200 + +xserver-xorg-video-intel (2:2.0.0-5) experimental; urgency=low + + [ Drew Parsons ] + * The upstream README file looks interesting, include it with docs. + + [ Julien Cristau ] + * Pull in latest upstream git. + + -- Julien Cristau Fri, 22 Jun 2007 03:58:48 +0100 + +xserver-xorg-video-intel (2:2.0.0-4) experimental; urgency=low + + [ Julien Cristau ] + * Update watch file (s/i810/intel/). + + [ Drew Parsons ] + * Pull in latest upstream git (probably contains final Xv fix). + Closes: #417860. + + -- Drew Parsons Tue, 05 Jun 2007 18:35:50 +1000 + +xserver-xorg-video-intel (2:2.0.0-3) experimental; urgency=low + + * Pull in latest upstream git (updated Xv fix) + + -- Drew Parsons Wed, 30 May 2007 12:20:45 +1000 + +xserver-xorg-video-intel (2:2.0.0-2) experimental; urgency=low + + [ Julien Cristau ] + * Build xserver-xorg-video-i810 in binary-indep instead of binary-arch + (closes: #420240). Thanks, Aaron M. Ucko! + * Mention i965 chipsets in the long description. + + [ Timo Aaltonen ] + * Replaces/Conflicts: xserver-xorg-driver-i810. + + [ Drew Parsons ] + * Pull in latest upstream git + - Restores Xv video overlay. Closes: #417860, #420281 + * autoreconf + + -- Drew Parsons Sat, 26 May 2007 18:08:33 +1000 + +xserver-xorg-video-intel (2:2.0.0-1) unstable; urgency=low + + * New upstream release. + * Add XS-Vcs-*. + * Bump build-dep on xserver-xorg-dev to >= 2:1.3.0.0. + * Remove Fabio from Uploaders, with his permission. + * Install the bug script in the xserver-xorg-video-intel dir instead of + -i810. + * Install the upstream changelog. + * Upload to unstable. + + -- Julien Cristau Fri, 20 Apr 2007 08:54:20 +0200 + +xserver-xorg-video-intel (2:1.9.94-1) experimental; urgency=low + + * New upstream release candidate. + + -- Julien Cristau Tue, 03 Apr 2007 11:36:43 +0200 + +xserver-xorg-video-intel (2:1.9.93-1) experimental; urgency=low + + * New upstream release candidate. + + bump build-dep on xserver-xorg-dev to >= 2:1.2.99.903. + + -- Julien Cristau Tue, 27 Mar 2007 08:25:39 +0200 + +xserver-xorg-video-intel (2:1.9.92-1) experimental; urgency=low + + * New upstream release candidate. + * Build-depend on xserver-xorg-dev 1.3rc2. + + -- Julien Cristau Thu, 15 Mar 2007 14:38:06 +0100 + +xserver-xorg-video-intel (2:1.9.91-2) experimental; urgency=low + + * Revert commit c2c62559e702e7de1fa2ef309fa647ab13564dc3 "Move + single mode setting code to X server." Brings i830PipeFindClosestMode + back into a consistent state. Closes: #414612. + * autoreconf and git-add Makefile.in files in ./src subdirectories. + + -- Drew Parsons Tue, 13 Mar 2007 22:49:18 +1100 + +xserver-xorg-video-intel (2:1.9.91-1) experimental; urgency=low + + * Bump build-dep on libdrm-dev to >= 2.2. Thanks, Marc 'HE' Brockschmidt! + * New upstream release candidate. + * Rename from -i810 to -intel to follow upstream naming. + * (Build-)Depend on a newer xserver. + + -- Julien Cristau Thu, 8 Mar 2007 18:55:05 +0100 + +xserver-xorg-video-i810 (2:1.7.4-1) experimental; urgency=low + + [ David Nusinow ] + * New upstream version + * Generate Provides: line automatically + * Bump xserver-xorg-core build-depend to 2:1.2.0-6 to handle this properly + + [ Julien Cristau ] + * Drop duplicate build dependency on libdrm-dev, so this really + closes: #383918. + * Add support for the armeb and armel architectures, thanks to Riku Voipio + (closes: #408797). + * Drop all our patches, applied upstream. + * debian/rules clean needs to depend on xsfclean. + * Generate the dependency on xserver-xorg-core automatically. + + -- David Nusinow Sun, 4 Mar 2007 18:20:38 -0500 + +xserver-xorg-video-i810 (2:1.7.2-4) unstable; urgency=low + + [ Julien Cristau ] + * Don't build-dep on libdrm-dev on hurd-i386, and don't try to install + the libI810XvMC library there, as it isn't built without drm. Thanks to + Samuel Thibault for the patch! (closes: #383918) + + [ Drew Parsons ] + * Apply patch 20-i915_bios.patch from upsteam (1.7.4) to help with faulty + BIOSes (where VBE initialization failed). Closes: #382120. + + -- Drew Parsons Sat, 20 Jan 2007 02:29:30 +1100 + +xserver-xorg-video-i810 (2:1.7.2-3) unstable; urgency=low + + * Build-Depends: quilt, needed to apply patches. + * Replace the cvs source url in the long description with an XS-Vcs-Git + control field and a reference to the xf86-video-intel module. + Added a link to www.X.org. + + -- Drew Parsons Wed, 6 Dec 2006 12:52:18 +1100 + +xserver-xorg-video-i810 (2:1.7.2-2) unstable; urgency=low + + [ Julien Cristau ] + * Add link to xserver-xorg-core bug script, so that bugreports contain + the user's config and log files. + * Bump dependency on xserver-xorg-core to >= 2:1.1.1-11, as previous + versions don't have the bug script. + + [ Drew Parsons ] + * Apply upstream patch 1-overlay_fix_lockup.patch (git commit + e065324661ad08b3b359136f48090232f6138959, upstream bug #5774). + Should remove remaining lockup problems in I830WaitLpRing(). + Closes: #272294. + * While we're at it, apply upstream patch 11-xv_lockup.patch (git + commit fbb376bd1a4daad4c86e349df98438989ce173f1, upstream bug + #8594), fixing lockups related to Xv. We'll have no lockup bugs + in etch, dammit! Closes: #397485. + + -- Drew Parsons Wed, 6 Dec 2006 11:50:10 +1100 + +xserver-xorg-video-i810 (2:1.7.2-1) unstable; urgency=low + + * New upstream version + + Shipping the git log as part of our diff.gz rather than a separate patch + since upstream didn't include an updated Changelog + + -- David Nusinow Fri, 13 Oct 2006 14:33:20 -0400 + +xserver-xorg-video-i810 (2:1.6.5-4) UNRELEASED; urgency=low + + * Typo fix in man page. Closes: #364559. + + -- Drew Parsons Thu, 21 Sep 2006 23:21:14 +1000 + +xserver-xorg-video-i810 (2:1.6.5-3) unstable; urgency=low + + [ Steve Langasek ] + * Upload to unstable + + [ Drew Parsons ] + * Standards version 3.7.2. + * Use debhelper 5. + * Use dh_installman to install man pages. + * Exclude .la from dh_install. + + -- David Nusinow Mon, 18 Sep 2006 19:57:38 -0400 + +xserver-xorg-video-i810 (2:1.6.5-2) experimental; urgency=low + + [ Drew Parsons ] + * Provides: xserver-xorg-video-1.0 not xserver-xorg-video. + + [ David Nusinow ] + * Bump xserver (build-)depends epochs to 2: to deal with botched + server upload + + -- David Nusinow Tue, 22 Aug 2006 23:46:32 +0000 + +xserver-xorg-video-i810 (2:1.6.5-1) experimental; urgency=low + + * New upstream release + + -- David Nusinow Thu, 10 Aug 2006 22:53:34 +0000 + +xserver-xorg-video-i810 (2:1.6.4-1) experimental; urgency=low + + * New upstream release + + -- David Nusinow Wed, 9 Aug 2006 22:37:24 +0000 + +xserver-xorg-video-i810 (2:1.6.3-1) experimental; urgency=low + + * New upstream release + * Add x11proto-xinerama-dev to build-dep + + -- David Nusinow Tue, 8 Aug 2006 22:01:43 +0000 + +xserver-xorg-video-i810 (2:1.6.1-2) experimental; urgency=low + + * Fix for botched upload. Identical to -1, which I built wrong. + + -- David Nusinow Sun, 6 Aug 2006 18:37:45 +0000 + +xserver-xorg-video-i810 (2:1.6.1-1) experimental; urgency=low + + [ Andres Salomon ] + * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build; + idempotency fix. + * Run dh_install w/ --list-missing. + + [ David Nusinow ] + * New upstream version + * Bump dependency on xserver-xorg-core to >= 1:1.1.1. Do the same thing for + the build-dep on xserver-xorg-dev. + + -- David Nusinow Sun, 6 Aug 2006 17:29:12 +0000 + +xserver-xorg-video-i810 (2:1.4.1.3-1) unstable; urgency=low + + * Roll back the version to what was released with 7.0. Stupid ABI + incompatibilities. (closes: #359328) + * Add call to dh_makeshlibs. Reorder dh_installdeb and dh_shlibdeps so that + ldconfig is called during postinst. Thanks Justin Pryzby and Steve + Langasek. (closes: #364012) + + -- David Nusinow Sat, 22 Apr 2006 18:21:51 -0400 + +xserver-xorg-video-i810 (1:1.5.1.0-2) unstable; urgency=low + + * Upload to modular + + -- David Nusinow Sun, 26 Mar 2006 20:25:40 -0500 + +xserver-xorg-video-i810 (1:1.5.1.0-1) experimental; urgency=low + + * New upstream release + + -- David Nusinow Tue, 21 Mar 2006 22:40:04 -0500 + +xserver-xorg-video-i810 (1:1.4.1.3-3) experimental; urgency=low + + * Version build dependency on libxvmc-dev. Thanks John Hughes. + (closes: #358165) + + -- David Nusinow Tue, 21 Mar 2006 20:49:27 -0500 + +xserver-xorg-video-i810 (1:1.4.1.3-2) experimental; urgency=low + + * Don't build on sparc. Partial port of + sparc/103_sparc_dont_build_useless_drivers.diff. + + -- David Nusinow Sun, 5 Mar 2006 20:32:01 -0500 + +xserver-xorg-video-i810 (1:1.4.1.3-1) experimental; urgency=low + + * First upload to Debian + * Change source package, package, and provides names to denote the + type of driver and that they are for xserver-xorg + + -- David Nusinow Fri, 13 Jan 2006 00:37:39 -0500 + +xserver-xorg-driver-i810 (1:1.4.1.3-0ubuntu1) dapper; urgency=low + + * New upstream release. + * Add provides on xserver-xorg-driver. + + -- Daniel Stone Wed, 4 Jan 2006 19:57:22 +1100 + +xserver-xorg-driver-i810 (1:1.4.1.2-0ubuntu1) dapper; urgency=low + + * New upstream release. + + -- Daniel Stone Mon, 19 Dec 2005 09:06:03 +1100 + +xserver-xorg-driver-i810 (1:1.4.1.1-0ubuntu1) dapper; urgency=low + + * New upstream release. + * Bump Build-Depends on libdrm-dev to >> 2.0. + + -- Daniel Stone Mon, 12 Dec 2005 13:20:11 +1100 + +xserver-xorg-driver-i810 (1:1.4.1-0ubuntu2) dapper; urgency=low + + * Add missing Build-Depends (x11proto-core-dev, x11proto-fonts-dev, + x11proto-randr-dev, x11proto-render-dev, libdrm (>> 1.0.5), + x11proto-xf86dri-dev). + + -- Daniel Stone Mon, 5 Dec 2005 12:54:24 +1100 + +xserver-xorg-driver-i810 (1:1.4.1-0ubuntu1) dapper; urgency=low + + * New upstream release. + + -- Daniel Stone Tue, 22 Nov 2005 13:30:52 +1100 + +xserver-xorg-driver-i810 (1:1.4.0.1-1) dapper; urgency=low + + * New upstream version. + + -- Daniel Stone Thu, 20 Oct 2005 13:37:40 +1000 + +xserver-xorg-driver-i810 (1:1.4.0-1) breezy; urgency=low + + * First xserver-xorg-driver-i810 release. + + -- Daniel Stone Wed, 6 Jul 2005 15:48:17 +1000 --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/control +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/control @@ -0,0 +1,70 @@ +Source: xserver-xorg-video-intel +Section: x11 +Priority: optional +Maintainer: Debian X Strike Force +Uploaders: + Drew Parsons , + Michael Stapelberg , + maximilian attems , + Vincent Cheng , +Build-Depends: + debhelper-compat (= 12), + pkg-config, + xserver-xorg-dev (>= 2:1.11.99.901), + x11proto-dev, + libx11-dev, + libdrm-dev (>= 2.4.23), + libgl1-mesa-dev | libgl-dev, + libpciaccess-dev (>= 0.8.0+git20071002), +# following are only needed for xvmc: + libxvmc-dev (>= 2:1.0.12), + libxext-dev, + libxfixes-dev, + libx11-xcb-dev, + libxcb-util0-dev, + libxcb-dri2-0-dev, +# end xvmc + libudev-dev [linux-any], + quilt, + xutils-dev (>= 1:7.5+4), + valgrind [amd64 arm64 armhf i386 mips mipsel mips64 mips64el powerpc ppc64 ppc64el s390x x32], +# intel-virtual-output: + libxinerama-dev, + libxrandr-dev, + libxdamage-dev, + libxcursor-dev, + libxtst-dev, + libxrender-dev, + libpixman-1-dev, + libxss-dev, +# dri3info: +# libxcomposite-dev, +# tests, benchmarks: +# libcairo2-dev, +# libpng12-dev, +Standards-Version: 4.5.0 +Vcs-Git: https://salsa.debian.org/xorg-team/driver/xserver-xorg-video-intel.git +Vcs-Browser: https://salsa.debian.org/xorg-team/driver/xserver-xorg-video-intel +Homepage: https://www.x.org/ + +Package: xserver-xorg-video-intel +Architecture: amd64 i386 kfreebsd-amd64 kfreebsd-i386 x32 +Depends: + ${shlibs:Depends}, + ${misc:Depends}, + ${xviddriver:Depends}, +Provides: + ${xviddriver:Provides} +Description: X.Org X server -- Intel i8xx, i9xx display driver + This package provides the driver for the Intel i8xx and i9xx family + of chipsets, including i810, i815, i830, i845, i855, i865, i915, i945 + and i965 series chips. + . + This package also provides XvMC (XVideo Motion Compensation) drivers + for i810/i815 and i9xx and newer chipsets. + . + This package is built from the X.org xf86-video-intel driver module. + . + The use of this driver is discouraged if your hw is new enough (ca. + 2007 and newer). You can try uninstalling this driver and let the + server use its builtin modesetting driver instead. --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/copyright +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/copyright @@ -0,0 +1,661 @@ +This package was downloaded from +https://xorg.freedesktop.org/releases/individual/driver/ + +This copyright file is based on xf86-video-intel 2.3.1. + +The files under src/modes/ and src/parser/ are stolen from the xorg-server +source. + +The authors of this core are, see below for copyright declarations. + +* Alan Hourihane / +* Bob Paauwe +* Dave Airlie +* Dave Mueller +* David Dawes +* Eric Anholt +* Jens Owen +* Jesse Barnes +* Jonathan Bian +* Keith Packard +* Keith Whitwell +* Kevin E. Martin / +* Kristian Høgsberg +* Luc Verhaegen +* Matt Sottek +* Rickard E. (Rik) Faith +* Thomas Hellstrom +* Wang Zhenyu +* Xiang Haihao + +==== + +Most of the code is covered by the MIT/X11 license: + +- +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +- + +The copyright holders are: + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas: +src/legacy/i810/i810_accel.c +src/legacy/i810/i810_wmark.c +src/legacy/i810/i810_reg.h +src/legacy/i810/i810_driver.c +src/legacy/i810/i810_memory.c +src/legacy/i810/i810_cursor.c +src/legacy/i810/i810_xaa.c +src/i830_xaa.c +src/i830_exa.c + +* Copyright © 1999 Keith Packard +src/uxa/uxa-unaccel.c + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. +* Copyright 2000 VA Linux Systems, Inc. +src/xvmc/xf86dri.h +src/xvmc/xf86dri.c + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. +* Copyright 2002 David Dawes +src/uxa/intel_memory.c +src/i830_ring.h +src/i830_cursor.c +src/legacy/i810_ring.h +src/legacy/i810.h +src/uxa/common.h +src/xvmc/xf86dristr.h +src/uxa/intel.h +src/uxa/intel_batchbuffer.h + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. +* Copyright © 2010 Intel Corporation +src/intel_module.c + +* Copyright 2000 Intel Corporation. All Rights Reserved: +src/legacy/i810_hwmc.c +src/legacy/i810_video.c +src/uxa/intel_video.c +src/uxa/intel_video.h +src/sna/sna_video.h + +* Copyright ® 2001 Keith Packard +src/uxa/uxa-accel.c +src/uxa/uxa-render.c +src/uxa/uxa.c + +* Copyright 2001 Intel Corporation. All Rights Reserved. +src/legacy/i810/xvmc/I810XvMC.h +src/legacy/i810/xvmc/I810XvMC.c + +* Copyright 2001 VA Linux Systems Inc., Fremont, California. +* Copyright 2002 Tungsten Graphics Inc., Cedar Park, Texas. +src/i830_common.h + +* Copyright 2001 VA Linux Systems Inc., Fremont, California +* Copyright 2002 by David Dawes +src/sna/sna_dri.c +src/uxa/intel_dri.c +src/uxa/intel_driver.c + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas +* Copyright 2002 David Dawes +src/sna/sna.h + +* Copyright 2000 Intel Corporation. All Rights Reserved +* Copyright 2002 by Alan Hourihane and David Dawes +src/sna/sna_video.c + +* Copyright 2001 VA Linux Systems Inc., Fremont, California +* Copyright 2002 by David Dawes +src/sna/sna_driver.c + +* Copyright 2002 David Dawes +* Copyright 2006 Intel Corporation +src/i830_modes.c + +* Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas. +src/legacy/i810_common.h + +* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. +src/uxa/i830_reg.h +src/uxa/i830_3d.c +src/uxa/i915_reg.h +src/uxa/i965_reg.h +src/sna/gen2_render.h +src/sna/gen3_render.h +src/sna/gen4_render.h +src/sna/gen5_render.h +xvmc/i830_reg.h +xvmc/i915_reg.h +xvmc/intel_batchbuffer.c + +* Copyright 2005 Tungsten Graphics, Inc., Cedar Park, Texas. +src/uxa/brw_structs.h +src/uxa/brw_defines.h + +* Copyright 2005 Red Hat, Inc. +src/i830_io.c + +* Copyright 2005 Adam Jackson: +src/Makefile.am + +* Copyright (c) 2005 Jesse Barnes +src/i830_exa.c + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas +* Copyright 2005 Jesse Barnes +src/uxa/intel_uxa.c + +* Copyright 2005 Thomas Hellstrom. All rights reserved. +src/xvmc/driDrawable.c +src/xvmc/driDrawable.h + +* Copyright 2005-2006 Luc Verhaegen. +src/modes/xf86cvt.c + +* Copyright 2006 Luc Verhaegen. +src/modes/xf86EdidModes.c + +* Copyright 2006 Dave Airlie +src/i830_i2c.c +src/i830_sdvo.c +src/i830_dvo.c +src/sil164/sil164.c +src/sil164/sil164.h +src/sil164/sil164_reg.h +src/ch7xxx/ch7xxx_reg.h +src/ch7xxx/ch7xxx.c +src/ch7xxx/ch7xxx.h + +* Copyright 2006 Intel Corporation: +xvmc/i915_xvmc.c +xvmc/i915_xvmc.h +xvmc/i915_structs.h +src/i915_hwmc.h +src/uxa/i915_video.c +src/uxa/i915_3d.h +src/uxa/i915_render.c +src/uxa/intel_batchbuffer.c +src/exa_wm.g4i +src/exa_wm_src_sample_argb.g4a +src/exa_wm_mask_affine.g4a +src/exa_wm_projective.g4i +src/exa_sf.g4a +src/exa_wm_affine.g4i +src/exa_wm_mask_sample_a.g4a +src/exa_sf_mask.g4a +src/exa_wm_write.g4a +src/exa_wm_mask_sample_argb.g4a +src/exa_wm_ca.g4a +src/exa_wm_src_affine.g4a +src/exa_wm_xy.g4a +src/exa_wm_noca.g4a +src/exa_wm_ca_srcalpha.g4a +src/exa_wm_mask_projective.g4a +src/exa_wm_src_sample_a.g4a +src/exa_wm_src_projective.g4a +src/i830_lvds.c +src/i830_sdvo.h +src/i830_bios.c +src/i830_bios.h +src/i830_debug.c +src/i830_crt.c +src/i830_display.c +src/i830_sdvo_regs.h +src/uxa/i830_render.c +src/i830_tv.c +src/i830_display.h +src/i830_debug.h +src/packed_yuv_sf.g4a +src/packed_yuv_wm.g4a +src/uxa/i965_video.c +src/ch7017/ch7017.c +src/ch7017/ch7017_reg.h +src/sil164/Makefile.am +src/modes/xf86Modes.h +src/ivch/ivch.c +src/ivch/ivch_reg.h +src/ivch/ivch_module.c +src/sna/brw/brw_eu.c +src/sna/brw/brw_eu.h +src/sna/brw/brw_emit.c + +* Copyright 2007 Intel Corporation: +src/bios_reader/bios_dumper.c +src/bios_reader/bios_reader.c +src/i830_quirks.c +xvmc/intel_xvmc.c +xvmc/intel_xvmc.h +xvmc/intel_xvmc_private.h +src/sna/sna_video_hwmc.c +src/sna/sna_video_hwmc.h +src/uxa/intel_hwmc.c + +* Copyright 2007 Dave Mueller +src/tfp410/tfp410.c +src/tfp410/tfp410.h +src/tfp410/tfp410_reg.h + +* Copyright 2007 Red Hat, Inc +src/uxa/intel_display.c + +* Copyright 2007 Red Hat, Inc +* Copyright 2006,2008 Intel Corporation +src/uxa/i965_render.c + +* Copyright © 2008 Intel Corporation +xvmc/i965_xvmc.c +xvmc/intel_xvmc_dump.c + +* Copyright © 2008 Keith Packard +src/sna/brw/brw_disasm.c + +* Copyright © 2000,2008 Keith Packard +* Copyright 2005 Zack Rusin, Trolltech +src/uxa/uxa-priv.h + +* Copyright © 2000, 2008 Keith Packard +* Copyright 2004 Eric Anholt +* Copyright 2005 Zack Rusin +src/uxa/uxa.h + + +* Copyright © 2009 Intel Corporation +src/sna/atomic.h +xvmc/xvmc_vld.c + +* Copyright © 2010-2012 Intel Corporation +* Copyright © 2010 Francisco Jerez +src/intel_list.h + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. All Rights Reserved +* Copyright 2005 Jesse Barnes +* Copyright 2010 Intel Corporation +src/sna/sna_transform.c + +* Copyright © 2006,2010 Intel Corporation +src/uxa/i915_3d.h + +* Copyright 2010 Intel Corporation +src/render_program/exa_wm_mask_affine.g5a +src/render_program/exa_wm_mask_affine.g6a +src/render_program/exa_wm_mask_affine.g7a +src/render_program/exa_wm_mask_projective.g6a +src/render_program/exa_wm_mask_projective.g7a +src/render_program/exa_wm_src_affine.g5a +src/render_program/exa_wm_src_affine.g6a +src/render_program/exa_wm_src_affine.g7a +src/render_program/exa_wm_src_projective.g6a +src/render_program/exa_wm_src_projective.g7a +src/sna/sna_gradient.c +src/sna/sna_tiling.c +src/uxa/uxa-glyphs.c + +* Copyright 2010-2011 Intel Corporation +src/render_program/exa_wm_affine.g6i +src/sna/gen3_render.c + +* Copyright 2000-2011 Intel Corporation. All Rights Reserved +src/sna/sna_video_overlay.c +src/sna/sna_video_sprite.c +src/sna/sna_video_textured.c + +* Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas +* Copyright 2005 Jesse Barnes +* Copyright 2009-2011 Intel Corporation +src/sna/sna_blt.c + +* Copyright 2007 Red Hat, Inc +* Copyright 2006,2008,2011 Intel Corporation +src/sna/gen4_render.c +src/sna/gen5_render.c +src/sna/gen7_render.c +src/sna/gen6_render.c + +* Copyright 2006,2011 Intel Corporation +src/sna/gen2_render.c + +* Copyright 2007-2011 Intel Corporation +src/sna/kgem_debug.c +src/sna/kgem_debug_gen2.c +src/sna/kgem_debug_gen3.c +src/sna/kgem_debug_gen4.c +src/sna/kgem_debug_gen5.c +src/sna/kgem_debug_gen6.c +src/sna/kgem_debug_gen7.c + +* Copyright 2007 David Turner +* Copyright 2008 M Joonas Pihlaja +* Copyright 2011 Intel Corporation +src/sna/sna_trapezoids_precise.c +src/sna/sna_trapezoids.c +src/sna/sna_trapezoids_boxes.c +src/sna/sna_trapezoids_imprecise.c +src/sna/sna_trapezoids_mono.c + + + +* Copyright © 2011 Intel Corporation +src/sna/blt.c +src/sna/brw/brw_test.c +src/sna/brw/brw_test.h +src/sna/brw/brw_test_gen4.c +src/sna/brw/brw_test_gen5.c +src/sna/brw/brw_test_gen6.c +src/sna/brw/brw_test_gen7.c +src/sna/compiler.h +src/sna/kgem.c +src/sna/kgem.h +src/sna/sna_accel.c +src/sna/sna_composite.c +src/sna/sna_damage.c +src/sna/sna_io.c +src/sna/sna_render.c +src/sna/sna_stream.c +src/uxa/i965_3d.c +src/uxa/intel_glamor.c +src/uxa/intel_glamor.h + +* Copyright © 1998 Keith Packard +* Copyright © 2012 Intel Corporation +src/sna/fb/fb.h +src/sna/fb/fbarc.c +src/sna/fb/fbarcbits.h +src/sna/fb/fbbitmap.c +src/sna/fb/fbblt.c +src/sna/fb/fbbltone.c +src/sna/fb/fbcopy.c +src/sna/fb/fbfill.c +src/sna/fb/fbgc.c +src/sna/fb/fbglyph.c +src/sna/fb/fbglyphbits.h +src/sna/fb/fbimage.c +src/sna/fb/fbline.c +src/sna/fb/fblinebits.h +src/sna/fb/fbpoint.c +src/sna/fb/fbpointbits.h +src/sna/fb/fbpush.c +src/sna/fb/fbrop.h +src/sna/fb/fbseg.c +src/sna/fb/fbsegbits.h +src/sna/fb/fbspan.c +src/sna/fb/fbstipple.c +src/sna/fb/fbtile.c +src/sna/fb/fbutil.c + +* Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. +* Copyright © 2012 Intel Corporation +src/sna/fb/fbpict.h + +* Copyright © 2000 SuSE, Inc. +* Copyright © 2007 Red Hat, Inc. +* Copyright © 2012 Intel Corporation +src/sna/fb/fbpict.c + +* Copyright 2000 SuSE, Inc +* Copyright 2008 Red Hat, Inc +* Copyright 2010 Intel Corporation +src/sna/sna_glyphs.c + +* Copyright 2012 Red Hat, Inc. +src/compat-api.h +src/sna/fb/fbclip.c +src/sna/fb/fbclip.h + +* Copyright 2012 Intel Corporation +src/sna/gen4_vertex.c + +* Copyright 2013 Intel Corporation +src/i915_pciids.h +src/intel_device.c +src/sna/sna_acpi.c +src/sna/sna_cpu.c +src/sna/sna_cpuid.h +src/sna/sna_display_fake.c +src/sna/sna_threads.c +src/sna/sna_vertex.c +tools/virtual.c + +* Copyright 2007 Red Hat, Inc +* Copyright 2013 Intel Corporation +src/sna/sna_display.c + +* Copyright 2011,2012,2013 Intel Corporation +src/sna/gen4_source.c + +* Copyright 2011-2013 Intel Corporation +src/sna/gen4_common.c +src/sna/gen4_common.h +src/sna/gen6_common.c +src/sna/gen6_common.h + +==== + +src/legacy/i810_dga.c is Copyright 2000 by Alan Hourihane, Sychdyn, North Wales, UK +and covered by the following license: + +- + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that + * copyright notice and this permission notice appear in supporting + * documentation, and that the name of Alan Hourihane not be used in + * advertising or publicity pertaining to distribution of the software without + * specific, written prior permission. Alan Hourihane makes no representations + * about the suitability of this software for any purpose. It is provided + * "as is" without express or implied warranty. + * + * ALAN HOURIHANE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL ALAN HOURIHANE BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. +- + +==== +A few files a covered by the following license: + +- + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. +- + +The copyright holders are: + +* Copyright 2002 Keith Packard, member of The XFree86 Project, Inc. +src/modes/xf86RandR12.c + +* Copyright 2006 Keith Packard +src/modes/xf86Crtc.c +src/modes/xf86RandR12.h +src/modes/xf86Rename.h +src/local_xf86Rename.h +src/modes/xf86DiDGA.c +src/modes/xf86Rotate.c +src/modes/xf86Crtc.h + +* Copyright 2006 Eric Anholt +src/i2c_vid.h + +* Copyright 2007 Keith Packard +src/modes/xf86Cursors.c + +==== + +src/parser/xf86Parser.h and src/parser/xf86Optrec.h are covered by a license +similar to the MIT/X11 license, but with an additional advertising clause: + +* Copyright (c) 1997 Metro Link Incorporated +* Copyright (c) 1997-2003 by The XFree86 Project, Inc. +* Copyright (c) 1997-2001 by The XFree86 Project, Inc. + +- + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF + * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Except as contained in this notice, the name of the Metro Link shall not be + * used in advertising or otherwise to promote the sale, use or other dealings + * in this Software without prior written authorization from Metro Link. +- + +==== + +src/modes/xf86Modes.c is covered by a license similar to the MIT/X11 license, +but with an additional advertising clause: + +- + * Copyright (c) 1997-2003 by The XFree86 Project, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of the copyright holder(s) + * and author(s) shall not be used in advertising or otherwise to promote + * the sale, use or other dealings in this Software without prior written + * authorization from the copyright holder(s) and author(s). + */ +- + +==== + +All files generated by the buildsystem toolchain (e.g. autogen.sh) remain +under the copyright of their authors from the respective tools. + +==== + + +A couple of files are without explicit copyright: + +Some tiny Makefile.am: +src/xvmc/Makefile.am +src/ch7017/Makefile.am +src/tfp410/Makefile.am +src/ivch/Makefile.am +src/ch7xxx/Makefile.am + + +src/exa_wm_write.g4b +src/exa_sf.g4b +src/exa_wm_xy.g4b +src/packed_yuv_sf.g4b +src/exa_wm_src_sample_argb.g4b +src/exa_sf_mask.g4b +src/exa_wm_src_sample_a.g4b +src/exa_wm_src_affine.g4b +src/packed_yuv_wm.g4b +src/exa_wm_mask_sample_argb.g4b +src/exa_wm_ca.g4b +src/exa_wm_mask_affine.g4b +src/exa_wm_ca_srcalpha.g4b +src/exa_wm_nomask.g4a +src/exa_wm_mask_projective.g4b +src/exa_wm_noca.g4b +src/exa_wm_mask_sample_a.g4b +src/exa_wm_src_projective.g4b + + +src/tfp410/tfp410_module.c +src/ch7xxx/ch7xxx_module.c +src/ch7017/ch7017_module.c +xvmc/i915_program.h +xvmc/intel_batchbuffer.h +src/scripts/clock-graph.5c +src/scripts/clock.5c +src/scripts/fix.5c +src/scripts/tv.5c +src/sil164/sil164_module.c +src/legacy/i810_dri.h +src/legacy/i810_dri.c +src/i830_dri.h + +src/intel_driver.h +src/intel_options.[ch] +src/legacy/legacy.h +src/sna/brw/brw.h +src/sna/brw/brw_sf.c +src/sna/brw/brw_wm.c +src/sna/fb/sfb.h + +src/sna/gen4_source.h +src/sna/gen4_vertex.h +src/sna/gen6_render.h +src/sna/gen7_render.h +src/sna/kgem_debug.h +src/sna/rop.h +src/sna/sna_damage.h +src/sna/sna_module.h +src/sna/sna_reg.h +src/sna/sna_render.h +src/sna/sna_render_inline.h +src/sna/sna_trapezoids.h + +src/uxa/uxa_module.h + +xvmc/i965_reg.h --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/patches/series +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/patches/series @@ -0,0 +1 @@ +sna-sse2.diff --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/patches/sna-sse2.diff +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/patches/sna-sse2.diff @@ -0,0 +1,22 @@ +From 3d9f93d8bc5dfe2b79d4e16b8b5a6ce13b0792af Mon Sep 17 00:00:00 2001 +From: Julien Cristau +Date: Fri, 21 Jan 2022 13:50:12 +0100 +Subject: [PATCH xf86-video-intel] Fix SIGILL crash on non-SSE2 CPUs (closes: + #979276) + +diff --git a/src/sna/blt.c b/src/sna/blt.c +index afc719f6..803c5142 100644 +--- a/src/sna/blt.c ++++ b/src/sna/blt.c +@@ -631,7 +631,7 @@ memcpy_between_tiled_x__swizzle_0__sse2(const void *src, void *dst, int bpp, + } + } + +-#pragma GCC push_options ++#pragma GCC pop_options + #endif + + fast void +-- +2.30.2 + --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/rules +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/rules @@ -0,0 +1,65 @@ +#!/usr/bin/make -f + +SOURCE_NAME := $(shell dpkg-parsechangelog | awk -F': ' '/^Source: / {print $$2}') +SOURCE_VERSION := $(shell dpkg-parsechangelog | awk -F': ' '/^Version: / {print $$2}') +BUILDER := $(shell dpkg-parsechangelog | awk -F': ' '/^Maintainer: / {print $$2}') + +DEB_HOST_ARCH_OS ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_OS) + +ifeq ($(DEB_HOST_ARCH_OS), linux) +valgrind = --enable-valgrind +else +valgrind = --disable-valgrind +endif + +# Enable SNA, pass builderstring: +override_dh_auto_configure: + dh_auto_configure -- \ + --enable-sna \ + --enable-uxa \ + --libdir=/usr/lib \ + --libexecdir=/usr/lib/xserver-xorg-video-intel \ + --with-builderstring="$(SOURCE_NAME) $(SOURCE_VERSION) ($(BUILDER))" \ + $(valgrind) + +override_dh_auto_install: + dh_auto_install --destdir debian/tmp + +# Kill *.la files, libxvmc symlinks, and forget no-one: +override_dh_install: + find debian/tmp -name '*.la' -delete + rm -f debian/tmp/usr/lib/libI810XvMC.so + rm -f debian/tmp/usr/lib/libIntelXvMC.so + mkdir -p debian/tmp/usr/lib/$(DEB_HOST_MULTIARCH) + mv debian/tmp/usr/lib/libI810XvMC.so.* debian/tmp/usr/lib/libIntelXvMC.so.* \ + debian/tmp/usr/lib/$(DEB_HOST_MULTIARCH)/. + dh_install + +override_dh_missing: + dh_missing --fail-missing + +# Debug package: +override_dh_strip: + dh_strip --dbgsym-migration="xserver-xorg-video-intel-dbg (<< 2:2.99.917+git20180925-1~)" + +# That's a plugin, use appropriate warning level: +override_dh_shlibdeps: + dh_shlibdeps -- --warnings=6 + +override_dh_installchangelogs: + dh_installchangelogs debian/upstream.changelog + +%: + dh $@ --with quilt,xsf --builddirectory=build/ + +# Snapshots should only target experimental: +generate-snapshot: UPSTREAM_VERSION = $(shell echo $(SOURCE_VERSION) | sed 's/^[0-9]*://;s/-.*$$//') +generate-snapshot: UPSTREAM_BRANCH ?= upstream-unstable +generate-snapshot: ORIG = ../$(SOURCE_NAME)_$(UPSTREAM_VERSION).orig.tar.gz +generate-snapshot: + if [ -f $(ORIG) ]; then \ + echo "$(ORIG) already exists, stopping"; exit 1; \ + fi + git archive --format=tar --prefix=$(SOURCE_NAME)-$(UPSTREAM_VERSION)/ $(UPSTREAM_BRANCH) \ + | gzip -9 > $(ORIG) + pristine-tar commit $(ORIG) $(UPSTREAM_BRANCH) --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/source/format +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/source/format @@ -0,0 +1 @@ +1.0 --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/upstream.changelog +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/upstream.changelog @@ -0,0 +1,87267 @@ +commit baec802b21387d04aebb10ac29e719a1800c5aa0 +Author: Chris Wilson +Date: Sun Dec 21 14:41:12 2014 +0000 + + 2.99.917 snapshot + +commit 01ce7efe73538047abd38bbbb95fc4012ebeb9b4 +Author: Chris Wilson +Date: Sat Dec 20 13:36:50 2014 +0000 + + sna: Fix Drawable offsets prior to performing shadow discard + + Signed-off-by: Chris Wilson + +commit c27e6306e86797553351a71e2917a9b1158ec388 +Author: Chris Wilson +Date: Sat Dec 20 12:46:52 2014 +0000 + + sna/dri2: Check for implicit flushing after updating a Pixmap buffer + + Signed-off-by: Chris Wilson + +commit 5c16a4ec9b59123336483238ee6017db5491e255 +Author: Chris Wilson +Date: Sat Dec 20 09:38:41 2014 +0000 + + sna: Skip allocation of new TearFree buffer if not actually flipping + + After showing the new front buffer, we have to avoid writing to the back + buffer whilst the flip is still pending (as it may still be being shown + by the display). To do this we check if there are any outstanding flips, + and reallocate if so. However, with a CRTC override, we may just be + flipping that one CRTC and not the current TearFree back buffer and in + that case we can avoid the reallocation. + + Signed-off-by: Chris Wilson + +commit 9b3b591476cc52cc285a8a1f02462db37d5e10c2 +Author: Chris Wilson +Date: Fri Dec 19 12:25:30 2014 +0000 + + sna/dri2: Preserve the shadow CRTCs when copying to other areas + + In the Composite setup, if we are doing a DRI2 copy onto the front + buffer, we are fully cognizant that the copy will not go onto the + unredirected Windows of another Client. So we can preserve the shadow + CRTC mapping for those Clients, and prevent ping-ponging between CRTC + modes. + + Signed-off-by: Chris Wilson + +commit 391b50c81decd208c47c109217b2c882c064ac69 +Author: Chris Wilson +Date: Fri Dec 19 11:11:38 2014 +0000 + + sna/dri2: Report changes in pitch when swapping bo + + As we have relaxed the pitch restriction between front/back buffers when + swapping, we need to make sure that any change is also reported back + along with the change in front/back names. + + Signed-off-by: Chris Wilson + +commit ada97d27250aa09b1a27d5f6640fea011fade997 +Author: Chris Wilson +Date: Fri Dec 19 09:43:33 2014 +0000 + + sna/dri2: Look for preferred CRTC for visible portion of the window + + Signed-off-by: Chris Wilson + +commit 6f99bbe67e6e70d5b24611c7afa0dffc5632aaab +Author: Chris Wilson +Date: Fri Dec 19 08:37:07 2014 +0000 + + sna/dri2: Prevent NULL pointer dereference of Window private + + In case we receive quick successive calls to DRI2GetBuffers on the same + Window, we need to check that the private exists before dereferencing + it. + + Signed-off-by: Chris Wilson + +commit fdd7508e53043f82f9cf422fc968c6574334a667 +Author: Chris Wilson +Date: Fri Dec 19 07:59:24 2014 +0000 + + sna/dri2: Decouple Window cache on Pixmap changes + + If the Pixmap for a Window is changed (i.e. Composite + redirection/unredirection), we also need to decouple any associated DRI2 + front buffer for the Pixmap (e.g. used for single CRTC flipping). + + Signed-off-by: Chris Wilson + +commit 82e480267079f8678245e37724f95ae87f55b582 +Author: Chris Wilson +Date: Wed Dec 17 08:01:00 2014 +0000 + + intel-virtual-output: Do not attempt to tidy up the local display if it fails + + Just fix the segfault dereferencing the primary display if we bail + during its setup. + + Signed-off-by: Chris Wilson + +commit c211b3bc61efa7d13a5f5f1276649d90bf4ef854 +Author: Chris Wilson +Date: Wed Dec 17 07:51:31 2014 +0000 + + intel-virtual-output: Add version number to verbose output + + Signed-off-by: Chris Wilson + +commit 123754de41380b94922768d021987b1dea3b39c4 +Author: Chris Wilson +Date: Tue Dec 16 10:31:22 2014 +0000 + + sna: Make error debug tracing available at normal debug levels + + Signed-off-by: Chris Wilson + +commit 99537089346ed7a1bc6b02349fad93845e865bb9 +Author: Chris Wilson +Date: Fri Dec 12 15:36:25 2014 +0000 + + sna: Tune handling of kernel error detection during intial setup + + Signed-off-by: Chris Wilson + +commit 01692b8cf229f45813cf3a1059577a779d71dfa8 +Author: Chris Wilson +Date: Fri Dec 12 15:13:04 2014 +0000 + + sna: Fix TearFree multi-monitor operation whilst wedged + + The crtc flip (for when the kernel can't do a pageflip) made the mistake + of setting the shadow buffer to the scanout - nullifying the effect of + the TearFree. + + Signed-off-by: Chris Wilson + +commit 343299c78bfc1044da0b965e99de9ad312b05cca +Author: Chris Wilson +Date: Fri Dec 12 09:40:51 2014 +0000 + + sna/trapezoids: Check the pixmap is wrapped before deferencing it + + When we AddTraps to a low resolution bitmap, we need to fallback as we + don't wrap it with a GPU pixmap. + + Signed-off-by: Chris Wilson + +commit 60ebac591596ccb768b684b1909064570dd1cf47 +Author: Chris Wilson +Date: Fri Dec 12 07:55:51 2014 +0000 + + sna: Add another Xinerama vs RandR guard + + Another place used rrScrPriv without checking for its validity. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87257 + Signed-off-by: Chris Wilson + +commit f587d71f3c91f9ddcc4cdbe8a0f9ce59590d9db2 +Author: Chris Wilson +Date: Thu Dec 11 08:53:54 2014 +0000 + + sna: Catch NULL RandR screen private + + If Xinerama is enabled, than RandR12 will be silently disabled. Be + careful not to dereference the rrScrPiv when it doesn't exist. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87207 + Signed-off-by: Chris Wilson + +commit 04a09d353fc5ad8a55eb2457dc8bb43638ba879e +Author: Chris Wilson +Date: Tue Dec 9 20:43:52 2014 +0000 + + uxa/dri: Remove defunct intel->back_pixmap + + This was only required for glamor support. + + Signed-off-by: Chris Wilson + +commit 08ee9a75df16ee276835df5fc613648db2566154 +Author: Chris Wilson +Date: Tue Dec 9 20:40:20 2014 +0000 + + uxa/dri: Fix triple buffer swapping + + Fixes regression from + + commit 0aa2edbd29c8dd26a5f3748e3875c445ea358a6d + Author: Chris Wilson + Date: Wed Nov 5 11:56:20 2014 +0000 + + Remove defunct glamor support + + where the wrong branch of pixmap exchange upon SwapBuffers was kept when + removing the glamor paths. + + Reported-by: Rui Matos + Signed-off-by: Chris Wilson + +commit fc984e8953d61901b255422c8f56eb79a2dd2a28 +Author: Chris Wilson +Date: Tue Jul 22 08:38:42 2014 +0100 + + sna/dri3: Mesa relies upon implicit fences for X/Compositor synchronisation + + The decision has been made that DRI3/intel shall continue with DRI2-style + implicit fencing for synchronisation between X and clients using pixmaps + as texture sources. (The other way around uses explicit fencing!) + + References: https://bugs.freedesktop.org/show_bug.cgi?id=81551 + Signed-off-by: Chris Wilson + +commit d247cb7d0cdb73736f31612157e47f166af68ba0 +Author: Chris Wilson +Date: Mon Dec 8 10:07:25 2014 +0000 + + sna/gen6: Poke PSMI control around WAIT_FOR_EVENT to prevent idling + + The bspec recommends preventing the hardware from going to sleep around + a WAIT_FOR_EVENT, and tells us to use disable sleep bit in PSMI control + to accomplish this. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=62373 + Signed-off-by: Chris Wilson + +commit d39dc73a80161d290555877942e5990daf0c0411 +Author: Chris Wilson +Date: Mon Dec 8 08:33:11 2014 +0000 + + sna: Inline check for pending events before reading from drm fd + + Signed-off-by: Chris Wilson + +commit f8aecdffada438306dff8923cdfc0df527509672 +Author: Chris Wilson +Date: Thu Dec 4 11:23:11 2014 +0000 + + sna: Clear the read flags for the shared drm fd after use + + In ZaphodHeads, we may reuse the same select read flags and attempt to + read from a blocking drm fd multiple times. However, if we clear the + read flags after first exhausting the fd, we shouldn't then block on + subsequent heads. + + Signed-off-by: Chris Wilson + +commit 594470c809627feab4891bade5ec6d80e1d0a919 +Author: Chris Wilson +Date: Thu Dec 4 11:16:58 2014 +0000 + + sna: Update the fence marker after submitting a new batch + + Signed-off-by: Chris Wilson + +commit 9c2c485df9fd39ae36779f765a892e36835a8001 +Author: Chris Wilson +Date: Mon Dec 1 14:26:46 2014 +0000 + + sna: Validate that the reg/insn size is well defined + + Signed-off-by: Chris Wilson + +commit 263d10998617ba935179942d2440a1607cd3c21c +Author: Chris Wilson +Date: Mon Dec 1 13:26:46 2014 +0000 + + sna: Clamp downsampling tile size + + For very large scale factors, it is possible for the current calculation + to underflow and try negative tile sizes. + + Signed-off-by: Chris Wilson + +commit 88e9bb760fbd1249bb364a6b68aceee0b442738c +Author: Chris Wilson +Date: Mon Dec 1 10:47:32 2014 +0000 + + sna: Explicitly disable unused pipes after an output reconfiguration + + Signed-off-by: Chris Wilson + +commit ddf5feba786cf0147c4db9720c96e9a5636573b0 +Author: Chris Wilson +Date: Mon Dec 1 10:00:32 2014 +0000 + + sna: Generate a backtrace on assertion failures + + Signed-off-by: Chris Wilson + +commit e12ec452a99396f76138a5961c8195e22ca12ac1 +Author: Chris Wilson +Date: Mon Dec 1 09:46:20 2014 +0000 + + sna: Cancel pending mode change notification + + Along a couple of paths, we either do not care about the notification + (i.e. during suspend) or do it explicitly. There we should mark the work + as done. + + Signed-off-by: Chris Wilson + +commit 700c036d180a09e4f7ec30466f7f6dda1c1d0066 +Author: Chris Wilson +Date: Mon Dec 1 09:31:41 2014 +0000 + + sna: Reject modesets with 0 outputs + + Signed-off-by: Chris Wilson + +commit dd421005cac981e75f734d50263675521943ed7b +Author: Chris Wilson +Date: Mon Dec 1 09:29:07 2014 +0000 + + sna: Add a few more asserts to sna_crtc_flip() + + Check that we are updating an active CRTC with a valid mode and + associated outputs. + + Signed-off-by: Chris Wilson + +commit 104517507f267aca7433f8b85dec89e9013a640e +Author: Chris Wilson +Date: Mon Dec 1 09:24:50 2014 +0000 + + sna: Do not post shadow updates in the middle of output reconfiguration + + Wait until the screens and framebuffers settle before we start updating. + + Signed-off-by: Chris Wilson + +commit faef6e5e1ab52819d4e9a19738ec7d8419841613 +Author: Chris Wilson +Date: Mon Dec 1 08:29:47 2014 +0000 + + sna: Clean up DBG compile warnings + + Including a potential crash due to using a unspecified string, oops. + + Signed-off-by: Chris Wilson + +commit 0bec625cc45eb8de85a5013506cce5f789dc8e45 +Author: Chris Wilson +Date: Mon Dec 1 08:11:18 2014 +0000 + + sna: Report when we disable TearFree due to an error in operation + + Signed-off-by: Chris Wilson + +commit 6059b51b59537682b3d9c64c69ea72616462c41c +Author: Chris Wilson +Date: Fri Nov 28 07:33:42 2014 +0000 + + sna: Reject attempts to set an invalid mode + + Let's be sure the mode has been established before we attempt to apply + it to a CRTC - just in case the kernel tries to use the invalid mode and + blows up. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=86679 + Signed-off-by: Chris Wilson + +commit 0f15b8b45bb6de10ce1926db303247a5bd3c1c08 +Author: Chris Wilson +Date: Wed Nov 19 18:42:32 2014 +0000 + + sna/transform: Correctly check for imprecise fractional translations + + Signed-off-by: Chris Wilson + +commit 7725c423cda217e0dbd95003bb7a80b4b3a73bb4 +Author: Chris Wilson +Date: Wed Nov 19 18:30:20 2014 +0000 + + sna/dri2: Improve precision of completion event for no-op swaps + + Signed-off-by: Chris Wilson + +commit f367f3dee5e2ecba265a8ff7e98e196189793613 +Author: Chris Wilson +Date: Wed Nov 19 18:19:13 2014 +0000 + + sna/dri2: Add more DBG to explain invalid frames + + Signed-off-by: Chris Wilson + +commit 05a1aba1ab5d288918d6689080170fc83a80db61 +Author: Chris Wilson +Date: Wed Nov 19 18:12:10 2014 +0000 + + sna: DBG compile fix + + Signed-off-by: Chris Wilson + +commit a90cc3b3889fafbd91c11c42d068a9d6474e218b +Author: Chris Wilson +Date: Tue Nov 18 08:37:25 2014 +0000 + + sna: Tweak alignment constraints on gen8 to allow BLT + + The previous commits prevent us from using the BLT if the destination + address is misaligned. Honour that restriction when creating buffers as + well, so that they are always usuable by the BLT. + + Signed-off-by: Chris Wilson + +commit 8dee52997891108eec8e4df12dd02f3a060d9cb8 +Author: Chris Wilson +Date: Wed Nov 19 13:38:20 2014 +0000 + + sna: Add more checks and asserts for BLT capable bo + + Before we use the BLT for core acceleration, double check that we can. + This should catch the case where we attempt to operate on SHM pixmaps + which do not meet the restrictions. + + Signed-off-by: Chris Wilson + +commit 3a22b6f6d55a5b1e0a1c0a3d597996268ed439ad +Author: Mika Kuoppala +Date: Wed Nov 19 15:10:05 2014 +0200 + + sna: gen8 BLT broken when address has bit 4 set + + With bit 4 set in address, the gen8 blitter fails and blits errorneously + into the cacheline preceeding the destination and similarly when reading from + the source, corrupting memory. + + v2: Update the destination base offset pattern as revealed + by igt/tests/gem_userptr_blits/destination-bo-align + + v3: Check base address as well + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79053 + Cc: Chris Wilson + Tested-by: xunx.fang@intel.com [v2] + Signed-off-by: Mika Kuoppala + +commit 29aab766f4b59c71181875880c8c943b93008bdf +Author: Chris Wilson +Date: Tue Nov 18 20:54:39 2014 +0000 + + sna/dri2: Remove unused function + + Signed-off-by: Chris Wilson + +commit b6eeb7a1f7efa591504070b606be655e27e6e9c2 +Author: Chris Wilson +Date: Wed Nov 5 13:03:41 2014 +0000 + + Disable DRI3 by default + + The external libraries, both in git, and especially shipping already + enabled in distributions, are buggy and lead to server crashes and + lockups. Caveat emptor. + + Signed-off-by: Chris Wilson + +commit 6c2707d7bbc0ebb422be66618b6f78887c46446e +Author: Chris Wilson +Date: Thu Nov 13 08:37:13 2014 +0000 + + sna: Unroll pwrite using our cached mmappings + + Signed-off-by: Chris Wilson + +commit f9f85b88032b2458d4d24ceca450fdaa65e6b94d +Author: Chris Wilson +Date: Wed Nov 12 11:50:33 2014 +0000 + + sna: Reorder PARAMs based on upstream inclusion + + Signed-off-by: Chris Wilson + +commit 13fa1f1a26aed83cd8fccafb9a0bdb096f69534b +Author: Chris Wilson +Date: Wed Nov 12 10:54:36 2014 +0000 + + sna/gen7: Be paranoid and force a pipecontrol stall at least every 4 flushes + + The documentation warns of potential GPU hangs if we emit more than 4 + pipecontrol flushes without a CS stall. This is highly unlikely given + how frequently we must inject stalls into the pipeline, but force a + stall just in case! + + Signed-off-by: Chris Wilson + +commit b2492fa45beaf3c676eea2d5d75e35d60b91d769 +Author: Chris Wilson +Date: Mon Nov 10 13:30:15 2014 +0000 + + sna: Only reshow unhidden cursors after modesetting + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit 0267f5902ddaceced870dcd8451ef8729e33e5c2 +Author: Chris Wilson +Date: Mon Nov 10 07:42:42 2014 +0000 + + sna: Check after filtering points before submitting boxes to be drawn + + As we clip the points when converting them into GPU boxes, check that we + have something to draw before submitting the commands. + + Reported-by: Ian Gay + References: https://bugs.freedesktop.org/show_bug.cgi?id=86075 + Signed-off-by: Chris Wilson + +commit 9ea242c275a70351abcfbc0f8f3233c122abecbe +Author: Chris Wilson +Date: Sun Nov 9 08:59:08 2014 +0000 + + sna: Check picture format on destination before beginning a GPU operation + + This is more important in the multiple stage operations like glyph + rendering where we do not want to initiate an operation on the GPU only + then to fallback due to an incompatible destination. + + Signed-off-by: Chris Wilson + +commit e96520327bd2ef4fbc7b7b5169a17b966d9f85f3 +Author: Sedat Dilek +Date: Fri Nov 7 10:54:18 2014 +0100 + + sna: wc-mmap: Fix warning in configure + + This fixes the following warning due to a typo: + + configure: WARNING: unrecognized options: --enable-wc-map + Signed-off-by: Sedat Dilek + +commit ab6680375cc6d5efebe8e40816d1906b15678d6e +Author: Chris Wilson +Date: Fri Nov 7 09:54:35 2014 +0000 + + sna/xv: Give the illusion of hardware progress + + The number of ports we provide for Xv textured video is arbitrary. The + main cost is reservation of a number of XIDs and preallocation of a + block of memory. Whatever value we pick, someone will always want + more... + + References: https://bugs.freedesktop.org/show_bug.cgi?id=85974 + Signed-off-by: Chris Wilson + +commit 0aa2edbd29c8dd26a5f3748e3875c445ea358a6d +Author: Chris Wilson +Date: Wed Nov 5 11:56:20 2014 +0000 + + Remove defunct glamor support + + It never was a stable or complete replacement, and now it is + incorporated in Xorg itself! + + Signed-off-by: Chris Wilson + +commit 4281bbdd5be1f846c217cdf6d09536779cd324ce +Author: Chris Wilson +Date: Fri Oct 24 08:50:55 2014 +0100 + + sna: Fix debug mmapping of active + released aux buffers + + The debug code wants to print the batch and the aux buffers. To do so, + it needs to bypass the assertions on the lifetime of the buffers. + + Signed-off-by: Chris Wilson + +commit 87802b3402ec4a829c6507b4b78fcd03e30b6fe1 +Author: Chris Wilson +Date: Thu Oct 23 10:34:44 2014 +0100 + + sna: Experimental support for write-combining mmaps + + If we have a linear buffer, we can request the kernel mmap it directly + with write-combining without having to pin it into the GTT. This allows + us to efficiently upload very large buffers, and can avoid the dreaded + aperture thrashing. + + Signed-off-by: Chris Wilson + +commit 33764685cbcd01548b6a23c217c7b511c1639694 +Author: Chris Wilson +Date: Thu Nov 6 12:40:20 2014 +0000 + + sna: Wrap prefaulting with sigtrap() + + Handle a potential SIGBUS due to kernel bugs when prefaulting the + scanout surface. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=85959 + Signed-off-by: Chris Wilson + +commit 97fe3c1c860978c7a649cba93a55fa497010ccc1 +Author: Rodrigo Vivi +Date: Wed Nov 5 15:48:14 2014 -0800 + + sna: Use VMask in 3DSTATE_PS + + Using dispatch mask cause hangs waiting PS Done on some cases like bug #83207, + with larger screen or when scaling it. + + Also mesa uses VMask instead of Dmask for 3DSTATE_PS because in some cases + they were getting incorrect derivatives for subspans. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83207 + Cc: Timo Aaltonen + Cc: Gary Wang + Signed-off-by: Rodrigo Vivi + Tested-by: Timo Aaltonen + +commit 0532a3313ad9c76a6e1d28e8a1c2ea495583fead +Author: Chris Wilson +Date: Wed Nov 5 20:11:54 2014 +0000 + + sna/gen8: Clear instancing enabled bit between batches + + gen8 sets the instancing bit relative to the vertex element, but we were + clearing it for the vertex buffer. As the maximum number of vertex + elements is fixed, just clear them all when emitting our header. Note + that VF_SGVS is not sufficient by itself to disable all side-effects of + instancing. + + Thanks to Kenneth Graunke for pointing out the change from vertex buffer + to vertex element of the instancing enable bit. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84958 + Signed-off-by: Chris Wilson + +commit ba408bf21c4b65f19c7b581e4c88c92805184334 +Author: Chris Wilson +Date: Tue Nov 4 13:39:52 2014 +0000 + + sna: Correct units for videoRam + + The mappable aperture size is stored as a page count, videoRam expects + size in KiB. + + Signed-off-by: Chris Wilson + +commit 7ed5b1156cbf173a68f4fe007c51b911e7c5a1a2 +Author: Chris Wilson +Date: Tue Nov 4 12:54:00 2014 +0000 + + sna: Reuse the queried aperture size for videoRam determination + + Rather than repeat our derivation of how much RAM we can map, just reuse + the already determined value. + + Signed-off-by: Chris Wilson + +commit a972c9886edc1141ad3f8a0a33d2f7f18d0008bc +Author: Chris Wilson +Date: Fri Oct 24 12:16:11 2014 +0100 + + sna: Use v2 of get_tiling ioctl to check for bit17 swizzling + + With the new version of the get_tiling ioctl we can reliably detect if + we can use manual detiling (i.e. CPU mmaps) on older gen. + + Signed-off-by: Chris Wilson + +commit 7ecc778691c452285f754743a93a46fa1d3da52f +Author: Chris Wilson +Date: Tue Nov 4 10:36:26 2014 +0000 + + backlight: bl_power uses 0 for on and 4 for off + + The backlight/bl_power file didn't obey the obvious semantics, but + instead operates using some interesting framebuffer API. Oh well. + + Signed-off-by: Chris Wilson + +commit cc3b8a542ecb1ba873efefaeab630fa8f69b5b96 +Author: Chris Wilson +Date: Fri Oct 31 20:38:40 2014 +0000 + + sna: Treat external bo carefully when marking as idle + + When we flag a bo as being externally modified, we set a special flag on + its request pointer. This forces us to inspect whether the bo is busy + before accessing it the next, and if it is idle, we must be careful that + we then do not dereference the special request. + + Fixes regression from + commit 9115406b651eb11779f37c4b048d55188b9d6e02 + Author: Chris Wilson + Date: Thu Oct 30 19:21:02 2014 +0000 + + sna: Retire all requests when a bo is found to be not busy + + Signed-off-by: Chris Wilson + +commit 122f6065604480a57b86f04d5d09011ee6e8829b +Author: Chris Wilson +Date: Fri Oct 31 16:50:04 2014 +0000 + + sna: Fix forced fallbacks from init + + As we now override a few hooks when we mark the GPU as wedged, we also + need to preserve those overrides during initialisation. Fixes DBG_NO_HW. + + Signed-off-by: Chris Wilson + +commit d959014c10e2408ed2f073bd5fcb8c558a17da07 +Author: Chris Wilson +Date: Fri Oct 31 16:12:37 2014 +0000 + + sna: Modicum of extra DBG for transformed redisplay + + Signed-off-by: Chris Wilson + +commit 1040d92e31eea4556c2605c809d18ec4c864424a +Author: Chris Wilson +Date: Fri Oct 31 16:11:54 2014 +0000 + + sna/gen6+: Fix projective sample coordinates + + Reported-by: "Ding, Chi" + Signed-off-by: Chris Wilson + +commit 30fded8dfa77c74de165ad53f82412a2e7fa88ae +Author: Chris Wilson +Date: Fri Oct 31 16:11:28 2014 +0000 + + sna/brw: Fix EU tests to select the right gen + + Signed-off-by: Chris Wilson + +commit 71d79daf458c05f771441eb268693c34be0a97c3 +Author: Chris Wilson +Date: Thu Oct 30 19:20:13 2014 +0000 + + sna: Remove extraneous tab whitespace before parameter name + + Reported-by: Arthur Koziol + Signed-off-by: Chris Wilson + +commit 9115406b651eb11779f37c4b048d55188b9d6e02 +Author: Chris Wilson +Date: Thu Oct 30 19:21:02 2014 +0000 + + sna: Retire all requests when a bo is found to be not busy + + Signed-off-by: Chris Wilson + +commit 9d48d2817927bc2532953f09b6be2002c2086e1f +Author: Chris Wilson +Date: Fri Oct 24 09:12:49 2014 +0100 + + sna: Reuse the same fence until retired + + In order to reduce the number of breadcrumbs the kernel must emit to + track our batches, reuse the last query until it has retired. + + Signed-off-by: Chris Wilson + +commit 61436c2fabe117b85404eecb06158ba0a63a7741 +Author: Chris Wilson +Date: Wed Oct 29 16:52:44 2014 +0000 + + sna: Fix build for GC API changes in Xorg-1.16.99.901 + + The GC struct was changed in + + commit 73e2383b7350723256894c5076d0c731aec5cd1f + Author: Adam Jackson + Date: Fri Jun 20 13:31:20 2014 -0400 + + dix: Always store GC client clip as a region (v2) + + update to match. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85581 + Signed-off-by: Chris Wilson + +commit d08a5f555a0c47ae23c0f9a890b512cb23e74feb +Author: Chris Wilson +Date: Fri Oct 24 09:53:29 2014 +0100 + + sna/trapezoids: Prevent overflow of edge gradient in mono rasteriser + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c76 + Signed-off-by: Chris Wilson + +commit f611f9580469661e585f419a7dd033ddffd7e20d +Author: Chris Wilson +Date: Fri Oct 24 09:41:47 2014 +0100 + + sna/trapezoids: Difference between two 32-bit quantities is 33-bits in size + + When computing the edge distance, we subtract on 32-bit quantity from + another. This requires 33-bits to store the full result so promote the + subtraction to 64-bits (rather than the result of that subtraction as + done currently). + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c76 + Signed-off-by: Chris Wilson + +commit 4df0052a21efd744c4b8cb2409139ded6e45f5c8 +Author: Chris Wilson +Date: Fri Oct 24 08:08:23 2014 +0100 + + sna: Update the reloc->delta for the shrunk batch + + As well as actually updating the value in the batch for the relocation + address, we need to tell the kernel in case it has to update the + address. + + Another regression from + commit b4872f74c05a92c91d7b57146eb35ed2ecc86d97 + Author: Chris Wilson + Date: Tue Oct 21 10:38:22 2014 +0100 + + sna: Avoid pwriting large batches + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85389 + Signed-off-by: Chris Wilson + +commit 8df8618c62c0918416ca3e21b081299eacb9b054 +Author: Chris Wilson +Date: Fri Oct 24 08:02:50 2014 +0100 + + sna: Adapt to changes in internal render API in Xorg-1.17 + + Signed-off-by: Chris Wilson + +commit a8d1eaf6ee1fed0aeff681d33864e17cb904ddd3 +Author: Chris Wilson +Date: Wed Oct 22 21:12:56 2014 +0100 + + sna: Fix use of uninitialized value when handling migration for PRIME + + sna_accel.c: In function 'sna_pixmap_undo_cow': + sna_accel.c:1933:11: warning: 'create' may be used uninitialized in this function [-Wuninitialized] + + Signed-off-by: Chris Wilson + +commit e46f26b9e2671468e9accd2f69ffc22fb96b5849 +Author: Chris Wilson +Date: Wed Oct 22 19:37:42 2014 +0100 + + sna/gen8: Load the sampler result directly into the fb write message + + With the unified register file (from gen6+), we no longer need to copy + the sample results into the final write message. + + Signed-off-by: Chris Wilson + +commit dee9ea29917dd5ef4a7de6570cd091f08d334df9 +Author: Chris Wilson +Date: Wed Oct 22 19:40:14 2014 +0100 + + sna/gen8: Override the URB output from the VS + + Using the override seems to be marginally faster. + + Signed-off-by: Chris Wilson + +commit 7a9bdadd71730adc5266bc6758982abec5917b93 +Author: Chris Wilson +Date: Wed Oct 22 19:31:10 2014 +0100 + + sna/gen8: Clamp URB allocations for GT3 + + GT3 requires some reserved space in the URB allocation and so we must + reduce the amount we allocate to our vertices. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81583 + Signed-off-by: Chris Wilson + +commit de54a93217cc550c44ee138f0511ede6925d84e0 +Author: Chris Wilson +Date: Wed Oct 22 19:30:21 2014 +0100 + + sna/gen8: Annotate more 64bit pointer locations + + Signed-off-by: Chris Wilson + +commit 2114b54a0b8a561dd7db1a38a87654571b4aa853 +Author: Chris Wilson +Date: Wed Oct 22 18:51:39 2014 +0100 + + sna: Fix double application of batch shrinking to relocation targets + + Fixes regression from + + commit b4872f74c05a92c91d7b57146eb35ed2ecc86d97 + Author: Chris Wilson + Date: Tue Oct 21 10:38:22 2014 +0100 + + sna: Avoid pwriting large batches + + NB: Remember to check your tree before pushing a simple bug fix. + + Signed-off-by: root + +commit 6e486e11a53f93b628a3a82d5b086e63b7dc6c1e +Author: Chris Wilson +Date: Wed Oct 22 07:24:10 2014 +0100 + + sna/dri2: Fix interoperation with PRIME and older Xorg + + When using the fake triple buffer implementation with recent enough Xorg + to support both real triple buffering and PRIME, we have to disable use + of SwapLimit as that freezes the client when we are instead faking the + triple buffer. (We have to use the fake support on those Xservers to + workaround crashes inside the Xserver.) + + Reported-by: Paulo Dias + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85144#c12 + Signed-off-by: Chris Wilson + +commit de96fbf66cf9a0df85cfd1dad8cf786a1d6f8325 +Author: Chris Wilson +Date: Tue Oct 21 12:20:29 2014 +0100 + + sna/trapezoids: Prefer GPU for AddTraps() + + Signed-off-by: Chris Wilson + +commit b4872f74c05a92c91d7b57146eb35ed2ecc86d97 +Author: Chris Wilson +Date: Tue Oct 21 10:38:22 2014 +0100 + + sna: Avoid pwriting large batches + + Signed-off-by: Chris Wilson + +commit 83a3d9147308f4777324abdea859ac0c108f03c6 +Author: Chris Wilson +Date: Sun Oct 19 09:11:33 2014 +0100 + + sna: Prefer the GPU for wide lines and arcs + + Signed-off-by: Chris Wilson + +commit 316155db98aac4d5d0a7077e86453e4d41a3029d +Author: Chris Wilson +Date: Sat Oct 18 10:58:03 2014 +0100 + + sna/gen6: Apply gen7 flushing + + Clemens Eisserer noticed that glyphs would randomly disapper whilst + being rendered on his Sandybridge, a sign that the GPU is not flushing + its internal state on pipeline changes. As a precaution, adopt the + Ivybridge flush semantics (whilst preserving the required Sandybridge + workarounds). + + Reported-and-tested-by: Clemens Eisserer + Reported-and-tested-by: Ilia Mirkin + References: https://bugs.freedesktop.org/show_bug.cgi?id=85158 + Signed-off-by: Chris Wilson + +commit bf7b5a24bbfc8a3553be6baa457ec92559dd3d65 +Author: Chris Wilson +Date: Sat Oct 18 10:13:31 2014 +0100 + + sna/dri2: Exchange pitches as well + + When swapping over the names, we also need to swap the pitches exposed + through the protocol as well. + + Signed-off-by: Chris Wilson + +commit 6b98f16241c2a4788f3b5fe4c0d956a849d2ac05 +Author: Chris Wilson +Date: Thu Oct 16 08:26:03 2014 +0100 + + sna: Allow TearFree updates to continue even when the GPU is wedged + + Even if we cannot render using the GPU, we should still be able to + request that the outputs be flipped. So try, and only if that fails, + resort to writing directly into the scanout. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=85058 + Signed-off-by: Chris Wilson + +commit c896f249c7b64683839665ff528920382f4fc58e +Author: Chris Wilson +Date: Thu Oct 16 08:17:09 2014 +0100 + + sna: Fixup a failed per-CRTC TearFree flip + + If we fail to flip onto a new per-CRTC bo, first try a normal modeset. + This catches instances where the pitch changes for example. + + Signed-off-by: Chris Wilson + +commit 3812dfce175eeaef7f41632d2df6a0d88c0ae19b +Author: Chris Wilson +Date: Thu Oct 16 07:46:26 2014 +0100 + + sna: Replace GPU render operations with CPU callbacks after wedged + + If we find the GPU is wedged, replace some of the lowlevel render + operations with CPU equivalents to simplify some fallbacks that still + need to operate on GPU bo (such as copying DRI buffers). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=85058 + Signed-off-by: Chris Wilson + +commit 9a5ca59d2b7b209e6f56dd3f94d4ae6f06e1ecdc +Author: Chris Wilson +Date: Wed Oct 15 16:51:42 2014 +0100 + + sna: Prevent recursion during last-gasp disabling of outputs + + If we fail an execbuffer, we disable outputs and try again. (In case we + have severe fragmentation issues and need to rearrange the scanouts in + GTT.) Afterwards we re-enable the outputs, but this causes us to flush + the pending rendering and so recurse into the execbuffer. Prevent this + with a slight hack during enabling of outputs. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=85058 + Signed-off-by: Chris Wilson + +commit 49cf2803d3bc3be12f6a59581631fdf5547bb0e3 +Author: Rodrigo Vivi +Date: Mon Oct 13 11:33:27 2014 -0700 + + sna: a bit of cleanup on gen8_render.h + + Removing bits that become reserved on bdw and organizing 3DSTATE_PS header. + + Signed-off-by: Rodrigo Vivi + +commit f5935aa4bb4fbd5cc16bd7a861e12becb3c1bcd2 +Author: Rodrigo Vivi +Date: Mon Oct 13 11:33:26 2014 -0700 + + sna: Fix URB offset shift on 3DSTATE_SBE + + Unfortunatelly this doesn't the bug I was hunting, but let's follow + the spec. + + Signed-off-by: Rodrigo Vivi + +commit 2c227f391a1727f7bcfd0f03c2c75e01bf893383 +Author: Chris Wilson +Date: Mon Oct 13 09:26:12 2014 +0100 + + sna: Drain all udev events before checking output status + + As libudev only pulls off events one by one and we may need to process + several for a MST topology change, keep polling until complete. + + Signed-off-by: Chris Wilson + +commit 49376ba3bddd15e62df55928198160d9970dc1c6 +Author: Chris Wilson +Date: Sat Oct 11 21:34:40 2014 +0100 + + backlight: Open bl_power using WRONLY for writing. + + Jan spotted that we open the bl_power file using O_RDONLY and then attempt + to write the new power state into it. This fails... + + Reported-by: Jan Steffens + Signed-off-by: Chris Wilson + +commit 70a1710e18f874f9efd8e97f0f873d65bf1b46ca +Author: Chris Wilson +Date: Fri Oct 10 11:42:09 2014 +0100 + + sna/trapezoids: Sacrifice precision to avoid 64bit overflow + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c71 + Signed-off-by: Chris Wilson + +commit 069f7878dc57dca39ad79b2f3ad5248244090b70 +Author: Chris Wilson +Date: Fri Oct 10 11:31:45 2014 +0100 + + sna/trapezoids: Treat mono-edges within a single column as vertical + + Signed-off-by: Chris Wilson + +commit 0c1b4f913c20370736327c44a9fa3b5c55c05d52 +Author: Chris Wilson +Date: Fri Oct 10 08:35:16 2014 +0100 + + sna: Log if we disable the backlight after failure to switch it on + + Signed-off-by: Chris Wilson + +commit f7f7383de0da0776cfbe98481578ab6680732a2a +Author: Chris Wilson +Date: Thu Oct 9 16:35:36 2014 +0100 + + compat: Hide changes in miHandleExposures() interface + + Signed-off-by: Chris Wilson + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84901 + +commit c139e2fb95f2db0b39aadcd58cc63b316a278951 +Author: Chris Wilson +Date: Wed Oct 8 13:59:55 2014 +0100 + + intel: Store pointer to struct intel_device + + Beware the barbarians at the gate, who invade and steal your ScrnInfoPtr + and its Entity from underneath you. In some configurations, we lose + access to the struct intel_device stored on the Entity after + initialisation, causing havoc. Workaround this by storing the + intel_device that we open in our driverPrivate. + + Signed-off-by: Chris Wilson + +commit 57c48e4973ac0dad09744eaa82315a5f023094e7 +Author: Chris Wilson +Date: Tue Oct 7 21:08:52 2014 +0100 + + sna: Fix the TearFree flip handler for the change in argument order + + From the last commit c481254c17316e6c8299705fd0a218484dd369fe, + we need to pass along the private pointer as the flip data as we no + longer pass it down from the caller. + + Signed-off-by: Chris Wilson + +commit c481254c17316e6c8299705fd0a218484dd369fe +Author: Chris Wilson +Date: Tue Oct 7 16:24:18 2014 +0100 + + sna: Retrieve private pointer from vblank cookie + + When using ZaphodHeads, we share the /dev/dri/card0 fd between both + screens. So when we read an event back from the fd, it could be for + either head and we cannot assume that our private pointer is valid for + the data passed along with the event. Instead, we need to retreive that + pointer from the event. + + Fixes regression from + + commit 8369166349c92a20d9a2e7d0256e63f66fe2682b [2.99.912] + Author: Chris Wilson + Date: Wed Jun 4 08:29:51 2014 +0100 + + sna/dri2: Enable immediate buffer exchanges + + although the design bug is actually older. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84744#c15 + Signed-off-by: Chris Wilson + +commit 9ed1ac8b506509be410c12870397417c7638886e +Author: Chris Wilson +Date: Mon Oct 6 21:37:14 2014 +0100 + + sna: Wrap rrGetInfo so that we can probe when udev is not active + + If the ddx is configured without udev support, we do not receive + notifications when the MST topology is changed. This leads us to query + the kernel for bad connectors, and so we end up reporting an unknown + connection status for them, which the user and client often find + confusing. However, we can not simply act upon the detection failure as + we are too deep inside the callback chain and cannot change the arrays of + known connectors whilst iterating over them. A neat compromise is to + hook into the rrGetInfo call chain and poll for MST changes before we + report back the current configuration. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=84718 + Signed-off-by: Chris Wilson + +commit dff59000d43c5449b3ed79ff144236c17b507bd6 +Author: Chris Wilson +Date: Tue Oct 7 07:18:47 2014 +0100 + + sna/trapezoids: Remove stale assert + + The variable changed meaning, but the assert did not. Fix that up. + + Reported-by: Matti Hämäläinen + Signed-off-by: Chris Wilson + +commit 11c7f2d2f485e75feadb15d388960c581a96154d +Author: Chris Wilson +Date: Tue Oct 7 07:18:22 2014 +0100 + + sna: Add pixmap id to DBG hints inside rende migration + + Signed-off-by: Chris Wilson + +commit ec2b9ac81aed0d2dda2948171ca1c260184bf221 +Author: Chris Wilson +Date: Mon Oct 6 08:18:24 2014 +0100 + + sna: Avoid the intermediate allocation for PRIME pixmaps + + If we attempt to share an unused Pixmap, we first create an ordinary GPU + bo when migrating onto the GPU. Add a flag here to cause the migration + to create a Pixmap suitable for PRIME instead. + + Signed-off-by: Chris Wilson + +commit 649b233f12bdf04c449a813c3a150ac3ccfcab72 +Author: Chris Wilson +Date: Sun Oct 5 11:06:36 2014 +0100 + + sna/trapezoids: Remove redundant coverage scaling + + Since we do not perform an analytical pass, we can count samples directly. + + Signed-off-by: Chris Wilson + +commit 191c6b6ca7b3d2a1040c2633929845117ba1f1af +Author: Chris Wilson +Date: Sun Oct 5 09:05:20 2014 +0100 + + sna/trapezoids: Improve sample locations for imprecise rasterisation + + We need to sample at the mid-point of each subrow rather than at the + top and preserve the full precision of the edge gradients. + + Signed-off-by: Chris Wilson + +commit aa89ef69ac413abc65268a3758979b0edd1f3000 +Author: Chris Wilson +Date: Sun Oct 5 09:20:12 2014 +0100 + + sna: Double check for no residual CPU damage along redisplay fast path + + If we are using a CRTC source pixmap, it is possible that it is on the + CPU with a GPU bo and so requires flushing prior to the copy. + + Signed-off-by: Chris Wilson + +commit e50e1bb3fd2fd20cce580841b20a3e47c7111ee9 +Author: Chris Wilson +Date: Sun Oct 5 08:12:52 2014 +0100 + + sna: Only use copy redisplay fast path if we have a source GPU bo + + Odd as it may seem, but we can end up attempting to copy from a source + CRTC pixmap that is not on the GPU. Here we need to use the heavyweight + path to handle its composition normally. + + Reported-by: Christoph Haag + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84653 + Signed-off-by: Chris Wilson + +commit 7d60a9be3da1163866573d2ffda9635a914ac795 +Author: Chris Wilson +Date: Fri Oct 3 17:20:31 2014 +0100 + + sna: Update vblank interval after enabling outputs + + In a couple of cases we can re-enable CRTC. After doing so we should + recompute the minimum vblank interval. + + Signed-off-by: Chris Wilson + +commit a797c192adcc2b7aa9101089d3ee84b3e4f968ad +Author: Chris Wilson +Date: Thu Oct 2 07:22:39 2014 +0100 + + sna/dri2: Disable tracking stale back buffers without reuse-notifications + + If the Xorg does not support the ReuseNotify callback, and we use + double-bufferred pageflips, we set the stale flag on the backbuffer but + never clear it. This results in, for example, a compositor with Xorg-1.15 + and Prime active from updating the framebuffer. + + Reported-by: Dave Airlie + Signed-off-by: Chris Wilson + +commit de7185bbf48ca2f617466b98328d0fdae4df1b44 +Author: Chris Wilson +Date: Wed Oct 1 10:28:10 2014 +0100 + + sna/trapezoids: Fix comparison on right edge of trapezoids + + We need to compare the fixed ceiling rather the floor for accuracy. + + Signed-off-by: Chris Wilson + +commit c6d9303303a5ccb3ec6d072c510c09d6576cb398 +Author: Chris Wilson +Date: Wed Oct 1 10:25:16 2014 +0100 + + sna/trapezoids: Consistently use NO_GPU_THREADS to disable threading for DBG + + Signed-off-by: Chris Wilson + +commit bca08dc4155c0ee304c60340ccf95fe7b03ac11b +Author: Chris Wilson +Date: Mon Sep 29 19:30:03 2014 +0100 + + sna/trapezoids: Fix loss of precision through projection onto sample grid + + Preserve the original precision for the line vectors of the trapezoids, + and leave the final projection onto the x-cell until last. + + Finishes accidental wip commit in 8aff3898c35e3. + + Signed-off-by: Chris Wilson + +commit 6284ca5a7ebe9171abff6b41ad1644d7b7d0c7df +Author: Chris Wilson +Date: Mon Sep 29 16:32:30 2014 +0100 + + sna: Fix SHOW_BATCH_AFTER debugging aide + + Signed-off-by: Chris Wilson + +commit 8aff3898c35e348cec26db401047a562eb5ffa49 +Author: Chris Wilson +Date: Mon Sep 29 16:30:39 2014 +0100 + + sna: Clear padding in rotation properties for valgrind + + Signed-off-by: Chris Wilson + +commit 4a23d24db676dd7b535f226ff9624f892a53842a +Author: Chris Wilson +Date: Mon Sep 29 07:39:06 2014 +0100 + + sna; Markup that we are ignoring errors from early ScreenCreateResources + + In the early move-to-gpu in ScreenCreateResources we purposefully ignore + any errors from the move-to-gpu as they will be fixed up later when we + try to bind to the CRTCs. Mark it as ignored for future readers. + + Signed-off-by: Chris Wilson + +commit d036cdedf0913384b1e45bba80aa2c816be9c350 +Author: Chris Wilson +Date: Sun Sep 28 18:00:25 2014 +0100 + + sna: Use move-to-gpu for explicit handling of damage during fbcon copy + + Whilst it is unlikely that we do have any damage queued to the + frontbuffer prior to the copy, it is safer to use the migration tracking + machinery rather than guess. + + Signed-off-by: Chris Wilson + +commit ac492b9af99919d7c579ee4dd636ef6aab90c945 +Author: Chris Wilson +Date: Sat Sep 27 16:40:19 2014 +0100 + + man: Mention Option "AccelMethod" "none" + + Currently we only refer to "off" to disable the acceleration, but "none" + is probably more familar to users of other drivers. + + Signed-off-by: Chris Wilson + +commit 38e8c9104265440242dac2f0ef5b8c619a285be7 +Author: Chris Wilson +Date: Sat Sep 27 09:37:18 2014 +0100 + + man: Document the extended values supported by Option "DRI" + + Signed-off-by: Chris Wilson + +commit f785035d5bd42a778d4be0bf3ff8678bd7a7e503 +Author: Chris Wilson +Date: Fri Sep 26 21:01:43 2014 +0100 + + sna: Allow move-to-gpu to fail during ScreenCreateResources + + Before we attach the Screen Pixmap to the scanout, we will have to + create a GPU bo and apply any fixups as required. Therefore failing to + pre-emptively move it during ScreenCreateResource is not fatal and the + failure can be simply ignored. + + Suggested-by: Egbert Eich + Signed-off-by: Chris Wilson + +commit abc9b3f5753d602da296d50c8769cefb88ec473d +Author: Chris Wilson +Date: Fri Sep 26 09:22:50 2014 +0100 + + Add Skylake PCI IDs + + From kernel commit 72bbf0af0c76cbefe9cecbd2ed670b7555e03625 + Author: Damien Lespiau + Date: Wed Feb 13 15:27:37 2013 +0000 + + drm/i915/skl: Add the Skylake PCI ids + + Signed-off-by: Chris Wilson + +commit 7302f8a6482f4eed497536fc5a8a487c10da4d52 +Author: Chris Wilson +Date: Thu Sep 25 16:44:08 2014 +0100 + + sna: Pass scanout hints along to move-to-gpu + + Signed-off-by: Chris Wilson + +commit e9087f50bf6dafff87c566d3bdbe6cef29d71fde +Author: Chris Wilson +Date: Thu Sep 25 16:41:11 2014 +0100 + + sna: Check scanout Pixmaps are the correct pitch and convert if necessary + + As a final precaution, fixup the pitch on the bo to be used for + scanout by switching the bo on the Pixmap for a new correctly aligned + scanout bo. + + Reported-by: Egbert Eich + Signed-off-by: Chris Wilson + +commit 9f7c1a4c4f2a6352263c36e75a984ed4095adbc0 +Author: Chris Wilson +Date: Thu Sep 25 16:29:14 2014 +0100 + + sna: Check for scanout pitch restrictions on linear GPU bo + + When converting a linear cached CPU bo into an uncached GPU bo, we must + be careful to adhere to the scanout restrictions if they apply for this + transfer or this Pixmap. + + Reported-by: Egbert Eich + Signed-off-by: Chris Wilson + +commit 4827c518fe3323eedb56e7af7aef33801236d11f +Author: Chris Wilson +Date: Thu Sep 25 16:22:06 2014 +0100 + + sna: Use shadow CRTC bo if we fail to obtain an framebuffer for the Pixmap + + This should mask driver bugs whereby we ask the kernel to make a + framebuffer out of an improper bo. + + Signed-off-by: Chris Wilson + +commit f3d27eec52cac63378c0e466db971ae125c813a1 +Author: Chris Wilson +Date: Wed Sep 24 16:16:25 2014 +0100 + + sna/gen4+: Assert that the offset coordinate is within range if negative + + Invalid negative offsets could slip into the drawing rectangle + without triggering the assertion - the assertion being that they were + not greater than the maximum positive coordinate of the 3d engine. + + Signed-off-by: Chris Wilson + +commit a60ccd546e081f5b7bd7de762e1638927a4145a2 +Author: Chris Wilson +Date: Wed Sep 24 15:55:11 2014 +0100 + + sna: Relax constant numCrtcs assertion when ZaphodHeads is active + + If ZaphodHeads is active, each screen only has a subset of the CRTC + assigned to it, in fact just the single CRTC associated with the pipe of + that screen. In that case, we only expect to have the single CRTC and so + should not assert that we have a list of all CRTCS. + + It should still hold that we dynamically attach ZaphodHeads upon + hotplugging, so it is just the assert that is overzealous. + + Reported-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84281 + Signed-off-by: Chris Wilson + +commit 7637f547ca34668ef9d4f0c417de16e7126927b5 +Author: Chris Wilson +Date: Wed Sep 24 15:43:53 2014 +0100 + + sna: Tweak partial Picture extraction to prefer limiting to max 3D coordinates + + Where possible, keep the offset of the partial Picture within the 3D + coordinate limit so that we can use the DrawRectangle offset to + automatically adjust the coordinates. + + Signed-off-by: Chris Wilson + +commit 65a23ef90975f95444da103f45eb240b2895ef44 +Author: Chris Wilson +Date: Wed Sep 24 14:06:30 2014 +0100 + + sna: Reuse the same buffer when panning large CRTCs + + Rather than alternating between a pair of fb each time, we can reuse the + last shadow buffer so long as it remains the right size. + + Signed-off-by: Chris Wilson + +commit 911a0ad8d0520554dc55883997dd59dc3f5f9139 +Author: Chris Wilson +Date: Wed Sep 24 08:05:01 2014 +0100 + + sna/trapezoids: Flesh out alternate rasterisers for tristrips + + And undo the accidental commit of + + commit 4e00cbe35d1a409a02ee27d991213d9a0807e500 + Author: Chris Wilson + Date: Mon Sep 22 08:54:57 2014 +0100 + + traps + + Signed-off-by: Chris Wilson + +commit dbe6d105a60ff28419b549d439bbb29f50b28f08 +Author: Egbert Eich +Date: Wed Sep 24 08:18:32 2014 +0200 + + sna: Validate framebuffer tiling before creation + + In sna_pixmap_alloc_gpu() a different than the default tiling may be picked + by a usage hint. Before passing the tiling to kgem_create_2d() fix it up + by calling kgem_choose_tiling(). This avoids kgem_surface_size() not being able + to find a surface size for the tiling value. + + Fixes regression from + + commit a10781b70f222f3997928fa979f6292617f79316 [2.99.913] + Author: Chris Wilson + Date: Tue Jul 1 15:11:07 2014 +0100 + + sna: Enforce LinearFramebuffer option + + Signed-off-by: Egbert Eich + +commit b9dddc051d57b313fdc9f14ec388b060fdff3924 +Author: tobias.jakobi1@uni-bielefeld.de +Date: Tue Sep 23 20:13:11 2014 +0200 + + uxa/video: only call intel_xvmc_adaptor_init when xvmc is enabled + + Build regression from + + commit 616dea2c67847101fd43b5d89b556b3702c7f0bb + Author: Keith Packard + Date: Thu Jul 24 10:27:55 2014 -0700 + + Rename uxa-specific functions and structs + + Signed-off-by: Tobias Jakobi + +commit fe6ab444ad9d138aa011df6cee9f2cee65dbf493 +Author: Chris Wilson +Date: Wed Sep 24 07:54:39 2014 +0100 + + sna: Initialise the per-CRTC shadow bo on first use + + When we create the shadow pixmap for the CRTC, we should copy the + framebuffer contents into the shadow before we show it the first time. + This saves us from showing stale contents until the next redrawn in the + BlockHandler - with the proviso that we can do the copy on the GPU. + + Signed-off-by: Chris Wilson + +commit 1e403716d387be1d741537e02db207416080dbeb +Author: Chris Wilson +Date: Wed Sep 24 07:37:32 2014 +0100 + + sna/present: Make DBG statements uniform before present_event_notify() + + Signed-off-by: Chris Wilson + +commit 4e00cbe35d1a409a02ee27d991213d9a0807e500 +Author: Chris Wilson +Date: Mon Sep 22 08:54:57 2014 +0100 + + traps + +commit 376037e6336dfc3b32c51b774ab8a80f64390e02 +Author: Chris Wilson +Date: Sun Sep 21 19:51:47 2014 +0100 + + sna: Skip present unflip if the output is rotated + + With a rotated output and shadow buffers, we never perform the flip in + the first place and so can ignore the unflip request as well. + + Reported-by: Mihail Kasadjikov + References: https://bugs.freedesktop.org/show_bug.cgi?id=84105 + Signed-off-by: Chris Wilson + +commit 061785b1688de8dbf7ce9a423d16fb6d52518dc7 +Author: Chris Wilson +Date: Sun Sep 21 16:44:25 2014 +0100 + + sna/dri2: Decouple the Client event link on Drawable free + + We need to keep the two lists in check across asynchronous client/window + destruction. + + Signed-off-by: Chris Wilson + +commit cae4f4af2a0174ef36b9292eef7b9cf57afbfe83 +Author: Chris Wilson +Date: Sat Sep 20 19:24:33 2014 +0100 + + sna/trapezoids: Thread tristrip rasterisation + + Signed-off-by: Chris Wilson + +commit 12fc6687949c299d8c13751663217e7b37be7e43 +Author: Chris Wilson +Date: Fri Sep 19 11:00:39 2014 +0100 + + sna/gen8: Update DBG output of surface offset + + Signed-off-by: Chris Wilson + +commit 5ddd106e8f9b6a8176a7a5a82928067feaec0e03 +Author: Chris Wilson +Date: Thu Sep 18 10:34:11 2014 +0100 + + uxa/glamor: Silence compiler warnings + + Mark the stub intel_glamor_fd_from_pixmap() as inline to silence the + compiler warnings about unused function definitions. + + Signed-off-by: Chris Wilson + +commit 2a4855a633f42d90e11f5c51342c514c2dc24307 +Author: Chris Wilson +Date: Tue Sep 16 20:26:28 2014 +0100 + + sna: Constify argument to box_from_seg() + + Signed-off-by: Chris Wilson + +commit 1cc9762b08a127a2475a44da71ca07cb294562f2 +Author: Chris Wilson +Date: Tue Sep 16 12:14:31 2014 +0100 + + uxa: Fix conversion of Segments into Rectangles + + The trick is to make sure we consider the CapLast setting in the + direction the line is being drawn and adjust the inked pixels + accordingly. + + Testcase: DrawSegments/hv0 + Reported-by: Russell King + Signed-off-by: Chris Wilson + +commit db157b42aaa7880d98fed3e7493a19471e86e534 +Author: Chris Wilson +Date: Tue Sep 16 11:56:07 2014 +0100 + + test: Add DrawSegments + + Compare fb/ddx for many DrawSegments operations. + + Signed-off-by: Chris Wilson + +commit e453f276daa33a66a665e446a071d27e56ff15fe +Author: Chris Wilson +Date: Mon Sep 15 12:08:59 2014 +0100 + + sna/io: Initialise return code to catch early segfaults + + In case we are ever given an invalid buffer that we then attempt to read + past the end. + + Signed-off-by: Chris Wilson + +commit d470f0f520f6bd160ae4acef2b4b3c86afd8dbbd +Author: Chris Wilson +Date: Mon Sep 15 11:36:20 2014 +0100 + + sna: Last ditch attempt to make extra large batches fit + + If we have unfortunate fragmentation, e.g. a cursor is pinned in the + middle of an aperture, we can struggle to fit large objects, especially + fenced objects on gen2/gen3. We do have one last trick up our sleeves + that we can try: disable all of the outputs and cursors and try + submitting the batch in as pristine an aperture as we can arrange. We + can only hope that the subsequent restoration of the outputs is more + conducive to future batches (and so not lead us into continual flicker). + + Signed-off-by: Chris Wilson + +commit 435fe185e335a147f5edb803561509e1f0cb4e70 +Author: Chris Wilson +Date: Mon Sep 15 09:09:19 2014 +0100 + + sna: Update the list of outputs after a failed modeset + + In case we have a hotplug at just the wrong time, we can fail a modeset + with a stale connector. Before attempting to recover, probe the kernel + for the current state. + + Signed-off-by: Chris Wilson + +commit 067115a51b2646538a38ba603c688233c61e23cd +Author: Chris Wilson +Date: Mon Sep 15 08:44:41 2014 +0100 + + uxa: Stub out intel_sync_init|fini when not compiled in + + In order to fix the build without DRI3, we need to stub out the + functions not compiled in, such as intel_sync_fini(). + + Reported-by: Sedat Dilek + Signed-off-by: Chris Wilson + +commit 0d451ee3891d87268322dc3b72b487fdd2fbade6 +Author: Chris Wilson +Date: Mon Sep 15 08:15:04 2014 +0100 + + configure: Require the presence of xorg/glamor.h for --enable-glamor + + Check that we have the required Xorg headers for glamor if the user + requests --enable-glamor. There is a possiblity that the headers + mismatch as they don't have internal versioning, but this should catch + the majority of errors early on. + + Signed-off-by: Chris Wilson + +commit 11444619457aa8121efc937291f1d944ac42265d +Author: Keith Packard +Date: Sat Sep 13 01:09:48 2014 -0700 + + glamor: Do version check for fd <-> pixmap functions + + glamor_pixmap_from_fd and glamor_fd_from_pixmap were added before + version 1.15.99.902, so check for that version before trying to use them. + + Signed-off-by: Keith Packard + Tested-by: Fabio Pedretti + +commit 48f6406a62c06a09b173d82b8eb79761188ff717 +Author: Keith Packard +Date: Sat Aug 16 19:05:57 2014 -0700 + + Use intel_uxa.h in all uxa-specific files + + Instead of always including intel_uxa.h from intel.h, and including + uxa.h from some files directly, use intel_uxa.h directly from .c files + that have UXA-specific code in them. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 8b59a88c23c4795f6d829efb91a0d40e52d20014 +Author: Keith Packard +Date: Sat Aug 16 18:42:28 2014 -0700 + + intel_present.c does not need to include uxa.h + + There aren't any symbols from uxa.h used in this file, remove the #include. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit d83b30b7042dd0207116f4a059637794c4becb04 +Author: Keith Packard +Date: Sat Aug 16 18:40:40 2014 -0700 + + Move some UXA-specific code under #if USE_UXA. + + This makes the UXA-specific elements of intel_screen_private and a bit + of code in intel_driver covered under #if USE_UXA + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit e3c06746c7c22dcc2a862859c6f45dd1dfecdca7 +Author: Keith Packard +Date: Sat Aug 16 18:34:55 2014 -0700 + + Move UXA hardware initialization into intel_uxa_init + + Pull this uxa-specific step out of I830ScreenInit + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 876185cceeb9589ae395e0c2eedd163129f1e51b +Author: Keith Packard +Date: Thu Jul 24 11:02:35 2014 -0700 + + Add intel_flush to abstract flushing pending acceleration operations + + intel_flush flushes any pending acceleration operations to the + hardware, just like intel_uxa_batch_submit does today except that it is + not uxa-specific. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 616dea2c67847101fd43b5d89b556b3702c7f0bb +Author: Keith Packard +Date: Thu Jul 24 10:27:55 2014 -0700 + + Rename uxa-specific functions and structs + + This starts to separate uxa from the rest of the driver by renaming + uxa-specific functions and structs to make it clear which portions of + the driver are uxa-specific and which are common. + + Signed-off-by: Keith Packard + Acked-by: Eric Anholt + +commit 57c67199d043f3a653436769f1a69947a96d9d5b +Author: Keith Packard +Date: Sat Jul 19 19:54:39 2014 -0700 + + Move intel_alloc_framebuffer to intel_memory.c + + UXA and Glamor both share this function, so move it out of the UXA file. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit ff67a8d885d12d52693c33c52f3c551f69a8acf7 +Author: Keith Packard +Date: Sat Jul 19 19:59:43 2014 -0700 + + Do more checks for proposed flip pixmaps + + Make sure the pitch matches the current framebuffer. + Make sure there's a BO we can get at. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 61305740ef3dcd4ee10b335574d659d7c886d29a +Author: Keith Packard +Date: Sat Aug 16 17:05:35 2014 -0700 + + Eliminate pixmap private 'stride' field, which duplicates devKind + + The pixmap private stride field is an exact duplicate of the devKind + field present in the core pixmap; eliminate the duplicate value and + replace references by calls to intel_pixmap_pitch. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 1ac76b47b3dd8d14017271f5abd72664c71021c5 +Author: Keith Packard +Date: Tue Jul 22 00:54:16 2014 -0700 + + Don't use GetScratchPixmapHeader for shadow pixmaps + + GetScratchPixmapHeader should only be used for local memory pixmaps, + as used by PutImage and friends. That's because when you free the + scratch pixmap header, it doesn't actually free the pixmap; instead, + it gets stuffed in pScreen->pScratchPixmap and any private data stored + on it will be left hanging around forever. + + In the case of glamor, that private data includes all of the GL + state. Using that scratch pixmap later results in glamor getting + mightily confused as the pixmap and underlying objects do not match. + + Avoid this by allocating pixmap headers explicitly for this purpose. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 4f5a5683979bae2283775f3b94da32a05e24e0c0 +Author: Keith Packard +Date: Sat Aug 16 18:36:57 2014 -0700 + + Declare variable holding option value as 'const char *' + + This matches the type of xf86GetOptValString. + + Signed-off-by: Keith Packard + +commit 4e77993e9965ca65e66bd42b688f7f2e64dd3a7d +Author: Keith Packard +Date: Wed Jul 30 23:40:55 2014 -0700 + + Remove redundant calls to drm_intel_bo_disable_reuse + + intel_allocate_framebuffer has already made the call in each of these + code paths. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit c2f214fb549499fe2a1ab245e0438270b1a935ed +Author: Keith Packard +Date: Sat Jul 19 19:52:56 2014 -0700 + + Fix present debug output + + Was using 'low_msc', which isn't defined anymore. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 9ca7b8771c7f5253fdcafafed751af31f1ad3828 +Author: Keith Packard +Date: Fri Sep 12 13:44:49 2014 -0700 + + glamor: Add DRI3 support to glamor code paths + + This creates wrappers to invoke glamor functions for pixmap_from_fd + and fd_from_pixmap when the driver is using glamor. + + Signed-off-by: Keith Packard + +commit fa6f6839dc7e23cdbeef4379ded31ead3ea3968c +Author: Keith Packard +Date: Tue Jun 17 18:12:42 2014 -0700 + + Correct BO allocation alignment + + BO allocations for pixmaps must be aligned to the tile height, but at + some point the code was changed to align them to twice the tile + height. This overallocates pixmaps, wasting memory, but more + importantly, for buffers allocated by DRM and shared through DRI3, the + stricter alignment check causes sharing to fail. + + From reading through the history of the code and related bugs, it + seems like this change was part of a set of changes trying to address + what turned out to be a kernel regression. Reverting this change + solves the DRI3 problem and saves a bit of memory for pixmap + allocations. + + Signed-off-by: Keith Packard + Tested-by: Kenneth Graunke + Reviewed-by: Eric Anholt + +commit c2a834689142a1b9d8bbe48a6cdc0f5286d8b7e5 +Author: Keith Packard +Date: Wed Sep 10 09:35:38 2014 -0700 + + Do not clear pending kernel events on mode switch + + Let the kernel send these back to us so that DIX hears about them in + the usual way. + + Mode setting while Present has a flip active will trigger an unflip + before the mode is changed. The event from that unflip will not get + processed before the mode switch is executed. Clearing the driver + queue at mode switch time will discard the connection between the + kernel event and the present callback so that DIX will never know that + the flip pixmap is idle. + + Signed-off-by: Keith Packard + Tested-by: Kenneth Graunke + +commit 7ed66ca0fd1160ede890c216c35d4ac42a98ab57 +Author: Chris Wilson +Date: Fri Sep 12 21:17:04 2014 +0100 + + sna: Remvoe unused code + + sna_trapezoids_precise.c:566:1: warning: unused function + 'polygon_add_line' [-Wunused-function] + + gen4_vertex.c:3093:1: warning: unused function + 'gen4_choose_spans_vertex_buffer' [-Wunused-function] + + Reported-by: Zdenek Kabelac + +commit f0d5dbe9bf0d507fd5b60bd7a90be09351f75249 +Author: Chris Wilson +Date: Fri Sep 12 21:16:12 2014 +0100 + + sna: Fix include guard + + ./xassert.h:24:9: warning: '__XASSERT_H___' is used as a header guard + here, followed by #define of a different macro [-Wheader-guard] + ^~~~~~~~~~~~~~ + ./xassert.h:25:9: note: '__XASSERT_H__' is defined here; did you mean + '__XASSERT_H___'? + ^~~~~~~~~~~~~ + __XASSERT_H___ + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 7548f77fff1832c038e624c655d534387619d825 +Author: Chris Wilson +Date: Fri Sep 12 21:15:18 2014 +0100 + + intel-virtual-output: Initialise width/height for a disabled output + + virtual.c:1081:6: warning: variable 'width' is used uninitialized + whenever 'if' condition is true [-Wsometimes-uninitialized] + if (clone->dst.mode.id == 0) { + ^~~~~~~~~~~~~~~~~~~~~~~ + virtual.c:1092:6: note: uninitialized use occurs here + if (width == clone->width && height == clone->height) + ^~~~~ + virtual.c:1081:2: note: remove the 'if' if its condition is always false + if (clone->dst.mode.id == 0) { + ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + virtual.c:1079:11: note: initialize the variable 'width' to silence this warning + int width, height; + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit a5a51b55ec07e03c87a9916eca6d023ccaf7d00b +Author: Chris Wilson +Date: Fri Sep 12 14:31:22 2014 +0100 + + sna: Mark the CRTC as disabled when hiding the plane + + Signed-off-by: Chris Wilson + +commit 5ce4b344e497364b16a507b39b7637a00daa957a +Author: Chris Wilson +Date: Fri Sep 12 14:29:12 2014 +0100 + + sna: Avoid stalls when promoting to the GPU before an operation + + In particular, the promotion of an active snooped bo into an uncached + linear GPU bo was being performed on a busy buffer and forcing a stall. + + Signed-off-by: Chris Wilson + +commit fc4bc3cde9e35ecde5b2c8eeecdbbb6ba29f32ae +Author: Chris Wilson +Date: Fri Sep 12 16:10:12 2014 +0100 + + sna: Initialise remaining batch space + + Another missed gcc warning resulting in a crash due to a missing + kgem_batch_space() initialisation. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 9fb399aee99ad98996f872477c133f08795ec54c +Author: Chris Wilson +Date: Fri Sep 12 08:24:06 2014 +0100 + + sna/blt: Fix computation of remainaing boxes on gen8+ + + Signed-off-by: Chris Wilson + +commit e3edf2948467ad989590a347ffe687780192be16 +Author: Chris Wilson +Date: Fri Sep 12 07:53:12 2014 +0100 + + sna: DBG compile fix + + Dereference the right output for the name in the new backlight + functions. + + Signed-off-by: Chris Wilson + +commit 1aefd16964c30264c05d136cef3e1e7de5eb9c53 +Author: Chris Wilson +Date: Fri Sep 12 07:46:43 2014 +0100 + + sna: Use default monitor options on the first output + + commit 6554cf0a69f04710b64f3488384fe5cb2748dc35 + Author: Chris Wilson + Date: Mon Aug 11 12:22:17 2014 +0100 + + sna: Parse output options early during initialisation + + rearranged the monitor query to before the num_outputs increment. The + result was that it choose the second output as the default and not the + intended first. + + Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=522500 + Signed-off-by: Chris Wilson + +commit 9e397830f5ea56f2e43430666c78ffc574058d45 +Author: Chris Wilson +Date: Thu Sep 11 17:02:37 2014 +0100 + + sna/gen8: Re-enable userptr + + Current testing says that it is stable now... Let's see how long that + holds. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79053 + Cc: Mika Kuoppala + Signed-off-by: Chris Wilson + +commit 797369449b87cbd578f9fb96f34b065e548755f6 +Author: Chris Wilson +Date: Thu Sep 11 09:37:11 2014 +0100 + + sna: Do not mark the pixmap as cleared in the middle of a miSpans decomposition + + As the miSpans will continue to overdraw the Pixmap, it's final state + will no longer be that clear value. We need to be much more careful when + allowing that optimisation. + + Reported-by: Tyler Foo + References: https://bugs.freedesktop.org/show_bug.cgi?id=77074 + Signed-off-by: Chris Wilson + +commit fda1ffb07e17469771bba7a8d53fd44c43ee3333 +Author: Chris Wilson +Date: Thu Sep 11 08:11:34 2014 +0100 + + sna: Request the backlight to be disabled along with DPMS off + + When we turn off the screen, either at the user request or when + disabling an output, request that the associated backlight (which may + only be known to userspace) also be disabled. + + Signed-off-by: Chris Wilson + +commit 08921e4bda0114c66270e500090e4cfd29f74d39 +Author: Chris Wilson +Date: Thu Sep 11 08:03:41 2014 +0100 + + backlight: Expose interface to switch backlight on/off entirely + + A feature in recent kernels is to disambiguate between the meaning of + brightness=0, between disabling the the backlight entirely or setting + the lowest valid brightness. As such, we now have an extra knob in sysfs + to explicitly request that the backlight be turned off. + + Signed-off-by: Chris Wilson + +commit f2b62ab38f0f5970b2f868e10dc3499ff3118dbb +Author: Chris Wilson +Date: Wed Sep 10 16:52:36 2014 +0100 + + sna: Prune damage that covers the entire target Pixmap + + Reduce it early and mark it complete. + + Signed-off-by: Chris Wilson + +commit 9b25eeee85d32223841640c3a39901e4b63707ce +Author: Chris Wilson +Date: Wed Sep 10 16:37:16 2014 +0100 + + sna: Do apply damage twice for miSpans.PolyFillRect + + As the caller will apply the damage afterwards, we do not need to do the + accumulation in the miSpans callbacks and it presumes that its damage is + unaltered. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77074 + Signed-off-by: Chris Wilson + +commit 224af800f695b50ba5a65b5a2b9ca1e7a88d4e1a +Author: Chris Wilson +Date: Wed Sep 10 11:48:40 2014 +0100 + + sna: Emit assertions with FatalError + + The intention is to be able to capture the assertion in the Xorg.0.log + (journald equivalent). At the moment, it is emitted to stderr which is + difficult to capture and defeats the goal of only asking the reporter to + upload one log file. + + Signed-off-by: Chris Wilson + +commit 0d1df4762ffd7babb95a5f48f77487a6c7db83fe +Author: Chris Wilson +Date: Wed Sep 10 08:36:18 2014 +0100 + + sna: Relax early failure to set KMS modes + + Under the new world order, we may not have KMS rights until we are given + a VT. + + Signed-off-by: Chris Wilson + +commit f39e1d19c166a97a74974edf3fe79082d3a46d2b +Author: Chris Wilson +Date: Wed Sep 10 07:04:55 2014 +0100 + + sna: Fix use of GETBLOB ioctl for grabbing the MST path + + Unlike the other drm getters, GETBLOB insists on the exact length rather + than being told the buffer size. + + Reported-by: Dave Airlie + Signed-off-by: Chris Wilson + +commit 07fe45b84bdf0d236a5bfdc433cc1a908e0c161b +Author: Chris Wilson +Date: Tue Sep 9 08:12:45 2014 +0100 + + sna/glyphs: Prevent NULL vfunc deref with glyphs + + Requires running a PRIME setup with Intel loaded as the secondary GPU + and attempting to execute an empty glyph string. + + Signed-off-by: Chris Wilson + +commit faf0bdd477b9ec73f943c3101a3ae30fd6d579ea +Author: Chris Wilson +Date: Tue Sep 9 07:36:40 2014 +0100 + + sna: Add some DBG spam for BLT boxes + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77074 + Signed-off-by: Chris Wilson + +commit e0f7e9fc2f0b39b9e939ff48edea29950f125420 +Author: Chris Wilson +Date: Mon Sep 8 16:49:29 2014 +0100 + + sna: Initialise and check for batch space + + commit 30932a7b9d255c2037bee19e01aa3edc37b07386 + Author: Chris Wilson + Date: Mon Sep 8 12:41:06 2014 +0100 + + sna: Avoid u16 underflow when computing reserved batch space + + relied on gcc a little to much to warn me when I missed initialising 'rem' + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77074 + Signed-off-by: Chris Wilson + +commit 30932a7b9d255c2037bee19e01aa3edc37b07386 +Author: Chris Wilson +Date: Mon Sep 8 12:41:06 2014 +0100 + + sna: Avoid u16 underflow when computing reserved batch space + + If we filled the batch exactly, then subtract -1 for the reserved + BATCH_BUFFER_END, it would underflow to a large value - convincing us + that we had sufficient room to stuff many, many more commands in. + + However, all the callsites should be guarded by checking already that + they had sufficient space to emit at least one operation... + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77074 + Signed-off-by: Chris Wilson + +commit 692c14d405bb352697b67f36a034d4963e272b66 +Author: Chris Wilson +Date: Mon Sep 8 08:53:32 2014 +0100 + + 2.99.916 snapshot + +commit 84fb3bb65ff917b908a1036540432bfd5525481d +Author: Dave Airlie +Date: Mon Sep 8 17:46:18 2014 +1000 + + uxa: actually create the randr outputs for hotplug connectors + + I somehow lost this chunk in my mst patch I sent. + + Signed-off-by: Dave Airlie + +commit 001c542618aad25137029dcc28aa520766040964 +Author: Chris Wilson +Date: Mon Sep 8 07:54:25 2014 +0100 + + 2.99.915 snapshot + +commit db01c9d627412f05f5e5448b5f4c1d3814d522fa +Author: Chris Wilson +Date: Mon Sep 8 07:13:47 2014 +0100 + + sna: Fix backlight assertion after only hiding planes + + If we only hide the planes, we do not turn off any outputs and so can + skip resetting the backlight entirely. + + Signed-off-by: Chris Wilson + +commit da0c9638d7c54b12990531fc478b2dd523ed4db9 +Author: Chris Wilson +Date: Mon Sep 8 07:07:08 2014 +0100 + + sna: Fix an unreachable piece of code + + It doesn't do anything but the static analyzers at bay. + + Signed-off-by: Chris Wilson + +commit 908520a7dacade8b6716e7c30549847464a33a81 +Author: Dave Airlie +Date: Wed Sep 3 10:43:21 2014 +1000 + + uxa: add MST support. + + This adds MST support to the UXA paths in the driver. + + Signed-off-by: Dave Airlie + [ickle: Restore current output naming scheme] + +commit b64a8f0e3e850e698a66e93fde36f846b39ea8cb +Author: Dave Airlie +Date: Wed Sep 3 10:43:20 2014 +1000 + + uxa: drop mode_res caching. + + This will cause problems with MST displays which need to update the + connector list after topology changes. + + Signed-off-by: Dave Airlie + +commit aca0bf6387c159a3d54dbbe52dd65fd92df98216 +Author: Chris Wilson +Date: Sun Sep 7 13:32:12 2014 +0100 + + sna/gen2: Fallback to kernel batch w/a rather than incur a stall + + If we have no pinned batches available, use the kernel w/a if available + rather than stall waiting for an active batch. + + Signed-off-by: Chris Wilson + +commit 57bf3d5f0fb4429b0991ad6f22000348820f5bd1 +Author: Chris Wilson +Date: Sun Sep 7 17:22:31 2014 +0100 + + sna: Disable the fb on switching away from X + + Currently we turn off the CRTCs when switching away from X in order to + not leak our framebuffer. With the new drm_plane support, we can simply + unset the framebuffer, which should be a lighterweight operation than + disabling the CRTC. + + Signed-off-by: Chris Wilson + +commit c17d3b5d5cdbda510a2b6955c3a171457ecde7e5 +Author: Chris Wilson +Date: Sun Sep 7 17:20:29 2014 +0100 + + sna: Compute clones on final ordering + + The clones are indices into the output arrays, so recompute the clones + if we reorder the outputs. + + Signed-off-by: Chris Wilson + +commit aa10f480c566b8523cdd49b3e23f64b7b9625987 +Author: Chris Wilson +Date: Wed Sep 3 10:24:19 2014 +0100 + + sna: Drop false IGNORE_DAMAGE hint + + IGNORE_DAMAGE is used by sna_drawable_use_bo to ignore both CPU/GPU + damage. It used to only ignore CPU damage, but now is a more general + hint. However, here we were intending to only say ignore the cpu damage + that we explicitly discarded anyway. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=81973 + Signed-off-by: Chris Wilson + +commit 51e364ded28e9a8e02a380c041a2c5784381df35 +Author: Chris Wilson +Date: Wed Sep 3 10:23:18 2014 +0100 + + sna: Trace move-to-gpu overrides with extra DBG + + Signed-off-by: Chris Wilson + +commit ee7ed478a2bb81c923d29106b0b1dfd73161c2fc +Author: Chris Wilson +Date: Wed Sep 3 08:20:03 2014 +0100 + + sna: Skip over hotunplugged outputs during CRTC set + + These outputs are already marked as disconnected and so should be + excluded from the CRTC set, but to be safe skip over them. + + Signed-off-by: Chris Wilson + +commit 48a33fc379b17eed195875222ad773c911d9dff1 +Author: Chris Wilson +Date: Tue Sep 2 19:08:36 2014 +0100 + + sna/trapezoids: Use the corrected trapezoid origin for aligned boxes + + The rule for the origin of the CompositeTrapezoids routine is the + upper-left corner of the first trapezoid. Care must be taken in case the + trapezoid edge is upside down to consider the upper vertex. + + Reported-by: "Jasper St. Pierre" + Signed-off-by: Chris Wilson + +commit 84333f6213abb28838656d8352fd537ad68e4189 +Author: Chris Wilson +Date: Tue Sep 2 19:13:16 2014 +0100 + + sna: Leave more Pixmap breadcrumbs in DBG + + Add the Pixmap id to various DBG messages to make it easier to track + rendering. + + Signed-off-by: Chris Wilson + +commit 407817ebb9129f1b946c7ba68e3e05d9540f478c +Author: Chris Wilson +Date: Mon Sep 1 17:02:44 2014 +0100 + + sna: Reject invalid CopyArea based on source clipping earlier + + Given a ridiculous CopyArea, say copying from (-32000,-32000), the + region extents will wrap around when translated before the final clip + and reject test. To overcome this, do source based rejection earlier + before the potential underflow. + + Signed-off-by: Chris Wilson + +commit 92b37783eb2e9166efd82325f14d05de6a082081 +Author: Chris Wilson +Date: Mon Sep 1 15:05:05 2014 +0100 + + test/README: Add missing trailing characters from cut'n'paste + + When copying the command from the terminal I failed to highlight the + last character. + + Signed-off-by: Chris Wilson + +commit ab01c1211e40f788fb2970ad03930bbaa92e58d4 +Author: Chris Wilson +Date: Mon Sep 1 13:37:30 2014 +0100 + + sna: Fallback to normal composite if the blt redisplay fails + + Signed-off-by: Chris Wilson + +commit 21cc987ca8a531e399350564a5af7f551406b8d6 +Author: Chris Wilson +Date: Mon Sep 1 07:19:09 2014 +0100 + + sna: Only decouple the event once + + If the client and drawable destroys are racing, we may trigger the event + removal twice. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=83183 + Signed-off-by: Chris Wilson + +commit 2c564c04bcde88d730ca111acfb6798bdf0d66da +Author: Jonathan Gray +Date: Sun Aug 31 18:48:56 2014 +1000 + + configure: check for cpuid.h + + Instead of checking for a particular version of GCC check for + a cpuid.h with __cpuid_count. This allows cpuid.h to be + provided for older/different compilers. + + Signed-off-by: Jonathan Gray + [ickle: Delete the bare and redundant config.h] + +commit e8ad453a0ae9d701b41cc026d5d40f55dd4590c5 +Author: Chris Wilson +Date: Sun Aug 31 11:45:57 2014 +0100 + + intel: Only include sys/mount.h on Linux + + We only automount debugfs for Linux, but sys/mount.h on BSD has unmet + dependencies breaking the build. + + Reported-by: Jonathan Gray + Signed-off-by: Chris Wilson + +commit 2086965e5c0781e0a3996de89e4dda03c5d42610 +Author: Chris Wilson +Date: Fri Aug 29 10:37:09 2014 +0100 + + gen8: Refresh video render programs + + Reported-by: Timo Aaltonen + References: https://bugs.freedesktop.org/show_bug.cgi?id=83207 + Signed-off-by: Chris Wilson + +commit b822bc8c2c0b47dfc391c86c3e5764f718898dce +Author: Chris Wilson +Date: Fri Aug 29 10:14:35 2014 +0100 + + sna/gen8: Check instead of asserting for a hang whilst setting up video state + + Signed-off-by: Chris Wilson + +commit 8f584f83dc8440f0cbec7db3ed8a071d4896c25a +Author: Chris Wilson +Date: Fri Aug 29 09:52:51 2014 +0100 + + tests: Add a couple of gstreamer pipeline hints + + Having worked out how to use gstreamer, record the pipelines for + posterity. + + Signed-off-by: Chris Wilson + +commit 69d584c6acdcd645ee4cc4892e56940d2d4074f6 +Author: Chris Wilson +Date: Fri Aug 29 07:26:32 2014 +0100 + + sna: Prepare fr changes in dirty tracking api (Prime) + + Future commit "pixmap: fix reverse optimus support with multiple heads" + will allow for tracking within pixmaps (i.e. break the presumption that + everything starts at offset 0,0 in the target pixmap). + + Signed-off-by: Chris Wilson + +commit f95d04b75b71ad523eb3e0e3fc9ad711c58ab43b +Author: Chris Wilson +Date: Wed Aug 27 10:05:07 2014 +0100 + + intel-virtual-output: Use snprintf() for simplicity + + Third one-line patch to fix copying from the tainted user argument into + the socket's path buffer. This time, give in and just use snprintf() as + it guarrantees that it will not write more than 'n' characters and that + the last is a NUL byte. + + Suggested-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 011f04ff8e9aca696e26ecef0e68132a24a9b094 +Author: Chris Wilson +Date: Tue Aug 26 18:30:17 2014 +0100 + + intel-virtual-output: Fix invocation of strncpy() + + Somebody (me) confused it with snprintf() and put the string length in + the wrong location. Also note that strncpy() does not NUL terminate long + strings. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 016599783cf3e1a3e2362c82c8767a7398048db7 +Author: Chris Wilson +Date: Tue Aug 26 12:44:58 2014 +0100 + + intel: Limit read to always fit in the buffer + + Reported-by: Zdenek Kabelac + Suggested-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit e827f80e5c07ac13802a24753b249e05e18a290e +Author: Chris Wilson +Date: Tue Aug 26 12:42:11 2014 +0100 + + intel-virtual-output: Sanity check length on user supplied socket path + + Reported-by: Zdenek Kabelac + Suggested-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 51037706b068b52b7c8984527c209d295e1e3584 +Author: Chris Wilson +Date: Tue Aug 26 11:43:28 2014 +0100 + + sna: Fix attaching to a headless configuration + + ADDFB fails with a headless config (as any fb size is invalid). + Fortunately, with headless we can use any depth we like. + + Signed-off-by: Chris Wilson + +commit 8c5229cf8fc642f8b7e091c38bfd27032ee5e48c +Author: Chris Wilson +Date: Sun Aug 24 16:25:05 2014 +0100 + + sna: Make one last gasp at submitting the execbuffer before bailing + + Signed-off-by: Chris Wilson + +commit d209b03915e4d12ce445d72ac09bb4fe664ba664 +Author: Chris Wilson +Date: Sun Aug 24 07:05:35 2014 +0100 + + configure: Add guards for os.h redefines + + os.h redefines a few common libc functions, so check if the host + provides them first and inform os.h if that is the case. + + Suggested-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 12c051d5c673d79c16a3a1478c0977799484ca95 +Author: Chris Wilson +Date: Sat Aug 23 15:33:13 2014 +0100 + + sna/dri2: Unhook event from draw list upon client destruction + + When the client goes away, we need to free its events. However, we + have to defer the freeing of any pending event (ones currently routed + through the kernel) for those we need to remember to decouple the event + from the Drawable's list before they are freed. + + Reported-by: John Lindgren + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82979 + Signed-off-by: Chris Wilson + +commit 1bbacf80a9c4e7a259f896064b5cb147c4523f12 +Author: Chris Wilson +Date: Sat Aug 23 15:32:39 2014 +0100 + + sna/dri2: Assert event is queued when marked as next pending flip + + Signed-off-by: Chris Wilson + +commit 48000371c9fba8dfa84ffd3228e8f74cc477ddce +Author: Chris Wilson +Date: Sat Aug 23 15:02:24 2014 +0100 + + sna/dri2: Remove the redundant parameter passed to free event + + draw is always the same as event->draw, so just use event->draw. + + Signed-off-by: Chris Wilson + +commit fef2f4dbaeb6e206786d63dafe4156f978a4422d +Author: Chris Wilson +Date: Fri Aug 22 18:57:32 2014 +0100 + + sna: DBG message fix for !xvmc + + Signed-off-by: Chris Wilson + +commit 9b2cf5c7ab6e1a4a9aa46b297fb2f90cb09124ec +Author: Chris Wilson +Date: Thu Aug 21 08:17:41 2014 +0100 + + sna: Propagate failure from changing backlight value + + Especially when we delete the output property halfway through and the + ChangeProperty routine then attempts to wire it back up... + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82833 + Signed-off-by: Chris Wilson + +commit 61ec162dc9f4204e26e7786ef26e7abf9ed37ed2 +Author: Chris Wilson +Date: Thu Aug 21 07:21:59 2014 +0100 + + backlight: Move the fd out of the select range + + Signed-off-by: Chris Wilson + +commit 726f1a38a572a8a6121e5194269fb549c363d9f6 +Author: Chris Wilson +Date: Thu Aug 21 07:04:01 2014 +0100 + + sna: Only send the bl change notification if the randr_output exists + + Signed-off-by: Chris Wilson + +commit f5469681b620d9d6ccaf53e92ed31f931cb03b0d +Author: Chris Wilson +Date: Mon Aug 18 14:37:44 2014 +0100 + + sna: Be defensive during FreeScreen() + + Signed-off-by: Chris Wilson + +commit bfacb9d8dcd0fd590af3cb9fddc81904ef1e273b +Author: Chris Wilson +Date: Mon Aug 18 14:37:19 2014 +0100 + + sna: Add some DBG warnings for early PreInit failures + + Signed-off-by: Chris Wilson + +commit 02f184e0ef428d9d80fecbaa438a7cbd87c18a91 +Author: Chris Wilson +Date: Mon Aug 18 07:43:21 2014 +0100 + + test: Make SHM tests in lowlevel-blt-bench optional + + A slightly more complex patch to disable the SHM based tests of + lowlevel-blt-bench when MIT-SHM support is not available at compile + time. + + Signed-off-by: Chris Wilson + +commit 9058dac3029b0e4f35eaa8ac101d38f3071f3c52 +Author: Chris Wilson +Date: Mon Aug 18 07:23:27 2014 +0100 + + test: Only compile lowlevel-blt-bench if we have shm + + Since 37ac34c4e4500bfc272222754949edc1dbb8c7e2, lowlevel-blt-bench + requires SHM support, so only compile it if we detect such during + configure. + + Signed-off-by: Chris Wilson + +commit 16b9447c5178611ce32e10620e62007ba5445918 +Author: Chris Wilson +Date: Mon Aug 18 07:00:48 2014 +0100 + + intel: Only dump debugfs on linux + + Other platforms are not going to have the same debug infrastructure, nor + even the same mount(2). + + Signed-off-by: Chris Wilson + +commit f8e632f396bf4b0473dca0516567d56a29954cf3 +Author: Chris Wilson +Date: Thu Aug 14 21:35:34 2014 +0100 + + sna: Select appropriate tiling mode for TearFree shadow buffer + + Signed-off-by: Chris Wilson + +commit c3b093b3c0676d6c9851af2b0c16806140c55258 +Author: Chris Wilson +Date: Thu Aug 14 21:32:48 2014 +0100 + + sna: DBG log invalid surface sizes + + Signed-off-by: Chris Wilson + +commit e59ea828f521e2f1963152a9211c36b8091bf655 +Author: Chris Wilson +Date: Thu Aug 14 21:31:32 2014 +0100 + + sna: DBG log all bo allocation failure paths + + Signed-off-by: Chris Wilson + +commit 9b8f7db5c93b4b687670ad9340fec6a857cd065e +Author: Chris Wilson +Date: Thu Aug 14 21:27:34 2014 +0100 + + sna: DBG Log all failure paths in allocating CRTC pixmaps + + Signed-off-by: Chris Wilson + +commit e461427ad3667554a01b5b74525a15d19538a8e5 +Author: Chris Wilson +Date: Thu Aug 14 21:19:10 2014 +0100 + + sna: Add error message to explain modesetting failures due to allocation + + Since this is an error path with a major user visible failure (the + modeset fails), make sure that we log the reason. + + Signed-off-by: Chris Wilson + +commit 72ed21c694aecba1e91089479b2cb5f957548fec +Author: Chris Wilson +Date: Thu Aug 14 21:09:12 2014 +0100 + + sna: Do not force creation of a linear GPU bo that we don't want + + Signed-off-by: Chris Wilson + +commit 3bb9311e5de8bb39423397213d3de0e0ec4fcbd5 +Author: Chris Wilson +Date: Thu Aug 14 17:38:49 2014 +0100 + + sna: Use a shadow buffer for linear framebuffer + + Signed-off-by: Chris Wilson + +commit 0f1280bab9c99b15ba835a0094d8b849846d13f6 +Author: Chris Wilson +Date: Thu Aug 14 07:37:06 2014 +0100 + + sna/dri2: Fix compilation with Xorg-1.12.4 + + In Xorg-1.12.4 we have DRI2 version 6 (and so triple buffering support + by Xorg) but we don't yet have Prime. Remove the check for the Prime bug + in the Xserver for that case. + + Reported-by: Axel Rohde + Signed-off-by: Chris Wilson + +commit d974dabc8ac06e76bffe5824caf86fd072c35ed3 +Author: Chris Wilson +Date: Wed Aug 13 07:58:57 2014 +0100 + + sna: Relax the square cursor assumption + + Internally only use a square cursor, but 845g/865g actually supports + rectangular cursors (as they have a relaxed cursor height restriction). + + Signed-off-by: Chris Wilson + +commit ec10cef592b7a3d1dc3c4949778e72e8cd156245 +Author: Chris Wilson +Date: Tue Aug 12 10:52:12 2014 +0100 + + sna: Only apply a DPMS change for an enabled CRTC + + Mostly paranoia, but we need to validate that the stored mode is valid + before applying the modeset. + + Signed-off-by: Chris Wilson + +commit 9cc72c2dc7130d3d5731f7e75f35f10302389f08 +Author: Chris Wilson +Date: Tue Aug 12 10:49:20 2014 +0100 + + sna: Suppress "switch to mode" messages for internal CRTC applies + + We only want to log a mode change when it is initiated by the user. For + internal updates, such as changing the frame or restoring a mode from + DPMS, we want to silently apply the current mode. + + Signed-off-by: Chris Wilson + +commit b3138bee8db7db6ebaa10ecdd09c47f899d24c8c +Author: Chris Wilson +Date: Tue Aug 12 09:00:04 2014 +0100 + + sna: Separate panel checks from adding default modes + + The flags are now separate, so treat them individually. + + Signed-off-by: Chris Wilson + +commit 6554cf0a69f04710b64f3488384fe5cb2748dc35 +Author: Chris Wilson +Date: Mon Aug 11 12:22:17 2014 +0100 + + sna: Parse output options early during initialisation + + Before we can query whether an option is set, we first need to generate + the options table. This is done through xf86OutputUseScreenMonitor() so + make sure it is called as early as possible in the proceedings. + + Signed-off-by: Chris Wilson + +commit 8e1961e7fc163f3103b2260cca965aefa61fed40 +Author: Chris Wilson +Date: Sun Aug 10 06:51:33 2014 +0100 + + sna: Respect monitor option "DefaultModes" + + The is a monitor option to allow the user to specify whether to add the + default modes, use it to determine adding the extra modes for panels. + + Signed-off-by: Chris Wilson + +commit f6e85048b0789162e389ad2b838d417d517d62d9 +Author: Chris Wilson +Date: Sat Aug 9 08:02:39 2014 +0100 + + sna: Reorder output array to match primary placement for InitialConfiguration + + xf86InitialConfiguration() depends upon the order of the outputs for its + mode selection and expects the Primary output to be listed first. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82205 + Signed-off-by: Chris Wilson + +commit 5c7965f00f85fbe3af69029d3fd1e5e2e079f159 +Author: Chris Wilson +Date: Sat Aug 9 07:37:58 2014 +0100 + + intel: If need be, try mounting debugfs + + If we require debugging information from debugfs and we cannot find it, + silently mount it and dump the information we need. + + Signed-off-by: Chris Wilson + +commit dea65e8be73b79c50f7ee59c54c4c75cbcff67fb +Author: Chris Wilson +Date: Sat Aug 9 07:12:23 2014 +0100 + + intel: Log open clients on master takeover fail + + If we fail to claim the DRM device as master, dump /debugfs/.../clients + so that we can check to see who failed to drop master for us. + + Signed-off-by: Chris Wilson + +commit 8d135867c886e98fa0bc5a7a21a1b3d84851daaa +Author: Chris Wilson +Date: Fri Aug 8 14:04:14 2014 +0100 + + sna: Update check for static driver data on loading error + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1354424 + Signed-off-by: Chris Wilson + +commit 59f0374188e6d2eb2fd18e3dfb517087e09ae13f +Author: Chris Wilson +Date: Fri Aug 8 10:26:13 2014 +0100 + + sna: Restore the clear before pwriting the cursor + + Along the legacy phys cursor path, we use a common scratch buffer. As + this is global, we need to be careful not to trust the cursor local + dirty tracking and be sure to clear the image before uploading. + + Reported-by: Dirk Griesbach + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82337 + Signed-off-by: Chris Wilson + +commit afea9ba0790a951c6a00b57d0d71876dd1ce98c3 +Author: Chris Wilson +Date: Fri Aug 8 08:17:15 2014 +0100 + + Prepare for spurious Xv ABI changes + + Signed-off-by: Chris Wilson + +commit 6f69188cb2959abfb2fcd3f81cd4146aa3876bb5 +Author: Chris Wilson +Date: Fri Aug 8 07:25:03 2014 +0100 + + sna: Clear old cursors when resizing + + When changing the stride on a cursor, we have to clear the whole area + and not just the rectangle outside of our overwritten area. + + Reported-by: Jan Alexander Steffens + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82273 + Signed-off-by: Chris Wilson + +commit fab976cef80aad2c573cfc6febeec5ec8e3bab06 +Author: Chris Wilson +Date: Thu Aug 7 14:35:22 2014 +0100 + + uxa: Compile fix for Ubuntu 11.04 + + ../../../src/uxa/intel_uxa.c: In function 'intel_uxa_init': + ../../../src/uxa/intel_uxa.c:1557:27: error: 'true' undeclared (first use in this function) + ../../../src/uxa/intel_uxa.c:1557:27: note: each undeclared identifier is reported only once for each function it appears in + + Signed-off-by: Chris Wilson + +commit 52c1e64692e3e80826e526dd14aec4bee137a19b +Author: Chris Wilson +Date: Thu Aug 7 11:34:26 2014 +0100 + + sna: Flush cursor width changes + + The kernel only sees changes in the cursor width when the cursor handle + is updated. In the cases where we reuse larger bo for smaller cursors, + make sure we then reset the cursor handle (even though it has not + changed) so tht the kernel updates its width. + + Signed-off-by: Chris Wilson + +commit 7763a3da89fac7cbe571535eebd999d178c39e83 +Author: Chris Wilson +Date: Thu Aug 7 07:50:54 2014 +0100 + + test: Exercise different cursor sizes + + Signed-off-by: Chris Wilson + +commit 105d478cdd70ac3b38be51c9014b22b7233c241e +Author: Chris Wilson +Date: Wed Aug 6 09:10:30 2014 +0100 + + sna: Enable kernel rotation support by default + + The kernel API is now upstream and so we can rely on it not changing. + Time to use it. + + Signed-off-by: Chris Wilson + +commit f36b7a4aac86f5874c32d8f516ac1f00a6c8d8b3 +Author: Chris Wilson +Date: Tue Aug 5 16:38:42 2014 +0100 + + intel: Use NOACCEL to avoid a symbol clash on old Xorg + + Old Xorg xf86str.h defines NONE preventing us from using it within an + enum. Use NOACCEL instead. + + Signed-off-by: Chris Wilson + +commit c5e654cf2afcafbe3732548359771747dac1ce26 +Author: Chris Wilson +Date: Tue Aug 5 16:21:19 2014 +0100 + + sna: Set the RandR primary output from the option + + If the user specifies the Option "Primary" for a monitor, we need to set + it as the RandR primary output. + + Signed-off-by: Chris Wilson + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82193 + +commit 999c8dc700a0573859ec1aaae4500493d01d0c0c +Author: Chris Wilson +Date: Tue Aug 5 15:36:26 2014 +0100 + + sna: Add intermediate modes to any output with a scaler + + Signed-off-by: Chris Wilson + +commit cea47f8cfcd810c103740ec7ee9caeecba1e30f4 +Author: Chris Wilson +Date: Tue Aug 5 15:30:11 2014 +0100 + + sna: Add DSI to the list of recognised panel connectors. + + Signed-off-by: Chris Wilson + +commit 941ae4c868279c994756a2a476af2cd32afc6d35 +Author: Chris Wilson +Date: Tue Aug 5 10:19:05 2014 +0100 + + sna: Add some extra logging for hotplugging of outputs + + References: https://bugs.freedesktop.org/show_bug.cgi?id=82153 + Signed-off-by: Chris Wilson + +commit 5926da0ab3339bbfd55a27ac84a8306b8d931181 +Author: Chris Wilson +Date: Mon Aug 4 16:25:36 2014 +0100 + + sna: Mark the current mode as preferred if no other mode is + + Signed-off-by: Chris Wilson + +commit ab3f1526f19ec405dca8ab3094a626096dc30358 +Author: Chris Wilson +Date: Mon Aug 4 16:23:00 2014 +0100 + + sna: Add the current CRTC mode last + + We only want to add the current mode to the modelist if it is not + already present in the EDID. At the moment, we always add the current + mode first which causes the list to be reordered. If we add it after + checking the EDID, then we will not perturb the list. + + Signed-off-by: Chris Wilson + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82068 + +commit ebd1907304c538bcc27614bc8e2e29f317ffb390 +Author: Edward Sheldrake +Date: Mon Aug 4 18:53:38 2014 +0100 + + backlight: Fix regression + + The backlight xrandr property is missing unless the backlight level + was 0 on starting X, regression introduced in + + commit f9e7ac7db7b0331131aa1df3a90d4b2692949efa + Author: Chris Wilson + Date: Wed Jul 23 21:53:31 2014 +0100 + + backlight: Set structure to safe values when not initialised + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82146 + +commit 926631ee4148dbe2c53def01c98d568b80d46d53 +Author: Chris Wilson +Date: Sun Aug 3 18:23:31 2014 +0100 + + sna: Restore single CRTC flips + + CRTC flips depend upon having a proxy front buffer, so + + commit 33a0dd8f0b1e31e501825dc66f7ec2d85b55a7f4 + Author: Chris Wilson + Date: Tue Jul 29 09:11:01 2014 +0100 + + sna/dri2: Also check for stale buffers before exchanges + + was false and disabling every other CRTC flip. However, + + commit 70868c7aa881b15b7478f7ee4543fde0268a4ba6 + Author: Chris Wilson + Date: Wed Jul 23 08:37:46 2014 +0100 + + sna/dri2: Recreate buffer in reuse rather than force recreate + + was not the entire story and to prevent unnecessary confusion when + multiple clients share the same front buffer, we have to force the + recreation of the back. Do this inside the xchg routine to avoid the + confusion first fixed by 70868c7aa881b15b7478f7ee4543fde0268a4ba6. + + Signed-off-by: Chris Wilson + +commit 623fa61090fb288062d68257a5c72d8da1fbfc9c +Author: Chris Wilson +Date: Sun Aug 3 18:08:12 2014 +0100 + + sna: Rearrange showing cursors + + Just tidying and explaining why cursor show on a particular pipe may be + skipped. + + Signed-off-by: Chris Wilson + +commit 0b938573353aab70536d913b2d078181a3c9a1a4 +Author: Chris Wilson +Date: Sun Aug 3 18:08:02 2014 +0100 + + sna: Add some paranoid asserts around get_window_pixmap() + + Signed-off-by: Chris Wilson + +commit 4de3f9bd79d8e42f9767c9fe44d553cfb749ac65 +Author: Chris Wilson +Date: Sun Aug 3 07:33:35 2014 +0100 + + sna: Relax restriction on fenced aperture check + + This is done upfront based on the fenced size within the batch, so we do + not need to assume everything is fenced later on. + + Signed-off-by: Chris Wilson + +commit af60a104acfcc64a63987f93bb77ffa21be1ead1 +Author: Chris Wilson +Date: Sat Aug 2 19:18:29 2014 +0100 + + sna: Restrict fencing to only use the low 256MiB + + Somce early machines have 512MiB apertures, but we can still only use + the low 256MiB for fencing. Separate out the mappable restriction checks + from the fencing in order to further constrain those devices. + + Reported-by: Matti Hämäläinen + Signed-off-by: Chris Wilson + +commit d11512406daeaabf2549831505811725e1375e5e +Author: Chris Wilson +Date: Sat Aug 2 19:08:06 2014 +0100 + + sna: Remove dead assertion + + sna_display.c: In function 'sna_crtc_redisplay': + sna_display.c:6393:9: error: 'sna_crtc' undeclared (first use in this function) + assert(sna_crtc); + + Signed-off-by: Chris Wilson + +commit a1a0b9c2e49d03e373695df8828c8d4c6312e5ac +Author: Chris Wilson +Date: Fri Aug 1 12:02:58 2014 +0100 + + sna/glyphs: Eliminate an extra conditional from glyphs-to-dst + + Signed-off-by: Chris Wilson + +commit fc2de62496061b9d0bace02729765344bd939122 +Author: Chris Wilson +Date: Fri Aug 1 12:00:05 2014 +0100 + + sna/glyphs: Fallback to masked glyphs if rendering to a too wide dst + + Fixes regression from + + commit 79399ff9264ff23da0ab95131a67d2ac85651b3d + Author: Chris Wilson + Date: Mon Mar 24 10:46:57 2014 +0000 + + sna: Eliminate a few conditionals in glyph fast path + + for large pixmaps (such as extended desktops on gen2/gen3). + + Bugzilla: https://bugs.archlinux.org/task/40949 + Signed-off-by: Chris Wilson + +commit ce804875914f52dba5356f8aefec850d411b051a +Author: Chris Wilson +Date: Thu Jul 31 16:18:02 2014 +0100 + + i810: Fix startup after marking GPU screens in the module + + Fixes regression from + + commit d6830190bc9956f485db6c3420f7a4a79793a693 + Author: Chris Wilson + Date: Wed Jul 23 10:53:40 2014 +0100 + + sna: Disable all outputs when initializing as a slaved output provider + + Reported-by: Tobias Powalowski + Signed-off-by: Chris Wilson + +commit a6a60ec606e291323ee0b6e83679ff277a0bd84a +Author: Chris Wilson +Date: Wed Jul 30 07:42:04 2014 +0100 + + sna: Silence a compiler warning + + sna_display.c: In function 'sna_crtc_redisplay': + sna_display.c:6390:19: warning: unused variable 'sna_crtc' [-Wunused-variable] + struct sna_crtc *sna_crtc = to_sna_crtc(crtc); + + Signed-off-by: Chris Wilson + +commit 33a0dd8f0b1e31e501825dc66f7ec2d85b55a7f4 +Author: Chris Wilson +Date: Tue Jul 29 09:11:01 2014 +0100 + + sna/dri2: Also check for stale buffers before exchanges + + Not impossible after all - usually after a client error. + + Signed-off-by: Chris Wilson + +commit 376272be367c2712304a16da0f9362ffae5be0a7 +Author: Chris Wilson +Date: Tue Jul 29 09:02:36 2014 +0100 + + sna: Skip grabbing the main framebuffer id + + If we aren't using it, we can forgo obtaining the id. + + Signed-off-by: Chris Wilson + +commit 4c66ee5e9793785585d37622b9419fd25c046d14 +Author: Chris Wilson +Date: Tue Jul 29 08:59:44 2014 +0100 + + sna: Always clear CRTC overrides when adjusting the mode + + It is not necessary to resize before adjusting the CRTC, but if it + moves the window may no longer be obscuring the CRTC. + + Signed-off-by: Chris Wilson + +commit 7ceb4028f4d69f4ab2e800d6b98809a998918154 +Author: Chris Wilson +Date: Sun Jul 27 17:50:29 2014 +0100 + + sna: Select the panel native size of the unattached fb size + + When creating a framebuffer for an headless system, if there is a panel, + use its native size rather than 1024x768. + + Signed-off-by: Chris Wilson + +commit a88795c64123e4084044451d8861838ea904abd9 +Author: Chris Wilson +Date: Tue Jul 29 21:11:09 2014 +0100 + + sna: Clear cursor image after rotation + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81886 + Signed-off-by: Chris Wilson + +commit 02bb0c5bc56df2790ffcd90d47d667dfd63b5407 +Author: Chris Wilson +Date: Mon Jul 28 21:16:33 2014 +0100 + + sna: Fix clear shortcut for transformations + + The region needs to be transformed along the clear shortcut when + redisplaying the CRTC. + + Reported-by: Dirk Griesbach + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81820 + Signed-off-by: Chris Wilson + +commit 997a5d28021ece0e81845d0217a1b6feb765e6fa +Author: Chris Wilson +Date: Sun Jul 27 07:15:19 2014 +0100 + + configure: Expose no acceleration by default (--with-default-accel=none) + + Why? I am not sure, but it seems equally as valid as allowing the switch + to uxa/glamor as default. The runtime equivalent is Option "AccelMethod". + + Signed-off-by: Chris Wilson + +commit cac1548a9c48db4707fc3c885b1ea568ae2fbc54 +Author: Chris Wilson +Date: Thu Jul 24 06:29:54 2014 +0100 + + sna: Sort the outputs to provide a stable listing order + + Make xrandr look neater by grouping the outputs together by type and + then by port ordering. + + Signed-off-by: Chris Wilson + +commit f68d363a236a4bd424dff8a04d177bb5b79df1c9 +Author: Chris Wilson +Date: Wed Jul 23 22:12:33 2014 +0100 + + backlight: Remove unused 'original' member from structure + + This was accidentally added with no users. + + Signed-off-by: Chris Wilson + +commit 5935c93ce77a5da09aab9b45b1a5710d681c171e +Author: Chris Wilson +Date: Wed Jul 23 21:59:20 2014 +0100 + + sna: Keep the backlight at the same brightness when switching away + + Before VT switching, we disable all the outputs. This has the + side-effect of disabling the backlight, but commonly the console does + not set the backlight brightness itself and so we re-enable the + backlight on its behalf. Rather than set the backlight to max + brightness, reset it to the last user value, as maximum can be very + bright! + + Reported-by: Mark Kettenis + +commit f9e7ac7db7b0331131aa1df3a90d4b2692949efa +Author: Chris Wilson +Date: Wed Jul 23 21:53:31 2014 +0100 + + backlight: Set structure to safe values when not initialised + + Signed-off-by: Chris Wilson + +commit bc50dff844b97e655483c9eaf0effeec6a9ab4dd +Author: Chris Wilson +Date: Wed Jul 23 21:43:02 2014 +0100 + + sna: Disable rendering with the DRM device whilst away from VT + + As root, X gets away with many things, including submitting commands to + the DRM device whilst it is no longer authorised (i.e. when it has + relinquished master to another client across a VT switch). In the + non-root future, if we attempt to use the device whilst unauthorized the + rendering will be lost and we will mark the device as unusable. So flush + our render queue to the device around a VT switch. + + Signed-off-by: Chris Wilson + +commit 8d95e90b7b4bf5d6bae5443f92d77d30f4443f24 +Author: Chris Wilson +Date: Wed Jul 23 15:45:31 2014 +0100 + + 2.99.914 snapshot + +commit 57f0e65d5186412835f282af59141626e4a87a00 +Author: Chris Wilson +Date: Wed Jul 23 16:42:46 2014 +0100 + + sna/dri2: Compile fix for old xorg/dri2 + + We have to do conditional compilation as we touch structure members that + may not exist in older Xserver headers. + + Signed-off-by: Chris Wilson + +commit 4ed0937640b54246440421114b697f75d1b8c835 +Author: Chris Wilson +Date: Wed Jul 23 15:41:29 2014 +0100 + + Add automake magic required for libobj/ + + So libobj/ wasn't included in the tarball, and nor was the compatability + functions being added to the driver when they were needed. The oddity is + that using the ./configure script (and thus make distcheck) succeeds. It + was only when 'autoreconf -fi' was run was the first error encoutered. + + Signed-off-by: Chris Wilson + Reported-by: Tobias Klausmann + +commit dcf9ce4a9f16c01f58797e4f899d51e23506aa6c +Author: Chris Wilson +Date: Wed Jul 23 14:19:44 2014 +0000 + + Fix compile failure on old Xorg with XF86_ALLOCATE_GPU_SCREEN + + Sigh, a late fix was not compile checked against xorg-1.7. + + Signed-off-by: Chris Wilson + +commit 1c5e20716f192f0c38b4edd879d28e11126f7f01 +Author: Chris Wilson +Date: Sat Jul 5 08:47:16 2014 +0100 + + 2.99.913 snapshot + +commit d242965979cf251383a6230dbd65cdc1d9e231ea +Author: Chris Wilson +Date: Wed Jul 23 14:25:25 2014 +0100 + + sna: Skip performing an async flip after fixup + + After the first async failure and we fix up the CRTC, ordinary we queue + a no-op flip in order to queue the event. For async flips, we do not + want that event so just skip the flip. + + Signed-off-by: Chris Wilson + +commit 4153d4b43004cd90c0d9a7a7db399dac4d30721e +Author: Chris Wilson +Date: Wed Jul 23 13:54:19 2014 +0100 + + sna/dri2: Tidy freeing the queued frame events + + Signed-off-by: Chris Wilson + +commit f2b2b6eda009924e5ec6974bb31be9d3749c9cf8 +Author: Chris Wilson +Date: Wed Jul 23 13:45:27 2014 +0100 + + test/dri2: Use the right device node + + Use the device node as instructed by Xorg. + + Signed-off-by: Chris Wilson + +commit 65c2376730e86d7502d8c47d49386be5f51e47ba +Author: Chris Wilson +Date: Wed Jul 23 12:12:03 2014 +0100 + + sna: Add a DBG message for slave damage propagation + + Signed-off-by: Chris Wilson + +commit 95c059b330e705ecd0e575e98d8edf5707e84a05 +Author: Chris Wilson +Date: Wed Jul 23 11:01:07 2014 +0100 + + sna: Reorder disabling scanout pixmap when updating slave + + The assertion caught that we would unregister an invalid drawable on + older Xorg. + + Signed-off-by: Chris Wilson + +commit d6830190bc9956f485db6c3420f7a4a79793a693 +Author: Chris Wilson +Date: Wed Jul 23 10:53:40 2014 +0100 + + sna: Disable all outputs when initializing as a slaved output provider + + When we are constructed as a slaved device, we need to disable all + outputs or else they are not correctly hooked into the master device + upon startup. + + Signed-off-by: Chris Wilson + +commit 70868c7aa881b15b7478f7ee4543fde0268a4ba6 +Author: Chris Wilson +Date: Wed Jul 23 08:37:46 2014 +0100 + + sna/dri2: Recreate buffer in reuse rather than force recreate + + By marking the buffer->attachment as invalid we forced the recreation of + the buffer on the next DRI2GetBuffers. The only small problem with that + was that the client didn't always immediately call DRI2GetBuffers after + the invalidation - and if they did a DRI2CopyRegion with its stale + buffers the unfound attachment would generate a BadValue and kill the + client. So instead of messing around with the attachment, explicitly + recreate the buffer if we attempt to reuse a buffer of the wrong size. + + Signed-off-by: Chris Wilson + +commit aa5351dbbe0a50080efee35a3d494b3a20b7c9f6 +Author: Chris Wilson +Date: Tue Jul 22 09:40:14 2014 +0100 + + sna: Ensure errno is set after failure before reporting a modeset failure + + A few paths we report a sanity check failure which do not set errno, but + we then print out the errno as part of our message to the user. Set it + to a sane value in those cases. + + Signed-off-by: Chris Wilson + +commit feba651db8dd61356fb6296b55d46168bd4d7011 +Author: Chris Wilson +Date: Tue Jul 22 09:15:01 2014 +0100 + + sna: Remove %# from DBG messages + + LogF doesn't support the 0x-prefix instruction. + + Signed-off-by: Chris Wilson + +commit 13e20c7f61d8b21b33c02d8b737cf9c06bf50f17 +Author: Chris Wilson +Date: Tue Jul 22 08:52:10 2014 +0100 + + sna: Assert that we do not overwrite an earlier COW entry + + Signed-off-by: Chris Wilson + +commit d8b0a8fa033848543e0b39566b531fdfdd078087 +Author: Chris Wilson +Date: Tue Jul 22 08:48:58 2014 +0100 + + sna/dri3: Don't forget to add SHM pixmaps to the list of exported DRI3 bo + + Signed-off-by: Chris Wilson + +commit bfccacf745d054756661be3edd8898ac6aceb878 +Author: Chris Wilson +Date: Sun Jul 20 07:29:21 2014 +0100 + + sna/video: Bump the maximum size for sprites + + A sprite plane is limited by the display engine who's maximum resolution + has increased since the 2kx2k limitations of 8xx, so let's set it + correctly to the reported maximum CRTC size (since we have no individual + query for maximum sprite plane sizes). + + Signed-off-by: Chris Wilson + +commit 9bb2818a7db1c9dc89379996415511b6cff4bb33 +Author: Chris Wilson +Date: Sun Jul 20 07:27:58 2014 +0100 + + dri3-test: Print line number for shm failures + + Signed-off-by: Chris Wilson + +commit 4ae346e7647fd2c01324f1a6d3b37674e858486d +Author: Chris Wilson +Date: Fri Jul 18 07:31:25 2014 +0100 + + configure: Double check xinerama's headers + + Having the pkgconfig present doesn't always necessarily imply the + headers are installed correctly - just fail over gracefully for xinerama + and intel-virtual-output + + Signed-off-by: Chris Wilson + +commit fac6845820e49dbbea2a625b7bb745d8f9159b56 +Author: Chris Wilson +Date: Fri Jul 18 07:14:19 2014 +0100 + + sna/dri2: Protect compsiteext.h include with build check + + We shouldn't include calls to the composite extension if it has not been + built. + + Reported-by: Ben Widawsky + Signed-off-by: Chris Wilson + +commit 923e098f5f830c30b93d6f85d4f812201bdcb206 +Author: Chris Wilson +Date: Thu Jul 17 17:10:39 2014 +0100 + + sna: Fix compilation with older Xorg + + sna_display.c: In function 'sna_crtc_disable_shadow': + sna_display.c:1375:39: error: dereferencing pointer to incomplete type + DamageUnregister(&crtc->slave_damage->drawable, crtc->slave_damage); + + Signed-off-by: Chris Wilson + +commit 7026ffe56005bbc36dc37cafc7ebb2a7f09fefdd +Author: Chris Wilson +Date: Thu Jul 17 17:04:02 2014 +0100 + + sna: Support TearFree on slaved outputs + + By always forcing the shadow intermediatory, we can enable TearFree even + ona slave scanout. + + Signed-off-by: Chris Wilson + +commit 3140d72826b5227f7f7ac9a428faa4bcfd4b377b +Author: Chris Wilson +Date: Thu Jul 17 16:14:16 2014 +0100 + + backlight: Prevent dereference of potential NULL argv + + Adam Sampson spotted that + + "It's possible (but not very sensible) to exec a program with an empty + argument list, so argv[0] is not necessarily a valid pointer. For + example: + + $ cat exec0.c + + int main(int argc, char *argv[]) { + char *empty[1] = { NULL }; + execvp(argv[1], empty); + perror("execvp"); + return 1; + } + $ ./exec0 /usr/libexec/xf86-video-intel-backlight-helper + Usage: (null) + " + + He sensibly suggested that we hardcode the program name to avoid the + NULL dereference. Being the paranoid type, we should also be careful not + to write to any file descriptors outside of our control (i.e. stderr), + so disable the messages unless we are debugging. + + Reported-by: Adam Sampson + Signed-off-by: Chris Wilson + +commit bcd09ff6eb76bc4df046ece4da29b1455fed8dff +Author: Chris Wilson +Date: Thu Jul 17 15:23:46 2014 +0100 + + sna: Assert that we never attempt to flip the slave scanout + + Signed-off-by: Chris Wilson + +commit 129656e4a82d4bf799e5c1d75d0dcb4480f6eb09 +Author: Chris Wilson +Date: Thu Jul 17 15:01:06 2014 +0100 + + sna/dri2: Disable SwapLimit buffers with buggy prime implementations + + If there is a GPU screen, we have to assume that the DRI2 code may pass + around the wrong pointers to ReuseBufferNotify until the fix is + released: + + commit 4d92fab39c4225e89f2d157a1f559cb0618a6eaa + Author: Chris Wilson + Date: Wed Jun 18 11:14:43 2014 +0100 + + dri2: Use the PrimeScreen when creating/reusing buffers + + Signed-off-by: Chris Wilson + +commit a45b2ea11c15f35c36330ff27cb45854a29c2e2c +Author: Chris Wilson +Date: Thu Jul 17 14:40:51 2014 +0100 + + sna: Handle rotated slaved scanouts + + As per the usual handling of rotated scanouts with unsupported + rotations, we stage the drawing onto a backbuffer then rotate onto the + crtc later. The difference here is that we must read the contents from + the master pixmap rather than our own screen pixmap. + + Spotted was looking at slaved scanouts mistakenly setting the CRTC + transformed flag. + + Reported-by: Tomas Pruzina + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81383 + Signed-off-by: Chris Wilson + +commit 339c9dd0d5206180995731ab22304776e544f2f7 +Author: Chris Wilson +Date: Thu Jul 17 12:54:47 2014 +0100 + + sna: Add missing DBG parameters + + Signed-off-by: Chris Wilson + +commit 62f62f70eda97a3ef18c5144031fdf1cb2b7dad0 +Author: Chris Wilson +Date: Thu Jul 17 10:06:06 2014 +0100 + + sna: Avoid confusing failure to flip and flipping zero CRTC + + During the present unflip path we blindly try to restore the original + mode after a flip failure. However, it confuses flipping zero CRTC with + a genuine failure. This has the result of undoing a DPMS change (e.g. + xset dpms force dpms) under a DRI3 compositor. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81456 + Signed-off-by: Chris Wilson + +commit 95f08c171ebd9b594112ab006c4460702a22bec1 +Author: Chris Wilson +Date: Thu Jul 17 09:20:35 2014 +0100 + + sna: Busy-wait for the kernel to catch up when flipping + + If the kernel reports that it is busy, it has not yet finished + processing a pending flip and we have multiple CRTC queued, just wait + for the kernel to clear its backlog before submitting the next flip. On + the other hand, if we can just overwrite the pending flip results. + However, the EBUSY may actually be a genuine report by the kernel of an + error, so check for an invalid CRTC first. + + Signed-off-by: Chris Wilson + +commit 0a9d3dd8c83749992e643675f16486092f2b00fa +Author: Chris Wilson +Date: Thu Jul 17 08:53:13 2014 +0100 + + sna: Silence valgrind when reading plane properties + + Signed-off-by: Chris Wilson + +commit 0a57b55f0fcfa93b38015535002cb11eeaf1dd3a +Author: Chris Wilson +Date: Thu Jul 17 08:32:14 2014 +0100 + + sna: Remove extraneous function wrapping + + Since we only have the single callsite for do_page_flip, the wrapper is + not adding any meaningful information. + + Signed-off-by: Chris Wilson + +commit f33d44f41ef0f287375b7a6b1c117abff5a23b19 +Author: Chris Wilson +Date: Wed Jul 16 12:53:02 2014 +0100 + + sna: And remove new bogus assertion + + We assert that damage is valid as we delete the Pixmap, and so we cannot + assert that the Pixmap is still valid itself. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit dd9df24eb5234c96e499063904ab7bd85a332fd8 +Author: Chris Wilson +Date: Wed Jul 16 08:05:34 2014 +0100 + + sna: Make the damage check more verbose + + Print out the pixmap number and the damage extents for when the + assertion fails. + + Signed-off-by: Chris Wilson + +commit 34ada63118680bf8ad2ef737fd4a8edfd8246e37 +Author: Chris Wilson +Date: Wed Jul 16 07:19:03 2014 +0100 + + sna/gen2+: Remove assertion on draw->type for fills + + I overlooked the tiling-fill path passing down a temporary DrawableRec + into the fill_boxes callback - invalidating the assertion. + + Fixes regression from + commit 43176b9bfafe389c4b9ed676f4e50e3b06f858c4 + Author: Chris Wilson + Date: Mon Jun 30 21:01:11 2014 +0100 + + sna/dri2: Pass around the correct DrawableRec for sampling from the foriegn bo + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c62 + Signed-off-by: Chris Wilson + +commit 4422b1854209a2cdf023c1fbc60834fde2fbc0c7 +Author: Chris Wilson +Date: Fri Jul 11 22:23:55 2014 +0100 + + sna: Use a stricter test for determining CRTC off before updating the cursor + + Signed-off-by: Chris Wilson + +commit e0523ade28fa0da00d0bd70d8b22d53ed4e49f73 +Author: Chris Wilson +Date: Wed Jul 9 12:10:15 2014 +0100 + + sna: Reduce reflections onto rotations + + In order to support a wider range of rotation/reflections, perform a + simple reduction of the requested rotation first. + + Signed-off-by: Chris Wilson + +commit 251bcc32eed37ee10eb14ce2278ecbdcc40a7cde +Author: Chris Wilson +Date: Thu Jul 10 21:01:57 2014 +0100 + + configure: Provide a poor man's replacement for getline() + + uClibc is one such library that doesn't implement getline() + + Reported-by: Ben Widawsky + Signed-off-by: Chris Wilson + +commit 8587b2fff218537c6ff568ac3ef561f0d39f03ff +Author: Chris Wilson +Date: Tue Jul 8 11:53:13 2014 +0100 + + sna: Rewrite rotation setup on top of universal drm planes + + The kernel interface has changed slightly since the early proposals. Now + the rotation property is only on the plane and so we have to lookup the + primary prime as well. + + Signed-off-by: Chris Wilson + +commit f24a9d335273fec20679397abcc3d5405d9613df +Author: Chris Wilson +Date: Sat Jul 5 14:40:38 2014 +0100 + + sna: Fix a couple of DBG messages + + Signed-off-by: Chris Wilson + +commit 790e7492bdb5c0c77c53ae769f0d408b04d5c99b +Author: Chris Wilson +Date: Sat Jul 5 09:46:00 2014 +0100 + + test/lowlevel-blt-bench: Add common PDF operators + + Applications are starting to use PDF operators, so far I have spotted + multiply, dodge and lighten. + + Signed-off-by: Chris Wilson + +commit 8fa22964f69d3ec8700f177dd7cb3cbc396a9f35 +Author: Matthieu Herrb +Date: Fri Jul 4 18:26:09 2014 +0200 + + backlight: Fix security issues in handling of the interface path name. + + - don't allow '/' in the interface name to avoid escaping the /sys + hierarchy + - check snprintf() return value for overflow. + + Problems reported by Adam Sampson. Thanks. + + Signed-off-by: Matthieu Herrb + Reviewed-by: Reviewed-by: Hans de Goede + +commit 6a64a3ae55ad5f743d2b7a4852b6ca7b54d2a142 +Author: Chris Wilson +Date: Fri Jul 4 13:04:02 2014 +0100 + + sna: Discard operations to either CPU or GPU bo when overwriting with RenderRectangles + + Signed-off-by: Chris Wilson + +commit 2c8ab77fcd71b7f96ad7bc379e5c68b3b45a5069 +Author: Chris Wilson +Date: Fri Jul 4 12:43:55 2014 +0100 + + sna: Tweak number of threads for short areas + + Signed-off-by: Chris Wilson + +commit d3ccb3f3b2a3cb4c8b51d58d185dd10b85e025eb +Author: Chris Wilson +Date: Fri Jul 4 12:39:01 2014 +0100 + + sna: Convert a clear tile into a solid fill + + Signed-off-by: Chris Wilson + +commit 2e0763088f8e159b414cec5c056cc4c91a34766e +Author: Chris Wilson +Date: Fri Jul 4 12:26:43 2014 +0100 + + sna: Fix typo s/num_threads/max_threads/ + + Signed-off-by: Chris Wilson + +commit 04ddea075e9e07cf3158594130d5ba7d1f50f7f1 +Author: Chris Wilson +Date: Fri Jul 4 12:14:11 2014 +0100 + + sna: Do a quirk early check for short areas before threading + + Signed-off-by: Chris Wilson + +commit 228a22fe8db044a18556a9fdb989323274817771 +Author: Chris Wilson +Date: Fri Jul 4 12:10:10 2014 +0100 + + sna: Disable use of threaded compositor when using threaded renderer + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 64bcb91f58fba3956f2c66fa37707b9e496da936 +Author: Chris Wilson +Date: Fri Jul 4 11:02:39 2014 +0100 + + sna: Utilise existing cached upload for promoting to GPU bo + + If we already have a buffer that represents the data on the GPU, we can + simply use that when we need to promote the pixmap onto the GPU. + + Signed-off-by: Chris Wilson + +commit 821ef20b27f84cc26aec266b0f616a7f39ba9e3d +Author: Chris Wilson +Date: Fri Jul 4 10:43:35 2014 +0100 + + sna: Promote tile pixmaps to GPU when reused + + Signed-off-by: Chris Wilson + +commit c6407f7380829f822a462100d26bc531aed0fd6f +Author: Chris Wilson +Date: Fri Jul 4 10:14:54 2014 +0100 + + sna/gen8: Disable the unaligned check + + Note sure if this is strictly required -- but at the moment it fails for + 1x1R solids, causing us to skip glyphs. The simulator doesn't complain, + so just skip the check for now. + + Reported-by: Ben Widawsky + Signed-off-by: Chris Wilson + +commit e64d14d7bc72fe7b150e5427feeb1a163ec600a7 +Author: Chris Wilson +Date: Fri Jul 4 09:55:04 2014 +0100 + + sna: Tighten assertions for using upload proxies concurrently with CPU reads + + After relaxing some of the rules on when to discard the upload proxies, + we also need to relax some of the complementary asserts. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 4e12d5ca26bdfafd7b9cd02c36e6d991f068f29b +Author: Chris Wilson +Date: Fri Jul 4 09:48:53 2014 +0100 + + sna: Prevent creating a GPU bo for an inplace read + + Signed-off-by: Chris Wilson + +commit 18ae7722dbdf6ab61560962ed6ca8d39f353b1f9 +Author: Chris Wilson +Date: Thu Jul 3 18:18:04 2014 +0000 + + sna: Wrap xf86DPMSSet + + We need to wrap xf86DPMSSet() so that we can reintialize our bookkeeping + and auxiliary planes after disabling/re-enabling CRTC during DPMS + operations. + + Signed-off-by: Chris Wilson + +commit 57d0cc82d851b95d4e3b1821287dd3ffd1cf6e3b +Author: Chris Wilson +Date: Thu Jul 3 09:07:44 2014 +0100 + + sna: Clear the cursor reference from the CRTC if the update fails + + This should allow it to be restored correctly the next time it gets + shown. + + Signed-off-by: Chris Wilson + +commit 24c9bac7eb6e17b55044d719bab74d16fd68c450 +Author: Chris Wilson +Date: Wed Jul 2 21:17:54 2014 +0100 + + sna: Limit the size of the tiling object to be smaller than either the originals + + When we tile, we do so in order to fit an operation involving two + objects larger than the aperture. If we then choose an intermediate + tiling object that is larger than either of those two, the error will + persist and we will be forced to recuse. + + In the worst case, this will provide an upper bound to the recursion. + + Reported-by: Bruno Prémont + Signed-off-by: Chris Wilson + +commit 710bb0d37c681f2ffdeaf263b6ee7d9488670bc0 +Author: Chris Wilson +Date: Wed Jul 2 09:16:07 2014 +0000 + + test: Create separate SHM segments for ref/out + + Signed-off-by: Chris Wilson + +commit 87e659b887f4c738cfc91439efdac0d48fd294f0 +Author: Chris Wilson +Date: Wed Jul 2 10:47:32 2014 +0000 + + sna: Use the threaded compositor for picture conversions + + Signed-off-by: Chris Wilson + +commit 2bf36d54ebdfa2a59bf7ef71134b953628ae5d50 +Author: Chris Wilson +Date: Wed Jul 2 11:31:54 2014 +0100 + + sna/gen6+: Tweak consideration of compositing on BLT + + Signed-off-by: Chris Wilson + +commit 732cd11cf0ca813fdc06f9f09fab120ea4e3a7da +Author: Chris Wilson +Date: Tue Jul 1 17:54:49 2014 +0100 + + sna: Fix typo in LinearFramebuffer handling + + Eeek, when not using LinearFramebuffer we still want to create the GPU + bo: s/,/;/ + + Reported-by: Ilia Mirkin + Signed-off-by: Chris Wilson + +commit b5fa463b90c49ebc635d79b1561c94a4857e9cf6 +Author: Chris Wilson +Date: Tue Jul 1 17:53:56 2014 +0100 + + sna: Correct migration flags for initial scanout creation + + We want to preserve any contents preloaded (not that there should be + any...) + + Signed-off-by: Chris Wilson + +commit b88866aa5ebf813a999e194dec24e9ef2ac4f59d +Author: Chris Wilson +Date: Tue Jul 1 16:59:31 2014 +0100 + + sna/dri2: Add a DBG option to select copy method + + Often when debugging it is useful to force either use of the BLT or 3D + pipelines for copies. + + Signed-off-by: Chris Wilson + +commit a10781b70f222f3997928fa979f6292617f79316 +Author: Chris Wilson +Date: Tue Jul 1 15:11:07 2014 +0100 + + sna: Enforce LinearFramebuffer option + + This option should only be used for compatibility. Previously this was + done at a high level, this changes it to enforce the tiling as we apply + the CRTC. + + Signed-off-by: Chris Wilson + +commit 75745cd5861481c5a9a31125d357f339349dd0f8 +Author: Chris Wilson +Date: Tue Jul 1 14:31:32 2014 +0100 + + sna/dri2: Use CPU fallback if possible + + Signed-off-by: Chris Wilson + +commit 02715490db13dcd47c5e4bef713f400838d94b99 +Author: Chris Wilson +Date: Tue Jul 1 13:10:32 2014 +0100 + + sna/dri2: Set depth/bpp on scratch DrawableRec + + We need to initialise both depth and bitsPerPixel on the drawable struct + we pass around as they are used for selecting for the format when + copying. + + Reported-by: Vedran Rodic + Signed-off-by: Chris Wilson + +commit e6e5330857097eb2caafa89d571d12e4bb15f539 +Author: Damien Lespiau +Date: Mon Jun 30 19:24:13 2014 +0100 + + intel: Use the i845 info structure for INTEL_I845G_IDS() + + I assume the intention was to provide a different structure for each of + the gen 2 devices. + + This doesn't change anything really. + + Signed-off-by: Damien Lespiau + +commit e1c3e6ce79c73d12c814cfda76dbc0df184902ee +Author: Chris Wilson +Date: Mon Jun 30 19:56:39 2014 +0100 + + sna: Add DBG breadcrumbs before flushes in BLT + + Signed-off-by: Chris Wilson + +commit 43176b9bfafe389c4b9ed676f4e50e3b06f858c4 +Author: Chris Wilson +Date: Mon Jun 30 21:01:11 2014 +0100 + + sna/dri2: Pass around the correct DrawableRec for sampling from the foriegn bo + + One day, we will move the width/height/bpp to the bo itself... + + Reported-by: Ilia Mirkin + Signed-off-by: Chris Wilson + +commit 6c3399715e316be970c696b8949e3c14e83ea5df +Author: Chris Wilson +Date: Mon Jun 30 16:32:45 2014 +0100 + + sna/dri2: Apply the paraniod buffer clip in the correct coordinate system + + We need to only clip to the extents of the copy in the buffer space - + which implies that we need to translate the region into that space before + doing the clip. + + Reported-by: Ilia Mirkin + Signed-off-by: Chris Wilson + +commit c25fa2216a3674f564a7e35d263a5d405aa97816 +Author: Chris Wilson +Date: Mon Jun 30 14:13:13 2014 +0100 + + sna: Tweak preference for small GPU bo + + Signed-off-by: Chris Wilson + +commit 19a62e088f5202026bdfde7a8af36598b69f8243 +Author: Chris Wilson +Date: Mon Jun 30 11:20:54 2014 +0100 + + test/lowlevel-blt-bench: Update progress more frequently + + Signed-off-by: Chris Wilson + +commit fab3bc70a450d94104c96ddbe7fa6e6ace1bb8f8 +Author: Chris Wilson +Date: Mon Jun 30 11:05:33 2014 +0100 + + sna: Reduce assertion when using asynchronous CPU access + + If we are not actually accessing the memory through the pointer, we do + not care if it not currently coherent. + + Signed-off-by: Chris Wilson + +commit ffe8bd4d6e296a0ded0e118aee05aa6cb3051c56 +Author: Chris Wilson +Date: Mon Jun 30 10:55:20 2014 +0100 + + sna: Silence snarky compliers + + 0 != (void *)0 + + Signed-off-by: Chris Wilson + +commit 05f6183075867d582b7f9f74aec42e632e3d83dd +Author: Chris Wilson +Date: Mon Jun 30 10:46:00 2014 +0100 + + sna: Mollify assert to be consistent with the scanout flush + + Signed-off-by: Chris Wilson + +commit 2e0000688d034535083950b98bc61745dd965352 +Author: Chris Wilson +Date: Mon Jun 30 08:44:33 2014 +0100 + + test/lowlevel-blt-bench: Exercise masks + + Signed-off-by: Chris Wilson + +commit 37ac34c4e4500bfc272222754949edc1dbb8c7e2 +Author: Chris Wilson +Date: Mon Jun 30 08:44:33 2014 +0100 + + test/lowlevel-blt-bench: Exercise SHM pixmaps + + Signed-off-by: Chris Wilson + +commit 901d889dd7397dfa4c291f96af657e4b3433d795 +Author: Chris Wilson +Date: Mon Jun 30 07:44:25 2014 +0100 + + intel-virtual-output: Remove one redundant cleanup on error + + Signed-off-by: Chris Wilson + +commit a8b0ba0ed5f27e0d671b650d6f4bfe2fd86a0f3f +Author: Chris Wilson +Date: Sun Jun 29 15:25:19 2014 +0100 + + intel-virtual-output: Cleanup singleton on failure + + Signed-off-by: Chris Wilson + +commit 81889664851e3a2218d1ac5d39ebd2bd3b6a4954 +Author: Chris Wilson +Date: Sun Jun 29 08:29:36 2014 +0100 + + intel-virtual-output: Convert debugging messages to verbosity + + Original patch by main.haarp: + "A verbose switch is quite useful for debugging, it shouldn't require + editing and recompilation to gain more useful output. I added it." + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80664 + Signed-off-by: Chris Wilson + +commit 665d012b8e1b9666e535a3081404406f31b8a3ef +Author: Chris Wilson +Date: Sun Jun 29 09:26:10 2014 +0100 + + sna: Ensure CPU bo is synchronized before writing + + Signed-off-by: Chris Wilson + +commit 6b906ae742ec96eeef403191d3cdded6a23a70b7 +Author: Chris Wilson +Date: Sun Jun 29 07:02:44 2014 +0100 + + sna: Update allocation of CPU bo to avoid creating active buffers + + Since we now prefer CPU detiling, exactly when we want active/inactive + buffers is a little more complex - and we also need to take into account + when we want to use the CPU bo as a render target. + + Signed-off-by: Chris Wilson + +commit b961d7323369284ea2c3db47d30c27ffe01a9040 +Author: Chris Wilson +Date: Sun Jun 29 07:00:58 2014 +0100 + + sna: Sync CPU bo before writes + + Fixes regression from + + commit 961139f5878572ebea268a0bbf47caf05af9093f [2.99.912] + Author: Chris Wilson + Date: Fri May 30 09:45:15 2014 +0100 + + sna: Use manual detiling for downloads + + Reported-by: Harald Judt + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80560 + Signed-off-by: Chris Wilson + +commit 53ef9e762a6e7802b3d5f8fba9ac17ff95545c10 +Author: Chris Wilson +Date: Sat Jun 28 21:07:08 2014 +0100 + + sna: Only preferentially upload through the GTT for large transfers + + Signed-off-by: Chris Wilson + +commit 0955f12ae04011593b71817e3151b8fb7c228899 +Author: Chris Wilson +Date: Sat Jun 28 17:38:54 2014 +0100 + + sna: Prefer linear if below tile_width + + Be stricter in order to allow greater use of CPU bo. + + Signed-off-by: Chris Wilson + +commit 3ef966f4c5bae07108ce2720f4da3c3c4e41e1aa +Author: Chris Wilson +Date: Sat Jun 28 14:23:29 2014 +0100 + + sna/io: Prefer CPU copies on LLC + + Signed-off-by: Chris Wilson + +commit 9fc052da5c4246402d2707b3a91efffa7dd81e08 +Author: Chris Wilson +Date: Sat Jun 28 14:22:17 2014 +0100 + + sna: Don't discard damage for SHM pixmaps + + We don't really want to rendering into SHM pixmaps except for copying + back due to the strict serialisation requirements. + + Signed-off-by: Chris Wilson + +commit 0f8b39d24ff15cf3373ac7293f12772ebe16b68b +Author: Chris Wilson +Date: Sat Jun 28 14:21:36 2014 +0100 + + sna: Check for a mappable GPU bo before migrating damage + + Signed-off-by: Chris Wilson + +commit cfdaee4a7e45689b0fbbc8c3166d28d69797e759 +Author: Chris Wilson +Date: Sat Jun 28 14:20:00 2014 +0100 + + sna: Skip adding damage if it is already contained + + Signed-off-by: Chris Wilson + +commit 80752fb2794faa581d891b24148eaf51c42afd25 +Author: Chris Wilson +Date: Sat Jun 28 14:19:22 2014 +0100 + + sna: Tidy calling memcpy_from_tiled + + Signed-off-by: Chris Wilson + +commit 2a0176379f0ff290d276adc72d44dfddafd96da5 +Author: Chris Wilson +Date: Sat Jun 28 14:18:23 2014 +0100 + + sna: Micro-optimise unswizzling tiling/detiling + + Signed-off-by: Chris Wilson + +commit 24cb50e53c789cb7a05d59ad103dda1c3a009485 +Author: Chris Wilson +Date: Sat Jun 28 07:05:55 2014 +0100 + + sna/trapezoids: Handle mono traps just in case + + I disabled a few paths and ended up in an assert that mono trapezoids + shouldn't get that far... + + Signed-off-by: Chris Wilson + +commit 72c041e57b99367f327c51c50fce2a55d618fc63 +Author: Chris Wilson +Date: Fri Jun 27 16:26:24 2014 +0100 + + uxa: Update Screen Pixmap width/height first + + Since commit dd6db82680b05cde4a47116b7096c054f3837e20 [2.99.912] + Author: Chris Wilson + Date: Fri May 9 20:26:19 2014 +0100 + + uxa: Add DRI3 and miSyncShm support + + we verify that the attaching bo meets the constraints required for the + Pixmap. However, when updating the ScreenPixmap following a resize, we + did not update the Pixmap size until after we tried to update the bo, + resulting in a validation failure when shrinking the screen. + + Signed-off-by: Chris Wilson + +commit 0584604b53c8676adfa1f8f4d3def22c93ea822f +Author: Chris Wilson +Date: Fri Jun 27 16:12:35 2014 +0100 + + test: Expand number of sources for basic benchmarking + + Signed-off-by: Chris Wilson + +commit edd2b789568b14c29a004a64b6ff82bb6e4e9620 +Author: Chris Wilson +Date: Fri Jun 27 16:00:03 2014 +0100 + + sna/dri2: DBG compile fixes + + Signed-off-by: Chris Wilson + +commit a6ba93283b20a50ff36758624d2967562b7bdae9 +Author: Chris Wilson +Date: Fri Jun 27 13:42:37 2014 +0100 + + sna/glyphs: Add DBG option for glyph tolerance + + And bump it to 3 so that glyph filtering doesn't force us to use the + mask too often. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit ee5c74deee77db4292ce197ab7facca422f86021 +Author: Chris Wilson +Date: Fri Jun 27 12:56:43 2014 +0100 + + sna/glyphs: Add DBG option for forcing glyphs-to-dst + + Signed-off-by: Chris Wilson + +commit 6ba4ee1fe842e975c94a01f93c6d39c20eadadbe +Author: Chris Wilson +Date: Fri Jun 27 10:38:59 2014 +0100 + + sna: Check source bo is suitable for BLT before doing so + + Signed-off-by: Chris Wilson + +commit 157e22cb8e96b0a9ffa7d58625fe2396f6084ff9 +Author: Chris Wilson +Date: Thu Jun 26 20:19:52 2014 +0100 + + sna: Only reuse pinned batches for 830/845 + + Trying to fly too close to the sun. :( + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80558 + Signed-off-by: Chris Wilson + +commit f027b4f628b6d0f4c00f8aba7b27dcf51f91211d +Author: Chris Wilson +Date: Thu Jun 26 20:24:05 2014 +0100 + + sna/dri2: Slightly improved DBG messages + + Missing git add from + + commit 2e8c09f3fe468abba9c307ba3d7b2d22908e1172 + Author: Chris Wilson + Date: Wed Jun 25 22:19:23 2014 +0100 + + sna/dri2: Hook into ClientGone callback to clear dangling references + + Signed-off-by: Chris Wilson + +commit 2ae5d7d9415a77c76078bc340066df73dce72d27 +Author: Chris Wilson +Date: Thu Jun 26 20:21:12 2014 +0100 + + sna: Tidy selection of a near-miss active buffer. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80560 + Signed-off-by: Chris Wilson + +commit 8cad98eca64224534887efbcd1c60604cd491c35 +Author: Chris Wilson +Date: Thu Jun 26 12:42:30 2014 +0100 + + sna: Fix userptr defines to match i915_drm.h + + Now that we are starting to see userptr in the headers, we see that the + definitions slightly changed. + + Signed-off-by: Chris Wilson + +commit c5c7dd24a55f04322d5eec10dc4352d8a8e92b1e +Author: Chris Wilson +Date: Thu Jun 26 09:25:06 2014 +0100 + + sna: Remove scare quotes from hotplug detection "enabled" + + Tidy up the log message by improving its formatting, and making it more + accurate. + + Signed-off-by: Chris Wilson + +commit 2e8c09f3fe468abba9c307ba3d7b2d22908e1172 +Author: Chris Wilson +Date: Wed Jun 25 22:19:23 2014 +0100 + + sna/dri2: Hook into ClientGone callback to clear dangling references + + As the Window may exist for multiple Clients, we cannot rely on the + destruction of the Window decoupling all outstanding events and + preventing chasing a stale Client pointer. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80157 + Signed-off-by: Chris Wilson + +commit 12a349974b63a47ad55384abe0d7a839af48f31a +Author: Chris Wilson +Date: Thu Jun 26 06:59:07 2014 +0100 + + sna: Make output destroy more defensive + + We may never create the properties as it may be ignored or the + allocation may fail, so we need to be careful when freeing we do not + stumble over invalid pointers. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80355#c28 + Signed-off-by: Chris Wilson + +commit 2ec2164ba4bd3a266949cdb379b6da1090475c08 +Author: Chris Wilson +Date: Wed Jun 25 18:05:46 2014 +0100 + + sna/dri2: Compile fixes for ancient Xorg + + Signed-off-by: Chris Wilson + +commit 258f8983daa3a8fe315c440f5e298ae1b02fd678 +Author: Chris Wilson +Date: Wed Jun 25 17:20:52 2014 +0100 + + sna: Fix uninitialisable variable + + sna_render.c: In function 'sna_render_picture_downsample': + sna_render.c:822: warning: 'priv' may be used uninitialized in this function + + introduced in + + commit ded05e8abb248664124d2b86f77c27497a252c4e + Author: Chris Wilson + Date: Mon Jun 23 22:15:56 2014 +0100 + + sna: Allow scratch pixmap to allocate linear GPU bo + + Signed-off-by: Chris Wilson + +commit ca0d06add926eb17fcec6c031adabb656498d744 +Author: Chris Wilson +Date: Wed Jun 25 14:19:33 2014 +0100 + + sna: Improve throttling during bo allocation + + By controlling how long we may block during buffer allocation, we can + relax the throttle elsewhere to prevent render lag buildup. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit 5ad1661b870b5b189e52383e45a9b8f570b40501 +Author: Chris Wilson +Date: Wed Jun 25 13:21:58 2014 +0100 + + sna: Only mark throttle as done after success + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit c3e4518e84300aeb8e12a0af56c2d66a1df9d8d7 +Author: Chris Wilson +Date: Wed Jun 25 11:18:01 2014 +0100 + + sna: Track desired flushes better after starting a new batch + + Signed-off-by: Chris Wilson + +commit 85bb55e4a62666fa51af34d08699950be362aa57 +Author: Chris Wilson +Date: Wed Jun 25 11:45:55 2014 +0100 + + intel: Fix weblinks (again) + + Julien pointed out that I fail at checking links. + + Reported-by: Julien Cristau + Signed-off-by: Chris Wilson + +commit ff31d49bfa48a74eb9d8cb0afb1e2882ffbc7573 +Author: Chris Wilson +Date: Wed Jun 25 11:31:58 2014 +0100 + + intel: Fix weblinks + + Matti reported a few outdated links to intellinuxgraphics.org, now + superseded by 01.org. + + Reported-by: Matti Hämäläinen + Signed-off-by: Chris Wilson + +commit 8c1729aab6b49e7d4a3f48516a629b0d23e8591b +Author: Chris Wilson +Date: Wed Jun 25 09:00:04 2014 +0100 + + sna: Tweak scanout flush + + We now distinguish gpu_dirty whilst the bo is not flushed within a batch + and needs_flush for when it is dirty and still busy. + + Signed-off-by: Chris Wilson + +commit 26c4e850b8a7d13afc351097ee6f6b2f3f90e2b9 +Author: Chris Wilson +Date: Wed Jun 25 08:18:25 2014 +0100 + + sna: Throttle before doing a TearFree buffer replacement + + If the client is rendering fast, he may be rendering too fast and + starting to build up a backlog. + + Signed-off-by: Chris Wilson + +commit ea6b0bb8e1b358d728d80daac936ec6521154302 +Author: Chris Wilson +Date: Wed Jun 25 08:05:22 2014 +0100 + + sna: And fix the typo... + + Signed-off-by: Chris Wilson + +commit 3f4da671b0a570de8734cc668d8e8975c2fdbd90 +Author: Chris Wilson +Date: Wed Jun 25 08:01:57 2014 +0100 + + sna: Disable userptr for bdw + + Something fishy is afoot. But let's kill this particularly worrisome + regression so that we can do a full round of testing. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79053 + Signed-off-by: Chris Wilson + +commit 204ec74a61ba0b9628c686b98c48fa1220866c2d +Author: Chris Wilson +Date: Wed Jun 25 07:31:33 2014 +0100 + + sna: Check all connectors for reuse + + Do not rely on the MST path being present to indicate a connector that + may be reused. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80355 + Signed-off-by: Chris Wilson + +commit 43ad5dbc60e1f50a9cdcfc035bc271f1f28438c2 +Author: Rodrigo Vivi +Date: Tue Jun 24 03:14:54 2014 -0700 + + Add marketing names for Broadwell + + Even the unknown/reserved ones will stay with HD Graphics. + + v2: Add missing names to intel.man and README files as well. (Chris) + + Cc: Chris Wilson + Signed-off-by: Rodrigo Vivi + +commit 78053bb84217e842615669dfa2f1e7e971ce9860 +Author: Chris Wilson +Date: Tue Jun 24 20:51:54 2014 +0100 + + Add reserved PCD IDs for Broadwell + + Updating using kernel commit fb7023e0e248a33cb00d0a9cdce0bcedaa1ad284 + Author: Rodrigo Vivi + Date: Tue Jun 10 10:09:52 2014 -0700 + + drm/i915: BDW: Adding Reserved PCI IDs. + + Signed-off-by: Chris Wilson + +commit 74c1cf60a7ce7e79bc727780151f4f233798e5f4 +Author: Chris Wilson +Date: Tue Jun 24 20:49:18 2014 +0100 + + sna: Add yet more DBG messages to MST discovery + + Signed-off-by: Chris Wilson + +commit ca296c18316a3ce1682beefd5daa4702593cd529 +Author: Chris Wilson +Date: Tue Jun 24 16:37:52 2014 +0100 + + configure: Display our README before the summary + + Signed-off-by: Chris Wilson + +commit d14d7efb28c3e323203139b7c1562b1e0bc526f0 +Author: Chris Wilson +Date: Tue Jun 24 16:33:43 2014 +0100 + + intel: Add a note about the myriad places we have identifier strings + + Signed-off-by: Chris Wilson + +commit 0c7cf7a6bb1c91b59ad326198f3364554e3dfeb5 +Author: Chris Wilson +Date: Tue Jun 24 11:50:55 2014 +0100 + + intel: Wait for our expected device node to appear + + If the path we want to open for the KMS device is not yet available, + wait a short while and try again. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80397 + Signed-off-by: Chris Wilson + +commit 5c8829b30ad3acd2e59dac9ffa2aba8aadcada61 +Author: Chris Wilson +Date: Tue Jun 24 11:35:23 2014 +0100 + + sna: Add some more DBG around connector discovery + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80355 + Signed-off-by: Chris Wilson + +commit 271ed88e517745505c133bd68c40a8566ec8a625 +Author: Chris Wilson +Date: Tue Jun 24 11:24:26 2014 +0100 + + sna: Ensure serial is not 0 for runtime MST discovery + + We reserve serial==0 for the initial setup that is run before RandR is + configured. After the server is running, we have to take extra steps to + make the outputs visible to userspace. + + Signed-off-by: Chris Wilson + +commit 92dd13ae8dbddc31d0291dd12683fc7e3f65ffde +Author: Chris Wilson +Date: Tue Jun 24 11:04:01 2014 +0100 + + sna: Fix the usual "x = y" typos in creating boxes + + Fixes regression from + + commit 1d74b2e07d125ad95b9db6c9c032e90faf2bfa60 + Author: Chris Wilson + Date: Tue Jun 24 08:58:51 2014 +0100 + + sna: Decompose self-copy into overlapping/non-overlapping regions + + Signed-off-by: Chris Wilson + +commit 92119ef0939897dd1850b417d04a2ba558aee8ca +Author: Chris Wilson +Date: Tue Jun 24 10:23:03 2014 +0100 + + sna/glyphs: Clip damage to dst + + We only check if the hardware will automatically discard writes outside + of the target pixmap, but we must manually clip the damage before adding + it to our tracker. + + Reported-by: Jiri Slaby + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c58 + Signed-off-by: Chris Wilson + +commit b33be7fbac005eb222302ffbb533ded1cd700953 +Author: Chris Wilson +Date: Tue Jun 24 10:17:47 2014 +0100 + + sna: Trim composite region against dst clip extents + + Signed-off-by: Chris Wilson + +commit f66e25def3431a900068cc1c23a6b1e8322ef046 +Author: Chris Wilson +Date: Mon Jun 23 16:14:28 2014 +0100 + + intel: Wait for the DRM device to load + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80397 + Signed-off-by: Chris Wilson + +commit 1d74b2e07d125ad95b9db6c9c032e90faf2bfa60 +Author: Chris Wilson +Date: Tue Jun 24 08:58:51 2014 +0100 + + sna: Decompose self-copy into overlapping/non-overlapping regions + + We only need to stage the copy for the overlapping portion of the + self-copy, for the rest we can do in a single pass. + + Signed-off-by: Chris Wilson + +commit 6e2cee27c379278b0321fd1db34ed80c439115a7 +Author: Chris Wilson +Date: Tue Jun 24 07:34:46 2014 +0100 + + sna/dri2: Add a dash more asserts + + References: https://bugs.freedesktop.org/attachment.cgi?id=101618 + Signed-off-by: Chris Wilson + +commit 706480bde6120f84388a99085ed3d1cc3b759697 +Author: Chris Wilson +Date: Mon Jun 23 22:50:23 2014 +0100 + + sna: Disable CRTC after MST topology change + + In order to disable CRTC after marking outputs as removed after probing + MST topology updates, we must manually mark the CRTCs as no longer + enabled. + + Signed-off-by: Chris Wilson + +commit 5530cb4165da60f7b929b84d733d5eefcf4ec5fe +Author: Chris Wilson +Date: Mon Jun 23 15:47:13 2014 +0100 + + sna: Silence compiler warning for shadowed variable + + sna_display.c: In function 'sna_mode_redisplay': + sna_display.c:6322:12: warning: declaration of 'fb_id' shadows a global declaration [-Wshadow] + sna_display.c:223:24: warning: shadowed declaration is here [-Wshadow] + CC sna_display_fake.lo + + Signed-off-by: Chris Wilson + +commit ded05e8abb248664124d2b86f77c27497a252c4e +Author: Chris Wilson +Date: Mon Jun 23 22:15:56 2014 +0100 + + sna: Allow scratch pixmap to allocate linear GPU bo + + When allocating a scratch pixmap, we do so in the expectation that + rendering on the GPU is always preferrable, so even allocate a small + linear bo. + + Signed-off-by: Chris Wilson + +commit 6c5658b14451239b8e4333702a227d83eed09f96 +Author: Chris Wilson +Date: Mon Jun 23 14:11:27 2014 +0100 + + sna: Promote to full GPU bo after forced migration away from CPU bo + + Signed-off-by: Chris Wilson + +commit 25776547bb7d76010f948769c8c08a7f418b15fd +Author: Chris Wilson +Date: Mon Jun 23 14:02:51 2014 +0100 + + sna: Prefer rendering on the CPU to avoid damage migration + + Signed-off-by: Chris Wilson + +commit a3c9cbefcb9971900638144286b59112e3cfd404 +Author: Chris Wilson +Date: Mon Jun 23 12:27:30 2014 +0100 + + sna: Force creation of GPU bo for drawing if need be + + Now that we are more eager to transfer to the GPU bo if we expect + rendering to the CPU bo to be either slow or risk potential corruption, + we can find ourselves in a recursive loop when we also decide not to + create the GPU bo. Prevent that by explicitly creating the GPU bo if + desired. + + Signed-off-by: Chris Wilson + +commit 827b89fa2d5fca0ffd709c17bcdbfdaf95da918f +Author: Chris Wilson +Date: Mon Jun 23 11:44:22 2014 +0100 + + sna/gen6+: Initialise src offset before use + + Fixes regression from + + commit 30348efd57135edee41fccb87133c572b6473aa8 + Author: Chris Wilson + Date: Mon Jun 23 11:14:25 2014 +0100 + + sna/gen6+: Avoid adjusting copy coordinates until commited to using them + + which assumed that the render state was being zeroed. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 6848fb235b1bac84e91d1efde4094540180c4d48 +Author: Chris Wilson +Date: Mon Jun 23 11:27:20 2014 +0100 + + sna: Fix flushing empty batches + + A logic inversion in + + commit 1909910fdf89216d18703e50728f4604f75d5d66 + Author: Chris Wilson + Date: Sun Jun 22 20:19:22 2014 +0100 + + sna: Inject a batch flush before adding a fresh bo + + also applied the injection to when the batch was empty. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c48 + Signed-off-by: Chris Wilson + +commit 60fd6764eba05f51bb83efba5593975cf8d1285b +Author: Chris Wilson +Date: Mon Jun 23 11:25:47 2014 +0100 + + sna: Handle old busy_ioctl not reporting the active ring + + If we have an old kernel, just presume that the bo was last active on the + render ring. + + Signed-off-by: Chris Wilson + +commit 30348efd57135edee41fccb87133c572b6473aa8 +Author: Chris Wilson +Date: Mon Jun 23 11:14:25 2014 +0100 + + sna/gen6+: Avoid adjusting copy coordinates until commited to using them + + If we need to fallback to the BLT unit, we need to pass it the original + source/dest coordinates and not our transformed render coordinates. So + keep the original values intact until we start emitting the render + operation. + + Signed-off-by: Chris Wilson + +commit e1e853edee67c3ced43d5e4b1fbd52ca4c92966d +Author: Chris Wilson +Date: Mon Jun 23 10:14:09 2014 +0100 + + sna/gen4+: Add some more asserts around recreating vertex buffers + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461#c46 + Signed-off-by: Chris Wilson + +commit 978790dc52fa9551b3bccbd91988b93988e937df +Author: Chris Wilson +Date: Mon Jun 23 09:47:34 2014 +0100 + + sna: Allow the CPU bo to be created if GPU rendering is forced + + Signed-off-by: Chris Wilson + +commit b2206eca00e497aff0d79a6e9feae3d9c5070dcc +Author: Chris Wilson +Date: Mon Jun 23 09:42:37 2014 +0100 + + sna/gen6+: Encourage the compiler to inline a couple of key functions + + Signed-off-by: Chris Wilson + +commit bb4c057620fb0558a77a9b7db538786ffda7cf13 +Author: Chris Wilson +Date: Mon Jun 23 09:22:13 2014 +0100 + + sna: Prefer to render over damage into the GPU bo + + Signed-off-by: Chris Wilson + +commit 416c223861aaeb61c6408e6537315b78e908df43 +Author: Chris Wilson +Date: Mon Jun 23 09:20:55 2014 +0100 + + sna: Do not set CAN_CREATE_GPU flag for untiled allocations + + Signed-off-by: Chris Wilson + +commit fb51ec44f4b6069ab854233d5d0da34eb79f754c +Author: Chris Wilson +Date: Mon Jun 23 09:07:13 2014 +0100 + + sna: Rename IGNORE_CPU to IGNORE_DAMAGE to better reflect its purpose + + Signed-off-by: Chris Wilson + +commit 96d2749660e1738847222f2d9dbb7303b7deb5bf +Author: Chris Wilson +Date: Mon Jun 23 08:18:23 2014 +0100 + + sna: Add DBG breadcrumbs to sna_output_discover() + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80355 + Signed-off-by: Chris Wilson + +commit a33aa554fa3df8ca34012cf1c6ecb11fa69ac7fc +Author: Chris Wilson +Date: Mon Jun 23 07:42:30 2014 +0100 + + sna/gen4+: Add box emitters for the generic vertex paths + + Signed-off-by: Chris Wilson + +commit 1909910fdf89216d18703e50728f4604f75d5d66 +Author: Chris Wilson +Date: Sun Jun 22 20:19:22 2014 +0100 + + sna: Inject a batch flush before adding a fresh bo + + Fresh bo (those without a reservation already defined, ala + presumed_offset) will cause the kernel to do a full relocation pass. So, + if possible flush the already correct batch in the hope of trimming the + amount of checking the kernel has to perform on this new batch. + + Signed-off-by: Chris Wilson + +commit 83cbbcd816e449402f3d49aeba3c099a20b8bc1b +Author: Chris Wilson +Date: Mon Jun 23 07:29:20 2014 +0100 + + sna: Add missing string for DBG + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80355#c12 + Signed-off-by: Chris Wilson + +commit f22ea4e821a33eccd3a9283d7ab048857008f7e8 +Author: Chris Wilson +Date: Sun Jun 22 17:53:59 2014 +0100 + + sna: Disable unused CRTC after undock events + + If undocking removes output (as the MST topology changes and some + outputs then become unreachable), we may leave dangling CRTC. This + confuses us, so disable any enabled but unconnected CRTC after the + undock event. + + Reported-by: Sree Harsha Totakura + References: https://bugs.freedesktop.org/show_bug.cgi?id=80355#c5 + Signed-off-by: Chris Wilson + +commit dca0f1c2ccf14df38764ed12b971dc491cf22608 +Author: Chris Wilson +Date: Sun Jun 22 17:53:59 2014 +0100 + + sna: Track CRTC mode changes and discard old flips + + If we have a pending flip across a modeset we must be careful to drop + the stale flip_bo after the modeset. + + Reported-by: Sree Harsha Totakura + References: https://bugs.freedesktop.org/show_bug.cgi?id=80355#c8 + Signed-off-by: Chris Wilson + +commit dae370423ad85b9d9c576277da5a9fb92ab3d3df +Author: Chris Wilson +Date: Sun Jun 22 11:45:35 2014 +0100 + + sna: Clean up CRTC on CloseScreen + + We need to do this to stop any stray references escaping through kernel + events now that we are passing the CRTC through the event. + + Signed-off-by: Chris Wilson + +commit 923dc207df7b05c138c628983ccaf2493dd63b62 +Author: Chris Wilson +Date: Thu Jun 19 10:17:11 2014 +0100 + + sna: Discard write hint from a couple more move-to-gpu + + Signed-off-by: Chris Wilson + +commit 2046a49be59866a16db776ba53a588dbf6c02b12 +Author: Chris Wilson +Date: Sat Jun 21 15:43:32 2014 +0100 + + sna: Clear the transform flag on disabling the CRTC + + In places, we assume that if the flag is set, we must have an active + CRTC. However, we were not clearing when disabling the CRTC. + + Reported-by: Sree Harsha Totakura + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80325 + Signed-off-by: Chris Wilson + +commit b3d3c0e8e75a963262e4dc463fef60d7e9f1f01a +Author: Chris Wilson +Date: Fri Jun 20 20:01:23 2014 +0100 + + sna: Avoid blending with the render engine on snoopable bo + + This seems slightly weird, as there is nothing to indicate that this + would generate incorrect results only for snoopable bo. But no many of + flushes make my pnv box happy, so adjust the placement logic to move the + blending operation away from the snoopable target. This is sensible for + reasons of avoiding snoops from the render pipeline anyway. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80253 + Reported-and-tested-by: Matti Hämäläinen + Signed-off-by: Chris Wilson + +commit 219f6bd9e863f9c89cc4168895f89741ce6dbcbb +Author: Chris Wilson +Date: Fri Jun 20 17:06:55 2014 +0100 + + sna: Be more flexible in converting random subsamples to 8x8 tiles + + Signed-off-by: Chris Wilson + +commit 91bc9e42e434abd56ce2e4fc5e08d07376fe8bd3 +Author: Chris Wilson +Date: Fri Jun 20 16:13:49 2014 +0100 + + sna: Mark up const boxes to keep the compiler happy + + Pass around const to suppress a few compiler warnings. + + Signed-off-by: Chris Wilson + +commit e5c68b4358ce541929681c8c1e0ad3ef8c1dc9ed +Author: Chris Wilson +Date: Fri Jun 20 14:31:19 2014 +0100 + + sna: Feed more operations into the 8x8 BLT tiler + + Signed-off-by: Chris Wilson + +commit d2b90ac969656de35ec86973f66074654b0e9b4b +Author: Chris Wilson +Date: Fri Jun 20 14:29:43 2014 +0100 + + sna: Color patterns for BLT are required to be aligned to 256 byte boundaries + + This so far appears to be the most restrictive alignment required, so + simply increase the upload alignment to 256 bytes. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80033 + Signed-off-by: Chris Wilson + +commit 8d7e7010e33d73a7d99948403b62d859d7a4dfaa +Author: Chris Wilson +Date: Fri Jun 20 08:28:32 2014 +0100 + + test: Increase number of tiled sources + + Significantly improve the stress impose upon the tiled BLT operations. + Also start dumping pngs of the failures. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80033 + Signed-off-by: Chris Wilson + +commit db6dfc3227155a4792ba3831681daf16839b14bb +Author: Chris Wilson +Date: Fri Jun 20 07:28:02 2014 +0100 + + sna/dri2: Don't decouple front buffer tracking for invalid SwapBuffer calls + + Signed-off-by: Chris Wilson + +commit 113a8b9be9dd7ffbc6f7c713bc40561bdf38e8b0 +Author: Chris Wilson +Date: Thu Jun 19 20:39:59 2014 +0100 + + sna: Mark upload from SHM segment as read-only + + As this may be mapped by the Xserver using a read-only SHM segment, we + are forced to treat it always as read-only. And this being X, that it is + using a SHM segment is opaque to the driver. Fantastic middlelayer. + + This was incorrectly removed in + commit e680e54eab6ffa72e5e1eb6cc0e3fe4b235b06a1 + Author: Chris Wilson + Date: Wed Jun 11 10:48:26 2014 +0100 + + sna: Ignore setting read-only for temporary userptr maps + + Also let's not forget the ShmPutImage -> CopyArea path. + + Reported-by: Christoph Haag + Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78411 + Signed-off-by: Chris Wilson + +commit df89b4941130b5ff020c6ef3e244dcf5fec45f2a +Author: Chris Wilson +Date: Thu Jun 19 20:39:59 2014 +0100 + + sna: Mark upload from SHM segment as read-only + + As this may be mapped by the Xserver using a read-only SHM segment, we + are forced to treat it always as read-only. And this being X, that it is + using a SHM segment is opaque to the driver. Fantastic middlelayer. + + This was incorrectly removed in + commit e680e54eab6ffa72e5e1eb6cc0e3fe4b235b06a1 + Author: Chris Wilson + Date: Wed Jun 11 10:48:26 2014 +0100 + + sna: Ignore setting read-only for temporary userptr maps + + Reported-by: Christoph Haag + Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78411 + Signed-off-by: Chris Wilson + +commit 6b32cf3a3c908bd29496fcf5d190fd0f8c657ae6 +Author: Chris Wilson +Date: Thu Jun 19 12:29:58 2014 +0100 + + sna: Missed fixing y tile offset in last commit + + Signed-off-by: Chris Wilson + +commit edeb2ddd170a1817ced45abada53346c5cd8c30b +Author: Chris Wilson +Date: Thu Jun 19 11:51:00 2014 +0100 + + sna: Use the right pattern origin for tiled 8x8 extraction + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80033 + Signed-off-by: Chris Wilson + +commit 1752e2d647cdb7cbff0ae7d0f0d0b761b5942965 +Author: Chris Wilson +Date: Thu Jun 19 11:14:25 2014 +0100 + + sna: Fix up small extents for 8x8 tile construction + + Signed-off-by: Chris Wilson + +commit f866a20c991d52fd2cf4ce63acc3cd44534ce5be +Author: Chris Wilson +Date: Thu Jun 19 10:49:09 2014 +0100 + + sna: Wrap pointer access for 8x8 tile construction + + The kernel can quite happily send a SIGBUS whenever we read from an bo + (due to oom), so catch it and handle it. + + Signed-off-by: Chris Wilson + +commit b1aab55d594f03e51c3abf1743d00c56ef6d7797 +Author: Chris Wilson +Date: Thu Jun 19 09:47:02 2014 +0100 + + sna: Always readback shadow damage after replacing the buffer + + Instead track what we explicitly want to discard for the next operation, + so that we don't have to copy back the whole buffer if we have to + replace the shadow and intend to overwrite it all. + + Signed-off-by: Chris Wilson + +commit f4b930318c68e0e07d677ebc7b4caa27912561db +Author: Chris Wilson +Date: Thu Jun 19 07:40:16 2014 +0100 + + sna/dri2: Replace assertion with code to skip updating the back buffer + + After a window resize or redirection, the DRI2BufferPtr become stale but + it may take a while for the Client to notice and reconfigure. Just + skip touching stale backbuffers and let the Client catch up. + + Signed-off-by: Chris Wilson + +commit c257c936b42b92827b784cee0b7caa54e6040364 +Author: Chris Wilson +Date: Wed Jun 18 22:15:42 2014 +0100 + + sna: Fix modulus for partial conversion of tiles to 8x8 patterns + + Signed-off-by: Chris Wilson + +commit 9489cc6c70abf53d9ca45228b0aa9fb1fc3f9b72 +Author: Chris Wilson +Date: Wed Jun 18 21:28:11 2014 +0100 + + sna: Delete the silly typo + + Not checking DAMAGE_IS_ALL() correctly leads to an assertion failure. + + Signed-off-by: Chris Wilson + +commit 51a0559b120dd0a57a938b300bccefbf1142e495 +Author: Chris Wilson +Date: Wed Jun 18 20:55:02 2014 +0100 + + sna: Do not treat both src/dst having no clones as being the same + + Fixes regression from + commit 62aaf2ff4f8597067cf387865707baa00ed9a123 + Author: Chris Wilson + Date: Wed Jun 18 18:41:15 2014 +0100 + + sna: Skip redundant copies when already cloned + + Signed-off-by: Chris Wilson + +commit 377b0e8657aab13dc90134853a03feb95f515567 +Author: Chris Wilson +Date: Wed Jun 18 19:59:14 2014 +0100 + + sna: Add log breadcrumbs with valgrind + + Signed-off-by: Chris Wilson + +commit 273c82a574896885f9f4a78a7463cc4620803624 +Author: Chris Wilson +Date: Wed Jun 18 18:47:14 2014 +0100 + + sna: Fix DBG compilation + + Missed updaing the DBG message in + + commit 83c0f034454ef0f474126a3398e5e790ac5ef842 + Author: Chris Wilson + Date: Wed Jun 18 16:51:46 2014 +0100 + + sna: Pass desired CRTC viewport for completing single CRTC flips + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80157 + Signed-off-by: Chris Wilson + +commit 62aaf2ff4f8597067cf387865707baa00ed9a123 +Author: Chris Wilson +Date: Wed Jun 18 18:41:15 2014 +0100 + + sna: Skip redundant copies when already cloned + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit 83c0f034454ef0f474126a3398e5e790ac5ef842 +Author: Chris Wilson +Date: Wed Jun 18 16:51:46 2014 +0100 + + sna: Pass desired CRTC viewport for completing single CRTC flips + + We cannot simply compare against the crtc->shadow_bo for all our needs, + so pass in exactly the setup we want and apply that. In particular this + is required when flipping away from the single CRTC setup on secondary + pipes. + + Fixes TearFree multi-monitor regression from + commit 3932e97057fca16615adaefbc1eb25a0d51a1d8b [2.99.912] + Author: Chris Wilson + Date: Mon Jun 9 08:58:15 2014 +0100 + + sna/dri2: Allow TearFree flipping to individual CRTC + + Reported-by: Leo Wolf + Signed-off-by: Chris Wilson + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80191 + +commit 7119d394a673f40eb467d040c6febf3749924394 +Author: Hans de Goede +Date: Wed Jun 18 15:01:37 2014 +0200 + + uxa: Mark the output as off before making pipe changes + + This is a partial "backport" of commit c6cd10f536, which makes the same + change for sna, to avoid users still using uxa ending up with a blackscreen + after plugging in an external monitor. + + Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1032978 + Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1103806 + Signed-off-by: Hans de Goede + +commit 52af321a11b5672194bc0bad033b0866221bf4c7 +Author: Hans de Goede +Date: Wed Jun 18 15:01:36 2014 +0200 + + uxa: When the output is off, report the cached backlight value + + This is a "backport" of commit b545e10c50cb to uxa, so that users who are + still using uxa, don't end up with a black screen after suspend / resume. + + Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1032978 + Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1103806 + Signed-off-by: Hans de Goede + +commit 44b5912ffcf8dcf4b4b8d3518dd0b62a284f6ee4 +Author: Chris Wilson +Date: Wed Jun 18 14:48:33 2014 +0100 + + sna/gen8: Fix cleanup after failing to convert channel + + Signed-off-by: Chris Wilson + +commit 21b6e551528fdd939004cfb02a4f192e750a33a1 +Author: Chris Wilson +Date: Wed Jun 18 14:44:09 2014 +0100 + + sna/gen8: Fix unaligned() to return true when not aligned + + Signed-off-by: Chris Wilson + +commit c5b063b8cc23cc43be458cb3b0d1b28652a24951 +Author: Chris Wilson +Date: Wed Jun 18 14:34:04 2014 +0100 + + sna: Assert that we do not try to mmap a proxy + + Signed-off-by: Chris Wilson + +commit 40bd45fb802366aa013b9089848b67a28bf3b1ee +Author: Hans de Goede +Date: Wed Jun 18 14:11:05 2014 +0100 + + backlight: Fix compiler error + + /usr/include/xorg/os.h around line 579 reads: + + extern _X_EXPORT char * + strndup(const char *str, size_t n); + + However strndup is already defined by glibc, and this redefine causes a + compile error. + + This gets triggered because backlight.c does: + + Without first doing: + + Causing HAVE_STRNDUP to not be defined. + + Signed-off-by: Hans de Goede + +commit e52f917a2370026073ed6851161393a69ee94abe +Author: Chris Wilson +Date: Wed Jun 18 10:18:26 2014 +0100 + + sna: Use nxm tiled blits for small regions of large tiles + + If the region we are blitting is either narrow or short, we may be able + to construct a tiling pattern out of a large pixmap. + + In the process, spot a regression due to + + commit 542aeca6e67fc64f9133ca3e27ac8eca28af6d25 + Author: Chris Wilson + Date: Tue Jun 17 12:26:30 2014 +0100 + + sna: Tweak creation 8x8 tiled patterns + + which copied too much from the source line. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79888 + Signed-off-by: Chris Wilson + +commit b90f6c5aa7359ea6936ae4a7951fcd3bdad05d58 +Author: Chris Wilson +Date: Wed Jun 18 10:17:02 2014 +0100 + + sna: Simplify sna_pixmap_get_source + + kgem_bo_upload_image was open-coded, so replace it with a call to the + common function + + Signed-off-by: Chris Wilson + +commit 8ea2dd23ab85dc2d4ad0de326c2176354d61cf20 +Author: Chris Wilson +Date: Wed Jun 18 10:16:26 2014 +0100 + + sna: Add DBG option to disable snoop bo cacheing + + Signed-off-by: Chris Wilson + +commit b2081345843152dadcaa4fbc843b38240d1a3484 +Author: Chris Wilson +Date: Wed Jun 18 07:37:00 2014 +0100 + + sna/dri2: fix invalid DBG string + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80157 + Signed-off-by: Chris Wilson + +commit 77f1a16f1145e69d69a76f2db4b1c60d9a7a4d53 +Author: Chris Wilson +Date: Tue Jun 17 23:27:16 2014 +0100 + + sna: Set the correct mapping type after calling mmap__async + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80001 + Signed-off-by: Chris Wilson + +commit d49f53cc00258e3b1e1a898c02e219b336716002 +Author: Chris Wilson +Date: Tue Jun 17 22:23:02 2014 +0100 + + sna: Fix computing source bo for BLT operations + + If we migrate the pixmap to the GPU, use the GPU bo. This may fix an issue + where we might end up using the CPU bo in a rare circumstance. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80033 + Signed-off-by: Chris Wilson + +commit 475562d713a00e2f60f7ca067d753fd965d71717 +Author: Chris Wilson +Date: Tue Jun 17 22:25:05 2014 +0100 + + sna: Align some function parameters + + Signed-off-by: Chris Wilson + +commit c91fc0aad843ffc2660f6a3bf9b875d190e0b0dd +Author: Chris Wilson +Date: Tue Jun 17 17:06:05 2014 +0100 + + sna: Remove invalid assert + + Present and flip fallback may queue self-flips, so the assertion that + the crtc->flip_bo != crtc->bo is false. + + Signed-off-by: Chris Wilson + +commit 0ca25c7b49efa9c83a3ce5b727e5a339a73d8ee0 +Author: Chris Wilson +Date: Tue Jun 17 14:08:06 2014 +0100 + + sna: Cache small pixmaps rather than forcing a large fallback for BLT operations + + Signed-off-by: Chris Wilson + +commit 322e51a3a552d89e5e5ecbb82a9243f134c8d36f +Author: Chris Wilson +Date: Tue Jun 17 13:47:32 2014 +0100 + + sna: Relax PREFER_GPU so that we don't needless create small GPU bo + + Signed-off-by: Chris Wilson + +commit 542aeca6e67fc64f9133ca3e27ac8eca28af6d25 +Author: Chris Wilson +Date: Tue Jun 17 12:26:30 2014 +0100 + + sna: Tweak creation 8x8 tiled patterns + + Avoid reading back from a GTT mmapping. + + Signed-off-by: Chris Wilson + +commit 4ff5cc539bc3f88ab9c05dc67c25aab08cbdf859 +Author: Chris Wilson +Date: Tue Jun 17 10:54:39 2014 +0100 + + sna/dri2: Fixup failure to do a render copy for DRI2CopyRegion + + Signed-off-by: Chris Wilson + +commit 96d1fe314c4bb4d862b057a440e575bd32d63460 +Author: Chris Wilson +Date: Tue Jun 17 08:51:00 2014 +0100 + + sna: Add a few missing checks for all-damaged + + Signed-off-by: Chris Wilson + +commit 30f521c717f7301004e7cb77ba66b840b3f773c6 +Author: Chris Wilson +Date: Tue Jun 17 08:30:55 2014 +0100 + + sna: Discard GPU damage for the magic upload proxy + + The magic upload proxy is initially considered damaged in both the GPU + and CPU. + + Signed-off-by: Chris Wilson + +commit e5b94c2d9b29b78432aa72049934e365a2913710 +Author: Chris Wilson +Date: Tue Jun 17 08:12:42 2014 +0100 + + sna/glyphs: DBG compile fix + + Signed-off-by: Chris Wilson + +commit a4d845bc8f77e4a36064f132720ce462d0bdd5b4 +Author: Chris Wilson +Date: Mon Jun 16 14:25:16 2014 +0100 + + sna: Regularly check the cache level on bo + + Signed-off-by: Chris Wilson + +commit 09f0fe9b3943ae2ba1e0ebd679ea04177427a8cf +Author: Chris Wilson +Date: Mon Jun 16 12:53:34 2014 +0100 + + sna/dri2: Allow single crtc exchanges to be queued up + + Signed-off-by: Chris Wilson + +commit 4ab99d67990d5834061a10b0bd1dd220d4611248 +Author: Chris Wilson +Date: Mon Jun 16 12:51:08 2014 +0100 + + uxa: Allocate frontbuffer to meet old fence constaints + + libdrm is a little lax and does not allocate sufficient space for us to + safely use buffers on old gen. So compute the size we want for + ourselves. + + Reported-by: Cem Aydin + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80088 + Signed-off-by: Chris Wilson + +commit 10cb36e1ddc6f4bf41941b24d6557343aa595a13 +Author: Chris Wilson +Date: Mon Jun 16 10:33:07 2014 +0100 + + sna/glyphs: Add DBG option to force use of the glyph image mask + + Signed-off-by: Chris Wilson + +commit 8f0fc2ed4cc19c90dd2f519080915ca0c54e1baf +Author: Chris Wilson +Date: Mon Jun 16 10:27:16 2014 +0100 + + uxa: Add some explanation to why bo were rejected + + References: https://bugs.freedesktop.org/show_bug.cgi?id=80088 + Signed-off-by: Chris Wilson + +commit 6b82962e58c0959c94f2df1f0ebd9a478b15cb6b +Author: Chris Wilson +Date: Mon Jun 16 10:13:09 2014 +0100 + + sna: Fix logic inversion for final placement in is_gpu_dst() + + Signed-off-by: Chris Wilson + +commit 62102f505cd13840e4c910adbe762b3fb46dfaec +Author: Chris Wilson +Date: Mon Jun 16 09:46:54 2014 +0100 + + sna: Promote better active buffer reuse + + Signed-off-by: Chris Wilson + +commit 2877d018d3510e415f273ce955eb5c272c340e7d +Author: Chris Wilson +Date: Mon Jun 16 09:24:45 2014 +0100 + + sna/glyphs: Show number of glyphs in DBG + + Signed-off-by: Chris Wilson + +commit 38434b29f4a7b324704bbb1e772371be3c0e397b +Author: Chris Wilson +Date: Mon Jun 16 08:03:21 2014 +0100 + + sna: Fix some batch DBG + + Helps to check for a successful read when we want to show the batch + after execution. + + Signed-off-by: Chris Wilson + +commit 243bd26ad31776b2dc45563107e669cf7b45fd91 +Author: Chris Wilson +Date: Sun Jun 15 21:42:10 2014 +0100 + + sna: Clear our private hints about front rendering exported bo + + Unlike GLXWindows, GLXPixmaps are rendered directly into, without a + staging copy. Therefore we must treat those carefully when exported and + clear our hints everytime control passes back to the Client. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79999 + Signed-off-by: Chris Wilson + +commit 500e77d765580e8581c95117b941a4daa940c21e +Author: Chris Wilson +Date: Sun Jun 15 20:55:30 2014 +0100 + + sna: Add more DBG to track transitions between CRTC and its shadow or flip bo + + Signed-off-by: Chris Wilson + +commit 0a6a94630f4fec26bed2aefb25de1a165193ff10 +Author: Chris Wilson +Date: Sun Jun 15 14:04:50 2014 +0100 + + test: Add a simple SHM test skeleton + + Signed-off-by: Chris Wilson + +commit 981aafe797f25aca4977a22f271d387b7fb4ae63 +Author: Chris Wilson +Date: Fri Jun 13 21:41:36 2014 +0100 + + sna: Enable TearFree by default for systems with PSR + + Panel Self-Refresh requires us to avoid frontbuffer rendering in order + to be power efficient. This is a job for TearFree! + + Signed-off-by: Chris Wilson + +commit b27837d5372facde0f9f69eb8df664d2798f0911 +Author: Chris Wilson +Date: Sat Jun 14 06:51:34 2014 +0100 + + sna: Fix assertions for discarding upload caches + + The upload caches are special, along with having a bo->proxy, they also + claim to be completely damaged on both the GPU and CPU. Allow that to + pass through when discarding the proxy. + + Reported-by: Nick Bowler + Bugzilla; https://bugs.freedesktop.org/show_bug.cgi?id=79992 + Signed-off-by: Chris Wilson + +commit 15485602d8451bcf6c2e979ccbd9cdc11111bcce +Author: Chris Wilson +Date: Fri Jun 13 20:30:25 2014 +0100 + + sna: Use the right is-clipped hint + + The region here has yet to be clipped, and so the only valid is-clipped + hint is from the flags computed from the PolyRect extents. Make sure we + use those when determining whether it is valid to discard damage. + + Fixes regression from + commit ad0390068832ad4727371902fe41a85a53de1894 [2.99.903] + Author: Chris Wilson + Date: Tue Sep 24 10:00:03 2013 +0100 + + sna: Separate out copy preferrence from operating in place decision + + Reported-by: Nick Bowler + Tested-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79992 + Signed-off-by: Chris Wilson + +commit b082a07a69ba5490fba47766c4f608b1cdf2427e +Author: Chris Wilson +Date: Fri Jun 13 18:56:57 2014 +0100 + + sna: Only discard the CPU bo if we have a GPU bo to transfer the damage to + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79992 + Signed-off-by: Chris Wilson + +commit 05fdfe3b2813495ea122471ed6dde340e538aa65 +Author: Chris Wilson +Date: Fri Jun 13 21:41:16 2014 +0100 + + intel-virtual-output: Compile fixes + + Signed-off-by: Chris Wilson + +commit 8a92261b22a8c134a48d1491627ac05136563603 +Author: Chris Wilson +Date: Fri Jun 13 19:59:16 2014 +0100 + + intel-virtual-output: Disable outputs on remote displays upon shutdown + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79994 + Signed-off-by: Chris Wilson + +commit 0c6fa0cdf0cebcd592281e578da7a7f53cbfe186 +Author: Chris Wilson +Date: Fri Jun 13 19:29:41 2014 +0100 + + intel-virtual-output: Initialise image after clone + + As the image inherits its width/height from the clone, we need to set + those first on the clone. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79994 + Signed-off-by: Chris Wilson + +commit 79b4e45ebe3a61f9b5937ad226eead9eebce87ac +Author: Chris Wilson +Date: Fri Jun 13 19:15:08 2014 +0100 + + intel-virtual-output: Only call XShmDetach on a valid SHM segment + + Saves a couple of extraneous XErrors. + + Signed-off-by: Chris Wilson + +commit c8074b6bcfa8c208433574721135faa4d919d32a +Author: Chris Wilson +Date: Fri Jun 13 18:37:15 2014 +0100 + + intel-virtual-output: Check for an error creating the DRI3 fd + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79994 + Signed-off-by: Chris Wilson + +commit 0a0b9dc3538ef731463fb321852b8802cd04e457 +Author: Chris Wilson +Date: Fri Jun 13 16:14:43 2014 +0100 + + sna: Refine decision whether to use the GPU or render inplace + + Signed-off-by: Chris Wilson + +commit dd87aa8f85c4bafa105fd881a0cce45bda6143df +Author: Chris Wilson +Date: Fri Jun 13 15:06:13 2014 +0100 + + sna: Track the pageflip bo's busyness + + Signed-off-by: Chris Wilson + +commit 8322e3e5c6ed19e029f365d869c80388863c424d +Author: Chris Wilson +Date: Fri Jun 13 13:50:34 2014 +0100 + + intel: Check that the fd points to i915 after authorising + + The call to GETPARAM requires either a rendernode or authorisation. + Therefore we can only assert that the fd is a valid i915 handle after + authorise() and not before. + + Reported-by: Hans de Goede + Signed-off-by: Chris Wilson + +commit 97003b1a2d6c8beb5c4df4bece5a2d5b03b5ae2f +Author: Chris Wilson +Date: Fri Jun 13 12:32:12 2014 +0100 + + sna/gen6+: Prefer the BLT for large overlapping copies + + Signed-off-by: Chris Wilson + +commit 87fc78ac4f6bbfa8e9427d392356ee26942bf955 +Author: Chris Wilson +Date: Fri Jun 13 10:52:47 2014 +0100 + + sna: Try to reuse the current cursor if we fail to update + + As a last resort, continue to display the old cursor if we tried and + failed to create a new cursor. + + Signed-off-by: Chris Wilson + +commit cd381ad96eadb72eb1a983c973a5dd47f547fc8b +Author: Chris Wilson +Date: Fri Jun 13 09:31:50 2014 +0100 + + xvmc: Refactor mutex locking + + Signed-off-by: Chris Wilson + +commit bccfb768ee14348b6db5b140fdd6df5fdbfcad0c +Author: Chris Wilson +Date: Fri Jun 13 09:14:47 2014 +0100 + + xvmc: Sanitize compile and library flags + + Signed-off-by: Chris Wilson + +commit 5a0cb1049c2fa0586708719210a2d2cffa7a4491 +Author: Chris Wilson +Date: Fri Jun 13 09:15:30 2014 +0100 + + configure: Fix DRI2 build + + One s/DRI2/have_dri2/ too far. + + Signed-off-by: Chris Wilson + +commit d47a01fce4d3d9c043a45fc034dc436c0af41981 +Author: Chris Wilson +Date: Fri Jun 13 08:51:20 2014 +0100 + + sna: Reorder ignore_cpu_damage() to avoid asserts + + Tricksy asserts making sure that the correct arguments are passed + around! + + Reported-by: Arkadiusz Miskiewicz + +commit c4d4bd5d92c7e53a7be6fa7fe119e4507af213ec +Author: Chris Wilson +Date: Fri Jun 13 08:32:34 2014 +0100 + + sna/gen8: Allow reads from scanout to be cached + + Signed-off-by: Chris Wilson + +commit 8e743ccef8f19b1226ceb8d6a5ceab65584a620d +Author: Chris Wilson +Date: Fri Jun 13 08:27:05 2014 +0100 + + sna/gen8: Check for WT support before attempting to use the WT mocs + + It appears the kernel has a better idea when WT is supported on which + gen8 parts. I assumed it was always supported, but experience suggests + otherwise, so only use WT support when advertised. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79967 + Signed-off-by: Chris Wilson + +commit 7bc669dd4b7e3e5978e95e4131d1f9215afbc041 +Author: Chris Wilson +Date: Fri Jun 13 07:48:15 2014 +0100 + + configure: Allow manual disabling of each DRI level + + Signed-off-by: Chris Wilson + +commit ffe067705b524930d243b18e97508219ed26390c +Author: Chris Wilson +Date: Thu Jun 12 09:52:50 2014 +0100 + + sna: Try to use CPU uploads before BLT uploads + + As the BLT upload implies a sync (and a likely GPU boost), only do so if + we cannot do an immediate upload with the CPU, either directly to + backing memory or through the GTT. + + Signed-off-by: Chris Wilson + +commit 93444ea673be0ac11092a13ab3354f886f4aad63 +Author: Chris Wilson +Date: Thu Jun 12 09:26:14 2014 +0100 + + sna: Refactor USE_INPLACE debug macro + + Signed-off-by: Chris Wilson + +commit abbf6d6b7962650607dc3517939991de56ce8a91 +Author: Chris Wilson +Date: Wed Jun 11 21:14:00 2014 +0100 + + sna/gen8: Clear a couple more push constants + + Signed-off-by: Chris Wilson + +commit 7f9b015d87300810712a0b6f2680249fb0576f90 +Author: Chris Wilson +Date: Wed Jun 11 19:10:22 2014 +0100 + + sna: Remove bogus assertion + + The sna_pixmap is cleared afterwards, it does not need to be clear on + free. + + Signed-off-by: Chris Wilson + +commit e3a0e40310b6c46b2f887bc0d75b11cc06ec8fa0 +Author: Chris Wilson +Date: Wed Jun 11 18:07:46 2014 +0100 + + sna: Fix direction flags for memmove + + Under a compositor, the current deltas may invert the sense of the copy + direction, causing scrolling corruption. Simplify handling those flags + by making them invariant for the function. + + Reported-by: Bruno Prémont + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79843 + Signed-off-by: Chris Wilson + +commit 55660376d555131348e7efaaec66d6d27ffc1e6e +Author: Chris Wilson +Date: Wed Jun 11 17:43:33 2014 +0100 + + sna: Use the pixmap header creation routine + + A few more places could use the common pixmap creator, just remember to + handle the SHMPixmap complication! + + Signed-off-by: Chris Wilson + +commit 1beaa980ea6a9617f7dd4dc87b881c37cc7a277b +Author: Chris Wilson +Date: Wed Jun 11 16:41:22 2014 +0100 + + sna/gen6+: On small GT avoid the intermediate copy for overlaps + + If the memory bw is constrained on the GPU avoid doing the 2-pass copy + for overlaps on the render ring, and do the single pass slower BLT copy + instead - as since it has to transfer less data it will be faster. + + Reported-by: Ildar Nurislamov + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit 31467b01e3f5ece0c8f8d4c03b52fc3f238b3d7e +Author: Chris Wilson +Date: Wed Jun 11 16:21:13 2014 +0100 + + sna/gen6+: Overlapping bo by definition have compatible depths + + Signed-off-by: Chris Wilson + +commit 0dfe7d93de893b3ead6c3be662b3a17d9335c2ca +Author: Chris Wilson +Date: Wed Jun 11 16:12:26 2014 +0100 + + sna: First copy to overlap temporary must be using GXcopy + + Signed-off-by: Chris Wilson + +commit ad076b394028c40fc6cb88c64b72e46702a936b3 +Author: Chris Wilson +Date: Wed Jun 11 15:49:43 2014 +0100 + + sna: Remove debugging hunk + + Stray hunk in self-copy boxes. + + Signed-off-by: Chris Wilson + +commit a90160dcecf0a3df21a04b4f467e660f69ddae54 +Author: Chris Wilson +Date: Wed Jun 11 15:40:25 2014 +0100 + + sna: Update damage pointer after the implicit reduction + + sna_damage_contains_box() routine implicitly reduces the damage before + performing its check. This may alter and even destroy the damage entry, + so pass in the handle so that it can be updated correctly. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit c9003c6d9602dba682e577ea7ce39990ea378db3 +Author: Chris Wilson +Date: Wed Jun 11 15:29:59 2014 +0100 + + sna: Fix scanout creation routine for old kernels <= 3.11 + + With an old kernel, we would fail to actually mark the display as part + of the scanout domain, but proceed to assign it a fb id. This caused our + asserts to report our bookkeeping error. + + Reported-by: Pavel Ondračka + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79909 + Signed-off-by: Chris Wilson + +commit 5705e66a329273c478f6ecd8f41b8f5633095581 +Author: Chris Wilson +Date: Wed Jun 11 14:34:33 2014 +0100 + + sna: Add some DBG to the memmove path + + Signed-off-by: Chris Wilson + +commit b41a51e0f54c983ef72bc31125419382d666d48c +Author: Chris Wilson +Date: Wed Jun 11 14:22:26 2014 +0100 + + sna: Tweak self-copy boxes to hit the GPU more often + + Signed-off-by: Chris Wilson + +commit b879de6246d3f2e66e9c7e326db93e5ff390159f +Author: Chris Wilson +Date: Wed Jun 11 14:08:31 2014 +0100 + + sna: Recheck source bo after migrating dst (in case of src == dst) + + Signed-off-by: Chris Wilson + +commit 21c150a873a77f983fad29b4517844a0b92e0609 +Author: Chris Wilson +Date: Wed Jun 11 14:00:04 2014 +0100 + + sna: Skip redundant clears + + Signed-off-by: Chris Wilson + +commit e1a4438f074f9cd5eba946cc1172c419c31b03c9 +Author: Chris Wilson +Date: Wed Jun 11 13:59:46 2014 +0100 + + sna/glyphs: Always print some DBG when performing fallback + + Signed-off-by: Chris Wilson + +commit 040eccb9b10d0941c7d81fc9c66c259563370f2a +Author: Chris Wilson +Date: Wed Jun 11 13:18:33 2014 +0100 + + sna: Add some asserts to track redundant damage operations + + Signed-off-by: Chris Wilson + +commit 4fccfe3a516ab8383dfd99ccd7fe1840c88bbc01 +Author: Chris Wilson +Date: Fri Jun 6 08:30:59 2014 +0100 + + sna/gen8: Check offset alignment before using a userptr for RENDER + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79053 + Signed-off-by: Chris Wilson + +commit 1217dbc88e0901e4a657ee51e2e3b7d00bb72b77 +Author: Chris Wilson +Date: Thu Apr 17 21:04:15 2014 +0100 + + sna: Support efficient cursor updates for old machines + + Given a kernel patch to fix coherency of physical objects, we can use a + more efficient method for updating cursors. + + Signed-off-by: Chris Wilson + +commit ee7d2e0a8ef882c1d4e0e77a0148b54dcfbf4236 +Author: Chris Wilson +Date: Fri Jun 6 12:00:35 2014 +0100 + + sna: MST topologies may change on any hotplug event + + As the kernel does not send out an explicit DISCOVER event, we have to + reinspect every connector after every hotplug event to detect topology + changes. + + Signed-off-by: Chris Wilson + +commit 782c920b01d5144125f2fe954e29fd7b07a1913e +Author: Chris Wilson +Date: Thu May 8 08:04:58 2014 +0100 + + sna: Create a stable output name based on MST topology + + In order to provide persistent names for MST devices, which may change + topology dynamically, the kernel exports a PATH blob. We can then use + this path to generate the output name, and so reuse existing XID when a + monitor is plugged back in. + + Based on the patch for -modesetting by Dave Airlie. + Signed-off-by: Chris Wilson + +commit e680e54eab6ffa72e5e1eb6cc0e3fe4b235b06a1 +Author: Chris Wilson +Date: Wed Jun 11 10:48:26 2014 +0100 + + sna: Ignore setting read-only for temporary userptr maps + + Signed-off-by: Chris Wilson + +commit d9bf6f3fecb3d691937da086a5270334c6c0e69a +Author: Chris Wilson +Date: Wed Jun 11 10:35:50 2014 +0100 + + sna: Prefer to operate inplace on the GPU rather than stall on the CPU + + Signed-off-by: Chris Wilson + +commit 277e6ab84bb0c692358a34a76e7962c64efb0362 +Author: Chris Wilson +Date: Wed Jun 11 10:12:01 2014 +0100 + + sna: Discard TearFree damage before checking for an overwriting upload + + Signed-off-by: Chris Wilson + +commit eb9de37daaea45e917fa7f44444a9782070f7333 +Author: Chris Wilson +Date: Wed Jun 11 09:29:50 2014 +0100 + + sna: Silence compiler warnings for discarding const Region points + + Signed-off-by: Chris Wilson + +commit 085141348cfe8386059062a58172855f72d5e5b6 +Author: Chris Wilson +Date: Wed Jun 11 08:39:42 2014 +0100 + + sna: Squelch log messages for fb/pixmap tiling in the default case + + The output is confusing, so hide it unless it is modified by the user. + + Signed-off-by: Chris Wilson + +commit 53c1faa5093f8a0c969e3ebe9f27ee1ce5137e14 +Author: Chris Wilson +Date: Wed Jun 11 07:59:41 2014 +0100 + + sna: Mark the GPU as all damaged when discarding CPU bo during uploads + + Signed-off-by: Chris Wilson + +commit e2bfa715a9e115921263d572b9f4c496b550a494 +Author: Chris Wilson +Date: Tue Jun 10 21:28:32 2014 +0100 + + sna/dri2: Check that the window covers the whole CRTC before xchg + + Fixes TearFre regression from + + commit 3932e97057fca16615adaefbc1eb25a0d51a1d8b [2.99.912] + Author: Chris Wilson + Date: Mon Jun 9 08:58:15 2014 +0100 + + sna/dri2: Allow TearFree flipping to individual CRTC + + Signed-off-by: Chris Wilson + +commit d0f32a9d3afed4ea45644723fa1134957b981125 +Author: Chris Wilson +Date: Tue Jun 10 16:37:24 2014 +0100 + + sna: Cast away compiler warning + + sna_display.c: In function 'has_user_backlight_override': + sna_display.c:595:3: warning: return discards 'const' qualifier from pointer target type [enabled by default] + + Signed-off-by: Chris Wilson + +commit 216beed6dfcb3a8d6b0b480d0281fcadb0cd3036 +Author: Chris Wilson +Date: Tue Jun 10 09:09:30 2014 +0100 + + sna: Expand debugging to cover gen8 BLT variations + + Signed-off-by: Chris Wilson + +commit f19195f7ea317f5601543724c725c4b63fdc3f60 +Author: Chris Wilson +Date: Tue Jun 10 14:25:42 2014 +0100 + + sna: Fix arguments when flipping transformed TearFree outputs + + Signed-off-by: Chris Wilson + +commit c16b2a125929c9027b62c07d47e9602553153eef +Author: Chris Wilson +Date: Tue Jun 10 13:25:57 2014 +0100 + + sna: Tidy a few asserts on the state of crtc->flip_bo + + Signed-off-by: Chris Wilson + +commit fd6aaec33d8ad70544cc02e061c9c5e68cf83414 +Author: Chris Wilson +Date: Tue Jun 10 11:01:38 2014 +0100 + + sna: Handle the user passing "Backlight" "" + + Allow the user to disable the backlight control by passing the empty + string in the xorg.conf. + + Signed-off-by: Chris Wilson + +commit cb7b27a705b477ae1b369786eea13fb14506d54a +Author: Chris Wilson +Date: Mon Jun 2 09:36:13 2014 +0100 + + 2.99.912 snapshot + +commit 52e2aa0939eee3566e4d6ee3a34f8acd93570530 +Author: Chris Wilson +Date: Tue Jun 10 08:49:41 2014 +0100 + + sna: Queue a flip after fixing up a failed flip + + After a flip fails, we try to update the CRTC manually to new fb. + However, the caller is still expecting to receive an event though the + drm device to notify when the flips are complete. In order to maintain + that ABI, we need to queue another flip after the fixup (to the + currently bound fb). + + Signed-off-by: Chris Wilson + +commit 68ac3039e4170b318952213311534cd213cbaff7 +Author: Chris Wilson +Date: Mon Jun 9 22:01:05 2014 +0100 + + sna: Fix the typo in the last commit + + Rewording the sentence and reordering the arguments was a mistake! + + Signed-off-by: Chris Wilson + +commit fdb8f490441b0ba91fdf530b982cedc2f2acf122 +Author: Chris Wilson +Date: Mon Jun 9 21:46:37 2014 +0100 + + sna: Add an extra error message before disabling a CRTC + + One of the error paths to disable a pipe was lacking a log message. + + Signed-off-by: Chris Wilson + +commit c1154ae1070806b8da1aad29f75c9659f2a403df +Author: Chris Wilson +Date: Mon Jun 9 17:04:47 2014 +0100 + + configure: Allow disabling control over the backlight + + Some OS prefer to control the backlight themselves through another + daemon and so do not want X interfering. + + Signed-off-by: Chris Wilson + +commit bb2d5e3696b52835770a62a951f7ed7e51291f88 +Author: Chris Wilson +Date: Mon Jun 9 16:30:15 2014 +0100 + + sna: Defer the copy back from the shadow CRTC bo until we allocate the target + + Signed-off-by: Chris Wilson + +commit b00a60b41736c399f849217626f246e6e7d1f7eb +Author: Chris Wilson +Date: Mon Jun 9 15:03:23 2014 +0100 + + sna: Fix cut'n'paste DBG error + + Signed-off-by: Chris Wilson + +commit 8901a99afb7be4f6f377a8e84e62e5d768c8443d +Author: Chris Wilson +Date: Mon Jun 9 14:56:02 2014 +0100 + + sna/dri2: Avoid trying to flip between bo with different pitches + + It could happen that we create front/back buffers with different + pitches. The kernel refuses to flip between such buffers, and so we will + hit some fallback paths that try to fix up the failed flips. Circumvent + such by avoiding the flip. + + Signed-off-by: Chris Wilson + +commit 16574754a99c4472c1c90c426d9c1665a898f1d6 +Author: Chris Wilson +Date: Mon Jun 9 14:54:26 2014 +0100 + + sna: Fixup normal flips between different pitches + + Apply the manual CRTC fixup in case pageflipping fails. This can happen + if the pitches between the front and back differ for example. + + Signed-off-by: Chris Wilson + +commit 3932e97057fca16615adaefbc1eb25a0d51a1d8b +Author: Chris Wilson +Date: Mon Jun 9 08:58:15 2014 +0100 + + sna/dri2: Allow TearFree flipping to individual CRTC + + Baby step. We first take advantage of TearFree to allow us to redirect a + single CRTC to the DRI2 frontbuffer and so allow a fullscreen game + covering a single monitor to avoid expensive blits when running in a + multi-monitor setup. + + Signed-off-by: Chris Wilson + +commit af3130cbba8375b9060a3a8cef5b03189d01c419 +Author: Chris Wilson +Date: Mon Jun 9 13:13:25 2014 +0100 + + sna: Do not rely on udev_monitor_receive_device() being non-blocking + + The libudev documentation says that is it non-blocking by default, but + experience shows otherwise. + + Reported-by: Sedat Dilek + Signed-off-by: Chris Wilson + +commit 981af18190be772b469761bc124b9f46c19d5093 +Author: Chris Wilson +Date: Sun Jun 8 16:55:07 2014 +0100 + + uxa: Do not FreePixmap(screen->devPrivate) + + Prevent the crash caused by + + commit 444a1f7a8802999e27ecf5f6eb598df2206f7277 + Author: Brendan King + Date: Thu Apr 24 11:37:45 2014 +0100 + + fb: fix screen pixmap leak on server reset + + Call FreePixmap() instead of free() to destroy the screen pixmap in + fbCloseScreen(). + + Signed-off-by: Frank Binns + Reviewed-by: Keith Packard + Signed-off-by: Keith Packard + + Signed-off-by: Chris Wilson + +commit 86f2cae45048158154eb2b1dbb181c3e1d6a8bf7 +Author: Chris Wilson +Date: Sun Jun 8 15:18:34 2014 +0100 + + sna/dri2: DBG compile fix + + Typo in DBG message. + + Signed-off-by: Chris Wilson + +commit 6153141fa6e1328a007efe6862ff2d7b4adaaf83 +Author: Chris Wilson +Date: Sun Jun 8 14:48:20 2014 +0100 + + sna/dri2: Allow xchg to replace the frontbuffer when all outputs are off + + Signed-off-by: Chris Wilson + +commit 9306a148cbf1a2471540f3301136d57e93197593 +Author: Chris Wilson +Date: Sun Jun 8 09:40:19 2014 +0100 + + sna/dri2: Use xchg for offscreen drawables where applicable + + Signed-off-by: Chris Wilson + +commit 22cd7c873edd0b641e54e81d643ec6b0ea921f88 +Author: Chris Wilson +Date: Sun Jun 8 08:46:27 2014 +0100 + + sna/dri2: Explicitly drain the pending event queue before swapping + + As there may be some latency between the wakeup and the queue, do a + final check if there is a pending vblank event before we decide whether + to chain up or perform an immediate flip. + + Signed-off-by: Chris Wilson + +commit 258e0cda1d69f74736d0e0be014996173e275543 +Author: Chris Wilson +Date: Sun Jun 8 08:21:38 2014 +0100 + + sna/dri2: Mark frames under construction + + As we may recurse into the vblank handler whilst waiting for the + TearFree shadow, we need to be careful that we do not queue the frame + from the vblank handler that we are in the process of constructing. + + Signed-off-by: Chris Wilson + +commit eb8f3a9b345c75023b49512c2db57527d906db7f +Author: Chris Wilson +Date: Sun Jun 8 07:45:52 2014 +0100 + + sna/dri2: Check the xchg against the Pixmap size + + As the Window may be resized between the client sending the swap request + and the xchg being processed, we need to validate the swap against the + final target not the buffers supplied originally by the client. + + Signed-off-by: Chris Wilson + +commit fc64ba821749ed0a0197a69d9bae81957aceb55f +Author: Chris Wilson +Date: Sat Jun 7 23:27:49 2014 +0100 + + sna: Restore backlight when switching to VT + + fbcon doesn't adjust the backlight when it takes over. Therefore if X + performs a VT switch whilst its outputs are off, fbcon wakes up with no + backlight and users are unhappy. Make the assumption that whoever takes + over the VT will set the outputs as it desires, and that the failsafe + value is to then turn the backlight to full. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67025 + Signed-off-by: Chris Wilson + +commit ecd80a3a997b11307445c50621d4e86e241a5b22 +Author: Chris Wilson +Date: Sat Jun 7 14:57:10 2014 +0100 + + sna: Fix reporting of TearFree + + The switch was moved after we checked whether pageflips are supported, + but the log message was left in the old location. + + Signed-off-by: Chris Wilson + +commit 035be60f332e4729fb90261605ef6c06a9d9c903 +Author: Chris Wilson +Date: Sat Jun 7 13:26:12 2014 +0100 + + sna: Release CRTC on VT switch + + In order to free up memory and improve our bookkeeping when the X server + is switched away from the current VT, disable the CRTC. + + Signed-off-by: Chris Wilson + +commit 717e00facd27696c6b8a1a6c343b2f94bfa2b59b +Author: Chris Wilson +Date: Sat Jun 7 09:07:16 2014 +0100 + + sna: Allow TearFree to be enabled by default via configure + + Signed-off-by: Chris Wilson + +commit dcb64b55092ea3da6adf357305d65b58d848db7b +Author: Chris Wilson +Date: Sat Jun 7 08:30:38 2014 +0100 + + sna: Fix TearFree for non-compositors + + The tearfree code forgot to update the shadow bo, so after the first + flip it would be rendering to the scanout anyway and flip to itself + periodically. + + Signed-off-by: Chris Wilson + +commit c65fab07402a338f015c2b339e996beca783c2bf +Author: Chris Wilson +Date: Fri Jun 6 22:07:44 2014 +0100 + + sna: Fix no relaxed delta path for gen4+ + + This is for debug purposes only. + + Signed-off-by: Chris Wilson + +commit a378196fddcf3043257a7e56225060e5e36cfa7b +Author: Chris Wilson +Date: Fri Jun 6 16:58:45 2014 +0100 + + sna: Auto-retire upload proxies + + This was disabled in + + commit 9f4f855ba37966fb91d31e9081d03cf72affb154 + Author: Chris Wilson + Date: Mon May 26 07:06:18 2014 +0100 + + sna: Implicit release of upload buffers considered bad + + as retiring the buffers during the command setup could free one of the + earlier bo used in the command. But discarding the snooped bo could + still be advantageous. So restore the automatic discard of upload + proxies, but make sure we only do between operations. + + Signed-off-by: Chris Wilson + Cc: Matti Hämäläinen + +commit 23840bd329cf4da3a4bdd5a1a466125a95473534 +Author: Chris Wilson +Date: Fri Jun 6 16:10:29 2014 +0100 + + sna: Only allow the inplace copy to replace a complete overwritten GPU bo + + And double check after recreating the new GPU bo that is still mappable. + + Signed-off-by: Chris Wilson + +commit 283ff8cbe4137f46cc027dd6aadc69d0270cb33d +Author: Chris Wilson +Date: Fri Jun 6 15:04:25 2014 +0100 + + sna: Rearrange scanout_flush checking to avoid potential crash + + With a shadow, we may never attach a GPU bo to the frontbuffer, so be + careful when checking the scanout not to dereference that NULL pointer. + + Signed-off-by: Chris Wilson + +commit 694ff54aca16ccf39e94d505942eb857b3101d7d +Author: Chris Wilson +Date: Fri Jun 6 13:34:18 2014 +0100 + + sna: Report KMS driver version + + Signed-off-by: Chris Wilson + +commit 0ebcef4f2ebe82e9b90589aa4266a9228e2b5fdb +Author: Chris Wilson +Date: Fri Jun 6 11:39:57 2014 +0100 + + man: Update notes about TearFree + + Signed-off-by: Chris Wilson + +commit 1f943a7d92d0e3a8895ba7d539cfc5e726bcc8b7 +Author: Chris Wilson +Date: Fri Jun 6 11:25:47 2014 +0100 + + sna/dri2: Restore flush on front buffers after swapping bo + + Fallout from commit 8369166349c92a20d9a2e7d0256e63f66fe2682b + Author: Chris Wilson + Date: Wed Jun 4 08:29:51 2014 +0100 + + sna/dri2: Enable immediate buffer exchanges + + We set the flush hint too early, as we may need to swap the GPU bo for a + more appropriate buffer for DRI. + + Signed-off-by: Chris Wilson + +commit c6cd10f536e099277cdc46643725a5a50ea8b525 +Author: Chris Wilson +Date: Thu Jun 5 22:43:37 2014 +0100 + + sna: Hook up a backlight udev monitor for external changes + + Changes to the backlights are notified through uevents. Hooking up a + udev monitor to listen out for external changes to the backlight (e.g. + through ACPI function keys, or by the user writing to + /sys/class/backlight directly) is easier than enabling polling on the + backlight sysfs file using X's select() mechanism. + + Since we listen to backlight changes, we have to be careful not to + confuse the side-effects of disabling connectors (which may cause either + ourselves or the kernel to turn off the backlight) with the user value. + + Many thanks to Alexander Mezin for the suggestion to use udev for + tracking the notifications for external changes to the backlight. + + Reported-by: Alexander Mezin + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79699 + Signed-off-by: Chris Wilson + +commit b545e10c50cbb2dd6f9fd53369667bed0d8f1b51 +Author: Chris Wilson +Date: Thu Jun 5 15:54:32 2014 +0100 + + sna: When the output is off, report the cached backlight value + + Signed-off-by: Chris Wilson + +commit f0b8720807d9c1994e6db91a607efe4711b0d1ca +Author: Chris Wilson +Date: Thu Jun 5 15:31:54 2014 +0100 + + sna: Inline calls to save/restore backlight around output DPMS + + The intertwined logic was a little confusing to read mixed between the + functions, so inline it. + + Signed-off-by: Chris Wilson + +commit 9f7775158341c8384da870e06cab200deddf48c1 +Author: Chris Wilson +Date: Thu Jun 5 15:31:27 2014 +0100 + + sna: Set initial output DPMS state from kernel + + Signed-off-by: Chris Wilson + +commit 9e02fe269dc79ff867d1d2cb3a8673ee2861bd56 +Author: Chris Wilson +Date: Thu Jun 5 15:49:03 2014 +0100 + + sna: Make sure we recompute the vblank interval after reconfiguring the CRTC + + Signed-off-by: Chris Wilson + +commit 51909f37ed6405c38f1c46a4012952be79031994 +Author: Chris Wilson +Date: Thu Jun 5 14:54:55 2014 +0100 + + sna: Skip marking the CRTC as damaged for TearFree + + As we have reorder the application of damage on a TearFree frontbuffer + to before we attach the CRTC, we do not need to then schedule the update + afterwards (until it gets drawn by the client). + + Signed-off-by: Chris Wilson + +commit c7efe88a895a692e5f840562a09dac385508db57 +Author: Chris Wilson +Date: Thu Jun 5 14:50:04 2014 +0100 + + sna: Fix DBG compilation + + Update the DBG to reflect the new arguments to sna_damage_reduce_all() + + Signed-off-by: Chris Wilson + +commit 9566fc0ccc71bc4fcd6bf83b567a41cc5366f5ee +Author: Chris Wilson +Date: Thu Jun 5 12:26:23 2014 +0100 + + sna: Curry parameters to sna_damage_all() + + It is far easily to pass the PixmapPtr into the function and have it + pluck out the width and height than do so in all callers. + + Signed-off-by: Chris Wilson + +commit 1327918f91dce2051b809594db5a3ed555934612 +Author: Chris Wilson +Date: Thu Jun 5 12:04:29 2014 +0100 + + sna: Mark CPU as all damaged when discarding a busy GPU bo + + When we discard a GPU bo, we need to make sure that the remaining + content is marked as only accessible via the CPU shadow pointer. + + Regression from commit 65301412ecf2d55ab55a2d7faeaa048d4ee8b1d0 + Author: Chris Wilson + Date: Sat May 17 20:59:38 2014 +0100 + + sna: Discard active GPU buffers before uploading into them + + Reported-by: Jan Alexander Steffens + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79517 + Signed-off-by: Chris Wilson + +commit 8369166349c92a20d9a2e7d0256e63f66fe2682b +Author: Chris Wilson +Date: Wed Jun 4 08:29:51 2014 +0100 + + sna/dri2: Enable immediate buffer exchanges + + The primary benefit of this is avoid the extra blit when using a + compositor and instead propagate the compositor flip on the frontbuffer + to the scanout, or equivalently allows a fullscreen game to flip onto + the scanout without intervention by TearFree. + + Signed-off-by: Chris Wilson + +commit 08148896196443a8582c30b47ff546acca78d69c +Author: Chris Wilson +Date: Tue Jun 3 15:48:55 2014 +0100 + + configure: XORG_DRIVER_CHECK_EXT does not create CFLAGS/LIBS variables + + XORG_DRIVER_CHECK_EXT only adds the package name to the list of + REQUIRED_MODULES (which is later passed to pkg-config). For our optional + dependencies, we must do a later call to pkg-config to verify the + package is available and then remember to include the includes with the + CFLAGS. + + Signed-off-by: Chris Wilson + +commit 0c81041e9b42f9df0c86c88c8648dd20ed26d0ab +Author: Chris Wilson +Date: Tue Jun 3 15:39:50 2014 +0100 + + configure: Remove xf86driproto from REQUIRED_MODULES + + We only depend upon the original DRI1 infrastructure when building i810 + with DRI support. So unless that is true, do not throw an error if the + legacy protocol is absent. + + Signed-off-by: Chris Wilson + +commit 689ee76a14da7e5f98997ac427f457af840dea3f +Author: Adam Jackson +Date: Tue Jun 3 10:26:46 2014 -0400 + + configure: Don't link the driver against libX11 + + 78dc0c04745ad4485b994f67833f4a155749f01d added REQUIRED_MODULES to the + driver link line for... some reason. That pulled in the libs from the + XF86DRI check, which near as I can tell has always been wrong, all of + the other extension checks just look for the protocol module and + xextproto doesn't define dri1 protocol in any case. + + Signed-off-by: Adam Jackson + +commit 8297c969ae749ef58d259b2ded2231b928efba43 +Author: Chris Wilson +Date: Tue Jun 3 09:47:27 2014 +0100 + + sna: Replace the bo for tiled uploads if not suitable and being replaced + + Signed-off-by: Chris Wilson + +commit 1c55d0447dba5bbde5be3903b273e04e3c9d084f +Author: Chris Wilson +Date: Tue Jun 3 12:43:51 2014 +0100 + + sna: Allow replacements to cancel operations between both bo under a Pixmap + + Signed-off-by: Chris Wilson + +commit a82bfb033448eb61bf8cc7f5358be019f0cc28e6 +Author: Chris Wilson +Date: Tue Jun 3 09:28:24 2014 +0100 + + sna: Discard unwanted damage when promoting to a full CPU migration + + Signed-off-by: Chris Wilson + +commit 4cafd1fbb1a2441a9ba5dac7f2a0e1b3f5957c62 +Author: Chris Wilson +Date: Mon Jun 2 16:01:10 2014 +0100 + + sna: Fix early return in download using the GPU + + In commit 961139f5878572ebea268a0bbf47caf05af9093f + Author: Chris Wilson + Date: Fri May 30 09:45:15 2014 +0100 + + sna: Use manual detiling for downloads + + the code for deciding when to use the GPU was refactored into a new + function that also performed the transfer, but failed to notice the + early return. + + Signed-off-by: Chris Wilson + +commit d6a412812c19fe4698752d2589ead4965048b107 +Author: Chris Wilson +Date: Mon Jun 2 10:32:11 2014 +0100 + + sna: Use CPU mmappings for linear uploads + + The other half of the commit that accidentally got included with + + commit bb49222a514b1d6041f3d9530a22f5701377118b + Author: Chris Wilson + Date: Mon Jun 2 08:25:52 2014 +0100 + + sna: Add DBG hints for using inplace CPU mmappings + + Signed-off-by: Chris Wilson + +commit 454367f5945dd17a7cfc566b1986654fc976cabe +Author: Chris Wilson +Date: Mon Jun 2 09:25:01 2014 +0100 + + Only enable the new Cursor API for the next pre-release of Xorg + + Make sure we can compile against the pre-release tarballs at the expense + of an innocuous compile warning if compiled against xserver.git + + Signed-off-by: Chris Wilson + +commit ff36e1f7546e0ac4d6e831e5cf8d1317792ed7af +Author: Keith Packard +Date: Tue Nov 19 15:20:44 2013 -0800 + + uxa: Add Present extension support + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + + Conflicts: + configure.ac + src/uxa/intel.h + src/uxa/intel_driver.c + +commit 14ff08c2827d36f7f08256dc57b84aaf80d17ab4 +Author: Keith Packard +Date: Tue Nov 19 23:20:38 2013 -0800 + + uxa: Restructure DRM event handling. + + This refactors the drm interrupt handling logic quite a bit, both to + allow for either DRI2 or Present handlers, but also to eliminate + passing pointers through the kernel. Passing pointers left the kernel + holding the only reference to some internal X server data structures. + + After a server reset, the X server would end up using stale pointers + stored in those structures. Using simple integers makes it possible to + empty the queue of pending interrupt data and then ignore the stale + kernel data. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit 7f28b1cfa20eb4fc11c1a9c1e0c0fac7847be72e +Author: Keith Packard +Date: Tue Nov 19 22:58:33 2013 -0800 + + uxa: Support 64-bit MSC values. Handle kernel vageries about MSC reporting + + The kernel sometimes reports bogus MSC values, especially when + suspending and resuming the machine. Deal with this by tracking an + offset to ensure that the MSC seen by applications increases + monotonically, and at a reasonable pace. + + Also, provide a full 64 bits of MSC value by noticing wrapping and + tracking the high 32-bits of MSC separately. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + + Conflicts: + src/uxa/intel_dri.c + +commit dd6db82680b05cde4a47116b7096c054f3837e20 +Author: Chris Wilson +Date: Fri May 9 20:26:19 2014 +0100 + + uxa: Add DRI3 and miSyncShm support + + Based on a patch by Keith Packard. + + Signed-off-by: Chris Wilson + +commit 975b9798be77b30cbed485583d0ccb48318708f7 +Author: Chris Wilson +Date: Wed May 21 08:58:24 2014 +0100 + + sna: Add support for Present + + Signed-off-by: Chris Wilson + +commit d8eb87f84f88ad2df42c6fed1d93df76589a14e3 +Author: Chris Wilson +Date: Thu May 8 16:25:32 2014 +0100 + + sna: Add support for DRI3 + + Signed-off-by: Chris Wilson + +commit 0fbe8995d51b4643f1cf06c07da8b4b5ac5ae7c3 +Author: Chris Wilson +Date: Thu May 22 11:17:35 2014 +0100 + + sna: Relax tiling height restrictions + + Only force the even-tile-row alignment if we have an old GPU with an old + kernel that doesn't perform conservative alignment for us (as required). + + Signed-off-by: Chris Wilson + +commit 67b37332bd45dd4cea297107bfdc9df21984fdcd +Author: Chris Wilson +Date: Tue May 20 15:37:13 2014 +0100 + + intel-virtual-output: Add DRI3 xfer path + + Just as proof-of-principle. + + Signed-off-by: Chris Wilson + +commit 9cf6cd9726ed5ba73bb8c38c06f7b5c78706309b +Author: Chris Wilson +Date: Wed May 21 12:52:18 2014 +0100 + + Add rudimentary tests for Present + + Signed-off-by: Chris Wilson + +commit 6ab6734369fbd902a23109f4c3626df9d529891c +Author: Chris Wilson +Date: Fri May 9 11:08:15 2014 +0100 + + Add rudimentary tests for DRI3 + + This is a simple little test to create a pixmap from a local bo, copy it + to a normal pixmap, then read it back by importing it into anther local + bo. It tests the fundamental mechanisms of opening a DRI3 render device, + importing into pixmaps, exporting into /buffers and a read-barrier. + + Signed-off-by: Chris Wilson + +commit d6240d197be1e752c0de26fbf84fc8fa8d55383c +Author: Chris Wilson +Date: Wed May 14 07:55:03 2014 +0100 + + intel: Clear structs for valgrind + + When probing the module, clear structs passed into unknown ioctls to + keep valgrind quiet. + + Signed-off-by: Chris Wilson + +commit d27c948a4382c4024ce5e76f1ea82103fc8e9d66 +Author: Chris Wilson +Date: Fri May 9 13:58:37 2014 +0100 + + intel: Add common routines and configure probing for DRI3 + + Signed-off-by: Chris Wilson + +commit 8a02886a24c8699374a39a9363e72bec0e7bbe30 +Author: Chris Wilson +Date: Fri May 30 21:09:34 2014 +0100 + + sna/dri2: Use real async flips + + Presuming that we have both kernel support and Xorg support, of course. + + Signed-off-by: Chris Wilson + +commit c17d704a5baa0c902994f035d3da39d77d31fef3 +Author: Chris Wilson +Date: Fri May 30 21:21:00 2014 +0100 + + sna: Enable kernel support for asynchronous flips + + If a flip fails, attempt to restore the previous working configuration + (using a modeset) then disable further flipping. + + Signed-off-by: Chris Wilson + +commit c95a4002d1d27937731c59e84254ccb3b1246ccd +Author: Chris Wilson +Date: Sun Jun 1 08:44:13 2014 +0100 + + sna/dri2: Hide MSC reported as going backwards + + OML_sync_control mandates that MSC must be monotonic, so if the kernel + reports that they go backwards, lie. + + Signed-off-by: Chris Wilson + +commit b1c07c20a371795a8dc4102f83fe542d62d8a4e6 +Author: Chris Wilson +Date: Sat May 31 21:58:13 2014 +0100 + + sna/dri2: Always force the async blits to be immediate + + Signed-off-by: Chris Wilson + +commit 1b5f91e14226799ef4ec6461de93fa9193ef2ebc +Author: Chris Wilson +Date: Sat May 31 21:41:45 2014 +0100 + + sna/dri2: Decouple spent flip + + If the flip is already completed before we finish the previous flip, the + drawable has been replaced already and we can unchain the flip queue. + + Signed-off-by: Chris Wilson + +commit 0ee1940a4ffc1901534fa3bf15adb427527a8c20 +Author: Chris Wilson +Date: Sat May 31 13:21:04 2014 +0100 + + sna/dri2: Mark queued flip MSC as the one after next + + Signed-off-by: Chris Wilson + +commit 2df4466adae7f299eac3f7fd3e5f33ee4b22e53f +Author: Chris Wilson +Date: Fri May 30 13:27:32 2014 +0100 + + sna/gen8: Clear all URB push constant allocations + + A little paranoia to clear the unused portion of the URB and dedicate it + to VS entries. + + Signed-off-by: Chris Wilson + +commit 1618d6cfa63e31ebaedadf575dcbdf5b07451bde +Author: Chris Wilson +Date: Fri May 30 12:14:40 2014 +0100 + + sna/gen8: Set GT level + + We use the GT level to decide how favourable it is to use the GPU in + various circumstances, now set it. + + Signed-off-by: Chris Wilson + +commit bb49222a514b1d6041f3d9530a22f5701377118b +Author: Chris Wilson +Date: Mon Jun 2 08:25:52 2014 +0100 + + sna: Add DBG hints for using inplace CPU mmappings + + Signed-off-by: Chris Wilson + +commit 487df2e7b105b996c4d620ec2af6331ebc167f47 +Author: Chris Wilson +Date: Mon Jun 2 08:30:57 2014 +0100 + + sna: Silence a DBG compiler warning + + kgem.c: In function '_kgem_submit': + kgem.c:3243:12: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] + write(fd, kgem->batch, batch_end*sizeof(uint32_t)); + + Signed-off-by: Chris Wilson + +commit ffbe0aa1851c35cc2403633ca493e9fc6a471fd4 +Author: Chris Wilson +Date: Fri May 30 18:41:39 2014 +0100 + + sna: Reuse the first scanout bo + + The path of last resort is meant to reuse the first scanout bo if they + all busy (since it will be the oldest). It chased a dangling pointer + instead. + + Signed-off-by: Chris Wilson + +commit 40fe1f2c09a98ac75b05db3663d29ee1a64ed280 +Author: Chris Wilson +Date: Fri May 30 18:30:47 2014 +0100 + + sna: Do not allow imported buffers to be cached + + Signed-off-by: Chris Wilson + +commit fc1f9b91ae2c761e4b126daecab13e13ae2534d3 +Author: Chris Wilson +Date: Fri May 30 18:11:16 2014 +0100 + + sna: Mark all caches for expiration + + Signed-off-by: Chris Wilson + +commit 3dac734bb0fb0ae1febfef9a9289cf830a87be1c +Author: Chris Wilson +Date: Fri May 30 10:31:37 2014 +0100 + + test: Only compute the masked pixel value if depth!=32 + + Minor saving for when we use a8r8g8b8. + + Signed-off-by: Chris Wilson + +commit 961139f5878572ebea268a0bbf47caf05af9093f +Author: Chris Wilson +Date: Fri May 30 09:45:15 2014 +0100 + + sna: Use manual detiling for downloads + + If we can CPU mmap the GPU bo, prefer to do so for migration to the CPU + as this saves an extra serialisation step. + + Signed-off-by: Chris Wilson + +commit 93d3df493d359f76ea710441d891a0333e755fb8 +Author: Chris Wilson +Date: Fri May 30 22:49:05 2014 +0100 + + sna: Unexport kgem_get_unique_id() + + This should always be set during bo creation + + Signed-off-by: Chris Wilson + +commit 792584fa740dbc81b72fd4f4bdf27d65b9c046cf +Author: Chris Wilson +Date: Wed May 28 14:00:26 2014 +0100 + + sna/dri2: Reorder declarations to compile on old Xorg + + Signed-off-by: Chris Wilson + +commit 562c47fc21b9029ebff29b53d2be590df4329264 +Author: Chris Wilson +Date: Wed May 28 12:51:18 2014 +0100 + + Silence CLang (almost) + + Fix up all the warnings about implicit enum conversions. The + container_of() macro remains defunct. + + Signed-off-by: Chris Wilson + +commit 6282fc9d0d3b2899be52ca4a43a3d9313e9049a6 +Author: Chris Wilson +Date: Wed May 28 10:42:58 2014 +0100 + + sna/dri2: Fix the continuation mode for old style triple buffering + + Otherwise we end up sending too many SwapCompletes back to the client + and confusing ourselves. + + Signed-off-by: Chris Wilson + +commit 916354164bcb149e1323a3219d85e7bba6e61e04 +Author: Chris Wilson +Date: Tue May 27 20:16:55 2014 +0100 + + sna: Fix the depth/format on the temporary shadow Pictures + + When scaling the output, we re-render onto the scanout using a call to + Composite, for which we create temporary Pictures. In most cases, the + mismatching depth/format goes unnoticed, but along one particular + fallback path, we use those to create a new Picture but the mismatching + format results in a segfault. + + Reported-by: Matti Hämäläinen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79320 + Signed-off-by: Chris Wilson + +commit d8360bd74f5b62a27c019c65ed9001cac8bf43ed +Author: Chris Wilson +Date: Tue May 27 20:14:02 2014 +0100 + + sna: Handle bad picture format/depth mismatches + + Scaling the output feed in an invalid picture->format/depth combination + which causes the fallback downsampling function to explode. Whilst this + is a bug in the higher layer, we can handle the error anyway. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79320 + Signed-off-by: Chris Wilson + +commit 93b319cf9a355e8400b864046cdb4cfb56b657a0 +Author: Chris Wilson +Date: Fri May 23 13:16:50 2014 +0100 + + uxa: Silence the compiler over a couple of unused variables + + intel_driver.c: In function 'I830LeaveVT': + intel_driver.c:1085:24: warning: unused variable 'intel' [-Wunused-variable] + intel_screen_private *intel = intel_get_screen_private(scrn); + ^ + intel_driver.c: In function 'I830EnterVT': + intel_driver.c:1102:24: warning: unused variable 'intel' [-Wunused-variable] + intel_screen_private *intel = intel_get_screen_private(scrn); + + Signed-off-by: Chris Wilson + +commit e6ee0679374f8fc80cb34693f80affe6ea676ddb +Author: Chris Wilson +Date: Fri May 23 14:29:42 2014 +0100 + + uxa: Silence compiler for warnings in Cursor API changes + + Signed-off-by: Chris Wilson + +commit 4321e8decd7be9daaa49c6ab4e8bb9bd66faae31 +Author: Chris Wilson +Date: Fri May 23 14:29:42 2014 +0100 + + sna: Silence compiler for warnings in Cursor API changes + + The API changed again in the RC, so update to keep the compiler quiet. + At the same time, protect against the ARGB_CURSOR struct changes. + + Signed-off-by: Chris Wilson + +commit 2a0dc7ed4961d5bda08bb583a7a6a2cc633b27e4 +Author: Chris Wilson +Date: Mon May 26 08:23:45 2014 +0100 + + sna/dri2: Move scanout processing from frame event to global + + The scanout is a global property, track it as so. The primary benefit to + this is it strengthens our assertions that we never hand out an active + scanout for use as a back buffer. + + Signed-off-by: Chris Wilson + +commit 05f149285b429c7b3f25ac8049477230aaef512c +Author: Chris Wilson +Date: Sun May 25 07:14:53 2014 +0100 + + sna/dri2: Defer reallocation of backbuffer until request + + If we defer the reallocation of the backbuffer until the client requests + the set of current buffers (with GetBuffers), then we can often avoid + allocating the fresh backbuffer as the flip often retires before the + client is ready. + + Signed-off-by: Chris Wilson + +commit e8d8f754ebf77f17a4666c8f649907bee50313bd +Author: Chris Wilson +Date: Fri May 23 15:52:20 2014 +0100 + + sna/dri2: Make the swap-limit transitions more obvious + + Signed-off-by: Chris Wilson + +commit 9f4f855ba37966fb91d31e9081d03cf72affb154 +Author: Chris Wilson +Date: Mon May 26 07:06:18 2014 +0100 + + sna: Implicit release of upload buffers considered bad + + Currently upload buffers are automatically decoupled when the buffer is + retired. As retiring can happen during command setup after we have + selected which bo to render with, this can free the bo we plan to use. + Which is bad. + + Instead of making the release of upload buffers automatic, we manually + check whether the buffer is idle before use as a source to consider + scrapping it and replacing it with a real GPU bo. This is likely to keep + upload buffers alive for longer (limiting reuse between Pixmaps but + making reuse of the buffer within a Pixmap more likely) which is both + good and bad. (Good - may improve the content cache, bad - may increase + the amount of memory used by upload buffers for arbitrary long periods.) + + Reported-by: Matti Hämäläinen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79238 + Signed-off-by: Chris Wilson + +commit b508d8f3318c42a2a87b7731789b1d03610e9b46 +Author: Chris Wilson +Date: Mon May 26 06:54:03 2014 +0100 + + sna: Assert that we do not replace active IO buffers + + References: https://bugs.freedesktop.org/show_bug.cgi?id=79238 + Signed-off-by: Chris Wilson + +commit 605fcd9050efc816ac8163e8d626f466d98261c2 +Author: Chris Wilson +Date: Fri May 23 13:34:38 2014 +0100 + + sna/dri2: Handle allocation failure adding frame events gracefully + + Now that we do not preallocate the storage for the chain in the Window + devPrivates, we need to check for an allocation failure. + + Signed-off-by: Chris Wilson + +commit 36a4a654da87b22f7ce31d1ca99389cedb57eee8 +Author: Chris Wilson +Date: Fri May 23 12:48:10 2014 +0100 + + sna/dri2: Tidy add/remove chain to use the common DRI2 private + + The code is more readable directly updating the private rather than + hiding the pointer chasing through the opaque lookups. + + Signed-off-by: Chris Wilson + +commit 417997f3892b3a5fe43f5951dbde1476092ec82c +Author: Chris Wilson +Date: Fri May 23 12:40:10 2014 +0100 + + sna/dri2: Handle offscreen Window and Pixmap with CRTC tracking + + Signed-off-by: Chris Wilson + +commit d3781e19cfc3edf61b69617cd60da1e421de8ffc +Author: Chris Wilson +Date: Fri May 23 11:16:56 2014 +0100 + + test/dri2: Restore original configuration after testing + + Signed-off-by: Chris Wilson + +commit 1d6106c2893f2783611715960a0f5099ef54b4a0 +Author: Chris Wilson +Date: Fri May 23 10:11:10 2014 +0100 + + sna/dri2: Combine the DRI2 Window privates together into a single struct + + Signed-off-by: Chris Wilson + +commit d6c4e72f1a8008818fc0e5c19c9dc147f1794777 +Author: Chris Wilson +Date: Fri May 23 10:03:39 2014 +0100 + + sna/dri2: Free the private CRTC tracker on each window + + Remember to clean up our privates when the window is destroyed. + + Signed-off-by: Chris Wilson + +commit 43fd06ee7d95db4114ce7b0261685380a48a8708 +Author: Chris Wilson +Date: Fri May 23 09:03:17 2014 +0100 + + sna/dri2: Adjust current msc / target seq between CRTCs + + The target_msc supplied by the client is required to be monotonic. Since + the client does not know which CRTC the window is on, they do not + control from which pipe we derive the MSC, and so we need to adjust the + hardware values such that the client only ever sees a monotonic value. + + Signed-off-by: Chris Wilson + +commit c8decdbccdefa87b635d871a8295608961f0d22e +Author: Chris Wilson +Date: Fri May 23 09:13:31 2014 +0100 + + test/dri2: Check validity of MSC across CRTC + + Signed-off-by: Chris Wilson + +commit a6613a8fe3908433ee33a167f57a0fae4e785a22 +Author: Chris Wilson +Date: Thu May 22 23:48:20 2014 +0100 + + sna/dri2: Queue the flip immediately for the next frame + + If we compute that we want to flip on the next frame, queue it + immediately rather than take a round trip through the kernel and risk + missing the vblank. + + Signed-off-by: Chris Wilson + +commit 24443c6c897278a8a196bf4a8df9fab4485f38b4 +Author: Chris Wilson +Date: Thu May 22 22:47:35 2014 +0100 + + sna/dri2: Tidy computation of target sequence + + Signed-off-by: Chris Wilson + +commit a767ad2e50a503e2b979c976a502ff358064b820 +Author: Chris Wilson +Date: Thu May 22 21:18:10 2014 +0100 + + sna/dri2: Use the timestamps stored on the CRTC + + Now that we store the information for the swap completion on the CRTC, + we don't need to pass it around inside the frame event. + + Signed-off-by: Chris Wilson + +commit 5d80af306677b6d0c52487707bbbcf8de065803b +Author: Chris Wilson +Date: Thu May 22 13:04:31 2014 +0100 + + sna/dri2: Tweak flip continuation + + Minor tidying to the returned target_msc and a useful assertion. + + Signed-off-by: Chris Wilson + +commit 8d1e9afb60a61bf490a282a16db1c15a9ad7d077 +Author: Chris Wilson +Date: Thu May 22 12:34:05 2014 +0100 + + intel-virtual-output: Probe after claiming virtual output + + Rerun a detection cycle after claiming the virtual output so that it is + hidden again. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=78293 + Signed-off-by: Chris Wilson + +commit 0f0cd87c66a4e373ab9b26626514d43b5f4978e5 +Author: Chris Wilson +Date: Thu May 22 10:04:09 2014 +0100 + + sna/dri2: DBG fixes + + Update the DBG statements to match current code. + + Signed-off-by: Chris Wilson + +commit 80dfbaa3c39e1c56aaa9f8951e3bbcc30a9b748d +Author: Chris Wilson +Date: Thu May 22 00:24:07 2014 +0100 + + sna/dri2: Move fixed array allocations to per-crtc + + Replace the fixed size MAX_PIPES array by moving the vblank handling to + per-crtc. + + Signed-off-by: Chris Wilson + +commit 9b21237a1caa369133e6ba972e2ec39feac21bcc +Author: Chris Wilson +Date: Wed May 21 23:40:36 2014 +0100 + + sna/dri2: Maintain sequence calculation in 64bits + + Avoid casting down to 32bits at the begining of the calculation to only + then compare against the full 64bit values later. + + Signed-off-by: Chris Wilson + +commit c548f231c1d59f578dfb113c549b5b6e015e7c5a +Author: Chris Wilson +Date: Wed May 21 23:35:19 2014 +0100 + + sna/dri2: Fix WaitMSC to maintain the vblank counters + + Fix WaitMSC to also use 64 bit counters and maintain the last vblank + notifications. + + Signed-off-by: Chris Wilson + +commit 1f237bb6db9724358eca0467362c03dc6a41dc4a +Author: Chris Wilson +Date: Wed May 21 23:02:52 2014 +0100 + + sna/dri2: Apply a margin of error to the sequence wrap detection + + If we have a queue of events, we may set the msc from a recent vblank + query only to then process an older vblank event and declare the counter + wrapped. + + Signed-off-by: Chris Wilson + +commit 00d9396f6bf0bbbdfca7cdb1cbdbde8f0b2ad59c +Author: Chris Wilson +Date: Wed May 21 20:00:56 2014 +0100 + + sna: Fix attachment of the default monitor to the first output + + Broke during code motion in + + commit add84cd8a8dc6d285912d0ea3a3a3e7faa9e0942 + Author: Chris Wilson + Date: Fri May 2 13:21:02 2014 +0100 + + sna: Perform dynamic connector discovery + + Reported-and-tested-by: Jay Little + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79015 + Signed-off-by: Chris Wilson + +commit 5168a160a1385c23d275d616f2649d5cae7c15d9 +Author: Chris Wilson +Date: Wed May 21 19:16:32 2014 +0100 + + sna/dri2: Decouple queued events + + Becareful when reaping a chain on a destroyed window as some events may + be queued ahead. + + Signed-off-by: Chris Wilson + +commit 66e14c96d0ddede90e36084a80a97c3f16c2b386 +Author: Chris Wilson +Date: Wed May 21 18:38:36 2014 +0100 + + sna/dri2: Limit pending swaps to 1 when queueing a future blit + + Signed-off-by: Chris Wilson + +commit bf4475d29de589a0d0e71dfb895d19a635f8cc3e +Author: Chris Wilson +Date: Wed May 21 11:31:29 2014 +0100 + + sna/dri2: Tidy conditional use of XORG_CAN_TRIPLE_BUFFER + + Signed-off-by: Chris Wilson + +commit 0b3ea29727075bf2b0d86bbeca7dd78201936913 +Author: Chris Wilson +Date: Wed May 21 08:26:21 2014 +0100 + + sna/dri2: Tidy recording of the last swap sequence number and time + + Signed-off-by: Chris Wilson + +commit 183a0728ba52be9d052f5a5f6e6b54c4a9ee8253 +Author: Dave Airlie +Date: Wed May 21 12:41:58 2014 +1000 + + uxa: fix getmsc to not fail hard + + If some outputs go away we race with this call and apps + get X errors and fall over. Do what SNA does and don't + bother trying. + + Signed-off-by: Dave Airlie + +commit 2dbe76c4925e02b8ec20b986069e2ff38cea5bba +Author: Chris Wilson +Date: Wed May 21 07:38:35 2014 +0100 + + sna/dri2: Tidy computation of 64bit ust + + Signed-off-by: Chris Wilson + +commit a82f6a7594ee13170aba5bac7fb57cd5550b27ee +Author: Chris Wilson +Date: Tue May 20 12:20:38 2014 +0100 + + sna/dri2: Client cannot be NULL, so drop the checks + + Signed-off-by: Chris Wilson + +commit c548427e6d3a3fb50acec4b405b9d0ea977d3cc9 +Author: Chris Wilson +Date: Tue May 20 16:36:31 2014 +0100 + + sna: Only mark the scanout as being busy for writes (not solitary reads) + + Signed-off-by: Chris Wilson + +commit 61df0ffc0be8d934d86ac45c67da910479998cc7 +Author: Chris Wilson +Date: Tue May 20 12:07:50 2014 +0100 + + sna/dri2: Verify that the reference pipe is still active for flipping + + We rely on the reference pipe to drive the event wake up. If we issue a + deferred flip, there is a chance that the user could rearrange the + screen on another crtc whilst otherwise preserving the screen geometry. + + Signed-off-by: Chris Wilson + +commit 197ab0cda06c44aa1a2b17bf69ac08612811b107 +Author: Dave Airlie +Date: Tue May 20 07:45:14 2014 +0100 + + uxa: fix pageflips on 3 head scenarios + + While fixing up UXA for MST I eventually fell over this bug. + + Signed-off-by: Dave Airlie + [ickle: replace constant with macro to track pipe-dependent code] + +commit bfd0e41d5c7b8bff28ff429b26f4c977e4c37d12 +Author: Chris Wilson +Date: Mon May 19 12:31:49 2014 +0100 + + sna: Fix assertions for combining shadow transforms and TearFree + + When the RandR shadow buffer is enabled we set the sna_crtc->transform + flag. We set the crtc->transform_in_use only when coordinate transforms + are required - i.e. we may enable the shadow buffer if a CRTC is out of + bounds, but otherwise has no transformation. That confused the asserts. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 1a84875c21b7113f55e6ce0c4a1f914524aa3f97 +Author: Chris Wilson +Date: Fri May 16 15:05:31 2014 +0100 + + sna: Switch iterators over to real CRTCs only + + Many loops only want to walk the real CRTCs, so update the loop bounds + to be explicit and assert that they are the real ones. + + Signed-off-by: Chris Wilson + +commit 65301412ecf2d55ab55a2d7faeaa048d4ee8b1d0 +Author: Chris Wilson +Date: Sat May 17 20:59:38 2014 +0100 + + sna: Discard active GPU buffers before uploading into them + + Signed-off-by: Chris Wilson + +commit f5e43058465d33025d99d83927d1ce6a8e103ff9 +Author: Chris Wilson +Date: Fri May 16 22:45:45 2014 +0100 + + sna: Do not mark an upload as a potential replace if the dst is pinned + + This saves us from trying to optimise for an operation that cannot + happen as we cannot replace the destination buffer. + + Signed-off-by: Chris Wilson + +commit df297e9fafe1a7de1036f3151f93de67661c2a4e +Author: Chris Wilson +Date: Fri May 16 18:20:06 2014 +0100 + + sna: Userptr lands upstream, enable. + + No longer an optional feature of an experimental kernel! + + Signed-off-by: Chris Wilson + +commit 89e8f2b35bbbcaac23dd1d3fc42e83d8214a9130 +Author: Chris Wilson +Date: Fri May 16 10:14:57 2014 +0100 + + sna/dri2: Update the swap type for chained flips + + We stash the pending flip mode into the closure, but failed to copy that + over to the right field when continuing with a chain of flips. The + impact was that we would fail to issue the required SwapComplete to + unblock the clients. + + Fixes regression from + commit 96ce362ba40bf9560fb1aa27a6ae5fdd2a8bd428 + Author: Chris Wilson + Date: Tue May 13 09:46:45 2014 +0100 + + sna/dri2: Do not rate-limit vblank=0 swaps + + Reported-by: francisbrwn + Signed-off-by: Chris Wilson + +commit e73d51247be5018fe53346f991e2f178c917cb13 +Author: Chris Wilson +Date: Thu May 15 23:00:53 2014 +0100 + + sna/video: Only migrate the destination window + + By using move-area-to-gpu and specifying that we overwrite the target + area, we can optimize away any needless damage migration. + + Signed-off-by: Chris Wilson + +commit 10c18b1a4631ebab5508f4308c73129f2111e964 +Author: Chris Wilson +Date: Thu May 15 21:50:41 2014 +0100 + + intel-virtual-output: Mark the source SHMPixmap as writeable + + This is fortunately a no-op, as it gets initialized to zero already + (that is the pixmap is writeable). However, we may as well do the right + thing... + + Signed-off-by: Chris Wilson + +commit b21fc65b23fcbb2b9a04eb92e3719d88e2d026dc +Author: Chris Wilson +Date: Thu May 15 11:23:16 2014 +0100 + + intel: Update PCI IDs for Cherryview + + Copied from kernel commit 7d87a7f709650bde4d7d63117f25ee1c095da5dd + Author: Ville Syrjälä + Date: Wed Apr 9 18:19:04 2014 +0300 + + srm/i915/chv: Add Cherryview PCI IDs + + and also includes non-functional changes from + + commit fd3c269f8ff940cc0fbb3b7f7e84c0572f6f759a + Author: Zhao Yakui + Date: Thu Apr 17 10:37:35 2014 +0800 + + drm/i915: Split the BDW device definition to prepare for dual BSD rings on BDW GT3 + + Signed-off-by: Chris Wilson + +commit 2afeef0c3ffeae768198fc08c9f365ccd28b7f5d +Author: Chris Wilson +Date: Thu May 15 11:28:48 2014 +0100 + + sna: Mark the CHV vsync method as unknown + + Similar to the story with Baytrail, vsync is a lost art. + + Signed-off-by: Chris Wilson + +commit d33e77d58a6f6f23e87943530197f8dc2b076981 +Author: Chris Wilson +Date: Fri May 16 09:59:25 2014 +0100 + + sna: Handle driver failures more gracefully + + Avoid busy-spinning waiting for the cache to expire after a failure. Try + to free up any overdue expiration, then if we still fail, we free the + entire cache. Currently, it would spin over the expiration until all + items were overdue and then freed. + + Signed-off-by: Chris Wilson + +commit 0625185f4772f1c7f8e8d7f265432fd77cdd27fc +Author: Chris Wilson +Date: Wed May 14 12:40:18 2014 +0100 + + intel-virtual-output: Make it possible to disable building via configure + + Signed-off-by: Chris Wilson + +commit c179003b10845b43a7a8958a99b1bf1c6617252c +Author: Chris Wilson +Date: Wed May 14 16:15:24 2014 +0100 + + sna/dri2: Ensure new immediate blits are queued behind outstanding swaps + + OML_sync_control: + If there are multiple outstanding swaps for the same window, at most + one such swap can be satisfied per increment of MSC. The order of + satisfying outstanding swaps of a window must be the order they were + issued. + + The only challenge is to keep both this behaviour and vblank_mode=0 + benchmarking. + + Signed-off-by: Chris Wilson + +commit 84d0790453089be5d1034037065df1ea37ad48fe +Author: Chris Wilson +Date: Wed May 14 11:37:51 2014 +0100 + + sna: After disabling the TearFree shadow, flush any pending flips + + If we complete a flip after resizing and recreating the TearFree shadow, + we may process the flip completion events whilst the output is only + partially reconfigured. + + Signed-off-by: Chris Wilson + +commit 68181f0b530934d74f48cb36022c17b29a76cb75 +Author: Chris Wilson +Date: Wed May 14 07:46:43 2014 +0100 + + sna/dri2: Carefully check for a completed swap + + We have to open-code kgem_bo_is_busy() in order to avoid prematurely + retiring the rq->bo. The unfortunate outcome here is that the bo may be + recycled for a new batch before it is finally released from the request. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 9f76133e71f1a7cb44ed2f98762ba8626f1e85e6 +Author: Chris Wilson +Date: Tue May 13 12:46:39 2014 +0100 + + sna/dri2: Tighten reporting of faked flip events + + GetDrawableMSC is specified as returning the frame counter and timestamp + of the last flip event associated with the drawable, not the current + hardware timestamp. + + Signed-off-by: Chris Wilson + +commit 96ce362ba40bf9560fb1aa27a6ae5fdd2a8bd428 +Author: Chris Wilson +Date: Tue May 13 09:46:45 2014 +0100 + + sna/dri2: Do not rate-limit vblank=0 swaps + + Signed-off-by: Chris Wilson + +commit b7316feeda552a88245dadde9dadd9b40b8a4992 +Author: Chris Wilson +Date: Wed May 14 07:46:00 2014 +0100 + + sna: Add some DBG to track rogue requests + + In particular allow the pointer cache to be disabled for valgrind. + + Signed-off-by: Chris Wilson + +commit 692555cc03c3a3632d2eaacdbbe800afdefd9f77 +Author: Chris Wilson +Date: Thu May 8 15:22:44 2014 +0100 + + sna: Rename DRI2 files, functions and variables + + Signed-off-by: Chris Wilson + +commit 09e26d38e9eca33e27fd0b30524e75814d5d3ad9 +Author: Chris Wilson +Date: Wed May 14 08:42:48 2014 +0100 + + sna: Avoid promoting SHM Pixmaps for DRI + + Signed-off-by: Chris Wilson + +commit 7303c6c75df135d2d01f126f240a270ad26201c6 +Author: Chris Wilson +Date: Mon May 12 09:56:51 2014 +0100 + + sna: Check for PRIME scanouts + + Query the cache level on imported dma-bufs to see if they need special + handling. + + Signed-off-by: Chris Wilson + +commit ad01e1c8700caeaf0288b72450646d7ebe7cce93 +Author: Chris Wilson +Date: Thu May 8 13:02:15 2014 +0100 + + sna: Fix another assignment inside an assert + + Another recent introduction, spotted by Rinat Ibragimov. + + Signed-off-by: Chris Wilson + +commit e78a00c5da922024ac64270fae0797d98d1d6e57 +Author: Chris Wilson +Date: Thu May 8 06:45:43 2014 +0100 + + sna: Add an xorg.conf option for removing unused outputs + + Clients are not yet ready for outputs that disappear at runtime, often + unexpectedly dieing with asynchronous BadOutput errors. A simple + workaround is to not remove any output just yet - but allow users to opt + in via xorg.conf, i.e. + + Section "Device" + Option "DeleteUnusedDP12Displays" "true" + EndSection + + The name chosen is to be consistent with the nvidia driver, which did + MST first and encountered all of these issues first, and has also been + adopted for -modesetting. If this is combined with persistent output + naming (i.e. based on DisplayPort branch topology), the number of + outputs presented to the user should be static. + + Instead of removing the outputs, we have to mark them detached instead + to avoid throwing errors from the kernel. + + Based on the patch for -modesetting by Dave Airlie. + Signed-off-by: Chris Wilson + +commit a93157587a82c699e7df76fb482c49569f0686b9 +Author: Chris Wilson +Date: Wed May 7 21:20:56 2014 +0100 + + sna: Tidy thread handling under valgrind + + If valgrind is running, keep it simple and avoid using unknown + instructions (causing valgrind to die with SIGILL). + + Signed-off-by: Chris Wilson + +commit efd9e9c3eeb83b9e5725fa642066925d608c059d +Author: Chris Wilson +Date: Wed May 7 21:19:57 2014 +0100 + + sna/dri: Use move-area-to-gpu to handle clipped regions more efficiently + + Signed-off-by: Chris Wilson + +commit 1385ca9eeb26b0b82b623da619a65036830ccceb +Author: Chris Wilson +Date: Wed May 7 21:19:32 2014 +0100 + + sna: Initialize value read through ioctl to please valgrind + + Signed-off-by: Chris Wilson + +commit 7d516589ba9d0325e57e08d41becff64f81e2d00 +Author: Chris Wilson +Date: Wed May 7 17:49:15 2014 +0100 + + sna/dri: Implement TripleBuffering using DRI2SwapLimit + + An addition to DRI2 that was overlooked at the time, was the support + added for having multiple outstanding swap requests in the core. The + importance of this is that we can then send the SwapComplete reply after + the pageflip is completed and not before as we currently do to fake + triple buffering - in clear violation of OML_sync_control. + + Signed-off-by: Chris Wilson + +commit 18416b5162e6d6e5415916c55c935b08c980d7f3 +Author: Chris Wilson +Date: Wed May 7 13:49:13 2014 +0100 + + sna: Don't assign in an assert + + That just nullifies the point of the assert in the first place. + + Spotted-by: Joakim Tjernlund + Signed-off-by: Chris Wilson + +commit 0250a4f4ba5b765fe4e9be585e03c92aa2376402 +Author: Chris Wilson +Date: Wed May 7 12:40:01 2014 +0100 + + sna: Fix bogus assertion about conn->encoder_id + + The connector's encoder_id is only set if the output is active. + + Signed-off-by: Chris Wilson + +commit c410f0cd982cad8de440727b0ad7d9268b89a704 +Author: Chris Wilson +Date: Wed May 7 11:04:10 2014 +0100 + + sna: Set desired mode after rediscover during VT switch + + When switching back to the VT, rerun the output discovery (if such an + event was pending) before we attempt to set the desired modes. + + Signed-off-by: Chris Wilson + +commit c38512e12e879ae8932528a9cac5ffbf4ea138c0 +Author: Chris Wilson +Date: Wed May 7 11:01:30 2014 +0100 + + sna: Run output discovery before modes query + + If we keep the separate discovery uevent, we need to run it first in the + cases where we get combined discovery+hotplug events. + + Signed-off-by: Chris Wilson + +commit 7aefd003bb65cc52a74dfcfd8af4b67a364343ff +Author: Chris Wilson +Date: Wed May 7 10:13:53 2014 +0100 + + sna: Fix unattached outputs for ZaphodHeads + + We need to preserve possible_crtcs for the later check that we can use + the output with the particular ZaphodHead (which owns a CRTC). + + Signed-off-by: Chris Wilson + +commit c5bad6daaaa60fa8970eaf4a1ce485cd4c72c2fd +Author: Chris Wilson +Date: Wed May 7 07:53:11 2014 +0100 + + intel-virtual-output: Disable remote CRTC using the remote Display! + + Reported-by: Kirill Müller + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78293 + Signed-off-by: Chris Wilson + +commit 632d3dfe215c38f2dd052625ea8ec34582dfafef +Author: Chris Wilson +Date: Tue May 6 12:24:37 2014 +0100 + + sna: Treat encoder id array as invariant + + Signed-off-by: Chris Wilson + +commit f62dfd8f518bb4117d395f81b684340dc4f1ede5 +Author: Chris Wilson +Date: Tue May 6 07:37:59 2014 +0100 + + sna: Allow connectors without an associated encoder + + In the future, we may see a setup where connectors are created without + being attached to a specific encoder, instead associated with multiple + generic encoders - such as DP MST sink devices. To handle this, we need + to recheck their active encoder at runtime after branch configuration + events (or possibly hotplug). + + Signed-off-by: Chris Wilson + +commit ea602f7e10c6319c4213776b49f2ae25739af316 +Author: Chris Wilson +Date: Tue May 6 06:58:35 2014 +0100 + + sna: Discard the TearFree damage when doing a full CPU migration + + Signed-off-by: Chris Wilson + +commit b8d71e029cec5c8d1c7e344331b86d2e27f6bc24 +Author: Chris Wilson +Date: Mon May 5 20:59:24 2014 +0100 + + sna: Tidy computation of clone/crtcs for fake outputs + + Signed-off-by: Chris Wilson + +commit 77507909a18b687698f6d4e436ef66d942308fc3 +Author: Chris Wilson +Date: Mon May 5 19:43:25 2014 +0100 + + intel-virtual-output: Grab the server whilst cleanging up the local output + + Signed-off-by: Chris Wilson + +commit 56126d00503fd9bc6fe30781ecddb2fb67de817b +Author: Chris Wilson +Date: Mon May 5 18:17:01 2014 +0100 + + sna: Refine hints to allow inplace writes whilst compositing aligned traps + + Signed-off-by: Chris Wilson + +commit 464ef44ab1d691a4bffecbe88be8182adf9fd4ff +Author: Chris Wilson +Date: Mon May 5 14:49:31 2014 +0100 + + intel-virtual-output: Copy existing CRTC information + + If we fail to disable the remote output during initialisation, copy the + current configuration in order to try and keep the bookkeeping in order. + + Signed-off-by: Chris Wilson + +commit 194f9332d35601178ae3595bc17a3f52f5644cb9 +Author: Chris Wilson +Date: Mon May 5 14:29:16 2014 +0100 + + intel-virtual-output: Try disabling Panning after disabling CRTC + + Signed-off-by: Chris Wilson + +commit 5279ebf56449a9b9edd28ff23e9c8a20af792795 +Author: Chris Wilson +Date: Mon May 5 13:06:11 2014 +0100 + + intel-virtual-output: Mark ShmPixmap destinations as writeable + + In order to prevent a subsequent BadAccess when we try to use it as a + ShmPixmap, we need to mark the segment as writeable. + + Signed-off-by: Chris Wilson + References: https://bugs.freedesktop.org/show_bug.cgi?id=78293 + +commit a93d2d4f910dc66fe7114a4f44bf8098e3f7ae7a +Author: Chris Wilson +Date: Mon May 5 13:03:14 2014 +0100 + + intel-virtual-output: Check for errors whilst creating ShmPixmaps + + Creating a ShmPixmap may cause an asynchronous BadAccess error, so wrap + the construction with XSync and check for an error before proceeding. + + Signed-off-by: Chris Wilson + References: https://bugs.freedesktop.org/show_bug.cgi?id=78293 + +commit 45892b3a63613af67e249e9ad006f2b2002570c0 +Author: Chris Wilson +Date: Mon May 5 12:41:06 2014 +0100 + + intel-virtual-output: Record shm/randr/xinerama queries in DBG log + + Signed-off-by: Chris Wilson + +commit 6c9f216d7ce7c329b1008cb09c9de55396e0e6b1 +Author: Chris Wilson +Date: Mon May 5 12:38:51 2014 +0100 + + intel-virtual-output: Check error state when disabling CRTC + + Only mark an output as disabled if we do successfully disable it. This + will require a little more work to make sure that such errors are + cleanly propagated back to the host... + + Signed-off-by: Chris Wilson + +commit ef178f7d6955e12383c64ad9ee706db0e931992e +Author: Chris Wilson +Date: Mon May 5 09:37:56 2014 +0100 + + sna: Fix loop iteration whilst deleting connectors + + If we remove a connector/output, we need to not advance the iterator or + else we skip over an output (as the array is reduces inside the loop). + + Signed-off-by: Chris Wilson + +commit 8fd13a52072c2f8f12f934deaba1ef9ddb16d5f9 +Author: Chris Wilson +Date: Mon May 5 09:32:59 2014 +0100 + + sna: Reorder connector initialisation to avoid leak + + If the output was ignored, we would leak the allocations. However, we + can check the output name after the first GETCONNECTOR/GETENCODER + request before any allocations. + + Signed-off-by: Chris Wilson + +commit 55f567f9d8dd1bbc21acf30f02d394e54ddc8157 +Author: Chris Wilson +Date: Sun May 4 12:13:25 2014 +0100 + + sna/dri: Report the last known MSC whilst the pipe is off + + From OML_sync_control: + "The graphics MSC value is incremented once for each screen refresh. + For a non-interlaced display, this means that the graphics MSC value + is incremented for each frame." + + When the pipe is disabled, return the last known MSC such that the + reported value is always monotonic and consistent with the pipe when it + is active again. That also is consistent with OML_sync_control which + says that the MSC is a vertical refresh counter, and by implication does + not increase whilst the pipe is off. + + Signed-off-by: Chris Wilson + +commit 080e9f99857081bca063c67afb7c98854d1f61f4 +Author: Chris Wilson +Date: Sun May 4 11:59:40 2014 +0100 + + sna: Prefer PrimaryOutput for timing signals + + If the drawable is even partially on the PrimaryOutput, use that pipe + for determining synchronisation counters and synchronised updates. + + OML_sync_control: + "For a multi-monitor system, the monitor used to + determine MSC is screen 0 of ." + + The PrimaryOutput is the nearest approximation we have to "screen 0". We + also deviate in handling what hapens when that screen is off, which is + not mentioned at all in OML_sync_control. + + Signed-off-by: Chris Wilson + +commit 828bd9e250b7d9dd1dc4185c0179237e9b21d8bf +Author: Chris Wilson +Date: Fri May 2 17:13:29 2014 +0100 + + sna: Reorder cursor initialisation + + It helps to initialise the cursors after we setup one of the values we + depend on. + + Signed-off-by: Chris Wilson + +commit 38f82655e0bc8f26250f56e9a25aedd30b46360c +Author: Chris Wilson +Date: Fri May 2 12:30:43 2014 +0100 + + sna: Remove incorrect cursor assertion + + Ideally, we want to assert that we have sufficient stashed cursors to + allocate for the unused CRTCS, so something like + assert(num_stash + num_active_cursors >= 0); + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 430152da82f496ac47f33ce1eca65d154af38752 +Author: Chris Wilson +Date: Fri May 2 16:57:27 2014 +0100 + + compat: Add missing wrapper for RegionSubtract + + Signed-off-by: Chris Wilson + +commit add84cd8a8dc6d285912d0ea3a3a3e7faa9e0942 +Author: Chris Wilson +Date: Fri May 2 13:21:02 2014 +0100 + + sna: Perform dynamic connector discovery + + One of the side-effects of MST is that we need to support dynamic + attachment and removal of displays as the branch hierachy changes. + + Signed-off-by: Chris Wilson + +commit 3123dec3dfc55fbca32d32eaaa8ac29396b28c49 +Author: Chris Wilson +Date: Fri May 2 10:40:47 2014 +0100 + + sna: Do not stash drmModeResPtr + + In the near future we will be dealing with dynamic discovery of + connectors, and so we cannot assume that the mode resources will be + static for our lifetime. The first step is to not keep that struct + around, but pull out the useful information and discard it. + + Signed-off-by: Chris Wilson + +commit 7b072074aa2b08c09a3d920d67f38ae73009ced6 +Author: Chris Wilson +Date: Fri May 2 08:27:07 2014 +0100 + + sna: Refactor hints for GPU promotion of composite fills + + The major change here is not do a full promotion if we are filling + through a clip region. The original intention was to catch doing the + initial clear of the background, but it was also triggering for drawing + rectangular outlines etc. + + Signed-off-by: Chris Wilson + +commit 81608b4da5b35993cd2071098235c14920b7236d +Author: Chris Wilson +Date: Thu May 1 13:15:11 2014 +0100 + + sna: Do not discard damage when using the CPU to perform BLT spans + + The BLT paths are only taken when we know we are overwriting the target + contents, and so we do not have to worry about reads along those paths. + However, in terms of migrating the damage for a pixmap, we have to be + careful in case we do not write to the full area of the composite + rectangle, in which case we have to treat it as a read to that area and + migrate the damage. + + Regression from + commit a13781d19defc97af6a279c11a85e33ef825020e [2.20.10] + Author: Chris Wilson + Date: Sun Aug 19 09:45:12 2012 +0100 + + sna: Enable BLT composite functions to target CPU buffers + + Signed-off-by: Chris Wilson + + Reported-by: Matti Hämäläinen + Signed-off-by: Chris Wilson + +commit 150458c402f2a93e87924dacd3d0e99def512b85 +Author: Chris Wilson +Date: Thu May 1 09:42:07 2014 +0100 + + sna: Refactor migration DBG code + + And add a new DBG option to disable partial-cpu migrations. + + Signed-off-by: Chris Wilson + +commit ca57ee723497b07396646e567fd87dfce8d779fa +Author: Chris Wilson +Date: Thu May 1 09:15:28 2014 +0100 + + sna: Add some DBG for tracing vblanks across modeset/resume + + Signed-off-by: Chris Wilson + +commit bcbb2f222c39ab8732bf1daa248c77ce22cc173e +Author: Chris Wilson +Date: Wed Apr 30 14:43:01 2014 +0100 + + sna/dri: Tidy call to vblank ioctl for MSC waiting + + Signed-off-by: Chris Wilson + +commit 4430703619dc6012407ab703f211dc1181ba6ec8 +Author: Chris Wilson +Date: Wed Apr 30 11:10:49 2014 +0100 + + sna: Be more lenient and allow tiled uploads to replace CPU buffers + + Signed-off-by: Chris Wilson + +commit 2fd1a05ac50ac4ba7cf09225f9133a8141aef302 +Author: Chris Wilson +Date: Tue Apr 29 13:51:33 2014 +0100 + + sna/video: Initialise pitch before query + + Signed-off-by: Chris Wilson + +commit 41a573c15ca1a1e775a2060be117374a5bc6f9b9 +Author: Chris Wilson +Date: Tue Apr 29 13:30:14 2014 +0100 + + sna: Discard TearFree damage on partial migration + + If we are overwriting part of the framebuffer, we know we do not need to + read that portion back from the scanout. + + Signed-off-by: Chris Wilson + +commit d75501572a4ea95fc126314718468345630723a1 +Author: Chris Wilson +Date: Tue Apr 29 13:29:45 2014 +0100 + + sna: Preserve cpu hint for compatible mmapping of the GPU bo + + Signed-off-by: Chris Wilson + +commit 94e39323772ef6561efcc0620f67cabd2462a0d0 +Author: Chris Wilson +Date: Tue Apr 29 09:02:50 2014 +0100 + + sna: Recycle physical cursors + + A side-effect of the workaround for incoherent physical cursors is that + we never reused a cursor after disabling. As such moving the cursor off + the pipe and back on would eventually consume all the preallocated + structs leading to a segfault. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78002 + Signed-off-by: Chris Wilson + +commit 0b23011c27736d0ae2b33d8ea147c16b909baa57 +Author: Chris Wilson +Date: Mon Apr 28 15:59:18 2014 +0100 + + sna: Tweaks to cursor DBG logging + + Signed-off-by: Chris Wilson + +commit d4bd452caa335a54076fa003ee616c2efe93bca3 +Author: Chris Wilson +Date: Mon Apr 28 14:01:43 2014 +0100 + + sna: Assert against underflows in BLT command lengths + + Signed-off-by: Chris Wilson + +commit 2a993c8aa9e8594c32d5e67329b0dbed0d92c761 +Author: Chris Wilson +Date: Mon Apr 28 12:53:00 2014 +0100 + + sna: Initialise pointer before use + + commit 534a0e6433a37c95f7181f7ce9046a4e7c82532d + Author: Chris Wilson + Date: Mon Apr 28 07:53:13 2014 +0100 + + sna: Factor in destination sizes for choosing intermediate tiling bo size + + assumed that the target bo was being initialisation for the tiling + composite; it was not. + + Signed-off-by: Chris Wilson + +commit f0042850494ac16149ba310c910ca08f86c191fa +Author: Chris Wilson +Date: Mon Apr 28 08:37:11 2014 +0100 + + sna: Rearrange final aperture check + + If we cross the high water mark, first flush the batch, then check the + remaining pages to see if they fit into the aperture. + + Reported-by: Bruno Prémont + Signed-off-by: Chris Wilson + +commit 7a685d1d7b63a1589ba0fd09168d4f95d18fcae5 +Author: Chris Wilson +Date: Mon Apr 28 08:31:59 2014 +0100 + + sna: Add a minor DBG for tiled copies + + Signed-off-by: Chris Wilson + +commit 3e330f3980b7bacad30b25ff144e4162acc854bb +Author: Chris Wilson +Date: Mon Apr 28 08:15:35 2014 +0100 + + sna: Refine fence packing estimates + + Signed-off-by: Chris Wilson + +commit 534a0e6433a37c95f7181f7ce9046a4e7c82532d +Author: Chris Wilson +Date: Mon Apr 28 07:53:13 2014 +0100 + + sna: Factor in destination sizes for choosing intermediate tiling bo size + + When tiling, factor in the destination usage of the aperture in case + that reduces the available aperture for the intermediate bo. + + Signed-off-by: Chris Wilson + +commit 11cc397cb1cded40f7ab43c1add3fd00b97c6bdc +Author: Chris Wilson +Date: Sun Apr 27 07:55:09 2014 +0100 + + sna: Preallocate cursors + + We need to avoid all allocations within the signal handlers, so + preallocate the cursor structs. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77975 + Signed-off-by: Chris Wilson + +commit 9417f13cc4074ea6e5dad88e054337e93b461a4c +Author: Chris Wilson +Date: Sun Apr 27 07:55:09 2014 +0100 + + sna: Preallocate pwrite scratch buffer for old fashioned cursor updates + + We need to avoid all allocations within the signal handlers, so + preallocate the transfer buffer. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77975 + Signed-off-by: Chris Wilson + +commit 795cebf053e8457b998522ab7eea80b0819cb46b +Author: Chris Wilson +Date: Sun Apr 27 07:52:14 2014 +0100 + + sna: Replace cursor gen test with feature flag + + Signed-off-by: Chris Wilson + +commit 1b76a1f6fb046353b1e2f553dfcb03978807272d +Author: Chris Wilson +Date: Sun Apr 27 08:32:17 2014 +0100 + + sna: Initialise cursors after checking for KMS + + Signed-off-by: Chris Wilson + +commit b3c5a524965958b5b11a1195e773d10ac9fc6611 +Author: Chris Wilson +Date: Wed Apr 23 14:23:55 2014 +0100 + + sna: Tweak use inplace CPU maps for writing + + Allow us to write into a GPU bo without any pending CPU damage. + + Signed-off-by: Chris Wilson + +commit c872be6cbef3b07dc79fc8f83d719543c0adcdee +Author: Chris Wilson +Date: Wed Apr 23 14:23:55 2014 +0100 + + sna: INPLACE has early exits in move-to-cpu + + We can update the priv->cpu flag more accurately by accounting for the + early exits for the INPLACE accessors. + + Signed-off-by: Chris Wilson + +commit 05cf93287419992208493f5098fc7b089e95b20c +Author: Chris Wilson +Date: Wed Apr 23 14:21:39 2014 +0100 + + sna: Be more selective of reusing bo for inplace uploads on !LLC + + On older architectures, we can only do the inplace upload into a GPU bo + into a new unused bo (that is still in the GPU domain). + + Signed-off-by: Chris Wilson + +commit cf7efedb32b63901f7e42a90f756899b9ba60e65 +Author: Chris Wilson +Date: Wed Apr 23 14:20:47 2014 +0100 + + sna: Tweak untiled limits + + Allow more small pixmaps to use untiled for linear mmappings. + + Signed-off-by: Chris Wilson + +commit 5fbbfd4dd35c5e5381897b7e5d4c16c1f182ef2b +Author: Chris Wilson +Date: Wed Apr 23 11:34:06 2014 +0100 + + sna/video: Show sprites across all outputs + + If an overlay video (using the sprite interface) is visible on multiple + outputs, we have to create and show a sprite for each. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77802 + Signed-off-by: Chris Wilson + +commit 3508f809c40bc59d67deb7182807664bc0648639 +Author: Chris Wilson +Date: Wed Apr 23 11:46:12 2014 +0100 + + sna: Fix assertions for mmapping stolen buffers + + Signed-off-by: Chris Wilson + +commit aec3cbb1aba8bae5537534754ea57d21896d591b +Author: Chris Wilson +Date: Wed Apr 23 09:17:22 2014 +0100 + + sna: Reuse any output not explicitly disconnected + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77768 + Signed-off-by: Chris Wilson + +commit 4ed733d16a6ce35b1426bddd993a360f0a7387a8 +Author: Chris Wilson +Date: Wed Apr 23 09:17:01 2014 +0100 + + sna: Improve DBG messages for rejecting outputs during initial config + + Signed-off-by: Chris Wilson + +commit bb5b21e34f6cbe44a249e566471754b45c500e60 +Author: Chris Wilson +Date: Tue Apr 22 21:22:37 2014 +0100 + + sna: Apply defense against a rogue call to move a SW cursor + + So the sna_set_cursor_postion() assertion was reported to have caught us + trying to adjust the position of an absent cursor. That should be + impossible as we should only arrive there if we claim we can support a + HW cursor and so have a registered cursor. However, changing the + assertion into a guard is trivial, and preserves peace of mind. + + Signed-off-by: Chris Wilson + +commit b12bc035fb8ee40bb382e66604e869b729270189 +Author: Chris Wilson +Date: Tue Apr 22 12:30:29 2014 +0100 + + sna: Add a DBG aide to disable hardware execution + + Submit a dummy batch so that we still build, submit batches and perform + relocations, but do not actually invoke the GPU. This can be useful when + looking at mysterious hardware hangs. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77263 + Signed-off-by: Chris Wilson + +commit f6bc0e390bcba97f7aacab4d87251867ca309c17 +Author: Chris Wilson +Date: Tue Apr 22 09:41:21 2014 +0100 + + sna: Use a global pixman glyph cache + + In Zaphod mode, we use a common pool of glyph images but insert them + individually into a cache for each head. However, we only remove the + image from the first cache, leaving a stale slot in the second head. + Upon subsequent reuse of the glyph id, the second head renders garbage. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54707 + Signed-off-by: Chris Wilson + +commit b259cbffcfb41a20c8b0cf1c32f6ff3e9872a472 +Author: Chris Wilson +Date: Sun Apr 20 16:39:37 2014 +0100 + + sna: Avoid copying from tiled source for an overwritten fill + + Signed-off-by: Chris Wilson + +commit 935ec0abcb3b92b1aad00885be59644bf775f5dd +Author: Chris Wilson +Date: Mon Apr 21 08:20:39 2014 +0100 + + uxa: Remove misnomer from ATI logs + + Signed-off-by: Chris Wilson + +commit 08e71e1820d6fcb6829b4ebd360beadc1f250295 +Author: Chris Wilson +Date: Sat Apr 19 16:27:49 2014 +0100 + + sna: Initialise thread->arg + + If we launch less than the maximum number of threads, we may read the + thread->arg value never having set it after a malloc. + + ==8207== Conditional jump or move depends on uninitialised value(s) + ==8207== at 0xA986B7F: sna_threads_wait (sna_threads.c:216) + ==8207== by 0xA986EFE: sna_image_composite (sna_threads.c:350) + ==8207== by 0xA93DD0D: sna_composite_fb (sna_composite.c:598) + ==8207== by 0xA93E66C: sna_composite (sna_composite.c:742) + ==8207== by 0x23A773: damageComposite (damage.c:503) + ==8207== by 0x2309A9: ProcRenderComposite (render.c:708) + ==8207== by 0x15D86D: Dispatch (dispatch.c:433) + ==8207== by 0x161689: dix_main (main.c:294) + ==8207== by 0x6FB1B44: (below main) (libc-start.c:287) + + Signed-off-by: Chris Wilson + +commit 58a757b64927d8e27c4ac38cc15f8291037ec905 +Author: Chris Wilson +Date: Fri Apr 18 09:28:02 2014 +0100 + + sna: Do not reuse physical cursors for the kernel is broken, harder + + commit 154f7e9668bffdf565b6914a3a3e5bdfe17aa1b9 + Author: Chris Wilson + Date: Fri Apr 18 09:28:02 2014 +0100 + + sna: Do not reuse physical cursors for the kernel is broken + + was insufficient as it ended up reusing a stale cursor that was still + attached, and so after updating the cursor the second pipe found itself + with a valid cursor. Hey presto, we had a shared physical cursor, once + again demonstrating the buggy kernel. + + This time, disable all cursor reuse except for the once currently + attached to the pipe - this should prevent all sharing. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77351 + Signed-off-by: Chris Wilson + +commit fb0ed43cbc6f34bde670ab846e7ba9e7dbf9b660 +Author: Chris Wilson +Date: Fri Apr 18 20:55:49 2014 +0100 + + sna: Refine detection of when shadow is active during BlockHandler + + Signed-off-by: Chris Wilson + +commit 2d9ae02c647f93be58d3f77168752774868008f5 +Author: Chris Wilson +Date: Fri Apr 18 11:43:45 2014 +0100 + + sna/video: Provide a fallback path for pwrite failure + + Stranger things have happened. + + Signed-off-by: Chris Wilson + +commit fdc28205d590d560a6f3886189ef974d1d00f2cd +Author: Chris Wilson +Date: Fri Apr 18 11:34:07 2014 +0100 + + sna: Always flush the shadow scanout + + When the shadow scanout is active, make sure we call the BlockHandler + every time, not just when we about to sleep. This is in case we are + swamped by clients trying to render and forgo the important step of + ensuring that their output reaches the screen. + + Reported-by: Ildar Nurislamov + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit 924237efbddb167efc7f9f3bde42b32ffc538ee3 +Author: Chris Wilson +Date: Fri Apr 18 11:33:42 2014 +0100 + + sna: Fix some DBG formats + + Signed-off-by: Chris Wilson + +commit fa56f1062b926b15e554f46eb268a69b43dd8b9f +Author: Chris Wilson +Date: Fri Apr 18 09:52:26 2014 +0100 + + sna/video: Only try to set the color key once + + So that we only report the error to the user a single time, and not + every frame. + + Signed-off-by: Chris Wilson + +commit 154f7e9668bffdf565b6914a3a3e5bdfe17aa1b9 +Author: Chris Wilson +Date: Fri Apr 18 09:28:02 2014 +0100 + + sna: Do not reuse physical cursors for the kernel is broken + + Big bug in the kernel that prevents the sharing of cursors across pipes + when they are backed by a phys_obj. To prevent hitting that bug, don't + do that! + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77351 + Signed-off-by: Chris Wilson + +commit 83f49767f8ed9dd49c40ebc65ed22c288a386edd +Author: Chris Wilson +Date: Tue Apr 15 16:27:44 2014 +0100 + + sna: Pre-emptively bind framebuffers into the GTT + + In order to avoid rendering to the bo and then stalling before we can + pin it the display plane, bind the framebuffer into the GTT (by using a + GTT mmap) during the initial allocation. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit fd0579016be9e0385c0cdd07a9f9e17f93b93a4f +Author: Chris Wilson +Date: Tue Apr 15 16:27:44 2014 +0100 + + sna: Pre-emptively move framebuffers into the DISPLAY cache domain + + In order to avoid rendering to the bo and then stalling before we can + pin it the display plane, allocate bo for fb from uncached and change + the cache level during the initial allocation. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit b0472af1f3c6832838b0cfea38e261c908afd04e +Author: Chris Wilson +Date: Tue Apr 15 16:31:08 2014 +0100 + + sna: Mark partial composite operations upfront + + Rather than guess in the backend when we are going to be called for + multiple boxes, rely on the frontend declaring it correctly. + + Signed-off-by: Chris Wilson + +commit 49e72bd4e59085aa940e5af63381c5394ee670ad +Author: Chris Wilson +Date: Tue Apr 15 11:24:10 2014 +0100 + + sna: Discard TearFree readback when overdrawing + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77436 + Signed-off-by: Chris Wilson + +commit 13054a00dadedae6495eb5cdf586b7916b82053e +Author: Chris Wilson +Date: Tue Apr 15 10:28:32 2014 +0100 + + sna: Fix up cut'n'paste typo in assertion + + sna_display.c:3176:43: error: 'struct ' has no member named 'rotation' + assert(cursor->rotation != sna->cursor.rotation); + + Reported-by: Ildar Nurislamov + Signed-off-by: Chris Wilson + +commit 1ed8647aef012d30c602f86fc6f97a0a92d7710f +Author: Chris Wilson +Date: Tue Apr 15 06:55:26 2014 +0100 + + sna: Add a cursor DBG for a failed pwrite update + + Signed-off-by: Chris Wilson + +commit cb35b397395cff8ff7f5155759f58c1840bfeeb5 +Author: Chris Wilson +Date: Mon Apr 14 17:12:37 2014 +0100 + + sna: Rearrange cursor reuse to avoid sharing rotations + + Try not to steal a rotated cursor that is currently in use, or else we + may see a brief flash of corruption. + + Signed-off-by: Chris Wilson + +commit fd700c37ee2a68262b1ccfff332dd41ba8599e2c +Author: Chris Wilson +Date: Mon Apr 14 16:48:05 2014 +0100 + + sna: Add some bounds checking asserts to damage + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1300640 + Signed-off-by: Chris Wilson + +commit 9ae82134ad14085e80d93592e155978a5056f44a +Author: Chris Wilson +Date: Fri Apr 11 18:36:16 2014 +0100 + + sna: Restrict WHOLE hint to PutImage on a complete Pixmap + + Signed-off-by: Chris Wilson + +commit 6883f5a64498880425d47871323642409282d9ab +Author: Chris Wilson +Date: Fri Apr 11 08:02:49 2014 +0100 + + sna: Perform 2-color to ARGB cursor conversion inplace + + Signed-off-by: Chris Wilson + +commit 2eddc60a5fe1fabefcad93783d58354570132af3 +Author: Chris Wilson +Date: Fri Apr 11 07:52:30 2014 +0100 + + sna: Don't redraw cursor if the fg/bg colors do not change + + Signed-off-by: Chris Wilson + +commit a79eb2e29a158910785580409c51a585f25876a7 +Author: Chris Wilson +Date: Thu Apr 10 20:41:57 2014 +0100 + + sna/gen2: Fix CA/a8 blend factors + + This is a revert of + + commit 142f8461944b294dbc3fb0a7bf607bccf0bccc1f [2.99.911] + Author: Chris Wilson + Date: Mon Mar 10 15:20:16 2014 +0000 + + sna/gen2: Tidy blend factor selection for the source + + as that broke glyph rendering in firefox for instance. + + Reported-by: Carl Eitsger <4607vrfcr84spd21f08@weg-werf-email.de> + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77201 + Signed-off-by: Chris Wilson + +commit 25fa4f5bb4c9ed12755edfeec38b9bdc134736f1 +Author: Chris Wilson +Date: Thu Apr 10 23:14:32 2014 +0100 + + sna: Don't set cursor bits to an invalid pointer + + The xf86Cursor core simply frees it, so it has to be NULL. + + Signed-off-by: Chris Wilson + +commit 7b2753f9cc6a1a7ca353f57d78bdf3d52f32864b +Author: Chris Wilson +Date: Thu Apr 10 23:11:18 2014 +0100 + + sna: Only mark the transform_in_use when required for shadow fb + + Signed-off-by: Chris Wilson + +commit 4950bc4fea80d44dde798f3f8b5a07eee1555a63 +Author: Chris Wilson +Date: Thu Apr 10 22:26:42 2014 +0100 + + sna: Only reload an active HW cursor + + Do not attempt to restore the cursor handle if a SW cursor is currently + active. In particular, this prevents a crash after modesetting if we + never had a real cursor (for example output offloading). + + Reported-by: Tomas Pruzina + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77283 + Signed-off-by: Chris Wilson + +commit 8e6e7dbc9257a223ab284198e92f263a1a8b5553 +Author: Chris Wilson +Date: Thu Apr 10 21:44:35 2014 +0100 + + sna: Don't create slave pixmaps for the virtual CRTC + + They only exist as placeholders for remote outputs in the framebuffer + and do not need to take part in actually output offloading, so we can + forgo creating slave pixmaps and remove the stub function entirely. + + Signed-off-by: Chris Wilson + +commit f94684db1a694820ff508d8aec77bf19cea86fbd +Author: Chris Wilson +Date: Thu Apr 10 16:08:48 2014 +0100 + + sna: Validate the cursor everytime for hw support + + Signed-off-by: Chris Wilson + +commit d364a881effb2fd87f11648b10d126eb18fcb6be +Author: Chris Wilson +Date: Thu Apr 10 09:12:02 2014 +0100 + + configure: Report which version (lib or module) of glamor is used + + Signed-off-by: Chris Wilson + +commit b771b41f0a945fc580d532524cc744b01dd36d5f +Author: Eric Anholt +Date: Wed Apr 9 15:24:23 2014 -0700 + + uxa: Fix load_cursor_argb for the new Xorg ABI. + + Returning an undefined value meant we might get sw cursors. + +commit d812afc1d4476ba987883fad2ef8b7c002638077 +Author: Eric Anholt +Date: Wed Apr 9 15:24:22 2014 -0700 + + Use fbpict.h instead of defining its prototypes ourselves. + + fbpict.h has been an installed header since 2008, shortly after uxa + landed. This fixes compiler warnings when other headers happen to + include fbpict.h. + +commit a6919aa980883cf2828dc0cf813f315e3035d0cf +Author: Eric Anholt +Date: Wed Apr 9 15:24:21 2014 -0700 + + Update for glamor in the 1.16 server. + + We should link against the server's copy, insted of using the external + library. + +commit be7c166a017cee3ef8a1b7b290b7fb14b4009314 +Author: Chris Wilson +Date: Thu Apr 10 08:22:02 2014 +0100 + + sna: Remove defunct Cursor interface on fake CRTC + + As we no longer user the xf86Cursor helper, we can forgo filling in stub + routines for the fake CRTC. + + Signed-off-by: Chris Wilson + +commit 1d2872dd0830c8858621402328aa1a9322b66ea8 +Author: Chris Wilson +Date: Thu Apr 10 07:35:50 2014 +0100 + + sna: Prepare for an upcoming Cursor API change + + 1.16 now expects load-cursor-argb to return a boolean reporting + success/failure. + + Signed-off-by: Chris Wilson + +commit f9a279b2dc8417b6504478ac96514125d6136523 +Author: Chris Wilson +Date: Wed Apr 9 22:15:19 2014 +0100 + + intel-virtual-output: Fix damage bounds + + Sigh. A serious mixup of integer promotion rules and wraparound caused + the damage computation for small regions to be completely bogus. + + Signed-off-by: Chris Wilson + +commit e0c93a3e53a624beb5d3a15631237ac33b8c92cd +Author: Chris Wilson +Date: Wed Apr 9 18:51:23 2014 +0100 + + intel: If a non-root user starts X, don't release master + + SET_MASTER and DROP_MASTER are only available to the root user. If we + are started as an ordinary user, and we are master by virtue of being + the first user of the device, never release our fd or master. + + Signed-off-by: Chris Wilson + +commit dba43d370b984e262f6fe5920b38b433f4bd392b +Author: Chris Wilson +Date: Wed Apr 9 16:11:26 2014 +0100 + + sna: Use pwrite to update physical cursors + + Older hardware uses physical addresses for its cursor, which are + implemented by the kernel in an incoherent fashion. Maybe with stolen + support this would be different... + + Fixes regression on [845g, 945g] from + commit 25ca8f136cef9e1bdf06967bf8e78c87b54ffce2 + Author: Chris Wilson + Date: Thu Mar 27 14:15:30 2014 +0000 + + sna: Support variable sized cursors + + Reported-by: Knut Petersen + Signed-off-by: Chris Wilson + +commit f14d6cbff3b9766f5fa834282a4eca6636b6fd7d +Author: Chris Wilson +Date: Wed Apr 9 13:14:37 2014 +0100 + + sna: Handle clipped PutImage uploads more carefully + + If the upload is clipped, we do not want to apply the WHOLE migration hints. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77178 + Signed-off-by: Chris Wilson + +commit 510e5cf3fa4e1db8297be62461b602b13d18d8fc +Author: Chris Wilson +Date: Wed Apr 9 12:26:53 2014 +0100 + + sna: Tweak application of WHOLE hint for uploads + + This help with the continuing saga of + commit 1de1104064b5898cbed37e836901694a381c1266 [2.99.911] + Author: Chris Wilson + Date: Fri Feb 21 22:43:04 2014 +0000 + + sna: Use a hint to do whole image uploads inplace + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77178 + Signed-off-by: Chris Wilson + +commit f05552cd7a43ea46ac1a37b68b05be2a82abaeb1 +Author: Chris Wilson +Date: Wed Apr 9 11:54:49 2014 +0100 + + sna: Add some DBG for whole CPU pixmap migration + + Signed-off-by: Chris Wilson + +commit cf4eb827861bf70d4d45a2ffe062d4c05a1564a6 +Author: Chris Wilson +Date: Wed Apr 9 10:22:49 2014 +0100 + + sna: Restore empty region checking + + commit 8ef81d676c52e42a6d9048fd92b2843470b62945 + Author: Chris Wilson + Date: Mon Apr 7 07:59:42 2014 +0100 + + sna: Simplify checking for singular damage + + overlooked that we were also checking for empty regions as well as + singular regions. + + Signed-off-by: Chris Wilson + +commit 9f40d7e91281b74df43f49885472ee352ea4b389 +Author: Chris Wilson +Date: Tue Apr 8 18:28:46 2014 +0100 + + sna: Fix build for older Xorg without OsBlockSIGIO support + + OsBlockSIGIO/OsReleaseSIGIO was only introduced in xorg-server-1.13.0, + so we need a compat layer. + + Signed-off-by: Chris Wilson + +commit 5db8717b8d9f089412b9a7529725c9c41e3e44fb +Author: Chris Wilson +Date: Tue Apr 8 18:00:47 2014 +0100 + + sna: Refactor 3 similar CPU migration promotion checks into one + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77178 + Signed-off-by: Chris Wilson + +commit 617e96f3af861dd797f98d5a74978f9ba595a981 +Author: Chris Wilson +Date: Tue Apr 8 08:47:05 2014 +0100 + + sna: Add more assertions before dereferencing sna_crtc + + Signed-off-by: Chris Wilson + +commit e6b03269d01e61527641639c6fb7b796205e6ed8 +Author: Chris Wilson +Date: Tue Apr 8 08:44:56 2014 +0100 + + sna: Continue to reprobe for ZaphodHeads with a mixed up configuration + + Fixes regresion from + commit 35b03b3fe6213eb3e08f05efe3428bd6bc5421d2 + Author: Chris Wilson + Date: Fri Mar 28 09:14:59 2014 +0000 + + sna: Virtual CRTCs are last, so break loops early + + as the conflicting Zaphod detection requires on searching all potential + CRTCs without finding the match. By breaking early on the virtual CRTC, + we concluded that the setup was actually valid, but disabled. + + Reported-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77156 + Signed-off-by: Chris Wilson + +commit bf1875139817c5b00d63a743e262c8f3552058ab +Author: Chris Wilson +Date: Mon Apr 7 08:28:55 2014 +0100 + + intel-virtual-output: Fixup DBG messages + + Use the right variables and it may even compile. + + Signed-off-by: Chris Wilson + +commit 8ef81d676c52e42a6d9048fd92b2843470b62945 +Author: Chris Wilson +Date: Mon Apr 7 07:59:42 2014 +0100 + + sna: Simplify checking for singular damage + + Signed-off-by: Chris Wilson + +commit f5014b3fddf6c79f5ca01a91eec5ca92184c8829 +Author: Chris Wilson +Date: Mon Apr 7 07:59:01 2014 +0100 + + sna: Avoid double application of pixel widening for degenerate lines + + References: https://bugs.freedesktop.org/show_bug.cgi?id=77074 + Signed-off-by: Chris Wilson + +commit 3310ee89c1f1a663de5f5b12b8125809a213996f +Author: Chris Wilson +Date: Sat Apr 5 12:18:31 2014 +0100 + + sna: Avoid discarding damage when applying WHOLE hint to pixmap migration + + Once again, we must be careful when promoting from a region to whole + pixmap migration that we do not discard required damage. + + Fixes regression from + commit 27ac9f574f65cbd535751c925e9b2e2d7c8a6b3a [2.99.911] + Author: Chris Wilson + Date: Thu Feb 27 08:33:52 2014 +0000 + + sna: Avoid promoting region-to-whole migration and discarding damage + + Reported-by: gedgon@gmail.com + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77063 + Signed-off-by: Chris Wilson + +commit 7e9ff48ddbe61ad2edbaefde7b94c84637a85291 +Author: Chris Wilson +Date: Sat Apr 5 10:44:48 2014 +0100 + + sna/gen8: Shrink 3DSTATE_SAMPLE_PATTERN packet + + This is now smaller than originally specified. + + Signed-off-by: Chris Wilson + +commit 878ed2d6250701e9ccceacb102b5542986976437 +Author: Chris Wilson +Date: Sat Apr 5 10:43:25 2014 +0100 + + sna/gen8: w/a for NULL depth buffer + + Instead of using a NULL type depth buffer, it is strongly suggested to + use a 1x1 16-bit depth buffer instead (with address 0). + + Signed-off-by: Chris Wilson + +commit 02862faeae21bd445d61006c9aeb966fbe6a7670 +Author: Chris Wilson +Date: Fri Apr 4 16:03:08 2014 +0100 + + sna: Remove unitialized use of 'cursor' + + The earlier query of cursor (simply to find out the hw size) was + replaced by an invariant determined when the cursor was first set. + However, not all uses of cursor->size were fixed. + + Fixes regression from + commit f98b2e164637292c2425f6e6d2c22bd9a2800f8e + Author: Chris Wilson + Date: Wed Apr 2 08:36:14 2014 +0100 + + sna: Prevent signal re-entrancy into cursor update routines + + Reported-by: Christoph Haag + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77053 + Signed-off-by: Chris Wilson + +commit 938eea6dee0be153fcf007549a50213f6c957305 +Author: Chris Wilson +Date: Fri Apr 4 15:56:38 2014 +0100 + + sna/gen2+: Beware the unattached ShmPixmap + + When dereferences priv, make sure it exists first. ShmPixmaps for + example, may not have one, nor do very small buffers. + + Signed-off-by: Chris Wilson + +commit 564e4a9878503c880e0cbd09d88b4c246a0267b6 +Author: Chris Wilson +Date: Fri Apr 4 14:04:38 2014 +0100 + + sna/gen7: Move constants MOCS into chipset specific info blocks + + Signed-off-by: Chris Wilson + +commit 6e86e84da1c8049a150eb6b5780526fea57e0f9d +Author: Chris Wilson +Date: Fri Apr 4 12:41:25 2014 +0100 + + sna: Precompute OVER/ADD with solids to convert it into a BLT operation + + Signed-off-by: Chris Wilson + +commit 31a4c7bc13c5f4560482b450b9ee4788a58930cd +Author: Chris Wilson +Date: Fri Apr 4 10:46:48 2014 +0100 + + sna/gen2+: Replace composite sources with solids where possible + + If the composite reads entirely from within a large pixmap which is a + clear color, just replace the source with a solid. + + Signed-off-by: Chris Wilson + +commit f0565852b668832d4988e875bc12e23abb6e1829 +Author: Chris Wilson +Date: Thu Apr 3 16:27:47 2014 +0100 + + sna: Short-circuit repeated clearing to the same color + + Spotted in amongst a KDE debug log was a series of clear; copy; repeat + using Composite(). + + Signed-off-by: Chris Wilson + +commit baef2201f752da5d0c6322547d925fcbd86c6de4 +Author: Chris Wilson +Date: Wed Apr 2 11:37:17 2014 +0100 + + sna: Silence compiler warning + + Simplify the dependency logic so that even the compiler can understand + what is going on. + + Signed-off-by: Chris Wilson + +commit f98b2e164637292c2425f6e6d2c22bd9a2800f8e +Author: Chris Wilson +Date: Wed Apr 2 08:36:14 2014 +0100 + + sna: Prevent signal re-entrancy into cursor update routines + + As we may need to allocate from within the cursor update, we are prone + to re-entrancy issues within malloc()/free(). To avoid these we need to + block SigIO (for pointer updates) whilst in the critical section. + + Signed-off-by: Chris Wilson + +commit a926d9f68231ac0f2a1f54c7a722979a8ed6e9e1 +Author: Chris Wilson +Date: Mon Mar 31 14:07:41 2014 +0100 + + sna: Update tiling flags after reusing inactive VMA + + Signed-off-by: Chris Wilson + +commit 644c274b2cd398c8236d36423677317cbc82308a +Author: Chris Wilson +Date: Mon Mar 31 14:03:49 2014 +0100 + + sna: Fix predicate inversion for assertion + + The assertion was checking that the invalid condition was true, rather + than that it never happened. Oops. + + Signed-off-by: Chris Wilson + +commit 4b97bf7e6e9e315cc77d940e3be97832a326e702 +Author: Chris Wilson +Date: Mon Mar 31 13:32:45 2014 +0100 + + sna: Use a cheaper check for a replacement operation + + Signed-off-by: Chris Wilson + +commit 76380bcc3c23d75575d37c0436369a8014bd5a3e +Author: Chris Wilson +Date: Mon Mar 31 12:46:58 2014 +0100 + + sna: Allow reassignment of inactive VMA if not mapped into the GTT + + Signed-off-by: Chris Wilson + +commit c4c8a1b180a9d4c1126ee4fe3120128aa560306c +Author: Chris Wilson +Date: Mon Mar 31 11:23:45 2014 +0100 + + sna: Discard damage tracking for operations to the whole pixmap + + Signed-off-by: Chris Wilson + +commit 8f796d4586507a0a6e9ca3608f43448983a3b965 +Author: Chris Wilson +Date: Mon Mar 31 11:14:46 2014 +0100 + + sna: Promote to the GPU operations that cover the whole pixmap + + If the pixmap is already partially on the GPU, and the next operation + touches the entire pixmap, promote that operation back to the whole GPU. + + Signed-off-by: Chris Wilson + +commit 27c086a89d838fe0060e5ddd0fb2f37434078e4d +Author: Chris Wilson +Date: Mon Mar 31 10:01:38 2014 +0100 + + sna: Regularly check that damage does exceed the pixmap + + Signed-off-by: Chris Wilson + +commit a8a5a5a58786445d393c3d6388904c0975c364a6 +Author: Chris Wilson +Date: Mon Mar 31 09:36:05 2014 +0100 + + sna: Search cursor cache first + + We can reuse the current cursor size rather than determine it every + time. + + Signed-off-by: Chris Wilson + +commit e892b789c4c6359e4fb2e11f552b3e43a466c49e +Author: Chris Wilson +Date: Fri Mar 28 11:34:03 2014 +0000 + + sna: Suppress a compiler warning + + sna_display.c: In function '__sna_get_cursor': + sna_display.c:3153:6: warning: assignment from incompatible pointer type [enabled by default] + src = sna->cursor.ref->bits->argb; + ^ + sna_display.c:3209:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] + if (src != sna->cursor.ref->bits->argb) + + Signed-off-by: Chris Wilson + +commit 5c0623b5f36cd1a1a2e3280ab2bea35a7899281b +Author: Chris Wilson +Date: Fri Mar 28 09:53:49 2014 +0000 + + sna: Only transform the temporary cursor coordinates + + As we need to recompute them for each CRTC, we need to reset the + computation each time or else we screw up the coordinates and hide + the cursors at random. + + Breakage from commit 25ca8f136cef9e1bdf06967bf8e78c87b54ffce2 + Author: Chris Wilson + Date: Thu Mar 27 14:15:30 2014 +0000 + + sna: Support variable sized cursors + + Reported-by: Jan Alexander Steffens + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76724 + Signed-off-by: Chris Wilson + +commit 80792a3f490578735065d9f67ca6ebac00b5bb75 +Author: Chris Wilson +Date: Fri Mar 28 09:43:34 2014 +0000 + + sna: Our cursors are always square. + + Signed-off-by: Chris Wilson + +commit 35b03b3fe6213eb3e08f05efe3428bd6bc5421d2 +Author: Chris Wilson +Date: Fri Mar 28 09:14:59 2014 +0000 + + sna: Virtual CRTCs are last, so break loops early + + We know that all the virtual CRTCs are at the end of the CRTC array, so + when we see the first one, we can stop the processing of real CRTCs. + + Signed-off-by: Chris Wilson + +commit 929ac66558be96a039eadd8604d444598259a0aa +Author: Chris Wilson +Date: Fri Mar 28 08:48:06 2014 +0000 + + sna: Cursors are invariant + + Once created, a Cursor has a fixed size and content, so avoid upload + unnecessarily. + + Signed-off-by: Chris Wilson + +commit 26cc3cec982d316b8fe1700eae885ae2767c0110 +Author: Chris Wilson +Date: Fri Mar 28 08:40:47 2014 +0000 + + sna: drmGetCap is too recent for our supported versions of libdrm + + Signed-off-by: Chris Wilson + +commit 78805163c5f8a40a649c973ab2a08b682879f16d +Author: Chris Wilson +Date: Fri Mar 28 08:45:39 2014 +0000 + + sna: RefCursor is too recent + + Replace RefCursor with the simple refcnt manipulation for compilation + against older stacks. + + Signed-off-by: Chris Wilson + +commit e07f8e2e625fb34f9ad795ca8fffc9a9e88e25b2 +Author: Chris Wilson +Date: Thu Mar 27 23:06:15 2014 +0000 + + sna: Fix 2-color to ARGB cursor conversion + + It helps to remember to advance through the source/mask images after + each row. + + Signed-off-by: Chris Wilson + +commit e501aa667699787daf7dc0dfd22c397a785564ce +Author: Chris Wilson +Date: Thu Mar 27 21:57:39 2014 +0000 + + sna: Cursors only need to be cleared when they are shrunk + + If we completely overwrite the old contents, we do not need to clear it + first. + + Signed-off-by: Chris Wilson + +commit 5c4d6d1ad748fe5301fa88d9c15c19a07c55149f +Author: Chris Wilson +Date: Thu Mar 27 21:16:31 2014 +0000 + + sna: Reorder the cursor cache search + + Search for an exact match first, before looking for a cursor we can + reuse. This should help reuse with multiple rotated screens not stealing + the others' cursor on every pass. + + Signed-off-by: Chris Wilson + +commit e8be2a438d7a413ba6c64005971ce814b0076fc7 +Author: Chris Wilson +Date: Thu Mar 27 21:09:45 2014 +0000 + + sna: Clear the surrounding areas of small cursors + + If the cursor does not completely fill the size of the hardware cursor, + we will retain whatever contents already filled that area. + + Signed-off-by: Chris Wilson + +commit 25ca8f136cef9e1bdf06967bf8e78c87b54ffce2 +Author: Chris Wilson +Date: Thu Mar 27 14:15:30 2014 +0000 + + sna: Support variable sized cursors + + One of the downsides with supporting large cursors is that the full size + is very rarely used leading to a waste of permanently allocated + resources. Refactor our cursor handling so that we can allocate fresh + cursors on the fly that are appropriately sized. + + Signed-off-by: Chris Wilson + +commit e3810cff42bca1badc5844002694a6f582c0f423 +Author: Chris Wilson +Date: Wed Mar 26 16:15:07 2014 +0000 + + sna: Move cursor reload into crtc notify + + This only needs to be done once per-screen reconfiguration. + + Signed-off-by: Chris Wilson + +commit 6bdd3b39bfddf1369656a6d182303e2058f6eb8f +Author: Chris Wilson +Date: Tue Mar 25 14:44:49 2014 +0000 + + sna: Tighten detection of GCs that translate to solid fills + + Signed-off-by: Chris Wilson + +commit 771b86e2a808bd74e7e2c316f8414766c2b267c6 +Author: Chris Wilson +Date: Tue Mar 25 10:27:23 2014 +0000 + + intel-virtual-output: Add DBG option to force 16 bit transfers + + Signed-off-by: Chris Wilson + +commit e46c196ecc8ad83f78f4f948b5dcb07906f249c2 +Author: Chris Wilson +Date: Wed Mar 26 12:17:37 2014 +0000 + + sna: Print probed maximum cursor size + + Signed-off-by: Chris Wilson + +commit a273b207b94933713b3dfd7edd3f6bb9b3e959b9 +Author: Chris Wilson +Date: Tue Mar 25 09:40:40 2014 +0000 + + intel-virtual-output: Fix damage iteration over active list + + When iterating over the active list to mark the current damage, we need + to chase the ->active pointer rather than ->next or else we walk the + wrong list from the wrong starting point. + + Reported-by: Kirill Müller + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76271 + Signed-off-by: Chris Wilson + +commit bfd51e205639b468479985c3c631e5d9c76d5fa7 +Author: Chris Wilson +Date: Tue Mar 25 08:59:58 2014 +0000 + + intel-virtual-output: Add a little more DBG around damaging clones + + Signed-off-by: Chris Wilson + +commit 278ef8f7bc0c7f63737ad5f5e967ca253c2571cb +Author: Chris Wilson +Date: Tue Mar 25 08:33:46 2014 +0000 + + intel-virtual-output: Do not detach with DBG enabled + + Since DBG is sent to stdout, we only see it if we do not daemonize + (which closes stdout). + + Signed-off-by: Chris Wilson + +commit 7addfcbf0f2f609ce2a5b8e9a75ee7efb483531c +Author: Chris Wilson +Date: Mon Mar 24 12:51:11 2014 +0000 + + sna: Remove one conditional from rendering glyphs into a mask + + Signed-off-by: Chris Wilson + +commit d3050dbaf74d6a5b5123eea13bc7710efea6257f +Author: Chris Wilson +Date: Mon Mar 24 12:39:37 2014 +0000 + + sna: Consolidate handling of uncacheable glyphs + + Signed-off-by: Chris Wilson + +commit 79399ff9264ff23da0ab95131a67d2ac85651b3d +Author: Chris Wilson +Date: Mon Mar 24 10:46:57 2014 +0000 + + sna: Eliminate a few conditionals in glyph fast path + + Signed-off-by: Chris Wilson + +commit 220accd828c5a0054ae9e3b491a434f7a6c750e0 +Author: Chris Wilson +Date: Thu Mar 20 09:03:31 2014 +0000 + + sna: Only enable cursor support if the hw cursor is supported + + Under a host, we naturally will not setup the cursor capability, and + this provides a safeguard in case we have a machine that does not + support hardware cursors. + + Signed-off-by: Chris Wilson + +commit 7cf0676ff868e7d8cdbfb264e5822250b1f59882 +Author: Chris Wilson +Date: Thu Mar 20 08:51:05 2014 +0000 + + intel: Do not close server fds + + If we are given an fd by the Xserver, then it is not our responsibility + to close it during CloseScreen. + + Signed-off-by: Chris Wilson + Cc: Hans de Goede + +commit 9f4c121974abcec77e7f920e3258a337260200b3 +Author: Chris Wilson +Date: Thu Mar 20 08:48:40 2014 +0000 + + intel: Refactor finding device path if unknown + + Since we already lookup the device path if we do not know it after + opening the fd, we can remove the special case along the legacy PCI + probe path. + + Signed-off-by: Chris Wilson + +commit 582adf067c275a18f55bb43945348b84cb7eb3c4 +Author: Chris Wilson +Date: Wed Mar 19 14:57:25 2014 +0000 + + 2.99.911 snapshot + +commit 6802ee00e52515ca886b956f6c0a0e27d708fb31 +Author: Chris Wilson +Date: Wed Mar 19 10:25:05 2014 +0000 + + sna: Assert after applying clipping that the draw rectangle is wholly contained + + Otherwise we ignore the purpose of applying the clip! + + Signed-off-by: Chris Wilson + +commit 15be6b7c9a89bfdac923d2a27649f539c430366f +Author: Chris Wilson +Date: Tue Mar 18 16:31:07 2014 +0000 + + uxa: Implement minimal flushing for bdw+ + + Based on the patch by Kenneth Graunke, + "Several places (such as intel_cache_expire) call intel_emit_batch_flush, + so it needs to work on Broadwell. Sometimes the batch is empty, in + which case current_batch may not yet be BLT_RING. + + The PIPE_CONTROL code has not been ported to work on Broadwell, so + trying to do a render ring flush will hang the GPU. It also doesn't + make any sense to do a render ring flush, given that we never use the + render ring for UXA on Broadwell." + + Cc: Kenneth Graunke + Signed-off-by: Chris Wilson + +commit 6446bf96f0cc01e730c240f7ed5c91f5d2292139 +Author: Hans de Goede +Date: Tue Mar 18 15:16:30 2014 +0100 + + intel: Don't close the fd on probe failure if it is server managed + + I hit this corner case when testing a single X server spanning both intel + gfx + an usb display link adapter driven by xf86-video-modesetting. + + In this scenario the intel driver gets its platformProbe method called first, + and if it then closes the server managed fd, the xf86-video-modesetting gets + EBADFD errors. + + Signed-off-by: Hans de Goede + +commit 4a6e09c6cdb13773bca5f6831f9f5164008699c9 +Author: Chris Wilson +Date: Tue Mar 18 15:52:19 2014 +0000 + + uxa: Add support for server managed fds (via intel_device) + + Based on the patch by Hans de Goede, this removes the handling of + drmOpen() and DRM_MASTER from within uxa and instead uses the common + routines. This reduces the duplicate code from within uxa, and enables + new features such as server managed fds. + + Cc: Hans de Goede + Signed-off-by: Chris Wilson + +commit dc66e663a06f2ce7685eba1fdf9fad01786bcb4f +Author: Chris Wilson +Date: Mon Mar 17 13:46:05 2014 +0000 + + sna: Improve guard against loading palettes whilst headless + + Whilst hosted, which is very similar to being headless, we do not even + have the kmode pointer and so checking kmode->count_crtcs is fatal. + + Signed-off-by: Chris Wilson + +commit 28ebbe8fa902a1d3ee4ecbda5041de5e7b68ada7 +Author: Chris Wilson +Date: Mon Mar 17 07:56:39 2014 +0000 + + sna: Fix logic inversion in use of imprecise transform conversion + + An accidental drop of the if (!is_translation) broke composite copies + under a transform. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76244 + Signed-off-by: Chris Wilson + +commit 57e63221ec0fa304a02beed356549cadb28bcf19 +Author: Chris Wilson +Date: Fri Mar 14 19:49:59 2014 +0000 + + intel-virtual-output: Minor DBG fixes + + Improve the summary after failing to detect MIT-SHM, and fix a DBG + + Signed-off-by: Chris Wilson + +commit 8cc1f005c69786243ac69f6505087071787e6f87 +Author: Chris Wilson +Date: Fri Mar 14 15:55:41 2014 +0000 + + intel-virtual-output: Iterate over remote outputs in the same order as listed + + If we walk the output lists in the same order as they are listed by + RandR, we are more likely to hit favourable priority sorting. E.g. the + user is likely to setup the outputs in the same order as listed, meaning + fewer CRTC transitions etc. + + Signed-off-by: Chris Wilson + +commit a55bbe3b598616ef4464e50cb9364c8cdf0b513a +Author: Chris Wilson +Date: Fri Mar 14 15:47:20 2014 +0000 + + intel-virtual-output: Disable panning before setting mode on CRTC + + For whatever reason, presumably to do with the switch between CRTCs, we + need to disable the panning before setting the mode in order for our + desired CRTC position to take effect. + + Reported-by: Jeff Katz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76146 + Signed-off-by: Chris Wilson + +commit 5079830bd5f01740c4cbf84888bdf7a93bb2868e +Author: Chris Wilson +Date: Fri Mar 14 14:34:48 2014 +0000 + + intel-virtual-output: Mode names are freed with ScreenResources + + So we have to be careful not to continue to reference the strings after + they may be freed. + + Signed-off-by: Chris Wilson + +commit c64d2572bafeacae25e9b58c8372ce91858c3832 +Author: Chris Wilson +Date: Fri Mar 14 13:08:43 2014 +0000 + + sna: Allow some leeway when deciding to discard common translations + + Under PictFilterNearest, we can ignore fractional translations (not all + renderers discard those.) And if we are being approximate, we can loosen + our tolerance as well. + + Signed-off-by: Chris Wilson + +commit b61e6398f0cf94d3c483e30c05ceae4a8383d16c +Author: Chris Wilson +Date: Fri Mar 14 11:32:38 2014 +0000 + + sna: Ensure we flush SHM pixmaps if rendering to a GPU shadow + + Normally, we try to render into the CPU bo of a SHM pixmap. However, under + the right circumstances we may try to do a series of rendering into the + GPU bo and then copy it back to the CPU bo. In that case, we need to be + sure to mark the pixmap as requiring the flush. + + Signed-off-by: Chris Wilson + +commit f47f192f2240d19ede0a3a59b7970e4f563f3195 +Author: Chris Wilson +Date: Fri Mar 14 09:17:36 2014 +0000 + + intel-virtual-output: Include extra debug information for modesets + + Signed-off-by: Chris Wilson + +commit 0ad54325e94c4fd144c9fbcba25c3d167b6c5e18 +Author: Chris Wilson +Date: Fri Mar 14 07:42:32 2014 +0000 + + intel-virtual-output: Disable remote CRTCs at startup + + Signed-off-by: Chris Wilson + +commit cbcc1b6190ab733c9ab11543af4a4eb1890225e4 +Author: Kenneth Graunke +Date: Thu Mar 6 13:12:32 2014 -0800 + + uxa: Enable BLT acceleration on Broadwell. + + This supports solid, copy, put_image, and get_image acceleration via the + BLT engine. RENDER acceleration (composite) and Xv would be piles of work, + which is not worth doing since SNA exists, and Glamor is coming. + + Signed-off-by: Kenneth Graunke + +commit c1d7abadbb0009e9f2b9d8d3744d4ae5c13a1c8f +Author: Kenneth Graunke +Date: Thu Mar 6 13:12:31 2014 -0800 + + uxa: Remove implicit length from BLT command #defines. + + These command packets grew on Gen8. + + Signed-off-by: Kenneth Graunke + +commit 44fe21018330e0ce750ce25be36cc780ccdb78eb +Author: Chris Wilson +Date: Thu Mar 13 08:52:45 2014 +0000 + + sna/gen6+: Simplify BLT vs RENDER decisions for fill ops + + Signed-off-by: Chris Wilson + +commit 5d8ded0dd671fbcbd212e06afbea88a7a56a8f0d +Author: Chris Wilson +Date: Thu Mar 13 08:51:29 2014 +0000 + + sna: Nullify extra fill.ops + + I forgot that the initial memset(&fill, 0, sizeof(fill)) was no longer + performed and we rely on explicit initialisation during the setup, so + add the missing fields. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76088 + Signed-off-by: Chris Wilson + +commit 923b158e5c5dd50f943fe315a058410aeaa76269 +Author: Chris Wilson +Date: Thu Mar 13 08:14:48 2014 +0000 + + intel: Fallback to drmGetDeviceNameFromFd() + + If we are not supplied the path, call the libdrm function to search for + the canonical name for our device. + + Signed-off-by: Chris Wilson + +commit 202787ffa2bae5b1455137a344dabb9d85ee3aa0 +Author: Chris Wilson +Date: Wed Mar 12 23:57:04 2014 +0000 + + sna: Restore asserts that we do not map a freed buffer + + The complication comes with stolen bo that we treat as purged (because + they have no backing storage we can access) and so require an extra + caveat. + + Signed-off-by: Chris Wilson + +commit 4368a74b1c904625158f0b6baf98ef2a60bb54d4 +Author: Chris Wilson +Date: Wed Mar 12 17:37:01 2014 +0000 + + sna: Add DBG around using pixman's glyph cache + + Signed-off-by: Chris Wilson + +commit 08d73f1a4499cfe7c3121ff2ecdd36729c5f3544 +Author: Chris Wilson +Date: Wed Mar 12 12:17:55 2014 +0000 + + sna: Only couple up a proxy->rq when inserting into the request->buffers list + + Otherwise, we may never decouple it again afterwards leading to a + dangling pointer dereference. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1289923 + Signed-off-by: Chris Wilson + +commit 2f50261539618c30c8470a5795fe5c2440e2318f +Author: Chris Wilson +Date: Wed Mar 12 10:51:56 2014 +0000 + + sna: Simplify code when no 64-bit registers are available in the ISA + + Signed-off-by: Chris Wilson + +commit 20026626d28b304a6156fb2c49752e18f2498de5 +Author: Chris Wilson +Date: Fri Mar 7 13:18:07 2014 +0000 + + sna: Missing fixes for using BLT points + + On a lone machine I had a vital fix for setting the destination tiling + bit inside the XY_PIXEL_BLT command. Sadly, I forgot about the fix before + the patch from another machine. + + Signed-off-by: Chris Wilson + +commit fd189c868908c81e7c57abf442ec1659efc2637a +Author: Chris Wilson +Date: Tue Mar 11 11:37:01 2014 +0000 + + sna/glyphs: Add a smattering of DBG for validating the glyph mask + + Signed-off-by: Chris Wilson + +commit d31569455ca25b7050a240cad58bea492c58194a +Author: Chris Wilson +Date: Tue Mar 11 10:46:06 2014 +0000 + + sna: Avoid using the wrong pitch for comparing replacement sizes + + Signed-off-by: Chris Wilson + +commit 8c5593037f31159532da992ae3b503c3b4a42f8e +Author: Chris Wilson +Date: Tue Mar 11 10:44:52 2014 +0000 + + sna: Assert that the pixmap pitch is initialised before use + + This is a sanity check that the pixmap is mapped for use by the CPU + prior to us actually using it. + + Signed-off-by: Chris Wilson + +commit dd1ff3230292a31d366c96b97711d7df97362093 +Author: Chris Wilson +Date: Tue Mar 11 10:06:24 2014 +0000 + + intel: Protect against a NULL platform device with server fd + + Signed-off-by: Chris Wilson + +commit 59f2f4885dbead3f2aece668f48c3ac749f724c2 +Author: Chris Wilson +Date: Tue Mar 11 10:00:27 2014 +0000 + + intel: Fix versioning of SUPPORTS_SERVER_FD + + The current snapshot is 1.15.99.901, which means that the new feature + will first be available in 1.15.99.902. + + Signed-off-by: Chris Wilson + +commit 78970676e79d462cf99509012db54479ba93c01a +Author: Chris Wilson +Date: Tue Mar 11 07:33:09 2014 +0000 + + sna: Be defensive when applying size restrictions to bo + + The assumption that all paths prevalidate the restrictions upon creation + the bo are false. Some important paths try to force the bo creation in + order to meet client expectations (e.g. DRI). So we are faced with + impossible requests which must fail, so make sure we do report those + failures. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1289049 + Signed-off-by: Chris Wilson + +commit d10a5abcbd7c751adc08e24d9f4bdc33596b6f12 +Author: Chris Wilson +Date: Fri Mar 7 19:44:07 2014 +0000 + + intel: Supply a fallback guess for the device path + + If for some reason we have an fd, but no device path, use the likely + default path (derived from and validated against the major/minor of the + open device fd). + + Signed-off-by: Chris Wilson + +commit 28cab948f50b1d67468edbd9c8e10d3d696155f5 +Author: Hans de Goede +Date: Fri Mar 7 14:13:38 2014 +0100 + + intel: Add support for server managed fds + + In the post-modern world, the platform device nodes are handed to a + non-privileged Xserver by systemd/logind. We can then query the core for + our assigned fd rather than try to open the device for ourselves (which + would fail when trying to obtain DRM_MASTER status). A consequence is + that we then do not directly control DRM_MASTER status and must act as a + delegate of systemd. + + Signed-off-by: Hans de Goede + +commit e5f8118bdbc4655d987ab1c52e0a46fa85cc92c4 +Author: Chris Wilson +Date: Mon Mar 10 22:12:39 2014 +0000 + + sna: DBG compilation fixups + + Signed-off-by: Chris Wilson + +commit 6ed8570f6aa01fdd4edc3df7585f01083b4a9778 +Author: Chris Wilson +Date: Mon Mar 10 16:39:50 2014 +0000 + + sna: Pass render hints for migration based on source location + + Signed-off-by: Chris Wilson + +commit 955b5de4ba103fb115ec0b45f9b59eb2628ca3dd +Author: Chris Wilson +Date: Mon Mar 10 16:38:54 2014 +0000 + + sna/glyph: Release the pixman glyph cache along the error paths + + If we lock the glyph cache and then hit an error, we must make sure we + release our lock. An easy way would be not to lock when we may err. + + Signed-off-by: Chris Wilson + +commit e1cb0284218aaf248e251ac0d12fee4bcd3c7650 +Author: Chris Wilson +Date: Mon Mar 10 15:01:10 2014 +0000 + + sna/gen2: Fix build after last minute patch editing + + Whoops, the selective editing of the patch left a trailing '{' and + breaking the build. + + Signed-off-by: Chris Wilson + +commit 142f8461944b294dbc3fb0a7bf607bccf0bccc1f +Author: Chris Wilson +Date: Mon Mar 10 15:20:16 2014 +0000 + + sna/gen2: Tidy blend factor selection for the source + + Signed-off-by: Chris Wilson + +commit 0075c90d3192ba90ff1ae8a7b04bfc3ff4fccda7 +Author: Chris Wilson +Date: Mon Mar 10 15:17:51 2014 +0000 + + sna/gen2: Fix alpha blending with 8bit destination surfaces + + On gen2 (like gen3), 8-bit destination surfaces are read into the Green + channel (and written to from the Green channel). Therefore the expected + alpha blending must instead be converted to colour blending. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75818 + Signed-off-by: Chris Wilson + +commit f0b70ca660416af42be8b3f76f9e38a81dcac464 +Author: Chris Wilson +Date: Fri Mar 7 08:16:50 2014 +0000 + + sna: Unroll finding bbox of points + + Signed-off-by: Chris Wilson + +commit 928453b1bc5a059a87fbcdba9156d318a0310073 +Author: Chris Wilson +Date: Fri Mar 7 08:15:21 2014 +0000 + + sna: Emit points using the BLT primitive when appropriate + + Signed-off-by: Chris Wilson + +commit a2b4f2657f8cd503fce4e3b8cc3240d7b45d36ce +Author: Chris Wilson +Date: Wed Mar 5 09:51:24 2014 +0000 + + sna/gen8: Correct MOCS settings for render targets + + Signed-off-by: Chris Wilson + +commit a7123410a33f29c67a11f26d17ce8b0dc09cc594 +Author: Chris Wilson +Date: Mon Mar 3 10:12:11 2014 +0000 + + NEWS: Fix dates for 2014 + + It has come to my attention that between December and January is + traditionally a New Year. + + Signed-off-by: Chris Wilson + +commit a3bfb4d3c15e6a37aba5d2f5ba92134c5186e3a4 +Author: Chris Wilson +Date: Fri Feb 28 08:47:21 2014 +0000 + + sna: Reorder writes during thread task decoupling + + So that the lockless reads do not see the task complete signal prior to + marking the task as successful. Otherwise, we falsely detect that the + thread trapped a signal and kill them all. + + Signed-off-by: Chris Wilson + +commit 37d080929a20bd969749c6c12d1ef4ebe236063f +Author: Chris Wilson +Date: Thu Feb 27 08:36:40 2014 +0000 + + sna: Limit the WHOLE_HINT to large PutImages + + The goal here is to predict when we are uploading an entire image though + multiple PutImage requests. If the image is small enough, then the + PutImage will be contained within a single request and the damage + tracking will be accurate. + + Signed-off-by: Chris Wilson + +commit 27ac9f574f65cbd535751c925e9b2e2d7c8a6b3a +Author: Chris Wilson +Date: Thu Feb 27 08:33:52 2014 +0000 + + sna: Avoid promoting region-to-whole migration and discarding damage + + Fixes regression from + commit 1de1104064b5898cbed37e836901694a381c1266 + Author: Chris Wilson + Date: Fri Feb 21 22:43:04 2014 +0000 + + sna: Use a hint to do whole image uploads inplace + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75549 + Signed-off-by: Chris Wilson + +commit ff49944928c7399527b11bb0da7699711591c21a +Author: Chris Wilson +Date: Fri Feb 21 21:21:46 2014 +0000 + + sna: Tighten assertion for tiling blt fallbacks + + Signed-off-by: Chris Wilson + +commit cf4683209d11ca7382079feb242cc0c07fefc402 +Author: Chris Wilson +Date: Sat Feb 22 20:17:08 2014 +0000 + + sna/gen6+: Add missing DBG argument + + Signed-off-by: Chris Wilson + +commit a4d23ff3b2a75cc5a1c65b6b8464fc639c9f90b8 +Author: Chris Wilson +Date: Sat Feb 22 19:35:40 2014 +0000 + + sna: Add DBG for why trapezoids may be preferred inplace + + Signed-off-by: Chris Wilson + +commit d316d14283d8af86e4c5020f9974280570a78959 +Author: Chris Wilson +Date: Sat Feb 22 19:31:39 2014 +0000 + + sna: Include mono/precise hints in trapezoids DBG + + Signed-off-by: Chris Wilson + +commit 2a144baec87b17ead36373a8c5fd80f37be3ac19 +Author: Chris Wilson +Date: Sat Feb 22 19:19:11 2014 +0000 + + sna: Add a little more DBG to watch the flow of allocated bo sizes + + Signed-off-by: Chris Wilson + +commit 921e9aff3f8e7c4a33c352241311aeb4df3011fc +Author: Chris Wilson +Date: Sat Feb 22 18:29:27 2014 +0000 + + sna: Avoid signed overflow when printing allocated bytes in DBG + + Signed-off-by: Chris Wilson + +commit b0b6c043c997732559a971a788c24a5a73812df4 +Author: Chris Wilson +Date: Sat Feb 22 18:22:38 2014 +0000 + + sna: Cleanup caches if execbuf fails + + One of the failure modes for execbuf is running out of memory - often + this is reported as a false ENOSPC (thanks shmemfs!). Because of this, + we should try to resubmit after we purge our caches. + + Signed-off-by: Chris Wilson + +commit bfef9916124973b5e08f9b32eb1fcfb400ee4e8b +Author: Chris Wilson +Date: Sat Feb 22 18:12:24 2014 +0000 + + sna: Propagate thread signals for extra DBG + + Signed-off-by: Chris Wilson + +commit 64fc1bb9c87e95ff484ecd11f391b1c0d556d584 +Author: Chris Wilson +Date: Sat Feb 22 14:34:05 2014 +0000 + + sna: Allow SIGBUS/SEGV to kill the thread + + To handle sigtrapping of the threads, we allow the threads to handle + their async signals and upon hitting the trap, we kill the thread. All + the rest of the threads are reaped by the main xserver thread + afterwards. + + Signed-off-by: Chris Wilson + +commit 900499bff962a63e1d9b5f808d1deb65d55754a2 +Author: Chris Wilson +Date: Sat Feb 22 13:58:11 2014 +0000 + + sna: Move sigtrap wrapping closer to threaded sw composite + + Signed-off-by: Chris Wilson + +commit aae3bfeb28ca86b416a6a4de71eb23cdb46cf9de +Author: Chris Wilson +Date: Sat Feb 22 12:44:16 2014 +0000 + + sna: Assert that sigtrap is active + + Curiouser and curiouser. + + Signed-off-by: Chris Wilson + +commit 75cff26ebad33aca7ade7aa5a650235a7d42e47c +Author: Chris Wilson +Date: Sat Feb 22 10:05:41 2014 +0000 + + sna: Apply the dst offset for pixman fills + + Along one of the sw blt paths we failed to apply the offset for + Composite redirection. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73811 + Signed-off-by: Chris Wilson + +commit 59d471de7fc7581b112f37a68714d0e1f8728dfd +Author: Chris Wilson +Date: Sat Feb 22 08:35:50 2014 +0000 + + sna: Handle asynchronous signals from threads + + By killing the threads and leaking their allocations - marginally + preferrable to losing the entire Xserver. + + Signed-off-by: Chris Wilson + +commit 1de1104064b5898cbed37e836901694a381c1266 +Author: Chris Wilson +Date: Fri Feb 21 22:43:04 2014 +0000 + + sna: Use a hint to do whole image uploads inplace + + Signed-off-by: Chris Wilson + +commit 2c0aacb869bea34620a2b0029ddfa7f2a9513dc7 +Author: Chris Wilson +Date: Fri Feb 21 21:48:36 2014 +0000 + + sna: Allow allocation to fail even when debugging + + Let the malloc failure propagate rather than assert. + + Signed-off-by: Chris Wilson + +commit cb87b179532a9b533df458f3367fde7fc3d64d0c +Author: Chris Wilson +Date: Fri Feb 21 21:41:52 2014 +0000 + + sna: Wrap inplace trapezoid operators with SIGBUS protection + + For the moment, this still leaves open the vexing question of how to + protect the multi-threaded variants, but it should provide more shelter + for extreme OOM. + + Signed-off-by: Chris Wilson + +commit b6fc46d63c5b7bc1347d4e03e71df9e6fdbcaaab +Author: Chris Wilson +Date: Fri Feb 21 21:21:46 2014 +0000 + + sna: Tighten assertion for tiling blt fallbacks + + Signed-off-by: Chris Wilson + +commit be6d218c6888bce41e15a8e4899618b5e6eacd99 +Author: Chris Wilson +Date: Fri Feb 21 19:43:30 2014 +0000 + + sna: Do not attempt fallback configuration without any CRTCs + + The fallback xf86InitialConfiguration() is another function that may + explode if called without any CRTCs attached. + + Signed-off-by: Chris Wilson + +commit 769a959d84d7e573b11cc1a7d85c122f17dfeea0 +Author: Chris Wilson +Date: Fri Feb 21 13:43:09 2014 +0000 + + sna: Do not register colormaps without any CRTCs + + The xserver may crash if we try to setup colormap handling without any + CRTCs, so don't. + + Suggested-by: Dave Airlie + Signed-off-by: Chris Wilson + +commit 0b92b1285ce553c4f475c7fb8ac57ba418009682 +Author: Chris Wilson +Date: Thu Feb 20 19:18:46 2014 +0000 + + backlight: Make search routine for device specific backlight common + + Signed-off-by: Chris Wilson + +commit caaf52834015c084704cf638f453b1fc3316eaa9 +Author: Chris Wilson +Date: Thu Feb 20 07:51:40 2014 +0000 + + sna: Query cursor size from the kernel + + Signed-off-by: Chris Wilson + +commit c91af569ee90a832899c9038badd84921e9a87fc +Author: Mark Kettenis +Date: Tue Feb 18 19:02:14 2014 +0000 + + backlight: Build fixes for OpenBSD + + Chris would like to humbly apologise for making these changes to the + OpenBSD code blind, and to thank Mark and Jonathan for their support + and understanding. + +commit ecc20fbcf8d5adb6c3b7d005c01788e35bba9d3c +Author: Chris Wilson +Date: Tue Feb 18 07:56:07 2014 +0000 + + intel-virtual-output: Discard unwanted events from the mouse recorder + + X always sends MappingNotify events (there is no way for the client + to ignore them). In particular, MappingNotify would be sent after a VT + switch, and this would knock out our ability to track the cursor.. + + Reported-by: Raul Dias + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75115 + Signed-off-by: Chris Wilson + +commit e860b3eaedcb5d56745d5bcc9ce720e9a0e9c293 +Author: Hans de Goede +Date: Mon Feb 17 13:16:54 2014 +0100 + + backlight-helper: Simplify reading the level from stdin + + Since the helper is a standalone app, the usual xserver rules of not using + stdio because of signal handling don't apply. + + And since the helper does run with elevated rights, it is important to keep + the code KISS so that it can be audited easily. + + This commit replaces the hard to read "raw" read loop with a much simpler + loop using fgets, improving readability of the code. + + Signed-off-by: Hans de Goede + +commit b5229c6e15964e723a7bb99d3c2c20a2fa168e3b +Author: Hans de Goede +Date: Mon Feb 17 13:16:53 2014 +0100 + + backlight: Drop rights before executing pkexec + + Event though we've failed to open the backlight normally, we may still be + running under a suid-root xserver, so drop any elevated rights before + executing what we hope will be pkxec. + + Signed-off-by: Hans de Goede + +commit 27a9dc4ce8fa3ba56f68e04d11a6272348772039 +Author: Hans de Goede +Date: Mon Feb 17 13:16:52 2014 +0100 + + backlight: Use System instead of system when checking for pkexec + + Even though we've failed to open the backlight normally, we may still be + running under a suid-root xserver, so use the servers build in System instead + of system so as to properly drop root rights. + + Signed-off-by: Hans de Goede + +commit 06066b7269b5ccf502c27466ad0434adfd9e3866 +Author: Hans de Goede +Date: Mon Feb 17 13:16:51 2014 +0100 + + backlight: Explain better why we support both pkexec and suid root for the helper + + Update the comment about trying suid-root first with some explanations of + why pkexec may be preferable in some cases. + + Signed-off-by: Hans de Goede + +commit 6b5c2b4515b646db6be0f9307f53651620516521 +Author: Chris Wilson +Date: Sat Feb 15 21:03:49 2014 +0000 + + backlight: tidy use of BACKLIGHT_CLASS + + Use string concantenation to simply the sprintf slightly. + + Signed-off-by: Chris Wilson + +commit eb7d2b19e2829b00317991fba05352e3ba1a1902 +Author: Chris Wilson +Date: Sat Feb 15 21:00:57 2014 +0000 + + backlight: Reject user overrides on OpenBSD + + We only handle the singular wscons OpenBSD interface for backlight, so + explicitly reject any user requests for something else. + + Signed-off-by: Chris Wilson + +commit 268842a47f05508fc7e1c69cd21e8e66a000dcde +Author: Chris Wilson +Date: Sat Feb 15 19:54:30 2014 +0000 + + backlight: Amalgamate hardcoded priority tables + + Our fallback path for finding the backlight interface uses a hardcoded + table of known backlight controllers in proirity order. Rather than + maintain this table twice in the midst of the KMS logic, push it to the + new set of common backlight routines. + + This incorporates bugfixes from SNA to handle unknown backlights, but + usable, gracefully. + + Signed-off-by: Chris Wilson + +commit b71f3d8bd4d6773899c1bdc903911cf240e68ead +Author: Jan Alexander Steffens (heftig) +Date: Sat Feb 15 17:53:16 2014 +0100 + + Backlight helper build fixes + + Don't hardcode $(prefix)/libexec + + Fix install hook when DESTDIR is set + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75028 + +commit 3d629c91cfa98b75c6685c2a2003e64fd1b612c4 +Author: Chris Wilson +Date: Sat Feb 15 14:55:09 2014 +0000 + + intel: Add a helper for setting backlight without root rights + + Once the xserver stops running as root on kms capabable systems, we will need + some other way to access the backlight. + + The approach taken in this patch moves most of the heavy lifting to a + helper that runs with root privileges and pipes our requested brightness + into the sysfs backlight interface. Where required, we use pkexec to + launch the helper with the elevated privilege. + + v2: Amalgamate much more of the duplicate code. + Keep the daemon and pipe alive for the lifetime of the backlight interface. + Provide an alternative for systems without PolicyKit. + + Signed-off-by: Hans de Goede [v1] + Signed-off-by: Chris Wilson + +commit a01548ccf192a5b1fa1f4a3e31e1634db39f6b39 +Author: Hans de Goede +Date: Sat Feb 15 00:02:36 2014 +0100 + + intel: export fd_set_cloexec / fd_set_nonblock + + Allow fd_set_cloexec / fd_set_nonblock to be used outside of intel_device.c. + + Signed-off-by: Hans de Goede + +commit 5601f8cc330fe88eadfa7238659c5abb223e3b28 +Author: Hans de Goede +Date: Sat Feb 15 00:02:35 2014 +0100 + + intel: Fix fd_set_nonblock + + O_NONBLOCK is a status flag not a descriptor flag, so F_GETFL / F_SETFL should + be used to modify it. + + Signed-off-by: Hans de Goede + +commit 8eb6335653e6e38228ecf95c3eef82ca2a864e45 +Author: Chris Wilson +Date: Fri Feb 14 19:36:47 2014 +0000 + + sna: Inherit the native rotation on initial output probing + + Signed-off-by: Chris Wilson + +commit 5f8714335729b4fbbb33d89dbaf0f13aa3d8427b +Author: Chris Wilson +Date: Fri Feb 14 16:18:34 2014 +0000 + + sna: Reorganise native rotation ioctls to compile on old Linux + + It is not just the BSDs that lack these ioctls in their userspace + headers, but everything older than about a year... + + Signed-off-by: Chris Wilson + +commit 699bde3991624c25d3b731caf7129ed87710b3b3 +Author: Chris Wilson +Date: Fri Feb 14 15:11:21 2014 +0000 + + sna: Guard use of DRM_MODE_OBJECT type ids + + These are not currently exported on OpenBSD and cause the build to fail. + Hide their use behind an ifdef guard for the time being. + + "I noticed the following when trying to compile xf86-video-intel git on OpenBSD: + + /usr/users/jsg/src/xf86-video-intel/src/sna/sna_display.c:2106: error: 'DRM_MODE_OBJECT_CRTC' undeclared (first use in this function) + /usr/users/jsg/src/xf86-video-intel/src/sna/sna_display.c:2106: error: (Each undeclared identifier is reported only once + /usr/users/jsg/src/xf86-video-intel/src/sna/sna_display.c:2106: error: for each function it appears in.) + /usr/users/jsg/src/xf86-video-intel/src/sna/sna_display.c:2107: error: 'DRM_MODE_OBJECT_PLANE' undeclared (first use in this function)" + + Reported-by: Jonathan Gray + Signed-off-by: Chris Wilson + +commit 37dbd669415ac82a79b3699da0450aaf68cb1c4c +Author: Chris Wilson +Date: Fri Feb 14 14:53:14 2014 +0000 + + sna: Check that the backlight interface is in sysfs before access + + Before we write values into the file, we want to be sure that it is our + sysfs backlight interface, and not some ordinary file we are about to + destroy. + + Signed-off-by: Chris Wilson + +commit 3a893d14cd227454826a9a86cb3ce227d04bc352 +Author: Chris Wilson +Date: Thu Feb 13 22:46:22 2014 +0000 + + sna: Increase the acceptable screen size range + + Signed-off-by: Chris Wilson + +commit 2d9fcb3f729e3959dd30b7d7859438894b806b34 +Author: Chris Wilson +Date: Thu Feb 13 22:36:36 2014 +0000 + + sna: Filter out requests to create a 0x0 frontbuffer + + Attempting to create a 0x0 frontbuffer results in erroneous pixmap + generation, and is liable to explode at a random point in future, so + just reject it outright. + + Signed-off-by: Chris Wilson + +commit 1037a1a3f6a8dbde017a28a7b59ef5398c84dba1 +Author: Chris Wilson +Date: Thu Feb 13 21:36:26 2014 +0000 + + sna: Fix comparison of previous BLT commands + + After altering the command bits to accommodate Broadwell, we needed to + fixup the comparison of previous BLT commands to detect overwritten + commands. + + Signed-off-by: Chris Wilson + +commit 9a9f6a9487201e4c80338e771eec28067f044240 +Author: Chris Wilson +Date: Thu Feb 13 16:18:43 2014 +0000 + + uxa: Check for access to backlight interface + + Before attaching properties to any connector, check that we can indeed + control the backlight through the sysfs interface by doing an access + check. If the xserver is started without root privileges, we cannot + write through /sys/class/backlight and so should take care not to + advertise that we can. + + Reported-by: Hans de Geode + Signed-off-by: Chris Wilson + +commit 611490a176d9bfd136f4340f7c31e0e0f0beea4e +Author: Chris Wilson +Date: Thu Feb 13 16:18:43 2014 +0000 + + sna: Check for access to backlight interface + + Before attaching properties to any connector, check that we can indeed + control the backlight through the sysfs interface by doing an access + check. If the xserver is started without root privileges, we cannot + write through /sys/class/backlight and so should take care not to + advertise that we can. + + Reported-by: Hans de Geode + Signed-off-by: Chris Wilson + +commit 83d17cded854871fd41cd3fcf25f38c9b67a4705 +Author: Chris Wilson +Date: Thu Feb 13 12:57:50 2014 +0000 + + sna: Clear DPMS tracking on VT switch + + Assume the worst and force us to reset the property when we restore + control. + + Signed-off-by: Chris Wilson + +commit 135da294106f7158bb68eeeb9e6c171bcddd94f3 +Author: Chris Wilson +Date: Thu Feb 13 11:58:15 2014 +0000 + + sna: Extend native rotation support to sprites + + The sprite plane can be independently rotated to the CRTC primary plane. + To rotate the sprite plane, we just set a property on the plane similar + to how we rotate the CRTC, so we can refactor them together to use the + same routines. + + Signed-off-by: Chris Wilson + +commit e35017e36e45c57ea9847eb5c8466cac3c4d2cc4 +Author: Chris Wilson +Date: Thu Feb 13 14:46:39 2014 +0000 + + sna: Enable coordinate transforms for native CRTC rotation + + Otherwise X tells Clients that the cursor is still in the unrotated + location when it appears rotated on the display. + + Signed-off-by: Chris Wilson + +commit 72e909953c1865f86fbd6325ff807d7c7357af5f +Author: Chris Wilson +Date: Thu Feb 13 09:46:13 2014 +0000 + + Revert "uxa: Do not change DPMS mode on unconnected outputs" + + This reverts commit 4497212307dee5e35bc6836201738a2fdb559020. + + Unfortunately, this simple fix does not work for UXA as DPMS is used by + the xserver to turn off CRTCs and outputs. Since UXA does not implement + CRTC DPMS, this commit causes us to fail to turn off outputs. + + The kernel has been fixed up in the meantime and that commit has been + recommended to be backported to all stable kernels: + + commit c9976dcf55c8aaa7037427b239f15e5acfc01a3a + Author: Chris Wilson + Date: Sun Sep 29 19:15:07 2013 +0100 + + drm/i915: Only apply DPMS to the encoder if enabled + + so it should be safe for UXA to rely on its old behaviour. + + Bugzilla: https://code.google.com/p/chromium/issues/detail?id=341135 + References: https://bugs.freedesktop.org/show_bug.cgi?id=68030 + Suggested-by: Dominik Behr + Signed-off-by: Chris Wilson + +commit 1c5ccf5d9d8beb7e8343eb2d07bbf97f53c1a224 +Author: Chris Wilson +Date: Thu Feb 13 01:06:41 2014 +0000 + + sna: Always assign a name to the modes + + In some cases, such as querying the mode from the CRTC, we may not have + a name associated with the mode. However, RandR always expects a valid + name. To satisfy this requirement, always generate the canonical mode + name if no other is specified. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70132 + Signed-off-by: Chris Wilson + +commit fb89bfc73f4103ca6116c8f91970f4bfa491636c +Author: Chris Wilson +Date: Wed Feb 12 16:41:51 2014 +0000 + + sna/gen5: Flush the render cache between operations + + When we change the blend mode between operations, it appears that we + must flush the render cache or else we risk render corruption. This is + usually noticeable in rendering of single glyphs. + + This was originally fixed for bug 51422, but was reintroduced by + commit 37eb7343be1aeeb90a860096756603a577df1a77 + Author: Chris Wilson + Date: Sat Dec 1 09:40:11 2012 +0000 + + sna/gen5: Inspired by gen4, reorder the flushing + and the desire to reduce the impact of this w/a. + + Reported-by: itumaykin@gmail.com + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74882 + Signed-off-by: Chris Wilson + +commit 564a766a6bbe8bcf2480248a54059e7d6727440d +Author: Chris Wilson +Date: Wed Feb 12 16:19:25 2014 +0000 + + intel-virtual-output: Do not resize the screen whilst all outputs are off + + If all the outputs are off, we try to resize the screen to 1x1, which is + typically illegal. So, just keep the existing screen and xfer buffer for + next time it is enabled. + + Signed-off-by: Chris Wilson + +commit 87b9d9f507885ed98d7249940218631b775d30ea +Author: Chris Wilson +Date: Wed Feb 12 15:48:20 2014 +0000 + + intel-virtual-output: Force an output probe on initial connection to remote display + + Signed-off-by: Chris Wilson + +commit dda57f2e28e01ea254cb2aba9e0846b755c4175a +Author: Chris Wilson +Date: Wed Feb 12 15:47:00 2014 +0000 + + intel-virtual-output: Fix checking for no change in output modes + + Signed-off-by: Chris Wilson + +commit 94e5ca3d5ab33c8e9b86a4f60c712da72df15b3d +Author: Chris Wilson +Date: Wed Feb 12 15:13:42 2014 +0000 + + intel-virtual-output: Always requery modes after OutputNotify + + References: https://bugs.freedesktop.org/show_bug.cgi?id=74800 + Signed-off-by: Chris Wilson + +commit d84940cc9d297df00477c838b4f53883c19a1da4 +Author: Chris Wilson +Date: Wed Feb 12 14:48:24 2014 +0000 + + intel-virtul-output: Double check timestamps + + Compare both res->timestamp and res->configTimestamp for changes in + state. + + Signed-off-by: Chris Wilson + +commit 607737cc47788e2a8896fddfece907a3cfb24f7f +Author: Chris Wilson +Date: Wed Feb 12 11:33:45 2014 +0000 + + sna: Support native primary plane rotations + + Use the display hardware for simple rotations, when exported through the + rotation property on the CRTC. + + As the kernel support is not yet merged upstream, the feature is hidden + behind --enable-rotation. + + Signed-off-by: Chris Wilson + +commit 3b43630f5525a60e935dbc46e70354bb45444814 +Author: Chris Wilson +Date: Wed Feb 12 10:43:46 2014 +0000 + + Revert "sna/gen6: Serialise write to DERRMR register using STORE_REGISTER_MEM" + + This reverts commit 2a5ad9c015bbb41550536dd3cf4ad18b7f21fd80. + + Oops, pushed from the wrong machine and merged in a incomplete bugfix + branch. + + Signed-off-by: Chris Wilson + +commit fb69bd16a30cd0449fa9bb603dacd001e777b5bb +Author: Chris Wilson +Date: Wed Feb 12 10:34:34 2014 +0000 + + sna/gen5: Use the DBG option ALWAYS_FLUSH to force a full flush + + When flushing between operations, we can choose between doing a full + flush to memory, or just a pipeline flush. For debugging it is better to + do the full flush to rule out cache effects. + + Signed-off-by: Chris Wilson + +commit 77f8d9ca84342b256de1e118edfd14ddae4d593f +Merge: 3fb39d4 27663f3 +Author: Chris Wilson +Date: Wed Feb 12 10:32:50 2014 +0000 + + Merge branch 'master' of hsw:/usr/src/xf86-video-intel + +commit 27663f31163c22f7dfaf8f5a3e45fa1c93a7d9e4 +Author: Chris Wilson +Date: Wed Feb 12 09:58:06 2014 +0000 + + sna/gen5: Add a DBG option to force flushes between operations + + Signed-off-by: Chris Wilson + +commit 834e8078fc1b8d3acba9fa887d6dcdd861e3c15a +Author: Chris Wilson +Date: Wed Feb 12 09:50:35 2014 +0000 + + sna: Retrieve tiling for fbcon + + Yikes, there appear to be tiled fbcon framebuffers on the horizon. + + Signed-off-by: Chris Wilson + +commit 69d4c15d525065374de50d624388252152a36b8b +Author: Chris Wilson +Date: Wed Feb 12 07:56:10 2014 +0000 + + sna: Delete redundant branch + + The MOVE_READ else branch is repeated immediately below when marking up + damage for MOVE_WRITE, so remove it for simplicity. + + Signed-off-by: Chris Wilson + +commit ec39adc93a4a127b34704a2012182b5c72b3a9b3 +Author: Chris Wilson +Date: Tue Feb 11 23:08:35 2014 +0000 + + Record Video ABI version that we configure against + + Signed-off-by: Chris Wilson + +commit 3fb39d477909a433ae67bdfc69ad870ddabee3a7 +Merge: 2a5ad9c c02067d +Author: Chris Wilson +Date: Tue Feb 11 21:57:23 2014 +0000 + + Merge branch 'master' of hsw:/usr/src/xf86-video-intel + +commit c02067dcf514f19beb0e17b5765826148386e673 +Author: Chris Wilson +Date: Tue Feb 11 21:21:17 2014 +0000 + + sna: Defer move-to-gpu until we need to transfer GPU damage to CPU + + When preparing a pixmap for CPU rendering, one of the last steps is to + copy the outstanding GPU damage back to the CPU. Currently, we flush any + outstanding pageflips (for TearFree) and in the process accidentally + destroy the shadow buffer if there is no outstanding GPU damage. Rearrange + the code to avoid tripping over that by only processing the move-to-gpu if + we need to touch the GPU bo. + + Signed-off-by: Chris Wilson + +commit 2a5ad9c015bbb41550536dd3cf4ad18b7f21fd80 +Author: Chris Wilson +Date: Tue Feb 11 11:23:37 2014 +0000 + + sna/gen6: Serialise write to DERRMR register using STORE_REGISTER_MEM + + Signed-off-by: Chris Wilson + +commit 5142d1ca3fd877f2ca9277af314f6432580370de +Author: Chris Wilson +Date: Mon Feb 10 16:42:06 2014 +0000 + + sna: Remove damaged region after converting CPU bo to GPU bo + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461 + Signed-off-by: Chris Wilson + +commit 1267235fd474c5249d45a7015e3d741dc607e57f +Author: Chris Wilson +Date: Mon Feb 10 16:37:38 2014 +0000 + + sna: Check for overwriting damage before applying clear + + Signed-off-by: Chris Wilson + +commit 2f99070708ce8f591c31e1e908809a0ce551c13f +Author: Chris Wilson +Date: Mon Feb 10 14:19:53 2014 +0000 + + sna: Clear GPU damage flag for 1x1 writes onto a clear buffer + + An optimisation for 1x1 reads of a clear buffer lead to a bug whereby + the damage for a 1x1 write would not be tracked correctly (conflicting + full GPU damage vs partial CPU damage). + + Signed-off-by: Chris Wilson + +commit 2fb2cd092dadba40b5ad2da57943c660a0c9bc14 +Author: Chris Wilson +Date: Mon Feb 10 09:35:11 2014 +0000 + + 2.99.910 snapshot + +commit 37d8566ee78c67647b159a96ddb2675d1506b967 +Author: Chris Wilson +Date: Sun Feb 9 12:28:27 2014 +0000 + + sna/gen6: Restore stall dropped when not flushing instead + + commit 82e6d41c2f4f343bd1854d3d8ee4b624b5d68971 + Author: Chris Wilson + Date: Thu Oct 31 13:35:59 2013 +0000 + + sna/gen6: Tweak flush around CC state changes + + Replaced the pipeline stall with a flush - but only when the target was + dirty. The missing stall however seems to be required as well. + + v2: Actually emit the stall for all CC state changes [Ilia Mirkin] + + Reported-by: Ilia Mirkin + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72375 + Signed-off-by: Chris Wilson + +commit 823382d28944a319c207f20ecef25ce1707a8021 +Author: Chris Wilson +Date: Thu Feb 6 10:13:41 2014 +0000 + + sna: And clear drawable->id on reused pixmaps + + References: https://bugs.freedesktop.org/show_bug.cgi?id=74550 + Signed-off-by: Chris Wilson + +commit 6fc46adb18a8410074c12d6e8979ef01813ebdf2 +Author: Chris Wilson +Date: Thu Feb 6 09:24:17 2014 +0000 + + uxa: Do not expose TextureVideo Xv adapters when acceleration is disabled + + Signed-off-by: Chris Wilson + +commit 1eadd1d0b1c8bcbf11eb7c0e112d1e424b63c25e +Author: Chris Wilson +Date: Thu Feb 6 09:04:30 2014 +0000 + + sna: Add some DBG to clarify the source pixmap (for tiles) + + Signed-off-by: Chris Wilson + +commit 4d1a2ef9553c663bb97b56adde6f6b41241ff528 +Author: Chris Wilson +Date: Thu Feb 6 08:29:20 2014 +0000 + + sna: Reset composite offsets when reusing freed pixmaps + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74550 + Signed-off-by: Chris Wilson + +commit 79d2f96bdfa0d7ae1567bf4b57b4f86aae424f50 +Author: Chris Wilson +Date: Wed Feb 5 15:30:30 2014 +0000 + + sna: Add some DBG around tiled blts + + References: https://bugs.freedesktop.org/show_bug.cgi?id=74550 + Signed-off-by: Chris Wilson + +commit 02eceefa2909075aca0ba3df7fdba835079aeb78 +Author: Chris Wilson +Date: Wed Feb 5 11:41:42 2014 +0000 + + sna: Pass read hints from move-to-cpu to wait_for_shadow + + Signed-off-by: Chris Wilson + +commit de73c5fd1cd4f948b8bd3582ae788f6f855c5b16 +Author: Chris Wilson +Date: Tue Feb 4 20:57:24 2014 +0000 + + sna: Tweak assert_bo_retired() to be callable on cached bo + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73406 + Signed-off-by: Chris Wilson + +commit 0906769c1b92520351729c4d8f2ab684d3ddf2eb +Author: Chris Wilson +Date: Tue Feb 4 17:51:51 2014 +0000 + + sna: Rearrange assertion to ease use of substitute cached bo + + Since we call kgem_bo_submit() along one path when synchronising a + cached bo (which is known to be inactive) but still want to keep the + assertion on the refcnt, simply rearrange the code to only assert on the + active path. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73406 + Reported-by: Matti Hamalainen + Signed-off-by: Chris Wilson + +commit fc001615ff78df4dab6ee0d5dd966b723326c358 +Author: Chris Wilson +Date: Tue Feb 4 10:36:21 2014 +0000 + + sna/gen4: Disable use of pipecontrol invalidates again + + One day, just not today, we may make gen4 work correctly, efficiently and + fast. Today, we can barely pick one. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit c6a21f0355447d398a8b857ad046cd27141d4744 +Author: Chris Wilson +Date: Tue Feb 4 08:51:17 2014 +0000 + + sna/glyphs: Reset composite state between switching glyph formats + + One path uses the mask channel, the other does not. We cannot rely on + overwriting all reused state in this case, and so we must clear the + composite state prior to use each time. + + Reported-by: Arkadiusz Miskiewicz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74494 + Signed-off-by: Chris Wilson + Tested-by: Arkadiusz Miskiewicz + +commit 1cbc59a917e7352fc68aa0e26b1575cbd0ceab0d +Author: Edward Sheldrake +Date: Mon Feb 3 09:34:33 2014 +0000 + + sna/gen4,5: Fix setting pipe control cache flush bits + + Cache flush bits are on dword 0, not 1, on gen4 and gen5. Also texture + cache invalidate is only available from Cantiga onwards. + +commit 7f08250a8960f90f6bd34de8c4a17870703bfa60 +Author: Chris Wilson +Date: Sun Feb 2 03:52:11 2014 +0000 + + sna: Reconstruct damage for the partially replaced discarded CPU bo + + Signed-off-by: Chris Wilson + +commit 853588ad5be9407d2123f6055458ca84e72b8eb9 +Author: Chris Wilson +Date: Sat Feb 1 21:55:09 2014 +0000 + + sna: If IGNORE_CPU is not set we must mark the move as MOVE_READ + + Logic reversal in discarding CPU damage. An old bug revealed by the more + aggressive attempts to discard CPU damage. + + Signed-off-by: Chris Wilson + +commit 8b0748c57ee4c38ea98c4b6ca18cb2b99f8f9ed4 +Author: Chris Wilson +Date: Sat Feb 1 21:54:43 2014 +0000 + + sna: Add some more DBG for choosing render targets + + Signed-off-by: Chris Wilson + +commit ed8d4f0ce3bff662d02063528df64d478ac0dc00 +Author: Chris Wilson +Date: Sat Feb 1 21:38:47 2014 +0000 + + sna: Skip discarding CPU bo when using as a render target + + The issue with unwanted serialisation does not affect the async + move-to-cpu of a render target. + + Signed-off-by: Chris Wilson + +commit 26613b046012f0ad968a15ab6bdfa8f6a6652e77 +Author: Chris Wilson +Date: Sat Feb 1 21:37:41 2014 +0000 + + sna: Allow more inplace promotions of CPU to GPU bo + + If the CPU bo is wholly damaged, then it makes an ideal candidate for + simply converting into the GPU bo. + + Signed-off-by: Chris Wilson + +commit 699b4fd3139d1d6d02911d6c8f193ead3445f613 +Author: Chris Wilson +Date: Sat Feb 1 20:13:53 2014 +0000 + + sna: Undo region translation before returning + + Signed-off-by: Chris Wilson + +commit 2c4b2ed558bec3b71077fb12cc4e008cccc819fa +Author: Chris Wilson +Date: Sat Feb 1 17:59:29 2014 +0000 + + 2.99.909 snapshot + +commit 495bf89496a96eff0b2c5b6a95aa29df8d7fbc81 +Author: Chris Wilson +Date: Sat Feb 1 18:57:06 2014 +0000 + + sna: Apply drawable offsets to partial CPU damage being replaced + + Signed-off-by: Chris Wilson + +commit 2ba8d40bf7e4d3e8fa541c001f82aa65f26bed3a +Author: Chris Wilson +Date: Sat Feb 1 18:13:04 2014 +0000 + + sna: Don't discard the GPU prior to using it for stashing CPU damage + + Signed-off-by: Chris Wilson + +commit 534f19dc5a302828fe60d0f4747ad0dc9617e1a9 +Author: Chris Wilson +Date: Sat Feb 1 17:56:58 2014 +0000 + + sna: Remark the region as damaged after uploading the rest to the GPU + + If we upload outside of the replaced region to the GPU, we need to + remark the region of operation as dirty. + + Signed-off-by: Chris Wilson + +commit 2814748b91c80c8935ea2f366e954a80bef69bb0 +Author: Chris Wilson +Date: Sat Feb 1 17:37:42 2014 +0000 + + sna: Only discard CPU damage for an replacing region + + When considering move-region-to-cpu, we need to take into account that + the region may not replace the whole drawable, in which case we cannot + simply dispose of an active CPU bo. + + Reported-by: Bas Nieuwenhuizen + Reported-by: Conley Moorhous + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74327 + Signed-off-by: Chris Wilson + +commit 3e784832a52686cd29d62bdeac7b1c539c640c5b +Author: Chris Wilson +Date: Sat Feb 1 16:55:32 2014 +0000 + + glamor: Enable Xv support + + In addition to the UXA texture paths (which in theory support VSync) and + direct overlay support, create a textured video paths that utilize the + glamor acceleration code. + + Requested-by: Fabio Pedretti + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74311 + Signed-off-by: Chris Wilson + +commit 3f2e199b6b4ce86ba3922f9f2dea5f6cba053453 +Author: Chris Wilson +Date: Fri Jan 31 17:59:30 2014 +0000 + + 2.99.908 snapshot + +commit 1f9a6156e9240a1efa8785ab5bca0a3b1757d08e +Author: Chris Wilson +Date: Fri Jan 31 20:02:44 2014 +0000 + + sna: remove short-circuit for move-to-CPU when damage covers region + + The short-circuit path missed translating the damage from drawable space + into the pixmap (for Composite setups) which may have resulted in + corruption. The path was also failing to consider the impact of reusing + an active CPU bo when it could be discarding the unwanted damage and + reallocating. + + Signed-off-by: Chris Wilson + +commit 539b749416b275d84e05e2a5b62d946903aa3d29 +Author: Chris Wilson +Date: Fri Jan 31 18:02:51 2014 +0000 + + sna: Use 24bpp rendering by default for gen2 again + + Too many users where unhappy that their software was broken. Too bad the + same software is also broken at high bit depths as well. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73877 + Signed-off-by: Chris Wilson + +commit bdb1a62ce21f3eb5e27e411b78f13ad2aea963a4 +Author: Chris Wilson +Date: Fri Jan 31 16:42:46 2014 +0000 + + sna: Balance memory accounting for buffer objects + + A couple bugs ended up with CPU bo gradually accumulating whilst the + overall number of bo vanished. + + Signed-off-by: Chris Wilson + +commit f934ee78a000815e14e36bd0caa279cb35d07bfe +Author: Chris Wilson +Date: Fri Jan 31 15:39:23 2014 +0000 + + sna: Reorder assignments vs DBG + + It helps reading the debug log if what we print is correct. + + Signed-off-by: Chris Wilson + +commit bdbb928ea38977bd2784f454f35db2ac2c13c34c +Author: Chris Wilson +Date: Fri Jan 31 15:03:43 2014 +0000 + + sna: Actually reuse pixmap headers for ordinary pixmaps + + commit 3dbf17f00e200e864818b0b8ca762183cff9085f [2.99.907] + Author: Chris Wilson + Date: Tue Dec 3 12:10:01 2013 +0000 + + sna: Mark up an ordinary pixmap for reuse + + started to put the frequently allocated pixmaps into the object cache - + but as those frequent allocations themselves did not use the cache, the + cache kept growing. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1272338 + Signed-off-by: Chris Wilson + +commit dfac4650e621055c5504c1bcf6df6449afa6d8d2 +Author: Chris Wilson +Date: Fri Jan 31 14:28:56 2014 +0000 + + sna: Tidy up pixmap header allocations + + Refactor some more of the common code, and add some debug tracking. + + Signed-off-by: Chris Wilson + +commit 098a1163e9730b428351fa54e8765261f5350d21 +Author: Chris Wilson +Date: Fri Jan 31 14:10:36 2014 +0000 + + sna: Show the memory debug info again + + This needs to be visible whenever we --enable-debug=memory. Make it so, + and trim it to a single line in the process. + + Signed-off-by: Chris Wilson + +commit 166e8e9e5d79f64e30230d9520b9f6cafa7dd0d0 +Author: Chris Wilson +Date: Thu Jan 30 12:19:04 2014 +0000 + + sna: Silence a compiler warning for mismatching const strings + + sna_display.c: In function 'preferred_mode': + sna_display.c:3393:7: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] + mode = xf86GetOptValString(output->options, OPTION_PREFERRED_MODE); + + Signed-off-by: Chris Wilson + +commit ca2d9e69d08f5438a34dbf55ab058f5c4c3b3650 +Author: Chris Wilson +Date: Thu Jan 30 12:18:05 2014 +0000 + + sna: Suppress warning for freeing a "constant" string + + We allocated and own the string, so we can free it! + + sna_display.c: In function 'sna_output_get_modes': + sna_display.c:2314:4: warning: passing argument 1 of 'free' discards 'const' qualifier from pointer target type [enabled by default] + free(current->name); + + Signed-off-by: Chris Wilson + +commit 5ef675159fd83ee393a86220eb4f8c514da8d0e7 +Author: Chris Wilson +Date: Thu Jan 30 12:17:02 2014 +0000 + + sna: Handle char *backlight_iface + + The backlight_iface is a freeable string, in places we were assigning a + constant string and later freeing it. + + Signed-off-by: Chris Wilson + +commit 76e430e92c19ea799547e4e6ae1f389ebc6eaac5 +Author: Chris Wilson +Date: Thu Jan 30 12:13:16 2014 +0000 + + sna: Constify GCFunc to quieten the compiler. + + We keep a pointer to the old funcs when wrapping, this now needs to be const. + + sna_accel.c: In function 'sna_gc_move_to_cpu': + sna_accel.c:4008:17: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] + sgc->old_funcs = gc->funcs; + + Signed-off-by: Chris Wilson + +commit 57445e57d4dfc080620ff0e4f9ec9a63b0feb355 +Author: Chris Wilson +Date: Wed Jan 29 16:48:21 2014 +0000 + + sna: Fix format specifier typo ('%D') in DBG + + Signed-off-by: Chris Wilson + +commit 139fc76260ebeb4f4cc04c56b9ebf7f70bed660d +Author: Chris Wilson +Date: Wed Jan 29 13:42:50 2014 +0000 + + sna: Always clear the domain even only a potential sync + + It helps to keep the domain-tracking bookkeeping consistent. + + Signed-off-by: Chris Wilson + +commit d70620d9789da1cf983dac318d9ca9149f11ff20 +Author: Chris Wilson +Date: Wed Jan 29 13:39:20 2014 +0000 + + sna: We can only retire a bo if is not referenced by the current batch + + Fixes regression from + commit 8b0ebebcab21647348f769c25ca0c1d81d169e75 + Author: Chris Wilson + Date: Tue Jan 28 16:30:47 2014 +0000 + + sna: Be a little more assertive in retiring after set-domain + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74176 + Reported-by: Jan Alexander Steffens + Signed-off-by: Chris Wilson + +commit 971a5e64f574f09ef43bcca9e0bd02cb0e42aa03 +Author: Chris Wilson +Date: Wed Jan 29 13:15:43 2014 +0000 + + sna: Add assertions for set/get binding + + Signed-off-by: Chris Wilson + +commit 7df3da10e744d7f168ea3f30b21c434f99beae17 +Author: Chris Wilson +Date: Wed Jan 29 13:06:08 2014 +0000 + + sna/gen4+: Assert that the cached binding location is valid + + We can at least check that it is in the right region (i.e. not past + where the current surface has been allocated from). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=74176 + Signed-off-by: Chris Wilson + +commit 001dd080e15157961188c96718669dd1b4d6b939 +Author: Chris Wilson +Date: Wed Jan 29 11:15:45 2014 +0000 + + sna: Do not use color corrected pixel values for comparing against gc + + Dashed zero-width lines devolve into two passes (first to draw the + foreground dashes, and then to draw the gaps). The code was using the + pixel value to decide which phase was being drawn -- however the color + on the gc is not always bit exact (e.g. alpha channel) with the pixel + value. As a result, we would oft miss drawing anything when rendering + into the scanout. + + Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1059152 + Signed-off-by: Chris Wilson + +commit 872468a059e164235527d1501940b2740d3da2ff +Author: Chris Wilson +Date: Wed Jan 29 05:40:00 2014 +0000 + + sna/gen6+: Encourage inplace uploads for Composite + + First try using the blt path for a potential inplace upload for a + simple composite operation copying from a ShmPixmap. + + Signed-off-by: Chris Wilson + +commit 4b73a0ea22b43807c0118f4d7e9dcac3f0626463 +Author: Chris Wilson +Date: Wed Jan 29 05:32:25 2014 +0000 + + sna: Skip undamaged TearFree redisplays + + If we have not had cause to flush the wait_for_shadow buffer during the + course of the rendering, then we never wrote to the backbuffer and its + contents are still identical to the current frontbuffer. So if the + wait_for_shadow is still flagged as required on the scanout, we know we + can safely discard the redisplay request. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70905 + Signed-off-by: Chris Wilson + +commit 9f3fc9ec49f0caf53344577896ef9b6468cd3d4f +Author: Chris Wilson +Date: Tue Jan 28 21:56:23 2014 +0000 + + Allow selection of glamor as the default acceleration method + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74162 + Signed-off-by: Chris Wilson + +commit 2425f03432de9bedeeda14ddbc5742cf7ce22874 +Author: Chris Wilson +Date: Tue Jan 28 19:17:14 2014 +0000 + + sna: Check for a hang after a spurious error return from set-domain-ioctl + + set-domain-ioctl should only ever fail for invalid user input, beyond + the normal signal handling. As such if we do find a spurious error + return from the kernel, check for a GPU hang. + + Signed-off-by: Chris Wilson + +commit 8b0ebebcab21647348f769c25ca0c1d81d169e75 +Author: Chris Wilson +Date: Tue Jan 28 16:30:47 2014 +0000 + + sna: Be a little more assertive in retiring after set-domain + + After a successful set-domain for writing with the CPU, we know that the + buffer is idle so remove it from our request tracking. (External clients + complicate matters in that they may keep the bo active even after our + set-domain.) On the contrary, because of read-read optimisations a bo + may still be active after a set-domain for reading by the CPU, in which + we need to remain conservative in retiring the bo. + + Signed-off-by: Chris Wilson + +commit b99c8cbefdd8fec686ad81fbffebb70d43880779 +Author: Chris Wilson +Date: Tue Jan 28 12:51:00 2014 +0000 + + sna: Cancel the backlight change if set-property(DPMS) fails + + If the kernel reports an error from setting the DPMS property, we need + to undo the local changes and propagate back the error to the caller. + Although the latter is prevented by the RandR API, we can at least + restore the backlight. + + Signed-off-by: Chris Wilson + +commit 47effa1854e331643302146db238e6b092de8a9a +Author: Chris Wilson +Date: Mon Jan 27 21:48:33 2014 +0000 + + sna: Rearrange damage allocation to handle malloc failure more gracefully + + If we fail to allocate new damage boxes, first try collescing the + existing boxes to free up memory. + + Signed-off-by: Chris Wilson + +commit ad7daf9aae487af13c0578de95652675d4d2ed7d +Author: Chris Wilson +Date: Mon Jan 27 21:20:40 2014 +0000 + + sna: Use signal-safe DBG + + Otherwise we end up confusing the core Xserver functions when called + from auxilliary threads. + + Signed-off-by: Chris Wilson + +commit 294180b3bf78f2c0ae2f1197e1c0819d99009356 +Author: Chris Wilson +Date: Fri Jan 24 14:21:44 2014 +0000 + + sna/gen3+: Allow for spill when aligning vertices + + We need to flush the batch if we run out of space aligning our vertex + buffer - but the test must anticipate the space required for the new + alignment. + + Reported-by: Arkadiusz Miskiewicz + Signed-off-by: Chris Wilson + +commit 4385724dc49dd090e0a5956e287f80b92ebd70e8 +Author: Chris Wilson +Date: Fri Jan 24 11:29:26 2014 +0000 + + sna/gen2+: Inspect composite flags to discard unneeded CPU damage + + We can now check whether the Composite operation will require existing + CPU damage and if not discard it. + + Signed-off-by: Chris Wilson + +commit c9e9c85fc7b21e231c2532fe1c75b92307e112ed +Author: Chris Wilson +Date: Thu Jan 23 19:04:27 2014 +0000 + + sna/gen2,3: Don't set BLT_DST_TILED + + This bit only exists for gen4+ so avoid setting it on gen2 and gen3, + whilst setting it doesn't seem to cause any harm, there is no reason to + risk it... + + Signed-off-by: Chris Wilson + +commit 6914b3af7f26c7b61e4ee6ea3a6ccda5011fa4da +Author: Chris Wilson +Date: Thu Jan 23 16:30:07 2014 +0000 + + sna: Protect against fake CRTCs during initial probe + + Reported-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73981 + Signed-off-by: Chris Wilson + +commit e916c922ce3913712cd8a9b76ab037840b7f07f1 +Author: Chris Wilson +Date: Thu Jan 23 17:30:29 2014 +0000 + + sna: Avoid erroneous discarding operations for partial composites + + Composite operations were presumed to cover their entire width x height + area. However, a few paths submit boxes that do not cover the clip + region and so the optimisation made during prepare to discard completely + overwritten data is incorrect (and leads to corruption - stale data is + seen which the client expected to have been overdrawn). So along these + more unusual paths, we must add a flag to prevent the overzealous + discard. Notably, xfce4 triggers this as it uses a lot of unantialiased + trapezoids in its theme drawing. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=69528 + Signed-off-by: Chris Wilson + +commit 59e769e1b1eede466482a950b242ce81c52b276b +Author: Chris Wilson +Date: Thu Jan 23 12:57:48 2014 +0000 + + glamor: Don't require the glamoregl module to be pre-loaded with xserver >= 1.15 + + Inspired by (ok, copied from): + + xf86-video-ati commit f2a0a5cf6c5a21e2a02280e110a4eb8e6609dace + Author: Michel Dänzer + Date: Wed Jan 22 11:04:42 2014 +0900 + + Don't require the glamoregl module to be pre-loaded with xserver >= 1.15 + + The issues with loading it on demand have been fixed in xserver 1.15. + + Inspired by Jérôme Glisse on IRC. + + Signed-off-by: Chris Wilson + +commit 32010ed86bb8f28d3b02e1e54a592d79b92b2b98 +Author: Chris Wilson +Date: Wed Jan 22 16:26:14 2014 +0000 + + sna: Assert that the fill box is within bounds + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73811 + Signed-off-by: Chris Wilson + +commit 29e11e2e6f80f6485ed69ea72e09e8d9b31fd8e8 +Author: Chris Wilson +Date: Tue Jan 21 22:40:11 2014 +0000 + + sna: Restore gc->serialNumber correctly after falling back + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73856 + Signed-off-by: Chris Wilson + +commit 2c441079cbd52902d356b652659e2be84726940e +Author: Chris Wilson +Date: Tue Jan 21 10:17:03 2014 +0000 + + sna: Initialise the TearFree shadow output from the current front buffer + + Otherwise we may end up in a sitation where we show stale contents for a + (sometimes signification) fraction of a second before it is refreshed + with the correct contents. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73842 + Signed-off-by: Chris Wilson + +commit ac22dd4292841e27bb6147cf1aa7867f36bb2118 +Author: Chris Wilson +Date: Fri Jan 17 14:33:26 2014 +0000 + + sna/gen4: Add an ALWAYS_FLUSH debugging option + + Still gen4 is cursed. This should restore the plateau we reached with + 2.99.907 by forcing a full GPU flush between every operation. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit 720d131963b5c4d8f9e63c8852dbc133544ad312 +Author: Chris Wilson +Date: Tue Jan 21 10:35:30 2014 +0000 + + sna: Drop bogus assert added in recent patches + + The intention was to detect if the gc->pCompositeClip still pointed to + the temporary region. However, the assert failed to accomplish that + goal. + + Signed-off-by: Chris Wilson + +commit 36b743aa8e246c7361436d93a41a1f844c168a7a +Author: Chris Wilson +Date: Tue Jan 21 10:00:07 2014 +0000 + + sna: Reduce zeal of new gc->pCompositeClip + + gc->pCompositeClip starts off NULL, just like sna_gc->priv. + + Reported-by: Arkadiusz Miskiewicz + Signed-off-by: Chris Wilson + +commit 6a757eaa0903139183d16c3437bf86d58e62145e +Author: Chris Wilson +Date: Tue Jan 21 09:25:45 2014 +0000 + + sna: Fix typo in assertion from previous commit + + Sigh. It helps to remember to do compile testing with the right + configuration. + + Signed-off-by: Chris Wilson + +commit b9ebb016833df5b70336c66993a871e850fd0f61 +Author: Chris Wilson +Date: Tue Jan 21 09:05:54 2014 +0000 + + sna: More assertions for tracking gc->pCompositeClip + + Tracking down who leaves it modified... + + Signed-off-by: Chris Wilson + +commit f7121bf733e9b02248fa0b7bb62a902622dd8f10 +Author: Mark Kettenis +Date: Mon Jan 20 22:33:16 2014 +0000 + + sna: build fix for OpenBSD + + Commit 50a45a1cdd4d8319ba9358974d241069689591c5 introduced the use of + "struct stat" but doesn't include . Presumably that leaks + in trough some other header on Linux, but on OpenBSD compilation fails + because the struct isn't known. + +commit 50f6701aa5ce8be96e216a942880a8db967c7a6a +Author: Chris Wilson +Date: Mon Jan 20 20:47:15 2014 +0000 + + sna: Include serial numbers in ValidateGC DBG + + Signed-off-by: Chris Wilson + +commit 4c7b183fd21b461f9f18662c3b9d9732b6bef13d +Author: Chris Wilson +Date: Mon Jan 20 14:35:55 2014 +0000 + + sna: Short-cut the fallback for XCopyArea with depth < 8 + + Signed-off-by: Chris Wilson + +commit 671658499bf432666a96b31ac96d2c66e2168c4c +Author: Chris Wilson +Date: Mon Jan 20 14:35:35 2014 +0000 + + sna: Add some more DBG output around the clipping in sna_do_copy() + + Signed-off-by: Chris Wilson + +commit 55a933aa29434f23674c851f02dce0ce983a0730 +Author: Chris Wilson +Date: Mon Jan 20 13:29:22 2014 +0000 + + intel-virtual-output: Tidy some DBG for copying new modes + + Signed-off-by: Chris Wilson + +commit 04ee452439d14e2f8941e989823cb81fb62858e7 +Author: Chris Wilson +Date: Mon Jan 20 12:19:25 2014 +0000 + + sna: Increase limit on number of possible outputs + + Signed-off-by: Chris Wilson + +commit 637e7c2186ccde65bed74dfd28f53a2a808e4101 +Author: Chris Wilson +Date: Mon Jan 20 12:33:19 2014 +0000 + + intel-virtual-output: Print error events for debugging + + Signed-off-by: Chris Wilson + +commit 92e9bf82b22ca59ac0009a6a4a641a1056c34bf4 +Author: Chris Wilson +Date: Mon Jan 20 12:25:34 2014 +0000 + + intel-virtual-output: Disable remote display if SetCrtcConfig fails + + Signed-off-by: Chris Wilson + +commit 3138d06893b3380473cfab60ee19e80cb3b61192 +Author: Chris Wilson +Date: Mon Jan 20 10:38:23 2014 +0000 + + intel-virtual-output: Clone modes onto remote display + + If the user adds a mode to the VIRTUAL display and then attempts to use + it, add that mode to the remote display. + + Reported-by: Christoph Bessei + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73816 + Signed-off-by: Chris Wilson + +commit de0797edac67e00b720dcc99d70b8e0f033a90b1 +Author: Chris Wilson +Date: Mon Jan 20 09:32:50 2014 +0000 + + sna: Yield the processor if the kernel reports EAGAIN + + An artifact of our kernel/userspace interaction is that under certain + circumstances the kernel will report EAGAIN in order for it to have CPU + time to run its own workqueues before it can process the userspace + request. We can be cooperative and yield ourselves rather than busy-spin + waiting for the scheduler to demote us. + + Signed-off-by: Chris Wilson + +commit 50a45a1cdd4d8319ba9358974d241069689591c5 +Author: Chris Wilson +Date: Sun Jan 19 15:59:42 2014 +0000 + + sna: Use device minor to narrow search for debugfs files + + Also vital in case we ever have two Intel GPUs! + + Signed-off-by: Chris Wilson + +commit d41bbfc97c46b01227f193d7e938390691a8b581 +Author: Chris Wilson +Date: Sun Jan 19 15:18:44 2014 +0000 + + sna: Always emit an error message when an execbuffer fails + + So that we are not left with a puzzled user with a mysteriously slow + machine. + + Signed-off-by: Chris Wilson + +commit d7f753ba89c928f141f1feb750733f53130c3bfb +Author: Chris Wilson +Date: Sun Jan 19 12:52:20 2014 +0000 + + sna: Discard pending wait_for_shadow updates before the TearFree flip + + Rather than just assert that we have used the pending update in + wait_for_shadow, discard it first. + + Reported-by: Joe Peterson + References: https://bugs.freedesktop.org/show_bug.cgi?id=70905 + Signed-off-by: Chris Wilson + +commit 498fcb001358af8f15bd129f8d1edf2530edf412 +Author: Chris Wilson +Date: Sat Jan 18 22:38:40 2014 +0000 + + sna: Refactor common routines for debugfs file dumping + + Signed-off-by: Chris Wilson + +commit b68c35a11da849a2680ba77bf565038fd8f30dd0 +Author: Chris Wilson +Date: Sat Jan 18 22:21:35 2014 +0000 + + sna: Fix typo in debugfs paths + + Signed-off-by: Chris Wilson + +commit 9342bc3dfd64b338c0802793f311574323067652 +Author: Chris Wilson +Date: Sat Jan 18 21:38:59 2014 +0000 + + sna: Dump fence registers upon starvation + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73696 + Signed-off-by: Chris Wilson + +commit 35ea7b2dd5904d5d8f7c355368c82bb12f1b83a0 +Author: Chris Wilson +Date: Fri Jan 17 12:55:33 2014 +0000 + + intel: Silence a compiler warning (-Wshadow) + + intel_device.c: In function 'intel_entity_get_devid': + intel_device.c:82:32: warning: declaration of 'index' shadows a global declaration [-Wshadow] + + Signed-off-by: Chris Wilson + +commit f23ab963c4f4ada2051588dfc85264aa2798dbf7 +Author: Rinat +Date: Fri Jan 17 10:47:44 2014 +0000 + + Provide DRI2DriverVDPAU for future compatibility + + Since 2010, DRI2 supports multiple driver names. That was added to ease + selection of appropriate driver by libvdpau. As for today, intel driver + support only DRI2DriverDRI (== 0), but not DRI2DriverVDPAU (== 1). + + Although there is no any hardware-specific VDPAU driver for intel video + adapters at the moment, it would be easier to use generic drivers like + libvdpau-va-gl by creating symlink named libvdpau_i965.so.1. That way + appropriate driver will be selected in run time automatically: + libvdpau_i965.so.1 on i965 equipped machines, and libvdpau_nvidia.so.1 + on nvidia equipped ones. + + [ickle: Whilst I think this is a workaround for a brainfart in libvdpau + that it defaults to libvdpau_nvidia.so rather than first to + libdvpau_${DRI2DriverDRI} and then to a hardcoded libvdpau_backend.so, + I have no better solution, and this does seem in accordance with the + spec.] + + Signed-off-by: Rinat + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73507 + +commit 5f3ee21a307a4ff4db189bd53e58a70ec01ee6bc +Author: Chris Wilson +Date: Fri Jan 17 08:40:34 2014 +0000 + + sna: Nullify pixmap->devPrivate.ptr after promoting CPU bo to GPU + + When we convert a CPU bo into a GPU bo, we need to remove any dangling + shadow pointers we use for devPrivate.ptr. Whilst the bo remains alive + these are incoherent, but if we ever replace the GPU bo (for example to + change tiling for DRI2) then the dangling pointer becomes invalid and + will explode on next use. + + Reported-by: Mike Aury + Reported-by: Marti Raudsepp + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73351 + Signed-off-by: Chris Wilson + +commit 34192006c65640327bc81e2765f5ef5db3c539e3 +Author: Chris Wilson +Date: Fri Jan 17 09:02:55 2014 +0000 + + sna: Intensify the move-to-cpu pointer paranoia + + Rather than just state that the final pixmap->devPrivate.ptr is + non-NULL, we can assert that it matches the shadow value. + + Signed-off-by: Chris Wilson + +commit cea442c0d0d7f1ef95d9d8048668eecbdcbc9a4e +Author: Chris Wilson +Date: Thu Jan 16 22:37:41 2014 +0000 + + sna: Cull the DBG spew to stderr + + Reduce the logging verbosity of DBG so that it only appears in the + logfile by default - makes debugging much more pleasant. + + Signed-off-by: Chris Wilson + +commit 6db99169a99393a8a669f89682bb8df13a7c5677 +Author: Chris Wilson +Date: Thu Jan 16 11:20:30 2014 +0000 + + sna: Regularly check that the devPrivate.ptr is valid + + Signed-off-by: Chris Wilson + +commit 242d7503ddd98c59feda4bcc25e70cac06d3325e +Author: Chris Wilson +Date: Thu Jan 16 11:08:05 2014 +0000 + + sna: Avoid allocating temporary storage for TearFree rotations + + Signed-off-by: Chris Wilson + +commit 587452a6ad7ac57e37820c72220c4944451315a8 +Author: Chris Wilson +Date: Thu Jan 16 10:27:50 2014 +0000 + + sna: Make the temporary upload pixmap as having a statically allocated pointer + + Signed-off-by: Chris Wilson + +commit 40beee995e71b1fa4cd146a986f53e03595a4378 +Author: Chris Wilson +Date: Wed Jan 15 10:07:32 2014 +0000 + + sna: Add some more paranoia around dangling pointers + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73351 + Signed-off-by: Chris Wilson + +commit 9a0a1329391cc7d3047fea4b3d968afc7c6099b4 +Author: Chris Wilson +Date: Fri Jan 10 21:08:28 2014 +0000 + + sna: Handle release of active stolen scanouts + + If the scanout is still active we want to defer our release until the + request is retired. + + Signed-off-by: Chris Wilson + +commit b351f4a0009ce0eddb5866bd49ac59860a44f522 +Author: Chris Wilson +Date: Fri Jan 10 12:01:29 2014 +0000 + + sna/dri: Handle TearFree vblanks whilst the pipe is off + + As an extra complication for handling TearFree is that if we attempt to + requeue a swap whilst the pipe is off, that fails. As we have recursed + from the pixmap migration path, we have to abort the blit but still send + the event back to the client so that they unblock. + + Reported-by: Harald Judt + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73469 + Signed-off-by: Chris Wilson + +commit b1694c8ea5c0f2ce1ded2ab25aecfde80da16346 +Author: Chris Wilson +Date: Thu Jan 9 15:53:42 2014 +0000 + + sna: Include the deferred hotplug uevent propagation in DBG + + Signed-off-by: Chris Wilson + +commit bfabdb7ebf5e491da1e74f8b362f9c2f0b6f1ac5 +Author: Chris Wilson +Date: Thu Jan 9 12:34:58 2014 +0000 + + sna: Add regular refcnt checks on pixmap bo + + References: https://bugs.freedesktop.org/show_bug.cgi?id=73406 + Signed-off-by: Chris Wilson + +commit a2fc9e5f86096dbc2461eaf7e5ad5cf071f8d472 +Author: Chris Wilson +Date: Wed Jan 8 11:08:47 2014 +0000 + + Revert "sna: Remove spurious SAMPLER writemask for gen4" + + This reverts commit 4966f8374a068ca2a533e30594bfd333551ffd37. + + Not so spurious after all! + + Reported-by: Michal Suchanek + Signed-off-by: Chris Wilson + +commit b858c28d04dfd353a99f9d15c39599adbf5cb25f +Author: Chris Wilson +Date: Tue Jan 7 14:42:41 2014 +0000 + + sna/gen4: Tidy URB_FENCE command + + Signed-off-by: Chris Wilson + +commit b7565a26401e283df94b68019e8093f8104428f4 +Author: Chris Wilson +Date: Tue Jan 7 14:05:09 2014 +0000 + + sna/gen4: Use PIPE_CONTROL for a smaller hammer + + Using MI_FLUSH to break up primitive is overkill when a top-of-pipe + PIPE_CONTROL will suffice. + + Signed-off-by: Chris Wilson + +commit 9d8473c5d9489db439aca73f470bda29a22ebab6 +Author: Chris Wilson +Date: Tue Jan 7 13:43:35 2014 +0000 + + sna/gen4: Check for available batch space before restoring state after CA pass + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73348 + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit 3b177a5e972a8eed63f99b0cd7b048a1229683f5 +Author: Chris Wilson +Date: Wed Nov 20 14:22:05 2013 +0000 + + sna/gen4: Reduce flushes between primitive continuations + + Signed-off-by: Chris Wilson + +commit 4966f8374a068ca2a533e30594bfd333551ffd37 +Author: Chris Wilson +Date: Wed Nov 20 14:20:54 2013 +0000 + + sna: Remove spurious SAMPLER writemask for gen4 + + Signed-off-by: Chris Wilson + +commit 82fa7ec352426c7e3d5210aac8ea1030232cc0f3 +Author: Chris Wilson +Date: Mon Jan 6 14:30:56 2014 +0000 + + uxa: Always treat DPMSModeSuspend/Standby similar to DPMSModeOff + + As we assume that Suspend, Standby alias to Off and disable the crtc + when switching to any mode other than On, we need to also perform the + backlight updates for Suspend,Standby prior to passing the DPMS value + onto the kernel. + + Suggested-by: Alexander Monakov + Signed-off-by: Chris Wilson + +commit 28a057105b6974803aee0d68c2a71f322095dfde +Author: Chris Wilson +Date: Mon Jan 6 14:37:09 2014 +0000 + + uxa: Disable updating properties upon reading their values + + Backport commit e76b08cad2770015346fd4cd757de3bb3b6ff37c + Author: Chris Wilson + Date: Tue Oct 15 12:46:09 2013 +0100 + + sna: Disable updating properties upon reading their values + + in order to prevent random screen blanking upon return from DPMS. + + Reported-by: Alexander Monakov + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73181 + Signed-off-by: Chris Wilson + +commit 0138b38dfcd933d080f86cfd33664eeb3f5558a0 +Author: Chris Wilson +Date: Mon Jan 6 14:30:56 2014 +0000 + + sna: Always treat DPMSModeSuspend/Standby similar to DPMSModeOff + + As we assume that Suspend, Standby alias to Off and disable the crtc + when switching to any mode other than On, we need to also perform the + backlight updates for Suspend,Standby prior to passing the DPMS value + onto the kernel. + + Suggested-by: Alexander Monakov + Signed-off-by: Chris Wilson + +commit 28810d5b367942c96acbc696f27105259422a0d1 +Author: Chris Wilson +Date: Mon Jan 6 14:26:38 2014 +0000 + + uxa/dri: Pixmap are offscreen and not attached to any display + + As the code current assumes that pixmaps are located at screen origin + (0,0), it assumes that they are all on the first CRTC. However, since + they are offscreen, this leads to such complications as attempting to + emit vsync swapbuffers, and even worse attempting to swap a GLXPixmap + onto the scanout following a DRI2SwapBuffers. + + Reported-by: Alexander Monakov + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73282 + Signed-off-by: Chris Wilson + +commit 4d8f78bc95f8dd36693f74365dbc3c442fbbf8a9 +Author: Chris Wilson +Date: Thu Jan 2 15:01:38 2014 +0000 + + sna/gen7+: Emit invalidate between operations if rendering to source/mask + + Fixes regression from + commit c79cb18407273dc7798618390bd0b7d69b0f80d6 [2.99.907] + Author: Chris Wilson + Date: Wed Nov 20 11:17:20 2013 +0000 + + sna/gen7: Try to reduce flushes between primitive continuations + + Reported-by: Simon Munton + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73208 + Signed-off-by: Chris Wilson + +commit c4b88d602640b3e2e46c61928ab194dc9f6b390d +Author: Chris Wilson +Date: Wed Dec 18 10:33:52 2013 +0000 + + 2.99.907 snapshot + +commit 9289e2c56b7f0cc78c5123691ad96611f0e04bed +Author: Chris Wilson +Date: Mon Dec 16 11:39:20 2013 +0000 + + sna/gen4: Sacrifice performance to workaround render corruption + + The long running saga of trying to find an acceptable workaround for the + gen4 rendering corruption (seems to be a read-write hazard failure inside + the gpu) is failing, the only w/a found so far is to send a single + rectangle through the GPU at a time. + + Signed-off-by: Chris Wilson + +commit 660fbdac8da1f43749007f126201681023a677e1 +Author: Chris Wilson +Date: Sun Dec 15 10:41:22 2013 +0000 + + sna: Remove stale assertion + + Now that we do not remove the move-to-gpu for a plain read from the + TearFree buffer, it is viable to use that buffer as source for cloning. + So we need to kill the stale assertion. + + Signed-off-by: Chris Wilson + +commit 989198f3ddc763000702bd1eaeb54002e18a8f04 +Author: Chris Wilson +Date: Sun Dec 15 09:45:24 2013 +0000 + + intel-virtual-output: Disable build if timerfd is not present + + Otherwise the build breaks on *BSD. + + Reported-by: Yuta SATOH + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72707 + Signed-off-by: Chris Wilson + +commit c8e339edd31859820907115c8d618b0fec3ef227 +Author: Chris Wilson +Date: Sun Dec 15 09:39:54 2013 +0000 + + sna: Avoid recursive out-of-order operations in the middle of TearFree + + During TearFree, if we have to wait for the shadow flip to complete, we + run the event handler for the device. This can then cause us to evaluate + pending completed vblank events, which may in turn then attempt to use + the shadow bo and recurse into the TearFree handler. Try to prevent this + and requeue the vblank event. + + Reported-by: Pascal de Bruijn + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72690 + Signed-off-by: Chris Wilson + +commit f350a1369b3bd39ba0db8639f036864fe5df2f98 +Author: Chris Wilson +Date: Thu Dec 12 16:49:02 2013 +0000 + + sna/gen4+: Drop new assertion that we only finish a vbo after use in this batch + + A full vbo might not be discarded and so upon first use in the following + batch we decided to finish the old vbo and allocate a new. This can + happen before we even emit any relocations and so the assert is bogus. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 7c62925ba7f18f55ee34b946bddba84a07b83985 +Author: Chris Wilson +Date: Wed Dec 11 21:30:06 2013 +0000 + + sna: Remove unused variable + + sna_display.c: In function 'sna_crtc_redisplay__fallback': + sna_display.c:4104:19: warning: unused variable 'sna_crtc' [-Wunused-variable] + struct sna_crtc *sna_crtc = to_sna_crtc(crtc); + + Signed-off-by: Chris Wilson + +commit 7e76f21a4d9d8f5424c257e6e7686d5bb0bb6cf7 +Author: Chris Wilson +Date: Mon Jul 22 18:56:03 2013 +0100 + + intel: Recognise gen8 + + Assign gen=8 to the Broadwell PCI IDs, no marketing names are known at + this point in time. + + Signed-off-by: Chris Wilson + +commit f7d1c2b8d1883280e7916bb4473ff6436b186950 +Author: Chris Wilson +Date: Tue Jul 23 08:17:58 2013 +0100 + + sna: Enable scanline waits for Broadwell + + Broadwell uses the same mechanism as Haswell for vsync. + + Signed-off-by: Chris Wilson + +commit e017542d10e875260e3eef1b0369f4ea106df0f5 +Author: Chris Wilson +Date: Thu Dec 6 22:11:32 2012 +0000 + + sna/gen8: Initial backend for Broadwell + + Should match the functionality of the earlier generations, but untuned. + + Signed-off-by: Chris Wilson + +commit 610af0c70e755062b36ba9756fbc4288518b7c35 +Author: Chris Wilson +Date: Wed Nov 13 11:50:52 2013 +0000 + + Update i915_pciids.h + + Pulling in changes from: + + kernel commit 4d4dead67a4ab1d5de393f15ed5e4e2aa63d3bcf + Author: Ben Widawsky + Date: Sun Nov 3 16:47:33 2013 -0800 + + drm/i915/bdw: Add device IDs + + Signed-off-by: Chris Wilson + +commit 628b68f3a07ee619642521e0992eee81b9edd76f +Author: Chris Wilson +Date: Tue Dec 10 10:25:56 2013 +0000 + + sna/gen2,3: Replace stale bo replacement with simple asserts + + The surface creation routines should ensure that the minimum pitch + alignments are met. However, when rendering to a CPU bo, the pitch is + not under our control so we need to be more careful. + + Signed-off-by: Chris Wilson + +commit 6c91ec29807e96682c2e752744b60c06bf3f02d9 +Author: Chris Wilson +Date: Tue Dec 10 12:37:44 2013 +0000 + + sna: Set minimum pitch alignment to 8 bytes + + This prevents render corruption on gen3 and should not adversely affect + BLT pitch requirements or other GPUs. + + Signed-off-by: Chris Wilson + +commit ade25f4f95994b565a8ed8eb3811ff7453a8b0e5 +Author: Chris Wilson +Date: Mon Dec 9 10:49:56 2013 +0000 + + sna: Only discard READ hint for TearFree copy iff it subsumes the pixmap + + Remembering that the target window may be smaller than its backing + pixmap. + + Reported-by: Andreas Klauer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72430 + Signed-off-by: Chris Wilson + +commit a66db75bf370549f438796433f3e3fb5f7f0b2a3 +Author: Chris Wilson +Date: Mon Dec 9 10:32:05 2013 +0000 + + sna: Fallback gracefully when redisplaying after a GPU hang + + Signed-off-by: Chris Wilson + +commit cf89fb8b731dd541bde16277c52264ba1e150424 +Author: Chris Wilson +Date: Sun Dec 8 16:35:27 2013 +0000 + + sna: Simplify kgem_bo_can_map() + + Remove the attempt to trick us into mapping large bo. + + Signed-off-by: Chris Wilson + +commit 46256fa5a0ca4230ae7c226781c78c525e2648c6 +Author: Chris Wilson +Date: Thu Dec 5 16:12:22 2013 +0000 + + sna: Pass MOVE_READ for partial TearFree move-to-gpu + + When fixing up a pending shadow pageflip for TearFree, we must tell it + that it needs to flush the damage for a partial move-to-gpu. Even though + the current area does not read from the destination, the move-to-gpu + callback is a global pass, and we need to assume the worst for the + region outside of the target. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72343 + Signed-off-by: Chris Wilson + +commit 693c1343ed29d8779ce3ad5c0e80fbe6d7d0689f +Author: Chris Wilson +Date: Thu Dec 5 11:09:39 2013 +0000 + + sna: OsRegisterSigWrapper was only introduced in 1.6.99.900 + + Signed-off-by: Chris Wilson + +commit ba9a173d81514152cd1dac4f1df765be11a478ea +Author: Chris Wilson +Date: Thu Dec 5 11:06:59 2013 +0000 + + configure: Correct closing ']' + + Too many closed, too few opened. + + Signed-off-by: Chris Wilson + +commit 845b03ac110c22cff8b2653e76f6d974a628b776 +Author: Chris Wilson +Date: Thu Dec 5 11:00:44 2013 +0000 + + sna: Compilation fixes for squeeze + + Older version of glibc and valgrind require a slight massage. + + Signed-off-by: Chris Wilson + +commit bd22abee8f33b20ff6bc7297b0a9ae8708d18727 +Author: Chris Wilson +Date: Thu Nov 7 22:27:50 2013 +0000 + + sna: Update Baytrail VSync logic + + My current best guess at the glaring hole in the spec that is + synchronisation to vertical refresh. + + Note that this leaves VSync disabled for BYT for now as it is + ineffective - but at least it now doesn't hang! + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69869 + Signed-off-by: Chris Wilson + +commit 6c37ab3ddc5910fdf4ed663a8dc620edc9fec931 +Author: Chris Wilson +Date: Wed Dec 4 11:55:54 2013 +0000 + + sna: Print detected GPU first + + This should make the GPU identification easier to find in future. + + Signed-off-by: Chris Wilson + +commit 255025d8d342610ddc75f510ea795bf8785f1578 +Author: Chris Wilson +Date: Wed Dec 4 11:06:08 2013 +0000 + + intel: Tidy up driver identification string + + Split the identification strings between the older integrated graphic + chipsets and the more recent integrated processor graphics. This helps + to emphasis the recent branding and should reduce confusion about which + processors are supported by the driver. + + Signed-off-by: Chris Wilson + +commit 23f8802857d64212dc8df39da2c1f6f362f9d053 +Author: Chris Wilson +Date: Tue Dec 3 15:06:10 2013 +0000 + + sna/dri: Always clear the clear hint after pageflipping + + commit 3fd116782bb1c05a140f4783e92a8ee6a57143cd + Author: Chris Wilson + Date: Mon Sep 23 21:03:07 2013 +0100 + + sna/dri: Clear the clear hint upon applying DRI damage + + missed the short-circuit path for an already all-damaged pixmap - which + is quite common for the clear pixmaps... + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72194 + Signed-off-by: Chris Wilson + +commit 0420adfb9d92b691aabef4e0ccba3782417b4bf0 +Author: Chris Wilson +Date: Tue Dec 3 12:10:23 2013 +0000 + + sna/gen2,3: Unmap the old GPU bo when replacing due to render target constaints + + Signed-off-by: Chris Wilson + +commit 3dbf17f00e200e864818b0b8ca762183cff9085f +Author: Chris Wilson +Date: Tue Dec 3 12:10:01 2013 +0000 + + sna: Mark up an ordinary pixmap for reuse + + Signed-off-by: Chris Wilson + +commit 5a353ed151d175a757af6f8d5216bf2370dd3917 +Author: Chris Wilson +Date: Tue Dec 3 11:14:53 2013 +0000 + + sna: More assertions around tracking mapped state + + Signed-off-by: Chris Wilson + +commit 4274110b78f8962b921f773e67c981b033c3f664 +Author: Chris Wilson +Date: Tue Dec 3 11:03:39 2013 +0000 + + sna: Clear the clear hint after performing a userptr upload + + Signed-off-by: Chris Wilson + +commit 33f3ddd73da5f553accf78ce7e03a76b12f71393 +Author: Chris Wilson +Date: Tue Dec 3 09:37:37 2013 +0000 + + sna: Include Pineview in fence over-allocation checks + + When creating the object, we need to take account that fenced regions + in the aperture are in power-of-two sizes and so can be much larger than + the actual object. This includes Pineview, which although is more + relaxed with regards to fence alignment of GPU operations, still imposes + the same restrictions on the fence registers. + + Signed-off-by: Chris Wilson + +commit 9a8478dae681212bd7a86640f90e6d47c9393b1a +Author: Chris Wilson +Date: Mon Dec 2 15:48:50 2013 +0000 + + sna: Fix stipple offset for drawing into child windows + + Signed-off-by: Chris Wilson + +commit 32b942d0ff4f1d389ac643bfe6b18029d266dc13 +Author: Chris Wilson +Date: Mon Dec 2 10:43:51 2013 +0000 + + tests: Exercise stippled fills + + Signed-off-by: Chris Wilson + +commit 463ab7f4faf46f6530423b6b10f2cd1bb6d0aa83 +Author: Chris Wilson +Date: Mon Dec 2 11:08:05 2013 +0000 + + sna: Fix tile origin for pattern blits + + References: https://bugs.freedesktop.org/show_bug.cgi?id=71260 + Signed-off-by: Chris Wilson + +commit 6889ba38ab2bb050dec3057dbc584619dbe6d2e2 +Author: Chris Wilson +Date: Mon Dec 2 14:20:51 2013 +0000 + + sna: Drop forced alignment to 64 on pre-gen4 devices + + Some linear GPU bo that we create must be naturally aligned, and the + extra alignment imposed for pure paranoia is counter productive. + + Signed-off-by: Chris Wilson + +commit 49af22ee5533b1afbf30f50fcfd7245f1c8d98bc +Author: Chris Wilson +Date: Mon Dec 2 10:43:51 2013 +0000 + + tests: Exercise tiled fills + + Signed-off-by: Chris Wilson + +commit 3dae8b97151f1d08942ec690dac5a5008901d7d0 +Author: Chris Wilson +Date: Fri Nov 29 14:46:54 2013 +0000 + + sna: Dump GTT info if we fail to execute a batch due to ENOSPC + + Signed-off-by: Chris Wilson + +commit 2497fc332eafe31a0156ac5f66ec98f77ce0f647 +Author: Chris Wilson +Date: Thu Nov 28 22:03:39 2013 +0000 + + sna: Fix typo inside DBG message + + Signed-off-by: Chris Wilson + +commit fd007d9d465b9b3ddbbaf769931ec921a6f5ecb8 +Author: Chris Wilson +Date: Thu Nov 28 21:13:33 2013 +0000 + + sna/video: Correct handling of cropped images along packed fast path + + In particular, it was offseting the read from the source image, but not + correcting the length to read - causing a read from beyond the end of + the source and a segfault. + + Reported-by: Jan Engelhardt + Signed-off-by: Chris Wilson + +commit b85051ae480499dd8a6a6d07d5ce0feca7b844b4 +Author: Chris Wilson +Date: Thu Nov 28 16:25:52 2013 +0000 + + sna: Fallback from partial to full move-to-cpu + + Signed-off-by: Chris Wilson + +commit faedf266d7b476954574db2cb1274e677cf42bf4 +Author: Chris Wilson +Date: Thu Nov 28 14:12:56 2013 +0000 + + sna: Tidy up an assertion on an uninitialised variable + + Signed-off-by: Chris Wilson + +commit 1e382c6ece84f3040b21980a303fe00be667c4e2 +Author: Chris Wilson +Date: Thu Nov 28 14:02:18 2013 +0000 + + sna: Harden GetImage for use with very large buffers + + That risk causing SIGBUS due to oom. + + Signed-off-by: Chris Wilson + +commit 569b06abeae9b3dcaa611facdd3ec30c67de765b +Author: Chris Wilson +Date: Thu Nov 28 13:14:27 2013 +0000 + + sna: Wrap glyph composition with sigtrap handling + + Signed-off-by: Chris Wilson + +commit 974abd0c3acca7d3b782251d562bf00fd34b395d +Author: Chris Wilson +Date: Thu Nov 28 13:03:54 2013 +0000 + + sna: Prefer using userptr for PutImage into large GPU bo + + Signed-off-by: Chris Wilson + +commit 64f1fbb465bdd092c4ea4aafe10382ebe7b84ecb +Author: Chris Wilson +Date: Thu Nov 28 13:03:29 2013 +0000 + + sna: Tidy a split conditional in an picture upload + + Signed-off-by: Chris Wilson + +commit 1200aae4815cdbc6a4f242c264b2736e6fe0fa12 +Author: Chris Wilson +Date: Thu Nov 28 13:03:06 2013 +0000 + + sna: Wrap image upload with sigtrap + + Signed-off-by: Chris Wilson + +commit 0fb7c366a58ec9b9cdc0b330e53716ab04b24c96 +Author: Chris Wilson +Date: Wed Nov 27 22:06:27 2013 +0000 + + sna: Add a few more refcnt asserts + + Signed-off-by: Chris Wilson + +commit d65b57cd332ca4435867afa31b6da85481635d52 +Author: Chris Wilson +Date: Wed Nov 27 12:59:25 2013 +0000 + + intel-virtual-output: Trim remote framebuffer to fit + + Signed-off-by: Chris Wilson + +commit dd7c556072978822c1110346354acfa3362b012e +Author: Chris Wilson +Date: Wed Nov 27 12:57:09 2013 +0000 + + intel-virtual-output: Workaround mutter always using the same timestamp + + Signed-off-by: Chris Wilson + +commit 1085e6c93288de2275791ce9c585142870dc0877 +Author: Chris Wilson +Date: Tue Nov 26 16:13:23 2013 +0000 + + sna: Update connector-type-to-string mapping + + Add in a couple of newcomers to the connector type and make it easier to + track updates in future. + + Signed-off-by: Chris Wilson + +commit 80d1dee70ba3bdf38e0dd68a39380f4f3d9f22b5 +Author: Kirill Müller +Date: Tue Nov 26 11:36:54 2013 +0100 + + intel-virtual-output: mute spurious warnings + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72027 + +commit 36ac68bedd3b30d7bdf0f40b438b45a7c4dec9e5 +Author: Chris Wilson +Date: Tue Nov 26 09:41:42 2013 +0000 + + intel-virtual-output: Clone remote EDID for virtual outputs + + References: https://bugs.freedesktop.org/show_bug.cgi?id=72020 + Signed-off-by: Chris Wilson + +commit 63a964d6d0cb0e4ffce70d8e1b672dd65fae6703 +Author: Chris Wilson +Date: Tue Nov 26 08:52:39 2013 +0000 + + intel-virtual-output: Correct clip region of rotated outputs in source framebuffer + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71846 + Signed-off-by: Chris Wilson + +commit 13f3b24babba61e4d8b10661accc032169f04645 +Author: Chris Wilson +Date: Mon Nov 25 18:56:49 2013 +0000 + + sna: Correct plurization of axis for modesetting log message + + Signed-off-by: Chris Wilson + +commit 5580df729f4d3b2498a6dae19dac938f06bf602d +Author: Chris Wilson +Date: Mon Nov 25 16:55:47 2013 +0000 + + intel-virtual-output: Include transforms when computing required fb size + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71846 + Signed-off-by: Chris Wilson + +commit ded23af3cdf68ab94446b8774d6bc4d52b21907a +Author: Chris Wilson +Date: Mon Nov 25 16:49:58 2013 +0000 + + sna: Include reflections when logging mode changes + + Signed-off-by: Chris Wilson + +commit 5fa1b0a2c5e5d3e7f25bca5b79925a956253a24f +Author: Chris Wilson +Date: Mon Nov 25 16:13:45 2013 +0000 + + intel-virtual-output: Tweak DBG messages for copying rotation + + Signed-off-by: Chris Wilson + +commit 98efd7f5d94586f8d7c5b2e9c5515f4b37149b08 +Author: Chris Wilson +Date: Mon Nov 25 15:33:13 2013 +0000 + + sna: Log mode switches on virtual outputs + + Signed-off-by: Chris Wilson + +commit 42f325a87c336211ebb3ebcafc9130eff10cee93 +Author: Chris Wilson +Date: Mon Nov 25 11:14:15 2013 +0000 + + sna: Keep @NOWARNFLAGS@ last + + As the last option overrides the earlier options, make sure these + particular overrides always take effect by adding them last. + + Signed-off-by: Chris Wilson + +commit 4c4458e8a30920d065ca5db5d3ca3cc49454b869 +Author: Chris Wilson +Date: Mon Nov 25 10:01:00 2013 +0000 + + sna/trapezoids: trapezoids_bounds() reports not-empty, so use it + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit af4995d74bd3ee3ed8f17c7c04c8d3acaaecebc6 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:57:19 2013 +0000 + + sna: Handle failure to disable old plane when switching CRTCs + + If we fail to disable the old plane, abort the PutImage and report the + error. + + Signed-off-by: Zdenek Kabelac + +commit 00dcb4f22942b2d40253a7b43105e73e260216cf +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:35 2013 +0100 + + uxa: fix order of inline Bool + + Signed-off-by: Zdenek Kabelac + +commit 175b8711f8c90e7977aec5564f5c29588fa14469 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:34 2013 +0100 + + uxa,legacy: use unsigned for comparition of unsigned + + Signed-off-by: Zdenek Kabelac + +commit 7b235c92bbc6c7306ffef8caac5f07448c78d956 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:32 2013 +0100 + + sna: Add missing va_end + + Put va_end() into error paths + + Signed-off-by: Zdenek Kabelac + +commit 318f100d7337955c099fecb86d206c406779fafe +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:31 2013 +0100 + + uxa: Avoid relying on an assert and cleanup iterator + + Signed-off-by: Zdenek Kabelac + +commit a110637ef2a37505ee68447cf66763af4cabfc00 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:30 2013 +0100 + + Fix indentation for incorrectly shifted statements + + Signed-off-by: Zdenek Kabelac + +commit b419691e277af0881baa7daac17af424dc1337b1 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:29 2013 +0100 + + uxa: rename some local variable to not shadow global ones + + Signed-off-by: Zdenek Kabelac + +commit 6f066b6714df850c5ea42dbde2296803c5b06da0 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:28 2013 +0100 + + uxa: Ensure mask_picture is defined + + Signed-off-by: Zdenek Kabelac + +commit ea18b7780e7d0d7fcd36b656a4fd974fb9d7137d +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:27 2013 +0100 + + Cast to use unsigned math + + Signed-off-by: Zdenek Kabelac + +commit 34057611c67b751c43d6bd70a7d5993708262cd2 +Author: Chris Wilson +Date: Mon Nov 25 09:36:32 2013 +0000 + + Correct type of uevent_handler + + xf86AddGeneralHandler returns an opaque pointer, not a function pointer. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit d2df10e28fa35d29b539dc52c61f710910b75831 +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:25 2013 +0100 + + Remove uneeded headers + + Signed-off-by: Zdenek Kabelac + +commit 41be7e9d490633a65aa1e0c9f76acfb67869288f +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:24 2013 +0100 + + config apostrophe + + Signed-off-by: Zdenek Kabelac + +commit 2275ef581ee1a1c45a45df40f952779f62fb53ed +Author: Zdenek Kabelac +Date: Mon Nov 25 09:09:20 2013 +0100 + + Makefile convert @var@ to $(var) + + Avoid using @var@ since this could not be easily overwritten through + 'make var=xxx' option which is normally available. + For Makefile.am users should avoid using @var@. + + Signed-off-by: Zdenek Kabelac + +commit 12e974c7bc8c85dbccd3d9ef91c1315e85bbeb6c +Author: Chris Wilson +Date: Fri Nov 22 17:37:57 2013 +0000 + + Revert "intel-virtual-output: Only track the most recent visibility status of the cursor" + + This reverts commit abf1a16914d993cc150005879375d4bb17fdccf3. + + We need to track visibility over all clones on a display, not just the + last. + + Regression from + commit abf1a16914d993cc150005879375d4bb17fdccf3 [2.99.906] + Author: Chris Wilson + Date: Fri Nov 8 17:09:35 2013 +0000 + + intel-virtual-output: Only track the most recent visibility status of the curso + + Reported-by: Kirill Müller + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71838 + Signed-off-by: Chris Wilson + +commit 0ee29c4ea3b05e9361635a2ef6e7b92c160d68cf +Author: Chris Wilson +Date: Fri Nov 22 13:34:35 2013 +0000 + + uxa,sna: Prevent bo exchange when pinned for non-DRI2 clients + + With the advent of DRI3 (and previously with Prime and Glamor) we have + external clients who rely on the pixmap<->bo mapping being invariant. + + Signed-off-by: Chris Wilson + +commit f0021ab2a66fb7c84758ad482f47f023b862360b +Author: Chris Wilson +Date: Fri Nov 22 12:07:06 2013 +0000 + + sna: Tidy up fallback from render composite to blt composite + + Signed-off-by: Chris Wilson + +commit 38ef572d68380db407039fe12d62426939030010 +Author: Chris Wilson +Date: Thu Nov 21 21:52:46 2013 +0000 + + sna: XY_SETUP_* expects the dst tiling to be set on gen4+ + + A few paths failed to set the tiling flag when setting up the BLT + engine, leaving the engine in a potentially inconsistent state. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71260 + Signed-off-by: Chris Wilson + +commit dee2db883954d9ce3560b81f84d5c805edfd3977 +Author: Chris Wilson +Date: Thu Nov 21 14:48:23 2013 +0000 + + sna: Fix typo in sna_blt_fill_begin() + + Reported-by: intelgraphics7@gmx-topmail.de + Signed-off-by: Chris Wilson + +commit 7d9edc9a717cfc6fbdbe468f7e32a68ac674a207 +Author: Chris Wilson +Date: Wed Nov 20 18:50:40 2013 +0000 + + sna: Set supported rotations on virtual outputs + + As the virtual outputs are created later, they do not get automatically + populated with RR properties and we must do that instantiation + ourselves. + + Reported-by: Kirill Müller + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71846 + Signed-off-by: Chris Wilson + +commit c79cb18407273dc7798618390bd0b7d69b0f80d6 +Author: Chris Wilson +Date: Wed Nov 20 11:17:20 2013 +0000 + + sna/gen7: Try to reduce flushes between primitive continuations + + Signed-off-by: Chris Wilson + +commit b14228fafb654fe7d8f8783475aa0c0ba87e4fea +Author: Chris Wilson +Date: Tue Nov 19 12:15:24 2013 +0000 + + intel-virtual-output: Check for failure to create a clone + + Signed-off-by: Chris Wilson + +commit 9e6979b67afdd8122a29135d752c6ea84e9af6dc +Author: Chris Wilson +Date: Tue Nov 19 12:13:26 2013 +0000 + + intel-virtual-output: Fix trivial and unlikely fd leak from bumblebee failure + + Signed-off-by: Chris Wilson + +commit 9ed5f83fe7ec71faf40147271aef1cf4a5a38329 +Author: Chris Wilson +Date: Tue Nov 19 12:09:35 2013 +0000 + + sna: Fix use before assignment + + mono.sna was being used the line before it was assigned. + + Signed-off-by: Chris Wilson + +commit a9d6f897e6d6dc388de24f7b49ba79bf1f6125c3 +Author: Chris Wilson +Date: Tue Nov 19 12:03:33 2013 +0000 + + sna: Free composite boxes in the unlikely all-invalid path + + Signed-off-by: Chris Wilson + +commit 0782d4e57e4ba33aee30925ad276ee4a1ec15feb +Author: Chris Wilson +Date: Tue Nov 19 12:01:33 2013 +0000 + + sna: Correct check for overwriting last BLT fill + + Typo crept in from the reloc rework. + + Signed-off-by: Chris Wilson + +commit 31f559820dbde1a028a76b9eeaeb1848aec3cc2b +Author: Chris Wilson +Date: Tue Nov 19 12:00:08 2013 +0000 + + sna/gen4+: Clear redirect bo before falling back to BLT paths + + Just in case we later try to take action on the already freed + redirection. + + Signed-off-by: Chris Wilson + +commit bb3ea102ca6b8aa843a10607fa140f5694cc4898 +Author: Chris Wilson +Date: Tue Nov 19 09:47:15 2013 +0000 + + test: Fix compilation of render-trapezoid-image + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71768 + Signed-off-by: Chris Wilson + +commit 12f4c48d39b939a3a26a1504910b5f16ee6c86b8 +Author: Chris Wilson +Date: Mon Nov 18 16:59:08 2013 +0000 + + sna/gen7: Rework random GPU flushing + + There seems to be no clear rationale for these flushes. They have been + empirically derived to pass test/render-copyarea and rendercheck, + without impacting upon a few simple benchmarks. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=68410 + Signed-off-by: Chris Wilson + +commit 04e4bae02c409853c95f43ba4b2b69e50940ec72 +Author: Chris Wilson +Date: Mon Nov 18 14:16:07 2013 +0000 + + sna: Tell valgrind about the returned mode list + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 4194100691347ccec4b1863f3f62987d9286707b +Author: Chris Wilson +Date: Mon Nov 18 12:33:05 2013 +0000 + + sna: Process Damage relative to dst->pDrawable not its pixmap->drawable + + References: https://bugs.freedesktop.org/show_bug.cgi?id=32734 + Signed-off-by: Chris Wilson + +commit e99e643ed1f2856109426f791a7615ee122d7c42 +Author: Chris Wilson +Date: Mon Nov 18 12:04:29 2013 +0000 + + tests: Avoid dependence on undefined C + + Right-shifting by a negative value is undefined. + + Signed-off-by: Chris Wilson + +commit b6924161108214b4e50c25f4168564ead4000430 +Author: Chris Wilson +Date: Mon Nov 18 11:58:43 2013 +0000 + + sna/damage: Tidy up a tail return + + Signed-off-by: Chris Wilson + +commit 52612185c60605542beb3745a2500ed65a8ffff0 +Author: Chris Wilson +Date: Fri Nov 15 21:20:30 2013 +0000 + + sna/damage: Guard against integer overflow before malloc + + Check that the multiplication to compute the allocation will not + overflow. + + Signed-off-by: Chris Wilson + +commit 95c3892dd3911ba44ae3170573de1153857b15a8 +Author: Chris Wilson +Date: Fri Nov 15 11:55:51 2013 +0000 + + sna: Include valgrind leakchecks for --enable-debug=memory + + Signed-off-by: Chris Wilson + +commit 6e9a8c5ae2883ca21d117ac672dd8a55b3429dc1 +Author: Chris Wilson +Date: Thu Nov 14 16:14:09 2013 +0000 + + sna: Add the missing braces around the conditional block + + Fixes regression from + commit f3225fcb38686f3b9701725bf3a11ecf1c100c3f + Author: Chris Wilson + Date: Tue Nov 5 08:38:22 2013 +0000 + + sna: Be move conservative with tiling sizes for older fenced gen + + Reported-by: Jay Little + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71605 + Signed-off-by: Chris Wilson + +commit 23f47c8b4b4825b9219e1f515015635a7c48ec35 +Author: Chris Wilson +Date: Thu Nov 14 10:17:49 2013 +0000 + + tests: Exercise render copies under a mask + + Signed-off-by: Chris Wilson + +commit aa5a5684ebada60a1b103624a9b49aa085a406c1 +Author: Chris Wilson +Date: Wed Nov 13 16:25:54 2013 +0000 + + sna/gen6+: Only substitute SRC for CLEAR if using the correct source + + If the source has not been verified to be clear, then using the SRC + operator will paint the wrong color. + + Signed-off-by: Chris Wilson + +commit 97e684ab3c887c1992733d0031f0256e9692d452 +Author: Chris Wilson +Date: Wed Nov 13 15:28:37 2013 +0000 + + sna/gen6+: Improve debug PREFER_RENDER to cover all decision points + + Signed-off-by: Chris Wilson + +commit 7358ba83a3d4ab37459b4e510704bd0be4438dcd +Author: Chris Wilson +Date: Wed Nov 13 15:27:05 2013 +0000 + + tests: Add render-composite-solid-mask + + Another reference test to exercise simple composite pathways clearly. + + Signed-off-by: Chris Wilson + +commit f08f9cb28efa1b82f196695c66c3ec3a2b63361c +Author: Chris Wilson +Date: Wed Nov 13 14:17:51 2013 +0000 + + sna: Eliminate a compiler warning for a shadowed variable + + sna_driver.c: In function 'sna_load_palette': + sna_driver.c:86:12: warning: declaration of 'index' shadows a global declaration [-Wshadow] + + Signed-off-by: Chris Wilson + +commit 501dbf45cd85b0008e599637ad3ca76c044d39d5 +Author: Chris Wilson +Date: Wed Nov 13 14:17:51 2013 +0000 + + sna: Eliminate a compiler warning for a shadowed variable + + We don't strictly need that local structure, so do without and keep the + compiler quiet. + + sna_driver.c: In function 'fb_supports_depth': + sna_driver.c:414:23: warning: declaration of 'close' shadows a global declaration [-Wshadow] + + Signed-off-by: Chris Wilson + +commit 7468a6b740af14d95e8f9bacd2e352ec98a9acf2 +Author: Chris Wilson +Date: Tue Nov 12 14:43:28 2013 +0000 + + 2.99.906 snapshot + +commit 220a8e8b1425d08af7ac104540be16611279e807 +Author: Chris Wilson +Date: Wed Nov 13 09:52:14 2013 +0000 + + Bump experimental ioctl command numbers + + In the meantime a new ioctl has snuck in. + + Signed-off-by: Chris Wilson + +commit 44c585a1d8c3b603a9c79bf7dfecf420575cfb61 +Author: Chris Wilson +Date: Tue Nov 12 18:59:54 2013 +0000 + + sna: Discard cached upload proxy when writing to the pixmap via the CPU + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 20e318c292a4e1336093dfbc77cb44d099c80050 +Author: Chris Wilson +Date: Sun Nov 10 10:28:01 2013 +0000 + + intel-virtual-output: Manually adjust screen size + + When we modify the outputs and end up with a different screen size, we + need to actually tell the display to resize with an explicit + XRRSetScreenSize. + + Reported-by: Jethro Beekman + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71441 + Signed-off-by: Chris Wilson + +commit 04d2cad65dbb07a2f03835a71fb7f5efc0235ea6 +Author: Chris Wilson +Date: Tue Nov 12 14:36:38 2013 +0000 + + Add identification strings for new Atoms + + All of the new Atom (Baytrail) products ship with "HD Graphics". + + Signed-off-by: Chris Wilson + +commit a6bd3011710a3fd4cfe21a3d41a6ec9c929681bf +Author: Chris Wilson +Date: Tue Nov 12 13:15:25 2013 +0000 + + sna: Factor available memory into available aperture estimation + + Signed-off-by: Chris Wilson + +commit 4493fb8d21fa013a074f7de66387e92ef23d191a +Author: Chris Wilson +Date: Tue Nov 12 00:05:11 2013 +0000 + + sna: Apply drawable offset to glyph bbox prior to checking for clipping + + This is a correction to + + commit ec0866e86d365ae3fd9790b1b263d49fc4981220 + Author: Chris Wilson + Date: Wed Oct 16 22:39:54 2013 +0100 + + sna/glyphs: Fix computation of extents for long strings + + in order for us to correctly detect when we need to clip. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71191 + Signed-off-by: Chris Wilson + +commit c489934ed732ed3d5a906939381c62a6bc1c38d5 +Author: Chris Wilson +Date: Mon Nov 11 14:56:22 2013 +0000 + + xvmc: Handle allocation failure around batch submission + + If we fail to allocate a new batch, just stall and reuse the old one + rather than crashing. + + Signed-off-by: Chris Wilson + +commit 3e93449b5492a4fc09401c23f8754655b63959b5 +Author: Chris Wilson +Date: Mon Nov 11 13:15:07 2013 +0000 + + intel-virtual-output: Fix format specifiers for Visual DBG + + Signed-off-by: Chris Wilson + +commit 31b5ff5889593337bf504dafa116a428bf1ffe9c +Author: Chris Wilson +Date: Mon Nov 11 12:56:30 2013 +0000 + + intel-virtual-output: Fix cut'n'paste DBG error + + Signed-off-by: Chris Wilson + +commit 29fcc15efabb5b1f7e1e0211da9714cf9e3cbd1c +Author: Chris Wilson +Date: Mon Nov 11 11:44:17 2013 +0000 + + sna: Assert that gc->funcs is never set to NULL + + References: https://bugs.freedesktop.org/show_bug.cgi?id=71415 + Signed-off-by: Chris Wilson + +commit aa140ef1e62c349936be5f153e4be7688e129e63 +Author: Chris Wilson +Date: Mon Nov 11 11:38:46 2013 +0000 + + sna: Add a couple more asserts to track a potential NULL gc->pCompositeClip + + References: https://bugs.freedesktop.org/show_bug.cgi?id=71415 + Signed-off-by: Chris Wilson + +commit 3e81a9cbd68344450a6e82130edfef21dd04ec43 +Author: Chris Wilson +Date: Mon Nov 11 10:47:24 2013 +0000 + + intel-virtual-output: Avoid the infinite loop around XPending + + XPending() reports if there are any events pending and does not perform + any dequeuing itself - ergo for a remote display while (XPending()) ; + becomes an infinite loop should there be an event pending. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=71345 + Signed-off-by: Chris Wilson + +commit 922a8bab89c1a5970db61670aaee21e827652bc2 +Author: Rémi Cardona +Date: Fri Nov 8 20:14:59 2013 +0100 + + configure: Use proper variables set by PKG_CHECK_MODULES + + $DRI_CFLAGS does not actually exist. The PKG_CHECK_MODULES call creates + a $DRI1_CFLAGS variable instead. This doesn't break often because + "recent" versions of xorg-server.pc indirectly depend on xf86driproto.pc + thus bringing in the required CFLAGS through $XORG_CFLAGS. + + Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=490342 + Signed-off-by: Rémi Cardona + +commit 7b0771180dc9bb7276a473db5663f41b5929199b +Author: Chris Wilson +Date: Sun Nov 10 10:34:06 2013 +0000 + + intel-virtual-output: Do not hide the cursor on the local/source display + + Whilst we want to take over and hide the cursor on the remote displays, + on the source we need to not interfere with the host. + + Reported-by: Jethro Beekman + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71439 + Signed-off-by: Chris Wilson + +commit b3b02a879bd6f29447e20fb5bb51c0a4a48a7928 +Author: Chris Wilson +Date: Sat Nov 9 11:15:39 2013 +0000 + + sna: Assert that we do setup the gc->pCompositeClip upon ValidateGC + + Signed-off-by: Chris Wilson + +commit 3ec663bf1c83ea1e470e94b9fb703346fc5bd39e +Merge: d9ecb91 abf1a16 +Author: Chris Wilson +Date: Sat Nov 9 11:06:12 2013 +0000 + + Merge branch 'master' of hsw:/usr/src/xf86-video-intel + +commit abf1a16914d993cc150005879375d4bb17fdccf3 +Author: Chris Wilson +Date: Fri Nov 8 17:09:35 2013 +0000 + + intel-virtual-output: Only track the most recent visibility status of the cursor + + Signed-off-by: Chris Wilson + +commit b46d0d327140a1b17066e473d6d61798ffb9871a +Author: Chris Wilson +Date: Fri Nov 8 14:04:32 2013 +0000 + + intel-virtual-output: Fix forced synchronisation of clones + + Signed-off-by: Chris Wilson + +commit fa40286e2f12a4757d1b9bcbe1f1d7c5170bd7da +Author: Chris Wilson +Date: Fri Nov 8 13:53:48 2013 +0000 + + intel-virtual-output: Tighten bad_visual() checks + + Signed-off-by: Chris Wilson + +commit 83c33a1f436c947ab3d9289a9c57d92f964e9541 +Author: Chris Wilson +Date: Fri Nov 8 13:00:11 2013 +0000 + + intel-virtual-output: Disable event tracking after a failure + + Signed-off-by: Chris Wilson + +commit 8b10c528044840d6c2a6244034fc6c2555476b8e +Author: Chris Wilson +Date: Fri Nov 8 12:58:06 2013 +0000 + + intel-virtual-output: Add DBG for the latest XSync + + Signed-off-by: Chris Wilson + +commit 969b064f74e0058a49afa17287184005d1e11402 +Author: Chris Wilson +Date: Fri Nov 8 12:54:01 2013 +0000 + + intel-virtual-output: Perform an explicit sync + + If we fail to track rendering using ShmCompletionEvents and begin to + drop frames, insert an explicit XSync. + + Signed-off-by: Chris Wilson + +commit e0075ccee2e7bbe46ecbf717817d468cc9248cc4 +Author: Chris Wilson +Date: Fri Nov 8 12:46:08 2013 +0000 + + intel-virtual-output: Check for pending events before skipping draw + + Make sure we check if the destination display has caught up before + skipping a frame. + + Signed-off-by: Chris Wilson + +commit ea4f99c333b181eb21012b5bee60251695e93c8b +Author: Chris Wilson +Date: Fri Nov 8 12:30:21 2013 +0000 + + intel-virtual-output: Add some DBG for bad_visual() + + Signed-off-by: Chris Wilson + +commit 84d667b94a97ad5fde68d730d57a19e1f4241ed5 +Author: Chris Wilson +Date: Fri Nov 8 08:53:55 2013 +0000 + + sna: Always schedule upload buffers for retirement after use + + Even if they are multiply referenced due to cached references. + + Signed-off-by: Chris Wilson + +commit d9ecb91ef123ee4e88020d0328a8c1fafad30e6c +Author: Chris Wilson +Date: Thu Nov 7 14:58:08 2013 +0000 + + sna: Skip an unmappable linear bo when searching through a cache for a GTT mapping + + Signed-off-by: Chris Wilson + +commit cb579a4444146a0736c7bad5edc1f382a32b6bf6 +Author: Chris Wilson +Date: Thu Nov 7 14:54:39 2013 +0000 + + sna: Only assert that the bo is small enough to be mmapped + + Not that is currently in a position to be mapped without eviction. + + Signed-off-by: Chris Wilson + +commit 68cef6cd281572fcfb76a341dc45b7c8e5baffe6 +Author: Chris Wilson +Date: Thu Nov 7 13:09:25 2013 +0000 + + sna/gen7: Request secure batches for Haswell vsync + + Since commit 8ff8eb2b38dc705f5c86f524c1cd74a811a7b04c + Author: Chris Wilson + Date: Mon Sep 9 16:23:04 2013 +0100 + + sna/hsw: Scanline waits require both DERRMR and forcewake + + we have been emitting LRI to enable vsync on the render ring. This + requires a privileged batch buffer, and whilst we were checking for + kernel support, we forgot to actually tell the kernel to submit the + batch with the right privileges. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71328 + Signed-off-by: Chris Wilson + +commit b796c33411218aeaf4daaeff41a1bc442b5f945f +Author: Chris Wilson +Date: Wed Nov 6 16:24:28 2013 +0000 + + sna: Always copy from the tile source + + The first step when tiling with an intermediatory is to copy from the + source bo to the temporary. The alu should only be applied when copying + from the temporary to the destination. + + Signed-off-by: Chris Wilson + +commit ace764501ec7c440eddc1d26670f6fbf29fa648d +Author: Chris Wilson +Date: Wed Nov 6 15:42:35 2013 +0000 + + sna: Remove erroneous assertion from sna_tiling_blt_composite + + We have to rely on the caller only calling us for a PictOpSrc equivalent + operation as they don't all set op->op. + + Signed-off-by: Chris Wilson + +commit 7a9c1e153a9208e8cd7680e478fde18e051beaa9 +Author: Chris Wilson +Date: Wed Nov 6 15:04:24 2013 +0000 + + sna: Add a DBG breadcrumb to kgem_bo_convert_to_gpu() + + Signed-off-by: Chris Wilson + +commit ae380a960df6b3a9714d78eb6cb42249764488ba +Author: Chris Wilson +Date: Wed Nov 6 14:51:42 2013 +0000 + + sna: Use tiling BLT fallback for BLT composite operations + + This avoid a circuituous route through the render pathways and multiple + levels of tiling fallbacks to accomplish the same copy. + + Signed-off-by: Chris Wilson + +commit 7578809ddcb244ad78ebf86359b7ee2a61e27ff6 +Author: Chris Wilson +Date: Wed Nov 6 13:42:27 2013 +0000 + + sna: Trim create flags if tiled sizes are too large + + Signed-off-by: Chris Wilson + +commit 073465817f54507ab6b7f801c5dfab2c06f678c0 +Author: Chris Wilson +Date: Wed Nov 6 13:41:39 2013 +0000 + + sna: Fences are power-of-two sizes + + Signed-off-by: Chris Wilson + +commit a6b008d69235cbbb572d7d4b33940d2cedd66556 +Author: Chris Wilson +Date: Wed Nov 6 11:38:53 2013 +0000 + + sna: Fixup unwind checks for future BLT commands + + Signed-off-by: Chris Wilson + +commit 22b6a331d0a102e8a8b9fcac1d75f8c9e16596b6 +Author: Chris Wilson +Date: Wed Nov 6 09:05:05 2013 +0000 + + sna: Clear the execlist if we completely unwind a batch after using 8x8 tiling + + Another location, but the right function this time! + + Signed-off-by: Chris Wilson + +commit c3d5b1d8fcb1b65c35827d38bf5b309e433d0907 +Author: Chris Wilson +Date: Wed Nov 6 09:40:56 2013 +0000 + + sna: Move initialisation of loop counter to common code + + It was only being defined in x86-64 and left unitialized for x86-32. + + Fixes regression from + commit 587c4866652e40e1e228b333028114766a6d3b08 + Author: Chris Wilson + Date: Mon Nov 4 15:10:40 2013 +0000 + + sna: Promote uint16_t to a full int to avoid overflow in computing w*h in memcpy_xor + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71286 + Signed-off-by: Chris Wilson + +commit 1a31335954b4d244d10e2594ae00e60762536a77 +Author: Chris Wilson +Date: Wed Nov 6 09:05:05 2013 +0000 + + sna: Clear the execlist if we completely unwind a batch after using 8x8 tiling + + Signed-off-by: Chris Wilson + +commit ef842d2ceee4d1ccf8a0f8a81530dc8be8e18b44 +Author: Chris Wilson +Date: Wed Nov 6 08:56:01 2013 +0000 + + sna: Be more pessimistic for tiling sizes on older gen + + On the older generation, we have severe alignment penalties for fenced + regions which dramatically reduce the amount of space we can effectively + use in a batch. To accommodate this, reduce the tiling step size. + + Signed-off-by: Chris Wilson + +commit f2f9019bae5f6f03b5e23da759d3871fc18dd9f4 +Author: Chris Wilson +Date: Tue Nov 5 22:41:06 2013 +0000 + + sna: Only operate inplace if no existing CPU damage for a read + + With a large object, we try harder to operate inplace (to avoid creating + a second large CPU bo). This introduced an issue where we tried to read + from the GPU bo when there was already existing damage in the CPU - + triggering an assertion. + + Signed-off-by: Chris Wilson + +commit 7f901495cdef0ae3b4a328bb98a6bc0ff03ea362 +Author: Chris Wilson +Date: Tue Nov 5 21:59:37 2013 +0000 + + sna: Trim the overestimate of required aperture space for fence alignment + + We can optimistically only require that we waste the largest fence + region in a batch, as all other fences will then be naturally aligned as + well. So long as the kernel succeeds in defragmenting the aperture... + + Signed-off-by: Chris Wilson + +commit 736b496b458d666416ea94f157c05ce78f98a600 +Author: Chris Wilson +Date: Tue Nov 5 21:33:18 2013 +0000 + + sna: Mark partial move_area_to_gpu with MOVE_READ on promotion to move_to_gpu + + When promoting a partial move_area_to_gpu to a full move_to_gpu, we have + to disable certain optimisations that we try to use if MOVE_READ==0. + + Reported-and-tested-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71198 + Signed-off-by: Chris Wilson + +commit 723f17ca4f9c120be5fe667bf2c3e35c7ee687be +Author: Chris Wilson +Date: Tue Nov 5 18:36:45 2013 +0000 + + sna: Submit execution on the bo before changing its caching status + + Signed-off-by: Chris Wilson + +commit 10b573c5084cabcc1bae70c8d35311fa5ec0a245 +Author: Chris Wilson +Date: Tue Nov 5 18:29:46 2013 +0000 + + sna: Clear snoop flag after converting from a CPU bo + + Signed-off-by: Chris Wilson + +commit dc61705a6e425952de4c81c2320382af07cf948a +Author: Chris Wilson +Date: Tue Nov 5 08:49:28 2013 +0000 + + sna: Use an inplace exchange for large untiled BO + + On older architectures, large BO have to be untiled and so we can reuse + an existing CPU bo by adjusting its caching mode. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70924 + Signed-off-by: Chris Wilson + +commit f3225fcb38686f3b9701725bf3a11ecf1c100c3f +Author: Chris Wilson +Date: Tue Nov 5 08:38:22 2013 +0000 + + sna: Be move conservative with tiling sizes for older fenced gen + + The older generations have stricter requirements for alignment of fenced + GPU surfaces, so accommodate this by reducing our estimate available + space for the temporary tile. + + Signed-off-by: Chris Wilson + +commit 93193aaf7d0fc4e3a3b9be1632bfd36331b47d2e +Author: Chris Wilson +Date: Mon Nov 4 22:14:05 2013 +0000 + + test + +commit a0d1de962a8107cfcaefd82eb8ffaf3e4da0e130 +Author: Chris Wilson +Date: Mon Nov 4 16:45:00 2013 +0000 + + sna: Check for loss of state after setting up a fill BLT op + + If we install a BLT fill operation early in the drawing sequence (i.e. + before calling a mi routine), we may lose our state to delayed + initialisation of sources and so need to subsequently recheck. + + Signed-off-by: Chris Wilson + +commit fcd081ca77c917c7000f8ab4668e5c863381a4f3 +Author: Chris Wilson +Date: Mon Nov 4 15:17:51 2013 +0000 + + sna: s/active/busy/ to silence compiler warning + + kgem.c: In function 'kgem_check_bo': + kgem.c:4768:7: warning: declaration of 'active' shadows a global declaration [-Wshadow] + kgem.c:692:21: warning: shadowed declaration is here [-Wshadow] + kgem.c: In function 'kgem_check_many_bo_fenced': + kgem.c:4907:7: warning: declaration of 'active' shadows a global declaration [-Wshadow] + kgem.c:692:21: warning: shadowed declaration is here [-Wshadow] + + Signed-off-by: Chris Wilson + +commit 587c4866652e40e1e228b333028114766a6d3b08 +Author: Chris Wilson +Date: Mon Nov 4 15:10:40 2013 +0000 + + sna: Promote uint16_t to a full int to avoid overflow in computing w*h in memcpy_xor + + Reported-by: Conley Moorhous + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70527 + Signed-off-by: Chris Wilson + +commit 8f6e227ba8127a2ca034271f2a660c24abbe056f +Author: Chris Wilson +Date: Mon Nov 4 12:57:01 2013 +0000 + + sna: Apply the BLT source offset for individual copies + + Following a complex path through multiple layers of indirections and + tiling fallbacks, resulted in hitting a path where the source offset was + subsequently ignored. This leads to the operation reading from invalid + memory (or hitting the assert warning about the same). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70924 + Signed-off-by: Chris Wilson + +commit 82b646a42f5a6271c8518ad454f1603714276caf +Author: Chris Wilson +Date: Mon Nov 4 11:48:04 2013 +0000 + + sna: Only use the simple stipple upload path if wholly contained + + If the stipple box is outside of the stipple pixmap, we need to + carefully upload the stipple using the modulus operation. + + Buzilla: https://bugs.launchpad.net/bugs/1247785 + Signed-off-by: Chris Wilson + +commit e678cead11b53699694f5b5cf52ff3ea0e08f637 +Author: Chris Wilson +Date: Mon Nov 4 11:47:29 2013 +0000 + + sna: Update DBG formats for larger BO offset integers + + Signed-off-by: Chris Wilson + +commit 94f9beb8fbb31c2b6158e492e02ff05c9ebc674f +Author: Chris Wilson +Date: Mon Nov 4 11:30:39 2013 +0000 + + sna: Remove the replace indirection prior to performing write_boxes + + As write_boxes itself decides whether or not to stage the upload into + the destination bo, we can destroy the temporary allocation along the + write_boxes fallback path (i.e. after failing to map the destination + bo). + + Signed-off-by: Chris Wilson + +commit ad3959324c02de2e73e7d1142d42248f7dbb4518 +Author: Chris Wilson +Date: Mon Nov 4 11:12:30 2013 +0000 + + sna: Only destroy the old GPU after successfully replacing it + + Along the sna_replace__xor path we destroyed the priv->gpu_bo twice upon + successfully replacing it. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70527 + Signed-off-by: Chris Wilson + +commit 8d067e961920e19fda7e9990440ac2be1a2e1760 +Author: Chris Wilson +Date: Mon Nov 4 09:34:25 2013 +0000 + + sna: Rename the two variants of pwrite so very relative dangers are obvious + + Since we extend the write in the cache-aligned routine, it runs the risk + of reading from beyond the end of the allocation. As such, callers + should be carefully vetted to make sure that their allocations are + already cache-aligned (typically page-aligned). To make it obvious that + this complexity exists, rename the routine. + + Signed-off-by: Chris Wilson + +commit 7050c8da56676b60a602dce9abbdb61a7c4fa61e +Author: Chris Wilson +Date: Mon Nov 4 09:31:05 2013 +0000 + + sna: Use the unoptimized pwrite for general buffers + + When we call kgem_bo_write() we have less control over the allocation of + the buffer, and do not ensure it meets the alignment criteria required + for the cacheline optimisation. So use the simple pwrite routine to + avoid reading beyond the end of the allocation. + + Reported-and-tested-by: Mark Kettenis + Signed-off-by: Chris Wilson + +commit 10023bf8f5a95b4e9f42c05370bc2c103d6a3d3d +Author: Chris Wilson +Date: Sun Nov 3 22:07:22 2013 +0000 + + sna: Use fast-path target placement if we are also IGNORE_CPU + + If we are ignoring CPU damage, we also need only to check GPU damage + when considering placement of the target bo. + + Signed-off-by: Chris Wilson + +commit 08d8a47e7c8b9bcb5bb317be4623161e58e0e0cc +Author: Chris Wilson +Date: Sun Nov 3 19:51:56 2013 +0000 + + sna: Wrap staging buffer access with sigtrap handler + + Signed-off-by: Chris Wilson + +commit 4a7217b05c232484a80abc7bd67494996dd32057 +Author: Chris Wilson +Date: Sat Nov 2 21:45:00 2013 +0000 + + sna: Discard bo->exec when unwinding a glyph no-op + + Signed-off-by: Chris Wilson + +commit add663919eb6aca1f5bbb39549d56f481ea0f273 +Author: Chris Wilson +Date: Sat Nov 2 21:13:45 2013 +0000 + + sna: Eliminate the redundancy between is_mappable/can_map + + Signed-off-by: Chris Wilson + +commit d41f847c75c3bce85fda6e7508995b45679944e8 +Author: Chris Wilson +Date: Sat Nov 2 21:01:26 2013 +0000 + + sna: Jump to the right escape target when bypassing a self-copy + + Another fix for + + commit e3f15cbf39696edae9f716bdcfbb7032ec7d7e3f [2.99.905] + Author: Chris Wilson + Date: Tue Oct 22 15:19:15 2013 +0100 + + sna: Move gc back to GPU after failure to move it to CPU + + Signed-off-by: Chris Wilson + +commit 7c143ba65cebfad08a32ee28c0dfb4f6635bf94c +Author: Chris Wilson +Date: Sat Nov 2 15:12:51 2013 +0000 + + sna: Add some more asserts around inactive VMA lists + + Signed-off-by: Chris Wilson + +commit 1c34ea0894e42bf344b0edad62cf2e142840af88 +Author: Chris Wilson +Date: Sat Nov 2 14:43:49 2013 +0000 + + sna: Tweak estimate of maximum usable aperture for strict fencing + + Old generations have very strict alignment requirements even for + unfenced tiled accesses which restricts the amount of aperture space + available for use, and in the process estimate for the effect of + framebuffer fragmentation on the mappable aperture. + + Signed-off-by: Chris Wilson + +commit d507b6b9825cc18f41911727ef2ba9b9593cfe21 +Author: Chris Wilson +Date: Fri Nov 30 16:28:02 2012 +0000 + + Prepare for changes in the BLT unit on future generations + + Adapt the legacy BLT commands in preparation for future changes. + + Signed-off-by: Chris Wilson + +commit 9681b1422e4531a19e0117e1b1a97668f6b6a571 +Author: Chris Wilson +Date: Sat Nov 2 13:11:31 2013 +0000 + + sna: Fallback when wedged and trying to use the BLT copy routines + + Signed-off-by: Chris Wilson + +commit 6cb84c8d55f2f7cbb087a479c1dbc8bc58e97183 +Author: Chris Wilson +Date: Fri Nov 1 15:57:56 2013 +0000 + + sna: Guard the replace-with-xor fallback path + + Before attempting to map the destination for uploading into after a + failure to use the BLT, we need to recheck that it is indeed mappable. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70924 + Signed-off-by: Chris Wilson + +commit 5da329735ca79517a326aee002685bf33e8db861 +Author: Chris Wilson +Date: Fri Nov 1 14:30:14 2013 +0000 + + sna: Process all clip boxes when rastering segments + + The macro still had buried returns which were no longer valid after the + translation to handle clipping. They needed to be breaks from the inner + most loops to the outer clip box instead. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70802 + Signed-off-by: Chris Wilson + +commit 0d93b0ef343a635512c3835c797c469c17a7b584 +Author: Chris Wilson +Date: Fri Nov 1 12:49:36 2013 +0000 + + sna/gen7: Undo overzealous flushing + + commit d580a30aaf97687f9669ea72fbc3310c2fea26f1 + Author: Chris Wilson + Date: Thu Oct 31 15:58:47 2013 +0000 + + sna/gen7: Flush render cache when changing CC state + + ultimately doesn't prevent the issue and in the process adversely + affects perforamnce. + + Signed-off-by: Chris Wilson + +commit 6b1a6f32179f7bff8503c6b8b38351a7cf1d08b7 +Author: Chris Wilson +Date: Fri Nov 1 10:48:06 2013 +0000 + + sna: Scale uses of aperture_mappable by PAGE_SIZE + + After converting aperture_mappable to count in pages, there were a few + residual users expecting a byte count. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71117 + Signed-off-by: Chris Wilson + +commit d580a30aaf97687f9669ea72fbc3310c2fea26f1 +Author: Chris Wilson +Date: Thu Oct 31 15:58:47 2013 +0000 + + sna/gen7: Flush render cache when changing CC state + + References: https://bugs.freedesktop.org/show_bug.cgi?id=68410 + Signed-off-by: Chris Wilson + +commit 82e6d41c2f4f343bd1854d3d8ee4b624b5d68971 +Author: Chris Wilson +Date: Thu Oct 31 13:35:59 2013 +0000 + + sna/gen6: Tweak flush around CC state changes + + In order to fix some font corruption, it appears that we need an extra + flush in the Sandybridge pipeline when we change the CC stage and the + render cache is dirty. We previously triggered a full pipeline stall + for this case. + + Signed-off-by: Chris Wilson + +commit 5cdc2bbc9c66d4c8c6fdb1b552c32177d070bf7b +Author: Chris Wilson +Date: Thu Oct 31 10:32:46 2013 +0000 + + sna: Tweak deletion of used buffers + + Make sure we never unwind a used buffer. + + Signed-off-by: Chris Wilson + +commit ed16e34c00d5eb5ca4ec643f66fedbf1a5112e90 +Author: Chris Wilson +Date: Wed Oct 30 18:48:10 2013 +0000 + + sna: Allow limited recursion within sigtrapped routines + + Signed-off-by: Chris Wilson + +commit 426efd5f4bb311eeec86de40815b6bc2c6914e94 +Author: Chris Wilson +Date: Wed Oct 30 18:42:06 2013 +0000 + + Revert "sna: Detect and handle mi recursion" + + This reverts commit c6b0e3fe0c299488932ba0392847f1faf298d079. + +commit ed282456240cc0a7ae9a235ea8aea14a8b8a54ef +Author: Chris Wilson +Date: Wed Oct 30 13:26:23 2013 +0000 + + sna: Assert that the batch is in the correct mode prior to inserting BLT commands + + Signed-off-by: Chris Wilson + +commit c6b0e3fe0c299488932ba0392847f1faf298d079 +Author: Chris Wilson +Date: Wed Oct 30 11:52:05 2013 +0000 + + sna: Detect and handle mi recursion + + Some of the mi routines recuse back into the generic accel routines and + so confuse our trapping of SIGBUS. Add extra assertions to pinpoint the + recursion and unwrap sufficiently to avoid that recursion. + + Signed-off-by: Chris Wilson + +commit 4d13d52258702f2581ca4f695b69e4dc8f510581 +Author: Chris Wilson +Date: Wed Oct 30 10:02:28 2013 +0000 + + sna: Queue retirement when placing a BO on the deferred flushing list + + Signed-off-by: Chris Wilson + +commit 59531ba31aa479497cb76b67ea972d1cfa6aec79 +Author: Chris Wilson +Date: Wed Oct 30 09:55:57 2013 +0000 + + sna: Check for wedged after submitting + + If we submit prior to an operation, check that we didn't just wedge the + GPU. + + Signed-off-by: Chris Wilson + +commit 87655e7df4847542db8da6c8b61006c95b936185 +Author: Chris Wilson +Date: Tue Oct 29 21:19:02 2013 +0000 + + sna: Wrap access of upload buffers with sigtrap + + For an extra layer of paranoia, catch any sigbus when trying to upload + a bitmap, and convert it to a no-op. + + Signed-off-by: Chris Wilson + +commit 0e692800055827cf526c7539515c71aecb58bf30 +Author: Chris Wilson +Date: Tue Oct 29 20:16:06 2013 +0000 + + sna/gen7: Refactor BYT vsync using IVB routines + + The BYT vsync is closer to the IVB vsync, and using gen6 is just + erroneous. Apparently. At least that is what is in bspec today. + + Signed-off-by: Chris Wilson + +commit 9352769eee0889dd1c1656829c140384a9e94bcf +Author: Chris Wilson +Date: Tue Oct 29 18:27:41 2013 +0000 + + sna: Fix assertion checks for fake flushing requests + + Signed-off-by: Chris Wilson + +commit eddd80c44dbb21769cbd100b8cfb0f38d1606e86 +Author: Chris Wilson +Date: Tue Oct 29 18:00:49 2013 +0000 + + sna: Remove an overzealous assert + + Testing with a slow gen2 triggers this harmless assertion, so drop it. + + Signed-off-by: Chris Wilson + +commit 9f36e83d76eb6ef26539fc37ce9ebd08428c48a3 +Author: Chris Wilson +Date: Tue Oct 29 16:59:57 2013 +0000 + + sna: Handle deferred retiring of active-buffers + + Yikes, the new assertions found cases where we would retain an active + buffer even though it was still owned by the next batch. Fortunately, + this should only be a bookkeeping issue rather than lead to corruption. + + Signed-off-by: Chris Wilson + +commit d26036d40e77e8f40c8d08659f95a8a5dfac07ed +Author: Chris Wilson +Date: Tue Oct 29 16:20:14 2013 +0000 + + sna: Always run the retire_buffers during ring_idle + + As we know that we had a request to retire, we know that we may make + progress retiring active buffers. + + Signed-off-by: Chris Wilson + +commit 72544ad5d11c2563d544ef1f7b25de2b3ab21295 +Author: Chris Wilson +Date: Tue Oct 29 14:53:02 2013 +0000 + + sna: Perform an explicit retire for old active upload buffers + + Signed-off-by: Chris Wilson + +commit d86b36dc41f2e6744a4dea9286634cdf7989fa71 +Author: Chris Wilson +Date: Tue Oct 29 15:12:17 2013 +0000 + + sna: Check for retired upload buffers after checking for an idle ring + + Signed-off-by: Chris Wilson + +commit 0e6aca90c7b0b9edd5873034bcf0f3d8b2a9f065 +Author: Chris Wilson +Date: Tue Oct 29 13:50:51 2013 +0000 + + sna: asserts bitmap uploads are correct + + Place guards around the pointer accesses to verify that they are within + the bitmap. + + Signed-off-by: Chris Wilson + +commit 56e3761dec7ea3fc35bda90fbc8b477de70fd144 +Author: Chris Wilson +Date: Tue Oct 29 12:46:09 2013 +0000 + + sna: Don't attempt to move the GC back to the GPU before it is moved away + + Fixes regression from + + commit e3f15cbf39696edae9f716bdcfbb7032ec7d7e3f [2.99.905] + Author: Chris Wilson + Date: Tue Oct 22 15:19:15 2013 +0100 + + sna: Move gc back to GPU after failure to move it to CPU + + Signed-off-by: Chris Wilson + +commit 4f41bf3de059c4e0a03fb161fb2e78d94be69e3f +Author: Chris Wilson +Date: Tue Oct 29 09:56:10 2013 +0000 + + sna: Try harder to complete writes + + Expunge our caches if we fail to write into a bo (presuming that + allocation failure is the likely fixable cause). + + Signed-off-by: Chris Wilson + +commit 76b14a90c16921426154be1d18307e3b12309eea +Author: Chris Wilson +Date: Mon Oct 28 20:48:17 2013 +0000 + + sna: Quieten a couple of valgrind warnings about unknown ioctls + + Signed-off-by: Chris Wilson + +commit 54aaf14dbf33b0e81932507b8753a63d1c6c8e77 +Author: Chris Wilson +Date: Mon Oct 28 13:06:16 2013 +0000 + + sna: Tidy RegionNil checks + + After computing the clip intersection, we immediately check for the + empty result, so refactor the check into the common routine. + + Signed-off-by: Chris Wilson + +commit 003f26a571cd0a0eda2499b4ae350c34bdb39b72 +Author: Chris Wilson +Date: Mon Oct 28 11:29:13 2013 +0000 + + sna: And be pessimistic when checking aperture limits + + Signed-off-by: Chris Wilson + +commit 671e4b44b2b2809e032a3d2a9b45ecf3af547100 +Author: Chris Wilson +Date: Mon Oct 28 11:28:01 2013 +0000 + + sna: Account for extra guard pages around snooped BO in aperture checks + + Signed-off-by: Chris Wilson + +commit f7d1da8ca5e1695b0459f87e85c587b26193e633 +Author: Chris Wilson +Date: Mon Oct 28 11:16:29 2013 +0000 + + sna: Defer opportunistic flush if all bo are current on the GPU + + Signed-off-by: Chris Wilson + +commit d69a4f118a729edfb82498501ddb99caf2f3fb93 +Author: Chris Wilson +Date: Mon Oct 28 10:33:57 2013 +0000 + + sna: Leave extra room in the mappable aperture for fence alignment + + Signed-off-by: Chris Wilson + +commit 40d4199f151a39ecebf127cf468b4470d2906f4e +Author: Chris Wilson +Date: Mon Oct 28 10:45:52 2013 +0000 + + sna: Use page-count for mappable aperture size + + For consistency with the other aperture metrics and correctness when + passing around required number of pages. + + Signed-off-by: Chris Wilson + +commit 9266e35b42e17293be59cff4c5097f7755112349 +Author: Chris Wilson +Date: Sun Oct 27 16:45:53 2013 +0000 + + sna: Fallthrough to opportunistic flushing after aperture checks + + Signed-off-by: Chris Wilson + +commit 4e0a01a7a3cf0f473c7ffae9129069086bf2fbe2 +Author: Chris Wilson +Date: Sun Oct 27 15:33:13 2013 +0000 + + sna: Handle transient TearFree flip failures + + If we get a pageflip fail when trying to do a TearFree update, just + fallback to a copy (before turning off the display for complete + failure). The rare tearing copy should mar the user experience far less. + + Signed-off-by: Chris Wilson + +commit b480e1ec503534310d3875aef81ed191aeb93313 +Author: Chris Wilson +Date: Fri Oct 25 15:09:19 2013 +0100 + + sna: Trim usuable fenced aperture by unfenced usage + + This will overcount buffers that both fenced and unfenced (likely most + fenced buffers!) but is required to prevent ENOSPC due to alignment + issues. + + Signed-off-by: Chris Wilson + +commit 64b9f57451501830f8031d1b6ac7289642da032d +Author: Chris Wilson +Date: Fri Oct 25 14:27:21 2013 +0100 + + sna: Don't assert indirect GPU state + + kgem_check_bo_fenced queries whether the GPU is idle, and so its result + is timing dependent and not suitable for assertion. + + Signed-off-by: Chris Wilson + +commit f0da01aa907d488ae32dfda206ea8a66564bc430 +Author: Chris Wilson +Date: Fri Oct 25 14:22:05 2013 +0100 + + sna: Remove stale mappings when replacing GPU bo + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70527 + Signed-off-by: Chris Wilson + +commit 4e4d643794975b2ac90d04f1a11c0b8114699559 +Author: Chris Wilson +Date: Fri Oct 25 13:20:10 2013 +0100 + + sna: Fix overallocation of fences for BLT commands (gen2/3) + + Fixes a regression introduced in + commit 4d2840919fd00e4ae0bf1957f66009f55a01eb7b + Author: Chris Wilson + Date: Thu Sep 26 15:30:58 2013 +0100 + + sna: In desperation, query the actual available aperture space + + Signed-off-by: Chris Wilson + +commit da0de7e55a9c1b64f3fb0d7b573bb61b0d2566df +Author: Chris Wilson +Date: Fri Oct 25 11:35:39 2013 +0100 + + sna: Add a line of DBG for when we discard uploads into CPU bo + + Signed-off-by: Chris Wilson + +commit 51c87f9acaa0c4eaaea581092088e1d524396f35 +Author: Chris Wilson +Date: Fri Oct 25 11:23:21 2013 +0100 + + sna/io: Propagate failure to XOR uploads + + Similar to the handling required for the normal upload paths. + + Signed-off-by: Chris Wilson + +commit 51590e55c0187862174a7dd5775915216b3137a6 +Author: Chris Wilson +Date: Fri Oct 25 11:03:05 2013 +0100 + + sna/io: Wrap the XOR upload paths with SIGBUS handling + + Signed-off-by: Chris Wilson + +commit f0d2f1d4e01c223cd6629245bceb24ae4dda215a +Author: Chris Wilson +Date: Thu Oct 24 19:45:30 2013 +0100 + + man: Mention the new default accel + + Signed-off-by: Chris Wilson + +commit 0d87113080d55cadf72c963f99179a2eb9a282e7 +Author: Chris Wilson +Date: Thu Oct 24 19:38:53 2013 +0100 + + man: State the negative aspects of TearFree + + Signed-off-by: Chris Wilson + +commit 2b6cb1cf45cff2bb4383bd6bf50aec0af8895079 +Author: Chris Wilson +Date: Thu Oct 24 15:42:12 2013 +0100 + + sna: Do not apply drawable offsets to DamageRegionAppend + + DamageRegionAppend() will itself apply the drawable offsets, so we need + to pass it the untransformed region. This also fixes an issue where we + might fallback without applying any Damage. + + Reported-by: Christian Nassau + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32734 + Signed-off-by: Chris Wilson + +commit 8e44b1f5543f6d36c33c743f1ba2143514f8afbf +Author: Chris Wilson +Date: Thu Oct 24 13:05:16 2013 +0100 + + sna: Fix canonical mode name to correctly use asprintf + + Whoops. Only the kernel sprintf() accepts NULL as a valid target string, + not libc's. + + Reported-by: Jay Little + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70835 + Signed-off-by: Chris Wilson + +commit 638d4f60285709b6efc04cef72d4b530460e3239 +Author: Chris Wilson +Date: Tue Oct 22 14:22:14 2013 +0100 + + sna: Remove the move-to-gpu shortcircuiting for partial GPU, no CPU damage + + Otherwise we may not correctly undo COW or pending move-to-gpu updates. + + v2: goto move_to_gpu instead for correcting the damage handling. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70821 + Signed-off-by: Chris Wilson + +commit e685e100705c1a5f4ef84b2bc355aa6b6ed0ab18 +Author: Chris Wilson +Date: Thu Oct 24 07:28:18 2013 +0100 + + Revert "sna: Remove the move-to-gpu shortcircuiting for partial GPU, no CPU damage" + + This reverts commit bccbbf8a68faf7aac274efd289d4916083b1a1e3. + +commit bd20791e8e4a9b8aa8e8dfe1cc76e91a471f5c67 +Author: Chris Wilson +Date: Wed Oct 23 16:15:35 2013 +0100 + + man: Describe the TearFree option + + Signed-off-by: Chris Wilson + +commit b70390b4f824afeed8f1b5a9baf79e33377405cd +Author: Chris Wilson +Date: Wed Oct 23 11:15:28 2013 +0100 + + sna: Reset bo after allocation failure during wait-for-shadow + + If we fail to allocate an alternate bo to replace the still visible + scanout bo, we stall and were supposed to continue using the old + wait->bo. However, we chose to use NULL instead which is going to lead + to an eventual crash. + + Signed-off-by: Chris Wilson + +commit 585340f75cb897e1293a887e8ef5a9552ea347cd +Author: Chris Wilson +Date: Wed Oct 23 09:50:24 2013 +0100 + + 2.99.905 snapshot + +commit aff67ada6cd2cb1f8adb5bec27a27fbc0f2884cc +Author: Chris Wilson +Date: Wed Oct 23 08:40:43 2013 +0100 + + sna: Tidy opportunistic flushing + + Rearrange the common code so that it should be tail-call optimised. + + Signed-off-by: Chris Wilson + +commit 11e8b299e11ff846e1c8090f7cbd34b2af850d85 +Author: Chris Wilson +Date: Tue Oct 22 17:36:58 2013 +0100 + + sna: Flush the pending move-to-gpu upon Pixmap free + + Signed-off-by: Chris Wilson + +commit 4eb736d61a3b45edb921799b74b3b164b94c174a +Author: Chris Wilson +Date: Tue Oct 22 17:35:33 2013 +0100 + + sna: Handle pending move-to-gpu for userptr uploads + + Signed-off-by: Chris Wilson + +commit c9e304a7194c1fd6038c59524d3c03756ea0d09e +Author: Chris Wilson +Date: Tue Oct 22 17:34:59 2013 +0100 + + sna: Pass the async hint when pushing GPU damage for redisplay + + So that we don't accidentally clear any other hints. + + Signed-off-by: Chris Wilson + +commit c51dd18eade425a7e280203b328b66d278fcba1c +Author: Chris Wilson +Date: Tue Oct 22 16:59:29 2013 +0100 + + sna: Fix inconsistency in has_coherent_ptr assertion + + We occasionally will read from an "incoherent" ptr in the belief that + the clflush hit will be worth it. + + Signed-off-by: Chris Wilson + +commit bccbbf8a68faf7aac274efd289d4916083b1a1e3 +Author: Chris Wilson +Date: Tue Oct 22 14:22:14 2013 +0100 + + sna: Remove the move-to-gpu shortcircuiting for partial GPU, no CPU damage + + Otherwise we may not correctly undo COW or pending move-to-gpu updates. + + Signed-off-by: Chris Wilson + +commit 1c282afb212d1d387d318256f4627385d12e1921 +Author: Chris Wilson +Date: Tue Oct 22 13:33:06 2013 +0100 + + sna: Make sure CPU damage is flushed to the TearFree shadow + + Signed-off-by: Chris Wilson + +commit 247ebf86a32b518536a11c2f866b2c885bd55d38 +Author: Chris Wilson +Date: Tue Oct 22 07:58:03 2013 +0100 + + sna: Only force the TearFree exchange before a write + + We can read from the current scanout buffer without incurring a visual + tear, so delay the GPU bo exchange until we see a write to the object. + + Signed-off-by: Chris Wilson + +commit 7b78f25d8992e56f83c897c3d2d7dd75cb7dd1d6 +Author: Chris Wilson +Date: Tue Oct 22 15:54:59 2013 +0100 + + xvmc: Handle errors along allocation path + + Signed-off-by: Chris Wilson + +commit 27249537d7a2c0c9f817716d657224175a2d9acb +Author: Chris Wilson +Date: Tue Oct 22 15:35:31 2013 +0100 + + sna: Free our CRTC private after failing to create the xf86Crtc + + Signed-off-by: Chris Wilson + +commit 9fcda71d753ab5126143f053c47513e9acf5c98b +Author: Chris Wilson +Date: Tue Oct 22 15:32:23 2013 +0100 + + sna/trapezoids: Fix inversion of initialisation test for triangles + + Signed-off-by: Chris Wilson + +commit 9fc95bebe783341aaf0e285ca2e216035378943c +Author: Chris Wilson +Date: Tue Oct 22 15:30:05 2013 +0100 + + sna: Ignore overflow in CPU count rather than abort + + If there are more processors than we ever expect, good! Just use lots of + them, rather than none at all. + + Signed-off-by: Chris Wilson + +commit e3f15cbf39696edae9f716bdcfbb7032ec7d7e3f +Author: Chris Wilson +Date: Tue Oct 22 15:19:15 2013 +0100 + + sna: Move gc back to GPU after failure to move it to CPU + + As the failure in gc move-to-cpu occurs late, i.e. after the function + pointers are updated to point to CPU functions, we need to undo those + changes, i.e. call move-to-gpu for the GC on failure. + + Signed-off-by: Chris Wilson + +commit 0d18b3956501e53e2ea6b5afcdf9af2f587fbc84 +Author: Chris Wilson +Date: Tue Oct 22 15:02:53 2013 +0100 + + sna: Discard GPU bo when failing to setup the shared pixmap + + If we fail to mmap the pixmap when preparing it for use with prime, be + sure to throw away the now lost priv->gpu_bo. + + Signed-off-by: Chris Wilson + +commit c0f31d822a2b10bc30ff2532b5ff87d2f401bc62 +Author: Chris Wilson +Date: Tue Oct 22 15:00:16 2013 +0100 + + sna: Free bo along unlikely one-off error path + + Add a missing free for a never-hit error. + + Signed-off-by: Chris Wilson + +commit d788b69fdb5ea73b1d283a89e53b2b19eaa90e6e +Author: Chris Wilson +Date: Mon Oct 21 23:44:29 2013 +0100 + + sna: Enable TearFree rendering for transformed scanouts + + References: https://bugs.freedesktop.org/show_bug.cgi?id=22969 + Signed-off-by: Chris Wilson + +commit fa2687bdd5a4c8bc608dac8bb711035f0752a725 +Author: Chris Wilson +Date: Mon Oct 21 18:55:23 2013 +0100 + + sna: Eliminate the synchronous wait from inside TearFree + + Defer the actual wait until the next use of the screen pixmap, and then + if needed replace the GPU bo with an alternative back buffer. + + Signed-off-by: Chris Wilson + +commit 83c1d1efa1d0d24ebe606065a4305b81fe64b73b +Author: Chris Wilson +Date: Mon Oct 21 17:52:05 2013 +0100 + + sna: Improve handling of blit fallbacks for untransfomed large scanouts + + Signed-off-by: Chris Wilson + +commit 8c562bac64d2ce80667c686a732d0f9cda6277ca +Author: Chris Wilson +Date: Mon Oct 21 15:31:44 2013 +0100 + + sna: Tweak opportunistic flushing to reduce power consumption + + When trying to conserve power, reduce the number of small batches we + emit - trying to maximise GPU efficacy and minimise CPU overhead. + + Signed-off-by: Chris Wilson + +commit 11211cd7c06a80c2dbbe07360857486b5b0d3094 +Author: Chris Wilson +Date: Mon Oct 21 13:35:24 2013 +0100 + + sna: Set the canonical name for the current mode if none match + + Always give the mode a name for pretty printing for the user. + + Signed-off-by: Chris Wilson + +commit 5d5dfb3e7a6056df7f6af1bcdc789a50ed00b068 +Author: Chris Wilson +Date: Mon Oct 21 13:25:01 2013 +0100 + + sna: Copy the EDID mode name for the current CRTC mode + + As the kernel does not preserve the name and driver type when returning + the current CRTC mode, we need to reconstruct those from the EDID mode + when available. + + Signed-off-by: Chris Wilson + +commit e1027ad7c60b9fd229ed196646c88ba7bb72a282 +Author: Chris Wilson +Date: Mon Oct 21 11:16:02 2013 +0100 + + sna: Fix typo inside an assertion + + Use the right dst_priv variable instead of priv! + + Signed-off-by: Chris Wilson + +commit 0b87b0c49a5208383e7472b58d36d3a558144496 +Author: Chris Wilson +Date: Mon Oct 21 11:06:30 2013 +0100 + + sna: Suppress log messages for unchanging EDID + + Whenever we reprobe an unchanging output and re-read its EDID, we emit a + useless log message. Previously this was squelched by trying to spot + when an EDID was unchanged through the use of its blob.id, however we + need to do a complete check on the contents in case the kernel returns + us a new EDID with the old id. So make a temporary copy of the current + EDID data and only squelch the log messages if the new EDID is an exact + match. + + Signed-off-by: Chris Wilson + +commit 33be42bf509b6d57face6b8d99d72dd5f6c90900 +Author: Chris Wilson +Date: Sun Oct 20 09:03:47 2013 +0100 + + sna: Fix the addition of the current output Mode to the probed lists + + We need to add the current mode to the Modes list and not directly to + the output->probed_modes as that gets overwritten. + + Signed-off-by: Chris Wilson + +commit b1ecadd7b44a8e95522cc4a6e4b908b071709e06 +Author: Chris Wilson +Date: Sat Oct 19 22:38:15 2013 +0100 + + sna: Unmap pixmap prior to release GPU bo + + As the unmap routine will deference the GPu bo in its debugging code, we + need to be sure that the pointer is still valid at the time of + unmapping. Hence unmap before release. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461 + Signed-off-by: Chris Wilson + +commit db086d02affe5109202dc9ee06c9e728a3ff0f3f +Author: Chris Wilson +Date: Fri Oct 18 17:30:18 2013 +0100 + + sna: Do a quick pass on dirty damage before reduction + + Signed-off-by: Chris Wilson + +commit eedcac9a2d1e3ab7c6e35135995d960e55dcad54 +Author: Chris Wilson +Date: Fri Oct 18 17:27:27 2013 +0100 + + sna: Drop now obsolete assertion + + We no longer unconditionally clear the CPU hint when moving to the GPU + for readonly updates, so we can no longer assert that the priv->cpu == + false afterwards. + + Signed-off-by: Chris Wilson + +commit dd280a69b500d2187925f67a541e045a7ae24b07 +Author: Chris Wilson +Date: Fri Oct 18 11:12:51 2013 +0100 + + sna: Tighten pixmap map assertions + + We need to also take account of upload buffers which include an offset + to the base map. To do so, we also need to stop conflating the cpu hint + with the current mapping flag. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461 + Signed-off-by: Chris Wilson + +commit f81a7f7192a821654bc72a6b34625a6367cb8479 +Author: Chris Wilson +Date: Fri Oct 18 09:19:14 2013 +0100 + + sna/glyphs: Remove glyph_approx_extents + + It didn't consider the height of the glyph above the baseline, i.e. it + was fundamentally flawed. The only thing to do is to make sure that + glyph_extents() is sufficiently fast never to show up in profiles. + (Until then QA should spot the ~10% regression.) An alternative would be + to feed the drawable clip extents to the render engine and avoid manual + clipping if the clip region covers the whole drawable. + + Reported-by: Clemens Eisserer + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70552 + Signed-off-by: Chris Wilson + +commit fb1c177eb7fa1745aa452b7a9573c0d0cea2a393 +Author: Chris Wilson +Date: Fri Oct 18 08:33:58 2013 +0100 + + Remove defunct file 'brw_eu_util.c' from git + + Signed-off-by: Chris Wilson + +commit 930b2c76c78dabc42749f819cb1f9566a6d870a1 +Author: Chris Wilson +Date: Thu Oct 17 17:16:56 2013 +0100 + + sna: Check return of source_bo for a potential failure + + Signed-off-by: Chris Wilson + +commit 2cf2312372ebde4168ae1e66a97d5c6b8daff1c3 +Author: Chris Wilson +Date: Thu Oct 17 17:14:13 2013 +0100 + + sna: Fix computation of clip boxes for stipple uploads + + References: https://bugs.freedesktop.org/show_bug.cgi?id=67865 + Signed-off-by: Chris Wilson + +commit 621eaba0d5c524878a8803ad285cb9b4b33654a7 +Author: Chris Wilson +Date: Thu Oct 17 12:01:02 2013 +0100 + + sna: Assert mapped state + + When mapped, assert that we point to the expected mapping of the GPU bo. + + Signed-off-by: Chris Wilson + +commit efe5c737ed20f2a0b14b479b14eccaf1963d5e01 +Author: Chris Wilson +Date: Thu Oct 17 11:32:39 2013 +0100 + + sna/dri: Refactor to use the common GPU damage routine + + Signed-off-by: Chris Wilson + +commit ec0866e86d365ae3fd9790b1b263d49fc4981220 +Author: Chris Wilson +Date: Wed Oct 16 22:39:54 2013 +0100 + + sna/glyphs: Fix computation of extents for long strings + + And make sure we consider such overflowing strings for correct clipping + against Windows. + + To offset the cost of doing a full extents check (~10% on aa10text), we + introduce an approximate extents query (~1% on aa10text). The disparity + should be rare, and should be an overestimate to force redundant + clipping. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70541 + Signed-off-by: Chris Wilson + +commit 09121a61b319ce365bfc6f96fb34c52d6eafffdf +Author: Chris Wilson +Date: Wed Oct 16 12:43:43 2013 +0100 + + sna: Fix inverted tiled CPU map check in has_coherent_ptr() + + Signed-off-by: Chris Wilson + +commit 2068492fba6201c548b1ee7a6eb5d0459f20d466 +Author: Chris Wilson +Date: Wed Oct 16 09:52:14 2013 +0100 + + sna: Only carry 32/64-bit compat wrapper for drm_mode_get_connector + + This is the only structure we care about that has u64 and its size is + not a multiple of u64s. + + Signed-off-by: Chris Wilson + +commit a63b4d5a0766a7e98efeff8dd520c58e9a1bea88 +Author: Chris Wilson +Date: Tue Oct 15 21:53:16 2013 +0100 + + sna: Expand packed KMS structs for 64-bit alignment + + Pavel Roskin found that with a 32-bit build of the DDX with a 64-bit + kernel that the call to GETCONNECTOR was overwriting the 4 bytes beyond + the end of the drm_mode_get_connector structure. This would appear to be + due to the surreptious padding inserted by the compiler so that the + structure would be naturally aligned on a 64-bit system. To compenstate + we need to insert padding between the adjacent 32-bit structures on the + stack. + + As usual, be paranoid and make sure that all the adjacent KMS structs we + use are padded out to an 64-bit boundary. + + Reported-by: Pavel Roskin + Signed-off-by: Chris Wilson + +commit dc072db862372f1424195c0c774d10f148b0fcc6 +Author: Chris Wilson +Date: Tue Oct 15 16:21:41 2013 +0100 + + sna: Add DBG along all output init failure paths + + Suggested-by: Pavel Roskin + Signed-off-by: Chris Wilson + +commit 8447e50824d26f3c61e665269534062f34380ef6 +Author: Chris Wilson +Date: Tue Oct 15 14:39:13 2013 +0100 + + sna: Allow read-mappings for has_coherent_ptr() assert + + The assertion was a little too specific and disallowed us to have a CPU + read-only mapping. + + Signed-off-by: Chris Wilson + +commit f41b0663dc2f6e7b6b190adef4dc27b1c7e8c609 +Author: Chris Wilson +Date: Tue Oct 15 14:30:41 2013 +0100 + + sna: Speed up inplace copies from SHM pixmaps to GPU bo + + Signed-off-by: Chris Wilson + +commit ad5b6a303b44ba0ae9f8df075a7efec92a2e41ff +Author: Chris Wilson +Date: Tue Oct 15 12:48:27 2013 +0100 + + Revert "sna: Preserve the user backlight value for get_property calls" + + This reverts commit 41b6b792d8e9c84c0a71a4bd7600e1c42e86b5bd in favour + of the better fix to not ask RRChangeOutputProperty to reset the known + hardware values. + + Signed-off-by: Chris Wilson + +commit e76b08cad2770015346fd4cd757de3bb3b6ff37c +Author: Chris Wilson +Date: Tue Oct 15 12:46:09 2013 +0100 + + sna: Disable updating properties upon reading their values + + When we assign the hardware values to the output properties, we do not + need to process the set_property callback to write those values back to + hardware. This callback is triggered by the pending update flag passed + to RRChangeOutputProperty. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70406 + Signed-off-by: Chris Wilson + +commit 41b6b792d8e9c84c0a71a4bd7600e1c42e86b5bd +Author: Chris Wilson +Date: Tue Oct 15 11:23:19 2013 +0100 + + sna: Preserve the user backlight value for get_property calls + + When querying the current backlight value, be sure not to overwrite the + last user set value by the call to RRChangeOutputProperty. + RRChangeOutputProperty calls into set_backlight_property, tricking us + into believing that the user has set a new backlight value. The result + is that we end up believing that the user chooses a 0 backlight if she + should happen to query the property whilst the output is disabled. + + Reported-by: reztho@archlinux.us + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70406 + Signed-off-by: Chris Wilson + +commit 0345cbec97d2848fe5e41043d8ddf4cf5e888c72 +Author: Chris Wilson +Date: Tue Oct 15 10:42:16 2013 +0100 + + sna/trapezoids: Initialise force_fallback + + Remember to set it initially to false so that we randomly do not start + using fallbacks. + + Fixes regression from + commit 0cd2c43fa8f3a66d612589ad1163a90e427668ac + Author: Chris Wilson + Date: Sun Oct 13 14:46:45 2013 +0100 + + sna/trapezoids: Use the aligned fast path for fallbacks + + Signed-off-by: Chris Wilson + +commit e952968ed7c6f1ec90752f10a5fb24ae2faa57f7 +Author: Chris Wilson +Date: Mon Oct 14 23:16:48 2013 +0100 + + sna: Assert that the mode/ring are set when marking active bo + + As we use the current ring to encode upon the bo relocs, we need that + ring to be properly setup prior to performing relocations. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=70461 + Signed-off-by: Chris Wilson + +commit 9f009c13beeb6b156e638975827d06b3cdedb0c6 +Author: Chris Wilson +Date: Mon Oct 14 11:54:35 2013 +0100 + + sna/gen6: Fix the invert fix + + Eek, missed that 8-wide dispatch branch still had the opposite fix that I was + testing first. + + Signed-off-by: Chris Wilson + +commit 8909f7423567a6902320c1a2e83abd501223fb84 +Author: Chris Wilson +Date: Sun Oct 13 14:39:30 2013 +0100 + + sna/gen6+: Fix calculation of 1/z for projective textures + + A typo crept in causing the shader to read from the wrong temporaries + for the invert operation. + + Signed-off-by: Chris Wilson + +commit 21577742e75165cb2bf34b1cab5bb2c3794c5b49 +Author: Chris Wilson +Date: Mon Oct 14 09:33:52 2013 +0100 + + sna: Tighten has_coherent_ptr() assertion + + Pass along the flags for read/write direction so that we know whether or + not we expect the gpu bo to be in the CPU write domain. + + Reported-by: Pavel Ondračka + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70436 + Signed-off-by: Chris Wilson + +commit 2987a6d5662fb3337f1400a51d016e1c5e21c063 +Author: Chris Wilson +Date: Sun Oct 13 18:50:03 2013 +0100 + + sna: Fix typo in DBG + + Signed-off-by: Chris Wilson + +commit 0cd2c43fa8f3a66d612589ad1163a90e427668ac +Author: Chris Wilson +Date: Sun Oct 13 14:46:45 2013 +0100 + + sna/trapezoids: Use the aligned fast path for fallbacks + + Route the fallback methods through the force_fallback aligned fast + paths. + + Signed-off-by: Chris Wilson + +commit 87d675061e324934a95412f9fe87a67c219d3fb9 +Author: Chris Wilson +Date: Sun Oct 13 13:39:04 2013 +0100 + + sna: Cleanup up unused variables + + commit 951f969fa63defbe7cfa52ca97c8985b157bbed0 + Author: Chris Wilson + Date: Sun Oct 13 12:47:20 2013 +0100 + + sna: Update DPMS on attached outputs before disabling the CRT + + left behind a couple of variables now deceased. + + Signed-off-by: Chris Wilson + +commit 951f969fa63defbe7cfa52ca97c8985b157bbed0 +Author: Chris Wilson +Date: Sun Oct 13 12:47:20 2013 +0100 + + sna: Update DPMS on attached outputs before disabling the CRTC + + We may want to take action such as preserving the current user value of + the backlight before disabling it whilst forcing a CRTC off. This + requires us to record that value first. + + Signed-off-by: Chris Wilson + +commit 8e7d6ddb9b485045b4662af83e048b06aab358aa +Author: Chris Wilson +Date: Sun Oct 13 11:04:02 2013 +0100 + + sna: Cleanup allocation of sna_output after late syscall fail + + If the second syscall fails (presumably as a deferred allocation failure + check), cleanup the allocations made so far before reporting the + failure. + + Signed-off-by: Chris Wilson + +commit f9a18c9f38d09c145eb513ca989966dc135c1e9b +Author: Chris Wilson +Date: Sun Oct 13 10:36:35 2013 +0100 + + uxa: Check for allocation failure in i915 video + + For a large screen, we have to create a temporary surface for rendering + the textured video. If this pixmap creation fails we may be left with a + system memory only pixmap leading to a segfault. + + Reported-by: Bas Wijnen + Signed-off-by: Chris Wilson + +commit 978b93a20bb2ba647138d0d8954fac60b215f7c6 +Author: Chris Wilson +Date: Sun Oct 13 10:34:50 2013 +0100 + + uxa: Abort CreateScreenResources after allocation failure + + One of UXA's invarients is that the ScreenPixmap is complete (i.e. has + an intel_pixmap private with a bo attached). If we fail to create that + private during CreateScreenResources we will die very soon afterwards, + so just report the failure and shutdown gracefully. + + Signed-off-by: Chris Wilson + +commit e914dada5595a24b5d0fada7e476cc93570fa7c5 +Author: Chris Wilson +Date: Thu Oct 10 17:14:36 2013 +0100 + + configure: Allow manual specification of intel-gen4asm path + + Signed-off-by: Chris Wilson + +commit 3e3af6936ea26be57e80e09752a8736c9cfe2566 +Author: Chris Wilson +Date: Thu Oct 10 22:16:53 2013 +0100 + + sna: Populate bo->size from dma-buf + + Recent kernels gained the ability to report the actual size of the + dma-buf through an lseek. We can use this to set the correct size of the + bo when available, overriding the guess provided by the caller. + + Suggested-by: Kristian Høgsberg + Suggested-by: Daniel Vetter + Signed-off-by: Chris Wilson + +commit f0bd716425d1514b62565f9a65397cd1cb2ffb3a +Author: Chris Wilson +Date: Thu Oct 10 16:22:45 2013 +0100 + + sna: Sanitize output->crtc before falling back oto xf86InitialConfiguration + + During initialisation, we stash the currently attached CRTC id in + output->crtc. This is fine as ordinarily we would not dereference + output->crtc until after it had been assigned a real CRTC. However, + + commit 6fda305e2f2f991b39d09e67d0b17c8c3d50f9a4 + Author: Chris Wilson + Date: Wed Oct 9 15:59:42 2013 +0100 + + sna: Append the current mode to the output list if not found + + introduces such an early dereference and causes a crash if we fail to + probe the KMS configuration (usually due to a user override). + + Reported-by: Łukasz Maśko + Signed-off-by: Chris Wilson + +commit 700a845cc611f3e499cf0ff01bd99d472d6fd7ac +Author: Daniel Martin +Date: Thu Oct 10 15:24:26 2013 +0200 + + configure: Add xfixes to X11 pkg check + + Add xfixes to the list of PKG_CHECK_MODULES for X11. '-lXfixes' was + hardcoded in test/Makefile.am before. This could lead to a broken build + in very rare cases where the build environment has all specified X + libraries but Xfixes. + + Signed-off-by: Daniel Martin + +commit 79f8ff4bbb2f723ec21c150c0775e706bc00a834 +Author: Chris Wilson +Date: Thu Oct 10 12:42:12 2013 +0100 + + sna/gen4+: Share a few common routines + + Signed-off-by: Chris Wilson + +commit 8bd9d63a863b88ecd6f72c11468e0940f3bcd9fc +Author: Chris Wilson +Date: Thu Oct 10 12:35:28 2013 +0100 + + sna/gen6+: Share the common routines for ring preferrence + + Signed-off-by: Chris Wilson + +commit ddcd8607027c67f8260ffd4eae8543f832885cb8 +Author: Chris Wilson +Date: Thu Oct 10 12:18:31 2013 +0100 + + sna/gen6+: Only allow switching to BLT for fills if we have semaphores + + An extra caveat to these generations for + + commit 97d809c26bec2c0120f2dc0bcfd840379bd996fa + Author: Chris Wilson + Date: Thu Oct 10 00:15:55 2013 +0100 + + sna: Pass usage hint down to render fill routines + + is that we don't want to incur ring switch overheads that may overwhelm + any advantages from using the BLT. + + Signed-off-by: Chris Wilson + +commit c99d44d7f09fc92daf64eee1f6f3300e11e1cf01 +Author: Chris Wilson +Date: Thu Oct 10 08:32:51 2013 +0100 + + sna: Prevent changes in tiling/pitch of existing framebuffers + + Reported-by: Daniel Vetter + Signed-off-by: Chris Wilson + +commit 97d809c26bec2c0120f2dc0bcfd840379bd996fa +Author: Chris Wilson +Date: Thu Oct 10 00:15:55 2013 +0100 + + sna: Pass usage hint down to render fill routines + + For the scanlines emitted for rendering Core drawing primitives, it is + preferable to use the BLT engine, so pass those hints down. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit b16999da214803a026d7246ec4aa62031e82dfc8 +Author: Chris Wilson +Date: Wed Oct 9 23:54:57 2013 +0100 + + sna: Upon unwinding operations, also check for exec objects to clear + + If we cancel an operation after partially committing it, we may leave + the batch bookkeeping in an inconsistent state with an exec object with + a zero-length batch. Ordinarily, this would not be an issue as we could + pass the extra object to the next batch. However, if we switch rings, we + need to clear the extra objects as they are currently flagged as being + on the wrong ring, leading to hilarity. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit b9ad5b625e8935a3c115760bdd4738d4432542e3 +Author: Chris Wilson +Date: Wed Oct 9 17:18:43 2013 +0100 + + 2.99.904 snapshot + +commit d1aa2ac5dddf6b8c8c1333aae415abda9ad72d85 +Author: Chris Wilson +Date: Wed Oct 9 16:22:59 2013 +0100 + + sna: Steal the current mode name + + Rather than duplicating a string, we can simply transfer ownership from + the temporary mode to the mode list. + + Signed-off-by: Chris Wilson + +commit 6fda305e2f2f991b39d09e67d0b17c8c3d50f9a4 +Author: Chris Wilson +Date: Wed Oct 9 15:59:42 2013 +0100 + + sna: Append the current mode to the output list if not found + + If for some reason the current mode on the CRTC (inherited most likely + from fastboot) doesn't match any of the modes reported by the output, we + end up with a stray mode that the client cannot control. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70132 + Signed-off-by: Chris Wilson + +commit d1cb39d0a86390b7ef704422a5b91f9a012d24a5 +Author: Chris Wilson +Date: Wed Oct 9 10:32:02 2013 +0100 + + sna/gen3+: Flush vertex buffer after computing resize + + Upon aligning the buffer, we may enlarge the vbo to accomodate the + vertex alignment and push the current index past the end of the buffer. + Move the space check from before the alignment computation to + afterwards. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 38333443b804b9ac6517a7998551b229dc4d5c6c +Author: Chris Wilson +Date: Tue Oct 8 16:12:06 2013 +0100 + + sna: Emit DBG for when we fallback to xf86InitialConfig detection + + Signed-off-by: Chris Wilson + +commit 082c08789cf9a8c0cc2bf44d0fee579b96c0798f +Author: Chris Wilson +Date: Tue Oct 8 09:40:34 2013 +0100 + + sna: Rework the num_threads refinement to avoid the division + + We can replace the division by a multiplication. + + Signed-off-by: Chris Wilson + +commit 06a8ad9690590a605b1564012d062b98c60546a6 +Author: Chris Wilson +Date: Mon Oct 7 23:21:38 2013 +0100 + + sna/trapezoids: Recompute num_threads to match range + + We need to be careful not to execute threads past the end of the alloted + buffer by making sure the clip extents correctly align. + + Reported-by: Joseph Yasi + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70204 + Signed-off-by: Chris Wilson + +commit 1fb4f60671cfb0e461a2e5969ee9d0f0e39d93a4 +Author: Chris Wilson +Date: Mon Oct 7 22:04:22 2013 +0100 + + sna: Trim color cache allocation to a single page + + Instead trying to allocate 4100 bytes, fix the logic to only require a + maximum of 4096 bytes in the cache buffer. + + Signed-off-by: Chris Wilson + +commit 55cd67485ff34a28ab8eaa7b1b6958b96c072317 +Author: Chris Wilson +Date: Mon Oct 7 14:06:31 2013 +0100 + + sna/trapezoids: Only use a single thread to emit rectilinear spans + + If the trapezoids are rectilinear, they should hit a fast path through + the span compositors and so threading them seems pointless. Expect + possibily for inplace pixman operations. + + Signed-off-by: Chris Wilson + +commit 55e0f4502657078a666761277bbac56a98b3780c +Author: Chris Wilson +Date: Mon Oct 7 11:56:23 2013 +0100 + + sna/gen7: Rename debug option ALWAYS_FLUSH to ALWAYS_INVALIDATE + + This allows us to distinguish between the texture cache invalidation + stage versus the opportunistic flushing, and test either. + + Signed-off-by: Chris Wilson + +commit eda87254937509502efacabaa6029a584f67764e +Author: Chris Wilson +Date: Mon Oct 7 11:54:59 2013 +0100 + + sna/gen7: Tweak flushing + + We pre-emptively flush the render cache before reads as that seems to + improve performance. Now try not flushing if we don't subsequently need + to read from the render cache. + + Signed-off-by: Chris Wilson + +commit 1c651848cc3f3baec8fa0bcfc68faebd3e58c069 +Author: Chris Wilson +Date: Mon Oct 7 10:30:20 2013 +0100 + + sna/trapezoids: Restore overflow check + + The range can indeed overflow, so promote the assertion back into a + check. + + Signed-off-by: Chris Wilson + +commit d462475b7ecca6eb001b521185d2f7286031a8d8 +Author: Chris Wilson +Date: Mon Oct 7 10:04:15 2013 +0100 + + sna/trapezoids: Fix overstepping vertical edges + + Regression from + + commit c98b770a87a5ec5ed9dc0aa375ad173b0e98322e + Author: Chris Wilson + Date: Fri Oct 4 18:37:01 2013 +0100 + + sna/trapezoids: Add a precise scan converter + + Reported-by: Joseph Yasi + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70204 + Signed-off-by: Chris Wilson + +commit c3fe60c15763c02b3b6238c77e6350d478cd8982 +Author: Chris Wilson +Date: Sun Oct 6 17:27:22 2013 +0100 + + sna/gen7: Add a always-stall debug option + + References: https://bugs.freedesktop.org/show_bug.cgi?id=68410 + Signed-off-by: Chris Wilson + +commit 7284e7f48b812948b40d67396214f7929c1c00eb +Author: Chris Wilson +Date: Sat Oct 5 23:00:49 2013 +0100 + + intel: Filter out the control bit from the device minor + + When computing the render node for the device, filter out the potential + control node. + + Signed-off-by: Chris Wilson + +commit 524a45da56e2a052ffafa3887891caa90ba39f76 +Author: Chris Wilson +Date: Sat Oct 5 18:42:24 2013 +0100 + + compat-api: Map changes of DamageUnregister API in 1.14.99.2 + + Reported-by: Emmanuel Benisty + Signed-off-by: Chris Wilson + +commit 43d616066fc35e6ac2282c0a8c5f9a11aac7b4f1 +Author: Chris Wilson +Date: Sat Oct 5 09:48:03 2013 +0100 + + sna/trapezoids: Do not pass invalid trapezoids to pixman + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1197921 + Link: http://lists.x.org/archives/xorg-devel/2013-October/037996.html + Signed-off-by: Chris Wilson + +commit c98b770a87a5ec5ed9dc0aa375ad173b0e98322e +Author: Chris Wilson +Date: Fri Oct 4 18:37:01 2013 +0100 + + sna/trapezoids: Add a precise scan converter + + Signed-off-by: Chris Wilson + +commit 27ad2fc1dcb2a6177eda7f1319b4f4eccdbea140 +Author: Chris Wilson +Date: Fri Oct 4 15:43:43 2013 +0100 + + sna: Start splitting the trapezoids megafile into parseable blocks + + Signed-off-by: Chris Wilson + +commit 898087014c36c757f8d2e0087e63467192a52837 +Author: Chris Wilson +Date: Fri Oct 4 16:12:17 2013 +0100 + + sna: Fix FillRectangles intersection with complex clip + + Lesson 2: Use the right variables. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70137 + Signed-off-by: Chris Wilson + +commit 20afd7263f65f29128fbbdbd5894a49594cda669 +Author: Chris Wilson +Date: Fri Oct 4 16:12:17 2013 +0100 + + sna: Tidy up FillRectangles intersection with complex clip + + Lesson 1: do not accidentally overwrite the loop count inside the loop. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70137 + Signed-off-by: Chris Wilson + +commit 22557b88d3c0bb8f883db7d0d0bf85f1255c65c9 +Author: Chris Wilson +Date: Fri Oct 4 14:14:19 2013 +0100 + + sna/dri: Only move the scanout to the flip cache if destroyed + + Under certain circumstances, we can retire the pageflip before the + client has updated its back buffers. This leads us to pre-emptively + moving the scanout to the cache, when all we need to do (and will do) is + report the same back buffer back to the client. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 394b2ce51d8378893f14896e600713544d473925 +Author: Chris Wilson +Date: Fri Oct 4 14:13:50 2013 +0100 + + sna: Add a few more DBG to track refcnts + + Signed-off-by: Chris Wilson + +commit dbf98d8963b53a3c68deb1e2624d1269c8b0d97a +Author: Chris Wilson +Date: Fri Oct 4 09:36:49 2013 +0100 + + sna/gen5: Replace pipe-control with full MI_FLUSH for required CS stall + + It appears that we need top-of-pipe synchronisation for changing of + certain state, and that the gen5 pipecontrol instruction is + insufficient. So we have to fall back on the good old MI_FLUSH in order + to make sure that the GPU invalidates its state correctly. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + Signed-off-by: Chris Wilson + +commit aa439ffee4ea0926b382c0f0fb5d41feae9d0f8f +Author: Chris Wilson +Date: Fri Oct 4 09:07:30 2013 +0100 + + sna: The device fd is marked as non-blocking so beware the busy-wait + + During redisplay we wait for the pageflip result. If the fd is marked as + non-blocking this results in a busy-wait, so insert a poll first to + remove the busy-wait. + + Signed-off-by: Chris Wilson + +commit be177465498e35425d36be84bc55b64bf91be84c +Author: Chris Wilson +Date: Fri Oct 4 08:40:49 2013 +0100 + + intel-virtual-overlay: Error out if no X11 SHM header is defined + + Make the error explicit rather than dieing later with unknown constants. + + Signed-off-by: Chris Wilson + +commit b8aed266194ebff1ee2da1b9f3f69b4c6bdc8bed +Author: Chris Wilson +Date: Fri Oct 4 08:37:48 2013 +0100 + + configure: Disable building tools if prerequisite headers not found + + After the pkg-config checks, we then probe the headers. If those probes + fail, we obviously wish to prevent building the tools as the build will + fail. + + Signed-off-by: Chris Wilson + +commit a0476ee6d0770156098aa633018addfc607c8a99 +Author: Chris Wilson +Date: Thu Oct 3 14:52:11 2013 +0100 + + intel: Allow opening the device only through platform information + + Only fail to open the device based on the PCI address, if and only if we + do not have sufficient platform information to find the correct system + device. + + Signed-off-by: Chris Wilson + +commit a47f8683fefc9caa4df914de59929ae99823ca37 +Author: Chris Wilson +Date: Thu Oct 3 15:58:26 2013 +0100 + + intel: Handle fallback probing without match_data + + One extreme fallback path through the xf86PlatformProbe results in a + call without any match data. As we have a device by this point, we can + simply do a reverse match. + + Signed-off-by: Chris Wilson + +commit 6c157a925f258fd4c82cf0c3004e7d0056c1cd70 +Author: Chris Wilson +Date: Thu Oct 3 15:35:54 2013 +0100 + + intel: Remove dependence upon having PciInfo + + After some probing mechanisms, we may end up with a valid device without + knowing its PCI address a priori. Having a valid device, we can just + query it for the correct device id, and can safely abort any path that + requires PCI information that we don't have. (Those paths are not valid + under such hosting anyway - if it may be required, we could reconstruct + the address.) + + Signed-off-by: Chris Wilson + +commit 4685e79d1163325b78722c84ce173c91c217ac02 +Author: Chris Wilson +Date: Thu Oct 3 14:42:45 2013 +0100 + + intel: And restore PlatformProbe to working order + + In the saga of the untested WIP patches for hosted device probing, was + the failure in logic to detect a valid device during probing. Yikes. + + Signed-off-by: Chris Wilson + +commit 58b26055f428fd6a99ffb889caa5e2472352b641 +Author: Chris Wilson +Date: Thu Oct 3 14:08:36 2013 +0100 + + intel: Querying device attributes must be non-NULL + + Check first for a NULL platform device before querying the attributes or + else suffer a segfault during PCI probing. + + Signed-off-by: Chris Wilson + +commit b7d5292e01fb43d93c13c60a3cef16d352307bdf +Author: Chris Wilson +Date: Thu Oct 3 13:36:46 2013 +0100 + + intel: Fix fallout from accident push of ODEV_ATTRIB_FD + + This is WIP for passing along a hosted fd. It wasn't meant to be pushed + along with the bug fix this morning. + + Signed-off-by: Chris Wilson + +commit adbf01306a9f42efb26a485a80c3c7f3918a48ba +Author: Chris Wilson +Date: Thu Oct 3 08:29:08 2013 +0100 + + sna: Restart timer evaluations if the BlockHandler takes too long + + Rather than passing a negative timeout to select, if we detect that we + expired our timeout during the processing of the BlockHandler, restart. + + More worrying is that something in the BlockHandler took longer than 3ms + to process. + + Reported-by: Felipe Contreras + Link: http://article.gmane.org/gmane.comp.freedesktop.xorg.devel/37388 + Signed-off-by: Chris Wilson + +commit 3b3a5ca603baa611b36f51b800f3969f519bcb3b +Author: Chris Wilson +Date: Wed Oct 2 18:29:38 2013 +0100 + + intel: Query platform fd + + Under a compositor, we wish to use the pre-authorized fd passed to us by + the host, stashed away in the platform device. + + Signed-off-by: Chris Wilson + +commit 79785920485d0327d5512db0ed6f81bf4d4eeb90 +Author: Chris Wilson +Date: Wed Oct 2 18:19:44 2013 +0100 + + intel: Pass the platform device along to the open routines + + This allows us to pass along more metadata along with the platform + device in future. Currently we pass the device path, but in a hosted + environment we should be passing along the authorized fd from the host. + + Signed-off-by: Chris Wilson + +commit db1edf0e10c6d3665d3bb2ffd381b1ba722cad95 +Author: Chris Wilson +Date: Wed Oct 2 16:17:35 2013 +0100 + + configure: Error out if glamor request but UXA is disabled + + Signed-off-by: Chris Wilson + +commit a048f436a0210d076fc844404bf56b8b7fcb4b7b +Author: Chris Wilson +Date: Wed Oct 2 14:59:11 2013 +0100 + + sna: Only delete unused io buffers + + Before deleting the io buffer, we need to check that it is not active. + Currently we check that it is not pending use in the current batch, but + we also need to double check that it does not have outstanding use by + the GPU. Failing to do so could mean overwriting the data prior to it + being read by the GPU, a very small race but often hit! + + Reported-by: Vedran Rodic # and many others + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66990 + Signed-off-by: Chris Wilson + +commit 660e9e14bd49fad75dd2fd73c285e035e2672da4 +Author: Chris Wilson +Date: Wed Oct 2 15:01:53 2013 +0100 + + sna: Add a few more asserts around handling of buffers + + Signed-off-by: Chris Wilson + +commit c724098f2215ff4f4193bbae3d8e42889701edf0 +Author: Chris Wilson +Date: Mon Sep 30 23:34:02 2013 +0100 + + sna/trapezoids: Fix clipping on the far left + + Edges that extend past the left hand side of the clip box cannot simply + be ignored (since they contribute to the scanline to their right, our + region of interest) but they need to calculated separately rather than + merged into the first cell. + + Reported-by: Pavel Ondračka + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69469 + Signed-off-by: Chris Wilson + +commit 1cf8d5134d8c6e73135ce368be7d92d49a5e27d2 +Author: Chris Wilson +Date: Mon Sep 30 15:37:20 2013 +0100 + + sna: Honour Option "AccelMethod" "none" + + If the user requests that acceleration be disabled either through + AccelMethod or NoAccel, do so. + + Signed-off-by: Chris Wilson + +commit 1d6a9d4a422b351440df3496d3d6cdefa82ce6c3 +Author: Chris Wilson +Date: Mon Sep 30 13:27:19 2013 +0100 + + sna: Only reduce Over to Src if the rects do not overlap + + Similar to the previous commit, we have to allow overlapping OVER + rectangles to be drawn one after another. + + Signed-off-by: Chris Wilson + +commit b9bce2303e3e51d2a703154869bb36564aad7921 +Author: Chris Wilson +Date: Mon Sep 30 12:39:51 2013 +0100 + + sna: Do not reduce overdrawn rectangles for XRenderCompositeRects + + The specification is that each is drawn in sequence (so over top of + earlier rectangles), so do not cheat by using the computed region. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66313 + Signed-off-by: Chris Wilson + +commit 0532b3cc3c98c255a64692094b9e258201422f85 +Author: Chris Wilson +Date: Mon Sep 30 12:38:39 2013 +0100 + + sna: Unmap cow bo when recreating the source bo + + When we destroy the original source and copy it to a new bo, we also + need to make sure that any mappings of the original bo in the clones are + undone. + + Signed-off-by: Chris Wilson + +commit aad53e37a7e6c842ae688df74a06024315e07ba2 +Author: Chris Wilson +Date: Mon Sep 30 12:38:19 2013 +0100 + + sna/gen3: Tidy up fallback handling from fill-boxes + + Signed-off-by: Chris Wilson + +commit 2c06e9576aa62290a133cea5158bb979284ac8a8 +Author: Chris Wilson +Date: Sun Sep 29 23:33:23 2013 +0100 + + sna: Use the bo allocation cache for converting buffers + + Since we have a malloc cache for the bo, we may as well use it when + converting from an upload buffer to a bo. + + Signed-off-by: Chris Wilson + +commit 57c799deb01b8a5919f872926cf71f11cb3aee15 +Author: Chris Wilson +Date: Sun Sep 29 23:33:11 2013 +0100 + + sna: Whitespace fixes + + Signed-off-by: Chris Wilson + +commit 81d00c51018464929cdb3755adb334cb9a89d166 +Author: Chris Wilson +Date: Sun Sep 29 14:29:06 2013 +0100 + + sna: Apply the non-relaxed fencing partial paranoia everywhere + + This is required to ensure that the tiled offsets are tile-row aligned. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1232546 + Signed-off-by: Chris Wilson + +commit a0bb41d16f75901bc18b7024679e2b3a35fc14f6 +Author: Chris Wilson +Date: Sun Sep 29 13:33:26 2013 +0100 + + sna/video: The sprite framebuffer also encodes its format + + So we need to check whether the cached framebuffer matches the requested + format, or else recreate. + + Signed-off-by: Chris Wilson + +commit 0dd20381364aabede2e1306945abe21d57c1d7b4 +Author: Chris Wilson +Date: Sun Sep 29 11:19:46 2013 +0100 + + sna: Resize an existing framebuffer if possible + + Sometimes we may have a compatible scanout cached, but of the wrong + size. Instead of throwing away the memory and creating a new scanout + from scratch, allow us to just resize the old scanout by destroying and + recreating its associated framebuffer. + + Signed-off-by: Chris Wilson + +commit 902ce98df10c221e136c416f981c3a2730410415 +Author: Chris Wilson +Date: Sun Sep 29 11:08:19 2013 +0100 + + sna/video: Don't allow caching of yuv scanouts + + We only want scanouts capable of being used for the front buffer in our + cache, so make sure that YUV formatted fb are destroyed upon release. + + Signed-off-by: Chris Wilson + +commit 4a7587ca1c076f25eed67751f9a9e26c5dcd1692 +Author: Chris Wilson +Date: Sun Sep 29 10:57:23 2013 +0100 + + sna/video: Discard old video buffers when the frame size changes + + Back in the good old days of the overlay, we only needed to care about + having a frame buffer large enough to hold the data. This changed with + the sprite interface which encodes the width x height into the + framebuffer and so we need to be careful when handing back a cached + buffer that it does indeed match the required dimensions. + + Reported-by: Ville Syrjälä + Signed-off-by: Chris Wilson + +commit 36d142153b45f4c95d606d14bbbb51d8fdec5d2e +Author: Chris Wilson +Date: Sat Sep 28 18:38:12 2013 +0100 + + 2.99.903 snapshot + +commit 2c67e9da5fc4c47f3f67082bd4adaf80d9e7399f +Author: Chris Wilson +Date: Sat Sep 28 10:13:25 2013 +0100 + + sna: Avoid reads from a GTT mmapped upload buffer + + We now allow LLC machines to also use GTT upload buffers, so we need to + be cache when scanning the cache to look for suitable buffers. + + Signed-off-by: Chris Wilson + +commit 5a5f9b2812a04721f9dbd67552a39c278cdde18b +Author: Chris Wilson +Date: Sat Sep 28 08:12:22 2013 +0100 + + sna: OsSigHandler expects 0 on handled + + Returning 0 from sigtrap_handler() when we wish to fallback to the core + OsSigHandler was precisely the wrong thing to do. + + Signed-off-by: Chris Wilson + +commit 2893d2b51653cc254000454ad054cd9f0afb1291 +Author: Chris Wilson +Date: Fri Sep 27 19:52:30 2013 +0100 + + sna: Fix regression in picture extraction + + This is a little helper function, that just returns a bool, not the + error code used by the render backends. Instead the caller tries an + alternative method of extraction before giving up. + + Signed-off-by: Chris Wilson + +commit 4c9265ebff496a4d4f974768e264bd65babff97e +Author: Chris Wilson +Date: Fri Sep 27 10:46:40 2013 +0100 + + sna: Only flush the scanout if we successfully upload it to the GPU + + Signed-off-by: Chris Wilson + +commit 47ac44159c0e3ea0c84510f1d58ac140344b5e69 +Author: Chris Wilson +Date: Fri Sep 27 10:19:47 2013 +0100 + + sna: Make sure we do not try to upload indirectly if the GPU is wedged + + Otherwise we trigger assertions and may end up with corruption. + + Signed-off-by: Chris Wilson + +commit 7206d0bb916fa69690a5f4fdcc5e7e81787c6c16 +Author: Chris Wilson +Date: Fri Sep 27 10:01:34 2013 +0100 + + sna: Disable the promotion of large bo as flush + + We can rely on our aperture and idleness tracking to appropriate flush + batches. Marking the large bo as flush interferes with the treatment of + flush for externally named bo, such as DRI/PRIME. + + Signed-off-by: Chris Wilson + +commit 6ac1ac98c28d38b539f465c5ac488d879f1c2ab6 +Author: Chris Wilson +Date: Thu Sep 26 23:23:47 2013 +0000 + + sna: Catch SIGBUS to prevent X death + + We know that when we access either a CPU or GTT mmap we are vulernable + to receiving a SIGBUS. In fact, we can catch these and abort the + operation preventing X and all of its clients from randomly dieing. + + This helps for instance if you try and use a 1GiB frontbuffer on a 2GiB + machine... + + For complete protection, we also need to catch signals for all GTT maps, + such as VBO and staging buffers. (TBD) + + Signed-off-by: Chris Wilson + +commit 7025956558cfc391b553c9adb39d2a38fe494946 +Author: Chris Wilson +Date: Thu Sep 26 16:20:06 2013 +0100 + + sna: Mark all large cached buffers as purgeable + + Signed-off-by: Chris Wilson + +commit 455754ca8d2762c6294e6db6b405da7959ab8a0f +Author: Chris Wilson +Date: Thu Sep 26 15:41:36 2013 +0100 + + sna: Make sure the transformed CRTC box is clipped correctly. + + Signed-off-by: Chris Wilson + +commit ec9ffc9e41e05bc6aef10e25ff82bb99b5f92267 +Author: Chris Wilson +Date: Thu Sep 26 14:54:18 2013 +0100 + + sna: Trigger fallback after intermediate pixmap allocation failure + + Signed-off-by: Chris Wilson + +commit bbfbe229542cc3278fea3c1865f28d65d3c154e8 +Author: Chris Wilson +Date: Thu Sep 26 15:14:29 2013 +0100 + + sna/gen4+: Handle very large copies more gracefully + + Signed-off-by: Chris Wilson + +commit 4d2840919fd00e4ae0bf1957f66009f55a01eb7b +Author: Chris Wilson +Date: Thu Sep 26 15:30:58 2013 +0100 + + sna: In desperation, query the actual available aperture space + + Signed-off-by: Chris Wilson + +commit bf1268838a30cca6a181c7804b0d2640dcf94981 +Author: Chris Wilson +Date: Thu Sep 26 14:48:31 2013 +0100 + + sna: Drop the REPLACES hint for a pinned target bo + + Signed-off-by: Chris Wilson + +commit 50bd37cf7fb811001e79a27b35e5cd0544391cd9 +Author: Chris Wilson +Date: Thu Sep 26 14:09:54 2013 +0100 + + sna: Simplify the clearing of a transformed frontbuffer + + Signed-off-by: Chris Wilson + +commit c9445af34a091f85d63f40982762fb58b267004d +Author: Chris Wilson +Date: Thu Sep 26 11:43:14 2013 +0100 + + sna: Remove a bogus assert + + We keep active/inactive scanouts in the same cache, so drop the assert + that they are all inactive - as it is handled a couple of lines later! + + Signed-off-by: Chris Wilson + +commit 17f47afcbc5bbbebd2dfb97f7423514104da750d +Author: Chris Wilson +Date: Thu Sep 26 11:42:05 2013 +0100 + + sna: Eliminate a DBG compile warn for 32-bit builds + + Signed-off-by: Chris Wilson + +commit 8ef851b223253c38e6367efdeff6b4d551cd2b6b +Author: Chris Wilson +Date: Wed Sep 25 15:07:48 2013 +0100 + + sna: Promote self-copies to the GPU + + Signed-off-by: Chris Wilson + +commit 1c7df83ca734c3d4206539c65d6f7a5c10537aa6 +Author: Chris Wilson +Date: Wed Sep 25 15:07:24 2013 +0100 + + sna: Micro-optimise copies + + Defer the read of the fExpose bit until we need it. + + Signed-off-by: Chris Wilson + +commit d7eb40efa79dd9ea720606b94a20179c7dd18e03 +Author: Chris Wilson +Date: Wed Sep 25 13:54:43 2013 +0100 + + sna: Check that the bo exists before attempting to undo it + + Fixes a NULL dereference from sna_blt_composite(). + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1228677 + Signed-off-by: Chris Wilson + +commit a934b2455a7b67d124903ab086a323169f0b4d69 +Author: Chris Wilson +Date: Wed Sep 25 12:06:56 2013 +0100 + + sna: Add a few more asserts around tracking of bo->exec vs bo->request + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 598dae9af99495cb738c6ddbe8602f8fa19dc0df +Author: Chris Wilson +Date: Wed Sep 25 10:53:11 2013 +0100 + + sna/gen[35]: Remove dead code for choosing between BLT/render composite + + For these gen, we always want to use BLT where possible - even if it + incurs a context switch. + + Signed-off-by: Chris Wilson + +commit 3a05b1a4aa96f4d4484e7397b8e8d901819a3799 +Author: Chris Wilson +Date: Wed Sep 25 10:52:17 2013 +0100 + + sna/gen6+: Fallback to BLT composite if fallback is forced + + Signed-off-by: Chris Wilson + +commit 5dfe9217f21870c2b3563fb2337254db316eea72 +Author: Chris Wilson +Date: Tue Sep 24 13:48:28 2013 +0100 + + sna: Clear CPU damage when uploading partial images inplace + + Signed-off-by: Chris Wilson + +commit 53b43673efed4d82b6dd498e9b76892e3e5b13e6 +Author: Chris Wilson +Date: Tue Sep 24 13:44:59 2013 +0100 + + sna: Add some DBG for early flushes + + Signed-off-by: Chris Wilson + +commit ad0390068832ad4727371902fe41a85a53de1894 +Author: Chris Wilson +Date: Tue Sep 24 10:00:03 2013 +0100 + + sna: Separate out copy preferrence from operating in place decision + + The two decision trees are no longer identical. + + Signed-off-by: Chris Wilson + +commit 63a81c87b1be3607243aaa0acc4cb669fee02b4b +Author: Chris Wilson +Date: Mon Sep 23 21:08:13 2013 +0100 + + sna/dri: Prevent a NULL dereference in a DBG msg + + Signed-off-by: Chris Wilson + +commit 3fd116782bb1c05a140f4783e92a8ee6a57143cd +Author: Chris Wilson +Date: Mon Sep 23 21:03:07 2013 +0100 + + sna/dri: Clear the clear hint upon applying DRI damage + + Otherwise a later call to GetImage will not notice the DRI update if it + was already clear - and so return a blank image. One example is the use + of x11vnc replaying xbmc. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69730 + Signed-off-by: Chris Wilson + +commit 8f54e9d3c43c04be0d405a94ae5a9d8fe8f8d75b +Author: Chris Wilson +Date: Mon Sep 23 19:34:25 2013 +0100 + + sna: Check OPTION_PREFERRED_MODE rather than M_T_USERPREF + + During the intial KMS probe, we do not yet have the list of output + modes, and in particular do not have the list of user preferred modes. + So, in order to honour the user preferrence, we need to query for any + preferred mode on the output from the option list. + + Signed-off-by: Chris Wilson + Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=841696 + +commit 3e276b96cb57050a9aa8ebfb210e3c4b7b2fe137 +Author: Chris Wilson +Date: Mon Sep 23 14:15:59 2013 +0100 + + sna/video: Add always-on-top to the list of Xv attributes + + Otherwise it goes unknown, and not reported by xvinfo. + + Signed-off-by: Chris Wilson + +commit e4850bbbccfc86ce36fae103038e91d5034dc517 +Author: Chris Wilson +Date: Mon Sep 23 11:54:47 2013 +0100 + + sna: Fix cast from u64 to pointer for 32-bit hosts + + Missing chunk from + + commit 42330fbae862cda9ca17ec62eb0d2e4fb86032b8 + Author: Chris Wilson + Date: Sun Sep 22 14:39:57 2013 +0100 + + sna: Track CPU/GTT maps independently + + Signed-off-by: Chris Wilson + +commit bee26a8e2eaefdcb2072ce8ba92585d3bf713c82 +Author: Chris Wilson +Date: Mon Sep 23 09:46:36 2013 +0100 + + sna/dri: Sanitize the backbuffer flip cache + + Signed-off-by: Chris Wilson + +commit c4f5da7ab9e02c3994fe9668630480f85e706e89 +Author: Chris Wilson +Date: Mon Sep 23 09:45:13 2013 +0100 + + sna/dri: Report saner target_msc values for vblank_mode=0 + + If desired target_msc is 0 report 0 rather than (CARD64)-1. + + Signed-off-by: Chris Wilson + +commit f296872f373d3439b08e055b03584763e6c2ffec +Author: Chris Wilson +Date: Sun Sep 22 17:29:33 2013 +0100 + + sna/dri: Fix SwapbufferWait + + A regression from + + commit f99e49f7642545f75bac682274767c45c2e6192a + Author: Chris Wilson + Date: Tue Sep 17 09:15:40 2013 +0100 + + intel: Make the option to control VSync and PageFlip explict + + which used the inverse meaning of the option to disable waiting on + swapbuffers. + + Signed-off-by: Chris Wilson + +commit 42330fbae862cda9ca17ec62eb0d2e4fb86032b8 +Author: Chris Wilson +Date: Sun Sep 22 14:39:57 2013 +0100 + + sna: Track CPU/GTT maps independently + + Now that we use CPU mmaps to read/write to tiled X surfaces, we find + ourselves frequently switching between CPU and GTT mmaps and so wish to + cache both. + + Signed-off-by: Chris Wilson + +commit dd130d1b06e8828d7a2471761bac36093b9a2391 +Author: Chris Wilson +Date: Sun Sep 22 13:11:50 2013 +0100 + + intel-virtual-overlay: Grab the server around mode manipulations + + Prevent other clients from seeing the intermediate states. + + Signed-off-by: Chris Wilson + +commit 8478e9c44477094e32868e2bb06d8d0077aabe62 +Author: Chris Wilson +Date: Sun Sep 22 10:32:24 2013 +0100 + + sna: Both clear PolyGlyph and ImageGlyph are no-ops + + For ImageGlyphs, we pre-clear the area hence the bg is always set. + + Signed-off-by: Chris Wilson + +commit 395f07b1fe950ad09d439a0b9eba1792ba6a245d +Author: Chris Wilson +Date: Sun Sep 22 10:31:15 2013 +0100 + + sna: Undo region translation after failing to begin ImageGlyphs + + If we fail the initial tests, we need to undo our translation to the + region before returning and starting the fallback paths. + + Signed-off-by: Chris Wilson + +commit 2851b7747bc8e143aa5c6209b8800eeccb629058 +Author: Chris Wilson +Date: Fri Sep 20 18:20:39 2013 +0000 + + sna: ImageGlyphs completely overwrite the destination + + So we can use the usual rules for discarding unused reads. + + Signed-off-by: Chris Wilson + +commit 27f87a56e9fe8cb0e3f41ddac9b3511d0316b436 +Author: Chris Wilson +Date: Fri Sep 20 18:18:54 2013 +0000 + + sna: Don't set the mapped hint for inplace tiled accesses + + The mapped hint is only useful for coherent mappings where it is + preferable to guide placement of regular operations. + + Signed-off-by: Chris Wilson + +commit 799f1e2355999fb8691cffee4033847c1d2c640b +Author: Chris Wilson +Date: Fri Sep 20 15:51:35 2013 +0000 + + sna: Prevent invalid use of set-write-domain on scanouts when debugging + + One debugging option forces the use of the write domain when + synchronising to force a full synchronisation. This trips up an + assertion to catch when we try to move the scanout into the CPU write + domain. So don't. + + Signed-off-by: Chris Wilson + +commit 011636d25be6b42ea1cf76e312d3abdf3855349d +Author: Chris Wilson +Date: Fri Sep 20 18:57:11 2013 +0100 + + intel-virtual-output: Hide the remote cursor on initial connection + + Signed-off-by: Chris Wilson + +commit 4497212307dee5e35bc6836201738a2fdb559020 +Author: Chris Wilson +Date: Wed Sep 18 17:03:40 2013 +0100 + + uxa: Do not change DPMS mode on unconnected outputs + + The operation is in theory redundant, and in the case of Haswell where + we have multiple outputs aliasing to the same encoder, actually harmful. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68030 + Signed-off-by: Chris Wilson + Tested-by: Stefan Dirsch + +commit 63a070a31a3963f836539ee7629d64fe3c9f88c8 +Author: Chris Wilson +Date: Wed Sep 18 17:03:40 2013 +0100 + + sna: Do not change DPMS mode on unconnected outputs + + The operation is in theory redundant, and in the case of Haswell where + we have multiple outputs aliasing to the same encoder, actually harmful. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68030 + Signed-off-by: Chris Wilson + +commit 011e567e84ce4487dd6e35f4c62682b4cbb66fe9 +Author: Chris Wilson +Date: Wed Sep 18 16:30:59 2013 +0100 + + sna: Add output names to DBG dpms changes + + Signed-off-by: Chris Wilson + +commit 0e1abe3cd01e5ea1fcb38c628d3ef81ecc0dae97 +Author: Chris Wilson +Date: Thu Sep 19 12:07:04 2013 +0100 + + sna/gen4: Remove long dead code for forced batch emission between CA passes + + Forcing the batch emission on virtually every glyph eats a lot of CPU + time sending very short commands to the GPU, and is totally unnecessary. + + Reported-by: Arkadiusz Miskiewicz + Signed-off-by: Chris Wilson + +commit 6316905983fe1fb4828ff1039923327f467306fa +Author: Chris Wilson +Date: Thu Sep 19 11:28:30 2013 +0100 + + intel: Fix includes for intel_options + + In commit dcf9b5ae1889926007cf8a0efd127e9df3c909de + Author: Chris Wilson + Date: Tue Sep 17 22:27:45 2013 +0100 + + intel: Compile fixes for base install of SLED11.sp3 + + the includes were juggled around to avoid pulling in xorg-server.h + outside of the driver. However, missing xorg-server.h leads to subtle + bugs in the layout of structures, in this case breaking xf86Options. + + Reported-by: FBrown + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69555 + Signed-off-by: Chris Wilson + +commit afad7dd43d935a4666bff6c2964714209e851221 +Author: Chris Wilson +Date: Wed Sep 18 15:34:36 2013 +0100 + + sna: Pushed dixPrivateKeyRegistered wrapper into compat-api.h + + Move the wrapping out of the main code body and hide it with the others + in our compatability header. + + Signed-off-by: Chris Wilson + +commit 53574e4f4ffe97f69c31ee74adceb81c8442c365 +Author: Chris Wilson +Date: Wed Sep 18 15:28:09 2013 +0100 + + sna: Wrap use of dixPrivateKeyRegistered for uevents + + SLED11 also requires us to poke around in the privates as it does not + provide the more recent privates API. + + Signed-off-by: Chris Wilson + +commit dcf9b5ae1889926007cf8a0efd127e9df3c909de +Author: Chris Wilson +Date: Tue Sep 17 22:27:45 2013 +0100 + + intel: Compile fixes for base install of SLED11.sp3 + + Highlights of that distribution include xorg-xserver-1.6.5, kernel + 3.0.76 and gcc-4.3. + + Signed-off-by: Chris Wilson + +commit 97b443f589fb62ba060f09a371be273549f524d0 +Author: Chris Wilson +Date: Wed Sep 18 11:44:53 2013 +0100 + + sna: Fix off-by-one in computation of valid CRTC mask + + Signed-off-by: Chris Wilson + +commit efffc42f227131792920391f9a87238743b2c490 +Author: Chris Wilson +Date: Wed Sep 18 11:43:24 2013 +0100 + + sna: Disable same-edid detection + + The kernel is quite able to return the same id for new edid. :( + + Signed-off-by: Chris Wilson + +commit 825557ce44b16b59438df31fd6df2ed82462be89 +Author: Chris Wilson +Date: Tue Sep 17 10:12:13 2013 +0100 + + sna: Clamp the possible-crtc mask to the real CRTCs + + A minor bit of sanitizing of the kernel output. + + Signed-off-by: Chris Wilson + +commit f99e49f7642545f75bac682274767c45c2e6192a +Author: Chris Wilson +Date: Tue Sep 17 09:15:40 2013 +0100 + + intel: Make the option to control VSync and PageFlip explict + + Too often our implementation of vsync or pageflip is buggy, or for some + other reason it is desired by the user to disable those code paths. Make + it possible once again by restoring the Options for the user to control. + + Signed-off-by: Chris Wilson + +commit 76790db4e6b33a439a6426ec73547904a50047c5 +Author: Chris Wilson +Date: Thu Sep 12 14:50:37 2013 +0100 + + test: Exercise flips/blit swaps on each pipe + + Signed-off-by: Chris Wilson + +commit bf4be323e377ab3a2741bf97d8f42fbbc4ccd449 +Author: Chris Wilson +Date: Thu Sep 12 13:47:18 2013 +0100 + + sna: Fix declaration of write intent for can_map__cpu in PutImage + + We always are going to write to the image, despite the flag set in + + commit fa961ec99a67266687a1934eea24138cf2f7ad19 + Author: Chris Wilson + Date: Sun Jul 21 18:00:22 2013 +0100 + + sna: Allow linear inplace uploads along the tiled X PutImage blt paths + + which was accidentally conditional on the image not being too large. + + Signed-off-by: Chris Wilson + +commit 4fb651cb5f6086121d9ad9182e2374d90470ecce +Author: Ross Burton +Date: Wed Sep 11 21:28:05 2013 +0100 + + test: only build DRI2 tests if DRI2 is enabled + + Signed-off-by: Ross Burton + +commit 815caa9fc660a4eec15992a52b0f8ff9c3c71c55 +Author: Chris Wilson +Date: Wed Sep 11 10:09:52 2013 +0100 + + sna/gen4+: Rebalance creation of vbo during batch flushing + + We need to be careful not to copy too much data during the vertex flush + or else that becomes the rate-limiting step. The goal here is to do the + early flush to warm up the GPU, then transition to larger batches. + + Signed-off-by: Chris Wilson + +commit 0d05a69bd74dc02fb1360c9393de905b8842e1fe +Author: Chris Wilson +Date: Wed Sep 11 10:18:51 2013 +0100 + + sna/gen4: Always try the BLT composite routines first + + Given how fragile the render operations are, taking the hit from + transitioning from the slow render operations to the comparatively fast + BLT (when possible) is always worth it. + + Signed-off-by: Chris Wilson + +commit 9a66d77efa53cff83e9711786c39e8ebff8dd26d +Author: Chris Wilson +Date: Tue Sep 10 12:29:24 2013 +0100 + + sna: Disable use of Y-tiling for gen4 + + This problematic GPU still seems to like to fallover when faced with + Y-tiling. It was reserved only for use with glyphs, but even that + occasionally runs into trouble, so disable all selection of Y-tiling for + our own use. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1222203 + Signed-off-by: Chris Wilson + +commit 8ff8eb2b38dc705f5c86f524c1cd74a811a7b04c +Author: Chris Wilson +Date: Mon Sep 9 16:23:04 2013 +0100 + + sna/hsw: Scanline waits require both DERRMR and forcewake + + Oh my, bspec is missing a few details on how to perform a scanline wait + on Haswell. But by using the extra steps required for Ivybridge, we can + successfully send events from the scanout to the BCS ring. Sadly this + again means that to use vsync on Haswell requires preventing the GPU + from sleeping whilst it waits for the scanout to advance. + + Reported-by: Dan Doel + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69119 + Signed-off-by: Chris Wilson + +commit dbe75982457cfe6bb1f7422a517ced32cc74f909 +Author: Chris Wilson +Date: Mon Sep 9 15:35:42 2013 +0100 + + sna/hsw: Fix the event selection for scanline waits on pipe A + + Hmm, this should have meant that we never actually waited for a + scan-line on pipe A. I wonder if it even works... + + Signed-off-by: Chris Wilson + +commit 144d97046156a3f7785f98c4f7dbed3fd8f5b7af +Author: Chris Wilson +Date: Mon Sep 9 15:34:41 2013 +0100 + + sna/gen6+: Only apply the BLT copy w/a for self-copies + + A missing check along the copy_boxes() path to bring the w/a into line + with the other paths. + + Signed-off-by: Chris Wilson + +commit af4215dd7fdf16b9886cff74765d6865bd743ddb +Author: Chris Wilson +Date: Mon Sep 9 15:02:28 2013 +0100 + + sna: Call the new __offset functions in the last commit + + Sigh. I added the new functions for the asserts, updated the parameters, + but forgot to change the actual function themselves. + + Signed-off-by: Chris Wilson + +commit 6d5df67b3e4ed5d5b9f1aabf01b5657d4c9eeac7 +Author: Chris Wilson +Date: Mon Sep 9 11:19:19 2013 +0100 + + sna: Remember to offset the box before asserting damage + + When using sna_copy_boxes__inplace(), we need to remember that the + region is in destination space, so we need to offset the boxes when + comparing against the source. The assertion forgot to do so, and so + failed as soon as it met a little complexity. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 634748486f33658f09c8a7f4508840fad6df85f2 +Author: Chris Wilson +Date: Sun Sep 8 23:02:29 2013 +0100 + + sna/gen4+: Flush batch if idle on filling vbo + + Signed-off-by: Chris Wilson + +commit 77d74ec777d511df6f5aa484f3b7752f2c0b96ad +Author: Chris Wilson +Date: Sun Sep 8 22:34:09 2013 +0100 + + sna/gen6: Prefer the RCS on large GT systems + + For SNB, the different between RCS and BCS is more marginal but it is + slightly in favour of using rendercopy on GT2. + + Signed-off-by: Chris Wilson + +commit 287727ee223d56705e5792fe0a6c9a99077559e6 +Author: Chris Wilson +Date: Sun Sep 8 17:59:10 2013 +0100 + + sna/gen7: Prefer the BLT for gt1 systems + + On gt1, the BCS is faster than the RCS for all equivalent operations, + unlike gt2+ where the RCS is faster (but at greater power draw). + + Signed-off-by: Chris Wilson + +commit f25235a854e211f73cc44821b9a7c2a1a4092155 +Author: Chris Wilson +Date: Sun Sep 8 16:36:33 2013 +0100 + + configure: Only assert DRI2 requirements not met if the DRI2 package is missing + + The new error message was added in + commit ea30967245707ca4825de154e589a83dc605dae0 [2.99.902] + Author: Chris Wilson + Date: Fri Sep 6 22:54:48 2013 +0000 + + configure: Disable UXA build without DRI2 + + Signed-off-by: Chris Wilson + +commit 0ceba648211009a464e46855a52737219ab9b534 +Author: Chris Wilson +Date: Sun Sep 8 13:51:14 2013 +0100 + + intel-virtual-output: Debug option for forcing full redraws + + References: https://bugs.freedesktop.org/show_bug.cgi?id=68987 + Signed-off-by: Chris Wilson + +commit 6a6517c748c33a73c92ca67cae9bfb00d48d2382 +Author: Chris Wilson +Date: Sat Sep 7 22:07:04 2013 +0100 + + sna: Only update the CRTCs after a resize if master + + It appears possible to race the framebuffer resize with a VT switch and + so end up attempting to update the CRTCs whilst master. The code + complains, but in reality we can just ignore the requested change until + we VT switch back and then apply the updates upon restoration of master. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 7ee7e373f24b0c4604dbf67f7ff82bdb7edc55d1 +Author: Chris Wilson +Date: Sat Sep 7 17:27:20 2013 +0100 + + sna: Split get_drawable_deltas() + + In some cases we know we only have a window, and so may skip a + conditional. + + Signed-off-by: Chris Wilson + +commit 218c9901e55e10fb5bc0c2a4caa04b1bee741a25 +Author: Chris Wilson +Date: Sat Sep 7 15:16:51 2013 +0100 + + NEWS: Fix release dates, missed the transition to September + +commit 58a7611ccfda88c7cbcc62b25b787d6b0fa64081 +Author: Chris Wilson +Date: Sat Sep 7 08:45:12 2013 +0100 + + 2.99.902 snapshot + +commit 0c697aee9b3767be7d1e04e4e4f9d304f23b188a +Author: Chris Wilson +Date: Sat Sep 7 08:42:26 2013 +0100 + + Revert "sna: Add XMir support" + + This reverts commit 42d94356f65972eb7fb8991234a4e9388c4c2031. + + Ordered-by: The Management. + +commit ea30967245707ca4825de154e589a83dc605dae0 +Author: Chris Wilson +Date: Fri Sep 6 22:54:48 2013 +0000 + + configure: Disable UXA build without DRI2 + + DRI2 is interwoven into the UXA structs, so simply disable building UXA + if DRI2 is not available. + + Reported-by: Ross Burton + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69056 + Signed-off-by: Chris Wilson + +commit 9fdaeec8f2ada82f790dcbd0018215103447a478 +Author: Chris Wilson +Date: Fri Sep 6 22:50:06 2013 +0100 + + sna: Search /sys/class/power_state for the AC adapter + + The adapter names are not uniform, so we need to scan the directory and + find the entry that corresponds to the Mains power supply. However, the + acpid does continue to report generic ac_adapter events. + + Signed-off-by: Chris Wilson + +commit 0485cdfb6dc8e51d57406f633d55f8a8ac1a0208 +Author: Chris Wilson +Date: Fri Sep 6 20:46:36 2013 +0100 + + sna/dri: Only the BackLeft merits special allocation flags + + As the BackLeft is the only that couled be flipped, it is the only one + that may end up as the scanout and so is the only one that should be + allocated from the scanout cache. + + Signed-off-by: Chris Wilson + +commit 489a93e4cc2e14e25339693933dddf4946717f11 +Author: Chris Wilson +Date: Fri Sep 6 15:14:46 2013 +0100 + + sna/gen6+: Switch to using the BLT more often when off AC + + The BLT is more power-efficient for the operations it can handle, so use + it when possible (following the usual caveats) if we know we only have + battery power. + + Signed-off-by: Chris Wilson + +commit f2ed1ac7b9807106405bbc2b18159a39c2d407d0 +Author: Chris Wilson +Date: Fri Sep 6 15:07:43 2013 +0100 + + sna: Listen to ACPI events for power state notifications + + When on-battery, we would prefer to use more power efficient operations. + For example, the BCS is far more economical to more data around with, but + it doesn't have quite the same throughput as the hungry RCS. (Not that + there is any reason why, the BCS is supposed to run at full memory + speed, unfortunately that is main memory speed and not the caches...) + + Note: that X already listens to acpid for video switch notifications, it + would be useful if we could extend that interface to emit power + notifications as well. + + Signed-off-by: Chris Wilson + +commit 56f532db2c9563c6d70da388f987f26530dcd38d +Author: Chris Wilson +Date: Fri Sep 6 12:48:06 2013 +0100 + + sna: Prefer to reuse CPU bo if it was last active rather than inplace uploads + + This helps short-circuit writes followed by immediate reads. + + Signed-off-by: Chris Wilson + +commit 7656755c9d5ac83848f924df3f6faa79a2a7955a +Author: Chris Wilson +Date: Fri Sep 6 12:18:51 2013 +0100 + + sna: Keep the CPU bo around if it was recently active + + Rather than always switching over to using the GPU bo and immediately + discarding the CPU bo, keep it around as we may want to reuse the cached + data. + + Signed-off-by: Chris Wilson + +commit 9a1f2ab84cfbcc1d37ae21de9a0ce6f1b5768e12 +Author: Chris Wilson +Date: Fri Sep 6 11:43:24 2013 +0100 + + sna: Try an inplace CopyArea fallback first + + This applies the copy-from-tiled-X GetImage optimistion to the + ShmGetImage paths - when we don't have userptr available. + + Signed-off-by: Chris Wilson + +commit 0b2e11ab3c81e74d37180aeb2bb1fce9bcd3870c +Author: Chris Wilson +Date: Fri Sep 6 11:12:28 2013 +0100 + + sna: Rechain up SetWindowPixmap upon ScreenPixmap change + + Fixes regression from + commit d2f19d5a1f4d1c9521fb4801c9fb649d19746150 [2.99.901] + Author: Chris Wilson + Date: Tue Sep 3 19:05:41 2013 +0100 + + sna: Tidy walking the window tree for updating our pixmaps + + Signed-off-by: Chris Wilson + +commit 1b1ac5193ead52dc32bf31f851d04600ea81ab1d +Author: Chris Wilson +Date: Fri Sep 6 11:11:47 2013 +0100 + + sna: Include some DBG for the virtual output detection + + So we can see it in the logs along with the regular outputs. + + Signed-off-by: Chris Wilson + +commit ccd605c492ef3fd657bc40ede3f318e7dddbd7a1 +Author: Chris Wilson +Date: Fri Sep 6 00:33:29 2013 +0100 + + intel-virtual-output: Unregister our singleton on a clean shutdown + + Signed-off-by: Chris Wilson + +commit 3c5caaf0a98c88f6d39be9e78f8427f05975cb0e +Author: Chris Wilson +Date: Fri Sep 6 00:30:53 2013 +0100 + + intel-virtual-output: Only wake up for a change in a visible cursor + + Signed-off-by: Chris Wilson + +commit 91b1f77da59ab7951e5d9aa09cbc0d2335d4c62a +Author: Chris Wilson +Date: Fri Sep 6 00:23:37 2013 +0100 + + intel-virtual-output: Make the flush for recreating Damage explicit + + Signed-off-by: Chris Wilson + +commit 3979d11677bb4eb54099b9a8d0a28d4807828223 +Author: Chris Wilson +Date: Thu Sep 5 23:28:16 2013 +0100 + + intel-virtual-output: Just request Damage BBox + + As we ourselves only track the BBox of damage on the virtual outputs, we + can ask X to amalgamate the damage events as well. + + Signed-off-by: Chris Wilson + +commit 0baac6bba72638a69b6cb04c74493ee48e253884 +Author: Chris Wilson +Date: Thu Sep 5 23:08:40 2013 +0100 + + sna/gen6+: Don't request extra caching for use-once upload buffers + + As we only use these buffers once, we should not benefit from requesting + them to be moved into L3/LLC cache - over and above the default + recommendations we make when creating the buffer. Indeed, this may even + lead to artefacts if we fail to invalidate those other caches when + reusing the buffers. + + Signed-off-by: Chris Wilson + +commit 2263f8f26fb3c4fabceac2e192e95c5d26a4d173 +Author: Chris Wilson +Date: Thu Sep 5 21:55:49 2013 +0100 + + intel-virtual-overlay: Reset damage across modesets + + Some versions of the Xserver lose Damage tracking across the modeset, + causing a loss of damage notifications and repainting to cease on the + virtual outputs. We can workaround this by reattaching the damage every + time we receive notification that the local Screen configuration + changes. + + Reported-and-tested-by: Severin Strobl + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68987 + Signed-off-by: Chris Wilson + +commit 5dea07c31d4d57d8d9aff68f2a9ffd73e828643f +Author: Chris Wilson +Date: Thu Sep 5 21:25:00 2013 +0100 + + intel-virtual-output: Reset the damage just prior to reading it back + + Slightly more efficient command packing and reduces a damage race + slightly... + + Signed-off-by: Chris Wilson + +commit bae41624874fa032c407f4888e7db9a07f8f1d0c +Author: Chris Wilson +Date: Thu Sep 5 21:23:56 2013 +0100 + + intel-virtual-output: We don't need to enable the timer for reconfigure + + The timer will be enabled if a reconfiguration actually takes place and + we mark the damaged region to be redrawn. + + Signed-off-by: Chris Wilson + +commit d9a48bd0a3cd3ca99b29a4038ea16a87771bfe31 +Author: Chris Wilson +Date: Thu Sep 5 20:52:11 2013 +0100 + + intel-virtual-output: Just walk the list of clones attached to the display + + Rather searching the entire array of all clones, just walk the presorted + list from the display. + + Signed-off-by: Chris Wilson + +commit b57dfc53312d9d7f30bfe45af44036b4c3c03790 +Author: Chris Wilson +Date: Thu Sep 5 19:40:07 2013 +0100 + + intel-virtual-output: Defer reenabling damage events until after we draw + + Signed-off-by: Chris Wilson + +commit 12de799598ffbbe056bd4455efefa62d4b081d98 +Author: Chris Wilson +Date: Thu Sep 5 19:36:13 2013 +0100 + + intel-virtual-output: Flush the damage received message back to the local display + + After processing the Damage notification, we need to send a message back + to the Xserver to clear the pending damage before we will be sent more + events. To make sure that message is sent we need to flush the output, + as we may never flush the output queue otherwise. + + Reported-by: Severin Strobl + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68987 + Signed-off-by: Chris Wilson + +commit 1ce52e93315afe7fdb33c315705fe22e69eb908c +Author: Chris Wilson +Date: Thu Sep 5 18:11:09 2013 +0100 + + intel-virtual-output: Track active clones + + For the frequent operations, such as moving the cursor or updating + damage, it is more efficient to walk the list of active outputs (as the + discrete GPUs support lots of outputs!) + + Signed-off-by: Chris Wilson + +commit f01c5eae2a3d6efebe9332a8654303356e622bec +Author: Chris Wilson +Date: Thu Sep 5 17:48:20 2013 +0100 + + intel-virtual-output: Reserve space for the '\0' in the sprintf + + Even though we don't use the trailing NUL byte for our comparisons, + sprintf will write it, so we need make space for it. + + Reported-by: Severin Strobl + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68987 + Signed-off-by: Chris Wilson + +commit e6bb553b7482de4d52b6914e8eac09f2e6014714 +Author: Chris Wilson +Date: Thu Sep 5 14:42:18 2013 +0100 + + sna: Add a DBG to track calls to SetScreenPixmap + + Signed-off-by: Chris Wilson + +commit 94bc69d5b9a0380cdd9941183b3b1c8e9beb8da5 +Author: Chris Wilson +Date: Wed Sep 4 13:49:56 2013 +0100 + + 2.99.901 snapshot + +commit 4dfd7674d88a267d0d89c31422f2e6c333ccf176 +Author: Chris Wilson +Date: Fri Feb 1 19:48:38 2013 +0000 + + intel: Select SNA as the default acceleration method + + Signed-off-by: Chris Wilson + +commit 42d94356f65972eb7fb8991234a4e9388c4c2031 +Author: Chris Wilson +Date: Wed Jul 24 01:44:30 2013 +0100 + + sna: Add XMir support + + With lots of updates by Christopher James Halse Rogers as he updated the + XMir API - but now supposedly frozen! + + " ickle: I think the xmir api should be pretty much stable now, + barring people coming up with more awesome ways of doing things." + + Signed-off-by: Christopher James Halse Rogers + Signed-off-by: Chris Wilson + +commit f906a4de62856df5b2536ce9704750c3530636fa +Author: Chris Wilson +Date: Wed Sep 4 15:08:56 2013 +0100 + + sna: WriteThrough support is now upstream + + Now that the WriteThrough ABI is upstream, we can rely on runtime + detection of the current interface. + + Signed-off-by: Chris Wilson + +commit 6f49a413aa812e6f41826d6d1099927e1164353b +Author: Chris Wilson +Date: Wed Sep 4 14:33:15 2013 +0100 + + configure: Check for required UMS headers before enabling + + Prevents the build failing with i810 if we can not find vgaHW.h + + Signed-off-by: Chris Wilson + +commit ecb3c303f8f62f5232f3e49c8df4193ea478be13 +Author: Chris Wilson +Date: Wed Sep 4 12:09:25 2013 +0100 + + sna: Fix sna_pixmap_move_area_to_gpu() to return the sna_pixmap + + Like it's sibling sna_pixmap_move_to_gpu(), it helps to know the private + sna_pixmap after the operation rather than just a boolean success/fail + result, and make it more robust in the process. + + Signed-off-by: Chris Wilson + +commit ad774cf3a299b220f9f2a0bed52c8fa979959426 +Author: Chris Wilson +Date: Wed Sep 4 11:37:01 2013 +0100 + + sna/dri: Refine proposed async swap interface + + The latest proposal for passing swap_interval==0 is through the normal + ScheduleSwap() call, so we can remove the specialised function. + + Link: http://lists.x.org/archives/xorg-devel/2013-September/037661.html + Signed-off-by: Chris Wilson + +commit d2f19d5a1f4d1c9521fb4801c9fb649d19746150 +Author: Chris Wilson +Date: Tue Sep 3 19:05:41 2013 +0100 + + sna: Tidy walking the window tree for updating our pixmaps + + Signed-off-by: Chris Wilson + +commit 47e718bf321f6fe80dc5f797f433b00bc8de91c7 +Author: Chris Wilson +Date: Tue Sep 3 17:37:33 2013 +0100 + + sna/dri: Handle failure to move the pixmap into the GPU for CopyRegion + + It should not fail, except in extreme cicumstances, and even then we shall + not crash. + + Signed-off-by: Chris Wilson + +commit 5c51cd4e9122b7b8ec54c24cdef6d47edc63d1d9 +Author: Chris Wilson +Date: Tue Sep 3 17:36:33 2013 +0100 + + sna: Mark imported PRIME fd as starting in DOMAIN_NONE + + Or rather, do not assume anything about the initial domains. + + Signed-off-by: Chris Wilson + +commit 92b750066834195803c9ad65b94184efa5db6e76 +Author: Chris Wilson +Date: Tue Sep 3 16:25:41 2013 +0100 + + sna: Add some more DBG + + Signed-off-by: Chris Wilson + +commit efc960b1358d12de6c806a655fabade7278e0651 +Author: Chris Wilson +Date: Tue Sep 3 01:00:23 2013 +0100 + + intel-virtual-output: Clear send flags when doing XSync + + When falling back to using XSync rather than XSendEvent it is imperative + that we remember to clear the flag so that we don't keep on performing + the synchronous RTT every time. + + Signed-off-by: Chris Wilson + +commit 6f090044d1de4160777963910df3586bdf0186dc +Author: Chris Wilson +Date: Mon Sep 2 23:52:52 2013 +0100 + + intel-virtual-output: Remember to mark the timer as active when moving the mouse + + Otherwise we throttle mouse updates to the next display update... + + Signed-off-by: Chris Wilson + +commit 91aca61c83f0905d1f6446dba56c5f67d91efb6f +Author: Chris Wilson +Date: Mon Sep 2 23:27:27 2013 +0100 + + intel-virtual-output: Don't clobber the XID inside the ShmSegmentInfo + + As there is an XID inside the ShmSegmentInfo we cannot share one between + both endpoints, or else it gets clobbered and rendering is lost (unless + by happy coincidence the last XID is available in both Xservers). + + Signed-off-by: Chris Wilson + +commit d54f0fa16ddb3985ace02544fc2a58926aed7115 +Author: Chris Wilson +Date: Mon Sep 2 22:56:03 2013 +0100 + + intel-virtual-output: Remove the stray 1 + + The 'output-is-changed' flags was accidentally initialised to 01 rather + than 0, causing all attached outputs to be considered to have changed + everytime. + + Signed-off-by: Chris Wilson + +commit 84b66849fc005365e71a40517c192e0cd178a82b +Author: Chris Wilson +Date: Mon Sep 2 22:55:17 2013 +0100 + + intel-virtual-output: Don't set the SHM active flag along !SHM composite paths + + Otherwise we may end up waiting for an event that will never be sent. + + Signed-off-by: Chris Wilson + +commit 13a28f607f0eb4b4906e856c3f75f53446f4f999 +Author: Chris Wilson +Date: Mon Sep 2 22:37:23 2013 +0100 + + intel-virtual-overlay: Try to shutdown gracefully + + Attempt to clean up the VIRTUAL mess when we exit. + + Signed-off-by: Chris Wilson + +commit e6e6572ac8f15bfee204cdf6bee4661ee2c6ffbb +Author: Chris Wilson +Date: Mon Sep 2 22:27:42 2013 +0100 + + intel-virtual-output: Fallback to probing GetScreenResources + + If the Display doesn't support the more recent non-forced-detection + GetScreenResources, use the older version instead. + + Signed-off-by: Chris Wilson + +commit 7c5d269f259dd247c04a374467577cd47cc2cc27 +Author: Chris Wilson +Date: Mon Sep 2 22:07:46 2013 +0100 + + intel-virtual-overlay: Keep bumblebeed awake + + bumbledeed will shutdown its Xserver when the last connection to it + closes. For the moment, leak the control socket so that the display + stays alive. However, we will want to attach to any Xservers created by + bumblebee as opposed to creating them. + + Signed-off-by: Chris Wilson + +commit c8dc27e00ef052c585abaa27c09f564c1548c87b +Author: Chris Wilson +Date: Mon Sep 2 21:53:37 2013 +0100 + + intel-virtual-overlay: Disable the timer after flushing + + As the flush may queue work that causes the timer to be reactivated + prior to draining the queue, we need to flush first then turn off the + timer if idle. + + Signed-off-by: Chris Wilson + +commit d3558251777ab71b2a505d7acb2edd35d05b0d58 +Author: Chris Wilson +Date: Mon Sep 2 21:46:35 2013 +0100 + + intel-virtual-overlay: Don't do a sibling search if bumblebee is explicitly requested + + If either all or bumblee is explicitly requested, don't automatically + perform the other search. + + Signed-off-by: Chris Wilson + +commit d2f7f85cd20fb3a2bb3dba8c9be7ff21d2a8c049 +Author: Chris Wilson +Date: Mon Sep 2 21:41:48 2013 +0100 + + intel-virtual-overlay: Fix the bumblebee query parsing + + It supplies both a trailing newline, NUL byte and length. + + Signed-off-by: Chris Wilson + +commit 5fed6e24996eb0fcfeec19341ce4103e7e7eb2d8 +Author: Chris Wilson +Date: Mon Sep 2 21:19:24 2013 +0100 + + intel-virtual-output: Perform pixel type conversion from XfixesCursorImage + + For whatever reason, Xfixes uses "unsigned long" in its protocol + definition for the cursor pixels. + + Signed-off-by: Chris Wilson + +commit b955622cc25ab12305a572901a8ed0f23896dab3 +Author: Chris Wilson +Date: Mon Sep 2 20:45:12 2013 +0100 + + intel-virtual-ouptput: Filter and rate-limit cursor events + + Make sure we are not responding to cursor motion on other screens, by + checking for our root window. + + Signed-off-by: Chris Wilson + +commit 5af9d69485a241156c343b67a741bc024e3f6edf +Author: Chris Wilson +Date: Mon Sep 2 19:50:17 2013 +0100 + + intel-virtual-output: Reorder the fds + + We can't place the record fd at after the displays as we may wish to + clone more displays later and use the simplification that they are in a + linear, contiguous block at the end of the fd array. + + Signed-off-by: Chris Wilson + +commit 88d43dc2aea1ee4b8a3248bf442f5be362b32fbe +Author: Chris Wilson +Date: Mon Sep 2 17:30:15 2013 +0100 + + intel-virtual-output: Refactor the image resizing code + + And add lots of debug and robustness. + + Signed-off-by: Chris Wilson + +commit 1b07f16ffeb3152817e9e4f77ca0f2c403fb9040 +Author: Chris Wilson +Date: Mon Sep 2 18:10:27 2013 +0100 + + intel-virtual-overlay: Fix logic inversion from previous commit + + "if (!active == 0)" + + Whoops, but keep the debugging that highlighted the error. + + Signed-off-by: Chris Wilson + +commit 088ff35b3941724c59707cf7971c09f9a15e5ddb +Author: Chris Wilson +Date: Mon Sep 2 16:51:57 2013 +0100 + + intel-virtual-output: Don't forget to name the mode + + Signed-off-by: Chris Wilson + +commit 4b3669548abf9a3c562b468359d8bee1cc86fb32 +Author: Chris Wilson +Date: Mon Sep 2 16:13:38 2013 +0100 + + intel-virtual-output: Fallback to Xinerama if RandR is not supported by the target + + With Xinerama, we do not support reconfiguration of the target's CRTCs + but we can still paint! + + This will require some more work to try and minimise the incompatibility + between configuring Randr displays locally and the static arrangement + remotely. But you can paint! + + Signed-off-by: Chris Wilson + +commit 0ee287af222552f4968f7d78ebc748db5bed5963 +Author: Chris Wilson +Date: Mon Sep 2 15:42:09 2013 +0100 + + intel-virtual-overlay: Prevent buffer overrun reading the XEvent + + When calling XNextEvent() you must provide it with space for any event, + i.e. XEvent, and not be tempted to pass in the specific type you are + waiting for! + + Reported-by: Philipp Adolf + Signed-off-by: Chris Wilson + +commit dd5f17ed3adf0c4e7c642f685f61766d12247c0e +Author: Chris Wilson +Date: Mon Sep 2 15:13:44 2013 +0100 + + intel-virtual-output: Decouple the fake mode before deleting + + When we install a fake mode on the output, we have to perform a + round-trip for a reprobe. During that time, some other client (such as + gnome-shell) will be notify of the change in output status and may + attempt to configure it. This leaves us unable to delete the mode as it + is currently active - so first disable the new head and then delete the + mode. + + Signed-off-by: Chris Wilson + +commit 529db4d5edf396757f4f10a2b3aac55ad7e0bbc1 +Author: Chris Wilson +Date: Mon Sep 2 13:04:49 2013 +0100 + + sna: Check for output->randr_output before dereferencing + + As we may call the ->detect() routines during the fallback initial + probing, we need to handle the case where the output callbacks are + called before RandR is setup. + + Regresion from + commit 8ecb758697af42e8e68edee0d1945986470a9c04 + Author: Chris Wilson + Date: Sat Aug 31 19:44:50 2013 +0100 + + sna: Expand the array of fake outputs if the last is used + + Reported-by: Andreas Reis + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68843 + Signed-off-by: Chris Wilson + +commit 9ac895fccba72c6d4c0e754ab5298ece7dc8632d +Author: Chris Wilson +Date: Mon Sep 2 13:03:33 2013 +0100 + + sna: Process winSize region + + Sometimes the window size is not a simple box, but a full region. In + which case we do need to process it and not just assert that it is a + box! + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 962460c0e1a22c3db9c1a25227eb9f1d1f1542d3 +Author: Chris Wilson +Date: Mon Sep 2 12:33:55 2013 +0100 + + intel-virtual-output: Probe and automatically enable sibling screens + + Look for screens on the same display that we can enable automatically. + + Signed-off-by: Chris Wilson + +commit f5fdbf6f23c2e90235f511714481bc9250f60020 +Author: Chris Wilson +Date: Sun Sep 1 17:08:54 2013 +0100 + + intel-virtual-output: Add missing whitespace, s/while(1)/while (1)/ + + No functional changes. + + Signed-off-by: Chris Wilson + +commit 8654bd7f6670a55b53ad6a7d0f14fe446124d41a +Author: Chris Wilson +Date: Sun Sep 1 17:07:49 2013 +0100 + + intel-virtual-output: Restore the lost POLLIN on the timerfd + + Signed-off-by: Chris Wilson + +commit 3f03cafcb5f1a5b5a23006ced78a4db5ff6659fb +Author: Chris Wilson +Date: Sun Sep 1 16:50:22 2013 +0100 + + intel-virtual-output: Refer to the new memory block after realloc + + When updating pointers to point into the new memory block after a + realloc, it helps to pass the new locations around rather than the old. + + Signed-off-by: Chris Wilson + +commit 7e6472cfccb66d961efa3acbdbfa4057413cbcaf +Author: Chris Wilson +Date: Sun Sep 1 16:44:14 2013 +0100 + + intel-virtual-output: Rebuild pointers after realloc + + If reallocs gives us a new memory block, we need to update everything + that pointed into the old blocks. + + Signed-off-by: Chris Wilson + +commit a41acee7282f007ed8e589395597f8aea3b22361 +Author: Chris Wilson +Date: Sun Sep 1 13:56:18 2013 +0100 + + intel-virtual-output: Register as a singleton + + If the user tries to use multiple commands to combine multiple displays, + reroute those to the first instance. + + Signed-off-by: Chris Wilson + +commit 3f75e95f26a48929e5b996a825be8a222c07aa6e +Author: Chris Wilson +Date: Sun Sep 1 11:49:18 2013 +0100 + + intel-virtual-output: Fix overun with the record Display connection + + When converting to the auto-extending arrays, I forgot to include room + for the extra connection for the recording Display. By using an + explicit variable within the global state it is a little more clear. + + Signed-off-by: Chris Wilson + +commit 89dc44ae4550162fe12ce0dd68c5e7f072558fc7 +Author: Chris Wilson +Date: Sun Sep 1 11:46:26 2013 +0100 + + intel-virtual-output: Prevent cloning the same output twice + + And prevent cloning the localhost! The caveat is that the transport + string (Display name) must match, so it still would be possible to + connect to the same display with different transports (local sockets and + TCP sockets for socket) and so cause confusion. + + Signed-off-by: Chris Wilson + +commit d1d277db9b94b7145347130e564fc3d5713ecd0e +Author: Chris Wilson +Date: Sun Sep 1 00:45:51 2013 +0100 + + intel-virtual-output: Manage multiple destination CRTCs + + Don't try to assign all the remote outputs to the same crtc. + + Signed-off-by: Chris Wilson + +commit 47b7e334c1c66f4649b09e08bd93fb112399d1d0 +Author: Chris Wilson +Date: Sat Aug 31 22:39:18 2013 +0100 + + intel-virtual-output: Try to hide races with gnome-shell + + As we try to create VirtualHeads, gnome-shell tries to enable them. + Leading to a lot of flashing and extraneous modes appearing. Without + being able to grab the screen configuration for the duration of our + pruning, there does not seem much we can do other than try and squelch + the worst of the errors. + + Signed-off-by: Chris Wilson + +commit 7228bd391049be2d07c27dcf88edc2d5bff70898 +Author: Chris Wilson +Date: Sat Aug 31 21:50:55 2013 +0100 + + intel-virtual-output: Clone all outputs on the remote display + + Now that we allocate VirtualHeads on the fly, we can query the list of + available outputs on the target display and clone them all, rather than + manually passingthe list of outputs to clone. + + Signed-off-by: Chris Wilson + +commit 028412faa7bb1d276e1dcdbe485c920acf73a719 +Author: Chris Wilson +Date: Sat Aug 31 20:58:48 2013 +0100 + + intel-virtual-output: Third time lucky for computing the correct stride? + + Aligning a 16-bpp image to a 32-byte boundary is tricky, apparently. Or + at least I make it look so. + + Signed-off-by: Chris Wilson + +commit 8ecb758697af42e8e68edee0d1945986470a9c04 +Author: Chris Wilson +Date: Sat Aug 31 19:44:50 2013 +0100 + + sna: Expand the array of fake outputs if the last is used + + Always maintain one spare so that we can reconfigure for any number of + desired outputs on the fly. + + Signed-off-by: Chris Wilson + +commit 57904e8d3d1deef33dd5515f3179b4d60c912712 +Author: Chris Wilson +Date: Sat Aug 31 18:58:07 2013 +0100 + + intel-virtual-output: Fix calculation of image stride to include bitmap unit + + Signed-off-by: Chris Wilson + +commit 9742ff3ae1696b7a2cc2be1849aedd8894914af4 +Author: Chris Wilson +Date: Sat Aug 31 18:22:58 2013 +0100 + + intel-virtual-output: use depth-16 transfers for remote hosts or low bpp targets + + Avoid up-converting to a depth-24 image and wasting extra bandwidth if + either end-point is only using depth-16. + + Signed-off-by: Chris Wilson + +commit 6509e46ecac968d177789cd4731e7721bb62f35a +Author: Chris Wilson +Date: Sat Aug 31 17:08:11 2013 +0100 + + intel-virtual-output: use XRender for format conversion if required + + Support rendering between mixed depths by using Render to stage the + transfer into our x8r8g8b8 image. An improvement would be to use the gcd + intermediate depth so we don't waste bw unecessarily. + + Signed-off-by: Chris Wilson + +commit ead32f4a1498c2f7b7c74856e97f9e602ed7a274 +Author: Chris Wilson +Date: Sat Aug 31 16:13:14 2013 +0100 + + configure; Remember to disable building the tools + + If we find that the headers for the tools are not available on the + system, simply disable building them as they are not essential features + of the driver. + + Signed-off-by: Chris Wilson + +commit 8067255dc9185e85b110254ffbea4d9682d3aa2d +Author: Chris Wilson +Date: Fri Aug 30 20:24:41 2013 +0100 + + tools: Add intel-virtual-output to extend the local desktop with remote outputs + + Based on the original implementation (hybrid-screenclone) by + Tomáš Janoušek, and Bumblebee integration by Kevin Puetz. + + intel-virtual-output utilizes local VirtualHeads to present a contiguous + desktop to the local display manager, but maps the drawing on those + outputs to the remote display, and provides bidirectional RandR proxy so + that you can resize the remote display and configure it within your + desktop. The remote display should also send hotplug events back to the + local desktop, for reconfiguration on the fly. + + Ideally the remote display is a discrete GPU on the same host so that we + can use local Shared Memory transport and avoid sending data over the + wire (though it will work in that setup). Ideally you would have userptr + support to provide zero-copy rendering between the GPUs, or have dma-buf + (in which case you would be using PRIME). For remote rendering, no + compression is done so this fares worse than VNC. + + Signed-off-by: Chris Wilson + +commit dbf5751b5bc69e2515018a73540d1fb6dddc4502 +Author: Chris Wilson +Date: Sat Aug 31 00:25:16 2013 +0100 + + sna: Open the device non-blocking + + This is essential to prevent deadlocks when running with ZaphodHeads. + + Signed-off-by: Chris Wilson + +commit 82dbe3ff81a9f3775f8588c919062317d1cd60a0 +Author: Chris Wilson +Date: Fri Aug 30 20:23:57 2013 +0100 + + sna: Mark fake outputs as disconnected until a user applies a mode + + Hide the fake outputs until they are instantiated by a user. + + Signed-off-by: Chris Wilson + +commit 6d99249c580cfb062a05ce1da446410741eb1223 +Author: Chris Wilson +Date: Fri Aug 30 03:03:58 2013 +0100 + + sna: Protect against unattached pixmaps when peeking inside for a GPU bo + + Prevent a NULL dereference for the small system pixmaps. Introduced with + + commit f22d7f68b8b1bd5caf5ae831fca63eb1e6957520 + Author: Chris Wilson + Date: Wed Aug 28 14:24:33 2013 +0100 + + sna/gen6+: Improve ring stickyness for BLT composite ops + + Reported-by: Sami Farin + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68728 + Signed-off-by: Chris Wilson + +commit 314cfd7353c8c1acd961fdfc8eadbc0d55fa0f01 +Author: Chris Wilson +Date: Thu Aug 29 21:30:28 2013 +0100 + + sna/dri: Correct the target_msc for immediate double-buffering + + We also need to correctly offset the current_msc for the normal + pageflip, so rearrange the code flow so that we only do the calculation + of target_msc once. + + Signed-off-by: Chris Wilson + +commit 68d139388a2a037347fa5c838391e67e006793ee +Author: Chris Wilson +Date: Thu Aug 29 23:00:05 2013 +0100 + + sna: Allow user specification of number of VirtualHeads + + Previously, we instantiated a fake output in case we had a machine with + no output. (For certain server-class products.) The Bumblee project were + also doing something very similar in order to fake an extended desktop + on the Intel igfx and copy portions onto a discrete GPU. (The preferred + method for doing this upstream is through the use of PRIME). As the code + is very similar, we can support both use-cases simultaneously. + + This adds the option: + + Section "Device" + Driver "intel" + Option "VirtualHeads" "" + EndSection + + to allow the user to specify an additional set of fake outputs, which + can then be controlled using xrandr. + + Signed-off-by: Chris Wilson + +commit 92a43caab96e7f49c541fb999b75925914d9981a +Author: Chris Wilson +Date: Wed Aug 28 14:51:09 2013 +0100 + + sna/gen6+: Don't force a ring switch for likely TLB misses if already busy + + If the target is already on the render ring, don't force the switch away. + + Signed-off-by: Chris Wilson + +commit f22d7f68b8b1bd5caf5ae831fca63eb1e6957520 +Author: Chris Wilson +Date: Wed Aug 28 14:24:33 2013 +0100 + + sna/gen6+: Improve ring stickyness for BLT composite ops + + Rearrange the tests so that we check both src/dst for which rings they + are currently on. + + Signed-off-by: Chris Wilson + +commit c451a471fbe1553c0273f3bd12f3c1a42f7ce193 +Author: Chris Wilson +Date: Tue Aug 27 19:06:52 2013 +0100 + + sna/video: Copy the ClipRegion for the sprite + + A cut'n'paste error dropped the clip region copy, resulting in the + port not being set on the window instead. + + Signed-off-by: Chris Wilson + +commit feae741b38445f323cc1ae08f290192c7033f0f0 +Author: Chris Wilson +Date: Tue Aug 27 18:57:54 2013 +0100 + + sna/video: Update sprite destination colorkey command + + The final version that was upstreamed differed from the original version + we implemented. The final version allows for both destination/source + colorkeying, but left the ddx out of date. + + Reported-by: Ville Syrjälä + Signed-off-by: Chris Wilson + +commit 6997c4c2bde319fdf73ead8a9c9965f6548545eb +Author: Chris Wilson +Date: Mon Aug 26 22:07:49 2013 +0100 + + sna: Promote no COWs assertion to a condition check before operating inplace + + We can arrive there with a COW and wanting to a CPU mapping, which is + unfortunate and requires the indirect path instead. + + Signed-off-by: Chris Wilson + +commit 3b267e52a0892ddb7b4a73e9b06555efe9e0b778 +Author: Chris Wilson +Date: Mon Aug 26 21:58:57 2013 +0100 + + sna: Fix ordering of assert vs the state it checks + + It helps to set the state we want to check before actually checking that + we set it! + + Signed-off-by: Chris Wilson + +commit e98cc0b1ce69a7ebc6b6ef4b916d05b9f73efe0b +Author: Chris Wilson +Date: Sun Aug 25 23:05:32 2013 +0100 + + sna: Make sure we assert our Master status before copying the fbcon + + Being able to read back the fbcon handle as a non-Master process is an + information leak that will be fixed. We should already be Master by + this point by virtue of the sequence in which we obtain the device fd. + However, to be pedagogically correct, call drmSetMaster() before the + fbcon copy. + + Signed-off-by: Chris Wilson + +commit f62173af1af84e398a92fbe5ae67aa3f20f67060 +Author: Chris Wilson +Date: Sun Aug 25 14:12:15 2013 +0100 + + sna/gen7: Combine a couple of pipe-flushes + + Reduce the number of pipe-controls we emit by combining one of the + frequent flushes with a stall. + + Signed-off-by: Chris Wilson + +commit c1dbbe69ada3323a82ebd672e9ef47a0d95911c9 +Author: Chris Wilson +Date: Sun Aug 25 11:26:46 2013 +0100 + + sna: Make SetScreenPixmap do as it says + + Make sna_set_screen_pixmap() a little more complete and remove the + assertion that the caller manages sna->front. This should make the + function easier to reuse. + + Signed-off-by: Chris Wilson + +commit 097c2567939f2063749acf0bc768df7bb002d535 +Author: Chris Wilson +Date: Sun Aug 25 10:49:57 2013 +0100 + + sna: Add a few more checks for a hosted Xserver before walking CRTC lists + + If we are hosted, we do not own the CRTC configuration, and deferencing + the private data structures believing them to be ours, only leads to + disaster. + + Based on patches by Christopher James Halse Rogers. + + Reported-by: Christopher James Halse Rogers + Signed-off-by: Chris Wilson + +commit d7e6e9b83ce029e81767de35124b84914ad7d54b +Author: Chris Wilson +Date: Sun Aug 25 00:55:19 2013 +0100 + + sna/dri: Prefer the source ring + + When copying from the DRI client onto the scanout, we return the source + buffer back to the client afterwards. Therefore if we force the source + to switch rings, we incur a double ring switch from the client to us and + back. If we force the dst to switch rings, it will likely be then + correct for all subsequent copies as well. + + Signed-off-by: Chris Wilson + +commit d4ca1953189d39741bcce659da0d6adcc548ab71 +Author: Chris Wilson +Date: Sat Aug 24 15:09:06 2013 +0100 + + sna: Fix reversed logic and loss of trust in the host + + The test for a hosted Xserver was backwards in + + commit 306c72cffbd8cd88e93871ee21fa85101198c1ac + Author: Chris Wilson + Date: Sat Aug 24 14:02:23 2013 +0100 + + sna: Trust the preferred-depth returned by the host + + so we failed to load the driver instead. + + Signed-off-by: Chris Wilson + +commit 3716345bf45bff785d0786774400eb47e1678caa +Author: Chris Wilson +Date: Sat Aug 24 14:04:51 2013 +0100 + + sna: Don't restrict the frontbuffer to be scanout capable if hosted + + Since we won't be binding it to a framebuffer, we don't care if it is + incompatible. + + Signed-off-by: Chris Wilson + +commit 306c72cffbd8cd88e93871ee21fa85101198c1ac +Author: Chris Wilson +Date: Sat Aug 24 14:02:23 2013 +0100 + + sna: Trust the preferred-depth returned by the host + + As we are not master and will not be binding the fb, it is irrelevant as + to whether our render buffer is actually bindable. + + Signed-off-by: Chris Wilson + +commit 7690346248fd8d3460cc07f018827ff55b85d19d +Author: Chris Wilson +Date: Sat Aug 24 14:00:34 2013 +0100 + + sna: Don't copy fbcon if hosted + + When hosted, we have no idea what the right initial contents should be + as we are independent of the CRTC and so the existing fb is irrelevant. + Plus, not actually being master will cause the attempt to read back the + bound framebuffer to fail... + + Signed-off-by: Chris Wilson + +commit 8b0d69e76c50155ea404f0e8a97d60a3f710c8a3 +Author: Chris Wilson +Date: Fri Aug 23 18:53:34 2013 +0100 + + intel: Add experimental rendernode support + + Render nodes allow clients full access to off-screen rendering and GPU + offload, without assuming any master responsiblities (for device and + display management). As they have a more limited interface, they can be + used in a more permissive manner. + + Signed-off-by: Chris Wilson + +commit 846436c1a26b2c8a9d787ec707edb075fac57ee0 +Author: Chris Wilson +Date: Fri Aug 23 16:25:08 2013 +0100 + + sna/dri: Make async blits async again + + Fixes the regression introduced in + commit 6f5fd772c7ca656b86394a0f036d4e0cf5b33d8e [2.21.13] + Author: Chris Wilson + Date: Thu Jul 25 08:29:55 2013 +0100 + + sna/dri: Discard the strict checking for stale bo before performing a blit + + which added the sync request flag along the explicit async blit path. + + Signed-off-by: Chris Wilson + +commit fc4e81726d03399bfbbba79d2e76556836f03bd2 +Author: Chris Wilson +Date: Fri Aug 23 02:25:34 2013 +0100 + + sna/video: Disable the existing sprite when switching CRTCs + + After starting a new video on another CRTC, disable the old one as we + currently only track the single video port. However, showing a video + split across multiple CRTCs would be a useful extension in the future. + + Signed-off-by: Chris Wilson + +commit 509e7aaf8446f568e133e1b450ea13f73e9b366b +Author: Chris Wilson +Date: Fri Aug 23 02:10:11 2013 +0100 + + sna/gen7: Prefer the render ring for more operations + + As we get more well-endowed GPUs with ever more execution units, it + becomes advantageous to do even basic copies through the render ring. + However, the extra performance comes at a cost - higher power usage. To + mitigate this, we apply a heuristic of only allowing a switch over to + the render ring if the render ring is already active with an early + request (in addition to the usual stall avoidance and general + performance heuristics). + + Signed-off-by: Chris Wilson + +commit f57ce6ef9ca735d5cb428b2f12f1f9413a70506a +Author: Chris Wilson +Date: Wed Aug 21 12:20:29 2013 +0100 + + 2.21.15 release + +commit ed40a7c3de3bbb178278c05907e59239712b98b6 +Author: Chris Wilson +Date: Sun Aug 18 14:33:44 2013 +0100 + + sna/gen6+: Tweak semaphore avoidance for composite operations + + Signed-off-by: Chris Wilson + +commit 4486ae2d829781e32652bce84c08e63ee1960bf0 +Author: Chris Wilson +Date: Sun Aug 18 10:11:49 2013 +0100 + + sna: Do not force use of the CPU bo if replacing a busy GPU bo + + To minimise waiting for the SHM pixmap afterwards. + + Signed-off-by: Chris Wilson + +commit f1cbf13bb1ad7432d681ef7cbbc17bcf2d23c554 +Author: Chris Wilson +Date: Sat Aug 17 23:37:57 2013 +0100 + + sna/video: Initialise the UV offsets to 0 for packed formats + + Signed-off-by: Chris Wilson + +commit db41bec0fd4dc8eec1f44a988f1c5a531594604f +Author: Chris Wilson +Date: Sat Aug 17 23:33:17 2013 +0100 + + sna/video: Return the planar offset calculations to the planar branch + + They where accidentally move the packed branch in + commit 85e89f2121bad96d34ff8df9456e2fbaa9ff7881 + Author: Chris Wilson + Date: Fri Aug 16 21:11:33 2013 +0100 + + sna/video: YUV420 is not supported by sprites, replace it with a RGB passthrough + + Signed-off-by: Chris Wilson + +commit fed9ca236a0b5bbd7f1d137aa4ef9c2caf26719c +Author: Chris Wilson +Date: Fri Aug 16 22:43:26 2013 +0100 + + sna/video: Turn off passthrough if given a zero name + + Signed-off-by: Chris Wilson + +commit 18e274425d728baa62445dc091cae6b1eab94a89 +Author: Chris Wilson +Date: Fri Aug 16 21:58:29 2013 +0100 + + sna: Make sure that external scanouts are immediately discarded + + An issue with passthrough Xv buffers is that they end up in the scanout + cache and potentially reused instead of being immediately discarded. + + Signed-off-by: Chris Wilson + +commit 6692077aca2dcb7754b23b6404ff2db2f70228dc +Author: Chris Wilson +Date: Fri Aug 16 21:55:16 2013 +0100 + + sna/video: Keep a ref to the passthrough overlay bo + + Otherwise we will destroy it at the end of the frame whilst it is still + meant to be shown. Not normally an issue as the next frame is show + before it vanishes, but is if the image is shown for an extended period + of time. + + Signed-off-by: Chris Wilson + +commit d8c9b2c85256c870f9677a590f190856826c821c +Author: Chris Wilson +Date: Fri Aug 16 21:47:25 2013 +0100 + + sna/video: Mark the sprite color key as changed when disabling + + Otherwise we will forgot to send the command to turn off the colorkey. + + Signed-off-by: Chris Wilson + +commit 85e89f2121bad96d34ff8df9456e2fbaa9ff7881 +Author: Chris Wilson +Date: Fri Aug 16 21:11:33 2013 +0100 + + sna/video: YUV420 is not supported by sprites, replace it with a RGB passthrough + + As YUV420 is not supported by any of the current sprite implementations + drop it. Instead implement some RGB passthroughs. + + Signed-off-by: Chris Wilson + +commit c610d37dae7e025027fd09a6889bf94853af8b8c +Author: Chris Wilson +Date: Fri Aug 16 18:22:45 2013 +0100 + + sna/video: Expose an attribute to keep the overlay always on top + + Signed-off-by: Chris Wilson + +commit 7a6bd55da90382459db072bffbd4aa36d18f9a17 +Author: Chris Wilson +Date: Fri Aug 16 15:38:18 2013 +0100 + + sna/video: Don't assert on a client error, return BadAlloc + + If the client sends a BO that is too small to satifsy the PutImage, then + reject with BadAlloc rather than die with an assert. + + Signed-off-by: Chris Wilson + +commit cb35a0b19a4a1c9ac4e2bb552a61057c215ce890 +Author: Chris Wilson +Date: Fri Aug 16 08:47:16 2013 +0100 + + uxa: Restore the lost copyright block after splitting i965_reg.h from i915_reg.h + + Reported-by: "Lim, Siew Hoon" + Signed-off-by: Chris Wilson + +commit 445f205a18f7548aa97b04379ff66a4fafb3f79c +Author: Chris Wilson +Date: Thu Aug 15 00:28:25 2013 +0100 + + sna: Clip the tiled copy during framebuffer resize + + If we use the BLT for copies, then we need to supply correctly clipped + coordinates. + + Signed-off-by: Chris Wilson + +commit 6bd897157b34e3b80dea68fa615d0fba08238486 +Author: Sedat Dilek +Date: Wed Aug 14 10:01:13 2013 +0200 + + Correct misspelled caching + + Signed-off-by: Sedat Dilek + +commit 5d29daa7df72d9a96e044d0706f3014811389629 +Author: Chris Wilson +Date: Wed Aug 14 18:16:22 2013 +0100 + + sna: Make sure the frontbuffer exists before doing pitch checks + + An unusual path to be sure, to call sna_crtc_set_mode_major before we + create a GPU bo for the scanout - but might be possible after a GPU + hang, or it appears after trying to set a 0x0 mode. At any rate, make + sure the GPU bo exists before dereferencing. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1212344 + Signed-off-by: Chris Wilson + +commit a0f90a4c79799780592c004c846a963aad5f28e6 +Author: Chris Wilson +Date: Wed Aug 14 18:12:15 2013 +0100 + + sna: Rename sna_pixmap_get_bo() + + Mark how dangerous this function is by giving it a __ prefix. + + Signed-off-by: Chris Wilson + +commit 2be9118e882f59591dc0fb9b98ec25494f020bb4 +Author: Chris Wilson +Date: Wed Aug 14 17:48:13 2013 +0100 + + sna: Tile the old image onto the new framebuffer when enlarging + + This improves the transition from going from a mirrored fbcon + framebuffer to an extended mode. + + Signed-off-by: Chris Wilson + +commit 394978867edf3746c285491db6be41abfe325d87 +Author: Chris Wilson +Date: Wed Aug 14 08:38:52 2013 +0100 + + sna: Check that we successfully install the required hosting midlayer + + Signed-off-by: Chris Wilson + +commit 3d818c0a36919add462c05d01a64b297f693fa69 +Author: Chris Wilson +Date: Wed Aug 14 08:34:46 2013 +0100 + + sna: unwrap old modesetting API whilst hosted + + If we are hosted, then we do not have our own modesetting backend and + calling it results in fireworks. So leave the old modesetting entry + points for the hosting midlayer to control. + + Signed-off-by: Chris Wilson + +commit 504b18b079e0a12a9d18b46418411805ef1d8377 +Author: Chris Wilson +Date: Tue Aug 13 11:01:03 2013 +0100 + + sna: Fix the assertions for the composite fb path + + Having updated the offsets for the dst, we also need to update the + assertions. + + Signed-off-by: Chris Wilson + +commit 5840bfe285e3fd9dc550cbe5fa87437870c92038 +Author: Julien Cristau +Date: Mon Aug 12 19:31:53 2013 +0200 + + Link the driver against pixman + +commit b2df6cc8f0bcac6311f2b1d0c008add9b7d05787 +Author: Julien Cristau +Date: Mon Aug 12 14:45:04 2013 +0200 + + configure: use CPPFLAGS for xaa.h check, not CFLAGS + + CFLAGS aren't passed to the preprocessor, which then can't find the + header. + + Signed-off-by: Julien Cristau + +commit d661332de946c356c10a75e29a48f2c2e3599fec +Author: Julien Cristau +Date: Mon Aug 12 14:38:22 2013 +0200 + + Check for struct sysinfo as well as + + Non-linux glibc systems have the latter but not the former. + + Signed-off-by: Julien Cristau + +commit 5775731b6489c63212914163f51b7a576df70658 +Author: Chris Wilson +Date: Mon Aug 12 22:24:47 2013 +0100 + + sna/glyphs: Do not attempt to release the negative cache lookup + + Following + + commit 021c59f6243c51871f664e5fdd43aa00a809033a + Author: Chris Wilson + Date: Sat Aug 10 13:15:48 2013 +0000 + + sna/glyphs: Micro-optimise glyph drawing + + we need to be careful during sna_glyph_release() that the atlas points + into the glyph cache before releasing it. Fortunately caught by an + assertion. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 8da8c88e999d74fb110dddd497f03854adc089cc +Author: Chris Wilson +Date: Mon Aug 12 13:12:21 2013 +0100 + + intel: Check for HW_SKIP_CONSOLE before use + + For the older xserver. + + Signed-off-by: Chris Wilson + +commit 4abc9c317b1f79f3f3d687fcf2d255b4d7416c2c +Author: Chris Wilson +Date: Mon Aug 12 13:10:05 2013 +0100 + + configure: Correct the spelling of XORG_TESTSET_CFLAGS + + Reported-by: Julien Cristau + Signed-off-by: Chris Wilson + +commit ce666270c8861e039a06718cc3e9093d63d15187 +Author: Chris Wilson +Date: Mon Aug 12 13:07:03 2013 +0100 + + sna: Fix use of obsolete this_atlas in a DBG message + + Signed-off-by: Chris Wilson + +commit b3cb8b209d0515c54e1126f8ed6adf3cf7fbf3bd +Author: Chris Wilson +Date: Mon Aug 12 13:05:00 2013 +0100 + + configure: Fix reversed check for XORG_TESTSET_CFLAG + + Signed-off-by: Chris Wilson + +commit 9645e71cb2580adb78bea1cfa70dfc3f66630834 +Author: Chris Wilson +Date: Mon Aug 12 11:28:03 2013 +0100 + + sna: Reorder composite fallback migration to handle src==dst || mask==dst + + Order is important when moving and marking damaged regions. + + Signed-off-by: Chris Wilson + +commit e8dfc5b3f4ffeec93e52a5319b5a3118edf0e94e +Author: Chris Wilson +Date: Mon Aug 12 10:33:41 2013 +0100 + + sna: Fix destination offset along memcpy composite fallback fastback + + The application of dst_x|y was incorrect, and so the drawing could end + up in the wrong location for a window. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=66990 + Signed-off-by: Chris Wilson + +commit 8d48a43ed956ff21d779aff1a11a0f7bf6b65bcb +Author: Chris Wilson +Date: Sun Aug 11 11:49:04 2013 +0100 + + sna/gen7: Refine ring selection + + Don't force us to select BLT too early if we allow ring switching. As + the RENDER ring benefits from more cacheing over time (e.g. HSW:GT3e) it + becomes much more preferable to use it over the BLT. Since we already + have the logic to decide if ring switching is possible/preferred, relax + the initial checks on where the current activity is to allow switching + between batches. + + Signed-off-by: Chris Wilson + +commit 6f3999f38c71689298ac44e5b64830f754199740 +Author: Chris Wilson +Date: Sat Aug 10 19:44:00 2013 +0100 + + sna: Avoid confusing conflicting CRTC probes vs a DRM race + + Only bail we fail to find the CRTC for this output amongst the allowed + set for this ZaphodHead - but allow us to find an invalid CRTC. + + Signed-off-by: Chris Wilson + +commit 6cd366b79ad15be608f829e884b4880c311cf58b +Author: Chris Wilson +Date: Sat Aug 10 17:55:07 2013 +0000 + + sna: Remove the redundant clearing of kgem at startup + + struct kgem is contained within a cleared superstruct. + + Signed-off-by: Chris Wilson + +commit b364305b16d79e32592235004872d38406ce8e9d +Author: Chris Wilson +Date: Sat Aug 10 13:41:46 2013 +0000 + + sna/glyphs: Micro-optimise glyphs-to-dst + + Signed-off-by: Chris Wilson + +commit 021c59f6243c51871f664e5fdd43aa00a809033a +Author: Chris Wilson +Date: Sat Aug 10 13:15:48 2013 +0000 + + sna/glyphs: Micro-optimise glyph drawing + + When you don't have many cycles to play with, every one counts. + + Here we make sure we cache negative lookups for large glyphs. + + Signed-off-by: Chris Wilson + +commit 4d5483c253a9a29f54f2eed9b40623c8e9de6c22 +Author: Chris Wilson +Date: Sat Aug 10 08:59:33 2013 +0100 + + sna: Tune pixmap_inplace() not to use a pinned busy GPU bo for replacement + + Obviously we can only replace the bo if it is not pinned and so just + incur a stall when we could have instead rerouted the rendering through + its CPU bo. + + Signed-off-by: Chris Wilson + +commit de379943b49b94cc065fd55ad7ca1067e1802a31 +Author: Chris Wilson +Date: Fri Aug 9 16:37:29 2013 +0100 + + sna: Allow LLC to reuse any active write buffer + + The inplace write distinction is not important on LLC, so pick any + buffer that is on the GPU and available for reuse. + + Signed-off-by: Chris Wilson + +commit 821b34f5db2936394e8969b15c1cdd5144acf6e3 +Author: Chris Wilson +Date: Fri Aug 9 14:55:09 2013 +0100 + + sna: Squelch a "valid" mode without a dotclock + + There is yet another race in drm initialisation where X is starting long + before the drm device is completely ready, and is being told that the + output has a valid mode, but with bogus settings. Ignore it, and hope it + comes to its senses later on. + + Signed-off-by: Chris Wilson + +commit b6b5c3f009585151eb772dfc2526843c7cee82b3 +Author: Chris Wilson +Date: Fri Aug 9 11:34:39 2013 +0100 + + intel: Disable incompatible features whilst hosted + + Start adding the infrastructure to disable direct hardware access if X + is being run under a system compositor (aka "hosted"). + + Signed-off-by: Chris Wilson + +commit ab445c23079a76eaa2a7d499ec4755599012bd2f +Author: Chris Wilson +Date: Fri Aug 9 10:39:22 2013 +0100 + + sna: Rewrite the can-mmap-cpu test to handle stolen unclaimed bo + + Signed-off-by: Chris Wilson + +commit f1d3d1f8c677b938362eee8b9f4e81f5463bc16a +Author: Chris Wilson +Date: Fri Aug 9 10:07:59 2013 +0100 + + sna: Check for EINVAL after mmapping + + I want to catch this error as it happens to see which (stolen) bo is + being erroneously mmapped. + + Signed-off-by: Chris Wilson + +commit 039a64e89e0323bd02eec24fba21a3924ee5cc31 +Author: Chris Wilson +Date: Fri Aug 9 09:13:10 2013 +0100 + + configure: Only use XORG_TESTSET_CFLAG if defined + + Repairs the build for f16 which has an older version of xorg-macros. + Fortunately, as it doesn't define XORG_TESTSET_CFLAG it also doesn't use + it generate noisy output. + + Signed-off-by: Chris Wilson + +commit 31b4110b5119ad1643f3e75c5e23a44c4ceb30fe +Author: Chris Wilson +Date: Thu Aug 8 22:25:57 2013 +0100 + + sna: Use create2 to allocate a DISPLAY bo even if we have not enough stolen + + Signed-off-by: Chris Wilson + +commit 0f82c1a451a2d5763d9cf53b48f55200f7716966 +Author: Chris Wilson +Date: Thu Aug 8 22:05:34 2013 +0100 + + sna: Always reuse scanout bo where possible + + When looking for an inactive scanout and all are busy, select the oldest + for reuse. + + Signed-off-by: Chris Wilson + +commit bd7e653e1ee009e225b0bbf60dcaebc9b0fa2788 +Author: Chris Wilson +Date: Thu Aug 8 22:03:16 2013 +0100 + + sna: Avoid leaking stolen framebuffer bo + + Framebuffers created from stolen bo were not being released and so the + kernel would keep the fb and bo alive, causing the memory to be + remain unreusable whilst X lived and us to leak all available stolen + memory. + + Signed-off-by: Chris Wilson + +commit 097669cd728e612bf3e3c531b83892e37481ee7b +Author: Chris Wilson +Date: Thu Aug 8 20:44:24 2013 +0100 + + sna/dri: Do not create a scanout-capable buffer if not flipping + + Avoid paying the penalty of creating an uncached buffer if we never + intend to flip to it. + + Signed-off-by: Chris Wilson + +commit cbf1f97d5dadbf569c7d26e78899bda95b28b16d +Author: Chris Wilson +Date: Thu Aug 8 19:43:24 2013 +0100 + + configure: Include the experimental features in the configuration summary + + Signed-off-by: Chris Wilson + +commit fcac4f7f2b8d06cf2451609739ea342e5e3bfd5a +Author: Chris Wilson +Date: Thu Aug 8 14:52:26 2013 +0100 + + sna: Only use the experimental create2 if we support DISPLAY cacheing as well + + Signed-off-by: Chris Wilson + +commit c6add09791a44d9b3af79d50f52e6913c46341a8 +Author: Raul Fernandes +Date: Thu Aug 8 09:26:59 2013 +0100 + + Micro-optimise box intersections + + We can shave a few instructions off the routine by incrementally + performing the "is-empty" check as soon as we compute the intersection + in each dimension. + +commit c01c66bca2c64ae2d77233b6ccdca26431ee51b8 +Author: Chris Wilson +Date: Wed Aug 7 10:35:04 2013 +0100 + + sna: Update experimental create2 struct definition + + Signed-off-by: Chris Wilson + +commit 6004870d53221caf05a330fcfc8a72e68b2b8898 +Author: Dave Airlie +Date: Tue Aug 6 13:03:18 2013 +1000 + + configure.ac: fix dri enabled with kms only picked + + Otherwise we'd fail saying DRI1 wasn't possible, when that + is exactly what we asked for. + + [ickle: The breakage was introduced with + + commit bd6ffd1ad2f903215d2c631252e742a0f6893054 [2.21.14] + Author: Chris Wilson + Date: Sat Jul 27 15:33:19 2013 +0100 + + configure: Print a summary of compilation options + + which modified the search to only take place if UMS was enabled, but + missed mollifying the resulting error.] + + Signed-off-by: Dave Airlie + +commit a875ba39bea4a951e8cf1450ba9722b7cda95943 +Author: Chris Wilson +Date: Mon Aug 5 16:15:48 2013 +0100 + + sna: Rename the attribute macro __packed__ to avoid clang barfing + + Using __packed__ as shorthand for ___attribute__(__packed__) confuses + clang as. (I guess to it expands (__packed__) which gcc skips.) As + clang also uses packed in its builtins, we have to find a compromise, + and so tightly_packed wins for being a more verbose description without + the dangerous leading underscores. + + Signed-off-by: Chris Wilson + +commit 2536ad044b259eb3ce3e7b1ccf2c59ab3fe37d06 +Author: Chris Wilson +Date: Sun Aug 4 12:50:41 2013 +0100 + + sna: Tweak threading thresholds + + Signed-off-by: Chris Wilson + +commit 2cdd57c804706bcf558d16d3370c1880ef482af1 +Author: Chris Wilson +Date: Sun Aug 4 11:43:54 2013 +0100 + + sna/trapezoids: Some minor DBG to investigate threaded rendering + + Signed-off-by: Chris Wilson + +commit 1f7e20d812ef46fa0cba492e06a8f9f5a326d3c5 +Author: Chris Wilson +Date: Sun Aug 4 12:26:36 2013 +0100 + + sna: Define fast function attribute for old gcc or other compilers + + Also written by Mark Kettenis and reported by Sedat Dilek. + Signed-off-by: Chris Wilson + +commit 0cd154039ab02799dc972d93c415e762226df1aa +Author: Chris Wilson +Date: Sun Aug 4 10:30:14 2013 +0100 + + 2.21.14 release + +commit a5bf389908934aa4f9493a4a35b18e4aec9c8103 +Author: Chris Wilson +Date: Sat Aug 3 14:54:31 2013 +0100 + + sna: Mark the entire userptr proxy chain as flush/non-reusable + + Fixes cache bookkeepping when mixing userptr uploads. + + Signed-off-by: Chris Wilson + +commit 5287660aafe45859c07874c22dca99c1ff5e555a +Author: Chris Wilson +Date: Fri Aug 2 13:18:12 2013 +0100 + + sna: Reserve relocation entries for the deferred VBO + + Whilst we reserved exec entry slots for the deferred VBO, there were no + relocation spaces reserved. So if we submitted a render command followed + by a multitude of BLT copies, we could then overrun the relocation array + when adding the deferred vbo to the batch. + + Reported-by: Danny + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67504 + Signed-off-by: Chris Wilson + +commit 3f04b6f33f05f8a24698f934a23462269b84917d +Author: Chris Wilson +Date: Thu Aug 1 14:49:36 2013 +0100 + + sna/dri: Disable TripleBuffering by default for compositors + + Ideally, the method of swapping is something that the applications have + control over, along with how to synchronise to the vertical refresh. + Whilst triple buffering is good to reduce jitter for games (at the cost of + an extra frame of latency, usually considered a good tradeoff), it + prevents the applications from accurately controlling the presentation + of animations. One vocal critique is Owen Taylor, who demands accurate + swap control for smooth animations in gnome-shell. For example, + + http://blog.fishsoup.net/2012/11/28/avoiding-jitter-in-composited-frame-display/ + + In lieu of application control, just apply a quirk for the compositor. + Everyone else will just have to wait for DRI3. + + Signed-off-by: Chris Wilson + +commit 0ae07158c3550b418d3596cacda33a64ee653790 +Author: Chris Wilson +Date: Thu Aug 1 11:01:14 2013 +0100 + + sna: Add a few more details to the log for mode switching + + Signed-off-by: Chris Wilson + +commit 246911d742569eed6675698c1e51032ba50917d3 +Author: Chris Wilson +Date: Thu Aug 1 10:52:44 2013 +0100 + + sna: Don't force inline string-ops for the general memcpy_blt routine + + As we need optimal copy code for the general case, where unlike + swizzling the run lengths are not known before hand, we need to call the + arch specific routines from glibc. + + Signed-off-by: Chris Wilson + +commit 8174c56c3ad6f1b0e6cd432c888f3eaca91159b4 +Author: Chris Wilson +Date: Thu Aug 1 09:19:17 2013 +0100 + + sna/glyphs: Allow glyphs-to-dst to discard CA masks for a8 glyphs + + Signed-off-by: Chris Wilson + +commit c5e3b66c27e8960a39ba0fc9108e04a67e1c2d98 +Author: Damien Lespiau +Date: Wed Jul 31 18:50:51 2013 +0100 + + uxa/display: Keep the EDID blob around for the lifetime of an output + + xf86InterpretEDID() doesn't copy the EDID raw data in xf86MonPtr but + just stores the given pointer. The DDX driver needs to make sure that + data stays valid. + + Signed-off-by: Damien Lespiau + +commit 278ee155d572d3132d27823bb69995a8cc61c2c0 +Author: Chris Wilson +Date: Wed Jul 31 17:01:47 2013 +0100 + + sna: Relax readback constraint for CPU mappings of scanouts + + Signed-off-by: Chris Wilson + +commit bfe25b8110fc4d4761b57e3ec07b8467890b90a1 +Author: Chris Wilson +Date: Wed Jul 31 11:00:21 2013 +0100 + + sna: Fix interaction between WT mapping of scanouts and allocating from stolen + + If we allocate the scanout from stolen, we cannot then access it via the + CPU - so prevent the mapping in those cases. + + Signed-off-by: Chris Wilson + +commit 493763301e995d02cb838d14348da46dd26444af +Author: Chris Wilson +Date: Tue Jul 30 17:38:23 2013 +0100 + + sna: Allow CPU access to scanouts if WT cached + + On Iris, we may store the framebuffer in the eLLC/LLC and mark it as + being Write-Through cached. This means that we can treat it as being + cached for read accesses (either by the GPU or CPU), but must be careful + to still not write directly to the scanout with the CPU (only the GPU + writes are cached and coherent with the display). + + Signed-off-by: Chris Wilson + +commit cdbc097796b24ab42b60c49d9885a35573c96a89 +Author: Chris Wilson +Date: Tue Jul 30 16:42:54 2013 +0100 + + sna/gen7: Set appropriate constants for Haswell GT3 + + GT3 has twice the number of cores and URB as GT2, and so we can use + more threads and URB entries. + + Signed-off-by: Chris Wilson + +commit 9a390c77dc83909c9a05161d91678a87dd6a0d34 +Author: Chris Wilson +Date: Tue Jul 30 14:07:45 2013 +0100 + + sna/gen4: Hide an unused function + + Whilst we are force flushing vertexes we are not using the threaded + emitter, so simply hide it from the compiler to prevent it warning about + the unused function. + + Signed-off-by: Chris Wilson + +commit a3eea6e61e15a147165400c81eab82a14a9ce2fe +Author: Chris Wilson +Date: Tue Jul 30 13:22:54 2013 +0100 + + Suppress misleading warnings for -Wmaybe-uninitialized + + All the curent reports by gcc are false positives. Instead we have better + static analysis tools at our disposal and valgrind. + + Signed-off-by: Chris Wilson + +commit 208282d31657f2b718e151397d16b307cdf8f77b +Author: Chris Wilson +Date: Tue Jul 30 13:19:27 2013 +0100 + + Suppress a bunch of compiler warnings for using constant strings + + We want these allocated in ro memory even if the antique API complains. + + Signed-off-by: Chris Wilson + +commit 7e3445a330340c1aa2ca5a13d838344438336749 +Author: Chris Wilson +Date: Tue Jul 30 11:17:52 2013 +0100 + + sna/dri: Tidy up applying damage to the Pixmap when copying regions + + Now that we are doing a true move-to-gpu first, we can drop the hacks + from damage(). + + Signed-off-by: Chris Wilson + +commit c507f621c932393a8b87912f71a86e29a8c1c190 +Author: Chris Wilson +Date: Mon Jul 29 23:54:31 2013 +0100 + + sna: Suppress a few harmless warnings + + Mostly of the only used in debugging path variety. + + Signed-off-by: Chris Wilson + +commit cf7d36455fc43e88697f4fb8fd865f3259ba0d1a +Author: Chris Wilson +Date: Mon Jul 29 23:49:08 2013 +0100 + + intel: Suppress some extremely noisy warnings + + Warning about redundant declarations within the xorg headers hides + genuine warnings in our own code - disable them until the headers are + cleaned up. + + Signed-off-by: Chris Wilson + +commit d7465ece29c9ae665a5a9f5bdac764a19062786e +Author: Chris Wilson +Date: Mon Jul 29 21:55:29 2013 +0100 + + sna: Cleanup along all error paths in sna_pre_init() + + Only one out of a dozen error paths actually freed the locally allocated + memory, oops. + + Signed-off-by: Chris Wilson + +commit 5751b9f1f5beb943db8cb5d260379ae39eb18db4 +Author: Chris Wilson +Date: Mon Jul 29 14:44:51 2013 +0100 + + sna/dri: Prevent stale DRI buffers from a NULL dereference + + If the DRI buffer is stale, the drawable may have been recreated and no + longer be associated with DRI. In this case, the pixmap may not be on + the GPU, so just subsitute the client's old bo and hope the it catches + up and does a GetBuffers in the near future. + + Signed-off-by: Chris Wilson + +commit 8619db7224f5c3ec417a1d00a68e981549366adc +Author: Egbert Eich +Date: Mon Jul 29 13:52:54 2013 +0200 + + Add support for the dell backlight interface + + Signed-off-by: Egbert Eich + [ickle: Add the failsafe to sna as well.] + +commit c9d89499806779cd6c62d5d6d34df76279cc5abd +Author: Chris Wilson +Date: Mon Jul 29 11:51:39 2013 +0100 + + sna: Composite region is already in dst drawable space + + So do not offset it again when processing the fallback composite + operation. + + Regression from commit 6921abd81017c9ed7f3b2413784068fbc609a0ea + Author: Chris Wilson + Date: Thu Jul 18 16:21:27 2013 +0100 + + sna: Add a fast path for the most common fallback for CPU-CPU blits + + References: https://bugs.freedesktop.org/show_bug.cgi?id=66990 + Signed-off-by: Chris Wilson + +commit 3cb75950a90c28690f78fd3bf93ff8e23e5d543a +Author: Chris Wilson +Date: Mon Jul 29 11:03:43 2013 +0100 + + uxa: Fix incorrect include path + + Signed-off-by: Chris Wilson + +commit 1dd79c225cedf5614a77e5db9f9d9700bf957bb8 +Author: Chris Wilson +Date: Wed Jul 24 14:06:05 2013 +0100 + + sna: Restore driver info upon FreeScreen + + Signed-off-by: Chris Wilson + +commit b0826907dd7844c03080421d79e5f927b1245833 +Author: Chris Wilson +Date: Sun Jul 28 18:32:47 2013 +0100 + + sna: Fix limit on stipples to only use immediate operands for <= 32 dwords + + The check was still based on bytes after the len had been converted to + dwords. + + Signed-off-by: Chris Wilson + +commit 5e9decc963e01d6e558355af97314c502e314000 +Author: Chris Wilson +Date: Sun Jul 28 16:42:14 2013 +0100 + + uxa: Add the missing include to silence the compiler warning + + Silence compiler warning for no prior declaration of intel_init_scrn(). + + Signed-off-by: Chris Wilson + +commit f97b55d283e2fc333e93c88b18d5f3412f87c67b +Author: Chris Wilson +Date: Sun Jul 28 16:31:57 2013 +0100 + + intel: Remove the unused SDV PCI IDs + + As a first step towards working out what to do with the remaining + used-once PCI IDs, delete the used-never ones. + + Signed-off-by: Chris Wilson + +commit 679416f9a5e949e6f15a5e8712921731a1750cbd +Author: Chris Wilson +Date: Sun Jul 28 15:45:29 2013 +0100 + + sna: Allow PutImage to utilise userptr for busy targets + + Typically, PutImage is not a performance critical path since ShmPutImage + uses CopyArea and so PutImage is relegated to small one off transfers. + + Signed-off-by: Chris Wilson + +commit bd6ffd1ad2f903215d2c631252e742a0f6893054 +Author: Chris Wilson +Date: Sat Jul 27 15:33:19 2013 +0100 + + configure: Print a summary of compilation options + + Signed-off-by: Chris Wilson + +commit d92b5ddcff03a593270d060187b56ee2aa8e09b3 +Author: Chris Wilson +Date: Sun Jul 28 12:10:23 2013 +0100 + + sna/gen7: Prefer GPU spans for Baytrail as well + + Signed-off-by: Chris Wilson + +commit 0b68f1741fe360b0ba10421866aed8fffeea44e7 +Author: Chris Wilson +Date: Sun Jul 28 12:09:49 2013 +0100 + + sna/gen7: Use ivb/byt/hsw shorthand for generation checking + + Signed-off-by: Chris Wilson + +commit 0e2a1c27b7d7cd5b305fb092a27ef57ba266aebd +Author: Chris Wilson +Date: Fri Jul 26 15:38:20 2013 +0100 + + sna/gen7: Rename Valleyview to Baytrail + + The codename changed midcycle - along more rational lines (all the chips + within the platform are now part of the Baytrail family rather than + different codenames for each). + + Signed-off-by: Chris Wilson + +commit 8d10c32d650df36019d55cfc2e31d7641be4032d +Author: Chris Wilson +Date: Fri Jul 26 15:37:24 2013 +0100 + + sna/gen7: Set appropriate thread counts for Valleyview^Baytrail + + Signed-off-by: Chris Wilson + +commit a84a9fcb5e1218f685e4469dbe00f8f29cc36bf5 +Author: Chris Wilson +Date: Fri Jul 26 10:41:00 2013 +0100 + + intel: Remove the unused bridge PCI-IDs + + Signed-off-by: Chris Wilson + +commit 8afb5438f3479df39752cbda680c13d80f81f42f +Author: Chris Wilson +Date: Fri Jul 26 10:25:36 2013 +0100 + + intel: Always define the PCI-IDs + + If the macros conflict with another definition on the system, that is + actually a useful warning in this case as it means there exists a typo + somewhere. + + Signed-off-by: Chris Wilson + +commit a12c352b56e742b8f8aca4d8ca9efa26f268817b +Author: Chris Wilson +Date: Fri Jul 26 10:14:11 2013 +0100 + + intel: Remove some unused macros + + Signed-off-by: Chris Wilson + +commit e94f66c951ae9e0d4304cf8005537a147bda5d79 +Author: Chris Wilson +Date: Fri Jul 26 10:07:23 2013 +0100 + + intel: Move some backend specific macros out of the common header + + All the IS_GEN/IS_DEVICE are only used by the UXA backend, so move them + to its headers. + + Signed-off-by: Chris Wilson + +commit 04d5c33b9677fc920ad58522f93d832a42de4744 +Author: Chris Wilson +Date: Fri Jul 26 10:19:43 2013 +0100 + + uxa: Colocate architecture source files with backend implementation sources + + i.e. move the toplevel uxa/*.[ch] into src/uxa/*.[ch] + + Signed-off-by: Chris Wilson + +commit 45d4e8dcf9aee37015b1ee026997ed4dabdf112e +Author: Chris Wilson +Date: Fri Jul 26 09:35:06 2013 +0100 + + uxa: Clear up the common intel directory + + Move all the UXA backend specifc files into their own subdirectory. + + Signed-off-by: Chris Wilson + +commit ab28526ea43728fb675448515e1519a970fb5f56 +Author: Chris Wilson +Date: Thu Jul 25 21:55:21 2013 +0100 + + intel: Only print the unique chipset names + + When printing out the list of supported chipsets, remove the (many + times) repeated names as they are very confusing and obscure the product + name you may be searching for. + + Signed-off-by: Chris Wilson + +commit 6fd37e644d9c662776aff14cd51a27b7e52472de +Author: Chris Wilson +Date: Thu Jul 25 22:10:43 2013 +0100 + + intel: Replace the codename in the user facing string for unknown Haswell parts + + For these parts we do not yet known the correct marketing name, so + replace our use of the codename with the generic term. + + Signed-off-by: Chris Wilson + +commit 7567c99ee93f560cde33842cffa26a1ad6677600 +Author: Chris Wilson +Date: Thu Jul 25 21:40:02 2013 +0100 + + intel: Set the correct marketing names for Ironlake, Sandybridge and Ivybridge + + Signed-off-by: Chris Wilson + +commit 17873be335aea223e93170c9ba6819ab6877b86b +Author: Chris Wilson +Date: Thu Jul 25 21:37:05 2013 +0100 + + intel: Remove the SDV from the list of identified chipsets + + These devices are not for retail and so have no marketing names. + + Signed-off-by: Chris Wilson + +commit 4c6871684b0006a89be6760db99fda9b47790226 +Author: Chris Wilson +Date: Thu Jul 25 23:19:02 2013 +0100 + + intel: Cross-check an unnamed chipset against the list of known PCI-IDs + + If we recognise the PCI-ID but do not have a marketing name for it, it + means we are deliberating ignoring it - presumably because it is an + engineering sample. In this case, we do not want to print out a warning + into the logfile so replace the "Unknown chipset" with some info + about the future product. + + Signed-off-by: Chris Wilson + +commit b6bcb7ae20b92e48b8a2fa096c0e33b6b97b1b30 +Author: Chris Wilson +Date: Thu Jul 25 21:22:25 2013 +0100 + + intel: Source our PCI IDs table from the copy in the kernel + + Rather than duplicating the information we already use in the kernel, we + can reuse the pci-id tables so long as we apply a little fuzz. + + Signed-off-by: Chris Wilson + +commit bb8484da487008df8b69beb8086167bc272e85bb +Author: Chris Wilson +Date: Sat Jul 27 16:28:22 2013 +0100 + + 2.21.13 release + +commit 95e172b365365e9189dd863f1033bc6ea036a713 +Author: Chris Wilson +Date: Sun Jul 28 12:25:16 2013 +0100 + + sna/dri: correct DBG typo + + Signed-off-by: Chris Wilson + +commit c51cb32b6edbfc9b95cbb5e72a13ac42fdc745ed +Author: Chris Wilson +Date: Sat Jul 27 16:28:45 2013 +0100 + + test/dri2: We do not require the GLX includes + + Drop the GLX includes as they are not needed and obviously break if the + GLX are not present on the system (and we fail to check during + configure). + + Signed-off-by: Chris Wilson + +commit b4dbdd28ae05839645912f8aeb5100f6d05f11a1 +Author: Chris Wilson +Date: Fri Jul 26 15:49:00 2013 +0100 + + sna: Try the indirect upload if we elect to use a mmap and it fails + + This allows us to avoid the occassional kernel bug if mmap() fails and + the upload is possible via our indirect upload paths. + + Signed-off-by: Chris Wilson + +commit 6f5fd772c7ca656b86394a0f036d4e0cf5b33d8e +Author: Chris Wilson +Date: Thu Jul 25 08:29:55 2013 +0100 + + sna/dri: Discard the strict checking for stale bo before performing a blit + + Instead of checking that the DRI2Buffers match up with the current + DRI2Drawable, clip the area that is being copied to the minimum extents + of the Drawable, source and destination buffers. This ensures that we + never read nor write beyond the extents of the allocated or visible + regions. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67210 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67305 + Signed-off-by: Chris Wilson + +commit ef2a45731ef55b9fbafe5da67e0251b9b871bda9 +Author: Chris Wilson +Date: Wed Jul 24 19:44:15 2013 +0100 + + sna/dri: Restore the comparison of bottom-right extents to the pixmap origin + + This reverts a portion of commit 6d80bd6a73 so that we do not compare an + offset redirected window against its outer frame (e.g. glxgears in a + 300x300 under unity sits within a much larger ~330x330 frame). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=67210 + Reported-by: Joseph Yasi + Signed-off-by: Chris Wilson + +commit 42862298bc4d8588433abc8ac3b1ff65ec20e30d +Author: Chris Wilson +Date: Wed Jul 24 10:15:09 2013 +0100 + + sna: Remove bogus comment concerning sna_enter_vt + + This bogus comment confused both Chris Halse Rogers and myself. + + Suggested-by: Christopher James Halse Rogers + Signed-off-by: Chris Wilson + +commit 6d80bd6a7311926f258cd92f0b22e8d03022b62b +Author: Chris Wilson +Date: Wed Jul 24 09:03:45 2013 +0100 + + sna/dri: Cleanup validation of blit extents + + Prompted by a suggestion by Haihao, clarify the intent behind checking + the incoming maximum blit extents against the recorded sizes of the + attached bo. Due to the asynchronous nature of DRI2 invalidation, it is + possible for the DRI2 buffer to be stale and for its bo to be smaller + than required for the client's blit. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=67210 + Signed-off-by: Chris Wilson + Cc: haihao + +commit 74dd10d252df2d826b6db5da7e53bd7c5d76dec0 +Author: Chris Wilson +Date: Tue Jul 23 09:37:15 2013 +0100 + + sna/gen5: The cached value of the pipelined pointers key requires 32-bits + + Storing only the low 16-bits of the key for the pipelined state meant + that we forced an update with every new drawing op - with the side + effect of flushing the render cache. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67157 + Signed-off-by: Chris Wilson + +commit a8c7834e1d4d31097d0dd2c931d7662b5314a9b2 +Author: Chris Wilson +Date: Mon Jul 22 22:03:17 2013 +0100 + + configure: Supply a default value for dridriverdir + + Rather than fail to load DRI2 if not found. + + Signed-off-by: Chris Wilson + +commit 8d94f030c6af64f82d495a835a3b962480c068e7 +Author: Chris Wilson +Date: Mon Jul 22 22:01:22 2013 +0100 + + configure: Fix enabling of DRI2 + + After setting it to false, we then need to set DRI2 to true after we + detect the headers. + + Signed-off-by: Chris Wilson + +commit 0498e0c38d0b04d89020e61c13b250150ec19c3a +Author: Chris Wilson +Date: Mon Jul 22 19:20:16 2013 +0100 + + sna: Fix DBG compilation + + Signed-off-by: Chris Wilson + +commit e8cd5b5ff6f6e78260fb57f4b8171682d857e880 +Author: Chris Wilson +Date: Mon Jul 22 18:47:36 2013 +0100 + + configure: Use --enable-dri to control both DRI/DRI2 enabling + + Signed-off-by: Chris Wilson + +commit 3e2a1be13914e9ba13aaca06576a4f0e0f6e8fb0 +Author: Chris Wilson +Date: Mon Jul 22 19:34:32 2013 +0100 + + sna: Bail if we fail to find the attached CRTC during probing + + In a Zaphod configuration, the set of CRTCs available for an output is + limited, and if that set does not match with the already established + linkage, our quick probe function will select no mode. However, since + the output is already on, the user definitely would like to continue + using it, so fallback to InitialConfiguratio to select an appropriate + mode. + + Reported-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67176 + Signed-off-by: Chris Wilson + +commit 7b1a5024df96070bab70744ad7e7d78a41fb0f72 +Author: Chris Wilson +Date: Mon Jul 22 10:51:05 2013 +0100 + + sna/gen5: Rework the flush after blend state changes + + QA complained that the full flush to memory was too much of a + performance hit, so let's try a lighter weight non-stalling pipe flush + without. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=67157 + Signed-off-by: Chris Wilson + +commit 2737aaab77cc6233826077b90d001fe45efc376c +Author: Chris Wilson +Date: Sun Jul 21 20:42:37 2013 +0100 + + sna: Missing git add to fix typo in assert() from last commit + + I915_TILING != I915_TILING_Y + + Signed-off-by: Chris Wilson + +commit fa961ec99a67266687a1934eea24138cf2f7ad19 +Author: Chris Wilson +Date: Sun Jul 21 18:00:22 2013 +0100 + + sna: Allow linear inplace uploads along the tiled X PutImage blt paths + + Mostly for symmetry with GetImage, this in theory just bypasses a lot of + intermedate state checking. + + Signed-off-by: Chris Wilson + +commit ff705331da62729e302fb882755a88d756d9c233 +Author: Chris Wilson +Date: Sun Jul 21 09:47:35 2013 +0100 + + sna: Unwind BLT setup if we don't emit any ops + + Often we may find that the BLT operations we wish to do after a + XY_BLT_SETUP are either completely clipped out or transparent and so do + not generate any subsequent commands. This leaves us with many unused + XY_SETUP_BLT. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=61477 + Signed-off-by: Chris Wilson + +commit 2c78403cb56841f342692b97bb53e995c3ff6b9f +Author: Chris Wilson +Date: Sat Jul 20 21:55:16 2013 +0100 + + sna: Remember to apply drawable offsets for composite memcpy + + Yet another missing chunk from + commit 6921abd81017c9ed7f3b2413784068fbc609a0ea + Author: Chris Wilson + Date: Thu Jul 18 16:21:27 2013 +0100 + + sna: Add a fast path for the most common fallback for CPU-CPU blits + + I had the composite offsets, but not the normal window offsets! + + Reported-by: F.Brown + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67124 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67064 + Signed-off-by: Chris Wilson + +commit e9823ec2a9f81b2e1c78eb91b695847535b0d0af +Author: Chris Wilson +Date: Sat Jul 20 20:54:58 2013 +0100 + + sna: Release cloned pixmap when updating tearfree scanout + + Signed-off-by: Chris Wilson + +commit b27b1654145c62493614dd7545dcd9fe6936750e +Author: Chris Wilson +Date: Sat Jul 20 20:04:00 2013 +0100 + + sna: Relax assertion that CPU syncs are performed on reffed objects + + Along some paths, we use a CPU mapping on a temporary object that never + gets a user ref - so the assertion is bogus. A lesson I keep forgetting. + + Signed-off-by: Chris Wilson + +commit f39d9ed0929f83e65dde8da8f03fae6ba8264e4a +Author: Chris Wilson +Date: Sat Jul 20 18:08:22 2013 +0100 + + sna: Correct typo in checking src extents before performing memcpy + + A regression in + commit 6921abd81017c9ed7f3b2413784068fbc609a0ea + Author: Chris Wilson + Date: Thu Jul 18 16:21:27 2013 +0100 + + sna: Add a fast path for the most common fallback for CPU-CPU blits + + And add the full set of assertions to validate the memcpy. + + Signed-off-by: Chris Wilson + +commit f915d4a224eb686ad18b62ca0258e056b4a483cc +Author: Chris Wilson +Date: Sat Jul 20 15:26:04 2013 +0100 + + sna: Inform the upper layers that we turn the CRTC on after a modeset + + Signed-off-by: Chris Wilson + +commit 3f52a89046999c02ed778777eff8e2eb62662d90 +Author: Chris Wilson +Date: Sat Jul 20 12:16:23 2013 +0100 + + sna: Fix application of composite offsets along PutImage fallback path + + Signed-off-by: Chris Wilson + +commit a998a8a34961ccdcec14369486ae3332009a1276 +Author: Chris Wilson +Date: Sat Jul 20 02:01:25 2013 +0100 + + sna: Tidy fast source clip processing for sna_do_copy + + Signed-off-by: Chris Wilson + +commit 65a09436e6aef9fe0518e322f92e601d5d3f46c1 +Author: Chris Wilson +Date: Sat Jul 20 00:20:09 2013 +0100 + + sna/dri: Fix the strict blitting check not to assume the dst is the front buffer + + In order to allow the case for copying onto a target other than the + front buffer, such as the fake front buffer for example. + + Signed-off-by: Chris Wilson + +commit e386ba86ea487a2db62d80a0e60f176e052d6406 +Author: Chris Wilson +Date: Fri Jul 19 15:22:08 2013 +0100 + + sna: Perform an explicit check against the region extents + + RegionNotEmpty() is only valid if we only use the Region API, and as we + mix direct operations on the region extents, we need to also do our own + final check. + + Signed-off-by: Chris Wilson + +commit de472d95affcad0f87685782d29a41fa2a0cada6 +Author: Chris Wilson +Date: Fri Jul 19 15:13:50 2013 +0100 + + sna: Check for bpp>=8 before attempting to use memcpy_blt fastpath + + Fixes regression in + commit 6921abd81017c9ed7f3b2413784068fbc609a0ea + Author: Chris Wilson + Date: Thu Jul 18 16:21:27 2013 +0100 + + sna: Add a fast path for the most common fallback for CPU-CPU blits + + Signed-off-by: Chris Wilson + +commit 4aa0288f16f03723a7aaa30967809d10fdb15a27 +Author: Chris Wilson +Date: Fri Jul 19 14:10:02 2013 +0100 + + sna: Return true from get_drawable_deltas() if the pixmap is offset + + Signed-off-by: Chris Wilson + +commit 6921abd81017c9ed7f3b2413784068fbc609a0ea +Author: Chris Wilson +Date: Thu Jul 18 16:21:27 2013 +0100 + + sna: Add a fast path for the most common fallback for CPU-CPU blits + + This path will mostly be upload for individual glyph uploads, for which + the malloc overhead is significant. + + Signed-off-by: Chris Wilson + +commit 4da830864983ffe482388e4e4cfee02d106c895e +Author: Chris Wilson +Date: Thu Jul 18 15:05:04 2013 +0100 + + sna: Remove the duplicated pimxap migration for the composite fb path + + Signed-off-by: Chris Wilson + +commit 0d56f0eb84cc80fa5497c06a7967650aa20ebe51 +Author: Chris Wilson +Date: Thu Jul 18 14:49:41 2013 +0100 + + sna: DBG controls to turn off unwinding partial bo + + Signed-off-by: Chris Wilson + +commit 494f4bdcb00dc54f84e503b49fd85c8965f7f9ed +Author: Chris Wilson +Date: Thu Jul 18 14:19:16 2013 +0100 + + sna: Allow operation inplace when wedged + + There are times, such as rendering into the scanout, where continuing to + use the GTT is preferrable even when wedged. + + Signed-off-by: Chris Wilson + +commit fb058de4e617d7e5058674859993ec635a8d779e +Author: Chris Wilson +Date: Thu Jul 18 13:37:12 2013 +0100 + + sna: Treat a source with a CPU bo as being attached. + + Signed-off-by: Chris Wilson + +commit 4723a730f4dc2d007577f43fe232c49b305c2695 +Author: Chris Wilson +Date: Thu Jul 18 13:26:36 2013 +0100 + + sna: Discard overwritten operations before doing a BLT composite + + Signed-off-by: Chris Wilson + +commit b2f32373815e166fc6dceb477139ff2ef27db0ba +Author: Chris Wilson +Date: Thu Jul 18 12:33:10 2013 +0100 + + sna: Tidy a few DBG regarding cached uploads + + Signed-off-by: Chris Wilson + +commit 1b37a167d9caa7868427cb88b2480f3b64e96cc9 +Author: Chris Wilson +Date: Thu Jul 18 10:51:42 2013 +0100 + + sna: Only IGNORE_CPU for blt composite operations if the size is known + + Some operations we do not know the true extents and so check the whole + drawable when considering placement. In this case, the drawing may only + partially cover the drawable and so we can not simply ignore existing CPU + damage. + + Signed-off-by: Chris Wilson + +commit 2d62f7c483a999c24c744c0d257c8524f6fd5d32 +Author: Chris Wilson +Date: Thu Jul 18 22:00:24 2013 +0100 + + sna: Also do exposure checking after source clipping in sna_do_copy + + Hopefully a final regression from: + + commit 07926bfe507071a3d46a2ec13bb86a36bc225761 + Author: Chris Wilson + Date: Thu Jul 11 15:28:55 2013 +0100 + + sna: Remove the temporary region allocation from sna_do_copy + + References: https://bugs.freedesktop.org/show_bug.cgi?id=67055 + Signed-off-by: Chris Wilson + +commit 2c8c4626908987e1bb5b16c49bc16dabac7d89dc +Author: Chris Wilson +Date: Fri Jul 19 11:55:09 2013 +0100 + + sna/dri: Return early is the DRI2CopyRegion is not attached to the GPU + + This can happen if the DRI client passes in a stale DRI2Drawable - that + is the Drawable now references a new Pixmap which the client has not run + DRI2GetBuffers against. + + Signed-off-by: Chris Wilson + +commit e5036fb15983a1d3547eaab381c18b3edf4310b4 +Author: Chris Wilson +Date: Fri Jul 19 11:51:40 2013 +0100 + + sna/dri: Reject invalid DRI2Drawables if STRICT_BLIT is defined + + Simply reject any attempts to copy using stale references (i.e. the + DRI2Drawable has changed structure but the client hasn't yet noticed). + + Signed-off-by: Chris Wilson + +commit a45714c9a5ba5cd35fbbee2a49f540fe9164cdfd +Author: Chris Wilson +Date: Fri Jul 19 11:21:28 2013 +0100 + + sna/dri: Rearrange some more DBG to come before its assertion + + Again, useful to know what the assertion fails with. + + Signed-off-by: Chris Wilson + +commit e9831b50b58c36af3d2dd196b3abbfaa8e9a22c6 +Author: Chris Wilson +Date: Fri Jul 19 10:59:03 2013 +0100 + + sna/dri: Expose the refcnts in DBG before we hit the assertions + + Useful to try and explain some failures. + + Signed-off-by: Chris Wilson + +commit 6c8b15d321044d4a81cb187cc5e1ac094eb82367 +Author: Chris Wilson +Date: Wed Jul 17 20:58:33 2013 +0100 + + sna: Wrap cpuid.h + + More our ifdef out of line from the main code into a header file, where + we can also apply a little bit of synatic sugar. + + Signed-off-by: Chris Wilson + +commit 08cacc265da8c1213d8bf1107168e37d38a3641d +Author: Chris Wilson +Date: Wed Jul 17 14:22:16 2013 +0100 + + sna: Guard cpuid for use only with gcc-4.4 and later + + Since __cpuid_count() was only introduced into gcc-4.4, we obviously + cannot use it with earlier versions or with compilers that do not + provide compatible interfaces. + + Signed-off-by: Chris Wilson + +commit aa5f14b3400614531aa88eb6b70b64bd1f47974d +Author: Chris Wilson +Date: Wed Jul 17 14:12:29 2013 +0100 + + sna: Ensure that buffer_size is a power-of-two for use in ALIGN + + ALIGN() expects it alignment argument to be a power of two. As buffer + size depended upon cache_size, which is not always a power of two, + issues could arise with unexpected buffer sizes. + + Signed-off-by: Chris Wilson + +commit a764a6e69b23f644957cf3e4e98868464f458758 +Author: Chris Wilson +Date: Wed Jul 17 10:51:56 2013 +0100 + + sna: Fix typo in computing box intersection + + Comparing y2 against y1 for the intersection was a silly typo, + especially as the routine for computing the intersection already + existed. + + Fixes regression in commit 34c9b759fbab8d548108e954d55de38c6f5bec31 + Author: Chris Wilson + Date: Tue Jul 16 19:39:37 2013 +0100 + + sna: Note that borderClip region may be more than a singular box + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66991 + Signed-off-by: Chris Wilson + +commit 7f76a2bf319f59d463a1f96974b03d7c651847dd +Author: Chris Wilson +Date: Wed Jul 17 10:22:17 2013 +0100 + + sna: Fall back to /proc/cpuinfo parsing if cpuid cache size probe fails + + Older hardware does not support cache size probing via cpuid4, so we + need to implement the older algorithm which requires a table based + lookup. (And in hindsight, why I thought cache probing via cpuid to be + quite hairy.) For the moment, just use the value found in /proc/cpuinfo. + + Reported-by: Oscar Dario Trujillo Tejada + Reported-by: Ferry Toth + Signed-off-by: Chris Wilson + +commit 3f3071c6c91c3907cb0fecf2f69a995feefe7956 +Author: Chris Wilson +Date: Wed Jul 17 09:02:19 2013 +0100 + + sna: Set a minimum size for tiled IO + + And assert that we never ask for a zero-sized upload. + + Signed-off-by: Chris Wilson + +commit 0952e7e04167d7b2284fc794ed9fb30afebdaf52 +Author: Chris Wilson +Date: Wed Jul 17 08:24:19 2013 +0100 + + sna: Include linear GTT maps when deciding whether a bo is mappable + + If the linear bo is still in the CPU domain, we can map it through the + CPU with no penalty, so treat it as mappable. + + Signed-off-by: Chris Wilson + +commit 34c9b759fbab8d548108e954d55de38c6f5bec31 +Author: Chris Wilson +Date: Tue Jul 16 19:39:37 2013 +0100 + + sna: Note that borderClip region may be more than a singular box + + If the child is obscured, then borderClip will contain a list of valid + boxes rather a singular extents. I thought this was covered by the + clipList, but I was wrong. + + Reported-by: Jesse Barnes + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66970 + Signed-off-by: Chris Wilson + +commit 1323abcc2eb19df81a000d4a37af6949801a9076 +Author: Chris Wilson +Date: Tue Jul 16 09:02:01 2013 +0100 + + sna: Make the assumption bpp>=8 explicit inside the bo size calculation + + Use an assert to document that we have a few rounding issues if bpp < 8. + + Signed-off-by: Chris Wilson + +commit 4a447c514b3193897e0d3ec4b3cf75f346d7438e +Author: Chris Wilson +Date: Tue Jul 16 08:58:21 2013 +0100 + + sna: Create a pixmap in ordinary system memory for depth=1 uploads + + Since we will not sample depth=1 pixmaps from the GPU, we may as well + directly allocate these in system memory and avoid tickling the upload + cache. This then avoids an issue within the size calculation code which + makes the assumption that bpp>=8. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 884dd896e4e959e5a284a6f70da9e5cde1bbb7e9 +Author: Chris Wilson +Date: Mon Jul 15 10:59:39 2013 +0100 + + sna: Change message context to PROBED for initial configuration + + Since we are retreiving the hw values rather than choosing a default for + ourselves, it is more consistent to use PROBED rather than INFO for our + message. + + Signed-off-by: Chris Wilson + +commit f8677a971bdbeb8e472b74385780c41c7a51c522 +Author: Chris Wilson +Date: Mon Jul 15 10:24:53 2013 +0100 + + sna/gen4: Allow rendering to Y-tiled surfaces + + We no longer seem to be hitting the same random hangs, so presumably + another w/a is taking effect. + + Signed-off-by: Chris Wilson + +commit e83e7e60f41cb29132d5eef60af16b65b1b3cd4e +Author: Chris Wilson +Date: Sun Jul 14 09:31:39 2013 +0100 + + 2.21.12 release + +commit 0230ef72cbb2d3bcf7157548ddd52a71c0c771c5 +Author: Chris Wilson +Date: Fri Jul 12 23:57:42 2013 +0100 + + sna: Skip copying to the intermediate target if we will completely overwrite it + + Occasionally when forced to use an intermediate destination surface, we + know that we will completely overwrite the contents of the surface and + so we can forgo the initial copy from the target. + + Signed-off-by: Chris Wilson + +commit 2b16eaefb38b4a6efe50a397e68793ab9a1cb2ef +Author: Chris Wilson +Date: Fri Jul 12 23:22:59 2013 +0100 + + sna: Avoid integer overflow when computing the tiled extents + + When stepping over the tiles, beware that the step may overflow the + int16_t region extents, so use an int for the calculation. + + Reported-by: Andrew Woodward + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1200766 + Signed-off-by: Chris Wilson + +commit 835ceccb27afa18704c34dc3283476340f999317 +Author: Chris Wilson +Date: Fri Jul 12 23:20:56 2013 +0100 + + sna/gen5: Add some more DBG + + Signed-off-by: Chris Wilson + +commit 39f1954f667bf20cd0c25dfa5fb5267a3f9eb113 +Author: Chris Wilson +Date: Thu Jul 11 21:57:02 2013 +0100 + + sna: Replace parsing of /proc/cpuinfo with parsing of cpuid + + Courtesy of a patch from Chad Versace via Ben Widawsky, actually digging + through CPUID for the cache info looks quite easy in comparison to the + fragile approach of parsing a linux specific file that may or may not be + available. + + Signed-off-by: Chris Wilson + +commit c604d1426cc11f9799044710acf1ef7d226d2604 +Author: Chris Wilson +Date: Thu Jul 11 16:40:51 2013 +0100 + + sna: Remove the duplicated open-coding of SetScreenPixmap + + Signed-off-by: Chris Wilson + +commit 07926bfe507071a3d46a2ec13bb86a36bc225761 +Author: Chris Wilson +Date: Thu Jul 11 15:28:55 2013 +0100 + + sna: Remove the temporary region allocation from sna_do_copy + + Signed-off-by: Chris Wilson + +commit 519d0007d4add23b14b5a9fd83cf4a1b68c63d03 +Author: Chris Wilson +Date: Wed Jul 10 18:24:36 2013 +0100 + + sna: Remove incorrect asserts for checking CPU mappings (after remapping) + + These assertions were checking that the previous state prior to + performing the new mapping was consistent. Given that the checks were + occurring after the update in mapping, the asserts were bogus. + + Signed-off-by: Chris Wilson + +commit a18f4ba9033cec3cc435c29878b12ceef1defc1f +Author: Chris Wilson +Date: Wed Jul 10 11:56:50 2013 +0100 + + sna: Ofast was introduced with gcc-4.6 + + Thomas Jones reported that the build was failing with gcc-4.5 due to the + memcpy routines requesting an unsupported optimisation mode (-Ofast) and + supplied this patch to only enable Ofast for gcc-4.6+ + + Reported-by: Thomas Jones + Signed-off-by: Chris Wilson + +commit ccf0fdd56dc6efd30e425209d753ed4f90562d76 +Author: Chris Wilson +Date: Tue Jul 9 20:41:51 2013 +0100 + + sna: Only flush after the BLT operation if we have more than 2 distinct bo + + In order to preserve the optimisation of discarding incomplete batches, + we don't always want to immediately submit the batch after inserting the + first command. As we currently only cancel a batch if it only touches + the bo being discarded, we can skip the immediate flush if it only + accesses one bo and maybe be able to use the undo optimisation later. + + Signed-off-by: Chris Wilson + +commit d935912d9c13ec8cf4f641c55846714d4e9ba929 +Author: Chris Wilson +Date: Tue Jul 9 20:38:32 2013 +0100 + + sna: Free the source reference after performing a BLT composite + + Fixes regression from + commit 8751c0f5ad202850bdd56dbb4eedb211c023cf23 + Author: Chris Wilson + Date: Fri Jul 5 17:55:10 2013 +0100 + + sna: Flush blt copies if no operations pending + + Reported-by: Andreas Reis + Reported-by: Mike Lothian + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66742 + Signed-off-by: Chris Wilson + +commit b202008f8f6470f256d3b9000a9f78b6ca8d932b +Author: Chris Wilson +Date: Fri Jul 5 13:50:34 2013 +0100 + + sna: Experiment with a new ioctl to create buffers from stolen memory + + If there is stolen memory reserved by the BIOS, we want to utilize it in + preference to regular system memory. However, given the caveat that it + is not suitable for CPU access, rules out most use cases - but it is a + good match for framebuffers. + + Signed-off-by: Chris Wilson + +commit dbb585b9d2510efa9f8432bc25842fa14a8e495e +Author: Chris Wilson +Date: Sun Jul 7 09:17:58 2013 +0100 + + sna/gen4: Remove custom max flush vertices w/a from video path + + This should now be superseded by using the common w/a. + + Signed-off-by: Chris Wilson + +commit 2a59eadf8165bd70780ac16220456c6196ac3ff1 +Author: Chris Wilson +Date: Sun Jul 7 09:13:49 2013 +0100 + + sna/gen4: Remove the glyph mask hack and tune the flush w/a + + Remove the hack from the glyph path to force the use of an auxiliary + channel, and reduce the maximum amount of inflight vertices until we can + then render glyphs with no corruption (at least in my test case). + + Signed-off-by: Chris Wilson + +commit c9c1833c30421e1461f6b03b858bbc187068eb0c +Author: Chris Wilson +Date: Sun Jul 7 08:58:52 2013 +0100 + + sna/gen4: Tighten FORCE_FLUSH w/a to spot amalgamation of primitives + + Inspect whether this rectangle will be added to the previous primitive + and so charge it against the current number of inflight rectangles. + + Signed-off-by: Chris Wilson + +commit 368c909b29758f996dbbdbec4d471df23f60bc04 +Author: Chris Wilson +Date: Sat Jul 6 22:27:44 2013 +0100 + + sna/gen4: Restore the flush-every-vertex w/a + + This is an abhorrent workaround for some internal GPU brokenness. A + slight refinement since earlier times is the recognition that 16 is a + magic number limiting the maximum number of inflight rectangles through + the GPU. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit 1fbf47ec1bed888c1b7c8dcbeb01d8e067727c82 +Author: Chris Wilson +Date: Sat Jul 6 18:30:47 2013 +0100 + + sna: Tune inplace hints for CPU operations with GPU targets + + Signed-off-by: Chris Wilson + +commit 5aaab9ea0310d48bb1a1ca20308d1c9721a9de3f +Author: Chris Wilson +Date: Sat Jul 6 15:10:22 2013 +0100 + + sna: Relax assertion that the source of the cloned pixmap cannot be mapped + + I was being overzealous at the time of making the COW and trying to be + sure that we would never write through a mapping. Then I started to + allow clones to be mapped (for reads) and missed relaxing this assertion. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 8751c0f5ad202850bdd56dbb4eedb211c023cf23 +Author: Chris Wilson +Date: Fri Jul 5 17:55:10 2013 +0100 + + sna: Flush blt copies if no operations pending + + More work to try and keep the GPU busy. + + Signed-off-by: Chris Wilson + +commit f5529ea61b5e12e0c2d9fda817948ca0a4cab212 +Author: Chris Wilson +Date: Thu Jul 4 21:39:33 2013 +0100 + + sna: Use a stack allocated PixmapRec for the fbcon copy + + Signed-off-by: Chris Wilson + +commit ea508c177c961ba2f00129476a22a32ff3ea6f1b +Author: Chris Wilson +Date: Thu Jul 4 20:19:20 2013 +0100 + + sna: Set 1024x768 fb in absence of any connected devices + + No actual initial configration magic is required, all we need to do is + set the initial framebuffer size with no connected outputs and leave it + to the core to select CompatOutput() the like. + + Signed-off-by: Chris Wilson + +commit d36c9542d2bd707838a87c451bf76f091aaf5cba +Author: Chris Wilson +Date: Thu Jul 4 10:45:09 2013 +0100 + + sna: Fix gamma query to not request uninitialized values + + Oops, surprising that ebf4517a0b had any positive effect. + + Signed-off-by: Chris Wilson + +commit 59fa53707eed18e5cc151bd2ce05a2dcdd325630 +Author: Chris Wilson +Date: Thu Jul 4 08:51:58 2013 +0100 + + sna: Set the initial gamma from the attached monitor configuration + + Fixes a missed configuration option from + commit 8a6a21bff86100144ba7960fc32a299ac54ada83 [2.21.11] + Author: Chris Wilson + Date: Wed Jun 26 13:29:48 2013 +0100 + + sna: Use the existing configuration for initial modes + + Signed-off-by: Chris Wilson + +commit ebf4517a0bb510e406795c169aa21b7cc615ed31 +Author: Chris Wilson +Date: Wed Jul 3 22:44:46 2013 +0100 + + sna: Always read back the gamma, even for a inactive CRTC + + Even if the CRTC is inactive, we still need to initialise the gamma + tables. + + Reported-and-tested-by: Timo Kamph + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66563 + Signed-off-by: Chris Wilson + +commit 4def5ecf6ebc2c6dc05e60d4595fa3dd4b7e38d2 +Author: Chris Wilson +Date: Wed Jul 3 21:56:54 2013 +0100 + + sna: Tidy up the user override enums + + Since we have a second place dependent upon the hidden ordering of the + output options, simplify by copying the complete enum block from + hw/xfree86/modes/xf86Crtc.c + + Signed-off-by: Chris Wilson + +commit 5adca344b2f95cf2f2b2b3fabf6c99c39b64f25f +Author: Chris Wilson +Date: Wed Jul 3 21:45:11 2013 +0100 + + sna: Fix configuration user overrides on xorg-server < 1.14.99.1 + + Marty Jack found that the enums for the user overrides were off by one + (his xorg conf was no longer being applied). This is because I had + missed the introduction of ZoomModes in 1.14.99 increasing all the + important enum values by one. + + Reported-by: Marty Jack + Signed-off-by: Chris Wilson + +commit 1445a62da8a08acd8a732176d085fd098f68cec3 +Author: Chris Wilson +Date: Wed Jul 3 12:59:31 2013 +0100 + + intel: Add an option for forced rediscovery of output status on startup + + Specifying + Section "Device" + Option "ReprobeOutputs" "true" + EndSection + will restore the old behaviour of scanning each output on startup and + picking a spanning mode. + + The behaviour was changed in + commit 8a6a21bff86100144ba7960fc32a299ac54ada83 [2.21.11] + Author: Chris Wilson + Date: Wed Jun 26 13:29:48 2013 +0100 + + sna: Use the existing configuration for initial modes + + Please do notify us of any circumstances that force you to use this + flag. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=66494 + Signed-off-by: Chris Wilson + +commit 2ecff61d369d9f67c6e28d407941f35ed6195156 +Author: Chris Wilson +Date: Wed Jul 3 12:45:10 2013 +0100 + + intel: Retire Option "RelaxedFencing" + + The kernel bugs have long since been fixed and should have been + propagated to all stable kernels long ago. Now there should be no need + to workaround those bugs. + + Signed-off-by: Chris Wilson + +commit c957f4171791447f1869f11fd724dbe92e6a8b91 +Author: Chris Wilson +Date: Tue Jul 2 23:59:02 2013 +0100 + + sna: Try harder to do the BLT upload along the fallback path + + Only in the !fallback path will we try using the render pipeline after + the blt, in which case we can try using render rather than forcing a + stall. In the fallback path, we are going to incur stalls and readbacks, + anyway so ignore them when considering blt. + + Signed-off-by: Chris Wilson + +commit 158095ff2b2d38f54ca91d2a728f919cd705ff62 +Author: Chris Wilson +Date: Tue Jul 2 23:17:32 2013 +0100 + + sna/gen2: Fix alpha replication in the copy pipeline + + When copying into an a8 surface we need to replicate the result into the + green channel. It helps to tell the GPU from where to source the value + to be replicated. + + Signed-off-by: Chris Wilson + +commit 2b0d36c63817c08990b8ae4efd60df4a11619e0f +Author: Chris Wilson +Date: Tue Jul 2 23:16:54 2013 +0100 + + sna: Assorted DBG + + This DBG was useful for narrowing down the issue in the next patch... + + Signed-off-by: Chris Wilson + +commit 103672869c64a1e42022069f413478c256c0ee00 +Author: Chris Wilson +Date: Tue Jul 2 20:52:23 2013 +0100 + + sna: Add the condition that 855gm cannot GTT map Y-tiled surfaces + + We had the check in a couple of places, but missed a key one that + decided whether or not to perform a GTT mapping of a bo. + + Signed-off-by: Chris Wilson + +commit 9aa665ae33c3ac54b8896e6f8373dfda2637e392 +Author: Chris Wilson +Date: Tue Jul 2 15:53:38 2013 +0100 + + sna: Only preserve the real fbcon upon first starting X + + We only want to preserve the plymouthd splash screen for flicker free + start up, a subsequent regeneration should be cleared instead. + + Signed-off-by: Chris Wilson + +commit 21e29e95265331f8a33cd676c2d3124007643135 +Author: Chris Wilson +Date: Tue Jul 2 15:25:46 2013 +0100 + + sna: Simplify validation of active CRTCs + + Atter a modeset or KMS takeover, we do a quick readback of the kernel + state in order to verify that it matches our expectations. If we find + that a foreign framebuffer is attached, or no mode if set on the output, + we then turn off that connection and release any resources associated + with that pipe. This patch tries to reduce the number of superfluous + requests to turn off a connection. + + Signed-off-by: Chris Wilson + +commit 67a6a4bfd9cd1a861911e76096923bfc652189e2 +Author: Chris Wilson +Date: Tue Jul 2 14:27:03 2013 +0100 + + sna: Hook into crtc_notify rather than ModeSet + + ModeSet is called after updating each CRTC, unlike crtc_notify which is + called after applying all changes. The last is what we need as if we are + called too early we detect that the next CRTC doesn't match our + expectations and so we disable it, right before applying the desired + mode. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=66494 + Signed-off-by: Chris Wilson + +commit c361b449cc3ec15819883afc220aad8823c0072d +Author: Chris Wilson +Date: Tue Jul 2 09:49:48 2013 +0100 + + sna: Include connector status in the initial probe + + We cannot simply rely on connector->encoder->crtc status as with the + introduction of Haswell or SDVO we may have multiple connectors using the + same encoder. So we need to explictly check the connector status first, + before determining if the output is connected to an active encoder and + CRTC. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=66488 + Signed-off-by: Chris Wilson + +commit 282507af8e932e49b31d5f20958a61c137df590d +Author: Chris Wilson +Date: Tue Jul 2 09:34:57 2013 +0100 + + intel: Move the validation of the KMS device into the open routine + + Currently we leak the fd should we open the device node and decide that + is not a GEM/KMS kernel driver. The simplest way to perform the cleanup + upon failure is to move the checking for GEM/KMS into the device open + routine. + + Signed-off-by: Chris Wilson + +commit 24a7bec7faa7dcc4393ef7f66939ae0fb8acdf36 +Author: Chris Wilson +Date: Mon Jul 1 22:43:02 2013 +0100 + + sna: Minor tweaks to make DBG compile again + + Signed-off-by: Chris Wilson + +commit ad0afda3fe4f5e408e3610d8b76fdc7d1af33138 +Author: Chris Wilson +Date: Mon Jul 1 22:26:29 2013 +0100 + + sna: Fix checking the dirty boxes + + I forgot how insane the data structure for the list of dirty boxes + attached to the damage is. It is neither a simple list, nor does not store + the count of boxes within each chunk. + + Fixes regression from + commit 9026bb954646c0425360c2236e26c79d097142cd [2.21.11] + Author: Chris Wilson + Date: Fri Jun 28 15:59:17 2013 +0100 + + sna: Inspect the dirty boxes when querying whether damage contains a rectangle + + A side effect is that we now make sure that there is an upper bound to + the amount of searching we do for the no-reduce fast path. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66430 + Signed-off-by: Chris Wilson + +commit 1c8a33a72e29261d6bf5a6c160765cbafa4d0b88 +Author: Chris Wilson +Date: Mon Jul 1 17:41:41 2013 +0100 + + sna: Allow scanouts to be untiled if need be + + Fixes regression from + commit 77fa8ab08b441934218ddb8f690be1a919f0ec64 [2.21.11] + Author: Chris Wilson + Date: Tue Jun 25 22:25:25 2013 +0100 + + sna: Free just-allocated bo if we fail to set-tiling on CREATE_EXACT + + Signed-off-by: Chris Wilson + +commit 9cb6756ce16491e42c6e21bc74a5f7de5432510f +Author: Chris Wilson +Date: Mon Jul 1 17:27:17 2013 +0100 + + sna: Always create the clear Picture + + As we unconditionally use it irrespective of whether we then call + accelerated code paths or not. + + Fixes regression from + commit dc18eaa585c36c8e5f5b4ec405a976a835fd2ac3 [2.20.10] + Author: Chris Wilson + Date: Sun Aug 12 10:34:10 2012 +0100 + + sna: Make the failure to create render caches non-fatal + + in the event we need to start with a hung GPU. + + Signed-off-by: Chris Wilson + +commit c6c6ae71bedce43ff6617179c015c303cbaee9ae +Author: Chris Wilson +Date: Mon Jul 1 17:00:17 2013 +0100 + + sna: Make sure we are consistent in applying USE_INPLACE debug option + + A few new paths were missing the debug check, and clarify a few indirect + uses by performing the explicit check. + + Signed-off-by: Chris Wilson + +commit cce2351056eda1282a521b96f90ba12436e86492 +Author: Chris Wilson +Date: Mon Jul 1 16:13:47 2013 +0100 + + sna: Debug options for forcing mmap syncs + + Signed-off-by: Chris Wilson + +commit 7aff6beb37c91df85c46372d44ae4a5fefae5ae8 +Author: Chris Wilson +Date: Mon Jul 1 17:57:49 2013 +0100 + + sna: Improve the message about where to find the hang state + + Search the few canonical locations for our hang state so that we can be + more explicit to the user about what to include. + + Signed-off-by: Chris Wilson + +commit e0e84e6686be390ef204117525d4a5c6aebbbe07 +Author: Chris Wilson +Date: Mon Jul 1 16:49:50 2013 +0100 + + sna: Mark an inplace getimage as preferring the CPU mapping afterwards + + Signed-off-by: Chris Wilson + +commit e648c1f39cc17d39eff077639f23687894724b7b +Author: Chris Wilson +Date: Mon Jul 1 15:27:38 2013 +0100 + + sna: Assert that we do not have overlapping damage + + Double check that the results of the box query match with the slow + queries. + + Signed-off-by: Chris Wilson + +commit 7c6cc0c9edb8f1ebcc8be5edb78c9d858dce1965 +Author: Chris Wilson +Date: Mon Jul 1 15:04:58 2013 +0100 + + sna: Check whether the query box is contained within the damage + + We can improve our query for whether the rectangle of interest is within + the damage by checking whether the damage extents contains the entire + box rather than just checking for an overlap. + + Signed-off-by: Chris Wilson + +commit 64cb923588df0547880009bbeaeecb7ac3ee8ecf +Author: Chris Wilson +Date: Mon Jul 1 14:30:21 2013 +0100 + + sna: Experiment with cpu mappings for migration + + Signed-off-by: Chris Wilson + +commit 12c013d25ed0c08f748b0a7250cbcef1cded26b0 +Author: Chris Wilson +Date: Mon Jul 1 13:28:57 2013 +0100 + + sna: Do not use userptr for GetImage on unsupported architectures + + If the system cannot blt to a CPU buffer, we should even attempt to do + so for GetImage. + + Signed-off-by: Chris Wilson + +commit 7d9163983ea2e960c0a7b55266fcc532b9c6e382 +Author: Chris Wilson +Date: Sun Jun 30 15:26:57 2013 +0100 + + 2.21.11 release + +commit 5005bd2d52ab64cbeae099d512d0b65be6c4abaa +Author: Chris Wilson +Date: Sun Jun 30 15:02:19 2013 +0100 + + intel: Fix failure code for reporting !drmCheckModesetingSupported + + The new function returns the fd, not a Bool, so the error code must now + be -1. + + Signed-off-by: Chris Wilson + +commit f8738d7b4cc1c624d4390ef9ce7426ba457d7dd3 +Author: Jonathan Gray +Date: Sun Jun 30 19:37:45 2013 +1000 + + intel: replace direct ioctl use with drm{Set, Drop}Master + + Use drmSetMaster/drmDropMaster instead of calling the ioctls + directly. Fixes compilation on OpenBSD where these ioctls + aren't defined. + + Signed-off-by: Jonathan Gray + +commit 40301e6d03f6e8d2d2d01e6bb9f1754a7e543a08 +Author: Chris Wilson +Date: Sun Jun 30 11:12:34 2013 +0100 + + sna: Store the path used to open the device and pass to DRI + + Avoid having to search the device tree once again in order to simply + recover the path we used to open the device. + + Signed-off-by: Chris Wilson + +commit 17da58f904e75d434aaf71e297e15d41153ba954 +Author: Chris Wilson +Date: Sun Jun 30 11:01:49 2013 +0100 + + sna: Replace conflicting drmDropMaster + + Calling drmDropMaster twice along the CloseScreen path is not a good + idea. + + Signed-off-by: Chris Wilson + +commit 3a787da7e888da7e9943be94bd1cb177fe1495ab +Author: Chris Wilson +Date: Sat Jun 29 21:57:20 2013 +0100 + + sna: Allow tiled memcpy on i386 + + With the split into per-swizzle functions, and with the forced + optimisation levels, it appears that i386 doesn't suffer so badly and + the tiled memcpy are a viable method. + + Signed-off-by: Chris Wilson + +commit 1d9941a7c003587c0bd732fb8b21fee5cefa6f87 +Author: Chris Wilson +Date: Sat Jun 29 21:56:13 2013 +0100 + + sna: Add the Ofast option to the critical memcpy routines + + Always enable gcc to fully optimize the core memcpy routines (provided + that optimisations are not entirely disabled, for instance for + debugging). + + Signed-off-by: Chris Wilson + +commit 84c190db33142f3c1ec347ec0bf87f77ce132d36 +Author: Chris Wilson +Date: Sat Jun 29 19:06:40 2013 +0100 + + sna: Fix get_image_inplace to use the pixmap offset + + The inplace routine assumed that the region to be read was already in + pixmap coordinates. Making it so makes the code easier, so do it. + + Signed-off-by: Chris Wilson + +commit c7d246ba6f750ee080c38ccc5603d01fcf7fce92 +Author: Chris Wilson +Date: Sat Jun 29 16:31:34 2013 +0100 + + sna: Move the clone discard into free-gpu + + Rather than peppering the discard manually before the call to free the + GPU bo, always discard the COW when we actually free the GPU bo. + + Signed-off-by: Chris Wilson + +commit 6ab2a3acf71b5204c399c7649e5601c93a99f25f +Author: Chris Wilson +Date: Sat Jun 29 15:04:09 2013 +0100 + + sna: Improve checks for coherent access through CPU mappings + + Refactor the CPU mapping tests to a single function, and remember to + test for a pending GPU write (i.e. bo->exec). + + Signed-off-by: Chris Wilson + +commit 9026bb954646c0425360c2236e26c79d097142cd +Author: Chris Wilson +Date: Fri Jun 28 15:59:17 2013 +0100 + + sna: Inspect the dirty boxes when querying whether damage contains a rectangle + + This helps in the cases where we have subtracted a small number of + rectangles from an all-damage pixmap (such as a number of successive + GetImage, PutImage operations). The danger is that we end up searching a + long list of dirty boxes - maybe just search the first chunk if that + becomes noticeable? + + Signed-off-by: Chris Wilson + +commit d635e05c9dd26a397ccf958be091b56d1075e923 +Author: Chris Wilson +Date: Fri Jun 28 19:24:06 2013 +0100 + + sna: Promote assert(!priv->mapped) along migration paths + + With the advent of the more permissive mapping schemes and finer damage + tracking, we are more liable to have pixmaps mapped and so can reach the + upload path with the pixmap still mapped. + + Signed-off-by: Chris Wilson + +commit 2d40500851a7c6d857b17258e4989ddf7401cfbc +Author: Chris Wilson +Date: Fri Jun 28 15:12:13 2013 +0100 + + sna: Add asserts around applying clears + + Signed-off-by: Chris Wilson + +commit e3ad737ef9d33e924b206741949d59224bfef566 +Author: Chris Wilson +Date: Fri Jun 28 15:33:54 2013 +0100 + + sna: Use inplace CPU mapping readback for GetImage on linear buffers + + Signed-off-by: Chris Wilson + +commit 626b5e541663f838475eaef2c1bc3ae4d4848165 +Author: Chris Wilson +Date: Fri Jun 28 14:24:10 2013 +0100 + + sna: Add debug control for disabling accelerated GetImage + + Signed-off-by: Chris Wilson + +commit 2356579cdff36adf58fb69894f646a6e63053a15 +Author: Chris Wilson +Date: Fri Jun 28 13:18:00 2013 +0100 + + sna: Assert that the kernel tiling mode matches our bo + + Signed-off-by: Chris Wilson + +commit e979d32bb71fef7341ceb9c2b2e80c6dfa50a7b3 +Author: Chris Wilson +Date: Fri Jun 28 10:59:23 2013 +0100 + + sna/gen2+: Consider precision in render operation placement + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66297 + Signed-off-by: Chris Wilson + +commit 541f816815e392db9e798d2f940029d82a6b2e0b +Author: Chris Wilson +Date: Fri Jun 28 10:14:16 2013 +0100 + + sna: Markup when a gradient is opaque + + Signed-off-by: Chris Wilson + +commit 34e6366f2a61c145445056e5fc6c483999c0402c +Author: Chris Wilson +Date: Fri Jun 28 10:03:47 2013 +0100 + + sna/blt: Remove a pair of leftover asserts + + As the variable they were inspecting was removed, the asserts are now + breaking the debug build. + + Signed-off-by: Chris Wilson + +commit 0c93a0cf41cbfe88b18e9e69bd97bd75cf2404bd +Author: Chris Wilson +Date: Fri Jun 28 00:35:14 2013 +0100 + + sna: Compensate redirect drawing subrectangle inside an offset pixmap + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66249 + Signed-off-by: Chris Wilson + +commit e33fbd6d7ff2a9efcc14974a05b5e1eb01bbce34 +Author: Chris Wilson +Date: Fri Jun 28 08:53:32 2013 +0100 + + sna/blt: Refine op placement logic for handling current source location + + Signed-off-by: Chris Wilson + +commit 48b5ac11a0737f65de2e6290308bd37017cc29a9 +Author: Chris Wilson +Date: Thu Jun 27 21:39:30 2013 +0100 + + intel: Use fcntl to try and set CLOEXEC if the open(O_CLOEXEC) fails + + As suggested by Arkadiusz Miskiewicz. + + Signed-off-by: Chris Wilson + +commit 9b3e5c211451ac07bd96cd997ac714bcbe1809b0 +Author: Chris Wilson +Date: Thu Jun 27 21:08:05 2013 +0100 + + intel: #ifdef O_CLOEXEC for compilation on squeeze + + If the system doesn't support O_CLOEXEC, then we simply can't use it. + + Signed-off-by: Chris Wilson + +commit caf43fcadb0fcb3d342543f1e7dd78ee2314a627 +Author: Chris Wilson +Date: Thu Jun 27 16:52:21 2013 +0100 + + sna: Enable memcpy_from_tiled for the IO paths + + Should you ever need to read back from a tiled surface and for whatever + reason do not have a CPU bo to accelerate the operation, maybe we could + use the manual tiling instead (as it is useful elsewhere). + + Signed-off-by: Chris Wilson + +commit b5e85e495e55e2537d305b7bebacdf6f97b66199 +Author: Roy.Li +Date: Thu Jun 27 14:10:14 2013 +0800 + + uxa: fix the compilation error with xorg-xserver <= 1.10 + + struct _Screen has no canDoBGNoneRoot when ABI_VIDEODRV_VERSION is less than 10.0 + + Signed-off-by: Roy.Li + +commit 41715af4d009bfcb351946ddaa3a3ea3767a1429 +Author: Chris Wilson +Date: Thu Jun 27 16:36:52 2013 +0100 + + configure: SNA supports the old Xorgs + + So allow it to be compiled by default for older Xorgs as well. + + Signed-off-by: Chris Wilson + +commit 7ce487617445c81f0178823de8896a2b73bbaaf1 +Author: Chris Wilson +Date: Thu Jun 27 16:08:43 2013 +0100 + + sna: Trim the large object threshold + + Be kinder to smaller machines by lowering the threshold at which treat + an object as huge and worthy of avoiding duplication. + + Signed-off-by: Chris Wilson + +commit 31467e18d2ccdc42b0601b43b581524859de1373 +Author: Chris Wilson +Date: Thu Jun 27 16:07:36 2013 +0100 + + sna: Prefer operating inplace with a very large GPU bo + + As we strive to only keep one copy when working with very large objects, + so try operating inplace on a mapping for CPU operations with a large + GPU bo. + + Signed-off-by: Chris Wilson + +commit b615ce97ec43ea8fe02e995244c757138abcb2de +Author: Chris Wilson +Date: Thu Jun 27 10:45:22 2013 +0100 + + sna: Add a fast path for reading back from tiled X bo + + This is lower latency than the double copy incurred for first moving the + bo to the CPU and then copying it back - but due to the less efficient + tiled memcpy, it has lower throughput. So x11perf -shmget500 suffers + (by about 30%) but real world applications improve by about 2x. + + Signed-off-by: Chris Wilson + +commit 6493c8c65f93ad2554c2512a07ba640e966fd026 +Author: Chris Wilson +Date: Thu Jun 27 10:45:13 2013 +0100 + + sna: Implement memcpy_from_tiled functions (for X-tiling only atm) + + To provide symmetry with the ability to write into an X-tiled mapping of + a bo, we add the memcpy_from_tiled to be able to read back from the same + bo. + + Signed-off-by: Chris Wilson + +commit 60d716b53993b08a2a00c22f523c575e62e0a18d +Author: Chris Wilson +Date: Thu Jun 27 14:11:00 2013 +0100 + + sna: Add the probed CRTC mode to the list of output modes + + Signed-off-by: Chris Wilson + +commit 263e87d5e1915e6c40fa8bc1b325a36f21f92b30 +Author: Chris Wilson +Date: Thu Jun 27 13:57:22 2013 +0100 + + sna: Set the current mode when initialising CRTCs + + Signed-off-by: Chris Wilson + +commit 2f2f439c9cfdd394ad2b9a125db51e2dba7d3ff7 +Author: Chris Wilson +Date: Thu Jun 27 12:58:58 2013 +0100 + + sna: Fake the output physical width/height from the CRTC size + + Signed-off-by: Chris Wilson + +commit 5124f35168c0cc162cf5e8bcaafdf756945f6ca9 +Author: Chris Wilson +Date: Thu Jun 27 12:32:24 2013 +0100 + + sna: Support operations inplace on CPU mappings of a region + + Signed-off-by: Chris Wilson + +commit 18ee5c20d5f8f1752b89f2377e9b9c3f1c140d53 +Author: Chris Wilson +Date: Thu Jun 27 11:49:33 2013 +0100 + + sna: We can read from cloned pixmaps inplace - so long as we don't write + + Signed-off-by: Chris Wilson + +commit 36993618b4c5d4fa1fde7800eaaa711b074bd623 +Author: Chris Wilson +Date: Thu Jun 27 10:48:23 2013 +0100 + + sna: Tweak ordering of userptr temporary mappings for uploads + + There are a few more circumstances where the temporary mapping is + beneficial, such as pixmaps that are only shadow copies or operations + that require reads on the destination. + + Signed-off-by: Chris Wilson + +commit c6ad9861f00a3166fd89a7c43d602a4c2a5bde24 +Author: Chris Wilson +Date: Thu Jun 27 10:59:06 2013 +0100 + + sna: Fix DBG printing of can_upload_tiled_x() + + The function changed it parameters, this DBG caller did not. + + Signed-off-by: Chris Wilson + +commit 591981a36c333cdf08a91f28fb9670a62b95d31a +Author: Chris Wilson +Date: Thu Jun 27 10:02:28 2013 +0100 + + sna: Refactor freeing gpu_bo in manual tiled upload + + Use the common function so that we correctly check for pinned GPU bo, + and adjust the hints afterwards. + + Signed-off-by: Chris Wilson + +commit 8f6dcc15c8d6ea726a10ef5df18536f8c769291e +Author: Chris Wilson +Date: Thu Jun 27 09:27:57 2013 +0100 + + sna: Detect and handle cloned pixels for manual tiled uploads + + Signed-off-by: Chris Wilson + +commit d7be3df2fe632bbc8e4f09709cf3cf7a5ef61015 +Author: Chris Wilson +Date: Wed Jun 26 17:01:37 2013 +0100 + + sna: Se the default gamma if left uninitialized by the driver + + Due to a bug in i915.ko the gamma ramp is left uninitialised... + + Signed-off-by: Chris Wilson + +commit 491f4fab21df97af1dae92eaf30e76ff62920fb2 +Author: Chris Wilson +Date: Wed Jun 26 15:15:17 2013 +0100 + + sna: Correct typo s/\j/\n/ + + When is a newline, not a newline? When it is ajar. + + Signed-off-by: Chris Wilson + +commit a40dd0ed6db35c891710199cc9d18345ab53b397 +Author: Chris Wilson +Date: Wed Jun 26 14:50:19 2013 +0100 + + sna: Explicitly initialise the probed transform for a CRTC + + Signed-off-by: Chris Wilson + +commit 01ce3ef9f12d3b6541e166f22e1ae67033237159 +Author: Chris Wilson +Date: Wed Jun 26 14:26:22 2013 +0100 + + sna: Set RR_Rotate_0 instead of 0 as desired initial rotation + + Signed-off-by: Chris Wilson + +commit c5651254c3c152daf1ed79073779c1bed6ed0a9b +Author: Chris Wilson +Date: Wed Jun 26 14:18:49 2013 +0100 + + sna: Fallback to xf86InitialConfiguration if nothing is connected + + Use the default mechanism for picking a fallback output and mode if + nothing is connected at X startup. + + Signed-off-by: Chris Wilson + +commit 8a6a21bff86100144ba7960fc32a299ac54ada83 +Author: Chris Wilson +Date: Wed Jun 26 13:29:48 2013 +0100 + + sna: Use the existing configuration for initial modes + + After checking for user overrides (preferred output modes, rotation and + placement), copy the current CRTC configuration from the kernel into the + desired modes. This should enable X to start without introducing any extra + flicker. + + Signed-off-by: Chris Wilson + +commit 362b0dc6a3b1692b752d8f250075ccc81debfca3 +Author: Chris Wilson +Date: Wed Jun 26 12:04:46 2013 +0100 + + sna/gen4+: Fix determination of intermediate extents + + Complete logic fail for finding the bounding box of the boxes to be + copied. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66168 + Signed-off-by: Chris Wilson + +commit 2212468315f383d09ea17c2edac8666bdb862bc7 +Author: Chris Wilson +Date: Wed Jun 26 11:26:29 2013 +0100 + + sna: Avoid allocating a temporary if using rendercpy tiles + + Signed-off-by: Chris Wilson + +commit fc5b9a96194583c67705d7d05afc3e04e97e3338 +Author: Chris Wilson +Date: Tue Jun 25 22:58:31 2013 +0100 + + sna: Clear mapped state after performing manual tiling + + Signed-off-by: Chris Wilson + +commit 3f33abee370bb1ce60bca91f29affc62d06b0bad +Author: Chris Wilson +Date: Tue Jun 25 22:43:48 2013 +0100 + + sna: Do not force creation of CPU maps on !llc + + Signed-off-by: Chris Wilson + +commit 77fa8ab08b441934218ddb8f690be1a919f0ec64 +Author: Chris Wilson +Date: Tue Jun 25 22:25:25 2013 +0100 + + sna: Free just-allocated bo if we fail to set-tiling on CREATE_EXACT + + If the caller requires an exactly constructed bo, abandon the attempt if + we cannot set the tiling as specified. + + Signed-off-by: Chris Wilson + +commit 273716029e5318f1670e7111be2085c950995d42 +Author: Chris Wilson +Date: Tue Jun 25 21:35:09 2013 +0100 + + sna: Rearrange tiled x upload so that damage accumulation is last + + Signed-off-by: Chris Wilson + +commit e033a28bcb37867f3c947475714e1ef45c868825 +Author: Chris Wilson +Date: Tue Jun 25 21:12:23 2013 +0100 + + sna: Optimize clears to white + + Signed-off-by: Chris Wilson + +commit b77c334a26c55d3028971897dcba21407a7a4743 +Author: Chris Wilson +Date: Tue Jun 25 19:08:30 2013 +0100 + + sna: Do not perform tiling inplace if the destination is busy + + Rather than waiting on the GPU stall, just use the standard mechanisms to + queue the uploads. + + Signed-off-by: Chris Wilson + +commit 4b0cdf28b884755cb842d3303fc0dd9bec62ab24 +Author: Chris Wilson +Date: Tue Jun 25 18:09:36 2013 +0100 + + sna: Be explicit when creating tiled-x pixmaps for manual tiling uplaods + + Signed-off-by: Chris Wilson + +commit 98feba417c87dce020df6a6ed157e3546591d8e7 +Author: Chris Wilson +Date: Tue Jun 25 18:35:45 2013 +0100 + + sna: Drop master when closing the screen + + As we reacquire master when initialisation the next gen of the server, + to keep the reference counting consistent we need to release our master + reference on CloseScreen. + + Signed-off-by: Chris Wilson + +commit febfd388235fbe566a505d7d83733305cf344850 +Author: Chris Wilson +Date: Tue Jun 25 18:05:28 2013 +0100 + + intel: Use the correct errno value for reporting the drmSetVersion failure + + Signed-off-by: Chris Wilson + +commit 2e2c448a77ab9dce4807b159708290cd7ad26b5c +Author: Chris Wilson +Date: Tue Jun 25 14:22:28 2013 +0100 + + sna: Don't flag IGNORE_CPU for partial overwritten blocks + + As we set the flags for the migration extents, but only operate upon the + boxes in the region, we need to be careful to be sure to migrate data + outside of the boxes overwritten. + + Fixes regression from + commit 94cbe7bf7b7acc9a7f2cb56c5e275af028f3cdc8 [2.21.10] + Author: Chris Wilson + Date: Thu Jun 20 19:40:44 2013 +0100 + + sna: Mark overwriting CopyArea as not needing the dst damage + + If we start passing around regions rather than extents, we coud do + finergrained migration decision. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55244 + Signed-off-by: Chris Wilson + +commit 27ebef515ebc034b9b41a0f3d26ad7e6f966305e +Author: Chris Wilson +Date: Mon Jun 24 13:31:25 2013 +0100 + + Add the nickle utility scripts to the tarball + + So that the tarball matches the git checkout. + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit c88d911d4209a8ede5ec705ad925383c69182977 +Author: Chris Wilson +Date: Mon Jun 24 14:30:00 2013 +0100 + + sna: Initialise gc->ops->PolyPoint for miWideDash + + The miWideDash may also call PolyPoint rather than emit spans, so make + sure that we correctly prepare sna_poly_point before calling mi*. + + Reported-by: Tobias Brodel + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66104 + Signed-off-by: Chris Wilson + +commit 72e8ab2b8f7aabee3bd891f08c64f5b2587da8e1 +Author: Chris Wilson +Date: Mon Jun 24 11:46:38 2013 +0100 + + sna: Remove unused brw_eu_debug.c + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit 6ca4ae441c61b1f425453cc443bb1d4d10d25aaa +Author: Chris Wilson +Date: Sun Jun 23 23:41:57 2013 +0100 + + sna: Check for a request to create an inactive scanout + + The combination is just about valid and used along some odd paths, so + replace the assertion with a regular checks. + + Signed-off-by: Chris Wilson + +commit b459ab9eeba4c865f15f0b3e28af318948b4adbd +Author: Chris Wilson +Date: Sun Jun 23 23:00:55 2013 +0100 + + sna: Move the reset bo to the right list + + Signed-off-by: Chris Wilson + +commit 77ddadf0ec6b867a0638660bf06c82ad31577795 +Author: Chris Wilson +Date: Sun Jun 23 22:01:12 2013 +0100 + + sna: Clear 'clear' hint upon uploading into tiled + + Fixes regression from + commit 53c113c3cc2f8527debc185f0819139ca8637637 [2.21.10] + Author: Chris Wilson + Date: Fri Jun 21 19:27:24 2013 +0100 + + sna: Allow PutImage to write inplace using manual tiling + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66059 + Signed-off-by: Chris Wilson + +commit d3de043d2de4aa11a85c56faf1658ec4c4699da2 +Author: Chris Wilson +Date: Sun Jun 23 21:30:56 2013 +0100 + + sna: Discard proxy upload buffers before overwritting for PutImage + + Signed-off-by: Chris Wilson + +commit d68d24dc3727dcc281bc9b45bc605874f3a3c4f2 +Author: Chris Wilson +Date: Sun Jun 23 19:08:32 2013 +0100 + + sna: Discard overwritten incomplete operations before migrating + + Signed-off-by: Chris Wilson + +commit 60dbd5a5b6cd56b7a33eac3afebe2d94ac8579c7 +Author: Chris Wilson +Date: Sun Jun 23 18:51:38 2013 +0100 + + sna: Document swizzling for DBG + + Signed-off-by: Chris Wilson + +commit fd375da5caf34f93a4e87670bb0c70fec5b4c55c +Author: Chris Wilson +Date: Sun Jun 23 17:06:11 2013 +0100 + + sna: Allow tiled uploads to accumulate damage + + And for the upload to create the bo as required. + + Signed-off-by: Chris Wilson + +commit b0e383363e8707c132a8a1748757d84120a99b31 +Author: Chris Wilson +Date: Sun Jun 23 10:55:21 2013 +0100 + + sna/gen5: Elide the forced flush after a drawrect + + Presume that the non-pipelined drawrect is sufficient to serialise + operations to the render cache. + + Signed-off-by: Chris Wilson + +commit 16fb786bd0791986fcac8b11a7e182090c5b6249 +Author: Chris Wilson +Date: Sun Jun 23 09:00:17 2013 +0100 + + sna/gen5: Force a write flush when changing blend modes + + Otherwise it appears that the hardware will readback from memory + bypassing its render cache after a change of modes. There is probably a + lot more subtly to it than this, but this appears to be a good first + approximation. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + Signed-off-by: Chris Wilson + +commit 9eabe28a4046b33772bcfe109346179b81294420 +Author: Chris Wilson +Date: Sat Jun 22 17:37:19 2013 +0100 + + Tidy version query for i915.ko + + Signed-off-by: Chris Wilson + +commit 7ec0378b64e88923ba1c4eba043488685aa3a795 +Author: Chris Wilson +Date: Sat Jun 22 17:30:02 2013 +0100 + + sna: Only open the /dev/dri/cardX device once + + Merge the device open in the main driver with the probing so that we can + open the path explicitly passed in by the PlatformProbe and keep that fd + around for the main driver and so avoid a later search. + + Signed-off-by: Chris Wilson + +commit 41badce186fe0f6e8f49e30b6c1c251027161e35 +Author: Chris Wilson +Date: Sat Jun 22 16:34:20 2013 +0100 + + sna: Add reference counting to drmMaster for Zaphod + + With Zaphod enabled, we will try to acquire/release the drmMaster + several times on each enter/leave VT. This obviously flags an error (and + drops the master too early), so track the number of references we still + hold for drmMaster. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=66041 + Signed-off-by: Chris Wilson + +commit 81b35092c39bf6d9851ac37da4b20358405cf314 +Author: Chris Wilson +Date: Sat Jun 22 09:22:45 2013 +0100 + + 2.21.10 release + +commit 5189ba727fe48990f00d5787c53d7b15fa1838a4 +Author: Chris Wilson +Date: Sat Jun 22 13:39:47 2013 +0100 + + sna: Refine the self-cow copy hack to reduce collateral damage + + Sergio Callegari found a case in LibreOffice that copied cloned pixmaps + onto each other and then modified one of the pair. This was triggering + the hack put in to speed up firefox scrolling, unfortunately. + + Reported-by: Sergio Callegari + References: https://bugs.freedesktop.org/show_bug.cgi?id=65665 + Signed-off-by: Chris Wilson + +commit 62e42de300275a668a326357d454062221714fe8 +Author: Chris Wilson +Date: Fri Jun 21 21:00:23 2013 +0100 + + sna: Determine swizzling once during initialisation and choose memcpy_to_tiled_x + + Signed-off-by: Chris Wilson + +commit 53c113c3cc2f8527debc185f0819139ca8637637 +Author: Chris Wilson +Date: Fri Jun 21 19:27:24 2013 +0100 + + sna: Allow PutImage to write inplace using manual tiling + + Signed-off-by: Chris Wilson + +commit 48028a7c923fa0d66b01e8e94d4f0742866f78ec +Author: Chris Wilson +Date: Fri Jun 21 14:29:43 2013 +0100 + + sna: Inspect availablity of render before prefering to use the GPU + + Signed-off-by: Chris Wilson + +commit 71fc83401ec8c560a89a284805e849954ea18ee4 +Author: Chris Wilson +Date: Fri Jun 21 14:28:38 2013 +0100 + + sna: Check if we may want to simply upload for a CopyArea + + Signed-off-by: Chris Wilson + +commit 7e90e522199c4d6b479554073acb33e9d82fb8cc +Author: Chris Wilson +Date: Fri Jun 21 14:27:42 2013 +0100 + + sna: Fix inspection of transfer extents for deciding transport + + Signed-off-by: Chris Wilson + +commit 94cbe7bf7b7acc9a7f2cb56c5e275af028f3cdc8 +Author: Chris Wilson +Date: Thu Jun 20 19:40:44 2013 +0100 + + sna: Mark overwriting CopyArea as not needing the dst damage + + Signed-off-by: Chris Wilson + +commit b3d1118bbee1172f72c946163a37ca4ad5feecce +Author: Chris Wilson +Date: Thu Jun 20 19:34:18 2013 +0100 + + sna: Promote the CopyArea to the GPU if it subsumes the CPU damage + + Signed-off-by: Chris Wilson + +commit 186ac909ad2099f834e7b2c513a02cd4d041327c +Author: Chris Wilson +Date: Thu Jun 20 15:32:30 2013 +0100 + + sna: Fix tiled scanout limits for Valleyview + + It appears that Valleyview shares the same scanout limits as gen4. + + Signed-off-by: Chris Wilson + +commit 112fc5f370f8daf267d7241ca2d669194abaa183 +Author: Chris Wilson +Date: Wed Jun 19 19:53:14 2013 +0100 + + sna: Tidy a redundant conditional for CopyArea + + Signed-off-by: Chris Wilson + +commit ba642d9ff86fcf8b0b758d65565e3b5b6293b667 +Author: Chris Wilson +Date: Wed Jun 19 16:27:36 2013 +0100 + + sna: Fix the pitch limits for gen3 scanout + + Signed-off-by: Chris Wilson + +commit 06679c1433cfb21ba925584700e2e97439fdf64a +Author: Chris Wilson +Date: Wed Jun 19 16:16:14 2013 +0100 + + Revert "sna: Apply scanout stride limits to tiling selection" + + This reverts commit cc08f6e0ef54744434fe0fd6d76348ee6099a62d. + + Prefer to keep the frontbuffer as tiled, and use an per-crtc pixmap in + case the frontbuffer is not suitable as the framebuffer. + +commit f165d2e21358703c5f4ed302a4a57219db482a59 +Author: Chris Wilson +Date: Wed Jun 19 16:15:32 2013 +0100 + + sna: Switch to a per-crtc pixmap if the pitch exceeds scanout limitations + + References: https://bugs.freedesktop.org/show_bug.cgi?id=65099 + Signed-off-by: Chris Wilson + +commit cc08f6e0ef54744434fe0fd6d76348ee6099a62d +Author: Chris Wilson +Date: Wed Jun 19 15:50:01 2013 +0100 + + sna: Apply scanout stride limits to tiling selection + + gen4 has a restricted DSPSTRIDE limit for tiled surfaces lower than the + maximum supported size of the CRTC. So we need to double check + whether tiling the scanout is supported before attempting to allocate a + tiled scanout. + + Reported-by: Paul Donohue + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65099 + Signed-off-by: Chris Wilson + +commit f95ed64a11339b801d655ee173f37e01727a4a87 +Author: Chris Wilson +Date: Wed Jun 19 14:47:46 2013 +0100 + + sna: Assert that the scanout fits within the allocated buffer + + Signed-off-by: Chris Wilson + +commit 6132400365f8f467d838ed26002e74412e1c7298 +Author: Jonathan Gray +Date: Wed Jun 19 11:30:24 2013 +0100 + + configure: test for librt (clock_gettime) + + clock_gettime() is in libc not librt on OpenBSD so check + to see if linking librt is required. + + Signed-off-by: Jonathan Gray + +commit f567f19b37d00131cda749e31c6d2dc8b52a1d62 +Author: Chris Wilson +Date: Tue Jun 18 22:17:11 2013 +0100 + + sna: Allow wedged pixmaps to be accessed via GTT + + Signed-off-by: Chris Wilson + +commit c3695c3c6b7bc13b5e642c9d92648e8228411bed +Author: Chris Wilson +Date: Tue Jun 18 09:41:20 2013 +0100 + + sna: Specialise mi calls to PolyFillRect + + Signed-off-by: Chris Wilson + +commit 40329e34b9ac65d930757d53283b7d8f4066c3a2 +Author: Chris Wilson +Date: Sat Jun 15 13:25:39 2013 +0100 + + sna: Add extra assertions to sanity check CPU access is coherent + + Signed-off-by: Chris Wilson + +commit abb522e07a2c3bf39e2587ddedc4bb8ac955c536 +Author: Chris Wilson +Date: Tue Jun 18 09:01:49 2013 +0100 + + sna: Do not sync after a failed mapping + + The domain update should be a redundant operation, causing needless + extra transitions. + + Signed-off-by: Chris Wilson + +commit 6086abca13efdeaf9b24c9fbe425546cbe2cfb12 +Author: Chris Wilson +Date: Mon Jun 17 22:44:58 2013 +0100 + + sna: Try falling back through an upload if inplace mapping fails + + Signed-off-by: Chris Wilson + +commit a86b217934a9a16843ac17b38cd5b61393f65aa0 +Author: Chris Wilson +Date: Tue Jun 18 09:45:08 2013 +0100 + + sna: Mark the base bo as unreusable for temporary mappings + + Update required after forcing unaligned userptr to use proxies. + + Signed-off-by: Chris Wilson + +commit ca913e8f1e4b113af3a30cca50679436df23bef1 +Author: Chris Wilson +Date: Mon Jun 17 22:44:20 2013 +0100 + + sna: Unwrap proxies for subpage offset SHM pixmaps during sync + + Signed-off-by: Chris Wilson + +commit d54049808daafed12cf99ff6a1a7395136ab1dc6 +Author: Chris Wilson +Date: Wed Jun 12 19:13:12 2013 +0100 + + sna: Refactor scanout flushing + + In preparation for extending the kernel interface to be more explicit + about when we need to flush a direct write to the scanout. + + Signed-off-by: Chris Wilson + +commit 7ebcf94736926d4c7bb5ba1627be0a62b15c1663 +Author: Chris Wilson +Date: Sat Jun 15 12:27:19 2013 +0100 + + sna: Be explicit in not marking an upload buffer as being on the cpu + + Since the upload buffer is special in that it simultaneously exists on + both the CPU and GPU, we need to be extremely careful in marking the cpu + hint flag and asserting it. In particular, the new stricter assert was + firing in the CompositeTrapezoids fallback path. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit cafa33a522ac634d465f24d0a1607516e65a0828 +Author: Chris Wilson +Date: Thu Jun 13 22:51:42 2013 +0100 + + sna/gen3+: Remove redundant clearing of clear hint in video playback + + The clear hint is correctly updated when performing the move-to-gpu and + so it is being superfluously repeated by the callers. + + Signed-off-by: Chris Wilson + +commit 45ca894bce73e199d679b9f147c52ada59e40ccb +Author: Chris Wilson +Date: Thu Jun 13 16:47:10 2013 +0100 + + sna: Tighten a few asserts on pixmap migration + + Tracking to track down where the CPU hint may be set to true but the + pixmap remain entirely damaged on the GPU. + + Signed-off-by: Chris Wilson + +commit 8f340f90f4b2f269d6308d0bd31fbc2a5f579608 +Author: Chris Wilson +Date: Thu Jun 13 16:08:49 2013 +0100 + + sna/gen7: Set sampler swizzle for video sources + + Otherwise the sampler on Haswell will just read all zeros when trying to + playback a video. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65699 + Signed-off-by: Chris Wilson + +commit 5f20be82563176c45a31a9676b68a3455566bc67 +Author: Chris Wilson +Date: Thu Jun 13 11:18:42 2013 +0100 + + sna/gen2+: Promote a conditional dirty into an assertion + + If the target bo is not bound when we start to emit the composite state + for the operation, we are screwed. + + Signed-off-by: Chris Wilson + +commit 6655cc1d9735a8433994c762583753b12e2125b4 +Author: Chris Wilson +Date: Wed Jun 12 18:44:27 2013 +0100 + + sna: Do not enlarge the read back region if there is already CPU damage + + We enlarge the read back into to minimise the number of times we have to + migrate pixmap data. However, if we then enlarge the read so that it + overwrites CPU dirty data, then we can introduce corruption. + + Signed-off-by: Chris Wilson + +commit 1f180b89db412c5fa9fe95c8f6634be33a1d8581 +Author: Chris Wilson +Date: Wed Jun 12 14:23:32 2013 +0100 + + sna/video: Free the private video (adaptor/port) arrays upon CloseScreen + + Signed-off-by: Chris Wilson + +commit 04ea469d4f30f9bb25561f3d04f1463999c8d928 +Author: Chris Wilson +Date: Wed Jun 12 14:20:10 2013 +0100 + + sna/video: Catch allocation failure whilst setting up the TexturedAdaptor + + Missing NULL check for calloc of the port private array. + + Signed-off-by: Chris Wilson + +commit dc8f2def5461c75fce6d648036a61186fd00d23f +Author: Chris Wilson +Date: Wed Jun 12 08:34:48 2013 +0100 + + sna: Allow the throttling to be woken by SIGINT + + Rather than completely starve X from handling input events and raising + the spectre of miEQ overflow, stop throttling upon SIGINT. We will have + waited a small period of time (~100ms) for the GPU to catch up, and will + do so again in the near future. This also preserves the hang detection. + + Signed-off-by: Chris Wilson + +commit 15b92c98755c709f41e59baeb206e5a3e56e3178 +Author: Chris Wilson +Date: Tue Jun 11 14:23:57 2013 +0100 + + sna: Make sure the source is coherent on the CPU before uploading + + Similar to 7d91051c, but along the render path rather than CopyArea. + + Makes the presumption that for the upload path the region is stored on + the CPU explicit. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=61628 + Signed-off-by: Chris Wilson + +commit 1392f296a3fc94bb64abe4c3370c2f3cd52bef9f +Author: Chris Wilson +Date: Tue Jun 11 15:10:06 2013 +0100 + + sna: Mollify an assert to allow us to call busy_ioctl on a GTT write + + The code was being careful in making sure that only a BO with an + outstanding GPU write was being flushed. We need to relax that + assertion to allow us to call busy_ioctl after only GTT writes. + + Signed-off-by: Chris Wilson + +commit 7d91051c50210560dbd93a9e36f30d9f74ce9133 +Author: Chris Wilson +Date: Tue Jun 11 14:23:57 2013 +0100 + + sna: Make sure the source is coherent on the CPU before uploading + + Makes the presumption that for the upload path the region is stored on + the CPU explicit. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=61628 + Signed-off-by: Chris Wilson + +commit 2e2db4b88f741ca6cd4312c6c5242261c5de4d06 +Author: Chris Wilson +Date: Tue Jun 11 00:49:35 2013 +0100 + + sna: Tidy batch submission around CRTC updates + + A few places we were redundantly submitting the same bo, and in others + doing more work than necessary. + + Signed-off-by: Chris Wilson + +commit b9439a56170c4732b340137d306933a742ee6ae9 +Author: Chris Wilson +Date: Mon Jun 10 22:56:20 2013 +0100 + + sna: Move the GTT dirty tracking from the pixmap to the bo + + This allows us to more accurately track when the GTT is dirty. However, + the only danger is that we may prematurely flush the scanout and clear + the dirty bit and not preserve the flush timer. + + Signed-off-by: Chris Wilson + +commit 5f0c5a49538d9995926b8dbda85c8e6d99496f17 +Author: Chris Wilson +Date: Mon Jun 10 22:48:03 2013 +0100 + + sna: s/bo->dirty/bo->gpu_dirty/ to avoid later confusion + + The next step is to introduce bo->gtt_dirty. + + Signed-off-by: Chris Wilson + +commit b44307753655fac985404c519a54ca65da323900 +Author: Chris Wilson +Date: Mon Jun 10 21:34:52 2013 +0100 + + sna: Make sure all sna_write_boxes* flag the GTT is dirty + + Better would be to start passing in the sna_pixmap so that we can mark + the GTT as dirty in a single location, and only if we do indeed then do + a GTT update or pwrite. + + Signed-off-by: Chris Wilson + +commit 005075de9d20fe7c2b9a6e184c912559929710ad +Author: Chris Wilson +Date: Mon Jun 10 14:50:47 2013 +0100 + + sna: Keep the cached EDID if it hasn't changed + + Rather than reparsing the EDID each time we probe the modes, if the + property hasn't changed keep it. + + Signed-off-by: Chris Wilson + +commit 3d760c9b32776bf2f1acde9256388769a9c5a398 +Author: Chris Wilson +Date: Wed Jun 5 12:52:11 2013 +0100 + + sna: Streamline connector probing + + This is a tidy up in preparation for a more controversial patch. In the + meantime, take advantage of information that remains static over the + lifetime of our connectors. + + Signed-off-by: Chris Wilson + +commit b584162e387187a7cdb7f46a3a151e00e7d3de58 +Author: Chris Wilson +Date: Fri Jun 7 16:32:40 2013 +0100 + + sna: Set the needs_flush flag on the bo when the scanout is dirty + + Since the call to the busy_ioctl is predicated on whether the bo needs + to be flushed by us, therefore when forcing the call to the busy_ioctl + to flush the GTT we need to mark it as requiring needs_flush. + + Signed-off-by: Chris Wilson + +commit 7151e437df4437df35a67ae125607e665c66353c +Author: Chris Wilson +Date: Fri Jun 7 16:09:18 2013 +0100 + + sna: Track when we write directly to bo through the GTT + + In the future, we may need to explicitly flush GTT writes to the + scanout, so add the infrastructure to do so now. + + Signed-off-by: Chris Wilson + +commit 79145b70a7bda2941059ce7e630f84e2b24b465a +Author: Chris Wilson +Date: Fri Jun 7 15:33:51 2013 +0100 + + sna/dri: Check rather than assert for a change in back/front sizes + + The DRI2 midlayer may, or may not, recreate the back buffer after a + pixmap change. The result is that the back buffer may or may not be + flagged as unsuitable for flipping, so be paranoid and double check. + (This behaviour was first introduced in 1.9.0 and looks to be removed + again in 1.15.0) + + Signed-off-by: Chris Wilson + +commit 2f91643cde954c23633c6f91940f7216796b949c +Author: Chris Wilson +Date: Fri Jun 7 14:50:55 2013 +0100 + + sna/dri: Fix transcription error in commit ab47433b20 + + Reversed a predicate causing it to fail to blit when it had a + drawable (and worse dereferencing a NULL pointer) instead of terminating + when the Drawable was gone. + + Signed-off-by: Chris Wilson + +commit e85271e516f811c60f440de61995cc5baf469a47 +Author: Chris Wilson +Date: Fri Jun 7 13:35:48 2013 +0100 + + sna/dri: Do not decouple the flip after chaining up a blit + + Fixes regression from previous patch. + + Signed-off-by: Chris Wilson + +commit ab47433b20a623bf790acfbf2005a8782d177f64 +Author: Chris Wilson +Date: Thu Jun 6 23:15:14 2013 +0100 + + sna/video: Select vsync by default based on "SwapbuffersWait" + + To be strictly identical to the DRI code, we should override the user + when the option is set. However, this a baby step for simple bug + testing. + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1176647 + Signed-off-by: Chris Wilson + +commit 7e1e18aca214a8705270972131a1800c81bc3b4d +Author: Chris Wilson +Date: Thu Jun 6 21:40:30 2013 +0100 + + sna/video: Fixup formats to select visuals + + Fixes regression from + commit 195a51353c3af7bd253227da5f759f06cea01f73 [2.21.8] + Author: Chris Wilson + Date: Tue Apr 9 19:13:46 2013 +0100 + + sna/video: Convert to a pure Xv backend + + Reported-by: Edward Sheldrake + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65479 + Signed-off-by: Chris Wilson + +commit 0869acc0a6a5b92f5528049d2bd5ec62121ba114 +Author: Chris Wilson +Date: Thu Jun 6 21:21:24 2013 +0100 + + sna/dri: Make the fallback blit async again + + Previously it was async, and is likely to be anyway as the pageflip + failed due to the change in output. To be safe, once again request that + the copy does not stall the GPU upon the scanline window. + + Signed-off-by: Chris Wilson + +commit 9b52c852aaf42dde3a7f29c065e4d5230eac7a64 +Author: Chris Wilson +Date: Thu Jun 6 16:40:01 2013 +0100 + + sna/dri: Handle fast double flips across mode changes + + The tricky nature of the double flip is that there is no SwapComplete + pending and so we must avoid calling it under such circumstances. + + Signed-off-by: Chris Wilson + +commit 0da5cc23b18d4e2473a3b6a571fb49d08bb1dd2d +Author: Chris Wilson +Date: Thu Jun 6 14:11:50 2013 +0100 + + sna: Fix format specifier for mismatching int/long in DBG + + Signed-off-by: Chris Wilson + +commit 2770655371954413c750b030c9a7135baee302d4 +Author: Chris Wilson +Date: Thu Jun 6 12:04:23 2013 +0100 + + 2.21.9 release + +commit d3345cd269dc75999b35f3286d21059974dcb24b +Author: Chris Wilson +Date: Thu Jun 6 12:18:32 2013 +0100 + + sna: Only emit an error for terminal mmap failures + + If we repeat the mmap, keep quiet. Only emit the ErrorF in case even the + repeated attempts to mmap the bo fail. + + Signed-off-by: Chris Wilson + +commit 70fa080d02bff9742523cea52c875d9447a78bfd +Author: Chris Wilson +Date: Wed Jun 5 23:32:01 2013 +0100 + + sna: Include the GT details in the backend name for a chipset + + Signed-off-by: Chris Wilson + +commit 45c09bfe58c37bbf7965af25bdd4fa5c37c0908f +Author: Rodrigo Vivi +Date: Wed Jun 5 13:07:13 2013 -0300 + + Add more correct names for Haswell. + + As we find out more of the final product names for Haswell chipsets, we + need to update the user visible identification strings. + + Signed-off-by: Rodrigo Vivi + +commit a9f9fb8e44bb0bdbd004da1fce986585ebcafd28 +Author: Chris Wilson +Date: Wed Jun 5 09:48:19 2013 +0100 + + sna/video: Fix redundant initialisation of video->clip + + It will be created before use anyway, but this silences a compiler + warning. + + Signed-off-by: Chris Wilson + +commit 5d0ae71f1d667759ed4cfd2b7e793a08b8e3702c +Author: Chris Wilson +Date: Wed Jun 5 09:12:48 2013 +0100 + + sna: Do not conflate ignoring an output with an allocation failure + + If the user explicitly ignores an output through xorg.conf, then + xf86OutputCreate returns NULL. This is not to be confused with an + allocation error that also returns NULL. The latter is terminal, the + former is desired. + + Fixes regression from commit a9acc8dbb436e1e523e7d7c0f3c41946a2d0f245 + Author: Chris Wilson + Date: Thu May 30 12:09:52 2013 +0100 + + sna: Cleanup up error reporting after failure to init KMS interface + + Reported-by: David Rosca + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65381 + Signed-off-by: Chris Wilson + +commit 6dacaddb6a28670a52cead4b62c056a8acde8f3a +Author: Chris Wilson +Date: Mon Jun 3 15:34:37 2013 +0100 + + sna: Always populate the CPU features string + + So that we don't print random contents of the stack on ancient 32-bit + CPUs with no extended instruction sets. + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1186800 + Signed-off-by: Chris Wilson + +commit 8a88c01c3737a3570628600b1ab51938f82e226d +Author: Chris Wilson +Date: Mon Jun 3 14:14:09 2013 +0100 + + sna: Make copying the glyph size more compact + + The assembly was ugly with an unwarranted AGU stall. + + Signed-off-by: Chris Wilson + +commit 66ad4d6f3c990bd40d816b4a22122bbf64786e4c +Author: Chris Wilson +Date: Sun Jun 2 12:13:46 2013 +0100 + + sna/dri: Undo any COW before performing a copy with DRI2CopyRegion + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65250 + Signed-off-by: Chris Wilson + +commit 9a8ff7861c50b2f8698a968a011d5d833c7d5975 +Author: Chris Wilson +Date: Sun Jun 2 12:13:28 2013 +0100 + + sna: Add some more DBG hints to copy-on-write cloning + + Signed-off-by: Chris Wilson + +commit c4ad7b14ca71b95af83864b05793ea357f48bb88 +Author: Chris Wilson +Date: Sat Jun 1 16:58:15 2013 +0100 + + sna: Prevent adding damage to an already all-damaged GPU bo + + Keep the bookkeeping straight after propagating the source clear colour: + commit 810a0ce2f89ba6b343b5043963626c0f2d50fb22 [2.21.7] + Author: Chris Wilson + Date: Fri May 10 12:02:10 2013 +0100 + + sna: Propagate clear color when replacing by a CopyArea + + Reported-by: Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65247 + Signed-off-by: Chris Wilson + +commit be84b6929705584f30b63d6e613ff3d8e6e3dc1d +Author: Chris Wilson +Date: Sat Jun 1 16:51:38 2013 +0100 + + sna/dri: Reorder assert not to fail on a pageflip deferred to after a modeset + + Signed-off-by: Chris Wilson + +commit 2e11b520bbdb1af7e977db7fdef2d4c41242d56f +Author: Chris Wilson +Date: Thu May 30 15:34:08 2013 +0100 + + sna: Compile fix for non-debug builds + + sna_display.c: In function 'get_fb': + sna_display.c:181:3: warning: implicit declaration of function 'assert_scanout' [-Wimplicit-function-declaration] + sna_display.c:181:3: warning: nested extern declaration of 'assert_scanout' [-Wnested-externs] + + * sigh + + Signed-off-by: Chris Wilson + +commit 3a9975729c665cd09a33e33eab608350aaee8160 +Author: Chris Wilson +Date: Thu May 30 14:15:23 2013 +0100 + + sna: Restore GPU promotion for large fills + + Fix another regression from + commit ef9dc6fae585d5616446eedc1e6e91173f4064c1 [2.21.7] + Author: Chris Wilson + Date: Mon May 20 11:08:51 2013 +0100 + + sna: Undo a few more overwritten operations upon a bo + + The REPLACES predicate was meant to complement the existing tests, not + be compulsory. + + Found whilst investigating why performance seemed to have dropped off in + Phoronix's benchmarks. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 08b33ba8f12bb4bc425ca1bc40e2660e446e2c65 +Author: Chris Wilson +Date: Thu May 30 14:57:56 2013 +0100 + + sna: Assert that an existing scanout is the desired size + + Signed-off-by: Chris Wilson + +commit a9acc8dbb436e1e523e7d7c0f3c41946a2d0f245 +Author: Chris Wilson +Date: Thu May 30 12:09:52 2013 +0100 + + sna: Cleanup up error reporting after failure to init KMS interface + + Signed-off-by: Chris Wilson + +commit f4fcb0e7d24a104afb642dd8819e67ffcaafbfb1 +Author: Chris Wilson +Date: Thu May 30 12:02:44 2013 +0100 + + sna: Report allocations failures during Screen initialisation + + Just abort instead of trying to limp on if we fail to even allocate + memory during initialisation. + + Signed-off-by: Chris Wilson + +commit 7f7c8087db6af58109e791763fe33582a1559646 +Author: Chris Wilson +Date: Wed May 29 12:25:37 2013 +0100 + + sna: Log which outputs are being configured during a modeset + + Signed-off-by: Chris Wilson + +commit fc1e0702b25e647cb423851fb7228989fec28bd6 +Author: Daniel Vetter +Date: Wed May 29 11:25:28 2013 +0100 + + sna: fixup up possible_clones kms->X impedance mismatch + + We need to be a notch more careful with remapping the possible clones + mask from the kernel: + - SDVO and Haswell DDI have multiple connectors mapping to the same encoder. + - The connector list can be reordered compared to the encoder list. + This is used to move eDP/LVDS to the front. + + Also add even more debug output. + + Signed-off-by: Daniel Vetter + +commit b7aa05e44b1f88284183c1c73bb074dd5dce74cb +Author: Chris Wilson +Date: Tue May 28 23:01:30 2013 +0100 + + sna: Sanity check that CRTC / output combination is valid + + Signed-off-by: Chris Wilson + +commit b507796679529b14c99e8937870561cd8eebebb9 +Author: Chris Wilson +Date: Tue May 28 12:13:02 2013 +0100 + + Add the known marketing names for the performance Haswell parts + + Start filling in the names for the parts that have been announced, the + Iris branded Haswell GT3 parts. + + Signed-off-by: Chris Wilson + +commit b3169768ddf8c8977d2ace3675611b5ec6eba7ee +Author: Chris Wilson +Date: Tue May 28 12:02:56 2013 +0100 + + sna: Make the backend identifier more informative + + This is useful, for example, with the multiple gen7 variants. + + Signed-off-by: Chris Wilson + +commit 0839e3316a02380cd64d354ee0ec9d4c2b8eecf4 +Author: Chris Wilson +Date: Tue May 28 11:18:14 2013 +0100 + + sna: Call mode update after disabling outputs upon VT switch + + Perform a second sanity check that all the outputs we expect to be + active remain so following the cleanup after VT switching. + + Signed-off-by: Chris Wilson + +commit 7d64f596b895071ea253481c97275bf551c013e9 +Author: Chris Wilson +Date: Mon May 27 21:13:40 2013 +0100 + + test: Add an easily visible tearing test for video playback + + Contributed by Matti Hamalainen. + +commit f38d037b94aacdccb2aaa058bbe48d1c8079d604 +Author: Chris Wilson +Date: Mon May 27 21:07:20 2013 +0100 + + sna/video: Correct interpretation of 'sync' + + The 'sync' parameter past along XvPutImage is not a request for us to + perform the operation synchronised to the vblank, rather a hint that the + client wishes the operation to be synchronous. In Xorg, this is + implemented as an immediate ShmCompletion event so make sure we flush + the operation to hw in this case. + + Fixes regression from + commit 195a51353c3af7bd253227da5f759f06cea01f73 [2.21.8] + Author: Chris Wilson + Date: Tue Apr 9 19:13:46 2013 +0100 + + sna/video: Convert to a pure Xv backend + + Reported-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65048 + Signed-off-by: Chris Wilson + +commit 7e7d0ad15bafc4624f8c2ccf73c08ead5cc6fd6a +Author: Chris Wilson +Date: Mon May 27 13:41:13 2013 +0100 + + 2.21.8 release + +commit 51103d8637ba34a0d5f3507e196f54333aa765bb +Author: Chris Wilson +Date: Sat May 25 15:53:11 2013 +0100 + + sna: Free the released COW reference when uncloning + + Reported-by: Jiri Slaby + Reported-by: David Gow + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64978 + Signed-off-by: Chris Wilson + +commit fce4292ab7216a1c610ffc57aa6763e05b458904 +Author: Chris Wilson +Date: Fri May 24 15:15:13 2013 +0100 + + sna: Fix cut'n'paste compile error from previous commit + + Always check for outstanding diff before pushing. + + Signed-off-by: Chris Wilson + +commit e2e139923dd000f13602e51d94bc8a265b5e234f +Author: Chris Wilson +Date: Fri May 24 15:08:13 2013 +0100 + + sna: Log when the framebuffer changes size + + Signed-off-by: Chris Wilson + +commit 820f97ede7a38015a781de72cc265b0b65f86415 +Author: Chris Wilson +Date: Fri May 24 14:38:06 2013 +0100 + + sna: Reorder cleanup of flush list and CPU bo to silence an assertion + + Keep the bookkeeping in order. + + Signed-off-by: Chris Wilson + +commit 79e98ea6448f666d1a6dcca19bfe0e84fb62dd46 +Author: Chris Wilson +Date: Fri May 24 13:08:26 2013 +0100 + + sna: Reenable COW support + + Accidentally left it disabled whilst testing. + + Signed-off-by: Chris Wilson + +commit f6c35e58c1bb94ccfa04723db76d7164d5772f11 +Author: Chris Wilson +Date: Fri May 24 12:43:16 2013 +0100 + + sna: Do not undo a bo if we may fallback + + If we undo the pending operations to a bo, then fallback we cause + corruption. For example, see wine and its 1-bit rendering. + + Fixes regression from + commit 07a4400fffe4f83df3debe62abd2c37b45f8f0c0 [2.21.7] + Author: Chris Wilson + Date: Fri May 10 11:59:59 2013 +0100 + + sna: Attempt to discard overwritten operations before CopyArea + + Also we need to be more careful and consider alu when marking the + operation as 'replaces'. + + Signed-off-by: Chris Wilson + +commit 818702d3dc48964e4fd11afe8f2fce431ae913c0 +Author: Chris Wilson +Date: Fri May 24 12:15:42 2013 +0100 + + sna: Discard COW before migrating CPU damage to the GPU + + At that point, the GPU bo will no longer be a clone of the source and so + we need to decouple it and make ourselves a fresh copy. + + Signed-off-by: Chris Wilson + +commit 2b9723767612702f4cfa2f73ffced83c46eccddf +Author: Chris Wilson +Date: Fri May 24 11:46:36 2013 +0100 + + sna: Do make a clone of a GPU bo that is itself a cache + + As we do not attempt to undo the cache status upon the clone. + + Signed-off-by: Chris Wilson + +commit dbe2b5896ec2cd00a456236467b221c9fafdd2f7 +Author: Chris Wilson +Date: Fri May 24 12:03:41 2013 +0100 + + sna: Correct assertion for reusing COW + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 2005b273e10f2b946f79c602b55a7bf585c936de +Author: Chris Wilson +Date: Fri May 24 11:02:20 2013 +0100 + + sna: Check for NULL damage before dereferencing + + Fixes regression from + commit 16a64649e9c440ab9457467fe04be25719a73e7c [2.21.7] + Author: Chris Wilson + Date: Fri May 10 15:48:58 2013 +0100 + + sna: Basic copy-on-write support for cloning pixmaps + + Reported-by: Axel Rohde + Signed-off-by: Chris Wilson + +commit ee7ea10148b7843091c3fa103f9f4476979f8b68 +Author: Chris Wilson +Date: Thu May 23 12:55:21 2013 +0100 + + sna: Only flags the PolyFillRect as REPLACES if it is unclipped + + Otherwise we discard a fill operation that is required to initialise the + pixmap before drawing commences. + + Fixes regression from + commit ef9dc6fae585d5616446eedc1e6e91173f4064c1 [2.21.7] + Author: Chris Wilson + Date: Mon May 20 11:08:51 2013 +0100 + + sna: Undo a few more overwritten operations upon a bo + + Reported-by: Matti Hamalainen + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64841 + Signed-off-by: Chris Wilson + +commit 87295b1ef85505689ce326137c2794230fb3f35f +Author: Chris Wilson +Date: Wed May 22 09:43:16 2013 +0100 + + sna: Remove the overzealous assert + + IGNORE_CPU is sometimes only set when there is CPU damage to ignore... + + Signed-off-by: Chris Wilson + +commit f2e0454f2df4289521b24de41fb41c68f7abf0ed +Author: Chris Wilson +Date: Wed May 22 08:58:51 2013 +0100 + + sna: Fix DBG typo and so fix build with --enable-debug + + s/hint/flags/ -- used the wrong variable name in an assert and upset the + compiler. + + Signed-off-by: Chris Wilson + +commit abe85adda51c58d3f3b9c5dea6cec4b13a65cdcd +Author: Chris Wilson +Date: Tue May 21 13:39:35 2013 +0100 + + sna: Warn about the consequences of disabling tiling + + Signed-off-by: Chris Wilson + +commit 195a51353c3af7bd253227da5f759f06cea01f73 +Author: Chris Wilson +Date: Tue Apr 9 19:13:46 2013 +0100 + + sna/video: Convert to a pure Xv backend + + This is to enable feature work which requires access to Client state. + + Signed-off-by: Chris Wilson + +commit 8e42637050275945200797538a34c13c90b295cc +Author: Chris Wilson +Date: Tue May 21 11:13:03 2013 +0100 + + sna: Re-enable read-read optimisations + + Coacher is optimistic that the issue is no longer reproducible on his + machine - and whilst I do not understand the root cause, I am confident + that the kernel code is correct as is our use. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=61628 + Signed-off-by: Chris Wilson + +commit e65ee10dfd7155230ac18a6d24a67b68336dc973 +Author: Chris Wilson +Date: Tue May 21 11:01:50 2013 +0100 + + 2.21.7 release + +commit ef9dc6fae585d5616446eedc1e6e91173f4064c1 +Author: Chris Wilson +Date: Mon May 20 11:08:51 2013 +0100 + + sna: Undo a few more overwritten operations upon a bo + + Signed-off-by: Chris Wilson + +commit d6c30d1d4df6bcdfa075bd29da7c8aabee20774c +Author: Chris Wilson +Date: Fri May 17 12:11:34 2013 +0100 + + sna: Clear the cow_list when discarding the clone upon pixmap destroy + + Signed-off-by: Chris Wilson + +commit 21f17455650d52848467290f609c678e85b8ceab +Author: Chris Wilson +Date: Fri May 17 11:46:16 2013 +0100 + + sna: Add the missing ref(bo) when undoing the source clone + + Signed-off-by: Chris Wilson + +commit ee166ca856ac02ca8900b9ff44ed3899add2c72a +Author: Chris Wilson +Date: Fri May 17 11:30:03 2013 +0100 + + sna: Undo the clone when replacing the DRI pixmap + + Signed-off-by: Chris Wilson + +commit 8d31fe771b423a3768cbd05db994d49e941369e1 +Author: Chris Wilson +Date: Fri May 17 11:14:34 2013 +0100 + + sna: Transfer ownership of the cloned bo to the pixmaps + + Fix the leak from the previous commit. + + Signed-off-by: Chris Wilson + +commit 5d9315873e02d4acc5ddffc698dbf8984cbd5c42 +Author: Chris Wilson +Date: Fri May 17 10:51:44 2013 +0100 + + sna: Avoid replacing pinned bo when undoing a clone + + Otherwise we end up cloning the scanout only to leave it dangling if the + client copies the from the front-buffer and then writes to it. + + Reported-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64675 + Signed-off-by: Chris Wilson + +commit 3efe143e367acfa2ff38c63388d24a8d06331944 +Author: Chris Wilson +Date: Fri May 17 10:30:51 2013 +0100 + + sna: Clear mapped hints upon cloning a pair of pixmaps + + Once cloned, we do not want to use inplace operations and instead force + a copy. However, if we do not relinquish the hints when copying across + the bo, then those hints become stale and lead to corruption. + + Signed-off-by: Chris Wilson + +commit f57a65c35268f215c17f1a02b3af50a6678ce3c1 +Author: Chris Wilson +Date: Tue May 14 16:15:57 2013 +0100 + + sna: Correct assertions to allow discarding of cpu hint for inplace ops + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit bb0969e6a5c2bddcd0499d81c0c241003f8b07ef +Author: Chris Wilson +Date: Tue May 14 15:22:59 2013 +0100 + + sna: Assert that the mapping is released before closing the GEM handle + + Signed-off-by: Chris Wilson + +commit 16a64649e9c440ab9457467fe04be25719a73e7c +Author: Chris Wilson +Date: Fri May 10 15:48:58 2013 +0100 + + sna: Basic copy-on-write support for cloning pixmaps + + Signed-off-by: Chris Wilson + +commit d89b2647dc0b72d6fa6ff89065acd3776b04cd3f +Author: Chris Wilson +Date: Fri May 10 18:17:24 2013 +0100 + + sna: Propagate clears when using the BLT composite routines + + Signed-off-by: Chris Wilson + +commit 810a0ce2f89ba6b343b5043963626c0f2d50fb22 +Author: Chris Wilson +Date: Fri May 10 12:02:10 2013 +0100 + + sna: Propagate clear color when replacing by a CopyArea + + Signed-off-by: Chris Wilson + +commit 07a4400fffe4f83df3debe62abd2c37b45f8f0c0 +Author: Chris Wilson +Date: Fri May 10 11:59:59 2013 +0100 + + sna: Attempt to discard overwritten operations before CopyArea + + Signed-off-by: Chris Wilson + +commit 3ee42de066e4629f78e254c27d07dc33e16dbc02 +Author: Rodrigo Vivi +Date: Mon May 13 17:56:30 2013 -0300 + + Adding more reserved PCI IDs for Haswell. + + As Chris mentioned there is a tendency for us to find out more + PCI IDs only when users report. So let's add all new reserved Haswell IDs. + I didn't have better names for this reserved ids and didn't want to use rsvd1 + and rsvd2 groups, so I decided to use "B" and "E" that stands for the last + id digit. + + Cc: Chris Wilson + Signed-off-by: Rodrigo Vivi + +commit ee96de8b1e7e4a305ee31c0ece1d9d38df8328f9 +Author: Rodrigo Vivi +Date: Mon May 13 17:56:29 2013 -0300 + + Fix Haswell GT3 names. + + When publishing first HSW ids we weren't allowed to use "GT3" codname. + But this is the correct codname and Mesa is using it already. + So to avoid people getting confused why in Mesa it is called GT3 and here + it is called GT2_PLUS let's fix this name in a standard and correct way. + + Signed-off-by: Rodrigo Vivi + +commit 979d2f8d0038aa621e1c75200b10a3819e024a66 +Author: Chris Wilson +Date: Mon Apr 22 18:00:32 2013 +0100 + + sna/gen4: Tidy testing for an active vertex buffer id + + Signed-off-by: Chris Wilson + +commit 7ba63307058337af5a120ad01c93b423a3e422eb +Author: Chris Wilson +Date: Mon Apr 22 17:43:21 2013 +0100 + + sna/gen4: Drop unused gen parameter to SF state setup + + Signed-off-by: Chris Wilson + +commit 2217f6356b53263b6ce8f92b5c29c0614d4ef2a5 +Author: Chris Wilson +Date: Thu May 9 13:46:11 2013 +0100 + + sna/trapezoids: Fix the determination of the trapezoid origin + + "src-x and src-y register the pattern to + the floor of the top x and y coordinate of the left edge of the + first trapezoid," + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1178020 + Signed-off-by: Chris Wilson + +commit 6e98df06fa9d218a6139730140a83a1940b05980 +Author: Chris Wilson +Date: Thu May 9 13:45:38 2013 +0100 + + sna: Add more debugging to unaligned trapezoids + + Signed-off-by: Chris Wilson + +commit 5d62ec25937ad296114bf890a7a5ac11ff03508c +Author: Chris Wilson +Date: Thu May 9 13:44:24 2013 +0100 + + sna/gen7: Add DBG for channel setup for render source + + Signed-off-by: Chris Wilson + +commit debdcd6a09464251324238ccbd935a6ade265d94 +Author: Chris Wilson +Date: Thu May 9 13:43:57 2013 +0100 + + sna: Add DBG statements for choice of spans vertex emitter + + Signed-off-by: Chris Wilson + +commit c6e4088dcb261d89fa0065eb7d9b62eada049dbd +Author: Chris Wilson +Date: Thu May 9 11:30:05 2013 +0100 + + sna: Handle cached upload buffers for partial migration to GPU + + Since the extended use of move_area_to_gpu for partial migration of + render sources, we exposed the lack of handling of upload caches along + that path. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 262ee1ef1e98cb84fa0af6e679c8cd61dc93f008 +Author: Chris Wilson +Date: Tue May 7 10:35:53 2013 +0100 + + sna: Do not attempt to clean an active scanout + + For simplicity, skip buffers that are still in use by the batch - they + will be removed later. + + Signed-off-by: Chris Wilson + +commit 5637c173f85a5bb9a77572e4c070e0d612e6f49d +Author: Chris Wilson +Date: Wed May 1 15:14:55 2013 +0100 + + sna: Be careful not to preemptively upload portions of a SHM pixmap + + Only upload the portion of the pixmap being used for this rendering + operation, as outside of that may remain undefined and to be written by + the client before a future operation. + + Signed-off-by: Chris Wilson + +commit ca4a32c20d4c1f91552c02b9008ae16435b92d71 +Author: Chris Wilson +Date: Wed May 1 10:18:23 2013 +0100 + + sna: Page align requests to userptr + + Signed-off-by: Chris Wilson + +commit ab576a42650d8a743dd91108f774c220d866de95 +Author: Chris Wilson +Date: Sat Apr 27 12:06:30 2013 +0100 + + Add all reserved PCI-IDs for Haswell + + There is a tendency for a product to ship based on a 'reserved' PCI-ID + prior to us being notified about it. In other words, the first we find + out about such a product is when customers start complaining about their + shiny new hardware not being supported... + + References: https://bugs.freedesktop.org/show_bug.cgi?id=63701 + Signed-off-by: Chris Wilson + +commit 7dfb359677027310f4617b49f3da2321727a076f +Author: Chris Wilson +Date: Fri Apr 26 13:20:36 2013 +0100 + + uxa/dri: Fix compile error for unknown 'bool' + + It appears that it is only accidentally pulled in on some systems, but + not all. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63957 + Signed-off-by: Chris Wilson + +commit 8eaafdb43998b5cdefb20b8098c558fa5decb115 +Author: Chris Wilson +Date: Wed Apr 24 15:48:14 2013 +0100 + + sna: Prevent accessing an uninitialised region in move_area_to_gpu() + + If we skip the migration, we need to avoid using the unitialiased + region. There is no bad consequence as both branches of the if are + no-ops, but it does silence the static checkers and should make the + predicate cheaper. + + Signed-off-by: Chris Wilson + +commit b4871f1dac3d3c8d81101ef0f29eb69099ff2dcf +Author: Chris Wilson +Date: Thu Apr 18 09:51:39 2013 +0100 + + sna: Rephrase initialisation without a specific backend + + "generic" sounds more impressive than "no" + + Signed-off-by: Chris Wilson + +commit 6668f68054cb33e0cd3425f5403d14092a4a17f8 +Author: Chris Wilson +Date: Wed Apr 17 15:32:49 2013 +0100 + + Revert "xgvevent" + + This reverts commit ddd75d6539dcf692cb76747cd63d1f301180f18a. + + This is a WIP patch, not ready for upstream. The danger of mixing topic + branches. + +commit 1bf0d869ae07ffc5b9cd79904b421cd37997ae8c +Author: Chris Wilson +Date: Wed Apr 17 15:24:10 2013 +0100 + + Prefer i830_dri.so for gen2 chipsets + + Probe for i830_dri.so and, if it exists, use that driver in preference + to i915_dri.so for DRI (i.e. GL clients). This was suggested in the + context of distributions supplying i915g as the main DRI driver for + gen3, in which case we need to provide a separate DRI driver for gen2. + + Signed-off-by: Chris Wilson + +commit ddd75d6539dcf692cb76747cd63d1f301180f18a +Author: Chris Wilson +Date: Tue Apr 9 19:13:46 2013 +0100 + + xgvevent + +commit ddd3cc4ed6ac9b69f178147b49628b7a7f3f3104 +Author: Chris Wilson +Date: Tue Apr 16 11:55:23 2013 +0100 + + sna: Add VALGRIND_CFLAGS whilst compiling with --enable-valgrind + + Signed-off-by: Chris Wilson + +commit f0b6ae2cfb811a8c234634c878800ca1fb95703f +Author: Chris Wilson +Date: Mon Apr 15 11:42:20 2013 +0100 + + sna: Only release the scanout cache whilst DRM_MASTER + + If we try to release the framebuffers whilst not DRM_MASTER, the + operation will fail and we will leak the buffers. So do not bother + during the normal expiration to clean the scanout cache if vt switched + away. + + Signed-off-by: Chris Wilson + +commit d68270ca84dc01a930c2ed0c05cecfac88c8cc4b +Author: Chris Wilson +Date: Fri Apr 12 14:48:04 2013 +0100 + + sna/xvmc: silence a compiler warning + + sna_video_hwmc.c: In function 'create_context': + sna_video_hwmc.c:95: warning: assignment from incompatible pointer type + + Signed-off-by: Chris Wilson + +commit a64490c794e2e98c77e0c7f9cec6778fd1e06465 +Author: Chris Wilson +Date: Fri Apr 12 14:28:18 2013 +0100 + + sna: Add missing ';' + + Signed-off-by: Chris Wilson + +commit 9dae6f9f1f169c228929185a8bd94e82afe92574 +Author: Chris Wilson +Date: Fri Apr 12 11:01:08 2013 +0100 + + sna: Flush the scanout cache after resizing the display + + And ensure that any new scanout allocations make the requested size. + + Signed-off-by: Chris Wilson + +commit 97fc1d4c5bd268f331aaa9f7144e4fe40837fbb0 +Author: Chris Wilson +Date: Fri Apr 12 10:23:43 2013 +0100 + + sna/gen5: Force a MI_FLUSH between using the BLT and RENDER engines + + There is a workaround that says the first RENDER command following use of + the BLT should be a non-pipelined command. To be safe, emit a MI_FLUSH + before setting up the invariants. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1168066 + Signed-off-by: Chris Wilson + +commit aff14a23f98b1230a9053a1b8434f5cc9f766d14 +Author: Chris Wilson +Date: Fri Apr 12 09:49:47 2013 +0100 + + sna: Refine assertion about the existence of CPU damage when GPU damaged + + One particular buffer type is quite cunning and simultaneously sets both + CPU/GPU as all damaged (the upload buffer) so be aware when making bold + assertions. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit afe61281d8f92d6eb841e2522ab18e0d2fe73773 +Author: Chris Wilson +Date: Wed Apr 10 12:13:37 2013 +0100 + + sna/gen7: Cache our kernels in L3 + + Signed-off-by: Chris Wilson + +commit caf3118f90bad7f88f5f08e49177a1696bf97ccb +Author: Chris Wilson +Date: Wed Apr 10 12:16:34 2013 +0100 + + sna: Align uploads to start on page boundaries + + This reduces the number of loops and restarts required in the kernel. + + Signed-off-by: Chris Wilson + +commit 092e30de8a3476ab99446264edaf9b250a41736b +Author: Chris Wilson +Date: Tue Apr 9 20:43:19 2013 +0100 + + sna/xvmc: Wrap each output adaptor + + Each of the overlay, sprite and textured video can support XvMC + passthrough, so we need to setup an XvMC adaptor for each of our Xv + adaptors. + + Signed-off-by: Chris Wilson + +commit 540802595fee7f8b2c73e74c2b44e9a21f6471ae +Author: Chris Wilson +Date: Wed Apr 10 10:33:48 2013 +0100 + + sna: Suppress hotplug events whilst VT switched away + + Whilst we are not DRM master, not only is another server in control of + the outputs and responding to the udev event, we ourselves cannot + change modes and just cause contention upon the DRM device. Instead + inform userspace of the change as soon as we are DRM master again and + back in control. + + Signed-off-by: Chris Wilson + +commit 7afe2b45556f07b7e3a36e36da5a6d1c60366c25 +Author: Chris Wilson +Date: Tue Apr 9 20:57:23 2013 +0100 + + sna: Add a DBG option for testing userptr more thoroughly + + Signed-off-by: Chris Wilson + +commit fbe081061a2790e0e6e6a4065af313df0d1d6a84 +Author: Chris Wilson +Date: Tue Apr 9 09:52:13 2013 +0100 + + sna: Document fence limits for gen4+ + + Signed-off-by: Chris Wilson + +commit 5f1367d611b91008ba28a8c99a6b98a3e84449dc +Author: Chris Wilson +Date: Tue Apr 9 09:18:41 2013 +0100 + + sna/video: Textured video passthrough no longer relies upon XvMC + + Signed-off-by: Chris Wilson + +commit 21294eaaf16a1e35fefe0f45a237826d38dc62eb +Author: Chris Wilson +Date: Tue Apr 9 09:10:33 2013 +0100 + + sna/video: Expand passthrough support for overlay planes + + The passthrough is actually a generic, albeit private, mechanism that + anything can use to pass along a GEM handle for use with Xv. + + Signed-off-by: Chris Wilson + +commit 86efddd9e4b921fcfc1a4b7492ba9174b84de64c +Author: Chris Wilson +Date: Mon Apr 8 10:54:56 2013 +0100 + + sna: Remove assertions for mapped GPU bo if priv->cpu after GPU bo creation + + The condition that we have a mapped GPU bo iff priv->cpu is only true if + we have a GPU bo at the time of using the CPU -- if we create the GPU bo + during move_to_gpu, then that assertion is bogus. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 678279eb373310f1a71a3d74e5a500b343e98830 +Author: Chris Wilson +Date: Sat Apr 6 15:58:50 2013 +0100 + + 2.21.6 release + +commit 5332d5a7e055042233e279385bfe1388adfe15fa +Author: Chris Wilson +Date: Sat Apr 6 15:42:23 2013 +0100 + + configure: Allow valgrind support to be manually enabled + + Irrespective of the DDX debug settings, some people wish to run Xorg + under valgrind and so prefer to have the cleaner output by making the + DDX valgrind aware. + + (Actually Maarten wants valgrind support enabled by default...) + + Suggested-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit 091cf6f0477824c5826547c02394752b6dc944ce +Author: Chris Wilson +Date: Sat Apr 6 09:30:57 2013 +0100 + + sna: Improve assertions to detect rogue priv->cpu status + + Signed-off-by: Chris Wilson + +commit 4a43aa81e27e8a651fde8a4761fd14bd8824d90c +Author: Chris Wilson +Date: Thu Apr 4 10:53:55 2013 +0100 + + sna: Restore bo->flush status for large bo + + Since we started discarding the flush flags on cached bo (in order to + prevent DRI flush states leaking), we failed to preserve the flush flag + for large bo (which uses it to keep batches trim and other hints). + + Signed-off-by: Chris Wilson + +commit ed3dab44a717a1a88470228b5e33f20de1e4ad0d +Author: Chris Wilson +Date: Tue Apr 2 15:20:52 2013 +0100 + + sna: Adjust userptr structure for implicit padding + + Signed-off-by: Chris Wilson + +commit 4e2fc5aee035c3059ca33dbcafc71dc5988d6b09 +Author: Chris Wilson +Date: Tue Apr 2 14:29:29 2013 +0100 + + sna: Relax scanline waits on HSW to be emittable from either ring + + My overzealous reading of the bspec lead me to the conclusion that the + MI_LOAD_SCANLINES command was only available on the blitter ring. This + is false, thankfully, and allows us to do vsync'ed Xv. + + Signed-off-by: Chris Wilson + +commit 5a36fdcee769195d5c6e642e84a8976114e7c6de +Author: Chris Wilson +Date: Tue Apr 2 11:01:53 2013 +0100 + + sna/gen4: Kill stray debugging ErrorF from previous commit + + Signed-off-by: Chris Wilson + +commit 3d7e16addb2fb5f35936aafe8e16685a91d30f59 +Author: Chris Wilson +Date: Tue Apr 2 10:58:52 2013 +0100 + + sna/gen4: Break the Video rendering loop into 16 rectangle chunks + + If we feed more than 16 rectangles into the video rendering pipeline, + the GPU goes crazy and starts emitting corruption. Lalalala. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1162046 + Signed-off-by: Chris Wilson + +commit f09aa788d79d36688bcfdd3b49b92367590c5f16 +Author: Chris Wilson +Date: Tue Apr 2 10:01:21 2013 +0100 + + DRI2GetMSC: Do not send a bogus ust for when the drawable is not displayed + + According to the opengl glx_sync_control spec, the Unadjusted System Time + (or UST) is a 64-bit monotonically increasing counter that is available + throughout the system: + http://www.opengl.org/registry/specs/OML/glx_sync_control.txt + + Therefore, sending 0, even in this corner case, is out of spec. However, + we cannot just return FALSE here as that triggers a BadDrawable error to + be sent, and as is often the case mishandled, to the client. This results + in a certain compositor terminating, for example. + + As an alternative we can use the monotonic system timestamp which in + theory should also be monotonic with the previous and subsequent vblank + times. + + Based on a patch by Daniel Kurtz. + + Reported-by: Daniel Kurtz + Signed-off-by: Chris Wilson + +commit 4af622edfc18af523e1fa9063379f68374e19b04 +Author: Chris Wilson +Date: Mon Apr 1 22:44:13 2013 +0100 + + sna: Try to eliminate pending operations to the bo being replaced + + When we are replacing a bo with fresh data, we can drop pending + operations to it and thereby reduce the complexity of the replacement. + + Signed-off-by: Chris Wilson + +commit ef0038d358e613381e03c077e06a87fc49108d87 +Author: Chris Wilson +Date: Mon Apr 1 22:43:48 2013 +0100 + + sna: Allow the compiler to inline memcpy for the bitblt routines + + Signed-off-by: Chris Wilson + +commit 43181692f752f0a552d2e2c76d8379fe16e521cf +Author: Chris Wilson +Date: Thu Mar 28 15:41:38 2013 +0000 + + sna/gen7: Refine is_gt2() for Haswell versus Ivybridge + + The two similar chipsets do not use the same PCI-ID encoding schema. + + Fixes regression from + commit 235a3981ea9759317b392302a2b2b8f4fafab410 + Author: Chris Wilson + Date: Tue Mar 26 20:37:14 2013 +0000 + + sna/gen7: Use GT2 values for GT2 variants + + Reported-by: zaverel@free.fr + Signed-off-by: Chris Wilson + +commit 96c10bdff95a3f8a68c6623446655c4c3dbf738a +Author: Chris Wilson +Date: Wed Mar 27 22:10:37 2013 +0000 + + sna/gen7: Resist the temptation to overprogram the number of PS threads for HSW + + Signed-off-by: Chris Wilson + +commit 19dfa72c28c6dc677dbfec3a538d4481985195e5 +Author: Chris Wilson +Date: Wed Mar 27 16:56:10 2013 +0000 + + sna/gen4+: Set read-write allocation mode for the target render cache + + As we often first clear the destination before performing a blend, we + get a performance boost if that first write populates the render cache. + + Signed-off-by: Chris Wilson + +commit d9b8c2039d1be17af8c56364341fc3e10795f200 +Author: Chris Wilson +Date: Wed Mar 27 14:49:15 2013 +0000 + + sna/gen7: Fix MOCS for Haswell + + The memory attributes changed slightly, and in particular there is now + an explicit uncached setting - which of course happened to be the value + currently selected. + + Signed-off-by: Chris Wilson + +commit 04b28021409bc179f6705802f3ccacb1e3c48cc5 +Author: Chris Wilson +Date: Tue Mar 26 21:53:04 2013 +0000 + + sna/gen7: Restore render acceleration for VLV power-on board + + Signed-off-by: Chris Wilson + +commit 2054f43e4332e9d0ed61a0d643a1390dffff8d96 +Author: Chris Wilson +Date: Tue Mar 26 20:38:52 2013 +0000 + + sna/gen7: Prefer spans for GT2 desktop variants + + Signed-off-by: Chris Wilson + +commit 235a3981ea9759317b392302a2b2b8f4fafab410 +Author: Chris Wilson +Date: Tue Mar 26 20:37:14 2013 +0000 + + sna/gen7: Use GT2 values for GT2 variants + + The check was only testing for GT2+ and excluding the normal GT2 + devices. See also + + commit ce9f0448367ea6a90490a28150bfdc0a76500129 + Author: Chris Wilson + Date: Fri Feb 8 16:01:54 2013 +0000 + + sna/gen6: Use GT2 settings for both GT2 and GT2+ + + Signed-off-by: Chris Wilson + +commit 3dddb01005274376c8cdc5eecad36d4e0723004a +Author: Mark Kettenis +Date: Tue Mar 26 20:50:53 2013 +0100 + + sna: Use a more portable way to determine total RAM size + + The sysinfo function is Linux-specific. sysconf(_SC_PHYS_PAGES), while + not truly portable, is available on many more systems, including Linux, + Solaris, NetBSD, FreeBSD and OpenBSD. So use that instead. Verified + that this results in the same value as the sysinfo call on a handful of + Linux systems. + + Signed-off-by: Mark Kettenis + +commit e63390df52117e1d3ca9d23a736e9995bc734765 +Author: Chris Wilson +Date: Tue Mar 26 16:32:13 2013 +0000 + + sna: Add extra '()' around bitwise &/&& for CPU feature detection + + By popular demand. + + Signed-off-by: Chris Wilson + +commit 1d6f4078c1e405749ff688058ef76c287ab36201 +Author: Chris Wilson +Date: Tue Mar 26 16:28:26 2013 +0000 + + sna/gen4+: Reorder code to compile on squeeze + + Remember to only use sse4_2, avx2 in their restricted sections that + check for compiler support. + + Signed-off-by: Chris Wilson + +commit 0b479504c82bd81c0b93de0e6529eae928eea3bf +Author: Chris Wilson +Date: Tue Mar 26 16:12:30 2013 +0000 + + sna: Check for OS support of AVX/AVX2 before use + + If the OS has not initialised support for the extended instructions, + then their use may result in general protection faults. + + Based on code by Thiago Macieira. + + Reported-by: Arjan van de Ven + Signed-off-by: Chris Wilson + +commit 9620f419076202ebc89b4c7f1c06374fb2554f28 +Author: Chris Wilson +Date: Tue Mar 26 15:44:42 2013 +0000 + + sna: Fix AVX2 detection + + It requires use of the cpuid feature eax=7:ecx=0, so it requires the + extended version of __cpuid to pass in the subfeature. + + Signed-off-by: Chris Wilson + +commit da2bd82b0e10f8a263f7ab4fb49b440349d97ace +Author: Chris Wilson +Date: Tue Mar 26 15:13:32 2013 +0000 + + sna/gen4+: Add a couple more advanced SSE variants for composite vertices + + Signed-off-by: Chris Wilson + +commit 86bcf4a9f5dff98eab076df5872c3c412c0c13af +Author: Chris Wilson +Date: Tue Mar 26 15:13:08 2013 +0000 + + sna: AVX2 is in the ebx result of cpuid + + Signed-off-by: Chris Wilson + +commit a5be4210b7e8b4a895a70ba617fda45d2e0188f0 +Author: Chris Wilson +Date: Tue Mar 26 09:05:48 2013 +0000 + + sna: Trim removed fields from execbuffer2 for OpenBSD support + + Reported-by: Mark Kettenis + Signed-off-by: Chris Wilson + +commit 761ab4124e00b3dbab15abe69a9b29d9c3d0da0d +Author: Mark Kettenis +Date: Mon Mar 25 22:40:35 2013 +0100 + + sna: Fix OpenBSD backlight control implementation + + Fix cut'n'paste error such that this actually compiles. + + Signed-off-by: Mark Kettenis + +commit 0a9b136ec43c860e6e6e651efea0330ac36a4ea5 +Author: Chris Wilson +Date: Mon Mar 25 15:34:41 2013 +0000 + + Remove the GeneralSocket upon CloseScreen + + Be neat and tidy in case we are shutdown but the server is not + regenerated (e.g. a hot-unplug). + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit 6b20924f22a14f69651dcf471c48f8a44d8ad42f +Author: Chris Wilson +Date: Sat Mar 23 23:08:02 2013 +0000 + + sna: Convert out-of-bounds sample to CLEAR + + If asked to perform pixelformat conversion of a sample that resides + outside the valid area, we can simply substitute CLEAR. + + Bugzila: http://bugs.freedesktop.org/show_bug.cgi?id=62681 + Signed-off-by: Chris Wilson + +commit f6582387e7d601272a92c3aaeb656de5ce1ffe75 +Author: Chris Wilson +Date: Sat Mar 23 10:22:41 2013 +0000 + + sna: Fix an assertion to check the correct bo + + After syncing the GPU bo for use, that's what we should test as well. + + Signed-off-by: Chris Wilson + +commit 88b6b80c2a5191717f0baeb22cdb70ee8c993e09 +Author: Chris Wilson +Date: Fri Mar 22 13:36:16 2013 +0000 + + sna: Fix assertions that the pixmap points into the CPU bo for fallbacks + + Signed-off-by: Chris Wilson + +commit ccd6b7e402e731c73163b132a80ae29ae2911613 +Author: Chris Wilson +Date: Fri Mar 22 11:28:01 2013 +0000 + + sna: Add backlight control implementation + + Based on the previous patch by Mark Kettenis + +commit 364e02c7998813643bc81f25ba077a764872d49e +Author: Mark Kettenis +Date: Fri Mar 22 11:23:11 2013 +0100 + + uxa: Add OpenBSD backlight control implementation + + Signed-off-by: Mark Kettenis + +commit 8d75b2ece1de1c95047c5dc5a569348abd0e6325 +Author: Chris Wilson +Date: Fri Mar 22 09:51:46 2013 +0000 + + sna: Fix computation of clip extents for stippling + + The clip extents for the stippled BLT missed applying the drawable + offset to the lower-right corner, so inevitably every operation ended up + being clipped. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62618 + Signed-off-by: Chris Wilson + +commit 9f8e86800345d19785eae2dd2099dd7d61a7a3b3 +Author: Chris Wilson +Date: Thu Mar 21 22:48:06 2013 +0000 + + sna/dri: Disable assertion and associated bookkeeping + + Due to long standing ignored bugs in DRI2, we have to accept breakage + in the driver. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62614 + Signed-off-by: Chris Wilson + +commit 4adebfed415cf58599b22e873f32e7ce2eaa6542 +Author: Chris Wilson +Date: Thu Mar 21 08:53:12 2013 +0000 + + 2.21.5 release + +commit 1aca872ee51e10908dcc4979596ae69732e9a02a +Author: Chris Wilson +Date: Tue Mar 19 08:26:01 2013 +0000 + + sna: Haswell reintroduces MI_LOAD_SCAN_LINES + + Better late than never? Interestingly only available from the BLT ring, + which makes accurate waiting for XVideo (which must use the render ring) + impossible in the current form - we need to render to a temporary then + do a vsynced blit in this case. + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1156679 + Signed-off-by: Chris Wilson + +commit f132452da14fd09a2a3926cc9c034cb2e8c2f1a9 +Author: Chris Wilson +Date: Tue Mar 19 07:57:30 2013 +0000 + + sna: Ignore vsync waits on tiny scanline ranges + + If the update is only a couple of lines tall, any tear will not be + visible - so just ignore programming the wait into the GPU. + + Signed-off-by: Chris Wilson + +commit 308f0208de59620190dd3cb65b3243d2e8a7bd87 +Author: Chris Wilson +Date: Mon Mar 18 15:04:22 2013 +0000 + + sna: Reset operation state between glyphs + + We are not resetting sufficient state between operations as we presume + that all callers of Composite() currently pass in a blank state. In the + long run, we want to remove that burden and do a minimal initialisation. + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1156387 + Signed-off-by: Chris Wilson + +commit 4a37d57f9633bbd29f308239c1cd956767b277c0 +Author: Chris Wilson +Date: Mon Mar 18 15:00:01 2013 +0000 + + sna: Add a pair of sanity checks before creating the redirection target + + Signed-off-by: Chris Wilson + +commit 28371a34fa83f70a7af3c8d3bfd6c7cef9e35073 +Author: Chris Wilson +Date: Mon Mar 18 14:49:58 2013 +0000 + + sna: Skip processing an all-clipped-out glyph + + Along the slow path, skip all processing of glyphs that are not visible. + This is important as the slow path handles the per-glyph redirection + case, which is much more expensive. + + Signed-off-by: Chris Wilson + +commit 16dac417c8049d65b3641e0f662865772faad61f +Author: Chris Wilson +Date: Sun Mar 17 21:56:56 2013 +0000 + + sna/dri: Fix stale Pixmap detection + + NB the back buffer is not associated with the Drawable and so has no + pixmap field set. Hence comparing the front->pixmap against the + back->pixmap was always rejecting the blit. All we can check is that + front->pixmap corresponds with the current Drawable and so reject stale + configuration. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 85213d5d450eec5696496128c1acecb5ca13c53b +Author: Chris Wilson +Date: Sun Mar 17 21:42:48 2013 +0000 + + sna: Don't remove the flush flag for userptr bo + + This flag is far too overload with meaning, but for now this prevents us + attempting to call free() on a SHM segment. + + Signed-off-by: Chris Wilson + +commit c5b901a635a9c8c74017682d17cfcd93031907b4 +Author: Chris Wilson +Date: Sat Mar 16 10:54:51 2013 +0000 + + sna/dri: Clear flush flag upon bo destroy + + Fixes sanity checks that we do not leak the flushing status, nor + invoke an operation upon an unflushed bo. + + Signed-off-by: Chris Wilson + +commit 45d20e9a65bec8d962a4ec20ee35079935f71b91 +Author: Chris Wilson +Date: Thu Mar 14 22:09:38 2013 +0000 + + sna: Add an LLC path for creating snoopable buffers + + As with LLC we do not actually need to track snoopable as a separate + cache state. + + Signed-off-by: Chris Wilson + +commit 94cb10c3f2b9bbb6ae3c76faebe9fc88691224a9 +Author: Chris Wilson +Date: Thu Mar 14 22:02:09 2013 +0000 + + sna/gen5+: Add missing float casts in computation of scaled src offsets + + Without the casts, the division ends up as 0 rather than the fractional + offset into the texture. + + The casts were missed in the claimed fix: + + commit 89038ddb96aabc4bc1f04402b2aca0ce546e8bf3 + Author: Chris Wilson + Date: Thu Feb 28 14:35:54 2013 +0000 + + sna/video: Correct scaling of source offsets + + Reported-by: Roman Elshin + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62343 + Signed-off-by: Chris Wilson + +commit dad50881d545da665191c6681f2acd0ebc3ddbfc +Author: Chris Wilson +Date: Thu Mar 14 14:53:13 2013 +0000 + + sna: Consider placement hints when choosing userptr read path + + Signed-off-by: Chris Wilson + +commit 11e2802528aed4ef9ffc8b75045c72ac641e54b1 +Author: Chris Wilson +Date: Thu Mar 14 14:42:25 2013 +0000 + + sna: Add handle info to sync DBG + + Signed-off-by: Chris Wilson + +commit 20832494be06da9ebc4801647521f95e092188fc +Author: Chris Wilson +Date: Thu Mar 14 14:03:00 2013 +0000 + + sna: Use userptr downloads for incomplete GPU damaged pixmaps + + If the pixmap is not wholly damaged, but still contains the region to be + read, then use userptr (if available). + + Signed-off-by: Chris Wilson + +commit 92023f39a9c8897e5a978f44b7970773b118f628 +Author: Chris Wilson +Date: Thu Mar 14 09:42:37 2013 +0000 + + sna: Add a few more assertions to track userptr through the caches + + i.e. make sure they don't end up in any caches. + + Signed-off-by: Chris Wilson + +commit 80401f4fe54142c16ea7578b587529610b68cb67 +Author: Chris Wilson +Date: Wed Mar 13 11:01:45 2013 +0000 + + sna/trapezoids: Minimally replace points for TriFan + + The realisation dawns that it wasn't the ordering of points within the + triangle, but simply that I was replacing the wrong one. + +commit 716723d655a6ee11b090642b759e2542ad712c17 +Author: Chris Wilson +Date: Wed Mar 13 10:51:03 2013 +0000 + + sna/trapezoids: Correct ordering of points within TriFran + + Signed-off-by: Chris Wilson + +commit 49374f2155f0c8c80b1c54e968d510d55df49221 +Author: Chris Wilson +Date: Tue Mar 12 20:12:51 2013 +0000 + + sna/gen4: Tweak compilation flags to avoid mixed settings across functions + + Confusing gcc with different flags for supposedly inlined functions is + not a good idea. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=62198 + Signed-off-by: Chris Wilson + +commit ee0ed88a09bc2f8ebe49b1d7f7e209a73e02fee0 +Author: Aaron Plattner +Date: Tue Mar 12 12:45:58 2013 -0700 + + uxa: don't crash when freeing an uninitialized screen + + When intel_scrn_create creates a screen, it sets scrn->driverPrivate to + (void *)(match_data | 1). Normally, this is read by I830PreInit and then + replaced with a pointer to the intel_screen_private structure. However, it's + possible for the server to delete the screen before initializing it, which leads + to a crash in I830FreeScreen when it tries to interpret the unaligned match_data + pointer as a pointer to a intel_screen_private. + + Fix this by checking the low bit of the pointer and skipping the teardown code + if it's set. + + Signed-off-by: Aaron Plattner + +commit b1952e79021759927361d284b157713a651a10b1 +Author: Chris Wilson +Date: Tue Mar 12 19:58:28 2013 +0000 + + sna/gen3: Tweak code generation for gen3_emit_composite_primitive_constant__sse2 + + References: https://bugs.freedesktop.org/show_bug.cgi?id=62198 + Signed-off-by: Chris Wilson + +commit f320e6908f24ff356303c8905c78ac290e24c2e6 +Author: Chris Wilson +Date: Tue Mar 12 19:53:20 2013 +0000 + + sna/gen3: Tweak code generation for gen3_emit_composite_primitive_identity_gradient__sse2 + + References: https://bugs.freedesktop.org/show_bug.cgi?id=62198 + Signed-off-by: Chris Wilson + +commit b1d0ca266cc67df65c81a9dbb9cc83027ff240ea +Author: Chris Wilson +Date: Tue Mar 12 19:03:44 2013 +0000 + + sna/gen3: Reduce another use of transforms + + Prefer the slightly cheaper _sna_get_transformed_scaled(). + + Signed-off-by: Chris Wilson + +commit 50374fb4947e6682b6c8aced639b422110b6ec98 +Author: Chris Wilson +Date: Tue Mar 12 18:39:07 2013 +0000 + + uxa/glamor: Prevent a crash when trying to load a misconfigured glamor + + Glamor requires that glamoregl is explicitly loaded via Section "Module" + or else it currently crashes. + + Based on a patch by Michel Dänzer for xf86-video-ati. + + Signed-off-by: Chris Wilson + +commit c79a189b6f06a58ddbd92427b6c57a0bdfb1e16c +Author: Chris Wilson +Date: Tue Mar 12 15:57:17 2013 +0000 + + sna: Missing git-add for 09862a85eba243b + + Signed-off-by: Chris Wilson + +commit a31831bce86745205369faaa297064770f4350f9 +Author: Chris Wilson +Date: Tue Mar 12 15:26:28 2013 +0000 + + sna: Improve asserts that the CPU bo is not busy after synchronisation + + Taking into account that we may not do a full synchronisation. + + Signed-off-by: Chris Wilson + +commit 09862a85eba243babde9ca721ca6521566f5c082 +Author: Chris Wilson +Date: Tue Mar 12 15:12:59 2013 +0000 + + sna: Mark redirect proxies with a unique id + + This helps gen3 in particular as it uses the unique_id field of a bo to + detect changes in render target. + + Signed-off-by: Chris Wilson + +commit 4f8fba31d7317248e0d4710ef5553dc1f9593314 +Author: Chris Wilson +Date: Tue Mar 12 10:12:12 2013 +0000 + + sna: Apply the source offset to the transform when fixing up gradients + + Otherwise pixman will apply the source transform to the offsets. + + Reported-by: Ognian Tenchev + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62198 + Signed-off-by: Chris Wilson + +commit 0b143fcb2bdeec9abd1c1d2a9dbe707cb9165b65 +Author: Chris Wilson +Date: Mon Mar 11 18:11:27 2013 +0000 + + sna: Improve sna_copy_boxes DBG by printing the bo handles + + The handles of the bo are easier to track through the DBG as they are + more often printed than then their addresses. + + Signed-off-by: Chris Wilson + +commit 44d3ffdf534eb1c24ab729b9af31f09a86b82256 +Author: Chris Wilson +Date: Mon Mar 11 17:14:39 2013 +0000 + + sna: Only allocate addition space if we need pixel data + + Signed-off-by: Chris Wilson + +commit b500e30d5dbcf91542c2831ebd3c48b28a01bf28 +Author: Chris Wilson +Date: Mon Mar 11 17:14:07 2013 +0000 + + sna: Mark the userptr as a CPU mapping + + This helps clarify some recent asserts. + + Signed-off-by: Chris Wilson + +commit 17a99f0743836997aa8e4f7eafc0ea4978244f44 +Author: Chris Wilson +Date: Mon Mar 11 16:41:16 2013 +0000 + + sna/dri: Free the event on the impossible error path + + Just in case we end up with bogus data, don't leak. + + Signed-off-by: Chris Wilson + +commit 9d097d5140857fad209ee5c2c8b5461aac54e81e +Author: Chris Wilson +Date: Mon Mar 11 16:39:11 2013 +0000 + + sna/dri: Free chained swaps upon CloseWindow + + The assumption that the chained swaps are freed after the next vblank + turns out to be wrong, and in effect we would leak the bo if we + happened to submit the final swap faster than vrefresh and close the + window before the vblank. + + Signed-off-by: Chris Wilson + +commit 2f6a9927952e25aa2a1628e66295f0903dcf865c +Author: Chris Wilson +Date: Mon Mar 11 14:40:52 2013 +0000 + + sna/dri: Reorder assert to avoid NULL dereference + + Only try to dereference chain->draw after the check to see if it was + already destroyed. + + Signed-off-by: Chris Wilson + +commit cffdd1eed0ca344142c165788ce7a31b80f1f55f +Author: Chris Wilson +Date: Mon Mar 11 14:16:27 2013 +0000 + + test: Try to exercise races between DRI2SwapBuffers and CloseWindow + + Signed-off-by: Chris Wilson + +commit 4fb7be0a0d4bf027ed254399b6b538e979f525f2 +Author: Chris Wilson +Date: Sun Mar 10 14:34:39 2013 +0000 + + 2.21.4 release + +commit 25a63b32c7b549ffb3c7f14de4bf2731d044eb39 +Author: Chris Wilson +Date: Mon Mar 11 10:42:08 2013 +0000 + + sna: Tighten checking for coherent maps + + Remember all the special cases where we can use a CPU mmap as a + temporary substitute for a GTT mapping. + + Signed-off-by: Chris Wilson + +commit 210d474a96d3adf7338b49ee2c234893b54bbb2c +Author: Chris Wilson +Date: Sun Mar 10 16:40:35 2013 +0000 + + sna: Tweak CPU mappings to be only used if a read is required + + Signed-off-by: Chris Wilson + +commit 35f50a98fde7a4ebe6871bd23475948a2a530633 +Author: Chris Wilson +Date: Sun Mar 10 15:51:45 2013 +0000 + + sna/dri: Flatten _sna_dri_destroy_buffer() + + One level of indentation can be trivially removed with an earlier return. + + Signed-off-by: Chris Wilson + +commit b81ee116d36845e55f71be2db391f93c1b681d5d +Author: Chris Wilson +Date: Sun Mar 10 14:15:46 2013 +0000 + + sna/dri: Add a couple more basic assertions + + To catch bad reference counting and loss of flush. + + Signed-off-by: Chris Wilson + +commit 93ecd5606eaf2e1db2b844f39bb04d77fa53cf8d +Author: Chris Wilson +Date: Fri Mar 8 23:38:12 2013 +0000 + + sna: Only shrink the maximum GPU size to fit into cache + + That is be very careful that we do not enlarge it past the aperture size + on early gen. + + Signed-off-by: Chris Wilson + +commit 78c756120db2e5e174925a92c0a0bba3ff70860c +Author: Chris Wilson +Date: Fri Mar 8 16:39:21 2013 +0000 + + sna/gen4: Initialise a pair of unimportant variables + + Should never actually affect any results. + + Signed-off-by: Chris Wilson + +commit dcd52d0c186e8b17569335338232298fbbea2b2d +Author: Chris Wilson +Date: Thu Mar 7 23:03:52 2013 +0000 + + sna: Fallback if we cannot fit the tiling copy into the aperture + + If we cannot fit the source/destination and a tile into the aperture, + then we cannot perform the copy and must do it using the CPU. + + Signed-off-by: Chris Wilson + +commit 50d0ea02b3908156534fc00def55cfca30bbfecc +Author: Chris Wilson +Date: Thu Mar 7 22:58:21 2013 +0000 + + sna: Trim tile sizes to fit aperture constraints + + This is especially important with gen2 where we have no unmappable GTT + to utilise. + + Signed-off-by: Chris Wilson + +commit cd1c14b172b0794f744b304f59b4fc78f0d6f8d6 +Author: Chris Wilson +Date: Thu Mar 7 10:16:19 2013 +0000 + + sna: Remove the unused output and crtc lists + + Signed-off-by: Chris Wilson + +commit 1b8fc8715598e7bf756ccfa99a6da59bab48c2a0 +Author: Chris Wilson +Date: Thu Mar 7 10:12:14 2013 +0000 + + sna: Disambiguate sna_crtc_resize() + + sna_crtc_resize() operates upon the whole configuration rather than a + single crtc like the other sna_crtc_* so rename it to make it distinct. + + Signed-off-by: Chris Wilson + +commit 5f1c2b3b8bb062a4574e5114b09a33b7e4f0c811 +Author: Chris Wilson +Date: Thu Mar 7 09:40:06 2013 +0000 + + sna: Supply a fake pipe to run completely headless + + Signed-off-by: Chris Wilson + +commit 2aacfbaa5143568906e88e489c72f4ebf065a4ec +Author: Chris Wilson +Date: Thu Mar 7 09:10:32 2013 +0000 + + sna: Return early if there are no outputs to setup + + Instead of reporting failure, just try to run headless. + + Signed-off-by: Chris Wilson + +commit b84db39edb6ebce965c1354dc5994bf0a70cea92 +Author: Chris Wilson +Date: Thu Mar 7 09:07:19 2013 +0000 + + intel: Relax the has-kms test slightly + + Do not rely on a fully populated set of CRTCs, but merely note that the + GETRESOURCES ioctl returns an error if KMS is not enabled. + + Signed-off-by: Chris Wilson + +commit c6a59bee3bf5f42147f75a714f2b9aa26590329e +Author: Chris Wilson +Date: Wed Mar 6 19:01:50 2013 +0000 + + sna: Disable read-read optimisations + + There is still a lurking issue, so punt on the optimisation for now. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61628 + Signed-off-by: Chris Wilson + +commit 9a7577902ee3a1286ea2a74a79aaeff6c72a6f18 +Author: Chris Wilson +Date: Wed Mar 6 11:22:40 2013 +0000 + + sna: Lighten the wakeup handler slightly + + As the wakeup handler is called more frequently, we want to avoid any of + the more heavyweight processing. So trim the wakeup handler down to the + check to see if the GPU is idle and so we should immediately flush what + we have currently queued. + + Signed-off-by: Chris Wilson + +commit 779fc0b20c382e572eb41d3cbf3d639e4eb77874 +Author: Chris Wilson +Date: Tue Mar 5 22:29:54 2013 +0000 + + sna: Typo ('unsuported') in DBG messages + + Signed-off-by: Chris Wilson + +commit e67aece46301ebb77d5fce7ac687a03713956fef +Author: Chris Wilson +Date: Tue Mar 5 21:43:20 2013 +0000 + + sna: Assert that the pixmap is not pinned before releasing the GPU bo + + Nothing suspicious in this set, just an extra dab of paranoia. + + Signed-off-by: Chris Wilson + +commit bc5f81901f1b4451e4187b97f65a8be4c03b2494 +Author: Chris Wilson +Date: Tue Mar 5 15:53:24 2013 +0000 + + sna: The GPU bo submit is still required before mapping for inplace operations + + As we may choose to force the stall as we would be doing a read-back in + any event... + + Signed-off-by: Chris Wilson + +commit 43e3886c6de3ab89e3629c98287ede77ae2f6876 +Author: Chris Wilson +Date: Tue Mar 5 15:32:35 2013 +0000 + + sna: Use drawable_gc_flags() to select placement for PolyArc + + Signed-off-by: Chris Wilson + +commit 99b30203ba1c26d89d869691a743488a5dc32935 +Author: Chris Wilson +Date: Tue Mar 5 13:45:45 2013 +0000 + + sna: Fix deference of just nullified GPU bo in previous commit + + One last minute refactor too far, combining the too if(priv->gpu_bo) + blocks forgot that the first block tried to free gpu_bo... + + Signed-off-by: Chris Wilson + +commit d31dc1343d59f8ef8876e1dc8ddfec9c6be1a602 +Author: Chris Wilson +Date: Tue Mar 5 13:30:37 2013 +0000 + + sna: Refactor the is-mappable test for inplace operations + + By moving the test into the common function for creating a mappable GPU + bo, we can also consider recreating that bo when desirable. + + Signed-off-by: Chris Wilson + +commit 9fa9234c7061be3cff9a65aac0702f4c3caac40d +Author: Chris Wilson +Date: Tue Mar 5 11:34:49 2013 +0000 + + sna: Prefer GPU for self-copies when undamaged on the CPU + + Signed-off-by: Chris Wilson + +commit 60ec35b8d25ecfabf1744ea7bc81109d7f2a90e2 +Author: Chris Wilson +Date: Tue Mar 5 11:14:37 2013 +0000 + + sna: Be explicit when checking for an idle bo after CPU synchronisation + + Signed-off-by: Chris Wilson + +commit ad4901a0354efaed65bb15ef33561df067d300b7 +Author: Chris Wilson +Date: Tue Mar 5 09:23:07 2013 +0000 + + sna: Ensure that the tearfree swap is unmapped afterwards + + After swapping the bo for the screen pixmap, we need to make sure that + we don't chase any dangling pointers. + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1133490 + Signed-off-by: Chris Wilson + +commit 007a95d62fc998b3a558bb80310c82256d00b0bb +Author: Chris Wilson +Date: Mon Mar 4 13:52:04 2013 +0000 + + sna: Drop a local variable only used to hold a constant + + Signed-off-by: Chris Wilson + +commit 4be725333c11804a45c80a4bc45852e81ea57ed5 +Author: Chris Wilson +Date: Mon Mar 4 11:55:16 2013 +0000 + + sna: Ensure we do not attempt to operate inplace on a very large pixmap + + Otherwise we will fail to map it into the GTT. In theory, this should + just result in the same fallback paths, but pushing that knowledge up + further should help us make better decisions. + + Signed-off-by: Chris Wilson + +commit ad05039cc83b40cf45c8221d69506d6c88c27a86 +Author: Chris Wilson +Date: Mon Mar 4 10:11:22 2013 +0000 + + sna/gen3: Always prefer BLT for copies + + Signed-off-by: Chris Wilson + +commit 59f030dd27eff5fbf9ddcd22faa3087bc9c5ff54 +Author: Chris Wilson +Date: Mon Mar 4 10:10:39 2013 +0000 + + sna/gen3: Perform alpha-fixup upon copy sources + + This is required for copying from depth-15 surfaces onto other depths. + + Reported-by: Reinis Danne + Signed-off-by: Chris Wilson + +commit 48a733a35a2de36664a42384d066c06f54cf2ad7 +Author: Chris Wilson +Date: Sun Mar 3 15:32:23 2013 +0000 + + sna: Only destroy the cached CLEAR picture if it exists + + Reported-by: Reinis Danne + Signed-off-by: Chris Wilson + +commit 2583232773f1fa505e0676f07b029b29b90c8ea7 +Author: Chris Wilson +Date: Sun Mar 3 15:25:01 2013 +0000 + + sna: Nullify cache pointers upon server regen + + To make sure we don't chase dangling pointers on the next pass. + + Signed-off-by: Chris Wilson + +commit 4dec895b69c2e545b142a3646646e13f7fb06507 +Author: Chris Wilson +Date: Sun Mar 3 14:44:13 2013 +0000 + + sna/gen3: Correct typo in assertion + + Signed-off-by: Chris Wilson + +commit 862601c05e9788d1416173b730a5d4b6acabf374 +Author: Chris Wilson +Date: Sun Mar 3 14:00:18 2013 +0000 + + sna/gen3: Add some debug around rendercopies of the fbcon + + Signed-off-by: Chris Wilson + +commit 995abb46754eba7524afcb852159a31ea19add82 +Author: Chris Wilson +Date: Sun Mar 3 12:12:56 2013 +0000 + + sna: CPUID return ISA features in ecx/edx + + Whereas we were wrongly looking in eax. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61733 + Signed-off-by: Chris Wilson + +commit f9f2b5152f988d4b15f773354f3fadaff02cd3d7 +Author: Chris Wilson +Date: Sun Mar 3 11:10:51 2013 +0000 + + sna: Undo preferred depth for gen3 + + Mesa is buggy. Qt is buggy. Everything is buggy. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=61441 + Signed-off-by: Chris Wilson + +commit ef5edbf61686388126e62ce360a66dd8652b2493 +Author: Chris Wilson +Date: Sun Mar 3 09:29:53 2013 +0000 + + sna: Probe for kernel support of framebuffer formats + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1135403 + Signed-off-by: Chris Wilson + +commit cd313a8d5d1363929bebac83f81e347b4a9e70f1 +Author: Chris Wilson +Date: Sat Mar 2 22:52:15 2013 +0000 + + sna/dri: Guard against failed batch submission + + Avoid dereferencing a NULL bo if we do not submit a batch for the copy + operation. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61708 + Signed-off-by: Chris Wilson + +commit e4df4e03b147694c65196651f5c13e7199f74579 +Author: Chris Wilson +Date: Sat Mar 2 22:46:57 2013 +0000 + + sna: Eliminate a few used-once local variables + + Signed-off-by: Chris Wilson + +commit ae3531c3a1d72a73b25c5563b4db029f051262cb +Author: Chris Wilson +Date: Fri Mar 1 23:46:07 2013 +0000 + + Fix Haswell CRW PCI-IDs + + As we missed the PCI-ID for the CRW GT1 variant, we would not have enabled + render support for those particular Haswell machines. + + Reported-by: Kenneth Graunke + +commit fef6cdae9ebd217843bab2f65c87b59f8a9f782e +Author: Chris Wilson +Date: Fri Mar 1 15:58:42 2013 +0000 + + sna: Chain up CloseScreen + + Remember to call into the chained CloseScreen destructors! + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56608 + Signed-off-by: Chris Wilson + +commit 8c2dedaa4df2522d6a1725c09e9700c5d753ac93 +Author: Chris Wilson +Date: Fri Mar 1 15:49:57 2013 +0000 + + sna: Assert that inplace operations are done on coherent maps + + Signed-off-by: Chris Wilson + +commit d8296412b88b1ab4ea48572707408f7eeb52c8fa +Author: Chris Wilson +Date: Fri Mar 1 15:42:38 2013 +0000 + + sna: Assert that when caching a pixmap header the pScreen match + + Signed-off-by: Chris Wilson + +commit 904af323914e05830f17621a78b6e55b371ae5fc +Author: Chris Wilson +Date: Fri Mar 1 15:34:45 2013 +0000 + + sna: Assert that we do not resurrect stale pixmap across a server regen + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56608 + Signed-off-by: Chris Wilson + +commit d4164de5ccb82068e2858a90b2cd44eef82b6037 +Author: Chris Wilson +Date: Fri Mar 1 12:13:47 2013 +0000 + + sna: Assert that the ScrnInfo and ScreenPtr relationship is correct + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56608 + Signed-off-by: Chris Wilson + +commit 8d97c192a33473df3c9036147a4716783a86d742 +Author: Chris Wilson +Date: Fri Mar 1 11:59:49 2013 +0000 + + sna: Move some conditional code out-of-line + + Just to reduce the number of ifdefs, one at a time. + + Signed-off-by: Chris Wilson + +commit 4174c7bb14ea3428d86dc327950e76d0589e0cc4 +Author: Chris Wilson +Date: Fri Mar 1 09:21:03 2013 +0000 + + sna: Use depth-15 rather than depth-16 for reduced bw devices + + Keeping the number of bits identical between the RGB channels helps + prevent discoloration. + + Signed-off-by: Chris Wilson + +commit e05d2e481434084291503efdb84c944a560d8c29 +Author: Chris Wilson +Date: Fri Mar 1 09:08:19 2013 +0000 + + sna: Track number of pixmaps allocated whilst counting bo leaks + + Signed-off-by: Chris Wilson + +commit 89038ddb96aabc4bc1f04402b2aca0ce546e8bf3 +Author: Chris Wilson +Date: Thu Feb 28 14:35:54 2013 +0000 + + sna/video: Correct scaling of source offsets + + When applying pan and zoom to a mismatched video, it would inevitably + miscompute the origin and scale factors. + + Reported-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61610 + Signed-off-by: Chris Wilson + +commit a0a2faefdefbea63669dfeb49f7e701196ab5631 +Author: Chris Wilson +Date: Wed Feb 27 22:26:19 2013 +0000 + + sna: Fix syntax for __get_cpuid() + + It is a function not a macro like cpuid() and takes pointers to its + arguments! + + Signed-off-by: Chris Wilson + +commit bfc1fda87f442890919100473b819240f9c30c44 +Author: Chris Wilson +Date: Wed Feb 27 22:19:06 2013 +0000 + + sna/dri: Fix use of uninitialised pipe along error path + + > sna_dri.c:2018:6: warning: variable 'pipe' is used uninitialized + > whenever 'if' condition is true [-Wsometimes-uninitialized] + > if (get_private(front)->pixmap != get_drawable_pixmap(draw)) + > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + > sna_dri.c:2150:42: note: uninitialized use occurs here + > DRI2SwapComplete(client, draw, 0, 0, 0, pipe, func, data); + + Reported-by: Sedat Dilek + Signed-off-by: Chris Wilson + +commit f08ad3f8ef1ac3a38a92f793fa1cbc1d2d443095 +Author: Chris Wilson +Date: Wed Feb 27 17:46:55 2013 +0000 + + sna: Prettify GCC version detection in headers + + And fixup a basic error in the process. + + Signed-off-by: Chris Wilson + +commit 8aea4ae127f92c07e3ce86b6d2afaa207a6cdce9 +Author: Chris Wilson +Date: Wed Feb 27 17:38:46 2013 +0000 + + sna: Improve compatibility of cpuid.h detection + + Reported-by: Sedat Dilek + Signed-off-by: Chris Wilson + +commit 5c27307219b5a5c1f73dcde9d0b2beed5810bd7d +Author: Chris Wilson +Date: Wed Feb 27 14:58:35 2013 +0000 + + sna: Remove the trailing '.' from the previous commit + + Good Maarten for reporting the bug, bad Maarten for silently fixing up my + mistakes when testing! Thanks to Colin Walter and his tinderbox. + + Signed-off-by: Chris Wilson + +commit b8a0acd615042bee7bdf49c364a4815ade6b9a61 +Author: Chris Wilson +Date: Wed Feb 27 13:26:18 2013 +0000 + + sna: Migrate dirty tracking across ScreenPixmap updates + + Otherwise chaos ensues: + + Invalid read of size 8 + ==8647== at 0x8477BC1: has_offload_slaves.isra.38 (sna_accel.c:14402) + ==8647== by 0x84958E7: sna_accel_block_handler (sna_accel.c:13729) + ==8647== by 0x164B13: BlockHandler (dixutils.c:387) + ==8647== by 0x2B5273: WaitForSomething (WaitFor.c:210) + ==8647== by 0x160790: Dispatch (dispatch.c:357) + ==8647== by 0x14F549: main (main.c:298) + ==8647== Address 0xf3383e8 is 24 bytes inside a block of size 152 free'd + ==8647== at 0x4C2BA6C: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) + ==8647== by 0x2403DF: damageDestroyPixmap (damage.c:1549) + ==8647== by 0x1FFD88: XvDestroyPixmap (xvmain.c:372) + ==8647== by 0x1FE789: ShmDestroyPixmap (shm.c:273) + ==8647== by 0x8507C24: _sna_dri_destroy_buffer (sna_dri.c:448) + ==8647== by 0x289986: do_get_buffers (dri2.c:521) + ==8647== by 0x289C0F: DRI2GetBuffersWithFormat (dri2.c:690) + ==8647== by 0x28B68F: ProcDRI2Dispatch (dri2ext.c:306) + ==8647== by 0x160A40: Dispatch (dispatch.c:428) + ==8647== by 0x14F549: main (main.c:298) + ==8647== + ==8647== Invalid read of size 8 + ==8647== at 0x8477BCA: has_offload_slaves.isra.38 (regionstr.h:74) + ==8647== by 0x84958E7: sna_accel_block_handler (sna_accel.c:13729) + ==8647== by 0x164B13: BlockHandler (dixutils.c:387) + ==8647== by 0x2B5273: WaitForSomething (WaitFor.c:210) + ==8647== by 0x160790: Dispatch (dispatch.c:357) + ==8647== by 0x14F549: main (main.c:298) + ==8647== Address 0xdfdfdfdfdfdfdfe7 is not stack'd, malloc'd or (recently) free'd + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit 11b72628cb54ab0b78a0969fa8fabb591f6cf93f +Author: Chris Wilson +Date: Tue Feb 26 19:08:58 2013 +0000 + + sna/gen2: Add SSE2 fast paths for vertex emission + + Signed-off-by: Chris Wilson + +commit f2597c89d023beceddd65e99fa595741f2400218 +Author: Chris Wilson +Date: Tue Feb 26 18:44:45 2013 +0000 + + sna: Force GCC to use the SSE unit for SSE2 routines + + Merely hinting that it was preferred by using sse+387 was not enough + for GCC to emit the faster SSE2 code. + + Signed-off-by: Chris Wilson + +commit a18ce0f642fa347b61e4ca501bd2f747338a2975 +Author: Chris Wilson +Date: Tue Feb 26 18:44:35 2013 +0000 + + sna: Flatten the glyph emitters + + Signed-off-by: Chris Wilson + +commit 7bb06b02e67435354778fe87a3e0429fe3750c23 +Author: Chris Wilson +Date: Tue Feb 26 18:12:06 2013 +0000 + + sna/gen3: Expand the number of SSE2 routines for basic composite ops + + Signed-off-by: Chris Wilson + +commit 417c3f9b8c6b9a50dc1af440c53e94d2c6401251 +Author: Chris Wilson +Date: Tue Feb 26 17:41:57 2013 +0000 + + sna/trapezoids: Add a pair of unlikely hints for forced box emission + + Overflowing the buffer is unlikely, so pass the hint on to the compiler. + + Signed-off-by: Chris Wilson + +commit aa7e11a1a451c54d5cbff9a6c242075b08c590ae +Author: Chris Wilson +Date: Tue Feb 26 15:07:12 2013 +0000 + + sna: Improve handling of migrated userptr bo + + Superficially fixes gimp-2.9 + + Signed-off-by: Chris Wilson + +commit 32d8908337d45b9598ce07bc46b633ed5e0c7070 +Author: Chris Wilson +Date: Tue Feb 26 11:42:03 2013 +0000 + + sna: Flatten unaligned box emission + + Signed-off-by: Chris Wilson + +commit aa358fad8c934e6962976ecfdc5e5ebc9d1ad83c +Author: Chris Wilson +Date: Tue Feb 26 11:37:24 2013 +0000 + + sna: Bump required GCC for sse2 + + gcc-4.4.5 (on squeeze) triggers an ICE when using target(sse2). + + Signed-off-by: Chris Wilson + +commit 08747292b717fcea84ce3adc455b0161e5517e84 +Author: Chris Wilson +Date: Tue Feb 26 11:28:05 2013 +0000 + + sna: Conditionally compile sse2 routines + + Signed-off-by: Chris Wilson + +commit 9c63ddd9f14588bcec8275e2a64e56cc5b661a5a +Author: Chris Wilson +Date: Tue Feb 26 11:28:05 2013 +0000 + + sna: Conditionally compile sse4_2 routines + + Signed-off-by: Chris Wilson + +commit dc885d350ec53d08e0d4d529bb938bf2568d61ae +Author: Chris Wilson +Date: Tue Feb 26 11:28:05 2013 +0000 + + sna: Conditionally compile avx routines + + Signed-off-by: Chris Wilson + +commit 8cdebf3b72467f63a35888f38cd83658575fcf10 +Author: Chris Wilson +Date: Tue Feb 26 11:06:45 2013 +0000 + + sna/gen4: Cluster ISA + + Otherwise we seem to confuse the poor little compiler. This should also + make it easier to use CPP to turn off blocks. + + Signed-off-by: Chris Wilson + +commit 8272d849c0895d6fa66ccca972899f56dab71cc6 +Author: Chris Wilson +Date: Tue Feb 26 10:53:20 2013 +0000 + + sna/gen4+: All associated CPUs have sse2 at least + + So mark up the basic functions as SSE2 in case we are compiling for + 32-bit only. + + Signed-off-by: Chris Wilson + +commit 76d46201d7b7abc7c0b6bced9c6fadaf47ad9134 +Author: Chris Wilson +Date: Tue Feb 26 10:49:42 2013 +0000 + + sna: Only use the GPU bo after migrating + + If we choose not to migrate the damage to the GPU bo, then it will be + incoherent. This just flattens the logic out as priv->gpu_bo should be + NULL here anyway. + + Signed-off-by: Chris Wilson + +commit 1068bf7024d8a6650de020e95efdedcbfd7d3c5e +Author: Chris Wilson +Date: Tue Feb 26 10:14:03 2013 +0000 + + sna: Mention if compiled as 64bit as part of the CPU feature detection + + Signed-off-by: Chris Wilson + +commit 27c71027b1d76979460ef15bba8e8671e3286a24 +Author: Chris Wilson +Date: Tue Feb 26 10:00:29 2013 +0000 + + sna: Ignore SSE4a - not an Intel ISA! + + Signed-off-by: Chris Wilson + +commit 2a6f3989ba2075c322cdf6e33f829f4d5a885be0 +Author: Chris Wilson +Date: Tue Feb 26 09:59:34 2013 +0000 + + sna/gen3: Allow conditional use of SSE2 + + Signed-off-by: Chris Wilson + +commit 13461a18b1605feb17304d52136d100df50ca296 +Author: Chris Wilson +Date: Tue Feb 26 09:41:14 2013 +0000 + + sna: Print detected CPU features + + Signed-off-by: Chris Wilson + +commit 528dbf9ebb2688f476ef283be59d0f2232159dcb +Author: Chris Wilson +Date: Tue Feb 26 08:15:47 2013 +0000 + + sna: Fix build on older GCC for cpuid() + + We need to double check that the features we look for are supported by + the compiler before doing so. + + Signed-off-by: Chris Wilson + +commit 49d9c5e9d48d043a8366b6471128c999b5e887b0 +Author: Chris Wilson +Date: Tue Feb 26 00:27:12 2013 +0000 + + sna: Reverse inverted assertions + + Oops, the assertions that we had sufficient free space was inverted. + + Signed-off-by: Chris Wilson + +commit 94b95cc2fc63457903a7b7b6eaa09bc27f25750c +Author: Chris Wilson +Date: Tue Feb 26 00:02:16 2013 +0000 + + sna/gen4+: Begin specialising vertex programs for ISA + + Allow use of advanced ISA when available by detecting support at + runtime. This initial work just uses GCC to emit varying ISA, future + work could use hand written code for these hot spots. + + Signed-off-by: Chris Wilson + +commit f095678125b25aeae80d838729a7f89d09007e10 +Author: Chris Wilson +Date: Mon Feb 25 23:14:12 2013 +0000 + + test: Correct ignore path for async.avi + + Signed-off-by: Chris Wilson + +commit aa045d80ec0d3366745d1671b9f667cec587d804 +Author: Chris Wilson +Date: Mon Feb 25 23:13:23 2013 +0000 + + sna: Detect available instruction sets at runtime + + Signed-off-by: Chris Wilson + +commit 56fd91fc830d7a210e3a0e70ab41261a1f5baa83 +Author: Chris Wilson +Date: Mon Feb 25 15:18:46 2013 +0000 + + sna/gen3+: Restart vertex space checks after lock contention + + If we end up contending for the vertex lock, we need to double check + there is sufficient vertex space left for us. + + Bugzill: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1124576 + Signed-off-by: Chris Wilson + +commit b12f0da0bedb7faf0c96e44ca2d02baec807ad51 +Author: Chris Wilson +Date: Mon Feb 25 15:18:46 2013 +0000 + + sna/gen3+: Assert that nbox is not 0 + + Various assertions to track down a potential programming error. + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1124576 + Signed-off-by: Chris Wilson + +commit 6f9646f5beecca2972ef0299b5c7469008cb6fe4 +Author: Chris Wilson +Date: Mon Feb 25 14:36:32 2013 +0000 + + sna/trapezoids: Instruct the compiler to flatten the callees whilst rasterising + + Signed-off-by: Chris Wilson + +commit 421910ca572a044170af69a90bb934f114a62168 +Author: Chris Wilson +Date: Sun Feb 24 21:58:30 2013 +0000 + + sna/gen3: Factor out the per-vertex divide for gradients + + Signed-off-by: Chris Wilson + +commit a19da0ea517127052ae49cdd6441e8b6077ca523 +Author: Chris Wilson +Date: Sun Feb 24 11:22:01 2013 +0000 + + sna: Reduce DefaultDepth to 16 on older chipsets + + Signed-off-by: Chris Wilson + +commit d7bba8512c6db5f58448b513d1f4290938b0abd3 +Author: Chris Wilson +Date: Sat Feb 23 10:56:08 2013 +0000 + + sna: Tidy a call to set the gamma before setting up a CRTC + + Signed-off-by: Chris Wilson + +commit e2aaf4ed3333231cf8cadcf6362743593026cd19 +Author: Carl Worth +Date: Fri Feb 22 14:44:09 2013 -0800 + + Refuse to load driver for depth-8 X server. + + The driver is not functional at this depth, so tell the user as much and + bail out. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31375 + + Reviewed-by: Eric Anholt + +commit cbd8f16ea0e3b1b7eae57edfe343a332ae42373c +Author: Chris Wilson +Date: Fri Feb 22 21:09:52 2013 +0000 + + sna: Refuse to create larger than max temporary upload bo + + The maximum size is determined by available RAM, if we exceed it we + greatly increase the risk of swap thrashing. + + Signed-off-by: Chris Wilson + +commit 7a264792772512528a4d6138e09b4ee1ace7f322 +Author: Chris Wilson +Date: Fri Feb 22 20:13:58 2013 +0000 + + sna: Retire before looking for a large 2D buffer + + Signed-off-by: Chris Wilson + +commit 630b114f1ceaf9fb1e35f3aac8c3161119ba5af9 +Author: Chris Wilson +Date: Fri Feb 22 20:08:36 2013 +0000 + + sna: Allow search_linear_cache() to reuse large buffers + + Signed-off-by: Chris Wilson + +commit d87a0b4c3bc7f1a33edee79e3ed09871461422ea +Author: Chris Wilson +Date: Fri Feb 22 20:07:56 2013 +0000 + + sna: Allow picture fixup in channel format if not changing RGB depth + + Signed-off-by: Chris Wilson + +commit b129b434f98b9d875e44af206f6901de9bf28334 +Author: Chris Wilson +Date: Fri Feb 22 12:10:20 2013 +0000 + + sna: Optimise mmap of GPU bo for read-read operations + + Signed-off-by: Chris Wilson + +commit 19bd005056a2083de64753681b96716996e4237d +Author: Chris Wilson +Date: Fri Feb 22 12:05:04 2013 +0000 + + sna: Avoid migrating and making the GPU bo busy prior to mmapping it + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1131134 + Signed-off-by: Chris Wilson + +commit afb77ffadedf6c6f9321dde1d650004714accdc4 +Author: Chris Wilson +Date: Fri Feb 22 10:48:06 2013 +0000 + + sna/gen7: Skip CLEAR_PARAMS for the null depthbuffer + + Signed-off-by: Chris Wilson + +commit 1a7262e5308c9ab416ed87226ed27a9fc84f0ef9 +Author: Chris Wilson +Date: Fri Feb 22 10:30:49 2013 +0000 + + sna/gen7: Only a pipeline stall is required for the CA pass + + Signed-off-by: Chris Wilson + +commit b0c83b77d0226cbaf6115eed5d0e2cc8a40ac51d +Author: Chris Wilson +Date: Thu Feb 21 19:37:51 2013 +0000 + + sna/dri: Eradicate the DRI2 name exchange mechanism + + Thinking about the compositor <-> server <-> client inter-exchange + demonstrates that we cannot prevent the client rendering into the + source texture being show by the compositor. That is a subject for DRI3. + + Signed-off-by: Chris Wilson + +commit 6172ff3e350dbfbcd122a911d7fa366ff5d268bc +Author: Chris Wilson +Date: Thu Feb 21 15:34:47 2013 +0000 + + sna: Always enable the solid-cache and gradient-cache + + Figuring out when it might not be used is simply too error prone. + + Signed-off-by: Chris Wilson + +commit b7a96df9b0872867c823dc945add5be04d51c30a +Author: Chris Wilson +Date: Wed Feb 20 18:46:01 2013 +0000 + + sna: Honour LinearFramebuffer + + The Option was untested, and unsurprisingly was broken. + + Signed-off-by: Chris Wilson + +commit d2442c74b8d41018f260f1da13f3fe5d2795792f +Author: Chris Wilson +Date: Wed Feb 20 10:53:57 2013 +0000 + + 2.21.3 release + +commit 2cab7e80eb6955a7f8ea051633f6975a12248b69 +Author: Chris Wilson +Date: Wed Feb 20 12:36:22 2013 +0000 + + sna/trapezoids: Clamp cells to valid range + + Signed-off-by: Chris Wilson + +commit 14de90b251dd8a6ff106e989580ef01cf5c2944d +Author: Chris Wilson +Date: Wed Feb 20 12:00:54 2013 +0000 + + sna/trapezoids: Embed a few cells into the stack + + Avoid an allocation in the common case where the set of trapezoids is + fairly narrow. + + Signed-off-by: Chris Wilson + +commit 3eca4ea1a5d8ce04598b8d42e93e0dcb93e42e9a +Author: Chris Wilson +Date: Wed Feb 20 11:20:54 2013 +0000 + + sna/trapezoids: Perform the cell allocation upfront + + As we know the maximum extents of the trapezoids, we know the maximum + number of cells we will need and so can preallocate them. + + Signed-off-by: Chris Wilson + +commit 9df5e48c582e5c4edffdece75b5395c230a50b09 +Author: Chris Wilson +Date: Tue Feb 19 10:08:29 2013 +0000 + + sna/video: Only setup XvMC if we first setup Xv + + Under certain circumstances, XvScreenInit can indeed fail, so do not + bother with creatin XvMC (as it triggers internal assertions if it + cannot find our adaptor amongst Xv's). + + Signed-off-by: Chris Wilson + +commit b6588c48077600a3e015b6d37b101393a806ae1a +Author: Chris Wilson +Date: Tue Feb 19 08:59:12 2013 +0000 + + test: Add generated vsync.avi to gitignore + +commit 1e2fd66ade6bdbf1e6011f3d59e423fada3f12f6 +Author: Chris Wilson +Date: Tue Feb 19 08:57:47 2013 +0000 + + sna: Assert that the GPU damage is NULL before destroy a proxy + + If the GPU bo is a proxy, then it really is a pointer into a upload + buffer for CPU data. In these cases, there should never be any GPU + damage lying around. + + Signed-off-by: Chris Wilson + +commit d90a123db7ac99cf017167bf89df31c635df7e1e +Author: Chris Wilson +Date: Mon Feb 18 20:06:45 2013 +0000 + + sna: Assert that the gpu_bo exists if it is entirely damaged + + This should help catch the error slightly earlier. + + Signed-off-by: Chris Wilson + +commit a03aba6f7f55577e29c6a3267528e2614016222d +Author: Chris Wilson +Date: Mon Feb 18 16:12:14 2013 +0000 + + sna: A couple more assertions that we forcibly attach pixmaps correctly + + Signed-off-by: Chris Wilson + +commit 1f16d854264ea923303b79379266bd789fd9dd4d +Author: Chris Wilson +Date: Mon Feb 18 14:30:55 2013 +0000 + + sna/dri: Prevent swapping a decoupled DRI2Buffer + + If the DRI2Buffer is no longer valid for the Drawable, for example the + window had just been reparent, just complete the swap without triggering + any assertions. + + Signed-off-by: Chris Wilson + +commit b3ba758a0186c9abc6c0583f52775ea714165134 +Author: Damien Lespiau +Date: Thu Feb 14 14:20:19 2013 +0000 + + uxa/gen7: Don't use a message register to store vl + + Turns out the "new" assembler that uses mesa's opcode emission hits the + path that automatically transforms MRF registers into GRF ones in the + exa_wm_src_projective shader. + + The diff with the new assembler is: + + $ intel-gen4disasm -g7 - + - { 0x00600041, 0x208077be, 0x008d03c0, 0x008d0180 }, + + { 0x00600041, 0x2e8077bd, 0x008d03c0, 0x008d0180 }, + mul(8) m4<1>F g30<8,8,1>F g12<8,8,1>F { align1 }; + mul(8) g116<1>F g30<8,8,1>F g12<8,8,1>F { align1 }; + + Of course, message registers are no more in gen7, so the shader is + trying to do something shaddy (ahem!). + + Instead of using m4, let's make exa_wm_src_projective use g68 for v (aka + vl) which makes sense since: + + 1/ vh is g69 + 2/ exa_wm_src_affine uses g68 for vl already + + This commit changes the generated assembly, here's the decoded diff: + + $ intel-gen4disasm -g7 - + - { 0x00600041, 0x208077be, 0x008d03c0, 0x008d0180 }, + + { 0x00600041, 0x288077bd, 0x008d03c0, 0x008d0180 }, + mul(8) m4<1>F g30<8,8,1>F g12<8,8,1>F { align1 }; + mul(8) g68<1>F g30<8,8,1>F g12<8,8,1>F { align1 }; + + Cc: Kenneth Graunke + Reported-by: Xiang, Haihao + Signed-off-by: Damien Lespiau + Reviewed-by: Kenneth Graunke + +commit 43ba22ef4a4142f334e9ae2d926250988ecbe8bc +Author: Chris Wilson +Date: Sun Feb 17 09:25:38 2013 +0000 + + Confirm that i915.ko has KMS enabled before binding to the device + + If the kernel has the module, but the KMS module option is not enabled, + we cannot function. So after checking to see if the i915.ko is bound, + then querying whether it provides any KMS resources. If it has no CRTCs + attached, then we need to failover to the VESA/fbdev drivers. Note that + this should have been detected by drmCheckModesettingSupported() + + References: https://bugs.freedesktop.org/show_bug.cgi?id=60987 + Signed-off-by: Chris Wilson + +commit 5a5943e2374a674067e0c48b0fe8a1f2eeff2177 +Author: Chris Wilson +Date: Fri Feb 15 12:05:14 2013 +0000 + + NEWS: Xserver 1.6 was not packaged in Xorg 7.7 + + I misinterpreted Sedat Dilek's advice on how to fix my confusing + changelog, so drop the Xorg 7.7 confusion and just refer to the version + of Xserver the driver is first compatible with. + +commit 15e1050ea505c40a288ec197d817d3c6d51693d5 +Author: Chris Wilson +Date: Thu Feb 14 21:59:36 2013 +0000 + + NEWS: Fix a couple of typos and factual errors + + Sedat Dilek corrected my spelling and pointed out that what is known as + Xorg 1.6 in the log file is actually better known as releases of + Xserver 1.6 and Xorg 7.7. + +commit 86e025a1842f3c2f319676818b1f4624cd94ebc5 +Author: Chris Wilson +Date: Wed Feb 13 22:05:34 2013 +0000 + + sna/gen4: Restore nonrectiinear spans workaround + + Instead of relying on the macro, the intention was simply to use the + prefer_gpu hint. However, I dropped it whilst refactoring ideas from + later generations. So restore both the debug control to force spans as + well as the intended workaround. + + Reported-by: Edward Sheldrake + Signed-off-by: Chris Wilson + +commit f2a64dbdfceac985d235c4873f52013633d6cfd8 +Author: Chris Wilson +Date: Wed Feb 13 17:15:46 2013 +0000 + + sna: Avoid stalling on a SHM upload when otherwise idle + + Fixes regresion from + + commit 09ea1f4402b3bd0e411b90eb5575b3ff066d7356 + Author: Chris Wilson + Date: Thu Jan 10 16:26:24 2013 +0000 + + sna: Prefer to use the GPU for copies from SHM onto tiled destinations + + As the stalls on IVB 64-bit machines at least greatly offset the + benefits. As those earlier measurements were made on the same IVB + machine but running in 32-bit mode, I need to double-check whether or + not this is another 32-bit peculiarity. + + Signed-off-by: Chris Wilson + +commit 4bf51ec7bcc7818fbee8643a88aebee0362691b2 +Author: Chris Wilson +Date: Wed Feb 13 16:32:18 2013 +0000 + + Revert "sna: Avoid promoting SHM CPU bo to GPU to maintain coherence with SHM clients" + + This reverts commit f743cd5734ca502aa8bdb0e1327fe84d6ce82755. + +commit 9861423a76402c260724a752ada293a03ce1a79b +Author: Chris Wilson +Date: Wed Feb 13 15:11:45 2013 +0000 + + sna/dri: Fix typo limiting gen4 to TILING_X depth buffers + + Fixes regression from + + commit 98b312e579385e6e4adf6bf0abe20f8ca84592af + Author: Chris Wilson + Date: Wed Jan 23 20:51:35 2013 +0000 + + sna/dri: Stop feeding I915_TILING_Y to mesa i915c + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60178 + Signed-off-by: Chris Wilson + +commit 38a3506aa1c9c2e07125b54fc319b6de89febff9 +Author: Chris Wilson +Date: Wed Feb 13 14:09:38 2013 +0000 + + sna: Handle scanouts still active at the time of destruction + + Basically remove the bogus assert, and reorder the list to + preferentially reuse the still active scanouts. + + Signed-off-by: Chris Wilson + +commit 3b82d93162b9e127c6d055d5007e75fcc31f4af8 +Author: Chris Wilson +Date: Tue Feb 12 21:53:38 2013 +0000 + + sna/dri: Validate that the scanout flag is set + + Signed-off-by: Chris Wilson + +commit 04e4805f57fdf0581e5e75c29c275c15c79852a3 +Author: Chris Wilson +Date: Tue Feb 12 21:52:35 2013 +0000 + + sna: Prefer inplace readback if the GPU doesn't support cacheable BLTs + + As we must perform the GTT reads anyway, first see if we can copy + directly to the destination. + + Signed-off-by: Chris Wilson + +commit 2c569d22d2d243badc15d5dbcc09e6759f4ff01a +Author: Chris Wilson +Date: Tue Feb 12 20:15:33 2013 +0000 + + sna: Only use the inplace read fallback if we have no CPU bo support + + Signed-off-by: Chris Wilson + +commit aeaed0b7810e9c794749a4f59c72790063cddc86 +Author: Chris Wilson +Date: Tue Feb 12 19:30:44 2013 +0000 + + sna/dri: Assert that we are not passed deceased DRI2Buffers + + Signed-off-by: Chris Wilson + +commit 5fb165b02d47634ccf9fb72ab6fb4d65b89f78d0 +Author: Chris Wilson +Date: Mon Feb 11 22:15:17 2013 +0000 + + sna/dri: Assert that the old scanout is clear before overwriting + + Signed-off-by: Chris Wilson + +commit 2667b821e193c0badf16420f82f8a99a93c27a46 +Author: Chris Wilson +Date: Mon Feb 11 22:06:00 2013 +0000 + + sna/dri: Update flush status for tear-free exported GPU bo + + Signed-off-by: Chris Wilson + +commit a4442045df9164651702b166e0de2bfd25e8a76f +Author: Chris Wilson +Date: Mon Feb 11 21:16:19 2013 +0000 + + sna/dri: Harden the replacement of the back buffer against alloc failure + + Signed-off-by: Chris Wilson + +commit 75406775b83ca5c320e4bc2d2dbd8f1eb0d1677d +Author: Chris Wilson +Date: Mon Feb 11 13:00:13 2013 +0000 + + NEWS: Fix marketing name for 945gm + + The GMA3100 was the desktop G31/G33 which whilst almost identical to the + GMA950, notably does not require the extra unfenced alignment. + + Signed-off-by: Chris Wilson + +commit 0b116a1d023ad7cc148d91f268dbf71452dbd9dd +Author: Chris Wilson +Date: Mon Feb 11 12:36:43 2013 +0000 + + sna: Fix inaccurate use of __attribute__((const)) + + 'const' is only allowed to use the function parameters and not allowed + to access global memory - that includes not allowed to deference its + arguments... + + Thanks to Jiri Slaby for spotting my mistake. + + Signed-off-by: Chris Wilson + +commit 47657e5355103b2e61da6f059c560e63fe13b0ed +Author: Chris Wilson +Date: Mon Feb 11 12:31:18 2013 +0000 + + sna/dri: Ignore a compiler barf breaking an assertion + + Manual confirmation with gdb says all is fine and things work again + after printing the variables responsible. The curious reader is welcome + to read the disassembly to find where the compiler goofed. + + Signed-off-by: Chris Wilson + +commit 3540554e5a74ccd2ca746482700a9f5657954227 +Author: Chris Wilson +Date: Mon Feb 11 11:14:17 2013 +0000 + + sna/dri: Couple up the flush pixmap after checking for allocation failures + + Tidy up the error path not to leave the GPU bo pinned and marked for + flushing. + + Signed-off-by: Chris Wilson + +commit 58b61bcd02467d2b08b2dd194ab6884437b83fa6 +Author: Chris Wilson +Date: Mon Feb 11 11:05:02 2013 +0000 + + sna/dri: Tighten the assertions that we have one DRI2Buffer per Pixmap + + Signed-off-by: Chris Wilson + +commit a13f806ae28459a5cf671ccbf9cc8725f541a4ba +Author: Chris Wilson +Date: Mon Feb 11 10:50:20 2013 +0000 + + sna: Assert that we do not destroy a GPU bo for an active DRI pixmap + + This is an extra paranoid check that the bo is still pinned. + + Signed-off-by: Chris Wilson + +commit c2eb2db83280ae45b8df8a3b6e488b6a1404391a +Author: Chris Wilson +Date: Mon Feb 11 10:47:13 2013 +0000 + + sna: Avoid stalling for changing cache levels on an active scanout + + Signed-off-by: Chris Wilson + +commit 696347a6260f3741ad3e6238db0fd285384bb753 +Author: Chris Wilson +Date: Mon Feb 11 09:58:58 2013 +0000 + + sna/dri: Only clear the GPU bo flush flag when the last export is destroyed + + Add various assertions around DRI to be sure that we don't change the + GPU bo for a pixmap that does not match our flush bookkeeping. Then be + more careful during the DRI2Buffer destroy that we don't accidentally + remove the flush flag from a shared bo. + + Signed-off-by: Chris Wilson + +commit 301aebfa71143fb610eb7b816376a8c1f3e07208 +Author: Chris Wilson +Date: Sun Feb 10 18:01:33 2013 +0000 + + configure: Add -lX11 required to link the legacy libI810XvMC.so + + Signed-off-by: Chris Wilson + +commit 65c320e677b8ab4d745568b33f381d5865bf8b73 +Author: Chris Wilson +Date: Sun Feb 10 14:20:59 2013 +0000 + + 2.21.2 release + +commit 0d75b19979b1ac14353765e2bb84c6a466129109 +Author: Chris Wilson +Date: Sun Feb 10 15:47:53 2013 +0000 + + sna: Restore glyphs with xorg-1.12 + + That simple and innocuous build fix for xorg-1.13 bizarrely causes + missing glyphs with earlier Xorgs. + + Signed-off-by: Chris Wilson + +commit 9fd0d8873a5a5c4f77904cab0b9909ca941b5dae +Author: Chris Wilson +Date: Sun Feb 10 14:29:29 2013 +0000 + + NEWS: fix bug url + + The dangers of cutting and pasting from git log. + + Signed-off-by: Chris Wilson + +commit 617fadf3acf7bf75fb203c1e85fd0ddb98b3dbb9 +Author: Chris Wilson +Date: Sun Feb 10 14:20:59 2013 +0000 + + 2.21.1 release + +commit 3169a4e53cf39cc3d5c18ac6add909aa3a58de7e +Author: Chris Wilson +Date: Sun Feb 10 11:57:14 2013 +0000 + + sna: Reorder some includes so that compat-api.h comes after the headers it wraps + + Fixes the build in cases where the compat-api.h was defining macros to + subvert the real functions found in the xorg includes + + Signed-off-by: Chris Wilson + +commit 71fbad64c5cfe6832a03815bece4c89d15253e1a +Author: Chris Wilson +Date: Sun Feb 10 10:54:17 2013 +0000 + + configure: Fix typo in checking for libdrm_intel + + The package name is libdrm_intel not libdrm_intel-1, an obvious + cut'n'paste error from testing for pixman-1. + + Signed-off-by: Chris Wilson + +commit 3cbdfb54d1fcfed7745111e861e19b7bbac243cc +Author: Chris Wilson +Date: Sat Feb 9 19:15:20 2013 +0000 + + sna: Backport to squeeze - Xorg-1.6, pixman-0.16, libdrm-2.4.21 + + The principle change is to switch to the old Privates API and undo the + Region renames. + + The downside is that this ignores the critical bugfixes made to the + xserver since xorg-1.6 - but I assume that whoever wants to run the + latest hardware on the old xservers is also backporting those stability + fixes... + + Signed-off-by: Chris Wilson + +commit 42a6b25817985e22e7d462be87fbd97973d96a29 +Author: Chris Wilson +Date: Sat Feb 9 15:30:58 2013 +0000 + + sna: Fix alignment of the base of partial buffers for pre-G33 chipsets + + The older chipsets have much more restrictive alignment rules for the + base address of tiled but unfenced objects. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1120108 + Signed-off-by: Chris Wilson + +commit 80044e54634d0836694d5aa6f98ce22fe38d367f +Author: Chris Wilson +Date: Sat Feb 9 09:57:26 2013 +0000 + + sna: Promote to GPU is only partially damaged on the CPU but busy on the GPU + + Signed-off-by: Chris Wilson + +commit d18cb72a94fad0ee99ab361c21d643c927d29c35 +Author: Chris Wilson +Date: Fri Feb 8 22:31:19 2013 +0000 + + sna: Randomly perturb 'wedged' to hunt for faults + + Signed-off-by: Chris Wilson + +commit ce9f0448367ea6a90490a28150bfdc0a76500129 +Author: Chris Wilson +Date: Fri Feb 8 16:01:54 2013 +0000 + + sna/gen6: Use GT2 settings for both GT2 and GT2+ + + Signed-off-by: Chris Wilson + +commit ae5399aaf9ef57d33e8fd957e8a96964897c09b3 +Author: Chris Wilson +Date: Fri Feb 8 11:31:21 2013 +0000 + + sna: Force the fallback path for unaccelerated randr damage + + Signed-off-by: Chris Wilson + +commit c69b4389abc324533a9a311c17a667bf8a1e1673 +Author: Chris Wilson +Date: Thu Feb 7 22:54:37 2013 +0000 + + sna/gen4: Split the have_render flag in separate prefer_gpu hints + + The idea is to implement more fine-grained checks as we may want + different heuristics for desktops with GT1s than for mobile GT2s, etc. + + Signed-off-by: Chris Wilson + +commit bec99de812ce6a1bbc2c8e4cfd05f4f74c560ea6 +Author: Chris Wilson +Date: Fri Feb 8 00:53:10 2013 +0000 + + sna: Remove the bogus assertions on buffer domains + + Just a few lines earlier we already have the correct assertion that the + buffer was not in the GPU domain, so had these two been correct, they + would have still been redundant. + + Signed-off-by: Chris Wilson + +commit 8d1d3c6e6102ff20fbff74ec6b3b2e94ee757015 +Author: Chris Wilson +Date: Thu Feb 7 14:47:07 2013 +0000 + + sna: Fixup an invalid assertion + + We may choose to operate inplace on a buffer last used by the CPU if we + are discarding all the existing damage. + + Signed-off-by: Chris Wilson + +commit c405dba367bdca51221bd2464213199783dc18fe +Author: Chris Wilson +Date: Thu Feb 7 13:41:42 2013 +0000 + + sna: Also assert that the GPU is not wedged before continuing a batch + + Signed-off-by: Chris Wilson + +commit feeff6fcefccdca5335fea55c2fdbf8a4004c175 +Author: Chris Wilson +Date: Thu Feb 7 13:33:58 2013 +0000 + + sna: Force GTT readback if the GPU is wedged + + Signed-off-by: Chris Wilson + +commit 8a272971d5971a56f57dde00dceb082d0b142c8c +Author: Chris Wilson +Date: Wed Feb 6 17:59:10 2013 +0000 + + sna: Allow inplace uploads to utilise GTT on LLC machines + + Rather than arbitrarily disable the fallback paths for LLC, allow it to + utilise any available GTT buffers for inplace uploads. The best + explanation so far is that with the streaming is that we are trashing + the LLC. On other machines, the difference is in the noise. + + Signed-off-by: Chris Wilson + +commit bc8a2c30c4f6bb9ce751b6717a3a2feaea0d6d4b +Author: Chris Wilson +Date: Thu Feb 7 10:42:58 2013 +0000 + + sna: Only try the SRC fixup into the buffer if it is CPU mapped + + On one particular machine, this operation is behaving as if it is + reading back UC memory during the explicit write-only composite. + + Signed-off-by: Chris Wilson + +commit 889ed28f52bccdbc54692ea075f95f9635a8d58a +Author: Chris Wilson +Date: Thu Feb 7 10:42:21 2013 +0000 + + sna: Correctly align used buffers to the following page boundary + + Signed-off-by: Chris Wilson + +commit 974b6a97d78dadf09be8a2c4f61020f15d80d558 +Author: Chris Wilson +Date: Wed Feb 6 17:02:27 2013 +0000 + + sna: Fallback to non-LLC paths after an allocation failure for an LLC buffer + + Signed-off-by: Chris Wilson + +commit 5c8084ef04cb0a7da064fb1e13c8ef7dae528b1b +Author: Chris Wilson +Date: Wed Feb 6 16:39:31 2013 +0000 + + intel: Becareful not to match UMS against future generations + + Signed-off-by: Chris Wilson + +commit be241fb25ed0a8d41a642ea811253207f88d0962 +Author: Chris Wilson +Date: Wed Feb 6 16:38:12 2013 +0000 + + sna: Free the handle after pwrite buffer allocation failure + + Having just allocated the handle, we need to free it if we then fail to + allocate memory for the buffer. + + Signed-off-by: Chris Wilson + +commit 4b3b25f0be33d3af3ccecfb3193fc2d365445fdf +Author: Chris Wilson +Date: Wed Feb 6 16:37:21 2013 +0000 + + sna: Flush our caches if we fail to mmap an object + + The likely cause for a mmap failure is that we hold too many objects + open or have exhausted our address space. In both cases, we need to trim + our caches before continuing. + + Signed-off-by: Chris Wilson + +commit daba1ae3e7f0532cc53d9a5178778dbaec203052 +Author: Chris Wilson +Date: Wed Feb 6 16:17:36 2013 +0000 + + sna: Correctly handle failure to CPU map a new allocation + + If we fail to CPU map, we want to fallback to just using pwrite with + normal memory. + + Signed-off-by: Chris Wilson + +commit 0adb0b5e1ebcf3ddfeddae99d96912ec4c090832 +Author: Chris Wilson +Date: Wed Feb 6 16:02:30 2013 +0000 + + sna: Handle mapped buffer allocation failure for LLC + + The presumption was that if we had LLC we would have allocated the + buffer by that point - however, it was remotely possible to have fallen + through and so we need to handle those cases. + + Signed-off-by: Chris Wilson + +commit f4cff22afae598f41adf36cd149223d1f7dd6b6e +Author: Chris Wilson +Date: Wed Feb 6 15:15:36 2013 +0000 + + sna: Relax the buffer size assertion to only be larger than required + + Not all paths request alloc pages, a few just request sufficient pages + for the original size. So we can only assert that condition is + satisfied. + + Signed-off-by: Chris Wilson + +commit 8bc593c732a2f1ccd1bdabc071c709a44222db61 +Author: Chris Wilson +Date: Wed Feb 6 15:11:00 2013 +0000 + + sna: Make sure we always replace io buffers before inserting into the cache + + Signed-off-by: Chris Wilson + +commit 5f72158919098dd5684d1c56d1ba643cc3be2c7d +Author: Chris Wilson +Date: Wed Feb 6 15:10:23 2013 +0000 + + configure: XvMC support is optional, so make failure to find xcb non-fatal + +commit cd6d8f9b9df02934ebfff76cb40410c8ce3887dd +Author: Chris Wilson +Date: Wed Feb 6 10:37:50 2013 +0000 + + xvmc: Add the complementary XCB_CFLAGS + + After splitting the xvmc dependences into xcb and non-xcb, we then also + have to add the xcb CFLAGS to build libIntelXVmc.la + + Reported-by: Julien Cristau + Signed-off-by: Chris Wilson + +commit b96ee47ad97943c3dccd40d9570e29002dc3d85f +Author: Paul Menzel +Date: Sun Feb 3 13:33:08 2013 +0100 + + configure.ac: Split out XCB libraries from `XVMCLIB` into `XCB` + + Building the package under Debian Sid/unstable, `dh_shlibdeps` informs + that `libI810XvMC.so.1.0.0` does not need to be linked against + `libX11-xcb.so.1`, `libxcb-dri2.so.0`, `libxcb-util.so.0` or + `libxcb.so.1` [1]. + + $ debuild -b -us -uc + […] + make[1]: Entering directory `/src/xserver-xorg-video-intel' + dh_shlibdeps -- --warnings=6 + dpkg-shlibdeps: Warnung: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 sollte nicht gegen libX11-xcb.so.1 gelinkt werden (es verwendet keines der Bibliotheks-Symbole) + dpkg-shlibdeps: Warnung: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 sollte nicht gegen libxcb-dri2.so.0 gelinkt werden (es verwendet keines der Bibliotheks-Symbole) + dpkg-shlibdeps: Warnung: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 sollte nicht gegen libxcb-util.so.0 gelinkt werden (es verwendet keines der Bibliotheks-Symbole) + dpkg-shlibdeps: Warnung: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 sollte nicht gegen libxcb.so.1 gelinkt werden (es verwendet keines der Bibliotheks-Symbole) + make[1]: Leaving directory `/src/xserver-xorg-video-intel' + […] + + Moving `x11-xcb`, `xcb-dri2` and `xcb-aux` from `XVMCLIBS` into `XCB` + and adding `XCB_LIBS` only to the `LIBADD` variables of `libIntelXvMC` + makes the warnings go away and the libraries are still built without any + issues. + + make[1]: Entering directory `/src/xserver-xorg-video-intel' + dh_shlibdeps -- --warnings=6 + make[1]: Leaving directory `/src/xserver-xorg-video-intel' + dh_installdeb -O--builddirectory=build/ + dh_xsf_substvars -O--builddirectory=build/ + dh_gencontrol -O--builddirectory=build/ + dpkg-gencontrol: Warnung: Feld Depends von Paket xserver-xorg-video-intel-dbg: unbekannte Substitutionsvariable ${shlibs:Depends} + dh_md5sums -O--builddirectory=build/ + dh_builddeb -O--builddirectory=build/ + dpkg-deb: Paket »xserver-xorg-video-intel« wird in »../xserver-xorg-video-intel_2.19.0-6.1_i386.deb« gebaut. + dpkg-deb: Paket »xserver-xorg-video-intel-dbg« wird in »../xserver-xorg-video-intel-dbg_2.19.0-6.1_i386.deb« gebaut. + dpkg-genchanges -b >../xserver-xorg-video-intel_2.19.0-6.1_i386.changes + dpkg-genchanges: rein binärer Upload - es ist kein Quellcode hinzugefügt + dpkg-source --after-build xserver-xorg-video-intel + dpkg-buildpackage: Binärpaket(e) hochzuladen (keine Quellen enthalten) + Now running lintian... + W: xserver-xorg-video-intel: hardening-no-relro usr/lib/libI810XvMC.so.1.0.0 + W: xserver-xorg-video-intel: hardening-no-fortify-functions usr/lib/libI810XvMC.so.1.0.0 + W: xserver-xorg-video-intel: hardening-no-relro usr/lib/libIntelXvMC.so.1.0.0 + W: xserver-xorg-video-intel: hardening-no-fortify-functions usr/lib/libIntelXvMC.so.1.0.0 + W: xserver-xorg-video-intel: hardening-no-relro usr/lib/xorg/modules/drivers/intel_drv.so + W: xserver-xorg-video-intel: hardening-no-fortify-functions usr/lib/xorg/modules/drivers/intel_drv.so + N: 1 tag overridden (1 warning) + Finished running lintian. + + The modules were originally added with the following commit present + since tag 2.10.0. + + commit 3e8f2eae3a586aa29be4858698e666e0ec778cea + Author: Eric Anholt + Date: Thu Oct 15 13:48:56 2009 -0700 + + XVMC: Use XCB DRI2 instead of cargo-culting our own copy of Xlib stuff. (v2) + + [1] https://buildd.debian.org/status/fetch.php?pkg=xserver-xorg-video-intel&arch=i386&ver=2%3A2.19.0-6&stamp=1347825458 + + Signed-off-by: Paul Menzel + +commit 93770c709aa7d3719b7c717040b16c8f82d5c207 +Author: Paul Menzel +Date: Tue Jan 22 10:47:22 2013 +0100 + + NEWS: Fix a typo: a*n* inadvertent + +commit a8cfddd280b5220f23565b21c91f3f7dd10bbe91 +Author: Chris Wilson +Date: Tue Feb 5 22:06:03 2013 +0000 + + sna: Tidy buffer allocation size assertions + + Rather than perilously update a local variable with the allocated size, + just use the size of the bo in the assertion that is large enough to + satisfy the allocation request. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 82dc91e8c24a1fbbf03dcf89a3955319b3399ea0 +Author: Chris Wilson +Date: Tue Feb 5 21:50:43 2013 +0000 + + test: Add a very basic blt benchmark + + Signed-off-by: Chris Wilson + +commit 9c80a0337ec12b6baab5aab380503e672e925677 +Author: Chris Wilson +Date: Tue Feb 5 14:56:10 2013 +0000 + + sna: ValleyView uses the same scanline registers as SandyBridge + + Signed-off-by: Chris Wilson + +commit 4c45e3fe456d211afc6ba69878b413a72ef5d0bf +Author: Chris Wilson +Date: Tue Feb 5 14:45:39 2013 +0000 + + intel: add more ValleyView PCI IDs + + Signed-off-by: Chris Wilson + +commit c6101d9d71a86a579ff9771d456b234a38bd80b7 +Author: Chris Wilson +Date: Tue Feb 5 11:02:30 2013 +0000 + + man: Fix a typo s/debuging/debugging/ + + Signed-off-by: Chris Wilson + +commit f33c90f7ada238683433d05492434120d06ea1fc +Author: Chris Wilson +Date: Fri Feb 1 19:34:56 2013 +0000 + + NEWS: Trivial typo s/utilile/utilise/ + +commit 6346c844525c2b3a82c16fe10485b901a2b5ddbc +Author: Chris Wilson +Date: Tue Feb 5 10:17:45 2013 +0000 + + sna/gen4: Remove old single-thread SF w/a + + The alternative of disabling GPU spans seems to be far more effective. + + Signed-off-by: Chris Wilson + +commit 1565917f10d9fb3c7e2e7e273173c38c364b9861 +Author: Chris Wilson +Date: Tue Feb 5 10:11:14 2013 +0000 + + sna/gen4: Disable non-rectilinear GPU span compositing + + This seems to be the primary victim of the render corruption, so disable + until the root cause is fixed. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit 37bc822190f36be7b021167ba4d306bbcd97957b +Author: Damien Lespiau +Date: Fri Jan 18 14:13:08 2013 +0000 + + build: Make generation of gen code depend on intel-gen4asm + + This way, when a new intel-gen4asm is available (because one just hacked + on it and has installed a new version for instance) the shaders will be + recompiled. This helps catching regressions, testing the latest changes + in the assembler haven't broken too many things. + + Signed-off-by: Damien Lespiau + Signed-off-by: Chris Wilson + +commit 18f8d2291fbb53ac993b926c247ca981e1e5207b +Author: Damien Lespiau +Date: Fri Jan 18 14:13:07 2013 +0000 + + build: Use $(AM_V_GEN) to silence the assembly of gen programs + + Signed-off-by: Damien Lespiau + Signed-off-by: Chris Wilson + +commit eea535b7e2a35ec4dfa50550b674d4212676d2ee +Author: Damien Lespiau +Date: Fri Jan 18 14:13:06 2013 +0000 + + build: Make autoreconf honour ACLOCAL_FLAGS + + When running autoreconf, it's possible to give flags to the underlying + aclocal by declaring a ACLOCAL_AMFLAGS variable in the top level + Makefile.am. + + Putting ${ACLOCAL_FLAGS} there allows the user to set an environment + variable up before running autogen.sh and pull in the right directories + to look for m4 macros, say an up-to-date version of the xorg-util macros. + + Signed-off-by: Damien Lespiau + Signed-off-by: Chris Wilson + +commit 9640640ab02d5de630e903116c1b104752f8b604 +Author: Paul Menzel +Date: Sat Feb 2 11:44:54 2013 +0100 + + configure.ac: Do not include `xext` and `xfixes` in `XVMCLIB` + + Building the package under Debian Sid/unstable, `dh_shlibdeps` informs + that `libIntelXvMC.so.1.0.0` does not need to be linked against + `libXext.so.6` or `libXfixes.so.3` [1]. + + $ debuild -b -us -uc + […] + make[1]: Entering directory `/build/buildd-xserver-xorg-video-intel_2.19.0-6-i386-9thLfo/xserver-xorg-video-intel-2.19.0' + dh_shlibdeps -- --warnings=6 + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libIntelXvMC.so.1.0.0 should not be linked against libXext.so.6 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libIntelXvMC.so.1.0.0 should not be linked against libXfixes.so.3 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 should not be linked against libXext.so.6 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 should not be linked against libXfixes.so.3 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 should not be linked against libX11-xcb.so.1 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 should not be linked against libxcb-dri2.so.0 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 should not be linked against libxcb-util.so.0 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 should not be linked against libxcb.so.1 (it uses none of the library's symbols) + dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/xserver-xorg-video-intel/usr/lib/libIntelXvMC.so.1.0.0 debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 were not linked against libXext.so.6 (they use none of the library's symbols) + dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/xserver-xorg-video-intel/usr/lib/libIntelXvMC.so.1.0.0 debian/xserver-xorg-video-intel/usr/lib/libI810XvMC.so.1.0.0 were not linked against libXfixes.so.3 (they use none of the library's symbols) + make[1]: Leaving directory `/build/buildd-xserver-xorg-video-intel_2.19.0-6-i386-9thLfo/xserver-xorg-video-intel-2.19.0' + dh_installdeb -a -O--builddirectory=build/ + […] + + Not populating `XVMCLIB` with `xext` and `xfixes` makes the warning go + away and the libraries are still built without any issues. + + [1] https://buildd.debian.org/status/fetch.php?pkg=xserver-xorg-video-intel&arch=i386&ver=2%3A2.19.0-6&stamp=1347825458 + + Signed-off-by: Paul Menzel + +commit 9807bba950078d86a25b91064ecfebaa0ee459e3 +Author: Chris Wilson +Date: Fri Feb 1 18:25:48 2013 +0000 + + sna: Drop bogus refcnt assertion during kgem_bo_retire() + + As we may call it kgem_bo_sync(), during preparation of the upload + buffer which in turn may operate on an object straight out of the snoop + cache and hence not yet referenced (or in some cases, ever). + + Signed-off-by: Chris Wilson + +commit a5561f13498066922b54af04cc71549322ce0e3b +Author: Chris Wilson +Date: Fri Feb 1 18:05:35 2013 +0000 + + sna: Do not add the INPLACE hint if we have the ASYNC hint set + + If the caller is preparing to use the GPU to rendering into the CPU bo, + it will request an ASYNC migration. In those cases, we do not want to + substitute it with an INPLACE operation. + + Signed-off-by: Chris Wilson + +commit d3ff1cb9d7f788002337b1e6c4c81c58112b85b1 +Author: Chris Wilson +Date: Fri Feb 1 13:46:33 2013 +0000 + + 2.21.0 release + +commit 008f8230a7c47f1249eb51e53b3abf158f2a42bf +Author: Chris Wilson +Date: Fri Feb 1 01:54:52 2013 +0000 + + sna: Assert that if we have GPU damage we have a GPU bo + + Scatter the asserts around the migration points to catch where this + invariant may be untrue. + + Signed-off-by: Chris Wilson + +commit cf0576f87102b1535268691e7e29661b0f9ee73b +Author: Chris Wilson +Date: Fri Feb 1 00:19:21 2013 +0000 + + sna/video: Correct computation of planar frame size + + The total frame size is less than 3 times the subsampled chroma planes + due to the additional alignment bytes. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1104180 + Signed-off-by: Chris Wilson + +commit 268285d9a64fc47fe81fe5bfbfbd1890dad53e1e +Author: Chris Wilson +Date: Thu Jan 31 21:57:41 2013 +0000 + + sna/gen3+: Flush vertex threads before touching global state + + We need to be careful not just when finishing the current vbo to + synchronize with the sharing threads, but also before we emit the batch + state that no other thread will try and do the same. + + Signed-off-by: Chris Wilson + +commit 1239e012ae6d4f00ce73f32d7244905a601170ea +Author: Chris Wilson +Date: Thu Jan 31 19:18:17 2013 +0000 + + sna: Make sure the needs_flush is always accompanied by a tracking request + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 9712f49fddc8be939f77c25fcb907873af44619f +Author: Chris Wilson +Date: Thu Jan 31 18:08:05 2013 +0000 + + sna: Remove stale assertion + + Now the reset is meant to restablish 'rq' if the bo was busy. + + Signed-off-by: Chris Wilson + +commit cd7df0004cf6e423d2ae6c0cf83a84e0031161b4 +Author: Chris Wilson +Date: Thu Jan 31 17:32:57 2013 +0000 + + sna: Pass width/height to composite for rotated displays + + This is essential to handle displays that are too large to be rendered + normally via the 3D pipeline and so that the bounds of the fixup region + are known. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60124 + Signed-off-by: Chris Wilson + +commit 38376b56cfe0dfc603bce48e37432622ef9a0135 +Author: Chris Wilson +Date: Thu Jan 31 17:29:10 2013 +0000 + + sna: Remember to move scanouts to the scanout cache after retiring + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit 0a08de1f02577aef0da289108270c1b35e5d9703 +Author: Chris Wilson +Date: Thu Jan 31 16:39:47 2013 +0000 + + sna: After removing the bo from a batch, check whether it is still busy + + If we transfer a bo to the current batch, then subsequently discard it, + we lose the information about its current active state. Try to recover + this information, by querying the kernel and adding it to the flushing + list if necessary. + + Reported-by: Jiri Slaby + Signed-off-by: Chris Wilson + +commit fff0686342f8ec3b3f3510340e073defdf2fb73f +Author: Chris Wilson +Date: Thu Jan 31 12:40:21 2013 +0000 + + sna/traps: Thread the fallback rectilinear compositor + + Signed-off-by: Chris Wilson + +commit 839542d219bd919c99398d514c1d194d18b78eff +Author: Chris Wilson +Date: Thu Jan 31 12:08:52 2013 +0000 + + sna/traps: Allow inplace compositing for non-GPU buffers and rectilinear traps + + Signed-off-by: Chris Wilson + +commit e329e04b10c88afb40f2fd8fdad5b24b9f7dfc15 +Author: Chris Wilson +Date: Thu Jan 31 11:33:37 2013 +0000 + + sna/traps: Translate the extents for the rasterization threads + + The single-threaded code used the pre-computed width/height and only + required the origin from the bounds. However, the threads need to + allocate memory for themselves based on the computed bounds, and so it + helps if those bounds are then correct (rather than only the top-left + being in local space with the bottom-right in global coordinates). + + Signed-off-by: Chris Wilson + +commit 033f75e5bd94e226e719f87ed4e0091845384679 +Author: Chris Wilson +Date: Thu Jan 31 01:38:01 2013 +0000 + + sna: Stage retirement through the flushing list + + If the kernel replies that a bo is still busy, stage its retirement + through the flushing list to be certain that we never stall on a + subsequent write. + + Signed-off-by: Chris Wilson + +commit 5f5711e62cc4c8ca15782376c4047174299e2db0 +Author: Chris Wilson +Date: Thu Jan 31 01:21:08 2013 +0000 + + sna: Disable dangerous assertions that depend upon external state + + Signed-off-by: Chris Wilson + +commit 42529336fd92d39a5a5eceb07f2838d4be50fa8e +Author: Chris Wilson +Date: Thu Jan 31 00:58:51 2013 +0000 + + sna: Prevent falling back to swrast if source is on the GPU + + Currently if the dst is wholly contained within the CPU, then we try to + continue to operate on the GPU. However, if we have FORCE_GPU set, it + means that one of the sources for the operation resides on the GPU, and + that would require a readback in order to perform the operation on the + CPU. Hence, if we try to use a CPU bo and fail, convert back to using + the GPU bo if forced. + + Signed-off-by: Chris Wilson + +commit c2d06c407e1c2cbbf3f7f6c4989710a799cd43d0 +Author: Chris Wilson +Date: Wed Jan 30 21:17:42 2013 +0000 + + sna: Improve DBG output for damaged slave outputs + + After computing the intersection of the damage with the slave, give the + region extents. + + Signed-off-by: Chris Wilson + +commit 8867aa6a46c33fd2abf3b3f0b1d6115bad6c8017 +Author: Chris Wilson +Date: Wed Jan 30 21:15:55 2013 +0000 + + sna/dri: Handle change of BackBuffer across a pending flip + + If we encounter a delayed flip with a different back buffer than the + current, simply update the info rather than bug out. + + Signed-off-by: Chris Wilson + +commit a31fd03bd4c87c48dc3ca15e3082e29348224b8c +Author: Chris Wilson +Date: Wed Jan 30 17:26:28 2013 +0000 + + sna: Add a bunch of assertions to make sure we do not misplace scanouts + + As scanouts are uncached, they need to be treated carefully and + decontaminated before being placed in the general cache. So double check + that no bo in those caches are still marked as a scanout. + + Signed-off-by: Chris Wilson + +commit 6f1b862282ddb4545987fb9f0a45b528b7b7b5ee +Author: Chris Wilson +Date: Wed Jan 30 15:44:53 2013 +0000 + + sna: Pass the correct WRITE hint when migrating for rendering into the CPU bo + + Signed-off-by: Chris Wilson + +commit 5011ed2e729d46fe3cff5454e15a0fd16441f7e1 +Author: Chris Wilson +Date: Wed Jan 30 15:44:22 2013 +0000 + + sna: Only discard the clear hint when writing inplace to the GPU pixmap + + Signed-off-by: Chris Wilson + +commit 6312f58014c0bb4afa56855be1e9becc3e3cc3d7 +Author: Chris Wilson +Date: Wed Jan 30 15:43:05 2013 +0000 + + sna: Don't force a migration from CPU rendering for a DRI2 flushed pixmap + + Signed-off-by: Chris Wilson + +commit 60a3b370aea0cf9ffb4947a73984c877b4695d4e +Author: Chris Wilson +Date: Wed Jan 30 15:41:51 2013 +0000 + + sna: Retire the bo after a set-domain(CPU,0) + + Having relaxed the earlier assertion because the kernel is wrong, we can + now retire for READ-READ optimisations. + + Signed-off-by: Chris Wilson + +commit 78ad5a742f40c2311bfe90997aebedeb998464e5 +Author: Chris Wilson +Date: Wed Jan 30 15:40:06 2013 +0000 + + sna: Relax assertion the the kernel considers the bo idle when we call retire + + All the callers have explicitly changed the domain upon the bo before + calling kgem_bo_retire(), so we still get the occasional sporadic + failure as kgem_busy() reports true. Kill the assertion for now. + + Signed-off-by: Chris Wilson + +commit 83bcd310d279758542e366348f808d7ca0f6d0bb +Author: Chris Wilson +Date: Wed Jan 30 13:18:21 2013 +0000 + + sna: Prefer to use snooped buffers for readbacks + + Signed-off-by: Chris Wilson + +commit 496f3ff04453524639a52a3b9dfcb8e198e5e597 +Author: Chris Wilson +Date: Wed Jan 30 12:21:33 2013 +0000 + + uxa: Harden against failures to submit batchbuffers + + If we fail to submit a batchbuffer, the driver is broken and likely to + continue to fail to render. Give up, and fallback to swrast so that the + session remains usable. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=59771 + Signed-off-by: Chris Wilson + +commit 04d48fee713e7bbc9cdf4f09855f6663a4bdc59f +Author: Chris Wilson +Date: Wed Jan 30 11:46:20 2013 +0000 + + sna: Fix errors found from asserts in a66c5f9ed51e + + Signed-off-by: Chris Wilson + +commit bc8b191ef6f5030d17a3b6497d1fd7556756c1ff +Author: Chris Wilson +Date: Wed Jan 30 09:04:10 2013 +0000 + + sna: Return early if the Drawable box exactly matches one CRTC + + If we are trying to find the best coverage, then by definition if the + drawable is an exact match for one CRTC, we can stop looking. + + Signed-off-by: Chris Wilson + +commit de28027ffc649920268ae6fdd64146f08310e8a4 +Author: Chris Wilson +Date: Wed Jan 30 08:42:48 2013 +0000 + + sna/dri: Make sure we discard the existing mappings when swapping GPU bo + + If the GPU bo is currently mapped to the Pixmap, we need to be sure to + invalidate that mapping if we swap the GPU bo (for SwapBuffers). If we + forget, we leave a dangling pointer to chase. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60042 + Signed-off-by: Chris Wilson + +commit cf9b9ac3186299ab2418c55e73e19c81e5f615a4 +Author: Chris Wilson +Date: Wed Jan 30 08:40:53 2013 +0000 + + sna: Only discard the mapping prior to the actual read when uploading + + Signed-off-by: Chris Wilson + +commit a66c5f9ed51e1dcfc2ab03339795b73617629196 +Author: Chris Wilson +Date: Wed Jan 30 08:22:00 2013 +0000 + + sna: Before replacing the devPrivate.ptr assert it is not already mapped + + Signed-off-by: Chris Wilson + +commit 3fdd28419adee7145d3925cff2704143a324e9d3 +Author: Chris Wilson +Date: Tue Jan 29 22:26:15 2013 +0000 + + sna: Only migrate the sample box if using the BLT engine for a composite + + Modify the presumption that if we are using a core operation on a shadow + pixmap, then we are likely to continue migrating that pixmap back and + forth. + + Signed-off-by: Chris Wilson + +commit 0c3b0f11d718d915e502582e9fadd5c0577640db +Author: Chris Wilson +Date: Tue Jan 29 22:24:30 2013 +0000 + + sna: Verify that we always add the SHM CPU bo to the flush list when using + + As we need to synchronize that bo before the next reply, we need to keep + track of it whenever it is active on the GPU. + + Signed-off-by: Chris Wilson + +commit f743cd5734ca502aa8bdb0e1327fe84d6ce82755 +Author: Chris Wilson +Date: Tue Jan 29 18:04:40 2013 +0000 + + sna: Avoid promoting SHM CPU bo to GPU to maintain coherence with SHM clients + + Signed-off-by: Chris Wilson + +commit 9383c5efe9ace34970abddc5e3c84c32505b537f +Author: Chris Wilson +Date: Tue Jan 29 17:24:24 2013 +0000 + + sna/gen3+: Fix a DBG for composite_boxes() + + Signed-off-by: Chris Wilson + +commit b02a1ea5573b6f0b58a037dd4788c04c296f7ff3 +Author: Chris Wilson +Date: Tue Jan 29 09:28:33 2013 +0000 + + sna: Add GT1/GT2 thread counts for Haswell + + Signed-off-by: Chris Wilson + +commit 1dc2d9ede5c7f330ebadf85d987559c8a6cb1c6b +Author: Chris Wilson +Date: Mon Jan 28 23:14:57 2013 +0000 + + sna: Add some more paranoia that we correctly map before fallbacks + + Signed-off-by: Chris Wilson + +commit 63c71bcd96202e6da44d6776d119a82f0c06d386 +Author: Chris Wilson +Date: Sun Jan 27 23:17:13 2013 +0000 + + sna: Fix typo in vertex count for threaded source span emitter + + Signed-off-by: Chris Wilson + +commit b0d26ca9312695d05c29503a3f892e7f2c5816dd +Author: Chris Wilson +Date: Sun Jan 27 21:07:03 2013 +0000 + + sna: Replace the forced vertex finish with just a wait + + When completing a batch mid-operation, we need to wait upon the other + threads to complete their writes so that memory is coherent before + submitting the work to the GPU. This was achieved by forcing the finish, + but all that from that is the wait, which makes the handling of threads + much explicit and removes the unnecessary vbo refresh. + + Signed-off-by: Chris Wilson + +commit b0c3170c1092d01b4937f352a3962854785ee549 +Author: Chris Wilson +Date: Sun Jan 27 19:09:38 2013 +0000 + + sna: Add the pixmap to the flushing list when creating for inplace CPU writes + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 73f574945f2cac14f9bafa6395e2c4dbb16fcf5d +Author: Chris Wilson +Date: Sun Jan 27 16:02:52 2013 +0000 + + sna: Disable all signals in the render threads + + X uses them (SIGIO especially) for input handling, and gets rightfully + confused if it finds itself in a different thread. + + Signed-off-by: Chris Wilson + +commit 9a7bf70365980809d0f02190f2f620a957ff1ba8 +Author: Chris Wilson +Date: Sat Jan 26 23:03:33 2013 +0000 + + sna: Enable threaded rasterisation for non-antialiased geometry + + Signed-off-by: Chris Wilson + +commit 8178cff5718e69e14d3953a7f754d7585a06838f +Author: Chris Wilson +Date: Sat Jan 26 14:41:04 2013 +0000 + + sna: Begin sketching out a threaded rasteriser for spans + + Signed-off-by: Chris Wilson + +commit 8ffb3f50b3b4601401da76e2848e059ab63231f4 +Author: Chris Wilson +Date: Fri Jan 25 10:45:39 2013 +0000 + + sna: Spawn threads to rasterize trapezoids through pixman + + Signed-off-by: Chris Wilson + +commit 0ec2f3a8bac96acc55c8fdb432b97d026abaafb4 +Author: Chris Wilson +Date: Thu Jan 24 23:10:39 2013 +0000 + + sna: Spawn threads to composite trapezoids inplace + + Signed-off-by: Chris Wilson + +commit 427b7311fe1b66d54518bae45e9fa149bda8a6e8 +Author: Chris Wilson +Date: Thu Jan 24 22:25:46 2013 +0000 + + sna: Perform the last threaded composite operation directly + + The point of the refactor was to execute the last stage of the composite + in the master thread, so do so. + + Signed-off-by: Chris Wilson + +commit 326dcd75f2202b1af29e986f5efb6b1e133217cb +Author: Chris Wilson +Date: Thu Jan 24 20:58:53 2013 +0000 + + sna: Parse cpuinfo to determine the actual number of physical cores/caches + + Signed-off-by: Chris Wilson + +commit f597b647180c1e7bf83693060f244926191b7462 +Author: Chris Wilson +Date: Thu Jan 24 18:45:35 2013 +0000 + + sna: Tidy construction of data for threaded composite + + Signed-off-by: Chris Wilson + +commit 1643c97f8f7b49738b649b5f7d1e574d689d167e +Author: Chris Wilson +Date: Thu Jan 24 18:24:02 2013 +0000 + + sna: Use threads for simple mask generation + + Signed-off-by: Chris Wilson + +commit d60128c55e8f5f69476d42c20f2fd62ccc0f411e +Author: Chris Wilson +Date: Thu Jan 24 15:41:29 2013 +0000 + + sna/dri: Compensate clipExtents for drawable offset + + The clipExtents is in screen coordinates whereas we just want to confirm + that the maximum pixel to be copied lies with the DRI2 buffer, which is + relative to the drawable. + + Reported-by: Matthieu Baerts + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59806 + Signed-off-by: Chris Wilson + +commit 264b3b72500c5af74d124a214347d45c9cb90a1d +Author: Chris Wilson +Date: Thu Jan 24 15:06:12 2013 +0000 + + sna: Refactor to use a common fbComposite fallback + + Signed-off-by: Chris Wilson + +commit 8ecfbea9d1f83b2de62bee0f58299e7a90c741d1 +Author: Chris Wilson +Date: Thu Jan 24 14:46:03 2013 +0000 + + sna: Experiment with a threaded renderer for fallback compositing + + Signed-off-by: Chris Wilson + +commit 778dba90cfc4e801a975bd661c56a565ce60524b +Author: Chris Wilson +Date: Wed Jan 23 21:32:29 2013 +0000 + + sna/dri: Don't contribute missed frames to the target_msc + + Signed-off-by: Chris Wilson + +commit 50b41cb485ffb38e6bf705a3a62840bb78af669b +Author: Chris Wilson +Date: Wed Jan 23 21:16:49 2013 +0000 + + sna/dri: Only reject DRI2 buffers that are too small for the request blit + + The goal is to reject stale DRI2 buffers that are smaller than the + target due to not-yet-handled ConfigureNotify, but not to reject + blitting from Windows that are larger than the frontbuffer. + + Fixes a regression from the overzealous + commit b27ecf3059bc066ef59f2a71c1d8d8f0ffec7191 + Author: Chris Wilson + Date: Mon Nov 12 14:06:06 2012 +0000 + + sna/dri: Prevent scheduling a swap on stale buffers + + Signed-off-by: Chris Wilson + +commit 98b312e579385e6e4adf6bf0abe20f8ca84592af +Author: Chris Wilson +Date: Wed Jan 23 20:51:35 2013 +0000 + + sna/dri: Stop feeding I915_TILING_Y to mesa i915c + + Only i915g handles Y-tiling, and we can't differentiate between the two + types of clients. + + Signed-off-by: Chris Wilson + +commit 31796400915a06fc789088b7dcfcecd6ea91e195 +Author: Chris Wilson +Date: Wed Jan 23 19:37:23 2013 +0000 + + sna: Clean up WAIT_FOR_EVENT on gen2/3 + + Signed-off-by: Chris Wilson + +commit ea8148b24d48db4f46205817db8a55dd6ea1a4b3 +Author: Chris Wilson +Date: Wed Jan 23 17:47:12 2013 +0000 + + sna/dri: Prefer to use the BLT ring for vsync'ed copies on IVB+ + + Signed-off-by: Chris Wilson + +commit 3c3a87a2d4261cbd66602812637328a04787f510 +Author: Chris Wilson +Date: Wed Jan 23 17:35:50 2013 +0000 + + sna/gen6: Correct the event definition for secondary pipes for MI_WAIT_FOR_EVENT + + It helps to wait upon the event we program and enable. + + References: https://bugzilla.kernel.org/show_bug.cgi + Signed-off-by: Chris Wilson + +commit 88753c5a8c6c9acf086d81828260adf330eebb1a +Author: Chris Wilson +Date: Wed Jan 23 17:35:50 2013 +0000 + + sna/gen7: Correct the event definition for secondary pipes for MI_WAIT_FOR_EVENT + + It helps to wait upon the event we program and enable. + + References: https://bugzilla.kernel.org/show_bug.cgi + Signed-off-by: Chris Wilson + +commit 2d92d8ec562cb1e6b9dca28074adca670734233c +Author: Chris Wilson +Date: Tue Jan 22 09:24:04 2013 +0000 + + sna: Extend rectangular PolyLines to cover corner pixels on ccw paths + + Reported-by: Joe Peterson + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55484 + Signed-off-by: Chris Wilson + +commit c8817e24a9d97110a961c3803290e38ff5cbfc9a +Author: Chris Wilson +Date: Tue Jan 22 09:06:50 2013 +0000 + + sna/gen7: Fix inversion of bool return code from CA pass + + As we inverted the predicate, we no longer restored the original + operation after performing a CA pass - glyph would randomly become + white. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 10f549332e315cfe2cc86aadab94a95ae6757c34 +Author: Chris Wilson +Date: Mon Jan 21 16:48:34 2013 +0000 + + sna: Free a non-reusable bo if it expires on the flushing list + + Still no sure just how the bo ends up there, but as there seems to be + the occasional malinger, just free it. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit d7f0df27edb20b052ad39beb26a0b1924f432618 +Author: Chris Wilson +Date: Mon Jan 21 16:34:09 2013 +0000 + + sna: Use the maximum backlight value if we fail to read the current value + + Signed-off-by: Chris Wilson + +commit 46a3a68e60a1d0a598ec8ece81088a4e6491de55 +Author: Chris Wilson +Date: Mon Jan 21 16:29:30 2013 +0000 + + sna: Assert that if marked as a scanout it is indeed bound. + + On further review, the invariant must have been violated earlier, so + make the assert earlier. + + Signed-off-by: Chris Wilson + +commit 0507d55dd1bc8fedae524a410a9e7b53f1dad920 +Author: Chris Wilson +Date: Mon Jan 21 16:24:49 2013 +0000 + + sna: Only add bound scanouts to the scanout list + + If we never used the bo as an actual scanout it will never have had been + moved to the uncached domain and so we can return it back to the system + cache. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 5a0bc67ba57cf698e100df617474669ed5d036d6 +Author: Chris Wilson +Date: Mon Jan 21 11:41:38 2013 +0000 + + sna: New execbuffer flags for lut-handle and fast-relocs are upstream + + Now the flags are upstream, we can rely on runtime tests as the + interface is now frozen. + + Signed-off-by: Chris Wilson + +commit 208ca91a31182e8ddad36e6a735c725362cbd071 +Author: Chris Wilson +Date: Sun Jan 20 18:02:41 2013 +0000 + + sna/gen7: Place the vsync commands in the same cacheline + + Do as told; both the LRI and WAIT_FOR_EVENT need to be in the same + cacheline for an unspecified reason. + + Signed-off-by: Chris Wilson + +commit 9a3e3abfe9b624af2354c5a69778aee3024fe46c +Author: Chris Wilson +Date: Sun Jan 20 17:48:31 2013 +0000 + + sna/gen7: Offset start/end scanlines by one + + The hardware needs to be programmed with the line before the desired + scanline, wrapping around as required. + + Signed-off-by: Chris Wilson + +commit e6a64f872bfd026aa1ba1bd44b1298918c819849 +Author: Chris Wilson +Date: Sun Jan 20 16:59:58 2013 +0000 + + sna/gen3+: Remove bogus assertion that the vbo in included before finish + + If we are carrying over a nearly full vbo from one batch to the next, we + may indeed finish it prior to writing any new primitives and so the + assert is truly bogus. + + Signed-off-by: Chris Wilson + +commit 5de919336fc1ba1c4116e18ba0560cdb7b0589f0 +Author: Chris Wilson +Date: Sun Jan 20 16:36:17 2013 +0000 + + sna/gen6: Tweak programming scanline values + + The documentation says that both start/end scanline need to be the line + before the desired value, and so to program the first scanline we need + to set it to the last scanline. The docs also say that the lower 3 bits + are ignored, so tweaked the values programmed accordingly with an extra + check that the window is not reduced to 0. + + Signed-off-by: Chris Wilson + +commit 2f9ac4e8a17e9d60bbb55c46929c37e92181d804 +Author: Chris Wilson +Date: Sun Jan 20 15:53:32 2013 +0000 + + sna/gen3+: And restore non-CA compositing state after the CA pass + + Signed-off-by: Chris Wilson + +commit 650c9d5ce80afc1d4c8d9f77f6679f085fa4dc9d +Author: Chris Wilson +Date: Sun Jan 20 14:58:42 2013 +0000 + + sna/gen3+: Reset vertex relocation state after discarding the batch + + Fixes a regression from commit a6ecb6d31d8c543f38fca0be6b0ec82e59dcd8d2 + Author: Chris Wilson + Date: Wed Jan 16 09:14:40 2013 +0000 + + sna: Discard the batch if we are discarding the only buffer in it + + as we may keep a stale relocation for the vertex buffer alive if we + attempt to clear the bo using the render engine before discarding it. + + Signed-off-by: Chris Wilson + +commit 492952e0d6362a046a666956afdf8f9bc0f2b7e7 +Author: Chris Wilson +Date: Sun Jan 20 14:55:06 2013 +0000 + + sna/gen3+: Handle flushing vbo for CA glyphs + + Signed-off-by: Chris Wilson + +commit b52c921204df6b2486717fcef05b4a1993aa1071 +Author: Chris Wilson +Date: Sun Jan 20 14:02:07 2013 +0000 + + sna: Adapt error detection and handling for invalid batchbuffers + + Allow the DDX to continue even if the kernel rejects our batchbuffers by + disabling hw acceleration - just extends the existing hang detection to + also handle the driver producing garbage. + + Signed-off-by: Chris Wilson + +commit 8215a278f20d34819536edbda05a108a860fefb9 +Author: Chris Wilson +Date: Sun Jan 20 12:36:07 2013 +0000 + + sna/gen3: Always close the vertices for a batch, even if the vbo is empty + + In the case where we emit a no-op, we may not attempt to finish binding + the vbo as it is considered empty. This leaves a stray relocation for + the next batch, and also causes it to believe that it has a vbo bound + already. + + Signed-off-by: Chris Wilson + +commit a88a9b9a59fa2d5fd427fa6e1f74fb9844379264 +Author: Chris Wilson +Date: Sun Jan 20 12:06:09 2013 +0000 + + 2.20.19 release + +commit 7822bbacbece6fcb2e12863cd6c7a53ab614c37c +Author: Chris Wilson +Date: Sun Jan 20 11:43:49 2013 +0000 + + test: Add script to generate source file for testing vsync + + Courtesy of an original script by Mark Schreiber, + https://bugs.freedesktop.org/show_bug.cgi?id=59606 + +commit 9329d8755981989ccbe66df6085fbab7c809a2c6 +Author: Chris Wilson +Date: Sun Jan 20 10:14:21 2013 +0000 + + sna: Make DEBUG_SYNC a configure option + + As it is advisable to combined the synchronous rendering debug option + with other debugging options, it is more convenient to make it into a + configure option: --enable-debug=sync + + Signed-off-by: Chris Wilson + +commit c9263f192e2f85dd961bc1c4e9ca8180db874517 +Author: Chris Wilson +Date: Sun Jan 20 01:39:12 2013 +0000 + + sna: Apply DEBUG_SYNC prior to emitting error report + + This is handy for the case where the batch triggers a GPU hang rather + than being rejected by the kernel. + + Signed-off-by: Chris Wilson + +commit 42ab789cce8423d99864776c6d5ba759c4129b54 +Author: Chris Wilson +Date: Fri Jan 18 13:56:53 2013 +0000 + + sna: Clear the non-intersecting damage after skipping the slave update + + Signed-off-by: Chris Wilson + +commit 828a3a80aa3f0692e7be2831d58bccf02e2c481d +Author: Chris Wilson +Date: Fri Jan 18 13:16:23 2013 +0000 + + uxa: Clip dirty region to slave pixmap before appending damage + + Fixes regression from + + commit c789d06cf8a0debc67058d7be1483f5b542e2baa + Author: Dave Airlie + Date: Mon Jan 7 13:57:21 2013 +1000 + + intel: fixup damage posting to be done correctly around slave pixmap + + which causes the entire slave scanout to be readback from uncached + memory every time a pixel is modified. + + Reported-by: Stephen Liang + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59539 + Signed-off-by: Chris Wilson + +commit e17eaf540b614cdcb8f7349dd01852c3afc5ab05 +Author: Chris Wilson +Date: Fri Jan 18 13:09:36 2013 +0000 + + sna: Replace double negative '!RegionNotEmpty' with the equivalent RegionNil + + Signed-off-by: Chris Wilson + +commit 2de43a0164ba5364ffd7cb48f0bccc9873e87332 +Author: Chris Wilson +Date: Fri Jan 18 12:01:54 2013 +0000 + + sna: Skip an empty slave update + + Signed-off-by: Chris Wilson + +commit 38de17f80d780bf219fc3c4018ad9cc8808ba50f +Author: Chris Wilson +Date: Fri Jan 18 10:16:42 2013 +0000 + + sna: Remove bogus assertion invalidated by 'read-read' sync + + If we perform a read-read synchronisation, the kernel may still believe + that the bo is busy as it remains on the active lists being read by the + GPU. + + Signed-off-by: Chris Wilson + +commit 9f68ac60ae37cc72503ec40691d1ae43a476f8e7 +Author: Chris Wilson +Date: Thu Jan 17 20:00:34 2013 +0000 + + sna/dri: Explicitly flag sync copies for the backends + + As gen6/7 need to prevent ring switching and perform a rendercopy if we + need to perform a vsync'ed copy. + + Signed-off-by: Chris Wilson + +commit 1ee00c408d8142cfaf4202393c2364c9ae73cb6e +Author: Chris Wilson +Date: Thu Jan 17 13:09:47 2013 +0000 + + sna/trapezoids: Fix horizontal offset for inplace operation + + Remember that for an inplace operation we are not dealing with an a8 + mask, but rather a x8r8g8b8 surface and so need to step accordingly. + + Signed-off-by: Chris Wilson + +commit 0d749f93ea52161e59da1adca1a22e96ba293551 +Author: Chris Wilson +Date: Thu Jan 17 12:28:18 2013 +0000 + + sna: Drop the MOVE_WHOLE_HINT for PutImage + + It is not as clearly beneficial as for GetImage, as for example toolkits + may only push the shadows around a window. + + Signed-off-by: Chris Wilson + +commit dc643ef753bcfb69685f1eb10828d0c8f830c30e +Author: Chris Wilson +Date: Thu Jan 17 12:27:55 2013 +0000 + + sna: Apply read-only synchronization hints for move-to-cpu + + Signed-off-by: Chris Wilson + +commit 18035a21e147788bea03ab2175ca03ae951701ce +Author: Chris Wilson +Date: Thu Jan 17 11:52:10 2013 +0000 + + sna: Remove the confusion of the pixmap->undamaged + + This was to track a pixmap that had been used for migration (i.e had in + the past been used for mixed rendering). It is no longer used so remove + it. + + Signed-off-by: Chris Wilson + +commit 46141d277f326ae78f7b0e927a500e0eb1987f1b +Author: Chris Wilson +Date: Thu Jan 17 10:16:24 2013 +0000 + + sna: Consider fill style for XPolyRectangle + + The rectangle outline is not always solid... + + Signed-off-by: Chris Wilson + +commit d5c8d38afaba04281157bafe212e93f010ae00f5 +Author: Chris Wilson +Date: Thu Jan 17 10:10:54 2013 +0000 + + sna: Refactor to remove a goto from sna_put_zpixmap_blt() + + The complexity of the function has been moved to move-to-cpu so we can + take further advantage of the simplified logic in put_zpixmap to clean + up the code by removing an unwanted goto. + + Signed-off-by: Chris Wilson + +commit 9552438caa4d295c99a9b8821cf2644739861c6a +Author: Colin Walters +Date: Wed Jan 4 17:37:06 2012 -0500 + + autogen.sh: Implement GNOME Build API + + http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Adam Jackson + +commit 87d773249af18ae8722aacb7306b0eee51a90dbc +Author: Adam Jackson +Date: Wed Jan 16 13:18:23 2013 -0500 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Adam Jackson + +commit dbf1cfec9cd4e9efe7650f2940c92b4e51214288 +Author: Chris Wilson +Date: Wed Jan 16 12:20:48 2013 +0000 + + 2.20.18 release + + Signed-off-by: Chris Wilson + +commit 47caffc50b5cdd288ad868fa9a697f0d4e2d28dc +Author: Chris Wilson +Date: Wed Jan 16 10:49:24 2013 +0000 + + sna: Restrict upload buffers to reduce sampler TLB misses + + Signed-off-by: Chris Wilson + +commit ab36300a22222086b94857f356612106ffbeb480 +Author: Chris Wilson +Date: Wed Jan 16 09:17:59 2013 +0000 + + sna: Correct DBG to refer to the actual tiling mode forced + + Signed-off-by: Chris Wilson + +commit a6ecb6d31d8c543f38fca0be6b0ec82e59dcd8d2 +Author: Chris Wilson +Date: Wed Jan 16 09:14:40 2013 +0000 + + sna: Discard the batch if we are discarding the only buffer in it + + Signed-off-by: Chris Wilson + +commit 26db2438e34feb8f28444bf7418869b4ecd870da +Author: Chris Wilson +Date: Wed Jan 16 09:00:21 2013 +0000 + + sna: Fix computation of large object sizes to prevent overflow + + Signed-off-by: Chris Wilson + +commit 54c1d97d5ab325874e1c7b2639e58111d7a6b93f +Author: Chris Wilson +Date: Wed Jan 16 09:00:04 2013 +0000 + + sna: Add DBG for when we add the inplace hint + + Signed-off-by: Chris Wilson + +commit 588c5aa6bca441d7c9305fe2fcf268e89b6b617d +Author: Chris Wilson +Date: Tue Jan 15 22:21:56 2013 +0000 + + sna: Revert use of a separate CAN_CREATE_SMALL flag + + Signed-off-by: Chris Wilson + +commit af85ffdec7047efa452d6bab3a0ee3889dd4f046 +Author: Chris Wilson +Date: Tue Jan 15 20:37:11 2013 +0000 + + sna: Avoid serialising on an move-to-cpu for an async operation + + Signed-off-by: Chris Wilson + +commit d70be85dc723168a481c1955444afd951c4817bf +Author: Chris Wilson +Date: Tue Jan 15 20:16:45 2013 +0000 + + sna: Assert that we never try to mix INPLACE / ASYNC hints for move-to-cpu + + Signed-off-by: Chris Wilson + +commit 1287c3a24c277cb42930d8af2943b9f7b016f31d +Author: Chris Wilson +Date: Tue Jan 15 18:59:15 2013 +0000 + + sna: Specialise sna_get_image_blt for clears to avoid sync readback + + Signed-off-by: Chris Wilson + +commit da4972eec57e662b98a7abced6338ceb8a533a48 +Author: Chris Wilson +Date: Tue Jan 15 18:34:07 2013 +0000 + + sna/trapezoids: Avoid the multiply for an opaque source + + Signed-off-by: Chris Wilson + +commit 7f968c8c991cff751459939bdb42e14255f529b7 +Author: Chris Wilson +Date: Tue Jan 15 18:41:00 2013 +0000 + + sna: Add DBG to use_shm_bo() + + Signed-off-by: Chris Wilson + +commit af63fab5047a43716c5df875ddc50f7c877f8a83 +Author: Chris Wilson +Date: Tue Jan 15 18:21:11 2013 +0000 + + sna: Hint that a copy from a SHM bo will likely be the last in a batch + + Signed-off-by: Chris Wilson + +commit 1be436409222c00ff66c6d747487b77f1037b27a +Author: Chris Wilson +Date: Tue Jan 15 18:20:29 2013 +0000 + + sna: Pass the async hint for the upload into the GPU + + Signed-off-by: Chris Wilson + +commit 2113f7f440dd2f10e80f0bb3bd5cd155f7e19098 +Author: Chris Wilson +Date: Tue Jan 15 09:33:03 2013 +0000 + + sna: Free the SHM pixmaps after b266ae6f6f + + Since b266ae6f6f protected the static allocations from being reaped in + the normal course of events, we need to penetrate those defenses in + order to finally free the SHM mappings. + + Signed-off-by: Chris Wilson + +commit 441c481630a5cf09a7eb26d5db80b1e60cb2b10f +Author: Chris Wilson +Date: Tue Jan 15 01:26:19 2013 +0000 + + sna: Mark uploads with async hints when appropriate + + Signed-off-by: Chris Wilson + +commit 6abd442279fd32d1ce9b33a72eabbeb922316151 +Author: Chris Wilson +Date: Tue Jan 15 00:15:23 2013 +0000 + + sna: Avoid allocating an active CPU bo unnecessarily + + If we will not write back the GPU damage to the bo as we intend to + overwrite it for the next operation, we can forgo allocating the active + CPU bo and skip the synchronisation overhead. + + Signed-off-by: Chris Wilson + +commit f235c74cd661970c76e152777e9a2c314a368a56 +Author: Chris Wilson +Date: Mon Jan 14 15:49:42 2013 +0000 + + sna: Tweak considering of last-cpu placement for inplace regions + + Signed-off-by: Chris Wilson + +commit 70c5e41b519e44e620948d683d3b1111494d2f48 +Author: Chris Wilson +Date: Mon Jan 14 15:03:59 2013 +0000 + + sna: Limit temporary userptr uploads to large busy targets or LLC machines + + Signed-off-by: Chris Wilson + +commit cf860da1c78244036c59edf934b312cc1367e8aa +Author: Chris Wilson +Date: Mon Jan 14 12:50:54 2013 +0000 + + sna: Apply PutImage optimisations to move-to-cpu + + We can replace the custom heuristics for PutImage by applying them to + the common path, where hopefully they are equally valid. + + Signed-off-by: Chris Wilson + +commit e4ad4477815abe31b1a2323673da86a6def2f246 +Author: Chris Wilson +Date: Mon Jan 14 13:12:46 2013 +0000 + + sna: Use userptr to accelerate GetImage + + Signed-off-by: Chris Wilson + +commit 3cc04a8e24f02248b6382c9bc354ea15c42b17b6 +Author: Chris Wilson +Date: Sun Jan 13 17:34:03 2013 +0000 + + sna: Initialize src_bo to detect allocation failure + + sna_accel.c: In function 'sna_put_image': + sna_accel.c:3730:18: warning: 'src_bo' may be used uninitialized in this + function [-Wmaybe-uninitialized] + + Signed-off-by: Chris Wilson + +commit 3f04b0b98d7f861ff58b82c99d33b7eacfcda5f7 +Author: Chris Wilson +Date: Sun Jan 13 17:31:15 2013 +0000 + + sna: Check size against aperture before attempting to perform the GTT mapping + + Signed-off-by: Chris Wilson + +commit 7a7db06c62228acc6d1c03e800c7afa84e886f5a +Author: Chris Wilson +Date: Sun Jan 13 13:45:18 2013 +0000 + + sna: Add a compile flag for measuring impact of userptr uploads + + Signed-off-by: Chris Wilson + +commit bcc212dc7a939505a678f97f6700eee99204249f +Author: Chris Wilson +Date: Sun Jan 13 13:36:09 2013 +0000 + + sna: Use the pixmap size (not drawable) to determine replacement + + Signed-off-by: Chris Wilson + +commit 32f43f618d9b11ea44b3e01a95ac3f239a731ad2 +Author: Chris Wilson +Date: Sun Jan 13 13:23:24 2013 +0000 + + sna: Allow large image uploads to utilize temporary mappings + + Signed-off-by: Chris Wilson + +commit bf2b2e2f91208412c8b74a95859def501514be43 +Author: Chris Wilson +Date: Sun Jan 13 12:24:44 2013 +0000 + + sna: Allow creation of a CPU map for pixmaps if needed + + Signed-off-by: Chris Wilson + +commit b266ae6f6f8fb4c494ece532ae4621055e66beb2 +Author: Chris Wilson +Date: Sun Jan 13 11:30:07 2013 +0000 + + sna: Relax limitation on not mapping GPU bo with shadow pointers + + Signed-off-by: Chris Wilson + +commit a2d82161436e489f23637d793c737bc6950a62b8 +Author: Chris Wilson +Date: Sun Jan 13 10:17:33 2013 +0000 + + sna: Correct a few assertions after enabling read-only mappings + + As these do not flush the active state if we have read-read mappings, we + need to be careful with our asserts concerning the busy flag. + + Signed-off-by: Chris Wilson + +commit ab01fd696e1137ddfb9a85ae68c15c05900f0e8e +Author: Chris Wilson +Date: Sat Jan 12 09:17:03 2013 +0000 + + sna: Experiment with a CPU mapping for certain fallbacks + + Signed-off-by: Chris Wilson + +commit 03d392cd1d87e17129c42e4d822d3d1749edb02e +Author: Chris Wilson +Date: Sat Jan 12 08:51:52 2013 +0000 + + sna: Tweak max object sizes to take account of aperture restrictions + + Signed-off-by: Chris Wilson + +commit d111c464bfbae57bb7141872810c88b88f30c087 +Author: Chris Wilson +Date: Sat Jan 12 08:15:13 2013 +0000 + + sna: After a size check, double check the batch before flushing + + As we may fail the size check with an empty batch and a pair of large + bo, we need to check before submitting that batch in order to not run + afoul of our internal sanity checks. + + Signed-off-by: Chris Wilson + +commit ec77a07b41f1062b941774f3782b51d21e7824dd +Author: Chris Wilson +Date: Fri Jan 11 11:40:57 2013 +0000 + + sna/dri: Prefer to preserve the ring of the destination bo + + Signed-off-by: Chris Wilson + +commit 42f1026e11527cb62b4522b44e71a4e72582a876 +Author: Chris Wilson +Date: Fri Jan 11 11:40:16 2013 +0000 + + sna: Reorder struct kgem_bo to move related data into the same cacheline + + Signed-off-by: Chris Wilson + +commit aead71051ed757e7565d395c858bf8ab8f0b0ff6 +Author: Chris Wilson +Date: Fri Jan 11 01:30:43 2013 +0000 + + sna: Disable memcpy_to_tiled_x() uploads on 32-bit systems + + It's far too slow due to the register starved instruction set producing + attrocious code and the extra overhead in the kernel for managing memory + mappings. + + Signed-off-by: Chris Wilson + +commit 220970b1a484e283e2bbb44f79df613ce1ee1146 +Author: Chris Wilson +Date: Thu Jan 10 19:43:05 2013 +0000 + + sna: Also prefer to use the GPU for uploads into a tiled bo + + Signed-off-by: Chris Wilson + +commit 672e59851c427c63f43cde7dfd1688a72100e3b3 +Author: Chris Wilson +Date: Thu Jan 10 19:35:29 2013 +0000 + + sna: Prefer userptr if copying to a tiled bo + + Signed-off-by: Chris Wilson + +commit 441ef916ae6569c88b3d6abaf7fea4d69be49d76 +Author: Chris Wilson +Date: Thu Jan 10 19:14:21 2013 +0000 + + intel: Throttle harder + + Filling the rings is a very unpleasant user experience, so cap the + number of batches we allow to be inflight at any one time. + + Interestingly, as also found with SNA, throttling can improve + performance by reducing RSS. However, typically throughput is improved + (at the expense of latency) by oversubscribing work to the GPU and a + 10-20% slowdown is commonplace for cairo-traces. Notably, x11perf is + less affected and in particular application level benchmarks show no + change. + + Note that this exposes another bug in libdrm-intel 2.4.40 on gen2/3. + + Signed-off-by: Chris Wilson + +commit a37d56f338c5fae832d5eeea1283b6dbde827678 +Author: Chris Wilson +Date: Thu Jan 10 16:28:24 2013 +0000 + + sna: Use some surplus bits to back our temporary pixman_image_t + + Signed-off-by: Chris Wilson + +commit 09ea1f4402b3bd0e411b90eb5575b3ff066d7356 +Author: Chris Wilson +Date: Thu Jan 10 16:26:24 2013 +0000 + + sna: Prefer to use the GPU for copies from SHM onto tiled destinations + + Signed-off-by: Chris Wilson + +commit c63147a3c33fd26f5c04a8648881659b4a90df06 +Author: Chris Wilson +Date: Thu Jan 10 15:15:15 2013 +0000 + + sna: Allow CPU bo to copy to GPU bo if the device is idle. + + Signed-off-by: Chris Wilson + +commit 2933e7595838c28081810d4959ca1e005a0419e1 +Author: Chris Wilson +Date: Thu Jan 10 13:07:19 2013 +0000 + + sna: Ignore the last pixmap cpu setting if overwritting all damage + + Signed-off-by: Chris Wilson + +commit 934ea64f7ff080b00d00c50ba94f63247d7bb130 +Author: Chris Wilson +Date: Thu Jan 10 13:06:06 2013 +0000 + + sna: With a GPU bo and a shm source, do not fall all the way back + + The normal source upload into GPU bo knows a few more tricks that we may + want to apply first before copying into the shadow of the GPU bo. + + Signed-off-by: Chris Wilson + +commit 8a8edfe4076ee08558c76eddbb68426e4563888c +Author: Chris Wilson +Date: Thu Jan 10 03:31:37 2013 +0000 + + sna: Make sure all outputs are disabled if no CompatOutput is defined + + If we have to fallback and the configuration is wonky, make sure that + all known outputs are disabled as we takeover the console. + + Signed-off-by: Chris Wilson + +commit 5449e16c0c2b6ca5af4acf42703164b9d2b2d822 +Author: Chris Wilson +Date: Thu Jan 10 02:54:41 2013 +0000 + + sna: Open-code xf86CompatOutput() to avoid invalid pointers + + config->compat_output needs to be sanitized during device initialization + or we may dereference an invalid xf86OutputPtr. + + Signed-off-by: Chris Wilson + +commit 8881a14200580db731ca6902b289b08989aaa61e +Author: Mickaël THOMAS +Date: Mon Jan 7 20:47:51 2013 +0100 + + Set initial value for backlight_active_level + + If the "Backlight" option is set, backlight_active_level is not set which + results in a default value of 0, causing a black screen upon starting Xorg. + +commit b8c9598294eaa16e0d1578ad98896f6ec5ba37cf +Author: Chris Wilson +Date: Mon Jan 7 13:57:21 2013 +1000 + + sna: fixup damage posting to be done correctly around slave pixmap + + Copied from commit c789d06cf8a0debc67058d7be1483f5b542e2baa + Author: Dave Airlie + Date: Mon Jan 7 13:57:21 2013 +1000 + + This fixes the damage posting to happen in the correct ordering, + not sure if this fixes anything, but it should make things more consistent. + +commit c789d06cf8a0debc67058d7be1483f5b542e2baa +Author: Dave Airlie +Date: Mon Jan 7 13:57:21 2013 +1000 + + intel: fixup damage posting to be done correctly around slave pixmap + + This fixes the damage posting to happen in the correct ordering, + not sure if this fixes anything, but it should make things more consistent. + + Signed-off-by: Dave Airlie + +commit 5891c89ff2be277d1a833d4bc092b65184c1f3d6 +Author: Dave Airlie +Date: Mon Jan 7 13:54:47 2013 +1000 + + intel: drop pointless error printf in the slave pixmap sync code. + + This is left over and spams logs, get rid. + + Signed-off-by: Dave Airlie + +commit 27550e81482229007fa9e0e9769fdd20f3616b23 +Author: Chris Wilson +Date: Sun Jan 6 17:29:19 2013 +0000 + + sna/dri: Transfer the DRI2 reference to the new TearFree pixmap + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58814 + Signed-off-by: Chris Wilson + +commit 1a5e4fb725da2eb25cf7f476290c02e9880a4efc +Author: Chris Wilson +Date: Sun Jan 6 17:08:56 2013 +0000 + + sna: Only disable upon a failed pageflip after at least one pipe flips + + If we have yet to update a pipe for a pageflip, then the state remains + consistent and we can fallback to a blit without disabling any pipes. If + we fail after flipping a pipe, then unless we disable an output the + state becomes inconsistent (the pipes disagree on what the attached fb + is). + + Signed-off-by: Chris Wilson + +commit dd66ba8e5666a1ce7da0ddc226d074f591e1fa22 +Author: Chris Wilson +Date: Sun Jan 6 16:13:56 2013 +0000 + + sna: Try to create userptr with the unsync'ed flag set first + + Signed-off-by: Chris Wilson + +commit 9051f43fa3c8d011921ac6ff75b763280f26d98f +Author: Chris Wilson +Date: Sun Jan 6 15:20:14 2013 +0000 + + sna/gen4+: Handle solids passed to the general texcoord emitter + + The general texcoord emitter does handle solids (for the case of a + transformed mask) and so we need to be careful to setup the + VERTEX_ELEMENTS accordingly. + + Fixes regression from + commit 2559cfcc4cbc1d0d84b048565cad3bfee61df8da + Author: Chris Wilson + Date: Wed Jan 2 10:22:14 2013 +0000 + + sna/gen4+: Specialise linear vertex emissio + + Signed-off-by: Chris Wilson + +commit 4af910e8be92e0ca241ce1e93e322c712dcbe340 +Author: Chris Wilson +Date: Sun Jan 6 13:43:55 2013 +0000 + + sna/gen4+: Trim the redundant float from the fill vertices + + Signed-off-by: Chris Wilson + +commit 3244e4b23397f54ca76876dd76ebea9a0abd357e +Author: Chris Wilson +Date: Sun Jan 6 13:24:23 2013 +0000 + + Revert "sna/gen4+: Backport tight vertex packing for simple renderblits" + + This reverts commit 8ff76fad1fadc5e309f9a12c30f883460a432049 and + commit 48e4dc4bd4b2980f0f804f572d0e3fc1bb4bc21e. + + I forgot gen4 and gen5 do not have the 'non-normalized' bit in their + sampler states. + +commit d3be77f87916e38af717bafaf2000becd5180d76 +Author: Chris Wilson +Date: Sat Jan 5 18:07:50 2013 +0000 + + sna/trapezoids: filter out cancelling edges upon insertion to edge-list + + Signed-off-by: Chris Wilson + +commit 2b4a2f52c47a24c297312d51f9a8299c9a54a697 +Author: Chris Wilson +Date: Sat Jan 5 17:21:34 2013 +0000 + + sna/trapezoids: filter out zero-length runs + + Signed-off-by: Chris Wilson + +commit 59a7b8b32c694735942fd7e42c1382d91004b0b1 +Author: Chris Wilson +Date: Fri Jan 4 18:22:14 2013 +0000 + + sna: Clear up the caches after handling a request allocation failure + + Signed-off-by: Chris Wilson + +commit 3c31a9fc210221ba8e7922bec80c15ec39cab7bc +Author: Chris Wilson +Date: Fri Jan 4 18:11:12 2013 +0000 + + sna: Embed the pre-allocation of the static request into the device + + So that in the cache where we are driving multiple independent screens + each having their own device, we do not share the global reserved + request in the event of an allocation failure. + + Signed-off-by: Chris Wilson + +commit b5b3cfb0ad1cc5e66c99035f526946bf41011e13 +Author: Chris Wilson +Date: Thu Jan 3 23:33:44 2013 +0000 + + sna: Flush the batch prior to referencing work from another ring + + In the case where the kernel is inserting semaphores to serialise work + between rings, we want to only delay the surface that is coming from the + other ring and not interfere with work already queued. + + Signed-off-by: Chris Wilson + +commit ea2da97773d858001f98adc880f24b9671c51b2f +Author: Chris Wilson +Date: Thu Jan 3 16:47:14 2013 +0000 + + sna: Convert allocation request from bytes to num_pages when shrinking + + Signed-off-by: Chris Wilson + +commit 2bd6e4dcd43bb0d836f12232050e73ce1510bb0f +Author: Chris Wilson +Date: Thu Jan 3 16:38:33 2013 +0000 + + sna: Add a pair of asserts to validate fls()/cache_bucket() + + Signed-off-by: Chris Wilson + +commit f9d2730974a869f15eac599ca865b50a9a9658d9 +Author: Chris Wilson +Date: Thu Jan 3 15:20:45 2013 +0000 + + sna: Also recognise __i386__ for fls asm + + Signed-off-by: Chris Wilson + +commit 69dde74a003ba0168ceca1558a4cb69097421b92 +Author: Chris Wilson +Date: Thu Jan 3 15:20:23 2013 +0000 + + sna: Fix off-by-one in C version of fls + + Signed-off-by: Chris Wilson + +commit fc702cdf534a4694a64408428e8933497a7fc06e +Author: Matt Turner +Date: Wed Jan 2 16:07:54 2013 +0000 + + sna: Rewrite __fls without dependence upon x86 assembly + + The asm() prevents SNA from compiling on ia64. + + Fixes https://bugs.gentoo.org/show_bug.cgi?id=448570 + +commit bc67bdcec832f4302951f2789456666dee2f496c +Author: Chris Wilson +Date: Wed Jan 2 13:47:51 2013 +0000 + + sna/gen6+: Fine tune placement of DRI copies + + Avoid offsetting the overhead of the render copy only to be penalised by + the overhead of the semaphore. So compromise. + + Signed-off-by: Chris Wilson + +commit 2559cfcc4cbc1d0d84b048565cad3bfee61df8da +Author: Chris Wilson +Date: Wed Jan 2 10:22:14 2013 +0000 + + sna/gen4+: Specialise linear vertex emission + + Signed-off-by: Chris Wilson + +commit 0996ed85fd8bd79f41f28908733b85566f9e2b69 +Author: Chris Wilson +Date: Tue Jan 1 22:53:26 2013 +0000 + + sna/gen2+: Precompute the affine transformation scale factors + + Signed-off-by: Chris Wilson + +commit d36cae801f1dcb06d4f93f2f27cc9b9de73e89c9 +Author: Chris Wilson +Date: Tue Jan 1 21:03:06 2013 +0000 + + sna/gen4+: Tidy special handling of 2s2s vertex elements + + Signed-off-by: Chris Wilson + +commit 8582c6f0bbe1bf01324b46933ff2f50c65f2a82d +Author: Chris Wilson +Date: Tue Jan 1 20:53:12 2013 +0000 + + sna/gen6+: Remove vestigial CC viewport state + + Signed-off-by: Chris Wilson + +commit 24264af2912f9abae5aff2a6fb5a50383d9e33be +Author: Chris Wilson +Date: Tue Jan 1 20:39:23 2013 +0000 + + sna: Fast path inplace addition of solid trapezoids + + Signed-off-by: Chris Wilson + +commit e9a9f9b02978cb2d73c38163827eb7141ebed16c +Author: Chris Wilson +Date: Tue Jan 1 16:40:28 2013 +0000 + + sna: Micro-optimise glyph_valid() + + Note that this requires fixing up the glyph->info if the xserver didn't + create a GlyphPicture. + + Signed-off-by: Chris Wilson + +commit 372c14aae8f4fd2c5865b9d23cd825dcbc33765f +Author: Chris Wilson +Date: Tue Jan 1 15:49:12 2013 +0000 + + sna: Remove some obsolete Options + + Throttling and delayed-flush are now redundant. + + Signed-off-by: Chris Wilson + +commit 65924da91da4bb617df1bb0a7c3e9d4aa475b6b1 +Author: Chris Wilson +Date: Tue Jan 1 11:40:15 2013 +0000 + + sna: Tidy compat interfaces + + Signed-off-by: Chris Wilson + +commit 0a35d9287397031c95ebd9dc53b68e33e7dcf092 +Author: Chris Wilson +Date: Tue Jan 1 11:12:02 2013 +0000 + + sna/gen2: Always try to use the BLT pipeline first + + Signed-off-by: Chris Wilson + +commit c1457fbd8a169ee19c8e625ea4e779180eb4b070 +Author: Chris Wilson +Date: Tue Jan 1 10:49:27 2013 +0000 + + sna/gen2: Tidy a pair of vertex emitters + + Switch to the new inline scaled transforms. + + Signed-off-by: Chris Wilson + +commit 48a5797c0f227204d0723de0ef34b046964c571e +Author: Chris Wilson +Date: Mon Dec 31 17:30:40 2012 +0000 + + sna/gen4: Tweak single-thread SF w/a for solids + + Allow multiple threads for the rare case of compositing with a solid + color. + + Signed-off-by: Chris Wilson + +commit e4f6ba6b47c41645a40e314f14047ba0b5f93a01 +Author: Chris Wilson +Date: Mon Dec 31 14:06:36 2012 +0000 + + sna/gen6+: Hint that we prefer to use the BLT with uncached scanouts + + Once again balancing the trade-off of faster smaller copies with the BLT + versus the faster larger copies the RENDER ring. + + Signed-off-by: Chris Wilson + +commit 6e87e7ddfe0c21e0fb6b3c2cb940a40aa7d4e061 +Author: Chris Wilson +Date: Mon Dec 31 14:03:16 2012 +0000 + + sna/dri: Use the default choice of backend for copying the region + + Notably, if everything is idle, using the BLT is a win as we can emit + them so much faster than a rendercopy, and as the target is uncached we + do not benefit as much from the rendercache. + + Signed-off-by: Chris Wilson + +commit a7988bf77f5a106a48b6e39b6eaf60ef2f8bec11 +Author: Chris Wilson +Date: Sun Dec 30 14:50:49 2012 +0000 + + sna/dri: Fix triple buffering to not penalise missed frames + + Signed-off-by: Chris Wilson + +commit 736b89504a32239a0c7dfb5961c1b8292dd744bd +Author: Chris Wilson +Date: Sun Dec 30 10:32:18 2012 +0000 + + uxa: Align surface allocations to even tile rows + + Align surface sizes to an even number of tile rows to cater for sampler + prefetch. If we read beyond the last page we may catch the PTE in a + state of flux and trigger a GPU hang. Also detected by enabling invalid + PTE access checking. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56916 + References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 + Signed-off-by: Chris Wilson + +commit 43336c632beb5d599ec0fc614434b88ef7a26422 +Author: Chris Wilson +Date: Sat Dec 29 16:47:53 2012 +0000 + + sna: Seed the solid color cache with an invalid value to prevent false hits + + After flushing, we *do* need to make sure we cannot hit a false lookup + via the last cache. + + Signed-off-by: Chris Wilson + +commit f6050382095c3bc4f78bc4ff9e9c6086e58d6b28 +Author: Chris Wilson +Date: Sat Dec 29 16:41:03 2012 +0000 + + sna/dri: Gracefully handle failures from pageflip + + Signed-off-by: Chris Wilson + +commit 1c2ece369177ea6c3fd2f254b2554ceadf5590de +Author: Chris Wilson +Date: Sat Dec 29 15:53:23 2012 +0000 + + sna/gen4+: Try using the BLT before doing a tiled copy + + Signed-off-by: Chris Wilson + +commit 09ca8feb3455c979e799ddf26daae8f2de2813e1 +Author: Chris Wilson +Date: Sat Dec 29 15:42:02 2012 +0000 + + sna: Move the primary color cache into the alpha cache + + Signed-off-by: Chris Wilson + +commit 8c56c9b1da9e078bd5b7ff4ebc5d8b23f593d500 +Author: Chris Wilson +Date: Sat Dec 29 14:14:41 2012 +0000 + + sna: Allow a flush to occur before batching a flush-bo + + Signed-off-by: Chris Wilson + +commit 2f53fb389c001f68134f514e30e25e91de41fb9d +Author: Chris Wilson +Date: Fri Dec 28 22:58:02 2012 +0000 + + sna: DBG compile fixes + + Signed-off-by: Chris Wilson + +commit dba83dacd2ccbb2ac23b205ce2a872a889fa30bd +Author: Chris Wilson +Date: Fri Dec 28 19:23:36 2012 +0000 + + sna/gen3: Use inline transform+scale function + + So as to avoid reading back from the vbo (which may be wc mapped). + + Signed-off-by: Chris Wilson + +commit f0fca544b0602bc4ed2f68e8d260e0a3745b4bad +Author: Chris Wilson +Date: Fri Dec 28 18:52:44 2012 +0000 + + sna/gen4+: Check for a spare exec slot for an outstanding vbo + + Signed-off-by: Chris Wilson + +commit c6e850b626f4bb44876c683d596ea38f8f6c30ae +Author: Chris Wilson +Date: Fri Dec 28 17:14:52 2012 +0000 + + sna/gen4+: Trim an extraneous coordinate from solid composite emission + + Signed-off-by: Chris Wilson + +commit 3fdc9923447538ed65bf9ffa189d7290ce804730 +Author: Chris Wilson +Date: Fri Dec 28 17:14:52 2012 +0000 + + sna/gen4+: Trim an extraneous coordinate from solid span emission + + Signed-off-by: Chris Wilson + +commit fdd6d222bc92b3e385f5d62f5e03dfd86f290e45 +Author: Chris Wilson +Date: Fri Dec 28 17:08:00 2012 +0000 + + sna/gen4+: Tidy emit_spans_affine() + + gcc produced abysmal code for the inlined emission, so hand unroll it + for sanity. + + Signed-off-by: Chris Wilson + +commit 5d222d4d21e6e3af5316728e0da49a014e9fea21 +Author: Chris Wilson +Date: Fri Dec 28 17:08:00 2012 +0000 + + sna/gen4+: Tidy emit_spans_solid() + + gcc produced abysmal code for the inlined emission, so hand unroll it + for sanity. + + Signed-off-by: Chris Wilson + +commit 4528f68eff33a5c2f9c1d884e9b3f7228053e0f4 +Author: Chris Wilson +Date: Fri Dec 28 16:45:50 2012 +0000 + + sna: Only allocate a busy CPU bo for a GPU readback + + Signed-off-by: Chris Wilson + +commit 99fdd1a1c6aa52688c2c821a90f86700b7ee34b2 +Author: Chris Wilson +Date: Fri Dec 28 16:33:59 2012 +0000 + + sna: Mark kgem_bo_retire() as static + + The exported function is not used, so mark it static and strengthen the + assertions. + + Signed-off-by: Chris Wilson + +commit 548d284b8cf8cc2b311efe3287e0ae956738189a +Author: Chris Wilson +Date: Fri Dec 28 14:49:38 2012 +0000 + + sna: Skip copying fbcon if we are already on the scanout + + If we are already the scanout, then there is little point copying to + ourselves... Should be paranoia. + + Signed-off-by: Chris Wilson + +commit 583efd4ba067a0a4319e43ebc18dd81ed9c8db0a +Author: Chris Wilson +Date: Thu Dec 27 17:59:59 2012 +0000 + + sna: Sanity check config->compat_output + + In a headless setup this may be left initialised to -1. + + Signed-off-by: Chris Wilson + +commit 7725df8aa1b3eab97618311e3f24769a318bd804 +Author: Chris Wilson +Date: Thu Dec 27 14:01:59 2012 +0000 + + sna/gen2,3: Remove gen-specific vertex_offset + + Remove the duplication of vertex_offset in favour of the common + vertex_offset. + + Signed-off-by: Chris Wilson + +commit 46af1ff126f3fb1f9470b0cbb19c7c2b09d5b92a +Author: Chris Wilson +Date: Thu Dec 27 00:40:08 2012 +0000 + + sna/gen6+: Tidy up ring preferences + + Remove a few duplicated tests. + + Signed-off-by: Chris Wilson + +commit dd5b653aa2c5fe2e062533db35c83a40c1952ea6 +Author: Chris Wilson +Date: Thu Dec 27 09:54:35 2012 +0000 + + sna: Do not try and set a 0x0 mode + + Signed-off-by: Chris Wilson + +commit 861c2362dd38d7d43fe7ffb181cb197199a1c570 +Author: Chris Wilson +Date: Wed Dec 26 14:12:42 2012 +0000 + + sna/gen6+: Tweak to only consider active ring on destination + + Otherwise we decide to use BLT when hitting the render/sampler cache + is preferrable for a source bo. + + Signed-off-by: Chris Wilson + +commit f9b6aa3aaf784f9149e091a646673ddf341cd7ca +Author: Chris Wilson +Date: Wed Dec 26 13:05:52 2012 +0000 + + sna: Explicitly track self-relocation entries + + Avoid having to walk the full relocation array for the few entries that + need to be updated for the batch buffer offset. + + Signed-off-by: Chris Wilson + +commit 90b1b220ee7a3c543301956b01c54a4a04632db4 +Author: Chris Wilson +Date: Wed Dec 26 12:51:58 2012 +0000 + + 2.20.17 release + + Signed-off-by: Chris Wilson + +commit 52fd223fc970118cbdcb31f9574414debc905e9c +Author: Chris Wilson +Date: Fri Dec 21 21:36:30 2012 +0000 + + sna/video: Initialise alignment for video ports > 0 + + We repeatedly set the alignment value on the first port, rather than + once for each. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 3793ccf7804cfc870b46c623dfeefbe0c381c1d4 +Author: Chris Wilson +Date: Fri Dec 21 14:48:07 2012 +0000 + + sna: Remove assertions that the pixmap is wholly defined when uploading + + As the user may only write to a portion of a pixmap (thus only creating + a small amount of damage) and then attempt to use the whole as a source, + we run the risk of triggering an assertion that the whole was defined. + + Signed-off-by: Chris Wilson + +commit 07dde33a4f51941b4f612823ea6ea7ca01a6efbc +Author: Chris Wilson +Date: Fri Dec 21 14:35:32 2012 +0000 + + sna: Remove a pair of stale assertions + + For gen2-5, it does not matter what mode the batch is in when we + insert the scanline wait. With the more aggressive batch flushing, and + relaxed assigned of mode for those generations, we are likely to see + that the batch is idle when we go to insert the waits. + + Signed-off-by: Chris Wilson + +commit bdd0cca4e1192df0038621925c4e6243ba419a81 +Author: Chris Wilson +Date: Fri Dec 21 14:20:23 2012 +0000 + + sna: Refactor test for a rotation matrix + + Signed-off-by: Chris Wilson + +commit 347c5a7b33729f1bedd408d2ef24756d51b66f1d +Author: Chris Wilson +Date: Fri Dec 21 10:40:47 2012 +0000 + + sna/dri: Refactor get_current_msc between blit/flip paths + + Signed-off-by: Chris Wilson + +commit 8a67d3f808fcc7c8c51553b1703e8312f28b87a1 +Author: Chris Wilson +Date: Fri Dec 21 10:21:06 2012 +0000 + + sna/dri: Set the correct current_msc for the no readback path + + If we are asked to render immediately, then in order to pass the tests + when comparing it to target, we need to set the current_msc to the + ultimate future value, -1. + + Signed-off-by: Chris Wilson + +commit 48e4dc4bd4b2980f0f804f572d0e3fc1bb4bc21e +Author: Chris Wilson +Date: Thu Dec 20 21:54:25 2012 +0000 + + sna/gen4: Backport tight vertex packing of renderblits + + Signed-off-by: Chris Wilson + +commit 08d2b073692836aa22f65f8ba30db5d14550c03e +Author: Chris Wilson +Date: Thu Dec 20 21:30:32 2012 +0000 + + sna/gen4: Backport more recent state tracking tweaks + + Signed-off-by: Chris Wilson + +commit 8ff76fad1fadc5e309f9a12c30f883460a432049 +Author: Chris Wilson +Date: Thu Dec 20 20:57:40 2012 +0000 + + sna/gen5: Backport tight vertex packing for simple renderblits + + Signed-off-by: Chris Wilson + +commit 9144c951915a1e0c1899a72161f9f0f1ab9b9ac4 +Author: Chris Wilson +Date: Fri Dec 21 09:44:52 2012 +0000 + + sna/dri: Avoid querying the current-msc with swapbbufers wait disabled + + Signed-off-by: Chris Wilson + +commit 84c327e17f68c4a56fcb76be1f45ab6d35291b5d +Author: Chris Wilson +Date: Thu Dec 20 19:44:46 2012 +0000 + + sna/video: Assert that the frame is initialised + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 4d750219925cb3199ebc6751cdbd2862dfb4cdfe +Author: Chris Wilson +Date: Thu Dec 20 19:34:41 2012 +0000 + + uxa/dri: Correct the destination of the blit after chained flip is broken + + Signed-off-by: Chris Wilson + +commit ca5c028c2b4d9bf02002acd484054fe427ea8d09 +Author: Chris Wilson +Date: Thu Dec 20 19:31:44 2012 +0000 + + glamor: Release the drawable after passing to glamor_push_pixels + + An unlikely path, but a double prepare instead of a prepare/finish. + + Signed-off-by: Chris Wilson + +commit de2de36049e2958a60f63fadffe8f54de8da1e56 +Author: Chris Wilson +Date: Thu Dec 20 19:29:31 2012 +0000 + + sna: Check the correct variable for a failed allocation + + Having already checked 'dst' and just allocated 'src', that is who we + should be checking. + + Signed-off-by: Chris Wilson + +commit deb908fda74541fba649349db279715b05d0554e +Author: Chris Wilson +Date: Thu Dec 20 19:22:32 2012 +0000 + + intel: ODEV_ATTRIB_PATH is no longer printed, so kill the temporary variable + + Signed-off-by: Chris Wilson + +commit 0f84ecfc3cd7dfe7f43ff99a6498d2ceccd90225 +Author: Chris Wilson +Date: Thu Dec 20 12:00:00 2012 +0000 + + sna/gen4+: Amalgamate all the gen4-7 vertex buffer emission + + Having reduced all the vb code for these generations to the same set of + routines, we can refactor them into a single set of functions. + + Signed-off-by: Chris Wilson + +commit 1f4ede0ef8f8a8d07e11781ad05617ecdfcd3faf +Author: Chris Wilson +Date: Wed Dec 19 20:39:10 2012 +0000 + + sna: Do not throttle before move-to-cpu + + The idea being that when creating a surface to perform inplace + rasterisation, we won't be using the GPU for a while and so give it time + to naturally throttle. + + Signed-off-by: Chris Wilson + +commit 5deba2832dc42072d9abaeaa7934bc0e1b28b3ed +Author: Chris Wilson +Date: Wed Dec 19 20:03:33 2012 +0000 + + sna: Ignore throttling during vertex close + + Signed-off-by: Chris Wilson + +commit f91a24fdba517c8e9df5a074db2c789fbf066bb3 +Author: Chris Wilson +Date: Thu Dec 20 09:46:32 2012 +0000 + + sna/video: Remove XvMCScreenInitProc + + The symbols disappears without warning in xorg-1.14 + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58552 + Signed-off-by: Chris Wilson + +commit ee99511846a0f10abeeba8d25d8fb5bf59621b02 +Author: Chris Wilson +Date: Wed Dec 19 18:02:50 2012 +0000 + + sna/gen4+: Tweak preference of GPU placement for spans + + If the CPU bo is busy, make sure we do not stall for an inplace + operation. + + Signed-off-by: Chris Wilson + +commit bfd96b092db5e4e0fc2446752deafd1156cf37b3 +Author: Chris Wilson +Date: Tue Dec 18 20:54:33 2012 +0000 + + sna/video: Fix presentation of cropped sprites + + Signed-off-by: Chris Wilson + +commit 2df1b1abf0728f28d2803a096f945779cbe7c70b +Author: Chris Wilson +Date: Tue Dec 18 16:07:26 2012 +0000 + + sna/video: Fix up copying cropped textured video packed data + + Simply ignore the cropping and copy the whole plane rather than + complicate the computation of the packed destination pixels. + + Signed-off-by: Chris Wilson + +commit 8d523fa824dcb1987557164d048711c1745de378 +Author: Chris Wilson +Date: Tue Dec 18 16:07:26 2012 +0000 + + sna/video: Fix up destination offset for copying cropped textured video planes + + Oh fun. Textured video expects the source content to be relative to the + origin, whereas overlay video expects the source at the origin. + + Signed-off-by: Chris Wilson + +commit 7bb4573fcc2cf1b8b6bff5d885a2fa81200d2fd7 +Author: Chris Wilson +Date: Tue Dec 18 15:48:21 2012 +0000 + + sna/video: Fix up the image size for copying + + Yikes, setting image.x2 == image.x1 meant no data was copied whilst the + video was clipped. + + Signed-off-by: Chris Wilson + +commit 551b400377ddc5eb1e89b8b5827a42e810c8d23d +Author: Chris Wilson +Date: Tue Dec 18 15:14:00 2012 +0000 + + sna/video: Amalgamate the computation of source vs dest offsets + + Signed-off-by: Chris Wilson + +commit d96a226cc59c641c10153ae3a086a5138c852423 +Author: Chris Wilson +Date: Tue Dec 18 14:26:18 2012 +0000 + + sna/video: Fix adjustment of drawable vs source origin wrt to clip + + Signed-off-by: Chris Wilson + +commit 79cb6304e983514dd754065e65e2381a903f9bd6 +Author: Chris Wilson +Date: Tue Dec 18 13:49:59 2012 +0000 + + sna/xvmc: Clean up to avoid crash'n'burn + + Signed-off-by: Chris Wilson + +commit 0d26082303f3f4006ce4974d402c560613081b23 +Author: Chris Wilson +Date: Tue Dec 18 10:54:28 2012 +0000 + + sna: Prefer the GPU once again for PolyPoint + + Signed-off-by: Chris Wilson + +commit 0e0a2d300633122d6d0f6f82ff110f513b4e64d7 +Author: Chris Wilson +Date: Tue Dec 18 10:27:04 2012 +0000 + + sna/gen7: Mark the ring switch before checking bo + + As we may do a batch submission due to the change of mode. + + Signed-off-by: Chris Wilson + +commit f522fbe7c98ffad86126c3666b2d9f7e616480b8 +Author: Chris Wilson +Date: Mon Dec 17 23:04:25 2012 +0000 + + sna: Refine check for an unset context switch + + So it appears that we end up performing a context switch on an empty + batch, but already has a mode. This is caught later, too late, by + assertions. However, we can change the guards slightly to prevent those + assertions without altering the code too greatly. And I can then think + how to detect where we are setting a mode on the batch but doing no + work - which is likely masking a bigger bug. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 6c50cf4809816dbbd93d54f589a79b0dab996180 +Author: Chris Wilson +Date: Mon Dec 17 22:27:14 2012 +0000 + + sna: Untangle the confusion of caching large LLC bo + + We only use a single cache for very large buffers, so we need to be + careful that we set the tiling on them. More so, we need to take extra + care when allocating large CPU bo from that cache to be sure that they + are untiled and the flags are true. + + Signed-off-by: Chris Wilson + +commit e474abea7cf761e78e777db07b41ec99c0b6f59f +Author: Chris Wilson +Date: Mon Dec 17 15:38:04 2012 +0000 + + sna: Promote pinned-batches to run-time detection + + Now that the feature has been committed upstream, we can rely on the + runtime detection. + + Signed-off-by: Chris Wilson + +commit 4d7e3a9123cf41d2dd97c0a8a0d461c189064822 +Author: Chris Wilson +Date: Mon Dec 17 12:34:05 2012 +0000 + + uxa: Fix copy'n'paste of false not FALSE + + Bugzilla; https://bugs.freedesktop.org/show_bug.cgi?id=58406 + Signed-off-by: Chris Wilson + +commit 7a4d1136bd09bfd4d2657c0b1b64d553eeb6ed4f +Author: Chris Wilson +Date: Mon Dec 17 09:41:47 2012 +0000 + + sna/video: Pass along the video source offset + + Fortunately nobody had yet noticed that all videos were assumed to play + with a matching src/dst origin. + + Signed-off-by: Chris Wilson + +commit dfe9d18f9f97a77ceeb410307010424c789c8bd1 +Author: Chris Wilson +Date: Mon Dec 17 01:06:57 2012 +0000 + + sna: Limit the default upload buffer size to half the cpu cache + + This seems to help with small slow caches. + + Signed-off-by: Chris Wilson + +commit 5b0572503eab235bc7eff20d369241330c41e630 +Author: Chris Wilson +Date: Sun Dec 16 23:04:55 2012 +0000 + + sna: Enable support for opting out of the kernel CS workaround + + Keeping a set of pinned batches in userspace is considerably faster as + we can avoid the blit overhead. However, combining the two approaches + yields even greater performance, as fast as without either w/a, and yet + stable. + + Signed-off-by: Chris Wilson + +commit 805f78addf3ffb36c736df680806cf722b18fea9 +Author: Chris Wilson +Date: Sun Dec 16 22:04:54 2012 +0000 + + sna: Try to reuse pinned batches by inspecting the kernel busy status + + Signed-off-by: Chris Wilson + +commit f1aec676810c4a4c180b342d9a83254e08dd55da +Author: Chris Wilson +Date: Sun Dec 16 17:37:32 2012 +0000 + + sna: Precompute the base set of batch-flags + + This is to make it easier to extend in future. + + Signed-off-by: Chris Wilson + +commit c7ac12003bd0c7d85fa47d43ee2734b222d84a61 +Author: Chris Wilson +Date: Sun Dec 16 15:28:24 2012 +0000 + + sna: Only flush at the low fence wm if idle + + Signed-off-by: Chris Wilson + +commit 4580bbeac0051417cb03f272112b0cfe697e31b3 +Author: Chris Wilson +Date: Sun Dec 16 15:00:21 2012 +0000 + + intel: Support debugging through AccelMethod + + Ease debugging by allowing all acceleration or render acceleration to be + disabled through AccelMethod: + + Option "AccelMethod" "off" -> disable all acceleration + Option "AccelMethod" "blt" -> disable render acceleration (only use BLT) + + Signed-off-by: Chris Wilson + +commit 58770b7d6401d2d81f7fee1c8c0e788d44149712 +Author: Chris Wilson +Date: Sun Dec 16 14:59:03 2012 +0000 + + man: Describe Option "AccelMethod" + + Signed-off-by: Chris Wilson + +commit 83609af3681fad58af88387077bf7ce0c001a1da +Author: Chris Wilson +Date: Sun Dec 16 10:53:26 2012 +0000 + + sna: Tweak the idle SHM CopyArea path to also replace a busy GPU bo + + Signed-off-by: Chris Wilson + +commit 6490585f65bde487da7bc41fa5cb1c5a028d0bf4 +Author: Chris Wilson +Date: Sat Dec 15 23:26:30 2012 +0000 + + sna: Do not force use of the GPU for a copy from a SHM pixmap + + As we will undoubtably flush and sync upon the SHM request very shortly + afterwards, we only want to use the GPU for the SHM upload iff it is + currently busy. + + Signed-off-by: Chris Wilson + +commit 3a08f091875f2f0f49697ba9852077094b3a704b +Author: Chris Wilson +Date: Sat Dec 15 22:53:44 2012 +0000 + + sna/gen6+: Tweak prefer-blt-bo + + Split the decision between where it is imperative to use the BLT to + avoid TLB misses and the second case where it is merely preferential to + witch. + + Signed-off-by: Chris Wilson + +commit ac9ef1fc606e87b48baa47be22bf828dcfe6659f +Author: Chris Wilson +Date: Sat Dec 15 20:49:56 2012 +0000 + + sna/gen6+: Keep the bo on its current ring + + Track the most recent ring each bo is executed on, and prefer to keep it + on that ring for the next operation. + + Signed-off-by: Chris Wilson + +commit 15ccb7148d15d776a661c1b8c5b9b2360fcae4ad +Author: Chris Wilson +Date: Sat Dec 15 20:07:56 2012 +0000 + + sna/gen6+: Apply the is_scanout to the key not value in the binding cache + + Oops, we never managed to reuse the cached location of the target + surface as we entered it into the cache with the wrong key. + + Signed-off-by: Chris Wilson + +commit fde25b08922d97ca0d4a69c654bf690edbd53b3d +Author: Chris Wilson +Date: Sat Dec 15 18:59:53 2012 +0000 + + sna/trapezoids: Add another inline hint + + cell_list_alloc() is only called from one place, and the compiler should + already be inlining it - but does not appear to be. Hint harder. + + Signed-off-by: Chris Wilson + +commit 2a21c8b351052be9c32c5669264fb05a8510c957 +Author: Chris Wilson +Date: Sat Dec 15 17:56:27 2012 +0000 + + sna: Include shm hint in render placement + + The goal is to reduce the preference of rendering to a SHM pixmap - only + if it is already active, will we consider continuing to use it on the + GPU. + + Signed-off-by: Chris Wilson + +commit a467102a9539c7f4fa8d0700ecdcaba49d77b3f7 +Author: Chris Wilson +Date: Sat Dec 15 10:00:48 2012 +0000 + + 2.20.16 release + + Signed-off-by: Chris Wilson + +commit b0f8c823b6cafdfdd064c09d58174f946e290541 +Author: Chris Wilson +Date: Sat Dec 15 09:28:04 2012 +0000 + + sna/dri: Fallback to a blit after a failed flip + + ...rather than force the exchange. + + Signed-off-by: Chris Wilson + +commit 2c71a8e08abce74b269687d3a6c1edd7f9d643d3 +Author: Chris Wilson +Date: Sat Dec 15 09:27:07 2012 +0000 + + sna/dri: Honour TripleBuffer Option + + In case anyone ever wants to disable the default. + + Signed-off-by: Chris Wilson + +commit 6593ad3fecb3d044ee5ca161176d8ecaa0b4126a +Author: Chris Wilson +Date: Fri Dec 14 23:48:00 2012 +0000 + + sna/dri: Store and check size of front/back bo attached to a DRI2 drawable + + So that we can prevent feeding back a stale bo when the DRI2 client + tries to swap an old buffer. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57212 + Signed-off-by: Chris Wilson + +commit 9df9585cb00958b42461b3139bb7aec32090a869 +Author: Chris Wilson +Date: Fri Dec 14 15:37:56 2012 +0000 + + sna: Reduce fence watermarks + + Further restrict the amount of fenced bo we try to fit into the batch to + make it easier for the kernel to accommodate the request. + + Signed-off-by: Chris Wilson + +commit 0d3ba44e448c152a570cc469d289ab057fa7be5c +Author: Chris Wilson +Date: Fri Dec 14 12:47:46 2012 +0000 + + sna/gen2+: Experiment with not forcing migration to GPU after CPU rasterisation + + Signed-off-by: Chris Wilson + +commit d867fd01cb0060342102a79600daf43e3dc44a07 +Author: Chris Wilson +Date: Fri Dec 14 13:10:54 2012 +0000 + + sna/gen3: Don't combine primitives if beginning a ca 2-pass + + Signed-off-by: Chris Wilson + +commit 3ca503dac2ea6c036e7ebe878b41923541daf225 +Author: Chris Wilson +Date: Fri Dec 14 12:49:14 2012 +0000 + + sna/gen3: Remove stray setting of vertex_start + + It is always done at the beginning of vertex emission. + + Signed-off-by: Chris Wilson + +commit 7f76f100e8033497620ee46548df45afff41064a +Author: Chris Wilson +Date: Thu Dec 13 23:12:42 2012 +0000 + + sna/gen2: Reorder reuse_source() to avoid NULL dereference for solids + + Signed-off-by: Chris Wilson + +commit 044a54c23384756a5dc1895473abf34f7abb3d83 +Author: Chris Wilson +Date: Thu Dec 13 23:05:30 2012 +0000 + + sna/gen2: Initialise channel->is_affine for solid + + In case we hit a path were we avoid reusing the source for the mask and + leave is_affine unset for a solid mask. + + Signed-off-by: Chris Wilson + +commit 29afd0dc8e893cc4110ee0d70546775dae86ddb3 +Author: Chris Wilson +Date: Thu Dec 13 22:53:18 2012 +0000 + + sna/gen2: Assertions + + Signed-off-by: Chris Wilson + +commit 4d2abe1e3daac74747535d88dff34b024b87bbe9 +Author: Chris Wilson +Date: Thu Dec 13 22:09:37 2012 +0000 + + sna/gen3: Remove incorrect optimisation of an opaque source for CA + + Signed-off-by: Chris Wilson + +commit d428dbf7ad7c246acb1c301b73b9df4a1309de03 +Author: Chris Wilson +Date: Thu Dec 13 14:53:50 2012 +0000 + + sna/gen2: Program solid mask using the DIFFUSE component + + Signed-off-by: Chris Wilson + +commit 9e7311516da81ab45484b291ec668503c5ded0bb +Author: Chris Wilson +Date: Thu Dec 13 14:40:25 2012 +0000 + + sna/gen2: Align surface sizes to an even tile + + Makes this 855gm much happier. + + Signed-off-by: Chris Wilson + +commit e646047a563598948206167765eaaf4192cfd77f +Author: Chris Wilson +Date: Thu Dec 13 14:23:54 2012 +0000 + + sna: Fix up BLT overwrite detection to use target_handle + + Signed-off-by: Chris Wilson + +commit 4f96439e39a4bf4b127af9ccfdc09d061caff9bd +Author: Chris Wilson +Date: Thu Dec 13 13:15:52 2012 +0000 + + sna: Fix typo for 830/845 gen + + Must remember, its octal not decimal. + + Signed-off-by: Chris Wilson + +commit f631a56bcb3ff1ce1942b828325a157cef1e0880 +Author: Chris Wilson +Date: Thu Dec 13 00:55:45 2012 +0000 + + sna: Only flush the batch after an actual relocation + + As we may write preparatory instructions into the batch before checking + for a flush. + + Signed-off-by: Chris Wilson + +commit 74bbf20e6e652cba55d6d0bc17066f4112f8548c +Author: Chris Wilson +Date: Wed Dec 12 21:56:22 2012 +0000 + + sna: Improve the initialisation failure path for pinned batches + + Simplify the later checks by always populating the lists with a single, + albeit unpinned, bo in the case we fail to create pinned batches. + + Signed-off-by: Chris Wilson + +commit 52c8c9218c8f28fb049b02214d833912a803f911 +Author: Chris Wilson +Date: Wed Dec 12 21:19:02 2012 +0000 + + sna: Fix the error path in kgem_init_pinned_batches() to use the right iter + + Signed-off-by: Chris Wilson + +commit c7f7dd61fd07dbf938fc6ba711de07986d35ce1f +Author: Chris Wilson +Date: Wed Dec 12 19:43:19 2012 +0000 + + sna: Pin some batches to avoid CS incoherence on 830/845 + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=26345 + Signed-off-by: Chris Wilson + +commit b154d0dc404a152e1283a013a78be06b8d734867 +Author: Chris Wilson +Date: Wed Dec 12 18:34:54 2012 +0000 + + sna/gen2: STIPPLE requires an argument + + Signed-off-by: Chris Wilson + +commit 9001263b32efde1361555432914d9ac3ee780511 +Author: Chris Wilson +Date: Wed Dec 12 12:03:40 2012 +0000 + + sna/gen3+: Use nearest for unscaled videos + + If the output is unscaled, then we do not require pixel interpolation + (and planar formats are exactly subsampled). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=58185 + Signed-off-by: Chris Wilson + +commit 2dbe7d91a7f15a3a9ddad696c5088ca98898fca2 +Author: Chris Wilson +Date: Wed Dec 12 09:50:34 2012 +0000 + + sna/gen4: Use the single-threaded SF w/a for spans as well + + Fixes the flickering seen in the fishtank demo, for example. + + Signed-off-by: Chris Wilson + +commit 2502218a9340044bb660be68f059971119077e29 +Author: Chris Wilson +Date: Tue Dec 11 17:47:09 2012 +0000 + + sna/dri: Fix handling of current_msc > target_msc + + Signed-off-by: Chris Wilson + +commit 39d6c65f437d7877c1647b7ecf45e76daabc76a6 +Author: Chris Wilson +Date: Tue Dec 11 15:30:54 2012 +0000 + + sna/dri: Query current msc before use + + Might be worth caching the last-known-value so we can skip the query for + an old swap request. + + Signed-off-by: Chris Wilson + +commit 162e9a2bfc693db186aa481551cf76b3dc5ee55c +Author: Chris Wilson +Date: Mon Dec 10 23:11:48 2012 +0000 + + sna/dri: Disable name exchanges for SwapBuffers + + The DRI2 protocol is inherently racy. Fortuituously, this can be swept + under the carpet by forcing the serialisation between the DRI2 clients + by using a blit for the SwapBuffers. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=58005 + Signed-off-by: Chris Wilson + +commit 0c2287c735f990a98b39d00f28168d7a5df25aba +Author: Chris Wilson +Date: Mon Dec 10 20:09:22 2012 +0000 + + sna/dri: Only special case 'divisor && msc-passed' for immediate flipping + + As Jesse pointed out, it is legal for the client to request that the + flip be some frame in the future even with no divisor. + + Signed-off-by: Chris Wilson + +commit 2ab29a1688cd313768d928e87e145570f35b4a70 +Author: Jesse Barnes +Date: Mon Dec 10 14:55:32 2012 -0800 + + dri2: don't schedule a flip prematurely at ScheduleSwap time + + If divisor is 0 but the current MSC is behind the target, we shouldn't + schedule a flip (which will occur at the next vblank) or we'll end up + displaying it early and returning the wrong timestamp. + + Preserve the optimization though by allowing us to schedule a flip if + both the divisor is 0 and the current MSC is equal to or ahead of the + target; this avoids a round trip through the kernel. + + Reported-by: Mario Kleiner + Signed-off-by: Jesse Barnes + +commit 986e13a56a8544d5b32dbcaacbc0ee9cf5d47e27 +Author: Chris Wilson +Date: Mon Dec 10 17:29:08 2012 +0000 + + sna: Try installing a fallback config on VT enter in case full desiredMode fails + + This can happen naturally for 3-pipe config on Ivybridge or if the + outputs are rearranged whilst we slept. Instead of failing to change the + display on the VT, install at least a fb on the CompatOutput so that + hopefully the DE can take over, or give some control to the user. + + Signed-off-by: Chris Wilson + +commit 8c3b82f207bc8cf697646d3324cb4103da3b7856 +Author: Chris Wilson +Date: Mon Dec 10 16:20:52 2012 +0000 + + sna: Avoid reusing the same 'busy' bit for two different meanings. + + Oops, I thought the 'busy' bit was now used and apparently forgot it is + used to control the periodic flushing... + + Signed-off-by: Chris Wilson + +commit d1b479a3404e6b52a23e0443c36d0682cbaf3c2f +Author: Chris Wilson +Date: Mon Dec 10 11:16:04 2012 +0000 + + sna: Compromise and only flush a split batch if writing to scanout + + A compromise between not flushing quick enough and flushing too often, + hopefully. + + Signed-off-by: Chris Wilson + +commit 3e9120d73c6f0c0e06b617da91cc2edce4434bc3 +Author: Chris Wilson +Date: Mon Dec 10 11:05:16 2012 +0000 + + sna: Immediately flush a split batch + + If we submit a batch early (for example if the GPU is idle), then submit + whatever else the client drew immediately upon completion of its + blockhandler. This is required to prevent flashing due to visible delay + between the clear at the start of the cycle and then the overdraw later. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=51718 + Signed-off-by: Chris Wilson + +commit aa8c5d8201006397bb32ed6bc28618f9aa77a68a +Author: Chris Wilson +Date: Thu Dec 6 22:08:08 2012 +0000 + + sna/sprite: Add a DBG to report whether the kernel supports sprites + + Signed-off-by: Chris Wilson + +commit 25c0d440dee45c03f5e45b8e0e45071c0c32f507 +Author: Chris Wilson +Date: Sun Dec 9 12:11:53 2012 +0000 + + sna: Move source to CPU prior to referencing for inplace trapezoids + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56825 + Signed-off-by: Chris Wilson + +commit 3e82fcc8d243b7ffe1a3d3249a5cdb5fd068093f +Author: Chris Wilson +Date: Sun Dec 9 11:19:13 2012 +0000 + + sna/gen4+: Refine test for preferring GPU spans + + Signed-off-by: Chris Wilson + +commit c8f622726a4463b419d032b379576cfb3bc492df +Author: Chris Wilson +Date: Sun Dec 9 09:26:03 2012 +0000 + + sna: Replace remaining kgem_is_idle() with kgem_ring_is_idle() + + Further experimentation... + + Signed-off-by: Chris Wilson + +commit 4e4e10935d2815fb62aeaedbfffe10aad115ec0b +Author: Chris Wilson +Date: Sat Dec 8 22:39:32 2012 +0000 + + sna: Flush upon change of target if GPU is idle + + The aim is to improve GPU concurrency by keeping it busy. The possible + complication is that we incur more overhead due to small batches. + + Signed-off-by: Chris Wilson + +commit cef11795f627a393d4254845b0a19eefbf6c782c +Author: Chris Wilson +Date: Fri Dec 7 17:40:37 2012 +0000 + + sna: Convert the ring from BLT/3D to the internal index for kgem_ring_is_idle() + + Signed-off-by: Chris Wilson + +commit 52405b2aed492dc7f76fbf082122842f621e7c06 +Author: Chris Wilson +Date: Fri Dec 7 17:24:42 2012 +0000 + + sna: Only inspect the target ring for busyness + + Signed-off-by: Chris Wilson + +commit 4b7bbb2a23b03bac63f864c33f47fab88dedbf67 +Author: Chris Wilson +Date: Fri Dec 7 16:43:32 2012 +0000 + + sna: Only flush before adding fresh surfaces to the batch + + Previously, before every operation we would look to see if the GPU was + idle and we were running under a DRI compositor. If the GPU was idle, we + would flush the batch in the hope that we reduce the cost of the context + switch and copy from the compositor (by completing the work earlier). + However, we would complete the work far too earlier and as a result + would need to flush the batch before every single operation resulting in + extra overhead and reduced performance. For example, the gtkperf + circles benchmark under gnome-shell/compiz would be 2x slower on + Ivybridge. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 65a8c23ca1bc8e2ebd087027a30358704d4bf11c +Author: Chris Wilson +Date: Fri Dec 7 14:56:18 2012 +0000 + + sna: Only flush at the low apeture watermark if idle + + Signed-off-by: Chris Wilson + +commit 4bfc5e90f54be1b0997dec9e81796d67b376a01f +Author: Chris Wilson +Date: Thu Nov 8 23:42:10 2012 +0000 + + sna: Mark proxies as dirty on first relocation + + Signed-off-by: Chris Wilson + +commit 1d2fa5731b7ecfe34a8af809e45bcd3b0b70c890 +Author: Chris Wilson +Date: Thu Dec 6 22:15:09 2012 +0000 + + Remove the default log message + + Breaks compilation with xorg-1.13 + + Signed-off-by: Chris Wilson + +commit 7f4d4afa629bd18be89d7270e6178a865cf9586e +Author: Chris Wilson +Date: Thu Dec 6 17:08:15 2012 +0000 + + Fix compilation of UMS probe following 13f47008ec + + Signed-off-by: Chris Wilson + +commit d733f7d1f1dc343ac34c4a27ac99d71fc0572bc2 +Author: Chris Wilson +Date: Thu Dec 6 16:55:00 2012 +0000 + + sna/gen4+: Add common glyph-to-dst emitters + + Signed-off-by: Chris Wilson + +commit 13f47008ec411609968c40b8ec34dd495f14c50b +Author: Chris Wilson +Date: Thu Dec 6 14:05:33 2012 +0000 + + Refactor the common probe methods for scrn construction + + Signed-off-by: Chris Wilson + +commit 0040eb84c9187476a75202ebb251dd74354e4fc7 +Author: Chris Wilson +Date: Wed Dec 5 09:25:17 2012 +0000 + + sna: Don't disable CPU bo if supported on unknown hw + + Signed-off-by: Chris Wilson + +commit 14069f48645867a735ebdccb1e27a62364643c38 +Author: Chris Wilson +Date: Wed Dec 5 09:24:02 2012 +0000 + + sna: Assume that future hardware only gets more flexible + + E.g. that BLT can always write to cacheable memory, inflexible fences + are a thing of the past, etc. + + Signed-off-by: Chris Wilson + +commit b82bfcb54a6af0d1ee17806ef94d9da504cad606 +Author: Chris Wilson +Date: Tue Dec 4 17:26:47 2012 +0000 + + sna/gen6+: Cache the scanout targets separately to avoid override PTE caching + + Signed-off-by: Chris Wilson + +commit 626dd1324dd2c5b14ca4aff598b5eb1e45550e69 +Author: Chris Wilson +Date: Tue Dec 4 12:52:50 2012 +0000 + + sna/gen4: Workaround render corruption with multiple SF threads + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57410 + Signed-off-by: Chris Wilson + +commit dbdb8fabfbade3f19fd8af3524468b5e6668bb66 +Author: Chris Wilson +Date: Tue Dec 4 12:37:23 2012 +0000 + + sna/gen4: Special case solids through the general vertex emitter + + Signed-off-by: Chris Wilson + +commit a17354d5ce6aeeab3f6e42aba63fce06ad18c526 +Author: Chris Wilson +Date: Tue Dec 4 12:01:26 2012 +0000 + + sna/gen4: Remove unused CC viewport + + Signed-off-by: Chris Wilson + +commit b9afb9cb614d2ad44330eed03b3f577a35184a88 +Author: Chris Wilson +Date: Tue Dec 4 11:14:58 2012 +0000 + + sna/gen4: Avoid emitting URB_FENCE across a cache-line + + Old erratum. + + Signed-off-by: Chris Wilson + +commit 08c30c48bdd0db500498bd9617c15f37bacd8de9 +Author: Chris Wilson +Date: Mon Dec 3 13:23:33 2012 +0000 + + sna: Tidy addition of fake GTF modes for panels + + Signed-off-by: Chris Wilson + +commit 6f675eeaeade4728af566891b2afbe5b44fbdc2e +Author: Chris Wilson +Date: Mon Dec 3 10:47:35 2012 +0000 + + 2.20.15 release + + Signed-off-by: Chris Wilson + +commit 37eb7343be1aeeb90a860096756603a577df1a77 +Author: Chris Wilson +Date: Sat Dec 1 09:40:11 2012 +0000 + + sna/gen5: Inspired by gen4, reorder the flushing + + This may not be totally safe, but it is a nicer explanation for random + single character corruption. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + Signed-off-by: Chris Wilson + +commit a8a99428c14c8aed2082853cc60d0f98a1fa2d86 +Author: Chris Wilson +Date: Sat Dec 1 09:44:49 2012 +0000 + + sna/dri: Unknown generations are given the max value and presume i965_dri.so + + Signed-off-by: Chris Wilson + +commit 382bb7bf77fca412fdefd7c304f395d1fe9483b5 +Author: Chris Wilson +Date: Fri Nov 30 16:24:30 2012 +0000 + + sna/gen6+: Only apply the BLT w/a for self-copies + + Signed-off-by: Chris Wilson + +commit 1aee8acacfe5869a072d9f20f3b8290b16683260 +Author: Chris Wilson +Date: Fri Nov 30 12:17:25 2012 +0000 + + sna: Unify gen4 acceleration again + + After disabling render-to-Y, 965g seems just as happy with the new code + paths as g4x. + + Signed-off-by: Chris Wilson + +commit 5d6dd9c5a7eeb1f879525430ad89ab74d427e469 +Author: Chris Wilson +Date: Fri Nov 30 12:12:49 2012 +0000 + + Convert generation counter to octal + + Signed-off-by: Chris Wilson + +commit 131600020638ef15166361214cd5e1a0c08c2ea6 +Author: Chris Wilson +Date: Fri Nov 30 11:43:56 2012 +0000 + + sna: Prevent gen4 from rendering to I915_TILING_Y + + It always seems to end up in a hang... + + Signed-off-by: Chris Wilson + +commit ee4d1873ff504c2150b51d13864164b02b85dd53 +Author: Chris Wilson +Date: Fri Nov 30 09:52:49 2012 +0000 + + sna/g4x: And remove one more flush point + + Signed-off-by: Chris Wilson + +commit 1b6c1a30723b1d13e9bd3df0b59a8d75639c89be +Author: Chris Wilson +Date: Fri Nov 30 09:27:57 2012 +0000 + + sna: Increase tiling alignment to an even tile + + Seems to help g4x. + + Signed-off-by: Chris Wilson + +commit 6aeb6fdf75fa322d8f5ffe393337d8195d7a6a62 +Author: Chris Wilson +Date: Fri Nov 30 09:03:53 2012 +0000 + + sna/g4x: Remove the flush before the pipelined pointer changes + + This one appears unneeded. Hopefully. + + Signed-off-by: Chris Wilson + +commit 8be2c6695509809c0ab0c5c014e11dc733f73006 +Author: Chris Wilson +Date: Thu Nov 29 19:56:15 2012 +0000 + + sna/g4x: Emit the flush prior to changing pipelined state + + Signed-off-by: Chris Wilson + +commit 2d5d55702bb8eced32d5b8cb3c0cd125fd99d6dc +Author: Chris Wilson +Date: Wed Nov 28 15:46:29 2012 +0000 + + sna/gen6+: Override PTE cacheability bits for reads + + This is primarily useful for enabling the render cache for reads from + scanouts. + + Signed-off-by: Chris Wilson + +commit 3ed87945c9e83fefcbda053b616856658bf2ac8e +Author: Chris Wilson +Date: Wed Nov 28 11:05:40 2012 +0000 + + sna/gen5+: Disable max-vbo address + + As we do not use this feature, disable it and save the relocation. + + Signed-off-by: Chris Wilson + +commit b2c9e9da639a134577485f83e0f66f54e2371b98 +Author: Chris Wilson +Date: Tue Nov 27 11:32:11 2012 +0000 + + sna/blt: Avoid clobbering common state before converting to a BLT + + In case we need to continue on with the render operation, we need to + preserve the existing state. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=57601 + Signed-off-by: Chris Wilson + +commit 1e06d19a00f5a5a05369deeb3c5ae15b282c0f92 +Author: Chris Wilson +Date: Mon Nov 26 15:30:09 2012 +0000 + + sna: Disable shadow tracking upon regen + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56608 + References: https://bugs.freedesktop.org/show_bug.cgi?id=52255 + Signed-off-by: Chris Wilson + +commit d21ed3a6aba5ae227cc5ecd164f3c18bc48c69af +Author: Chris Wilson +Date: Mon Nov 26 10:34:28 2012 +0000 + + sna: Use a single execobject flag to mark read/write domains + + Slight modification to the proposed API to only pass the simplified + domain tracking now performed by the kernel. + + Signed-off-by: Chris Wilson + +commit 7a904ce839933d57176e013cdad147533c33ca2f +Author: Chris Wilson +Date: Mon Nov 26 08:48:31 2012 +0000 + + 2.20.14 release + + Signed-off-by: Chris Wilson + +commit 1367e3f9ef5f606c8927cbde441a2ea41fa6d025 +Author: Chris Wilson +Date: Sun Nov 25 00:24:45 2012 +0000 + + sna: Exploit the alpha-fixup of the BLT for texture format conversions + + Signed-off-by: Chris Wilson + +commit 6d6399f97cf7cb91dcf89e9a5cd1243f761e4314 +Author: Chris Wilson +Date: Sun Nov 25 00:05:44 2012 +0000 + + sna: Transform a simple repeat pattern into range of the BLT + + Signed-off-by: Chris Wilson + +commit 39f1e228b74e98d3d87157cf093fc56ca31e6b13 +Author: Chris Wilson +Date: Sat Nov 24 20:16:29 2012 +0000 + + sna: Make GPU idle more consistent during wakeup + + Signed-off-by: Chris Wilson + +commit 40b6121746c55153de444ccb753df80706ff3a69 +Author: Chris Wilson +Date: Fri Nov 23 18:21:41 2012 +0000 + + sna/g4x: Refine the w/a for the broken sf shader + + Signed-off-by: Chris Wilson + +commit e0b906b09697b5fe7a5be2fdc52abd9b1c73f96d +Author: Chris Wilson +Date: Fri Nov 23 18:01:25 2012 +0000 + + sna/g4x: Use the render pipeline more often for composite operations + + Signed-off-by: Chris Wilson + +commit 54d8968da5ae39bfbcad511322926931bce2bda3 +Author: Chris Wilson +Date: Fri Nov 23 17:47:49 2012 +0000 + + sna/gen4: Revert changes to 965g[m] + + The changes tested on g45/gm45 prove to be highly unstable on 965gm, + suggesting a radical difference in the nature of the bugs between the + two generations. In theory, g4x has additional features that could be + exploited over and above gen4 which may prove interesting in the future. + + Signed-off-by: Chris Wilson + +commit d560296561f68c3ac841345c0f4ce2c8e7381156 +Author: Chris Wilson +Date: Fri Nov 23 16:35:06 2012 +0000 + + sna/gen4: Don't force a flush for the dirty target if the we do not read back + + Signed-off-by: Chris Wilson + +commit 4023b2044757a9a67d564be0c8adf4885973a6e3 +Author: Chris Wilson +Date: Fri Nov 23 15:42:18 2012 +0000 + + sna/gen4: Force composite(WHITE, glyph) for building the glyphstring mask + + For reasons that are not apparent, if we don't composite with + source/mask for the glyph strings, there appears to be some cache + corruption. About as bizarre as the rest of gen4 idiosynacracies. + + Signed-off-by: Chris Wilson + +commit f74b62755c6e41097c23cc506984859e556a3415 +Author: Chris Wilson +Date: Fri Nov 23 14:59:42 2012 +0000 + + sna/gen4: Set composite op before testing for a BLT compatible op + + Signed-off-by: Chris Wilson + +commit 4c922eb52cadb867a0a15929e5a214c84a5992f3 +Author: Chris Wilson +Date: Fri Nov 23 14:19:59 2012 +0000 + + sna/gen4: Pass the mask channel explicitly rather than through a dummy mask + + Signed-off-by: Chris Wilson + +commit 2e68efa8ec66b4c89e9816bfa15067b398da5e3e +Author: Chris Wilson +Date: Fri Nov 23 14:04:51 2012 +0000 + + sna/gen4: Reduce the flush before performing the CA pass + + Signed-off-by: Chris Wilson + +commit 43aff6708fe97aa2fae0e30f98fc7cd9d7311b75 +Author: Chris Wilson +Date: Fri Nov 23 13:37:44 2012 +0000 + + sna/gen4: Update render fill routines to use the dummy mask + + Signed-off-by: Chris Wilson + +commit 352910712266202ef017066891ec383fd037fc4a +Author: Chris Wilson +Date: Fri Nov 23 13:29:01 2012 +0000 + + sna/gen4: Move the flush from inside the spans to emit_state() + + Signed-off-by: Chris Wilson + +commit 217f3e835b99002669999f818afa0d5c3a1cc852 +Author: Chris Wilson +Date: Fri Nov 23 12:32:14 2012 +0000 + + sna/gen4: Backport the more efficient composite box emitters + + Now that we aren't flushing after every single rectangle, we can strive + for a little efficiency. + + Signed-off-by: Chris Wilson + +commit d3145e3f8146e7d864d32aec49c44c04d619e56a +Author: Chris Wilson +Date: Fri Nov 23 12:28:21 2012 +0000 + + sna/gen4: Use a dummy white mask to avoid the flush w/a when compositing + + Signed-off-by: Chris Wilson + +commit 65d530b59b957cc5f303ae819baad8075a555ac0 +Author: Chris Wilson +Date: Thu Nov 22 08:18:38 2012 +0000 + + Revert "uxa: Refactor early-exit paths of uxa_try_driver_composite()." + + This reverts commit fa5c573455cf63090dbb6d167d4e5f1cb23daf72 as it + causes a SIGSEGV. + + Reported-by: lu hua + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57389 + +commit d3a49f36395d737698616fe8ba9da7b74cd2d89a +Author: Chris Wilson +Date: Wed Nov 21 18:41:00 2012 +0000 + + sna/gen3+: Clear the render.vbo when replacing it for vertex upload + + As we may trigger a flush and a retire when searching for a vertex + buffer for the new vertices, we need to be careful to decouple the + destroyed vbo in order to avoid a use-after-free when inspecting the + state. + + Signed-off-by: Chris Wilson + +commit 1c57a52a1f46e8401429955d8c96fd5095c9012a +Author: Chris Wilson +Date: Wed Nov 21 18:17:31 2012 +0000 + + sna: Assert that we do not replace a GPU bo with a proxy + + Signed-off-by: Chris Wilson + +commit 8da12a00ee653510e1f1a6fecb28dbb36faa8400 +Author: Chris Wilson +Date: Wed Nov 21 17:28:46 2012 +0000 + + sna: Skip uploading unintialiased pixmap data + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 0696ea4bd601ed823dbded03eaef6f316df2a5e8 +Author: Chris Wilson +Date: Wed Nov 21 17:25:33 2012 +0000 + + sna: Add the missing assertion for !proxy + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit ee72375ecd4f6d6e756bc361fa512b6675309540 +Author: Chris Wilson +Date: Wed Nov 21 17:08:53 2012 +0000 + + sna: Do not migrate uninitialised pixmaps + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 44dad490140d85a4c0dcb916030c36a838670c01 +Author: Chris Wilson +Date: Wed Nov 21 16:22:35 2012 +0000 + + sna: Do not dispose of a shadow pixmap + + Fixes regression from 2249e9edc37811c07e2807d6b4def05585b44c22 + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 9c627a05247690891062a2c0c1c8f7bbc0273104 +Author: Chris Wilson +Date: Wed Nov 21 16:03:02 2012 +0000 + + sna: Remove the kgem_bo_is_mappable refcnt assertion from freed paths + + A few callers of kgem_bo_is_mappable operate on freed bo, and so need to + avoid the assert(bo->refcnt). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit c0c48c7a5aca4d24936efbeaefc7674ada2ef87f +Author: Chris Wilson +Date: Wed Nov 21 14:46:45 2012 +0000 + + sna: Add a few refcnt assertions + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 0884777c33d20dbc329b98ad0db5ffb0df93ac8c +Author: Chris Wilson +Date: Wed Nov 21 14:31:44 2012 +0000 + + sna: Fix bogus assertion from 03fb9ded43 + + Signed-off-by: Chris Wilson + +commit 2249e9edc37811c07e2807d6b4def05585b44c22 +Author: Chris Wilson +Date: Wed Nov 21 13:05:36 2012 +0000 + + sna: Dispose of local copy for render sources + + If we transfer the pixmap to the GPU to use as a render source, presume + that we will not need to then touch the local copy (at least for a + while) and so return that memory to the system. + + Signed-off-by: Chris Wilson + +commit 736bb0f7058bf05ef48cdfe6a30d880de817aff9 +Author: Chris Wilson +Date: Wed Nov 21 12:16:46 2012 +0000 + + sna: Tighten a couple of assertions for damage with use_bo + + Signed-off-by: Chris Wilson + +commit 03fb9ded43f9bf8b73f99d5b3a8dc592fe22b523 +Author: Chris Wilson +Date: Tue Nov 20 21:13:07 2012 +0000 + + sna: Assert that we do not create a proxy with existent GPU damage + + References: http://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 9ab1d1f94e502e5fde87e7c171f3502f8a55f22b +Author: Chris Wilson +Date: Tue Nov 20 18:42:58 2012 +0000 + + sna/dri: Queue a vblank-continuation after flip-completion + + If a vblank request was delayed due to a pending flip, we need to make + sure that we then queue it after that flip or else progress ceases. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56423 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57156 + Signed-off-by: Chris Wilson + +commit 7a7a76b359f73a4c4bcda0d88004f4dd5e94a186 +Author: Chris Wilson +Date: Tue Nov 20 16:05:32 2012 +0000 + + sna/dri: Avoid a NULL dereference inside a DBG + + Signed-off-by: Chris Wilson + +commit fa5c573455cf63090dbb6d167d4e5f1cb23daf72 +Author: Eric Anholt +Date: Sat Nov 17 13:11:13 2012 -0800 + + uxa: Refactor early-exit paths of uxa_try_driver_composite(). + + Saves 200b of code at -O2. + +commit edefb64d2b1c95b0b678cb222273ab64b2e6db2a +Author: Eric Anholt +Date: Sat Nov 17 13:11:12 2012 -0800 + + uxa: Work around uninitialized-value warning. + + The compiler isn't noticing that localDst only diverges from pDst when + the _copy variables have also been set. + +commit 18b2e2a82724407196001ca853bd83150c66c5bd +Author: Eric Anholt +Date: Sat Nov 17 13:11:10 2012 -0800 + + uxa: Add printf attribute to intel_debug_fallback(). + + Shuts up a bunch of warnings with xorg's shared warning flags, and + should give us more informative warnings in our code. + +commit 2d1e267e662505ca0dd318765464a24739dc5bd8 +Author: Eric Anholt +Date: Sat Nov 17 13:11:09 2012 -0800 + + uxa/dri: Factor out the repeated swap fallback code. + +commit cd2f373da7a14e004c999f9f0efaf88c785d3d3f +Author: Eric Anholt +Date: Sat Nov 17 13:11:08 2012 -0800 + + configure.ac: Fix bad syntax for test calls + +commit b8c01d9bd7ce5656706ebebd16e5a8c5ca0ba487 +Author: Chris Wilson +Date: Mon Nov 19 15:20:10 2012 +0000 + + sna/dri: Add an assert that the cached DRI2 buffer is pinned for DRI + + Signed-off-by: Chris Wilson + +commit 84b1a02fa9fde02366e0384044526982e70d0e8d +Author: Chris Wilson +Date: Mon Nov 19 13:41:28 2012 +0000 + + sna/dri: Avoid setting off-delay after a failed flip (use-after-free) + + Signed-off-by: Chris Wilson + +commit b4dd1103a55406bcd65f137c668701074a5c41b6 +Author: Chris Wilson +Date: Sun Nov 18 12:21:49 2012 +0000 + + sna/gen6+: Tweak prefer-blt to offset latency when in rc6 + + Signed-off-by: Chris Wilson + +commit 0cb8544dc16d4c1e9ae7f1ee74ee26c7501a9ed7 +Author: Chris Wilson +Date: Sun Nov 18 12:13:46 2012 +0000 + + Remove useless indirection of intel_chipsets + + Once upon a time this was used to hide a compiler warning about a + pointer mismatch, now the compiler still warns about the cast, making + the indirect moot. + + Signed-off-by: Chris Wilson + +commit 8509e474f57533fc6afcf213165f4c8633631fb5 +Author: Chris Wilson +Date: Fri Nov 16 23:02:44 2012 +0000 + + sna/dri: Clear the last-used-cpu flag when performing CopyRegion + + Keeps the internal bookkeeping intact after the small bypass. + + Signed-off-by: Chris Wilson + +commit 866ed4a26cbbb29ef3845b0aa56383c4d951c65a +Author: Chris Wilson +Date: Thu Nov 15 15:13:14 2012 +0000 + + sna/dri: Add a couple of more asserts to track injection of a rogue bo + + Signed-off-by: Chris Wilson + +commit d2897cb0136ffec83365c7530ed544b562cac478 +Author: Chris Wilson +Date: Tue Nov 13 12:43:44 2012 +0000 + + sna/gen4,5: Fix the opacity shader to use the right vertex attribute + + Reported-by: Edward Sheldrake + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57054 + Signed-off-by: Chris Wilson + +commit 440eaa049756e5266f3bd80e2751f1fd0d5f9890 +Author: Chris Wilson +Date: Tue Nov 13 12:42:58 2012 +0000 + + sna/gen4: Tidy emission of opacity vertex attribute + + Just make it more consistent between the various emitters + + Signed-off-by: Chris Wilson + +commit b6d2bb961517623d46aa6944307cb998ee125459 +Author: Chris Wilson +Date: Tue Nov 13 10:05:56 2012 +0000 + + sna/gen4: Do not prefer inplace non-rectilinear spans + + As gen4 requires the per-rectangle vertex flush, emitting spans on the + GPU is inefficient and so we prefer to composite the mask instead. + + Signed-off-by: Chris Wilson + +commit ae293609c7400cd3c753ed3762772264c4741df5 +Author: Chris Wilson +Date: Tue Nov 13 10:21:29 2012 +0000 + + sna/gen4: Always initialise redirect + + Do not assume the caller cleared the composite-op structure for us. + + Signed-off-by: Chris Wilson + +commit 2954f15e2bcb590a90c2cb6077c0843ee25a4413 +Author: Chris Wilson +Date: Tue Nov 13 09:46:19 2012 +0000 + + sna: Specialise the decision for inplace xor uploads + + Fixes a regression from + + commit 0be1d964713ca407f029278a8256d02d925dc9da + Author: Chris Wilson + Date: Tue Sep 11 21:48:24 2012 +0100 + + sna: Use inplace X tiling for LLC uploads + + which introduced the ability to swizzle into CPU maps, but also + convinced the xorg path to the same - which for large images blows up. + + Reported-by: Michael Laß + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57031 + Signed-off-by: Chris Wilson + +commit 66eb0adffa63ef8ece7621ba90dc96af91549612 +Author: Chris Wilson +Date: Mon Nov 12 14:45:56 2012 +0000 + + sna/dri: Apply the can_blit() check for CopyRegion + + CopyRegion() also needs to check for stale bo in case the pixmap + dimensions have changed size and so may cause out-of-bounds read/writes. + + Signed-off-by: Chris Wilson + +commit b27ecf3059bc066ef59f2a71c1d8d8f0ffec7191 +Author: Chris Wilson +Date: Mon Nov 12 14:06:06 2012 +0000 + + sna/dri: Prevent scheduling a swap on stale buffers + + If the screen has been reconfigured and the DRI client tries to swap the + old buffers (having not processed the invalidate event and retrieved the + current names), quietly drop the request. If we try to obey the request, + we will end up attaching a back buffer that is the wrong size to the + scanout... + + Signed-off-by: Chris Wilson + +commit 34aa1e3b2702a55799a5655a3ba10bce4cc2065a +Author: Chris Wilson +Date: Mon Nov 12 11:22:53 2012 +0000 + + sna: Compile against ancient libdrm + + We need to trim the sprite video overlays if the prototypes are not + known. + + Signed-off-by: Chris Wilson + +commit 8f1afde57dca27e6542b0b8e7c87750f3d6367bf +Author: Chris Wilson +Date: Sun Nov 11 16:16:20 2012 +0000 + + 2.20.13 release + + Signed-off-by: Chris Wilson + +commit b16219a19f48b52dda91f26fcbbbbeda056589ab +Author: Chris Wilson +Date: Sun Nov 11 11:05:35 2012 +0000 + + sna: Filter out the full-damage marker when undoing redirection + + ==25902== Invalid read of size 4 + ==25902== at 0x4980E13: _list_del (intel_list.h:218) + ==25902== by 0x4980EAB: list_del (intel_list.h:240) + ==25902== by 0x4981F4B: free_list (sna_damage.c:403) + ==25902== by 0x4985131: __sna_damage_destroy (sna_damage.c:1467) + ==25902== by 0x49A5276: sna_render_composite_redirect_done (sna_render.c:1921) + ==25902== by 0x49C68FC: gen2_render_composite_done (gen2_render.c:1136) + ==25902== by 0x497F90F: sna_composite (sna_composite.c:567) + ==25902== by 0x4994725: glyphs_via_mask (sna_glyphs.c:1139) + ==25902== by 0x4995FB7: sna_glyphs (sna_glyphs.c:1688) + ==25902== by 0x8150EB4: ??? (in /usr/bin/Xorg) + ==25902== by 0x813CA38: CompositeGlyphs (in /usr/bin/Xorg) + ==25902== by 0x8146DE1: ??? (in /usr/bin/Xorg) + ==25902== Address 0x7c079ac2 is not stack'd, malloc'd or (recently) free'd + + Reported-by: bonbons67@internet.lu + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56785 + Signed-off-by: Chris Wilson + +commit 69acbb77e8aad3370d5e8d9a9e067c54872d7082 +Author: Chris Wilson +Date: Sun Nov 11 10:49:59 2012 +0000 + + sna: Fix printing of uninitialied value in DBG + + ==25902== Use of uninitialised value of size 4 + ==25902== at 0x423098E: _itoa_word (_itoa.c:196) + ==25902== by 0x4233F7F: vfprintf (vfprintf.c:1602) + ==25902== by 0x42FAFAD: __vsnprintf_chk (vsnprintf_chk.c:65) + ==25902== by 0x81DBE8E: Xvscnprintf (in /usr/bin/Xorg) + ==25902== by 0x81DC8FB: LogVMessageVerb (in /usr/bin/Xorg) + ==25902== by 0x81DCA62: LogVWrite (in /usr/bin/Xorg) + ==25902== by 0x81DCA9B: VErrorF (in /usr/bin/Xorg) + ==25902== by 0x81DC333: ErrorF (in /usr/bin/Xorg) + ==25902== by 0x49B2FA8: trapezoid_span_inplace__x8r8g8b8 (sna_trapezoids.c:5069) + ==25902== by 0x49B3407: trapezoid_span_inplace (sna_trapezoids.c:5166) + ==25902== by 0x49B4C96: sna_composite_trapezoids (sna_trapezoids.c:5619) + + Reported-by: bonbons67@internet.lu + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56785 + Signed-off-by: Chris Wilson + +commit 66e4c8ff40ab8cf722efa4293bb17b0d8f2dfa88 +Author: Chris Wilson +Date: Sun Nov 11 09:40:09 2012 +0000 + + sna: Flush pending rendering before enabling an output + + This is to prevent falling in the trap of the rendering being delayed + until the next client renders some new content. + + Signed-off-by: Chris Wilson + +commit 94dd0b9ee9f55e7c09b8c0ee18939fa69ce66da2 +Author: Chris Wilson +Date: Sat Nov 10 16:52:09 2012 +0000 + + sna/gen2: Fix use of uninitialised redirection + + ==29553== Invalid read of size 4 + ==29553== at 0x4980E1B: _list_del (intel_list.h:218) + ==29553== by 0x4980EB3: list_del (intel_list.h:240) + ==29553== by 0x4981F53: free_list (sna_damage.c:403) + ==29553== by 0x4985139: __sna_damage_destroy (sna_damage.c:1467) + ==29553== by 0x49A527E: sna_render_composite_redirect_done (sna_render.c:1921) + ==29553== by 0x49C6904: gen2_render_composite_done (gen2_render.c:1136) + ==29553== by 0x497F917: sna_composite (sna_composite.c:567) + ==29553== by 0x8150C41: ??? (in /usr/bin/Xorg) + ==29553== by 0x8142F13: CompositePicture (in /usr/bin/Xorg) + ==29553== by 0x8145F58: ??? (in /usr/bin/Xorg) + ==29553== by 0x81436F2: ??? (in /usr/bin/Xorg) + ==29553== by 0x807965C: ??? (in /usr/bin/Xorg) + ==29553== Address 0x9407e188 is not stack'd, malloc'd or (recently) free'd + + Reported-by: bonbons67@internet.lu + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56785 + Signed-off-by: Chris Wilson + +commit 0f1c30818c9d782b066147448bbcc9ac95ac834f +Author: Chris Wilson +Date: Sat Nov 10 16:52:09 2012 +0000 + + sna: Fix use of uninitialised value in DBG + + ==29553== Use of uninitialised value of size 4 + ==29553== at 0x4230964: _itoa_word (_itoa.c:195) + ==29553== by 0x4233F7F: vfprintf (vfprintf.c:1602) + ==29553== by 0x42FAFAD: __vsnprintf_chk (vsnprintf_chk.c:65) + ==29553== by 0x81DBE8E: Xvscnprintf (in /usr/bin/Xorg) + ==29553== by 0x81DC8FB: LogVMessageVerb (in /usr/bin/Xorg) + ==29553== by 0x81DCA62: LogVWrite (in /usr/bin/Xorg) + ==29553== by 0x81DCA9B: VErrorF (in /usr/bin/Xorg) + ==29553== by 0x81DC333: ErrorF (in /usr/bin/Xorg) + ==29553== by 0x49434F0: kgem_create_buffer (kgem.c:4887) + ==29553== by 0x4943B09: kgem_create_buffer_2d (kgem.c:4969) + ==29553== by 0x4943E19: kgem_upload_source_image (kgem.c:5021) + ==29553== by 0x49A0567: upload (sna_render.c:505) + ==29553== + + Reported-by: bonbons67@internet.lu + References: https://bugs.freedesktop.org/show_bug.cgi?id=56785 + Signed-off-by: Chris Wilson + +commit cc2b13c9c05e57dc5004d93b56f332ea95f0a4ef +Author: Chris Wilson +Date: Sat Nov 10 11:50:15 2012 +0000 + + sna: Specify read/write domains for no-relocation fastpath + + On review (read triggering BUGs), we do need to supply the domain tracking + of the buffers that is being replaced from the relocation path. + + Signed-off-by: Chris Wilson + +commit 0c4a2bcc3d63ecc02e3a940e38e9a416b51ad0c8 +Author: Chris Wilson +Date: Sat Nov 10 12:34:52 2012 +0000 + + sna: Allow snooped buffers to be retained (and reused) between batches + + Signed-off-by: Chris Wilson + +commit f5d79b202dd448e61ab6ffce26fe9cbf9051d770 +Author: Chris Wilson +Date: Sat Nov 10 10:30:04 2012 +0000 + + sna/gen2: Add a modicum of fallback DBG + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56785 + Signed-off-by: Chris Wilson + +commit 27327633138dce159ca2e91fe5eac1565bd45e1c +Author: Chris Wilson +Date: Fri Nov 9 17:08:01 2012 +0000 + + sna/gen4: Only 965gm suffers the !snoop restriction + + So fixup the bogus assertion for g4x + + Signed-off-by: Chris Wilson + +commit 8d3b5ea135fd8f16da2cbfb98041e32c7001a38f +Author: Chris Wilson +Date: Fri Nov 9 15:31:03 2012 +0000 + + xvmc: Use DRMINTEL_LIBS instead of hardcoding -ldrm_intel + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit f040b97b01495aa43f7771ebb8ca5c0d44038bc1 +Author: Chris Wilson +Date: Thu Nov 8 23:42:10 2012 +0000 + + sna: Mark no-reloc write buffers + + If we bypass the relocation processing, we also then bypass the + pending-write analysis, so we need to supply those to the kernel + ourselves (to maintain gpu-cpu coherency). + + Signed-off-by: Chris Wilson + +commit 85ba7e96268dbb8da4bb34078333695a451c6570 +Author: Chris Wilson +Date: Thu Nov 8 15:56:13 2012 +0000 + + sna: Experiment with using reloc.handle as an index into the execbuffer + + Signed-off-by: Chris Wilson + +commit 93d8dddbb92431d6e2c48a17b71cac9f7047902e +Author: Chris Wilson +Date: Thu Nov 8 09:41:21 2012 +0000 + + sna: Set the known offset for the batch as well + + Signed-off-by: Chris Wilson + +commit 120fa0ef8d04f5e82e5f7a0636033d3d96efa1e8 +Author: Chris Wilson +Date: Wed Nov 7 17:41:20 2012 +0000 + + sna: Support a fast no relocation changed path + + x11perf -copywinwin10 on gm45 with c2d L9400: + before: 553,000 op/s + after: 565,000 op/s + + Signed-off-by: Chris Wilson + +commit b7d2fcf47a9569d0944097a8be60ca3be72b42f6 +Author: Chris Wilson +Date: Thu Nov 8 08:55:25 2012 +0000 + + Remove reliance on hard-coded DRI name + + This provides for using the existing DDX with future DRI drivers which + may break from the traditional names - but only with the help of the + user/packager. This scheme needs to be replaced with a robust mechanism + for driver loading if AIGLX and co are to be kept. + + Signed-off-by: Chris Wilson + +commit cefce9c81585b73db7620e08fcf60c89a8204873 +Author: Chris Wilson +Date: Tue Nov 6 17:26:34 2012 +0000 + + sna: Abandon kernels that do not support execbuffer2 + + Signed-off-by: Chris Wilson + +commit b2245838c15b54d72557de8facb7cc15d59624ae +Author: Chris Wilson +Date: Tue Nov 6 16:32:32 2012 +0000 + + sna/gen4: opacity spans requires the per-rectangle flush w/a + + Note that this is worsened, but not caused, by: + + commit e1a63de8991a6586b83c06bcb3369208871cf43d + Author: Chris Wilson + Date: Fri Nov 2 09:10:32 2012 +0000 + + sna/gen4+: Prefer GPU spans if the destination is active + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit a0540ebff083974688c863e08203e3d71a297340 +Author: Chris Wilson +Date: Tue Nov 6 16:00:42 2012 +0000 + + sna/gen4: Remove a couple of old, now redundant, w/a flushes + + Signed-off-by: Chris Wilson + +commit aaaa6c356456a4bab595c6e6485893c538064e37 +Author: Chris Wilson +Date: Tue Nov 6 14:34:51 2012 +0000 + + sna/gen4: Flush after pipelined pointer updates (inverted logic!) + + Signed-off-by: Chris Wilson + +commit 28bda6707d979bca29dbea04e932819de204d920 +Author: Chris Wilson +Date: Mon Nov 5 22:30:29 2012 +0000 + + sna: Prevent use-after-free during partial move-to-gpu + + As we reuse the input parameter 'box' to hold the array of boxes that + need to be migrated, we need to be careful that we do not later confuse + it with the original input parameter. Otherwise, + + ==1315== Invalid read of size 2 + ==1315== at 0x928B091: box_inplace (sna.h:506) + ==1315== by 0x9292278: sna_pixmap_move_area_to_gpu (sna_accel.c:2554) + ==1315== by 0x9292C14: sna_drawable_use_bo (sna_accel.c:2774) + ==1315== by 0x9356C01: gen7_composite_set_target (gen7_render.c:2448) + ==1315== by 0x9357AA2: gen7_render_composite (gen7_render.c:2800) + ==1315== by 0x92DB12E: glyphs_to_dst (sna_glyphs.c:552) + ==1315== by 0x92DEA8D: sna_glyphs (sna_glyphs.c:1664) + ==1315== by 0x4F920E: damageGlyphs (in /tmp/Xorg) + ==1315== by 0x4F2FF6: ProcRenderCompositeGlyphs (in /tmp/Xorg) + ==1315== by 0x437260: Dispatch (in /tmp/Xorg) + ==1315== by 0x426466: main (in /tmp/Xorg) + ==1315== Address 0xd637054 is 20 bytes inside a block of size 208,464 free'd + ==1315== at 0x4C2A2FC: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so) + ==1315== by 0x92CCFCD: __sna_damage_destroy (sna_damage.c:1469) + ==1315== by 0x928AD74: sna_damage_destroy (sna_damage.h:284) + ==1315== by 0x9291CB2: sna_pixmap_move_area_to_gpu (sna_accel.c:2470) + ==1315== by 0x9292C14: sna_drawable_use_bo (sna_accel.c:2774) + ==1315== by 0x9356C01: gen7_composite_set_target (gen7_render.c:2448) + ==1315== by 0x9357AA2: gen7_render_composite (gen7_render.c:2800) + ==1315== by 0x92DB12E: glyphs_to_dst (sna_glyphs.c:552) + ==1315== by 0x92DEA8D: sna_glyphs (sna_glyphs.c:1664) + ==1315== by 0x4F920E: damageGlyphs (in /tmp/Xorg) + ==1315== by 0x4F2FF6: ProcRenderCompositeGlyphs (in /tmp/Xorg) + ==1315== by 0x437260: Dispatch (in /tmp/Xorg) + + Reported-by: Matti Ruohonen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56591 + Signed-off-by: Chris Wilson + +commit e62b0cbf958d1ad95e4522973253a1ae5c1a4da9 +Author: Chris Wilson +Date: Fri Nov 2 15:54:20 2012 +0000 + + sna: Add a small delay during startup if another master is still active + + There exists a race with plymouthd that can cause the drm device to + reject us as the rightful master, and so cause X to fail to load. Try + waiting for a couple of seconds for whatever it was to close before + giving in. + + Signed-off-by: Chris Wilson + +commit e1a63de8991a6586b83c06bcb3369208871cf43d +Author: Chris Wilson +Date: Fri Nov 2 09:10:32 2012 +0000 + + sna/gen4+: Prefer GPU spans if the destination is active + + Trying to avoid using the inplace scanline rasteriser for large shapes. + + Signed-off-by: Chris Wilson + +commit 72bcd8f85c98502b13a67d9c606371afe513584c +Author: Chris Wilson +Date: Thu Nov 1 09:30:18 2012 +0000 + + sna: Try to reduce ping-pong migration for intermixed render/legacy code paths + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56591 + Signed-off-by: Chris Wilson + +commit 4e363906a5ef15e1eb0a387cfb6b3445ac185b9d +Author: Chris Wilson +Date: Wed Oct 31 22:58:59 2012 +0000 + + sna: Set a valid box when checking for GPU bo for BLT composite ops + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit b924831e445615b82a53b10e1849720e933eddfe +Author: Chris Wilson +Date: Wed Oct 31 22:55:56 2012 +0000 + + sna: Preserve mode if flushing before a scanline wait + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 678f9586807071bef813bb69d451f14d2fcbcc04 +Author: Chris Wilson +Date: Wed Oct 31 11:26:18 2012 +0000 + + sna: assert that the source is not the GTT mapping when uploading + + Signed-off-by: Chris Wilson + +commit 783b8048a6d1a9fd0a73ebf7768ae17dc0b21900 +Author: Chris Wilson +Date: Wed Oct 31 11:16:09 2012 +0000 + + sna: Prefer to use the GPU for uploads if continuing on the GPU + + Signed-off-by: Chris Wilson + +commit 74c912880c302889f38fe5898c8038a0ba20e5db +Author: Chris Wilson +Date: Wed Oct 31 10:57:54 2012 +0000 + + sna: Fix a typo in a DBG + + Reported-by: Matti Ruohonen + Signed-off-by: Chris Wilson + +commit f48a821aa73cb40a51baafc6cd2b063f1f91d864 +Author: Chris Wilson +Date: Wed Oct 31 10:53:47 2012 +0000 + + sna: Add a few DBG tracepoints to screen init/fini + + Signed-off-by: Chris Wilson + +commit bf81d552c4be039fbcf3272387828b1a8b3fbdb8 +Author: Chris Wilson +Date: Wed Oct 31 08:50:44 2012 +0000 + + sna: Clamp the drawable box to prevent int16 overflow + + And assert that the box is valid when migrating. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56591 + Signed-off-by: Chris Wilson + +commit 31eb704b2ad7c861ec4e61fb9de0e9592fc6d269 +Author: Chris Wilson +Date: Fri Oct 26 13:57:30 2012 +0100 + + sna: Ensure that the trap is clipped if it ends within the boundary pixel + + Reported-and-tested-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56395 + Signed-off-by: Chris Wilson + +commit ef431b2d35c1bf4d77bbcc73688951d22f6aa135 +Author: Chris Wilson +Date: Thu Oct 25 10:15:39 2012 +0100 + + uxa: Drain the DRM event queue before server regeneration + + Adam Jackson notes that what appeared to be my paranoid ramblings in SNA + actually served a purpose - it prevents a server crash following + server regen if an indirect client happened to be running at the time + (e.g. LIBGL_INDIRECT_ALWAYS=1 glxgears). + + Reported-by: Adam Jackson + Signed-off-by: Chris Wilson + +commit efb8ff16491ecfb4d9c0c6a718684310d949d8d3 +Author: Chris Wilson +Date: Wed Oct 24 22:56:20 2012 +0100 + + sna: Add missing ValidatePicture() for flattening alphamaps + + Reported-by: Armands Liepins + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56367 + Signed-off-by: Chris Wilson + +commit 1a489142c8e6a4828348cc9afbd0f430d3b1e2d8 +Author: Chris Wilson +Date: Tue Oct 23 23:43:50 2012 +0100 + + sna: Disable RandR hotplug events if Xinerama is enabled + + Since RandR itself is disabled if Xinerama is enabled, for example with + ZaphodHeads, calling RRGetInfo() upon a hotplug event generates an + assertion. + + Reported-by: Stephen Liang + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55260 + Signed-off-by: Chris Wilson + +commit d87c2756db1af6e4af15864ab0f44d1454079236 +Author: Chris Wilson +Date: Tue Oct 23 15:50:56 2012 +0100 + + sna: Beware 16-bit overflow when computing sample areas + + Reported-by: Ognian Tenchev + References: https://bugs.freedesktop.org/show_bug.cgi?id=56324 + Signed-off-by: Chris Wilson + +commit c7f48684cdebc24128a5fa5678614af3deb14b3b +Author: Chris Wilson +Date: Tue Oct 23 15:17:56 2012 +0100 + + sna: Only disallow hw sprite scaling on Haswell + + Earlier chips (Ironlake, Sandybridge and Ivybridge) have integrated + sprite scalers. + + Signed-off-by: Chris Wilson + +commit 5c3ea9cf6900855502fcd56214a1b9e180265ff5 +Author: Chris Wilson +Date: Mon Oct 22 22:35:17 2012 +0100 + + sna: Update DRI buffer if attached to the framebuffer for TearFree flips + + Signed-off-by: Chris Wilson + +commit 4dfc83359d006a4e410e3280003b49683309afc3 +Author: Chris Wilson +Date: Mon Oct 22 14:56:01 2012 +0100 + + sna: Tidy udev install/remove and add a couple of lines of DBG + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55260 + Signed-off-by: Chris Wilson + +commit 4d9687d49c9869b2e88d408e5f451c9a1f8f3389 +Author: Chris Wilson +Date: Mon Oct 22 13:41:54 2012 +0100 + + sna: Refactor the common code to enable a timer + + Signed-off-by: Chris Wilson + +commit fb729788872ccb429ddde8a9a4281b1933243096 +Author: Chris Wilson +Date: Sun Oct 21 14:36:48 2012 +0100 + + sna: Only query the system time if we are processing timers + + Signed-off-by: Chris Wilson + +commit c0d6a75f02eb97e5c80a4345ae5c68e9a81d49b6 +Author: Chris Wilson +Date: Sun Oct 21 14:32:14 2012 +0100 + + sna: Use the FLUSH_TIMER as the only wakeup timer source + + Signed-off-by: Chris Wilson + +commit 7bc829c39a203c17053eb728412f698a429ad9fe +Author: Chris Wilson +Date: Sun Oct 21 14:24:01 2012 +0100 + + sna: Remove the unused inactive eviction + + Signed-off-by: Chris Wilson + +commit 9fa6e4aa2daee99ff5f6efc11232de22100bac80 +Author: Chris Wilson +Date: Sun Oct 21 12:48:06 2012 +0100 + + intel: Sanity check that the platform probes points to a i915.ko GEM device + + References: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1069031 + Signed-off-by: Chris Wilson + +commit f6eed98fcfea54d50a282ac71ee654645551ae11 +Author: Chris Wilson +Date: Sun Oct 21 10:46:14 2012 +0100 + + sna: Mark the to-be-damaged region first, then Process afterwards + + Damage is processed in two phases, with the actual Damage being appended + before the operation is performed so that a copy can be made before + modification (e.g. software cursors). + + Signed-off-by: Chris Wilson + +commit 60e4e009f90543bfd57f6a4e51ebc5b32b4af33b +Author: Chris Wilson +Date: Sat Oct 20 17:59:45 2012 +0100 + + sna: Move the source region to the CPU for a self-copy fallback CopyArea + + Signed-off-by: Chris Wilson + +commit 7ff8b1ba543508f3b209f2ade7655c3aa34d546d +Author: Chris Wilson +Date: Sat Oct 20 16:23:26 2012 +0100 + + 2.20.12 release + + How embarrassing! My fault for rushing :( + + Signed-off-by: Chris Wilson + +commit 695b2ce2d32bde191080129b55f9bf8a9d48ee77 +Author: Chris Wilson +Date: Sat Oct 20 16:19:21 2012 +0100 + + uxa: Fixup drm_intel_bo_disable_reuse() typo + + Signed-off-by: Chris Wilson + +commit 2083e253b3d1ecc218ab1e523e4026ddd4561112 +Author: Chris Wilson +Date: Sat Oct 20 16:07:11 2012 +0100 + + 2.20.11 release + + Signed-off-by: Chris Wilson + +commit fc0ba65f5efe217f2ab5e920255d2133d7c9e5e8 +Author: Chris Wilson +Date: Sat Oct 20 09:29:10 2012 +0100 + + uxa: Disable bo reuse after binding to a scanout + + On gen6+, bo are expected to be LLC by default. However, as using the bo + for the scanout causes it to be moved into the uncached domain, this + assumption is then false and we should release the bo back to the system + rather than spread the uncached buffers around. The most common + allocator of scanouts is for pageflipping which are already non-reusable + due to the DRI2 export, so there should actually be little impact. + + Signed-off-by: Chris Wilson + +commit f4c32af48b0c92a48131090886a6a6b6c45dbe34 +Author: Chris Wilson +Date: Fri Oct 19 16:29:19 2012 +0100 + + sna: Clear the damage along with the BO when forcing the stall for inplace BLT + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56180 + Signed-off-by: Chris Wilson + +commit 299232bdb69c8c2b6231905e0f45e9cfe74fe09a +Author: Chris Wilson +Date: Fri Oct 19 15:02:00 2012 +0100 + + sna: Reorder final checks for using the BO and setting the damage pointer + + When we return NULL from sna_drawable_use_bo(), the expectation is that + the damage pointer is also NULL. However, one SHM path leaked. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=56180 + Signed-off-by: Chris Wilson + +commit 257abfdabe39629fb458ed65fab11283f7518dc4 +Author: Chris Wilson +Date: Wed Oct 17 23:34:22 2012 +0100 + + sna/gen4: Presume we need a flush upon state change similar to gen5+ + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55627 + References: https://bugs.freedesktop.org/show_bug.cgi?id=55500 + Signed-off-by: Chris Wilson + +commit 8238c672984e31ae655353d6412e3395a9cdfbe6 +Author: Chris Wilson +Date: Wed Oct 17 22:16:29 2012 +0100 + + sna: secure batches accepted upstream, so simply use runtime detection + + Signed-off-by: Chris Wilson + +commit 540666a0a81c7daedbd47830d0932df5e57ec903 +Author: Chris Wilson +Date: Wed Oct 17 16:59:05 2012 +0100 + + sna/overlay: Move bo out of GTT domain after binding to overlay plane + + Signed-off-by: Chris Wilson + +commit 891bae4aa91e85542dcbe38f6ee92141e3efc801 +Author: Chris Wilson +Date: Wed Oct 17 11:29:10 2012 +0100 + + sna: Use the secure batches to program scanline waits on gen6+ + + Signed-off-by: Chris Wilson + +commit 41be80a8cae1eb0e294392e5033511bfdf2895c5 +Author: Chris Wilson +Date: Wed Oct 17 11:25:52 2012 +0100 + + sna: Enable support for SECURE batch buffers + + Signed-off-by: Chris Wilson + +commit ba6c82cd9d8089354b90632ca8edbb35cc09b9c4 +Author: Chris Wilson +Date: Wed Oct 17 13:54:51 2012 +0100 + + sna/dri: Defensively check for GTT mmap failure during fallback + + Signed-off-by: Chris Wilson + +commit 7927f9a351ead1a5593bc91e465706bdd889bb8d +Author: Chris Wilson +Date: Tue Oct 16 17:56:30 2012 +0100 + + sna/gen7: Filter BLEND flags for CA glyphs + + Fixes regression from commit c51aaa731e5cffc892e59730194ad7c98789b02b + Author: Chris Wilson + Date: Thu Oct 11 11:36:00 2012 +0100 + + sna/gen7: Replace bogus state tracking assertion + + The assumption being that we only used the encoded flags for determining + the composite state is false for the magic CA pass. + + Reported-by: Oleksij Rempel + Reported-by: Eyal Lotem + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56037 + Signed-off-by: Chris Wilson + +commit 2ad4aa195571fe214ccffa55e123507f1be66243 +Author: Chris Wilson +Date: Tue Oct 16 11:59:28 2012 +0100 + + sna: Drop fake tiled CPU mapping + + The only path where this is correct already handles it as the special + case that it is, everywhere else it just nonsense. + + Signed-off-by: Chris Wilson + +commit b42d81b63f5b6a571faffaadd42c74adce40128a +Author: Chris Wilson +Date: Sun Oct 14 09:15:38 2012 +0100 + + 2.20.10 release + + Signed-off-by: Chris Wilson + +commit 877e9c57c788cb3d4db1e96e519b26ca5d542465 +Author: Chris Wilson +Date: Fri Oct 12 17:57:28 2012 +0100 + + sna/overlay: Trim suggested BestSize to fit within the overlay constraints + + As the maximum reported image sizes are for the source image, we should + be careful not to recommend the application use an output Window larger + than can be handled by the overlay hardware. So shrink it to fit, whilst + preserving the aspect ratio. + + Signed-off-by: Chris Wilson + +commit 1ec41590c9d142a77a2fdcfcd9a762aca99d9d86 +Author: Paulo Zanoni +Date: Thu Oct 11 18:10:17 2012 -0300 + + Fix possible_clones computation for shared encoders between outputs + + Libdrm's possible_clones is a mask of encoders. Xorg's possible_clones + is a mask of outputs, so we just can't do the following: + + output->possible_clones = kencoder->possible_clones; + + This is a problem on Haswell because, at least with the current + patches floating on the mailing list, there is more than one connector + per encoder. + + This patch writes the code to properly translate libdrm's encoder mask + into Xorg's output mask. + + Signed-off-by: Paulo Zanoni + Signed-off-by: Chris Wilson + +commit 0b92a5a3062d73666279e17ac2d711314bcd8dfe +Author: Chris Wilson +Date: Thu Oct 11 12:16:03 2012 +0100 + + sna: Correct a bogus assertion after inplace PutImage + + If we are forced to use the GPU bo as the target because the CPU bo is + busy, the priv->cpu flag is likely to remain set, so we need to clear it + rather than fail the assertion that is false. + + Signed-off-by: Chris Wilson + +commit c51aaa731e5cffc892e59730194ad7c98789b02b +Author: Chris Wilson +Date: Thu Oct 11 11:36:00 2012 +0100 + + sna/gen7: Replace bogus state tracking assertion + + Signed-off-by: Chris Wilson + +commit a56fa2fb4aad172be905c3abeefd987804553809 +Author: Chris Wilson +Date: Thu Oct 11 10:55:34 2012 +0100 + + sna: Rearrange switch to suppress a compiler warning in sna_copy_plane_blt() + + Hide the impossible default case so that static analyzers are not + confused. + + Signed-off-by: Chris Wilson + +commit 94a98d1c472ce0fc7601421a2bcfbd0524d2bc93 +Author: Chris Wilson +Date: Thu Oct 11 08:42:21 2012 +0100 + + sna: Limit available space for gen2 + + Since pre-g33 chipsets impose massive alignment restrictions on objects + within the aperture we need to further restrict the amount of available + space to be sure we have sufficient room to accommodate the alignment. + + Signed-off-by: Chris Wilson + +commit d3ae85dd01952ecff7b780e30a43571146aa61ea +Author: Chris Wilson +Date: Wed Oct 10 17:27:38 2012 +0100 + + sna: Use high/low watermarks for fenced aperture counting + + This helps with fitting larger operations into the small apertures of + gen2, which due to the lax accounting could trigger ENOSPC. + + Signed-off-by: Chris Wilson + +commit dadffd0061e2b14db397608e3cedfe9c76e546c8 +Author: Dave Airlie +Date: Thu Oct 11 14:30:29 2012 +1000 + + intel: fix fullscreen damage posting on pageflip + + While playing with MPX and sw cursor I noticed page flips won't + end up misrendering some bits, so the sw cursor was replacing the + bits on the wrong pixmap. + + Fix the damage handling to be correct and append damage before swapping + the pointers and process damage after. + + This fixes misrendering with MPX cursors under a fullscreen compositor, + that pageflips. + + Signed-off-by: Dave Airlie + [ickle: The secret is that damage is sometimes reported before the + rendering in DamageRegionAppend, and sometimes afterwards in + DamageRegionProcessPending. For instance, the software cursor operates + prior to being rendered over.] + Signed-off-by: Chris Wilson + +commit a1ea19a3edaac6e1e5d240b75b7c5fdcfea0e0a8 +Author: Chris Wilson +Date: Wed Oct 10 23:20:13 2012 +0100 + + sna: Prevent sign-extension when manipulating strides + + Reported-by: Prit Laes + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55823 + Signed-off-by: Chris Wilson + +commit d73f5b5bb1a81421f1fdc3ac3b460a8ad90be0ad +Author: Chris Wilson +Date: Tue Oct 9 19:41:10 2012 +0100 + + sna/gen6+: Initialize the damage for fill-boxes + + In case we need to redirect the rendering for a large render target, we + need to initialize the damage pointer. + + Reported-by: Clemens Eisserer + Bugzilla: ttps://bugs.freedesktop.org/show_bug.cgi?id=55812 + Signed-off-by: Chris Wilson + +commit ae6ae91baa0574a7a23ab76afac5e2d827c49c20 +Author: Chris Wilson +Date: Tue Oct 9 18:36:59 2012 +0100 + + sna: Check the map exists before trying to release it + + Reported-by: Clemens Eisserer + Bugzilla: ttps://bugs.freedesktop.org/show_bug.cgi?id=55812 + Signed-off-by: Chris Wilson + +commit 8bbfa88a8691f6c1b2903090c3cd3159126ef563 +Author: Chris Wilson +Date: Tue Oct 9 17:26:39 2012 +0100 + + sna: Also check the bg rrop for reads when deciding upon fallback placement + + Reported-and-tested-by: chr.ohm@gmx.net + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55810 + Signed-off-by: Chris Wilson + +commit f8a005d1f984382272ad10cabd88c0422d4e76e8 +Author: Chris Wilson +Date: Tue Oct 9 00:23:24 2012 +0100 + + sna: Pass the region, not its pointer, when moving the GC to the CPU + + Fortunately, the sgc->region was not used along that particular fallback + path. + + Signed-off-by: Chris Wilson + +commit fb5205a86da09b344dbc20598655e917c263125c +Author: Chris Wilson +Date: Mon Oct 8 09:12:33 2012 +0100 + + sna/gen5: Flush pipelined ops when changing state + + When is a pipelined operation, not pipelined? That is the mystery posed + by our hardware! + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + Signed-off-by: Chris Wilson + +commit bed64c998df538046d77eeea90598f48077dab5f +Author: Chris Wilson +Date: Mon Oct 8 00:13:03 2012 +0100 + + sna: Fix check_reloc_and_exec typo + + Garbage xorg includes hiding genuine compiler warnings ftl once again. + + Signed-off-by: Chris Wilson + +commit 2ac3776be85d857a57ce7b742e52cd6091d2befb +Author: Chris Wilson +Date: Sun Oct 7 22:41:25 2012 +0100 + + sna: Check that we have sufficient space for a copy when replacing a fill + + Reported-by: Timo Kamph + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55700 + Signed-off-by: Chris Wilson + +commit 1a5d5b9ae5771d81da16222582acedb1557386c8 +Author: Chris Wilson +Date: Sun Oct 7 22:41:02 2012 +0100 + + sna: Check that for batch overflows after advancing a BLT + + Signed-off-by: Chris Wilson + +commit b41ecda69f2e6c9f8adf79dd24ded45740bcc015 +Author: Chris Wilson +Date: Sun Oct 7 22:39:36 2012 +0100 + + sna: Only reduce the maximum batch size for old kernels + + Be careful we not increase the batch size to span multiple pages on 865g! + + Signed-off-by: Chris Wilson + +commit 3ca7f8be5bcfec3c50c43bd485f0c57b931f8206 +Author: Chris Wilson +Date: Sun Oct 7 22:39:10 2012 +0100 + + sna/gen2: Count the number of dwords required for the invariant + + Signed-off-by: Chris Wilson + +commit 4d2dba0ba70c2b217a777243e8a89f7a5c5349a9 +Author: Chris Wilson +Date: Sun Oct 7 10:46:19 2012 +0100 + + Use path for intel-gen4asm derived from pkg-config + + As we use pkg-config to determine whether to use intel-gen4asm, we + should also use it to locate the right version of intel-gen4asm to use. + This allows the user to install the assembler in a non-standard path for + cross-builds and similar. + + Reported-by: Josh Tripplet + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55646 + Signed-off-by: Chris Wilson + +commit 249051d90fb0ab0bea5561a04ee2a5d0a2238ff1 +Author: Chris Wilson +Date: Sun Oct 7 09:33:06 2012 +0100 + + sna/gen2: And the other compile failure + + Typing on Sunday before coffee is a very bad idea. + + Signed-off-by: Chris Wilson + +commit d11a15f04dfaf8ba236d7255c52e67d8602ab806 +Author: Chris Wilson +Date: Sun Oct 7 09:30:38 2012 +0100 + + sna/gen2: Compile fix + + Be careful when cutting and pasting assertions! + + Signed-off-by: Chris Wilson + +commit d2a26adc8e7b02aea204101f207f740bbde62414 +Author: Chris Wilson +Date: Sun Oct 7 08:59:32 2012 +0100 + + sna/gen2: Add a couple of assertions to track down a batch overflow + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55700 + Signed-off-by: Chris Wilson + +commit 3680aa4976407886eb4be9878d5296d5a1fadccf +Author: Chris Wilson +Date: Fri Oct 5 12:33:32 2012 +0100 + + sna: Do not create an unsnooped CPU mapping for readbacks + + Otherwise we notice that we have a CPU mmap during read synchronized and + presume that we need not take any further action. However... + + Signed-off-by: Chris Wilson + +commit d717a67ff4a59d0c2cc108cedbecdc20b4c9fb97 +Author: Chris Wilson +Date: Fri Oct 5 10:27:26 2012 +0100 + + configure: Make rebuilding of the gen4 assembly files explicit + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55646 + Signed-off-by: Chris Wilson + +commit 5b74a2dc5270094810ec0cf8039fd3b3ab0815b5 +Author: Josh Triplett +Date: Thu Oct 4 17:48:24 2012 -0700 + + Fix out-of-tree builds with intel-gen4asm installed + + The make rules to compile shaders with intel-gen4asm referenced the .g4a + source files without using $(srcdir), which broke out-of-tree builds. + Reference .g4a source files via $(srcdir), and add $(srcdir) to m4's + include path, fixing out-of-tree builds. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55645 + Signed-off-by: Josh Triplett + +commit 07a46333477898cfc2020ba5da9a6a7a866b21a7 +Author: Chris Wilson +Date: Fri Oct 5 10:17:45 2012 +0100 + + sna: Refactor the fallback CopyArea to use the common region computation + + Signed-off-by: Chris Wilson + +commit 3ad3a2d839f8e2f5b02f883e2b4131d4c0901fb0 +Author: Chris Wilson +Date: Thu Oct 4 15:14:08 2012 +0100 + + sna/gen2: Tidy DBG code for disabling composite operations + + Signed-off-by: Chris Wilson + +commit 6054f8e1120d499f70e7bd4809b3fc6994792bcb +Author: Chris Wilson +Date: Thu Oct 4 14:40:59 2012 +0100 + + sna: Remove another sna_pixmap->cpu assertion that was not true + + Signed-off-by: Chris Wilson + +commit acf354d7fb575c468e86a5935cad095015ccadb1 +Author: Chris Wilson +Date: Thu Oct 4 14:35:14 2012 +0100 + + sna: Propagate failures from compositing glyph masks + + So that we can fallback correctly. This is primarily using for debugging + failure paths... + + Signed-off-by: Chris Wilson + +commit c7ad655359b746917deeac3efb9eb843465cf4b9 +Author: Chris Wilson +Date: Thu Oct 4 13:52:55 2012 +0100 + + sna/gen2: Prevent using the GTT maps with I915_TILING_Y on 855gm + + Signed-off-by: Chris Wilson + +commit 0a2c5eb7669c249194b41d624ca05654a8d7035b +Author: Chris Wilson +Date: Thu Oct 4 13:51:23 2012 +0100 + + sna: Once again look into assertions around sna_pixmap->cpu + + Revert back to basics, and clear the CPU flag everytime we use the GPU, + rather than try to avoid clearing it along some paths. + + Signed-off-by: Chris Wilson + +commit 4d3b849c57d78f0447334c5c0871d8bd78e0af24 +Author: Chris Wilson +Date: Thu Oct 4 12:14:47 2012 +0100 + + sna: Avoid using the gpu for uploads whilst wedged + + Signed-off-by: Chris Wilson + +commit 4608e482615d4b4599608c7bc17ac8a9f9293840 +Author: Chris Wilson +Date: Thu Oct 4 11:23:36 2012 +0100 + + sna/gen2: Allow fine damage tracking for render operations + + Signed-off-by: Chris Wilson + +commit 83b8669abc7415202f9e0c764de675ffbcf45dac +Author: Chris Wilson +Date: Wed Oct 3 23:45:28 2012 +0100 + + sna/gen2: Setup invariant blend arguments + + I thought these were completely specified via the LOAD_STATE_IMMEDIATE + commands we used whilst seting up the render pipeline. I was wrong. + + Reported-by: Timo Kamph + References: https://bugs.freedesktop.org/show_bug.cgi?id=55455 + Signed-off-by: Chris Wilson + +commit b71af5dc626adfdf7d753e8e61fb13e8b9290d17 +Author: Chris Wilson +Date: Wed Oct 3 22:53:57 2012 +0100 + + sna: Clear sna_pixmap->cpu when destroying the CPU damage + + So that we keep the assertion checks that without CPU damage we can not + be on the cpu. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55591 + Signed-off-by: Chris Wilson + +commit 0d42872d1e0bab1808c0a544c7ece049da103825 +Author: Chris Wilson +Date: Wed Oct 3 14:42:19 2012 +0100 + + sna: Protect against undefined O_CLOEXEC + + Reported-by: Giovanni Mariani + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55577 + Signed-off-by: Chris Wilson + +commit a683643ebf9120bd73a7cd740b5fb24f7e8e797b +Author: Chris Wilson +Date: Wed Oct 3 14:13:13 2012 +0100 + + sna: Fix an instance of undamaged tracking + + Signed-off-by: Chris Wilson + +commit 47c76bb9680eee89d1cef86058782a7073ca4a47 +Author: Chris Wilson +Date: Wed Oct 3 14:12:50 2012 +0100 + + sna/gen7: Tidy detection of unbounded render op + + Signed-off-by: Chris Wilson + +commit 3e770f09dbe76287293fea0a8a1f231885aa1c1f +Author: Chris Wilson +Date: Wed Oct 3 13:00:25 2012 +0100 + + sna/dri: Delay the deactivation of the pageflipping + + As we need to clflush the scanout buffer as we return it to the bo cache + on SNB+, it is costly to terminate the pageflipping as soon as we drop a + frame as mesa often fails to keep up to the vrefresh rate. + + Signed-off-by: Chris Wilson + +commit b3a502a7057649b284601bdd5110b136ab1f5fbb +Author: Chris Wilson +Date: Wed Oct 3 11:46:57 2012 +0100 + + sna: Review sna_pixmap->cpu tracking + + Notably 52b211cb15b3 was triggering a few assertions. + + Signed-off-by: Chris Wilson + +commit bf44d9965b5cc0f0ee31ba2579783d8194fff756 +Author: Chris Wilson +Date: Tue Oct 2 12:22:51 2012 +0100 + + sna: Prevent sna_damage_contains_box__no_reduce() from a NULL deref + + Signed-off-by: Chris Wilson + +commit 0ae6c2ccb006a99e8d7bbfff77f98cc58f62ce2f +Author: Chris Wilson +Date: Tue Oct 2 11:44:16 2012 +0100 + + sna: Actually upload the damage when replacing a busy CPU bo for PutImage + + Reported-by: Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55508 + Signed-off-by: Chris Wilson + +commit 52b211cb15b3bfe33a61cafcd8dcc1c9fbf20243 +Author: Chris Wilson +Date: Mon Oct 1 23:55:37 2012 +0100 + + sna: Tweak CPU damage partial upload paths + + Signed-off-by: Chris Wilson + +commit 1fc3fa699c0b4cae5259d9e439f84ede4a6012b2 +Author: Chris Wilson +Date: Mon Oct 1 22:42:26 2012 +0100 + + sna: Avoid accumulating damage to the CPU if it is already damaged + + Signed-off-by: Chris Wilson + +commit 8c2821d77c4b3bdd4d40d4a2c69f935a9eb0fd47 +Author: Chris Wilson +Date: Tue Oct 2 11:31:40 2012 +0100 + + sna: Remember to call ValidatePicture() before using newly created Pictures + + Reported-by: Marco De Michele + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55527 + Signed-off-by: Chris Wilson + +commit 51202798862c79ad417936cfe2d1847b1da4ab87 +Author: Chris Wilson +Date: Mon Oct 1 13:06:42 2012 +0100 + + uxa: Remove USE_GLAMOR check from unrealize glyph caches + + In an interesting twist during teardown, the driver info structure is + freed long before the caches. However, the glyph cache teardown was + checking to see if glamor was enabled to see if it could skip the + teardown. In fact, since we won't have created the glyph caches in that + circumstances it was safe any way. + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit ba1dea5e373b8d7b410c07df897acc4d11079f63 +Author: Chris Wilson +Date: Mon Oct 1 11:19:41 2012 +0100 + + sna/gen2: Clear STIPPLE setup before rendering with the 3D pipeline + + One over-zealous removal too many. + + Reported-by: Timo Kamph + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55455 + Signed-off-by: Chris Wilson + +commit eec12faf82370a8540114287c224953aa66d7bd9 +Author: Chris Wilson +Date: Sun Sep 30 18:39:06 2012 +0100 + + sna/dri: Check back/front buffers of a pixmap for format change + + Highly unlikely. + + Signed-off-by: Chris Wilson + +commit 8e23251aad6d56a59e626b623e59bafac3143562 +Author: Chris Wilson +Date: Sun Sep 30 13:52:34 2012 +0100 + + sna: Cache repeated use of the temporary CPU mapping for tiled_x uploads + + Fixes ShmPutImage regression under gnome-shell + + Signed-off-by: Chris Wilson + +commit 1756cf4d8e80cea47a28786c51cac4a760d6d0cf +Author: Chris Wilson +Date: Sun Sep 30 12:26:23 2012 +0100 + + sna/dri: Only chain to a triple buffer pageflip sequence + + Signed-off-by: Chris Wilson + +commit ba525463fb91900e775c91a54368a9e8b270268b +Author: Chris Wilson +Date: Sun Sep 30 09:03:36 2012 +0100 + + sna/dri: Improve handling of async/sync pageflip transition + + Signed-off-by: Chris Wilson + +commit 2eab5ef751d7e9caabd7df171cdbb5e784059998 +Author: Chris Wilson +Date: Sun Sep 30 08:49:34 2012 +0100 + + sna: Make sure the CPU bo is destroyed if we fail to mmap it during alloc + + Signed-off-by: Chris Wilson + +commit 45b351412b8ba81f4fef2f64540d87cbf16359fd +Author: Chris Wilson +Date: Sat Sep 29 21:21:18 2012 +0100 + + sna: set_cacheing returns a bool not an error-code + + Signed-off-by: Chris Wilson + +commit 33f6f753788398efdf20cde4aa0b4ca402eee8fe +Author: Chris Wilson +Date: Sat Sep 29 16:41:00 2012 +0100 + + sna/dri: Swallow error from GetMSC + + Just ignore the error return from WaitVBlank and make up a value for + last MSC/SBC similar to an unattached Drawable. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55395 + Signed-off-by: Chris Wilson + +commit a873f6d354ebbc52265e686b614027f537a6363a +Author: Chris Wilson +Date: Sat Sep 29 16:01:58 2012 +0100 + + sna: Release the front buffer and drop DRM master early during shutdown + + If we delay the dropping of DRM master we may complete a VT switch + before we are ready and so prevent a second X server from reacquiring + master, and dying. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55446 + Signed-off-by: Chris Wilson + +commit a192f8cbc238d84e058b01b7682abe7ef09d3508 +Author: Chris Wilson +Date: Sat Sep 29 10:51:00 2012 +0100 + + 2.20.9 release + + Signed-off-by: Chris Wilson + +commit 16860d448f11ba405050bd1ff02dc63a4b26280c +Author: Chris Wilson +Date: Sat Sep 29 10:40:51 2012 +0100 + + uxa: Only destroy the bufmgr if it exists + + Be wary in case the Screen is destroy before we initialise bufmgr. + + Signed-off-by: Chris Wilson + +commit 13f7a9e267fbefd3326569e89b840bef31d77996 +Author: Chris Wilson +Date: Fri Sep 28 09:25:12 2012 +0100 + + sna: Restore LLC cache level after using a buffer for scanout (uncached) + + Signed-off-by: Chris Wilson + +commit 8bfd31e9bb13bcb7f12e4147bec0da87b8e87dde +Author: Chris Wilson +Date: Thu Sep 27 18:12:11 2012 +0100 + + sna/dri: Improve handling of flipping with no outputs + + Signed-off-by: Chris Wilson + +commit dddb6e4e63d5cc8b2a1f2ae3ff287922d30460b9 +Author: Chris Wilson +Date: Thu Sep 27 17:17:30 2012 +0100 + + sna: Attempt to restore the current mode if pipe is disabled on DPMS on + + If we attempt to power up the pipe through a DPMS request, but it was + previously disabled due to an error, first try re-enabling. + + Signed-off-by: Chris Wilson + +commit 88cfd23379950d1fe4e682519c48ef6e3091c2f3 +Author: Chris Wilson +Date: Thu Sep 27 16:16:39 2012 +0100 + + uxa: Update mode->fb_id after completing pageflips + + As intel_crtc_on() depends upon the current value for determining if the + pipe is active, we can only change the value afterwards. + + Signed-off-by: Chris Wilson + +commit 83990c649cbd3cb563d08f04e1c02232c44997aa +Author: Chris Wilson +Date: Thu Sep 27 14:58:26 2012 +0100 + + Remove the last couple of references to mibstore + + Signed-off-by: Chris Wilson + +commit cb0b72c4fbb7b1bc941522d8679fef856f2f8936 +Author: Chris Wilson +Date: Thu Sep 27 14:53:46 2012 +0100 + + uxa: Fixup the last couple of commits after realising I didn't have uxa enabled + + Signed-off-by: Chris Wilson + +commit feef53005b57d6b4489a15f8d0db8245dcb0cfaa +Author: Chris Wilson +Date: Thu Sep 27 13:36:55 2012 +0100 + + uxa: Do not attempt to pageflip whilst not master + + Signed-off-by: Chris Wilson + +commit 5a45cbacb777e478d8fbda9223b0fb5c705d7249 +Author: Chris Wilson +Date: Thu Sep 27 13:31:27 2012 +0100 + + uxa: Confirm the pipe is alive before flipping + + Signed-off-by: Chris Wilson + +commit edc5b7f741a4bb8e9a58b5eb2201fa9304f94ef7 +Author: Chris Wilson +Date: Thu Sep 27 13:27:20 2012 +0100 + + uxa/dri: Confirm Drawable is still attached to an active pipe before flipping + + If we schedule a flip to happen on a far distant vblank, it is possible + for us to disable the pipes with a modeset, whilst maintaining the fb + size, or with a DPMS command. If the pipe is disabled and we still try + to flip, then we trigger an EINVAL error from the kernel. + + Signed-off-by: Chris Wilson + +commit eb667378543f97d7c7e7767daddbd9b39e07c1f8 +Author: Chris Wilson +Date: Wed Sep 26 15:12:57 2012 +0100 + + sna: Typo in DBG + + Signed-off-by: Chris Wilson + +commit 557ad78d02dfff3db9e7fc21f05230a8fe482f7c +Author: Chris Wilson +Date: Wed Sep 26 15:02:17 2012 +0100 + + Kill mibstore pretend backwards compatibility + + Adam Jackson was kind enough to point out that mibstore had been a no-op + since xorg-1.4 and the earliest we claim to support is xorg-1.6. + + Signed-off-by: Chris Wilson + +commit 367f57faf2c422da026a25c099426dc750cf3759 +Author: Chris Wilson +Date: Wed Sep 26 14:06:18 2012 +0100 + + sna/video: Force integer promotion to avoid u16 overflow for frame size + + Signed-off-by: Chris Wilson + +commit 34772cb0e724a880a8c6db936c0bb5dd129398f2 +Author: Chris Wilson +Date: Wed Sep 26 12:09:39 2012 +0100 + + sna/dri: Handle pending flips when drawable disappears. + + The async case needs special handling as the current front buffer may be + pending a flip onto the scanout which needs to be completed even if the + Drawable is destroyed. + + Fixes regression from commit ad877abdc70b842afd202b2f97892d97a0b8d151 + Author: Chris Wilson + Date: Sat Jul 7 17:48:52 2012 +0100 + + sna/dri: Attach the chain of frame events to the Window, not pixmap + + Signed-off-by: Chris Wilson + +commit addfa653cf51fa45c7eae49be1fd722aaadf97d6 +Author: Chris Wilson +Date: Wed Sep 26 08:59:18 2012 +0100 + + uxa: Prevent attempting to call intel_mode_fini() before PreInit runs + + In the Ubuntu xserver it is apparently possible for the Screen to be + deleted prior to being fully initialised. Make sure we don't crash in + that situation! + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55346 + Signed-off-by: Chris Wilson + +commit b880d8e0a9a32acd50333f72d695268c4819c29e +Author: Chris Wilson +Date: Tue Sep 25 16:59:20 2012 +0100 + + sna/gen5: Add WA reference + + Signed-off-by: Chris Wilson + +commit 74f930fd80c3f97a1b6213e9e79e02f8f51c64b9 +Author: Chris Wilson +Date: Tue Sep 25 15:41:51 2012 +0100 + + sna: Make sure the batch is flushed before setting DPMS + + Just in case on the off-chance that the kernel modifies the pipe and we + had a pipe-dependent operation in the batch. + + Signed-off-by: Chris Wilson + +commit 0a00c3765c3ba464bb4e9cde12e964c979421ed6 +Author: Chris Wilson +Date: Tue Sep 25 13:50:33 2012 +0100 + + sna: Accommodate changes to the Damage extension not unwrapping the GC + + commit 4dc2a76740d921c824a4d8193f39dd373475f02a + Author: Adam Jackson + Date: Thu Sep 20 17:57:00 2012 -0400 + + miext/damage: Only wrap into the GC ops chain if there's a listener (v3) + + leaves the GC->funcs still pointing to the damage layer as it calls into + the driver functions, so we need to be careful to restore the correct + function table after we manipulate the GC for fallbacks. + + Signed-off-by: Chris Wilson + +commit 8f5a6d107bb30fa218ff3c1d07532ca834b82edc +Author: Chris Wilson +Date: Tue Sep 25 13:36:12 2012 +0100 + + Add miInitializeBackingStore() to compat-api.h + + Signed-off-by: Chris Wilson + +commit dee133a722fb137767a78b244a312620f52a51b1 +Author: Chris Wilson +Date: Tue Sep 25 13:22:40 2012 +0100 + + sna: Remove unused reference to mibstore.h, removed in future Xorg + + Signed-off-by: Chris Wilson + +commit f0dbfc20aaa9b47329438ce42150770d4d7934c3 +Author: Chris Wilson +Date: Tue Sep 25 13:22:21 2012 +0100 + + sna/dri: Fixup a DBG statement not to print gibberish + + Signed-off-by: Chris Wilson + +commit c6008068372709c73034163eddc902b47bf87d24 +Author: Chris Wilson +Date: Sun Sep 23 21:42:31 2012 +0100 + + sna: Check against op->dst.bo rather than priv->cpu_bo for composite upload + + In this case, we may also be handling an unattached pixmap, so avoid the + deferences of the sna_pixmap unless we are sure it will exist. + + Signed-off-by: Chris Wilson + +commit 5ed840881c26e90eb8e00521b6d77b0ea514de5e +Author: Chris Wilson +Date: Sun Sep 23 20:29:21 2012 +0100 + + sna: Check that the CPU bo exists before declaring it is busy along upload + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55251 + Signed-off-by: Chris Wilson + +commit a858afc66c1fa2eec65a7041e991f2266f82deca +Author: Chris Wilson +Date: Sun Sep 23 13:49:40 2012 +0100 + + Silence a couple of potential compiler warnings + + Signed-off-by: Chris Wilson + +commit 9326acc2917109f06dda809107c8fa5a2273c3d2 +Author: Chris Wilson +Date: Sun Sep 23 13:40:04 2012 +0100 + + Allow compilation of a separate i810 driver + + Allow --enable-ums-only as a counter-option to --enable-kms-only in case + the distribution wishes to enable a non-root KMS driver but also offer + a separate UMS driver for i81x. + + On the second pass, use "--enable-ums-only --disable-uxa --disable-sna" + to get the trimmed down unaccelerated i810 support. + + Signed-off-by: Chris Wilson + +commit 0afb7efe8c48b5fc839e2137e870bea0f5fb3c9c +Author: Chris Wilson +Date: Sun Sep 23 09:41:59 2012 +0100 + + sna: Avoid overflows when translating the box16 extents during a copy + + Signed-off-by: Chris Wilson + +commit 0fc6e5820e4543d52bcf8d0285ca6f69b5213831 +Author: Chris Wilson +Date: Sun Sep 23 09:32:49 2012 +0100 + + sna: Add missing protection against int16 overflow when copying + + Signed-off-by: Chris Wilson + +commit c2ca1c5abca687adb08d6e137bc3b70bdecb083d +Author: Chris Wilson +Date: Sun Sep 23 08:56:50 2012 +0100 + + Reorder INTEL_XVMC define so that we pick up Option "XvMC" + + Otherwise it will remain disabled. + + Reported-by: Giacomo Comes + Signed-off-by: Chris Wilson + +commit 92dbedc6138b923aa473935013ecb0346280c4d3 +Author: Chris Wilson +Date: Sat Sep 22 08:56:49 2012 +0100 + + sna: Force the stall before trying to upload into a busy CPU bo + + Under the circumstances where we can not instead stream the write into + the GPU bo, we need to use the busy CPU bo. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54978 + Signed-off-by: Chris Wilson + +commit 3e1be265cf950976b5929b14a9dad0664deaa2c1 +Author: Chris Wilson +Date: Fri Sep 21 17:37:58 2012 +0100 + + sna: Force an inplace upload if already wedged + + Signed-off-by: Chris Wilson + +commit b8967aff382c1b6bef2335dea51c979a3f0800c7 +Author: Chris Wilson +Date: Fri Sep 21 12:16:27 2012 +0100 + + sna: Do not query for the NULL edid property + + If the EDID blob id is set to 0, that means that it does not exist and + so we can safely skip it. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55193 + Signed-off-by: Chris Wilson + +commit 0be1d964713ca407f029278a8256d02d925dc9da +Author: Chris Wilson +Date: Tue Sep 11 21:48:24 2012 +0100 + + sna: Use inplace X tiling for LLC uploads + + Based on a suggestion by Chad Versace (taken from a patch for mesa). + + This allows for a faster upload of pixel data through a ShmImage, or for + complete replacement of a GPU bo. + + Using a modified version of x11perf to upload to a pixmap rather than + scanout on an IVB i7-3720qm: + + Before: + 40000000 trep @ 0.0007 msec (1410000.0/sec): ShmPutImage 10x10 square + 4000000 trep @ 0.0110 msec ( 90700.0/sec): ShmPutImage 100x100 square + 160000 trep @ 0.1689 msec ( 5920.0/sec): ShmPutImage 500x500 square + + After: + 40000000 trep @ 0.0007 msec (1450000.0/sec): ShmPutImage 10x10 square + 6000000 trep @ 0.0061 msec ( 164000.0/sec): ShmPutImage 100x100 square + 400000 trep @ 0.1126 msec ( 8880.0/sec): ShmPutImage 500x500 square + + However, the real takeaway from this is that the overheads for + ShmPutImage are substantial, only hitting around 70% expected efficiency, + and overshadowed by PutImage, which for reference is + + 60000000 trep @ 0.0006 msec (1800000.0/sec): PutImage 10x10 square + + Signed-off-by: Chris Wilson + +commit d853064e7eebc5719645c12605782f995131a6fe +Author: Chris Wilson +Date: Thu Sep 20 22:43:26 2012 +0100 + + sna/gen3+: Trim the target extents to the CompositeClip + + When computing the active region with of a composite operation with + unknown extents we try to simply use the whole Drawable. However, this + needs to be clipped otherwise it may trigger assertion failure with an + offscreen pixmap. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=55164 + Signed-off-by: Chris Wilson + +commit 853beff4306d5a168e310af82d0ddf9db319fdce +Author: Chris Wilson +Date: Wed Sep 19 08:30:59 2012 +0100 + + sna/dri:Add some DBG and assertions to validate names passed back to clients + + Signed-off-by: Chris Wilson + +commit 8c1e60a15431b193b57d94a27b8e8de7c5a7e683 +Author: Chris Wilson +Date: Tue Sep 18 15:01:52 2012 +0100 + + sna: Add some asserts useful for tracking an xserver drawing bug + + Signed-off-by: Chris Wilson + +commit cd23ac69ffb670468b2993242ce0d596081bbca4 +Author: Chris Wilson +Date: Tue Sep 18 13:39:33 2012 +0100 + + sna/gen7: Add some ring switching sanity checks + + Signed-off-by: Chris Wilson + +commit 22c84d02ade83c39940d76fc616a9122e535606a +Author: Chris Wilson +Date: Tue Sep 18 12:01:49 2012 +0100 + + sna: Remove special casing of drawing depth=1 glyphs + + It turns out that they were not so special after all, and the "fast + path" was missing the important handling such as validating the GC. As a + result we ended up trying to render the glyphs through a planemask of 0 + and similar garbage resulting in corruption. An example given by Kaus + Dittrich was the use of rotated glyphs in gnuplot. + + Reported-by: Klaus Dittrich + Signed-off-by: Chris Wilson + +commit 71fa350325bb06a6141f89ef14431d96f0c4956a +Author: Chris Wilson +Date: Mon Sep 17 13:40:24 2012 +0100 + + sna: Check that we do not keep a GPU bo around after flushing a ShmPixmap + + Signed-off-by: Chris Wilson + +commit 88502b32d5d2b826fc08344392c98300341410e1 +Author: Chris Wilson +Date: Sun Sep 16 09:02:46 2012 +0100 + + 2.20.8 release + + Signed-off-by: Chris Wilson + +commit 395d738b5086f24659b56b4b3536bffaebad8a3e +Author: Chris Wilson +Date: Sat Sep 15 21:18:35 2012 +0100 + + sna: Improve handling of probe failure during initialisation + + Signed-off-by: Chris Wilson + +commit fe78904a45979d47bb092ce37d321854e2418344 +Author: Chris Wilson +Date: Thu Sep 13 22:15:14 2012 +0100 + + Add basic support for ValleyView + + Bind to the ValleyView SDV for verifying the render routines. + + Signed-off-by: Chris Wilson + +commit 3b9259f7cedc179617bc24b3912d2d8d75c5a824 +Author: Ian Stakenvicius +Date: Fri Sep 14 21:04:42 2012 +0100 + + configure: Make udev dependency optional + + In order to support buildbots where the udev headers may exist on the + build system but not the target, we need explicit control over optional + dependencies. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54942 + +commit d995705fb01842652a79076cbecee4392f653bfe +Author: Chris Wilson +Date: Fri Sep 14 19:32:06 2012 +0100 + + sna: Only discard CPU damage if we completely overwrite its extents + + If we are performing a clipped copy, then we must be careful not to + completely discard the CPU damage as it may not be entirely replaced. + + Reported-by: Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54937 + Signed-off-by: Chris Wilson + +commit deacab87e4ba7fe09f0f16568dc2848949f2707a +Author: Chris Wilson +Date: Fri Sep 14 17:01:13 2012 +0100 + + sna/dri: flip->next_front.bo is owned by the DRI drawable not by the flip + + Be careful not to delete the reference we presume we hold as it is + borrowed from the DRI drawable. + + Signed-off-by: Chris Wilson + +commit 5369408d596a0611d4f76333dac2e1c93e63e8b6 +Author: Chris Wilson +Date: Fri Sep 14 16:12:00 2012 +0100 + + sna/dri: And the hunt for the use-after-free continues... + + Signed-off-by: Chris Wilson + +commit 8e9d64203428b344433ac8f86dc1f06d2c32529a +Author: Chris Wilson +Date: Fri Sep 14 14:06:38 2012 +0100 + + sna: Fix typo for sna_render_picture_flatten() + + Pass it the correct value for the pixmap height, and not its 'y' + coordinate! + + Reported-by: Eugene Rosenzweig + Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=434860 + Signed-off-by: Chris Wilson + +commit 6ee9969f0e99975a24e113af9591909d9023d8af +Author: Chris Wilson +Date: Fri Sep 14 13:04:50 2012 +0100 + + sna/dri: Update AsyncSwap for recent changes in tracking DRI drawables + + Signed-off-by: Chris Wilson + +commit d2dbb991384f2b820a714eba262691ed97a6a22a +Author: Chris Wilson +Date: Fri Sep 14 13:04:14 2012 +0100 + + sna/dri: Add a bunch of assertions for hunting a use-after-free + + Signed-off-by: Chris Wilson + +commit d8756091474aeb44e5d8eed6b20b65c23b6574e7 +Author: Chris Wilson +Date: Fri Sep 14 12:17:28 2012 +0100 + + sna/dri: Version bump for prototypical AsyncSwap + + Signed-off-by: Chris Wilson + +commit 0fc3d020f3086b5c6ecef1fed1aaedef7aa52b01 +Author: Chris Wilson +Date: Fri Sep 14 09:49:00 2012 +0100 + + Skip adding unknown special modes + + In light of the discussion on how to add stereo modes it was revealed + that we would happily add modes with unknown and unhandled strange + flags. Adam Jackson mentioned that he has plans to fix that with some + upcoming work, but as a first step we can simply eradicate them whilst + pondering how to support the stereoscopic vision of the future. + + Signed-off-by: Chris Wilson + +commit 35d81d97b38d05f132a4823e57fff4012e966504 +Author: Chris Wilson +Date: Thu Sep 13 22:32:47 2012 +0100 + + sna/gen7: Defensively program default GT values + + Signed-off-by: Chris Wilson + +commit 3fbdedbf9d509c5ca58ae0a01fe8e54dcc990cf8 +Author: Chris Wilson +Date: Thu Sep 13 22:10:08 2012 +0100 + + sna: Fix analysis of source extents for BLT composite + + After we have computed the source offset vector for the transformed + source bo, we need to use that with respect to the destination rectangle + to verify that the source sample is wholly within bounds. + + Signed-off-by: Chris Wilson + +commit 6c7f998f7bda4f4f1286e079412d5d3a5b2eb073 +Author: Chris Wilson +Date: Thu Sep 13 20:41:23 2012 +0100 + + sna: Fix BLT composite offset + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54868 + Signed-off-by: Chris Wilson + +commit 2575cd0d236b4e1694e3185a487ebfd8bfe6499f +Author: Chris Wilson +Date: Thu Sep 13 20:08:37 2012 +0100 + + sna: Avoid corrupting the CPU bo when compositing fallback data through BLT + + Signed-off-by: Chris Wilson + +commit 5781de2e5ab0d7e8e62965bda714789879555ed4 +Author: Chris Wilson +Date: Thu Sep 13 19:53:29 2012 +0100 + + sna/gen3: Tidy NO_COMPOSITE debugging + + Signed-off-by: Chris Wilson + +commit dd1432b2c00c94ac75af4740b66b5cd1a573e261 +Author: Chris Wilson +Date: Thu Sep 13 19:47:29 2012 +0100 + + sna: Do not attempt to change tiling if wedged + + The caller will just have to live with the current tiling, which should + be fine in most cases, in other cases the gpu is wedged... + + Signed-off-by: Chris Wilson + +commit 8c7dd2219fa777bf6354c4e0ef38a2f09fe09675 +Author: Chris Wilson +Date: Thu Sep 13 17:14:23 2012 +0100 + + sna: Prefer to use indirect uploads for very small updates + + Signed-off-by: Chris Wilson + +commit d87a56ed1789e0c5058b302bb930d7e952ff3e5e +Author: Chris Wilson +Date: Thu Sep 13 09:57:30 2012 +0100 + + sna: Teach sna_replace__xor() how to tile large uploads + + This path is hit using eog+cairo-1.10 and a large image, e.g. + http://marsrovers.jpl.nasa.gov/gallery/press/opportunity/20120705a/PIA15689_Greeley_Pan_wDeck_L257F.jpg + + Reported-by: Michael Laß + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54808 + Signed-off-by: Chris Wilson + +commit 58a96f0f684fe0d7d1a7890c630539ef8b065d1e +Author: Chris Wilson +Date: Wed Sep 12 23:53:44 2012 +0100 + + sna: Also remove bogus assertion from sna_replace__xor() + + Like the assertion in sna_replace() this is now incorrect due to the + automatic flagging of large bo with flush. + + Signed-off-by: Chris Wilson + +commit 6069e78238ca57e3433d528680fe04766a1e5307 +Author: Chris Wilson +Date: Wed Sep 12 16:22:49 2012 +0100 + + sna: Keep a very small, short-lived cache of large buffers + + As we now regularly retire and so discard the temporary large buffers, + we find them in short supply and ourselves wasting lots of time creating + and destroying the transient buffers. + + Signed-off-by: Chris Wilson + +commit 1e2a03ad19664e846ece4110e53d26babb5a2159 +Author: Chris Wilson +Date: Wed Sep 12 16:15:22 2012 +0100 + + sna: Propagate busyness when creating the proxy + + Signed-off-by: Chris Wilson + +commit e28f5a2537821dc170a7ef78bf33ecbd3c032da0 +Author: Chris Wilson +Date: Wed Sep 12 15:21:27 2012 +0100 + + sna: Add some DBG as to why kgem_check_bo() flushes + + Signed-off-by: Chris Wilson + +commit 1af1dae1feefd6567017170bab241570fb528e5c +Author: Chris Wilson +Date: Wed Sep 12 15:20:49 2012 +0100 + + sna: Ensure tiling upload buffers are trimmed to fit in the cache + + Signed-off-by: Chris Wilson + +commit e5f137807c318588f546960668345eef34159e26 +Author: Chris Wilson +Date: Wed Sep 12 14:11:43 2012 +0100 + + sna: Avoid fallbacks to shadow pixels if FORCE_GPU is in effect + + References: https://bugs.freedesktop.org/show_bug.cgi?id=54808 + Signed-off-by: Chris Wilson + +commit 0d17208a66a7e54d4106f8a4034d3a928e28bb62 +Author: Chris Wilson +Date: Wed Sep 12 14:04:50 2012 +0100 + + sna: Avoid readback inplace if the target is unmappable + + We have to use the tiling indirect path, or else fail. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=54808 + Signed-off-by: Chris Wilson + +commit 4b4abdaae94d164d5d0b2755907e76b9cbe0c988 +Author: Chris Wilson +Date: Wed Sep 12 13:47:26 2012 +0100 + + sna: Flush after operating on large buffers + + As we know that such operations are likely to be slow and consume + precious GTT space, mark them as candidates for flushing. + + Signed-off-by: Chris Wilson + +commit 15911f533d6a7ef40e42ba5921fac7c62b290f8b +Author: Chris Wilson +Date: Tue Sep 11 14:59:53 2012 +0100 + + prime: Reorder probe messages so that the driver prefix is correct + + Signed-off-by: Chris Wilson + +commit bc73acbd4da53bc50752c0413adcd0ce876e0a03 +Author: Chris Wilson +Date: Mon Sep 10 18:55:04 2012 +0100 + + uxa: Error out after failing to become DRM master during PreInit + + As we set the card fd to -1 upon failure, the error here is + non-recoverable, so make sure it gets propagated and we abort loading + the intel ddx. + + Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/962892 + Signed-off-by: Chris Wilson + +commit b0d14071f7b60729c223af925935227393fbd3ee +Author: Chris Wilson +Date: Mon Sep 10 13:53:45 2012 +0100 + + sna: Workaround issue with global glyph privates and shared ZaphodHeads + + Under ZaphodHeads we end up with multple screens accessing the common + sna_glyph_key and so cause conflicting updates and erroneous references + into the screen-local texture atlases. + + Two approaches can be tried here. Transition to a screen-specific + private key introduced with xorg-1.13, or to move the glyph cache (and + the rest of the gpu state tracker) down into the device private rather + than screen private. This is neither of those, but a workaround to avoid + reusing the incorrect entries from shared screens. + + Reported-by: Stephen Liang + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54707 + Signed-off-by: Chris Wilson + +commit cfa0c6162bbd2f6edab1301b6aed886af7e8ab38 +Author: Chris Wilson +Date: Mon Sep 10 10:50:03 2012 +0100 + + sna: Fixup possible_crtcs for ZaphodHeads + + As the possible_crtcs is a bitmask of the available crtcs exposed to the + Xserver, we need to adjust it for the limited view given by Zaphod mode. + + Signed-off-by: Chris Wilson + +commit 95c71d1626dfbd97733e7e7e03fdde3af833446e +Author: Chris Wilson +Date: Sat Sep 8 20:12:32 2012 +0100 + + NEWS: Fix version reference 'bugs since 2.20.6'! + + Signed-off-by: Chris Wilson + +commit 0659711dfa9c9fc52adeaba766049887d5b6f040 +Author: Chris Wilson +Date: Sat Sep 8 20:01:32 2012 +0100 + + 2.20.7 release + + Signed-off-by: Chris Wilson + +commit 2c8e48f8149499040342836491333402fd05b762 +Author: Chris Wilson +Date: Fri Sep 7 23:00:47 2012 +0100 + + sna: Remember that LineDoubleDash involves updating the GC between segments + + Signed-off-by: Chris Wilson + +commit ed7b8db24921dc0bb6ea59dacf35ea41a61d59bf +Author: Chris Wilson +Date: Fri Sep 7 22:12:17 2012 +0100 + + sna: Pass the hints down to the PolyPoint fallback + + Signed-off-by: Chris Wilson + +commit 6c9df48fa8f1ac93103ce771ae28f47faa321619 +Author: Chris Wilson +Date: Fri Sep 7 22:05:19 2012 +0100 + + sna: Fix PolyPoint fallback through a complex clip + + Signed-off-by: Chris Wilson + +commit 7d76eb155ed78343abfa15b7c8af87fc3d4211e4 +Author: Chris Wilson +Date: Fri Sep 7 18:06:25 2012 +0100 + + sna: First scan for a backlight associated with the device + + The goal is to find the right interface in a multi-GPU system. + + Signed-off-by: Chris Wilson + +commit 2de7d2d8150d648815feb74a3ae2239b908b971e +Author: Chris Wilson +Date: Fri Sep 7 16:56:33 2012 +0100 + + sna/prime: Fixup attaching the randr14 scanout pixmap + + Signed-off-by: Chris Wilson + +commit 448808d8a4e78afa7fe90e318d6d7afdbff66190 +Author: Chris Wilson +Date: Fri Sep 7 14:31:52 2012 +0100 + + prime: Allocate a GPU_SCREEN when not primary to fulfil the output sink role + + Signed-off-by: Chris Wilson + +commit 3dce661ef3df5558fe9c9d85324ab3395a37b7ea +Author: Chris Wilson +Date: Fri Sep 7 13:48:12 2012 +0100 + + sna: And remember to update the ScreenPixmap after resize + + Fixes the regression from the previous commit + + Signed-off-by: Chris Wilson + +commit 0c39c363d7235d03f27337c731c0ffe3369bf713 +Author: Chris Wilson +Date: Fri Sep 7 13:07:52 2012 +0100 + + sna: Protect sna_crtc_resize() against early invocation with no RootWindow + + If the outputs are resized very early on, in CreateScreenResources, then + we will not yet have created a RootWindow and so trying to change its + pixmap is a futile effort. + + Signed-off-by: Chris Wilson + +commit d7879a5939cabcd8b804e19fc422d2022ab7e3a4 +Author: Chris Wilson +Date: Fri Sep 7 12:18:08 2012 +0100 + + sna/dri: Fix the double-buffer pageflipping path + + Notably, we need to remember to exchange the front/back buffers after + flipping! + + Signed-off-by: Chris Wilson + +commit 2630c81937115602faa352fca369d89fbb926b33 +Author: Chris Wilson +Date: Fri Sep 7 11:23:02 2012 +0100 + + sna/dri: Make sure we set the SCANOUT flag when creating bo for pageflips + + In case we should be creating an untiled framebuffer, we need to make + sure we honour the scanout alignment. + + Signed-off-by: Chris Wilson + +commit aeef03520f1b2a4b8638ff1ed4fbf19c9b35e7c8 +Author: Chris Wilson +Date: Thu Sep 6 11:46:53 2012 +0100 + + sna/prime: Correct the pinning flag when importing the prime bo + + Signed-off-by: Chris Wilson + +commit 9bdf46d6c1a29b7b9e3d35e39a2e789334c0e1be +Author: Chris Wilson +Date: Thu Sep 6 11:38:08 2012 +0100 + + sna/prime: Distinguish forms of pinned pixmap + + So that we can allow prime to replace the backing bo of currently + exported pixmaps through DRI2. + + Signed-off-by: Chris Wilson + +commit 39c4be2b0be66ed83bf059d3007f4143325e340d +Author: Chris Wilson +Date: Thu Sep 6 11:28:49 2012 +0100 + + uxa: Distinguish forms of pinning + + This allows us to replace the prime bo to meet sharing requirements, but + still maintain the integrity with other users. + + Signed-off-by: Chris Wilson + +commit 031fa1c1c1129e486a02ffb5b3b9071f03b60048 +Author: Chris Wilson +Date: Thu Sep 6 11:08:23 2012 +0100 + + uxa/prime: Mark the pixmap as pinned once exported (similar to flink) + + Signed-off-by: Chris Wilson + +commit e5d3f3818660cb875ce2ef4721c51bc95317b78d +Author: Chris Wilson +Date: Thu Sep 6 10:54:57 2012 +0100 + + sna: Add is-pinned checks to changing the pitch on an existing bo + + Signed-off-by: Chris Wilson + +commit f2affe403baea78b9c94e3d726d1b9d8a0004f35 +Author: Chris Wilson +Date: Thu Sep 6 10:24:04 2012 +0100 + + sna: Apply the minimum 256 pitch to CREATE_USAGE_SHARED pixmaps as well + + Signed-off-by: Chris Wilson + +commit fbe4080816191ee97347128444f56bcc34858481 +Author: Chris Wilson +Date: Thu Sep 6 08:57:34 2012 +0100 + + prime: Align pitch of shared untiled buffers to 256 bytes + + In order for nvidia to handle the buffers we are currently generating, + they need to have a pitch alignment of 256 bytes. Make it so. + + Signed-off-by: Chris Wilson + +commit c5fb025267bf1019907dfcc60f0efef2691be436 +Author: Chris Wilson +Date: Thu Sep 6 08:55:46 2012 +0100 + + sna: Correct assertions for adding damage that bypasses the region + + Signed-off-by: Chris Wilson + +commit 1f5d5a37e57e63fa6e5b336a4847ce4422b89044 +Author: Chris Wilson +Date: Wed Sep 5 17:17:58 2012 +0100 + + Add PlatformProbe to handle sharing of device entities + + Reported-by: Nick Bowler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54561 + Signed-off-by: Chris Wilson + +commit ddde40afc081f47a3b6b694aeb21682c240c9562 +Author: Chris Wilson +Date: Wed Sep 5 16:48:01 2012 +0100 + + sna: Harden against initialisation failures + + References: https://bugs.freedesktop.org/show_bug.cgi?id=54561 + Signed-off-by: Chris Wilson + +commit 4627dc36fa56ab971cd90088bd29a597dd12dc02 +Author: Chris Wilson +Date: Wed Sep 5 16:17:17 2012 +0100 + + Revert "sna: Flush the batch before a render operation if the GPU is idle" + + This reverts commit ad57ac07a273bf376b74884de47d8ee1e7129fb8. + + These checks end up being too frequent and not allowing us to batch + sufficient commands to offset the overhead of batch submission. Hmm. + +commit 886f3cef4101a674bb62656cf7f3046643cae4b1 +Author: Chris Wilson +Date: Wed Sep 5 15:27:21 2012 +0100 + + uxa: Fix cut'n'paste error in Option "Backlight" + + Signed-off-by: Chris Wilson + +commit 6211d0914e2ed1cdd4cc2e170ee16129fc9f0d73 +Author: Chris Wilson +Date: Wed Sep 5 12:33:08 2012 +0100 + + uxa: Flush batch immediately after queuing a WAIT_FOR_EVENT + + We still encounter hangs with kernel-3.5 with the culprit being a wait + on a disabled pipe. As we thoroughly check before that the pipe is still + disabled and flush before a modeset, the only possibility that remains + is that DPMS is disabling the pipe before we submit. Close that race by + always submitting the batch immediately after a WAIT_FOR_EVENT. + + Signed-off-by: Chris Wilson + +commit 6a1423547769c24d15f6475628981d14a76a4bb2 +Author: Chris Wilson +Date: Wed Sep 5 12:15:52 2012 +0100 + + sna: Initialise the empty boxes field of the region before subtracting it + + Fixes regression from commit 38fb77af757318e5fb6f605b37306ce4585b11a5 + Author: Chris Wilson + Date: Wed Sep 5 08:23:34 2012 +0100 + + sna: Don't upload ignored cpu damage + + Signed-off-by: Chris Wilson + +commit dff25e5ec4071a0404f82760e8deec3f99f4a0a9 +Author: Chris Wilson +Date: Wed Sep 5 11:05:28 2012 +0100 + + sna: Drop master after discarding framebuffers + + As Imre Deak pointed out in the previous patch, drmModeRmFB only works + when we hold the DRM master, therefore to prevent a leak of the + framebuffer across server reset we need to defer dropping master until + after we release our scanouts and modes. + + Signed-off-by: Chris Wilson + +commit 46981d01700c1159bfb6bc0aebc938ff1d447a0f +Author: Imre Deak +Date: Fri Aug 31 14:31:51 2012 +0300 + + uxa: fix leakage of FB when closing the screen + + Calling drmModeRmFB is only allowed in DRM master mode. Since leaving + the VT also drops master mode we need to remove the FB before calling + I830LeaveVT. + + This is only a real leak in case of a server reset, otherwise the server + process will exit anyway and the kernel will clean up the FB. + + Signed-off-by: Imre Deak + Signed-off-by: Chris Wilson + +commit 55cef974a5dad3fda1922648fa27bcf5bb32ea03 +Author: Chris Wilson +Date: Wed Sep 5 09:38:47 2012 +0100 + + sna: Review validity of damage when discarding CPU bo + + Signed-off-by: Chris Wilson + +commit 587499bbf55b7eb0e1848822a792d535a8a3db1b +Author: Chris Wilson +Date: Wed Sep 5 10:56:18 2012 +0100 + + sna/video: Use the scanout flag and FB id for sprite framebuffers + + So that we can use the same teardown path as normal scanouts. + + Signed-off-by: Chris Wilson + +commit 913adacc5400f94bc754f22375447e6f90ccd510 +Author: Chris Wilson +Date: Wed Sep 5 09:20:55 2012 +0100 + + sna/gen7: Always emit a stall when flushing the texture cache + + Reported-by: Reinhard Karcher + References: https://bugs.freedesktop.org/show_bug.cgi?id=54488 + Signed-off-by: Chris Wilson + +commit bdfedb46bd5bb3b96543a3ff553abd8ed0774fad +Author: Chris Wilson +Date: Wed Sep 5 09:15:12 2012 +0100 + + sna: Use async upload only if the last render was not CPU + + Signed-off-by: Chris Wilson + +commit 67b75ae6f66e2d8e97b0aaf70d66b6de30f9e67e +Author: Chris Wilson +Date: Wed Sep 5 08:46:39 2012 +0100 + + sna: Tweak upload path to remove redundant code + + Signed-off-by: Chris Wilson + +commit 38fb77af757318e5fb6f605b37306ce4585b11a5 +Author: Chris Wilson +Date: Wed Sep 5 08:23:34 2012 +0100 + + sna: Don't upload ignored cpu damage + + Signed-off-by: Chris Wilson + +commit 2eb32f711ddd65a55c3c21f813b41aca49635a22 +Author: Chris Wilson +Date: Wed Sep 5 00:22:04 2012 +0100 + + sna: Add DBG control to disable CPU bo + + Signed-off-by: Chris Wilson + +commit 19e170aa6fd3652cc2e983a291f82350dca27e52 +Author: Chris Wilson +Date: Tue Sep 4 23:52:42 2012 +0100 + + sna: Fix comparison of memcpy overlap to include x-offsets + + Signed-off-by: Chris Wilson + +commit 7895416eabfc5bd361d0d0ff92c570e2f6af47e0 +Author: Chris Wilson +Date: Tue Sep 4 20:30:53 2012 +0100 + + sna: Rearrange use_cpu() tests for composite ops to avoid syncing CPU bo + + Signed-off-by: Chris Wilson + +commit ad57ac07a273bf376b74884de47d8ee1e7129fb8 +Author: Chris Wilson +Date: Tue Sep 4 20:06:49 2012 +0100 + + sna: Flush the batch before a render operation if the GPU is idle + + Experiment with pushing those first commands earlier. + + Signed-off-by: Chris Wilson + +commit 6325d7e29a8bacede321362c20bf3acd33c48651 +Author: Chris Wilson +Date: Tue Sep 4 14:51:54 2012 +0100 + + NEWS: fixup missing links to bugs referenced in 2.20.6 release notes + + Reported-by: Adam Jackson + Signed-off-by: Chris Wilson + +commit bc309bad39035649ee377c1d5af9099491a8ea43 +Author: Chris Wilson +Date: Tue Sep 4 14:22:15 2012 +0100 + + sna: And remember to flush the damage to the output slaves... + + Signed-off-by: Chris Wilson + +commit 68d207588a177afa4e999260bfddb4d6dba1029b +Author: Chris Wilson +Date: Tue Sep 4 13:20:21 2012 +0100 + + sna: Improve handling of output offloading + + In particular, don't forget to flush when we only have offload slaves + and no native pixmaps. + + Signed-off-by: Chris Wilson + +commit 8cf7ac776b9b47dabd5ab141e5a5385c44d3f309 +Author: Chris Wilson +Date: Tue Sep 4 13:55:34 2012 +0100 + + sna: Fix a typo in an error message + + s/achieve/retrieve/ otherwise it is nonsense. + + Signed-off-by: Chris Wilson + +commit be83b98d299c74101357e7bf170b1451aec2e1f2 +Author: Chris Wilson +Date: Tue Sep 4 11:23:58 2012 +0100 + + sna: Add some DBG to the prime paths + + Signed-off-by: Chris Wilson + +commit d0684d55e3a62c231c92a68403cf100c9e18351b +Author: Chris Wilson +Date: Tue Sep 4 11:05:43 2012 +0100 + + sna: Fixup CREATE_USAGE_SHARED + + The DRI2 code tries to create pixmaps with non-zero width/height, + whoops. + + Signed-off-by: Chris Wilson + +commit b6ced7a2267f9429ad38949dda39c843e2119e99 +Author: Chris Wilson +Date: Tue Sep 4 10:05:46 2012 +0100 + + sna: Fix typo for detecting prime ioctls + + Signed-off-by: Chris Wilson + +commit df68723baae71498de95924c72d4f23fa7fc7fdf +Author: Chris Wilson +Date: Mon Sep 3 20:43:48 2012 +0100 + + sna: Port prime interfacing + + Preliminary prime support. + + Signed-off-by: Chris Wilson + +commit e3ad18036b4dca29744ecfa4694006f01dd3fd18 +Author: Chris Wilson +Date: Mon Sep 3 20:53:30 2012 +0100 + + sna: Enable platform probing + + Completing commit 0768ac4d195214825137152893deb74a87fcd11e + Author: Dave Airlie + Date: Wed Jul 25 16:11:23 2012 +1000 + + intel: add platform probing support. + + Signed-off-by: Chris Wilson + +commit 3dc644b2a959fc559e1138b332ed42d7235de42f +Author: Сковорода Никита Андреевич +Date: Mon Sep 3 13:44:21 2012 +0400 + + uxa: Fix Backlight option support. + + Signed-off-by: Сковорода Никита Андреевич + +commit a972affe0c78b23a119d5dd14bb4446c89122af1 +Author: Chris Wilson +Date: Sun Sep 2 17:43:33 2012 +0100 + + sna/gen6+: Redirect fills if the destination is too large for 3D + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54134 + Signed-off-by: Chris Wilson + +commit 18d26076c778c20eb589b638fc47fa847793f149 +Author: Dave Airlie +Date: Tue Sep 4 07:19:12 2012 +1000 + + intel: fix return value for no pEnt + + Probably never gets hit but shuold return FALSE, + + pointed out on irc by Lekensteyn + + Signed-off-by: Dave Airlie + +commit d14ff42f2a205542df2ef723c6151d18db2bea8b +Author: Dave Airlie +Date: Thu Jul 26 10:43:29 2012 +1000 + + intel: query kernel for caps to setup scrn capabilities. + + This queries the kernel for prime support before advertising + the capabilities. + + Signed-off-by: Dave Airlie + +commit 6705d8237aca90964449e4dbee97b4f62b87c28b +Author: Dave Airlie +Date: Thu Jul 26 10:37:04 2012 +1000 + + intel: add pixmap tracking and scanout support. (v2) + + This adds support for pixmap tracking and scanout of + alternate pixmaps. + + v2: do dirty updates after uxa block handler, check if kernel + can flush vmap for us so we don't have to. + + Signed-off-by: Dave Airlie + +commit 69827126abdfa289417b55fe7db8ae0535037185 +Author: Dave Airlie +Date: Wed Jul 25 16:22:57 2012 +1000 + + intel/uxa: add pixmap sharing support. + + Signed-off-by: Dave Airlie + +commit 0768ac4d195214825137152893deb74a87fcd11e +Author: Dave Airlie +Date: Wed Jul 25 16:11:23 2012 +1000 + + intel: add platform probing support. + + This allows the driver to be loaded by the platform loading code. + + Signed-off-by: Dave Airlie + +commit 164ae7a4f9fd3e538f1b506031d297088fc0c659 +Author: Chris Wilson +Date: Sun Sep 2 17:19:12 2012 +0100 + + man: Malformed "Backlight" section + + Reported-by: Matthew Monaco + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54397 + Signed-off-by: Chris Wilson + +commit 67b44104168650473a24e69056707e0b35f1713e +Author: Chris Wilson +Date: Sun Sep 2 12:47:36 2012 +0100 + + sna: Cache the temporary upload buffer when copying boxes + + Signed-off-by: Chris Wilson + +commit 4b558281e04e4d4febfc361632a90f8a45080c49 +Author: Chris Wilson +Date: Sun Sep 2 12:23:59 2012 +0100 + + sna: Don't retire when searching for a snoopable buffer without hw support + + If the hw/kernel doesn't support snoopable buffers, then it makes little + sense to search for one, and force a retire in the certainty of not + finding any. + + Signed-off-by: Chris Wilson + +commit d933f3a7965c9aa70f70477be3bfe94d5ded948b +Author: Chris Wilson +Date: Sun Sep 2 10:29:49 2012 +0100 + + 2.20.6 release + + Signed-off-by: Chris Wilson + +commit 62e7e69d88f7e5c8b0f0931fe887ee0c3bddb43f +Author: Chris Wilson +Date: Sun Sep 2 09:55:07 2012 +0100 + + sna: Tweak placement rules if we already have a CPU bo + + If we have a CPU bo, consider if it may be quicker to render to it then + create a GPU bo. + + Signed-off-by: Chris Wilson + +commit f837807cc257fbedd35fa6101dc0b4a57e5ad78d +Author: Chris Wilson +Date: Sat Sep 1 10:36:09 2012 +0100 + + sna/dri: Remove busy-wait spin from vblank chaining of swapbuffers + + The issue being that, due to the delay, the chained swap would miss its + intended vblank and so cause an unwanted reduction in frame throughput + and increase output latency even further. Since both client and server + have other rate-limiting processes in place, we can forgo the stall here + and still keep the clients in check. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54274 + Signed-off-by: Chris Wilson + +commit b56e8c5105c858452ca4eabf15b298fc06dfd3c8 +Author: Chris Wilson +Date: Sat Sep 1 12:15:47 2012 +0100 + + sna: Nullify gpu_bo after free in case final release is deferred in destroy + + As we may defer the actual release of the pixmap until after completion + of the last shm operation, we need to make sure in that case we mark the + GPU bo as released to prevent a use-after-free. + + Signed-off-by: Chris Wilson + +commit c4d994014160d8c946af731196a908991c77d9f9 +Author: Chris Wilson +Date: Sat Sep 1 10:44:24 2012 +0100 + + sna/gen2+: Add the missing assertions in case the drawrect is invalid + + Only the later gen had these useful assertions, add them to the rest + just in case. + + Signed-off-by: Chris Wilson + +commit 25c1b478a957ceb0474e7121840b7eed1ba2e140 +Author: Chris Wilson +Date: Sat Sep 1 09:49:34 2012 +0100 + + sna: Discard cached CPU upload early when clearing with a solid fill + + Otherwise we end up considering the GPU bo as a real target, causing + confusion and failed asserts. + + Signed-off-by: Chris Wilson + +commit 530b1d1516595cf14c5112d8833b870cd50eca46 +Author: Chris Wilson +Date: Thu Aug 30 22:21:57 2012 +0100 + + sna/dri: Use common routine for testing busyness after flush + + Signed-off-by: Chris Wilson + +commit 00d8c776b3607dbdab32c1126f91a7a38b8065f6 +Author: Chris Wilson +Date: Thu Aug 30 21:47:17 2012 +0100 + + sna/dri: Hold a reference to the vsync blit + + Fixes regression from + + commit 96a921487ef00db03a12bec7b0821410d6b74c31 + Author: Chris Wilson + Date: Mon Aug 27 21:50:32 2012 +0100 + + sna: Track outstanding requests per-ring + + Signed-off-by: Chris Wilson + +commit b2a6c74c2159c9968c19400d61a11f4773724b4a +Author: Chris Wilson +Date: Wed Aug 29 14:51:40 2012 +0100 + + sna: Remove inconsistent assertion + + As we now may not prefer to use the GPU even if all-damaged and clear, + asserting that if we choose to use the CPU if clear is now bogus. + + Signed-off-by: Chris Wilson + +commit deaa1cac269be03f4ec44092f70349ff466d59de +Author: Chris Wilson +Date: Tue Aug 28 22:23:22 2012 +0100 + + sna: Align active upload buffers to the next page for reuse + + If we write to the same page as it already active on the GPU then + despite the invalidation performed at the beginning of each batch, we do + not seem to correctly sample the new data. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + References: https://bugs.freedesktop.org/show_bug.cgi?id=52299 + Signed-off-by: Chris Wilson + +commit 9e0305a3928f253ded6c8e141a4dd42be3952eb9 +Author: Chris Wilson +Date: Tue Aug 28 20:49:20 2012 +0100 + + sna: Discard inplace flag if we create a CPU map for the upload buffer + + Signed-off-by: Chris Wilson + +commit f3e122554e88da0351bfb9a7a722f0715553689b +Author: Chris Wilson +Date: Tue Aug 28 21:27:04 2012 +0100 + + sna: Propagate the request to flush rather than directly submit the batch + + The subtly is that we need to reset the mode correctly after + submitting the batch which was not handled by kgem_flush(). If we fail + to set the appropriate mode then the next operation will be on a random + ring, which can prove fatal with SandyBridge+. + + Reported-by: Reinis Danne + Signed-off-by: Chris Wilson + +commit b5c8efe4309248e62d94d80b37a70775284ae985 +Author: Chris Wilson +Date: Tue Aug 28 08:33:00 2012 +0100 + + sna: Make sure we reset the domain tracking when exporting DRI bo + + Signed-off-by: Chris Wilson + +commit 96a921487ef00db03a12bec7b0821410d6b74c31 +Author: Chris Wilson +Date: Mon Aug 27 21:50:32 2012 +0100 + + sna: Track outstanding requests per-ring + + In order to properly track when the GPU is idle, we need to account for + the completion order that may differ on architectures like SandyBridge + with multiple mostly independent rings. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54127 + Signed-off-by: Chris Wilson + +commit 26c731efc2048663b6a19a7ed7db0e94243ab30f +Author: Chris Wilson +Date: Mon Aug 27 20:50:08 2012 +0100 + + sna: Ensure that we create a GTT mapping for the inplace upload buffer + + As the code will optimistically convert a request for a GTT mapping into + a CPU mapping if the object is still in the CPU domain, we need to + overrule that in this case where we explicitly want to write directly + into the GTT and furthermore keep the buffer around in an upload cache. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + References: https://bugs.freedesktop.org/show_bug.cgi?id=52299 + Signed-off-by: Chris Wilson + +commit 2cbf88980ede50370b97f32e565dea33db16ac44 +Author: Chris Wilson +Date: Mon Aug 27 20:07:17 2012 +0100 + + sna: Force the stall if using a busy ShmPixmap bo with PutImage + + As we will stall in the near future to serialise access with the + ShmPixmap, we may as well stall first and do a simple copy using the + CPU in this highly unlikely scenario. + + Signed-off-by: Chris Wilson + +commit 705103d77e6b80d796a4535cade96cb6e9ebece3 +Author: Chris Wilson +Date: Mon Aug 27 20:07:19 2012 +0100 + + sna: Add a modicum of DBG to kgem_is_idle() + + Print out the handle of the bo we just checked. + + Signed-off-by: Chris Wilson + +commit 8218e5da2b177ca9cd0e2b1e7dbe114e5ef2ebf0 +Author: Chris Wilson +Date: Mon Aug 27 19:36:03 2012 +0100 + + sna: Fix crash with broken DBG missing one of its arguments + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54127 + Signed-off-by: Chris Wilson + +commit 593f549b45fbb1528472feed51207d84901d142e +Author: Chris Wilson +Date: Mon Aug 27 16:43:19 2012 +0100 + + sna: A little more DBG to try and identify ratelimiting ops + + Signed-off-by: Chris Wilson + +commit 71ac12e9b6ed00c28993637aafd5186a2ba26256 +Author: Chris Wilson +Date: Mon Aug 27 15:49:59 2012 +0100 + + sna: Assert that the bo is marked as 'flush' when exported to DRI clients + + Signed-off-by: Chris Wilson + +commit cf64c8ce758cfa5d3bcd1b7626ff94cce7a84636 +Author: Chris Wilson +Date: Mon Aug 27 13:59:56 2012 +0100 + + sna: Upload PutImage inplace to a fresh GPU bo if the device doesn't snoop + + Signed-off-by: Chris Wilson + +commit 3c6758fc4a50ecfce9ed317fec669cc48addedcf +Author: Chris Wilson +Date: Mon Aug 27 11:58:05 2012 +0100 + + sna: Flush the batch if it references a ShmPixmap and the GPU is idle + + This helps minimise the stall when syncing with the GPU before sending + the next reply to the Client. + + Signed-off-by: Chris Wilson + +commit f21079bad6e8316baf5d0295d6e7a809041bce06 +Author: Chris Wilson +Date: Mon Aug 27 11:25:28 2012 +0100 + + Revert "sna: Cleanup composite redirection after substituting the BLT" + + This reverts commit 5a5212117e7a73ce3fffb87c60a505a849e38c36. + + The clean up is in effect too early, as this is during preparation and + the actual work is already being correctly done at the end. + +commit 414e87255cdee6eb556703ddefd194af71b985ed +Author: Chris Wilson +Date: Sun Aug 26 19:47:31 2012 +0100 + + Add Option "Backlight" to override the probed backlight control interface + + The automatic selection may not correspond with the correct backlight + (such as in a multi-gpu, multi-panel device) or the user may simply + prefer another control interface. This allows them to override the + chosen interface using + + Option "Backlight" "my-backlight" + + to specify '/sys/class/backlight/my-backlight' as the interface to use + instead. + + Suggested-by: Alon Levy + References: https://bugs.freedesktop.org/show_bug.cgi?id=29273 + Signed-off-by: Chris Wilson + +commit d4f7c58186849374cd929e20fa49ea2e93939a69 +Author: Chris Wilson +Date: Sun Aug 26 17:01:55 2012 +0100 + + sna/gen5+: Use the common methods for choosing the render targets + + This should afford us much more flexibility in where we render. + + Signed-off-by: Chris Wilson + +commit 3c88b5f693c29b990d69f96508b121ce97a7209e +Author: Chris Wilson +Date: Sat Aug 25 11:49:30 2012 +0100 + + sna: Use a fast span emitter for mono trapezoids without damage or clipping + + Signed-off-by: Chris Wilson + +commit 8e10a5b348a37feadcf935ec7694e46cc0802bdf +Author: Chris Wilson +Date: Sun Aug 26 14:53:12 2012 +0100 + + sna/gen6+: Do not call sna_blt_composite() after prepping the composite op + + As sna_blt_composite() will overwrite parts of the composite op as it + checks whether or not it can execute that operation, it will lead to a + crash as the normal render path finds the op corrupt. (The BLT + conversion functions cater for the cases where we may wish to switch + pipelines after choosing src/dst bo.) + + Reported-by: rei4dan@gmail.com + Signed-off-by: Chris Wilson + +commit cbbe7727e766a5ee8767673feb6c8cdec38a7051 +Author: Chris Wilson +Date: Sun Aug 26 14:43:47 2012 +0100 + + sna/gen6+: Simplify prefer_blt_bo + + As we already check the tiling state, so all we need to then check is + that the pitch is within the BLT constraint. + + Signed-off-by: Chris Wilson + +commit 0c15824a8143a288716d2eacf03252cc54eb9466 +Author: Chris Wilson +Date: Sun Aug 26 14:29:41 2012 +0100 + + sna: Add some DBG to kgem_is_idle() + + Signed-off-by: Chris Wilson + +commit d432983421286d343f7c487c12c7244b711f5a66 +Author: Chris Wilson +Date: Sun Aug 26 13:43:35 2012 +0100 + + sna: Add some DBG to BLT composite substitute to show if redirection is used + + Signed-off-by: Chris Wilson + +commit 5a5212117e7a73ce3fffb87c60a505a849e38c36 +Author: Chris Wilson +Date: Sun Aug 26 13:38:23 2012 +0100 + + sna: Cleanup composite redirection after substituting the BLT + + Signed-off-by: Chris Wilson + +commit 335821d588460c253b2ba2c8616a7c46e5ad0150 +Author: Chris Wilson +Date: Sun Aug 26 13:29:04 2012 +0100 + + sna/gen4+: Check for allocation failure for the clear solid bo + + Signed-off-by: Chris Wilson + +commit b5c77a6aaf520e331e82409b2592911cb1bb3100 +Author: Chris Wilson +Date: Sun Aug 26 12:48:18 2012 +0100 + + 2.20.5 release + + Signed-off-by: Chris Wilson + +commit 454cc8453af1852758c3396dbe303c13c5c1be27 +Author: Chris Wilson +Date: Fri Aug 24 08:48:12 2012 +0100 + + sna: Submit the partial batch before throttling + + Signed-off-by: Chris Wilson + +commit 0e1e83ed4952f620e9422e58f955a5aea406e300 +Author: Chris Wilson +Date: Fri Aug 24 00:59:31 2012 +0100 + + sna: Allow the batch to be flushed if the GPU is idle upon a context switch + + Submit early, submit often in order to keep the GPU busy. As always we + trade off CPU overhead versus concurrency. + + Signed-off-by: Chris Wilson + +commit 5059db0697c5516f1538f7062937664baf7b1c2e +Author: Chris Wilson +Date: Fri Aug 24 00:21:07 2012 +0100 + + sna: Correct a pair of DBG messages + + Signed-off-by: Chris Wilson + +commit c5b46e411a2c738c5ae55bffb9b3d460249f5c24 +Author: Chris Wilson +Date: Thu Aug 23 17:36:10 2012 +0100 + + sna: Tidy up users of __kgem_bo_is_busy() + + A lot of callsites had not been converted to the common function. + + Signed-off-by: Chris Wilson + +commit 82e91327d57e03d2117638165f298a50b946fcaa +Author: Chris Wilson +Date: Thu Aug 23 15:59:00 2012 +0100 + + sna: Use a temporary userptr mapping for a large upload into a busy target + + Signed-off-by: Chris Wilson + +commit b286ffa6beccb8fe341c464a4fb9f2af98541263 +Author: Eric S. Raymond +Date: Thu Aug 23 12:42:18 2012 -0400 + + Fix seriously malformed list syntax on intel(4). + + Signed-off-by: Eric S. Raymond + +commit fc6b7f564df88ca773ae245b1b4e278b47dffd59 +Author: Chris Wilson +Date: Thu Aug 23 15:13:14 2012 +0100 + + sna: Flush the batch if it contains any DRI pixmaps + + This fixes a regression from + + commit 02963f489b177d0085006753e91e240545933387 + Author: Chris Wilson + Date: Sun Aug 19 15:45:35 2012 +0100 + + sna: Only submit the batch if flushing a DRI client bo + + which made the presumption that we called sna_add_flush_pixmap() for + every DRI pixmap that we used. However, that is only called for the + dirty pixmaps, any native exported pixmap only marks the batch as + requiring a flush. So in those cases we always need to submit the batch + if it contains an exported DRI pixmap. + + Reported-by: chr.ohm@gmx.net + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53967 + Signed-off-by: Chris Wilson + +commit fd38f45ec5421802b426867a050c978a2feec937 +Author: Chris Wilson +Date: Thu Aug 23 12:11:48 2012 +0100 + + sna: Mark the CPU damage as needing flushing for DRI buffers + + Signed-off-by: Chris Wilson + +commit ac6cb667546a82b865c959a1be32f52b2da7bf7d +Author: Chris Wilson +Date: Wed Aug 22 12:00:49 2012 +0100 + + sna: Flush before adding any SHM pixmap into the batch + + Signed-off-by: Chris Wilson + +commit 785c1046b94fd9ca6f22b2a6d73639408a411cea +Author: Chris Wilson +Date: Wed Aug 22 10:56:12 2012 +0100 + + sna: Only use the GPU for an active CPU bo unless forced + + Signed-off-by: Chris Wilson + +commit 8032f51859ce1928922edf6892f493a84d9c39f0 +Author: Chris Wilson +Date: Wed Aug 22 10:40:53 2012 +0100 + + sna: If we cannot use the CPU bo along a render pathway, promote to GPU + + Signed-off-by: Chris Wilson + +commit cc967507bbf357e1d5ec3cd0f3c0c5ecfa8b867a +Author: Chris Wilson +Date: Wed Aug 22 10:36:04 2012 +0100 + + sna: Convert to using IGNORE_CPU flag rather than complicating the CPU damage + + Signed-off-by: Chris Wilson + +commit 5aa59ce7c012eb309c4f5a362ccf531c065bd7ff +Author: Chris Wilson +Date: Wed Aug 22 10:10:33 2012 +0100 + + sna: Assert that the CPU bo is not used if the GPU is clear + + Signed-off-by: Chris Wilson + +commit 273765033223024ff6a662195e0e4b96f8960463 +Author: Chris Wilson +Date: Wed Aug 22 00:48:08 2012 +0100 + + sna: Make sure the opposite damage is destroyed after reducing to all + + Signed-off-by: Chris Wilson + +commit 31e398c9dbd8539e6fd2cc7398e97ee1df2f7f23 +Author: Chris Wilson +Date: Wed Aug 22 00:38:17 2012 +0100 + + sna: Discard a no-longer-used GPU bo after moving to the CPU domain + + Signed-off-by: Chris Wilson + +commit 8be15c37df9d9b34e0f21700673212bd19c772b2 +Author: Chris Wilson +Date: Wed Aug 22 00:27:00 2012 +0100 + + sna: Balance CPU bo accounting for SHM pixmaps + + Signed-off-by: Chris Wilson + +commit 262d57a5aaac46508d8e29860c7a567bcd5bc4d8 +Author: Chris Wilson +Date: Tue Aug 21 23:36:12 2012 +0100 + + sna: Display still resident memory in inactive/snoop caches under DEBUG_MEMORY + + Signed-off-by: Chris Wilson + +commit 304581cc02adeb865a24edde934b5b9ceba68d96 +Author: Chris Wilson +Date: Tue Aug 21 23:29:12 2012 +0100 + + sna: Add a DBG to log pixmap destruction + + Signed-off-by: Chris Wilson + +commit 946d54238d90f5e31772f0df336ac9a5e7f2d62b +Author: Chris Wilson +Date: Tue Aug 21 21:02:00 2012 +0100 + + sna: Fix the assertion for tracking proxies in the batch + + Signed-off-by: Chris Wilson + +commit 4ee2e227ddf61c87f08f55d4922d2562b563ca87 +Author: Chris Wilson +Date: Tue Aug 21 00:28:40 2012 +0100 + + sna: Mark all levels of a proxy as dirty + + So that if we write to a surface through one view, we make sure that the + sample cache is invalidated for all future views. + + Signed-off-by: Chris Wilson + +commit eee181e9d71273d94fe735805ed84e8f7b7b2180 +Author: Chris Wilson +Date: Tue Aug 21 00:19:10 2012 +0100 + + sna/gen6+: Only mark the dst as dirty again if it already is in the batch + + Signed-off-by: Chris Wilson + +commit c86df17c1455a53cb52f33a25c8c362e5331621e +Author: Chris Wilson +Date: Mon Aug 20 22:54:06 2012 +0100 + + sna/gen3: Fix assertion to check the freshly allocated vertex bo + + Signed-off-by: Chris Wilson + +commit 6aabe90587f4916a01a1cd2bbc577a1e7fa20eca +Author: Chris Wilson +Date: Mon Aug 20 22:09:54 2012 +0100 + + sna: Allow target bo promotion to GPU even on old architectures + + Signed-off-by: Chris Wilson + +commit 1a4b6fea7b1516de35e6800efa5b85f8401a5b2a +Author: Chris Wilson +Date: Mon Aug 20 22:08:23 2012 +0100 + + sna: Assign a unique id to snoopable CPU bo + + Signed-off-by: Chris Wilson + +commit 892b1a1e431e8f27133825f8a27dde4955da0054 +Author: Chris Wilson +Date: Mon Aug 20 22:07:05 2012 +0100 + + sna/gen3: Convert to sna_drawable_use_bo() + + Signed-off-by: Chris Wilson + +commit 3ca1bfb51ba522454433d58131e7dab7fcbe7e34 +Author: Chris Wilson +Date: Mon Aug 20 21:28:47 2012 +0100 + + sna: Trim a parameter from kgem_bo_mark_dirty() and add some assertions + + Signed-off-by: Chris Wilson + +commit 16f3d3a9ae145a3af51d2c0c42c6c585d676a863 +Author: Chris Wilson +Date: Mon Aug 20 19:42:22 2012 +0100 + + sna: Keep a stash of the most recently allocated requests + + Signed-off-by: Chris Wilson + +commit fb349ced91e15ecaa025321bd37d1fe3cfdd2f44 +Author: Chris Wilson +Date: Mon Aug 20 17:35:44 2012 +0100 + + sna: A few more buffer cache management assertions + + Signed-off-by: Chris Wilson + +commit ae6b3c7508d570af94f172d6a91d62d2987d654b +Author: Chris Wilson +Date: Mon Aug 20 17:03:16 2012 +0100 + + Check that the module that indeed i915 before using custom ioctls + + Thanks to Adam Jackson for pointing me towards drmGetVersion() and + Julien Cristau for saying "Yuck!" + + Signed-off-by: Chris Wilson + +commit 3c611087e8ae09fc3fe4271f16d912ac8ae89f6b +Author: Chris Wilson +Date: Mon Aug 20 16:09:25 2012 +0100 + + Only open the matching BusID and not the first named + + If you pass a name to drmOpen() it will attempt to open any device + corresponding to that name if it first fails to open the device + corresponding to the BusID. Obviously we want the failure from opening + the specified device in order to prevent wrongly opening the first found + device multiple times. + + Signed-off-by: Chris Wilson + +commit dd6c67b32f726b6ad7f12f3b83f6d8c868ff4dc1 +Author: Chris Wilson +Date: Mon Aug 20 15:58:03 2012 +0100 + + sna: Add a couple of buffer cache management assertions + + Signed-off-by: Chris Wilson + +commit 01ebdb4d7a8bb751167153554f9122d996e4ea91 +Author: Chris Wilson +Date: Mon Aug 20 15:33:26 2012 +0100 + + sna: Remove confusing is_cpu() + + The only real user now has its own heuristics, so convert the remaining + users over to !is_gpu(). + + Signed-off-by: Chris Wilson + +commit 410316d20299b9ed3447d1d897f904af786ed097 +Author: Chris Wilson +Date: Mon Aug 20 14:56:12 2012 +0100 + + sna: Refine decision making for maybe-inplace trapezoids + + In particular, we want to avoid preferentially taking the CPU paths + when it may force any migration (including clear). + + Signed-off-by: Chris Wilson + +commit 91f1bf971f9cdc6498f513a5ddec1ad7a4e24b3d +Author: Chris Wilson +Date: Mon Aug 20 15:27:27 2012 +0100 + + sna: Correct ordering of calls to memcpy for BLT cpu composite paths + + Signed-off-by: Chris Wilson + +commit 027569bf83fc6d67dca7cfd65fdfa37ef6b47204 +Author: Chris Wilson +Date: Mon Aug 20 12:55:20 2012 +0100 + + Missing includes for b5b76ad849b + + The warnings of implicit function declarations were lost amongst the + noise. + + Signed-off-by: Chris Wilson + +commit f1b259f627814c765ea93d8c839ee7533249974f +Author: Chris Wilson +Date: Mon Aug 20 12:51:51 2012 +0100 + + sna: Add a modicum of DBG for PolyFillRect + + Signed-off-by: Chris Wilson + +commit b5b76ad849bfda1e75192d1cb3c6c0fcc623bb91 +Author: Chris Wilson +Date: Mon Aug 20 12:01:39 2012 +0100 + + Sanity check that the driver is an i915.ko GEM device before claiming it + + This fixes an issue with us claiming Poulsbo and friends even though we + do not speak their language. + + Signed-off-by: Chris Wilson + +commit 74f998136bac441d782faf779616af6f7bdcadad +Author: Chris Wilson +Date: Mon Aug 20 11:07:55 2012 +0100 + + sna: Avoid migrating the BLT composite src to the GPU if the dst is not + + Signed-off-by: Chris Wilson + +commit a05643eb670e91ab102465df799301def88faaf9 +Author: Chris Wilson +Date: Mon Aug 20 10:46:14 2012 +0100 + + sna: Remove unneeded source bo unref after __sna_render_pixmap_bo() + + As __sna_render_pixmap_bo() deliberately does not reference its returned + bo, we need to avoid unreferencing it else we cause explosions later. + + Fixes regression from commit a13781d19defc97af6a279c11a85e33ef825020e + Author: Chris Wilson + Date: Sun Aug 19 09:45:12 2012 +0100 + + sna: Enable BLT composite functions to target CPU buffers + + Signed-off-by: Chris Wilson + +commit c80db9bc2ef0a37a4abb78c9ef667c8b36ab6fba +Author: Chris Wilson +Date: Mon Aug 20 10:45:36 2012 +0100 + + sna: Flush the batch before preparing for a FlushCallback + + As we end up submitting and maybe synchronising upon a batch within + FlushCallback (or our client will) it is important that we start that + serialized batch as early as possible to minimise the impending stalls. + + Signed-off-by: Chris Wilson + +commit c39fe0253847f5a86e16b47ba420c8ba819c9110 +Author: Chris Wilson +Date: Sun Aug 19 20:42:55 2012 +0100 + + sna: Do not use the GPU to migrate to the CPU whilst wedged! + + Signed-off-by: Chris Wilson + +commit fe05268d70088c8cad5f4b5ef756e1ffe2069fca +Author: Chris Wilson +Date: Sun Aug 19 19:28:42 2012 +0100 + + sna: Experiment with flushing the batch prior to rendering to a ShmPixmap + + Signed-off-by: Chris Wilson + +commit bbd7a825810cc9772e6d613df449cb5ecb0be3f6 +Author: Chris Wilson +Date: Sun Aug 19 19:28:20 2012 +0100 + + sna: Don't promote a ShmPixmap to GPU for a CopyArea + + Signed-off-by: Chris Wilson + +commit 7bf7a5ad1057f1aeb5b261da6dc501323c022287 +Author: Chris Wilson +Date: Sun Aug 19 19:17:35 2012 +0100 + + sna/gen3: Tidy vbo discard + + Signed-off-by: Chris Wilson + +commit d1b808fd72b477bde96f7c6737a993bd1a20baf2 +Author: Chris Wilson +Date: Sun Aug 19 17:53:24 2012 +0100 + + sna: Tweak is_cpu/is_gpu heuristics + + Signed-off-by: Chris Wilson + +commit c682c1a37692021cbd9bfc1e3f1ccf2b648c73f9 +Author: Chris Wilson +Date: Sun Aug 19 17:28:25 2012 +0100 + + sna: Discard GPU (and damage) after applying clear on migration to CPU + + Signed-off-by: Chris Wilson + +commit dc83ef49f9e8ff94ab77aa9d54fe29e32b9d7a3d +Author: Chris Wilson +Date: Sun Aug 19 17:20:45 2012 +0100 + + sna/trapezoids: Accept more operators for maybe-inplace + + Signed-off-by: Chris Wilson + +commit 47d948f5df0cd0e975cfe5183b6ce79cd3fd27ee +Author: Chris Wilson +Date: Sun Aug 19 17:09:21 2012 +0100 + + sna: Update maybe_inplace to recognise more types of handled pixel formats + + Signed-off-by: Chris Wilson + +commit 02963f489b177d0085006753e91e240545933387 +Author: Chris Wilson +Date: Sun Aug 19 15:45:35 2012 +0100 + + sna: Only submit the batch if flushing a DRI client bo + + Signed-off-by: Chris Wilson + +commit 13d1a105159222518800d3c5ad5660725864ec6b +Author: Chris Wilson +Date: Sun Aug 19 09:48:05 2012 +0100 + + sna: compare the correct trailing dword when skipping identical bitmap lines + + Fixes regression in 2.20.4 from + + commit 85192f00e345830541e3715e211b1f98154bbef4 + Author: Chris Wilson + Date: Wed Aug 8 12:11:50 2012 +0100 + + sna: Ignore trailing bits when comparing lines inside the bitmap + + Reported-by: Edward Sheldrake + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53699 + Signed-off-by: Chris Wilson + +commit a13781d19defc97af6a279c11a85e33ef825020e +Author: Chris Wilson +Date: Sun Aug 19 09:45:12 2012 +0100 + + sna: Enable BLT composite functions to target CPU buffers + + Signed-off-by: Chris Wilson + +commit be940856c74fbedd27997dd61e2a85959b321193 +Author: Chris Wilson +Date: Sat Aug 18 21:23:03 2012 +0100 + + sna: Consider sample wraparound in each direction independently + + Signed-off-by: Chris Wilson + +commit 110c7ef7f6c31929affa038918e6ce087bccddc6 +Author: Chris Wilson +Date: Sat Aug 18 17:42:51 2012 +0100 + + sna/damage: Replace the damage with a larger box if subsumed + + Signed-off-by: Chris Wilson + +commit 75a2fab766d8aed180ef795919e503db22c0e0fd +Author: Chris Wilson +Date: Sat Aug 18 17:28:08 2012 +0100 + + sna: Avoid forcing an upload for an unblittable bo unless on a fallback path + + Signed-off-by: Chris Wilson + +commit 110d5519f3523b1e2c50db637cdc4c5bc44c960a +Author: Chris Wilson +Date: Sat Aug 18 16:39:52 2012 +0100 + + sna: Reduce subtracted damage earlier + + Signed-off-by: Chris Wilson + +commit 8812e8b6e89e6432a6a768a0566ce4c153e9b256 +Author: Chris Wilson +Date: Sat Aug 18 16:21:13 2012 +0100 + + sna: Reduce damage after a large composite operation + + Signed-off-by: Chris Wilson + +commit e361627b90ea6bf2f9a8c46cf8debe562fdf4f09 +Author: Chris Wilson +Date: Sat Aug 18 16:16:17 2012 +0100 + + sna/damage: Add some more sanity checks for creating empty regions + + Signed-off-by: Chris Wilson + +commit 10f334872e9dd190e18c768219e60815acabe4d3 +Author: Chris Wilson +Date: Sat Aug 18 15:49:02 2012 +0100 + + sna: Add damage for the whole unaligned trapezoid not per component + + Signed-off-by: Chris Wilson + +commit 5ff6198c9346d84717bac28980329b048f4406e8 +Author: Chris Wilson +Date: Sat Aug 18 11:59:56 2012 +0100 + + 2.20.4 release + + Signed-off-by: Chris Wilson + +commit bc77a466531fdbdd21e9354af567e5215a66edf9 +Author: Chris Wilson +Date: Sat Aug 18 11:09:23 2012 +0100 + + sna: Silence a couple of recent compiler warnings + + sna_accel.c: In function 'sna_poly_fill_rect_extents': + sna_accel.c:11438:11: warning: unused variable 'v' [-Wunused-variable] + + sna_blt.c: In function 'sna_blt_composite__convert': + sna_blt.c:1712:3: warning: format '%s' expects a matching 'char *' argument [-Wformat] + sna_blt.c:1738:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'CARD32' [-Wformat] + + Signed-off-by: Chris Wilson + +commit d1da2c71461798bb027a260ff8480b71ebffde26 +Author: Chris Wilson +Date: Thu Aug 16 21:15:54 2012 +0100 + + sna: Correct assertion for StoreColors + + Fixing the assertion reveals that it was bogus! + + Signed-off-by: Chris Wilson + +commit 31ddaa0cfbde083aef42d9fdb5ed13bb4edc36c8 +Author: Chris Wilson +Date: Thu Aug 16 21:13:52 2012 +0100 + + sna: Fixup DBG after 7f5a9e3 + + Signed-off-by: Chris Wilson + +commit b8bc56c12c6fdc559354fbbf96b6e043a491aa8f +Author: Chris Wilson +Date: Thu Aug 16 21:00:57 2012 +0100 + + uxa/gen3: Simply simple fill shader generation + + Suggested-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 182581edde356a21a0681de526f83884e1a0de5d +Author: Chris Wilson +Date: Thu Aug 16 20:59:09 2012 +0100 + + uxa/glamor: Check for failed prepares + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit c289b607d1526d8d3625fa84c093552a9f3ea168 +Author: Chris Wilson +Date: Thu Aug 16 20:54:40 2012 +0100 + + uxa: Check for failed mmapping of the scanout + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 32ec8b979bc8cf7d8ce351ca752b806d42bc1c0f +Author: Chris Wilson +Date: Thu Aug 16 20:53:08 2012 +0100 + + test/dri2: Discard error returns from _XReply + + This is only test code, so keep the static analyser quiet + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 5675c36e0dca92b8d24235d82cd0e87f82fdc7b0 +Author: Chris Wilson +Date: Thu Aug 16 20:44:32 2012 +0100 + + sna: Check for failure to pin the front buffer + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit c9db2c74ab3b482489bec63b11df80bb35e21aca +Author: Chris Wilson +Date: Thu Aug 16 20:42:50 2012 +0100 + + sna/gen2: Add break rather than fallthrough + + The fall-through in this instance is irrelevant, and the static + analysers complain for not commenting on the fall-through. Silence the + analyser by removing the fall-through. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit e0abbc3ccafb51d6b2114e1c7d6dc2eda3a8c1f4 +Author: Chris Wilson +Date: Thu Aug 16 20:40:17 2012 +0100 + + i810: Query PortPriv for the surface properties + + Avoid the NULL deferences. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit c09518f98d5c533860b084506d9ee2c819cca52f +Author: Chris Wilson +Date: Thu Aug 16 20:32:53 2012 +0100 + + sna: Fix assignment inside assertion (should be an equality check) + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 7d3e4328d4f4421178377933ca98fb80daa85c76 +Author: Chris Wilson +Date: Thu Aug 16 20:32:11 2012 +0100 + + sna/glyphs: Fix potential leak of glyph extents (for many lists of many formats) + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 9b00c82df78cb8820c0e32fbecc7c933eed81d52 +Author: Chris Wilson +Date: Thu Aug 16 20:30:52 2012 +0100 + + sna: Remember alpha-fixup for BLT upload + + Still dubious whether this is truly beneficial... + + Signed-off-by: Chris Wilson + +commit 94871944a0e1351273d6029df7bf0300f31a8571 +Author: Chris Wilson +Date: Thu Aug 16 00:07:58 2012 +0100 + + sna: Avoid conflating tearfree and randr shadow modes + + For ordinary TearFree we do not want to adjust the crtc offsets. + + Signed-off-by: Chris Wilson + +commit 1a389842347bab9d91240444e161589071eb9a47 +Author: Chris Wilson +Date: Wed Aug 15 23:07:16 2012 +0100 + + sna: Avoid queuing a pageflip on a DPMS off pipe + + If the pipe is not running, attempting to queue a pageflip will result + in an error and us disabling the output in retaliation. + + Signed-off-by: Chris Wilson + +commit 615739556dd1cc4565eb1c47f93fe8abd697802f +Author: Chris Wilson +Date: Wed Aug 15 20:10:52 2012 +0100 + + sna: Only continue to update the shadow buffer if the flips succeeded + + If the flip fail, we disable the crtc and may end up disabling the + output, removing the shadow (and old scanout bo) in the process. + + Signed-off-by: Chris Wilson + +commit 2554d0d76e0fcae6e324938c28bb50deeb8814dc +Author: Chris Wilson +Date: Wed Aug 15 18:04:18 2012 +0100 + + sna: Submit the batch upon destroying a ShmPixmap + + The midlayer has already detached the pixmap from the segment (possibly + destroying that segment in the process, thanks midlayer!) so we need to + submit the batch asap before the segment disappears. + + Signed-off-by: Chris Wilson + +commit 4e604d721be5a1c0f8eaf91e3a5cf8c01a609a69 +Author: Chris Wilson +Date: Wed Aug 15 16:53:20 2012 +0100 + + sna: Flush shm pixmaps after upload + + Signed-off-by: Chris Wilson + +commit 7f5a9e30c953c174a4d6bc83e0b0a5e068cbda52 +Author: Chris Wilson +Date: Wed Aug 15 09:34:24 2012 +0100 + + sna: Remove zero-size rectangles fro PolyFillRectangle + + Some applications like to waste precious bw by attempting to fill + zero-sized rectangles; remove them upfront rather than process them. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 0c882f4fa991ef379e416628eb41cd2178818ad1 +Author: Chris Wilson +Date: Tue Aug 14 16:02:38 2012 +0100 + + sna/gen2,3: Prevent dereferencing a NULL bo with solid render fills + + Signed-off-by: Chris Wilson + +commit 48f436d3705059711097a222aac65f862b4a5cfd +Author: Chris Wilson +Date: Tue Aug 14 15:05:33 2012 +0100 + + sna: Defer the release of a busy SHM pixmap until the next flush callback + + Signed-off-by: Chris Wilson + +commit 9f07d1fc0181f22da36837337241f228626e0d88 +Author: Chris Wilson +Date: Tue Aug 14 12:03:24 2012 +0100 + + sna: Enable use of shm pixmap for readback + + A little too overzealous in the degradation of writing to the CPU bo + if we need to read from a GPU bo. + + Signed-off-by: Chris Wilson + +commit 9b016d2e466f342cc6649504fa48ab6a810c7e94 +Author: Chris Wilson +Date: Sun Aug 12 21:36:30 2012 +0100 + + sna: do not bother attaching to a miniscule ShmPixmap + + If the pixmap is less than a page in size we are unlikely to recover the + cost of tracking it via the GPU. + + Signed-off-by: Chris Wilson + +commit 2f4de90709264ad19a3e3f5f0f79f4bba78a760a +Author: Chris Wilson +Date: Sun Aug 12 13:01:24 2012 +0100 + + uxa: Only emit a warning if we fail to tile the frontbuffer and the hw allows + + Signed-off-by: Chris Wilson + +commit 4d3cafc99ab49da6744046bc2004981144cb064d +Author: Chris Wilson +Date: Sun Aug 12 13:02:43 2012 +0100 + + sna: Fix compilation without pixman glyphs + + Signed-off-by: Chris Wilson + +commit dc18eaa585c36c8e5f5b4ec405a976a835fd2ac3 +Author: Chris Wilson +Date: Sun Aug 12 10:34:10 2012 +0100 + + sna: Make the failure to create render caches non-fatal + + Signed-off-by: Chris Wilson + +commit b580abdfa68108f3e63ee1f897b6ea83b9c47935 +Author: Dave Airlie +Date: Sun Aug 12 20:52:12 2012 +1000 + + intel: fix video xvPipe range check + + Pointed out by Russell King on irc. + + Signed-off-by: Dave Airlie + +commit 44f848f9b2f2a2dcd9087210ea46bc4fdb63c057 +Author: Chris Wilson +Date: Sat Aug 11 19:44:15 2012 +0100 + + sna: Fix typo in computation of texel offsets for tiled 8x8 blts + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53353 + Signed-off-by: Chris Wilson + +commit b335d369bbcbfaef878795a5c8e72c2d40d3a536 +Author: Chris Wilson +Date: Sat Aug 11 12:59:49 2012 +0100 + + sna: Discard the GPU bo after syncing to CPU bo for writing + + Signed-off-by: Chris Wilson + +commit 029934662e0bad6cf47baf4d7202656dd3e0ba08 +Author: Chris Wilson +Date: Sat Aug 11 10:47:44 2012 +0100 + + sna: Add a little DBG for promotion of CPU source bo + + Signed-off-by: Chris Wilson + +commit f20f8556bfc8b4df6ba5050cca656a4ff0fdf18f +Author: Chris Wilson +Date: Sat Aug 11 10:46:40 2012 +0100 + + sna: Treat ShmPixmap as ordinary + + In theory the code handles the automatic promotion and demotion of the + GPU buffers. + + Signed-off-by: Chris Wilson + +commit 16c751a06c503b85c5ab6588bae277af4348487d +Author: Chris Wilson +Date: Sat Aug 11 10:44:08 2012 +0100 + + sna: Only mark userptr bo as snooped on non-LLC architectures + + Signed-off-by: Chris Wilson + +commit 59359dba6496229eff7c60dd04536c5add69cec8 +Author: Chris Wilson +Date: Sat Aug 11 10:25:40 2012 +0100 + + sna: Mark SHM userptr bo as unreusable + + Signed-off-by: Chris Wilson + +commit 64488010504a6e76008bb3b3c1e61caeb025913c +Author: Chris Wilson +Date: Sat Aug 11 10:21:39 2012 +0100 + + sna/gen2-5: Substitute an equivalent BLT composite operation + + Signed-off-by: Chris Wilson + +commit f464d508c870293699616626d64bd64f16051467 +Author: Chris Wilson +Date: Sat Aug 11 10:10:32 2012 +0100 + + sna/gen6+: Try to use the BLT to avoid TLB misses + + Signed-off-by: Chris Wilson + +commit e9c0e54e69a5ce93bb4e79d56da4a83fddf49c4e +Author: Chris Wilson +Date: Sat Aug 11 08:58:14 2012 +0100 + + sna: Handle userptr failures more gracefully + + Signed-off-by: Chris Wilson + +commit 5d6d9231cd2003fda1c6f2dd3174014317a45704 +Author: Chris Wilson +Date: Fri Aug 10 23:07:07 2012 +0100 + + sna: Reset BLT state after copy-boxes + + Signed-off-by: Chris Wilson + +commit 50bfc172f1f89c023bb3a47418b845e31eba7126 +Author: Chris Wilson +Date: Fri Aug 10 22:49:26 2012 +0100 + + sna: Improve a DBG statement + + Signed-off-by: Chris Wilson + +commit b33f6754a99f6d11e423d6a03739fa2c04eeed88 +Author: Chris Wilson +Date: Fri Aug 10 21:59:36 2012 +0100 + + sna: Add assertions to 8x8 tiled BLTs and reset BLT state afterwards + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=53353 + Signed-off-by: Chris Wilson + +commit ff54d4af39edcddd55f597c404ab6dd548a24aa9 +Author: Chris Wilson +Date: Fri Aug 10 21:41:38 2012 +0100 + + sna: Add a couple of debug options to control use of BLT patterns + + References: https://bugs.freedesktop.org/show_bug.cgi?id=53353 + Signed-off-by: Chris Wilson + +commit 22306144030b5d37df6d46321555bced6e33c50c +Author: Chris Wilson +Date: Wed Aug 8 19:45:09 2012 +0100 + + sna: Use the HAS_SEMAPHORES parameter when available + + Signed-off-by: Chris Wilson + +commit 465ae1840a883c50d5a5aab7380b30527f00e17b +Author: Chris Wilson +Date: Wed Aug 8 12:23:25 2012 +0100 + + sna: Use a compile time constant for determine the zeroth bit + + Signed-off-by: Chris Wilson + +commit 85192f00e345830541e3715e211b1f98154bbef4 +Author: Chris Wilson +Date: Wed Aug 8 12:11:50 2012 +0100 + + sna: Ignore trailing bits when comparing lines inside the bitmap + + References: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + Signed-off-by: Chris Wilson + +commit edc1427f3dcddb73acdb5b5e03756ecb30cb3797 +Author: Chris Wilson +Date: Wed Aug 8 10:53:40 2012 +0100 + + sna/gen5: Add DBG for context switching + + Signed-off-by: Chris Wilson + +commit fec78ddc60b1f03097b334672546c2c7ef21ab4f +Author: Chris Wilson +Date: Wed Aug 8 10:08:52 2012 +0100 + + sna: Add DBG option to disable discarding of glyph masks + + Signed-off-by: Chris Wilson + +commit b0cd430082d219500729d20c4740440e58773892 +Author: Chris Wilson +Date: Wed Aug 8 10:07:06 2012 +0100 + + sna/gen5: Fix use of uninitialised rgba value for DBG + + Signed-off-by: Chris Wilson + +commit 9ad923f95c59cdf42363f95c7dd52188c0987296 +Author: Chris Wilson +Date: Wed Aug 8 09:59:50 2012 +0100 + + sna: Minor DBG for fallback glyphs and discarding the mask + + Signed-off-by: Chris Wilson + +commit 1a0590d133ea6991e0939d1f170f9c10df6856a0 +Author: Chris Wilson +Date: Tue Aug 7 17:16:35 2012 +0100 + + sna: Check the composite extents against the clip + + When computing the composite extents (as opposed to the composite + region) also check if the resultant box overlaps the destination clip + region (we know it already fits into the extents). This helps in cases + with small roi against clipped drawables, such as drawing text onto + expose events. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=51422 + Signed-off-by: Chris Wilson + +commit 5f5a10ef04a8c01b22da2284583851d84273dc2a +Author: Paulo Zanoni +Date: Mon Aug 6 18:48:09 2012 -0300 + + Add Haswell PCI IDs + + Signed-off-by: Paulo Zanoni + Reviewed-by: Rodrigo Vivi + Signed-off-by: Chris Wilson + +commit d8f7f933bc2d30e529730521d5628c10df0361de +Author: Chris Wilson +Date: Sun Aug 5 17:18:54 2012 +0100 + + sna: Format markup to suppress compiler warning + + Signed-off-by: Chris Wilson + +commit 4d0a259988f67f5c569c5d8000c010a7b662efd3 +Author: Chris Wilson +Date: Sat Aug 4 15:54:19 2012 +0100 + + sna/gen6: Compile fix for DBG + + Signed-off-by: Chris Wilson + +commit d917a276bff4e933590e78404526b929b6b3b497 +Author: Chris Wilson +Date: Sat Aug 4 18:05:03 2012 +0100 + + sna/gen4: Restore the w/a flush for fill/copy as well + + So far, it looks like that the only one we can indeed drop is the + composite with mask. + + Signed-off-by: Chris Wilson + +commit d754bc3435889b5d19085588c9c888dc08f9522e +Author: Cyril Brulebois +Date: Mon Nov 7 23:29:29 2011 +0100 + + Fix build failure when passing --with-builderstring. + + If --with-builderstring="foo" is passed to configure (and sna enabled): + CC sna_driver.lo + src/sna/sna_driver.c: In function 'sna_init_scrn': + src/sna/sna_driver.c:1023:7: error: token ""foo"" is not valid in preprocessor expressions + + Fix the missing defined() around the BUILDER_DESCRIPTION variable. + + Signed-off-by: Cyril Brulebois + +commit 4bad76b4510d8cf4ccf3f64bcd13ebb80fae4d26 +Author: Chris Wilson +Date: Sat Aug 4 14:28:41 2012 +0100 + + sna/dri: Don't force ring selection if we have semaphores + + Signed-off-by: Chris Wilson + +commit fb7b584ec9d0ea96175ba3a621699378c6724940 +Author: Chris Wilson +Date: Sat Aug 4 14:27:46 2012 +0100 + + sna/dri: Correct ring selection for a busy bo + + Confused the RENDER ring with the BLT, limiting swap performance. + + Signed-off-by: Chris Wilson + +commit 20e58077fe071fd03d44a97194aa163376dc46a4 +Author: Chris Wilson +Date: Sat Aug 4 11:21:10 2012 +0100 + + sna/gen6: Reduce ring switching for overlapping copy boxes + + Signed-off-by: Chris Wilson + +commit 2345227663f443baa3c30bdf8b8c33827b7f4947 +Author: Chris Wilson +Date: Sat Aug 4 11:12:12 2012 +0100 + + sna/gen7: Use a temporary to avoid switching rings for overlapping copies + + Signed-off-by: Chris Wilson + +commit 61ec2999afd5dad22580e024421f13afe7c82f3a +Author: Chris Wilson +Date: Sat Aug 4 10:33:05 2012 +0100 + + sna/gen4: Restore w/a flush for video + + One flush removal too many, keep those fingers crossed that the others + do not make an unwanted return. + + Reported-by: Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53119 + Signed-off-by: Chris Wilson + +commit 5833ef173a01afb710acf10e806b83c5ca6efc09 +Author: Chris Wilson +Date: Sat Aug 4 09:31:41 2012 +0100 + + 2.20.3 release + + Signed-off-by: Chris Wilson + +commit 036b90f099af21e60fb4c3684616daf1927f705e +Author: Chris Wilson +Date: Fri Aug 3 21:41:59 2012 +0100 + + sna/gen7: Correct number of texture coordinates used for video + + Fixes regresion from + + commit 33c028f8be829caa4fdb9416ff177dc71f24b68e + Author: Chris Wilson + Date: Wed Aug 1 01:17:50 2012 +0100 + + sna/gen6+: Reduce floats-per-vertex for spans + + Signed-off-by: Chris Wilson + +commit 05dcc5f1699ba90fc14c50882e8d4be89bc4a4f9 +Author: Chris Wilson +Date: Fri Aug 3 15:08:45 2012 +0100 + + Pass the chipset info through driverPrivate rather than a global pointer + + Signed-off-by: Chris Wilson + +commit 2b3f4ca33a00440a7005fef69099f8dbaddbbad1 +Author: Chris Wilson +Date: Fri Aug 3 14:27:51 2012 +0100 + + Unexport intel_chipsets + + Only used by the core module code, so make it static. + + Signed-off-by: Chris Wilson + +commit 5ff749727d3590368806508ac0d0fa8efd1d1d51 +Author: Chris Wilson +Date: Wed Jul 25 22:21:29 2012 +0100 + + sna/gen7: Add constant variations and hookup a basic GT descriptor for Haswell + + Signed-off-by: Chris Wilson + +commit cd028cad3dc9b059a3d83b818d581f86e16ec317 +Author: Chris Wilson +Date: Thu Jul 26 13:17:11 2012 +0100 + + sna: Limit the batch size on all gen7 variants + + Seems the limit on the surface state size is common across the family + + Signed-off-by: Chris Wilson + +commit 4cd9ec9d404d934268952a1058afa07741b09efe +Author: Gwenole Beauchesne +Date: Fri May 4 18:26:46 2012 +0200 + + uxa: fix 3DSTATE_PS to fill in number of samples for Haswell + + The sample mask value must match what is set for 3DSTATE_SAMPLE_MASK, + through gen6_upload_invariant_states(). + + Signed-off-by: Gwenole Beauchesne + Reviewed-by: Kenneth Graunke + +commit 412668464cf9505629eac20001701af3402dc6e8 +Author: Gwenole Beauchesne +Date: Fri May 4 17:55:10 2012 +0200 + + uxa: set "Shader Channel Select" fields in surface state for Haswell + + For normal behaviour, each Shader Channel Select should be set to the + value indicating that same channel. i.e. Shader Channel Select Red is + set to SCS_RED, Shader Channel Select Green is set to SCS_GREEN, etc. + + Signed-off-by: Gwenole Beauchesne + Reviewed-by: Kenneth Graunke + +commit a47ba68996f117fabcb601d35bcc5f99cbcd6122 +Author: Gwenole Beauchesne +Date: Fri May 4 17:17:22 2012 +0200 + + uxa: fix max PS threads shift value for Haswell + + The maximum number of threads is now a 9-bit value. Thus, one more bit + towards LSB was re-used. i.e. bit position is now 23 instead of 24 on + Ivy Bridge. + + Signed-off-by: Gwenole Beauchesne + Reviewed-by: Kenneth Graunke + +commit ce4421e175ceb9259208c7c223af8d66282c3db3 +Author: Gwenole Beauchesne +Date: Fri May 4 17:09:19 2012 +0200 + + uxa: use at least 64 URB entries for Haswell + + Signed-off-by: Gwenole Beauchesne + Reviewed-by: Kenneth Graunke + +commit 8c880aa34c522b0d67cbb932771f00c947d00dec +Author: Gwenole Beauchesne +Date: Fri May 4 17:43:19 2012 +0200 + + uxa: add IS_HSW() macro to distinguish Haswell from Ivybridge + + Signed-off-by: Gwenole Beauchesne + +commit 0c0d1d956a8ba37d9e6f4a5e4f52018c8ce498e5 +Author: Gwenole Beauchesne +Date: Fri Aug 3 12:03:00 2012 +0100 + + Introduce a chipset identifier for Haswell (Ivybridge successor) + + Signed-off-by: Gwenole Beauchesne + +commit 146959dd5ef28384a3db4fce4bf7840f2b3ec58c +Author: Chris Wilson +Date: Wed Aug 1 23:43:15 2012 +0100 + + sna: Drop the clear flag as we discard the GPU damage + + Hopefully only to keep the sanity checks happy... + + Signed-off-by: Chris Wilson + +commit 7404e3085b2ee36fa24f77a02d156b4b1d2dff60 +Author: Chris Wilson +Date: Wed Aug 1 23:37:35 2012 +0100 + + sna: Ensure we only mark a clear for a fill on the GPU bo + + Signed-off-by: Chris Wilson + +commit ca46d1c7a18596ea9fe2b0577ccf1d110e3e42ac +Author: Chris Wilson +Date: Wed Aug 1 20:20:29 2012 +0100 + + sna/gen7: Prefer the BLT for self-copies + + Looking at the test results for a third time, gives the edge to the BLT + again. + +commit e4a3cd3d16447b5d83d1c8c63c342f1240935267 +Author: Chris Wilson +Date: Wed Aug 1 17:37:33 2012 +0100 + + sna: Add validation of the clear flag to pixmap debugging + + Signed-off-by: Chris Wilson + +commit eaeda34bef711cc566f51dee092a19a3c4ac1a16 +Author: Chris Wilson +Date: Wed Aug 1 16:23:05 2012 +0100 + + sna: Fix computation of st values for SIMD8 dispatch + + Fixes regression with enabling 8-pixels. + + Reported-by: Mehran Kholdi + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53044 + Signed-off-by: Chris Wilson + +commit 55231eca818c82620c0146384b19b5d5659f6cd6 +Author: Chris Wilson +Date: Wed Aug 1 16:22:23 2012 +0100 + + sna/gen6: Install a fallback 16-pixel shader + + In case the DBG options leave no shader compiled, make sure we always + supply one. + + Signed-off-by: Chris Wilson + +commit 4e79c1fef064ce68914eb644edd7f588be3d7300 +Author: Chris Wilson +Date: Wed Aug 1 15:58:43 2012 +0100 + + Revert "sna/gen7: Prefer the BLT for self-copies" + + This reverts commit 89e75dbcb6749bde7587ecc08abed276c255e7f9. + + Having removed the forced stall for a RENDER self-copy there is no + longer a need to encourage ring switching. + + Signed-off-by: Chris Wilson + +commit 85cef78a40c6a7a0254f8fba685f224eac6038e1 +Author: Chris Wilson +Date: Wed Aug 1 13:39:36 2012 +0100 + + sna/gen7: Simplify the force-stall detection + + After reducing the number of conditions where we think we need to force + the stall on the results, we can then simplify the code to detect + that remaining case. + + Signed-off-by: Chris Wilson + +commit 9391a2c71f020541a2a62ae68eadd486216a38df +Author: Chris Wilson +Date: Wed Aug 1 12:50:32 2012 +0100 + + sna/gen7: Only force a stall for a dirty target if also used as a blend source + + Signed-off-by: Chris Wilson + +commit 0a4bb8663b9fa9b39d13bfb49aea30f2aaecce78 +Author: Chris Wilson +Date: Wed Aug 1 11:19:27 2012 +0100 + + sna/gen4: Flush not required between fill vertices, only nomaskcomposite + + A small breakthrough... Still need to flush the primitive between state + changes though. + + Signed-off-by: Chris Wilson + +commit 33c028f8be829caa4fdb9416ff177dc71f24b68e +Author: Chris Wilson +Date: Wed Aug 1 01:17:50 2012 +0100 + + sna/gen6+: Reduce floats-per-vertex for spans + + Signed-off-by: Chris Wilson + +commit 9b2873d3d97b6780d878bd9b821fba0302470f9f +Author: Chris Wilson +Date: Wed Aug 1 00:01:15 2012 +0100 + + sna/gen4+: Implement an opacity shader + + Avoid the cumbersome lookup through the alpha gradient texture and + simply multiply the incoming opacity value. The next step will be to + reduce the number of floats required per vertex. + + Now that we have removed the primary user of the alpha solid cache, it + may be time to retire that as well. + + Signed-off-by: Chris Wilson + +commit fd3a1236051265fab700aad689a171de47d7338f +Author: Chris Wilson +Date: Tue Jul 31 10:20:51 2012 +0100 + + sna/gen6: Enable 8 pixel dispatch + + This gives a small performance increase when operating with rectangles, + which is reasonably frequent. + + Signed-off-by: Chris Wilson + +commit 8922b804bc9ed27957c81f7cda4812ab4ecbd4de +Author: Chris Wilson +Date: Tue Jul 31 10:20:51 2012 +0100 + + sna/gen7: Enable 8 pixel dispatch + + This gives a small performance increase when operating with rectangles, + which is reasonably frequent. + + Signed-off-by: Chris Wilson + +commit 492093d04b1486dd34aafe2f109a77ddeb836f18 +Author: Chris Wilson +Date: Tue Jul 31 18:39:17 2012 +0100 + + sna: Generate shaders for SNB+ 8-pixel dispatch + + Not ideal yet, sampling an alpha-only surface using SIMD8 only seems to + ever return 0... + + Signed-off-by: Chris Wilson + +commit 6a5ed88f9fab654c9c11c566b841d42150d26c5d +Author: Chris Wilson +Date: Mon Jul 30 17:08:20 2012 +0100 + + sna/gen4: Tidy debugging code + + Cluster the ifdefs together in the initialisation code. + + Signed-off-by: Chris Wilson + +commit 46ec9b0ed55d0fcade40f92206e59c02e402d870 +Author: Chris Wilson +Date: Tue Jul 31 17:41:34 2012 +0100 + + sna: Update DPMS mode on CRTC after forcing the outputs on + + If we forcibly update the outputs to be on, then the core will not issue + its on DPMS event and we miss out on updating the CRTC bookkeeping in + sna_crtc_dpms(). So we need to update the flag on the CRTC as we + manipulate the outputs during modesetting. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=52142 + Signed-off-by: Chris Wilson + +commit 8f166d26b8a93592939068c5a8d160981c724cfd +Author: Chris Wilson +Date: Tue Jul 31 11:58:24 2012 +0100 + + sna: Be more careful with damage reduction during CompositeRectangles + + We actually need to force DAMAGE_ALL in case we are promoting the GPU + pixmap. + + Signed-off-by: Chris Wilson + +commit e6cb5d93eaa01e7f4763f797bba341f3cc481d98 +Author: Chris Wilson +Date: Mon Jul 30 11:14:58 2012 +0100 + + sna: Avoid overlapping gpu/cpu damage with IGNORE_CPU + + We cannot simply ignore the presence of CPU damage with IGNORE_CPU but + must remember to discard it. + + Signed-off-by: Chris Wilson + +commit c9805ba98775bb1e969ff59c7044fe1a49673ca8 +Author: Chris Wilson +Date: Sun Jul 29 18:19:37 2012 +0100 + + sna: Export sna_drawable_use_bo() to select target for FillRectangles + + Signed-off-by: Chris Wilson + +commit 89e75dbcb6749bde7587ecc08abed276c255e7f9 +Author: Chris Wilson +Date: Sun Jul 29 15:36:44 2012 +0100 + + sna/gen7: Prefer the BLT for self-copies + + If we are copying to ourselves, we have to regularly flush the render + cache at which point the RENDER pipeline is slower than the BLT + pipeline. + + Signed-off-by: Chris Wilson + +commit 33d6afda6cec124494f49b74152768da8a3fbdb5 +Author: Chris Wilson +Date: Sun Jul 29 09:51:16 2012 +0100 + + sna/gen7: Compile basic kernels at runtime + +commit eba8d3b3e14a5a16cea6cb8a89f12d3feb8f3d99 +Author: Chris Wilson +Date: Sun Jul 29 09:51:16 2012 +0100 + + sna/gen6: Compile basic kernels at runtime + +commit 8515ec90405912b3d776defcd6e81b1b5f699f1e +Author: Chris Wilson +Date: Sun Jul 29 09:51:16 2012 +0100 + + sna/gen5: Compile basic kernels at runtime + +commit 00c08b1842c9493ca918a868202946b2e7150de0 +Author: Chris Wilson +Date: Sun Jul 29 09:51:16 2012 +0100 + + sna/gen4: Compile basic kernels at runtime + +commit 7c9dbc980b760e0053d83ca2d7cb147613285680 +Author: Chris Wilson +Date: Sun Jul 29 09:50:39 2012 +0100 + + sna: Assemble SF and WM kernels using brw + + Signed-off-by: Chris Wilson + +commit 8ebafa0493c0fa08ab9d80eeb1191b7560dc0863 +Author: Chris Wilson +Date: Wed Sep 21 19:06:07 2011 +0100 + + sna: Add the brw assembler + + In order to construct programs on the fly to cater for the combinatorial + number of possible shaders, we need an assembler, whilst also taking the + opportunity to remove some of the inefficiencies and mistakes from the + current shaders. + + Signed-off-by: Chris Wilson + +commit ca9d9c02a260bf7930e04bf64e93cc051893c04e +Author: Chris Wilson +Date: Sat Jul 28 23:08:07 2012 +0100 + + sna: Prefer not to create a GPU bo without RENDER acceleration + + Unless that bo happens to be used on a render chain to the scanout. + + Signed-off-by: Chris Wilson + +commit eefbe5b6038424566faf7333bb09764b050dd6b4 +Author: Chris Wilson +Date: Mon Jul 30 10:56:29 2012 +0100 + + sna: Debug option to test migration of inactive pixmaps + + Signed-off-by: Chris Wilson + +commit d3499cacb59f19b5a3439a630ffbc3e105a27b75 +Author: Chris Wilson +Date: Sun Jul 29 23:00:15 2012 +0100 + + sna: Assert that we never attempt to submit a batch whilst wedged + + We should be asserting at the point that we insert the invalid operation + into the batch, but asserting upon submitting the batch is a useful + failsafe. + + Signed-off-by: Chris Wilson + +commit cb4d789f98e6e05ec29e5242887018c7450ddf10 +Author: Chris Wilson +Date: Sun Jul 29 22:55:44 2012 +0100 + + sna: Disable the warning for a hung GPU is we manually set wedged + + Only warn about a hung GPU if we encounter an EIO during operation, but + don't warn if we set wedged during initialisation based on unsupported + hw or user request. + + Signed-off-by: Chris Wilson + +commit 0fd680ff52f7ce0a101c617dfb8997c4e228e3ad +Author: Chris Wilson +Date: Sun Jul 29 22:51:26 2012 +0100 + + Don't disable acceleration on 830/845g by default + + Run the risk of a GPU hang (it shouldn't endanger the entire machine + normally) and let the user elect to disable it through + + Option "NoAccel" "true" + + Signed-off-by: Chris Wilson + +commit 3d45f0affe263985f440e144203ed7cbb3803696 +Author: Chris Wilson +Date: Sat Jul 28 18:21:08 2012 +0100 + + sna: Honour the Option "DRI" + + References: https://bugs.freedesktop.org/show_bug.cgi?id=52624 + Signed-off-by: Chris Wilson + +commit fb385745a2347f8966765567e78229d67ddc8d60 +Author: Chris Wilson +Date: Fri Jul 27 13:24:04 2012 +0100 + + sna/gen4: Move the common vertex_offset==0 check into the flush() + + Signed-off-by: Chris Wilson + +commit 73ddd8b0decee444a57f10a11f05deebba686649 +Author: Chris Wilson +Date: Fri Jul 27 12:43:00 2012 +0100 + + sna/gen4: Further refinement to the GT allocation + + Still hunting for why gen4 fails utterly. + + Signed-off-by: Chris Wilson + +commit 717823a9f77cfedc50e03c5c31c1da44a396b561 +Author: Zhigang Gong +Date: Fri Jul 27 18:12:26 2012 +0800 + + uxa/dri (glamor): Use exchange buffer in glamor fixup. + + The previous implementation is to create a new textured + pixmap based on the newly created pixmap's buffer object. + + This is not efficient, as we already created it when we + call CreatePixmap. We can just exchange the underlying + texture/image buffers by calling intel_glamor_exchange_buffers(). + + And this commit seems also fix a weird rendering problem + when working with compiz/mutter. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit a8ee1406244d8b8399bf933d6b61bfd14374b5f9 +Author: Chris Wilson +Date: Fri Jul 27 09:07:16 2012 +0100 + + 2.20.2 release + + Signed-off-by: Chris Wilson + +commit bef73cd9279be3438e467981db39c67bc13104f5 +Author: Chris Wilson +Date: Thu Jul 26 21:54:33 2012 +0100 + + sna/dri: Select the engine before emitting the wait + + So that if we have a flexible WAIT_FOR_EVENT that can go on either + pipeline, we can choose our preferred pipeline for DRI. + + Signed-off-by: Chris Wilson + +commit 1ced4f1ddcf30b518e1760c7aa4a5ed4f934b9f5 +Author: Chris Wilson +Date: Thu Jul 26 10:50:31 2012 +0100 + + Reduce maximum thread count for IVB GT1 to avoid spontaneous combustion + + Somewhere along the way it seems that IVB GT1 was reduced to only allow + a maximum of 48 threads, as revealed in the lastest bspecs. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52473 + Signed-off-by: Chris Wilson + +commit 8f8f8759111f791ee99adfd87296443fb0e6acad +Author: Chris Wilson +Date: Thu Jul 26 17:39:34 2012 +0100 + + sna/gen4: Tweak heuristics for render/blt usage + + Signed-off-by: Chris Wilson + +commit c9dd1401615f0ed9492a0c0f547fb37150e013d1 +Author: Chris Wilson +Date: Thu Jul 26 16:31:16 2012 +0100 + + sna/gen4: Bump thread counts + + Signed-off-by: Chris Wilson + +commit 7f3fdef98c1ab2fa27439c3be9810b7a934017ce +Author: Chris Wilson +Date: Thu Jul 26 15:39:05 2012 +0100 + + sna/gen7: IVB requires a complete pipeline stall when changing blend modes + + Similar to how SandyBridge behaves, I had hoped that with IvyBridge they + would have made the pipelined operation actually pipelined, but alas. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52473 + Signed-off-by: Chris Wilson + +commit 0938b3df8c25178c8ea0012e1ead1061d03a4e7c +Author: Chris Wilson +Date: Thu Jul 26 15:21:59 2012 +0100 + + sna/dri: Add an explanatory assertion + + Signed-off-by: Chris Wilson + +commit c621183466aa55a5938027b702069e792df2272d +Author: Chris Wilson +Date: Thu Jul 26 15:18:56 2012 +0100 + + sna/dri: Tidy fallback/normal CopyRegion + + Signed-off-by: Chris Wilson + +commit 52d2491a1bafb979d79bb970027c55788f199acb +Author: Chris Wilson +Date: Thu Jul 26 15:19:14 2012 +0100 + + sna/video: Protect against attempting to use TexturedVideo whilst wedged + + Signed-off-by: Chris Wilson + +commit 8c0e3bbb0c301d0fa4652aa38edd84a9fd6b555e +Author: Chris Wilson +Date: Thu Jul 26 14:58:04 2012 +0100 + + sna: Force the damage on the DRI pixmap to be flushed to the GPU + + Otherwise nothing will happen if we consider ourselves wedged. + + Signed-off-by: Chris Wilson + +commit f50d7b03b5d0b81b24f0acb4ae555545bbdaa179 +Author: Chris Wilson +Date: Thu Jul 26 14:47:44 2012 +0100 + + sna: Only recommend not to create bo for a pixmap whilst wedged + + This allows us to continue to map a GPU bo and operate inplace if we are + force to create a GPU bo for a compositor. + + Signed-off-by: Chris Wilson + +commit 49403ddd1bd9a23e1b32a10e7d0757ae2897a579 +Author: Chris Wilson +Date: Thu Jul 26 14:44:14 2012 +0100 + + sna/dri: Mark a flush required for any new DRI already on exec/dirty lists + + Signed-off-by: Chris Wilson + +commit efe3c8ff48738f2a274e1d4514d32499fc4aadbc +Author: Chris Wilson +Date: Thu Jul 26 14:43:33 2012 +0100 + + sna: Allow DRI to force allocation of a GPU bo and backing pixmap + + Signed-off-by: Chris Wilson + +commit 2069384f9f06d3ef9dbb0c3f2c64cac4b24e10fc +Author: Chris Wilson +Date: Thu Jul 26 14:15:45 2012 +0100 + + sna/dri: Implement fallback handling for CopyRegion whilst wedged + + Signed-off-by: Chris Wilson + +commit b18143de47e060b67a46d9c68590a2d35df9fca6 +Author: Paul Menzel +Date: Thu Jul 26 12:51:57 2012 +0200 + + NEWS: Correct release version: s/2.12.0/2.20.0/ + + Signed-off-by: Paul Menzel + Signed-off-by: Chris Wilson + +commit c262d02fb5defe9100df54cf83cc00e11e335745 +Author: Chris Wilson +Date: Thu Jul 26 01:12:11 2012 +0100 + + Limit PCI matching to VGA devices + + Fixes X -configure + + Signed-off-by: Chris Wilson + +commit ad6355311b8b80777bc0fec95f6bf6cd1b4969d9 +Author: Chris Wilson +Date: Thu Jul 26 01:02:53 2012 +0100 + + sna: Compile against xorg-1.10 + + Signed-off-by: Chris Wilson + +commit b6c7c490d76c683b7b5c89d20f902603b85bd3bc +Author: Chris Wilson +Date: Thu Jul 26 00:48:59 2012 +0100 + + sna: Check for a NULL scanout after DPMS off with shadow enabled + + We may mark the scanout as detached when all outputs are turned off (for + example during rotation) and so in the subsequent block handler we need + to be careful in case we are handling a detached shadow. + + Reported-by: chr.ohm@gmx.net + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52514 + Signed-off-by: Chris Wilson + +commit f4acc01bb09f68edbad4c6cc7e04c271c92661c1 +Author: Chris Wilson +Date: Wed Jul 25 22:43:32 2012 +0100 + + sna: Restore inplace upload for DRI compositors + + With a DRI compositor we have to flush the output after every request, + which leads to major inefficiencies. This can be mitigated slightly if + we know we will have to upload shortly, which we track using the pixmap + flush flag. + + In particular PutImage is meant to upload inplace to an active DRI + buffer, however this was accidentally dropped in + + commit a253c95ec63b2b075e66ae7380fed6a73469eba5 + Author: Chris Wilson + Date: Sun Jul 15 13:32:35 2012 +0100 + + sna: Prefer uploads to be staged in snoopable bo + + Performace of putimage500 on ivb i7-3720qm: + bare: 4610 + gnome-shell: 3000 + patched: 3390 + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 5c969a05ef815b261e157fe8d1172aebfd7f5841 +Author: Chris Wilson +Date: Wed Jul 25 20:28:41 2012 +0100 + + sna/gen7: Move the PS thread count definition into the constant struct + + Signed-off-by: Chris Wilson + +commit 901bb618215d65747eb0a8d481c77c1201f69362 +Author: Chris Wilson +Date: Wed Jul 25 20:13:15 2012 +0100 + + sna/gen7: Remove duplicated constants + + Signed-off-by: Chris Wilson + +commit 8c5077e4ed055a97bf9deda59c0e9a45e42317ca +Author: Chris Wilson +Date: Wed Jul 25 16:59:11 2012 +0100 + + Assume all unknown chipsets are future gen + + I think the likelihood of a new product being launched based on a 8xx + design is remote enough not to worry about. + + Signed-off-by: Chris Wilson + +commit 954d9c6aca792098cb16a46b4ec8d5fc104b15a9 +Author: Chris Wilson +Date: Wed Jul 25 15:41:29 2012 +0100 + + sna: Initialise single-shot tile offsets before use + + As noted by the compiler amidst all the noise. + + Signed-off-by: Chris Wilson + +commit 484b072072c8297a87940c9e32097923f0a77c8f +Author: Chris Wilson +Date: Wed Jul 25 12:22:47 2012 +0100 + + sna: Add 'gmux_backlight' to list of known devices for backwards compatability + + Reported-by: Austin Lund + References: https://bugs.freedesktop.org/show_bug.cgi?id=52423 + Signed-off-by: Chris Wilson + +commit 0ab6d7a50d37cf4454577cb8c333d4b8683aa054 +Author: Chris Wilson +Date: Wed Jul 25 12:20:36 2012 +0100 + + sna: Prefer platform backlight devices over firmware + + This is in contrast to libbacklight but closer to our original code as + we prefer a known custom backlight controller over the ACPI interfaces. + As only the ACPI interfaces are marked as firmware, and the custom + backlight controllers as platform, we therefore need to prefer platform + backlight devices. + + Reported-by: Austin Lund + References: https://bugs.freedesktop.org/show_bug.cgi?id=52423 + Signed-off-by: Chris Wilson + +commit b6d82ab07661aba98963f239f9501b50c3910962 +Author: Chris Wilson +Date: Wed Jul 25 10:40:07 2012 +0100 + + sna: Reduce ping-pong for Composite with render disabled + + Signed-off-by: Chris Wilson + +commit de707b7dc853a3b315ead9789d5ca541412c99bc +Author: Chris Wilson +Date: Wed Jul 25 09:05:46 2012 +0100 + + uxa: Add Apple's gmux to the list of known preferred backlights + + Reported-by: Austin Lund + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52423 + Signed-off-by: Chris Wilson + +commit 3d254e4010d0753f433cfe62c6a7546b02482847 +Author: Chris Wilson +Date: Mon Jul 23 23:45:33 2012 +0100 + + sna: Use SETUP_BLT to reduce overheads for tiled BLT + + Signed-off-by: Chris Wilson + +commit 2ed44149eaa27b9632ec83a776f3ee67b0eec7b0 +Author: Chris Wilson +Date: Mon Jul 23 23:45:33 2012 +0100 + + sna: Use SETUP_BLT to reduce overheads for stippled BLT + + Signed-off-by: Chris Wilson + +commit c1785aaca2c9347114d28f114ee59ef8206d829b +Author: Chris Wilson +Date: Mon Jul 23 23:00:25 2012 +0100 + + sna: Remove a surplus function + + Signed-off-by: Chris Wilson + +commit 554fce8a65b2518cae032f1eadf58830559299c8 +Author: Chris Wilson +Date: Mon Jul 23 22:59:16 2012 +0100 + + uxa: Pass the correct parameters to intel_detect_chipset() + + Signed-off-by: Chris Wilson + +commit 40d90dfd8674c255a45b46bbdc09d497af5b3f50 +Author: Chris Wilson +Date: Mon Jul 23 21:55:46 2012 +0100 + + intel: Refactor the common chipset detection/override + + Reduce the duplicate messages for which type of chip we by + amalgamating the common code. + + Signed-off-by: Chris Wilson + +commit e3f6c48d18c316899c71b6fc34971039c6f9e5f8 +Author: Chris Wilson +Date: Mon Jul 23 14:43:23 2012 +0100 + + sna: Refactor PutImage to avoid calling drawable_gc_flags() too early + + drawable_gc_flags() asserts that the gc has been moved to the CPU prior + to its calls so that it can read the reduced raster operation. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 1af26ea4228a9d7768b475b4f9164d2c7620d4fd +Author: Chris Wilson +Date: Mon Jul 23 14:39:44 2012 +0100 + + sna: Flesh out tiled operations using the BLT + + Before enabling the RENDER pipeline for this operation, let's just see + what is required to fully use the BLT pipeline as well. + + Signed-off-by: Chris Wilson + +commit ac182a006732525a921a9c539e5ebfb537ad3b52 +Author: Chris Wilson +Date: Mon Jul 23 11:05:05 2012 +0100 + + sna: Hold a reference to the full stipple pattern for repeated tiles + + Signed-off-by: Chris Wilson + +commit 83f683b47063eab8cfb5037d02133dd977c3fc25 +Author: Chris Wilson +Date: Sun Jul 22 23:20:23 2012 +0100 + + 2.20.1 release + + A good brown paper bag bug release for SNA. + + Signed-off-by: Chris Wilson + +commit 9402bdcc13f7e96dfe527ff4a3da8d13a7870a02 +Author: Chris Wilson +Date: Sun Jul 22 22:14:52 2012 +0100 + + sna/glyphs: Also discard the glyph mask for bitmaps with an opaque source + + Though I expect all such glyphs to be caught by the non-overlapping + checks... + + Signed-off-by: Chris Wilson + +commit b315e0ebb75d8391ebef7ebe53741a5e33c968bb +Author: Chris Wilson +Date: Sun Jul 22 20:07:38 2012 +0100 + + sna: Tweak the fallback hints for XYPixmap PutImage + + As the fallback uses a multiple-pass algorithm updating one plane at a + time, we wish to prepare the fallback surface for reads. + + Signed-off-by: Chris Wilson + +commit 8acaf2693e176a92993a498683f121cfe0343fd4 +Author: Chris Wilson +Date: Sun Jul 22 12:28:34 2012 +0100 + + sna: Promote tiled operations to the GPU if the tile is already on the GPU + + Signed-off-by: Chris Wilson + +commit 7d4a3e371beea65bf66e54ae13789d6d5ca91f8b +Author: Chris Wilson +Date: Sun Jul 22 11:19:13 2012 +0100 + + sna: Use an upload buffer for large stipples + + Signed-off-by: Chris Wilson + +commit 40e0cf32a25e43e16184b2af87a1e1abeb8e4052 +Author: Chris Wilson +Date: Sat Jul 21 19:43:23 2012 +0100 + + sna/dri: We fail at predicting the flip frame + + Simply report the values from the kernel, and transfer the blame... + + Signed-off-by: Chris Wilson + +commit c6e316eeba3008b351f2cd63829154f4672c5417 +Author: Chris Wilson +Date: Sat Jul 21 18:18:32 2012 +0100 + + sna: Adjust hints to prefer rendering convex polygon with the GPU + + Keep the general polygons as only using the GPU if necessary, until the + cost of the routines is analysed. + + Signed-off-by: Chris Wilson + +commit f1e7248cb353d634f27d297059911168ce1a0762 +Author: Chris Wilson +Date: Sat Jul 21 16:08:31 2012 +0100 + + sna: Expand the heuristic for predicting when to use CPU bo for readback + + For tiny transfers, the cost of setting up the GPU operation outweighs + the actual savings through increased throughput. So we try to guess when + it will be preferrable to simply read from the GPU bo directly. + + Signed-off-by: Chris Wilson + +commit 06db69c2c7023f702f9773be90144fdf7a1159e4 +Author: Chris Wilson +Date: Sat Jul 21 15:28:10 2012 +0100 + + sna: Update assertion for cached io buffers + + As kgem_buffers may be reused and repurposed through the snoop cache it + is no longer true that only proxies will have the io flag set. + + Signed-off-by: Chris Wilson + +commit d715e1e01437049e167462281d51b5e214594361 +Author: Chris Wilson +Date: Sat Jul 21 15:04:31 2012 +0100 + + sna: Also discard the last-was-cpu flag when overwriting cpu damage + + We interpret a FillRect that erradicates the existing damage as a + clear-event and an opportunity to see if it is worth migrating the + render commands to the GPU. This is undermined if we leave the + 'prefer-cpu' flag intact. + + Signed-off-by: Chris Wilson + +commit e95825d17ce65ad8173a5e6518a98969e236a4f8 +Author: Chris Wilson +Date: Sat Jul 21 14:38:17 2012 +0100 + + sna: Enable snooping on the reused linear buffer + + This explains why suddenly I was seeing clflush again on a couple of + machines... + + Signed-off-by: Chris Wilson + +commit c5e6b5874f334b9124a17f017c6eb175cf88f115 +Author: Chris Wilson +Date: Sat Jul 21 14:26:52 2012 +0100 + + sna: Fix the reversed not SHM assertion + + Should be double checking that we are not about to free a CPU bo pinned + to a SHM pixmap. + + Signed-off-by: Chris Wilson + +commit f36b656ab2bc16ec8849cadb0afb574bb742c3a3 +Author: Chris Wilson +Date: Sat Jul 21 13:18:40 2012 +0100 + + sna: Avoid marking io/snoop buffers as unreusable unnecessarily + + As they are kept in special caches, we can reserve the unreusable flags + for exceptional buffers. + + Signed-off-by: Chris Wilson + +commit 37dfdb0e9e86effc3ca8b590c98aa2382e8f0cea +Author: Chris Wilson +Date: Sat Jul 21 13:01:09 2012 +0100 + + sna: Correct assertion for __kgem_bo_size() + + Only proxies are measured in bytes not pages. + + Signed-off-by: Chris Wilson + +commit 83ad661bc73e9d0094b669c5203e25afc3937bb7 +Author: Chris Wilson +Date: Sat Jul 21 12:51:41 2012 +0100 + + sna: Change the vmap interface name to userptr + + This is in common with the other drivers and avoids the conflict with + 'vmalloc/vmap' used by the kernel for allocation of contiguous virtual + mappings. + + Signed-off-by: Chris Wilson + +commit 8dcccd308222bcf1b96f2ee15842b4558ea5f29e +Author: Chris Wilson +Date: Sat Jul 21 12:47:21 2012 +0100 + + sna: s/vmap/snoop/ since we use the flag more generically + + Signed-off-by: Chris Wilson + +commit 6acc9e6a6e1de2a11597c810e02f793774cef2dd +Author: Chris Wilson +Date: Sat Jul 21 12:07:46 2012 +0100 + + sna: Fix role reversal of __kgem_bo_size() and kgem_bo_size()! + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 286b0e1a48cab85191dfbb112c8dd14aeaa70956 +Author: Chris Wilson +Date: Fri Jul 20 16:04:37 2012 +0100 + + sna: Refresh experimental userptr vmap support + + Bring the code uptodate with both kernel interface changes and internal + adjustments following the creation of CPU buffers with set-cacheing. + + Signed-off-by: Chris Wilson + +commit 93c794eb3f80bef64f1619986a7c950229dc7a47 +Author: Chris Wilson +Date: Fri Jul 20 20:34:53 2012 +0100 + + sna: Micro-optimise copying boxes with the blitter + + Signed-off-by: Chris Wilson + +commit a0d95a9c2d3a27eafbe459e2aefe772c006e596f +Author: Chris Wilson +Date: Fri Jul 20 20:34:23 2012 +0100 + + sna: Only update a buffer when it becomes dirty + + Signed-off-by: Chris Wilson + +commit c52d265b83b033fb2a275fcc9a8a8d146e3afdf6 +Author: Chris Wilson +Date: Fri Jul 20 19:38:38 2012 +0100 + + sna: Tweak CPU bo promotion rules for CopyArea + + Signed-off-by: Chris Wilson + +commit f92a64dd9162731210b14368b6ee408356d7fefc +Author: Chris Wilson +Date: Fri Jul 20 15:54:35 2012 +0100 + + sna: Only set the vmap flag after we make the bo snoopable + + Otherwise if we fail then we incorrectly add the handle to the vmap + cache. + + Signed-off-by: Chris Wilson + +commit 8b4cf24f1403bf3d929cc0725de66b3d0e08ebaf +Author: Chris Wilson +Date: Fri Jul 20 14:46:32 2012 +0100 + + sna: Also check whether the first upload box can use the BLT + + No point checking boxes 1..n if box 0 is the troublemaker! + + Signed-off-by: Chris Wilson + +commit df14b285be44f0c40a718bb8ae09a9558b1eb2c7 +Author: Chris Wilson +Date: Fri Jul 20 14:35:28 2012 +0100 + + sna/gen6: Prefer the more flexible render ring for large surfaces + + Signed-off-by: Chris Wilson + +commit 578ff11c3753ede2c81afc47302991e3d3b316f2 +Author: Chris Wilson +Date: Fri Jul 20 14:24:06 2012 +0100 + + sna: Just use composite.box() when we only have one box + + Signed-off-by: Chris Wilson + +commit fb7987fc0b51cf3b83dcf78bcefe65ec3af32ccf +Author: Chris Wilson +Date: Fri Jul 20 13:12:27 2012 +0100 + + sna/dri: Cleanup ring selection for SNB+ CopyRegion + + Signed-off-by: Chris Wilson + +commit 3b56588fbaa2c4ccdfb2f2a8f5656d2cda9dacd7 +Author: Chris Wilson +Date: Fri Jul 20 10:19:25 2012 +0100 + + sna: Update WIP userptr example usage + + Signed-off-by: Chris Wilson + +commit 473a1dfb683ed576d86b37aba36aaa0e379f4606 +Author: Chris Wilson +Date: Fri Jul 20 09:56:13 2012 +0100 + + sna: Rename kgem_partial_bo to kgem_buffer + + Signed-off-by: Chris Wilson + +commit 8e6e8a2fa8adda9ae9be8a88fbb14851e9d2df2e +Author: Chris Wilson +Date: Fri Jul 20 09:51:46 2012 +0100 + + sna: Allow the snoopable upload buffer to take pages from the CPU vma cache + + Signed-off-by: Chris Wilson + +commit 979035bb9ce04db5fe30efa4f6daab0a40f6af57 +Author: Chris Wilson +Date: Thu Jul 19 20:06:28 2012 +0100 + + sna: Remove topmost unused 'flush' attribute + + Signed-off-by: Chris Wilson + +commit b83011909aaf185f05fc2df743882c2410eff46d +Author: Chris Wilson +Date: Thu Jul 19 19:51:46 2012 +0100 + + sna: Replace 'sync' flag with equivalent 'flush' + + The only difference is in semantics. Currently 'sync' was only used on + CPU buffers for shared memory segments with 2D clients, and 'flush' on GPU + buffers shared with DRI clients. + + Signed-off-by: Chris Wilson + +commit 88bee3caeaacbbb1b4d789ea3db9a3802a62b59d +Author: Chris Wilson +Date: Thu Jul 19 19:40:34 2012 +0100 + + sna: Remove unused scanout-is-dirty? flag + + Signed-off-by: Chris Wilson + +commit 6f60f89588caa70e7d8ed53ba453bbe8c2094a95 +Author: Chris Wilson +Date: Thu Jul 19 16:58:34 2012 +0100 + + sna/gen6: Bump the WM thread count to 80 + + Note that we should only do this when "WiZ Hashing" is disabled. So we + should be checking the GT_MODE register (bring on i915_read!) to be sure + that is safe to do so. However, it gives a big boost to performance of + render copies... It also causes perf benchmarks to hit thermal limits + much quicker. + + Signed-off-by: Chris Wilson + +commit fc39d4b5cb105d269c5349e479daf112f5d93580 +Author: Chris Wilson +Date: Thu Jul 19 16:25:54 2012 +0100 + + sna/gen6: Add a simple DBG option to limit usage of either BLT/RENDER + + We can force the code to either select only BLT or RENDER operations - + for those that we have a choice for at least! + + Signed-off-by: Chris Wilson + +commit 15d3eea7004822e5cbd48d676692e1b6a2b26d3e +Author: Chris Wilson +Date: Thu Jul 19 16:22:20 2012 +0100 + + sna: Handle mixed bo/buffers in assertions + + Signed-off-by: Chris Wilson + +commit e4fce3b7801038e4f64d848a0995f4b441b4d2aa +Author: Chris Wilson +Date: Thu Jul 19 10:50:09 2012 +0100 + + sna/gen4: Hookup composite spans + + Due to the unresolved flushing bug it is no faster (so only enable when + we definitely can't do the operation inplace), however it does eliminate + a chunk of CPU overhead. + + Signed-off-by: Chris Wilson + +commit 5f138176bf15682324d2e8cfa9fac3e49604bf8f +Author: Chris Wilson +Date: Thu Jul 19 10:32:33 2012 +0100 + + sna: Tweak order of screen re-initialisation + + Signed-off-by: Chris Wilson + +commit 9bd0f8f3e7783d7a6bab707fc08ec96830cd5809 +Author: Chris Wilson +Date: Thu Jul 19 09:40:07 2012 +0100 + + i810: Correct the double negative and enable XAA when available + + Signed-off-by: Chris Wilson + +commit d145d0e1459f578eea621e6944814642e5dd431f +Author: Chris Wilson +Date: Thu Jul 19 09:23:10 2012 +0100 + + i810: Handle initialisation without the XAA module present at runtime + + Signed-off-by: Chris Wilson + +commit 7a3b98e05b706548527e73b2008600391c601a62 +Author: Chris Wilson +Date: Thu Jul 19 08:42:05 2012 +0100 + + sna: Re-register the SHM funcs every server generation + + As the SHM layer hooks into the CloseScreen chain to free its privates, + we then need to call the registration function again on the next + generation to ensure that the private is reallocated before use. + + Reported-by: Pawel Sikora + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52255 + Signed-off-by: Chris Wilson + +commit 4bcab83bbddf8a698aa83f5038f9ab019a404bd5 +Author: Chris Wilson +Date: Wed Jul 18 22:19:45 2012 +0100 + + i810: DRI is not dependent upon XAA + + The blit routines is uses are independent of the XAA driver interface + and can be used separately. + + Signed-off-by: Chris Wilson + +commit 558c8251299b786cab1ac83dbd35f077224b5950 +Author: Chris Wilson +Date: Wed Jul 18 22:00:30 2012 +0100 + + sna/gen4+: Drop unsupported source formats + + Once again I've confused existence of the enum with the ability of the + sampler to read that format. + + Signed-off-by: Chris Wilson + +commit 9f3b3098c9f870d303a9de2b9c0db119eff5a865 +Author: Chris Wilson +Date: Wed Jul 18 21:39:47 2012 +0100 + + sna/dri: Allow DRI2 to be loaded even if we are wedged + + Just because the GPU is spitting EIO at us does not necessarily imply + that a DRI client will also suffer. Spit out a warning for later bug + reporting and let them find out for themselves! + + Signed-off-by: Chris Wilson + +commit 15b7191fd363e9e6083844a218e25419695d55f1 +Author: Chris Wilson +Date: Wed Jul 18 12:59:41 2012 +0100 + + sna/gen6: Micro-optimise render copy emission + + Backport of the changes made for IVB. + + Signed-off-by: Chris Wilson + +commit 4eea9ac0035dd72f3c637adc39eeaeda46472e9e +Author: Chris Wilson +Date: Wed Jul 18 12:59:41 2012 +0100 + + sna/gen7: Micro-optimise render copy emission + + The goal is bring the overhead down to that of using the blitter. Tricky + given the number of steps to using the 3D pipeline compared to the + BLT... + + A stretch goal would be to make IVB GPU bound for -copywinpix10! + + Signed-off-by: Chris Wilson + +commit 267429bbb146449ee4d3b88fa8e23c5b1d53470a +Author: Chris Wilson +Date: Wed Jul 18 19:24:44 2012 +0100 + + sna: Enable runtime detection of set-cacheing ioctl + + Signed-off-by: Chris Wilson + +commit c0b3674d042ff55d64ad1fd0d64926e1967be323 +Author: Chris Wilson +Date: Wed Jul 18 20:48:27 2012 +0100 + + sna/trapezoids: Only reduce bounded operators to a single pass + + Only for a few operators can we replace the opacity mask by + premultiplying into the source. + + Signed-off-by: Chris Wilson + +commit bb0303677c38076db14dfbceec3636197a971e8c +Author: Chris Wilson +Date: Wed Jul 18 10:40:50 2012 +0100 + + sna/trapezoids: Use pixman from within the spans to reduce two-pass operations + + Reduce the two pass CompositeTrapezoids if we can perform the operation + inplace by calling pixman_image_composite from the span. This step + enables this for xrgb32. + + Signed-off-by: Chris Wilson + +commit bee1a14618797b3d3a1c1a20eb72644fa907c048 +Author: Chris Wilson +Date: Wed Jul 18 09:38:32 2012 +0100 + + sna: Fix processing of the last fallback box + + The evil typo caused us to misalign the clip boxes and run over a + garbage array on 64-bit builds. + + Reported-by: Edward Sheldrake + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52163 + Signed-off-by: Chris Wilson + +commit 88cb1968b6dbf3edfa885da9503e91124af46007 +Author: Chris Wilson +Date: Wed Jul 18 09:38:03 2012 +0100 + + sna: Add more DBG for fallback processing + + Hunting the lost box... + + Signed-off-by: Chris Wilson + +commit 36f2e46619598e9bca4fe1207aa2f157bfa1ecf4 +Author: Chris Wilson +Date: Wed Jul 18 00:45:54 2012 +0100 + + sna: Reuse the snoopable cache more frequently for upload buffers + + Now that we are keeping a small cache of snoopable buffers, experiment + with using them for uploads more frequently. + + Signed-off-by: Chris Wilson + +commit 73f07abbd2d78418e5a66262f293b5ed80b7ccb4 +Author: Chris Wilson +Date: Wed Jul 18 00:19:49 2012 +0100 + + sna: Maintain a short-lived cache of snoopable CPU bo for older gen + + Once again, we find that frequent buffer creation and manipulation of the + GTT is a painful experience leading to noticeable and frequent application + stalls. So mitigate the need for fresh pages by keeping a small stash of + recently freed and inactive bo. + + Signed-off-by: Chris Wilson + +commit 77520641a332a622c0b5378bd254ed5cb46a5f0a +Author: Chris Wilson +Date: Tue Jul 17 22:09:33 2012 +0100 + + i810: Replace XAAGet.*ROP() with local tables + + The XAAGetPatternROP() and XAAGetCopyROP() functions were removed along + with the rest of XAA so we need to implement those tables locally. + + Reported-by: Knut Petersen + Signed-off-by: Chris Wilson + +commit caef63e0268e59e439b030a9a338e81d5cf8e311 +Author: Chris Wilson +Date: Tue Jul 17 21:22:57 2012 +0100 + + i810: Split xaa routines from common acceleration methods + + Some of the routines in i810_accel.c are specific to XAA whilst others + are used elsewhere, for example in i810_dri.c. Therefore we have to be + selective over which ones we compile out without xaa. + + Reported-by: Knut Petersen + Signed-off-by: Chris Wilson + +commit 53ff19f45a3cc4863845c23e8d3c2c2b95e03fd9 +Author: Chris Wilson +Date: Tue Jul 17 19:40:16 2012 +0100 + + sna: Allow wedged CopyPlane to operate inplace on the destination + + Signed-off-by: Chris Wilson + +commit d4fa4d5494db45b227c9ae7f7a90cd5dfd940027 +Author: Chris Wilson +Date: Tue Jul 17 19:29:32 2012 +0100 + + sna: Allow inplace copies for wedged CopyArea + + Signed-off-by: Chris Wilson + +commit 217eeadf81a8cbb43e495e1e937acdd95c703377 +Author: Chris Wilson +Date: Tue Jul 17 19:35:06 2012 +0100 + + sna: Allow operation inplace to scanout whilst wedged + + Signed-off-by: Chris Wilson + +commit 40ff29480a0dbf458adf1a1b0d3275ad1361530e +Author: Chris Wilson +Date: Tue Jul 17 18:38:49 2012 +0100 + + sna: Tweak fast blt path + + Signed-off-by: Chris Wilson + +commit fce69c79c4840e7863d7c382da0d22be90a9f19a +Author: Chris Wilson +Date: Tue Jul 17 18:28:24 2012 +0100 + + sna: prefer fbBlt over pixman_blt + + It is currently much better optimised through memcpy. + + Signed-off-by: Chris Wilson + +commit c29f96d50839388377ad57c6366f9bc7ad8b9d0a +Author: Chris Wilson +Date: Tue Jul 17 13:02:51 2012 +0100 + + sna/gen7: Bump the number of pixel shader threads for IVB GT2 + + Spotted-by: Kilarski, Bernard R" + Signed-off-by: Chris Wilson + +commit 799bae9e8ff53fb1b5c74f3278d530a58d66de9a +Author: Chris Wilson +Date: Tue Jul 17 17:07:10 2012 +0100 + + sna/dri: Do not allow an exchange to take place on invalid buffers + + If the SwapBuffers is called after we have resized a Window but before + the client has processed the Invalidate notification, then the + SwapBuffers will be referring to a pair of stale buffers. As the buffers + are no longer attached to the Pixmap, we can not simply exchange them. + + Signed-off-by: Chris Wilson + +commit 067aeaddb8047f01ae3a20b26ba0acf5ba2d035f +Author: Chris Wilson +Date: Tue Jul 17 15:33:19 2012 +0100 + + sna: Rebalance choice of GPU vs CPU bo + + Signed-off-by: Chris Wilson + +commit 7ebeea3f5c71959773478de44b08a967fe5acc8b +Author: Chris Wilson +Date: Tue Jul 17 15:10:43 2012 +0100 + + sna: Avoid the CPU bo readback for render paths + + As we exclude using the CPU bo if there is overlapping GPU damage, we + can forgo the call to keep the transfer the damage. + + Signed-off-by: Chris Wilson + +commit ed8c729ed02705fd03be1ab22a94b5aae13567c8 +Author: Chris Wilson +Date: Tue Jul 17 11:21:30 2012 +0100 + + sna: Catch the short-circuit path for clearing clear on move-to-gpu as well + + I thought the short-circuit path was only taken when already clear, I + was wrong. + + Signed-off-by: Chris Wilson + +commit 359b9cc82de13b0ac89692896ac6104ff3be308b +Author: Chris Wilson +Date: Tue Jul 17 10:26:27 2012 +0100 + + sna: Limit the use of snoopable buffers to read/write uploads + + Signed-off-by: Chris Wilson + +commit 4f21dba6ee505217d63edd84611622e05aeb4593 +Author: Chris Wilson +Date: Tue Jul 17 09:26:46 2012 +0100 + + sna: Only drop the clear flag when writing to the GPU pixmap + + Signed-off-by: Chris Wilson + +commit fbfbbee8288aba1e4754fd2dbc02e71f5e118cda +Author: Chris Wilson +Date: Tue Jul 17 09:20:21 2012 +0100 + + sna: Fix glyph DBG to include clip extents and actual glyph origin + + Signed-off-by: Chris Wilson + +commit f0ed0ca234a4bed986824845ff70e8554c0e579f +Author: Chris Wilson +Date: Tue Jul 17 08:35:20 2012 +0100 + + sna: Promote an undamaged pixmap to use the full GPU + + Signed-off-by: Chris Wilson + +commit 1f79e877fb6602bd0f9dd14ac9c3511f3b7044fb +Author: Chris Wilson +Date: Mon Jul 16 21:18:24 2012 +0100 + + sna: Share the pixmap migration decision with the BLT composite routines + + Signed-off-by: Chris Wilson + +commit d141a2d59007866c9eaad020c744be446e70c346 +Author: Chris Wilson +Date: Mon Jul 16 23:20:58 2012 +0100 + + sna: Disable snoopable bo for gen4 + + Further inspection reveals that whilst it may not hang the GPU, the + results are not pleasant or complete. + + Signed-off-by: Chris Wilson + +commit 107feed2a4ca044313c70f83a62909187ff1f905 +Author: Chris Wilson +Date: Mon Jul 16 18:58:30 2012 +0100 + + sna: Disable snoopable uplaod buffers for gen4 + + The sampler really does not like using snoopable buffers... + + Signed-off-by: Chris Wilson + +commit 818c21165c746b7b410a6e6e23b1675d88db685d +Author: Chris Wilson +Date: Mon Jul 16 16:28:00 2012 +0100 + + sna: Fixup pixmap validation for sna_copy_area() + + Remember to offset the box by the drawable deltas in order to + compensate for compositing. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=52142 + Signed-off-by: Chris Wilson + +commit 623d84bed7c47ac39348775ce35eec54196f6dac +Author: Chris Wilson +Date: Mon Jul 16 16:07:37 2012 +0100 + + Wrap defines to avoid redefinition warnings + + Currently this only catches out ARRAY_SIZE, but wrap the other common + defines for consistency. + + Signed-off-by: Chris Wilson + +commit 907a2a7c97514d3f7610648ed87c7042a857f786 +Author: Chris Wilson +Date: Mon Jul 16 14:47:03 2012 +0100 + + sna/trapezoids: Fix inplace unaligned fills (on gen4) + + Reported-by: Sergio Callegari + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52150 + Signed-off-by: Chris Wilson + +commit 6ce2f40249231f57cf464361ea5329cee1932ccf +Author: Chris Wilson +Date: Mon Jul 16 14:46:39 2012 +0100 + + sna/trapezoids: Add some DBG to unaligned fills + + Signed-off-by: Chris Wilson + +commit 2721214868685123c973970a8ce0d93346ae0ee2 +Author: Chris Wilson +Date: Mon Jul 16 13:52:39 2012 +0100 + + sna: Move the disabling of CPU bo for gen4 to the render unit + + They appear to work fine with the BLT and only seem to cause issues when + used with the sammpler. So enable them for accelerated uploads and + downloads. + + Signed-off-by: Chris Wilson + +commit 0777b146bf1a63c99e4d4af141e676a47b1f2dc9 +Author: Chris Wilson +Date: Mon Jul 16 13:11:07 2012 +0100 + + sna: Use set-cache-level to allocate snoopable upload buffers + + Signed-off-by: Chris Wilson + +commit 33443f7ee48fa54b6f4d09c93cddac0e32314b9c +Author: Chris Wilson +Date: Mon Jul 16 12:51:54 2012 +0100 + + sna: Add a couple of DBG options to control accelerated up/downloads + + Signed-off-by: Chris Wilson + +commit 924060293826a1cc0d9d7bc26e913e46c6b2d054 +Author: Chris Wilson +Date: Mon Jul 16 12:03:47 2012 +0100 + + sna: Discard and recreate the CPU buffer when busy during move-to-cpu + + Signed-off-by: Chris Wilson + +commit 7024ef771ff170e61e788b5216c86b46e0f8ae6a +Author: Chris Wilson +Date: Mon Jul 16 12:15:54 2012 +0100 + + sna: Add a few DBG to show when CPU bos are being used for xfer + + Signed-off-by: Chris Wilson + +commit c564414157e27417f0de1c0542dafd9b47e01eda +Author: Chris Wilson +Date: Mon Jul 16 09:34:30 2012 +0100 + + sna: Disable the scanout flush when switch off via DPMS + + Signed-off-by: Chris Wilson + +commit 536e7ab756d6821db79e4cd79a250af1c0f7d5a3 +Author: Chris Wilson +Date: Mon Jul 16 12:16:26 2012 +0100 + + intel: Don't use stdbool without declaring it + + Reported-by: Fabio Pedretti + Signed-off-by: Chris Wilson + +commit 0c32be15b06ad63c1fc1371de879f2d879080f6b +Author: Chris Wilson +Date: Thu Jul 5 19:26:48 2012 +0100 + + uxa: Remove Shadow hack + + This was an incomplete hack so deprecate in favour of Shadow-on-Steriods, + SNA. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47324 + Signed-off-by: Chris Wilson + +commit 6a18a0936eafc45ab920ab0eecf2fc2a601c41a7 +Author: Chris Wilson +Date: Sun Jul 15 20:26:00 2012 +0100 + + configure: version bump for 2.20.0 release + + The day SNA hits mainstream... + + Signed-off-by: Chris Wilson + +commit 6fa059330decd1437eef4928d732ec91fd4e17e7 +Author: Chris Wilson +Date: Sun Jul 15 14:04:48 2012 +0100 + + sna: Avoid creating a CPU bo for uploads if we already have a large GPU bo + + And vice-versa if already have a large CPU bo. + + Signed-off-by: Chris Wilson + +commit a253c95ec63b2b075e66ae7380fed6a73469eba5 +Author: Chris Wilson +Date: Sun Jul 15 13:32:35 2012 +0100 + + sna: Prefer uploads to be staged in snoopable bo + + Signed-off-by: Chris Wilson + +commit ef6d94a8444927941db108811e1a26357dc3f18e +Author: Chris Wilson +Date: Sun Jul 15 11:46:53 2012 +0100 + + sna: Simply reverse all the boxes if dx <= 0 and dy <= 0 + + In this fairly common case, avoid both the double pass and use a simpler + algorithm as we can simply reverse the order of the boxes. + + Signed-off-by: Chris Wilson + +commit 6601a943ff968ac39ba198351c50dc883cb4232e +Author: Chris Wilson +Date: Sun Jul 15 11:39:56 2012 +0100 + + sna: Keep track of the base pointer for the reordered boxes + + So that we avoid freeing an invalid pointer. + + Signed-off-by: Chris Wilson + +commit ef34d5cf415ad7459ab44b0ec2e70b14150735fc +Author: Chris Wilson +Date: Sat Jul 14 23:25:17 2012 +0100 + + sna: Make sure we check for a busy CPU bo before declaring is-cpu + + Even if the pixmap is entirely damaged on the CPU, we still may be in + the process of transferring it and so cause an unwanted stall. + + Signed-off-by: Chris Wilson + +commit 0e397e4a1dc23ed07089c967612d705584f3b376 +Author: Chris Wilson +Date: Sat Jul 14 21:35:23 2012 +0100 + + sna/glyphs: Perform the fallback mask reduce before moving the glyph pointers + + Signed-off-by: Chris Wilson + +commit db1ee13a53b0c1348b7566ee60ee1b7b384ef59a +Author: Chris Wilson +Date: Sat Jul 14 21:26:01 2012 +0100 + + sna/gen7: Check for gradient allocation failure within spans + + Signed-off-by: Chris Wilson + +commit 86479e97460da798a3804cbb4ae39e62de881af1 +Author: Chris Wilson +Date: Sat Jul 14 21:24:04 2012 +0100 + + sna/gen7: Uses EXTEND_PAD for its alpha-gradient with spans + + Fixes regression from 2b94f9a043. + + Signed-off-by: Chris Wilson + +commit f17037275c05198c3c3f456964fd42032f9085b6 +Author: Chris Wilson +Date: Sat Jul 14 20:11:17 2012 +0100 + + sna: Reorder overlapping boxes for CopyArea/Window + + Signed-off-by: Chris Wilson + +commit 86e09d14bd00344d378b86a19ebb44f7d946926c +Author: Chris Wilson +Date: Sat Jul 14 17:51:31 2012 +0100 + + sna: Tidy sna_copy_boxes + + So there appears to be a bug hidden here. But only when we scroll + upwards in a GTK+ application. Hmm. + + Signed-off-by: Chris Wilson + +commit 924f596463555db27214fd8227218c2e21ecddc8 +Author: Chris Wilson +Date: Sat Jul 14 19:03:08 2012 +0100 + + sna: Avoid BLT to snoopable bo on older gen + + Signed-off-by: Chris Wilson + +commit 44e226b1d9fca8cb95b0864adf8708b03ee8472c +Author: Chris Wilson +Date: Sat Jul 14 18:36:29 2012 +0100 + + sna/glyphs: A repeat of the earlier typo for pixman glyphs + + Signed-off-by: Chris Wilson + +commit 797ebf937fcfcc87502727c70e6b52f89fecc799 +Author: Chris Wilson +Date: Sat Jul 14 16:58:18 2012 +0100 + + sna/glyphs: Fix typo and render glyphs to the small mask + + Signed-off-by: Chris Wilson + +commit 2b94f9a043372ffede01339eea99377a71169fbc +Author: Chris Wilson +Date: Sat Jul 14 16:38:21 2012 +0100 + + sna/gen7: Preselect sampler + + Signed-off-by: Chris Wilson + +commit 50d61c38bdb720c17ba5bfcaf97032338e466d9b +Author: Chris Wilson +Date: Sat Jul 14 16:07:32 2012 +0100 + + sna/gen4: Fix typo introduced in checking dst format + + Signed-off-by: Chris Wilson + +commit fc91b1f157f9e6e4097e662e2890574e530344ac +Author: Chris Wilson +Date: Sat Jul 14 15:48:50 2012 +0100 + + sna/gen7: Only emit the render flushes between operations + + Signed-off-by: Chris Wilson + +commit d30dc59651f156e9d4572141e2c54af89d007a37 +Author: Chris Wilson +Date: Sat Jul 14 15:42:19 2012 +0100 + + sna/gen7: Only fallback to BLT for a redirected target + + As we can always use a partial surface for the source. + + Signed-off-by: Chris Wilson + +commit 9f05b0c03b1fdab474b436431c430028fca1937e +Author: Chris Wilson +Date: Sat Jul 14 15:03:32 2012 +0100 + + sna/gen4+: Fix up card/dest format confusion in previous commit + + That would have been much more successful had I not supplied the wrong + opaque formats to the sampler. + + Signed-off-by: Chris Wilson + +commit fffbc34e4621898eee9b80bf8b6b3699bcade52a +Author: Chris Wilson +Date: Sat Jul 14 14:54:27 2012 +0100 + + sna/gen4+: Translate to card format using a switch + + GCC produces faster code than a walk over the format tables. + + Signed-off-by: Chris Wilson + +commit 95fdd9af5c8a8360d02debc400e75869c36f05ca +Author: Chris Wilson +Date: Sat Jul 14 13:05:27 2012 +0100 + + sna: Enable pixman_glyphs if available + + Signed-off-by: Chris Wilson + +commit 3f764ee4c50567cfb831495d42cb6c2bb94055ad +Author: Chris Wilson +Date: Sat Jul 14 12:29:47 2012 +0100 + + sna/dri: Presume an unknown chipset will want i965_dri.so + + Signed-off-by: Chris Wilson + +commit 39845280b5a9d0ed60c6a158c3d0df9fb8756d40 +Author: Chris Wilson +Date: Sat Jul 14 12:14:28 2012 +0100 + + sna: Allow BLT support on future unknown hardware + + Assume that if the kernel recognises the chipset and declares it has a + BLT, we can use it. + + Signed-off-by: Chris Wilson + +commit b260ca44b3aaba2c8cd25640ad7ac9ca6478b0f2 +Author: Chris Wilson +Date: Sat Jul 14 09:59:07 2012 +0100 + + Drop some unused includes + + Signed-off-by: Chris Wilson + +commit f517bdb12b909ef9d0897166bdabc537551a065b +Author: Chris Wilson +Date: Sat Jul 14 08:56:21 2012 +0100 + + sna: Do not perform batch compaction on old kernels + + As they will reject the delta pointing outside of the target batch. + + Signed-off-by: Chris Wilson + +commit ce69a1e8686889f1eebb4cb3a39c41f473e58b93 +Author: Chris Wilson +Date: Fri Jul 13 23:25:02 2012 +0100 + + sna: Add some DBG for selecting glyph path + + Signed-off-by: Chris Wilson + +commit b68b2d90915f7a97e43a39e3117927544886fba0 +Author: Chris Wilson +Date: Fri Jul 13 23:24:32 2012 +0100 + + sna: Add some DBG for short-circuiting choice of source bo + + Signed-off-by: Chris Wilson + +commit ad4786b285074b5bd70b3ad0bea6ec1b77ad6740 +Author: Chris Wilson +Date: Fri Jul 13 22:24:51 2012 +0100 + + sna: Aim for consistency and use stdbool except for core X APIs + + Signed-off-by: Chris Wilson + +commit a05c3547bba52288bae872ea672ffe2f4dab2ffa +Author: Chris Wilson +Date: Fri Jul 13 15:06:15 2012 +0100 + + sna/gen4: Simplify comparing the pipeline-pointers against the previous + + Signed-off-by: Chris Wilson + +commit ea9ec18505645dfec85ab96bbbbbc1793830c737 +Author: Chris Wilson +Date: Fri Jul 13 11:39:01 2012 +0100 + + sna: Split CloseScreen into two phases + + In order to get the ordering correct we need to free the xf86_cursors + before calling the miPointerCloseScreen. This requires us to insert a + hook at the top of the CloseScreen chain. However we still require the + final CloseScreen hook in order to do the fundamental clean up, hence + split the CloseScreen callback into two phases. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 0f03f7b4359fcbcde651bc1554ddff4fe10bc53b +Author: Chris Wilson +Date: Fri Jul 13 10:35:27 2012 +0100 + + sna: Only try to enable DRI2 if the module is available at runtime + + Blatantly cribbed from Michel Danzer's patch for ati... + + Signed-off-by: Chris Wilson + +commit b5d6a57f12025aef9850c7d9baa6905f776be971 +Author: Chris Wilson +Date: Thu Jul 12 22:16:27 2012 +0100 + + Enable compilation of SNA by default + + But only if we meet the required versions of Xorg and leave UXA as the + default AccelMethod for the time being. + + Signed-off-by: Chris Wilson + +commit 6c2975ab2943478b3a246b5fb231f9f3df2d8475 +Author: Chris Wilson +Date: Thu Jul 12 22:14:39 2012 +0100 + + Fix the reporting of whether SNA is configured + + Signed-off-by: Chris Wilson + +commit fd15ce65ab8ce5cf571e37daa7db1ee245616cd4 +Author: Chris Wilson +Date: Thu Jul 12 20:32:14 2012 +0100 + + sna: Fix build without DRI2 + + Signed-off-by: Chris Wilson + +commit 22be9988b933f33fc5247a9abc3b00a7f2e4a202 +Author: Chris Wilson +Date: Thu Jul 12 19:49:34 2012 +0100 + + sna: Check for failure to initialize the sprite pointers + + Signed-off-by: Chris Wilson + +commit 32e7f4ee64867779b2def6fcd882708d7b0e2cf5 +Author: Chris Wilson +Date: Thu Jul 12 19:39:10 2012 +0100 + + sna/glyphs: Fix array allocation for list_extents + + Originally I intended to skip assigning the box on the last list. + However, loop simplicity failed and now we run the risk of writing + beyond the end of stack_extents, and overwriting the list_extents + pointer. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 0477b5fb6f040f3bad86bb314a24df1bcd660aed +Author: Chris Wilson +Date: Thu Jul 12 19:37:02 2012 +0100 + + sna/glyphs: Apply mask reduction along fallback paths as well + + Signed-off-by: Chris Wilson + +commit 16aaa51b5d326f44974489f5b29716c7ff5ab48e +Author: Chris Wilson +Date: Thu Jul 12 15:26:54 2012 +0100 + + sna: Rearrange the tests for dropping the glyph mask + + Signed-off-by: Chris Wilson + +commit 600746f923b046187a66b60b5e5d2b187475730e +Author: Chris Wilson +Date: Thu Jul 12 14:16:31 2012 +0100 + + i810: Remove vestigial reference to xaa.h + + i810_hwmc.c can pull it in via i810.h like everybody else. As for + xaalocal.h, I have no idea what that is... Both appear to be cut'n'paste + includes. + + Signed-off-by: Chris Wilson + +commit 1d9ab2e7101167075112a472ee82530dc0365183 +Author: Zhigang Gong +Date: Thu Jul 12 18:47:50 2012 +0800 + + uxa/dri: Fix a buffer leak on pageflipping when enabling glamor. + + We need to put current front_buffer to back buffer thus we + don't need to create a new back buffer next time. This behaviou + should be the same with or without glamor. Previous code + incorrectly discard the previous front_buffer and cause a + big buffer leak problem. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit fa89e0614563cbe0cc45e6d7e7584cb333244c27 +Author: Zhigang Gong +Date: Thu Jul 12 18:47:51 2012 +0800 + + uxa/glyphs: Bypass uxa glyphs operations if using glamor. + + glamor_glyphs will never fallback. We don't need to keep a + uxa glyphs cache picture here. Thus simply bypass the + corresponding operations. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit d25000e1f31e78aff2ab43adb12aec0aac36f56f +Author: Chris Wilson +Date: Wed Jul 11 22:37:25 2012 +0100 + + i810: Tidy configure detection for XAA/DGA + + Signed-off-by: Chris Wilson + +commit 44a1528c15eec9b3f93651e779013137864d4d2b +Author: Chris Wilson +Date: Wed Jul 11 15:05:32 2012 +0100 + + sna: Remove unused cached partials list + + Signed-off-by: Chris Wilson + +commit 94d489ae43a2c4d4d9ddc9ce30ff1a9142b77d4a +Author: Chris Wilson +Date: Wed Jul 11 14:25:20 2012 +0100 + + sna: Minor tweak to upload in place if the CPU bo is busy + + Since we have to pay the price of the stall anyway... + + Signed-off-by: Chris Wilson + +commit b5db90aa52f10897ad2d7795df94c0e3d2878aea +Author: Chris Wilson +Date: Wed Jul 11 12:52:24 2012 +0100 + + sna: Discard the mask for "non-overlapping" glyphs + + If we can acheive the same rasterisation results without the mask, + rendering the glyphs-to-dst is so much faster that it outweighs the cost + of checking for overlapping glyphs. + + The penalty is then for code that correctly declared that it required + a mask, who now have an extra ~10% overhead in the processing of their + glyphs. + + Signed-off-by: Chris Wilson + +commit 665c9cbdcf2c493cac29d316eaffa2abe197a183 +Author: Chris Wilson +Date: Tue Jul 10 19:01:12 2012 +0100 + + sna: Disable periodic scanout refresh if all outputs are disconnected + + Signed-off-by: Chris Wilson + +commit 85fdc3143b157fd7ba3453efc86da8238d9de316 +Author: Chris Wilson +Date: Tue Jul 10 12:43:46 2012 +0100 + + sna: Avoid the expensive recomputation of the region when copying + + Signed-off-by: Chris Wilson + +commit 747ed0ca28bb46fc45ff20acd1f82212fa2b46bd +Author: Chris Wilson +Date: Tue Jul 10 17:05:20 2012 +0100 + + sna: Only promote to full GPU if we already have a GPU bo + + Signed-off-by: Chris Wilson + +commit 232217eef8f99f5678d65bf9aa5b898ef6d3b3c6 +Author: Daniel Stone +Date: Tue Jul 10 00:32:13 2012 +0100 + + i810: Make DGA optional + + Don't build DGA when it's not available, or when we don't want it. + + Signed-off-by: Chris Wilson + +commit 78dc0c04745ad4485b994f67833f4a155749f01d +Author: Daniel Stone +Date: Tue Jul 10 00:32:13 2012 +0100 + + i810: Make XAA optional + + Don't build XAA when it's not available, or when we don't want it. + + Signed-off-by: Daniel Stone + +commit 45ab003a5860fd4290df24739d2520fddfe27a8f +Author: Chris Wilson +Date: Mon Jul 9 21:28:40 2012 +0100 + + sna: Check for overlapping glyphs within each list, then overlapping lists + + Spotted by Zhigang Gong is this optimisation to avoid the problem with + multiple lines passed in a single request (using multiple lists). As the + start of line will overlap with the previous line when we use the simple + bbox comparison, we always declare those runs as overlapping and so we + cannot substitute a glyph mask. However, we can reduce the problem to + only checking for overlapping glyphs within a list and then checking for + overlapping lists. Very, very clever. + + Signed-off-by: Chris Wilson + +commit 8066bc33d78e78ce7c13833b08a7daaea2f3ed22 +Author: Chris Wilson +Date: Mon Jul 9 11:25:11 2012 +0100 + + sna: Fix reversal of inside logic for BitmapToRegion + + Signed-off-by: Chris Wilson + +commit 8a9a17cd092d156272e8953974119f527b2b77eb +Author: Chris Wilson +Date: Mon Jul 9 11:12:12 2012 +0100 + + sna: Improve the check for assertions + + Signed-off-by: Chris Wilson + +commit b11bc37684181390fc1400afb44054785104ca15 +Author: Chris Wilson +Date: Mon Jul 9 11:09:16 2012 +0100 + + sna: Simplify the DBG incarnation + + It was only ever used in conjunction with HAS_DEBUG_FULL. For debug + purposes it is as easy to redefine DBG locally. By simplifying the DBG + macro we can create it consistently and so reduce the number of compiler + warnings. + + Long term, this has to be dynamic. Sigh. + + Signed-off-by: Chris Wilson + +commit 21798a88676e91049917fafd3196dd4374b94226 +Author: Chris Wilson +Date: Mon Jul 9 09:23:20 2012 +0100 + + sna: Promote large operations to use the whole GPU + + Signed-off-by: Chris Wilson + +commit 1b6ad7a6ae6820c8f66d1c80613885ee84e7d316 +Author: Chris Wilson +Date: Mon Jul 9 08:54:11 2012 +0100 + + sna: Only consider large clears as candidates for GPU migration + + If we only operating on a small region of the pixmap and have require + damage migration in the past, we are likely to require migration again + at some point. So keep track of small damage areas. + + Signed-off-by: Chris Wilson + +commit d8a75538ea1d2a79d6282b0e2dfd73cfdea1a480 +Author: Chris Wilson +Date: Mon Jul 9 08:38:39 2012 +0100 + + sna: PadPixmap only writes to the out-of-bounds bits + + So we only need to delcare it as reading the source pixmap and not mark + it as damaged. + + Signed-off-by: Chris Wilson + +commit eafb454edf188e7dada1ddf886d1e46f0151968d +Author: Chris Wilson +Date: Mon Jul 9 08:38:08 2012 +0100 + + sna: Rename conflicting symbols with uxa + + Reported-by: Christoph Reiter + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51887 + Signed-off-by: Chris Wilson + +commit 0af29175a087cc2e509962f8828790c8f7232611 +Author: Chris Wilson +Date: Mon Jul 9 01:24:23 2012 +0100 + + sna: Just use a linear scan to find the terminating clip box + + Signed-off-by: Chris Wilson + +commit 2941a5fe15626730869a48a63bb088e8ae2c0549 +Author: Chris Wilson +Date: Mon Jul 9 00:20:57 2012 +0100 + + sna: Remove the consideration of CPU damage for overwriting FillRect + + We consideer a singular FillRect to be a sequence point in the rendering + commands, that is it is usually used to clear the background as the first + operation in a drawing sequence. So it is useful to ask if we can move + the sequence to the GPU at that point. + + Signed-off-by: Chris Wilson + +commit 8be00b6d4767ffc09328d246d02ee75312ad5842 +Author: Chris Wilson +Date: Sun Jul 8 20:48:40 2012 +0100 + + sna: Substitute the reduce clip region for fallback ops + + Signed-off-by: Chris Wilson + +commit 0457935a70f6c1ae06f61f9ad0dd1bdc825465fa +Author: Chris Wilson +Date: Sun Jul 8 20:38:03 2012 +0100 + + sna: Review placement hints for fallback operations + + Look for those operations that maybe better via the GTT and those that + are preferred to be in CPU cache. The wonders of multiple layers of + heuristics. + + Signed-off-by: Chris Wilson + +commit b7f0b0e7e3f66165b87c46f897de536cf74a9daf +Author: Chris Wilson +Date: Sun Jul 8 19:59:34 2012 +0100 + + sna: Remove function for force-to-gpu + + This is now enitrely done in the core move-to-gpu as a special case. + + Signed-off-by: Chris Wilson + +commit bb8770158c08394c2de79e0ca1c1b3112e17dd23 +Author: Chris Wilson +Date: Sun Jul 8 18:53:25 2012 +0100 + + sna: Apply the clear color when resizing the front buffer + + If the existing front buffer is clear, just apply the clear color to + then new buffer rather than copy the old one across. + + Signed-off-by: Chris Wilson + +commit 8dd14855d75240501aa2d089bcdfa46e7badbf18 +Author: Chris Wilson +Date: Sun Jul 8 15:46:41 2012 +0100 + + sna/dri: Review stale comments + + Signed-off-by: Chris Wilson + +commit 3bb7a530e77a5c6e8bae0fb14c570feafe37c2bd +Author: Chris Wilson +Date: Sat Jul 7 20:53:27 2012 +0100 + + sna/dri: Fix cross-chaining of pageflip vs vblank + + And double-check that the drawable is still flippable before completing + the delay exchange. + + Signed-off-by: Chris Wilson + +commit 1454df8caa51fff9810a9b792d17aa82b247a4ae +Author: Chris Wilson +Date: Sat Jul 7 19:59:50 2012 +0100 + + sna/dri: Use draw ref directly + + As we hook into the DestroyWindow notification, we can reliably use the + original Drawable reference and avoid the secondary object lookups. + + Signed-off-by: Chris Wilson + +commit 9abb6c09bdb9831db5f0626eed70663a2dc39fc6 +Author: Chris Wilson +Date: Sat Jul 7 18:43:06 2012 +0100 + + sna/dri: Remove dead code for 'old_fb' + + The member still exists but is never set and is unused. + + Signed-off-by: Chris Wilson + +commit ad877abdc70b842afd202b2f97892d97a0b8d151 +Author: Chris Wilson +Date: Sat Jul 7 17:48:52 2012 +0100 + + sna/dri: Attach the chain of frame events to the Window, not pixmap + + So that we can have multiple clients swapping in separate windows + concurrently. + + Signed-off-by: Chris Wilson + +commit 81cd9aa80091b9bb08b50062f117d678a3bc7a91 +Author: Chris Wilson +Date: Sat Jul 7 16:12:49 2012 +0100 + + sna: Tweak start/stop of the deferred flush + + As we now emit work whenever we wakeup and find the GPU idle, we rarely + actually have pending work in the deferred flush queue, so try to avoid + installing a timer if we are not accumulating work. + + Signed-off-by: Chris Wilson + +commit 6cb0c631e4eafc09f1677c73906de9108d735de4 +Author: Chris Wilson +Date: Sat Jul 7 15:10:18 2012 +0100 + + sna/dri: Clarify the message for one failure case + + Signed-off-by: Chris Wilson + +commit 9a314d18cef1e08b23f9dca861ad2ba396bb1080 +Author: Chris Wilson +Date: Sat Jul 7 14:56:05 2012 +0100 + + sna/dri: Add a couple of missing VG_CLEAR on vblanks + + Signed-off-by: Chris Wilson + +commit 66a53c15cb5ee729fb43ea9713fd8538a3f982ad +Author: Chris Wilson +Date: Sat Jul 7 14:46:08 2012 +0100 + + sna/dri: Couple the frame events into DestroyWindow + + Signed-off-by: Chris Wilson + +commit 975a566bed72ddc79853b329307ed72a82df24b0 +Author: Chris Wilson +Date: Sat Jul 7 14:12:51 2012 +0100 + + sna/dri: Replace the DRI2 drawable type with a devPrivate + + Signed-off-by: Chris Wilson + +commit 0da1c98f660269806408af5fd08c1ab5e538082e +Author: Chris Wilson +Date: Sat Jul 7 12:15:28 2012 +0100 + + test: Add missing header for distcheck + + Signed-off-by: Chris Wilson + +commit e3e58123d36924c760ab6f58a7155a040422e91d +Author: Chris Wilson +Date: Fri Jul 6 15:22:26 2012 +0100 + + sna: Fixup fb wrapper + + To accommodate changes in the Xserver and avoid breakage; would have been + much easier had the fb been exported in the first place. + +commit 5d2f88fd9972c62c87098ddc7fee7b6f0cea0fdb +Author: Chris Wilson +Date: Sat Jul 7 10:07:51 2012 +0100 + + sna: Add a couple of DBG flags to control upload buffers + + Signed-off-by: Chris Wilson + +commit 18b3090381ac0fb61df96a7c6b2f12aacf180ee8 +Author: Chris Wilson +Date: Sat Jul 7 00:06:36 2012 +0100 + + sna: Fixup USE_INPLACE debug hint + + After we enabled inplace readback, we can just apply the INPLACE hint to + all fallbacks, but instead apply it to the automatic testing for a + potential inplace operation. + + Signed-off-by: Chris Wilson + +commit 24b59a8955eb15522ad334a541530aca937fcf07 +Author: Chris Wilson +Date: Fri Jul 6 14:16:36 2012 +0100 + + sna: Refactor a common function: is_clipped() + + Had I done this earlier, I would not have the bug in the open-coded + version. Le sigh. + + Signed-off-by: Chris Wilson + +commit 68b357454af705f1ed3a9599435a402f2611a180 +Author: Chris Wilson +Date: Fri Jul 6 10:58:06 2012 +0100 + + sna: Clear garbage from the new front buffer when resizing + + Avoid displaying a buffer filled with random junk when resizing (and + thereby creating a new) framebuffer. + + Signed-off-by: Chris Wilson + +commit 5784e0f21dc91f33c99a507105a0695cc53d6574 +Author: Chris Wilson +Date: Fri Jul 6 09:42:37 2012 +0100 + + Allow matching against any device supported by drm/i915 + + However we cannot enable acceleration if we do not recognise its + hardware layout or instruction set. + + Signed-off-by: Chris Wilson + +commit 1ee10cc3b2aa0888753eeb25c7fde7296a3c92eb +Author: Chris Wilson +Date: Fri Jul 6 00:01:58 2012 +0100 + + Make the detection of broken pre-production hardware verbose + + These SDV should have been returned to the manufacturer long ago and + replaced with real systems. So if they are still in use, add a gentle + reminder. + + Signed-off-by: Chris Wilson + +commit cd2dd3016e0834d1636aa96511608022a4cdbcd1 +Author: Chris Wilson +Date: Thu Jul 5 19:58:54 2012 +0100 + + sna: Fix clipping of glyphs-to-dst for partially obscurred windows + + Signed-off-by: Chris Wilson + +commit 0f086acb259d7732560c5d0d642308de028a4445 +Author: Chris Wilson +Date: Wed Jul 4 12:26:18 2012 +0100 + + sna: Fallback to attaching a shadow fb if we fail to setup the crtc + + As we've chosen to fix the kernel to handle CRTC offsets > 4096, drop + the automatic workaround. However, allow the user to force creation of + PerCrtcPixmaps for the purpose of debugging (and to workaround the bug + in older kernels) and to fallback to trying a shadow fb if the setcrtc + fails with the composite fb. + + Signed-off-by: Chris Wilson + +commit 7e8060f837475c85cc061ba4a5388140cd227613 +Author: Chris Wilson +Date: Thu Jul 5 03:31:12 2012 +0100 + + sna: Do not force GPU allocation if CPU bo is already busy + + Signed-off-by: Chris Wilson + +commit c32bb286dc9a489232030f6abe9076411fbcecfd +Author: Chris Wilson +Date: Thu Jul 5 03:18:12 2012 +0100 + + sna: Make sure damage is flushed to the CPU bo before use + + Signed-off-by: Chris Wilson + +commit d46cc00b3cd903bfaf37ad7d4a60676c4b346983 +Author: Chris Wilson +Date: Thu Jul 5 02:19:26 2012 +0100 + + sna/dri: Assert that our pixmaps sizes are invariant + + Signed-off-by: Chris Wilson + +commit 3c1f58fe45e8f4f18c45733f862ca1f290dde84d +Author: Chris Wilson +Date: Wed Jul 4 23:03:44 2012 +0100 + + sna: drop an unused ret var + + Signed-off-by: Chris Wilson + +commit a69a47f94037698a360f8b8611f6f3e58a20ca87 +Author: Chris Wilson +Date: Wed Jul 4 22:15:45 2012 +0100 + + sna: Fix detection of EIO through throttle + + When using drmIoctl, one needs to check the errno for the actual error + code. + + Signed-off-by: Chris Wilson + +commit f2fdb0da83d6208c884ffde2bb30d0a67fc75217 +Author: Chris Wilson +Date: Wed Jul 4 21:43:22 2012 +0100 + + sna: Use throttle() to confirm a GPU hang + + This has two effects. The first is that we confirm that the EIO was + indeed a GPU hang and not some other form of I/O failure (for example + swapin). And the second is that it means we also print the warning to + look for an i915_error_state when we detect a GPU hang. + + Signed-off-by: Chris Wilson + +commit b8c2b34e39c7f2ee2597f8727b9b98c6aac93fb1 +Author: Chris Wilson +Date: Wed Jul 4 19:53:27 2012 +0100 + + sna: Simplify timer execution + + Signed-off-by: Chris Wilson + +commit 844ab84c64fde38db315787e16a9f7f674d0f88c +Author: Chris Wilson +Date: Wed Jul 4 17:58:27 2012 +0100 + + sna: Fix leak around ENOMEM error path in sna_copy_boxes + + Signed-off-by: Chris Wilson + +commit 54ee41bf05e328ed2f2cd2a64c21afe3efe2556a +Author: Chris Wilson +Date: Wed Jul 4 17:40:58 2012 +0100 + + sna: Pass a hint to the backends when using copy_boxes for readback + + If we expect to only emit this set of copy_boxes() and then submit the + batch, we would prefer to use the BLT for its lower latency. + + Signed-off-by: Chris Wilson + +commit d36623aaebdc454bd281f34332edcad5d94f34c0 +Author: Chris Wilson +Date: Wed Jul 4 13:55:25 2012 +0100 + + sna/dri: Remove broken code for buffer xchg from AsyncSwap + + Signed-off-by: Chris Wilson + +commit 0bdb4d0d3693df007a6cfc9a75bb0deddd812d53 +Author: Chris Wilson +Date: Wed Jul 4 13:12:43 2012 +0100 + + sna/dri: Fixup blit fallback path to use xchg when possible + + Signed-off-by: Chris Wilson + +commit aeeed323f9081875a804ae19fb356bee2a61e7b0 +Author: Chris Wilson +Date: Wed Jul 4 11:52:27 2012 +0100 + + sna/dri: Select the appropriate copy engine based on the current src ring + + Signed-off-by: Chris Wilson + +commit 5026b6a147f411582af24ffd17c87a81da5eea0b +Author: Chris Wilson +Date: Wed Jul 4 09:39:59 2012 +0100 + + uxa: Install the drm_wakeup_handler for vblank events in !use_page_flipping + + Even if page-flipping itself is disabled, we still want to allow the + client to schedule wakeups for some future vblank which requires + listening to the kernel vblank notifications. + + Reported-by: Eric Anholt + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51699 + Signed-off-by: Chris Wilson + +commit 79309dd55f20098e12ead5427c811f237d5592fa +Author: Chris Wilson +Date: Tue Jul 3 22:27:39 2012 +0100 + + sna: check for failure to change cache level on the bo + + Signed-off-by: Chris Wilson + +commit 9e2ac8a413c05aafd1c69775c5b0fa5f1f37ac23 +Author: Chris Wilson +Date: Tue Jul 3 19:33:55 2012 +0100 + + sna: Use set-cache-level ioctl to create CPU bo + + As an alternative to vmap, we can use the kernel for all memory + management through bo, which is much preferred for its simplicity (i.e. + avoiding introducing even more vm complexity). + + Signed-off-by: Chris Wilson + +commit f26163e916e21f6b64a19c147165f2f2c9c5466d +Author: Chris Wilson +Date: Tue Jul 3 18:51:46 2012 +0100 + + sna: Guess when the client is attempting to read back the whole pixmap + + Signed-off-by: Chris Wilson + +commit c597e6cd4cb4406878eae07c04ad420d8185d99e +Author: Chris Wilson +Date: Tue Jul 3 13:26:33 2012 +0100 + + sna: Fix iterator typo + + Increment the iterator, not the end-stop. + + Signed-off-by: Chris Wilson + +commit 2d087eadd9cd3aa2e2ccd73a568286d21702d29a +Author: Chris Wilson +Date: Tue Jul 3 11:54:02 2012 +0100 + + sna: Also prefer to use the dst GPU bo if CopyArea reduces to an inplace upload + + Signed-off-by: Chris Wilson + +commit dbe3a5ca1e6558bcee29d893aba8cc352220a36d +Author: Chris Wilson +Date: Tue Jul 3 11:48:15 2012 +0100 + + sna: Attempt to reduce all-damage on the CPU + + As we now treat CPU all-damaged as a special case for deciding when and + where to migrate, look out for that condition after adding damage. + + Signed-off-by: Chris Wilson + +commit 3a41248195e8b327a5d970726450bd2077cdaf0f +Author: Chris Wilson +Date: Tue Jul 3 11:22:54 2012 +0100 + + sna: Operate on the original boxes for CopyArea + + Be consistent and avoid the confusion when mixing operations on the + region boxes and the original boxes. + + Signed-off-by: Chris Wilson + +commit e3bc91842bf186ec149c852f48993235ef7ad27f +Author: Chris Wilson +Date: Tue Jul 3 10:21:06 2012 +0100 + + sna: Allow booting on older kernels by disabling HW acceleration + + Signed-off-by: Chris Wilson + +commit affdebcb2d09cd8fdc5aadb2d8df3193587e4a06 +Author: Chris Wilson +Date: Mon Jul 2 18:50:26 2012 +0100 + + sna: And free the DIR after use + + Signed-off-by: Chris Wilson + +commit e7b31b6d0a32f76db4a8aef64c77d4afe808fb6c +Author: Chris Wilson +Date: Mon Jul 2 14:01:36 2012 +0100 + + sna: Consolidate CopyArea with the aim of reducing migration ping-pong + + Signed-off-by: Chris Wilson + +commit ce27a81ac508368d54f1237893a9b1214cf3e3d0 +Author: Chris Wilson +Date: Mon Jul 2 17:52:24 2012 +0100 + + sna: Clear cpu flag after deciding to use gpu bo + + Signed-off-by: Chris Wilson + +commit 2f1b7e8a23ac3086dda0025ecf09dd1feac94837 +Author: Chris Wilson +Date: Mon Jul 2 17:53:01 2012 +0100 + + sna: Check for non-existent /sys/class/backlight directory + + Signed-off-by: Chris Wilson + +commit d12d50d107d403c3cf4dfe24bb63ce1006d0e025 +Author: Chris Wilson +Date: Mon Jul 2 14:09:21 2012 +0100 + + sna: Skip hidden and special entries inside /sys/class/backlight + + Just to avoid the warnings after fallback to comparing the d_name to + the list of known interfaces. + + Signed-off-by: Chris Wilson + +commit e80f9c4670a0e84521907b1baa059322784b1558 +Author: Chris Wilson +Date: Mon Jul 2 10:21:42 2012 +0100 + + sna: Prefer backlight iface based on /sys/class/backlight/*/type + + Signed-off-by: Chris Wilson + +commit 61e16dc5673a1ac96b2ecee072cc3e80971be5d9 +Author: Tom Hughes +Date: Mon Jul 2 10:23:56 2012 +0100 + + Add asus-nb-wmi backlight control + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51593 + +commit 543816011d05f0cf40b05ec58f87a5954397a224 +Author: Chris Wilson +Date: Sun Jul 1 18:36:55 2012 +0100 + + sna/gen7: Correct two minor misues of equivalent GEN6 constants + + Signed-off-by: Chris Wilson + +commit 839fea7f779ca63c32817ee4ba695dfce3344980 +Author: Chris Wilson +Date: Sun Jul 1 18:23:38 2012 +0100 + + sna/gen6: Boost VS entries to maximum + + Signed-off-by: Chris Wilson + +commit fbd114507d9bf2e2b1d1e52c5e42dc6cdbd8c9a0 +Author: Chris Wilson +Date: Sun Jul 1 14:03:31 2012 +0100 + + sna/dri: Assert that the replacement bo is large enough for the pixmap + + Just another paranoid sanity check. + + Signed-off-by: Chris Wilson + +commit 675cbd5fade91fd6a6bf533a31b0a211237af6e8 +Author: Chris Wilson +Date: Sun Jul 1 12:39:13 2012 +0100 + + sna/trapezoids: Skip the division when converting coverage to floating point + + Signed-off-by: Chris Wilson + +commit 182c3637cc5d3a6ce52127087aa2f19ca2b42719 +Author: Chris Wilson +Date: Sun Jul 1 13:23:44 2012 +0100 + + sna: If the pixmap is marked for flushing, prefer to use the GPU + + Again, to avoid the forced ping-pong as we upload the damage after + nearly every operation, simply prefer to use the GPU in such cases. + + Signed-off-by: Chris Wilson + +commit 35b1ac138002c206a6d6b866d49a0d73705dd3ac +Author: Chris Wilson +Date: Sun Jul 1 10:53:07 2012 +0100 + + sna: After an operation on the CPU, prefer not to use the GPU + + A nasty habit of applications is to fill an area, only to read it back + with GetImage, render locally and replace with PutImage. This causes a + readback of an active bo everytime, so let's try to mitigate that by + preferring not to use the GPU after a forced readback. + + Signed-off-by: Chris Wilson + +commit e625c02e6266403fcd8a72ccce2c6c6291e2e5fc +Author: Chris Wilson +Date: Sat Jun 30 09:34:21 2012 +0100 + + sna/damage: Early check for contains-box? if subtract and box outside region + + Signed-off-by: Chris Wilson + +commit abd7be1cee6f2f494a11cd9d2e7888c3043ffc02 +Author: Chris Wilson +Date: Fri Jun 29 15:32:10 2012 +0100 + + sna/dri: Prefer GPU rendering if no more CPU damage on a DRI bo + + Signed-off-by: Chris Wilson + +commit 67b87e4f7cf6c3ab9cfccc9fe43a824bfe84f393 +Author: Chris Wilson +Date: Fri Jun 29 15:03:12 2012 +0100 + + sna/dri: Optimise clip reduction with copy-to-front to an unclipped Window + + Signed-off-by: Chris Wilson + +commit eae5e1275cd11703de2bca67dacd1d57129b561a +Author: Chris Wilson +Date: Fri Jun 29 13:12:52 2012 +0100 + + sna: Install the ModeSet handler as the base handler + + This way we can safely ignore it across server regen. + + Signed-off-by: Chris Wilson + +commit 15a0761cad862a5d73bbc2af81bc5267e66c307e +Author: Chris Wilson +Date: Fri Jun 29 12:22:55 2012 +0100 + + sna: Only consider the request list when deciding whether the GPU is busy + + Micro-optimisation to overhead extra checks and to make sure an + unflushed bo doesn't prevent us from submitting more work before + sleeping. + + Signed-off-by: Chris Wilson + +commit 4061f05dd61a7200d91d30b9b4a2ab0c61306870 +Author: Chris Wilson +Date: Fri Jun 29 11:40:18 2012 +0100 + + sna/trapezoids: Write unaligned fallback boxes inplace + + As this is a pure write operation (though we will write the edge pixels + twice) we can perform this operation inplace and incur a slightly slower + trap creation at the benefit of avoiding the later copy. + + Signed-off-by: Chris Wilson + +commit 44e41536b7728c03a4899a97242960ae7ed35624 +Author: Chris Wilson +Date: Fri Jun 29 11:39:47 2012 +0100 + + sna/trapezoids: Render the partial left-edge of fallback unaligned boxes + + Signed-off-by: Chris Wilson + +commit e6f9bfe1e20c4c76822d77598f4f1c7e10754929 +Author: Chris Wilson +Date: Fri Jun 29 11:06:33 2012 +0100 + + sna: Use currentTime rather than GetTimeInMillis() + + The overhead of reading the hpet() on every block handler (more or less) + is exorbitant, so trust that we update currentTime frequently enough to + be a good approximation - the side effect is that we will wakeup + slightly to earlier from using an old value for the current time. + + Signed-off-by: Chris Wilson + +commit c6c4f30e194eb3b8a2421134bb005f1542b3ef9f +Author: Chris Wilson +Date: Fri Jun 29 10:14:52 2012 +0100 + + sna: Add assertions to check that we do install the timers + + Signed-off-by: Chris Wilson + +commit 87c8f5a47e3abb7ff887aab45b6389cf9b8d8008 +Author: Chris Wilson +Date: Fri Jun 29 09:33:09 2012 +0100 + + sna: Make the post-flip delay explictit + + As the kernel is inconsistent in enforcing this across generations, + handle the synchronisation of the pageflip explicity. Ultimately this + should be replaced with a tripple buffer mechanism. + + Signed-off-by: Chris Wilson + +commit 31caa43a21a68174386682fd558c911c7c03d76f +Author: Chris Wilson +Date: Thu Jun 28 17:05:46 2012 +0100 + + sna/gen5: Check harder for need_upload() fallbacks + + Signed-off-by: Chris Wilson + +commit 7c3eb1fda9e567a300a8138acdac9ec11e010b11 +Author: Chris Wilson +Date: Thu Jun 28 17:04:26 2012 +0100 + + sna: Correct inverted logic for checking xrgb drawables + + Reported-by: Christoph Reiter + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51472 + Signed-off-by: Chris Wilson + +commit c3e2c1332d8d5a3944df99cc11aa66c586add3e8 +Author: Chris Wilson +Date: Thu Jun 28 12:34:36 2012 +0100 + + sna: Fix the application of the crtc offset for posting damage + + The damage boxes are in framebuffer (source) space, so we need to apply + the offset for the boxes in crtc (destination) space. + + Signed-off-by: Chris Wilson + +commit 47e6bfa4f40cf7efcfe7eee24d2512d737fd7e89 +Author: Chris Wilson +Date: Thu Jun 28 12:24:27 2012 +0100 + + sna: Force use of per-crtc scanout if the offset is too large + + On gen4+, the scanout offset into a tiled surface is specified through + the DSPTILEOFF register and limited to 12bits of precision. So if we + have a CRTC positioned in that nether-region, we need to allocate a + separate per-crtc pixmap for it and perform shadowing. + + Signed-off-by: Chris Wilson + +commit 93e77ee019248fe77483e83f2210d584bb5d1be2 +Author: Chris Wilson +Date: Thu Jun 28 12:02:32 2012 +0100 + + sna: Quieten kernel debug complaints when disabling crtc + + Even if we are obviously turning the crtc off, it still complains if the + number of connectors is non-zero. So make it so. + + Signed-off-by: Chris Wilson + +commit 85e4f48a87ddbc227af8f4af5ea46ae17902b111 +Author: Chris Wilson +Date: Thu Jun 28 11:44:45 2012 +0100 + + sna: Add a DBG to the periodic flush mechanism + + Signed-off-by: Chris Wilson + +commit 87dd6408a5c29e4808283df78a981de0a3c0a79c +Author: Chris Wilson +Date: Thu Jun 28 10:53:59 2012 +0100 + + sna: Correct the reversal of the periodic flushing semantics + + Regression from 1e9319d (sna: extend RandR to support super sized + monitor configurations) which tried to take into account the need to + flush the shadow CRTC bo in addition to the normal scanout bo. In the + refactoring of the need_flush(), the double negative was missed. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 05f486f64bc7ea4a8a71f5d792fa586ac0843414 +Author: Chris Wilson +Date: Thu Jun 28 10:42:21 2012 +0100 + + sna: Flush the per-crtc render caches for rotated scanouts + + We need to manually flush the render cache in order for results to be + visible on the scanout. + + Signed-off-by: Chris Wilson + +commit db7979981032d5647069f213a063dcbf78e57890 +Author: Chris Wilson +Date: Wed Jun 27 09:36:58 2012 +0100 + + sna: s/width/height/ cut'n'paste typo + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit fcbbe1664ae62ae275068cc040f385d2320d5213 +Author: Chris Wilson +Date: Wed Jun 27 09:30:44 2012 +0100 + + sna: Remove a trailing ';' + + The unwanted ';' caused is_cpu() to always return false if a GPU bo was + attached. Not necessary a bad thing, just misses the potential + optimisation where having chosen to prefer to use the CPU path we then + have to migrate to the GPU even though the bo is undamaged or idle. + + Spotted-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit a072ab506569ecff5b4c57fa90f7a417db69f33b +Author: Chris Wilson +Date: Tue Jun 26 17:24:37 2012 +0100 + + test: Add client side copy to FakeFront for emulating CopyBuffer correctly + + The server manages FakeFront following a flip, but it the client + optimises a swap by replacing it with a CopyRegion, it is expected to + also update the FakeFront itself. Replicate that behaviour so that the + timings for the test case are consistent with mesa. + + Signed-off-by: Chris Wilson + +commit 96804c74f8f0d19fc1b9db467cf050f4934fe83b +Author: Chris Wilson +Date: Tue Jun 26 17:09:45 2012 +0100 + + test: FakeFront rules + + Oh my, I just once again rediscovered the copy on every flip due to the + requirement for keeping FakeFront uptodate for reads after a SwapBuffers. + + Signed-off-by: Chris Wilson + +commit f306cd557ef263ff5057e413c335cc75bc0f7895 +Author: Chris Wilson +Date: Tue Jun 26 14:59:37 2012 +0100 + + sna/dri: Hold a reference to the cached DRI2 buffer on the front buffer + + Signed-off-by: Chris Wilson + +commit a87f2b9325bfad2bb3f93226706b6f9a09598945 +Author: Chris Wilson +Date: Sun Jun 24 13:48:38 2012 +0100 + + sna/gen4: Check for peculiar initial values for the surface offset + + Signed-off-by: Chris Wilson + +commit 8f4221a2520b7ed1f67b41185c2e4842e83e53ef +Author: Chris Wilson +Date: Tue Jun 26 15:56:50 2012 +0100 + + test: Add a simple exercise for DRI2 swap paths + + Signed-off-by: Chris Wilson + +commit a505015a254d6c6e24f0542bc141cde873dc6f34 +Author: Chris Wilson +Date: Mon Jun 25 22:50:47 2012 +0100 + + sna: Force DPMS to be on following a modeset + + Similarly to UXA, this papers over inconsistent behaviour in the kernel + in handling the DPMS upon a modeswitch. + + Signed-off-by: Chris Wilson + +commit b7a8c94cdb9cf42a31f8ce128d70e23458ba2042 +Author: Chris Wilson +Date: Mon Jun 25 20:49:59 2012 +0100 + + sna: remove the assert(0)s along error paths + + This were there as a debugging aide to see if we ever hit unreachable + code paths - mainly along corruption inducing GPU wedged recovery paths. + They are superfluous and just scare the reader. + + Signed-off-by: Chris Wilson + +commit 15c0ee445f603033c82f357fedfc7737d198d7b3 +Author: Chris Wilson +Date: Sun Jun 24 19:28:03 2012 +0100 + + sna/gen5: Tweak thread allocations + + Bump the alloted number of threads to their max. Using more threads than + cores helps hide the stalls due to sampler fetch, math functions and urb + write. Specifying too many threads seems to not incur a performance + regression, suggesting that the hardware scheduler is sane enough not to + overpopulate the EU. + + A small but significant boost, peak x11perf -aa10text on an i3-330m is + raised from 1.93Mglyphs/s to 2.35Mglyphs/s. + + Signed-off-by: Chris Wilson + +commit fa10005ce31483827547b7f71eae066899f0026c +Author: Chris Wilson +Date: Sat Jun 23 17:28:00 2012 +0100 + + sna/dri: Perform an exchange for a composited windowed SwapBuffers + + If the front buffer is not attached to the scanout and has not been + reparented, we can simply exchange the underlying bo between the + front/back attachments and inform the compositor of the damage. + + Signed-off-by: Chris Wilson + +commit 53d735ddb16b0204662b8584aa22998ba53deec1 +Author: Chris Wilson +Date: Sat Jun 23 10:16:44 2012 +0100 + + sna/dri: Queue windowed swaps + + Implement "tripple-buffering" for windowed SwapBuffers by allowing the + client to submit one extra frame before throttling. That is we emit the + vsync'ed blit and immediately unblock the client so that it renders to + the GPU (which is guaranteed to be executed after the blit so that its + Front/Back buffers are still correct) and requests another SwapBuffers. + The subsequent swapbuffers are appended to the vsync chain with the + blit/unblock then executed on the vblank following the original blit. + That is both the client and xserver render concurrently. + + Signed-off-by: Chris Wilson + +commit 1e9319d5f56583be99f573f208cebb0ee3b5cc26 +Author: Chris Wilson +Date: Fri Jun 22 11:22:16 2012 +0100 + + sna: extend RandR to support super sized monitor configurations + + With the introduction of the third pipe on IvyBridge it is possible to + encounter situations where the combination of the three monitors exceed + the limits of the scanout engine and so prevent them being used at their + native resolutions. (It is conceivable to hit similar issues on earlier + generation, especially gen2/3.) One workaround, this patch, is to extend + the RandR shadow support to break the extended framebuffer into per-crtc + pixmaps. + + Signed-off-by: Chris Wilson + +commit e8b090902e788257610374deae659f01a91888f3 +Author: Chris Wilson +Date: Fri Jun 22 22:01:37 2012 +0100 + + sna/gen3+: Remove stale assertions for cached vbo + + Following the previous commit, we reset the vbo when it becomes idle + rather than discard it. As such, the assertions to check that we are + discarding the vbo are now bogus. + + Signed-off-by: Chris Wilson + +commit 565297e6bd3457a150036af9c62fe0dc67b794ac +Author: Chris Wilson +Date: Thu Jun 21 13:53:02 2012 +0100 + + sna/gen3+: Keep vbo cached + + Once we switch to using a vbo, keep it cached (resetting everytime it is + idle) until we expire our caches. + + Signed-off-by: Chris Wilson + +commit d806973e21cd46e605b3cd405323ae7a64c12798 +Author: Chris Wilson +Date: Thu Jun 21 12:57:13 2012 +0100 + + sna: Micro-optimise search_inactive_cache + + Discard the unneeded next parameter to drop a memory reference in a hot + path, and don't wait for a retirement if we are looking in a larger + bucket than suits. + + Signed-off-by: Chris Wilson + +commit d39fef0a7f3daf5c07686b44e4dea01c0f06c77a +Author: Chris Wilson +Date: Thu Jun 21 12:25:35 2012 +0100 + + sna: Tiles are only 128 bytes wide on gen2 + + Signed-off-by: Chris Wilson + +commit 4f2dde1fa3b04b27bae8fc0bca9c824bd362d23b +Author: Chris Wilson +Date: Thu Jun 21 10:31:24 2012 +0100 + + sna/gen7: Eliminate the pipeline stall after a non-pipelined operation + + Signed-off-by: Chris Wilson + +commit 3ef05a8d0833203e265aff392f225a11a11c2d01 +Author: Chris Wilson +Date: Thu Jun 21 09:36:42 2012 +0100 + + sna/gen7: Do not emit a pipeline stall after a non-pipelined command + + Signed-off-by: Chris Wilson + +commit 4501e131e6b737cb8f2581c8b1f7ea9d29a8e912 +Author: Chris Wilson +Date: Thu Jun 21 16:38:32 2012 +0100 + + sna/gen7: prefer using RENDER copy + + Further testing and the balance of doubt swings in favour of using the + 3D pipeline for copies. + + For small copies the BLT unit is faster, + 2.14M/sec vs 1.71M/sec for comppixwin10 + + And for large copies the RENDER pipeline is faster, + 13000/sec vs 8000/sec for comppixwin500 + + I think the implication is that we are not efficiently utilising the EU + for small primitives - i.e. something that we might be able to improve. + + Signed-off-by: Chris Wilson + +commit 3da56c48b7820ec77d704c5a16670eb86a6f673f +Author: Chris Wilson +Date: Wed Jun 20 15:14:23 2012 +0100 + + sna/gen7: Prefer using BLT rather than redirect for copies + + Signed-off-by: Chris Wilson + +commit b1f8386db6e9b3eea1bdbf8cde90f33792640ce8 +Author: Chris Wilson +Date: Wed Jun 20 23:28:14 2012 +0100 + + sna/gen7: Emit a pipeline flush after every render operation + + For whatever reason, this produces a 30% improvement with the fish-demo + (500 -> 660 fps on i7-3730qm at 1024x768). However, it does cause about + a 5% regression in aa10text. We can appear to alleviate that by only + doing the flush when the composite op != PictOpSrc. + + Signed-off-by: Chris Wilson + +commit d02e6d81420a114c9622bbdaf90fc3ae5d4b15a7 +Author: Chris Wilson +Date: Thu Jun 21 16:10:02 2012 +0100 + + Encode the third pipe using the HIGH_CRTC shift for vblanks + + The original vblank interface only understood 2 pipes (primary and + secondary) and so selecting the third pipe (introduced with IvyBridge) + requires use of the HIGH_CRTC. Using the second pipe where we meant the + third pipe could result in some spurious timings when waiting on the + vblank. + + Reported-by: Adam Jackson + Signed-off-by: Chris Wilson + +commit f8b67be8d3b5d5cbe730ba5dba3edd2d30a99d9f +Author: Chris Wilson +Date: Wed Jun 20 12:39:19 2012 +0100 + + sna: Don't clear the needs_flush flag after emitting a flush on the busy bo + + We use that flag to check whether we need to check whether the bo is + still busy upon destruction, so only clear it if the bo is marked as + idle. + + Signed-off-by: Chris Wilson + +commit 5419bbb483af595d7021e49debef7700c599217e +Author: Chris Wilson +Date: Wed Jun 20 11:21:52 2012 +0100 + + sna/gen7: Prefer BLT for copies + + It's faster for where the cost of the extra batches and ring switching + do not dominate... + + Signed-off-by: Chris Wilson + +commit 1c0bb8c4c93a43e2932429a9f6c23d91f1be2060 +Author: Chris Wilson +Date: Wed Jun 20 10:57:40 2012 +0100 + + sna/gen7: Keep using RENDER paths for large pixmaps + + As the 3D pipeline is quite versatile and we only need to force BLT if + we cannot extract the subregion. + + Signed-off-by: Chris Wilson + +commit b238f64e8a53883cfe7c568e37ef18bbee77996e +Author: Chris Wilson +Date: Wed Jun 20 10:46:59 2012 +0100 + + sna/gen[67]: Prefer to not force BLT paths for large pixmaps + + The sampler can in fact handler subregions of large pixmaps quite well, + and so we prefer to keep using the 3D pipeline so long as the operation + fits in. If not, then switch to the BLT in order to avoid the temporary + surface dance. + + Signed-off-by: Chris Wilson + +commit 38f06a351fdd35fa5c6136e9a25e034a812a94c2 +Author: Chris Wilson +Date: Tue Jun 19 22:22:12 2012 +0100 + + uxa: Fix second regression in glyph fallback from 64a4bc + + To complete my show of incompetence for the evening, not only do we have + to restore the original source when compositing the mask onto the + destination, we also need to restore the original dst (rather than + composite the mask onto the mask!). + + Signed-off-by: Chris Wilson + +commit fda9faee755cb35906ca1179a568332ef2de35a5 +Author: Chris Wilson +Date: Tue Jun 19 21:01:47 2012 +0100 + + uxa: Use the original src for fallback glyph compositing + + In 64a4bcb8cefff, I introduced a WHITE source for the purposes of + accumulating the glyph mask correctly. Unfortunately I neglected to + restore the original source picture for compositing the glyph mask on + the destination, resulting in a use-after-free and then corruption. + + Reported-by: Maarten Lankhorst + Signed-off-by: Chris Wilson + +commit 8141e290b1ac7c4d1524bb389a84a8f375df4634 +Author: Chris Wilson +Date: Tue Jun 19 20:24:33 2012 +0100 + + sna: Explain why we ignore the busy status result during kgem_bo_flush() + + Signed-off-by: Chris Wilson + +commit eb1d07624e5aeb7b5db7ceb46975091e92185d63 +Author: Chris Wilson +Date: Tue Jun 19 16:00:13 2012 +0100 + + sna: Ensure extents is initialised if short-circuit use-cpu-bo + + As we may attempt to end up using the GPU bo is the CPU bo is busy, we + need to make sure we have initialised the damage extents first. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 9f216e159bd05ddd269eb8ddf3ca7a407c2901e2 +Author: Chris Wilson +Date: Tue Jun 19 15:57:31 2012 +0100 + + sna: Assert expected return values + + Keep the semantic analyser happy by consuming the expected return value + with an assert. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 2dc93b2a6c832ce8b972de90d09080e860dcd40f +Author: Chris Wilson +Date: Tue Jun 19 15:34:09 2012 +0100 + + sna: Check results from syscalls + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 06634604abf15fdd27dd007fcf81595da994146b +Author: Chris Wilson +Date: Tue Jun 19 15:28:43 2012 +0100 + + Initialise adaptors to 0 in case xf86XVListGenericAdaptors does not + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 8bfea58dbc634cadc399d3132030c591e086880c +Author: Chris Wilson +Date: Tue Jun 19 15:26:18 2012 +0100 + + sna: Minor cleanups from sematic analyser in DBG + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 0a43d425670b883b04565296c0510e7ba03ba6de +Author: Chris Wilson +Date: Tue Jun 19 14:46:58 2012 +0100 + + uxa: Implement glyphs-to-dst to avoid fallbacks + + An earlier version was buggy and introduced corruption as it failed to + fallback gracefully with ComponentAlpha glpyhs. This is a much simpler + implementation that composites each glyph individually, leaving it to the + backend to optimise away state changes. It should still be many times + faster than incurring the fallback... + + Reported-by: Oleksandr Natalenko + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50508 + Signed-off-by: Chris Wilson + +commit 64a4bcb8ceffff8e4ee448d8a467620596703509 +Author: Chris Wilson +Date: Tue Jun 19 13:42:12 2012 +0100 + + uxa: Use (white IN glyph) ADD mask to compose the glyph mask + + As pointed out by Soren Sandmann and Behdad Esfahbod, it is essential to + use white IN glyph when adding to the mask so that the channel expansion + is correctly performed when adding to an incompatible mask format. + + For example, loading alpha as the source results in the value 000a being + added to the rgba glyph mask (for mixed subpixel rendering with + grayscale glyphs), whereas the desired value is aaaa. + + Signed-off-by: Chris Wilson + +commit 99845dcb3ba862269b29aec782e2bcef31c0403e +Author: Chris Wilson +Date: Tue Jun 19 10:37:10 2012 +0100 + + Post Damage on the Screen Pixmap after a pageflip + + This issue was raised by Dave Airlie as he is trying to integrate + multiple GPUs into the xserver, and a particular setup has a slave + rendering device that copies the contents from the GPU over a + DisplayLink USB adaptor. As such the slave device is listening for + Damage on the Screen Pixmap and needs the update following pageflips. + Since we already are posting damage for all the SwapBuffers paths other + than pageflip, for consistency we should post damage along the pageflip + path as well. + + Reported-by: Dave Airlie + Signed-off-by: Chris Wilson + +commit 4acf727941a37651f672db3774281a437940c540 +Author: Chris Wilson +Date: Tue Jun 19 10:20:54 2012 +0100 + + sna: Initialize the color value for fallback unaligned boxes + + Reported-by:Zdenek Kabelac + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=5047 + Signed-off-by: Chris Wilson + +commit b0b2d3c9663c29e9844aef1608416ae40c194b55 +Author: Chris Wilson +Date: Tue Jun 19 00:41:35 2012 +0100 + + sna: Avoid copying unintialised data during source picture upload + + If we have never written to a pixmap, then there will be neither a GPU + or shadow pointer and we would attempt to copy a NULL pointer. In this + case as the user is expecting to copy unintialised data we are at + liberty to replace those undefined values with the clear color. + + Signed-off-by: Chris Wilson + +commit 38472fcc53c5dceb98b96458183e6729b8311a43 +Author: Chris Wilson +Date: Tue Jun 19 00:37:12 2012 +0100 + + sna: Double check that the source is busy before performing indirect reads + + Signed-off-by: Chris Wilson + +commit 8cdfb8c24c8b49c88451714d80293c66d63e8c01 +Author: Chris Wilson +Date: Tue Jun 19 00:36:41 2012 +0100 + + sna: Fix up the shadow pointer on the source when copying + + Signed-off-by: Chris Wilson + +commit 17f3a83fdc8c0ef5c12fb4be34d86021c0c865e5 +Author: Chris Wilson +Date: Mon Jun 18 23:48:16 2012 +0100 + + sna: Review sna_copy_boxes + + A couple of ordering issue and more assertions. + + Signed-off-by: Chris Wilson + +commit a9045699b9cd66d0b0d96bfc964458c96845f97f +Author: Chris Wilson +Date: Mon Jun 18 23:47:21 2012 +0100 + + sna: Reset region after transferring to cpu + + If we adjust the region for the pixmap offset, be sure that we reset it + before returning it back to the caller. + + Signed-off-by: Chris Wilson + +commit 9f51311a7d95bf4bc23926b8e6bf8ee52afd180c +Author: Chris Wilson +Date: Mon Jun 18 23:45:50 2012 +0100 + + sna: Check if the busy is truly busy before commiting to an indirect upload + + Signed-off-by: Chris Wilson + +commit 291b3c4367b455bfc5a772f8caaeee73f36d826a +Author: Chris Wilson +Date: Mon Jun 18 23:43:00 2012 +0100 + + sna: Align upload buffers to 128 + + This seems to be a restriction (observed on 965gm at least) that we + have incoherent sampler cache if we write within 128 bytes of a busy + buffer. This is either due to a restriction on neighbouring cachelines + (like the earlier BLT limitations) or an effect of sampler prefetch. + + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=50477 + Signed-off-by: Chris Wilson + +commit 39e5c7491535999643c1761bb1602ad757ab486c +Author: Chris Wilson +Date: Mon Jun 18 21:58:27 2012 +0100 + + sna: Assert damage is valid after every addition + + Even more paranoia than just checking upon migration. + + Signed-off-by: Chris Wilson + +commit 92e1693e5fb3a1dd89fca5e5ecc660e2de78f9cd +Author: Chris Wilson +Date: Mon Jun 18 21:26:58 2012 +0100 + + sna: Validate cpu/gpu damage never overlaps + + References: https://bugs.freedesktop.org/show_bug.cgi?id=50477 + Signed-off-by: Chris Wilson + +commit d2312c8f958002e54ddcb834f37916f4b46ac291 +Author: Chris Wilson +Date: Mon Jun 18 21:29:29 2012 +0100 + + sna: Fixup tracking of vmap upload buffers + + Signed-off-by: Chris Wilson + +commit 75e9eeca7e998b1ee3f8b0df780adae1b9e5b408 +Author: Chris Wilson +Date: Mon Jun 18 16:39:20 2012 +0100 + + sna: Remove overlapping CPU damage when operating inplace on the GPU + + Otherwise we gradually introduce garbage into the picture. + + Reported-by: Zdenek Kabelac + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50477 + Signed-off-by: Chris Wilson + +commit a936466dd41c4bb8b0956c4da5a5838f991b332a +Author: Chris Wilson +Date: Mon Jun 18 11:36:53 2012 +0100 + + sna: Prefer to attempt a Composite operation rather than use pixman composite + + As pixman composite performance is atrocious for anything other than + solids, prefer to upload the mask and attempt a composite operation on + the GPU unless we are forcing the fallback. + + Signed-off-by: Chris Wilson + +commit 4b325d6e2b99ec3f63a7c5175f6f4746f6773550 +Author: Chris Wilson +Date: Mon Jun 18 11:24:55 2012 +0100 + + sna: Fix rendering of unaligned boxes through pixman + + Not only do we need to make sure the source is available to the CPU, we + need to actually check the right conditions for clipping the box. + + Signed-off-by: Chris Wilson + +commit caef27492b5a70bd46a09cd5094b2c93e38e39ea +Author: Chris Wilson +Date: Sun Jun 17 20:56:46 2012 +0100 + + sna: convert another instance of applying the clear to the CPU pixmap + + Signed-off-by: Chris Wilson + +commit 8695c4c77666cd07eab51efcbc7c4f11c85250fd +Author: Chris Wilson +Date: Sun Jun 17 16:53:53 2012 +0100 + + sna: Fix the blt composite op with no-ops + + When returning early because the operation is a no-op, we still need to + fill in the function pointers to prevent a later NULL dereference. + + Signed-off-by: Chris Wilson + +commit 7905ddae1dbc8805d0fadbd6d21c7a5df7e715fc +Author: Chris Wilson +Date: Sun Jun 17 17:01:12 2012 +0100 + + sna: Further refine choice of placement when uploading source data. + + The goal is cheaply spot a simple copy operation that can be performed + on the CPU without having to load both parties onto the GPU. + + Signed-off-by: Chris Wilson + +commit 5a675b61f27273f7ef344d4056dbba1f8cd97737 +Author: Chris Wilson +Date: Sun Jun 17 15:42:17 2012 +0100 + + sna: Correct typo forcing everything to be clear to 0! + + Signed-off-by: Chris Wilson + +commit b55bf1abbe71281e3d9ebde1c4005d40902d5e7f +Author: Chris Wilson +Date: Sun Jun 17 14:14:44 2012 +0100 + + sna: Fix cut'n'paste errors in tiling debug + + Rename for different variables + + Signed-off-by: Chris Wilson + +commit 9756c60b4ad15281d025b9c27f19d19e8a630958 +Author: Chris Wilson +Date: Sun Jun 17 11:39:33 2012 +0100 + + sna/gen7: Enable non-rectilinear spans + + Seems we have enough GPU power to overcome the clumsy shaders. Just + imagine the possibilities when we have a true shader for spans... + + Signed-off-by: Chris Wilson + +commit 41aff56a1f452e409c7a49512a1d2824b74f3838 +Author: Chris Wilson +Date: Sun Jun 17 10:50:31 2012 +0100 + + sna: Add tiling for spans + + Semmingly only advisable when already committed to using the GPU. This + first pass is still a little naive as it makes no attempt to avoid empty + tiles, nor aims to be efficient. + + Signed-off-by: Chris Wilson + +commit 222e6ff43ef683e82101fb360911fc01fbe00597 +Author: Chris Wilson +Date: Sat Jun 16 23:40:30 2012 +0100 + + sna: Read inplace for fallback copies + + Signed-off-by: Chris Wilson + +commit 79d468925bb012806e097337e4e5930818c6ab46 +Author: Chris Wilson +Date: Sat Jun 16 17:54:21 2012 +0100 + + sna: Decrease latency for 1x1 GetImage by using an inplace mapping + + Signed-off-by: Chris Wilson + +commit 2c2a8d3780f1d8de3f13bee8e068fdaf608ff9e9 +Author: Chris Wilson +Date: Sat Jun 16 23:19:49 2012 +0100 + + sna: Allow reads to be performed inplace + + If we can guess that we will only readback the data once, then we can + skip the copy into the shadow. + + Signed-off-by: Chris Wilson + +commit bc6997f6f751d3ba352dfc20c6717ec12b8fac47 +Author: Chris Wilson +Date: Sat Jun 16 17:54:15 2012 +0100 + + sna: Cleanup damage processing after operating inplace + + Signed-off-by: Chris Wilson + +commit 937ca8a5d8a0f70a0724db1519bb7b5fc0857425 +Author: Chris Wilson +Date: Sat Jun 16 17:53:58 2012 +0100 + + sna: Use memset for simple clears + + Signed-off-by: Chris Wilson + +commit de4572b0b52e2fcfcad04660ee2f81ee88d500a5 +Author: Chris Wilson +Date: Sat Jun 16 13:40:26 2012 +0100 + + sna: Inspect CPU damaged state when deciding upon Composite placement + + Signed-off-by: Chris Wilson + +commit b689cd924c500373e1e293dd9eb54a238e400381 +Author: Chris Wilson +Date: Fri Jun 15 16:25:51 2012 +0100 + + sna: Composite traps inplace if the CPU is already all-damaged + + One outcome is that inspecting the usage patterns afterwards indicated + that we were missing an opportunity to reduce unaligned boxes to an + inplace operation. + + Signed-off-by: Chris Wilson + +commit ae3c0963790cfb6f984ed4ad3ecbaae492775e1b +Author: Chris Wilson +Date: Fri Jun 15 16:25:51 2012 +0100 + + sna: Composite glyphs inplace if the CPU is already all-damaged + + Signed-off-by: Chris Wilson + +commit eaed58b2baf30eaea37be06cfc1d9d81059aba27 +Author: Chris Wilson +Date: Sat Jun 16 12:55:54 2012 +0100 + + sna: Tweak placement of operations + + Take in account busyness of the damaged GPU bo for considering placement + of the subsequent operations. In particular, note that is_cpu is only + used for when we feel like the following operation would be better on + the CPU and just want to confirm that doing so will not stall. + + Signed-off-by: Chris Wilson + +commit 8eac098962891a5deb7c53d36c6dec57c7f2b972 +Author: Chris Wilson +Date: Sun Jun 17 09:51:12 2012 +0100 + + sna/gen3: Add another DBG for dropping vbo + + Signed-off-by: Chris Wilson + +commit 515c8b19d638d4a811b159ef0dc7cf4059e30217 +Author: Chris Wilson +Date: Fri Jun 15 15:41:14 2012 +0100 + + sna: Prefer to operate inplace if already mapped of the GPU is wholly dirty + + Signed-off-by: Chris Wilson + +commit d1713941e9db3e7a6d83466be1b253978fb4bf01 +Author: Chris Wilson +Date: Fri Jun 15 15:29:59 2012 +0100 + + sna: Tweaks for DBG missing glyphs through fallbacks + + Signed-off-by: Chris Wilson + +commit 2b23605efba009fb340ec10b37d54caae159b9b1 +Author: Chris Wilson +Date: Fri Jun 15 15:28:31 2012 +0100 + + sna: Don't trim prepare for glyphs_via_mask + + If we pass the expected width/height without passing the per-glyph + offset into the preparation function, we make the erroneous mistake of + analysing the glyph cache only for the mask extents and so will miss + glyphs that we need to upload for the operation. + + Signed-off-by: Chris Wilson + +commit 9f66b27114fcc457fa5cb2d5889e875384f89e75 +Author: Chris Wilson +Date: Fri Jun 15 13:47:33 2012 +0100 + + sna: Remove mark-as-cpu after gem_pread + + The kernel no longer moves the read bo into the CPU domain, so remove + the last vestiges of that tracking. + + Signed-off-by: Chris Wilson + +commit bfd88d5429528b0162eafcc9496bfd1c708b60cd +Author: Chris Wilson +Date: Fri Jun 15 11:21:29 2012 +0100 + + sna: Silence a few compiler warnings + + Nothing harmful, just noise. + + Signed-off-by: Chris Wilson + +commit b3659beec8c4126de5da4df5cb2cc077b7af6c0b +Author: Chris Wilson +Date: Fri Jun 15 11:08:18 2012 +0100 + + sna: Check for zero-sized damage regions after trimming Windows to their pixmaps + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 293a867ea55d3004f5be21b1d0ad765a89c28a5a +Author: Chris Wilson +Date: Thu Jun 14 23:02:10 2012 +0100 + + sna: Specialise the self-copy blitter to handle vertically overlapping copies + + Signed-off-by: Chris Wilson + +commit 3b76ab995bb70da5f76afead7c696cb7fd72b158 +Author: Chris Wilson +Date: Thu Jun 14 22:33:11 2012 +0100 + + sna: Add a little bit more DBG to migration IO paths + + Signed-off-by: Chris Wilson + +commit 49543522e789a0a8213c164b37a18c0642e60ac4 +Author: Chris Wilson +Date: Thu Jun 14 20:25:21 2012 +0100 + + sna: Fix reversed assertion + + Darn the double negative! After adding damage we want to assert that + the region is not empty, not !not empty. + + Signed-off-by: Chris Wilson + +commit 4e50467b4f50b522a07bedae7ff68b9c37362af8 +Author: Chris Wilson +Date: Thu Jun 14 17:40:09 2012 +0100 + + uxa: Force the outputs to off for consistency with xf86DisableUnusedFunctions() + + Upon a VT switch, we set the desired modes and turn off the DPMS on any + unused output. Make this explicit so that we always maintain consistency + between the kernel and X's list of enabled CRTCs. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=50772 + Signed-off-by: Chris Wilson + +commit 3a56a0b10eb3ab07efd28efdc79d0fd3a6fa20ff +Author: Chris Wilson +Date: Thu Jun 14 19:26:42 2012 +0100 + + sna: Make the disable-unused after vt switch distinct from DPMS off + + So that we do not lose control over dpms on/off! + + Signed-off-by: Chris Wilson + +commit b415ca05c2e1c4f09f85d8769d39e5369661ed3a +Author: Chris Wilson +Date: Thu Jun 14 17:06:19 2012 +0100 + + sna: Reset damage extents after reduction goes to zero + + If the reduction of the damage clears all of the boxes, we need to reset + the -infinite extents so that we continue to accumulate further damage. + + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=50744 + Signed-off-by: Chris Wilson + +commit 0df7c488640d3590d2a88dc353b72167b6644eaa +Author: Chris Wilson +Date: Thu Jun 14 16:09:38 2012 +0100 + + sna: Supporting overlapping copies for fallback blits + + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=50393 + Signed-off-by: Chris Wilson + +commit d5b273b20b7d917d08af120815c28b1618d3342c +Author: Chris Wilson +Date: Thu Jun 14 15:35:24 2012 +0100 + + sna: Explicitly disable the CRTC so that xserver/kernel agree after VT switch + + References: https://bugs.freedesktop.org/show_bug.cgi?id=50772 + Signed-off-by: Chris Wilson + +commit 221534abe2dc04fae8b8fc332104bca275d4863b +Author: Chris Wilson +Date: Wed Jun 13 22:48:43 2012 +0100 + + sna: Only reduce damage addition to a region operation if clean + + Some paths bypass operating upon the region as they do not have an + YX-banded set of boxes and so prefer to defer the costly construction of + the region till later. As a result, we have to be careful not to + overwrite any existing information if we do operate on the region after + setting the dirty boxes. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50744 + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 0db789e180b6b01fb8aff547879387058f52a0b9 +Author: Zdenek Kabelac +Date: Wed Jun 13 14:26:37 2012 +0200 + + sna: Constification + + Adding preserving const modifiers to decrease amount of const warnings + + Signed-off-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 33998a7080aa7f50ba922c764c6a93fe951c5b64 +Author: Zdenek Kabelac +Date: Wed Jun 13 14:26:36 2012 +0200 + + sna: Fix typo and compare y1 to y2 + + It seems 'y1' was meant to be compared here + + Signed-off-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 0ade32fbad4014efcc8aa8ed4cd0f8a39f9ab107 +Author: Chris Wilson +Date: Wed Jun 13 14:28:43 2012 +0100 + + sna: Fix operator preference around a | b & c | d + + Tell the compiler what we really mean is a | (b & (c | d)) + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 20f3114ccd63052b4fd06ef1d87efaaabbbac7ac +Author: Chris Wilson +Date: Wed Jun 13 14:27:10 2012 +0100 + + sna: Use long for simplicity when printing size_t values for debugging + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 6f75b8da6a468188dd0c00015395424598b3f502 +Author: Zdenek Kabelac +Date: Wed Jun 13 14:26:33 2012 +0200 + + sna: Valgrind updates + + Add some mising initialization for unknown ioctl + + Signed-off-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 70cf637ca47c9e67758e09c7e1d10eef51db1f98 +Author: Zdenek Kabelac +Date: Wed Jun 13 14:26:32 2012 +0200 + + legacy/i810: Fix declaration to match definition + + Signed-off-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 5fea2478cd5ab4156c182210d28c5e27e5f67403 +Author: Chris Wilson +Date: Wed Jun 13 14:10:01 2012 +0100 + + Lots of trivial semantic fixes + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit e499f207c161d1b3cd75f065dc89021ff5f40b63 +Author: Chris Wilson +Date: Wed Jun 13 13:11:17 2012 +0100 + + sna: Fix memleak from sna_crtc_find_plane() + + Signed-off-by: Chris Wilson + +commit 49da55da518348fc6b88e09d5132dd1b1d751304 +Author: Chris Wilson +Date: Wed Jun 13 11:20:41 2012 +0100 + + sna: Free the reversed glyph bits along with the font + + Signed-off-by: Chris Wilson + +commit 9f68c7fe6aa34ab17d82489fca5f63a3ce335444 +Author: Chris Wilson +Date: Wed Jun 13 11:15:42 2012 +0100 + + sna: Free clip rectangles after intersection with PolyRectangle extents + + Signed-off-by: Chris Wilson + +commit ab3b7fe31b5a9d7924e959f21d29c4f7352ec8cb +Author: Chris Wilson +Date: Wed Jun 13 10:35:14 2012 +0100 + + sna: Only reuse a write buffer if all external references have been dropped + + This avoids the unhappy situation of overwriting an upload buffer that + we intend to use for a fallback. + + Signed-off-by: Chris Wilson + +commit e8cb656dc4bab1489df9dfb4cb64704b2a9fa34b +Author: Chris Wilson +Date: Wed Jun 13 08:10:10 2012 +0100 + + sna: Free clip intersection with line extents after use + + Signed-off-by: Chris Wilson + +commit 572745eb243a96819c8fa248f4ffdd703ed13b0f +Author: Chris Wilson +Date: Tue Jun 12 22:49:05 2012 +0100 + + sna/damage: Remove unused return value + + Signed-off-by: Chris Wilson + +commit aefc0417dde8b2137a787459a69d91c14902f22b +Author: Chris Wilson +Date: Tue Jun 12 22:47:41 2012 +0100 + + sna/damage: Simplify initialisation of damage extents + + Just use the already computed region->extents when adding the first box. + + Signed-off-by: Chris Wilson + +commit 78a96e812b912c5b25a02670f603f455f93e9d00 +Author: Chris Wilson +Date: Tue Jun 12 21:43:31 2012 +0100 + + sna: Refresh the damage self-tests + + They had bitrotted with the revamp and needed some massaging to update + to the new interfaces. + + Signed-off-by: Chris Wilson + +commit 6138f7434a6fb014299a7e9a8392ef962c8cba30 +Author: Cyril Brulebois +Date: Tue Jun 12 21:19:14 2012 +0100 + + Fix up braindamage in previous commit. + + ickle: Fixing up my idiotic change, obviously too much birthday cake. + +commit 224d631a232d3536e0f1f2780bfbe1218ee7590f +Author: Cyril Brulebois +Date: Tue Jun 12 21:14:53 2012 +0100 + + Avoid calling xf86nameCompare() with a NULL string + + Device sections without a Driver property would lead to a server + segfault because of a NULL pointer's being passed as the second + argument of xf86nameCompare(). + + Debian bug #677206 + + Signed-off-by: Cyril Brulebois + +commit 3b9b64c7c9b5b0bfaafb97c9a9fe5849bbb412da +Author: Dave Airlie +Date: Tue Jun 12 10:26:34 2012 +0100 + + uxa: do copy fb at startup. + + Copy the current framebuffer for smooth wayland->gdm handoff. + + This has been hanging around in Fedora for too long now, and we've + dropped the feature a few times, and yes I know the Simpsons did it^W^W^W + SNA does it. + + I've updated the code to have some of the better fixes from nouveau. + + I've no idea who wrote this code either, krh or ajax. [ickle: The + earliest version I've found had krh's fingerprints on it, though it may + still have been a joint effort.] + + Signed-off-by: Dave Airlie + [ickle: improve error handling, only copy the fb during initial takeover] + +commit b6525702b9ffd21beb8ea6bb10a8ad5ce7f9de14 +Author: Chris Wilson +Date: Tue Jun 12 11:59:31 2012 +0100 + + sna: Hook up AdjustFrame() + + Looks to be unused by the core, just a solitary invocation in an obscure + extension it seems. However the implementation looks trivial so + incorporate it until it is finally removed, just in case. + + Signed-off-by: Chris Wilson + +commit 7b281d1300127d65392aaadbbe2299fa9e1749a9 +Author: Chris Wilson +Date: Tue Jun 12 10:37:04 2012 +0100 + + sna: Remove a pair of empty stub functions + + The export wrappers for the glyph cache constructor/destructor existed + in case there was a need to add more routines. Since that never + happened, remove the extra step of indirection. + + Signed-off-by: Chris Wilson + +commit 392e33a62d729c64c57699505220b4029e015470 +Author: Chris Wilson +Date: Mon Jun 11 09:51:41 2012 +0100 + + sna: Instrument memory/bo allocations for monitoring over time + + Hide it behind --enable-debug=memory to avoid incurring the cost for + everybody. + + Signed-off-by: Chris Wilson + +commit 4e984b79cce038ba5026d8bdd93dec9b5a6ced8a +Author: Chris Wilson +Date: Mon Jun 11 09:02:03 2012 +0100 + + configure: Correct the help string for --with-default-accel + + Prior to finalizing the defaults I changed my mind and realised that the + default had to reflect the current behaviour of someone enabling SNA for + the first time, and not the previous behaviour of --enable-sna to + override UXA. This is so that distro's could offer an SNA enabled DDX + for the brave whilst not affecting their typical no-xorg.conf users. + + Signed-off-by: Chris Wilson + +commit 7614a541886dd9eb5c9d441e2618785e9cc53a65 +Author: Chris Wilson +Date: Sun Jun 10 09:36:38 2012 +0100 + + configure: Harden --with-default-accel against simple mistakes + + If the user specifies no options, assume automatic selection. Then + double check we found a valid backend and so avoid later breaking the + build. + + Signed-off-by: Chris Wilson + +commit ea0209fbc12fca282bd8ef72223791bf163801ce +Author: Chris Wilson +Date: Fri Jun 8 22:44:23 2012 +0100 + + sna: Remove option to disable vmap + + It works everywhere, so when it is finally enabled, let it be. + + Signed-off-by: Chris Wilson + +commit 18baa1428b1c4c0a49927d4c32db091db9e4e97b +Author: Chris Wilson +Date: Fri Jun 8 22:43:01 2012 +0100 + + Make the enum list of options consistent with the actual table. + + Signed-off-by: Chris Wilson + +commit adc872a9654dc18d778323ca0721704878ad3851 +Author: Chris Wilson +Date: Fri Jun 8 06:44:20 2012 +0100 + + sna: Add DBG spew to flink() + + Signed-off-by: Chris Wilson + +commit a62ad4e80722db187766c83a16fa84ec236cc5eb +Author: Chris Wilson +Date: Thu Jun 7 23:37:59 2012 +0100 + + sna: Skip flushing the active queue if there is not a suitable bo pending + + Signed-off-by: Chris Wilson + +commit 318982566bbc7145847bd03601087150eef7a8d8 +Author: Chris Wilson +Date: Thu Jun 7 21:56:04 2012 +0100 + + sna/dri: Disable experimental code by default + + Since these require non-upstream patches to other components, we don't + want it enabled by default and randomly breaking builds. + + Signed-off-by: Chris Wilson + +commit ebf84b8e572b5cb1a509000d412dfa5be3d1aca3 +Author: Chris Wilson +Date: Thu Jun 7 20:15:53 2012 +0100 + + sna/trapezoids: Micro-optimise cell allocation + + The pool is a fixed size so we can delete the generic code to handle + variable sizes. + + Signed-off-by: Chris Wilson + +commit 0a25fc68c5cd82cad4b99b0f2357f430c8783c3f +Author: Chris Wilson +Date: Thu Jun 7 19:13:09 2012 +0100 + + sna: Actually create Y-tiled source pixmaps + + An inconsistency highlighted by 7c51cabaecac revealed that we had a + mismatch between the check in move_to_gpu() and how we created the + pixmap. This mismatch resulted in us creating and uploading tiled + pixmaps for single shot textures, and the increase aperture pressure was + causing a regression in firefox-fishbowl on pnv, for example. + + Signed-off-by: Chris Wilson + +commit c58d137d3eeb0e97bfd53e68404e04d9012b5697 +Author: Chris Wilson +Date: Thu Jun 7 11:18:27 2012 +0100 + + sna: Suppress DBG prints along potential SIGIO paths + + As ErrorF/fprintf is not re-entrant due to its mutex we can not use DBG + from code that could be called by a signal handler. X's SIGIO handler + attempts to move the cursor from within the handler (eek!) and so we + need to be careful not to take any locks, such in as the aforementioned + fprintf, along the cursor paths. + + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=50744 + Signed-off-by: Chris Wilson + +commit 3f5b94f3d1625b06840c6441a0b175604ee3d2f9 +Author: Chris Wilson +Date: Wed Jun 6 17:24:07 2012 +0100 + + sna: Check against integer overflows when computing cache size + + Even with a 1nm process, I doubt we will see 4+GiB cache sizes ;-) + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 902391bd798775e1a7a53503d4dd1756162f737f +Author: Chris Wilson +Date: Wed Jun 6 17:20:39 2012 +0100 + + uxa: Remove dead-code for SourcePictures + + All SourcePictures are now converted into Drawables, which had been + assumed by the driver backend. However, the code still existed to + attempt to pass procedural pictures onwards and so set pSrcPix to NULL + which was being flagged by the static analyser as a potential NULL + dereference. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 3d8a1f7176877975a31ad7a6548fa8309065f617 +Author: Chris Wilson +Date: Wed Jun 6 17:15:42 2012 +0100 + + sna/gen4+: Add missing "fall through" comments + + Reported-by: + Signed-off-by: Chris Wilson + +commit 8ae4407c43e6a8d26784508f61b416138f908132 +Author: Chris Wilson +Date: Wed Jun 6 17:13:05 2012 +0100 + + sna: Silence static analyser complaining about potential NULL pointer + + Add an assert to prove that is not. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 08010b23a3e2bc37d202251923fac814b18fa501 +Author: Chris Wilson +Date: Wed Jun 6 17:10:35 2012 +0100 + + uxa/dri: Silence static analyser for potential NULL intel_pixmap + + If the intel_pixmap was NULL we should have failed to create the DRI2 + buffer, so we can safely assert here to keep the analyser quiet. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 06b1b875ba13227ddaf7f28dbdcdaa3eb49f0857 +Author: Chris Wilson +Date: Wed Jun 6 17:05:13 2012 +0100 + + uxa/i915: check for failure to allocate temporary destination + + If the target drawable is too large for the render pipeline, we need to + create a temporary surface. This may fail, so abort if it does. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit c553dcae2dd714cac413ffc7c7779cd78c9a3e61 +Author: Chris Wilson +Date: Wed Jun 6 17:04:01 2012 +0100 + + sna: Silence a few unused function warnings + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 536033b4edb40db18210e5272eb8ce9703e5e364 +Author: Chris Wilson +Date: Wed Jun 6 16:02:47 2012 +0100 + + legacy/i810/dri: Check for malloc failure for BusIdString + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit b2da80c1d1058dca5d3d85693918e53d9fa61dd3 +Author: Chris Wilson +Date: Wed Jun 6 15:59:54 2012 +0100 + + sna: Add some missing 'fall through' comments + + Static analysers are dumb and presume readers are too. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit c433fb4521e2fb65a555489bd09ba6bb9448b72f +Author: Chris Wilson +Date: Wed Jun 6 15:17:30 2012 +0100 + + uxa/dri: Fix up typo from f2513cb0f + + s/true/FALSE/? Wrong. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 1675f441049d559d891fe378e437c12db21df9e7 +Author: Chris Wilson +Date: Wed Jun 6 12:55:13 2012 +0100 + + uxa/dri: Transfer reference of the new_back buffer to the flip_chain + + In order to prevent a leak of the bo when the chain is eventually + torn-down when the client exits. + + Reported-by: Andreas Lampersperger + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50670 + Signed-off-by: Chris Wilson + +commit 18726a4975ab2ddf85eaa6eb1602dcbe599217f7 +Author: Chris Wilson +Date: Wed Jun 6 10:58:49 2012 +0100 + + sna: Perform CopyArea directly onto a CPU bo if available + + Signed-off-by: Chris Wilson + +commit 57d7d5de78bcf01d75d7a7de03fe50a2a9bd1b7e +Author: Chris Wilson +Date: Wed Jun 6 00:08:17 2012 +0100 + + sna: Use GPU for readback onto CPU bo + + Time to blt from GTT to LLC 16384 bytes: 125.000µs (snb) + Time to blt from GTT to LLC 16384 bytes: 71.000µs (ivb) + Time to blt from GTT to LLC 1048576 bytes: 1400.000µs (snb) + Time to blt from GTT to LLC 1048576 bytes: 938.000µs (ivb) + + Time to copy from GTT to LLC 16384 bytes: 118.000µs (snb) + Time to copy from GTT to LLC 16384 bytes: 134.000µs (ivb) + Time to copy from GTT to LLC 1048576 bytes: 6723.000µs (snb) + Time to copy from GTT to LLC 1048576 bytes: 7424.000µs (ivb) + + And conversely, + + Time to blt from LLC to GTT 16384 bytes: 10.000µs (snb) + Time to blt from LLC to GTT 16384 bytes: 8.000µs (ivb) + Time to blt from LLC to GTT 1048576 bytes: 217.000µs (snb) + Time to blt from LLC to GTT 1048576 bytes: 135.000µs (ivb) + + Time to copy from LLC to GTT 16384 bytes: 4.000µs (snb) + Time to copy from LLC to GTT 16384 bytes: 4.000µs (ivb) + Time to copy from LLC to GTT 1048576 bytes: 270.000µs (snb) + Time to copy from LLC to GTT 1048576 bytes: 179.500µs (ivb) + + It seems clear then that even with the extra synchronisation cost + copying from the GTT is much preferable with the GPU than using the + uncached reads by the CPU. Streaming write-combines from the CPU into + the GTT seem about as efficient as we can manage, so continue to use the + mapping unless busy. + + Signed-off-by: Chris Wilson + +commit f2513cb0fdb0d1214854fd4e4dcd477ba8583862 +Author: Chris Wilson +Date: Wed Jun 6 10:41:35 2012 +0100 + + uxa/dri: Do not use undeclared stdbool features + + The header isn't pulled in, so stop using the undefined values of + true/false. + + Signed-off-by: Chris Wilson + +commit 1dafb4777f8378c87f34feae667582498220204c +Author: Chris Wilson +Date: Tue Jun 5 21:25:40 2012 +0100 + + sna/damage: Add some assertions to validate that each damage box is non-empty + + References: https://bugs.freedesktop.org/show_bug.cgi?id=50744 + Signed-off-by: Chris Wilson + +commit c4eb5528a456b65c673f7c984d14a622ac67cdca +Author: Chris Wilson +Date: Tue Jun 5 16:04:16 2012 +0100 + + uxa: Check for DPMS off before scheduling a WAIT_ON_EVENT + + Regression from commit 3f3bde4f0c72f6f31aae322bcdc20b95eade6631 + Author: Chris Wilson + Date: Thu May 24 11:58:46 2012 +0100 + + uxa: Only consider an output valid if the kernel reports it attached + + When backporting from SNA, a key difference that UXA does not track DPMS + state in its enabled flag and that a DPMS off CRTC is still bound to the + fb. So we do need to rescan the outputs and check that we have a + connector enabled *and* the pipe is running prior to emitting a scanline + wait. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=50668 + Signed-off-by: Chris Wilson + +commit 7c51cabaecac52348766c622e80ed14b9854e54d +Author: Chris Wilson +Date: Tue Jun 5 12:59:46 2012 +0100 + + sna: Try to create Y-tiled pixmaps for initial source bo + + Signed-off-by: Chris Wilson + +commit a26c05cc8936cab28d83c6beeff906a910353338 +Author: Chris Wilson +Date: Tue Jun 5 12:48:33 2012 +0100 + + sna/gen2+: Tweak placement of operations for CPU-bound large pixmaps + + Try to avoid uncessary migration to the GPU of large pixmaps that are + wholly bound to the CPU. + + Signed-off-by: Chris Wilson + +commit a21bdbe3e312b40b936c5c68c84f5c1bc0f9fb88 +Author: Dave Airlie +Date: Tue May 22 15:44:28 2012 +0100 + + sna: port to compat api + + This ports SNA to the new compat-api. + + Signed-off-by: Dave Airlie + +commit 8f5001493e18b6b3b97ca5f0c923678a51975bd0 +Author: Dave Airlie +Date: Tue May 22 15:35:01 2012 +0100 + + intel: port legacy and uxa to new API. + + This ports the legacy and uxa driver to the new server API. + + Signed-off-by: Dave Airlie + +commit c9824827422f8ec4f46c9cba42d871c98dc54761 +Author: Dave Airlie +Date: Tue Jun 5 10:38:21 2012 +0100 + + sna: drop using block/wakeup data. + + These went away in the new server API, and really if this + made any measurable difference, I'd be impressed. + + Signed-off-by: Dave Airlie + +commit d9850a05003008d86d0b226bcd775aebdd43bccd +Author: Dave Airlie +Date: Tue Jun 5 10:04:48 2012 +0100 + + uxa: drop enable disable access hook + + This looks to be unused. + + Signed-off-by: Dave Airlie + +commit 99df720216787c52d16a350dd25469e2dcea2c47 +Author: Chris Wilson +Date: Tue Jun 5 10:24:34 2012 +0100 + + sna: Add inline keyword in conjunction with attribute(always_inline) + + Signed-off-by: Chris Wilson + +commit 47d7da5a986a9f133cd3dc8314ff243001586a36 +Author: Chris Wilson +Date: Tue Jun 5 10:18:40 2012 +0100 + + sna: Maintain the operation on the CPU if not completely replacing all-damaged + + We may as well continue the operation on the CPU if already bound to try to + reduce needless migrations (where the cost of the upload will outweigh + further use). + + Signed-off-by: Chris Wilson + +commit 81f09347f2ab59cf0a3eaca7be83ded555655e93 +Author: Chris Wilson +Date: Mon Jun 4 16:45:05 2012 +0100 + + uxa/i965: Silence static analyser by asserting the bo exists for the video + + This is already checked at the beginning of PutImageTextured, so this + check upon the return value of intel_get_pixmap_bo() should only be + required to keep static analysers happy. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 1f43de322b400dcd64eb4545a978ad9b1c7de185 +Author: Chris Wilson +Date: Mon Jun 4 15:39:39 2012 +0100 + + sna: Exclude consideration of tiling flags from overwriting BLT commands + + Signed-off-by: Chris Wilson + +commit ebb1c9d5f82e8822f7400ff11a887ab047a0d78e +Author: Chris Wilson +Date: Mon Jun 4 15:28:31 2012 +0100 + + sna: Make the bo-is-busy DBG more useful by saying which bo it is + + Signed-off-by: Chris Wilson + +commit 6dc5ddfe807b307ca10af971c4f84498b2fb82a2 +Author: Chris Wilson +Date: Mon Jun 4 13:49:35 2012 +0100 + + sna: Remove bogus check for color == 0 + + This was written when the RGBA color value was being passed around and + not the pointer to the xRenderColor. As such, the NULL deref check + doesn't gain much and the check for rgba==0 irrelevant in this scenario. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 9b3937228c692598899fb39bfe448a9b457315db +Author: Chris Wilson +Date: Mon Jun 4 13:47:58 2012 +0100 + + sna: Simplify selecting default tiling for framebuffers + + Signed-off-by: Chris Wilson + +commit ff91fd4a2749f1ea8722189aaec938e51bce4222 +Author: Chris Wilson +Date: Mon Jun 4 12:41:05 2012 +0100 + + uxa: Check for failure from drmModeGetConnector() + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 4712a4008aaff7b3c57a8dd0a5e639992c9b6d30 +Author: Chris Wilson +Date: Mon Jun 4 12:40:56 2012 +0100 + + shadow + +commit 63a55e9db97b647cbf7385403a0f30ee4d24dc3b +Author: Chris Wilson +Date: Mon Jun 4 12:36:11 2012 +0100 + + uxa/shadow: Free the buffer along the unexpected failure to attach to the pixmap + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit c9bd4ed7d7d5c9ba6924e911652e03abc9267865 +Author: Chris Wilson +Date: Mon Jun 4 12:29:58 2012 +0100 + + legacy/i810: Silence a compiler warning for missing 'const' + + Signed-off-by: Chris Wilson + +commit 6f8b411b8a833cca6fce8888ce515db6413d57ca +Author: Chris Wilson +Date: Mon Jun 4 12:21:27 2012 +0100 + + uxa: Preferred order for calloc is (count, size) + + And assert that the allocation succeeds for good measure. A great big + dollop of graceful failure is missing... + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 72a29aa74a1488269c2184300e573d060c49e232 +Author: Chris Wilson +Date: Mon Jun 4 12:21:27 2012 +0100 + + sna: Check that the buffer was allocated prior to caching it + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 9bff89b1892cee90a80909255876240126b700b2 +Author: Chris Wilson +Date: Mon Jun 4 12:21:27 2012 +0100 + + legacy/i810: Be paranoid and guard against xf86GetPciInfoForEntity + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit ed6004f7ad09329bd4097331aaff38edc83107b6 +Author: Chris Wilson +Date: Mon Jun 4 12:21:27 2012 +0100 + + uxa: Be paranoid and guard against xf86GetPciInfoForEntity + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit abb8d893742f4ba9567330da9706adda4e636e75 +Author: Chris Wilson +Date: Mon Jun 4 12:21:27 2012 +0100 + + sna: Be paranoid and guard against xf86GetPciInfoForEntity + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 782cd6eafa9917a5bdb181d66b7f4c05392950ba +Author: Chris Wilson +Date: Mon Jun 4 12:20:17 2012 +0100 + + uxa: check for failure to allocate drmModeCrtc + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit a99bf0125f8f166ff2d65449ecd376c99c3024b8 +Author: Chris Wilson +Date: Mon Jun 4 12:15:51 2012 +0100 + + uxa/i965: Drop superfluous 'state' variable + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 15a00ba047fdb7d388a322f2e33894d20787af2f +Author: Chris Wilson +Date: Mon Jun 4 12:09:52 2012 +0100 + + sna/gen2: Remove double 'const' + + So constant, we const'ed it twice. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 99129c369c16d9ff7588a0e59f9285cc339b7eb3 +Author: Chris Wilson +Date: Mon Jun 4 12:08:11 2012 +0100 + + sna/gen4+: Use an explicit invalid value for alu + + Since the static analyser also doesn't like comparing a uint8_t against + ~0. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit fae9c054d47203b68a6c09647945d23074ea4df9 +Author: Chris Wilson +Date: Mon Jun 4 12:04:30 2012 +0100 + + legacy/i810: Remove unused variable + + In order to reduce the volumes of output from static analysers. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 880ec2c9a56d3de33c7fbbfa4c043082fbcf7a78 +Author: Chris Wilson +Date: Mon Jun 4 12:04:30 2012 +0100 + + legacy/i810: Reorder DRI teardown code to avoid potential NULL derefs + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 7424ea7dd08e304baa4efa09e887b833737ac9f6 +Author: Chris Wilson +Date: Mon Jun 4 11:59:24 2012 +0100 + + uxa/dri: Free wait_info along DRI2WaitMSC error paths + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit ebd6dea009479e612c67d78416b8680bb23dba94 +Author: Chris Wilson +Date: Mon Jun 4 11:56:11 2012 +0100 + + uxa/dri: Make sure is_glamor_pixmap is always initialised + + The code paths are too twisty to be sure otherwise. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 33f0b4b96662d953052232b1c0477ced0c326a62 +Author: Chris Wilson +Date: Mon Jun 4 11:54:28 2012 +0100 + + legacy/i810: Free offscreen image info struct on failure + + Impossible with the current code, the server aborts on failure. However, + this looks to be the simple answer to keep static analysers quiet. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit d24340747389db971c04349d1ee517f195c2b28e +Author: Chris Wilson +Date: Mon Jun 4 11:53:26 2012 +0100 + + sna: Free clip boxes (if allocated) along error path + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 1215abc5c30cc3e183bde59b1523c09b59c484e3 +Author: Chris Wilson +Date: Mon Jun 4 11:49:15 2012 +0100 + + sna: Make the ignored return value explicit + + The return from __kgem_throttle_retire() is just a hint as to whether + any forward progress was made. In the case of the error path, though it + is a last ditch effort before aborting, so we do not really care whether + or not it succeeds, we must try again. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit e230b460515a043a1b7353d153e864754ca5e064 +Author: Chris Wilson +Date: Mon Jun 4 11:48:23 2012 +0100 + + ux/i965: create_sampler_state_bo() expects enums, so feed it the right types + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 072d7a8b42f04600c9d8054f3648642a1aaff57a +Author: Chris Wilson +Date: Mon Jun 4 11:40:01 2012 +0100 + + sna/debug: Assert the non-existence of the relocation handle at source + + This should help the static analyzer pinpoint the blame and make it + quieter. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 4a3c355e056339aed68b70470556633dea899b1b +Author: Chris Wilson +Date: Mon Jun 4 11:32:42 2012 +0100 + + sna: Silence a compiler warning for loss of 'const' qualifier + + Signed-off-by: Chris Wilson + +commit 791029cc16bca36b8dec82297ff7e07a972c51ab +Author: Chris Wilson +Date: Sat Jun 2 13:28:43 2012 +0100 + + sna/trapezoids: Implement trapezoidal opaque fills inplace + + Signed-off-by: Chris Wilson + +commit 1f78a934a423911e18d340f0585e31941f6e8663 +Author: Chris Wilson +Date: Sat Jun 2 13:27:52 2012 +0100 + + sna: Clear the counters prior to querying the property + + Signed-off-by: Chris Wilson + +commit a1953f1d4abc6e158a5e3ca53d3207548842254c +Author: Chris Wilson +Date: Sat Jun 2 12:02:55 2012 +0100 + + sna: Prefer to use memset() for extremely large clears + + Signed-off-by: Chris Wilson + +commit ce85cd1a36e31795a966ea8983c2d6f803a4eccd +Author: Chris Wilson +Date: Sat Jun 2 11:46:06 2012 +0100 + + sna: Add some DBG to retreiving EDID + + Signed-off-by: Chris Wilson + +commit e8eb273bd6153c232a9ffc558e3b7fd4beaab01b +Author: Chris Wilson +Date: Sat Jun 2 10:43:03 2012 +0100 + + sna/gen7: Add DBG for ring switching + + Signed-off-by: Chris Wilson + +commit 722afa6bc910a2ccfbb0442872a878d1b6b78315 +Author: Chris Wilson +Date: Sat Jun 2 10:04:02 2012 +0100 + + sna: Remove some unused members from the KMS state tracking + + Signed-off-by: Chris Wilson + +commit 26e7bb3f25f0c83d39ff505fa7e05bfcb976e39c +Author: Chris Wilson +Date: Sat Jun 2 09:16:51 2012 +0100 + + sna: Add a DBG message to indicate flushing for GPU idle + + Signed-off-by: Chris Wilson + +commit 58fc03b8c36688e9fa7925aa82b83d36c9decb7e +Author: Chris Wilson +Date: Sat Jun 2 08:53:24 2012 +0100 + + sna: Prevent NULL deref with early termination and DBG enabled + + Signed-off-by: Chris Wilson + +commit 1be2afb81df887ed664ac31d0641da808cfb8888 +Author: Chris Wilson +Date: Sat Jun 2 08:04:02 2012 +0100 + + legacy/i810/video: Release memory after creating adaptors + + Signed-off-by: Chris Wilson + +commit 261d086265fff6c9b28a67d2fcceed8f107d5cb0 +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + legacy/i810/dri: Propagate failure from allocating texture memory + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 2ea12b56d42686f75deb33fc126d09acee7e2899 +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + legacy/i810: Fix memset(sizeof(*ptr)) rather than memset(sizeof(ptr)) + + Clear the entire structure and not the first 4 bytes... + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit d3e15d1460faad192781d74fdc2b5092e9c148ad +Author: Chris Wilson +Date: Sat Jun 2 08:14:23 2012 +0100 + + uxa/i965: Make the unhandled allocation failures explicit + + Add assertions to the point of allocation and write failures. + + Signed-off-by: Chris Wilson + +commit 46fbb3d31bf73df4bd0259a146e9929f62a9c488 +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + uxa: NameForAtom may return NULL + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 8451d5dd3c992bcfad9f71aa890b6b225884b978 +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + uxa: Use unsigned bitfields for single bits + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit d66ca06865973833398560a04186e0067d9cb206 +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + uxa: Intialize is_glamor_pixmap + + It is not clear whether is_glamor_pixmap is always initialized prior to + use, so set it to a safe^W likely value. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 25a17b2ca5e3945150151c4308761891c0e20bab +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + uxa: Remove 'render_source_is_solid' dead code + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit ba0eb230836fa5f94a2f50da5880fdd3b9dfd72e +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + uxa: Fix reallocation of XVAdaptors array + + Prevent the leak and remove some unsightly code in the process. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit affb1f82c1401bac3f54654a342e3b16b8bd374b +Author: Chris Wilson +Date: Sat Jun 2 08:27:59 2012 +0100 + + sna/gradient: Reuse old gradient bo if allocation of new fails + + Prefer a stall to a crash. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit e51f984a4c15de42c5bee3aeacee553e2dd4eca0 +Author: Chris Wilson +Date: Sat Jun 2 08:23:35 2012 +0100 + + sna: Check gradient allocations during init + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 2c5647a18e7856b604bce70270463fc128c2cfcd +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + sna: NameForAtom may return NULL + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 7867bff00caeff9e1fbe569ca3d37b94f704a4cd +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + sna: Replace invalid signed value with unsigned ~0 for uint8_t + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit ca72b372237287af0f4475801a9b64efca975832 +Author: Chris Wilson +Date: Fri Jun 1 23:22:31 2012 +0100 + + sna: Drop return value from 3D point transform + + And just fixup the computed coordinates in the face of an invalid + matrix. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit b83e2a79f2a082630e0d3147abec8d3599f3f4b4 +Author: Chris Wilson +Date: Fri Jun 1 17:17:49 2012 +0100 + + uxa: Static analysis warning fixes + + A smattering of bugs and confusing code. + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 67e8ac365c4b7dd9c4eb2abe46aecc8cc04d4278 +Author: Chris Wilson +Date: Fri Jun 1 17:20:51 2012 +0100 + + sna/gen3+: Guard against a kgem_bo_destroy(NULL) + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit e91b27ae14a5366175a4fe9c87ee15a0a25b5a42 +Author: Chris Wilson +Date: Fri Jun 1 17:12:36 2012 +0100 + + sna: Fix potential deference of NULL cpu_bo inside assertion + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 048161e69612324d6c077ec487a2a64aaaa7c1f5 +Author: Chris Wilson +Date: Fri Jun 1 17:09:21 2012 +0100 + + sna/trapezoids: Check for malloc failure + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 2896aa7b46931d3b95567121ccb07844725ab45c +Author: Chris Wilson +Date: Fri Jun 1 17:08:01 2012 +0100 + + sna/io: Free the heap clip boxes on error paths + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 1ef00ff720226c211444806d9fdf67ce2046685b +Author: Chris Wilson +Date: Fri Jun 1 17:05:55 2012 +0100 + + sna/dri: Fix typo, check for NULL after allocations to spot failure! + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit dc0fe44bebfdee63bcda4d185b85fe9e1cb16a71 +Author: Chris Wilson +Date: Fri Jun 1 16:54:41 2012 +0100 + + sna: Fix a smattering of static analysis warnings + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 8eed569fb386a9af48a8beb28666d72c6678e48c +Author: Chris Wilson +Date: Fri Jun 1 13:02:50 2012 +0100 + + sna/trapezoids: Correct extents declaration for fallback + + Reported-by: Zdenek Kabelac + Signed-off-by: Chris Wilson + +commit 91419576eef562378cccf90968c4f0277139b03d +Author: Chris Wilson +Date: Fri Jun 1 12:09:19 2012 +0100 + + sna: Tiny DBG message tweak + + Signed-off-by: Chris Wilson + +commit 4bdecc5b07a184ba136129e75a7fef914ac3b8d2 +Author: Chris Wilson +Date: Fri Jun 1 11:06:04 2012 +0100 + + test: Add a very basic test to exercise BLT text drawing + + Signed-off-by: Chris Wilson + +commit ea0f326d80f21f89c3cff3595a6e1afc42b52efd +Author: Chris Wilson +Date: Fri Jun 1 09:04:23 2012 +0100 + + sna: Debug XDrawRectangle + + Signed-off-by: Chris Wilson + +commit 6a7efa991a705bdb5a3b9d5300d824a1ce8759af +Author: Chris Wilson +Date: Fri Jun 1 08:47:20 2012 +0100 + + test: Exercise basic rectangle drawing code + + Signed-off-by: Chris Wilson + +commit bc4323558bebd53e474fbc5404e1c41ab16d02e6 +Author: Chris Wilson +Date: Thu May 31 21:19:26 2012 +0100 + + sna: Handle negative values when computing the stipple modulus + + Signed-off-by: Chris Wilson + +commit aca994e03e6e0e16f55841418b0061b175e91e5d +Author: Chris Wilson +Date: Thu May 31 21:17:24 2012 +0100 + + sna: Fill early break for clip process of spans + + When on the same Y-band as the span, as soon as the clip boxes are too + far to the right, we can stop searching for more intersections. + + Signed-off-by: Chris Wilson + +commit 0fe150f898120ba9a00e1e6b9d66bec10d7e8a29 +Author: Chris Wilson +Date: Thu May 31 20:02:47 2012 +0100 + + sna: Fix computation of box for clipped stippled rectangles + + Signed-off-by: Chris Wilson + +commit a65c3b7b45df46ba993af6755b2460aa80fde930 +Author: Chris Wilson +Date: Thu May 31 19:15:05 2012 +0100 + + sna: Add some more DBG for stippled blts + + Signed-off-by: Chris Wilson + +commit b2cc64253217a90cf2ade9a8d6f1ed21b23fe875 +Author: Chris Wilson +Date: Thu May 31 19:45:56 2012 +0100 + + sna: And combine the two migrate to CPU clauses + + Just a small tidy up to remove a duplicated predicate. + + Signed-off-by: Chris Wilson + +commit bd1dd4cf663ca230724dc6beb329b7eb270ea9d5 +Author: Chris Wilson +Date: Thu May 31 17:57:56 2012 +0100 + + sna: If the CPU damage already contains the migration region, we are done + + Signed-off-by: Chris Wilson + +commit a2d92ade3911e62f950c85b5650fb13da1279ced +Author: Chris Wilson +Date: Thu May 31 17:49:01 2012 +0100 + + sna: Prevent readback of 1x1 if it lies inside CPU damage + + If the pixel exists only in the CPU damage, attempting to read it back + from the GPU only results in garbage. + + Signed-off-by: Chris Wilson + +commit a34a06c4ba36b21e386b1f6371a4bd3f03ff35a1 +Author: Chris Wilson +Date: Thu May 31 20:14:38 2012 +0100 + + sna/glyphs: Clip the damage to the drawable for unclipped glyphs-to-dst + + Signed-off-by: Chris Wilson + +commit dcc7ba8ccf95db1c265bd5492f041f94ce368b7a +Author: Chris Wilson +Date: Thu May 31 17:48:40 2012 +0100 + + sna/composite: Add debugging modes to disable acceleration + + Signed-off-by: Chris Wilson + +commit 984400b95a879c7c020de14545ac2e1d9e759e05 +Author: Chris Wilson +Date: Thu May 31 16:56:21 2012 +0100 + + sna/glyphs: Don't apply drawable offsets twice + + The offsets from image_from_pict() already include the drawable offset + so we need not apply them twice. + + Signed-off-by: Chris Wilson + +commit 7bbd445c8cbeb7bcea2c56c4deb9bf6ccf6f2497 +Author: Chris Wilson +Date: Thu May 31 16:45:03 2012 +0100 + + sna/trapezoids: Apply the drawable offset for the CPU migration + + Signed-off-by: Chris Wilson + +commit c5313620a2f66bc8daf211fc77a9c480a79ea271 +Author: Chris Wilson +Date: Thu May 31 15:06:16 2012 +0100 + + sna: Suppress flushes once we have cleared the kernel dirtiness + + Signed-off-by: Chris Wilson + +commit 0347c8abec9740d706d87dd2f719ac68f3d1c32e +Author: Chris Wilson +Date: Thu May 31 13:50:31 2012 +0100 + + sna/glyphs: Fix upconverting of glyphs via gpu + + When using the mask instead of the src for adding the glyphs we need to + pass the glyph coordinates through the mask coordinates rather than the + source. + + Signed-off-by: Chris Wilson + +commit 90ae4f853222ee33206134f4efdc4accfb2f2c38 +Author: Chris Wilson +Date: Thu May 31 14:17:40 2012 +0100 + + sna: Avoid mixing signed/unsigned int/int16 arithmetric + + Life becomes unpleasant with sign extension. + + Signed-off-by: Chris Wilson + +commit 660c89e9742bac5ce7cbd480e08b4667e37dee8c +Author: Chris Wilson +Date: Thu May 31 13:18:21 2012 +0100 + + sna: Use full 16-bit unsigned values for absolute differences + + Beware the overflow implicit in: + adx = x2 >= x1 ? x2 - x1 : x1 - x2; + when both x2 and x1 may be large signed 16-bit values + + Reported-by: Zdenek Kabelac + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50532 + Signed-off-by: Chris Wilson + +commit 035c2953751f58225bd6b1fcb4c1275ccb5526cb +Author: Chris Wilson +Date: Thu May 31 09:29:40 2012 +0100 + + sna/glyphs: use add(WHITE, glyph, mask) for channel expansion + + If the glyph format does not match the mask format we can not simply add + the two together, but must first perform a channel expansion (or + contraction) by multiplying the glyph against a WHITE source. + + Normally the glyph and the mask are equivalent formats and so we hit the + fast path. + + Signed-off-by: Chris Wilson + +commit cf5b3e2ebf4ee0330f5421b9377bb512a94ec284 +Author: Chris Wilson +Date: Wed May 30 14:44:59 2012 +0100 + + sna: Don't attempt to flush scanout if unattached + + This was lost in the midst of the OSTimer overhaul. + + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=50393 + Signed-off-by: Chris Wilson + +commit 3a64ba0895035f6567e9a15357396b06c0f2d6dd +Author: Chris Wilson +Date: Wed May 30 13:51:07 2012 +0100 + + sna: Convert remaining drmCommands to drmIoctl + + This helps to silence valgrind + + Signed-off-by: Chris Wilson + +commit 47e2db0ba8ae3fbcdf58cba26c58ec0932b4c90b +Author: Chris Wilson +Date: Wed May 30 10:37:22 2012 +0100 + + sna: Replace FREELIKE_BLOCK with MAKE_MEM_NOACCESS + + And similarly for MALLOCLIKE_BLOCK. The issue being that valgrind may + overwrite such blocks with alloc-fill and free-fill values, but when in + fact they are defined and still in use by the GPU. This can lead to the + GPU processing garbage, and GPU hangs. + + Reported-by: Zdenek Kabelac + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50393 + Signed-off-by: Chris Wilson + +commit 08a630dc5ef87e551865e558fe4fc45ea66457b4 +Author: Chris Wilson +Date: Wed May 30 08:50:44 2012 +0100 + + sna: Ensure we flush scanout even when otherwise idle. + + Reported-by: Zdenek Kabelac + References: https://bugs.freedesktop.org/show_bug.cgi?id=50477 + Signed-off-by: Chris Wilson + +commit 10ca765ad346931087be146f3e6d1f4069c95f26 +Author: Chris Wilson +Date: Wed May 30 08:32:34 2012 +0100 + + Mark a few more options as being UXA specific + + Signed-off-by: Chris Wilson + +commit 740368c4c6eb547adad247ff529d16e594d6459b +Author: Nick Bowler +Date: Mon May 28 18:28:28 2012 -0400 + + Include config.h in intel_options.c + + Commit 8a9a585341e2 ("Only create a single instance of the intel_options + array") moved the definition of intel_options into a separate .c file. + Several of the defined options are #ifdef'd based on the configuration, + but since config.h is never included, the macros being tested are never + defined. Therefore, none of the configuration-specific options will + ever be available at runtime, even if they should be. + + Add an inclusion of config.h so that such configuration-specific options + work again. + + Signed-off-by: Nick Bowler + Signed-off-by: Chris Wilson + +commit e1b720c40cf511b4ed6d387891d715522d0d54b6 +Author: Chris Wilson +Date: Wed May 30 07:47:53 2012 +0100 + + sna/sprite: Restore another xf86drm.h + + Signed-off-by: Chris Wilson + +commit e986b06162abf286b3f8f97b791fd66dcf8f9aec +Author: Chris Wilson +Date: Tue May 29 22:21:05 2012 +0100 + + sna/overlay: Handle return from GETPARAM query correctly + + drmIoctl() returns 0 on success, not a positive value. + + Signed-off-by: Chris Wilson + +commit 68874e2d694cc68f5f051ba5fe4a79a71fdb2dbc +Author: Chris Wilson +Date: Tue May 29 21:28:39 2012 +0100 + + sna: Fix chunking for large stipples + + Reported-and-tested-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49510 + Signed-off-by: Chris Wilson + +commit 12af82581118470f59817f626d61df655950e243 +Author: Chris Wilson +Date: Tue May 29 21:45:32 2012 +0100 + + sna/overlay: Replace drmCommand with direct invocations of drmIoctl + + Signed-off-by: Chris Wilson + +commit 3a1b6e57fbbbb4c8e5ac9588537840f4ec176ae6 +Author: Chris Wilson +Date: Tue May 29 21:37:16 2012 +0100 + + sna/overlay: Restore one xf86drm.h include + + This was removed in haste, when it is required for drmIoctl and friends. + + Signed-off-by: Chris Wilson + +commit 264d1b1e1fb368f7845a8112bfa2ad2224acabd9 +Author: Chris Wilson +Date: Tue May 29 13:03:56 2012 +0100 + + sna: Also check for a free exec slot for the upload buffers + + As we check before allocating the upload buffer, we can not be certain + that we will allocate an already attached bo or that we have a free exec + slot. So always check that we have an extra exec slot available - the + false positive rate is going to be negligible. + + Reported-by: Zdenek Kabelac + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50457 + Signed-off-by: Chris Wilson + +commit c7bcca9a3fb6c669d8b093e6399914693770b0b3 +Author: Chris Wilson +Date: Tue May 29 12:49:12 2012 +0100 + + sna: Make finding DPMS property valgrind clean + + Signed-off-by: Chris Wilson + +commit 3c074797094dc7675bb6ae549630fdf061ab5258 +Author: Chris Wilson +Date: Tue May 29 12:45:20 2012 +0100 + + sna: Make GetEDID valgrind clean. + + Signed-off-by: Chris Wilson + +commit 560e50c0a5afa0824086557581ca6aa5696b44a2 +Author: Chris Wilson +Date: Tue May 29 12:36:31 2012 +0100 + + sna: Make GetEncoder() valgrind clean + + Signed-off-by: Chris Wilson + +commit b4b6fa795201379694a03d537064dbca446cfdfd +Author: Chris Wilson +Date: Tue May 29 11:32:28 2012 +0100 + + sna: Trim the set of includes + + Signed-off-by: Chris Wilson + +commit 9d1a9e666763a3e1270c8f000b1b37a6b926441f +Author: Chris Wilson +Date: Mon May 28 20:06:35 2012 +0100 + + sna: Bump experimental ioctl number for vmap + + Gazumped! + + Signed-off-by: Chris Wilson + +commit 55e6f5f220401318529e81f7c96fe0af3b893a0c +Author: Chris Wilson +Date: Mon May 28 16:21:09 2012 +0100 + + sna: Use the local function for turning the cursor off prior to release + + Signed-off-by: Chris Wilson + +commit 77dd429222922aa1ba7f283553e11e60e4d5c496 +Author: Chris Wilson +Date: Mon May 28 14:40:23 2012 +0100 + + sna/dri: Make WAIT_VBLANK valgrind clean + + Signed-off-by: Chris Wilson + +commit 8ebe84818ab70e662a9bb3f232b4664ff40ac375 +Author: Chris Wilson +Date: Mon May 28 14:27:46 2012 +0100 + + sna: Make sna_copy_fbcon() valgrind clean + + Signed-off-by: Chris Wilson + +commit f37dae734ebac5c0ed2d6f50fc92bc107f4e4a33 +Author: Chris Wilson +Date: Mon May 28 14:20:54 2012 +0100 + + sna: Just use the CRTC id from the array + + Signed-off-by: Chris Wilson + +commit b1f24a0eae4bb0081ff7469a2aee63a1f32140f7 +Author: Chris Wilson +Date: Mon May 28 14:16:03 2012 +0100 + + sna: Make sna_crtc_apply() valgrind clean + + Signed-off-by: Chris Wilson + +commit 0ebfcdbb80245f98c0c7ef9f090a2be6900fb457 +Author: Chris Wilson +Date: Mon May 28 14:10:04 2012 +0100 + + sna: Make AddFB valgrind clean + + Signed-off-by: Chris Wilson + +commit 32ca3c7b65516b0bd48b0d0979b086ee1580167a +Author: Chris Wilson +Date: Mon May 28 14:02:11 2012 +0100 + + sna: Make sna_crtc_is_bound() valgrind clean + + Signed-off-by: Chris Wilson + +commit 7973f6751c9bf565dee4c89aa3e1badbcc45018f +Author: Chris Wilson +Date: Mon May 28 14:00:55 2012 +0100 + + sna: Add a little bit more verbosity to cursor routines for valgrind + + Signed-off-by: Chris Wilson + +commit 19c463e52df919fc75de7e420fd3565f0e9a0576 +Author: Chris Wilson +Date: Mon May 28 12:54:35 2012 +0100 + + sna: Only wait if there is a suitable active buffer + + There is not point repeating the search after retiring if we know that + there is no outstanding suitable active buffer. + + Signed-off-by: Chris Wilson + +commit 5b99c7cd340f782d3057d4257865c5feb96b71f0 +Author: Chris Wilson +Date: Mon May 28 10:55:49 2012 +0100 + + uxa/dri: Enable vblank scheduling even with pageflipping disabled + + Signed-off-by: Chris Wilson + +commit 810357ad65d551ec5d35dbf228f1b62fe235801f +Author: Chris Wilson +Date: Mon May 28 10:12:38 2012 +0100 + + uxa/dri: Fix ordering of setting vs using swap members + + Trivial readibility fix, as the actual ordering is serialised through + there being only a single thread. + + Signed-off-by: Chris Wilson + +commit 2b56a188ef2c48f82572eca2201a3a0ecf6b4f45 +Author: Chris Wilson +Date: Mon May 28 10:01:09 2012 +0100 + + Mark another couple of options as being UXA only. + + Signed-off-by: Chris Wilson + +commit b025f1a604dbbbd456a23f330ceed5f97ecdffcf +Author: Chris Wilson +Date: Mon May 28 09:48:49 2012 +0100 + + sna/dri: Tweak vblank_mode=n swapbuffers to account for throttle delay + + Signed-off-by: Chris Wilson + +commit 45148a714f1461fff898aeb393ad225f081b9bd5 +Author: Chris Wilson +Date: Mon May 28 09:39:51 2012 +0100 + + sna/dri: Enable handling for Option "SwapBuffersWait" + + Signed-off-by: Chris Wilson + +commit c709f2447dfc6dc36c50ff741d5d9bbdc7c03b58 +Author: Chris Wilson +Date: Mon May 28 08:17:21 2012 +0100 + + sna/dri: Requeue vblank throttling until the vsync'ed copy completes + + If the GPU is busy, then we may not actually schedule our copy for + several vblanks, resulting in us falsely reporting that the work + completed too early and allowing the client to continue scheduling more + work and racing ahead of the queued copies. + + Signed-off-by: Chris Wilson + +commit 7e73fa02ed361a9c0c08f61d00421671bf10ce9f +Author: Chris Wilson +Date: Mon May 28 08:16:43 2012 +0100 + + sna: Add some debugging to show count of outstanding requests during retire + + Signed-off-by: Chris Wilson + +commit 62b557065edc0555f2bf83b0eed9169329a2f2ba +Author: Chris Wilson +Date: Sun May 27 16:52:51 2012 +0100 + + sna: Use magic upload buffers for video textures + + So that we may benefit from the caching of buffers and the automatic + selection of the preferred upload method. + + Signed-off-by: Chris Wilson + +commit 35291d2db813f75fedcdca9920a40592acd3cca3 +Author: Chris Wilson +Date: Sun May 27 16:54:29 2012 +0100 + + sna: Search the inactive bo cache for a mappable upload buffer + + See if we have a bo that we can cheaply map to an inplace upload, rather + than rely on an existing GTT map. + + Signed-off-by: Chris Wilson + +commit 36d53ff52b055b2b5fc03aff7b2cab83037d9f42 +Author: Chris Wilson +Date: Sun May 27 16:46:42 2012 +0100 + + sna: Validate all CRTCs after updating one + + Updating one CRTC may cause the kernel to turn off another, so be + paranoid and run the check in a loop after applying the CRTC set. + + Signed-off-by: Chris Wilson + +commit 7fdd8bd6d2ba7bf113d4109e6bb6f750f909565f +Author: Johannes Obermayr +Date: Sat May 26 23:52:28 2012 +0200 + + glamor: Fix misspelled xf86GetOptValString and OPTION_ACCEL_METHOD introduced by commit e456291. + + Signed-off-by: Chris Wilson + +commit 8ea4ba081de0206351394481f54dcbe6922a085b +Author: Chris Wilson +Date: Sat May 26 21:48:16 2012 +0100 + + sna: Fix typo for debug compilation + + s/ctrc/crtc/ + + Signed-off-by: Chris Wilson + +commit 317bf05196086eb5dedb6436c07f253f01c9bf63 +Author: Chris Wilson +Date: Fri May 25 14:34:16 2012 +0100 + + sna: Perform the selftest after probing + + We do no want to slow down the detection phase by performing our + self-tests, so only running those before initialising the driver. + + Signed-off-by: Chris Wilson + +commit a5fe863e3f1a6750edaffb518c4e768e9bc11521 +Author: Chris Wilson +Date: Fri May 25 14:28:56 2012 +0100 + + sna: Check the bus type before declaring probe success + + This should never fail, but still better to fail during detection rather + than pretend it works. + + Signed-off-by: Chris Wilson + +commit 4094826aee76ef24dad13bc5a8a723bfe4a69162 +Author: Chris Wilson +Date: Fri May 25 08:55:13 2012 +0100 + + sna: Trust the crtc-is-bound determination after modeset and hotplug + + As these should be the only time that they change and we now have the + checks in place, we can drop the workaround of doing the check just + before emitting the wait. + + Signed-off-by: Chris Wilson + +commit 8a9a585341e2dd43c649204fcf6d92a867671ba3 +Author: Chris Wilson +Date: Fri May 25 08:50:33 2012 +0100 + + Only create a single instance of the intel_options array + + Signed-off-by: Chris Wilson + +commit e45629135065d0cc73c285f8df35ab4e1d07c6dc +Author: Chris Wilson +Date: Thu May 24 18:22:45 2012 +0100 + + Allow runtime switching of AccelMethod between uxa/sna and even glamor + + Section "Device" + Option "AccelMethod" "uxa/glamor/sna" + EndSection + + The appropriate backend must also be enabled at compile time for the + runtime option to be available (i.e. --enable-uxa (default) --enable-sna + --enable-glamor) + + Demanded-by: Adam Jackson + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50290 + Signed-off-by: Chris Wilson + +commit df6ab02c3690eea8393ecc8c113e2f2891856cc6 +Author: Eugeni Dodonov +Date: Mon Oct 31 14:43:22 2011 -0200 + + Unify options handling between UXA and SNA + + Unifies available options for both UXA and SNA drivers, and + moves them into a common header file, intel_opts.h. + + Signed-off-by: Eugeni Dodonov + +commit ae2be7e25bda46551381c19a673b321b4382e1f9 +Author: Chris Wilson +Date: Thu May 24 16:33:27 2012 +0100 + + sna/trapezoids: Correct rounding for downsampling onto sample grid + + Reported-by: S. Christian Collins + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49446 + Signed-off-by: Chris Wilson + +commit 0ab226e27e7920bdb9f7eb62c5174cd097ac7f7f +Author: Chris Wilson +Date: Thu May 24 12:51:46 2012 +0100 + + sna: Query CRTC states following a hotplug event + + Signed-off-by: Chris Wilson + +commit 3f3bde4f0c72f6f31aae322bcdc20b95eade6631 +Author: Chris Wilson +Date: Thu May 24 11:58:46 2012 +0100 + + uxa: Only consider an output valid if the kernel reports it attached + + Reported-by: Kyle Hill + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50078 + Signed-off-by: Chris Wilson + +commit 11db66fedf96f158cbbac8011a8ba0b29a20ba3a +Author: Chris Wilson +Date: Thu May 24 11:07:19 2012 +0100 + + sna: Add some more DBG tracepoints around modesetting + + Signed-off-by: Chris Wilson + +commit fb9da4cb9e12ca733c31879b8b37906f361a8c35 +Author: Chris Wilson +Date: Wed May 23 13:53:37 2012 +0100 + + sna: Only mark an unattached output as inactive + + So that a latter attempt to set the DesiredMode may succeed and we do + not modify the configuration without notifying clients. + + Signed-off-by: Chris Wilson + +commit 5ae032e22b127c7c95753197e0914a8028a3b22e +Author: Chris Wilson +Date: Wed May 23 13:27:07 2012 +0100 + + sna: Suppress modesetting errors on return from VT switch + + If we presume that userspace will set the correct mode shortly + afterwards, we can ignore the failure of the automatic restore. + + Signed-off-by: Chris Wilson + +commit 34882a979d9817d33bd6a8ae73a9f7083556578c +Author: Chris Wilson +Date: Wed May 23 10:27:44 2012 +0100 + + sna: Keep checking retirement for flushing list + + Even after all outstanding requests have been completed we may still + have buffers on the flushing list that need to become idle. + Once such consequence would be to prevent the vblank flush from going + idle, causing spurious wakeups every vrefresh when otherwise idle. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=50078 + Signed-off-by: Chris Wilson + +commit 54fde5bf05d43f26e7f1893584af736a138d245f +Author: Dave Airlie +Date: Wed May 16 15:34:08 2012 +0100 + + intel: convert sna/uxa to using new glyph picture accessors. + + The compat-api.h takes care of old/new servers. + + Signed-off-by: Dave Airlie + +commit 43a34186d13d29c671431832469ca5301751b3cf +Author: Dave Airlie +Date: Wed May 16 15:26:55 2012 +0100 + + intel: convert to new screen conversion APIs + + The compat header takes care of the old server vs new server. + + this commit was autogenerated from util/modular/x-driver-screen-scrn-conv.sh + + Signed-off-by: Dave Airlie + +commit 9aabc04d76fa976abb4a74f4e9676c7556e88df3 +Author: Dave Airlie +Date: Wed May 16 15:14:32 2012 +0100 + + intel: add compat header file for conversion fns + + Signed-off-by: Dave Airlie + +commit c9ce6ae8a6fc7b1a91aef1e59640c39024d0426d +Author: Dave Airlie +Date: Wed May 23 08:33:20 2012 +0100 + + legacy/i810: rename pScreen->screen + + For consistency before moving to new APIs. + + This just changes the files where the API changes will touch. + + Signed-off-by: Dave Airlie + +commit 70ee0f84f5b9c6c13a0338f8b2757e587c849c14 +Author: Dave Airlie +Date: Wed May 23 08:31:52 2012 +0100 + + legacy/i810: rename pScrn->scrn + + This is need to make the compat api stuff easier to implement. + + Signed-off-by: Dave Airlie + +commit 3410db008c6c20dc6590a89c05b40a0c6de6744a +Author: Chris Wilson +Date: Tue May 22 15:54:52 2012 +0100 + + sna/dri: Avoid confusion of attempting to exchange pixmaps for DPMS-off flips + + Not only do we confuse ourselves, but we end up confusing the damage + tracking on the root window whenever we update the Screen Pixmap. So for + the time being, don't. + + Signed-off-by: Chris Wilson + +commit 28c4fb0b70e098972af972d30a660d167a8973ad +Author: Chris Wilson +Date: Tue May 22 09:49:53 2012 +0100 + + sna: Swallow disconnection event upon mode restoration + + So that we can VT switch back to X even though the output configuration + has now changed. + + Signed-off-by: Chris Wilson + +commit b17c44c8d234cb2c651e88c7892bcd5b33139c1c +Author: Chris Wilson +Date: Tue May 22 09:43:51 2012 +0100 + + sna: Remove incorrect assertion for mode restoration + + Signed-off-by: Chris Wilson + +commit 49b7742999ee11b0c36754ea10bc5609ebe8c609 +Author: Chris Wilson +Date: Tue May 22 09:40:25 2012 +0100 + + sna: Force config restoration after VT switch + + Signed-off-by: Chris Wilson + +commit 952e3dcba3a651d22d44dbb039ad97e111d9bc63 +Author: Chris Wilson +Date: Mon May 21 19:48:52 2012 +0100 + + sna: Only override active on DPMSModeOff + + Along the enable path we then only want to change the value if we + actually call sna_crtc_apply. + + Signed-off-by: Chris Wilson + +commit afdaf184594bfe3633305969eb1166c28e1006bf +Author: Chris Wilson +Date: Mon May 21 14:32:39 2012 +0100 + + sna: Add a log message for the change of CRTC mode + + Signed-off-by: Chris Wilson + +commit 9fb18462ec1428a486f998585e7b4caf4dd08f53 +Author: Chris Wilson +Date: Mon May 21 14:12:23 2012 +0100 + + sna: Confirm that the modeset takes + + If we attempt to change to a mode with a disabled connector the kernel + will silently switch off that connector (and crtc) and report that the + modeswitch is successful. + + Reported-by: Kyle Hill + References: https://bugs.freedesktop.org/show_bug.cgi?id=50078 + Signed-off-by: Chris Wilson + +commit cd3b48854403ee63723ef570c1a7f9f8447e7105 +Author: Chris Wilson +Date: Sat May 19 12:56:45 2012 +0100 + + sna/gen7: Trim a dead assignment + + Signed-off-by: Chris Wilson + +commit cf79cd3e27b7077f67f202b16ed39eb1cc70ac65 +Author: Chris Wilson +Date: Sat May 19 12:44:11 2012 +0100 + + sna: Emit a new batch if we need to clip after PolyText without space + + Signed-off-by: Chris Wilson + +commit f91dcc44dcc15850f82666b1bcdd27182400e7dc +Author: Chris Wilson +Date: Fri May 18 20:09:41 2012 +0100 + + sna: Give the proxy a unique name + + So that if we cache the current destination bo (for example, gen3) then + a new proxy (or even just a new batchbuffer) will indeed cause the + destination buffer to be updated. + + Reported-and-tested-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48636 + Signed-off-by: Chris Wilson + +commit ee073d613bba38f90951405d5ecddfcf3ac5e043 +Author: Chris Wilson +Date: Fri May 18 15:19:00 2012 +0100 + + sna/traps: Fix processing of full-steps + + A missing factor of Y-height caused the computation of coverage for the + spans to be completely wrong. This affects the vertical segments of + rounded rectangles, for instance. + + Signed-off-by: Chris Wilson + +commit 8ba800c63906fb29d34f40b9437092a665bffb14 +Author: Chris Wilson +Date: Thu May 17 22:46:18 2012 +0100 + + sna: Don't consider uploading inplace if the dst bo is unmappable + + Handle (and take advantage of) the fallback at the high level rather + than masquerading an inplace write. + + Signed-off-by: Chris Wilson + +commit dad24721a13ce3a357e8ddae3c2dea61045f6fc2 +Author: Chris Wilson +Date: Thu May 17 21:44:22 2012 +0100 + + Revert "sna: Always try to operate inplace if we an LLC gpu bo" + + This reverts commit 10b4a9bb5f46ab9d9c8b165084ce4174b54a8d39 as it + causes a regression for pixel data uploads to active buffers. + +commit 681c6e72412fff96b203a09be6ac8d393f3489a5 +Author: Chris Wilson +Date: Thu May 17 19:43:02 2012 +0100 + + sna: Track flushing status of live bo + + Currently we only move a bo with an outstanding kernel flush onto the + flushing list if it is no longer in use. This leaves us potentially + stalling on a flush if we try then to write to the object believing it + to be retired and idle. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit d99502a33d5bdbad010b7a036c1aee989fe29947 +Author: Chris Wilson +Date: Thu May 17 17:56:43 2012 +0100 + + sna/glyphs: Pass the extents to the backend for preparing to composite glyphs + + This information should not be required, but it might come in handy, so + pass it along. + + Signed-off-by: Chris Wilson + +commit fb21c2df1a10d66f115a5978b0db508058fdc412 +Author: Chris Wilson +Date: Thu May 17 16:30:31 2012 +0100 + + sna/io: Assert that we do not replace a bo->flush object + + These should be pinned by the higher layers and so we should never be + attempting to replace them. If we do replace a bo->flush, then we will + end up miscounting outstanding flush bo. + + Signed-off-by: Chris Wilson + +commit 596c0a68709a93bb376647c1b566e9df4f23b35d +Author: Chris Wilson +Date: Tue May 15 18:53:39 2012 +0100 + + sna: Assign GCops after checking for fallback to pass sanity checks + + We assert that prior to installing the fallback GCops the current ops + are the default set. This is broken if we point GCops to our GPU ops, + but then fallback. So check for the fallback first. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 3c9759ef2ad755bbe720d4aa031ec67dbc3b7734 +Author: Chris Wilson +Date: Mon May 14 14:12:06 2012 +0100 + + sna/gen3: Fix pre-multiplication of opacity masks + + The return type for the multipliation was only 8-bits wide dating back + to the time when the function just computed a single channel and didn't + try to blend the output back into the argb pixel value. Inlining the + shift into the function means that we need the output to be 32-bits wide + instead. + + Reported-by: Jiri Slaby + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49887 + Signed-off-by: Chris Wilson + +commit 053bd5bf2425aed44e1c2bb981d98ee5171211a0 +Author: Chris Wilson +Date: Mon May 14 12:08:09 2012 +0100 + + sna: Use the correct storage for box_from_seg + + Fixes regression from 3aa98289e3a2 with clipped segments. As we clipped + the empty box rather than the segment, we never drew any outlines. + + Signed-off-by: Chris Wilson + +commit b654b8794db7b00666ce5c59535a9302932c483b +Author: Chris Wilson +Date: Mon May 14 11:36:15 2012 +0100 + + sna/trapezoids: Fix picture creation for fallback trapezoids + + Being a little lax in not updating the format after upconversion to + PICT_a8, meant we were trying to composite with a depth 1, 8 bpp a8 + image and thoroughly confusing everybody when creating the upload + trapezoid mask. + + Signed-off-by: Chris Wilson + +commit 80567f61afe77a003e663b17c1fc6b6c3ed04042 +Author: Chris Wilson +Date: Mon May 14 10:40:38 2012 +0100 + + sna/trapezoids: Do not reduce SRC to a clear pixmap to unbounded + + As we instruct the migration code to drop the clear when copying from + the GPU to the CPU, we then need to emit the zeros during the span + writing. + + Fixes some occassional corruption behind complex clip masks. + + Signed-off-by: Chris Wilson + +commit 067e9375809ea6cfa0c0b5e2159b359535c3b362 +Author: Chris Wilson +Date: Mon May 14 10:00:00 2012 +0100 + + sna: Trim unused partial buffer uploads + + Signed-off-by: Chris Wilson + +commit effb0b9ec579624e38f0007cd7096e7da04048ca +Author: Chris Wilson +Date: Sun May 13 19:29:44 2012 +0100 + + sna: Tweak usage of kgem_bo_can_map vs kgem_bo_mapped + + More often than not we only want to consider whether we can map the bo + and decide whether doing so is the better option. Whether the bo is + already mapped is not such an issue any more with the throttling. + + Signed-off-by: Chris Wilson + +commit 37aa1e1291127ff4d27407fac936af64d0e353a8 +Author: Chris Wilson +Date: Sun May 13 16:59:30 2012 +0100 + + sna: Simplify partial buffer tracking + + As we only want to track partial buffers with asynchronous reuse, + exclude all overs from the active buffers list. Secondly, keep the list + in most-recently-used order rather than by size. + + Signed-off-by: Chris Wilson + +commit 7048a71fb6ff5e7c37e21a794f7b42d9a1da3473 +Author: Chris Wilson +Date: Sun May 13 15:42:28 2012 +0100 + + sna: Flush batch if GPU is idle upon wakeup + + Signed-off-by: Chris Wilson + +commit 12e340c4b8efa70f3305f489af30461b7c0e5edd +Author: Chris Wilson +Date: Sun May 13 11:01:35 2012 +0100 + + sna: Optimise kgem_clear_dirty() by keeping dirty buffers at the front + + Signed-off-by: Chris Wilson + +commit b0dfd8223adee87e28b391a019effa7bb3630533 +Author: Chris Wilson +Date: Sun May 13 08:33:23 2012 +0100 + + sna: Flush the batch before blocking if the GPU is idle + + If we have work pending for the GPU and we believe it is idle, just + submit the batch in order to improve GPU/CPU concurrency and reduce + latency. + + Signed-off-by: Chris Wilson + +commit 6924fc525d6bc82901cfed769c176b44c0bce024 +Author: Chris Wilson +Date: Fri May 11 14:04:09 2012 +0100 + + sna: Fix off-by-one in computation of width for inplace trapezoids + + This lead to the dropping of the last pixel for small area trapezoids, + such as the right hand outline of buttons under ClearLooks. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48320 + Signed-off-by: Chris Wilson + +commit a58a543e84ed15c41f4fa7644be3ba7865d31b92 +Author: Chris Wilson +Date: Thu May 10 12:59:55 2012 +0100 + + sna: handle vmap creation failures gracefully + + Signed-off-by: Chris Wilson + +commit 9af651fdf93f6ccdbcb147cb16989f84c2d0ebdc +Author: Chris Wilson +Date: Thu May 10 10:57:56 2012 +0100 + + sna: Include some DBG for segment drawing + + Signed-off-by: Chris Wilson + +commit 3aa98289e3a2f59633ac5f1a5f64db4ee55609d9 +Author: Chris Wilson +Date: Thu May 10 10:31:03 2012 +0100 + + sna: Correct adjustment of LineCap for rectilinear segments + + Signed-off-by: Chris Wilson + +commit ad69316ab1054c5e4b56c19b8eec87b9f86939e5 +Author: Chris Wilson +Date: Thu May 10 10:03:49 2012 +0100 + + sna: Include a small amount of timer-slack to avoid very short sleeps + + Signed-off-by: Chris Wilson + +commit 29d1d409b259ba0c85947ef5eef903ea527aa118 +Author: Chris Wilson +Date: Thu May 10 09:54:53 2012 +0100 + + sna: Avoid doubling the final step of poly lines + + Signed-off-by: Chris Wilson + +commit a83d90ee61be44a2a36b56ad24bbc6544320448f +Author: Chris Wilson +Date: Wed May 9 20:34:52 2012 +0100 + + sna: Avoid randomly changing domains of active bo + + After attaching the bo to the scanout, mark it as retired in order to + update its domains so that the assertion during retirement later is + correct. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49526 + Signed-off-by: Chris Wilson + +commit d5200510b8f2a0ccb2e0c45dfebc659f8360780c +Author: Chris Wilson +Date: Wed May 9 17:58:58 2012 +0100 + + sna: Respect the error terms when reversing the PolyLine DDA + + Signed-off-by: Chris Wilson + +commit a3d37fb29f8dffb0e370ad95783994aaa7eccfaf +Author: Chris Wilson +Date: Tue May 8 15:47:14 2012 +0100 + + sna: Force remapping for IO transfer + + Should fix regression from fcccc5528 (sna: Improve handling of inplace + IO for large transfers) whereby it was aborting the transfer it we need + to remap the buffer for the upload. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49546 + Signed-off-by: Chris Wilson + +commit 2a9a93e4484e0c616724610f4c8019fcbaa7ad53 +Author: Chris Wilson +Date: Tue May 8 15:12:51 2012 +0100 + + sna: Only avoid ring switching for indirect uploads + + Signed-off-by: Chris Wilson + +commit 613902b60e0f2ca2a916e68306a1a37bc236d00d +Author: Chris Wilson +Date: Tue May 8 14:17:46 2012 +0100 + + sna: Fix off-by-one in checking available execbuffer slots + + Signed-off-by: Chris Wilson + +commit 663e387b35c314c4c2bee8137d6b70d27fa9f729 +Author: Chris Wilson +Date: Tue May 8 11:45:34 2012 +0100 + + sna: Only submit a batch to the scanout if it is not already busy + + Signed-off-by: Chris Wilson + +commit cd7a56b7313233190a4c4a735d4a141e99c9b688 +Author: Chris Wilson +Date: Tue May 8 08:53:41 2012 +0100 + + sna: Throttle independently of scanout updates + + As we are now throttling to relieve GTT pressure, it is a benefit to + consistently throttle before blocking. + + Signed-off-by: Chris Wilson + +commit 2372176f73b7c945f56b7673eab5eccb86366416 +Author: Chris Wilson +Date: Mon May 7 12:57:35 2012 +0100 + + sna: Throttle execution when searching for inactive buffers + + If we have some active buffers that we may reuse and old outstanding + requests, throttling before retiring should prevent the CPU from running + away from the GPU and hogging the entire GTT and RAM. + + Signed-off-by: Chris Wilson + +commit 4df228749729dd540b639368400fa20118cdf412 +Author: Chris Wilson +Date: Mon May 7 10:42:30 2012 +0100 + + sna: Rate-limit and shrink bo usage if we hit system resource limits + + Signed-off-by: Chris Wilson + +commit ca4d2296e6e42e837627756790b262cae0fd3b6c +Author: Chris Wilson +Date: Mon May 7 10:23:19 2012 +0100 + + sna: Expand batch buffers + + As batch buffers are compacted to fit into the smallest bo, the only + cost is the larger static array allocation (and presumably cache + misses). + + Signed-off-by: Chris Wilson + +commit 9281b80644ce76ad9e0f3f8f812cbae97c10814a +Author: Chris Wilson +Date: Mon May 7 23:25:22 2012 +0100 + + sna/gen[345]: Clear used vertices when discarding unmappable vbo + + Signed-off-by: Chris Wilson + +commit a6ee376e93517659391905e6c9018b3bb735135d +Author: Chris Wilson +Date: Mon May 7 10:24:21 2012 +0100 + + sna: Use the correct invocation of kgem_bo_destroy() for sanity-checks + + Signed-off-by: Chris Wilson + +commit c89c7e9a04314e40cee5514a182a8364c4f99374 +Author: Chris Wilson +Date: Mon May 7 11:54:50 2012 +0100 + + sna: Update select timeout when installing a timer in the block handler + + The block handler is run after the timers are queried for their + expiration and so if we install a timer in the block hander, we must + set the timeout ourselves. + + Signed-off-by: Chris Wilson + +commit 4ba366ead3a133136554579fe9a604da1fc1da68 +Author: Chris Wilson +Date: Mon May 7 08:55:35 2012 +0100 + + sna: Manually execute the timer as TimerForce does not run an inactive timer + + Signed-off-by: Chris Wilson + +commit 2c801c45dbad58d18f2673e17723825dda0c4e55 +Author: Chris Wilson +Date: Sun May 6 17:23:11 2012 +0100 + + sna: Replace timerfd with OsTimer + + As timerfd is linux-specific, and OsTimer an OS-agnostic abraction, + replace the former with the later. Arguably this has slightly better + performance characteristics in select-bound loops. + + Signed-off-by: Chris Wilson + +commit 74d2707de4a0f94d2143f1e9c60762e4167b1ea6 +Author: Chris Wilson +Date: Sun May 6 21:51:27 2012 +0100 + + sna: Remove short-circuiting for large font fallbacks + + Unlike the fallback for an unhandled depth, we need to ensure that the + pixmaps are mapped to the CPU before calling the fb routines. + + Reported-by: Toralf Förster + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49558 + Signed-off-by: Chris Wilson + +commit c5b6741d3729c6867702ab64a6c59cb8052c0ef3 +Author: Chris Wilson +Date: Sun May 6 12:40:54 2012 +0100 + + sna/gen2+: Fix typo for computing redirected extents for render copy + + Signed-off-by: Chris Wilson + +commit 771090f25db702d25ebbd3f2b44429cf0acfe8fd +Author: Chris Wilson +Date: Fri May 4 20:56:37 2012 +0100 + + sna: Add a pair of asserts to track down a NULL pointer dereference + + Looks like the assumption for the location of the data is invalid, + allocation failure, perhaps? + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit d376a960df7a081a5d449f77b81ae13223b98929 +Author: Chris Wilson +Date: Fri May 4 10:09:46 2012 +0100 + + sna/dri: Only track a single pending flip across all pipes + + Signed-off-by: Chris Wilson + +commit 450592f989efd0d3bc9ef2de245fce0a180e91a2 +Author: Chris Wilson +Date: Fri May 4 09:50:19 2012 +0100 + + sna: Cache the framebuffer id + + Also fixup a weakness of only tracking scanout with a single bit, as we + used to clear it forcibly after every flip. + + Signed-off-by: Chris Wilson + +commit 29d035279b2fe98d5ba9cf01125faea34d36fb76 +Author: Chris Wilson +Date: Fri May 4 09:11:31 2012 +0100 + + sna/dri: pageflip unref debugging + + Signed-off-by: Chris Wilson + +commit 079b491ced2c9c3c73d938ef6025d040016ad3a7 +Author: Chris Wilson +Date: Thu May 3 23:52:17 2012 +0100 + + sna: Ensure drawables are clipped against the pixmap before migration + + Signed-off-by: Chris Wilson + +commit 1a5f8599b150064339d62a97c58026e62b49ff27 +Author: Chris Wilson +Date: Thu May 3 23:21:48 2012 +0100 + + sna: Compile fix for fresh assertion + + Signed-off-by: Chris Wilson + +commit 61cac5c265279d45677262216a0ba56f548cd898 +Author: Chris Wilson +Date: Thu May 3 22:33:59 2012 +0100 + + sna: Maintain a reference to the chain of proxies + + Rather than attempt to flatten the chain to the last link, we may need + to hold a reference to the intermediate links in case of batch buffer + submission. + + Fixes http://tnsp.org/~ccr/intel-gfx/test.html + + Reported-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49436 + Signed-off-by: Chris Wilson + +commit dea5d429f7a52dfc945b17a57ef79744cc796b0e +Author: Chris Wilson +Date: Thu May 3 17:35:24 2012 +0100 + + sna: Remove extraneous SCANOUT flags + + These are now fixed by obeying a minimum alignment restriction. + + Signed-off-by: Chris Wilson + +commit 19fd24a4db994bb5c5ce4a73f06d9394a758ea91 +Author: Chris Wilson +Date: Thu May 3 17:35:10 2012 +0100 + + sna: Fix offset for combining damage + + Signed-off-by: Chris Wilson + +commit 1376c81dbf3b789e04e6804df1b1fd32bcb2bd1d +Author: Chris Wilson +Date: Thu May 3 17:34:28 2012 +0100 + + sna: Debug option to force particular upload/download paths + + Signed-off-by: Chris Wilson + +commit f0d464d6b18855616fc43d9a25aa6853f86c8e2b +Author: Chris Wilson +Date: Thu May 3 16:17:35 2012 +0100 + + sna/dri: Balance flush counting + + Signed-off-by: Chris Wilson + +commit d47e98dd64c0b9fe2979db42622c5ee8168e8b35 +Author: Chris Wilson +Date: Thu May 3 14:54:17 2012 +0100 + + sna: Minor glyph fallback fixes + + Signed-off-by: Chris Wilson + +commit a1f08b8850616952fb0babe2275eb36b13a380ec +Author: Chris Wilson +Date: Thu May 3 14:53:29 2012 +0100 + + sna: Don't discard GPU buffer if we only want to read back for the operation + + Signed-off-by: Chris Wilson + +commit fcccc5528b8696fb4f9b3f9f528673b95d98a907 +Author: Chris Wilson +Date: Thu May 3 11:27:44 2012 +0100 + + sna: Improve handling of inplace IO for large transfers + + If the transfer is large enough to obliterate the caches, then it is + preferrable to do it inplace rather than upload a proxy texture and + queue a blit. This helps prevent an inconsistency where one layer + believes the operation should be done inplace only for the IO layer to + perform an indirect upload. + + Testing show no significant impact upon the cairo-traces, but it does + prevent x11perf -shmput from exploding. + + Signed-off-by: Chris Wilson + +commit 53568e8e49559094ce5b24b8709669f1f76fe2bf +Author: Chris Wilson +Date: Mon Apr 30 09:24:06 2012 +0100 + + sna/gen7: Fix debug printing of primitives + + Signed-off-by: Chris Wilson + +commit 01c26a44fdce761781908be11102e7a6a3db523c +Author: Chris Wilson +Date: Wed May 2 21:09:27 2012 +0100 + + sna: Avoid reducing damage for synchronisation + + Signed-off-by: Chris Wilson + +commit f4c34e9ab32f31669896b8f626195827a85af337 +Author: Chris Wilson +Date: Wed May 2 19:09:10 2012 +0100 + + sna: Bring back the minimum alignment for G33 + + The underlying cause is still not fixed. It should be possible to use + the much laxer alignment for single-stream linear. Still no idea how I + fail to convince the GPU to drop the depth buffer. + + Reported-by: Matti Hamalainen + References: https://bugs.freedesktop.org/show_bug.cgi?id=49391 + Signed-off-by: Chris Wilson + +commit 10b4a9bb5f46ab9d9c8b165084ce4174b54a8d39 +Author: Chris Wilson +Date: Wed May 2 12:45:09 2012 +0100 + + sna: Always try to operate inplace if we an LLC gpu bo + +commit dd80fb00bf7acf37dc3b9125431a12b67d7e92d3 +Author: Chris Wilson +Date: Wed May 2 11:31:42 2012 +0100 + + sna: Fallback for glyphs too large for XY_TEXT_IMMEDIATE + + Signed-off-by: Chris Wilson + +commit 7e09babb3e9e23882db30ee7d0c22c503962faa9 +Author: Chris Wilson +Date: Tue May 1 12:37:45 2012 +0100 + + sna: Only attempt to reuse exported scanout buffers + + Yet more mesa w/a. + + Signed-off-by: Chris Wilson + +commit b4b32e7a0172a74372f800e9c74d639a23c5ff34 +Author: Chris Wilson +Date: Tue May 1 11:15:00 2012 +0100 + + sna: Fast-path unclipped glyphs + + Avoid the redundant computation of the glyph intersection with the + drawable bounding box. + + Signed-off-by: Chris Wilson + +commit ffdf9aca12adcfa1ec7ab7a1706873105a5f0d4a +Author: Chris Wilson +Date: Sun Apr 29 21:59:52 2012 +0100 + + legacy/i810: hwmc additionally depends upon building DRI + + Signed-off-by: Chris Wilson + +commit 444da84c47266bcbbdf5121507901de8eb36f11b +Author: Chris Wilson +Date: Sun Apr 29 21:49:04 2012 +0100 + + configure: Version bump for 2.19.0 release + +commit a206a1eee1fb799d567d68db564d663cfc66f6cc +Author: Chris Wilson +Date: Sat Apr 28 01:54:43 2012 +0100 + + sna: Tune relocation array size + + Signed-off-by: Chris Wilson + +commit 4f1908c651ef9e2af33d8831466a605234978c46 +Author: Chris Wilson +Date: Fri Apr 27 23:19:56 2012 +0100 + + sna: PolyPoint only uses the gc->fgPixel + + Signed-off-by: Chris Wilson + +commit 8453034c7dd893f1d4c32ee87724f3a13137595d +Author: Chris Wilson +Date: Fri Apr 27 22:08:51 2012 +0100 + + sna/gen6: Allow ring switching at the start of a batch + + Signed-off-by: Chris Wilson + +commit 93ad7793894787600c5074917c753fa7c6816134 +Author: Chris Wilson +Date: Fri Apr 27 22:03:55 2012 +0100 + + sna: Tweak semaphores-enabled heuristic + + The kernel module now defaults to -1, confusing the test. + + Signed-off-by: Chris Wilson + +commit 986dbdda3bf8dcf208e55543d8a3393c4b53f10b +Author: Chris Wilson +Date: Fri Apr 27 19:21:44 2012 +0100 + + sna: Tweak placement choice for high-overhead operations + + Some operations cost more to setup than to transfer data back and forth! + + Signed-off-by: Chris Wilson + +commit daac9a1d036d80ccce83438b49115a236a16bfb6 +Author: Chris Wilson +Date: Fri Apr 27 16:50:28 2012 +0100 + + sna: Micro-optimise common case of checking a single fenced bo + + Signed-off-by: Chris Wilson + +commit 5967d76ca09a257ec9db66ea664158e1dfd083ba +Author: Chris Wilson +Date: Wed Apr 25 17:15:37 2012 +0100 + + sna: Fixup broken assertion + + It is valid for the cpu_bo to be NULL, as we may be choosing to free the + large shadow pixel buffer instead. + + Signed-off-by: Chris Wilson + +commit 860d3859b586939cd52e45b944cb6abd2a2ca71b +Author: Chris Wilson +Date: Wed Apr 25 16:04:33 2012 +0100 + + sna/gen7: Add CS stall before changing WM binding table + + Signed-off-by: Chris Wilson + +commit c219283460c0f2dfdb823e0cb139d05075c6afce +Author: Chris Wilson +Date: Wed Apr 25 15:04:01 2012 +0100 + + sna/gen7: Apply more recent improvements from SNB perf tuning + + Signed-off-by: Chris Wilson + +commit a3371613c9bf577a69cdf811ca1bebaea46bbe95 +Author: Chris Wilson +Date: Wed Apr 25 11:09:35 2012 +0100 + + sna: Do not automagically convert GTT mappings on untiled scanout to CPU + + The likelihood of an untiled mapping of the scanout is slim, except for + gen3 with large desktops, and there it should never be in the CPU + domain... + + The issue is that we may perform an operation "inplace", yet incoherent + with the display engine, and never flush the CPU cache, resulting in + render corruption. In theory at least! + + Signed-off-by: Chris Wilson + +commit 1abd92cd012ee46d44ed4873a5e750d56ae6668f +Author: Chris Wilson +Date: Wed Apr 25 11:16:30 2012 +0100 + + sna: Clear the domain tracking after attaching the bo to scanout + + This is basically to make sure we don't continue treating it as CPU + coherent. + + Signed-off-by: Chris Wilson + +commit 8c58c840b1ba579a5601804fc710c58e1e00213f +Author: Chris Wilson +Date: Mon Apr 23 11:09:37 2012 +0100 + + sna/dri: Always clear the scanout when destroying dri2 buffers + + As we may end up holding onto and releasing the Screen pixmap last, we + may also be responsible for flushing the last reference to the scanout. + + Signed-off-by: Chris Wilson + +commit caf9144271a10f90ea580c246b2df3f69a10b7a0 +Author: Chris Wilson +Date: Fri Apr 20 17:15:37 2012 +0100 + + sna: Remove the assertions that the cached upload buffers are active + + These were added to track down some corruption, but the assertions + themselves are incorrect, just very rare. The upload buffer may + genuinely be cached if we abort the render operation after uploading the + source data, leaving the proxy not coupled to any request. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48400 + Signed-off-by: Chris Wilson + +commit aff3614efd5c12e658fa5723934e5bd50a83a316 +Author: Chris Wilson +Date: Fri Apr 20 13:21:40 2012 +0100 + + sna: Always clear the mmapped domains when reusing partial upload buffers + + As we need to make sure that we do invalidate the caches appropriately + on reuse. Mildly paranoid, but strictly required by the spec. + + Signed-off-by: Chris Wilson + +commit cb6a3dc2edf3cd612f833bc9a4656166735ee856 +Author: Chris Wilson +Date: Thu Apr 19 10:34:23 2012 +0100 + + sna: Discard proxy upload buffer if we choose to render to it + + Even if we try to avoid treating an upload buffer as a real GPU target, + we may still choose to migrate the buffer to the GPU in order to keep + other buffers on the GPU. In that case, we do want to create a real GPU + bo. + + Signed-off-by: Chris Wilson + +commit 4cf74d409ca63c6a479c1ee2187908c04f3b830b +Author: Chris Wilson +Date: Thu Apr 19 09:09:32 2012 +0100 + + sna: Don't consider upload proxies as being on the GPU for render targets + + The upload proxy is a fake buffer that we do not want to render to as + then the damage tracking become extremely confused and the buffer it + self is not optimised for persistent rendering. We assert that we do not + use it as a render target, and this patch adds the check so that we + avoid treating the proxy as a valid target when choosing the render + path. + + Signed-off-by: Chris Wilson + +commit fd81408b978c9b57c046ee43d2d32e1370e83a7d +Author: Chris Wilson +Date: Wed Apr 18 11:39:43 2012 +0100 + + sna: Increase the render target alignment to 4 pixels on gen4+ as well + + Repoerted-and-tested-by: Toralf Förster + +commit 11599e52b842b5db76798879b0fbb57762fe6002 +Author: Chris Wilson +Date: Tue Apr 17 20:08:14 2012 +0100 + + sna/dri: Decouple the frame event info after attaching along error paths + + Signed-off-by: Chris Wilson + +commit b817200371bfe16f44b879a793cf4a75ad17bc5c +Author: Chris Wilson +Date: Tue Apr 17 17:54:58 2012 +0100 + + Don't issue a scanline wait while VT switched + + Be paranoid and check that we own the VT before emitting a scanline + wait. If we attempt to wait on a fb/pipe that we do not own, we may + issue an illegal command and cause a lockup. + + Signed-off-by: Chris Wilson + +commit af4a6e8cb52ace594934446e6d8a7aaa1945a9b0 +Author: Chris Wilson +Date: Mon Apr 16 20:57:03 2012 +0100 + + sna: Don't assert exported buffers are not busy + + As we do not fully control these buffers, we cannot truly say when they + are idle, we can only trust that the split between us and the compositor + doesn't lead to much corruption. + + Signed-off-by: Chris Wilson + +commit a16616209bb2dcb7aaa859b38e154f0a10faa82b +Author: Chris Wilson +Date: Sat Apr 14 19:03:25 2012 +0100 + + uxa: Fix leak of glyph mask for unhandled glyph composition + + ==1401== 7,344 bytes in 34 blocks are possibly lost in loss record 570 of 587 + ==1401== at 0x4027034: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) + ==1401== by 0x8BE5150: drm_intel_gem_bo_alloc_internal (intel_bufmgr_gem.c:689) + ==1401== by 0x899FC04: intel_uxa_create_pixmap (intel_uxa.c:1077) + ==1401== by 0x89C2C41: uxa_glyphs (uxa-glyphs.c:254) + ==1401== by 0x21F05E: damageGlyphs (damage.c:647) + ==1401== by 0x218E06: ProcRenderCompositeGlyphs (render.c:1434) + ==1401== by 0x15AA40: Dispatch (dispatch.c:439) + ==1401== by 0x1499E9: main (main.c:287) + + Signed-off-by: Chris Wilson + +commit ae145c21e9fd3a12164f8b4720d059f9c158249e +Author: Chris Wilson +Date: Sat Apr 14 18:42:23 2012 +0100 + + sna: Avoid leaking the plane resources when determining sprite planes + + Fixes the tiny, one-off leak: + + ==1407== 8 bytes in 1 blocks are definitely lost in loss record 48 of 527 + ==1407== at 0x402894D: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) + ==1407== by 0x8580BE8: drmMalloc (xf86drm.c:147) + ==1407== by 0x8583D54: drmAllocCpy (xf86drmMode.c:73) + ==1407== by 0x8585265: drmModeGetPlaneResources (xf86drmMode.c:955) + ==1407== by 0x8A1BCE9: sna_video_sprite_setup (sna_video_sprite.c:367) + ==1407== by 0x8A1A0A3: sna_video_init (sna_video.c:523) + ==1407== by 0x89FD4E0: sna_screen_init (sna_driver.c:935) + ==1407== by 0x15AD80: AddScreen (dispatch.c:3909) + ==1407== by 0x19A2DB: InitOutput (xf86Init.c:817) + ==1407== by 0x14981C: main (main.c:204) + + Signed-off-by: Chris Wilson + +commit 69a7737abeded6ee923643bd8a80a5a84e6a979c +Author: Chris Wilson +Date: Sat Apr 14 12:06:51 2012 +0100 + + sna: Align texture subsurfaces to 2x2 texture samples + + Signed-off-by: Chris Wilson + +commit 1d2a46e0902d82b43a5e12af36521a6a7fd6ba39 +Author: Chris Wilson +Date: Sat Apr 14 12:04:23 2012 +0100 + + sna: Align redirect subsurfaces to 2x2 or 4x4 render spans + + Signed-off-by: Chris Wilson + +commit 1ce2b65d622797000e0a4db7dc851d5b1da04f85 +Author: Chris Wilson +Date: Sat Apr 14 11:59:31 2012 +0100 + + sna: Align render target sizes on gen2/3 to 4x4 render spans + + Signed-off-by: Chris Wilson + +commit 89f2b09b1e5be9842747998ea4fe32a6f1ede4cc +Author: Chris Wilson +Date: Fri Apr 13 16:37:43 2012 +0100 + + sna: Avoid using TILING_Y for large objects on gen2/3 + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48636 + Signed-off-by: Chris Wilson + +commit eaadbce122059066353743f1653aa16e9d9b747f +Author: Chris Wilson +Date: Fri Apr 13 15:12:36 2012 +0100 + + sna: Relax bogus assertion + + The bo may be considered unmappable due to being bound to outside the + mappable region, which we are attempting to rectify through mapping into + the GTT domain. + + Signed-off-by: Chris Wilson + +commit b478420740d05fa87ddbd92042b1f7f2d002f73e +Author: Chris Wilson +Date: Fri Apr 13 15:07:13 2012 +0100 + + sna: Limit the buffer reuse for mappable uploads to only those with mmaps + + Signed-off-by: Chris Wilson + +commit 90e2740e7e459c56205fa65bab1ae3dbfd5d3945 +Author: Chris Wilson +Date: Fri Apr 13 13:51:57 2012 +0100 + + sna: Remove the conflicting assertion during GTT map + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=48636 + Signed-off-by: Chris Wilson + +commit 9e6d55a8d63f10ca6a2b10e44d00c84b07724485 +Author: Chris Wilson +Date: Fri Apr 13 09:56:39 2012 +0100 + + sna: Don't use miSpan code for wide-spans by default, too expensive + + Only use the fall-forward miSpans code when it prevents a readback. + + Signed-off-by: Chris Wilson + +commit 9becfbbf89f2b170e50f705cabfc7bbf1dcf9846 +Author: Chris Wilson +Date: Fri Apr 13 09:38:57 2012 +0100 + + sna: Draw dashed PolyLines twice, once for the fgPixel, once for the bgPixel + + As the fast paths only setup state upfront, we were missing the state + changes required between dash-on/off. Take advantage of that each pixel + is only drawn once to batch the state changes and run the + miZeroDashLines twice. + + A future task would be to use a custom line drawing routine... + + Fixes regression from ec1267df746512c2e262ef0bd9e9527bc5efe6f4. + + Signed-off-by: Chris Wilson + +commit e269ed5d4e1b9d758aeb9a85ed0fa631f0aff0b1 +Author: Chris Wilson +Date: Thu Apr 12 22:46:22 2012 +0100 + + sna: Restore CPU domain for vmapped buffers when reusing + + For a vmapped upload buffer, we need to notify the kernel (and thereby + the GPU) to invalidate the sampler and flush its caches when we reuse an + idle buffer. + + Signed-off-by: Chris Wilson + +commit d29b8650c40c673e6ddddaf52db9247e9836cba8 +Author: Chris Wilson +Date: Thu Apr 12 22:23:12 2012 +0100 + + sna: Revert use of mmap64() + + As this just causes mayhem on a 64-bit platform. Doomed if you, doomed + if you don't. :( + + Signed-off-by: Chris Wilson + +commit a78b1d71a39ae29d5f85bd82c09202ebec3e6539 +Author: Chris Wilson +Date: Thu Apr 12 15:37:25 2012 +0100 + + sna: Declare AC_SYS_LARGEFILE for mmap64 + + In order to use the full 32-bits of mmap address space on small + platforms we need to use mmap64(). + + Signed-off-by: Chris Wilson + +commit 09deba927daa96be6230b1c3e1b425622512d8a2 +Author: Chris Wilson +Date: Tue Apr 10 20:59:36 2012 +0100 + + sna: Check ioctl return from set-domain + + Let's not assume it succeeds and so avoid altering our bookkeeping along + failure paths. + + Signed-off-by: Chris Wilson + +commit 0b12f1d8e4d0a4fafac9553f144535efc4ebe0be +Author: Chris Wilson +Date: Tue Apr 10 15:23:54 2012 +0100 + + sna: Fix shadowed variable + + sna_accel.c: In function 'sna_pixmap_move_area_to_gpu': + sna_accel.c:1751:12: warning: declaration of 'flags' shadows a parameter + [-Wshadow] + sna_accel.c:1731:72: warning: shadowed declaration is here [-Wshadow] + + Signed-off-by: Chris Wilson + +commit 755a7107aed268d87c5cc0feb1ba388b0cb7fc59 +Author: Chris Wilson +Date: Tue Apr 10 15:19:19 2012 +0100 + + sna: Fix typo and use the right pointer for kgem_bo_destroy + + Useless warnings in xorg headers ftl. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48400 + Signed-off-by: Chris Wilson + +commit c8502e350cb18f6f5d821d237ffcee453f347eba +Author: Chris Wilson +Date: Tue Apr 10 14:43:28 2012 +0100 + + sna: Add missing alloc failure check for creating tile source + + Signed-off-by: Chris Wilson + +commit 9cc6f7ccc55cc11f47b3b7d626c9f5a7c1327d57 +Author: Chris Wilson +Date: Tue Apr 10 12:06:56 2012 +0100 + + sna: Release the freed bo cache upon expire + + Signed-off-by: Chris Wilson + +commit 102d11906a672140bac099e7bd1b35345d13a2fc +Author: Chris Wilson +Date: Mon Apr 9 22:54:51 2012 +0100 + + sna: Check for an inactive partial buffer to reuse after retiring requests + + Signed-off-by: Chris Wilson + +commit e2fb2421d8f5c07925d1699673aa4b1dd6c6b22c +Author: Chris Wilson +Date: Mon Apr 9 22:54:15 2012 +0100 + + sna: Release partial buffers during cache expiration + + Signed-off-by: Chris Wilson + +commit 333fdcad8677675a4758223c1a980c90d970ee42 +Author: Chris Wilson +Date: Mon Apr 9 22:53:31 2012 +0100 + + sna: Repeat expire whilst there remaining outstanding requests + + Do not allow the cache expiration to finish if we are still running + requests. + + Signed-off-by: Chris Wilson + +commit 778232e3d2fb5340a3092014801dc00a56c56d42 +Author: Chris Wilson +Date: Tue Apr 10 11:14:50 2012 +0100 + + sna: Only move the bo into the read domain for readback + + And mark it as currently in no domain afterwards, so that if we reuse + it, it will be appropriately moved later. + + Signed-off-by: Chris Wilson + +commit dd093eafb9b94b8e4cd8853d74078c3aa7e72f57 +Author: Chris Wilson +Date: Mon Apr 9 14:09:42 2012 +0100 + + sna: Add assertions around proxy list handling + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48400 + Signed-off-by: Chris Wilson + +commit 7f0bede3e7e3f92a637d1c886304b16afc0e34f2 +Author: Chris Wilson +Date: Mon Apr 9 10:48:08 2012 +0100 + + sna/traps: Use a temporary variable for the write pointer + + To avoid accumulating the write offset for wide spans, we need to reset + the destination pointer between spans. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48332 + Signed-off-by: Chris Wilson + +commit 2e4da00e3e03b873f5cad0cc5b1f6cc791852ca5 +Author: Chris Wilson +Date: Mon Apr 9 10:42:18 2012 +0100 + + sna/traps: Assert that the inplace row is contained before writing + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48332 + Signed-off-by: Chris Wilson + +commit 0464e93a088a9e8bc29ad8b36b6e12c3dda32ec6 +Author: Chris Wilson +Date: Sun Apr 8 17:16:03 2012 +0100 + + sna: Add some assertions for misuse of proxies + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48400 + Signed-off-by: Chris Wilson + +commit 479cb6ba71038fe44f66fb31fad90d0d454fea7a +Author: Chris Wilson +Date: Sun Apr 8 14:25:49 2012 +0100 + + sna: Compress adjoining spans during FillSpans + + Signed-off-by: Chris Wilson + +commit c5c01c13badeb7c2ead0c848b746d8d474277a77 +Author: Chris Wilson +Date: Sun Apr 8 13:51:13 2012 +0100 + + sna: Remove the duplicated check for use-bo? in PolySegments + + Signed-off-by: Chris Wilson + +commit f5deea4f60433ee2b0c2d02fba682fff8b7829e8 +Author: Chris Wilson +Date: Sun Apr 8 13:39:47 2012 +0100 + + sna: Correct partial-write flag for PolySegments fallback + + Signed-off-by: Chris Wilson + +commit c3d7f4c1cf7d052163b7c4e74bb202c618f0eb76 +Author: Chris Wilson +Date: Sun Apr 8 13:18:56 2012 +0100 + + sna/gen3: Reset accumulated constants for each composite + + In particular the glyph routines require the composite setup to + reinitialise state between glyph runs. This affects anything trying to + use glyphs without a mask with a gradient source, for example. + + Signed-off-by: Chris Wilson + +commit 701473d20485a0557b4fb36efcbfbb8656e2f619 +Author: Chris Wilson +Date: Sun Apr 8 10:09:42 2012 +0100 + + sna: Release cached upload buffers when reusing a write buffer for readback + + References: https://bugs.freedesktop.org/show_bug.cgi?id=48400 + Signed-off-by: Chris Wilson + +commit 1ecf17b2507f95e1fefea15833fa9f57ec256a2e +Author: Chris Wilson +Date: Sat Apr 7 10:01:01 2012 +0100 + + sna/gradient: Compute the absolute delta between color stops + + Otherwise we do not detect gradients that start from white! + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48407 + Signed-off-by: Chris Wilson + +commit 4356fae72db3a33935b575edf95c84fbb48072a7 +Author: Chris Wilson +Date: Fri Apr 6 21:10:50 2012 +0100 + + sna/video: Only wait upon the scanout pixmap + + Caught by the addition of the assertion. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit b790ba2ec9ead51227d85fc8630bc7505eb7d7b3 +Author: Chris Wilson +Date: Fri Apr 6 15:38:02 2012 +0100 + + sna: Correct the damage offset for redirected rendering + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48385 + Signed-off-by: Chris Wilson + +commit 0b81bafb802bb86454739ed46cf45571bccef735 +Author: Chris Wilson +Date: Fri Apr 6 15:14:45 2012 +0100 + + sna/glyphs: Prefer a temporary upload mask for large glyph masks + + If the required temporary mask is larger than the 3D pipeline can + handle, just render to a CPU buffer rather than redirect every glyph + composition. + + Signed-off-by: Chris Wilson + +commit 42a84613e34522af885b4b50d6c68ef77e81ffc3 +Author: Chris Wilson +Date: Fri Apr 6 14:27:15 2012 +0100 + + sna: Relase the upload cache when overwriting with PutImage + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48359 + Signed-off-by: Chris Wilson + +commit 999aa210ff87919945c673bdd34bae76ac097681 +Author: Chris Wilson +Date: Fri Apr 6 09:24:36 2012 +0100 + + sna: Use a sentinel value to prevent accessing beyond the end of the y_buckets + + Signed-off-by: Chris Wilson + +commit 1ae6328c57eb496072f0d0e27440f5d0901633b0 +Author: Chris Wilson +Date: Fri Apr 6 09:12:08 2012 +0100 + + sna: Remove redundant check from tor_inplace() + + We only execute full-steps for vertical edges so we do not need the + second check. + + Signed-off-by: Chris Wilson + +commit 51b9202d27db3d98c6d82ba224bd8eb218533dd9 +Author: Chris Wilson +Date: Wed Apr 4 11:13:27 2012 +0100 + + sna: Only engage the GPU detiler for multiple rows + + Signed-off-by: Chris Wilson + +commit 98ad4c3cd8647ba3ec90fb45157773c8e85e886c +Author: Chris Wilson +Date: Tue Apr 3 19:47:15 2012 +0100 + + sna/gen3: Don't force use of the render pipeline just for vmap + + Signed-off-by: Chris Wilson + +commit 0915d414f55a1bff4171981feb87bae212f29f23 +Author: Chris Wilson +Date: Tue Apr 3 19:04:29 2012 +0100 + + sna/gen3: Fix pre-multiplication of mask value + + Signed-off-by: Chris Wilson + +commit 04851e4210d2d71542359c14d4b68d0851b36326 +Author: Chris Wilson +Date: Tue Apr 3 12:34:24 2012 +0100 + + sna/gen3: Convert the clear-color from picture->format to a8r8g8b8 + + The shaders treat colours as an argb value, however the clear color is + stored in the pixmap's native format (a8, r5g6b5, x8r8g8b8 etc). So + before using the value of the clear color as a solid we need to convert + it into the a8r8g8b8 format. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48204 + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47308 + Signed-off-by: Chris Wilson + +commit 87a672dafd9d6f47f31b77b406b7f0fb2b4030ac +Author: Chris Wilson +Date: Tue Apr 3 09:24:06 2012 +0100 + + sna: Apply CoordMode when computing point extents + + Reported-by: Patrick Truebe + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48220 + Signed-off-by: Chris Wilson + +commit 0a0ee491ea18dc59748ff4419ae73bd1a369ae79 +Author: Chris Wilson +Date: Tue Apr 3 09:23:49 2012 +0100 + + sna: Debugging flil spans and their clipping + + Signed-off-by: Chris Wilson + +commit ec1267df746512c2e262ef0bd9e9527bc5efe6f4 +Author: Chris Wilson +Date: Mon Apr 2 16:16:24 2012 +0100 + + sna: Use the solid spans fast paths for dashed zero-width lines as well + + Signed-off-by: Chris Wilson + +commit 2d1f3cb198f2fe9602356a334a076abf3c68a9c7 +Author: Chris Wilson +Date: Mon Apr 2 13:51:37 2012 +0100 + + sna/gen4: Remove the accidental debugging hack from the last commit + + Signed-off-by: Chris Wilson + +commit 5c4dc9c5db7b2a5b936bdbc15536c5cf0f7f5f23 +Author: Chris Wilson +Date: Mon Apr 2 13:40:22 2012 +0100 + + sna/gen3+: Fix sampling of borders around gradients + + Incurs a slight loss of precision for the internal gradient, but much + more preferable to the artefacts around the borders with RepeatNone. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45016 + Signed-off-by: Chris Wilson + +commit 0b2651dc04cef8f9692b2557684f044b4980700f +Author: Chris Wilson +Date: Sun Apr 1 19:43:15 2012 +0100 + + sna: Apply composite offset to damage for spans fast paths + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 4ea9ab9303d21a62683055b75eaed66c97a5f289 +Author: Chris Wilson +Date: Sun Apr 1 16:36:16 2012 +0100 + + sna: Fix assertion to look at bbox of all boxes/points + + Signed-off-by: Chris Wilson + +commit 932743bb333e35d5f6529a701137aad4d7490555 +Author: Chris Wilson +Date: Sun Apr 1 09:54:43 2012 +0100 + + sna: Assert that drawing boxes are within bounds + + More sanity checks required. + + Signed-off-by: Chris Wilson + +commit cc20c45aa0ca15720510668d6918bf3c99104626 +Author: Chris Wilson +Date: Fri Mar 30 22:51:21 2012 +0100 + + sna: Minimise the risk of hotplug hangs by checking fb before vsync + + Everytime we issue a MI_WAIT_FOR_EVENT on a scan-line from userspace we + run the risk of that pipe being disable before we submit a batch. As the + pipe is then disabled or configured differently, we encounter an + indefinite wait and trigger a GPU hang. + + To minimise the risk of a hotplug event being detected and submitting a + vsynced batch prior to noticing the removal of the pipe, perform an + explicit query of the current CRTC and delete the wait if we spot that + our framebuffer is no longer attached. This is about as good as we can + achieve without extra help from the kernel. + + Reported-by: Francis Leblanc + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45413 (and others) + Signed-off-by: Chris Wilson + +commit 305734ebdf3d51c084cfbee8804b6c60b1f03a98 +Author: Chris Wilson +Date: Fri Mar 30 21:27:29 2012 +0100 + + sna: Separate out scanline waiting for gen4 + + So that we do not set a gen4 bit on gen2 and apply the old workaround of + trimming y2 instead. + + Signed-off-by: Chris Wilson + +commit 6f2814db6f7b89e94e54b8d73c7e176ab7d1c469 +Author: Chris Wilson +Date: Fri Mar 30 20:45:55 2012 +0100 + + sna/traps: Align the pointer+index + + It's the location of the pixels within the row that matter for + alignment! + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47418 + Signed-off-by: Chris Wilson + Tested-by: Magnus Kessler + +commit ee075ced844350785685a0f93f88f1dc310bcc73 +Author: Chris Wilson +Date: Fri Mar 30 19:09:30 2012 +0100 + + sna/traps: Align the pointer not the indices + + Magnus found that inplace_row was still crashing on his setup when it + tried to perform an 8-byte aligned write to an unaligned pointer. This + time it looks like the row pointer itself was not 8-byte aligned, so + instead of assuming that and fixing up the indices, ensure that the + (index+row) results in an 8-byte aligned value. + + Reported-by: Magnus Kessler + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47418 + Signed-off-by: Chris Wilson + +commit fde8a010b3d9406c2f65ee99978360a6ca54e006 +Author: Chris Wilson +Date: Fri Mar 30 12:47:21 2012 +0100 + + uxa: Remove broken render glyphs-to-dst + + Reported-by: Vincent Untz + Reported-by: Robert Bradford + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48045 + Signed-off-by: Chris Wilson + +commit 451489b49916cf5a9d27844196f9656e590d9124 +Author: Chris Wilson +Date: Fri Mar 30 10:21:26 2012 +0100 + + sna/gen7: Allow per-device specific maxima + + As the maximum thread count and urb size differs between different + incarnations of the GT units, be a little more flexible in programming + those maximums. + + Signed-off-by: Chris Wilson + +commit ea36f2c4a3fa9afa8184eeaf944af9924c080368 +Author: Eugeni Dodonov +Date: Thu Mar 29 21:08:29 2012 -0300 + + Add support for Ivy Bridge GT2 Server chipset + + Sometimes known as Bromlow. + + Signed-off-by: Eugeni Dodonov + Signed-off-by: Chris Wilson + +commit 6142232fa0feeb39412cda85ca727cc770eaa042 +Author: Chris Wilson +Date: Wed Mar 28 18:59:26 2012 +0100 + + sna: Add video sprite support for ILK+ + + Based on the work by Jesse Barnes. + + Signed-off-by: Chris Wilson + +commit ae8aa172a7330439a8e6dda41f5e33eb257a139b +Author: Chris Wilson +Date: Wed Mar 28 22:07:10 2012 +0100 + + sna: Fix up 32-bit overflow for maximum object size calculation + + Signed-off-by: Chris Wilson + +commit 2e7b5f7eafbf452c781e50eba7dc8323260af59e +Author: Chris Wilson +Date: Tue Mar 27 10:42:59 2012 +0100 + + sna/traps: Prefer to try mono spans on the GPU before trying inplace CPU + + Signed-off-by: Chris Wilson + +commit 522b41b393b979fdccf1ad62194cde8129f98c8c +Author: Chris Wilson +Date: Tue Mar 27 10:42:21 2012 +0100 + + sna/traps: Fix the width of the left-hand edge of an unaligned box + + Signed-off-by: Chris Wilson + +commit 008ad39b72eb86dc2f89789427be269c148feaf4 +Author: Chris Wilson +Date: Tue Mar 27 10:41:37 2012 +0100 + + sna/gen6: Reduce opaque solid OVER to SRC for render composite + + Signed-off-by: Chris Wilson + +commit a9e9041934b2486e5661ba6c550e6670009f69f3 +Author: Chris Wilson +Date: Mon Mar 26 16:03:42 2012 +0100 + + sna: Remove bogus assertion of no references to in-flight upload buffers + + As we may hold a cached reference to an upload buffer whilst it is + in-flight, the assertion that there are no such references to a buffer + being reused is no longer true. Those cached references will be released + as soon as we retire the buffer during the readback and so we are free + to reuse such an upload buffer for immediate readback. + + Reported-by: Jiri Slaby + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit 89091dd8a3fba6520a651e3e135c87546b81df9b +Author: Paulo Zanoni +Date: Tue Mar 20 11:53:21 2012 -0300 + + Avoid duplicated code with intel_output_create_ranged_atom + + Same change for intel_display.c and sna_display.c. + + Signed-off-by: Paulo Zanoni + Signed-off-by: Chris Wilson + +commit 62f9833298ea936eaefe973eca04b1dde858fbd8 +Author: Chris Wilson +Date: Sun Mar 25 21:25:15 2012 +0100 + + sna/gen2+: Approximate expensive gradients when using imprecise rendering + + If we lack the ability to use a shader to compute the gradients + per-pixel, we need to use pixman to render a fallback texture. We can + reduce the size of this texture and upsample to reduce the cost with + hopefully imperceptible loss of quality. + + Signed-off-by: Chris Wilson + +commit 25807f472d051163ed96556a409110fa405c24d1 +Author: Chris Wilson +Date: Fri Mar 23 14:56:06 2012 +0000 + + uxa: Remove hook for CompositeRectangles + + It was broken and not flushing damage correctly. With the + improvements made to the kernel, it is no longer a significant advantage + per se and not worth its additional complexity. + + Reported-by: Tilman Sauerbeck + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32547 + Signed-off-by: Chris Wilson + +commit 4460c6d0d30cf20b76854d47fd9e3aecf1839f15 +Author: Chris Wilson +Date: Fri Mar 23 11:05:55 2012 +0000 + + configure: Stop the debug build erroring out if it cannot find valgrind + + Another case where I passed an empty string believing that would be + sufficient to replace the error path... + + Signed-off-by: Chris Wilson + +commit 168ecd96f23756e185af627f814f81b8a4c0c529 +Author: Chris Wilson +Date: Thu Mar 22 23:47:56 2012 +0000 + + sna: Make the fallback debugging messages more consistent + + Signed-off-by: Chris Wilson + +commit 8693005b5427f256bcd7c2e7cfc48d56f5b8c5ea +Author: Chris Wilson +Date: Thu Mar 22 23:43:04 2012 +0000 + + sna: Update the target bo after changing from Y tiling + + Signed-off-by: Chris Wilson + +commit 83f98d6e5c303e52c1e0fb95b6237ebf62a8edfe +Author: Chris Wilson +Date: Thu Mar 22 21:57:14 2012 +0000 + + sna: Correctly test for clear glyphs when searching for ones to skip + + With xterm, it is quite common for it to redraw itself by using lots of + spaces and so it is efficient for us if we ellide those clear glyphs and + only draw the backing boxes. However, we were only checking the first 8 + pixels in each line because of a missing pointer increment. + + Fixes absent '=' characters when using a compositor and ImageText. + + Reported-by: Jiri Slaby + +commit 86121a3af9a9fc9a2c76d7ac9f3ec17105d20d80 +Author: Chris Wilson +Date: Thu Mar 22 11:21:43 2012 +0000 + + sna: Adjust the damage region for the composite offset + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47597 + Signed-off-by: Chris Wilson + +commit a6b48dd7f1eeb1a8e3841b8f3326c60b300ee9e9 +Author: Chris Wilson +Date: Thu Mar 22 09:22:52 2012 +0000 + + sna: Force fallbacks if the destination is unattached + + Since the removal of the ability to create a backing pixmap after the + creation of its parent, it no longer becomes practical to attempt + rendering with the GPU to unattached pixmaps. So having made the + decision never to render to that pixmap, perform the test explicitly + along the render paths. + + This fixes a segmentation fault introduced in 8a303f195 (sna: Remove + existing damage before overwriting with a composite op) which assumed + the existence of a backing pixmap along a render path. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47700 + Signed-off-by: Chris Wilson + +commit 52f39ae1697bef86471b7c5eef8553661f255b67 +Author: Chris Wilson +Date: Wed Mar 21 13:31:03 2012 +0000 + + sna: Assert that the bo created is large enough + + Double check that the maximum access size computed from the bo + parameters is within the allocated size for the bo. + + Signed-off-by: Chris Wilson + +commit 2f23c660f58e0db2107255f32a3503dae62fe304 +Author: Chris Wilson +Date: Wed Mar 21 13:30:45 2012 +0000 + + sna: Assert that the tiled blt is correctly clipped + + Signed-off-by: Chris Wilson + +commit e0cd13e2af3db237c171f8ca1c70ddc67b1fbce4 +Author: Chris Wilson +Date: Wed Mar 21 09:06:10 2012 +0000 + + sna: Fallback to inplace upload if forced to tile the indirect replacement + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47629 + Signed-off-by: Chris Wilson + +commit 1db1eced5462723811e535a53cb41b108fc6c5a3 +Author: Chris Wilson +Date: Tue Mar 20 22:57:50 2012 +0000 + + sna: Tidy an assertion when handling tiled copies + + Signed-off-by: Chris Wilson + +commit 38b0cc24b45afd4ed57187fb066896bf1e467f45 +Author: Chris Wilson +Date: Wed Mar 21 01:01:47 2012 +0000 + + sna: Remove the short-circuiting of move-to-cpu for read if no damage + + The danger now is that we may have either discarded the shadow pixels or + have replaced them with a GTT mapping, either way undesirable and so we + should reconstruct the shadow mapping. + + Signed-off-by: Chris Wilson + +commit f49a6b1fd7e23252b2a306f8bdb9baed5c1e8d4b +Author: Chris Wilson +Date: Tue Mar 20 21:36:26 2012 +0000 + + sna: Decouple the private data after UnrealizeFont + + As the font is kept around and reused after UnrealizeFont, we need to + nullify the pointer to our private data in order to prevent the later + use-after-free. + + Reported-by: Peter Jordan + Signed-off-by: Chris Wilson + +commit 1bdd6461de18a6812d5af0283f4222cbb80ca2f8 +Author: Chris Wilson +Date: Tue Mar 20 11:08:44 2012 +0000 + + sna/traps: Remove bogus assertion + + As we only enter that path for singular unbounded boxes, we are + guaranteed to fill the entire trapezoid extents and so do not need the + unbounded fixup the assertion was fretting about. + + Signed-off-by: Chris Wilson + +commit 1c2932e9cb283942567c3dd2695d03b8045da27f +Author: Chris Wilson +Date: Mon Mar 19 15:51:43 2012 +0000 + + uxa: Defer the call to EnterVT till after outputs are initialised + + We need to do this apparently or else we never perform the VT switch. + However, we can not do it too early, especially not before we have + finished intialising the outputs. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47395 + Signed-off-by: Chris Wilson + +commit 972e1108a5606399a679f97af0815ec9730ab5be +Author: Chris Wilson +Date: Mon Mar 19 14:38:28 2012 +0000 + + sna: Declare videoRam correctly on gen2 devices + + Signed-off-by: Chris Wilson + +commit c0bab1df509d1f7fe36173715846c13b931e9be1 +Author: Chris Wilson +Date: Mon Mar 19 08:25:22 2012 +0000 + + sna/dri: Make the drawable as damaged for the off-screen immediate exchange + + In some cases off-screen is stil visible, for example under a rotation. + As such xrandr -o left; glxgears -fullscreen was broken. + + Reported-by: Phillip Haddad + Signed-off-by: Chris Wilson + +commit 17c19ea8e21e1b20eee446045573dfd94ce6f537 +Author: Chris Wilson +Date: Sun Mar 18 13:23:26 2012 +0000 + + sna/traps: Remove separate edge->vertical flag + + Mark vertical edges with dy==0 to reduce structure size and reduce + memory load during edge walking. + + Signed-off-by: Chris Wilson + +commit 82023397cd05c05cfcb8939829a95e287d438875 +Author: Chris Wilson +Date: Sun Mar 18 11:10:14 2012 +0000 + + sna/gen3: Improve clear-to-solid reduction + + Signed-off-by: Chris Wilson + +commit 7ce5f4a11389b2fe9f27a6f09c4848ac71424d5d +Author: Chris Wilson +Date: Sun Mar 18 10:55:17 2012 +0000 + + sna/gen3: Do not force tiling for large pixmaps + + As the extraction routine is now smarter and can construction + subsurfaces without copying we do not need to force tiling. + + Signed-off-by: Chris Wilson + +commit 342dda3fe361c8be2f3af5af1516cdc6a5fdcaa9 +Author: Chris Wilson +Date: Sun Mar 18 10:55:06 2012 +0000 + + sna/gen3: Prevent copy-fallback if we cannot blit + + Signed-off-by: Chris Wilson + +commit 28c089781fdf74a9bac2e138e65383748558fcc1 +Author: Chris Wilson +Date: Sun Mar 18 10:55:27 2012 +0000 + + sna: Fixup the cpu shadow mappings before uploading the box + + On the off-chance we arrive here with a pointer to the GTT mapping. + + Signed-off-by: Chris Wilson + +commit 79258fe560d08dd3dd22b4782360e1597e54948c +Author: Chris Wilson +Date: Sun Mar 18 09:45:27 2012 +0000 + + sna/traps: Apply some more operator and unbounded reductions + + Signed-off-by: Chris Wilson + +commit fe8866d6112c3e187d6682e9e4610325668427a0 +Author: Chris Wilson +Date: Sat Mar 17 21:49:56 2012 +0000 + + sna/gen[345]: Convert CPU mappings to GTT for vertices on submit + + Signed-off-by: Chris Wilson + +commit 97cd0c7da51024400e8900e46f51620a5f7ad402 +Author: Chris Wilson +Date: Sat Mar 17 23:57:46 2012 +0000 + + sna/traps: Upon reducing an ADD to a SRC, we need to apply the pending clear + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47444 + Signed-off-by: Chris Wilson + +commit e31d9dacafe060dc86de801114b475fdd0142eb6 +Author: Chris Wilson +Date: Sat Mar 17 09:21:00 2012 +0000 + + sna/traps: Align indices for unrolled memset in row_inplace() + + The compiler presumes that the uint64_t write is naturally aligned and + so may emit code that crashes with an unaligned moved. To workaround + this, make sure the write is so aligned. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=47418 + Signed-off-by: Chris Wilson + +commit 2b4e11923d9f683f43acf8053bcec1701df25c1f +Author: Chris Wilson +Date: Sat Mar 17 00:05:47 2012 +0000 + + sna/traps: Tune inplace_end_subrows() + + Signed-off-by: Chris Wilson + +commit d887f209f1210a294afc2c3883a97f7ac9f42bad +Author: Chris Wilson +Date: Fri Mar 16 17:19:11 2012 +0000 + + sna/dri: Mesa expects the 8-bit stencil buffer to have 2-bytes per pixel + + The seperate stencil buffer is full of lies, why worry about one more? + + Signed-off-by: Chris Wilson + +commit 63c0d10faee3c7cca050505c2e81c416119e57e9 +Author: Chris Wilson +Date: Fri Mar 16 14:51:53 2012 +0000 + + sna/dri: Improve handling of non-front attachments for CopyRegion + + Confusion reigns between using the backing pixmap for the drawable for + the front buffer, and a fake pixmap for the auxiliary buffers. + + Signed-off-by: Chris Wilson + +commit 324a1dffdc7dd896224fab265bd6a9cf99d7587f +Author: Chris Wilson +Date: Fri Mar 16 13:07:00 2012 +0000 + + sna/gen3: Micro-optimise solid span emission + + Signed-off-by: Chris Wilson + +commit 47c47b85f6b7ef5cbc2192da9ef0cee91f6744ca +Author: Chris Wilson +Date: Fri Mar 16 12:59:13 2012 +0000 + + sna/traps: Micro-optimise span emission + + Signed-off-by: Chris Wilson + +commit 3a26437f195bf3e5d5913f5552a0b838cafb9b2c +Author: Chris Wilson +Date: Fri Mar 16 12:37:25 2012 +0000 + + sna/traps: Tune nonzero_row + + Signed-off-by: Chris Wilson + +commit cb04cf9f4395c258987faead80de5c3a2c93082e +Author: Chris Wilson +Date: Fri Mar 16 09:28:24 2012 +0000 + + sna/traps: Make the inline u8 arithmetic more robust + + Signed-off-by: Chris Wilson + +commit d55bbdf42c75eb0fdb634e963ce81953583964b9 +Author: Chris Wilson +Date: Fri Mar 16 09:18:29 2012 +0000 + + sna/traps: Remove the old paths for mono inplace traps + + Dead code elimination. + + Signed-off-by: Chris Wilson + +commit fe4ad66aadcfa0c907ba6460a88c49e65225602c +Author: Chris Wilson +Date: Thu Mar 15 21:33:00 2012 +0000 + + sna: Correct the order of screen private teardown + + So that we do not keep a stale references of the last cached pixmap + across server regeneration (or shutdown). + + Reported-by: Thierry Reding + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47357 + Signed-off-by: Chris Wilson + +commit 0a8218a535babb5969a58c3a7da0215912f6fef8 +Author: Chris Wilson +Date: Thu Mar 15 13:20:35 2012 +0000 + + sna: Prefer the CPU bo for uploads if last access was not through the shadow + + Signed-off-by: Chris Wilson + +commit 77c9c03b102e6fac2279f0085034557bd68c5112 +Author: Chris Wilson +Date: Thu Mar 15 13:18:43 2012 +0000 + + sna: Fixup the shadow pixmap pointer for move-to-gpu + + If we choose not to use the CPU bo for the upload (because we fear the + subsequent synchronisation cost), we need to fixup the shadow pointer + before dereferencing it. + + On the move-to-cpu side, the fixup is already performed as we will need + to access the shadow pixels for the subsequent drawing operation. + + Signed-off-by: Chris Wilson + +commit 0e2fbb6a1c1ad6b0971d07a91a790b0b3236dad3 +Merge: 64ccc66 84d7a82 +Author: Chris Wilson +Date: Thu Mar 15 12:43:47 2012 +0000 + + uxa: Merge 'remove complicated second level caching' + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47345 + Signed-off-by: Chris Wilson + +commit 84d7a82122530a62ab9a2f4bba3044c23a0db9b0 +Author: Chris Wilson +Date: Sat Mar 10 10:03:23 2012 +0000 + + uxa: Simplify allocation of backing pixmap + + Signed-off-by: Chris Wilson + +commit 1b1016624ad16cf5063e88a1d422e28865a9e87f +Author: Chris Wilson +Date: Sat Mar 10 09:31:24 2012 +0000 + + uxa/i915: Remove broken CA pass, fallback to magic 2-pass composite helper + + The backend failed to handle all the corner cases, so remove the + complication. + + Signed-off-by: Chris Wilson + +commit 895a56a553e1386323a593063e5b7fbb7a410abe +Author: Chris Wilson +Date: Sat Mar 10 09:28:27 2012 +0000 + + uxa: Remove unused render_mask_solid members + + Signed-off-by: Chris Wilson + +commit 9c6f79440e8af9f264e3f6270384064dc1f44721 +Author: Chris Wilson +Date: Sat Mar 10 09:27:36 2012 +0000 + + uxa: Remove unused tracking of the current render target + + Signed-off-by: Chris Wilson + +commit 219467ac8bfab98bca82108b22eae8af3fc0bf36 +Author: Chris Wilson +Date: Sat Mar 10 09:26:10 2012 +0000 + + uxa: Simplify flush tracking + + Signed-off-by: Chris Wilson + +commit bd8fafe0c48df7f138459f590a0e9e8d0c3267b7 +Author: Chris Wilson +Date: Sat Mar 10 09:10:16 2012 +0000 + + uxa: Kill the complicated in-flight tracking + + Reference leak hunting. + + Signed-off-by: Chris Wilson + +commit 64ccc6698def517fc37e9ba3c41715626df0e3ca +Author: Thierry Reding +Date: Thu Mar 15 13:10:20 2012 +0100 + + configure: Keep passed-in CFLAGS for DRI tests + + When the user passes extra CFLAGS and CPPFLAGS to the configure script, + they should be kept when performing subsequent checks with additional + flags. This is required to properly build in cross-compilation setups + where the user may pass in flags like --sysroot in order to pick up the + cross-built dependencies. + + Signed-off-by: Thierry Reding + +commit c5c61ef378cad3c8259631138ea1e03eb02036af +Author: Chris Wilson +Date: Thu Mar 15 12:38:22 2012 +0000 + + sna/traps: dst IN WHITE does not reduce to SRC! + + I was getting too carried with my reductions. However, IN over a + clear surface is a no-op, though unlikely! + + Signed-off-by: Chris Wilson + +commit fba49e1bb8e5b6b0e3ceace2dbddb5796ece954e +Author: Chris Wilson +Date: Thu Mar 15 10:31:51 2012 +0000 + + sna/traps: Fix off-by-one for filling vertical segments in tor_inplace + + If the last solid portion was exactly 4-pixels wide, we would miss + filling in the mask. + + Signed-off-by: Chris Wilson + +commit 27f8f121b3d7433c6c3470b048428ca088acd2c9 +Author: Chris Wilson +Date: Wed Mar 14 23:43:20 2012 +0000 + + sna/damage: Handle a reduced damage rather than assert + + As we may reduce a damage to empty along the migration paths and not + detect that reduced damage till later, handle those scenarios rather + asserting. + + References: https://bugs.freedesktop.org/show_bug.cgi?42426 + Signed-off-by: Chris Wilson + +commit abd104600252f0ebd1eb77eb5419693e1c17deda +Author: Chris Wilson +Date: Wed Mar 14 23:08:31 2012 +0000 + + sna: Treat unmapped but CPU-mappable bo as available for mapping + + Signed-off-by: Chris Wilson + +commit 2c492c0064e23457bffdf4f9ab1a7c9f1be93a87 +Author: Chris Wilson +Date: Wed Mar 14 23:05:58 2012 +0000 + + sna: Disable tiling for single row pixmaps (unless required for hw limits) + + Signed-off-by: Chris Wilson + +commit 6890592cd2b2d6f0d06c530f5e770fdc98577d4f +Author: Chris Wilson +Date: Wed Mar 14 21:30:13 2012 +0000 + + sna/traps: Explicitly create an unattach pixmap for fallback + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42426 + Signed-off-by: Chris Wilson + +commit 23b5640a0f8d8a944275e574f4c72f2380f7ed7a +Author: Chris Wilson +Date: Wed Mar 14 20:48:56 2012 +0000 + + sna: Avoid using kgem_bo_reference() internally + + So that we can keep the assertion to track the refcnt elsewhere. + + Signed-off-by: Chris Wilson + +commit 03731b4e37b0cbd3a1cb8c8ec08fddf0f670a918 +Author: Chris Wilson +Date: Wed Mar 14 20:46:59 2012 +0000 + + sna: Ellide no-op image glyphs + + Signed-off-by: Chris Wilson + +commit d0e05b4294b2f150a41dd95d52c2e6ee8479283d +Author: Chris Wilson +Date: Wed Mar 14 20:19:30 2012 +0000 + + sna: Don't mark cached upload buffers for inactivity expiration + + As these do not follow the normal rules of damage tracking, we have to + be careful not to force migration. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42426 + Signed-off-by: Chris Wilson + +commit 96ead26c4dddab637875c74a9afca6fd6662352b +Author: Chris Wilson +Date: Wed Mar 14 19:56:42 2012 +0000 + + sna: Add a couple of asserts for inactive_partial reference counting + + Signed-off-by: Chris Wilson + +commit 6a4ac18e37521d54dc36b215cbd27c56d20b2922 +Author: Chris Wilson +Date: Wed Mar 14 11:51:39 2012 +0000 + + sna/traps: Use a more direct fallback path for the CPU + + Signed-off-by: Chris Wilson + +commit 8580677ee6725144acf63f5cc2f8097376352d6e +Author: Chris Wilson +Date: Wed Mar 14 11:46:18 2012 +0000 + + sna/traps: Rasterise using pixman inplace where appropriate + + Signed-off-by: Chris Wilson + +commit 8a303f195b53a78dcbb2b6c84e7e691bedc86d25 +Author: Chris Wilson +Date: Wed Mar 14 11:26:03 2012 +0000 + + sna: Remove existing damage before overwriting with a composite op + + Signed-off-by: Chris Wilson + +commit 63eeb98463a77adadc26d9de1e640b75eefebf1a +Author: Chris Wilson +Date: Wed Mar 14 10:30:47 2012 +0000 + + sna/gen3: Look harder to see if we can indeed use the BLT for composite + + Signed-off-by: Chris Wilson + +commit d23ee0380b61e0dfd3ed56b8b4a15fd0b7956491 +Author: Chris Wilson +Date: Tue Mar 13 22:00:25 2012 +0000 + + sna: Reuse the cached upload as a source GPU bo + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42426 + Signed-off-by: Chris Wilson + +commit 0acec1685328b1dd9dffa804a27a122fc6e4225a +Author: Chris Wilson +Date: Tue Mar 13 21:29:57 2012 +0000 + + sna: Defer the release of the upload buffer cache till retirement + + Signed-off-by: Chris Wilson + +commit 06b28d541bdf2607edc2eb476919b28e747885d8 +Author: Chris Wilson +Date: Tue Mar 13 20:01:53 2012 +0000 + + sna: Destroy the cached upload buffer if before copying into it + + As we discard the buffer after the next batch, we will lose the contents + of the pixmap. Instead discard the cache, and treat it as a normal + shadow again. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42426 + Signed-off-by: Chris Wilson + +commit 015db20287ec90f81ddb7eb2e7ce23b90aacfb2b +Author: Chris Wilson +Date: Tue Mar 13 16:29:41 2012 +0000 + + sna: Refactor source upload-to-gpu + + This was originally split between into functions for flexibility that + nothing used, so merge the duplicated code into a common function. + + Signed-off-by: Chris Wilson + +commit 6dfe28f978b59ab2fc44cdd8ddf3743d6507588b +Author: Chris Wilson +Date: Tue Mar 13 15:47:27 2012 +0000 + + sna/gen6: Remove the double application of the render offset + + Cut'n'paste error from an older generation. + + Signed-off-by: Chris Wilson + +commit c751242e245eb168b92616bdcea3421be4e420bc +Author: Chris Wilson +Date: Tue Mar 13 12:04:04 2012 +0000 + + sna: Only use the cpu bo for xfer between CPU and GPU if either is busy + + The synchronisation costs overwhelm any benefit from offloading the + copy, unless we are currently streaming the updates anyway. + + Signed-off-by: Chris Wilson + +commit c9668a772f15ab36d643a9b0616b309856146c89 +Author: Chris Wilson +Date: Mon Mar 12 23:28:51 2012 +0000 + + sna: Reduce OVER with a clear pixmap to a BLT + + Signed-off-by: Chris Wilson + +commit 2ea58256f5ce6e1c0f48d366ff7a1fbf300600de +Author: Chris Wilson +Date: Mon Mar 12 23:05:17 2012 +0000 + + sna: Reuse the same upload buffer for the duration of the batch + + Signed-off-by: Chris Wilson + +commit 8b9abe2be1f54bd8e8593ed155cc4725ac97627a +Author: Chris Wilson +Date: Mon Mar 12 21:09:19 2012 +0000 + + sna: Prefer to render very thin trapezoids inplace + + Signed-off-by: Chris Wilson + +commit 1e2d6ee31a21267ba27e4bebb883aaab08a12f30 +Author: Chris Wilson +Date: Mon Mar 12 20:34:42 2012 +0000 + + sna: Always reset the source counter after rendering to with the CPU + + The goal is to avoid moving to the GPU too early for a frequently + modified CPU buffer. + + Signed-off-by: Chris Wilson + +commit 7bde1f55a1075eefab0f083833508265fc0e91e7 +Author: Chris Wilson +Date: Mon Mar 12 20:25:50 2012 +0000 + + sna: After move-to-gpu signals yes, force the GPU bo creation + + Signed-off-by: Chris Wilson + +commit 2ee7de1f1711d1058e5812c6aa0d94ecf9af7d8d +Author: Chris Wilson +Date: Mon Mar 12 20:09:05 2012 +0000 + + sna/trapezoids: Reduce mono ADD/OVER against a clear background to a SRC + + Signed-off-by: Chris Wilson + +commit 99c239e380b9f5134afc75bf55bf3f69e5113e38 +Author: Chris Wilson +Date: Mon Mar 12 19:49:30 2012 +0000 + + sna: Treat backing pixmaps no differently from their forward facing cousins + + Another fix for the large buffers overhaul. + + Signed-off-by: Chris Wilson + +commit 28792be1f31190171644d911d7b5573186fe2df2 +Author: Chris Wilson +Date: Mon Mar 12 19:45:35 2012 +0000 + + sna/display: Only flush pending output when installing a new scanout + + Signed-off-by: Chris Wilson + +commit 278c329b9e2aa9a94bd0d0ee73939814ac514e3d +Author: Chris Wilson +Date: Mon Mar 12 11:50:54 2012 +0000 + + sna/trapezoids: Further improve the clipping criteria for inplace traps + + Not only must we defend against the span starting too far to the right, + we must also defend against the span terminating too far to the left. + + Signed-off-by: Chris Wilson + +commit 7ae45584327a10b05f7aee99bcb71e9d990a3e9b +Author: Chris Wilson +Date: Mon Mar 12 10:49:46 2012 +0000 + + sna/trapezoids: Add paranoia to ensure that the span starts within the clip + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47226 + Signed-off-by: Chris Wilson + +commit 8136bc5e113ae06c30def3c91b1615e5fab8af44 +Author: Chris Wilson +Date: Sun Mar 11 19:45:55 2012 +0000 + + sna: Make the maximum BLT pitch assertions consistent + + The maximum permissibly BLT pitch value is 32767, so make the assertions + match... + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47206 + Signed-off-by: Chris Wilson + +commit 989615493608525fc252e4e94ac7259cba0741f5 +Author: Chris Wilson +Date: Fri Mar 9 22:44:16 2012 +0000 + + sna: Feed fallback mono trapezoids through the mono rasteriser + + Signed-off-by: Chris Wilson + +commit 552e4fbd2c25eb5ab0ae77e11f5f8ba2fdb29daa +Author: Chris Wilson +Date: Fri Mar 9 20:02:44 2012 +0000 + + sna/traps: Add a fast path for narrow masks + + Signed-off-by: Chris Wilson + +commit 494edfaaacaae13adfa5e727c66a83cb2294d330 +Author: Chris Wilson +Date: Fri Mar 9 12:19:33 2012 +0000 + + sna: Handle partial reads with a pending clear + + Skip the filling of the whole pixmap if we have a small read and we + know the GPU bo is clear. Also choose to operate inplace on the GPU bo + if we meet the usual criteria. + + Signed-off-by: Chris Wilson + +commit bd62dc73dcdbab34aa5c83382e46c7315d554a1a +Author: Chris Wilson +Date: Fri Mar 9 10:37:34 2012 +0000 + + sna/traps: Apply somes simple but common operator reduction for clipmasks + + Signed-off-by: Chris Wilson + +commit c25a3f7f46010660f441070ab7b9d5d1bc39ed0d +Author: Chris Wilson +Date: Fri Mar 9 09:43:46 2012 +0000 + + sna/dri: Only delivered a delayed flip if the drawable is still on the root + + Signed-off-by: Chris Wilson + +commit 93846b468e778440549ef0cae171c7fe9678ed9a +Author: Chris Wilson +Date: Fri Mar 9 09:43:24 2012 +0000 + + sna/traps: Remove some dead code + + This function was never used in this implementation, remove it. + + Signed-off-by: Chris Wilson + +commit 90c995736555ce14b08b69a42832d9774ba58304 +Author: Chris Wilson +Date: Fri Mar 9 00:37:32 2012 +0000 + + sna: Emit a INFO when compiled with debugging enabled + + It is useful to know and to receive confirmation that you have + successfully compiled and executed the driver with debugging enabled. + + Signed-off-by: Chris Wilson + +commit 2e194f33db0437ea2f25c22efdad9552aefcab2f +Author: Chris Wilson +Date: Thu Mar 8 18:07:22 2012 +0000 + + sna/traps: Fix the initialisation of the error term for vertical mono edges + + Signed-off-by: Chris Wilson + +commit 635c604b787625f93763001951f8bdf66482c682 +Author: Chris Wilson +Date: Thu Mar 8 18:06:51 2012 +0000 + + sna/traps: Unroll insertion sort + + As the compiler cannot know the loop is bounded by a sentinel, manually + unroll it. + + Signed-off-by: Chris Wilson + +commit a087430ad99c06e79249d2cdd019cb8bf7f955d3 +Author: Chris Wilson +Date: Thu Mar 8 17:13:39 2012 +0000 + + sna/gen6: Replace the memset with explict initialisation + + The profiles told me to kill it... + + Signed-off-by: Chris Wilson + +commit 61226cd41faf320f79ee4bd72dc77163079da853 +Author: Chris Wilson +Date: Thu Mar 8 13:41:58 2012 +0000 + + sna: Fix handling of large glyphs following large and shared buffer work + + Part of the large buffer handling was to move the decision making about + whether to create GPU bo for a pixmap to creation time. The single + instance where we change our minds later is involving large glyphs which + we choose not to cache. + + Signed-off-by: Chris Wilson + +commit aa7a2bd71275e069a2e4383a26355854b0b8044c +Author: Chris Wilson +Date: Thu Mar 8 12:27:23 2012 +0000 + + sna: Fix reversed logic for CREATE_NO_RETIRE + + If the flag is set, we cannot retire, not the other way around! + + Signed-off-by: Chris Wilson + +commit f8d520950edb5cec878999a09d3f7e6f8b15bf5e +Author: Chris Wilson +Date: Thu Mar 8 12:13:36 2012 +0000 + + sna: Avoid NULL deference in DBG + + Only print out the details of the allocated CPU bo, if we actually + allocate it. + + Signed-off-by: Chris Wilson + +commit 33af42e6284f104ed3c4cdba4bf3b1c29322ce9c +Author: Chris Wilson +Date: Thu Mar 8 12:10:24 2012 +0000 + + sna: Force the creation of a backing pixmap for scanout + + Ordinarily if the GPU is wedged, we just want to create a shadow buffer. + Except that we must ensure that we do allow a bo to be created for + attaching to the scanout. + + Signed-off-by: Chris Wilson + +commit 6abfa4c5662e5294edc501953dbfa7aabf0b2f57 +Author: Chris Wilson +Date: Thu Mar 8 11:59:02 2012 +0000 + + sna: Mark the pixmap for writing when creating the screen resources + + Signed-off-by: Chris Wilson + +commit 5c5ebd6a3ecf3bd83747003bc272a736b7c333c0 +Author: Chris Wilson +Date: Thu Mar 8 11:13:34 2012 +0000 + + intel: Fix typo s/asert/assert/ + + The joy of conditional compiles masked this compilation failure when + testing. + + Reported-by: Reinhard Karcher + Signed-off-by: Chris Wilson + +commit f6474883d325cff443da9ceaa99ec734e6cdc1d6 +Author: Chris Wilson +Date: Thu Mar 8 11:04:05 2012 +0000 + + sna/gen2+: Use the reduced operator from CompositeRectangles + + Do not attempt to further reduce the operator locally in each backend as + the reduction is already performed in the upper layer. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42606 + Signed-off-by: Chris Wilson + +commit 2ae3cd36ae98fa43716ef482e70364e7563cf1ea +Author: Chris Wilson +Date: Thu Mar 8 10:51:05 2012 +0000 + + sna: Tidy marking pixmap->clear for CompositeRectangles + + Reduce the two unsightly checks into one. + + Signed-off-by: Chris Wilson + +commit 8b21659ef2f9cec799b8215a2e5481667bc744bf +Author: Chris Wilson +Date: Thu Mar 8 10:50:32 2012 +0000 + + sna: Add some assertions around pixmap creation for render operations + + Signed-off-by: Chris Wilson + +commit 7d74300647dd815ae5b4399f84ea339045d12563 +Author: Chris Wilson +Date: Thu Mar 8 09:54:16 2012 +0000 + + sna: Discard unbound partial buffers + + Instead of keeping a virgin partial buffer around on its inactive list, + just transfer it to the global bo cache (in actuality destroy it since + it is just a kmalloc with no pages bound). + + Signed-off-by: Chris Wilson + +commit 9eb8ba4df2a99342dbb3569c043d84aa82506aba +Author: Chris Wilson +Date: Thu Mar 8 09:42:58 2012 +0000 + + sna: Preserve the offset alignment when trimming unused rows from partials + + Signed-off-by: Chris Wilson + +commit 8e6166a0e87a00248d0d4925953c923850f5b840 +Author: Chris Wilson +Date: Thu Mar 8 02:09:25 2012 +0000 + + sna: Becareful not to reduce operators for superluminal colors + + wine-1.4 is such an example of a crazy application. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42606 + Signed-off-by: Chris Wilson + +commit 3f73cc706ff39cd4c10433791f12b5f829f62e6d +Author: Chris Wilson +Date: Thu Mar 8 08:54:24 2012 +0000 + + sna/dri: Use a counter for the number of DRI drawables attached to a pixmap + + The root pixmap, for instance, may have unique DRI2Drawables for each + inferior window. We only want to clear the flush flag on the last + release, so we need to keep a count of how many DRI drawables remain + attached rather than a solitary flag. + + Signed-off-by: Chris Wilson + +commit 49a80ce1ff336fb2fa7d214bd3fddbce5a62b77a +Author: Chris Wilson +Date: Wed Mar 7 15:52:41 2012 +0000 + + sna/gen2+: Prefer not to fallback if the source is busy + + As if we try to perform the operation with outstanding operations on the + source pixmaps, we will stall waiting for them to complete. + + Signed-off-by: Chris Wilson + +commit 4899740f6f0f5b1a5b2b3490502ccdeb7b092877 +Author: Chris Wilson +Date: Thu Mar 8 00:57:12 2012 +0000 + + sna: Do not reset partial buffers if they are not attached to the current batch + + As we may be holding on to them as an active mapping whilst they are + executing; reseting the used counter back to zero in this case can cause + corruption. + + Signed-off-by: Chris Wilson + +commit 72a7538d4e7bcf0bd7455d9e67d8751e17739e6c +Author: Chris Wilson +Date: Wed Mar 7 15:45:21 2012 +0000 + + sna: Convolution filter fixes + + A couple of typos made the convolution filter explode rather than + convolve. + + Signed-off-by: Chris Wilson + +commit 34fe3cbb316c36c7022735cf9b03d8b655e04434 +Author: Chris Wilson +Date: Wed Mar 7 17:49:01 2012 +0000 + + sna: Avoid recursive calls to kgem_retire_partials() + + Whilst iterating the partial list and uploading the buffers, we need to + avoid trigger a recursive call into retire should we attempt to shrink a + buffer. Such a recursive call will modify the list beneath us so that we + chase a stale pointer and wreak havoc with memory corruption. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47061 + Signed-off-by: Chris Wilson + +commit 46c79e4d59ec4f90a1fa97b24a3e7058fdbfa6ba +Author: Chris Wilson +Date: Wed Mar 7 13:17:21 2012 +0000 + + sna: Restore checking for all-clipped-out for CompositeRectangles + + In the refactoring to avoid repeatedly applying the singular + pCompositeClip, the check for the all-clipped state was lost. + + Signed-off-by: Chris Wilson + +commit 9944f1834a9c53091e4415f928f917e9247f17c5 +Author: Chris Wilson +Date: Wed Mar 7 10:47:42 2012 +0000 + + sna/gen2: Fix transformation of linear gradients + + Signed-off-by: Chris Wilson + +commit df25495eaab5bcd5baf86047a2dd0149eea00d1e +Author: Chris Wilson +Date: Wed Mar 7 10:43:24 2012 +0000 + + sna/gen4: Hook in the poor-man's linear gradient + + Signed-off-by: Chris Wilson + +commit 69d6a0387b8eec8396631714a0564b7e28d187ab +Author: Chris Wilson +Date: Wed Mar 7 10:43:24 2012 +0000 + + sna/gen5: Hook in the poor-man's linear gradient + + Signed-off-by: Chris Wilson + +commit b0d3c4f661bace84b78b194eaeee7bfa009a32cf +Author: Chris Wilson +Date: Wed Mar 7 10:43:24 2012 +0000 + + sna/gen7: Hook in the poor-man's linear gradient + + Signed-off-by: Chris Wilson + +commit dcc364a7b190ce9cec2ff35aa22c10529f84e4c3 +Author: Chris Wilson +Date: Wed Mar 7 10:40:50 2012 +0000 + + sna/gen6: Add poor-man's linear implementation + + Still no JIT, in the meantime we can at least cache the gradient ramps. + + Signed-off-by: Chris Wilson + +commit 232972c0e5bd833c1d0b33432fa8092c601fd0e5 +Author: Chris Wilson +Date: Tue Mar 6 12:17:03 2012 +0000 + + sna: Remove the 2-step damage flush + + The idea was to reduce the number of unnecessary flushes by checking for + outgoing damage (could be refined further by inspecting the reply/event + callback for a XDamageNotifyEvent). However, it does not flush + sufficiently for the compositors' liking. As it doesn't appear to restore + performance to near uncomposited levels anyway, remove the complication. + + Signed-off-by: Chris Wilson + +commit eb10ade0fc8e21cd01c0d8acba7891fd7f2aa222 +Author: Chris Wilson +Date: Mon Mar 5 22:55:57 2012 +0000 + + sna: Defer the FlushCallback removal until after the next flush + + Try to reduce the amount of Add/Delete ping-pong, in particular around + the recreation of the DRI2 attachment to the scanout after pageflipping. + + Signed-off-by: Chris Wilson + +commit 60dacdb127599606db13ad111af8ce26c1141da5 +Author: Chris Wilson +Date: Mon Mar 5 22:46:20 2012 +0000 + + sna: Only install the flush callback for the duration of the foriegn buffer + + After we are no longer sharing the bo with foreign clients, we no longer + need to keep flushing before every X_Reply and so we can remove the + callbacks to remove the overhead of having to check every time. + + Signed-off-by: Chris Wilson + +commit b39d9f9166547effe066acfc3327dd88a019d273 +Author: Chris Wilson +Date: Mon Mar 5 22:29:38 2012 +0000 + + sna: Check for flush at the start of every WriteToClient + + The goal is to simply avoid the flush before going to sleep when we have + no pending events. That is we only want to flush when we know there will + be at least on X_Reply sent to a Client. (Preferably, it would a Damage + reply!) We can safe assume that every WriteToClient marks the beginning + of a new reply added to the Client output queue and thus know that upon + the next flush event we will emitting a Reply and so need to submit our + batches. + + Second attempt to fix a438e4ac. + Signed-off-by: Chris Wilson + +commit f30b0beea4f5657a60eb5b286f41105298fa451a +Author: Chris Wilson +Date: Sun Mar 4 22:23:39 2012 +0000 + + sna/trapezoids: Ellide empty cells + + Signed-off-by: Chris Wilson + +commit b69c9dfae128ed69a397a066b8fbe62012742bf1 +Author: Chris Wilson +Date: Mon Mar 5 21:05:34 2012 +0000 + + sna/composite: Skip clipping the rectangle region against the singular clip + + As we will already have taken it into account when constructing the + region from the rectangles. + + Signed-off-by: Chris Wilson + +commit f4846168a60feca7437f0039612ba9986c5f8d77 +Author: Chris Wilson +Date: Mon Mar 5 21:04:25 2012 +0000 + + sna: Flush dirty CPU damage before notifying the compositor + + Fixes regression from a438e4ac (sna: Revamp vmap support) + Signed-off-by: Chris Wilson + +commit d7600e4e7726bb8bd6c7256ad2baf195d4427c60 +Author: Chris Wilson +Date: Sun Mar 4 19:12:29 2012 +0000 + + sna: Add some assertions to partial buffer list tracking + + Signed-off-by: Chris Wilson + +commit 3b5d556a93ac0afebf6c1dd02e0c92f6eb73f633 +Author: Chris Wilson +Date: Sun Mar 4 15:48:33 2012 +0000 + + sna: Fix assertion for checking inactive shadow buffers + + We may have an ordinary malloc with no CPU bo attached so check before + dereferencing. + + Signed-off-by: Chris Wilson + +commit aaed9e9722aa30a3d6dc9a3f07309655de65b6bd +Author: Chris Wilson +Date: Fri Mar 2 23:31:24 2012 +0000 + + sna: Encourage promotion of snooped CPU bo to real GPU bo + + This fixes the regression in performance of fishietank on gen2. As + the texture atlas is too large to be tiled, one might presume that it + has the same performance characteristics as the snooped linear CPU + buffer. It does not. Therefore if we attempt to reuse a vmap bo, promote + it to a full GPU bo. This hopefully gains the benefit of avoiding the + copy for single shot sources, but still gives us the benefit of avoiding + the clflushes. + + On the plus side, it does prove that gen2 handles snoopable memory from + both the blitter and the sampler! + + Signed-off-by: Chris Wilson + +commit 599cd0e8ef3080fc735860bef4e47107c1c05f9a +Author: Chris Wilson +Date: Fri Mar 2 20:18:32 2012 +0000 + + sna: Align allocations with partial buffers to 64 bytes. + + A magic number required for so many functions of the GPU. In this + particular case it is likely to be that the offset of a texture in the + GTT has to have a minimum alignment of 64 bytes. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46415 + Signed-off-by: Chris Wilson + +commit 4918e309dfadaf14da6997468f08db03ac0a6327 +Author: Chris Wilson +Date: Fri Mar 2 18:18:48 2012 +0000 + + sna: Silence an assertion failure during shutdown + + Clear the scanout flag on the front buffer during teardown to silence + the debugger. + + Signed-off-by: Chris Wilson + +commit f890fc25c6c2ca358323be5a0d636c3f2ab4b298 +Author: Chris Wilson +Date: Fri Mar 2 18:11:56 2012 +0000 + + sna: And fix compilation for last commit + + I skipped a GCC warning about the implicit function declaration, which + of course results in a runtime silent death. Oops. + + Signed-off-by: Chris Wilson + +commit 4f853acfeccb92885f154b03125d5716591a87bd +Author: Chris Wilson +Date: Fri Mar 2 17:36:50 2012 +0000 + + sna: Prevent backing pixmaps being created later + + We used to allow the backing pixmap to be created later in order to + accommodate ShmPixmaps and ShmPutImage. However, they are now correctly + handled upfront if we choose to accelerate those paths, and so all + choice over whether to attach to a pixmap are made during creation and + are invariant. + + Signed-off-by: Chris Wilson + +commit 866a61a2590f0c5ae6592a13d4e3de3e68f5e373 +Author: Chris Wilson +Date: Fri Mar 2 16:06:59 2012 +0000 + + sna: Disable vmap on 965gm + + The sampler just dies if it encounters a snoopable page, for no apparent + reason. Whilst I encountered the bug on Crestline, disable it for the + rest of gen4 just to be safe. + + Signed-off-by: Chris Wilson + +commit 1c653786895fc30be0e88455ce5f9caf9adc835d +Author: Chris Wilson +Date: Fri Mar 2 14:34:23 2012 +0000 + + sna: Pass usage hint for creating linear buffers + + As we wish to immediate map the vertices buffers, it is beneficial to + search the linear cache for an existing mapping to reuse first. + + Signed-off-by: Chris Wilson + +commit 29ec36ff063472e0744af99aa81ed5ad8e291a36 +Author: Chris Wilson +Date: Fri Mar 2 10:01:07 2012 +0000 + + sna: Only discard the inplace flag for LLC partial buffers + + KGEM_BUFFER_WRITE_INPLACE is WRITE | INPLACE and so the typo prevented + uploading of partial data through the pwrite paths. + + Signed-off-by: Chris Wilson + +commit f039ccf9587eb07528034c3247a6e700c87a5500 +Author: Chris Wilson +Date: Fri Mar 2 09:47:10 2012 +0000 + + sna: Be careful not to discard the clear operation for move-region-to-cpu + + When moving only a region to the CPU and we detect a pending clear, we + transform the operation into a move whole pixmap. In such situations, we + only have a partial damage area and so need to or in MOVE_READ to + prevent the pending clear of the whole pixmap from being discarded. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=46792 + Signed-off-by: Chris Wilson + +commit 392593e61dac3ac65ee8e32de492c4439413ee85 +Author: Chris Wilson +Date: Thu Mar 1 17:54:51 2012 +0000 + + sna/gen5: Help the compiler avoid an uncached read + + Debug builds are excruitatingly slow as the compiler doesn't store the + temporary in a register but uses an uncached readback instead. Maybe + this will help... + + Signed-off-by: Chris Wilson + +commit 9c0c04cac245db046ef17ff24c32e6ab93535f48 +Author: Chris Wilson +Date: Thu Mar 1 14:52:39 2012 +0000 + + sna: Split storage of inactive partials + + As we now attempt to keep retain partial buffers after execution, we can + end up will lots of inactive buffers sitting on the partial buffer list. + In any one batch, we wish to minimise the number of buffers used, so + keep all the inactive buffers on a seperate list and only pull from them + as required. + + Signed-off-by: Chris Wilson + +commit a438e4ac9ba162e870fb22bc54024d35daa2121e +Author: Chris Wilson +Date: Tue Feb 28 19:15:34 2012 +0000 + + sna: Revamp vmap support + + Dust off the kernel patches and update to reflect the changes made to + support LLC CPU bo, in particular to support the unsynchronized shadow + buffers. + + However, due to the forced synchronisation required for strict client + coherency we prefer not to use the vmap for shared pixmaps unless we are + already busy (i.e. sync afterwards rather than before in the hope that + we can squash a few operations into one). Being able to block the reply + to the client until the request is actually complete and so avoid the + sync remains a dream. + + Signed-off-by: Chris Wilson + +commit 272f5d9f8407d8084846b429c1722bddb3e861e9 +Author: Chris Wilson +Date: Thu Mar 1 11:10:03 2012 +0000 + + sna: Discard use of inplace GTT uploads on LLC architectures + + As the buffer is cache-coherent, we can read as well as write to any + partial buffer so the distinction is irrelevant. + + Signed-off-by: Chris Wilson + +commit 43b1a717bae047c7ebbf99e6fa4c03b7a67896b8 +Author: Chris Wilson +Date: Tue Feb 28 13:37:14 2012 +0000 + + sna: Sort the partial buffers after stealing a write buffer + + It will be decoupled and not used again, but this keeps the sanity + checks happy. + + Signed-off-by: Chris Wilson + +commit 8198e5872c3771e2aefabe1e3e93afa94d2ea0ec +Author: Chris Wilson +Date: Tue Feb 28 10:42:19 2012 +0000 + + sna/gen3: Tweak glyph rendering fast paths + + Signed-off-by: Chris Wilson + +commit 3c4f29820bca336af2c997bafc7ef288b455813c +Author: Chris Wilson +Date: Mon Feb 27 16:29:38 2012 +0000 + + uxa/gen3: Remove special casing of solid pictures + + Fixes use of alpha-groups and opacity masks in cairo. + + Signed-off-by: Chris Wilson + +commit 8f3066f0c70654f04f4acadf140e3c5c8dda051d +Author: Chris Wilson +Date: Mon Feb 27 13:58:58 2012 +0000 + + sna/gen2; Initialise channel.is-opaque for fills + + Signed-off-by: Chris Wilson + +commit 3640a0d4cb9e0f115fda9ea36212670f6ccafb22 +Author: Chris Wilson +Date: Mon Feb 27 12:28:22 2012 +0000 + + Revert "meh" + + This reverts commit 4adb6967a84af8a04769c2d936a41f4a49ed1428. + + Oops, this debugging commit was not intended to be pushed along with the + bugfix. :( + + Signed-off-by: Chris Wilson + +commit 6fd8d74a6aedb6484e53e704d9f44e0bf83ae9ab +Author: Chris Wilson +Date: Mon Feb 27 12:06:50 2012 +0000 + + sna: Upload the ordinary partial buffers! + + Signed-off-by: Chris Wilson + +commit 4adb6967a84af8a04769c2d936a41f4a49ed1428 +Author: Chris Wilson +Date: Mon Feb 27 11:36:35 2012 +0000 + + meh + +commit 4fbb0baff525115037f7e5a1689541880a6cdafb +Author: Chris Wilson +Date: Sun Feb 26 22:34:30 2012 +0000 + + sna: Avoid reusing mmapped partial write buffers for readback + + An artefact of retaining the mmapped partial buffers is that it + magnified the effect of stealing those for readback, causing extra + writes on non-llc platforms. + + Signed-off-by: Chris Wilson + +commit a3c398a6731874ba47e0a46bbd42bf9378e12ab8 +Author: Chris Wilson +Date: Sat Feb 25 10:59:14 2012 +0000 + + sna: Retain unfinished partial buffers between batches + + Signed-off-by: Chris Wilson + +commit 8d773b88f45594f45174dc6f1a264d968690ce84 +Author: Chris Wilson +Date: Sat Feb 25 09:32:20 2012 +0000 + + sna/gen3+: Keep the vertex buffer resident between batches + + Signed-off-by: Chris Wilson + +commit 8cb773e7c809e1de23cd64d3db862d1f8e7e955a +Author: Chris Wilson +Date: Sat Feb 25 11:07:16 2012 +0000 + + sna: Ensure we trigger a retire for search_linear_cache + + Bo used for batch buffers are handled differently and not tracked + through the active cache, so we failed to notice when we might be able + to run retire and recover a suitable buffer for reuse. So simply always + run retire when we might need to create a new linear buffer. + + Signed-off-by: Chris Wilson + +commit b1b4db8942e69d47aabfad3751165dc2252fa448 +Author: Chris Wilson +Date: Sat Feb 25 00:43:30 2012 +0000 + + sna: Skip a tiled bo when searching the cache for a linear mmap + + If we change tiling on a bo, we are effectively discarding the cached + mmap so it is preferable to look for another. + + Signed-off-by: Chris Wilson + +commit 85e48d2e5eb029d8c17714cb5e7db39ea06a2455 +Author: Chris Wilson +Date: Fri Feb 24 21:40:44 2012 +0000 + + legacy: Rename XF86DRI to HAVE_DRI1 to avoid conflicts with xorg-server.h + + We use the XF86DRI as a user configurable option to control whether to + build DRI support for i810, but it is also used internally within xorg + and there exists a public define in xorg-server.h which overrides our + configure option. So rename our define to HAVE_DRI1 to avoid the + conflict. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46590 + Signed-off-by: Chris Wilson + +commit 96db90e819a1990c2d139725e522055e92def959 +Author: Chris Wilson +Date: Fri Feb 24 21:36:30 2012 +0000 + + legacy: Delete unused XF86DRI_DEVEL #define + + References: https://bugs.freedesktop.org/show_bug.cgi?id=46590 + Signed-off-by: Chris Wilson + +commit b870a3e5cd922ce37050ece73e2469802dd21da2 +Author: Chris Wilson +Date: Fri Feb 24 11:21:49 2012 +0000 + + configure, NEWS: Bump version to 2.18.0 for release + + Another quarter, a bit late as I was debugging a few regressions, + another release. + + Signed-off-by: Chris Wilson + +commit 5b5cd6780ef7cae8f49d71d7c8532597291402d8 +Author: Chris Wilson +Date: Fri Feb 24 11:14:26 2012 +0000 + + uxa: Add a option to disable the bo cache + + If you are suffering from regular X crashes and rendering corruption + with a flood of ENOSPC or even EFILE reported in the Xorg.log, try + adding this snippet to your xorg.conf: + + Section "Driver" + Option "BufferCache" "False" + EndSection + + References: https://bugs.freedesktop.org/show_bug.cgi?id=39552 + Signed-off-by: Chris Wilson + +commit f8ca50818cd4f82e0ad8eeb245e8ee838b083056 +Author: Gaetan Nadon +Date: Sat Feb 18 13:49:02 2012 -0500 + + Revert "Update autotools configuration" + + This reverts commit 9184af921bc2f332fcb6c9b47001414378eab8e2. + + All X.Org modules must be able to be configured with autoconf 2.60. + In addition, version 2.63 has GPL licensing issues which prevents + some vendor to release software based on it. + + The AM_SILENT_RULES are already handled by XORG_DEFAULT_OPTIONS. + + All X.Org modules must be able to be configured with libtool 1.5. + + AM_MAINTAINER_MODE default value is "enabled" already. + + We use the same autogen script for all x.org modules. + There are proposals for changes which should be reviewed and eventually + applied to all modules together. + + The lt*.m4 patterns are already included in the root .gitignore file. + This can be proposed as a change to all modules, but it invloves + changing the topvel .gitignore, the m4/.gitignore, the ACLOCAL_AMFLAGS + and the AC_CONFIG_MACRO_DIR together. + + For more information on project wide configuration guidelines, + consult http://www.x.org/wiki/ModularDevelopersGuide + and http://www.x.org/wiki/NewModuleGuidelines. + + Acked-by: Matthieu Herrb + Signed-off-by: Gaetan Nadon + +commit a647aff5124674b638ef52152a5c16c27466eed7 +Author: Chris Wilson +Date: Thu Feb 23 12:04:09 2012 +0000 + + sna/gen3: Silence the compiler complaining with DBG enabled + + Signed-off-by: Chris Wilson + +commit cd3a618f583a546bafbe0c171a267774adc4d72b +Author: Chris Wilson +Date: Thu Feb 23 10:40:57 2012 +0000 + + sna/gen4 Refactor get_rectangles() to re-emit state after a flush + + Condense the work performed by each caller into the callee. + + Signed-off-by: Chris Wilson + +commit 6a3fa4d1b6849b666a9232b017ce82329494621b +Author: Chris Wilson +Date: Thu Feb 23 10:40:57 2012 +0000 + + sna/gen7 Refactor get_rectangles() to re-emit state after a flush + + Condense the work performed by each caller into the callee. + + Signed-off-by: Chris Wilson + +commit fe914eaca4b9178ab3d14053a703772f93295895 +Author: Chris Wilson +Date: Thu Feb 23 10:40:57 2012 +0000 + + sna/gen5 Refactor get_rectangles() to re-emit state after a flush + + Signed-off-by: Chris Wilson + +commit 4ecf882c838c1f044b4ed3add486b6579ea2c431 +Author: Chris Wilson +Date: Thu Feb 23 10:40:57 2012 +0000 + + sna/gen6: Refactor get_rectangles() to re-emit state after a flush + + Signed-off-by: Chris Wilson + +commit dfa21713c27eb9135cb5e1745807324e49422fde +Author: Chris Wilson +Date: Thu Feb 23 10:29:38 2012 +0000 + + sna/gen3: Refactor get_rectangles() to emit composite state and retry + + As gen3 only uses the single state emission block, and uniformly calls + get_rectangles(), we can move that caller protocol into the callee. + + Signed-off-by: Chris Wilson + +commit a48e6e0db970ad07cd7452ba24c362d0c2fcf1bf +Author: Chris Wilson +Date: Thu Feb 23 10:17:34 2012 +0000 + + sna/gen3+: Force a batch flush when run out of CA vbo + + As we prematurely end the batch if we bail on extending the vbo for CA + glyphs, we need to force the flush. + + Signed-off-by: Chris Wilson + +commit 57c19b10db2b512c52a593fad98b5ac5db4f1497 +Author: Chris Wilson +Date: Thu Feb 23 00:33:16 2012 +0000 + + sna: Use a CPU mapping if the bo is already in the CPU domain + + The heuristic of using the mapping only before the first use in an + execbuffer was suboptimal and broken by the change in bo initialisation. + + Signed-off-by: Chris Wilson + +commit 510767e213c2f44563f5c438ad1234113567be90 +Author: Chris Wilson +Date: Wed Feb 22 18:33:09 2012 +0000 + + sna/gen4: Fix vertex flushing across batch flushing + + Due to the w/a for its buggy shaders, gen4 is significantly different + that backporting the simple patch from gen5 was prone to failure. We + need to check that the vertices have not already been flushed prior to + flushing again. + + Signed-off-by: Chris Wilson + +commit f6392048e3e761b35644268ef161045524cfa369 +Author: Chris Wilson +Date: Wed Feb 22 17:00:38 2012 +0000 + + sna/blt: Avoid clobbering the composite state if we fail to setup the BLT + + Signed-off-by: Chris Wilson + +commit 4e86da64be947fe4b8b5f285d26d200827847a8c +Author: Chris Wilson +Date: Wed Feb 22 14:36:35 2012 +0000 + + sna/gen3+: Flush the vertices during vertex-finish + + But only when finishing the vbo, which is the tricky part of the recent + CA glyph bugs. + + Signed-off-by: Chris Wilson + +commit 71512b2438e06b2bd256aff3657797152fbef38e +Author: Chris Wilson +Date: Wed Feb 22 13:44:24 2012 +0000 + + sna: Clear the flush flag on release of scanout/dri + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46445 + Signed-off-by: Chris Wilson + +commit 025d3d46dc28e967b4f42e5748d13c7fb3ad283b +Author: Chris Wilson +Date: Wed Feb 22 13:17:01 2012 +0000 + + sna/trapezoids: Only the inplace PictOpIn is unbounded + + Signed-off-by: Chris Wilson + +commit b02f866d67d60538368619849f2acda4c1706476 +Author: Chris Wilson +Date: Wed Feb 22 09:15:25 2012 +0000 + + sna: Ensure we restore the shadow pixels before uploading CPU data + + Reported-by: Joe Nahmias + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46425 + Signed-off-by: Chris Wilson + +commit be5df7b5ab487a1282c96dda92f3799e35cd19af +Author: Chris Wilson +Date: Tue Feb 21 23:27:33 2012 +0000 + + sna/gen5: Remove CA glyph workaround + + The root cause has been found and destroyed, so the w/a is now + redundant. + + Signed-off-by: Chris Wilson + +commit 6038cede83e7f360428b4625d288411794f9d052 +Author: Chris Wilson +Date: Tue Feb 21 21:26:29 2012 +0000 + + sna/gen3+: Re-emit composite state after flushing CA vertices + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42891 + Signed-off-by: Chris Wilson + +commit fe6602cbbc4eed1b88ac731a30b46cc970ea444f +Author: Chris Wilson +Date: Tue Feb 21 21:26:29 2012 +0000 + + sna/gen3+: Only flush the vertices after checking for end-of-batch + + Or upon actually closing the vertex buffer. + + However, the underlying issue remains. That is we are failing to re-emit + the first-pass for CA text after flushing the vertex buffer (and so + emitting the second-pass for the flushed vertices). + + Reported-by: lemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=42891 + Signed-off-by: Chris Wilson + +commit 168c87a340119e65b1d7ccbbf59da820044ca936 +Author: Chris Wilson +Date: Tue Feb 21 13:16:43 2012 +0000 + + sna: Clear the scanout flag after releasing the scanout pixmap + + In the future, this will be a good place to restore the cache level of + the bo as well. + + Signed-off-by: Chris Wilson + +commit d7415742a5f78958489216f450411603b1eff9a7 +Author: Chris Wilson +Date: Tue Feb 21 16:33:26 2012 +0000 + + sna/dri: Queue a flush on the back DRI2 when enqueing a flip + + As we may wait upon the bo having finished rendering before we can + execute the flip, flushing the render cache as early as possible is + beneficial + + Signed-off-by: Chris Wilson + +commit 2715a455f7bfbecd7a6977184dc6180a09d06e1f +Author: Chris Wilson +Date: Tue Feb 21 14:49:30 2012 +0000 + + uxa: Prevent laggy applications by throttling after rendering + + Before blocking and waiting for further input, we need to make sure that + we have not developed too large a queue of outstanding rendering. As we + rendering to the front-buffer with no natural throttling and allow X + clients to render as fast as they wish, it is entirely possible for a + large queue of outstanding rendering to develop. For such an example, + watch firefox rendering the fishietank demo and notice the delay that + can build up before the tooltips appear. + + Signed-off-by: Chris Wilson + +commit 26721893cb41cef66db7ef626881d1eba8a5bdea +Author: Chris Wilson +Date: Tue Feb 21 13:31:16 2012 +0000 + + sna: Mark the pixmap as active for the force-to-gpu short-circuit + + Signed-off-by: Chris Wilson + +commit 1541f1afca028453379083e564bc82debf0ba39a +Author: Chris Wilson +Date: Tue Feb 21 13:17:35 2012 +0000 + + sna: Skip the CPU synchronization when marking a pixmap as inactive + + Signed-off-by: Chris Wilson + +commit 74fd55a96bd6c63e9c49a4b7fee7ef91f6b00a2c +Author: Chris Wilson +Date: Tue Feb 21 13:11:32 2012 +0000 + + sna/dri: Ensure that we reattach to the DRI2 front buffer after modeswitch + + If we change the Screen pixmap due to a change of mode, we lose the + flag that we've attached a DRI2 buffer to it. So the next time we try to + copy from/to it, reassert its DRI2 status. + + Signed-off-by: Chris Wilson + +commit d051793b9194060f5408503b1fac56958c6e58e4 +Author: Chris Wilson +Date: Tue Feb 21 11:42:31 2012 +0000 + + sna/dri: Improve error handling of failing to create a DRI2 pixmap + + Signed-off-by: Chris Wilson + +commit 580ae520cad749fb86a1bddd0fa2bcadfd60abb6 +Author: Chris Wilson +Date: Tue Feb 21 10:55:46 2012 +0000 + + sna: Short-circuit repeated calls to force-to-gpu + + Signed-off-by: Chris Wilson + +commit f2aafb98026b5c476b7f84aa2dc4c1f9ba2e573d +Author: Chris Wilson +Date: Tue Feb 21 10:43:11 2012 +0000 + + uxa: Silence compiler warning for const arguments + + i965_video.c: In function 'gen6_create_cc_state': + i965_video.c:1374:12: warning: passing argument 4 of + 'intel_bo_alloc_for_data' discards 'const' qualifier from pointer target + type [enabled by default] + + Repeated ad nauseam. + + Signed-off-by: Chris Wilson + +commit 507f72d6d44963cae5d8d4b9da68165f73c6fd36 +Author: Chris Wilson +Date: Tue Feb 21 10:39:48 2012 +0000 + + uxa: Remove DPRINTF stubs + + It wasn't being used for anything non-trivial and was throwing compiler + warnings, so remove it. + + Signed-off-by: Chris Wilson + +commit c72a67390ea243bf43e2ee4efe237ab88a4615b7 +Author: Chris Wilson +Date: Tue Feb 21 10:21:56 2012 +0000 + + sna/dri: Update for AsyncSwap interface changes + + We now need to return TRUE/FALSE depending on whether we need to + invalidate the drawable. + + Signed-off-by: Chris Wilson + +commit 27bc2acf0e6a0e5e071e0d187bdf71577e821af8 +Author: Chris Wilson +Date: Tue Feb 21 09:29:41 2012 +0000 + + sna: Fix use of RegionInit() for singular regions + + For a singular region, we want to use a value for nboxes of 0 not 1, + fortunately if you pass in a box, it ignores the value of nboxes. + RegionInit() is a most peculiar API! + + Signed-off-by: Chris Wilson + +commit d98b41ce4323b43d2359349a04a4a56559e341a2 +Author: Zhigang Gong +Date: Fri Feb 17 19:50:52 2012 +0800 + + uxa/glamor/dri: Should fixup the drawable pixmap. + + Two fixes in this commit, first we only need to check the + front left buffer, for other attachment we don't need to + check them. The second is, we should fixup the pixmap's + drawable not the original drawable. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit 1e0d702c3a77f6db3dfd55b8cafc5fca4d778751 +Author: Zhigang Gong +Date: Fri Feb 17 19:50:51 2012 +0800 + + uxa/glamor/dri: Enable the pageflip support on glamor. + + To support easy buffer exchange at glamor layer, glamor + added a new API glamor_egl_exchange_buffers() to exchange + two pixmaps' EGL image and fbos and textures without + recreating any of them. But this simple method's requirement + is that there are two pixmaps. A exceptional case is: + If we are using triple buffer when do page flipping, we + will have an extra back_buffer which doesn't have a pixmap + attached to it. Then each time we set that buffer to a + pixmap, we will have to call the create_egl_textured_pixmap + to create the corresponding EGL image and fbo and texture + for it. This is not efficient. + + To fix this issue, this commit introduces a new back_pixmap + to intel structure to hold the back buffer and corresponding + glamor resources. Then we will just need to do the light + weight buffer exchanging at both DDX and glamor layer. + + As the new back pixmap is similar to the screen pixmap + and need to be handled carefully when close screen. As the + glamor data structure is a per screen data, and will be + released at its close screen method. The glamor's close + screen method must cleanup the screen pixmap and back + pixmap's glamor resources. screen pixmap is easy to get, + but there is no good way to store the back pixmap. + + So the glamor add a new API glamor_egl_create_textured_screen_ext + function to pass the back pixmap's pointer to glamor layer. + + This commit make us depend on glamor commit: 4e58c4f. + And we increased the required glamor version from 0.3.0 to 0.3.1 + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit ce7a57994d662f340b9457a2750e4385e7d669cd +Author: Zhigang Gong +Date: Fri Feb 17 19:50:50 2012 +0800 + + uxa/dri: Refine the pageflip processing. + + Add a new element back_name to intel structure to track + the back bo's name then avoid flink every time. + And at function I830DRI2ExchangeBuffers, after finish + the BO exchange between info's front and back pixmap, + it set the new front bo to the screen pixmap. But the + screen pixmap should be the same as front's pixmap, + so this is a duplicate operation and can be removed. + + Signed-off-by: Zhigang Gong + +commit 1a65e2b8a2ebfb4d736efb7631515babad75faf2 +Author: Chris Wilson +Date: Tue Feb 21 08:09:52 2012 +0000 + + sna: Split up/down edge walking in order to handle endpoint clipping + + In order to prevent walking upwards off the top of the pixmap when + rendering a clipped vertical edge, we need to tweak the boundary + conditions for the vertical edge walker. + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=46261 + Signed-off-by: Chris Wilson + +commit 7ea44997553ffdf57b346dc9d83742c511c9e5a4 +Author: Chris Wilson +Date: Mon Feb 20 23:50:42 2012 +0000 + + sna: Restore the shadow pixels when reducing CPU damage to all + + Reported-by: Joe Nahmias + References: https://bugs.freedesktop.org/show_bug.cgi?id=46346 + Signed-off-by: Chris Wilson + +commit dbe0580e207ad85cb6a659f86c5746a7ecbcd036 +Author: Chris Wilson +Date: Mon Feb 20 16:30:53 2012 +0000 + + sna: gen4+ suffer no penalty for changing tiling + + On gen4, the tiling/fence constraints are fairly lax, only requiring + page alignment of the object and its size, and so we can switch + tiling modes without incurring a GPU stall on active bo. + + Signed-off-by: Chris Wilson + +commit b68b76cf54a322e80685f1ec93538cd6c5813ea4 +Author: Chris Wilson +Date: Mon Feb 20 13:38:11 2012 +0000 + + sna: Move sync'ing of CPU bo after allocation to first write + + The idea was that we could afford to allocate an active CPU bo for + copying to from using the GPU and later sync just before we need to + write to the shadow pixels. Having the sync inside the allocation + function potentially causes an unwanted stall. + + Signed-off-by: Chris Wilson + +commit bbb6794a3b97b1fcf72c8712ab0ec591683b128b +Author: Chris Wilson +Date: Mon Feb 20 12:25:31 2012 +0000 + + sna: Trim clipped lines to end within bounds + + References: https://bugs.freedesktop.org/show_bug.cgi?id=46261 + References: https://bugs.freedesktop.org/show_bug.cgi?id=45673 + Signed-off-by: Chris Wilson + +commit 805bc3310cd0a13eab8e48e7615bdd42638cfa33 +Author: Chris Wilson +Date: Mon Feb 20 12:09:19 2012 +0000 + + sna: When reversing line-drawing direction, use the clipped endpoint + + Make sure we take the clipping into account if we choose to reverse the + draw direction (to maintain left-to-right inside the box emission). + + References: https://bugs.freedesktop.org/show_bug.cgi?id=46261 + References: https://bugs.freedesktop.org/show_bug.cgi?id=45673 + Signed-off-by: Chris Wilson + +commit 7f0a4a5f7224003a0cd226137de5a068949a41b4 +Author: Chris Wilson +Date: Mon Feb 20 09:52:37 2012 +0000 + + sna/dri: Ensure the domain tracking is reset when releasing bo used for swaps + + Signed-off-by: Chris Wilson + +commit 7d147c7462ba183f5316e7e8dafeca62add6f97c +Author: Chris Wilson +Date: Sun Feb 19 17:50:56 2012 +0000 + + sna: Correct tile sizes for Y-tiling on i915g + + 128-byte Y-tiling wasn't introduced until the 945. + + Signed-off-by: Chris Wilson + +commit 95391b7312147760d8da01fce68b8398aa8e4e2f +Author: Chris Wilson +Date: Thu Feb 16 22:01:41 2012 +0000 + + sna/trapezoids: Presume that Precise mono rasterisation adheres to the spec + + References: https://bugs.freedesktop.org/show_bug.cgi?id=46156 + Signed-off-by: Chris Wilson + +commit 52b11f63d7922032caef0f0a5979b080dbddcbfc +Author: Chris Wilson +Date: Thu Feb 16 11:22:23 2012 +0000 + + sna: Upconvert fallback trapezoids to a8 + + Since the hardware only handles a8 without tricky emulation and pixman + insists on using a1 for sharp trapezoids we need to ensure that we + convert the a1 to a8 for our trapezoidal mask. + + More worryingly, this path should never be hit... + + References: https://bugs.freedesktop.org/show_bug.cgi?id=46156 + Signed-off-by: Chris Wilson + +commit 8050ced6204f5aca12e6c57f86308b6ad1b98209 +Author: Chris Wilson +Date: Wed Feb 15 17:01:18 2012 +0000 + + sna/dri: Mark bo as reusable after completion of a flip-event + + After the flip chain is completed, any residual buffers are no longer in + use and so available for reuse. + + Signed-off-by: Chris Wilson + +commit fc046aabde76142fce130773d78d797d7d750ab7 +Author: Chris Wilson +Date: Wed Feb 15 16:08:23 2012 +0000 + + sna/dri: Don't attempt to change tiling if it is a no-op + + Signed-off-by: Chris Wilson + +commit 66cc9c69657ac2703f2c7fc3c2c50f06bf5daa99 +Author: Chris Wilson +Date: Wed Feb 15 11:58:42 2012 +0000 + + Be paranoid about the definition of container_of + + Replace any existing definition with a correct version, since there are + broken container_of macros floating around the xorg includes. + + Signed-off-by: Chris Wilson + +commit c0376b7f7b083ab2e87edc36e56fd8eb99c3cd05 +Author: Chris Wilson +Date: Mon Feb 13 00:48:15 2012 +0000 + + Add a missing macro for old xorg/list.h + + list_last_entry() needs to be defined if we are including the xorg + list.h as opposed to our standalone variant. + + Signed-off-by: Chris Wilson + +commit 87bed52180cd2abd80ef6b58384f9fd9c9968f7b +Author: Chris Wilson +Date: Sat Feb 11 20:54:18 2012 +0000 + + Include a local copy of list.h + + In 1.11.903, the list.h was renamed to xorg-list.h with a corresponding + change to all structures. As we carried local fixes to list.h and + extended functionality, just create our own list.h with a bit of + handwaving to protect us for the brief existence of xorg/include/list.h. + + Reported-by: Armin K + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45938 + Signed-off-by: Chris Wilson + +commit c64ebee5fdccf313cbd3c73850e02e6fa7dd2a65 +Author: Chris Wilson +Date: Sat Feb 11 13:31:12 2012 +0000 + + sna/gen6: Prefer the render ring for copies + + Slower for fills, but on the current stack faster for copies, both large + and small. Hopefully, when we write some good shaders for SNB, we will + not only improve performance for copies but also make fills faster on + the render ring than the blt? + + As the BLT copy routine is GPU bound for copywinpix10, and the RENDER + copy routine is CPU bound and faster, I believe that we have reached the + potential of the BLT ring and not yet saturated the GPU using the render + copy. + + Note that we still do not casually switch rings, so the actual routine + chosen will still be selected by the preceeding operations, so is + unlikely to have any effect in practice during, for example, cairo-traces. + + Signed-off-by: Chris Wilson + +commit 6a9b50177408c919ed5c6c2463f687476af2c698 +Author: Chris Wilson +Date: Sat Feb 11 11:02:53 2012 +0000 + + sna/gen6: Suppress the CS stall for the first command in the batch + + The batch emission serves as a full stall, so we do not need to incur a + second before our first rendering. + + Signed-off-by: Chris Wilson + +commit cbe8bed83f0b4097958c4541ad7809a05e6c6f43 +Author: Chris Wilson +Date: Sat Feb 11 10:58:05 2012 +0000 + + sna/gen7: Mention the depth-stall required before changing VS state + + Because one day we may actually start using VS! Copied from the addition + of the w/a to Mesa by Kenneth Graunke. + + Signed-off-by: Chris Wilson + +commit 6193f2f00fa7205f9d736340318c66d116dca53e +Author: Chris Wilson +Date: Thu Feb 9 14:16:17 2012 +0000 + + sna: Fix retire after readback + + Upon reading, we encounter a serialisation point and so can retire all + requests. However, kgem_bo_retire() wasn't correctly detecting that + barrier and so we continued to using GPU detiling thinking the target + was still busy. + + Signed-off-by: Chris Wilson + +commit 4d8369f8e60fd4f5a0ef49f3e9866ea5ecb21927 +Author: Chris Wilson +Date: Wed Feb 8 13:15:46 2012 +0000 + + sna/gen2+: Force upload rather than perform source transformations on the CPU + + If both the source and destination is on the CPU, then the thinking was + it would be quicker to operate on those on the CPU rather than copy both + to the GPU and then perform the operation. This turns out to be a false + assumption if transformation is involved -- something to be reconsidered + if pixman should ever be improved. + + Signed-off-by: Chris Wilson + +commit 8634d461bd9e5a3d3f75b0efc11db87b8d3e1245 +Author: Chris Wilson +Date: Wed Feb 8 09:13:27 2012 +0000 + + sna: Limit max CPU bo size to prevent aperture thrashing on upload + + Copying between two objects that consume more than the available GATT + space is a painful experience due to the forced use of an intermediatory + and eviction on every batch. The tiled upload paths are in comparison + remarkably efficient, so favour their use when handling extremely large + buffers. + + This reverses the previous idea in that we now prefer large GPU bo + rather than large CPU bo, as the render pipeline is far more flexible + for handling those than the blitter is for handling the CPU bo (at least + for gen4+). + + Signed-off-by: Chris Wilson + +commit 5b16972d7850b2347efc084311d664e14263cba1 +Author: Chris Wilson +Date: Tue Feb 7 23:45:37 2012 +0000 + + sna: Check that we successfully retired an active linear buffer + + If we go to the trouble of running retire before searching, we may as + well check that we retired something before proceeding to check all the + inactive lists. + + Signed-off-by: Chris Wilson + +commit 207b4d4482a6af4a39472ec20ff04fa0c9322d73 +Author: Chris Wilson +Date: Tue Feb 7 21:56:29 2012 +0000 + + sna: Relax must-be-blittable rules for gen4+ + + The render pipeline is actually more flexible than the blitter for + dealing with large surfaces and so the BLT is no longer the limiting + factor on gen4+. + + Signed-off-by: Chris Wilson + +commit 13c960db9ef876ee99991d97dfc34fef184c0341 +Author: Zhigang Gong +Date: Thu Feb 2 11:30:57 2012 +0800 + + uxa/glamor: Use a macro to specify module name. + + This depends upon glamor commit b5f8d, just after the 0.3.0 tag. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit 70092bfbc51ddc5a51c9cae21c6b2852c216a6fc +Author: Zhigang Gong +Date: Wed Feb 1 19:47:28 2012 +0800 + + uxa/glamor: Refine CloseScreen and InitScreen process. + + The previous version calls glamor_egl_close_screen and + glamor_egl_free_screen manually which is not align with + standard process. Now glamor change the way to follow + standard method: + + glamor layer and glamor egl layer both have their internal + CloseScreens. The correct sequence is after the I830CloseScreen + is registered, then register glamor_egl_close_screen and + the last one is glamor_close_screen. So we move out the + intel_glamor_init from the intel_uxa_init to I830ScreenInit + and just after the registration of I830CloseScreen. + + As the glamor interfaces changed, we need to check the + glamor version when load the glamor egl module to make + sure we are loading the right glamor module. If + failed, it will switch back to UXA path. + + This depends upon glamor commit 1bc8bf tagged with version 0.3.0. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit 798aad6c95a1a95fd587430dc7a6d59497a10ce1 +Author: Chris Wilson +Date: Tue Feb 7 20:16:48 2012 +0000 + + sna/gen[4-7]: Fix erroneous scale factor for partial large bo render copies + + Signed-off-by: Chris Wilson + +commit ea6588726107f1ab0ef5a8f69d420b5bff819a76 +Author: Chris Wilson +Date: Tue Feb 7 15:26:50 2012 +0000 + + sna: Apply offsets correctly for partial src/dst in large copy boxes + + Signed-off-by: Chris Wilson + +commit 14c91e108464a305fb23b3313b842bfaeb9420fc +Author: Chris Wilson +Date: Tue Feb 7 15:25:48 2012 +0000 + + sna/tiling: Request Y-tiles if we know we cannot BLT to either the src or dst + + Signed-off-by: Chris Wilson + +commit 3131217e3ecbdf6cd40b044bd31e8228ff5c6bff +Author: Chris Wilson +Date: Tue Feb 7 14:35:59 2012 +0000 + + sna: Mark up the temporary allocations + + Signed-off-by: Chris Wilson + +commit ec1ccb6bf6a984cbe3317e636d7ff73887348a46 +Author: Chris Wilson +Date: Tue Feb 7 13:37:52 2012 +0000 + + sna: Set the damage for render->copy_boxes to NULL before use + + Signed-off-by: Chris Wilson + +commit 58f634b792c6d109c5f2374a3e24d759e744abb4 +Author: Chris Wilson +Date: Tue Feb 7 13:32:20 2012 +0000 + + sna: Handle tile alignment for untiled large bo more carefully + + We ended up trying to align the upper bound to zero as the integer + divsion of the tile width by pixel was zero. + + Signed-off-by: Chris Wilson + +commit bf3518ea910a2a3c5b4500dcba7c829576fbfd47 +Author: Zhigang Gong +Date: Tue Feb 7 09:40:54 2012 +0800 + + uxa/glamor/dri: Fix a typo bug when fixup glamor pixmap. + + Should modify the old pixmap's header not the new one which + was already destroyed. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit 1467a4ba1a327877026cc76b3eabeb51d1415509 +Author: Chris Wilson +Date: Mon Feb 6 20:41:53 2012 +0000 + + sna: Use the proper sna_picture_is_solid() test + + Rather than the specialised routines that assumed pDrawable was + non-NULL, which was no longer true after f30be6f743. + + Signed-off-by: Chris Wilson + +commit ef335a65a9d9f7eb96873201b546c25fd03d090c +Author: Chris Wilson +Date: Mon Feb 6 20:37:54 2012 +0000 + + sna: Search all active buckets for a temporary allocation + + Reduce the need for creating a new object if we only need the allocation + for a single operation. + + Signed-off-by: Chris Wilson + +commit b7e3aaf773f05ce82405e135c0f99b40b3c2f434 +Author: Chris Wilson +Date: Mon Feb 6 18:08:19 2012 +0000 + + sna: Use the clipped end-point for recomputing segment length after clipping + + References: https://bugs.freedesktop.org/show_bug.cgi?id=45673 + Signed-off-by: Chris Wilson + +commit f30be6f74392f5687ffe8bc9dd2c6dc024ae06c8 +Author: Chris Wilson +Date: Mon Feb 6 15:59:21 2012 +0000 + + sna/gen2+: Exclude solids from being classed as requiring an upload + + We treat any pixmap that is not attached to either a CPU or GPU bo as + requiring the pixel data to be uploaded to the GPU before we can + composite. Normally this is true, except for the solid cache. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=45672 + Signed-off-by: Chris Wilson + +commit f009386de87acccadb1803567e4c494e5e80a2a9 +Author: Chris Wilson +Date: Mon Feb 6 09:50:03 2012 +0000 + + sna: If we have a CPU bo, do not assert we have shadow pixels + + When transferring damage to the GPU, on SNB it is not necessarily true + that we have a shadow pixmap, we may instead have drawn onto an unmapped + CPU bo and now simply need to copy from that bo onto the GPU. Move the + assertion onto the path where it truly matters. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45672 + Signed-off-by: Chris Wilson + +commit 22e452ebe01c32a08599411743cf18f9ad0545a7 +Author: Chris Wilson +Date: Mon Feb 6 09:19:56 2012 +0000 + + sna: Disable use of xvmc for SNB+ + + Not yet implemented, so don't bother setting it to fail. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44874 + Signed-off-by: Chris Wilson + +commit a8ed1a02ada1f8d2f910dfefb150d26c840bf9ea +Author: Chris Wilson +Date: Sat Feb 4 20:13:07 2012 +0000 + + sna: Discard the redundant clear of the unbounded area if already clear + + Signed-off-by: Chris Wilson + +commit b899a4b69696141ca8b897a7abf52649b09f7b3b +Author: Chris Wilson +Date: Sat Feb 4 20:07:49 2012 +0000 + + sna: Always pass the clear colour for PictOpClear + + Having made that optimisation for Composite, and then made the + assumption that it is always true in the backends, we failed to clear + the unbounded area outside of a trapezoid since we passed in the + original colour and the operation was optimised as a continuation. + + Signed-off-by: Chris Wilson + +commit c107b90a44abb45c837ff8924939872be5b490eb +Author: Chris Wilson +Date: Sat Feb 4 16:33:34 2012 +0000 + + sna/gen6: Reduce PictOpClear to PictOpSrc (with blending disabled) + + The advantage of PictOpSrc is that it writes its results directly to + memory bypassing the blend unit. + + Signed-off-by: Chris Wilson + +commit 4baa2806bc0f51e7576b769ca6750deb3821c4d3 +Author: Chris Wilson +Date: Sat Feb 4 12:06:22 2012 +0000 + + sna: Check if the damage reduces to all before performing the migration + + An assert exposed a situation where we had accumulated an unreduced + damage-all and so we were taking the slow path only to discover later + that it was a damage-all and that we had performed needless checks. + + Signed-off-by: Chris Wilson + +commit 2653524dffc1fe0dbff7d74bfc9be535d9ececb1 +Author: Chris Wilson +Date: Fri Feb 3 20:06:43 2012 +0000 + + sna: Reduce the downsample tile size to accommodate alignment + + If we need to enlarge the sampled tile due to tiling alignments, the + resulting sample can become larger than we can accommodate through the 3D + pipeline, resulting in FAIL. + + Signed-off-by: Chris Wilson + +commit 93a0b10f163ee79b6a6a7ea46b0a33b622b1f86e +Author: Chris Wilson +Date: Fri Feb 3 19:30:24 2012 +0000 + + sna: Apply redirection for the render copy into large pixmaps + + If the pixmap is larger than the pipeline, but the operation extents fit + within the pipeline, we may be able to create a proxy target to + transform the operation into one that fits within the constraints of the + render pipeline. + + This fixes the infinite recursion hit with partially displayed extremely + large images. + + Signed-off-by: Chris Wilson + +commit 4774c6b8331831e0c9f3b24f5f6e1b6ea399f628 +Author: Chris Wilson +Date: Thu Feb 2 15:23:03 2012 +0000 + + sna: Add a couple of sanity checks that the CPU drawable is on the CPU + + Signed-off-by: Chris Wilson + +commit 418cd98db7c4a2886c9e310f3691eb6c77421dd7 +Author: Chris Wilson +Date: Wed Feb 1 19:10:41 2012 +0000 + + sna/gen6: Ring switching outweighs the benefits for cairo-traces + + At the moment, the jury is still out on whether freely switching rings + for fills is a Good Idea. So make it easier to turn it on and off for + testing. + + Signed-off-by: Chris Wilson + +commit 2d0e7c7ecd7371ac7b5fe3f382fc5d04792f7019 +Author: Chris Wilson +Date: Wed Feb 1 14:52:56 2012 +0000 + + sna: Search again for a just-large-enough mapping for inplace uploads + + Signed-off-by: Chris Wilson + +commit 55c7088f54655609fbb00106679a566b46ee8dba +Author: Chris Wilson +Date: Wed Feb 1 01:33:52 2012 +0000 + + sna: Add debugging code to verify damage extents of fallback paths + + After using the CPU, upload the damage and read back the pixels from the + GPU bo and verify that the two are equivalent. + + Signed-off-by: Chris Wilson + +commit c8fc2cde53ef7aa011ec7c47e7fc5486de0651f5 +Author: Chris Wilson +Date: Wed Feb 1 01:27:43 2012 +0000 + + sna: Fill extents for ImageGlyphs + + The spec says to fill the characters boxes, which is what the hardware + does. The implementation fills the extents instead. rxvt expects the + former, emacs the latter. Overdraw is a nuisance, but less than leaving + glyphs behind... + + Reported-by: walch.martin@web.de + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45438 + Signed-off-by: Chris Wilson + +commit 13508ab5ea136caca90c846ff1026c0c1acd2ad5 +Author: Chris Wilson +Date: Tue Jan 31 22:38:46 2012 +0000 + + sna: PolyGlyph supports all of fill/tile/stipple rules + + The hw routines only directly supports solid fill so fallback for the + interesting cases. An alternative would be to investigate using the + miPolyGlyph routine to convert the weird fills into spans in order to + fallback. Sounds cheaper to fallback, so wait for an actual use case. + + Signed-off-by: Chris Wilson + +commit df4e1059a4e09998334dde6aa1c8ccfe76e442c0 +Author: Chris Wilson +Date: Tue Jan 31 19:19:13 2012 +0000 + + sna/gen6: Prefer to do fills using the BLT + + Using the BLT is substantially faster than the current shaders for solid + fill. The downside is that it invokes more ring switching. + + Signed-off-by: Chris Wilson + +commit 8b012de0a1af4ec97c3197af3f1efdcc67bc2118 +Author: Chris Wilson +Date: Tue Jan 31 20:29:58 2012 +0000 + + sna/gen5: Always prefer to emit solid fills using the BLT + + As the BLT is far, far faster than using a shader. + + Improves cairo-demos/chart from 6 to 13 fps. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 0a748fc49d60dc2bc9494f95c4934592b111831a +Author: Chris Wilson +Date: Tue Jan 31 10:51:02 2012 +0000 + + sna: Split the tiling limits between upload and copying + + The kernel has a bug that prevents pwriting buffers large than the + aperture. Whilst waiting for the fix, limit the upload where possible to + fit within that constraint. + + Signed-off-by: Chris Wilson + +commit 9c1f8a768ca1f762c722f63bab2747e4ff1fd773 +Author: Chris Wilson +Date: Tue Jan 31 10:29:02 2012 +0000 + + sna: Avoid converting requested Y to X tiling for large pitches on gen4+ + + The only strong requirement is that to utilize large pitches, the object + must be tiled. Having it as X tiling is a pure convenience to facilitate + use of the blitter. A DRI client may want to keep using Y tiling + instead. + + Signed-off-by: Chris Wilson + +commit e872c1011fc7b67683703fd891234f07dd7acd04 +Author: Chris Wilson +Date: Tue Jan 31 10:21:05 2012 +0000 + + sna/dri: We need to reduce tiling on older gen if we cannot fence + + Only apply the architectural limits to enable bo creation for DRI buffers. + + Reported-by: Alban Browaeys + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45414 + Signed-off-by: Chris Wilson + +commit a4caf67d8da37d04f8915d96b10411ba7267937e +Author: Chris Wilson +Date: Tue Jan 31 00:35:42 2012 +0000 + + sna: Trim tile sizes to fit into bo cache + + Signed-off-by: Chris Wilson + +commit 3f7c1646c78d8854c88b214d3699e51839ba9711 +Author: Chris Wilson +Date: Tue Jan 31 00:09:42 2012 +0000 + + sna: Check that the intermediate IO buffer can also be used for blitting + + Signed-off-by: Chris Wilson + +commit e504fab6c5354ae9d18ccefb10bd586fa49b924c +Author: Chris Wilson +Date: Mon Jan 30 23:49:18 2012 +0000 + + sna: Discard the cleared GPU buffer upon PutImage to the CPU buffer + + Signed-off-by: Chris Wilson + +commit ed1c1a7468d78e99cb4f9a4a8b8a6b00c3257a75 +Author: Chris Wilson +Date: Mon Jan 30 13:43:59 2012 +0000 + + sna: Track large objects and limit prefer-gpu hint to small objects + + As the GATT is irrespective of actual RAM size, we need to be careful + not to be too generous when allocating GPU bo and their shadows. So + first of all we limit default render targets to those small enough to + fit comfortably in RAM alongside others, and secondly we try to only + keep a single copy of large objects in memory. + + Signed-off-by: Chris Wilson + +commit d53d93ffa6e133f46c39595294ecf8e2182b5a68 +Author: Chris Wilson +Date: Mon Jan 30 15:11:34 2012 +0000 + + sna: Update the partial buffer allocation size when reusing an old mapping + + Whilst the old mapping is guaranteed to be larger than the requested + allocation size, keep track of the actual size allows for better packing + of future buffers. And the code also performs a sanity check that the + buffer is the size we claim it to be... + + Signed-off-by: Chris Wilson + +commit 6f99555b6b64a0e1baad1853569f7bf521c327c3 +Author: Chris Wilson +Date: Mon Jan 30 11:48:59 2012 +0000 + + sna: Allow the creation of render targets larger than the maximum bo cache + + Given that we now handle uploads to and from bo that are larger than the + aperture and that usage of such large bo is rare and so unlikely to + benefit from caching, allow them to be created as render targets and + destroy as soon as they become inactive. + + In principle, this finally enables GPU acceleration of ocitysmap on gen4+, + but due to the large cost of creating and destroying large bo it is + disabled on systems that require clflushing. It is, however, a + pre-requisite for exploiting the enhanced capabilities of IvyBridge. + + Signed-off-by: Chris Wilson + +commit c65ec096e79aa6bda7b2b3ef235e3fd9698b4da7 +Author: Chris Wilson +Date: Mon Jan 30 11:41:07 2012 +0000 + + sna: Decrease tiling step size in case we need to enlarge the box later + + We can juggle rendering into large bo on gen4 by redirecting the + rendering through a proxy that is tile aligned, and so the render target + may be slightly larger than the tiling step size. As that is then larger + than the maximum 3D pipeline, the trick fails and we need to resort to a + temporary render target with copies in and out. In this case, check that + the tile is aligned to the most pessimistic tiling width and reduce the + step size to accomodate the enlargement. + + Signed-off-by: Chris Wilson + +commit 95f3734dd69b82e007095a599cc21f4c63d6ec00 +Author: Chris Wilson +Date: Mon Jan 30 11:40:02 2012 +0000 + + sna: Allow creation of proxies to proxies + + Just update the offset of the new bo by the offset of the existing + proxy. + + Signed-off-by: Chris Wilson + +commit 488937edb67a60389380b405f8f8a548f51e64c7 +Author: Chris Wilson +Date: Mon Jan 30 11:38:36 2012 +0000 + + sna: Base prefer-gpu hint on default tiling choice + + As on gen4+, tiling increases the maximum usable pitch we can + accommodate wider pixmaps on the GPU. + + Signed-off-by: Chris Wilson + +commit ca252e5b51d7b2f5a7b2c2e0d8fdb024b08096db +Author: Chris Wilson +Date: Sun Jan 29 19:36:55 2012 +0000 + + sna: Detect batch overflow and fallback rather an risk an ENOSPC + + Having noticed that eog was failing to perform a 8k x 8k copy with + compiz running on a 965gm, it was time the checks for batch overflow + were implemented. + + Signed-off-by: Chris Wilson + +commit 3aee521bf236994628c4d103a2b8f391a4be2aa7 +Author: Chris Wilson +Date: Sun Jan 29 19:21:54 2012 +0000 + + sna: Add a tiled fallback for large BLT copies + + If we are attempting to copy between two large bo, larger than we can + fit into the aperture, break the copy into smaller steps and use an + intermediatory. + + Signed-off-by: Chris Wilson + +commit df148c962108a7f3efead0b80ab4fe77f3f79c8b +Author: Chris Wilson +Date: Sun Jan 29 18:07:14 2012 +0000 + + sna: Limit the tile size for uploading into large pixmaps + + As we may have a constrained aperture, we need to be careful not to + exceed our resources limits when uploading the pixel data. (For example, + fitting two of the maximum bo into a single batch may fail due to + fragmentation of the GATT.) So be cautious and use more tiles to reduce + the size of each individual batch. + + Signed-off-by: Chris Wilson + +commit e1e67e8f394480eb4fef1238ccfd49cc36e4b6f2 +Author: Chris Wilson +Date: Sun Jan 29 15:43:42 2012 +0000 + + sna: Fix the "trivial" fix to improve error handling + + The logic was just backwards and we tried to upload a shadowless GPU + pixmap. + + Signed-off-by: Chris Wilson + +commit d3fb1e1e89ccf5cefe6add66de4f960ef07cac60 +Author: Chris Wilson +Date: Sun Jan 29 14:20:33 2012 +0000 + + sna: Handle GPU creation failure when uploading subtexture + + Signed-off-by: Chris Wilson + +commit 518a99ea34b26aa094f29a4cc1ea5419f63a0e56 +Author: Chris Wilson +Date: Sun Jan 29 14:09:46 2012 +0000 + + sna: Always create a GPU bo for copying from an existent source GPU bo + + Make sure we prevent the readback of an active source GPU bo by always + prefering to do the copy on the GPU if the data is already resisent. + This fixes the second regression from e583af9cc, (sna: Experiment with + creating large objects as CPU bo). + + Signed-off-by: Chris Wilson + +commit 624d9843abda9ca6bd1b004d70a6fdc082ba9653 +Author: Chris Wilson +Date: Sun Jan 29 13:55:20 2012 +0000 + + sna: Ignore map status and pick the first inactive bo for reuse + + This fixes the performance regression introduced with e583af9cca, + (sna: Experiment with creating large objects as CPU bo), as we ended up + creating fresh bo and incurring setup and thrashing overhead, when we + already had plenty cached. + + Signed-off-by: Chris Wilson + +commit 5c6255ba2f12f04938fd586ca02562ee3cae05af +Author: Chris Wilson +Date: Sun Jan 29 11:02:38 2012 +0000 + + sna: Determine whether to use a partial proxy based on the pitch + + On gen4+ devices the maximum render pitch is much larger than is simply + required for the maximum coordinates. This makes it possible to use + proxy textures as a subimage into the oversized texture without having + to blit into a temporary copy for virtually every single bo we use. + + Signed-off-by: Chris Wilson + +commit 65466f86263b3788b438fe021a12ade371190b01 +Author: Chris Wilson +Date: Sat Jan 28 01:54:47 2012 +0000 + + sna: Allow ridiculously large bo, up to half the total GATT + + Such large bo place extreme stress on the system, for example trying to + mmap a 1GiB into the CPU domain currently fails due to a kernel bug. :( + So if you can avoid the swap thrashing during the upload, the ddx can now + handle 16k x 16k images on gen4+ on the GPU. That is fine until you want + two such images... + + The real complication comes in uploading (and downloading) from such + large textures as they are too large for a single operation with + automatic detiling via either the BLT or the RENDER ring. We could do + manual tiling/switching or, as this patch does, tile the transfer in + chunks small enough to fit into either pipeline. + + Signed-off-by: Chris Wilson + +commit 03211f4b0b7e32b6d7dc28e60be72db204b8c8d4 +Author: Chris Wilson +Date: Fri Jan 27 23:18:05 2012 +0000 + + sna: Guard against the upload buffer growing past the maximum bo size + + Signed-off-by: Chris Wilson + +commit 2afd49a28429cdeb36583cfc31cc9b1742c1fb83 +Author: Chris Wilson +Date: Fri Jan 27 22:18:30 2012 +0000 + + sna: Limit inplace upload buffers to maximum mappable size + + References: https://bugs.freedesktop.org/show_bug.cgi?id=45323 + Signed-off-by: Chris Wilson + +commit 8f4bae01e39392faa8978090db4cbe28fa00b013 +Author: Chris Wilson +Date: Fri Jan 27 20:28:44 2012 +0000 + + sna/video: Ensure the video pixmap is on the GPU + + The presumption that the pixmap is the scanout and so will always be + pinned is false if there is a shadow or under a compositor. In those + cases, the pixmap may be idle and so the GPU bo reaped. This was + compounded by that the video path did not mark the pixmap as busy. So + whilst watching a video under xfce4 with compositing enabled (has to be + a non-GL compositor) the video would suddenly stall. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45279 + Signed-off-by: Chris Wilson + +commit d02bd80b2f9f8ee3840be5d8d6b8d389192c57f5 +Author: Chris Wilson +Date: Fri Jan 27 20:12:49 2012 +0000 + + sna: Use a proxy rather than a temporary bo for too-tall but thin targets + + If the render target is thin enough to fit within the 3D pipeline, but is + too tall, we can fudge the address of the origin and coordinates to fit + within the constaints of the pipeline. + + Signed-off-by: Chris Wilson + +commit ea433995a37f0a9d1579f74029418f22a63a2bc0 +Author: Chris Wilson +Date: Fri Jan 27 19:34:39 2012 +0000 + + sna: Experiment with a partial source + + If the source is thin enough such that the pitch is within the sampler's + constraints and the sample size is small enough, just fudge the origin + of the bo such that it can be sampled. + + This avoids having to create a temporary bo and use the BLT to extract + it and helps, for example, firefox-asteroids which uses an 64x11200 + texture atlas. + + Signed-off-by: Chris Wilson + +commit ad910949beb0c42e2d7b864f030b055ca40adacd +Author: Chris Wilson +Date: Fri Jan 27 18:37:39 2012 +0000 + + sna: Mark diagonal lines as partial write + + Signed-off-by: Chris Wilson + +commit b9c83e0b2c42f7657b1854a7cdcbc0407957c382 +Author: Chris Wilson +Date: Fri Jan 27 18:24:01 2012 +0000 + + sna/video: Add some DBG messages to track the error paths + + References: https://bugs.freedesktop.org/show_bug.cgi?id=45279 + Signed-off-by: Chris Wilson + +commit 45d831c8b11d6f9f38c0cb9b5877541a971f2c67 +Author: Chris Wilson +Date: Fri Jan 27 15:45:17 2012 +0000 + + sna: Consolidate routines to choice destination bo + + Combine the two very similar routines that decided if we should render + into the GPU bo, CPU bo or shadow pixmap into a single function. + + Signed-off-by: Chris Wilson + +commit 6402e7f1195f60f96dc269a701532c3270d8920f +Author: Chris Wilson +Date: Fri Jan 27 18:05:51 2012 +0000 + + sna: Ensure that we have a source bo for tiled fills + + Signed-off-by: Chris Wilson + +commit 6c5fb84f4de346b06e5a538e683c5a118f2579bc +Author: Chris Wilson +Date: Fri Jan 27 14:08:57 2012 +0000 + + sna/glyphs: Check that we attached to the cache pixmaps upon creation + + If the hw is wedged, then the pixmap creation routines will return an + ordinary unattached pixmap. The code presumed that it would only return + a pixmap with an attached bo, and so would segfault as it chased the + invalid pointer after a GPU hang and the server was restarted. + Considering that we already checked that the GPU wasn't wedged before we + started, this is just mild paranoia, but on a run-once piece of code. + + Signed-off-by: Chris Wilson + +commit 86f1ae9164a94323c08e1dc6cb301e5bc1126b10 +Author: Chris Wilson +Date: Fri Jan 27 10:26:11 2012 +0000 + + sna/video: Add some more DBG breadcrumbs to the textured PutImage + + Signed-off-by: Chris Wilson + +commit ce1cae7f4715fc8e14327c5b705d9f2cc45a3741 +Author: Chris Wilson +Date: Fri Jan 27 00:37:51 2012 +0000 + + sna/video: Simplify the gen2/915gm check + + And make the later check in put image match. + + Signed-off-by: Chris Wilson + +commit 541908524f9ee754db3bc45d2e1681d34479c1cc +Author: Chris Wilson +Date: Thu Jan 26 23:14:14 2012 +0000 + + sna: Remove extraneous clipping from GetImage + + The spec says that they must wholly contained with the valid BorderClip + for a Window or within the Pixmap or else a BadMatch is thrown. Rely on + this behaviour and not perform the clipping ourselves. + + Signed-off-by: Chris Wilson + +commit 7ff40b572ec5cd860d7c7ff23beca0388f37c31c +Author: Chris Wilson +Date: Thu Jan 26 22:55:04 2012 +0000 + + sna: Avoid fbBlt for the easy GetImage cases + + From (i5-2520m): + 60000 trep @ 0.6145 msec ( 1630.0/sec): GetImage 500x500 square + To: + 60000 trep @ 0.4949 msec ( 2020.0/sec): GetImage 500x500 square + + Signed-off-by: Chris Wilson + +commit adb1320bba15a3a3b4fa8e7d0fd0360fa696721d +Author: Chris Wilson +Date: Thu Jan 26 16:05:48 2012 +0000 + + sna/gen2+: Include being unattached in the list of source fallbacks + + If the source is not attached to a buffer (be it a GPU bo or a CPU bo), + a temporary upload buffer would be required and so it is not worth + forcing the target to the destination in that case (should the target + not be on the GPU already). + + Signed-off-by: Chris Wilson + +commit b1f9415bf355e9fbd6fc3ce8fa1af59083ca2943 +Author: Chris Wilson +Date: Thu Jan 26 13:59:24 2012 +0000 + + sna: Allow gen4+ to use larger GPU bo + + As the blitter on gen4+ does not require fence registers, it is not + restricted to operating on large objects within the mappable aperture. + As we do not need to operate on such large GPU bo in place, we can relax + the restriction on the maximum bo size for gen4+ to allocate for use + with the GPU. + + Signed-off-by: Chris Wilson + +commit d35b6955dbb5d652d8685d2c1ea82c5e08de55ea +Author: Chris Wilson +Date: Thu Jan 26 14:34:36 2012 +0000 + + sna: Prevent mapping through the GTT for large bo + + If the bo is larger than a quarter of the aperture, it is unlikely that + we will be able to evict enough contiguous space in the GATT to + accommodate that buffer. So don't attempt to map them and use the + indirect access instead. + + Signed-off-by: Chris Wilson + +commit 7c81bcd0c425cc0f7ddf2ad8289bb739c8d44289 +Author: Chris Wilson +Date: Thu Jan 26 13:35:15 2012 +0000 + + sna: Add FORCE_FALLBACK debugging hook for PutImage + + Signed-off-by: Chris Wilson + +commit 35c0ef586bf508c577642d772f18eae0b64cfd44 +Author: Chris Wilson +Date: Thu Jan 26 11:20:03 2012 +0000 + + sna/gen3: Use cpu bo if already in use + + Signed-off-by: Chris Wilson + +commit b76a6da3fa0148ef32600dd9505e22b90de037df +Author: Chris Wilson +Date: Thu Jan 26 10:47:01 2012 +0000 + + sna: Search the buckets above the desired size in the bo cache + + It is preferrable to reuse a slightly larger bo, than it is to create a + fresh one and map it into the aperture. So search the bucket above us as + well. + + Signed-off-by: Chris Wilson + +commit e2b8b1c145932e2254a705905c60f18c200cf2e8 +Author: Chris Wilson +Date: Thu Jan 26 12:42:12 2012 +0000 + + sna: Apply any previous transformation when downsampling + + In order to handle rotations and fractional offsets produced by the act + of downsampling, we need to compute the full affine transformation and + apply it to the vertices rather than attempt to fudge it with an integer + offset. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=45086 + Signed-off-by: Chris Wilson + +commit 352828ee59164a9e81093d88dfdd45bc21f0c739 +Author: Chris Wilson +Date: Thu Jan 26 12:41:34 2012 +0000 + + sna: Tweak aperture thresholds for batch flushing + + In order to more easily accommodate operations on large source CPU bo. + + Signed-off-by: Chris Wilson + +commit cff6a1a2e4648eb211a1789ae9f711e2f16e9d4d +Author: Chris Wilson +Date: Wed Jan 25 23:21:36 2012 +0000 + + sna: Use the cpu bo where possible as the source for texture extraction + + Signed-off-by: Chris Wilson + +commit e583af9cca4ad2e5643317447c6b065d3ee7d11e +Author: Chris Wilson +Date: Wed Jan 25 23:04:50 2012 +0000 + + sna: Experiment with creating large objects as CPU bo + + Even on non-LLC systems if we can prevent the migration of such + objects, we can still benefit immensely from being able to map them into + the GTT as required. + + Signed-off-by: Chris Wilson + +commit 55569272f7d4232ef50f7b964dda82f85a190b99 +Author: Chris Wilson +Date: Wed Jan 25 20:13:27 2012 +0000 + + sna: Apply the same migration flags for the dst alphamap as for the dst pixmap + + Signed-off-by: Chris Wilson + +commit 4a132ddbf06e5ffc364c25002a1e46ad8bf0e45a +Author: Chris Wilson +Date: Wed Jan 25 20:12:55 2012 +0000 + + sna: Correct offset for moving drawable regions to the CPU + + Signed-off-by: Chris Wilson + +commit 65164d90b7b17ec7eea1e24d4b02ec037b55b1ff +Author: Chris Wilson +Date: Wed Jan 25 20:12:27 2012 +0000 + + sna/gen2+: Do not force use of GPU if the target is simply cleared + + Signed-off-by: Chris Wilson + +commit 307f493d76580687a3cf56106bf296475f1f53e5 +Author: Chris Wilson +Date: Wed Jan 25 20:11:21 2012 +0000 + + sna: Map freshly created, unbound bo through the CPU + + Take advantage that we know we will have to clflush the unbound bo + before use by the GPU and populate it inplace. + + Signed-off-by: Chris Wilson + +commit d785bb7df054a1f15d59db69b089deb743bbdb40 +Author: Chris Wilson +Date: Wed Jan 25 16:45:43 2012 +0000 + + sna: GetImage is allowed to read a window's border + + We need to adjust the clip to include the border pixels when migrating + damage from the backing pixmap. This also requires relaxing the + constraint that a read must be within the drawable. + + Signed-off-by: Chris Wilson + +commit 36425ba49ecbd87b1e3bf4340ca2496d8de24a7f +Author: Chris Wilson +Date: Wed Jan 25 12:49:24 2012 +0000 + + sna: Round up buffer allocations when downsampling + + The pathological case being nx1 or 1xm resulting in an illegal allocation + request of 0 bytes. + + One such example is + wolframalpha.com: x = (200 + x) / 100 + which generates an approximately 8500x1 image and so needs downscaling + to fit in the render pipeline on all but IvyBridge. Bring on Ivy! + + Signed-off-by: Chris Wilson + +commit a2e83c6dcba1e911f42a3004b3d0782049e243e2 +Author: Chris Wilson +Date: Wed Jan 25 11:22:38 2012 +0000 + + sna: Silence compiler warning for a potential uninitialised return on error + + sna_accel.c: In function 'sna_copy_plane': + sna_accel.c:5022:21: warning: 'ret' may be used uninitialized in this + function [-Wuninitialized] + + Signed-off-by: Chris Wilson + +commit 8d22a76506133e0f76424159c0944d29bdf39da9 +Author: Chris Wilson +Date: Wed Jan 25 09:36:20 2012 +0000 + + sna: Run the miHandleExposures for no-op CopyPlane + + Signed-off-by: Chris Wilson + +commit 338941eda3c7591a85b83000eafae0407d0d7cd0 +Author: Chris Wilson +Date: Wed Jan 25 02:42:25 2012 +0000 + + sna: Handle self-copies for CopyPlane + + Prepare the source first as this has the dual benefit of letting us + decide how best to proceed with the op (on the CPU or GPU) and prevents + modification of the damage after we have choosen our preferred path. + + Signed-off-by: Chris Wilson + +commit 2e8b398ca383f5292adab8b351b8837dde3e131a +Author: Chris Wilson +Date: Wed Jan 25 01:42:56 2012 +0000 + + sna: Only shrink partial buffers that are being written to + + Ignore inactive and mmapped buffers. + + Signed-off-by: Chris Wilson + +commit b79252efaafe2ebc998d6cf6176a425dd897e66f +Author: Chris Wilson +Date: Wed Jan 25 01:36:27 2012 +0000 + + sna: Apply source clipping to sna_copy_plane() + + Ensure that the migration region is within bounds for both the source + and destination pixmaps. + + Signed-off-by: Chris Wilson + +commit 46252bc7bcc7e08e47d00cdc87d6c1ed93830fcc +Author: Chris Wilson +Date: Wed Jan 25 01:31:34 2012 +0000 + + sna: Set the source clip for CopyArea fallback correctly + + The source window is (src->x, src->y)x(src->width, src->height) in + pixmap space. However, we then need to use this to clip against the + desination region, and so we need to translate from the source + coordinate to the destination coordinate. + + Signed-off-by: Chris Wilson + +commit ae6d3a311783d7e063de0347363331f14bd74d74 +Author: Chris Wilson +Date: Wed Jan 25 01:18:11 2012 +0000 + + sna: Print source and destination regions for CopyArea fallback for DBG + + Signed-off-by: Chris Wilson + +commit dd5e90adfc73870cebcb215ad9fb9b5aedd38673 +Author: Chris Wilson +Date: Wed Jan 25 01:17:49 2012 +0000 + + sna: Clip GetImage to drawable so that damage migration is within bounds + + Signed-off-by: Chris Wilson + +commit b1fba5e8534da7fe253e21a3501854c04d82a108 +Author: Chris Wilson +Date: Wed Jan 25 01:16:34 2012 +0000 + + sna: Clear GPU damage first when moving a clear pixmap to the CPU + + This allows us to discard any busy GPU or CPU bo when we know we are + going to clear the shadow pixmap afterwards. + + Signed-off-by: Chris Wilson + +commit 5ad95d66665802bce25e127ae0d06f3e0a9b0e62 +Author: Chris Wilson +Date: Tue Jan 24 22:11:20 2012 +0000 + + sna: Reduce number of reads required to inspect timers + + By using the information provided by select at wakeup. + + Signed-off-by: Chris Wilson + +commit aae19cbc5d0ddcf247451d06e063b2550a7ff16f +Author: Chris Wilson +Date: Tue Jan 24 19:58:29 2012 +0000 + + sna: Only reset devPrivate.ptr if owned by the CPU bo when freeing + + If the pixmap is mapped to the GPU bo, we should continue to use the + current mapping rather than revoke it. Otherwise if we write to the GPU + bo inplace, thereby discarding the CPU bo, we set the pointer we are + about to copy to, to NULL. + + Signed-off-by: Chris Wilson + +commit 5312ee90ad80eda1c6ff72fbef60f77f03094972 +Author: Chris Wilson +Date: Tue Jan 24 19:02:56 2012 +0000 + + sna: mark the pixmap as no longer clear after rendering video + + Signed-off-by: Chris Wilson + +commit 69d3fc91f4a397f704b9971f97a905626e86eb3c +Author: Chris Wilson +Date: Tue Jan 24 18:51:32 2012 +0000 + + sna: Set up GC for general FillArc to FillSpans callback + + Signed-off-by: Chris Wilson + +commit 855c45c65a69d34ad32a97a5fc54dd09d40d3e26 +Author: Chris Wilson +Date: Tue Jan 24 18:48:17 2012 +0000 + + sna: Enable clipping for mi FillSpans gpu callback + + The mi routines do not ensure that their output is suitably constrained + to the clip extents, so we must run it through the clipper. + + Signed-off-by: Chris Wilson + +commit c3fe42cde70a06a9a9a6190934df5cddb41d2f5f +Author: Chris Wilson +Date: Tue Jan 24 18:36:08 2012 +0000 + + sna: Don't attempt to create pixmaps for dpeths smaller than 8 + + Signed-off-by: Chris Wilson + +commit 22bab3cd7d0b2bcedfdd86f198d1ed9a21dd82aa +Author: Chris Wilson +Date: Tue Jan 24 18:33:14 2012 +0000 + + sna: Handle malloc failures when downsampling + + Signed-off-by: Chris Wilson + +commit 4aef9e6f50cb96c57b7ba345a18e55c97d788192 +Author: Chris Wilson +Date: Tue Jan 24 17:23:43 2012 +0000 + + sna: Add more damage-is-contained asserts + + Signed-off-by: Chris Wilson + +commit 16462e551d575bd5a370a8ac8b450ba72fea7d47 +Author: Chris Wilson +Date: Tue Jan 24 17:47:22 2012 +0000 + + sna: Install CPU handler for PolyLine for miPolySegment callback + + Signed-off-by: Chris Wilson + +commit b8b49ae70b3aadf4423bd6830c446c040f87a2f1 +Author: Chris Wilson +Date: Tue Jan 24 16:32:40 2012 +0000 + + sna: Mutate a temporary copy of the GC->ops so we don't alter new GCs + + In order to avoid using the wrong function for a scratch GC created + during the course of a MI function whilst we have a specialised GC in + use, we need to avoid modifying the original function table. + + Signed-off-by: Chris Wilson + +commit 1a116a15a5d978a1edf413a439f6ef6d3205a7aa +Author: Chris Wilson +Date: Tue Jan 24 16:53:21 2012 +0000 + + sna: Reduce the assertion that we would have hinted to operate inplace + + As the drawable_gc_flags() operate on lower level information than the + hint, it is able to spot more oportunities to reduce the READ flags and + so the assertion was overly optimistic. + + Signed-off-by: Chris Wilson + +commit 3d1bba033bc29fdf498dc082f3542c520a5ed39a +Author: Chris Wilson +Date: Tue Jan 24 18:22:12 2012 +0000 + + sna/gen3: Apply damage to video pixmap + + Reported-by: Paul Neumann + References: https://bugs.freedesktop.org/show_bug.cgi?id=44504 + Signed-off-by: Chris Wilson + +commit ff4b8a03a40f7eb1d71b96aebb5daa1d8df83d2a +Author: Chris Wilson +Date: Tue Jan 24 17:51:35 2012 +0000 + + sna: Use RepeatPad to avoid sampling the border color when downsampling + + References: https://bugs.freedesktop.org/show_bug.cgi?id=45086 + Signed-off-by: Chris Wilson + +commit 09bddddaf94b848f417e1c9449cfe4b21d2554dd +Author: Chris Wilson +Date: Tue Jan 24 15:50:02 2012 +0000 + + sna: handle negative modulus for tiled blits + + Signed-off-by: Chris Wilson + +commit f3b11ebc28114062581c39089781114323946654 +Author: Chris Wilson +Date: Tue Jan 24 16:05:09 2012 +0000 + + sna: Add more assertions for copy errors + + Signed-off-by: Chris Wilson + +commit b56971986d2d495aa38f015beb659fb12f0d433a +Author: Chris Wilson +Date: Tue Jan 24 17:23:59 2012 +0000 + + sna: Trim the clipped Segment to the right length + + Signed-off-by: Chris Wilson + +commit 358a0861e642c26d925a69656039b4c95adba237 +Author: Chris Wilson +Date: Tue Jan 24 13:30:19 2012 +0000 + + sna: Do not discard CPU damage for a partial copy + + If we are copying a region that does not fill its extents (i.e. is not + singular) then we must be care not to discard the CPU damage that is not + overwritten by the copy. + + Fixes regression from 77ee92248582d65a03619d1bb1d93a74468eea00 + (sna: Use full usage flags for moving the dst pixmap for a copy). + + Signed-off-by: Chris Wilson + +commit 672c6ad8170572c0f2562d5a8381ab2d17fd1e1b +Author: Chris Wilson +Date: Tue Jan 24 12:56:59 2012 +0000 + + sna: Silence the compiler with a few DBG format warnings + + The size of the integers being printed changed causing warnings on 32/64 + bit. + + Signed-off-by: Chris Wilson + +commit 238f3d9bc563950475ee823f844197cf15a909e2 +Author: Chris Wilson +Date: Tue Jan 24 12:19:38 2012 +0000 + + sna: A deferred attachment will never have a CPU bo + + So we can remove that check in sna_copy_boxes. + + Signed-off-by: Chris Wilson + +commit c353a8cfde838b070f3e71d3946f3b40d1d5113a +Author: Chris Wilson +Date: Tue Jan 24 10:52:27 2012 +0000 + + sna: Revise use of the inplace hint to favour small cacheable operations + + The goal of the heuristic is to reduce readbacks and damage tracking on + active GPU bo whilst simultaneously offering the best performance for + small operations which would prefer to be performed on the shadow rather + than in place. + + This restores ShmPutImage performance. + + Signed-off-by: Chris Wilson + +commit 29547421f392a9b589ba069cbfbba01dbe535d93 +Author: Chris Wilson +Date: Tue Jan 24 10:23:46 2012 +0000 + + sna: Use the reduced ROP from the fbGC to accurately determine readback + + Signed-off-by: Chris Wilson + +commit ec794f7594ae5e2c223b7f7255ff8979d9fb06c1 +Author: Chris Wilson +Date: Mon Jan 23 22:14:15 2012 +0000 + + sna: Track a proxy's dirty status upon itself rather than the target + + As proxy's are short-lived and are not used outside of the operation for + which they are created, dirtied or flushed, we can safely copy the dirty + status onto the proxy object itself. + + Signed-off-by: Chris Wilson + +commit 2574a04c940e032fdcf1cd39a0950515e8652471 +Author: Chris Wilson +Date: Mon Jan 23 21:45:29 2012 +0000 + + sna: Split the active bo cache into per-tiling caches + + Signed-off-by: Chris Wilson + +commit 566cbf1ef53b1f970289fcd5b3b389a74beb7e78 +Author: Chris Wilson +Date: Mon Jan 23 21:15:10 2012 +0000 + + sna: Abort search for a linear bo if we encounter a purged buffer + + Given the rarity of encountering a purged buffer versus the frequency of + scanning the list and the then likely result of allocation a new buffer, + simply abort the search on the first purged bo. + + Signed-off-by: Chris Wilson + +commit b8d3353624be51f2b618467c899a9ce3cbf3cbfe +Author: Chris Wilson +Date: Mon Jan 23 19:13:22 2012 +0000 + + sna: Refactor tests for a solid gc to use the new function + + This way all paths can test to see if they might be able to reduce the + tiled fill or the opaque fill into a solid fill. + + Signed-off-by: Chris Wilson + +commit 78238b3a37c1c8a152bd3920e73aa6034c0f663f +Author: Chris Wilson +Date: Mon Jan 23 18:00:05 2012 +0000 + + sna: Prefer mi span filling functions to call through to the GPU + + Having removed the double analysis for the fast paths, at least, the + span filling code on the GPU is now faster than doing the same + operations in cache memory for the majority of cases. So allow the + driver to prefer to use those functions when it has a GPU bo. + + Signed-off-by: Chris Wilson + +commit c5c77d04d79666962fd7c2d86bc6e7aef716084b +Author: Chris Wilson +Date: Mon Jan 23 18:24:21 2012 +0000 + + sna: Reduce GC to solid if possible along general spans path + + Again, we should no longer be hitting this code if at all possible, but + for completeness... + + Signed-off-by: Chris Wilson + +commit 03611f662db854dc3b14f32c0315bf45bc415bbf +Author: Chris Wilson +Date: Mon Jan 23 19:59:06 2012 +0000 + + sna: Guard against being passed n==0 to FillSpans + + Apparently this does happen, notably by miFillPolyArc. + + Signed-off-by: Chris Wilson + +commit 7ac13a4d5aca1627b3a5fc9e7261d5dfafba970b +Author: Chris Wilson +Date: Tue Jan 24 00:21:12 2012 +0000 + + sna: Provide a fast path for miZeroLine for PolySegment + + Signed-off-by: Chris Wilson + +commit e7817a2206bd0b1cc4e4458686c328f7b41ea32c +Author: Chris Wilson +Date: Mon Jan 23 17:43:55 2012 +0000 + + sna: Override sna_fill_spans for PolySegment + + Signed-off-by: Chris Wilson + +commit 5b8db54d0fa9eab2610feed6947e917f2e400e1a +Author: Chris Wilson +Date: Tue Jan 24 00:21:12 2012 +0000 + + sna: Provide a fast path for miZeroLine for PolyLine + + Signed-off-by: Chris Wilson + +commit 280a9165db5382b93ab449158106bdd5aa7b2329 +Author: Chris Wilson +Date: Mon Jan 23 17:43:55 2012 +0000 + + sna: Override sna_fill_spans for PolyLine + + Signed-off-by: Chris Wilson + +commit 72fc3122b85fe1a1a16c7f7401c300089273fd88 +Author: Chris Wilson +Date: Tue Jan 24 01:27:08 2012 +0000 + + sna: Prefer to always use span generation for PolyArc + + Signed-off-by: Chris Wilson + +commit 98879e3786b7f6241378a32a10f2d46eb01baf85 +Author: Chris Wilson +Date: Mon Jan 23 23:22:00 2012 +0000 + + sna: Specialise PolyPoint for callback from miZeroPolyArc + + miZeroPolyArc may use either FillSpans for PolyPoint to generate its + curves, so also provide custom point filling routines. + + Signed-off-by: Chris Wilson + +commit 5b10cb4a5ce84bd677b0a67a17d8674defb19f31 +Author: Chris Wilson +Date: Mon Jan 23 17:02:46 2012 +0000 + + sna: Override sna_fill_spans for PolyArc + + This is the missing like that allows the GPU to outperform fbPolyArc. + + Signed-off-by: Chris Wilson + +commit 6390a44a69d7f13a3ba16e8b48c640dc39dd227f +Author: Chris Wilson +Date: Mon Jan 23 15:57:53 2012 +0000 + + sna: Pass the reduce clip region to sna_fill_spans__cpu + + Since we compute it for the pixmap migration, we may as well use to + perform the clipping within FillSpans as well. + + Signed-off-by: Chris Wilson + +commit 40e3745debe9738362661c7d7f498f3489c28876 +Author: Chris Wilson +Date: Mon Jan 23 15:42:18 2012 +0000 + + sna: Wrap gc->ops->PolyFillArc + + The goal is to avoid the overhead of performing multiple region analysis + when calling sna_fill_spans by doing it once at the top level and then + choose the most appropriate drawing method. + + Signed-off-by: Chris Wilson + +commit 55c2211143b3be2827fd4e299c3c211f3bd7935b +Author: Chris Wilson +Date: Mon Jan 23 18:15:36 2012 +0000 + + sna: Use a streamlined sna_fill_spans for when we know we want to use the gpu + + Signed-off-by: Chris Wilson + +commit b20ae331566e92f1a995f49fd0760f020db25035 +Author: Chris Wilson +Date: Mon Jan 23 19:49:18 2012 +0000 + + sna: Switch to using spans based on use_wide_spans() + + This just gives us a hook with which to conveniently enable or disable + the new code. + + Signed-off-by: Chris Wilson + +commit 41739ff9517ca158d9f7b7ac82e5bacef62a3d68 +Author: Chris Wilson +Date: Mon Jan 23 15:42:18 2012 +0000 + + sna: Wrap gc->ops->FillPolygon + + The goal is to avoid the overhead of performing multiple region analysis + when calling sna_fill_spans by doing it once at the top level and then + choose the most appropriate drawing method. + + Signed-off-by: Chris Wilson + +commit aef56b194d4de9bd71ab71e3d93d81e1750262c5 +Author: Chris Wilson +Date: Mon Jan 23 15:38:30 2012 +0000 + + sna: Mark GPU bo as busy when drawing to an all-damaged pixmap for core + + The fast path to decide whether to use the GPU bo for the core drawaing + operations forgot to update the active status of the pixmap. This + included forgetting to clear the is-cleared flag. + + Signed-off-by: Chris Wilson + +commit c67e6a05ff729c0ddb26775e1c8533be1144d85a +Author: Chris Wilson +Date: Mon Jan 23 11:40:13 2012 +0000 + + sna: Align the origin of downsampling subregion to an even pixel + + In order for us to produce stable downsampled images across multiple + frames, we need to sample the same pairs of pixels every time. This + requires us to align the origin of the sample region to an even pixel. + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=45086 + Signed-off-by: Chris Wilson + +commit 9267da93969d1727cb95956c3f63643f0039c60d +Author: Chris Wilson +Date: Mon Jan 23 11:20:12 2012 +0000 + + sna: Apply composite offset to copy-clear GPU path + + Signed-off-by: Chris Wilson + +commit 803f6558c665c16ba2d20415e778b5bd1d308c2f +Author: Chris Wilson +Date: Mon Jan 23 11:05:50 2012 +0000 + + sna: Only subtract the fillrect from the CPU damage if it covers the drawable + + The idea behind that optimisation is for the inactive pixmap to be + refreshed and allowed to be transfered back to the GPU when it is + entirely redrawn. As such performing the subtraction when it does not + completely remove it only incurs additional overhead. + + Signed-off-by: Chris Wilson + +commit 267493f39137704bd52df65b7605be30d2a062b2 +Author: Chris Wilson +Date: Mon Jan 23 10:54:13 2012 +0000 + + sna: Assert that the subtract operation does reduce an all-damaged + + Somewhere somewhen it appears that I am discarding the all-damaged flag + on the pointer. The only possibility I can see is for a no-op + subtraction, so put an assert there just in case the impossible is + happening. + + Signed-off-by: Chris Wilson + +commit 2908fe2df7b8f870a55fc5856f94ea541a7c7b75 +Author: Chris Wilson +Date: Sun Jan 22 18:46:57 2012 +0000 + + sna: Remove assertion that all flushing list members are in the GPU domain + + This may not be true for external buffers that are put on the flushing + list because they have foreign requests pending. + + Signed-off-by: Chris Wilson + +commit a0bc17c0fa34c9f9243817d1674d1ff235dc99d6 +Author: Chris Wilson +Date: Sun Jan 22 18:27:34 2012 +0000 + + sna/gen6: stall before blending dirty pixels from the render cache + + Another restriction on the render pipeline, it turns out, is that before + the blend unit can read back the dst pixels in a subsequent primitive, + we must stall the pipeline for the completion of that earlier primitive. + + This is demonstrated by cacomposite. + + Signed-off-by: Chris Wilson + +commit 5aa494305e90eed5df211427741a75380add8e96 +Author: Chris Wilson +Date: Sun Jan 22 16:10:39 2012 +0000 + + sna: Correct the offsets for performing partial downsampling on the GPU + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=45086 + Signed-off-by: Chris Wilson + +commit a7b24bb4342eefb2b23fa40d7c7216c38f2edc09 +Author: Chris Wilson +Date: Sun Jan 22 15:50:47 2012 +0000 + + sna: Correct image buffer size when uploading a downsampled image + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=45086 + Signed-off-by: Chris Wilson + +commit 238fc67aa945d5669eccd2a8fe8e98402b9a6223 +Author: Chris Wilson +Date: Sun Jan 22 16:04:13 2012 +0000 + + sna: Incude prefer-gpu hint in decision to upload CPU textures + + Signed-off-by: Chris Wilson + +commit aeaffb102190a8846c6341e72a4338b41639d679 +Author: Chris Wilson +Date: Sun Jan 22 15:52:41 2012 +0000 + + sna: Add some more DBG along the downsampling source extraction path + + Signed-off-by: Chris Wilson + +commit 92badc9c9c2636284af8bc56b098d24ff222f167 +Author: Chris Wilson +Date: Sun Jan 22 12:41:31 2012 +0000 + + sna: Avoid a common readback after clearing + + It is surprisingly common for a pixmap to be created, cleared and then + used as an upload target or, even worse, as a source for a ShmGetImage. + In order to prevent this folly, we can trivially track when we clear an + entire pixmap and its GPU bo and avoid the readback in such cases. + + Signed-off-by: Chris Wilson + +commit 67a166d1247a1197fc851308c33c4970868f6a21 +Author: Chris Wilson +Date: Sun Jan 22 13:46:05 2012 +0000 + + sna: Pass inplace hint for sna_copy_boxes fallback + + In the unlikely event that this makes a difference, provide the hint as + to when we do not read back from the destination and so a streaming copy + would be preferable. + + Signed-off-by: Chris Wilson + +commit 77ee92248582d65a03619d1bb1d93a74468eea00 +Author: Chris Wilson +Date: Sun Jan 22 13:42:57 2012 +0000 + + sna: Use full usage flags for moving the dst pixmap for a copy + + Now that the migration code can decide for itself when to not move + damage, we can pass the hints to the code rather than perform the + optimisation in sna_copy_boxes. + + Signed-off-by: Chris Wilson + +commit dd079dd1f64e7832c6343c24958aa9eeb2f58789 +Author: Chris Wilson +Date: Sat Jan 21 19:38:40 2012 +0000 + + sna: Check the blt composite op is within the source bounds + + If we attempt to read from a drawable that is partially off its backing + pixmap (such as a partially offscreen composite window) we need to fixup + the read from the out-of-bounds regions to return clear. Since we don't, + the easier answer is to just to switch to the render pipeline for such + an operation. + + Signed-off-by: Chris Wilson + +commit 8a91c7d85740a5adc25d2a9b1972c367780ce714 +Author: Chris Wilson +Date: Sat Jan 21 01:18:17 2012 +0000 + + sna: Give kgem_create_buffer_2d a unique id + + The gen3, among others, backend uses the unique id of a buffer to track + the currently attached buffer and uses 0 as the invalid value. Linear + buffers as created by kgem_create_buffer_2d were not being assigned a + unique id causing mayhem when they were then being passed to the + backends as render targets and sources. In particular, gen3 did not + notice the switch in render target and did not emit commands to change + the GPU target nor attach the buffer to the batch, causing the + sna_read_boxes to fail and for us to trigger an assertion for an + uncomsumed read buffer. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42718 + Signed-off-by: Chris Wilson + +commit d21e80433f2574fe96036ad1d563515406a1946f +Author: Chris Wilson +Date: Sat Jan 21 01:17:39 2012 +0000 + + sna/gen3: Add DBG markup for tracking target state + + In particular for when we switch to a new destination and mark it dirty. + + Signed-off-by: Chris Wilson + +commit 20006a9ae7f993f02c45ccbc1e414d74bfee3acd +Author: Chris Wilson +Date: Fri Jan 20 22:17:44 2012 +0000 + + sna: Cleanup PolyText and ImageText fallback debugging + + Signed-off-by: Chris Wilson + +commit 3fbd7cafb4394e0641565dc794b82bef615b4aac +Author: Chris Wilson +Date: Fri Jan 20 22:16:53 2012 +0000 + + sna: Copy the glyphs metrics before checking for an empty glyph + + The empty glyph still needs the correct advance, and copying it too late + left it as zero and so we were collapsing spaces in PolyText8 and + friends. + + Signed-off-by: Chris Wilson + +commit f0d8f5d377460bb7da82546e8304252312e97147 +Author: Chris Wilson +Date: Fri Jan 20 14:34:28 2012 +0000 + + sna/gen3: Set bo to NULL for render_fill_one + + It had to happen, I missed one! From fc9531fc2df. + + Signed-off-by: Chris Wilson + +commit 0286ddbd67d3b2585ffa3deccb7eeb674cd7a3e0 +Author: Chris Wilson +Date: Fri Jan 20 11:33:05 2012 +0000 + + sna/gen6: Cleanup non-pipelined w/a + + Move the workaround CS stall into the emit drawrect which is the only + non-pipelined op we emit. This removes the split between deciding + whether we will emit a drawrect and actual emission. + + Signed-off-by: Chris Wilson + +commit a0c4024e32ccab70e7f7893896d30c80ad9f4240 +Author: Chris Wilson +Date: Fri Jan 20 09:42:18 2012 +0000 + + sna/gen6: Do not enable blending on video sources + + Signed-off-by: Chris Wilson + +commit bbbda4c408c2576927582097f7cd4f606b1761fa +Author: Chris Wilson +Date: Fri Jan 20 09:40:04 2012 +0000 + + sna/gen6: Reduce the sampler stall if already stalling for drawrect + + If we are force to emit a stall for the non-pipelined workaround, we do + not then need to emit a stall for switching samplers. + + Signed-off-by: Chris Wilson + +commit e91601278a057f70df76b74539ff4f80d203bf00 +Author: Chris Wilson +Date: Fri Jan 20 01:37:29 2012 +0000 + + sna/gen6: Force a CS stall for changing samplers + + On closer inspection, we still need the workaround of forcing a pipeline + stall if we update the samplers. + + Signed-off-by: Chris Wilson + +commit fc9531fc2df12b896e6d9e8b3f0d7248e55bfcdd +Author: Chris Wilson +Date: Thu Jan 19 21:15:35 2012 +0000 + + sna: Move the flush to the backends + + This allows us to implement backend specific workarounds and use the + more appropriate device specific flushing. + + Signed-off-by: Chris Wilson + +commit 2e0a534a888c59b921fd4cad69b980c6eda72212 +Author: Chris Wilson +Date: Thu Jan 19 18:52:35 2012 +0000 + + sna/gen7: Forward port recent changes from gen6 + + Fixes for resubmitting batches after running out of space for vertex + buffers and also a couple of trivial spans functions. + + Signed-off-by: Chris Wilson + +commit 5caf806d42a1909ff3a7716d8bc592fa68a02377 +Author: Chris Wilson +Date: Thu Jan 19 17:33:25 2012 +0000 + + sna: BLT use dword pitch only for tiled surfaces + + The gen4+ spec is a little misleading as states that all BLT pitches for + the XY commands are in dwords. Apparently not, as the upload/download + functions were already demonstrating. This only became apparent when + accelerating core text routines to offscreen pixmaps, such as composited + windows. + + Signed-off-by: Chris Wilson + +commit dbc75532d5f6a10e9fc7cfe3634d5a0db7304a99 +Author: Chris Wilson +Date: Thu Jan 19 14:36:32 2012 +0000 + + sna: Tweak move-to-cpu to ignore inplace hint if its already on the CPU + + If we test the area to be drawn against the existing CPU damage and find + it is already on the CPU, we may as well continue to utilize that + damaged region. + + Signed-off-by: Chris Wilson + +commit 7ad4a0c9423ee7f4041173c428b07ac4af312fe1 +Author: Chris Wilson +Date: Thu Jan 19 11:15:38 2012 +0000 + + sna: Only use the blitter to emit wide spans if we cannot stream the updates + + If either the region is busy on the gpu or if we need to read the + destination then we would incur penalties for trying to perform the + operation through the GTT. However, if we are simply streaming pixels to + an unbusy bo then we can do so inplace faster than computing the + corresponding GPU commands and uploading them. + + Note: currently it is universally slower to use the GPU here (the + computation of the spans is too slow). However that is only according to + micro-benchmarks, avoiding the readback is likely to be more efficient + in practice. + + Signed-off-by: Chris Wilson + +commit 9db6b9fad808175184849f3030862ea115ef0708 +Author: Chris Wilson +Date: Thu Jan 19 11:54:14 2012 +0000 + + sna: Also check for the inplace hint when migrating the whole pixmap + + Signed-off-by: Chris Wilson + +commit d3f7d5d614748306cc376d1929da2bbc14494a6e +Author: Chris Wilson +Date: Thu Jan 19 11:15:38 2012 +0000 + + sna: Only use the blitter to emit spans if we cannot stream the updates + + If either the region is busy on the gpu or if we need to read the + destination then we would incur penalties for trying to perform the + operation through the GTT. However, if we are simply streaming pixels to + an unbusy bo then we can do so inplace faster than computing the + corresponding GPU commands and uploading them. + + Signed-off-by: Chris Wilson + +commit ff2eb116ef85182eea9ed06daaa1e9a4f7bdbad3 +Author: Chris Wilson +Date: Wed Jan 18 00:56:07 2012 +0000 + + sna: Micro-optimise line extents for zero line width + + Handling zero line widths is the common case, so avoid the extra work. + + Signed-off-by: Chris Wilson + +commit 3c010745076204ed3b66e947c9eab6de84f670fe +Author: Chris Wilson +Date: Thu Jan 19 09:46:52 2012 +0000 + + sna: filter out degenerate segments whilst drawing unclipped PolySegment + + The damage layer was detecting that we were asking it to accumulate a + degenerate box emanating from PolySegment, as the unclipped paths made + the fatal assumption that it would not need to filter out degenerate + boxes. However, a degenerate line becomes a point, does the same apply + to a degenerate segment? + + Signed-off-by: Chris Wilson + +commit 35f81005f91d294e61bb4ced7cbddd1a76ccb324 +Author: Chris Wilson +Date: Thu Jan 19 00:41:08 2012 +0000 + + sna/damage: Always mark the damage as dirty when recording new boxes + + A few of the create_elts() routines missed marking the damage as dirty + so that if only part of the emebbed box was used (i.e. the damage + contained less than 8 rectangles that needed to included in the damage + region) then those were being ignored during migration and testing. + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=44682 + Signed-off-by: Chris Wilson + +commit 36e691ea900d7979950c19714e15c5887d3ea039 +Author: Chris Wilson +Date: Thu Jan 19 00:39:28 2012 +0000 + + sna: Demote MOVE_READ if the GC operation covers the clip + + If the write operation fills the entire clip, then we can demote and + possible avoid having to read back the clip from the GPU provided that + we do not need the destination data due to arithmetic operation or mask. + + Signed-off-by: Chris Wilson + +commit 17efdbc48c964d9d7b0af630c13a6ceb62fb1787 +Author: Chris Wilson +Date: Thu Jan 19 00:36:52 2012 +0000 + + sna: Clip damage area with source extents for fallback + + The damage tracking code asserts that it only handles clip regions. + However, sna_copy_area() was failing to ensure that its damage region + was being clipped by the source drawable, leading to out of bounds reads + during forced fallback. + + Signed-off-by: Chris Wilson + +commit fb07243c9a08b24e2dc03b86dc16d3cd72cbfcba +Author: Chris Wilson +Date: Wed Jan 18 21:30:34 2012 +0000 + + sna: Fine grained fallback debugging for core drawing routines + + Signed-off-by: Chris Wilson + +commit 05f9764a8860cbdd7ea2ce7f04c221ec8481e0bc +Author: Chris Wilson +Date: Wed Jan 18 21:29:45 2012 +0000 + + sna/damage: Fast path singular regions + + Mainly for consistency, so that we treat it like the other damage + addition functions. + + Signed-off-by: Chris Wilson + +commit 96529e345d0718d253e4abfa0a02cd1f9f7c0406 +Author: Chris Wilson +Date: Wed Jan 18 21:05:40 2012 +0000 + + sna: Make sure we create a mappable GPU bo when streaming writes + + If we decide to do the CPU fallback inplace on the GPU bo through a WC + mapping (because it is a large write-only operation), make sure that + the new GPU bo we create is not active and so will not^W^W is less likely + to cause a stall when mapped. + + Signed-off-by: Chris Wilson + +commit efce896e1dbab6177a773a7cf1c8eaf2dab0cdee +Author: Chris Wilson +Date: Wed Jan 18 20:53:55 2012 +0000 + + sna: Check number of boxes to migrate during move-to-cpu + + When reducing the damage we may find that it is actually empty and so + sna_damage_get_boxes() returns 0, be prepared. + + Signed-off-by: Chris Wilson + +commit 334f3f70a8b4372cb089773ecded8339d2c7d984 +Author: Chris Wilson +Date: Wed Jan 18 20:09:26 2012 +0000 + + sna/gen3: Set the batch mode for emitting video state + + The lack of kgem_set_mode() here is causing some recently added + assertions to fail. + + Signed-off-by: Chris Wilson + +commit 76203b70708b8750f52348ea8b9135191e650ff7 +Author: Chris Wilson +Date: Wed Jan 18 18:36:43 2012 +0000 + + sna: Almagamate writes based on the total number of bytes written + + Cachelines will only be dirtied for the bytes accessed so a better + metric would based on the total number of pages brought into the TLB + and the total number of cachelines used. Base the decision on whether + to try and amalgamate the upload with others on the number of bytes + copied rather than the overall extents. + + Signed-off-by: Chris Wilson + +commit 470741e84c813a257897ee69f14500207a2674dc +Author: Chris Wilson +Date: Wed Jan 18 18:35:59 2012 +0000 + + sna: Debug uploads + + All of the asserts and debug options that lead me to believe that the + tiling was completely screwy for some writes. + + Signed-off-by: Chris Wilson + +commit ab387a89cf64ace9f7d7fa52b7743e78b625f47d +Author: Chris Wilson +Date: Wed Jan 18 18:32:51 2012 +0000 + + sna: Update bo->tiling during search_linear_cache + + search_linear_cache() was updated to track the first good match whilst it + continued to search for a better match. This resulted in the first good + bo being modified and a record of those modifications lost, in + particular the change in tiling. + + Signed-off-by: Chris Wilson + +commit 4b893ab0812452238305b29b1beea224219f641d +Author: Chris Wilson +Date: Wed Jan 18 16:34:17 2012 +0000 + + sna: Remove defunct debugging option + + FORCE_GPU_ONLY now has no effect except for marking the initial pixmap + as all-damaged on the GPU, and so not testing the paths for which it was + originally introduction. + + Signed-off-by: Chris Wilson + +commit 965586544a8559b6b6b98c20e14c1266e46bf20d +Author: Chris Wilson +Date: Wed Jan 18 16:11:50 2012 +0000 + + sna/gen6: Don't assume that a batch mode implies a non-empty batch + + Just in case we set a mode then fail to emit any dwords. Sounds + inefficient and woe betide the culprit when I find it... + + Signed-off-by: Chris Wilson + +commit d2e05750360fb19575f3becd87816184615855bf +Author: Chris Wilson +Date: Wed Jan 18 16:08:51 2012 +0000 + + sna: Fix some tracking of to-be-flushed dri pixmaps + + Signed-off-by: Chris Wilson + +commit 1ad5320fd40eaaf0bffcd209bf1eabd9a20e4bf8 +Author: Chris Wilson +Date: Wed Jan 18 15:39:35 2012 +0000 + + sna: Add valgrind markup for tracking CPU mmaps + + Signed-off-by: Chris Wilson + +commit f3da610eadd1f560812603ab1a72c2e173679689 +Author: Chris Wilson +Date: Wed Jan 18 12:59:48 2012 +0000 + + sna: Prevent switching rings with render disabled + + We fudge forced used of the BLT ring unless we install a render backend + and so we must also prevent the ring from being reset when the GPU is + idle. Therefore we make handing the ring status a backend function. + + Signed-off-by: Chris Wilson + +commit 6d31cb2d943be456f4ebaa663275c6a939013d9e +Author: Chris Wilson +Date: Wed Jan 18 11:25:30 2012 +0000 + + sna: Restore use of shadow pixmaps by default without RENDER support + + If we do not have access to an accelerated render backend, only create + GPU buffers for the scanout and use an accelerated blitter for + upload/download and operating inplace on the scanout. + + Signed-off-by: Chris Wilson + +commit 15a150579c3907054e186c68382873efdbadca75 +Author: Chris Wilson +Date: Wed Jan 18 10:26:33 2012 +0000 + + intel: Trivially remove a piece of XAA dependency for shadow + + The wolves are gathering at the door baying for the removal of XAA from + Xorg. + + Signed-off-by: Chris Wilson + +commit 850495f956c811b1eb617d2e704e6bb7b5a86369 +Author: Chris Wilson +Date: Tue Jan 17 22:51:29 2012 +0000 + + sna: Fix increment of damage boxes after updating for rectangles + + Found by valgrind: + ==13639== Conditional jump or move depends on uninitialised value(s) + ==13639== at 0x5520B1E: pixman_region_init_rects (in + /usr/lib/x86_64-linux-gnu/libpixman-1.so.0.24.0) + ==13639== by 0x89E6ED7: __sna_damage_reduce (sna_damage.c:489) + ==13639== by 0x89E7FEC: _sna_damage_contains_box (sna_damage.c:1161) + ==13639== by 0x89CFCD9: sna_drawable_use_gpu_bo (sna_damage.h:175) + ==13639== by 0x89D52DA: sna_poly_segment (sna_accel.c:6130) + ==13639== by 0x21F87E: damagePolySegment (damage.c:1096) + ==13639== by 0x1565A2: ProcPolySegment (dispatch.c:1771) + ==13639== by 0x159FB0: Dispatch (dispatch.c:437) + ==13639== by 0x1491D9: main (main.c:287) + ==13639== Uninitialised value was created by a heap allocation + ==13639== at 0x4028693: malloc (in + /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) + ==13639== by 0x89E6BFB: _sna_damage_create_boxes (sna_damage.c:205) + ==13639== by 0x89E78F0: _sna_damage_add_rectangles (sna_damage.c:327) + ==13639== by 0x89CD32D: sna_poly_fill_rect_blt.isra.65 + (sna_damage.h:68) + ==13639== by 0x89DE23F: sna_poly_fill_rect (sna_accel.c:8366) + ==13639== by 0x21E9C8: damagePolyFillRect (damage.c:1309) + ==13639== by 0x26DD3F: miPaintWindow (miexpose.c:674) + ==13639== by 0x18370A: ChangeWindowAttributes (window.c:1553) + ==13639== by 0x154500: ProcChangeWindowAttributes (dispatch.c:696) + ==13639== by 0x159FB0: Dispatch (dispatch.c:437) + ==13639== by 0x1491D9: main (main.c:287) + ==13639== + + Use 'count' everywhere for consistency. + + Signed-off-by: Chris Wilson + +commit 4b5c9affd4968fd5b3d85551cf5a0b4d600a7892 +Author: Chris Wilson +Date: Tue Jan 17 20:23:26 2012 +0000 + + sna: Restore orginal shadow pointer before uploading CPU damage + + Detected by valgrind: + ==22012== Source and destination overlap in memcpy(0xd101000, 0xd101000, + 783360) + ==22012== at 0x402A180: memcpy (in + /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) + ==22012== by 0x89BD4ED: memcpy_blt (blt.c:209) + ==22012== by 0x89F2921: sna_write_boxes (sna_io.c:364) + ==22012== by 0x89CFABF: sna_pixmap_move_to_gpu (sna_accel.c:1900) + ==22012== by 0x89F49B0: sna_render_pixmap_bo (sna_render.c:571) + ==22012== by 0x8A268CE: gen5_composite_picture (gen5_render.c:1908) + ==22012== by 0x8A29B8A: gen5_render_composite (gen5_render.c:2252) + ==22012== by 0x89E6762: sna_composite (sna_composite.c:485) + ==22012== by 0x21D3C3: damageComposite (damage.c:569) + ==22012== by 0x215963: ProcRenderComposite (render.c:728) + ==22012== by 0x159FB0: Dispatch (dispatch.c:437) + ==22012== by 0x1491D9: main (main.c:287) + ==22012== + + Signed-off-by: Chris Wilson + +commit bbd6c8123635899e89911104bf84e1b7d11d66a1 +Author: Eugeni Dodonov +Date: Tue Jan 17 16:16:37 2012 -0200 + + sna: check for LLC support + + Instead of checking for CPU generation, use the libdrm-provided + I915_PARAM_HAS_LLC instead. + + v2: use a define check to verify if we have I915_PARAM_HAS_LLC. + + Signed-off-by: Eugeni Dodonov + Signed-off-by: Chris Wilson + +commit e4efde920bcab980451e79df7d645d1814e5f78d +Author: Chris Wilson +Date: Tue Jan 17 13:44:12 2012 +0000 + + sna: Track whether damage is a complete representation of the dirt + + The previous commit undoes a premature optimisation that assumed that + the current damage captured all pixels written. However, it happens to + be a useful optimisation along that path (tracking upload of partial + images), so add the necessary booking that watches for when the union + of cpu and gpu damage is no longer the complete set of all pixels + written, that is if we either migrate from one pixmap to the other, the + undamaged region goes untracked. We also take advantage of whenever we + damage the whole pixel to restore knowledge that our tracking of all + pixels written is complete. + + Signed-off-by: Chris Wilson + +commit a9b705f9a7bbd37a0543ce5fbd4c60c912d1017d +Author: Chris Wilson +Date: Tue Jan 17 12:58:43 2012 +0000 + + sna: Mark GPU as all-damaged discarding the CPU bo to prevent stalls + + If we discard the CPU bo, we lose knowledge of whatever regions had been + initialised but no longer dirty on the GPU, but instead must assume that + the entirety of the GPU bo is dirty. + + Signed-off-by: Chris Wilson + +commit 9d631e26d758eb4c2032a502604f07c5403b25ff +Author: Chris Wilson +Date: Tue Jan 17 12:58:03 2012 +0000 + + sna: Mark the freshly allocated CPU bo as in the CPU domain + + As we immediately use it after creation, we need to inform GEM of the + domain transfer. + + Signed-off-by: Chris Wilson + +commit dfbf02b8778719b86e0f5d78ee833a19436d43a0 +Author: Chris Wilson +Date: Tue Jan 17 10:55:29 2012 +0000 + + sna: Add some DBG breadcrumbs to put_image upload paths + + Signed-off-by: Chris Wilson + +commit da90afc32f19e9168cbaa4e0cdcd941d12f2c142 +Author: Chris Wilson +Date: Tue Jan 17 10:24:06 2012 +0000 + + sna: Add DBG breadcrumbs to gradient initialisation + + Put some markers into the debug log as those functions create many + proxies causing a lot of debug noise. + + Signed-off-by: Chris Wilson + +commit d14341cb22e37f52070cd92b707fec5e08038e96 +Author: Chris Wilson +Date: Tue Jan 17 00:31:43 2012 +0000 + + sna: Add a render ring detiling read path + + For SNB, in case you really, really want to use GPU detiling and not + incur the ring switch. Tweaking when to just mmap the target seems to + gain most anyway... + + The ulterior motive is that this provides fallback paths for avoiding + the use of TILING_Y with GTT mmaps which is broken on 855gm. + + Signed-off-by: Chris Wilson + +commit 3620f9ca459f7bbbb01786c95b5583023b6d870c +Author: Chris Wilson +Date: Tue Jan 17 00:23:04 2012 +0000 + + sna: Cap pwrite buffer alignment to 64k + + We only want to create huge pwrite buffers when populating the inactive + cache for mmapped uploads. In the absence of using mmap for upload, be + more conservative with the alignment value so as not to simply waste + valuable aperture and memory. + + Signed-off-by: Chris Wilson + +commit b9f59b1099eeba3fb8b25693d4f37dd13267d8a3 +Author: Chris Wilson +Date: Tue Jan 17 00:20:51 2012 +0000 + + sna: correct adjust of a stolen 2d read buffer + + If we steal a write buffer for creating a pixmap for read back, then we + need to be careful as we will have set the used amount to 0 and then try + to incorrectly decrease by the last row. Fortunately, we do not yet have + any code that attempts to create a 2d buffer for reading. + + Signed-off-by: Chris Wilson + +commit 6fc4cdafeba4517b94202ff292f05fdd90e52b2e +Author: Chris Wilson +Date: Mon Jan 16 21:34:43 2012 +0000 + + sna: Correct assertion for a partial read buffer + + The batch may legitimately be submitted prior to the attachment of the + read buffer, if, for example, we need to switch rings. Therefore update + the assertion to only check that the bo remains in existence via either + a reference from the exec or from the user + + Signed-off-by: Chris Wilson + +commit 377f5e16cd14bdf42e67b0c8f2e13b75526f3a85 +Author: Chris Wilson +Date: Mon Jan 16 15:51:33 2012 +0000 + + sna/gen[45]: clear the state tracker before setting the formats + + When backporting the patches from gen6, I didn't notice the memset that + came later, and this wasn't along the paths checked by rendercheck. + + Signed-off-by: Chris Wilson + +commit 6387f2fb8a40f32cc4a3e4228983dcf0604ac4dc +Author: Chris Wilson +Date: Mon Jan 16 14:12:36 2012 +0000 + + sna/gen[4567]: x1r5g5b5 is only a render target, not sampler + + Whilst we can render to and blend with an depth 15 target, we cannot use + it as a texture with the sampling engine. + + Signed-off-by: Chris Wilson + +commit 8b2bb666662305ab88aad8198ad69b1c98407d75 +Author: Chris Wilson +Date: Mon Jan 16 13:35:05 2012 +0000 + + sna/gen6: Restore the non-pipelined op after every WM binding table update + + The hw wants it as demonstrated by the '>' in KDE's menus. Why is it + always KDE that demonstrates coherency problems... + + Signed-off-by: Chris Wilson + +commit a11b22d172898ebfc657339a9ca56102ae92592f +Author: Chris Wilson +Date: Mon Jan 16 13:06:58 2012 +0000 + + sna/gen[23]: Remark the destination bo as dirty after flushing + + One of the side-effects of emitting the composite state is that it + tags the destination surface as dirty as a result of the *forthcoming* + operation. So emitting the flush after emitting the composite state + clears that tag, so we need to restore it for future coherency. + + Signed-off-by: Chris Wilson + +commit 2f09363a6e2c77fb23bf0e4c12c4507521fa631b +Author: Zhigang Gong +Date: Thu Jan 12 15:30:15 2012 +0800 + + uxa/glamor: Create glamor pixmap by default. + + When creating native glamor pixmaps we will get much better performance + than using the textured-drm pixmap, this commit is to make that the + default behaviour when configured to use glamor. Another advantage + of this commit is that we reduce the risk of encountering the + "incompatible region exists for this name" and the associated + render corruption. And since we now never intentionally allocate + a reusable pixmap we could just make all (intel_glamor) allocations + non-reusable without incurring too great an overhead. + + A side effect is that those glamor pixmaps do not have a + valid BO attached to them and thus it fails to get a DRI drawable. This + commit also fixes that problem by adjusting the fixup_shadow mechanism + to recreate a textured-drm pixmap from the native glamor pixmap. I tested + this with mutter, and it works fine. + + The performance gain to apply this patch is about 10% to 20% with + different workload. + + Signed-off-by: Zhigang Gong + Reviewed-by: Chris Wilson + +commit fd4c139a3959df90c7f078817fc6e2f3db715bf8 +Author: Chris Wilson +Date: Mon Jan 16 00:32:12 2012 +0000 + + sna: On LLC systems quietly replace all linear mmappings using the CPU + + If the GPU and CPU caches are shared and coherent, we can use a cached + mapping for linear bo in the CPU domain with no penalty and so avoid the + penalty of using WC/UC mappings through the GTT (and any aperture + pressure). We presume that the bo for such mappings are indeed LLC + cached... + + Signed-off-by: Chris Wilson + +commit c20a729d0a57fd5a782d9114535d9474f39a8950 +Author: Chris Wilson +Date: Sun Jan 15 22:19:22 2012 +0000 + + sna/gen6: Force a batch submission after allocation failure during composite + + Signed-off-by: Chris Wilson + +commit 380a2fca3cce4c99c5026ab800f7885a1959b16d +Author: Chris Wilson +Date: Sun Jan 15 22:13:20 2012 +0000 + + sna: Optimise call to composite with single box + + Signed-off-by: Chris Wilson + +commit 9f89250de1dc134f54cb68012fa5eb996c61d57e +Author: Chris Wilson +Date: Sun Jan 15 21:54:13 2012 +0000 + + sna: Use the prefer-GPU hint for forcing allocation for core drawing + + Similar to the render paths and simpler than the current look up tiling + method. + + Signed-off-by: Chris Wilson + +commit 8652bf7a196f53842db70f5c70aded31b470b0ab +Author: Chris Wilson +Date: Sun Jan 15 19:04:01 2012 +0000 + + sna: Don't track an unmatching tiled bo when searching the linear cache + + Signed-off-by: Chris Wilson + +commit cc4b616990fa71e96d38512d8cdb4c3e2abb21c0 +Author: Chris Wilson +Date: Sun Jan 15 19:55:50 2012 +0000 + + sna/video: Increase the level of paranoia + + In how many different ways can we check that the scanout is allocated + before we start decoding video? + + Signed-off-by: Chris Wilson + +commit 7f480ba02c66fcc02bad483731c4c0cf6c746c0d +Author: Chris Wilson +Date: Sun Jan 15 18:45:06 2012 +0000 + + sna: Tidy search through active bo cache + + Perform the assertions upon cache consistency upfront, and tidy the + indentation. + + Signed-off-by: Chris Wilson + +commit 6f7bc35d7f956f7c2507eabc874ead1a83c85ddb +Author: Chris Wilson +Date: Sun Jan 15 18:14:24 2012 +0000 + + sna: Use indirect uploads rather than teardown existing CPU maps + + Allow the snoopable CPU mapping to be used inplace of the GTT map for + untiled bo. + + Signed-off-by: Chris Wilson + +commit 475fa67ed320f94df37ec86fe6c5dda886923751 +Author: Chris Wilson +Date: Sun Jan 15 17:30:00 2012 +0000 + + sna: Fast path move-area-to-cpu when the pixmap is already on the cpu + + Signed-off-by: Chris Wilson + +commit 37ced44a53008debaf869ec9ef4ba2e5d6982e76 +Author: Chris Wilson +Date: Sun Jan 15 15:35:57 2012 +0000 + + sna: Be a little more lenient wrt damage migration if we have CPU bo + + The idea being that they facilitate copying to and from the CPU, but + also we want to avoid stalling on any pixels help by the CPU bo. + + Signed-off-by: Chris Wilson + +commit e3732a6f7f61a959521be9a668bba045591e633c +Author: Chris Wilson +Date: Sun Jan 15 11:06:59 2012 +0000 + + sna: Defer ring switching until after a period of idleness + + Similar to the desire to flush the next batch after an overflow, we do + not want to incur any lag in the midst of drawing, even if that lag is + mitigated by GPU semaphores. + + Signed-off-by: Chris Wilson + +commit 5df7147b0934dadc63459c2c0f33e0663692425a +Author: Chris Wilson +Date: Sun Jan 15 10:28:00 2012 +0000 + + sna: Restore the kgem_create_map() symbol + + As the stub is exported to the driver even in the absence of vmapping. + + Signed-off-by: Chris Wilson + +commit be53740c6f0bb182e3d88f0597f127732c839316 +Author: Chris Wilson +Date: Sun Jan 15 10:16:13 2012 +0000 + + sna: Various DBG typos + + Fix some mispellings inside the DBG messages + + Signed-off-by: Chris Wilson + +commit 349e9a7b94199e759acaaccac3abf5e28f3c246f +Author: Chris Wilson +Date: Sun Jan 15 10:04:11 2012 +0000 + + sna: Prefer read-boxes inplace again + + Using the gpu to do the detiling just incurs extra latency and an extra + copy, so go back to using a fence and GTT mapping for the common path. + + Signed-off-by: Chris Wilson + +commit 09dc8b1b358aa33836d511b75f92e8d096bc7e59 +Author: Chris Wilson +Date: Sat Jan 14 23:21:29 2012 +0000 + + sna/gen7: Check reused source for validity + + Be sure the mask picture has a valid format even though it points to the + same pixels as the valid source. And also be wary if the source was + converted to a solid, but the mask is not. + + Signed-off-by: Chris Wilson + +commit d9871f01d8c4584c1f39eb09b51d5461863934e9 +Author: Chris Wilson +Date: Sat Jan 14 23:21:29 2012 +0000 + + sna/gen6: Check reused source for validity + + Be sure the mask picture has a valid format even though it points to the + same pixels as the valid source. And also be wary if the source was + converted to a solid, but the mask is not. + + Signed-off-by: Chris Wilson + +commit 1d6030322e2c3bae87a0173a32fb8d341dea560c +Author: Chris Wilson +Date: Sat Jan 14 23:21:29 2012 +0000 + + sna/gen5: Check reused source for validity + + Be sure the mask picture has a valid format even though it points to the + same pixels as the valid source. And also be wary if the source was + converted to a solid, but the mask is not. + + Signed-off-by: Chris Wilson + +commit 0e4a24ef6c186909c99a501cb606994b5c10a813 +Author: Chris Wilson +Date: Sat Jan 14 23:21:29 2012 +0000 + + sna/gen4: Check reused source for validity + + Be sure the mask picture has a valid format even though it points to the + same pixels as the valid source. And also be wary if the source was + converted to a solid, but the mask is not. + + Signed-off-by: Chris Wilson + +commit ea299f2523d5adeca84274bb7003cde8ec743a44 +Author: Chris Wilson +Date: Sat Jan 14 23:21:29 2012 +0000 + + sna/gen3: Check reused source for validity + + Be sure the mask picture has a valid format even though it points to the + same pixels as the valid source. And also be wary if the source was + converted to a solid, but the mask is not. + + Signed-off-by: Chris Wilson + +commit 007da2f97894814eaded4d24e0481f950ca7bd00 +Author: Chris Wilson +Date: Sat Jan 14 23:21:29 2012 +0000 + + sna/gen2: Check reused source for validity + + Be sure the mask picture has a valid format even though it points to the + same pixels as the valid source. And also be wary if the source was + converted to a solid, but the mask is not. + + Signed-off-by: Chris Wilson + +commit 1d55b42fbd77e85ab8930b78bb5a9e3bccbca49e +Author: Chris Wilson +Date: Sat Jan 14 23:44:23 2012 +0000 + + sna: Fix read back of partial mmapped buffers + + Do not move a GTT mapped buffer into the CPU domain, it causes untold + pain for no benefit! + + Signed-off-by: Chris Wilson + +commit 046e945173397e5fee36a231303b68a6bc9d809d +Author: Chris Wilson +Date: Sat Jan 14 23:25:52 2012 +0000 + + sna: Discard read buffers after use + + Rather than pollute the cache with bo that are known not to be in the + GTT and are no longer useful, drop the bo after we read from it. + + Signed-off-by: Chris Wilson + +commit 421ee0bb53321e9fb2f17c850c51b80cc385bf57 +Author: Chris Wilson +Date: Sun Jan 15 00:46:47 2012 +0000 + + sna: Do not assume that the mappable aperture size is a power of two + + And instead derive a power-of-two alignment value for partial buffer + sizes from the mappable aperture size and use that during + kgem_create_buffer() + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=44682 + Signed-off-by: Chris Wilson + +commit 5d5da35c9fab4e7154921861ecbb83befb8840e5 +Author: Chris Wilson +Date: Sat Jan 14 18:28:24 2012 +0000 + + sna/gen[23]: Check for room in the batch before emitting pipeline flushes + + Use a single idiom and reuse the check built into the state emission, + for both spans/boxes paths. + + Signed-off-by: Chris Wilson + +commit f7e4799687d5010ea0b56aeb6fbbb2e854b1b363 +Author: Chris Wilson +Date: Sat Jan 14 16:53:38 2012 +0000 + + sna/gen6: Allow greater use of BLT + + Typically we will be bound to the RENDER ring as once engaged we try not + to switch. However, with semaphores enabled we may switch more freely + and there it is advantageous to use as much of the faster BLT as is + feasible. + + The most contentious point here is the choice of whether to use BLT for + copies by default. microbenchmarks (compwinwin) benefit from the + coallescing performed in the render batch, but the more complex traces + seem to prefer utilizing the blitter. The debate will continue... + + Signed-off-by: Chris Wilson + +commit c1ce34d4509a3f3e963d82ac0569a21706892f8e +Author: Chris Wilson +Date: Sat Jan 14 15:08:18 2012 +0000 + + sna/gen6: Tidy markup for when using the BLT is truly preferrable + + Signed-off-by: Chris Wilson + +commit b64751dbdb1b88b91ad97aaf995b4261876cf860 +Author: Chris Wilson +Date: Sat Jan 14 13:50:50 2012 +0000 + + sna: Be more lenient wrt switching rings if the kernel supports semaphores + + If the kernel uses GPU semaphores for its coherency mechanism between + rings rather than CPU waits, allow the ring to be chosen on the basis + of the subsequent operation following a submission of batch. (However, + since batches are likely to be submitted in the middle of a draw, then + the likelihood is for ddx to remain on one ring until forced to switch + for an operation or idle, which is the same situation as before and so + the difference is miniscule.) + + Signed-off-by: Chris Wilson + +commit 295a22d2709b2442b5254968437f897dac22a0ec +Author: Chris Wilson +Date: Sat Jan 14 14:12:25 2012 +0000 + + sna: Ensure that the batch mode is always declared before emitting dwords + + Initially, the batch->mode was only set upon an actual mode switch, + batch submission would not reset the mode. However, to facilitate fast + ring switching with semaphores, reseting the mode upon batch submission + is desired which means that if we submit the batch in the middle of an + operation we must redeclare its mode before continuing. + + Signed-off-by: Chris Wilson + +commit 0d2a50772200d868d094f90dc1d30c1b4d7930ba +Author: Chris Wilson +Date: Sat Jan 14 11:03:55 2012 +0000 + + sna/glyphs: Cache the glyph image on the fallback path as well + + The glyph cache grew to accommodate the fallback pixman image for mask + generation, and is equally applicable along the full fallback path. + + Signed-off-by: Chris Wilson + +commit f3e0ba4f65db2b85f89aa3868d153434bc41c811 +Author: Chris Wilson +Date: Sat Jan 14 10:17:27 2012 +0000 + + sna/gen5: Disable render glyphs_to_dst + + Processing more than a single rectangle using the CA path on ILK is + extremely hit-or-miss, often resulting in the absence of the second + primitive (ie. the glyphs are cleared but not added.) This is + reminiscent of the complete breakage of the BRW shaders, none of which + can handle more than a single rectangle. + + Signed-off-by: Chris Wilson + +commit fb92818ba4dc81ce62d58a87b5af6cb1e3a96708 +Author: Chris Wilson +Date: Sat Jan 14 01:48:11 2012 +0000 + + sna: Pass render operation to flush and avoid the implicit flush-on-batch-end + + Signed-off-by: Chris Wilson + +commit a62429a1f79b8fa4a5ddaf61b2bc80fc8dbe576c +Author: Chris Wilson +Date: Fri Jan 13 19:00:01 2012 +0000 + + sna: Upload continuation vertices into mmapped buffers + + In the common case, we expect a very small number of vertices which will + fit into the batch along with the commands. However, in full flow we + overflow the on-stack buffer and likely several continuation buffers. + Streaming those straight into the GTT seems like a good idea, with the + usual caveats over aperture pressure. (Since these are linear we could + use snoopable bo for the architectures that support such for vertex + buffers and if we had kernel support.) + + Signed-off-by: Chris Wilson + +commit 24df8ab9742f771cfeb6d30bd8a61a17a9e22ca7 +Author: Chris Wilson +Date: Fri Jan 13 16:15:21 2012 +0000 + + sna: Reverse the chronological sort order of inactive vma entries + + The goal is to reuse the most recently bound GTT mapping in the hope + that is still mappable at the time of reuse. + + Signed-off-by: Chris Wilson + +commit 2f26bbe3dd55bfe26b6f93fc1f9e9813fc11f7c4 +Author: Chris Wilson +Date: Fri Jan 13 15:59:51 2012 +0000 + + sna: Remove the short-circuiting of all-damage in move_to_cpu + + To allow a replacement of the complete pixmap to be performed in place. + + Signed-off-by: Chris Wilson + +commit c81dba18e6a308d716a11b90da6e53ca7f5f8a02 +Author: Chris Wilson +Date: Fri Jan 13 14:21:13 2012 +0000 + + sna: Hint whether we prefer to use the GPU for a pixmap + + This includes the condition where the pixmap is too large, as well as + being too small, to be allocatable on the GPU. It is only a hint set + during creation, and may be overridden if required. + + This fixes the regression in ocitysmap which decided to render glyphs + into a GPU mask for a destination that does not fit into the aperture. + + Signed-off-by: Chris Wilson + +commit 2bd942d55314426d7f429d7ccc0b62a622a79009 +Author: Chris Wilson +Date: Fri Jan 13 14:08:34 2012 +0000 + + sna/trapezoids: Quieten the debugging of the gory details of the rasteriser + + Hide the noise under another level of debugging so that hopefully the + reason why it chose a particular path become clear. + + Signed-off-by: Chris Wilson + +commit 5dbcfc2ee3af64846298dbcb20db27c93b3d57f2 +Author: Chris Wilson +Date: Fri Jan 13 13:52:10 2012 +0000 + + sna: Be more lenient in not forcing to the GPU if the sources have CPU damage + + Signed-off-by: Chris Wilson + +commit 20ff4a1d73cc10e1f53050b19b8799ccbb5c7d04 +Author: Chris Wilson +Date: Fri Jan 13 13:30:13 2012 +0000 + + sna: Use top_srcdir to detect .git rather than top_builddir + + For srcdir != builddir builds, we need to be searching the source tree + for the git id. + + Signed-off-by: Chris Wilson + +commit a4d5d725996b94e314ae7697c7a597ed2f60e8cd +Author: Chris Wilson +Date: Fri Jan 13 10:41:44 2012 +0000 + + sna: Experiment with GTT mmapped upload buffers + + In a few places, we can stream the source into the GTT and so upload in + place through the WC mapping. Notably, in many other places we want to + rasterise on a partial in cacheable memory. So we need to notify the + backend of the intended usage for the buffer and when we think it is + appropriate we can allocate a GTT mapped pointer for zero-copy upload. + + The biggest improvement tends to be in the PutComposite style of + microbenchmark, yet throughput for trapezoid masks seems to suffer (e.g. + swfdec-giant-steps on i3 and gen2 in general). As expected, the culprit + of the regression is the aperture pressure causing eviction stalls, which + the pwrite paths sidesteps by doing a cached copy when there is no GTT + space. This could be alleviated with an is-mappable ioctl predicting when + use of the buffer would block and so falling back in those cases to + pwrite. However, I suspect that this will improve dispatch latency in + the common idle case for which I have no good metric. + + Signed-off-by: Chris Wilson + +commit 252f3818250ecf4776f20afa8111d7f1f6f29c18 +Author: Chris Wilson +Date: Fri Jan 13 11:30:32 2012 +0000 + + sna: Relinquish the GTT mmap on inactive buffers if moved out of the aperture + + Signed-off-by: Chris Wilson + +commit 9c73dd91e90810116c215060bac434c5e8174f5f +Author: Chris Wilson +Date: Sat Jan 14 17:00:01 2012 +0000 + + Include to repair build + + intel_module.c:41:48: error: missing binary operator before token "(" + +commit b213f6e876f29cbcaccffeeb733726be4c91529e +Author: Stefan Dirsch +Date: Sat Jan 14 05:43:33 2012 +0100 + + Make driver backwards compatible for server 1.6.x. + + Signed-off-by: Stefan Dirsch + +commit 94217a4dd908f1368dfdef90797ce74a081663fb +Author: Chris Wilson +Date: Fri Jan 13 10:03:28 2012 +0000 + + sna: Decouple dirty pixmaps from list if we fail to upload them + + Rather than iterate endlessly trying to upload the same pixmap when + failing to flush dirty CPU damage, try again on the next flush. + + Signed-off-by: Chris Wilson + +commit 65ef369c733ab45945a7d5fe4b76fe5c7167b51b +Author: Chris Wilson +Date: Fri Jan 13 09:58:40 2012 +0000 + + sna: Decouple from CPU dirty list after removing all CPU damage + + In the paths where we discard CPU damage, we also need to remove it + from the dirty list so that we do not iterate over it during flush. + + Signed-off-by: Chris Wilson + +commit 0845fcef9e664eb100b55ad1cc20743844deee58 +Author: Chris Wilson +Date: Thu Jan 12 23:45:03 2012 +0000 + + sna: Correct iteration counter for stippled blits + + ==7215== Invalid read of size 2 + ==7215== at 0x51A72F3: sna_poly_fill_rect_stippled_8x8_blt + (sna_accel.c:7340) + ==7215== by 0x51A9CDF: sna_poly_fill_rect_stippled_blt + (sna_accel.c:8163) + ==7215== by 0x51A3878: sna_poly_segment (sna_accel.c:6090) + ==7215== by 0x216C02: damagePolySegment (damage.c:1096) + ==7215== by 0x13F6E8: ProcPolySegment (dispatch.c:1771) + ==7215== by 0x1436B4: Dispatch (dispatch.c:437) + ==7215== by 0x131279: main (main.c:287) + ==7215== Address 0x6f851e8 is 0 bytes after a block of size 32 alloc'd + ==7215== at 0x4825DEC: malloc (vg_replace_malloc.c:261) + ==7215== by 0x51A3558: sna_poly_segment (sna_accel.c:6049) + ==7215== by 0x216C02: damagePolySegment (damage.c:1096) + ==7215== by 0x13F6E8: ProcPolySegment (dispatch.c:1771) + ==7215== by 0x1436B4: Dispatch (dispatch.c:437) + ==7215== by 0x131279: main (main.c:287) + + An example being the stippled outline in gimp, the yellow marching ants, + would randomly walk over the entire image. + + Signed-off-by: Chris Wilson + +commit 5c2c6474efd4dbc5a0fc9c68ef4e5b5e5cfee415 +Author: Chris Wilson +Date: Thu Jan 12 23:11:05 2012 +0000 + + sna/dri: Hook up a compile option to switch colour buffers to Y-tiling + + Signed-off-by: Chris Wilson + +commit 59b79e5952fdc40f8c50f74a72a19363cb426140 +Author: Chris Wilson +Date: Thu Jan 12 21:05:39 2012 +0000 + + sna: Reorder composite-done to destroy mask bo before source bo + + Just in the unlikely event that we hit the delete-partial-upload path + which prefers destroying the last bo first. + + Signed-off-by: Chris Wilson + +commit 983b755313df8a0d256c59c32ec4106e35f237aa +Author: Chris Wilson +Date: Thu Jan 12 21:05:16 2012 +0000 + + sna/damage: Fix union of extents with dirty damage but no region + + By failing to account for certain paths which would create a damage elt + without fully initialisating the damage region (only the damage extents), + we would later overwrite the damage extents with only the extents for + this operation (rather than the union of this operation with the current + damage). This fixes a regression from 098592ca5d, + (sna: Remove the independent tracking of elts from boxes). + + Include the associated damage migration debugging code of the callers. + + Signed-off-by: Chris Wilson + +commit 8d2f1eefe142b65db7d8821ba0f80fdb0902b2d5 +Author: Chris Wilson +Date: Thu Jan 12 21:08:41 2012 +0000 + + sna: Pass a hint that we may like to perform the fallback in place + + If we do not read back from the destination, we may prefer to utilize a + GTT mapping and perform the fallback inplace. For the rare event that we + wish to fallback and do not already have a shadow... + + Signed-off-by: Chris Wilson + +commit 48ab72754d0069a3247c5fee8c353a6b593eaed9 +Author: Chris Wilson +Date: Thu Jan 12 21:07:15 2012 +0000 + + sna: Use the GPU bo if it is all damaged + + By marking the scratch upload pixmap as damaged in both domains, we + confused the texture upload path and made it upload the pixmap a second + time. If either bo is all-damaged, use it! + + Signed-off-by: Chris Wilson + +commit 20a4d7181983c7fed289844be49ccaf3f56965c6 +Author: Chris Wilson +Date: Thu Jan 12 21:05:51 2012 +0000 + + sna: Dump batch contents for debugging before modification + + We need to dump the batch contents before the maps are made by the + construction of the batch itself. + + Signed-off-by: Chris Wilson + +commit 7932a2a259069bb7d19af8566f7b7704f6c2eade +Author: Chris Wilson +Date: Thu Jan 12 14:06:22 2012 +0000 + + sna: Update for removal of backwards compatible miWideDash + + miWideDash() no longer calls miZeroLineDash() when called with + gc->lineWidth==0, we need to do so ourselves. + + Signed-off-by: Chris Wilson + +commit b7cefddd467bfd0c100219969712a0133475004c +Author: Chris Wilson +Date: Thu Jan 12 13:17:43 2012 +0000 + + sna: Re-enable min-alignment workaround on pre-SNB hw + + Confirmed as still being required for both gen3 and gen4. One day I will + get single-stream mode working, just not today apparently. + + Signed-off-by: Chris Wilson + +commit 978e1aeceab3c1a524f7d7a070fe04f37530c8d9 +Author: Chris Wilson +Date: Thu Jan 12 11:38:56 2012 +0000 + + sna: Only shrink a partial buffer if it is no longer used. + + The condition on being able to shrink a buffer is more severe than just + whether we are reading from the buffer, but also we cannot swap the + handles if the existing handle remains exposed via a proxy. + + Signed-off-by: Chris Wilson + +commit d3169154d18600e0d41db5f833fad52970e17b55 +Author: Chris Wilson +Date: Thu Jan 12 11:36:05 2012 +0000 + + sna: Improve a DBG message + + Signed-off-by: Chris Wilson + +commit 2a22990968aebd53a7bfeaf19e58ee609b980e5f +Author: Chris Wilson +Date: Thu Jan 12 11:22:06 2012 +0000 + + sna: Prevent 60Hz wakeups if the client stops in mid-render + + Only continue to wake up if the scanout remains active. + + Signed-off-by: Chris Wilson + +commit 1c0e9916caef6594511009c8cb79071ac0d82090 +Author: Chris Wilson +Date: Thu Jan 12 11:12:56 2012 +0000 + + sna: Align the partial buffer contents to cachelines + + To enable Daniel's faster pwrite paths. Only one step removed from using + whole page alignment... + + Signed-off-by: Chris Wilson + +commit 1e4080318f58fd51f37792eefd367e2e4c813ea3 +Author: Chris Wilson +Date: Thu Jan 12 10:47:19 2012 +0000 + + sna: Replace the open-coded bubble sort of the partial list + + Signed-off-by: Chris Wilson + +commit 7290ced5791f9860b00901fa9a4545ab5a067fae +Author: Chris Wilson +Date: Thu Jan 12 02:59:43 2012 +0000 + + sna/video: Fix for changes in damage api + + We can avoid both calls to modify the damage with one simple check. + + Signed-off-by: Chris Wilson + +commit 87e6dcb3b06c274ecba5de56d4e86fec73e46dbb +Author: Chris Wilson +Date: Thu Jan 12 02:09:22 2012 +0000 + + sna: Don't call RegionIntersect for the trivial PutImage + + Signed-off-by: Chris Wilson + +commit 1bd6665093574372248a0743e5630e68aac653ed +Author: Chris Wilson +Date: Thu Jan 12 01:37:08 2012 +0000 + + sna: Disable the min alignment workaround + + Allow all generations to use the minimum alignment of 4 bytes again as + it appears to be working for me... Or at least what remains broken seems + to be irrespective of this alignment. + + Signed-off-by: Chris Wilson + +commit 112b8959261712aaa82f92af0aca4b97fa7c7f03 +Author: Chris Wilson +Date: Thu Jan 12 01:38:18 2012 +0000 + + sna: Prevent shrinking a partial buffer stolen for a read + + If we reuse a partial buffer for a read, we cannot shrink it during + upload to the device as we do not track how many bytes we actually need + for the read operation. + + Signed-off-by: Chris Wilson + +commit b09ae4c20313fea7af11f77cd673039635d4dcc7 +Author: Chris Wilson +Date: Thu Jan 12 00:58:08 2012 +0000 + + sna: Don't drop expired partial bo immediately, wait until dispatch + + As the partial bo may be coupled into the execlist, we may as well hang + onto the memory to service the next partial buffer request until it + expires in the next dispatch. + + Signed-off-by: Chris Wilson + +commit a3c42565a8f557b2e7f7ff7bfa45b13b606f2968 +Author: Chris Wilson +Date: Wed Jan 11 16:39:45 2012 +0000 + + sna: Store damage-all in the low bit of the damage pointer + + Avoid the function call overhead by inspecting the low bit to see if it + is all-damaged already. + + Signed-off-by: Chris Wilson + +commit c64a9d0683e047a7eb041df78db746f6dd387b5e +Author: Chris Wilson +Date: Wed Jan 11 19:51:42 2012 +0000 + + sna: Choose a stride for the indirect replacement + + Don't blithely assume that the incoming bytes are appropriately aligned + for the destination buffer. Indeed we may be replacing the destination + bo with the shadow bytes out of another,larger, pixmap, in which case we + do need to create a stride that is appropriate for the upload an + perform the 2D copy. + + Signed-off-by: Chris Wilson + +commit b82851e74d5010ee08938ee42fa44c29fed633b1 +Author: Chris Wilson +Date: Wed Jan 11 15:42:00 2012 +0000 + + sna: Mark upload pixmaps as being wholly GPU damaged + + So that subsequent code resists performing CPU operations with them + (after they have been populated.) + + Marking both sides as wholly damaged breaks the rules, but should work + out so long as we check whether we can perform the operation within the + target damage first. + + Signed-off-by: Chris Wilson + +commit 2a5ab05f1690484c230e8f876a3f7aefb371af71 +Author: Chris Wilson +Date: Wed Jan 11 15:24:28 2012 +0000 + + sna: Use a minimum alignment of 64 + + We should be able to reduce this by disabling dual-stream mode of the + GPU (which we want to achieve any way for 2D performance). Artefacts + in small uploads demonstrate that we fail to do. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44150 + Signed-off-by: Chris Wilson + +commit e94807759eb6cfb10bd2d372fa71cc64a730bc7c +Author: Chris Wilson +Date: Wed Jan 11 12:13:18 2012 +0000 + + sna/gen6: Special case spans with no transform + + As the no transform is a special case of affine, we were attempting to + deference the NULL transform in order to determine if it was a simple + no-rotation matrix. As the operation is extremely simple, add a special + case vertex program to speed it up. + + Signed-off-by: Chris Wilson + +commit 0a5313900ec9a7c499eb5051f3a5f078a9b0bbde +Author: Chris Wilson +Date: Wed Jan 11 12:09:13 2012 +0000 + + sna: Explicitly retire the bo following a serialisation point + + This is to keep the sanity checks in order, but conceptually should be + useful as well. + + Signed-off-by: Chris Wilson + +commit 2add5991a7d186d8271cb79ae4f62dad7b4ca243 +Author: Chris Wilson +Date: Wed Jan 11 11:33:19 2012 +0000 + + sna: Mark the bo as no longer in the GPU domain after clearing needs_flush + + Signed-off-by: Chris Wilson + +commit fec70985719eec75b7fa799bddc3115fb329ab86 +Author: Chris Wilson +Date: Wed Jan 11 10:57:57 2012 +0000 + + sna: Add assertions to track requests + + Signed-off-by: Chris Wilson + +commit a93c93be76f6d5d2b481971349aabd15f282c3e8 +Author: Chris Wilson +Date: Wed Jan 11 00:05:20 2012 +0000 + + sna/gen6: Add a vertex program for a simple (affine, no rotation) spans + + I long for the day when this code is obsolete... Until then, this gives + a nice boost in the fishtank. + + Signed-off-by: Chris Wilson + +commit 3cf5da1090ac777044912ec24619d349d1f6b521 +Author: Chris Wilson +Date: Tue Jan 10 23:32:29 2012 +0000 + + sna: Amalgamate small replacements into upload buffers + + Similar for the standard io paths, try to reuse an upload buffer for a + small replacement pixmap. + + Signed-off-by: Chris Wilson + +commit f0e3f6b5bebf7471d3e3e84bd9b2d8469eb64093 +Author: Chris Wilson +Date: Tue Jan 10 22:12:41 2012 +0000 + + sna: Check needs-flush status immediately upon destroy + + Signed-off-by: Chris Wilson + +commit b4ae6dbaedd774f250b610b1e7323897c4abe23a +Author: Chris Wilson +Date: Tue Jan 10 21:25:28 2012 +0000 + + sna: Align the small upload buffers to 2 texels, and the pitch to dwords + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44150 + Signed-off-by: Chris Wilson + +commit 46f6c6917effbc43305367581cc1bbaa962c0251 +Author: Chris Wilson +Date: Tue Jan 10 20:34:09 2012 +0000 + + sna: A partial read buffer is allowed to be in the GPU domain + + As we can create the read buffer from an active cached bo, it may + already be in the GPU domain by the time we first finish it, so fix the + broken assertion. + + Signed-off-by: Chris Wilson + +commit 3c26055639f789b211f7db982e65ec0b86b23d4a +Author: Chris Wilson +Date: Tue Jan 10 20:06:51 2012 +0000 + + sna: Shrink the partial upload buffers before compacting the batch + + So that the relocation entries point into the contiguous surface/batch + and can be trivially fixed up. + + Signed-off-by: Chris Wilson + +commit 7b077a4d3d549cde79d5b876289203788294493c +Author: Chris Wilson +Date: Tue Jan 10 18:40:53 2012 +0000 + + sna: Make the check for a single fill-rectangle clearer before modifying damage + + Signed-off-by: Chris Wilson + +commit ca2a07adc45273dc1abeb4b3ba7f88461aaf9c00 +Author: Chris Wilson +Date: Tue Jan 10 17:13:38 2012 +0000 + + sna: Release the stale GTT mapping after recreating the bo with new tiling + + Signed-off-by: Chris Wilson + +commit 8dd913fd3a093b54fc024fea2b31a3db2518db8d +Author: Chris Wilson +Date: Tue Jan 10 10:38:43 2012 +0000 + + sna: Add reminder about possible future tiling optimisations + + Signed-off-by: Chris Wilson + +commit 21948578d0d87f38447ef1ae44fada406949bca8 +Author: Chris Wilson +Date: Tue Jan 10 03:19:16 2012 +0000 + + sna: Disable the inline xRGB to ARGB upload conversion + + As we have to upload the dirty data anyway, setting the + alpha-channel to 0xff should be free. Not so for firefox-asteroids on + Atom at least. + + Signed-off-by: Chris Wilson + +commit 87f73b043426c47efa7670fb65bdcc7dfcf71fc3 +Author: Chris Wilson +Date: Tue Jan 10 01:42:37 2012 +0000 + + sna/gen[23]: Tile render fill to oversized bo + + If we are forced to perform a render operation to a bo too large to fit + in the pipeline, copy to an intermediate and split the operation into + tiles rather than fallback. + + Signed-off-by: Chris Wilson + +commit 2ccb31c5a4120efb940168c5e52154add01b0586 +Author: Chris Wilson +Date: Tue Jan 10 01:41:09 2012 +0000 + + sna: Shrink upoads buffers + + If we do not fill the whole upload buffer, we may be able to reuse a + smaller buffer that is currently bound in the GTT. Ideally, this will + keep our RSS trim. + + Signed-off-by: Chris Wilson + +commit 572cc76be5c78102166f2b3640640e21acdfa129 +Author: Chris Wilson +Date: Tue Jan 10 09:13:34 2012 +0000 + + sna: Destroy the counter damage after a reduction-to-all + + If, for instance, we reduce the GPU damage to all we know that there can + be no CPU damage even though it may still have a region with a list of + subtractions. Take advantage of this knowledge and cheaply discard that + damage without having to evaluate it. + + This should prevent a paranoid assertion that there is no cpu damage + when discarding the CPU bo for an active pixmap. + + Signed-off-by: Chris Wilson + +commit 4a255e13164440b797e5ac11dcbf72f0827a3094 +Author: Chris Wilson +Date: Tue Jan 10 16:34:23 2012 +0000 + + sna: Replace the free-inactive-gpu-bo with the generic code + + The function was semantically equivalent to moving the pixmap to the CPU + for writing, so replace it with a call to the generic function. + + Signed-off-by: Chris Wilson + +commit c1d403266a611a68081690d19f6debb8e343095f +Author: Chris Wilson +Date: Tue Jan 10 00:41:05 2012 +0000 + + sna: Allow for xRGB uploads to replace their target bo + + Signed-off-by: Chris Wilson + +commit 406776cd955c3c384d4a537300e21eebe4413666 +Author: Chris Wilson +Date: Tue Jan 10 00:25:14 2012 +0000 + + sna: Rearrange buffer allocation to prefer llc bo over vmaps + + If we can create snoopable bo, we prefer to use those as creating a vmap + forces a new bo creation increasing GTT pressure. + + Signed-off-by: Chris Wilson + +commit b76865fa3deff2f44a1158914a124b9c81d67eca +Author: Chris Wilson +Date: Mon Jan 9 22:11:21 2012 +0000 + + sna/gen2: Try to avoid creating a bo for solid colours + + As we try to use the diffuse/specular and only resort to using a texture + operation for convenience in the rare case of a solid mask. + + Signed-off-by: Chris Wilson + +commit 981aae104a96b41db88cc381cc7592818f3e1298 +Author: Chris Wilson +Date: Mon Jan 9 22:02:40 2012 +0000 + + sna/gen2: Eliminate some switching between logic op and blend + + If the new mode can be done either using a logic op or with the blend + unit, prefer the currently enabled unit. + + Signed-off-by: Chris Wilson + +commit d65b7f9cf46a48e3bfb37c0b75df55aa1e7bff41 +Author: Chris Wilson +Date: Mon Jan 9 21:58:03 2012 +0000 + + sna/blt: Rearrange to reduce a out-of-bounds copy to a clear + + If we asked to use the BLT, try to avoid trigging a context switch for + a trivial case where we sample outside of a NONE source and so can + reduce the operation to a clear. + + Signed-off-by: Chris Wilson + +commit 09e54c553680cbc2f3b4319cdab0f3d1af1574a8 +Author: Chris Wilson +Date: Mon Jan 9 14:04:41 2012 +0000 + + sna/gen2: Add poor-man's linear gradient support + + Convert the linear gradient to a texture ramp and compute the texture + coordinates in the standard manner. + + Signed-off-by: Chris Wilson + +commit 6c70558ae7298db94724c931d88a730ef0151608 +Author: Chris Wilson +Date: Sun Jan 8 20:48:48 2012 +0000 + + sna: mark the cpu bo used for the upload buffer as in CPU domain + + For correctness we need to inform GEM of the change of domain for the + buffer so that it knows to invalidate any caches when it is next used by + the GPU. + + Signed-off-by: Chris Wilson + +commit 9ec31af02922bb016d0dfba07bc60cdca35b36f8 +Author: Chris Wilson +Date: Sun Jan 8 15:52:17 2012 +0000 + + sna/io: Combine small uploads into single writes + + For a small update, try and amalgamate the upload buffer. + + Signed-off-by: Chris Wilson + +commit 4db1bb3fd81b51e74b7f3e90078627d9d96fbefe +Author: Chris Wilson +Date: Sun Jan 8 14:20:40 2012 +0000 + + Removed deprecated xf86PciInfo.h includes + + The driver should and does provide its own PCI-IDs. + + Signed-off-by: Chris Wilson + +commit 54232d1a5da51d0f68fe099436bb0a1a2e249954 +Author: Chris Wilson +Date: Sun Jan 8 15:22:58 2012 +0000 + + sna: Add ricer stripes to memcpy_xor + + Signed-off-by: Chris Wilson + +commit c037b4f542a7b21cbaecedec259da3589db10039 +Author: Chris Wilson +Date: Sun Jan 8 08:58:41 2012 +0000 + + sna: Tune cache size for cpu bo cache + + This helps SNB on cairo-traces that utilize lots of temporary uploads + (rasterised sources and masks for instance), but comes at a cost of + regressing others... + + In order to counter the regression from increasing the GTT cache size, + the CPU/GTT vma cache are split and accounted separately. + + Signed-off-by: Chris Wilson + +commit 26042b2660d87044e1920a1267d9984c00c9566a +Author: Chris Wilson +Date: Sun Jan 8 11:45:11 2012 +0000 + + sna: Bubble sort the partial buffer list back into order after trimming padding + + After reducing the used size in the partial buffer, we need to resort + the list to maintain the list in decreasing amount of available space. + + Signed-off-by: Chris Wilson + +commit 3f7ea44bf19a03ee81b683885c9c2416092254a3 +Author: Chris Wilson +Date: Sun Jan 8 02:27:28 2012 +0000 + + sna/gen[67]: Hook into the clear operation for glyph masks + + Allow SandyBridge to specialise its clear routine to reduce the number + of ring switches. It may be interesting to specialise the clear routines + even further and use the special render clear commands... + + Signed-off-by: Chris Wilson + +commit 803ac5c6b992cb5448c67b11345b87a5d2b9c60d +Author: Chris Wilson +Date: Sun Jan 8 01:38:09 2012 +0000 + + sna/trapezoids: Don't risk stalling for inplace SRC trapezoids + + Optimistically we would replace the GPU damage with the new set of + trapezoids. However, if any partial damage remains then the next + operation which is often to composite another layer of trapezoids (for + complex clipmasks) using IN will then stall. + + This fixes a regression in firefox-fishbowl (and lesser regressions + throughout the cairo-traces). + + Signed-off-by: Chris Wilson + +commit 0229841c0d705138d6317a22ba80f4fa10d26acc +Author: Chris Wilson +Date: Sun Jan 8 01:46:24 2012 +0000 + + sna: Do not upload an untiled GPU bo if we already have a CPU bo + + Continuing the tuning for sna_copy_boxes. + + Signed-off-by: Chris Wilson + +commit 42eb9b7c4b55b620d9652ad3a54c8ab0a76fd7c2 +Author: Chris Wilson +Date: Sun Jan 8 00:21:26 2012 +0000 + + sna: Trim usage of vmapping + + The first, and likely only, goal is to support SHMPixmap efficiently + (and without compromising SHMImage!) which we want to preserve as vmaps + and never create a GPU bo. For all other use cases, we will want to + create snoopable CPU bo ala the LLC buffers on SandyBridge. + + Signed-off-by: Chris Wilson + +commit e52f0204939924181480feec6d1511259169c8f1 +Author: Chris Wilson +Date: Sun Jan 8 00:20:11 2012 +0000 + + sna: Do not move-to-gpu for sna_copy_boxes if we have a cpu bo + + We trade-off the extra copy in the hope that as we haven't used the GPU + bo before then, we won't need it again. + + Signed-off-by: Chris Wilson + +commit c05e90aa99c093431a74a94ceba27d7dce49d05b +Author: Chris Wilson +Date: Sat Jan 7 18:23:43 2012 +0000 + + sna: Missing chunks from last commit + + And update the check for reusing the blit! + + Signed-off-by: Chris Wilson + +commit 292aebfcdc042b08d3a5a21f839e6aec1175359e +Author: Chris Wilson +Date: Sat Jan 7 18:09:47 2012 +0000 + + sna: Prevent reuse of scanlines after the buffer is destroyed + + Once the buffer is destroyed, it may be reallocated with a new pitch. We + could track handle and pitch, but it is easier to simply restart the + blit after the buffer is freed. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44277 + References: https://bugs.freedesktop.org/show_bug.cgi?id=44555 + Signed-off-by: Chris Wilson + +commit d7d07d1df3ffc889ccc32c2ed44ce374e37f851d +Author: Chris Wilson +Date: Sat Jan 7 10:37:01 2012 +0000 + + sna: Pad upload buffers to ensure there are an even number of rows + + One restriction common to all generations is that samplers access pairs + of rows and so we need to pad the buffer to accommodate access to that + second row. Do so unconditionally along paths that may be used by the + render pipeline. + + Signed-off-by: Chris Wilson + +commit e2ad0f6272c776939499c6202fb60bdcc2e955fa +Author: Chris Wilson +Date: Fri Jan 6 17:11:00 2012 +0000 + + sna/blt: Amalgamate many PolyFillRect of single boxes + + Signed-off-by: Chris Wilson + +commit c085de905c30cb5bae6b339841badf1e105c6ee6 +Author: Chris Wilson +Date: Fri Jan 6 15:47:47 2012 +0000 + + sna: Also mark a bo created by force-to-gpu as being all-damaged + + Similar to the action taken into move-to-gpu so that we forgo the + overhead of damage tracking when the initial act of creation is on the + render paths. + + Signed-off-by: Chris Wilson + +commit 9f1935bb4e894264053d94e53c99d5ad607700fb +Author: Chris Wilson +Date: Fri Jan 6 15:26:11 2012 +0000 + + sna: Support performing alpha-fixup on the source + + By inlining the swizzling of the alpha-channel we can support BLT copies + from an alpha-less pixmap to an alpha-destination. + + Signed-off-by: Chris Wilson + +commit 141001df6c9c3485c500ed531a214c09b46c1d3b +Author: Chris Wilson +Date: Fri Jan 6 13:35:27 2012 +0000 + + sna: always skip active search when requested for find an inactive bo + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44504 + Signed-off-by: Chris Wilson + +commit eac0d9652b2399f8c36ba0288db6fe347ed78dc9 +Author: Chris Wilson +Date: Fri Jan 6 12:39:49 2012 +0000 + + sna: Optimise sna_poly_segment() for the frequent no-op case + + Strange as it may seem... But the principle of doing less work with + greater locality should help everywhere, just not as noticeable when + real work is performed. + + Signed-off-by: Chris Wilson + +commit a3699fff5ada85e4dea739aade25ebbb728e18f4 +Author: Chris Wilson +Date: Fri Jan 6 12:15:46 2012 +0000 + + sna: Only force a pipeline flush for a change of destination, not sources + + Signed-off-by: Chris Wilson + +commit 2fefee6015ed2df52c8513ae180ca83c01ff83c0 +Author: Chris Wilson +Date: Fri Jan 6 12:10:27 2012 +0000 + + sna/gen6: Reuse current no-blending setup for PictOpClear + + Signed-off-by: Chris Wilson + +commit 800ca0b4d1194544fe2461f91cbdc632c4d3dd7a +Author: Chris Wilson +Date: Fri Jan 6 12:00:43 2012 +0000 + + sna/gen6: Tidy emission of CC state (blending) + + Signed-off-by: Chris Wilson + +commit b9c9e9970cdb542173e3ed0da2bef614abedd3f7 +Author: Chris Wilson +Date: Fri Jan 6 11:38:31 2012 +0000 + + sna/trapezoids: Add debug markers for move-to-cpu + + Signed-off-by: Chris Wilson + +commit 2841c5fee79c42bca3e098ec620755d341b6888f +Author: Chris Wilson +Date: Fri Jan 6 11:32:54 2012 +0000 + + sna: fast path move-to-cpu of an all-damaged CPU bo + + When the bo is already completely damaged on the CPU, all we need to do + is to sync with the CPU bo. + + Signed-off-by: Chris Wilson + +commit 07f1724ba5759772043fc4c5d1163ddd640004c2 +Author: Chris Wilson +Date: Fri Jan 6 11:00:38 2012 +0000 + + sna: Pass the real destination pixmap to sna_write_boxes() + + Faking it for the render upload simply isn't good enough, since we need + the correct drawrect. + + Signed-off-by: Chris Wilson + +commit 5c2e9a98715eeddd8dfdff9fe3871bde659484cc +Author: Chris Wilson +Date: Fri Jan 6 02:26:39 2012 +0000 + + sna/trapezoids: Use a slightly faster miTrapezoidBounds() + + Signed-off-by: Chris Wilson + +commit 75f61678249018c84872c61b4609ba9d3d0d73dc +Author: Chris Wilson +Date: Fri Jan 6 01:38:42 2012 +0000 + + sna: Only need to remove the pixmap from the dirty CPU list when clearing damage + + Signed-off-by: Chris Wilson + +commit 86cc2cd3343c16b12e35e2048c113481f49196cf +Author: Chris Wilson +Date: Fri Jan 6 01:31:15 2012 +0000 + + sna: The condition for automatically using the GPU source is no CPU damage + + With no CPU damage to upload, we know that there is no reason not to use + the GPU bo. + + Signed-off-by: Chris Wilson + +commit 69c556c310da544ddb66c2441f5d06dca29fb9f3 +Author: Chris Wilson +Date: Fri Jan 6 00:21:29 2012 +0000 + + sna: Rearrange use-cpu-bo to avoid reducing GPU damage + + If we spot that the region is wholly contained within the CPU damage + initially, we can conclude that is not in the GPU damage without + reduction. + + Signed-off-by: Chris Wilson + +commit 34c4dbe825a45315b05f0bd49539cbcf5de276f1 +Author: Chris Wilson +Date: Thu Jan 5 23:18:37 2012 +0000 + + sna/gen6: Only force BLT if the src and dst overlaps for self-copy + + Signed-off-by: Chris Wilson + +commit fc79af7a4abf1f0ceccacf23e8467ee2872eec09 +Author: Chris Wilson +Date: Thu Jan 5 23:06:17 2012 +0000 + + sna: Only force a batch continuation if the scanout is written to + + Signed-off-by: Chris Wilson + +commit c16c16d2553aa9a8bf9b0b0b367715b59020a357 +Author: Chris Wilson +Date: Thu Jan 5 22:51:55 2012 +0000 + + sna/gen6: Enable reuse of source Picture + + Check if the source and mask are identical pictures and just copy the + source channel to the mask in that case. + + Signed-off-by: Chris Wilson + +commit f642b08870c6d7686368e053962075c153f76f86 +Author: Chris Wilson +Date: Thu Jan 5 22:26:09 2012 +0000 + + sna: Quickly handle the common case of using a CPU source pixmap + + For the common case (at least with llc bo) where we are immediately + using an uploaded image from its linear buffer, check upfront before + computing the sampled region for transfer to the GPU. + + Signed-off-by: Chris Wilson + +commit 8a9baa59e9d0c0761b82f23734514f6847a9bcc1 +Author: Chris Wilson +Date: Thu Jan 5 22:16:31 2012 +0000 + + sna: Quickly handle the common case of using a GPU source pixmap + + For the common case of glyphs, the pixmap is entirely on the GPU which + can be quickly tested before performing the more complex transformations + to determine how much pixel data we need to upload. + + Signed-off-by: Chris Wilson + +commit d4dad6e3723d70d78247f29f86079862af175266 +Author: Chris Wilson +Date: Thu Jan 5 21:39:24 2012 +0000 + + sna: Check that the GTT is no longer mapped before ensuring the shadow pointer + + Signed-off-by: Chris Wilson + +commit 352f0a3ffb8ae8503bb2fab779ea84f4e6d76317 +Author: Chris Wilson +Date: Thu Jan 5 21:33:26 2012 +0000 + + sna: Only mark the pixmap as GTT mapped if the private owns the pixels + + Signed-off-by: Chris Wilson + +commit 3061382f98c0b284c250c1a36f7a4fee22046664 +Author: Chris Wilson +Date: Thu Jan 5 21:05:52 2012 +0000 + + sna: Make sure that we do not attach to SHM pixmaps in ignorance + + Without xserver support for notification of when scratch pixmaps are + reused, we simply cannot attach our privates to them lest we cause + corruption with SHM pixmaps. + + This is a recent regression back unto an old, old xserver issue. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44503 + Signed-off-by: Chris Wilson + +commit f7431726338e72d7a989e838f48aecdab15ab366 +Author: Chris Wilson +Date: Thu Jan 5 20:26:30 2012 +0000 + + sna: Add more debugging to use-gpu-bo + + To aide debugging in conjunction with compositors and their crazy + offsets. + + Signed-off-by: Chris Wilson + +commit 53c943b551b86402067ea96cd9fcca2848e84387 +Author: Chris Wilson +Date: Thu Jan 5 18:41:26 2012 +0000 + + sna: Check for usable pixmap before deference its private + + Beware the NULL pointer and early deference. + + Signed-off-by: Chris Wilson + +commit 307276d7da99ceb84c175e412452e5d86d615cf4 +Author: Chris Wilson +Date: Thu Jan 5 14:26:05 2012 +0000 + + sna: Enable using the render pipeline for uploads to Y-tiled pixmaps + + Signed-off-by: Chris Wilson + +commit f9451aaa39e1d77b08d2201f5c4a44ab834f2237 +Author: Chris Wilson +Date: Thu Jan 5 14:22:21 2012 +0000 + + sna: Mark the upload as having acquired the GTT mapping + + In order for the entire PutImage to be performed inplace, we need to + maintain the tendency to keep doing inplace operations. This hint is + provided by tracking whether or not the last operation used the GTT + mapping. However, that hint was not being provided by zpixmap_blt. + + Signed-off-by: Chris Wilson + +commit ce93c00a33a395986ffc0d33aae85d2c23aabc5d +Author: Chris Wilson +Date: Thu Jan 5 14:20:55 2012 +0000 + + sna: Avoid operating inplace if we have pending CPU damage + + If the operation does not replace existing CPU damage, we are likely to + want to reuse the pixmap again on the CPU, so avoid mixing CPU/GPU + operations. + + Signed-off-by: Chris Wilson + +commit f5d02d90f3349f33341954fc55824d12a7829e6c +Author: Chris Wilson +Date: Thu Jan 5 12:56:21 2012 +0000 + + sna: Avoid switching rings for uploading data + + On systems that incur painful overhead for ring switches, it is usually + better to create a large buffer and perform a sparse copy on the same + ring than create a compact buffer and use the BLT. + + Signed-off-by: Chris Wilson + +commit a42111ff94911d5fad34e6dbac8aa4a11b2d8032 +Author: Chris Wilson +Date: Thu Jan 5 12:12:22 2012 +0000 + + sna/trapezoids: Try creating the trapezoids mask inplace if not using spans + + Signed-off-by: Chris Wilson + +commit 4c6ccbd46a1681c73382b79a0246f7d8cb097606 +Author: Chris Wilson +Date: Thu Jan 5 11:09:01 2012 +0000 + + sna: Throttle, throttle, throttle. + + This reverts 281425551bdab7eb38ae167a3205b14ae3599c49 as it was causing + insufferable lag in firefox. + + Signed-off-by: Chris Wilson + +commit dbb495c3aeef34eab2aabfdfaafb81facdea4100 +Author: Chris Wilson +Date: Thu Jan 5 10:34:08 2012 +0000 + + sna: Attach to the pixmap for source counting when deferring uploads + + If we decide to defer the upload for this instance of the source pixmap, + mark it so. Then if we do use it again we will upload it to a GPU bo and + hopefully reuse those pixels. + + Signed-off-by: Chris Wilson + +commit 292097590ba0f81b7505aedb2a4fbd18021641a5 +Author: Chris Wilson +Date: Thu Jan 5 10:31:15 2012 +0000 + + sna: Try doing a cheap is-contained check before reducing damage + + If the pixmap is entirely within the current CPU damage, we can forgo + reducing either the GPU or CPU damage when checking whether we need to + upload dirty pixels for a source texture. + + Signed-off-by: Chris Wilson + +commit 5ddae8bf21067e7d2a031a6b9020c02ab977cfed +Author: Chris Wilson +Date: Thu Jan 5 10:27:37 2012 +0000 + + sna: Check the composite-rectangles will be on the GPU before forcibly attaching + + If we think that the operation is better performed on the CPU, avoid the + overhead of manipulating our privates. + + Signed-off-by: Chris Wilson + +commit 6ffd3605640bacaf0d744075622463aacf78d797 +Author: Chris Wilson +Date: Thu Jan 5 10:25:12 2012 +0000 + + sna: Deferred attachment to a pixmap needs to mark the pixmap as entirely dirty + + As demonstrated with oversized glyphs and a chain of catastrophy, when + attaching our private to a pixmap after creation we need to mark the + entire CPU pixmap as dirty as we never tracked exactly which bits were + dirtied. + + Signed-off-by: Chris Wilson + +commit a09ebe0b6cc66d08e52b57851d9b8a6a1f71df2b +Author: Chris Wilson +Date: Thu Jan 5 10:23:25 2012 +0000 + + sna: Immediately upload oversized glyphs + + Glyphs, even large ones, we suspect will be reused and so the deferred + upload is counterproductive. Upload them immediately and mark them as + special creatures for later debugging. + + Signed-off-by: Chris Wilson + +commit 797b27365dc09a3f84349a33cffbfdc67cba0baa +Author: Chris Wilson +Date: Thu Jan 5 10:30:47 2012 +0000 + + sna: Don't perform a deferred attachment for vmapping if not supported + + Signed-off-by: Chris Wilson + +commit 23e3959e1f603c3ba0bd4f01128290241cf93edf +Author: Chris Wilson +Date: Thu Jan 5 04:00:32 2012 +0000 + + sna: Use the created cpu-bo for upload and download + + As we explicitly create CPU bo when wanted, we no longer desire to + spontaneously create vmaps for simply uploading to the GPU bo. + + Signed-off-by: Chris Wilson + +commit 4530b87e445aea30ccbe751699963118ad5672d4 +Author: Chris Wilson +Date: Thu Jan 5 00:01:27 2012 +0000 + + sna: Fix assertion as we may want to create active bo with cpu mappings + + Signed-off-by: Chris Wilson + +commit 4119e68fb157fc612bce5e9c5669112ce35b4ca1 +Author: Chris Wilson +Date: Wed Jan 4 19:35:30 2012 +0000 + + sna/damage: Fix reduction to copy the boxes correctly + + We need to be carefully to copy the boxes in a strict lifo order so as + to avoid overwritting the last boxes when reusing the array allocations. + + Signed-off-by: Chris Wilson + +commit 71b0924b586d9a60397e92e941e3d0cfa636ee61 +Author: Chris Wilson +Date: Wed Jan 4 19:34:41 2012 +0000 + + sna: Mark tiny CPU pixmaps as completely dirty + + Avoid the overhead of tracking damage on small pixmaps when using CPU + rasterisation; the extra cost of sending the whole pixmap compared to + the damage is negligble should it ever be required on the GPU. + + Signed-off-by: Chris Wilson + +commit fc14e63256a9b756c7c77ffe73f2f13784396c5a +Author: Chris Wilson +Date: Wed Jan 4 19:33:30 2012 +0000 + + sna: Only request page size allocations for the replacement buffer + + A precondition on bo creation is that the size must be page aligned. + + Signed-off-by: Chris Wilson + +commit 89739b711f42c3dbed7d3f4e6da0cdd61a5205ae +Author: Chris Wilson +Date: Wed Jan 4 17:41:16 2012 +0000 + + sna: Expand small stipples into 8x8 patterns + + Signed-off-by: Chris Wilson + +commit 878fbfe509da0a25dff8515d6d3b38ca3826466e +Author: Chris Wilson +Date: Wed Jan 4 16:56:55 2012 +0000 + + sna: Align tiled stipple uploads with the stipple pixmap correctly + + Signed-off-by: Chris Wilson + +commit 28a222a66bb450c7f6d61aef16fe73332854c8ce +Author: Chris Wilson +Date: Wed Jan 4 12:48:25 2012 +0000 + + sna: Always prefer to use cacheable operations after the GPU is wedged + + As rasterisation will be performed upon the CPU we need to avoid the + readbacks form uncached memory and so we should restrict ourselves to + only create further damage within the CPU pixmap. + + Signed-off-by: Chris Wilson + +commit 99ff83a3bebf1aa25c44a87f2c344307d20bc062 +Author: Chris Wilson +Date: Wed Jan 4 12:35:12 2012 +0000 + + sna: Prevent creation of bo purely for GTT mapping when wedged + + Signed-off-by: Chris Wilson + +commit a7c35fa4c3155d10ad75ac33aefb03dafa010aba +Author: Chris Wilson +Date: Wed Jan 4 12:33:09 2012 +0000 + + sna: Only allow mappable pixmaps to be mapped + + If we did not allocate the pixel data, such as for wedged pixmaps or + scratch buffers, then we cannot perform the pointer dance nor do we want + to create the GPU buffer. + + Signed-off-by: Chris Wilson + +commit 2cbc97d28aae138566e49df05e16d274b533ea86 +Author: Chris Wilson +Date: Wed Jan 4 12:32:06 2012 +0000 + + sna: Force creation of ordinary pixmaps when wedged. + + If the pixmap was intended for scanout, then the GPU bo will be created + upon attachment to the fb. + + Signed-off-by: Chris Wilson + +commit f6cc73ba66f34d190b7c17421a62aa1256698431 +Author: Chris Wilson +Date: Wed Jan 4 12:56:31 2012 +0000 + + sna: The batch is counted in dwords, not bytes! + + Yikes, I choose the wrong units for the max_batch_size. + + Signed-off-by: Chris Wilson + +commit 227fbb90c4884bbc58c6c0cfff9663ec9ca54171 +Author: Chris Wilson +Date: Wed Jan 4 11:47:32 2012 +0000 + + sna: Carefully free the freed_pixmap upon exit + + As the contents of the pixmap are now rubbish, we need to manually + destroy it rather than pass it to the normal sna_pixmap_destroy() + routines. + + Signed-off-by: Chris Wilson + +commit 0ed758cd2176ee4f34e03d05d05130d52d75e577 +Author: Chris Wilson +Date: Wed Jan 4 12:18:20 2012 +0000 + + sna: Limit batch to a single page on 865g + + Verified on real hw, this undocumented (at least in the bspec before me) + bug truly exists. + + Signed-off-by: Chris Wilson + +commit 3449f1cbe184a618e662d2a662167f05362b82e5 +Author: Chris Wilson +Date: Wed Jan 4 02:38:16 2012 +0000 + + sna: Guard against NULL damage deref + + The fast version of damage checking assumes that the damage has already + been determined to be non-NULL, so make sure it is. + + Signed-off-by: Chris Wilson + +commit 04a6260016fb5ebefc1056ed6acf5001ec535d5c +Author: Chris Wilson +Date: Wed Jan 4 01:14:19 2012 +0000 + + sna: Fix typo during partial list deletion + + And keep the asserts that lead to its discovery. + + Signed-off-by: Chris Wilson + +commit f1dc1eadd84097fc691e85c636535ceeeb601a18 +Author: Chris Wilson +Date: Wed Jan 4 00:09:30 2012 +0000 + + sna/gen3: Remove incorrect premultiplication of solid component-alpha mask + + Signed-off-by: Chris Wilson + +commit 8cb9b8d7d7a1eb62eb3b20e6a50d3f1c9bde40c1 +Author: Chris Wilson +Date: Tue Jan 3 23:13:24 2012 +0000 + + sna: Discard mask and source for PictOpClear + + Signed-off-by: Chris Wilson + +commit feb75c55d6105a9ecc5f5ec7830276d1654918b9 +Author: Zhigang Gong +Date: Sat Dec 31 21:18:15 2011 +0800 + + uxa/glamor: Route some missing drawing function to glamor + + We have to route all the drawing function to glamor first, when + glamor is enabled. This adds a few more functions that were previously + just falling back to swrast and passes them to glamor instead. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit f4ea732d7181d4ef7f97fb2585e87cdcaef99d46 +Author: Zhigang Gong +Date: Tue Dec 27 17:09:17 2011 +0800 + + uxa/glamor: Let glamor do the GC validation + + If we are using GLAMOR, then a tile pixmap or stipple pixmap + may be pure glamor pixmap and thus UXA will not know how to + render to them, and we need to let glamor do the validation. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit e8aa9cedbfca09e22d46ec8882b9bebb3eb83022 +Author: Zhigang Gong +Date: Tue Dec 27 17:09:16 2011 +0800 + + uxa/glamor: Remove extraneous flush + + When glamor is enabled, a pixmap will not be accessed by UXA's + accelerated functions. Only unaccelerated functions may access those + pixmaps, and before each unaccelerated rendering, it calls + uxa_prepare_access which will do a glFlush. Combined with a flush before + sending to DRI clients, we no longer need to flush after every + operation. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit 4ca94ed91fab7a9de5eed1053b891e8420cdf43d +Author: Zhigang Gong +Date: Tue Dec 27 17:09:15 2011 +0800 + + uxa/glamor: Remove dead code. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit 5576afc7d12ec0f028e416f4b4a076fc6d3c29d9 +Author: Chris Wilson +Date: Tue Jan 3 16:48:52 2012 +0000 + + sna: Inline checks for over-sized buffers during pixmap creation + + Make the tests for acceptable GPU pixmaps explicit and upfront. + + Signed-off-by: Chris Wilson + +commit b2dc17678fa3a548be61e1055d4d321dbd6494c3 +Author: Chris Wilson +Date: Tue Jan 3 15:50:21 2012 +0000 + + sna: Always search for an exact active match first from the bo-cache + + And accept second-best only if permitted by flags. + + Signed-off-by: Chris Wilson + +commit caf41ae23d263c7baed6b23a80693690c4dfe563 +Author: Chris Wilson +Date: Tue Jan 3 15:11:13 2012 +0000 + + sna: Force tiling on medium pitches if not reduced for other reasons + + Signed-off-by: Chris Wilson + +commit 1b688ca0cfc1e623f896e60a6a6abf724d57efb4 +Author: Chris Wilson +Date: Tue Jan 3 14:18:05 2012 +0000 + + sna: Delete the last buffer if destroyed without being used on the GPU + + Signed-off-by: Chris Wilson + +commit 4a68e7277104d7dccbdc4739eb5651902b9ccc20 +Author: Chris Wilson +Date: Tue Jan 3 12:19:24 2012 +0000 + + sna/gen3: Prefer to use the blitter for solid fills + + Signed-off-by: Chris Wilson + +commit 199e357dc693cfe232464e4faa82d9223a8325d6 +Author: Chris Wilson +Date: Tue Jan 3 12:16:48 2012 +0000 + + sna/trapezoids: Pass the sna pointer to the callees + + Avoid the repeated multiple indirect dereferences. + + Signed-off-by: Chris Wilson + +commit bd7aa1754dcf9d58d7deb92d99da9b78c91a0eb2 +Author: Chris Wilson +Date: Tue Jan 3 12:46:40 2012 +0000 + + sna: Avoid unnecessary call overhead for read-only move-to-cpu + + Signed-off-by: Chris Wilson + +commit 294c8791c435acf5933109fbcab85623a55b2c6c +Author: Chris Wilson +Date: Tue Jan 3 12:09:51 2012 +0000 + + sna: Use a cheaper no-reduction damage check for simply discarding further damage + + Signed-off-by: Chris Wilson + +commit 7ff42e9c83cdb17660a64901497704b38032af8c +Author: Chris Wilson +Date: Tue Jan 3 19:15:07 2012 +0000 + + sna/damage: Mark the box as packed so that the embedded_box is aligned correctly + + valgrind was complaining about an overlapping memcpy on a 64-bit + platform as gcc padded the sna_damage_box to 28 bytes... + + Signed-off-by: Chris Wilson + +commit 4652a20de5fee0d5d1a8baadc4a93b6a93525564 +Author: Chris Wilson +Date: Tue Jan 3 21:20:09 2012 +0000 + + sna/gen3: Check for a non-NULL bo before incrementing its ref in reuse_source() + + For gen3, we may reduce a source into a constant operator and so + dispense with keeping a bo. When duplicated into the mask channel, we + then need to be careful not to dereference the NULL pointer. + + Signed-off-by: Chris Wilson + +commit 777fcc9b11e8cbfe942aa6bf898749f552acb3cf +Author: Chris Wilson +Date: Sun Jan 1 16:03:42 2012 +0000 + + sna: Prefer not to force the creation of gpu bo for pixmap uploads + + As this causes a significant regression when benchmarking firefox on SNB + with firefox-planet-gnome if we already have CPU buffers. + + Signed-off-by: Chris Wilson + +commit 1a6c16a24cb74f82df9757c034c50f2cf141523f +Author: Chris Wilson +Date: Sun Jan 1 14:32:48 2012 +0000 + + sna: Keep a freelist of buffers + + As reallocation of bo is the most frequent cause of malloc/free. + + Signed-off-by: Chris Wilson + +commit f008a2a90c632d843f07846426f6d14af728c13b +Author: Chris Wilson +Date: Sun Jan 1 10:24:49 2012 +0000 + + sna: Tune blt routine + + Signed-off-by: Chris Wilson + +commit b57c7248acc2ad6a51b7eac74449d155defc998f +Author: Chris Wilson +Date: Sun Jan 1 14:10:20 2012 +0000 + + sna: Delete some redundant code + + Signed-off-by: Chris Wilson + +commit 83d16455b70e2f0348e51f95128d4fcae3736e7f +Author: Chris Wilson +Date: Sun Jan 1 13:58:44 2012 +0000 + + sna: Eliminate one union pass when reducing damage-add + + Signed-off-by: Chris Wilson + +commit 2f5b769e7144c7b85010429e6d8aebf9c9fc1628 +Author: Chris Wilson +Date: Sun Jan 1 10:00:37 2012 +0000 + + sna: Move some checks against programming errors to asserts + + Signed-off-by: Chris Wilson + +commit 24bf59c43fbedd9d85c913ac3c7f0e752c232eb4 +Author: Chris Wilson +Date: Sat Dec 31 18:57:57 2011 +0000 + + Revert "sna: Increase the minimum alignment constraint for g33" + + This reverts commit 2934e778f01cdf1307732b248b11a31c0e79e866. The actual + cause of the bug I was seeing on my PNV box turned out to be + a1f585a3d0a, so time to reinvestigate the alignment issues. + +commit 770a953ff03bb8328c3f29e274d225528840f30c +Author: Chris Wilson +Date: Sat Dec 31 17:19:08 2011 +0000 + + uxa/video: Clear all state structures before uploading + + A regression from eb859f644633e left some of the state uninitialised + before uploading to the GPU leading to undefined behaviour. + + Reported-by: Alexey Shumitsky + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44338 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44252 + Signed-off-by: Chris Wilson + +commit f1995c684d2e074ae04c9e42727e59cc77e16104 +Author: Chris Wilson +Date: Sat Dec 31 15:57:32 2011 +0000 + + uxa: the video destination should be in the render write domain + + Signed-off-by: Chris Wilson + +commit 511146d2e40e267f74e18c0dd06b65f5d6a69f5d +Author: Chris Wilson +Date: Sat Dec 31 13:27:13 2011 +0000 + + sna: Implement inplace trapezoidal addition (for clipmasks) + + Signed-off-by: Chris Wilson + +commit a1f585a3d0ae72e896684f62960a9ae96dc259f5 +Author: Chris Wilson +Date: Sat Dec 31 12:43:04 2011 +0000 + + sna: Update pixmap->devKind for GTT mappings + + Signed-off-by: Chris Wilson + +commit 343de19ef98eea016601dbbe2d1f601dbff9de20 +Author: Chris Wilson +Date: Sat Dec 31 11:19:44 2011 +0000 + + sna: Implement tiled uploads for small stipples larger than patterns + + Signed-off-by: Chris Wilson + +commit fb15cf2294da20bfc375ae62443b822770850316 +Author: Chris Wilson +Date: Sat Dec 31 10:24:58 2011 +0000 + + sna: Make sure the shadow pixmap is suitable for scanout + + Signed-off-by: Chris Wilson + +commit 281425551bdab7eb38ae167a3205b14ae3599c49 +Author: Chris Wilson +Date: Sat Dec 31 10:10:00 2011 +0000 + + sna: Tweak throttling to be run before going idle + + The goal is to avoid introducing extra latency in the middle of a + command sequence and to delay it until we have to wait for the clients. + + Signed-off-by: Chris Wilson + +commit 2f5448f1329f344702e4e29b2509d7190677bbf0 +Author: Chris Wilson +Date: Fri Dec 30 22:13:05 2011 +0000 + + sna: compare tiling against minimum width for relevancy + + Signed-off-by: Chris Wilson + +commit e82b3d8069629ae5776e039d6ea1f3c901a3a094 +Author: Chris Wilson +Date: Fri Dec 30 09:16:00 2011 +0000 + + sna: Defer the initial source upload if the GPU bo will be untiled + + Signed-off-by: Chris Wilson + +commit 72624b0b5ba6549cb8d96f992d2656a28ec6078c +Author: Chris Wilson +Date: Thu Dec 29 22:43:35 2011 +0000 + + sna: Remove redundant use-gpu-bo clause + + Signed-off-by: Chris Wilson + +commit 6dc9bbc0161f071bbaf5c7e379974158a5ad666f +Author: Chris Wilson +Date: Thu Dec 29 22:43:44 2011 +0000 + + sna: Fix DBG for no intersection with damage + + Signed-off-by: Chris Wilson + +commit 0dc5c0651cb691fb8811cdf3075b3d322f9d37f8 +Author: Chris Wilson +Date: Thu Dec 29 13:49:23 2011 +0000 + + sna: Tune disarming of the scanout flush timer + + Signed-off-by: Chris Wilson + +commit ccd895c61d9f409a36c70eaf02d7ab43cc6c03c2 +Author: Chris Wilson +Date: Thu Dec 29 12:09:04 2011 +0000 + + sna: Allow uploading inplace to a freshly created GPU bo + + If the operation is favoured to be performed using a WC upload, presume + that we will use the uploaded pixmap on the GPU and so prefer to create + a GPU buffer to hold the fresh data. + + Signed-off-by: Chris Wilson + +commit f85a853455249fd782e907ce1d78d11f75362def +Author: Chris Wilson +Date: Thu Dec 29 11:59:57 2011 +0000 + + sna: Only update the damage region as necesary for contains-box + + Signed-off-by: Chris Wilson + +commit f53936407bd68f3d36ab525b4e0531fad58098e3 +Author: Chris Wilson +Date: Thu Dec 29 11:59:37 2011 +0000 + + sna: Reset the source counter upon dirtying the shadow pixmap + + Signed-off-by: Chris Wilson + +commit c9f7f10bc528ac783f4e89bdb36fc56ccdcd0088 +Author: Chris Wilson +Date: Thu Dec 29 09:03:21 2011 +0000 + + sna: Be paranoid and check for errors from mmapping the bo + + Now that the error propagation is actually in place, we may as well use + it. + + Signed-off-by: Chris Wilson + +commit 98e053503aed292beb2006043e8508d59262c7c2 +Author: Chris Wilson +Date: Thu Dec 29 08:50:53 2011 +0000 + + uxa: Depend upon DRI2 not DRI + + The symbols required for building intel_dri.c are checked during + configure under the DRI2 defines. + + Signed-off-by: Chris Wilson + +commit 58cee9d0def82d19f03c840325b6e84c20e77ace +Author: Chris Wilson +Date: Wed Dec 28 22:52:58 2011 +0000 + + sna/dri: Update set_bo() for change of bo ownership transfer during page-flip + + Signed-off-by: Chris Wilson + +commit f9ee02be269d1658d3a8a5166e9bd2a49ab6dea0 +Author: Chris Wilson +Date: Wed Dec 28 22:52:44 2011 +0000 + + sna: Fix debug message for read-boxes + + Signed-off-by: Chris Wilson + +commit 698bd43e0f7a59bcce6601b0c96df85935e54bb3 +Author: Chris Wilson +Date: Wed Dec 28 21:45:12 2011 +0000 + + sna: Do not create glyph caches if the gpu is wedged + + As these will only be created in normal memory and never used. + + Signed-off-by: Chris Wilson + +commit 78425a15597079c0549de0fa1bbbdbebcf9eaf28 +Author: Chris Wilson +Date: Wed Dec 28 15:26:14 2011 +0000 + + sna: Refactor common code for testing gpu busyness of a pixmap + + Signed-off-by: Chris Wilson + +commit 9105b7e03ab7e3602c7200ebdc44e89f873afe1f +Author: Chris Wilson +Date: Wed Dec 28 13:46:18 2011 +0000 + + sna: Perform clip mask compositing inplace + + Avoid the extra composite-in pass for simple clipmask construction. + + Signed-off-by: Chris Wilson + +commit a5583165da0d2ae5eb1e5a2e11ee6e245d4b5aa4 +Author: Chris Wilson +Date: Wed Dec 28 13:57:09 2011 +0000 + + uxa: Remove concept of global FB ownership made obsolete by GEM and KMS + + With the introduction of GEM, we can continue to submit batch buffers + irrespective of ownership of the console, so do so. + + Signed-off-by: Chris Wilson + +commit 337635ab97bbfc9b4455eadb63214783bb90bb2b +Author: Chris Wilson +Date: Wed Dec 28 10:56:57 2011 +0000 + + sna: Add some more debugging to find the source of a read-boxes error + + Signed-off-by: Chris Wilson + +commit 3bf81241cbc97763e5f3cbc82772437ccbff5a6c +Author: Chris Wilson +Date: Tue Dec 27 17:09:59 2011 +0000 + + sna: Skip zero-sized glyphs + + Similar to the empty glyphs make sure that we just advance by the + character width without drawing anything. + + Signed-off-by: Chris Wilson + +commit 8fc21328a0bdf87fde35d68d2b27834011acde7b +Author: Chris Wilson +Date: Tue Dec 27 15:26:46 2011 +0000 + + sna: Don't discard empty glyphs, just skip them + + A space is encoded as a 1x1 blank glyph, but we still need to advance by + its character width and so we cannot simply discard the glyph. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44091id=44091 + Signed-off-by: Chris Wilson + +commit 726290ea2a54716d3d8fb998fe7d2ab252421de7 +Author: Chris Wilson +Date: Tue Dec 27 13:16:34 2011 +0000 + + sna: Rearrange damage for tail-call optimisations + + Signed-off-by: Chris Wilson + +commit 04396b6e5039c0cd1ac655a8a9afe88bb8a1ebde +Author: Chris Wilson +Date: Tue Dec 27 09:58:40 2011 +0000 + + sna: Don't force the creation of a GPU bo if it will be untiled + + Signed-off-by: Chris Wilson + +commit 655a96cd5f12ff7fe593e7da5f34c7c92ef9b87d +Author: Chris Wilson +Date: Mon Dec 26 14:37:37 2011 +0000 + + sna: Mark the glyph cache as being unpageable + + In order to prevent it falling foul of the inactive pixmap reaper, we + need to mark the pixmap as pinned. + + Signed-off-by: Chris Wilson + +commit 2934e778f01cdf1307732b248b11a31c0e79e866 +Author: Chris Wilson +Date: Mon Dec 26 11:30:39 2011 +0000 + + sna: Increase the minimum alignment constraint for g33 + + Still not getting the single-stream mode that I am aiming for! + + Reported-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44150 + Signed-off-by: Chris Wilson + +commit f7593a995a829978ce81397dde5c9ea6f9bb7681 +Author: Chris Wilson +Date: Sun Dec 25 09:40:46 2011 +0000 + + sna: Move the is-mappable check into the callers of region_inplace() + + As they slightly differ in their requirements. + + Signed-off-by: Chris Wilson + +commit aff32e3e08fce3c7b8dab3a25c96d69c409471fc +Author: Chris Wilson +Date: Sun Dec 25 00:36:33 2011 +0000 + + sna: Tweak damage not to reduce if it will not affect the outcome of reducing to all + + Signed-off-by: Chris Wilson + +commit be21a09fef0a3499153f2c123b65f1d5c872d437 +Author: Chris Wilson +Date: Sun Dec 25 00:28:55 2011 +0000 + + sna: Only call move-to-gpu on scanout flush if we have cpu damage to move + + Reduce the number of redundant calls. + + Signed-off-by: Chris Wilson + +commit 7b69dc88094ee2bb017364cd4356f3ae69cbc1f1 +Author: Chris Wilson +Date: Sun Dec 25 00:21:21 2011 +0000 + + sna: Inline the common portion of sna_get_pixel_from_rgba() + + The function overhead completely dominates for the common case. + + Signed-off-by: Chris Wilson + +commit b117f65520919f4ba36010cfe913a8c53166bf23 +Author: Chris Wilson +Date: Sat Dec 24 21:03:01 2011 +0000 + + sna: Jump straight to the fallback copy routines if the dst is not attached + + Marginally simplify the convoluted logic for choosing the most + appropriate path and help prevent further errors. + + Signed-off-by: Chris Wilson + +commit 72217790ee2c080d618274456360b481d015e898 +Author: Chris Wilson +Date: Sat Dec 24 19:14:09 2011 +0000 + + sna: Use shadow if the GPU is busy or not immediately mappable + + Signed-off-by: Chris Wilson + +commit 0be136c21f0373d1eb2259b83c598655f4eb841e +Author: Chris Wilson +Date: Sat Dec 24 18:44:15 2011 +0000 + + sna: use indirect uploads if the bo was last known to be unmappable + + Signed-off-by: Chris Wilson + +commit e764a52ee8f0c552e218b3110318be9ba06634ae +Author: Chris Wilson +Date: Sat Dec 24 15:17:06 2011 +0000 + + sna: Encourage large operations to be migrated to the GPU + + Signed-off-by: Chris Wilson + +commit f9f8535db6a9e3affba9ba2c2a9314dfe12ab270 +Author: Chris Wilson +Date: Sat Dec 24 21:01:39 2011 +0000 + + sna: Fix damage reduction by adding new boxes to the tail of the box list + + Signed-off-by: Chris Wilson + +commit f8c91f229a9ca18fc58b0cabbea595d26627db8b +Author: Chris Wilson +Date: Sat Dec 24 12:17:53 2011 +0000 + + sna: We can always compare the box to be subtracted against the dirty extents + + Signed-off-by: Chris Wilson + +commit cc21d3fa045209861564cf240a9a082e0bdb63f8 +Author: Chris Wilson +Date: Sat Dec 24 12:17:43 2011 +0000 + + sna/damage: Fix the is-contained test + + It was a non-overlapping test which is almost the reverse of what was + intended. + + Signed-off-by: Chris Wilson + +commit b86e4f59299f935d5a0ea8375da97e6fc57571f9 +Author: Chris Wilson +Date: Sat Dec 24 11:45:27 2011 +0000 + + sna: Check that the copy dst is attached before replacing damage + + Signed-off-by: Chris Wilson + +commit 3bcc9f08e1309725c18dfa5ca0e905bb88ebf4ea +Author: Chris Wilson +Date: Sat Dec 24 09:59:24 2011 +0000 + + sna: Create a GPU for a streaming write + + If we are about to do a write-only drawing operation that will exceed + our cache, allocate a GPU bo and perform the operation inplace. + + Signed-off-by: Chris Wilson + +commit efc8d04fc114e9966e5ca00600f9663ecf03a5ca +Author: Chris Wilson +Date: Sat Dec 24 09:32:18 2011 +0000 + + sna: Promote an unattached pixmap to the GPU for inplace copies + + If we would prefer to perform the copy on the GPU and if the pixmap is + virgin, create a GPU bo for the operation. + + Signed-off-by: Chris Wilson + +commit 8c0e7ff5ac996a5a5c0790966084d1c9e1b1f859 +Author: Chris Wilson +Date: Sat Dec 24 09:19:18 2011 +0000 + + sna: Clear the CPU damage for other overwriting rectangular blits as well + + And make the accessing of the sna_pixmap safe -- it may not even exist! + + Signed-off-by: Chris Wilson + +commit 7f9ed3ca56466f319d9ec06aebb7055552fb1fe1 +Author: Chris Wilson +Date: Sat Dec 24 08:57:49 2011 +0000 + + sna: reset the pixmap on the initial clear after being swapped out + + Pixmaps are swapped out into the CPU after a period of inactivity. This + then prevents the core rendering routines from migrating the pixmap back + to the GPU until it gets used again on a Render path. However, we can + clear that CPU damage and enable migration before a number of key steps + in the expose process. + + Signed-off-by: Chris Wilson + +commit 8c987b6ccfa83b99a316a7da49a6d7e30fcdf295 +Author: Chris Wilson +Date: Sat Dec 24 09:09:58 2011 +0000 + + sna: Cheaply reduce damage when subtracting and removing the entire damage + + Signed-off-by: Chris Wilson + +commit 098592ca5d79af2e4bdcd82ee598c4b2ba08df6b +Author: Chris Wilson +Date: Sat Dec 24 02:49:24 2011 +0000 + + sna: Remove the independent tracking of elts from boxes + + Following the switch to a global mode for damage, the elts array became + redundant and all that is required is the list of boxes. + + Signed-off-by: Chris Wilson + +commit 73df0c7ab7c3a9edf0be2439c7e7ab07c0d75ecf +Author: Chris Wilson +Date: Sat Dec 24 02:48:18 2011 +0000 + + sna: Tune region upload inplace threshold + + Signed-off-by: Chris Wilson + +commit ef66c5b5ad221211948ec795ade031591c3f0ac7 +Author: Chris Wilson +Date: Sat Dec 24 00:15:33 2011 +0000 + + sna: Search the inactive VMA cache first for a linear mapping + + Signed-off-by: Chris Wilson + +commit 1cc07fa2d24b10ac95c7a84908290ec06539d447 +Author: Chris Wilson +Date: Fri Dec 23 20:31:21 2011 +0000 + + sna: Avoid forced creation of GPU bo for tiny operations and dirty pixmaps + + Signed-off-by: Chris Wilson + +commit e5bfea5826117bdd29664d83b3d478ff9db29ca3 +Author: Chris Wilson +Date: Fri Dec 23 20:30:58 2011 +0000 + + sna: Discard any GPU damage when overwriting with trapezoids + + Signed-off-by: Chris Wilson + +commit 819dc93e52533afc9b9005db1472672c3d42229f +Author: Chris Wilson +Date: Fri Dec 23 20:29:59 2011 +0000 + + sna/glyphs: Create GPU bo for large enough destination surfaces with glyphs + + Signed-off-by: Chris Wilson + +commit 9580ae8490a4119dac2fefe0085326db350209d7 +Author: Chris Wilson +Date: Fri Dec 23 19:11:43 2011 +0000 + + sna: Pass usage-hint to move-to-gpu + + When simply creating a source GPU bo it is preferrable not to mark it as + all-damaged. + + Signed-off-by: Chris Wilson + +commit 98f15fc61361b7f1e01969f8d4237c13e93e3fb0 +Author: Chris Wilson +Date: Fri Dec 23 17:25:42 2011 +0000 + + sna: Don't align pwrite to cachelines for doing discontiguous copies + + The batch compaction breaks the 1:1 mapping between the cpu buffer and + the bo, so we can no longer safely align the transfer to whole + cachelines. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=44091 + Signed-off-by: Chris Wilson + +commit 3850f4ad48986691e1fb98038ae921deb6c25423 +Author: Chris Wilson +Date: Fri Dec 23 12:42:02 2011 +0000 + + sna: Silence unsigned comparison against 0 + + The good news is if this ever failed, the kernel is far too broken... + + Signed-off-by: Chris Wilson + +commit d9ca113a83177562cde3537bf955164c6950cbd0 +Author: Chris Wilson +Date: Fri Dec 23 10:06:58 2011 +0000 + + sna: Trim the unused pages from the batch between the last command and surface + + Signed-off-by: Chris Wilson + +commit 013eda17e91ff421cd1ef70470e3575f1183fcbd +Author: Chris Wilson +Date: Fri Dec 23 10:40:58 2011 +0000 + + sna: Free the additional bindings on proxies + +commit 84d97bdba02b909369b54de21425ffc9f6ad581a +Author: Chris Wilson +Date: Fri Dec 23 00:01:50 2011 +0000 + + sna/gen2+: Reuse source channel for mask where possible + + GTK+ has a clever trick for premultiplying its images by loading the + same pixel data into both the source and mask, and then performing the + composite. This causes us to upload the same pixel data twice! + + Signed-off-by: Chris Wilson + +commit 281f620573917faef52d9226b12737ce1e2dffdc +Author: Chris Wilson +Date: Thu Dec 22 22:23:41 2011 +0000 + + sna: Age active wholly damaged GPU buffers more slowly + + Signed-off-by: Chris Wilson + +commit f8575b8bd150ae11147fbf6b59171cbbb072dfec +Author: Chris Wilson +Date: Thu Dec 22 22:15:42 2011 +0000 + + sna: Cancel the immediate batch submit once handled in the block handler + + Signed-off-by: Chris Wilson + +commit 609e1d9da282323ab7abc1baad4d3f24ac55588f +Author: Chris Wilson +Date: Thu Dec 22 15:54:39 2011 +0000 + + sna: Bump the inactivity timeout + + With the goal of removing inactive pixmap froms the GPU after 5 minutes + of idleness. + + Signed-off-by: Chris Wilson + +commit 62602209e54c3568795122ee1c902c3b81985303 +Author: Chris Wilson +Date: Thu Dec 22 14:20:20 2011 +0000 + + sna: discard damage-all even for width|height==0 operations + + Even if we don't know the extents of the render operation, if the entire + pixmap is damaged we can still reduce the damage tracking. + + Signed-off-by: Chris Wilson + +commit f68a99a55e1e63d7e76a13a7b77b4bb3f7802b9e +Author: Chris Wilson +Date: Thu Dec 22 15:04:22 2011 +0000 + + sna: Mark fresh GPU only bo as being all damaged + + Presume that we will not fallback and so treat a GPU only bo (one that + is initially created on the GPU) as being all-damaged. This makes future + operations cheaper as the damage tracking overhead is much reduced, and + the cost of the first readback will mainly be in the synchronisation + overhead. + + Signed-off-by: Chris Wilson + +commit 1f2cd536bc712843233de3f5c50802c388d63c72 +Author: Chris Wilson +Date: Thu Dec 22 14:30:04 2011 +0000 + + sna: Reduce damage after complete solid fills + + RenderFillRectangles is often used to initially clear a pixmap after + creation by flooding it with a solid colour, as is PolyRect. We can + reduce further damage operations by checking for this condition. + + Signed-off-by: Chris Wilson + +commit 7a6a2c5d4cc98da76c73152cb7eafcbdb0c088ec +Author: Chris Wilson +Date: Thu Dec 22 13:24:07 2011 +0000 + + sna: Setup the pixmap correctly in order to attach our private + + During creation of sna_pixmap we validate that we can use a GPU bo with + the target pixmap. This fails if we pass in a raw pixmap header, so + make sure the scratch pixmap is fully initialised first. + + Signed-off-by: Chris Wilson + +commit f621b3de841f6037d387ca1439a0abe12ef29811 +Author: Chris Wilson +Date: Thu Dec 22 11:19:45 2011 +0000 + + sna: flatten source alphamaps + + Replace the source picture+alpha with a bo that contains the RGB + channels from source and A from the alpha map. + + Signed-off-by: Chris Wilson + +commit 6c08eb4d6f8789e692ef018e007d1ae97a57c25f +Author: Chris Wilson +Date: Thu Dec 22 11:42:39 2011 +0000 + + sna/gen2+: Prefer to use the CPU if we have a source alphamap and CPU pictures + + Signed-off-by: Chris Wilson + +commit 354dc3c65b9cb86885b6927ee2b80cd2ee6a82ff +Author: Chris Wilson +Date: Wed Dec 21 21:35:06 2011 +0000 + + sna: Avoid fallbacks for convolutions by rendering the convolved texture + + If we have no shader support for generic convolutions, we currently + create the convolved texture using pixman. A multipass accumulation + algorithm can be implemented on top of CompositePicture, so try it! + + Signed-off-by: Chris Wilson + +commit 34cfa15e522ba486d591d37f37d494e399f70354 +Author: Chris Wilson +Date: Wed Dec 21 00:47:47 2011 +0000 + + sna: Drop suggested tiling parameter when creating bo + + The only place where we did anything other than use the default was when + creating a new bo for CopyArea. In that case, basing the choice on the + src GPU bo was not only wrong but a potential segfault. + + Signed-off-by: Chris Wilson + +commit 4d348425592251f49fd31b9259651e8b05e92d1e +Author: Chris Wilson +Date: Tue Dec 20 21:35:58 2011 +0000 + + sna: Intiialise pixmap size before use + + After 0c12f7cb0 we were setting the width/height of the pixmap *after* + trying to use them to determine if the pixmap could be created on the + GPU. Normally this would be corrected when we attempt to render, except + for the core drawing protocol. + + Signed-off-by: Chris Wilson + +commit e71058c9c81067cd72b1193242acbd85272ab73a +Author: Chris Wilson +Date: Tue Dec 20 21:20:48 2011 +0000 + + sna: Always readback untiled bo in place + + We are going to gain no advantage from the kernel detiling the busy + buffer. + + Signed-off-by: Chris Wilson + +commit 6690ff51ec939367051985172a00bf8ed65ac4e3 +Author: Chris Wilson +Date: Tue Dec 20 21:09:01 2011 +0000 + + sna: Treat all exported bo as potentially active + + Don't assume that a read/write will clear the active flag if the bo has + been exported to another DRI client. + + Signed-off-by: Chris Wilson + +commit 743084bbc4c411694190f60cf5161086ada6454f +Author: Chris Wilson +Date: Tue Dec 20 20:42:08 2011 +0000 + + sna: Only upload tiny pixmaps on the second use + + Most small pixmaps appear to be single shot, so amalgamate them into one + buffer and trim our memory usage. + + Signed-off-by: Chris Wilson + +commit ca24ffe8b9acef034a5610376c73ebbdce87d41c +Author: Chris Wilson +Date: Tue Dec 20 20:11:12 2011 +0000 + + sna: Improve a debug message + + Give the units when saying the pixmap is too small to bother tiling. + + Signed-off-by: Chris Wilson + +commit f837b9bcc7d384aeb37c2e9ebdac95571deaedc6 +Author: Chris Wilson +Date: Tue Dec 20 20:06:25 2011 +0000 + + sna/render: If the pixmap already has a GPU bo, use it for the source + + The usage hint not to create a GPU bo is obviously superceded if we + already have a GPU bo. + + Signed-off-by: Chris Wilson + +commit dfafe76a57655784c313bc2078d0b28a7ac2675b +Author: Chris Wilson +Date: Tue Dec 20 18:39:20 2011 +0000 + + sna: Do not use Y-tiling for composite back pixmaps + + These are treated by the core drawing routines as replacements for the + front-buffer attached to Windows, and so expect the usual BLT + accelerations are available, for example overlapping blits to handle + scrolling. If we create these pixmaps with Y-tiling and then they are + pinned by the external compositor we are forced to perform a double copy + through the 3D pipeline as it does not handle overlapping blits and the + BLT does not handle Y-tiling. + + Signed-off-by: Chris Wilson + +commit 0cda7b4fa82870d57fcd0036a3b734cc73e2bf28 +Author: Chris Wilson +Date: Tue Dec 20 17:58:33 2011 +0000 + + sna: Implement extended fallback handling for src == dst copies + + Only marginally better than falling all the way back to using the CPU, + is to perform a double copy to workaround the overlapping copy. + + Signed-off-by: Chris Wilson + +commit d257a967396c517146cfb12bbec5cd28418752a3 +Author: Chris Wilson +Date: Tue Dec 20 12:53:42 2011 +0000 + + sna: Explicitly handle depth==1 scratch pixmaps + + Short-cut the determination of whether it can be tiled and accelerated + -- we know it can't! This is mainly to cleanup the debug logs. + + Signed-off-by: Chris Wilson + +commit 0c12f7cb01e75de3bf9c2af8ac6d5b4152566457 +Author: Chris Wilson +Date: Tue Dec 20 10:19:01 2011 +0000 + + sna: Tidy up some recent valgrind complaints with reuse of scratch pixmaps + + Signed-off-by: Chris Wilson + +commit d3a4f5db149888239b78df1b9fcc5379b1603005 +Author: Chris Wilson +Date: Tue Dec 20 12:12:39 2011 +0000 + + sna: Fixup the refcnt to avoid an assert + + Signed-off-by: Chris Wilson + +commit ac52a1fcd11a3ab10e1843ed2d19f9cf818de4c1 +Author: Chris Wilson +Date: Tue Dec 20 02:20:48 2011 +0000 + + sna: Don't immediately check for region intersection after subtract + + In the READ==0 case we know that the region does not intersect damage + because we have just subtracted, and checking the intersection causes us + to immediately apply the subtraction operation defeating the + optimisation and forcing the expensive operation each time. + + Signed-off-by: Chris Wilson + +commit 4071dca0ef8b2b1605f16bed5c42991885a35efd +Author: Chris Wilson +Date: Tue Dec 20 00:25:29 2011 +0000 + + sna: Don't mark mapping as synchronous by default + + Only those that point into scratch memory need to synchronized before + control is handed back to the client. + + Signed-off-by: Chris Wilson + +commit 4c2a97e9d2b1073f0e4b3f7b6670939e1b1c5121 +Author: Chris Wilson +Date: Mon Dec 19 23:10:45 2011 +0000 + + sna: Always pass the damage to sna_drawable_use_gpu_bo() + + As it now assumes that the damage is always writable. + + Signed-off-by: Chris Wilson + +commit 06a1792f91d3ae2ebb17e4ad55caec10c5407aa6 +Author: Chris Wilson +Date: Mon Dec 19 21:04:02 2011 +0000 + + sna: Avoid the GPU readback with READ==0 move_to_cpu + + Signed-off-by: Chris Wilson + +commit 0b5fec3f80c8d2e4d3b504af5bb02fb76be6b3a6 +Author: Chris Wilson +Date: Mon Dec 19 20:13:05 2011 +0000 + + sna: Drop the is-mapped flag after operating via the GPU + + Mark the end of a sequence of CPU operations and force the decision to + map again to be based on the current upload operation. + + Signed-off-by: Chris Wilson + +commit 351c8f16336e757b8a4d218b3afda0698781d143 +Author: Chris Wilson +Date: Mon Dec 19 19:51:12 2011 +0000 + + sna: Discard all damage when replacing pixmap contents + + Signed-off-by: Chris Wilson + +commit addf66dda7cecaee8e58f53bb4e8d725dfdd2717 +Author: Chris Wilson +Date: Mon Dec 19 18:37:08 2011 +0000 + + sna: Tweak the rendering priorities + + If the last operation was on the GPU, continue on the GPU if this + operation overlaps any GPU damage or does not overlap CPU damage. + Otherwise, if the last operation was on the CPU only switch to the GPU + if we do not overlap any CPU damage and overlap existing GPU damage. + + Signed-off-by: Chris Wilson + +commit 9b6ade12346efa5b9cc095ad44c7d71880a19ab0 +Author: Chris Wilson +Date: Mon Dec 19 17:21:26 2011 +0000 + + sna: Create a GPU bo for accelerated core drawing + + As we now can accelerate most of the common core drawing operations, we + can create GPU bo for accelerated drawing on first use without undue + fear of readbacks. This benefits Qt especially which heavily uses core + the drawing operations. + + Signed-off-by: Chris Wilson + +commit eeb81dd6b4651c6b3e8676007d37480888726efa +Author: Chris Wilson +Date: Mon Dec 19 16:48:02 2011 +0000 + + sna: Remove the forced inplace upload + + Make the decision per-operation, with a tendency to remain mapped. + + Signed-off-by: Chris Wilson + +commit c3a8d77a2b6806a69de87fbaadea8612ef5f91dd +Author: Chris Wilson +Date: Mon Dec 19 16:51:29 2011 +0000 + + sna: Tune the inplace cross-over point to be half-cache size + + The theory being that we will also require cache space to copy from when + uploading into the shadow. + + Signed-off-by: Chris Wilson + +commit d53b1b28951fd7558e9913a2973c17983e0bcecf +Author: Chris Wilson +Date: Mon Dec 19 15:33:39 2011 +0000 + + configure: Bump the required pixman version + + UXA now also uses pixman_triangle_t in order for its fallback, so we + need to bump the required pixman version for UXA as well as SNA. + + Reported-by: Fabio Pedretti + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43946 + Signed-off-by: Chris Wilson + +commit 1fa5721f064a8d1f34e4032b52f24597f4015313 +Author: Chris Wilson +Date: Mon Dec 19 00:37:03 2011 +0000 + + sna: Reset the GTT mapping flag when freeing the shadow pointers + + Signed-off-by: Chris Wilson + +commit 7326d3098662688b8040c6e1261064caed1f5d06 +Author: Chris Wilson +Date: Mon Dec 19 00:35:14 2011 +0000 + + sna: Restore CPU shadow after a GTT memory + + When mixing operations and switching between GTT and CPU mappings we + need to restore the original CPU shadow rather than accidentally + overwrite. + + Signed-off-by: Chris Wilson + +commit ae32aaf4b20dafef138dc9c28dbddbfe49f24b83 +Author: Chris Wilson +Date: Mon Dec 19 00:34:12 2011 +0000 + + sna/gen[23]: We need to check the batch before doing an inline flush + + A missing check before emitting a dword into the batch opened up the + possibility of overflowing the batch and corrupting our state. + + Signed-off-by: Chris Wilson + +commit e32ad646762ccc7f22f938454e222d43abfb38ed +Author: Chris Wilson +Date: Sun Dec 18 23:42:07 2011 +0000 + + sna: Continue searching the linear lists for CPU mappings + + Prefer to reuse an available CPU mapping which are considered precious + and reaped if we keep too many unused entries availabled. + + Signed-off-by: Chris Wilson + +commit 15a769a66fa1afbcffc642ef980387cffefc6bef +Author: Chris Wilson +Date: Sun Dec 18 22:18:02 2011 +0000 + + sna: Distinguish between GTT and CPU maps when searching for VMA + + Similarly try to avoid borrowing any vma when all we intend to do is + pwrite. + + Signed-off-by: Chris Wilson + +commit d0ee695ef091671e2cc69b773f517030ebe961b2 +Author: Chris Wilson +Date: Sun Dec 18 20:28:18 2011 +0000 + + sna: the active cache is not marked as purgeable, so skip checking it + + Otherwise we do a lot of list walking for no-ops. + + Signed-off-by: Chris Wilson + +commit 8df9653135c6390ed699ba9f8cbf374b2cc84396 +Author: Chris Wilson +Date: Sun Dec 18 19:53:14 2011 +0000 + + sna: clear the request list when reusing a flushing bo + + That the rq is NULL when on the flushing list is no longer true, but + now it points to the static request instead. + + Signed-off-by: Chris Wilson + +commit b51e3de66292e4b29483324e1dbfeb2495817351 +Author: Chris Wilson +Date: Sun Dec 18 19:51:17 2011 +0000 + + sna: When freeing vma, first see if the kernel evicted any + + Signed-off-by: Chris Wilson + +commit fed8d145c148bfa8a8a29f4088902377f9a10440 +Author: Chris Wilson +Date: Sun Dec 18 19:26:38 2011 +0000 + + sna: Use a safe iterator whilst searching for inactive linear bo + + As we may free a purged bo whilst iterating, we need to keep the next bo + as a local member. + + Include the debugging that led to this find. + + Signed-off-by: Chris Wilson + +commit 2a98dabcabf25067abcda60f233656e19e83493a +Author: Chris Wilson +Date: Sun Dec 18 18:48:30 2011 +0000 + + sna: Purge all evicted bo + + After we find a single bo that has been evicted from our cache, the + kernel is likely to have evicted many more so check our caches for any + more bo to reap. + + Signed-off-by: Chris Wilson + +commit 8ae105b2c7a06fc81757f06ec1aaa2447b53498a +Author: Chris Wilson +Date: Sun Dec 18 18:20:11 2011 +0000 + + sna: Only retire for the VMA search if there are cached VMA + + If there are no VMA that might become inactive, there is no point + scanning the inactive lists if we are searching for VMA. + + This prevents the regression in firefox-fishbowl whilst maintaining most + of the improvement with PutComposite. + + Signed-off-by: Chris Wilson + +commit a0c0a3765ca348c74096fb157885da5b1258ee08 +Author: Chris Wilson +Date: Sun Dec 18 16:59:15 2011 +0000 + + sna: Retire if the inactive vma list is empty + + Try to recycle vma by first trying to populate the inactive list before + scanning for a vma bo to harvest. + + Signed-off-by: Chris Wilson + +commit 34efb7314612cedcda4f866bc33f3ad5b6929ae2 +Author: Chris Wilson +Date: Sun Dec 18 16:58:04 2011 +0000 + + sna: Hint likely usage of CPU bo + + If we are going to transfer GPU damage back to the CPU bo, then we can + reuse an active buffer and so improve the recycling. + + Signed-off-by: Chris Wilson + +commit 301896743867de0cbd22063c4bf2e1a8cf491656 +Author: Chris Wilson +Date: Sun Dec 18 16:17:04 2011 +0000 + + sna: Only upload to the source GPU bo if we need tiling to avoid TLB misses + + Signed-off-by: Chris Wilson + +commit b7f5d75aa54db7d0542b09f4b3081f7692ede602 +Author: Chris Wilson +Date: Sun Dec 18 16:11:34 2011 +0000 + + Silence uxa-only compilation + + Kill the stray warning for the undeclared extern used by the module + loader. + + Signed-off-by: Chris Wilson + +commit a73cc4bf1e554806f403c6704d1cf98491f4d444 +Author: Chris Wilson +Date: Sun Dec 18 14:54:12 2011 +0000 + + sna/gen5: Tidy checking against hardcoded maximum 3D size + + Signed-off-by: Chris Wilson + +commit b43548af39f8773283b744e979ee575032183cdc +Author: Chris Wilson +Date: Sun Dec 18 12:11:01 2011 +0000 + + sna: Explicitly handle errors from madv + + In order to avoid conflating whether a bo was marked purgeable with its + retained state, we need to carefully handle the errors from madv. + + Signed-off-by: Chris Wilson + +commit 954cf5129d462f7f4ff5d4ff44b256e0f091667c +Author: Chris Wilson +Date: Sun Dec 18 10:40:35 2011 +0000 + + sna/gen[67]: check for context switch after preparing source + + If we used the BLT to prepare the source, see if we can continue the + operation on the BLT. + + Signed-off-by: Chris Wilson + +commit 90a432431c8fc293db611289c3369669c2975706 +Author: Chris Wilson +Date: Sun Dec 18 10:23:11 2011 +0000 + + sna/gen[23]: Try BLT if the source/target do no fit in the 3D pipeline + + Signed-off-by: Chris Wilson + +commit eeb9741981be528d1fba3021a30ab24084a5ce8c +Author: Chris Wilson +Date: Sun Dec 18 10:04:08 2011 +0000 + + sna/gen3: Tidy checks against hardcoded maximum 3D pipeline size + + Signed-off-by: Chris Wilson + +commit dcfcf438a511ee43e5969d01e41b3040a08cac3a +Author: Chris Wilson +Date: Sun Dec 18 09:58:08 2011 +0000 + + sna/gen2+: If we use the BLT to prepare the target, try using BLT for op + + If we incurred a context switch to the BLT in order to prepare the + target (uploading damage for instance), we should recheck whether we can + continue the operation on the BLT rather than force a switch back to + RENDER. + + Signed-off-by: Chris Wilson + +commit 507debe8015ee10734a0b8a6ddf4aa251b7dddc5 +Author: Chris Wilson +Date: Sun Dec 18 01:45:47 2011 +0000 + + sna/gen5: If we need to flush the composite op, check to see if we can blit + + If we need to halt the 3D engine in order to flush the pipeline for a + dirty source, we may as well re-evaluate whether we can use the BLT + instead. + + Signed-off-by: Chris Wilson + +commit de530f89a36a80b652ed01001e6f0d4c8b1dc11a +Author: Chris Wilson +Date: Sun Dec 18 01:41:03 2011 +0000 + + sna/gen5+: First try a blt composite if the source/dest are too large + + If we will need to extract either the source or the destination, we + should see if we can do the entire operation on the BLT. + + Signed-off-by: Chris Wilson + +commit 7b88f87945f23b3f80ae44b2aa19f00dff1904c8 +Author: Chris Wilson +Date: Sun Dec 18 00:44:00 2011 +0000 + + sna: Upload images in place from CopyArea + + As for PutImage, if the damage will be immediately flushed out to the + GPU bo, we may as well do the write directly to the GPU bo and not + staged via the shadow. + + Signed-off-by: Chris Wilson + +commit 1418e4f3156a17ff6c5cd0f653918160e30b7c0e +Author: Chris Wilson +Date: Sat Dec 17 23:11:03 2011 +0000 + + sna: Tune the default pixmap upload paths + + One issue with the heuristic is that it is based on total pixmap size + whereas the goal is to pick the placement for the next series of + operations. The next step in refinement is to combine an overall + placement to avoid frequent migrations along with a per-operation + override. + + Signed-off-by: Chris Wilson + +commit 25c353503a25d20e7db5acdc63d83564804efdf4 +Author: Chris Wilson +Date: Sat Dec 17 17:16:07 2011 +0000 + + sna: Simplify write domain tracking + + Replace the growing bitfield with an enum marking where it was last + used. + + Signed-off-by: Chris Wilson + +commit d20d167a753d8e4fe581950e1bc49f29e0ec9f1f +Author: Chris Wilson +Date: Sat Dec 17 16:28:04 2011 +0000 + + sna: Upload to large pixmaps inplace + + When the pixmap is large, larger than L2 cache size, we are unlikely to + benefit from first copying the data to a shadow buffer -- as that shadow + buffer itself will mostly reside in main memory. In such circumstances + we may as perform the write to the GTT mapping of the GPU bo. As such, + it is a fragile heuristic that may require further tuning. + + Avoiding that extra copy gives a 30% boost to putimage500/shmput500 at + ~10% cost to putimage10/shmput10 on Atom (945gm/PineView), without any + noticeable impact upon cairo. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit dd8fd6c90612ada39eb32b98adc5acc97e7902aa +Author: Chris Wilson +Date: Sat Dec 17 12:38:09 2011 +0000 + + sna: Search through the inactive VMA cache for potential upload bo + + Signed-off-by: Chris Wilson + +commit 8ef5d8c1955e2e2ee19c64730f600639ac42de55 +Author: Chris Wilson +Date: Thu Dec 15 17:52:20 2011 +0000 + + sna: Map the upload buffer using an LLC bo + + In order to avoid having to perform a copy of the cacheable buffer into + GPU space, we can map a bo as cacheable and write directly to its + contents. This is only a win on systems that can avoid the clflush, and + also we have to go to greater measures to avoid unnecessary + serialisation upon that CPU bo. Sadly, we do not yet go to enough length + to avoid negatively impacting ShmPutImage, but that does not appear to + be a artefact of stalling upon a CPU buffer. + + Note, LLC is a SandyBridge feature enabled by default in kernel 3.1 and + later. In time, we should be able to expose similar support for + snoopable buffers for other generations. + + Signed-off-by: Chris Wilson + +commit 6e47f283711d122d96384a1a82854c11644e6d68 +Author: Chris Wilson +Date: Fri Dec 16 23:49:18 2011 +0000 + + sna/gen3: Enforce a minimum width of 2 elements for the render target + + Signed-off-by: Chris Wilson + +commit 2ff0826f94ca16e95cd662385f7091be750dec30 +Author: Chris Wilson +Date: Fri Dec 16 23:33:25 2011 +0000 + + sna: Discard GPU damage first before choosing where to fill_boxes() + + Signed-off-by: Chris Wilson + +commit 55520bab578865f878965aa362ec4933f4b26050 +Author: Chris Wilson +Date: Fri Dec 16 23:22:38 2011 +0000 + + sna/gen3: Initialise missing value of need ca pass for fill_boxeS() + + Signed-off-by: Chris Wilson + +commit e56d5081ea2da930bc82036ac7c4c78b433117ed +Author: Chris Wilson +Date: Fri Dec 16 23:18:02 2011 +0000 + + sna: Wrap I915_GEM_GET_PARAM with valgrind markup + + Signed-off-by: Chris Wilson + +commit e0399ec1619fe4f87f0578791e697a7e2a8c86dc +Author: Chris Wilson +Date: Fri Dec 16 23:07:37 2011 +0000 + + sna: Suppress an overwritten XY_SRC_COPY + + Signed-off-by: Chris Wilson + +commit 1684ed6a5e8c26ecb48cc1a5025107466526fe94 +Author: Chris Wilson +Date: Fri Dec 16 19:35:35 2011 +0000 + + sna: Clean up compiler warnings for shadowed variables + + No outright bug, just plenty of unwanted noise. + + Signed-off-by: Chris Wilson + +commit 300586b229ae941ac31850af00d120d8c441c583 +Author: Chris Wilson +Date: Fri Dec 16 17:56:53 2011 +0000 + + sna/gen4+: disable the blend unit for PictOpSrc + + Signed-off-by: Chris Wilson + +commit 0de7604d8ecfc73ef9e92059340d00ce5cfcdd75 +Author: Chris Wilson +Date: Fri Dec 16 17:40:01 2011 +0000 + + src/gen4+: Add support for depth 15 render copies/fills + + Signed-off-by: Chris Wilson + +commit a8fe50ab6503d9cb63931771318dc3e84d002092 +Author: Chris Wilson +Date: Sat Dec 17 11:15:36 2011 +0000 + + uxa: Explicitly check for libdrm_intel in configure + + And remove the excess dependencies from the common files. + + Signed-off-by: Chris Wilson + +commit 3320b459d6fe90d1145e3874c840b95279fb16c8 +Author: Chris Wilson +Date: Sat Dec 17 12:08:24 2011 +0000 + + sna: Clean up caches stored upon the batch bo + + Until the advent of the VMA cache, we were safe to reap the batch bo by + hand. However, as we continue to add additional data to the bo, it is + wise to use the common free function. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43899 + Signed-off-by: Chris Wilson + +commit e2c8bac972cf46982bf64bd786ecc001009081f0 +Author: Zhigang Gong +Date: Fri Dec 16 15:11:16 2011 +0800 + + uxa/glamor: Fallback to new glamor pixmap if failed to create textured pixmap. + + If we failed to create textured pixmap from BO's handle, we + turn to create a new glamor pixmap by call glamor_create_pixmap + rather than fallback to in-memory pixmap. Have to introduce + a new wrapper function intel_glamor_create_pixmap. + + Signed-off-by: Zhigang Gong + +commit 19c184b7e4f8de747ed6fb1f6f910238193cf2a1 +Author: Chris Wilson +Date: Thu Dec 15 18:18:19 2011 +0000 + + sna/gen3: Check for upload failure of video bo + + And propagate that failure back to the client. + + Reported-by: Paul Neumann + References: https://bugs.freedesktop.org/show_bug.cgi?id=43716 + Signed-off-by: Chris Wilson + +commit e68a8748f3418179eb41e8d81ba1050b883b7e47 +Author: Chris Wilson +Date: Thu Dec 15 09:44:20 2011 +0000 + + uxa: Move the region creation beyond the call into glamor + + So that we avoid leaking the region if hooking into glamor. + + Signed-off-by: Chris Wilson + +commit e3153a779ed220ad71958ce56be179d458794964 +Author: Chris Wilson +Date: Thu Dec 15 09:30:28 2011 +0000 + + sna: cap the number of times we attempt to resubmit the batch upon EBUSY + + Just in case the kernel gets stuck in a loop and we fail to make any + progress at all. + + Signed-off-by: Chris Wilson + +commit 1cc43dc97bd6438d7fc808cb5ee449889a966bdf +Author: Chris Wilson +Date: Thu Dec 15 00:00:56 2011 +0000 + + sna: More missing move-to-cpu allocation checks + + Signed-off-by: Chris Wilson + +commit 12448b56060fb9c14da6b4ab02c95c7834fd3874 +Author: Chris Wilson +Date: Thu Dec 15 00:01:37 2011 +0000 + + sna: silence warning for unused 'priv' + + Signed-off-by: Chris Wilson + +commit eb8e979b4de5d854f15ae4c86d3db29371b386c1 +Author: Chris Wilson +Date: Wed Dec 14 23:02:28 2011 +0000 + + uxa/glamor: Allocate a fbPixmap with storage for fallbacks + + When we try to create a glamor pixmap and fail we need to create a real + pixmap along with its pixel allocation, instead of detaching ourselves + and returning the fake pixmap header. + + Signed-off-by: Chris Wilson + +commit 232fa93a4bf1760e16e913e8fb4d5159c4be9295 +Author: Chris Wilson +Date: Wed Dec 14 20:11:39 2011 +0000 + + uxa/glamor: Always notify glamor that the glyph has been unrealized + + The danger of the early return when UXA is not using glyphs is evident + in the eventual crash when glamor begins evicting and reusing its glyph + cache slots. + + Signed-off-by: Chris Wilson + +commit 95cceb5ae5503af0ac50a923fa47e134f0da8743 +Author: Chris Wilson +Date: Wed Dec 14 19:27:53 2011 +0000 + + sna: Fix DBG crash whilst pruning inactive GPU buffers + + Don't attempt to dereference the NULL gpu_bo after having just freed it. + Here in lies the folly of trying to blindly silence the compiler. + + Instead we should heed the error return as it means that we didn't + decouple the pixmap from the inactive list and so we choose to place it + back on the active list to purge again in the near future. + + Reported-by: Paul Neumann + +commit e7f4b7fd91a41cac77e5eb1cb4f185141b09a09e +Author: Chris Wilson +Date: Wed Dec 14 18:21:22 2011 +0000 + + sna: Add some DBG() around Y-to-X fallbacks + + Signed-off-by: Chris Wilson + +commit 32bb2c89b8cab92f16af32e7a084bfefa406661d +Author: Chris Wilson +Date: Wed Dec 14 16:28:54 2011 +0000 + + sna: Check allocation of pixman_image_t + + And just fail to perform the copy, clearing the dst instead. + + Signed-off-by: Chris Wilson + +commit 37c525a11c0fab4e279e80ad24e5cf791239e005 +Author: Chris Wilson +Date: Wed Dec 14 16:26:46 2011 +0000 + + sna: Skip glyphs if we fail to allocate pixel data for them + + Signed-off-by: Chris Wilson + +commit 6a8188bb4dd0eba58e29803566023ad5c3d4d58a +Author: Chris Wilson +Date: Wed Dec 14 16:24:54 2011 +0000 + + sna: Close any handles after bo allocation failures + + Signed-off-by: Chris Wilson + +commit 43a22743124a83310379122d509c35840b583b2e +Author: Chris Wilson +Date: Wed Dec 14 13:26:05 2011 +0000 + + sna: Use the provided bo for blitting rather than assume priv->gpu_bo + + Reported-by: nkalkhof@web.de + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43802 + Signed-off-by: Chris Wilson + +commit 30f5ee11f8ec3688807bbaded92561e96f9a439b +Author: Chris Wilson +Date: Wed Dec 14 12:30:40 2011 +0000 + + sna: Use a static request and synchronous rendering in case of malloc failure + + Signed-off-by: Chris Wilson + +commit 23fb2cebbe1d4d7df7403a64635339efa08a4dfe +Author: Chris Wilson +Date: Wed Dec 14 12:34:03 2011 +0000 + + sna/blt: Add a missing allocation check upon the source CPU pixmap + + Signed-off-by: Chris Wilson + +commit 5b0f3ff9a83b7cc932e96400999dc5e4a49369cb +Author: Chris Wilson +Date: Wed Dec 14 12:23:04 2011 +0000 + + sna/damage: Guard against malloc failures + + In the event of failure, we choose to loose track of the damage and + choose rendering corruption over crashing. + + Signed-off-by: Chris Wilson + +commit f8b9a2a5473efd0fefb3d2878e70c24c320245ca +Author: Zhigang Gong +Date: Tue Dec 13 21:46:14 2011 +0800 + + uxa/glamor: Enable the rest of the glamor rendering routines + + This commit hooks up all the remaining rendering routines to call into + glamor; the takeover is nearly complete! When tested with the latest + glamor master branch, it passes rendercheck. + + One thing need to be pointed out is the picture's handling. + Pictures support many different color formats, but glamor's + texture only support a few color formats. And the most common + scenario is that we create a pixmap with a color depth and + then attach it to a picture which has a specific color format + with the same color depth. But there is no way to change a + texture's internal format after the texture was allocated. + If you do that, the OpenGL will allocate a new texture. And + then the glamor side and UXA side will be inconsitent. So + for all the picture related operations, we can't fallback to + UXA path directly, even it is rather a straight forward + operation. So for the get_image, Addtraps.., we have to add + wrappers function for them to jump into glamor firstly. + + Signed-off-by: Zhigang Gong + [ickle: prefer access; ok = glamor(); finish; if (!ok) goto fallback; return; ] + Signed-off-by: Chris Wilson + +commit d5456e40d9bebc9d6a121abdb124a90a2a8a6958 +Author: Chris Wilson +Date: Wed Dec 14 10:41:33 2011 +0000 + + uxa/glamor: Silence a compiler warning for some unused code + + intel_glamor.c: In function 'intel_glamor_create_screen_image': + intel_glamor.c:192:12: warning: variable 'pixmap' set but not used + [-Wunused-but-set-variable] + + Signed-off-by: Chris Wilson + +commit 4f1a99a70e76ea5637c5ee8226b2e52a464f5948 +Author: Chris Wilson +Date: Tue Dec 13 19:44:15 2011 +0000 + + sna: Protect against deferred malloc failures for pixel data + + As we now defer the allocation of pixel data until first use, it can + fail in the middle of a rendering routine. In order to prevent chasing + us passing a NULL pointer into the fallback routines, we need to propagate + the failure from the malloc and suppress the failure, discarding the + operation, which is less than ideal. + + Signed-off-by: Chris Wilson + +commit d2c6d950ed2c5882e7d501b6974e72be4d6da8a8 +Author: Chris Wilson +Date: Tue Dec 13 15:04:10 2011 +0000 + + sna: Mark upload buffers as unaccessible upon submission + + Use valgrind to catch use-after-finish bugs. + + Signed-off-by: Chris Wilson + +commit e39ea29bcc5d1d76dd5cb3db555516ef848647a5 +Author: Chris Wilson +Date: Tue Dec 13 13:18:56 2011 +0000 + + sna: Allow the debugger to map bo from the batch during kgem_submit() + + Signed-off-by: Chris Wilson + +commit 2fabb5068d36ce97242844066b5121fcf6d9c24e +Author: Chris Wilson +Date: Tue Dec 13 13:15:51 2011 +0000 + + sna: Debug fixup for non-LLC systems + + The cpu bo is only allocated on LLC systems, so do avoid the NULL deref on + debugging for others. + + Signed-off-by: Chris Wilson + +commit e037379c8e57f8e42956863c10a4e2b18057a6d5 +Author: Chris Wilson +Date: Tue Dec 13 13:14:15 2011 +0000 + + sna: Fix a debugging assert + + The bo is allowed to be NULL, so defer the assert until after it is + known to be non-NULL. + + Signed-off-by: Chris Wilson + +commit 5d5b2b8ee203ae2274fc7d13ed38d2945facca9e +Author: Chris Wilson +Date: Tue Dec 13 11:30:05 2011 +0000 + + uxa: Cap the maximum number of VMA cached + + Since we can not keep an unlimited number of vma cached due to the hard + per-process limits on the number of mappings and recreating mappings is + slow due to excruciatingly slow GTT pagefaults, we need to compromise + and keep a small MRU cache of inactive mmaps. + + This uses the new API in libdrm-2.4.29 to specify the limit upon the VMA + cache maintained by libdrm. + + Signed-off-by: Chris Wilson + +commit 1128825efb3179a5a5d951fa24db6b769ee41219 +Author: Chris Wilson +Date: Tue Dec 13 11:20:25 2011 +0000 + + uxa: Wakeup 3s after the last rendering to reap the bo-cache + + libdrm expires its bo 2s after entry into the cache, but we need to free + a buffer to trigger the reaper. So schedule a timer event to trigger 3s + after the last rendering is submitted to free any resident bo during + long periods of idleness. + + Signed-off-by: Chris Wilson + +commit db7c9e8561afcc1ca7ab16b3bf2d5b49938e26d9 +Author: Chris Wilson +Date: Tue Dec 13 10:05:25 2011 +0000 + + configure: Link the extra valgrind debugging to --enable-debug + + Signed-off-by: Chris Wilson + +commit d02dc0fd84194b6acc607d17e4396dd1fdc681f8 +Author: Chris Wilson +Date: Tue Dec 13 01:18:59 2011 +0000 + + sna: Set the refcnt on the replacement bo + + The paranoia wasn't in vain. + + Signed-off-by: Chris Wilson + +commit 7472db8c8c9994798ea36de1ce2f51725d8b387a +Author: Chris Wilson +Date: Mon Dec 12 21:55:04 2011 +0000 + + sna: Double-check that the submitted buffers were not purged + + More paranoia is good for the soul. + + Signed-off-by: Chris Wilson + +commit 0bbd6a08fe485c80bd5c9a1b7027618a03a26f84 +Author: Chris Wilson +Date: Mon Dec 12 21:52:56 2011 +0000 + + sna/gen2: Tidy checking against too large pixmaps for the 3D pipeline + + Signed-off-by: Chris Wilson + +commit b392474f3a052fefc410383725b64f0fdbe7788e +Author: Chris Wilson +Date: Mon Dec 12 21:28:09 2011 +0000 + + sna: Force a suitable minimum stride for 3D temporaries + + Signed-off-by: Chris Wilson + +commit 3c22baaba97a89d24e507e3d832d53d764902040 +Author: Chris Wilson +Date: Mon Dec 12 21:16:56 2011 +0000 + + sna/gen2: Check for unhandled pitches in the render pipeline + + Signed-off-by: Chris Wilson + +commit f6a30df8dc75852d1f6daeabe4511b275594e52e +Author: Chris Wilson +Date: Mon Dec 12 20:40:29 2011 +0000 + + sna: Enable memcpy uploads to SHM pixmaps + + Signed-off-by: Chris Wilson + +commit 3c163d105e964a1084d665500ef917254d8f2179 +Author: Chris Wilson +Date: Mon Dec 12 16:26:13 2011 +0000 + + sna: Use the CPU bo as a render source if compatible and no GPU bo + + This is principally to catch the cases of compositing after a fresh + PutImage. + + Signed-off-by: Chris Wilson + +commit c481bec356b2e40e66a000dbaaf261bf7aae930d +Author: Chris Wilson +Date: Mon Dec 12 14:10:57 2011 +0000 + + sna: Experiment with creating the CPU pixmap using an LLC BO + + A poor cousin to vmap is to instead allocate snooped bo and use a CPU + mapping for zero-copy uploads into GPU resident memory. For maximum + performance, we still need tiled GPU buffers so CPU bo are only useful + in situations where we are frequently migrating data. + + Signed-off-by: Chris Wilson + +commit 6c9aa6f9cf8e59ca6aa1866b83690a1de8cfb757 +Author: Chris Wilson +Date: Mon Dec 12 11:47:25 2011 +0000 + + sna: Defer allocation of memory for larger pixmap until first use + + In the happy scenario where the pixmap only resides upon the GPU we can + forgo the CPU allocation entirely. The goal is to reduce the number of + needless mmaps performed by the system memory allocator and reduce + overall memory consumption. + + Signed-off-by: Chris Wilson + +commit 4b48d28f6e85f345730cb7242f2152ac115b267a +Author: Chris Wilson +Date: Mon Dec 12 10:52:34 2011 +0000 + + sna: Fix a typo, end statements with semi-colons + + Signed-off-by: Chris Wilson + +commit 4d20798c7871ffe8581e2cf509b6aa2e40b3ae5f +Author: Chris Wilson +Date: Mon Dec 12 10:10:16 2011 +0000 + + sna: We need to remap the gpu_only mmap prior to every use + + Since the VMA may be reaped at any time whilst the mapping is idle. + + Signed-off-by: Chris Wilson + +commit 2682308c10c9622247409dee9c6bb6a862b73c3f +Author: Chris Wilson +Date: Mon Dec 12 09:24:11 2011 +0000 + + sna: Remove bo transference for whole XCopyArea + + In benchmarking firefox this performs whose - it would appear the + sources are indeed used more often than not. + + Signed-off-by: Chris Wilson + +commit 7703424222f8bd08450c1b109ea64c6b0ee901d8 +Author: Chris Wilson +Date: Mon Dec 12 00:15:10 2011 +0000 + + sna/gen6: Only use CPU bo for a render target if untiled + + For large render targets, we prefer to use tiled bo in order to avoid + severe performance degradation. However, if we don't have a GPU bo but + do have a CPU bo and the operation would be untiled, then simply use the + CPU bo. + + Signed-off-by: Chris Wilson + +commit a92a41ba3291a4304948ed1961d1242ca7d3981e +Author: Chris Wilson +Date: Sun Dec 11 19:03:54 2011 +0000 + + sna/gen6: Tidy the usage of the max pipeline size + + Signed-off-by: Chris Wilson + +commit e9e6d6f7c8af300716c64b041f96c09d58b3eaa2 +Author: Chris Wilson +Date: Sun Dec 11 17:25:46 2011 +0000 + + sna/gen3: Move the video dst_bo to make the conditional clearer + + Signed-off-by: Chris Wilson + +commit 118ef0781c5064aa0696af59a5dac67091b10046 +Author: Chris Wilson +Date: Sun Dec 11 16:56:53 2011 +0000 + + sna/composite: Make the check for a no-op earlier and clearer + + Signed-off-by: Chris Wilson + +commit 2674ef864c93034d728ee11ee0b7ab96cd4cba57 +Author: Chris Wilson +Date: Sun Dec 11 16:23:13 2011 +0000 + + sna: Enable hooking up of valgrind during debugging + + Signed-off-by: Chris Wilson + +commit c83fd4e24de187700bc125037cd9ae311514213e +Author: Chris Wilson +Date: Sun Dec 11 16:14:38 2011 +0000 + + sna: Add some more debug messages for VMA caching + + Signed-off-by: Chris Wilson + +commit 3ae7fb918a2ca47d3944521a1ae30143dcb14eeb +Author: Chris Wilson +Date: Sun Dec 11 13:52:42 2011 +0000 + + sna: Restrict pitch alignment on 945gm to 64 bytes + + In theory we should be able to disable dual-stream mode and so be + subject to much looser restrictions (such as the pitch need only be + dword aligned). However, achieving single-stream mode seems quite + difficult! + + Reported-by: Paul Neumann + References: https://bugs.freedesktop.org/show_bug.cgi?id=43706 + Signed-off-by: Chris Wilson + +commit 2f35d77cd07a4974051c922f4809ce44939b0556 +Author: Chris Wilson +Date: Sun Dec 11 13:37:18 2011 +0000 + + sna: Update computation of untiled pitch to cater for CREATE_SCANOUT + + Signed-off-by: Chris Wilson + +commit 5a0139487f5a5caada56121395aa166fc9f08663 +Author: Chris Wilson +Date: Sun Dec 11 12:34:40 2011 +0000 + + sna/gen3: Ensure that depth read/writes are disabled before first use + + Our goal is to achieve "single-stream" rendering where the entire + RenderCache is allocated to the colour buffer (rather than split between + colour and depth). In theory all that is required is for the pipeline + not to reference the depth buffer at all, however it is not made clear + when that evaluation is made. + + Signed-off-by: Chris Wilson + +commit a02bbd8700690c98c6cf3ae98dd7ee3da9887b0a +Author: Chris Wilson +Date: Sun Dec 11 10:34:37 2011 +0000 + + sna: Only transfer the bo if the src/dst are of matching size + + If the src replaces the dst, it could just be a much larger pixmap! + + Signed-off-by: Chris Wilson + +commit 43a99648635fa76e0d6d71acaeb6ba919d24eb26 +Author: Chris Wilson +Date: Sun Dec 11 10:30:48 2011 +0000 + + sna: Only transfer unpinned buffers + + Signed-off-by: Chris Wilson + +commit eb859f644633ee716083d253a5b7ff95163380e5 +Author: Chris Wilson +Date: Sun Dec 11 01:34:05 2011 +0000 + + uxa/video: Correct the offset of the binding table in the surface buffer + + The binding table is intended to be after all the surface descriptions, + so make sure we write it with the appropriate offset into the buffer. + + Fixes regression from 699888a64 (uxa/video: Use the common bo + allocations and upload) + + Reported-by: Cyril Brulebois + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43704 + Signed-off-by: Chris Wilson + +commit 051a18063df075536cb1ac0dc4dfc3c1306ab74e +Author: Chris Wilson +Date: Sat Dec 10 22:45:25 2011 +0000 + + sna: Implement a VMA cache + + A VMA cache appears unavoidable thanks to compiz and an excrutiatingly + slow GTT pagefault, though it does look like it will be ineffectual + during everyday usage. Compiz (and presumably other compositing + managers) appears to be undoing all the pagefault minimisation as + demonstrated on gen5 with large XPutImage. It also appears the CPU to + memory bandwidth ratio plays a crucial role in determining whether + going straight to GTT or through the CPU cache is a win - so no trivial + heuristic. + + x11perf -putimage10 -putimage500 on i5-2467m: + Before: + bare: 1150,000 2,410 + compiz: 438,000 2,670 + After: + bare: 1190,000 2,730 + compiz: 437,000 2,690 + UXA: + bare: 658,000 2,670 + compiz: 389,000 2,520 + + On i3-330m + Before: + bare: 537,000 1,080 + compiz: 263,000 398 + After: + bare: 606,000 1,360 + compiz: 203,000 985 + UXA: + bare: 294,000 1,070 + compiz: 197,000 821 + + On pnv: + Before: + bare: 179,000 213 + compiz: 106,000 123 + After: + bare: 181,000 246 + compiz: 103,000 197 + UXA: + bare: 114,000 312 + compiz: 75,700 191 + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 735a15208dd600eefa3090f344186df9cac0462d +Author: Chris Wilson +Date: Sat Dec 10 23:45:56 2011 +0000 + + sna/gen5: Remove a redundant format check + + Signed-off-by: Chris Wilson + +commit c5584252c34b792313578cc31d56248d8990b571 +Author: Chris Wilson +Date: Sat Dec 10 23:34:16 2011 +0000 + + sna: Remember to assign a new unique id for the replaced bo + + Missed from the previous patch. + + Signed-off-by: Chris Wilson + +commit 9c764dc13be40fc14238a4c130f7d8b44dbdf7db +Author: Chris Wilson +Date: Sat Dec 10 22:38:57 2011 +0000 + + sna: Be more pessimistic with CPU sources + + Try to avoid a few more unnecessary context switches. + + Signed-off-by: Chris Wilson + +commit 358aaef6dbff0737f026046b0c9a2e21d8cfdf2a +Author: Chris Wilson +Date: Sat Dec 10 22:38:33 2011 +0000 + + sna/dri: Prefer using the BLT for DRICopyRegion on pre-SNB + + Signed-off-by: Chris Wilson + +commit c295ad8da91e39c8fffa540901097651df5d24b2 +Author: Chris Wilson +Date: Sat Dec 10 22:37:31 2011 +0000 + + sna: Transfer the whole bo for a replacement XCopyArea + + If we are copying over the entire source onto the destination,just copy + across the GPU bo. This is often used for caching images as pixmaps. + + Signed-off-by: Chris Wilson + +commit ece7fc8afeb8eefcf0ad1a054f02e7fac8db6327 +Author: Chris Wilson +Date: Sat Dec 10 21:04:08 2011 +0000 + + sna: Only use the 64-byte pitch alignment for scanout + + Signed-off-by: Chris Wilson + +commit b3816cf3a99d23d0c3ab4cd716b24ea544a07283 +Author: Chris Wilson +Date: Sat Dec 10 20:32:56 2011 +0000 + + sna: Remove assertions that external bo are not busy + + We have to be careful to assume bo via exposed are under our full + control, in particular not to assert their state. :( + + Signed-off-by: Chris Wilson + +commit b5a6bc9e33a2797c926969e1f98b4a9a796248c5 +Author: Chris Wilson +Date: Sat Dec 10 13:14:45 2011 +0000 + + sna/gen[23]: Fixup render targets with pitches below hw minimum + + gen2/3 have a restriction that the 3D pipeline cannot render to a pixmap + with a pitch less than 8/16 respectively. Rather than mandating all + pixmaps to be created with a stride greater than 16, fixup the bo for + the rare occasions when it is necessary. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43688 + Signed-off-by: Chris Wilson + +commit c0dab7b1cf17fe751c86ad2b3fabce682eb50366 +Author: Chris Wilson +Date: Sat Dec 10 12:46:46 2011 +0000 + + sna/trapezoids: Try to render traps onto a8 destinations in place + + Signed-off-by: Chris Wilson + +commit c73b14cabb059075af0f1727847074a89941c9df +Author: Chris Wilson +Date: Sat Dec 10 11:41:18 2011 +0000 + + sna/trapezoids: First try the scan converter for fallbacks + + Signed-off-by: Chris Wilson + +commit 22d9bc0bc1ccd869ebcc93f9a57efc8a85840cb8 +Author: Chris Wilson +Date: Fri Dec 9 23:48:11 2011 +0000 + + sna: Use a single definition for the inactive cache timeout + + And share it between the timer and the expiration function, just to + simplify the code. + + Signed-off-by: Chris Wilson + +commit eb3e04d960cd749adf696ba15c501a17cd1a184e +Author: Chris Wilson +Date: Fri Dec 9 23:36:56 2011 +0000 + + sna: Fallback to ordinary monotonic clock if coarse is not supported + + Signed-off-by: Chris Wilson + +commit 1c202cc0746541b541d0af22eab5c9798d229a69 +Author: Chris Wilson +Date: Fri Dec 9 17:25:19 2011 +0000 + + sna: s/MONOTONICE/MONOTONIC/ + + A late addition to be flexible for compiling on different systems + heralded its doom. + + Signed-off-by: Chris Wilson + +commit c51626ccb660c777da8d84bb425de0d590864448 +Author: Chris Wilson +Date: Fri Dec 9 15:45:29 2011 +0000 + + sna: Use the coarse monotonic clock to coalesce wakeup events + + For the long interval events (such as expiring the caches), we do not + need precise timing and so can use a coarse timer to allow the system + to coalesce and reduce wakeup events. + + Signed-off-by: Chris Wilson + +commit c22197f25bc0419d9f2abfcc978df5ef439feb47 +Author: Chris Wilson +Date: Fri Dec 9 15:12:03 2011 +0000 + + sna: Discard bo for idle private pixmaps + + If a pixmap lies around for a couple of minutes not being used, it is + unlikely to be used again in the near future. Reap the GPU buffers of + any of those idle pixmaps (copying to a more compact buffer in system + memory) in order to free up resources for use elsewhere. Any object + that is exposed via DRI is obviously exempt from this reaping. + + Signed-off-by: Chris Wilson + +commit 429a36f7481b9bfd5ed137642d2916d69a713557 +Author: Chris Wilson +Date: Fri Dec 9 09:54:12 2011 +0000 + + uxa: Fix clip processing for uxa_fill_spans() + + Fixes regression from e0066e77e026b0dd0daa0c3765473c7d63aa6753 + (uxa: Simplify Composite solid acceleration for spans by only clipping + once) [2.15.901] + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43649 + Signed-off-by: Chris Wilson + +commit 699888a6410b0699c69a7f8a8d82dc4fde6fcc7f +Author: Chris Wilson +Date: Thu Dec 8 16:55:20 2011 +0000 + + uxa/video: Use the common bo allocations and upload + + In order to avoid inconsistent usage of coherency domains and to avoid + completely unnecessary clflushing during video playback, use the same + buffer allocation and upload functions as the rest of the driver. + + Reported-by: Christophe Roland + Bugzilla: http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=60;bug=651316 + Signed-off-by: Chris Wilson + +commit 706d3a97bd3049e60c08d121a3d4d81c03029a87 +Author: Chris Wilson +Date: Thu Dec 8 18:05:14 2011 +0000 + + sna/trapezoids: Fix detection of rectilinearity after projection + + A typo confused left and right, rejecting true vertical edges, and worse + might have incurred false positives. + + Signed-off-by: Chris Wilson + +commit bc081420a5d6d28c4e6fd5527a70caaa3a8361c4 +Author: Simon Que +Date: Wed Dec 7 16:20:41 2011 -0800 + + xf86-video-intel: change order of DPMS operations + + The operations when setting dpms on should be in the order opposite + of what's done when setting dpms off. + + This is because of potentially conflicting effects: + ~ drmModeConnectoSetProperty() enables/disables the backlight driver. + Some backlight drivers such as intel_backlight set the backlight to 0 + when disabled and to max when enabled. + ~ intel_output_dpms_backlight() saves the backlight value when turning + DPMS off and restores it when turning DPMS on. + + Here's the current order of operations: + + xset dpms force off (backlight is nonzero) + drmModeConnectoSetProperty(DPMSModeOff) + kernel: disable backlight, backlight=0 + intel_output_dpms_backlight(DPMSModeOff) + save backlight value (0) <-- it has been set to 0 by kernel + set backlight to 0 + + xset dpms force on + drmModeConnectoSetProperty(DPMSModeOn) + kernel: enable backlight, backlight=max + intel_output_dpms_backlight(DPMSModeOn) + set backlight to saved value (0) + + The correct way to do this would be to reverse the operations during + xset dpms force off: + intel_output_dpms_backlight(DPMSModeOff) + save backlight value (nonzero) + set backlight to 0 + drmModeConnectoSetProperty(DPMSModeOff) + kernel: enable backlight, backlight=0 + + This restores the saved nonzero backlight value during the force on. + + Signed-off-by: Simon Que + Signed-off-by: Chris Wilson + +commit 84aaf1537cbd29e163346d03debc39f4623c69eb +Author: Chris Wilson +Date: Thu Dec 8 12:36:08 2011 +0000 + + sna/gen7: Reduce dst readbacks for unsupported sources + + Signed-off-by: Chris Wilson + +commit 440ac68ec074e82818713773f3e2cb5d363862aa +Author: Chris Wilson +Date: Thu Dec 8 12:35:54 2011 +0000 + + sna/gen6: Reduce dst readbacks for unsupported sources + + Signed-off-by: Chris Wilson + +commit bc68211d18356c4a0e011ac360665d600de9fa30 +Author: Chris Wilson +Date: Thu Dec 8 12:35:39 2011 +0000 + + sna/gen5: Reduce dst readbacks for unsupported sources + + Signed-off-by: Chris Wilson + +commit a5df7c28e458c2f2b173fe5d745f447087eb8c6f +Author: Chris Wilson +Date: Thu Dec 8 12:35:22 2011 +0000 + + sna/gen4: Reduce dst readbacks for unsupported sources + + Signed-off-by: Chris Wilson + +commit cc8cab649c0a4788803d2c62f186142ec7152b89 +Author: Chris Wilson +Date: Thu Dec 8 12:34:58 2011 +0000 + + sna/gen3: Reduce readbacks on dst for unsupported sources + + Signed-off-by: Chris Wilson + +commit e5bc0c823b8fd46b3f851c5e9a4b4de39cda9a91 +Author: Chris Wilson +Date: Thu Dec 8 12:34:34 2011 +0000 + + sna/gen2: Avoid readbacks for unsupported sources + + Signed-off-by: Chris Wilson + +commit 874c722c86b06ac0aa10e6943d3faf76fcb751be +Author: Chris Wilson +Date: Thu Dec 8 12:07:28 2011 +0000 + + sna: Beware flushing partial buffers before they are written + + A partial buffer is considered finished upon the next batch submission, + so one needs to be careful that it is completely written to before such + an event is triggered. move-to-cpu is such a trigger as demonstrated by + the picture fixup routine for handling convolution filters. + + Reported-by: Victor Machado + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43607 + Signed-off-by: Chris Wilson + +commit 6ccb114a7e685c69fb388ebd119393455b315c36 +Author: Chris Wilson +Date: Wed Dec 7 21:09:31 2011 +0000 + + sna: Prefer to use our pixmap upload paths + + Signed-off-by: Chris Wilson + +commit 101942d41df7efaa6103e31e738775fafdb63159 +Author: Chris Wilson +Date: Mon Dec 5 10:11:04 2011 +0000 + + uxa: Unmap the buffer after swrast + + Otherwise we may exhaust the per-process vma limit and cause + applications to stop rendering and eventually crash the X server. + + Will only work in conjunction with a new libdrm (2.4.28) and commit + c549a77c (intel: Unmap buffers during drm_intel_gem_bo_unmap) + in particular. + + Reported-by: nobled@dreamwidth.org + References: https://bugs.freedesktop.org/show_bug.cgi?id=43075 + References: https://bugs.freedesktop.org/show_bug.cgi?id=40066 + Signed-off-by: Chris Wilson + +commit b424b10e771b1d3d041efdd2b77f576251364744 +Author: Chris Wilson +Date: Sun Dec 4 13:01:10 2011 +0000 + + sna: use tight pitches for a8 + + As we never use these with a depth nor attach them to scanout, we can + safely relax the multiple-of-64 byte pitch restriction. In the unlikely + event that we do need A8 surfaces with depthbuffers, this is broken... + + Signed-off-by: Chris Wilson + +commit 46c7df803881fa0e733c0d0fdd37567ebdccd6ac +Author: Chris Wilson +Date: Sat Dec 3 18:02:00 2011 +0000 + + sna: Remove one redundant retire + + There is no need to retire immediately after a batch and no indication + that it will be useful. + + Signed-off-by: Chris Wilson + +commit b99c6b13ebba9521333b8dd5982ac37b6e244b54 +Author: Chris Wilson +Date: Sat Dec 3 18:01:11 2011 +0000 + + sna: Pass the current value of the batch offset to the kernel relocator + + Signed-off-by: Chris Wilson + +commit 735219cd59e6184a6622d3d429a704ca3f58b9cd +Author: Chris Wilson +Date: Fri Dec 2 10:42:00 2011 +0000 + + uxa: Ensure that we can fallback with all of (src, mask, dst) as GTT mappings + + Signed-off-by: Chris Wilson + +commit f6c82c73b673ec3c9cce432fe38d5e0076234efd +Author: Chris Wilson +Date: Fri Dec 2 10:34:10 2011 +0000 + + uxa: Fix runtime linking of previous commit + + So much for relying on compiler warnings. + + Signed-off-by: Chris Wilson + +commit 85d3dc5910a2eea3a10b822e01443e11eaae9291 +Author: Chris Wilson +Date: Fri Dec 2 10:22:51 2011 +0000 + + uxa: Reset size limits based on AGP size + + The basis for the constraints are what we can map into the aperture for + direct writing with the CPU, so use the size of the mappable region as + opposed to the size of the total GTT. + + Signed-off-by: Chris Wilson + +commit e55198746102afb7427f577bd5bfc76667438da9 +Author: Chris Wilson +Date: Thu Dec 1 13:49:03 2011 +0000 + + sna: Reuse the full size of an old handle for io + + Signed-off-by: Chris Wilson + +commit c5632369cbd6473304c06e4230347abbe46513ec +Author: Chris Wilson +Date: Thu Dec 1 13:23:56 2011 +0000 + + sna: Move the preservation of the io handle into the common destroy path + + In order to capture and reuse all io buffers. + + Signed-off-by: Chris Wilson + +commit 95f4da647a4055545b09cae0834df0fa2127a458 +Author: Chris Wilson +Date: Wed Nov 30 11:59:31 2011 +0000 + + sna: Align pwrite to transfer whole cachelines + + Daniel claims that this is will be faster, or will be once he has + completed rewriting pwrite! + + Signed-off-by: Chris Wilson + +commit ecd6cca617ac29cf2b1b2a4d33fca19b84fea2a9 +Author: Chris Wilson +Date: Tue Nov 29 19:27:46 2011 +0000 + + sna/gen5: Handle cpu-bo for render targets + + Signed-off-by: Chris Wilson + +commit d8f2e87473eae81e07922271b5f608fdceb4ae5e +Author: Chris Wilson +Date: Tue Nov 29 10:59:48 2011 +0000 + + sna/render: Fix check for "migrate whole pixmap" + + The whole pixmap means the sample covers the full width and height, not + just either! + + Signed-off-by: Chris Wilson + +commit 20e57914089d6959529ad222e04853f5ffcb364f +Author: Chris Wilson +Date: Tue Nov 29 10:59:20 2011 +0000 + + sna: Fix assertion around flushing of mmap(PROT_READ) + + Signed-off-by: Chris Wilson + +commit 56155c91afb5a0dcafe4dbc22ade3b7c0c977674 +Author: Chris Wilson +Date: Tue Nov 29 10:27:18 2011 +0000 + + sna/gen6: Set the batch mode prior to checking limits and flushing + + If we change contexts, then we will submit the batch obsoleting the + earlier resource checks. + + Signed-off-by: Chris Wilson + +commit 5b1e9e15738b9001346ab6e0166f861ce308008e +Author: Chris Wilson +Date: Mon Nov 28 22:01:00 2011 +0000 + + sna: Always reduce tiling for thin pixmaps + + Benchmarking on the current code base, says this is now a win. A + reversal of older benchmarks, so expect further tuning. + + Signed-off-by: Chris Wilson + +commit dacb301c05dd1686e788d6ed8101887c27968389 +Author: Chris Wilson +Date: Mon Nov 28 18:59:10 2011 +0000 + + sna: Use the correct pitch when creating an untiled active buffer + + Signed-off-by: Chris Wilson + +commit 8657128fa7e758a2dde93340d6e58928d5f11255 +Author: Chris Wilson +Date: Mon Nov 28 18:22:01 2011 +0000 + + sna: Pass the pixmap to sna_replace() + + Signed-off-by: Chris Wilson + +commit 4e38d22105da2bd97db005dc505e75dcd22291d3 +Author: Chris Wilson +Date: Mon Nov 28 18:21:19 2011 +0000 + + sna: Tidy kgem_choose_tiling() + + Reduce the calls to compute the surface size down to one. + + Signed-off-by: Chris Wilson + +commit 04f47e52da06cc20c2a266da92ba3f8e961433cb +Author: Chris Wilson +Date: Sun Nov 27 17:45:05 2011 +0000 + + sna: Don't try to guess when the kernel believes a buffer to be flushed + + Signed-off-by: Chris Wilson + +commit d87c332653001db4413c7dd81116ee03830db491 +Author: Chris Wilson +Date: Sun Nov 27 10:18:11 2011 +0000 + + sna: Eliminate empty glyphs during format conversion + + Signed-off-by: Chris Wilson + +commit 413776c79ee7c55b3a48b1ed29af63f8cea39337 +Author: Chris Wilson +Date: Sun Nov 27 10:17:40 2011 +0000 + + sna: Use 64-bit mov (when available) for bitmap glyphs + + Signed-off-by: Chris Wilson + +commit 507f99eba2c72bc109c9267c698f3d5f9fb6f539 +Author: Chris Wilson +Date: Sat Nov 26 17:57:57 2011 +0000 + + sna/gen6+: Only use BLT if the untiled bo will cause per-pixel TLB misses + + i.e. only force the BLT if using the sampler is going to be incredibly + slow. + + Signed-off-by: Chris Wilson + +commit f11e9f189111f53ace20381a0bd4f559ccd3605f +Author: Chris Wilson +Date: Sat Nov 26 17:12:03 2011 +0000 + + sna: Only check for all-damaged CPU bo if we may discard the GPU bo + + The goal of the optimisation is to discard the GPU bo early, so we + can skip the extra damage reduction if there is no gpu bo. + + Signed-off-by: Chris Wilson + +commit ccee730e45d8c2490e578d0b85d9e76f3a44f76f +Author: Chris Wilson +Date: Sat Nov 26 16:47:04 2011 +0000 + + sna: Discard the gpu-bo is the entire pixmap is written to by the CPU. + + Signed-off-by: Chris Wilson + +commit df68b20a17e28c0898226f970315bc8e515e9f56 +Author: Chris Wilson +Date: Sat Nov 26 16:45:22 2011 +0000 + + sna: Disabling tiling if the bo would be smaller than a page + + Once again experiment with untiled smalled buffers. + + Signed-off-by: Chris Wilson + +commit d88ad2e60ac3d9f5608db1653a7af789f7f1b446 +Author: Chris Wilson +Date: Sun Nov 27 09:01:09 2011 +0000 + + sna: Round up stride to alignment for TLB miss checking + + We want to avoid the condition of reducing the tiling mode (when reusing + an active untiled buffer in preference to creating a new) for a wide buffer + when doing will force a TLB miss on each sample. + + Signed-off-by: Chris Wilson + +commit 16f5e224dcfd97012b38ee1af6c72dbe3c0f3304 +Author: Chris Wilson +Date: Fri Nov 25 16:21:41 2011 +0000 + + sna: Avoid the double application of drawable offsets for tiled spans + + As we handle tiled spans indirectly, we need to avoid applying the + drawable offsets twice (once in the mi layer generating the spans, and + then once more in the tiled rect renderer). + + Reported-by: Ulrich Müller + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43245 + Signed-off-by: Chris Wilson + +commit e06789871b5cdf0c5535d46622b8ec3f85eb4386 +Author: Chris Wilson +Date: Fri Nov 25 15:24:29 2011 +0000 + + sna/gen5+: Prefer using the BLT when either src or dst is untiled + + The cost of the TLB miss on every sample far outweighs the impact of the + context (and ring) switch. + + Signed-off-by: Chris Wilson + +commit d0cce0da71fae275a0f1be33b2bebad9d41212c9 +Author: Chris Wilson +Date: Fri Nov 25 13:16:37 2011 +0000 + + sna/gen5: Use the same prefer_blt_fill() switch for fill-one + + Signed-off-by: Chris Wilson + +commit 7ad2d3b695115439f685a12d43ab240cf5e18ef7 +Author: Chris Wilson +Date: Fri Nov 25 09:44:21 2011 +0000 + + sna/gen2: Wire up NO_COMPOSITE for debugging + + Signed-off-by: Chris Wilson + +commit 394ad51c421f41e4bc6545fcee10b1757cb5f518 +Author: Chris Wilson +Date: Thu Nov 24 17:35:36 2011 +0000 + + sna/video: Check for Xv presence in the server before initialising + + Signed-off-by: Chris Wilson + +commit a2fab9560ec5dd6efc352917fe7626e59bed69e3 +Author: Chris Wilson +Date: Thu Nov 24 17:14:08 2011 +0000 + + sna: Downgrade Y-tiling if we must use the BLT + + There are many operations, usually the core drawing acceleration, where + the BLT is much more preferable than using the CPU. However, the BLT is + limited to only using X-tiling, so if we encounter a Y-tiled pixmap + target we need to recreate it as X-tiling before proceeding. Hopefully, + the pixmap is then kept around and rendered multiple times to amoritize + the cost of the copy. + + Signed-off-by: Chris Wilson + +commit e0a4492c8b51d6ae09cde0b895da6177284e95e0 +Author: Chris Wilson +Date: Thu Nov 24 17:00:18 2011 +0000 + + sna: Use Y-tiling for source pixmaps + + Y-tiling is slightly faster with RENDER operations, so attempt to + allocate source-only pixmaps using this tiling mode. Actually using + Y-tiling is a delicate balance because it then prevents the use of the + BLT. For instance, enabling Y-tiling by default gives a 30% performance + improvement on the fish-demo (compositing benchmark) at 2560x1440 on + Ironlake but regresses tiger-demo by 2x (spans benchmark). + + So experiment with this compromise and allow for changing the default + tiling. + + Signed-off-by: Chris Wilson + +commit 7e4a1b7ed25a881113e197acde62b07f26f2d6ef +Author: Chris Wilson +Date: Thu Nov 24 11:34:51 2011 +0000 + + src/sna/gen5: Replace the precompiled shaders + + Take advantage of a couple of new instructions introduced with Cantiga + to reduce the instruction count inside the shaders and improve + performance by around 10% in the fish-demo. + + Signed-off-by: Chris Wilson + +commit 67ea8808d7f0ce47733a66d8708dcfa0dbec14c1 +Author: Chris Wilson +Date: Thu Nov 24 11:45:38 2011 +0000 + + sna/gen5: Remove the unused SIP + + Signed-off-by: Chris Wilson + +commit 499ed74e979d99bbe1670ad54875fba6055fce5d +Author: Chris Wilson +Date: Thu Nov 24 11:02:01 2011 +0000 + + sna: Tweak cancellation of deferred flush + + The goal is to keep running until the tick after every stops, + irrespective of forced flushes. + + Signed-off-by: Chris Wilson + +commit 35239d207c38e1ae0cb843ed7a72621711cb001e +Author: Chris Wilson +Date: Thu Nov 24 02:51:51 2011 +0000 + + sna: Always call retire following a mmap + + Signed-off-by: Chris Wilson + +commit 11e0b456de93dae9f7ba4298d8a32b6b60edc503 +Author: Chris Wilson +Date: Thu Nov 24 03:04:09 2011 +0000 + + sna/gen5: Use the BLT rather than flush when copying + + Signed-off-by: Chris Wilson + +commit a44663af9335136cba59b12078c6717992283b62 +Author: Chris Wilson +Date: Thu Nov 24 02:54:43 2011 +0000 + + sna/gen4,gen5: Fix typo and only emit a flush if the video source is dirty + + Signed-off-by: Chris Wilson + +commit 4a27dd287cdb85d80ceaf6b54e7de0c17e01c00d +Author: Chris Wilson +Date: Mon Nov 21 12:56:32 2011 +0000 + + uxa: Make the glamor/uxa transition more verbose + + And so hopefully make it clearer. In the process we restore the flushing + behaviour for UXA back to before the glamor intervention. + + Signed-off-by: Chris Wilson + +commit b0d64a9567d9cb749568448e4ce090b187308028 +Author: Chris Wilson +Date: Mon Nov 21 11:49:49 2011 +0000 + + sna: Correct end-point adjustment for stippling PolySegment + + Reported-by: Roman Jarosz + Reported-by: da_fox@mad.scientist.com + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43134 + Signed-off-by: Chris Wilson + +commit a5353a7c1d1f02b887f61f543c8e4bd4e8bd104f +Author: Chris Wilson +Date: Mon Nov 21 10:58:17 2011 +0000 + + sna/gen4: Use the special composite rect emission for fill_one() + + In order to workaround a bug in the shaders on gen4, we need to flush + the pipeline after every rectangle. The recently introduced fill-one + mechanism for gen4, missed this vital step triggering a random hang with + an otherwise sane batchbuffer (the missing flush is hard to spot!). + + Fixes regression from 86f99379ee5 (sna/gen4: Add fill-one). + + Reported-by: Albert Damen + Reported-by: Fryderyk Dziarmagowski + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43083 + Signed-off-by: Chris Wilson + +commit 3b9479dc39d32fd97f80c1e5e0fac67d36ee5e40 +Author: Chris Wilson +Date: Sat Nov 19 19:12:06 2011 +0000 + + sna: Micro-optimise sna_push_pixels_solid_blt() + + Unroll the byte reversal as we know the row length is word aligned. + + Signed-off-by: Chris Wilson + +commit 297f7680cfd73ab6eb099adca7aefe00e61c9e85 +Author: Chris Wilson +Date: Sat Nov 19 16:11:42 2011 +0000 + + sna: Avoid the NULL damage deref + + Fixes x11perf -wdcircle100 -time 1 -repeat 1 -rop GXxor + + Reported-by: Fryderyk Dziarmagowski + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43084 + Signed-off-by: Chris Wilson + +commit 4a86ec5ddbaf119fd9a32ecd963f7238152d7d28 +Author: Chris Wilson +Date: Sat Nov 19 00:33:28 2011 +0000 + + sna/gen7: Apply recent SNB tuning as applicable + + Signed-off-by: Chris Wilson + +commit fe944d61d53c275a168da2e9515d1e42be81630b +Author: Chris Wilson +Date: Sat Nov 19 00:02:17 2011 +0000 + + sna/gen7: Correct shifts for surface state + + Signed-off-by: Chris Wilson + +commit 70042400fd95f613b9547d0a72d6288abcc2357d +Author: Chris Wilson +Date: Fri Nov 18 23:41:33 2011 +0000 + + sna/gen7: minor tidy of redundant defines + + Signed-off-by: Chris Wilson + +commit f938cd15990d1a851b9d92414545dda37f00c5db +Author: Chris Wilson +Date: Thu Nov 17 13:43:37 2011 +0000 + + glamor: Include glamor cflags and libs for atypical builds + + Signed-off-by: Chris Wilson + +commit eb6148a36a318eb0b4aad865c34b50fedf4b709e +Author: Zhigang Gong +Date: Wed Nov 16 15:04:37 2011 +0800 + + uxa/glamor: Turn on glamor for fill spans and rects + + This commit only enables two glamor functions for + uxa_fill_spans and uxa_poly_fill_rects. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit fbabe60f48006ee664c983082498a863e8beec71 +Author: Zhigang Gong +Date: Wed Nov 16 15:04:36 2011 +0800 + + glamor: Initial commit to introduce glamor acceleration. + + Added one configuration option --enable-glamor to control + whether use glamor. Added one new file intel_glamor.c to + wrap glamor egl API for intel driver's usage. + This commit doesn't really change the driver's control path. + It just adds necessary files for glamor and change some + configuration. + + Reviewed-by: Eugeni Dodonov + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit c4c2eb1fae2518578a56a278afeaec66d544439d +Author: Zhigang Gong +Date: Wed Nov 16 15:04:37 2011 +0800 + + uxa/glamor: Introduce additional access modes to wrap glamor acceleration + + Integrate glamor acceleration into UXA framework. Add + necessary flushing at the following points: + + 1. Flush UXA batch buffer before call into glamor. + 2. Flush GL operations after return from a glamor function. + 3. The point we need to flush UXA batch buffer, we also + need to flush GL operations, for example, in + intel_flush_callback and couple of places in intel_display.c. + + Signed-off-by: Zhigang Gong + Signed-off-by: Chris Wilson + +commit ac7df2919b92c9fe47c6745975e1848932f989e8 +Author: Chris Wilson +Date: Wed Nov 16 23:25:16 2011 +0000 + + Revert "Disable adding normal RTF modes for an eDP" + + This reverts commit 212fa9868767637e8f430485eeb522c99e63fd16. + + The underlying register programming for eDP is now believed to be fixed + as of linux-3.1. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=38012 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41070 + Signed-off-by: Chris Wilson + +commit 24ece4a87e34c27115ffb55f91294bce2bdf1502 +Author: Chris Wilson +Date: Wed Nov 16 23:14:25 2011 +0000 + + configure: Version bump for 2.17.0 release + + Signed-off-by: Chris Wilson + +commit 14b3176962bd535933623d8ed77ba286b077d6f0 +Author: Chris Wilson +Date: Wed Nov 16 23:13:44 2011 +0000 + + NEWS: Release notes for 2.17.0 + + Signed-off-by: Chris Wilson + +commit c259144e3fc52d078b0a78107c38f0f3d3a2bbc1 +Author: Chris Wilson +Date: Wed Nov 16 10:28:23 2011 +0000 + + sna: The block handler is passed an indirect pointer to the timeval + + Signed-off-by: Chris Wilson + +commit bfd2bb40274d1242001d295a4010211fd51b0fc3 +Author: Chris Wilson +Date: Tue Nov 15 10:38:09 2011 +0000 + + sna: Correct dependencies for DRI2 + + Signed-off-by: Chris Wilson + +commit 3771387ad11b5842a83e58a4b373c2acdd827bd2 +Author: Chris Wilson +Date: Tue Nov 15 10:32:34 2011 +0000 + + Compile out UXA if so desired + + Signed-off-by: Chris Wilson + +commit edbeab8c4edf9e0e89d85add485fe659795b6350 +Author: Chris Wilson +Date: Tue Nov 15 10:17:06 2011 +0000 + + sna: Reduce and clarify dependencies + + Signed-off-by: Chris Wilson + +commit 78d4e99fc916e6477edb01c6f24b69ad73adc552 +Author: Chris Wilson +Date: Tue Nov 15 11:06:04 2011 +0000 + + sna: And keep unity happy + + Rewrite the DRI layer to avoid the various bugs and shortcomings of the + Xserver and interfacing with mesa. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38732 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39044 + Signed-off-by: Chris Wilson + +commit aac022cbb3342e7027301a3f8c9add8929edbad6 +Author: Chris Wilson +Date: Mon Nov 14 19:49:29 2011 +0000 + + sna: Optimise single pixel transfers + + Surprisingly frequent. + + Signed-off-by: Chris Wilson + +commit 5647e2981d81fd2b5cdb22d544f83d2d0f9445c9 +Author: Chris Wilson +Date: Mon Nov 14 14:11:56 2011 +0000 + + sna/damage: Always reduce damage for testing PIXMAN_REGION_OUT + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=42414 + Signed-off-by: Chris Wilson + +commit 405b015fe255c75f91b0f3fe93f06bd14faee5a1 +Author: Chris Wilson +Date: Mon Nov 14 14:05:10 2011 +0000 + + sna: Be explicit in all sna_damage_contains_box() tests + + Clarify the exact in/out/maybe expected result when testing. + + Signed-off-by: Chris Wilson + +commit 5d23149647b1645057dbd89087691e873494f763 +Author: Chris Wilson +Date: Mon Nov 14 13:53:37 2011 +0000 + + sna: Remove redundant 'can_fill_spans()' + + Spans are almost always accelerated now... + + Signed-off-by: Chris Wilson + +commit ae9de984adb275e028e7fbcb8b74a3ce11920eed +Author: Chris Wilson +Date: Mon Nov 14 13:39:34 2011 +0000 + + sna: Convert non-FillSolid rectilinear lines to boxes + + And render using the tiled/stippled rect routines instead. + + Signed-off-by: Chris Wilson + +commit e861e816f53989ce3ab3ec89dd1d9a35155f999a +Author: Chris Wilson +Date: Mon Nov 14 13:39:34 2011 +0000 + + sna: Convert non-FillSolid rectilinear segments to boxes + + And render using the tiled/stippled rect routines instead. + + Signed-off-by: Chris Wilson + +commit 6fc2928f578ae1e278c968d5c778d99d56bd667a +Author: Chris Wilson +Date: Mon Nov 14 13:05:00 2011 +0000 + + sna: tidy assignment of composite damage + + Make sure that the damage is always set, even if only to NULL, so that + we are safe if in future the operation state is not initially cleared. + + Signed-off-by: Chris Wilson + +commit 99338ebe61917a07611cbc81cfaf70c0ec905014 +Author: Chris Wilson +Date: Mon Nov 14 12:04:49 2011 +0000 + + sna: Check whether damage can be reduced to all-damage on moving to GPU + + Signed-off-by: Chris Wilson + +commit 00d1c539e4b69636bfc35c0c47a6f1db3a33e731 +Author: Chris Wilson +Date: Mon Nov 14 11:19:42 2011 +0000 + + sna/damage: Add a little more verbosity to debugging + + Signed-off-by: Chris Wilson + +commit 60c0fc101adbc457a7c1927602175f8079175e10 +Author: Chris Wilson +Date: Mon Nov 14 11:12:47 2011 +0000 + + sna: Refactor some common code into the common destroy-gpu-bo function + + Signed-off-by: Chris Wilson + +commit 571457e9a4b0941ec956ef98391e96fe90fb4abc +Author: Chris Wilson +Date: Mon Nov 14 10:31:21 2011 +0000 + + sna: Be more thorough discarding fences for large objects + + Signed-off-by: Chris Wilson + +commit e33dfbe3c00e634328adc7319261e5501f4c7a7a +Author: Chris Wilson +Date: Mon Nov 14 09:41:53 2011 +0000 + + sna/damage: Verify that all-damage covers the entire pixmap after reduction + + Signed-off-by: Chris Wilson + +commit f033172d2f383c7e17362a10f56c4958fb9a3a6b +Author: Chris Wilson +Date: Mon Nov 14 09:32:53 2011 +0000 + + sna: Fix debug compilation + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42887 + Signed-off-by: Chris Wilson + +commit 0c405595fb8739b22569f81f400100b5dfa472cf +Author: Chris Wilson +Date: Mon Nov 14 09:27:49 2011 +0000 + + sna: Downgrade tiling in order to fit within fence constraints + + Fixes a later assert that the fenced size is valid for kgem_create_2d() + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42888 + Signed-off-by: Chris Wilson + +commit 1baff9f8cf79fdb4a5649eabcc66cf73487c873e +Author: Chris Wilson +Date: Mon Nov 14 08:44:35 2011 +0000 + + uxa/gen4+: Re-emit composite invariant after video + + Reported-by: Ben Hutchings + Bugzilla: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=635953 + Signed-off-by: Chris Wilson + +commit 7ad3b377a394c9342c3ab2f003d48b7cb3c0891d +Author: Chris Wilson +Date: Sun Nov 13 17:53:11 2011 +0000 + + sna/video: Use the right pointer for unmapping + + Don't just deference any old random pointer, use the one we actually + mapped in the first place! + + Reported-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42880 + Signed-off-by: Chris Wilson + +commit 8da8809d03734d92c3bcf478fe051077ce3caa29 +Author: Chris Wilson +Date: Sun Nov 13 17:49:23 2011 +0000 + + sna/video: Simplify check for 915G[M] which is simply gen==30 + + Signed-off-by: Chris Wilson + +commit cac335b979a95e31e201f9766d19d737361e09b2 +Author: Chris Wilson +Date: Sun Nov 13 13:13:03 2011 +0000 + + sna/video: Constify a couple of attribute arrays + + Signed-off-by: Chris Wilson + +commit e592eb93dbd7df177993986f01ba6f65c4e20d4a +Author: Chris Wilson +Date: Sun Nov 13 11:16:45 2011 +0000 + + configure: Version bump for 2.16.902 snapshot + + Signed-off-by: Chris Wilson + +commit 56707b97dc746f7b46dd6cf94ba6c1db85ed619c +Author: Chris Wilson +Date: Sun Nov 13 11:16:12 2011 +0000 + + NEWS: Details for 2.16.902 + + Signed-off-by: Chris Wilson + +commit f0acc6c0f15875fd51f6df6c8f13d589f9149771 +Author: Chris Wilson +Date: Sun Nov 13 09:39:47 2011 +0000 + + sna/composite: Attempt to reduce the damage is the operation is contained + + Signed-off-by: Chris Wilson + +commit 87147b63e905c3566ac1c12e0712f068e90d5e2e +Author: Chris Wilson +Date: Sat Nov 12 19:35:43 2011 +0000 + + sna/damage: Reduce the damage for evaluating sna_damage_is_all + + Signed-off-by: Chris Wilson + +commit e8799cdea461df5102d421fda26fecceae79b929 +Author: Chris Wilson +Date: Sat Nov 12 12:19:31 2011 +0000 + + sna: Be stricter and disallow allocation of large fenced objects + + When allocating objects, we need to check the size of the full fenced + regions against the mappable limits in order to be able to mmap the + object later. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42813 + Signed-off-by: Chris Wilson + +commit 0269ec5533ecf7bec0f01c682e085861a3d2ab00 +Author: Chris Wilson +Date: Sat Nov 12 11:49:32 2011 +0000 + + sna: Handle incremental uploads from PutImage + + PutImage rarely uploads the entire image inside a single request, + instead breaking up into scanline segments to fit within the protocol + limits. A few optimisations are based on detecting when we can discard + the GPU bo for an all-dirty CPU pixmap, which are useful in this case so + check for an entirely dirty pixmap following an incremental PutImage. + + Signed-off-by: Chris Wilson + +commit ed68f1b00ae7c0fb3be1f0e758b3683f3c26675b +Author: Chris Wilson +Date: Sat Nov 12 11:13:59 2011 +0000 + + sna/gen7: Fix PRIMITIVE command + + The topology is now an extra dword rather than an embedded field in the + command. + + Signed-off-by: Chris Wilson + +commit 991ffcb60a15f08ebb396d4d4ec86d5aff0ded31 +Author: Chris Wilson +Date: Fri Nov 11 23:20:36 2011 +0000 + + sna: Reset the source counter if we completely dirty the CPU pixmap + + For a long lived pixmap which we are repeatedly using for upload and + copying to other pixmaps, we don't want to keep to maintain a GPU + buffer. So instead, reset the source counter if we discard the GPU bo + and treat the pixmap as purely CPU. + + Signed-off-by: Chris Wilson + +commit 403a4dd353eef67decfba965e40623e8137e1944 +Author: Chris Wilson +Date: Fri Nov 11 14:59:03 2011 +0000 + + sna: Defer source migration for a solitary upload via CopyArea + + Try to avoid allocating a GPU pixmap for PutImage followed by CopyArea. + + Signed-off-by: Chris Wilson + +commit 11acfaa62362660ff303f3afe90d1afa36b9ce73 +Author: Chris Wilson +Date: Fri Nov 11 14:46:33 2011 +0000 + + sna/glyph: Tweak the small mask threshold + + Signed-off-by: Chris Wilson + +commit c6e6ae1829e06ee8fe8eb063f2433cce603c9f96 +Author: Chris Wilson +Date: Fri Nov 11 14:22:38 2011 +0000 + + sna/glyphs: Cache the glyph pixman_image_t wrapper + + Signed-off-by: Chris Wilson + +commit 8f50950f467eb2440009a807081f3ba2c9db209b +Author: Chris Wilson +Date: Thu Nov 10 15:58:36 2011 +0000 + + sna/gen7: Remove stray no-op from GEN7_3DSTATE_SBE + + Signed-off-by: Chris Wilson + +commit 6a8338fc08a1b7e5e2c6722baa87cff3915b6ef9 +Author: Chris Wilson +Date: Thu Nov 10 15:11:13 2011 +0000 + + sna: Begin debugging gen7 + + This is the stub of the decoder, sufficient to give details of the ops + within the batch and to keep the debugger happy. + + Signed-off-by: Chris Wilson + +commit 2309f19638f8b2c35eb60fb44fa988aa5aaab57f +Author: Chris Wilson +Date: Thu Nov 10 11:57:21 2011 +0000 + + sna/dri: Apply the damage for fullscreen async blits + + Otherwise gnome-shell forgets to update. Eventually, I'll get the async + pageflipping bits merged into the Xserver and this path and its extra + bw wastage will be history! But still I'll be undermined by the + compositor, grrr. + + Signed-off-by: Chris Wilson + +commit e65c2c54f5efcec16e97085dbc41042007c39151 +Author: Chris Wilson +Date: Thu Nov 10 11:37:46 2011 +0000 + + sna: Store the sna pointer on the pixmap for cheap lookups + + A large part of the function preamble overhead is the multi-indirection + lookup for retrieving the sna pointer. We can eliminate most of these by + storing a pointer on the Pixmap as well, which we often need to lookup + anyway. + + Signed-off-by: Chris Wilson + +commit bddac63de2d26c6ad4ade2f0a038d756f7a41424 +Author: Chris Wilson +Date: Thu Nov 10 10:55:13 2011 +0000 + + sna: Defer purging a target buffer + + This is to keep the sanity checks upon the caches happy by keeping a + potential flush out of the inactive cache. + + Signed-off-by: Chris Wilson + +commit 9083f7edcb05b1deb7a77c9c5a8b54fe73176648 +Author: Chris Wilson +Date: Thu Nov 10 10:51:32 2011 +0000 + + sna/gen3: Fixup some false asserts + + Signed-off-by: Chris Wilson + +commit ea01f7681901e3181204d3117fc0a23655de631f +Author: Chris Wilson +Date: Thu Nov 10 10:51:01 2011 +0000 + + configure: Force full-debug builds to disable compiler optimisations + +commit a72563464f53f24246379afcf1365206fae9aad3 +Author: Chris Wilson +Date: Thu Nov 10 00:55:55 2011 +0000 + + sna/gen3: Clear the video shader flag upon batch reset + + Fixes regression from 3252b46e1. + + Signed-off-by: Chris Wilson + +commit 3252b46e115e6cc46abbcc4f502feeb9edc31ad6 +Author: Chris Wilson +Date: Wed Nov 9 15:16:04 2011 +0000 + + sna/gen3: Pack video frames + + If you're going to benchmark, you may as well do so favourably. + + Signed-off-by: Chris Wilson + +commit 8e926759528a12076bd7565672acd82a37aa3eb1 +Author: Chris Wilson +Date: Wed Nov 9 14:44:54 2011 +0000 + + sna/video: Pass texture video limits to the client + + Signed-off-by: Chris Wilson + +commit bca58ff6f02b20ccf88937df8e2688f18cabac80 +Author: Chris Wilson +Date: Wed Nov 9 14:18:57 2011 +0000 + + sna: Clear kgem->busy when all requests have been processed + + Signed-off-by: Chris Wilson + +commit 8fdbd01c94c0f6f56247feed8f225901ba39e18e +Author: Chris Wilson +Date: Wed Nov 9 13:14:04 2011 +0000 + + sna/video: Use the normal bo cache for texture video streams + + Signed-off-by: Chris Wilson + +commit 436a78684507129ca1245e065ff68870eb27624b +Author: Chris Wilson +Date: Wed Nov 9 12:48:27 2011 +0000 + + sna: Track purgeability separately from reusability + + Signed-off-by: Chris Wilson + +commit 2699c01a396b644a35a9acb969ab556454be3517 +Author: Chris Wilson +Date: Wed Nov 9 12:27:52 2011 +0000 + + sna: Handle non-reusable bo more correctly during retire + + Signed-off-by: Chris Wilson + +commit fcc89d26600a57317007035fa720915e8a2ade81 +Author: Chris Wilson +Date: Wed Nov 9 12:25:43 2011 +0000 + + sna: Safety first; make all flinked bo unreusable + + Signed-off-by: Chris Wilson + +commit f62b9f94f64f402e731463205635d386386e274e +Author: Chris Wilson +Date: Wed Nov 9 10:15:11 2011 +0000 + + sna/video: Pass cropped source dimensions along with frame data + + So pack all the relevant details into the same structure. + + Signed-off-by: Chris Wilson + +commit 5809b1ad934d6e19dbcf00f1b59e156761ec16b6 +Author: Chris Wilson +Date: Wed Nov 9 09:41:53 2011 +0000 + + sna/video: Tidy up copy routines + + Signed-off-by: Chris Wilson + +commit 1cd06100185a37ee33209fb18362da89f9646e6b +Author: Chris Wilson +Date: Tue Nov 8 17:37:44 2011 +0000 + + sna: Protect against NULL deference of damage after reduction + + Signed-off-by: Chris Wilson + +commit 4b100b099a4d5877c79989e8b3b4ffcd3aa2306f +Author: Chris Wilson +Date: Tue Nov 8 16:30:22 2011 +0000 + + sna: Convert stippled spans to rects + + Signed-off-by: Chris Wilson + +commit 7b95f87b26675af3a1923fef824c45e087098d61 +Author: Chris Wilson +Date: Tue Nov 8 16:18:58 2011 +0000 + + sna: Use the blitter for overlapping lines if the alu doesn't read dst + + Signed-off-by: Chris Wilson + +commit 9a8d3a9dfff8be65b4ab28312ec49dbca36019e0 +Author: Chris Wilson +Date: Tue Nov 8 13:51:00 2011 +0000 + + sna: Avoid the penalty of only writing partial channels with glyphs + + Yes, writing 3 channels is slower than writing 4. But it's okay we + simply ignore the alpha value anyway. + + Signed-off-by: Chris Wilson + +commit 576c5169efd068c364fb7d266fbb6b1dd2ad3f4d +Author: Chris Wilson +Date: Tue Nov 8 13:27:05 2011 +0000 + + sna: Tidy sna_copy_bitmap_blt + + Signed-off-by: Chris Wilson + +commit 32bbeefb8563ae2ab3a105d0b1c9b55d9587b788 +Author: Chris Wilson +Date: Tue Nov 8 13:17:20 2011 +0000 + + sna: Pack clipped stippled uploads + + This are even more likely to fit inside the immediate payload. + + Signed-off-by: Chris Wilson + +commit 3620cd2d157f3d81ccb76bce2ab813bd1e058878 +Author: Chris Wilson +Date: Tue Nov 8 11:25:14 2011 +0000 + + sna: Begin hooking up valgrind/memcheck + + Signed-off-by: Chris Wilson + +commit aeaadb16093f83c9b830958c5946d4d048ffd26b +Author: Chris Wilson +Date: Tue Nov 8 11:03:19 2011 +0000 + + sna: Handle creation of large Screen pixmap when the GPU is wedged + + Reported-by: Clemens Eisserer + References: https://bugs.freedesktop.org/show_bug.cgi?id=42606 + Signed-off-by: Chris Wilson + +commit 7577d6ea45794b83d2f84b175d453d8a460b0e9b +Author: Chris Wilson +Date: Tue Nov 8 10:24:34 2011 +0000 + + sna: Add some error messages to explain why we failed to create the screen + + Signed-off-by: Chris Wilson + +commit 33256af40b3ce2cf8a899ced1fcbf40e316772e4 +Author: Chris Wilson +Date: Tue Nov 8 09:55:07 2011 +0000 + + sna: Fixes for DBG_NO_HW (i.e. simulated GPU hanges); + + A couple of the recent GPU paths were failing to check for !wedged. + + Signed-off-by: Chris Wilson + +commit 5f0886dae29429f498fb10a12d5dc8de6bd798fc +Author: Chris Wilson +Date: Tue Nov 8 00:02:18 2011 +0000 + + sna/trapezoids: Use ints for the offsets to accommodate multiplication + + Although the original precison need only 16-bits to store the offsets, + after projecting on to the sample grid we need a few more bits of + precision and so need a larger integer type to avoid overflow and render + glitches. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42680 + Signed-off-by: Chris Wilson + +commit 33351d5c3dd912534c54e64ccfc7adc4c6f6ecae +Author: Chris Wilson +Date: Mon Nov 7 22:57:44 2011 +0000 + + sna/glyphs: Bypass masks for single glyphs + + Signed-off-by: Chris Wilson + +commit e4872225ace7e3b129292f5822aa75b84c52beff +Author: Chris Wilson +Date: Mon Nov 7 22:57:05 2011 +0000 + + sna/io: Minor tidy of setting command flags + + Signed-off-by: Chris Wilson + +commit 5ba8ba7421e36bcdf83e84423595326939dbe7cd +Author: Chris Wilson +Date: Mon Nov 7 22:55:10 2011 +0000 + + sna: Avoid overwriting an upload buffer during readback + + Reported-by: Clemens Eisserer + Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42677 + Signed-off-by: Chris Wilson + +commit 8f7a8a80237db77452f02273bd8ade68dfba575f +Author: Chris Wilson +Date: Mon Nov 7 20:08:25 2011 +0000 + + sna/composite: Minor fixes in operator and colour reduction + + Signed-off-by: Chris Wilson + +commit b1234f3d3a27f326b8048e3d6b476021a26e9101 +Author: Chris Wilson +Date: Mon Nov 7 20:07:37 2011 +0000 + + sna: Expand multiplies of two 16-bit values to a full 32-bit range + + Signed-off-by: Chris Wilson + +commit afdf931e61821985b31b339d1f346ddd7c4e9e3c +Author: Chris Wilson +Date: Mon Nov 7 20:06:35 2011 +0000 + + sna: Add some more debugging in the hunt for overflows + + Signed-off-by: Chris Wilson + +commit 8f3c845782fdb2fa8bdf751bdd7dd83ca02c42ac +Author: Chris Wilson +Date: Mon Nov 7 20:05:41 2011 +0000 + + sna/blt: Small cleanups + + Whilst perusing for overflows, remove some redundant conditionals. + + Signed-off-by: Chris Wilson + +commit 8e775cecccebe543d344721d45b2d43ee9f122b3 +Author: Chris Wilson +Date: Mon Nov 7 20:01:33 2011 +0000 + + sna/gen3: Fix false reduction of ComponentAlpha with white source + + The principle behind the opertator reduction of WHITE * maskca is valid, + except that we failed to account for the src/mask transposition when + emitting the vertices - garbage ensued. + + Given that we agressively reduce the shader required for WHITE * maskca, + it does not seem worthwhile to special case the primitive emitter as + well. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42676 + Signed-off-by: Chris Wilson + +commit 65a440543b13e3e605a4a2d6209a460fbbe55736 +Author: Chris Wilson +Date: Mon Nov 7 20:00:20 2011 +0000 + + sna: Fix 16-bit overflow of rowlength for memcpy + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42619 + Signed-off-by: Chris Wilson + +commit d4edbd480445bc6aadd2c9f17262bd4b3eefbca6 +Author: Chris Wilson +Date: Mon Nov 7 11:16:06 2011 +0000 + + sna/glyph: Fallback if we fail to clear the scratch pixmap for the glyph mask + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42663 + Reported-by: Clemens Eisserer + Signed-off-by: Chris Wilson + +commit 05f3e96a69af7750d2d62cf5ba991b89f39bc88a +Author: Chris Wilson +Date: Mon Nov 7 09:28:19 2011 +0000 + + test: Compile fix for make check + + Reported-by: Jeremy Huddleston + Signed-off-by: Chris Wilson + +commit cd3d86037746f3a03c4004c1e3ba6e8281344745 +Author: Chris Wilson +Date: Sun Nov 6 11:13:27 2011 +0000 + + sna: Beware unsigned promotion of int16_t to uint32_t + + Mmakes for an unhappy mempy! + + Signed-off-by: Chris Wilson + +commit 0b9408d972050cb02c1024926c406cd45508a158 +Author: Chris Wilson +Date: Sun Nov 6 09:55:09 2011 +0000 + + sna: Self-intersection of wide PolyLine are only drawn once + + We need to process the union of the PolyLine command if lineWidth!=0 so + we cannot generally feed lineWidth==1 into our special case handler. + Proving the lines do not intersect is as difficult as finding the + intersections and thereby finding the union of the path - so there is no + advantage in adding a check whether a wide line could be special cased. + + Signed-off-by: Chris Wilson + +commit c76714c29d29687f941a9112e80223c817185d53 +Author: Chris Wilson +Date: Sun Nov 6 09:43:47 2011 +0000 + + test: Add a basic line tester + + Starting with exercising drawing of a single segment. + + Signed-off-by: Chris Wilson + +commit c1e1e20fe7875262530a4d522e970985642c3f13 +Author: Chris Wilson +Date: Sat Nov 5 20:59:17 2011 +0000 + + sna: Add the pixman version to the debug output + + Signed-off-by: Chris Wilson + +commit e2165f0e6b0620e3d788546924a2174506fbbde5 +Author: Chris Wilson +Date: Sat Nov 5 19:46:13 2011 +0000 + + sna: For a 32k max window size, we need to handle up to 128k strides + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42619 + Signed-off-by: Chris Wilson + +commit c5d94b21d5c65dcae3e294412a8f20bad347a6d8 +Author: Chris Wilson +Date: Sat Nov 5 14:32:16 2011 +0000 + + sna: Extend the zero-line segments by one + + Fixes misrendering of the wine tabs + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42606 + Signed-off-by: Chris Wilson + +commit 0cf29afda9b061455bc438a22bbbfb1d6db6528e +Author: Chris Wilson +Date: Sat Nov 5 12:36:53 2011 +0000 + + sna/glyphs: Fix clip detection for small masks + + -ENOCOFFEE. + + Signed-off-by: Chris Wilson + +commit d21c30d0b8b08ec85c3b5d9a02a6969f7c8b9315 +Author: Chris Wilson +Date: Sat Nov 5 11:56:17 2011 +0000 + + sna: Constrain GPU pixmaps to always fit within the blitter + + Otherwise we end up always doing expensive readbacks where we would + obviously prefer it if we simply used cached memory for the CPU + operation and then upload. + + Signed-off-by: Chris Wilson + +commit e309cea3ae5c22c58a918008a52e3d8d694c9ff2 +Author: Chris Wilson +Date: Sat Nov 5 11:28:06 2011 +0000 + + sna: Do the supported PictOp check first + + There is no point even attempting a BLT operation if we know that it is + an unusual render operation. + + Signed-off-by: Chris Wilson + +commit ab3d6d878fa27515eb760107d963d522cc87cd77 +Author: Chris Wilson +Date: Sat Nov 5 10:08:02 2011 +0000 + + sna: Render small glyph masks on the CPU + + Signed-off-by: Chris Wilson + +commit c25cf434d81ac1b4da29c9c75ca1d7c28be71d04 +Author: Chris Wilson +Date: Sat Nov 5 01:04:54 2011 +0000 + + sna/gen3: Initiailse the op for fill_boxes() + + After removing the memset(0), a couple of fields where left + uninitialised, causing potential rendering glitches. + + Signed-off-by: Chris Wilson + +commit 96e760ea7589cbe953bd0a6f2f41980a7f1c4795 +Author: Chris Wilson +Date: Sat Nov 5 01:04:24 2011 +0000 + + sna: s/flush/vblank/ fixes for DBG() + + Signed-off-by: Chris Wilson + +commit 676cb4e38dc381b2ef4fb092b66db80687aa5013 +Author: Chris Wilson +Date: Fri Nov 4 23:30:09 2011 +0000 + + sna: Run the deferred flush at vrefresh + + This helps to reduce the perceived jerkiness of the redraw. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42413 + Signed-off-by: Chris Wilson + +commit 8052c3904a1ac0308846ac13534c4c76bb96d5dd +Author: Chris Wilson +Date: Fri Nov 4 21:14:23 2011 +0000 + + sna: Drain the delayed timer after forcing a flush + + The goal is to remove a spurious wakeup when we have no work outstanding + afterwards and so would end up prematurely disabling the timer. + + Signed-off-by: Chris Wilson + +commit 112c61f6557c2337d5f1b25eb71d0dc9ada6ec89 +Author: Chris Wilson +Date: Fri Nov 4 21:13:55 2011 +0000 + + sna: Convert GXcopy with -1 to GXset + + Signed-off-by: Chris Wilson + +commit 573b23c6b618af808d3236395bbf4f4993b406e5 +Author: Chris Wilson +Date: Fri Nov 4 15:57:24 2011 +0000 + + sna: Add some asserts to detect buffer overflow. + + Signed-off-by: Chris Wilson + +commit 4ba55c3d110ba51400a72da7d4f4c62efcea1335 +Author: Chris Wilson +Date: Fri Nov 4 15:55:15 2011 +0000 + + sna/gen5: Prefer using the BLT for many solid fills + + Even if it means incurring a context switch, the BLT unit is + significantly faster so long as we do enough fills. And there is the + catch ;-) + + Signed-off-by: Chris Wilson + +commit 703cf8abdbcda783e2bb0ceb423909ee8ca98176 +Author: Chris Wilson +Date: Fri Nov 4 15:24:57 2011 +0000 + + sna: Add earlier guards against to wedged to sna_glyph_blt + + Signed-off-by: Chris Wilson + +commit fc415ec3d3e982d89d7a25db8d5fd18e0412a99b +Author: Chris Wilson +Date: Fri Nov 4 13:53:17 2011 +0000 + + sna/gen5: Also experiment with lazy spans here + + Signed-off-by: Chris Wilson + +commit 567cfa508f788b4dd5de9aafbe2f148bb6a8dbc6 +Author: Chris Wilson +Date: Fri Nov 4 13:43:03 2011 +0000 + + sna/gen6: Enable spans interface for boxes + + Signed-off-by: Chris Wilson + +commit 465515a1446fd05fdc4691522803c94515187b4c +Author: Chris Wilson +Date: Fri Nov 4 13:40:13 2011 +0000 + + sna: Silly compile fix, escaped when testing uxa + + Signed-off-by: Chris Wilson + +commit a26c5d44ccaa7e9ff931948032b073f0a550343a +Author: Chris Wilson +Date: Fri Nov 4 12:36:40 2011 +0000 + + uxa: Ensure that alphaMaps are mapped into the CPU for fallbacks + + Reported-by: Hans-Peter Budek + Signed-off-by: Chris Wilson + +commit 34758895cdd93bd7671a78464e79b3891bca113d +Author: Chris Wilson +Date: Fri Nov 4 11:57:09 2011 +0000 + + sna: Ensure operations on a ShmPixmap are synchronous with clients + + If we are rendering to or from a ShmPixmap, we need to be sure that the + operation is complete prior to sending an XSync response to client in + order to preserve mixed rendering coherency. + + Signed-off-by: Chris Wilson + +commit 5525691eb024f2a04b486652c24e0e34176fdd5e +Author: Chris Wilson +Date: Fri Nov 4 10:49:48 2011 +0000 + + sna/gen6: Poor man's spans layered on top of the exisiting composite + + Performance of this lazy interface looks inconclusive: + + Speedups + ======== + xlib swfdec-giant-steps 1063.56 -> 710.68: 1.50x speedup + xlib firefox-asteroids 3612.55 -> 3012.58: 1.20x speedup + xlib firefox-canvas-alpha 15837.62 -> 13442.98: 1.18x speedup + xlib ocitysmap 1106.35 -> 970.66: 1.14x speedup + xlib firefox-canvas 33140.27) -> 30616.08: 1.08x speedup + xlib poppler 629.97 -> 585.95: 1.08x speedup + xlib firefox-talos-gfx 2754.37 -> 2562.00: 1.08x speedup + Slowdowns + ========= + xlib gvim 1363.16 -> 1439.64: 1.06x slowdown + xlib midori-zoomed 758.48 -> 904.37: 1.19x slowdown + xlib firefox-fishbowl 22068.29 -> 26547.84: 1.20x slowdown + xlib firefox-planet-gnome 2995.96 -> 4231.44: 1.41x slowdown + + It remains off and a curiosity for the time being. + + Signed-off-by: Chris Wilson + +commit 5dba7028cd5024282b601c41ddfc9081eaa1d189 +Author: Chris Wilson +Date: Fri Nov 4 11:24:03 2011 +0000 + + sna: Make sure the alpha map is accessible by the CPU on fallbacks + + Signed-off-by: Chris Wilson + +commit 70c9e70f35af21de2b5b56d72f2a9e7fe9ed49d6 +Author: Chris Wilson +Date: Fri Nov 4 10:19:21 2011 +0000 + + sna: Don't reuse partial vmapped bo + + A fun use after free. + + Signed-off-by: Chris Wilson + +commit 7e8c9a5b8b1625fdfe885740c36da3f4c1373ee6 +Author: Chris Wilson +Date: Wed Nov 2 14:02:56 2011 +0000 + + sna: Submit the batch on the next blockhander if operation overflows + + If an operation overflows from one batch into another, we submit the + complete batch and begin a new. That new batch will not be submitted + unless it is filled or on the next delayed flush update. This can cause + a flicker as a large operation is broken up, such as performing a + CopyArea through a Clipmask. So if we submit a full batch during a flush + interval, immediately flush any partial batch at the next blockhandler. + + This stops rude Santa flashing Rudolf in xsnow! + + Signed-off-by: Chris Wilson + +commit 5b21838471651a59d3e425c05a389c3f9196e21d +Author: Chris Wilson +Date: Thu Nov 3 22:51:24 2011 +0000 + + sna: Compute the correct extents for the PolyRectangle + + Otherwise we may leave one behind... + + A regression from the introduction of sna_poly_rectangles: + 40af32a0e9ed971a1f2c2a45266f32016bda7ed3 (sna: Execute blits directly + for PolyRectangle) + + Reported-by: Matti Hamalainen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42568 + Signed-off-by: Chris Wilson + +commit 2174f840158aa9cfa370ade38be28f8dc8e4b526 +Author: Chris Wilson +Date: Thu Nov 3 20:41:31 2011 +0000 + + uxa: Remove caching of surface binding location + + If the pixmap were to be used multiple times within a batch with + mulitple formats, the cache would only return the initial location with + the incorrect format and so cause rendering glitches. For instance, GTK+ + uses the same pixmap as an xrgb source and as an argb mask in order to + premultiply and composite in a single pass. Rather than introduce an + overly complication caching (handle, format) mechanism, kiss and remove + the invalid implementation. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40926 + Signed-off-by: Chris Wilson + +commit a1b40a20bbba4b70990a8983a2916d3d5850d828 +Author: Chris Wilson +Date: Thu Nov 3 19:27:23 2011 +0000 + + sna: Support binding of a bo for multiple formats + + Applications may use the same pixmap with multiple formats within the + same operation. For instance, you can premultiply and composite a normal + pixmap in this manner. However, as we reused the sampler binding + locations of the source (without an alpha channel) for the mask, we + failed to read and multiply by the alpha channel causing it to remain + black instead of transparent. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40926 + Signed-off-by: Chris Wilson + +commit 31c5eb8e906bf8e59743372edb2d703b50cd311e +Author: Chris Wilson +Date: Thu Nov 3 17:07:48 2011 +0000 + + sna: Clean up the fallback code for glyphs + + Signed-off-by: Chris Wilson + +commit fa0fefd638d148d48760c95fe05520cddd96e5a4 +Author: Chris Wilson +Date: Thu Nov 3 15:33:25 2011 +0000 + + sna: Restore the lowlevel glyph routines for the sake of Damage + + Damage bypasses the Text interface, preventing the backend from hooking + into the font and storing private glyph representations, and calls + directly into the Glyph routines. So to prevent a segfault we have to + restore them. + + Signed-off-by: Chris Wilson + +commit 1677b273af67e2b690bd21a1b43a7d9f9d5a70c1 +Author: Chris Wilson +Date: Thu Nov 3 14:31:53 2011 +0000 + + sna: Skip encoding zero sized glyphs + + Signed-off-by: Chris Wilson + +commit 239cfb99f9697392d7c25328093e6662ad04bdc9 +Author: Chris Wilson +Date: Thu Nov 3 14:25:54 2011 +0000 + + sna: Unroll the quadword upload of the glyph data + + We know that the length is nicely aligned and so can avoid a relatively + expensive call into memcpy. + + Signed-off-by: Chris Wilson + +commit e2542bad88573e590ef4cbeed6b5884166b56adb +Author: Chris Wilson +Date: Thu Nov 3 14:17:05 2011 +0000 + + sna: Add the missing returns to prevent fbImageGlyphBlt fallbacks + + Signed-off-by: Chris Wilson + +commit bc032c9be1bab7477fbf4b2a64fb7aca6d75ac18 +Author: Chris Wilson +Date: Thu Nov 3 11:47:18 2011 +0000 + + sna: Coalesce reduction of cpu damage + + Signed-off-by: Chris Wilson + +commit c92671b33ef30a8eb723eb366692ae3a5878b8f9 +Author: Chris Wilson +Date: Thu Nov 3 11:47:18 2011 +0000 + + sna: Coalesce reduction of gpu damage + + Signed-off-by: Chris Wilson + +commit 3b4a508eb022e9ade5929d3ebc97e0f9216a80b1 +Author: Chris Wilson +Date: Thu Nov 3 00:32:29 2011 +0000 + + sna: Translate glyphs into MSBFirst upon initial load + + Signed-off-by: Chris Wilson + +commit 8a259e34d3295af3be864e4fae96e6c3a9a632c7 +Author: Chris Wilson +Date: Thu Nov 3 01:05:52 2011 +0000 + + sna: gc->miTranslate is always 1 + + So we can perform some constant folding and eliminate dead code. + + Signed-off-by: Chris Wilson + +commit 8f68f9e5f8341e20c4e1e46044f79806a44ecd03 +Author: Chris Wilson +Date: Thu Nov 3 00:59:46 2011 +0000 + + sna: Trimming is redundant given that we always have a CompositeClip + + Signed-off-by: Chris Wilson + +commit f4bdd84b846e6e778b7c496e7ed0d51e77310f36 +Author: Chris Wilson +Date: Thu Nov 3 00:48:10 2011 +0000 + + sna: Simplify the uncommon check for gpu-only damage by using damage-all + + The use of a gpu-only scratch bo is uncommon with the core acceleration + routines, and we can eliminate the check for not incrementing the damage + by allocating a damage-all and using the common optimisation of + reduce_damage(). + + Signed-off-by: Chris Wilson + +commit 353fa4218cd904857fe95ef140e7f38aefe07578 +Author: Chris Wilson +Date: Wed Nov 2 22:53:51 2011 +0000 + + sna: Don't call into retire unless there are outstanding requests + + Signed-off-by: Chris Wilson + +commit 6fdd0f254d2e58d425d6d23023e9db3d2924c6be +Author: Chris Wilson +Date: Wed Nov 2 22:23:16 2011 +0000 + + sna: Use an integer value for the sentinel + + clang complains otherwise. + + Signed-off-by: Chris Wilson + +commit 1073c78f6cebfd6380b53dd891b7a72e50f398d6 +Author: Chris Wilson +Date: Wed Nov 2 22:14:40 2011 +0000 + + sna: Pack small 1-bpp uploads into immediate buffers + + Signed-off-by: Chris Wilson + +commit 73b2ef5a7de8d733fa1821e5010480ede305e25e +Author: Chris Wilson +Date: Wed Nov 2 22:02:51 2011 +0000 + + sna: gc->pCompositeClip always exists after validate + + Signed-off-by: Chris Wilson + +commit 6fd0754e9c81164ca0fdcf96ba2bfb419568187f +Author: Chris Wilson +Date: Wed Nov 2 18:03:07 2011 +0000 + + sna: defer calling fbValidateGC until we fallback + + A secondary effect is that this prevents needless migration of the + tiling pixmap which we want to optimistically keep on the GPU. + + Signed-off-by: Chris Wilson + +commit 6f8875e216194474e818ba6e743e7c22b817f96e +Author: Chris Wilson +Date: Wed Nov 2 15:41:40 2011 +0000 + + sna: Wait an extra interval before switching off periodic updates + + Signed-off-by: Chris Wilson + +commit def6b5e733e623333abf596bbdbabf8dd0ac8b00 +Author: Chris Wilson +Date: Wed Nov 2 14:35:45 2011 +0000 + + sna: Only execute the accel block handler if we are about to block + + Signed-off-by: Chris Wilson + +commit 088b875affb8655010bc678ca4a3e87703c92daf +Author: Chris Wilson +Date: Wed Nov 2 13:11:04 2011 +0000 + + sna: Use the packed 8x8 stipple for non-repeating small rectangles + + Signed-off-by: Chris Wilson + +commit 0c373db73d1d2b7cf844653307c60a3891a3cc10 +Author: Chris Wilson +Date: Wed Nov 2 12:43:55 2011 +0000 + + sna: Fix the 8x8 stippled pattern origin + + Signed-off-by: Chris Wilson + +commit 9cdf8be55029f30b47cfc39ddd2754d40602cf2c +Author: Chris Wilson +Date: Wed Nov 2 12:17:31 2011 +0000 + + sna: Add clipped stippled upload support + + For xsnow! + + Signed-off-by: Chris Wilson + +commit 6553c9e1cbfcecf781ba106de99f9e70c6d373ba +Author: Chris Wilson +Date: Wed Nov 2 10:03:45 2011 +0000 + + sna: Quieten a fewer compiler sign compare warnings + + Signed-off-by: Chris Wilson + +commit 42e2036cda6b76f2b64e28a81bdaa661e4cbffa5 +Author: Chris Wilson +Date: Tue Nov 1 20:56:48 2011 +0000 + + sna: Use bo for scratch pixmaps allocated by the dix/mi routines + + Now that we have the rudiments of accelerated deep-plane copies, we can + begin to benefit from using BO for the core dix/mi routines like + ShmPutImage. + + Signed-off-by: Chris Wilson + +commit 45cc952994e169590ac4300f4ccf54810377f7f2 +Author: Chris Wilson +Date: Tue Nov 1 20:20:35 2011 +0000 + + sna: Fix debugging assertions for Composite + + When comparing drawable clip extents against pixmap boundaries we need + to include the pixmap screen offset on a Composited desktop. + + Signed-off-by: Chris Wilson + +commit ebc9f3966d28343aebeba6886500abf511631785 +Author: Chris Wilson +Date: Tue Nov 1 19:47:51 2011 +0000 + + sna: Accelerate deep-plane copy + + Signed-off-by: Chris Wilson + +commit e0fd07bc251296784bf70f02877765171a053cc6 +Author: Chris Wilson +Date: Tue Nov 1 17:02:17 2011 +0000 + + sna: Accelerate XYPixmap upload when using GXcopy + + Mostly for the lols. + + Signed-off-by: Chris Wilson + +commit 22c43efe6b9b5f669593aa9f3af6ee437426c5d2 +Author: Chris Wilson +Date: Tue Nov 1 13:43:23 2011 +0000 + + sna: Implement 8x8 stippled rect fills + + Signed-off-by: Chris Wilson + +commit c58b7643e9b86599a41ede516a778bd9869adc8e +Author: Chris Wilson +Date: Tue Nov 1 10:13:20 2011 +0000 + + sna: Accelerate 1bpp uploads + + These still get used (see Wine and Swing) by applications which like to + do "crisp" 1-bit rendering on the client side and then put onto the + scanout. So avoid the readbacks, and push them through the BLT instead. It + turns out to be faster than using fb too, bonus! + + Signed-off-by: Chris Wilson + +commit 8939ddbc27efedbb3e446dd26425a6bed39577f2 +Author: Chris Wilson +Date: Mon Oct 31 17:45:02 2011 +0000 + + sna: Improve rendering of thin segments + + Signed-off-by: Chris Wilson + +commit 98b830a975e04685455b244a8414a293857cbd00 +Author: Chris Wilson +Date: Mon Oct 31 17:41:27 2011 +0000 + + sna: Improve rendering of thin lines + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42443 + Signed-off-by: Chris Wilson + +commit 6a5834ae560ef3b05c42b58ee0654316a66eaed0 +Author: Chris Wilson +Date: Mon Oct 31 16:28:59 2011 +0000 + + sna/gen3: Fix invalid assert + + SHADER_CONSTANT is expected here, the other IMMEDIATES however should + have already been handled. + + Signed-off-by: Chris Wilson + +commit e12375d05bfb32933897b62829d82c6f1aa81d70 +Author: Chris Wilson +Date: Mon Oct 31 14:24:19 2011 +0000 + + sna: Fix a few minor cut'n'paste errors + + Use the constant value [last_box-box] where applicable. + + Signed-off-by: Chris Wilson + +commit 20a4f533958991557a3b05af00f2856657579d68 +Author: Chris Wilson +Date: Mon Oct 31 14:14:40 2011 +0000 + + sna: Apply the GPU damage for clipped PolyFillRectangles + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42425 + Signed-off-by: Chris Wilson + +commit 7172f28c2b36aaa8c3a74ae4a7f699d3d4af10eb +Author: Chris Wilson +Date: Mon Oct 31 12:53:35 2011 +0000 + + sna: Fix placement of clipped wide PolyRectangle + + Signed-off-by: Chris Wilson + +commit 59535d0e1c587cfe9249ab1baf9acf8470b49b8b +Author: Chris Wilson +Date: Mon Oct 31 12:10:52 2011 +0000 + + sna: Set the flush interval based on output vrefresh + + Rather than a blank 25Hz, use twice the vblank interval to hopefully + avoid bad values. + + Signed-off-by: Chris Wilson + +commit 9a2e59bfba6748325918f895b3e58351c7eb4baa +Author: Chris Wilson +Date: Mon Oct 31 11:56:53 2011 +0000 + + sna: Fix reversal of zero/wide for PolyRectangle + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42414 + Signed-off-by: Chris Wilson + +commit b1287e49347e0fff67f43d157fa87758d5cbe588 +Author: Chris Wilson +Date: Mon Oct 31 11:27:36 2011 +0000 + + sna/video: Fix copy region for cropped video + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42412 + Signed-off-by: Chris Wilson + +commit b4ab412cb3eb8d37a33f5eeae5c613090ad2df0f +Author: Chris Wilson +Date: Mon Oct 31 10:37:43 2011 +0000 + + sna/blt: Optimise fill with GXcopy and pixel==0 to a GXclear + + Signed-off-by: Chris Wilson + +commit 088728ad26c7efc2d65b97ff22d526c65a0fa442 +Author: Chris Wilson +Date: Mon Oct 31 10:04:35 2011 +0000 + + sna/blt: Don't idiotically override alu for pixel==0 and track alu + + Another classic and utterly stupid mistake. At least I was consistent in + my error. + + Reported-by: Clemens Eisserer + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42414 + Signed-off-by: Chris Wilson + +commit 9c399c74adc5e5bc7d425382a74d84315d2cef02 +Author: Chris Wilson +Date: Mon Oct 31 09:20:54 2011 +0000 + + sna: Add an option to disable the delayed flush + + Section "Device" + Option "DelayedFlush" "False" + EndSection + + Signed-off-by: Chris Wilson + +commit c8860ce26eaa8f9e876af2354d61c35338076ac8 +Author: Chris Wilson +Date: Sun Oct 30 23:25:48 2011 +0000 + + sna: Report whether anything was retired to the inactive list + + So that we can skip a fresh search of the inactive list if nothing + changed. + + Signed-off-by: Chris Wilson + +commit a7adcc8e47ba550e7c36a6543a6e0d99040c7354 +Author: Chris Wilson +Date: Sun Oct 30 21:19:35 2011 +0000 + + sna: Stash the last scratch pixmap + + Signed-off-by: Chris Wilson + +commit c8d4f5d32af94f712cc81ff495b19907261759ea +Author: Chris Wilson +Date: Sun Oct 30 21:21:25 2011 +0000 + + sna: Correct PolyRectangle verticals to be the end-point not the length + + Fixes an off-by-one in the drawing of the rectangles caused by a + too-literal translation of the rectangles into boxes. + + Signed-off-by: Chris Wilson + +commit 5c45622b889ba66b6476241601e1458d219c45ba +Author: Chris Wilson +Date: Sun Oct 30 17:49:19 2011 +0000 + + uxa/glyphs: Fallback rather than fail to render with a non-solid Source + + Reported-by: Uli Schlachter + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31819 + Signed-off-by: Chris Wilson + +commit e6eb803cb44b01e300fb4b08304227a430912beb +Author: Chris Wilson +Date: Sun Oct 30 17:44:26 2011 +0000 + + sna: Loop over all clip rects for glyph blt rather than fallback + + Signed-off-by: Chris Wilson + +commit 1eefb75c91fb769551b485f1b2c6b59023c69906 +Author: Chris Wilson +Date: Sun Oct 30 17:17:36 2011 +0000 + + sna: Don't mess with NDEBUG + + This is set in configure and redefining it later inside the C files just + leads to trouble and broken compilation. + + Signed-off-by: Chris Wilson + +commit 7237374a03d1e0c2e6c0b2d0eb42afc8df25df0d +Author: Chris Wilson +Date: Sun Oct 30 16:46:10 2011 +0000 + + configure: Bump version to 2.16.901 + +commit 0a78a75e75225d89e465804c482a667840a2c8de +Author: Chris Wilson +Date: Sun Oct 30 16:45:46 2011 +0000 + + NEWS: Add release notes for 2.16.901 + +commit c7552cb819ae8c90975193c159236e0070628dd9 +Author: Daniel Vetter +Date: Sun Oct 30 16:35:14 2011 +0100 + + i810: kill mmio vga access helpers + + Signed-Off-by: Daniel Vetter + +commit e8b8adeab3b2e69a8684217271604a5f658f617d +Author: Daniel Vetter +Date: Sun Oct 30 16:34:05 2011 +0100 + + i810: use vgahw functions instead of roll-your-own + + Signed-off-by: Daniel Vetter + +commit 4aeea489ed3189d7ebcae4199153c1ae736ebf68 +Author: Daniel Vetter +Date: Sun Oct 30 16:07:45 2011 +0100 + + i810: rip out PIO access functions + + All the io done at init time is already converted to libpciaccess + + Signed-Off-by: Daniel Vetter + +commit e735636194671e221eca3e86b9bd06fd0d4b6c5a +Author: Daniel Vetter +Date: Sun Oct 30 15:51:49 2011 +0100 + + i810: kill dead i830 defines + + Signed-Off-by: Daniel Vetter + +commit bb840ee09fa620648065884306fbe3e0da37ad77 +Author: Chris Wilson +Date: Sun Oct 30 16:13:04 2011 +0000 + + sna: Convert PolyRectangles to use Box32 + + For the same overflow protection. + + Signed-off-by: Chris Wilson + +commit af52e234a78bbde964a93ef8cce21f41a5c959f3 +Author: Chris Wilson +Date: Sun Oct 30 15:34:34 2011 +0000 + + sna: Fix compilation + + Remember to drink coffee and compile "obvious" fixes before pushing. + + Signed-off-by: Chris Wilson + +commit 23b314729c43101e515e2625db2a2401c72c2596 +Author: Chris Wilson +Date: Sun Oct 30 15:24:21 2011 +0000 + + sna: Rewrite box32_add_rect() to enable int32_t promotion + + Signed-off-by: Chris Wilson + +commit 427622aca31b7463eb2dcd52e352dc8997e84baa +Author: Chris Wilson +Date: Sun Oct 30 12:02:42 2011 +0000 + + sna: Push overflow detection to the end of extents + + Removes a couple of conditionals from the middle of the hotpath and on + Intel we are not realising the benefit of only utilising 16-bit values. + + Signed-off-by: Chris Wilson + +commit 2d3aba8518ae790325c6123dacc3ce73b6e91cbd +Author: Chris Wilson +Date: Sun Oct 30 11:22:26 2011 +0000 + + Revert "sna: Don't flush the render caches if in the process of writing again" + + This reverts commit 15266e1b9500f6b348661c60d1982bde911f2d0e. + + KDE relies upon the ability to render into a sampler and then render + upon itself. Not the first sign of madness... + + Will have to find another way of winning back the compwinwin + performance. + +commit d4062705178856cffc83030fa40f758e9d884566 +Author: Chris Wilson +Date: Sun Oct 30 10:40:32 2011 +0000 + + sna/composite: Fix incorrect operator reduction for RenderFillRectangles + + As exemplified by KDE (using Kate) on gen3, it would attempt to render a + large set of boxes using OVER and a transparent colour. As gen3 copied + across some of the BLT assumptions, it was incorrectly reducing that to + a CLEAR and thus rendering incorrectly. + + Signed-off-by: Chris Wilson + +commit da3f8656744f7c801608c7c89a859c0f7dc9e6e0 +Author: Jeremy Huddleston +Date: Sat Oct 29 20:15:11 2011 -0700 + + Use malloc/calloc/realloc/free directly + + Signed-off-by: Jeremy Huddleston + +commit 17ba07a7befc7f442ae1c917a087ac026516d886 +Author: Chris Wilson +Date: Sat Oct 29 20:03:37 2011 +0100 + + sna/gen3: Set the src flags for fill + + A regression from c2040fb8e62076d87f7a5b407505ee3f3482945e (sna: Remove + the memset(0) of the fill op) left the flags for the source channel + uninitalised leaving the shader construction undefined and causing + visual glitches. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42367 + Signed-off-by: Chris Wilson + +commit 4835fe5b2e19ac456773565399f334845f7442c0 +Author: Chris Wilson +Date: Sat Oct 29 18:56:29 2011 +0100 + + sna/genX: Improve reduction of Render operator to BLT alu + + This appeared to introduce a visual gitch into the xfce4 selection box + on gen6 at least. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42367 + Reported-by: Paul Neumann + Signed-off-by: Chris Wilson + +commit 33383fde55609fb4bd372d2d41a6254799499225 +Author: Chris Wilson +Date: Sat Oct 29 12:53:15 2011 +0100 + + sna: Tweak PolyRectangle blitting + + A box of height/width 1 and lineWidth 0 can also be drawn with a single + box as the far edge is contiguous with far side of the near edge. + + Signed-off-by: Chris Wilson + +commit 64a57c8dbec81f6420ff032985237eb16cebfb87 +Author: Chris Wilson +Date: Sat Oct 29 11:01:51 2011 +0100 + + sna: Further clipping bugs + + Make sure the line is clipped to the current clip box and discard if the + clip is reduced to nothing. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=42361 + Signed-off-by: Chris Wilson + +commit 719626ef7918d5cd69d13f983b8b615aefe215d6 +Author: Chris Wilson +Date: Sat Oct 29 10:26:08 2011 +0100 + + sna: Increment clip box when short-circuiting the iteration + + Reported-by: nkalkhof@web.de + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi + Signed-off-by: Chris Wilson + +commit 32a9e0352a1e28509580d84bfc5377d8fae913c4 +Author: Chris Wilson +Date: Fri Oct 28 23:14:24 2011 +0100 + + sna: Retire and search inactive again before creating new buffer + + Attempt to retire an active buffer into the inactive cache before giving + up and creating a new buffer. + + Signed-off-by: Chris Wilson + +commit 15266e1b9500f6b348661c60d1982bde911f2d0e +Author: Chris Wilson +Date: Fri Oct 28 18:00:56 2011 +0100 + + sna: Don't flush the render caches if in the process of writing again + + Signed-off-by: Chris Wilson + +commit d3c7ee921172d4898ebdc6e944812a02426008e9 +Author: Chris Wilson +Date: Fri Oct 28 16:44:16 2011 +0100 + + sna: Faster unclipped rectilinear segments + + Signed-off-by: Chris Wilson + +commit 3cd909cfe9e7d7e97a1d51513a049e312fd9ddae +Author: Chris Wilson +Date: Fri Oct 28 15:48:49 2011 +0100 + + sna: Call miZeroArcLine where appropriate for GPU paths + + Signed-off-by: Chris Wilson + +commit 9921c98df070032e082570f0663f6d3ad0cccd56 +Author: Chris Wilson +Date: Fri Oct 28 14:09:11 2011 +0100 + + sna: Faster unclipped PolyFillRect + + Signed-off-by: Chris Wilson + +commit c1718f96f520874c1fb2af0eb975c7f548762d34 +Author: Chris Wilson +Date: Fri Oct 28 14:01:24 2011 +0100 + + sna: Faster unclipped PolyPoint + + Signed-off-by: Chris Wilson + +commit a4762ed891a50238abddf6c762a053db5c34b87f +Author: Chris Wilson +Date: Fri Oct 28 13:39:17 2011 +0100 + + sna: Call directly into tiled rects for tiled spans. + + As we already know the extents and that this is a candidate for + GPU-acceleration, we can skip over those steps and emit the tiled rects. + + Signed-off-by: Chris Wilson + +commit a02069df2ddc259d65ad468834f7968d283b713f +Author: Chris Wilson +Date: Fri Oct 28 11:30:37 2011 +0100 + + sna: Faster unclipped spans + + Signed-off-by: Chris Wilson + +commit 48eff1676c4066c8b8e069fd579a1b6fc2329960 +Author: Chris Wilson +Date: Thu Oct 27 23:30:06 2011 +0100 + + sna/gen2: Reset BLT registers across 2D/3D context switches + + It appears the hardware trashes the BLT registers after a 3D context + switch, so we need to reload. + + Signed-off-by: Chris Wilson + +commit f006fac72a733e047b9468704e9c9206f62f96f5 +Author: Chris Wilson +Date: Thu Oct 27 21:50:25 2011 +0100 + + sna: Fast path typically unclipped tiled rects + + Signed-off-by: Chris Wilson + +commit d6f543011bf3d03b9298b5ceeddfc1fc20fc534b +Author: Chris Wilson +Date: Thu Oct 27 20:16:35 2011 +0100 + + sna: Use private identifier for internal scratch pixmaps + + This was meant to be a part of the previous commit. + + These are the scratch pixmaps for which we truly do want to allocate + GPU-only. + + Signed-off-by: Chris Wilson + +commit 14a065a267523f9a31be07daaab19b67e9f02290 +Author: Chris Wilson +Date: Thu Oct 27 18:07:53 2011 +0100 + + sna: Create scratch pixmap on the CPU + + Contrary to earlier belief, the only usage of + CREATE_PIXMAP_USAGE_SCRATCH in the dix/mi are either along paths unused + by us or more importantly for operations which are detrimental to create + GPU-only buffers. So create CPU pixmaps instead. + + Signed-off-by: Chris Wilson + +commit 5d52d5009375618bb703909fa0fad04e6d54a2ba +Author: Chris Wilson +Date: Thu Oct 27 17:06:51 2011 +0100 + + sna: Tweak zero line spans to include missing last segment + + Signed-off-by: Chris Wilson + +commit 72e00096351137bd7eb0ae91474657a597836252 +Author: Chris Wilson +Date: Thu Oct 27 16:36:39 2011 +0100 + + sna: Fix advance through clip boxes for fill->boxes + + Signed-off-by: Chris Wilson + +commit c7bd89fb54686c14b687c007e42c34c23423b0fd +Author: Chris Wilson +Date: Thu Oct 27 16:23:35 2011 +0100 + + sna: Fix PolyPoint not to always send 512 boxes + + Just emit the remaining boxes! + + Signed-off-by: Chris Wilson + +commit cfd5b7f6ce80af911bfc8b71bba776ea814e307a +Author: Chris Wilson +Date: Thu Oct 27 15:28:11 2011 +0100 + + sna: Use fill->boxes to pack PolyFillRectangle + + Signed-off-by: Chris Wilson + +commit 8d304f47e35be344550f389158eac3d4c21d9440 +Author: Chris Wilson +Date: Thu Oct 27 14:43:46 2011 +0100 + + sna: Use fill->boxes for rectilinear blits + + Signed-off-by: Chris Wilson + +commit 5d51ff0cf901b808c3cd5aea761d51e6d15b73bf +Author: Chris Wilson +Date: Thu Oct 27 13:57:59 2011 +0100 + + sna: Clip PolyLines to the current clip box + + Signed-off-by: Chris Wilson + +commit 990043f6b8cf8e580aad2e52f8d236a6aec838b5 +Author: Chris Wilson +Date: Thu Oct 27 12:33:55 2011 +0100 + + sna: Handle singular clip regions for PolyRectangles + + Otherwise X will crash! + + Signed-off-by: Chris Wilson + +commit 991582f6678581e3d92c0497e10ecee67536efc2 +Author: Chris Wilson +Date: Thu Oct 27 09:27:41 2011 +0100 + + sna/io: Update batch mode after submitting partial requests + + Signed-off-by: Chris Wilson + +commit 91745de113340c8a281e8cb724b4a7e0b7a0711a +Author: Chris Wilson +Date: Thu Oct 27 09:17:50 2011 +0100 + + sna: Further improve use of fill->boxes for PolyRectangle + + Signed-off-by: Chris Wilson + +commit ffe1bdea82c07a2738743855dfa83494531b41aa +Author: Chris Wilson +Date: Wed Oct 26 18:37:29 2011 +0100 + + sna/blt: After submitting the batch, it will be empty + + Signed-off-by: Chris Wilson + +commit b34e7454574f36796560955fb9d3d33ca00924d6 +Author: Chris Wilson +Date: Wed Oct 26 18:11:25 2011 +0100 + + sna/blt: Convert Copy with color 0 into a Clear + + Signed-off-by: Chris Wilson + +commit 389241aa6469b2e64a58cc0527e3310fdc69ffb7 +Author: Chris Wilson +Date: Wed Oct 26 17:50:38 2011 +0100 + + sna: Suppress an overwritten fill + + Signed-off-by: Chris Wilson + +commit baf78fcddb87eba987163485ad8fd227fb244f29 +Author: Chris Wilson +Date: Wed Oct 26 12:54:13 2011 +0100 + + sna/gen2: Cache the last solid colour for spans + + Signed-off-by: Chris Wilson + +commit ff4715a36999a43cee20cf3474b4ae0af646342c +Author: Chris Wilson +Date: Wed Oct 26 12:40:46 2011 +0100 + + sna/composite: Discard opaque masks + + Signed-off-by: Chris Wilson + +commit 0079579ebd548fc1b490a42928373507a93229bd +Author: Chris Wilson +Date: Wed Oct 26 11:49:53 2011 +0100 + + sna: Fix debug compilation, again. + +commit 5988422455ebb2a3b1cafadc1ff302c35a7a5039 +Author: Chris Wilson +Date: Wed Oct 26 11:47:45 2011 +0100 + + sna: Handle degenerate copy area whilst wedged + + We want to return early to avoid handing the empty box as the lower code + makes the assumption that it has work to do. + + Signed-off-by: Chris Wilson + +commit 3fc7cd2dc8e2b9c0d4143a9f6657f84050ae249a +Author: Chris Wilson +Date: Sun Oct 23 20:59:50 2011 +0100 + + sna/blt: Rename the composite paths + + Whilst re-reading, I found the old naming scheme slightly muddled and + not nearly as descriptive as it should be. Hopefully this slight tweak + reads better in 6 months time. + + Signed-off-by: Chris Wilson + +commit 280325900bf3c17c3177f6e3f52236d6b452e0f3 +Author: Chris Wilson +Date: Sun Oct 23 20:58:48 2011 +0100 + + sna/blt: Share the common fill->boxes between blt and render paths + + Signed-off-by: Chris Wilson + +commit 56f65e65204f1ecbad598419e525e69f6179f9c7 +Author: Chris Wilson +Date: Sun Oct 23 20:40:21 2011 +0100 + + sna: Inline box_intersect() + + Most of this branchy function is spent in manipulating the stack for the + function call, so inline it. + + Signed-off-by: Chris Wilson + +commit f65e73f8a3a013e79b753d625f79994408e717f7 +Author: Chris Wilson +Date: Sun Oct 23 19:55:40 2011 +0100 + + sna: Use fill->boxes to unroll FillSpans + + Signed-off-by: Chris Wilson + +commit 94f9cd40dcdd444d3b5a5598deb0f3d04026df3a +Author: Chris Wilson +Date: Sun Oct 23 19:11:35 2011 +0100 + + sna: Use fill->boxes to unroll PolyPoint + + Signed-off-by: Chris Wilson + +commit 5e08ca75a5eb852c09b9acf6004668bc63f1fe6c +Author: Chris Wilson +Date: Sun Oct 23 17:53:54 2011 +0100 + + sna: Use the new fill->boxes for PolyRectangle + + Signed-off-by: Chris Wilson + +commit efdc7985e2f619ca94cf6ad77ead4f6867ceedc5 +Author: Chris Wilson +Date: Wed Oct 26 14:57:28 2011 +0100 + + self-copy-damage + +commit 0ed3426a810336b666604d34c10f996f318ebf82 +Author: Chris Wilson +Date: Fri Oct 21 23:45:28 2011 +0100 + + sna: Convert diagonal zero-width lines into blits + + This is slower than falling back to swrast for x11perf (up to 4x slower + on SNB), it is still faster than doing that rasterisation through a + WC-mapping and much faster in ordinary usage due to avoiding the + readback hit. + + Signed-off-by: Chris Wilson + +commit c12371d9e7b3bbff7f318186a0933d6108db0bc8 +Author: Chris Wilson +Date: Fri Oct 21 22:28:56 2011 +0100 + + sna: Flatten the branching for fill-spans + + Signed-off-by: Chris Wilson + +commit e7f19d85fead62df21eedc87409b5abacfec4a17 +Author: Chris Wilson +Date: Fri Oct 21 22:15:09 2011 +0100 + + sna/blt: Upload the box using a single 64-bit instruction + + So long as we have 64-bit instructions of course! + + Signed-off-by: Chris Wilson + +commit 40af32a0e9ed971a1f2c2a45266f32016bda7ed3 +Author: Chris Wilson +Date: Fri Oct 21 20:10:02 2011 +0100 + + sna: Execute blits directly for PolyRectangle + + By constructing the batch buffer directly for PolyRectangle, rather than + via miPolyRectangle->(PolyFillRectangle/PolyLine), we dramatically + reduce the CPU overhead and can saturate the GPU. + + Signed-off-by: Chris Wilson + +commit a18f559961135fa288dda3b94207abb0b6d4d302 +Author: Chris Wilson +Date: Fri Oct 21 16:37:09 2011 +0100 + + sna: Fix debug compilation + + Signed-off-by: Chris Wilson + +commit a3a075201c8e47cfad6ec296b7baf549deb44cb3 +Author: Chris Wilson +Date: Fri Oct 21 15:30:52 2011 +0100 + + sna: Treat a bo marked as being last seen on the GPU as requiring a flush + + We are hitting this path upon retiring the old scanout buffer following + a page-flip. We want to treat this as being hot and available for reuse, + so mark it as such until the next retirement pass. + + Signed-off-by: Chris Wilson + +commit 999d13f32162ce11fe4042825b5b849073944ca8 +Author: Chris Wilson +Date: Fri Oct 21 12:43:02 2011 +0100 + + sna: Fast path unclipped points + + Signed-off-by: Chris Wilson + +commit eb80013f4ea50ad4f54b4d1d90c5e9da27e1c34c +Author: Chris Wilson +Date: Fri Oct 21 11:49:55 2011 +0100 + + sna: Fast path for unclipped rectangles + + Signed-off-by: Chris Wilson + +commit d6ae86a51cc49dbba579838edd24a94e8f68294c +Author: Chris Wilson +Date: Fri Oct 21 03:06:20 2011 +0100 + + sna: Optimise reduce_damage() to handle all-damaged pixmaps + + Signed-off-by: Chris Wilson + +commit 5b945b85ee938688412df6adfea488766f4656af +Author: Chris Wilson +Date: Fri Oct 21 02:45:50 2011 +0100 + + sna: Fast-path unclipped fill spans + + Signed-off-by: Chris Wilson + +commit e9a193e9803bb69fc4a7e712f33a36ba395b3c89 +Author: Chris Wilson +Date: Fri Oct 21 02:20:22 2011 +0100 + + sna: Short-circuit GetWindowPixmap() to speed-up pixmap retrieval + + Signed-off-by: Chris Wilson + +commit 662402e41e5c7976002a71a7f961ca97c771b1f3 +Author: Chris Wilson +Date: Fri Oct 21 02:11:19 2011 +0100 + + sna: Micro-optimise PolyLine blt + + Signed-off-by: Chris Wilson + +commit c2040fb8e62076d87f7a5b407505ee3f3482945e +Author: Chris Wilson +Date: Fri Oct 21 02:00:44 2011 +0100 + + sna: Remove the memset(0) of the fill op + + The backends are all expected to initialise the state required. + + Signed-off-by: Chris Wilson + +commit 7e7759db4c1dbf8b782fab9b9ca95cfa1db6cf59 +Author: Chris Wilson +Date: Fri Oct 21 01:41:56 2011 +0100 + + sna: Pass a BoxRec to the fill op + + For many of the core drawing routines, passing a BoxRec for the fill is + more convenient since they already have one generated by the clip + intersection. + + Signed-off-by: Chris Wilson + +commit 98bca2dbb9c33c548b1d9789ddb633ae0389c8f1 +Author: Chris Wilson +Date: Fri Oct 21 01:07:52 2011 +0100 + + sna: Check whether we can blt whilst determining the PolyLine extents + + Signed-off-by: Chris Wilson + +commit 91f49549750aac99d38ae8f3a132c955a2c8d8f5 +Author: Chris Wilson +Date: Fri Oct 21 00:42:43 2011 +0100 + + sna: Speed-up blitting of unclipped lines + + Signed-off-by: Chris Wilson + +commit 06d7574d7da047a6314be5af27f4ac47ccd5a350 +Author: Chris Wilson +Date: Thu Oct 20 21:38:30 2011 +0100 + + sna/damage: Stash the last freed damage for quick reallocation + + Signed-off-by: Chris Wilson + +commit 1471ef82b595a207dc8873c45176ec31f277a43f +Author: Chris Wilson +Date: Thu Oct 20 21:32:14 2011 +0100 + + sna/damage: Only track the mode globally + + As damage accumulation is handled modally, we do not need to track the + mode per elt and so attempt to simplify the code. + + Signed-off-by: Chris Wilson + +commit 1229bf6a690e7f315ab22957da23481f58515ff9 +Author: Chris Wilson +Date: Thu Oct 20 17:37:41 2011 +0100 + + sna: Actually apply the composite offset for the self-copy + + I translated the region to copy by the composite pixmap offset, only + failed to use the translated region for the actual copy command (using + instead the original boxes). Fix that mistake by avoiding the temporary + region entirely and applying the translation inplace. + + We also have to be careful in the case of copying between two composited + windows that have different offsets into the same screen pixmap. + + This fixes the regression introduced with a3466c8b69af (sna/accel: + Implement a simpler path for CopyArea between the same pixmaps). + + Signed-off-by: Chris Wilson + +commit 3526d83e460ce6410f23f59d1315793ff9607253 +Author: Chris Wilson +Date: Thu Oct 20 00:29:52 2011 +0100 + + sna/dri: Perform a little dance to restore the gpu status on release of the bo + + As the bo is outside of our control whilst it is under the influence of + an external renderer, we try to maintain it on the gpu so as to avoid + unnecessary ping-pong. But once it is wholly back under our control, we + want to stop paying the penalty for sharing it. + + Signed-off-by: Chris Wilson + +commit 50b980f12e02401cdd4bc21b970d92e7bd1e6459 +Author: Chris Wilson +Date: Wed Oct 19 21:09:01 2011 +0100 + + sna: Reuse any partial write buffer for readback + + Take advantage of any available temporary buffer that we reuse for + readback knowing that it is the last operation in the batch. + + Signed-off-by: Chris Wilson + +commit 972989276dd3f84c1cedca0494d04f907875f8f3 +Author: Chris Wilson +Date: Wed Oct 19 20:41:14 2011 +0100 + + sna: Add some debug to discern the nature of the Cr fallback + + Signed-off-by: Chris Wilson + +commit fc224e2f8c0200c114f8dbddfc4f5395a3ef0fad +Author: Chris Wilson +Date: Wed Oct 19 20:20:55 2011 +0100 + + sna: Clean up some debug messages for 64bit + + Signed-off-by: Chris Wilson + +commit f4346e5d255f419ee6148f7d69f02560732dd4de +Author: Chris Wilson +Date: Wed Oct 19 19:26:19 2011 +0100 + + sna/blt: Use SCANLINE_BLT for multiple fill boxes + + Signed-off-by: Chris Wilson + +commit d7fb98efdcc1bcc2cca6deb54b16d425b0350196 +Author: Chris Wilson +Date: Wed Oct 19 17:52:56 2011 +0100 + + sna: The initial aperture check for a set of bo is unlikely to fail + + Signed-off-by: Chris Wilson + +commit 3c8e1c5c4cbe703781f2845926f76a9537a971ea +Author: Chris Wilson +Date: Wed Oct 19 16:35:08 2011 +0100 + + sna: Reset the ring flag upon idling + + We track the last ring used when active so as to avoid stalling between + batches. Once the GPU has retired all the pending requests, we can use + whichever ring is preferrable for the next operation without any danger + of stalling upon submission. + + Signed-off-by: Chris Wilson + +commit 594c5f86bb2e1cd0390b360c926ead58ba49979f +Author: Chris Wilson +Date: Wed Oct 19 16:25:42 2011 +0100 + + sna: Don't rewrite the solid colour cache if it hasn't changed + + Signed-off-by: Chris Wilson + +commit 5515f75647bb148d9e720dcc4713a93b59ffbd49 +Author: Chris Wilson +Date: Wed Oct 19 13:49:55 2011 +0100 + + sna: Enlarge the minimum pixmap size to migrate for Render + + This is to workaround a ping-pong issue involving small icons. The + horrible sequence of operations appears to use a tiled FillRect to copy + from the scanout onto to a temporary pixmap, which causes us to + readback from the scanout. We are destined to hit the fallback path there + anyway until we implement stippling... + + References: https://bugs.freedesktop.org/show_bug.cgi?id=41718 + Signed-off-by: Chris Wilson + +commit 87ba33bc0bcaf3c5160edfc61cff3ba0d28d3fd8 +Author: Chris Wilson +Date: Wed Oct 19 13:09:19 2011 +0100 + + sna/damage: Avoid reducing the damage for simple tests + + Signed-off-by: Chris Wilson + +commit 63aa84ef57ff1e55d2df6d680d6bbf88be0619a6 +Author: Chris Wilson +Date: Wed Oct 19 13:08:50 2011 +0100 + + sna/gen6: Apply the unknown blitter death workaround + + Signed-off-by: Chris Wilson + +commit 25f2d181946738d1ac2deb724eb48453c8692ed1 +Author: Chris Wilson +Date: Tue Oct 18 23:03:10 2011 +0100 + + sna: Compute region extents in place to eliminate redundant stack space + + Signed-off-by: Chris Wilson + +commit 1a43b2a46a67fdea215719c4446224c9d2e26a20 +Author: Chris Wilson +Date: Tue Oct 18 17:52:56 2011 +0100 + + sna: Use the unlikely wedged() throughout + + Signed-off-by: Chris Wilson + +commit 7a9c76e1812d106fedf160c959e6e502998e4ce8 +Author: Chris Wilson +Date: Tue Oct 18 15:51:33 2011 +0100 + + sna: Micro-optimise fill-spans + + Signed-off-by: Chris Wilson + +commit 0b83abfb2bc3f65447205048ae0af1a94fa9ef15 +Author: Chris Wilson +Date: Tue Oct 18 14:43:37 2011 +0100 + + sna/gen6: Don't modify composite arguments whilst checking for BLT + + Signed-off-by: Chris Wilson + +commit ae7bd2bf70b42b8c12e5e5ae074891595827a1c0 +Author: Chris Wilson +Date: Tue Oct 18 11:54:05 2011 +0100 + + sna/blt: Move the conditional out of the fill-many hotpath + + Signed-off-by: Chris Wilson + +commit 86f99379ee55b157634174c4c8aad61a30b4f57f +Author: Chris Wilson +Date: Tue Oct 18 11:35:12 2011 +0100 + + sna/gen4: Add fill-one + + Signed-off-by: Chris Wilson + +commit 26c082dbd3f89b987168d321f72e78db8c5ddc2c +Author: Chris Wilson +Date: Tue Oct 18 10:50:53 2011 +0100 + + sna/gen6: Precompute floats_per_rect + + Signed-off-by: Chris Wilson + +commit c69a7989b3c9cedc961e29b1a569b174207964ae +Author: Chris Wilson +Date: Tue Oct 18 10:48:37 2011 +0100 + + sna/gen5: Add fill-one implementation + + Signed-off-by: Chris Wilson + +commit 26a1918290b2d23de72a67805fe5e766da0c5309 +Author: Chris Wilson +Date: Tue Oct 18 10:42:48 2011 +0100 + + sna/gen6: Try continuing with the BLT if the last batch was also BLT + + In the vain hope of reducing switching between rings and introducing + stalls between batches. + + Signed-off-by: Chris Wilson + +commit 4b1398f26d4de44167096c6548ff7384c24d5e06 +Author: Chris Wilson +Date: Tue Oct 18 00:29:18 2011 +0100 + + sna/gen6: Micro-optimise gen6_rectangle_begin + + We can only emit state between primitives, ergo we need only check for + state updates if we've finished the vbo or are starting a new operation. + + Signed-off-by: Chris Wilson + +commit b2d842df5e3198dab401fbd450d4af83d44917dd +Author: Chris Wilson +Date: Mon Oct 17 23:34:19 2011 +0100 + + sna/gen2: Precompute floats-per-rect + + Signed-off-by: Chris Wilson + +commit 729f1ec7869167ff91fa969d06dbdfbf0e8b4126 +Author: Chris Wilson +Date: Mon Oct 17 23:20:20 2011 +0100 + + sna/gen2: Prefer to use the BLT + + Signed-off-by: Chris Wilson + +commit adef3a56cde1210554dc8327baa37c36fc5f18e3 +Author: Chris Wilson +Date: Mon Oct 17 23:08:32 2011 +0100 + + sna/gen3: Prefer to use the BLT where possible for composite ops + + Signed-off-by: Chris Wilson + +commit f40e6ab50b264ef7eb7750f72ab7418c0d3dc9c1 +Author: Chris Wilson +Date: Mon Oct 17 23:06:30 2011 +0100 + + sna/gen3: Prefer to use the BLT to clear the scratch glyph pixmaps + + Signed-off-by: Chris Wilson + +commit 941e3504e049be8af50ca9df2d0aafe9eb477983 +Author: Chris Wilson +Date: Mon Oct 17 19:51:33 2011 +0100 + + sna: Some more debug output for request/bo retirement + + Signed-off-by: Chris Wilson + +commit 1d82fe3e528578d11d2a258b586b67c807eb7cb4 +Author: Chris Wilson +Date: Mon Oct 17 19:47:03 2011 +0100 + + sna: Only retire the flush handler if nothing was submitted within the period + + Signed-off-by: Chris Wilson + +commit 7758e333409409393c4c974adb2831a7b5b18fe4 +Author: Chris Wilson +Date: Mon Oct 17 19:32:44 2011 +0100 + + sna/gen3: Use immediates for black/white solid sources + + Signed-off-by: Chris Wilson + +commit 29ca1a3922cb0e6f3d7b71857a252e5de81941b5 +Author: Chris Wilson +Date: Mon Oct 17 17:16:16 2011 +0100 + + sna/gen3: More removal of memset(0) + + Signed-off-by: Chris Wilson + +commit 88bc10878830dffefda6ed905c1f598d7a7d67ef +Author: Chris Wilson +Date: Sun Oct 16 20:05:49 2011 +0100 + + sna/gen5: Rearrange the BLT->RENDER workaround + + So that we can simply use the pending DRAWRECT as the non-pipelined + flush required following use of a BLT command. + + Signed-off-by: Chris Wilson + +commit 18aed47ba37ccfbcdd72ed251fc97222741c66a7 +Author: Chris Wilson +Date: Mon Oct 17 16:41:14 2011 +0100 + + sna: Fast path common colour conversions + + Signed-off-by: Chris Wilson + +commit a3466c8b69afeda95180fcdc97b56d31f7a1d1ad +Author: Chris Wilson +Date: Sun Oct 16 20:52:47 2011 +0100 + + sna/accel: Implement a simpler path for CopyArea between the same pixmaps + + Signed-off-by: Chris Wilson + +commit 8afa05191a9a337ce6e02b1064de2876f5635435 +Author: Chris Wilson +Date: Mon Oct 17 00:55:51 2011 +0100 + + sna: Improve debug output for mi/fb fallbacks + + Signed-off-by: Chris Wilson + +commit 2b118658d5b9cfa56132f91238f2ea61fba8b357 +Author: Chris Wilson +Date: Mon Oct 17 15:00:01 2011 +0100 + + sna/gen3: Remove memset(0) from fill_boxes + + And initialise only the state used for the operation. + + Signed-off-by: Chris Wilson + +commit f1bb4ebfd8991f2f9eb9c38b9259792c11e7c86a +Author: Chris Wilson +Date: Mon Oct 17 14:22:58 2011 +0100 + + sna/damage: Clear damage->all when subtracting + + I missed clearing the all-damaged flag on the subtract fast paths, + causing us to disregard further GPU damage and losing track of render + coherency. + + Reported-by: Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41769 + Signed-off-by: Chris Wilson + +commit 46f97127c22ea42bc8fdae59d2a133e4b8b6c997 +Author: Chris Wilson +Date: Sun Oct 16 21:40:15 2011 +0100 + + snb,ivb: Workaround unknown blitter death + + The first workaround was a performance killing MI_FLUSH_DW after every + op. This workaround appears to be a stable compromise instead, only + requiring a redundant command after every BLT command with little + impact on throughput. + + Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27892 + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39524 + Tested-by: Daniel Vetter + Signed-off-by: Chris Wilson + +commit 71bf291e563ec5224777b4907a5347a3fbfe64c5 +Author: Chris Wilson +Date: Mon Oct 17 12:53:19 2011 +0100 + + sna/gen3: Micro-optimise gen3_rectangle_begin() + + We only need to emit the vbo description either at the beginning of a + new op (when the state may have changed) or after finishing a full vbo. + + Signed-off-by: Chris Wilson + +commit a032feb2531439b9945d7ae1e0c2e3ab95a960e1 +Author: Chris Wilson +Date: Mon Oct 17 12:41:21 2011 +0100 + + sna/gen3: Store floats_per_rect alongside floats_per_vertex + + Moves a multiply out of the hot path. + + Signed-off-by: Chris Wilson + +commit 2cbe79b85b46796d561105afa980e7a52f4f1889 +Author: Chris Wilson +Date: Mon Oct 17 11:57:07 2011 +0100 + + sna/gen3: Improve reduction of render operator to blt + + Signed-off-by: Chris Wilson + +commit 606e18bd360d904a8aed01aef43644fb4a51d929 +Author: Chris Wilson +Date: Mon Oct 17 10:50:33 2011 +0100 + + configure: Add a check for pixman version + + As SNA requires a fairly recent release and calls directly into pixman. + + Signed-off-by: Chris Wilson + +commit 17acaf8e232a8bad9bc2c653a9fceb06f0f65f6b +Author: Chris Wilson +Date: Mon Oct 17 00:55:51 2011 +0100 + + sna: Defer CPU fallback if fb calls into mi + + If the fb routine does not access the pixel data directly, but instead + calls into an mi routine, we can defer the readback and possibly avoid + it. + + Signed-off-by: Chris Wilson + +commit c348b69f66cbe1cafc88396523da9768e1006889 +Author: Chris Wilson +Date: Sun Oct 16 18:23:33 2011 +0100 + + sna: Prefer to accelerate non-RENDER operations if already using the GPU + + Signed-off-by: Chris Wilson + +commit 6fdc9e3fd3f8defb7ad62de11f8cb069a10e5736 +Author: Chris Wilson +Date: Sun Oct 16 17:57:55 2011 +0100 + + sna: Simplify busy tracking by trusting the bo->gpu flag + + Signed-off-by: Chris Wilson + +commit 30dff81cd62b5fc5a28d5175a08c5a3ee09667bd +Author: Chris Wilson +Date: Sun Oct 16 17:41:34 2011 +0100 + + sna/accel: Upload source to GPU for !copy CopyAreas + + Signed-off-by: Chris Wilson + +commit eefa925e3d3e009b21ecc0b428d93a6c732bfa14 +Author: Chris Wilson +Date: Sun Oct 16 17:39:06 2011 +0100 + + sna/accel: Fall-forward for handling a non-copy CopyArea to a dst gpu bo + + Signed-off-by: Chris Wilson + +commit 01f41e624b31af88d433a25eaefce557e7ff3d62 +Author: Chris Wilson +Date: Sun Oct 16 17:38:26 2011 +0100 + + sna/gen2: Eliminate redundant diffuse and rectlist emission + + Signed-off-by: Chris Wilson + +commit d9e3dbffcb7e6cff35e10100d81544936813095a +Author: Chris Wilson +Date: Sun Oct 16 12:48:23 2011 +0100 + + sna/gen2: Fix fill-one-box + + Lets only have one special gen2 value for the source channel pixel + colour and so remove the confusion and misrendering. + + Signed-off-by: Chris Wilson + +commit b89592b16e373da1fe259ad067f65ba95021dc49 +Author: Chris Wilson +Date: Sun Oct 16 19:39:14 2011 +0100 + + sna/gen7: Add missing tail to 3DSTATE_SBE + + I was a few NULs short of the declared amount. + + Signed-off-by: Chris Wilson + +commit 33f17b996dd0fcbb8e07875770e11571380d6509 +Author: Chris Wilson +Date: Fri Oct 14 12:01:34 2011 +0100 + + Remove a couple of trivial compile warnings for unused variables + + Signed-off-by: Chris Wilson + +commit e5e27528ffeb74f404823c678e04e847cf2109aa +Author: Chris Wilson +Date: Fri Oct 14 11:51:44 2011 +0100 + + sna/blt: Add a pair of operator reductions for opaque fills + + Extend the coverage of the BLT for a couple more composite operations, + though they be relatively infrequent. + + Signed-off-by: Chris Wilson + +commit 3f5289b29962c3e5d94deb30782a156292d20053 +Author: Chris Wilson +Date: Fri Oct 14 11:31:46 2011 +0100 + + sna/trapezoids: Fallback if the composite operation is not supported + + Signed-off-by: Chris Wilson + +commit 3d79264ef8a8be225d9b13efd14f37a7478e6b1b +Author: Chris Wilson +Date: Fri Oct 14 11:31:00 2011 +0100 + + sna/tiling: Hook up composite_box + + Now used for spans and so triggering death by NULL function pointer on + older chipsets. + + Signed-off-by: Chris Wilson + +commit f5f3135e3cc1f4740508773cfefca0954aed2fd3 +Author: Chris Wilson +Date: Fri Oct 14 10:40:39 2011 +0100 + + sna: Ensure that the scanout is flushed before we sleep + + So that we do not see any delayed rendering on i965+. + + Signed-off-by: Chris Wilson + +commit 020d84d2d09c71a8209dd774a0735a3c11cb148d +Author: Chris Wilson +Date: Thu Oct 13 22:32:00 2011 +0100 + + sna/accel: Fix sense of nothing-to-do due to clipping + + A missing not due to a hasty conversion from an assert. + + Signed-off-by: Chris Wilson + +commit b7fd6906c41e328649b97e16c42848a39f6e48f8 +Author: Chris Wilson +Date: Thu Oct 13 17:46:48 2011 +0100 + + sna/accel: Actually apply the clip to the glyph extents + + References: https://bugs.freedesktop.org/show_bug.cgi?id=41718 + Signed-off-by: Chris Wilson + +commit eb5f86b78181b174664aaa9bc689db5421b7e7bd +Author: Chris Wilson +Date: Thu Oct 13 17:32:54 2011 +0100 + + sna/accel: Correctly offset the damage intersection for glyph runs + + Signed-off-by: Chris Wilson + +commit a4766026ad0aa14283e35598d33f13d311cc029b +Author: Chris Wilson +Date: Thu Oct 13 17:32:30 2011 +0100 + + sna/accel: Check for reloc overflow when adding a new glyph run + + Signed-off-by: Chris Wilson + +commit b10850af4125b8dbc36d13fa83f1dcce13ac6684 +Author: Chris Wilson +Date: Thu Oct 13 17:09:25 2011 +0100 + + sna/blt: Check for reloc overflow when initialising solid fills + + Signed-off-by: Chris Wilson + +commit d5242565ef17cb4265177338df5b564b960e3692 +Author: Chris Wilson +Date: Wed Oct 12 21:14:43 2011 +0100 + + sna/gen2: Trim some surplus state commands + + Signed-off-by: Chris Wilson + +commit 7c5020532335c07d9b0f6cecb0b004de4af6d273 +Author: Chris Wilson +Date: Wed Oct 12 20:36:53 2011 +0100 + + Remove vestigial includes from DRI1 + + Signed-off-by: Chris Wilson + +commit b6b3bb9b5e56949cbd9189d9857ffa1ff46377fd +Author: Chris Wilson +Date: Tue Sep 20 19:41:03 2011 +0100 + + sna: compare against the right array of cache buckets + + Fortunately harmless today as there are the same number of + inactive/active buckets. + + Signed-off-by: Chris Wilson + +commit 1f70095837a30d6a88b9e313d3583d38ea55221d +Author: Chris Wilson +Date: Tue Oct 11 16:06:31 2011 +0100 + + sna: And free the clip after creation for PolySegments + + Signed-off-by: Chris Wilson + +commit 92f4d978c8b1f5e9a6cf3affa15d90bfb3d4e7b9 +Author: Chris Wilson +Date: Tue Oct 11 15:52:13 2011 +0100 + + sna: More micro-optimisation of messing around with clip regions + + Signed-off-by: Chris Wilson + +commit 57151f654752ed64716358ecb5e9217b59784da8 +Author: Chris Wilson +Date: Tue Oct 11 15:23:17 2011 +0100 + + sna: Micro-optimise checking for singular clip boxes + + Signed-off-by: Chris Wilson + +commit 823a4272c50247482428a16cb08741bf87a302ea +Author: Chris Wilson +Date: Tue Oct 11 13:51:41 2011 +0100 + + sna/gen3: Avoid RENDER/BLT context switch for fill boxes + + Signed-off-by: Chris Wilson + +commit 887361de173e082841453902089427447c5a158a +Author: Chris Wilson +Date: Tue Oct 11 13:51:25 2011 +0100 + + sna: Enable single fill fast path for PolySegment + + Signed-off-by: Chris Wilson + +commit 721cf30e9eeb0102c77f337332ad8259463b7fef +Author: Chris Wilson +Date: Tue Oct 11 13:28:45 2011 +0100 + + sna/accel: If the data is already on the GPU, use it for the source + + Fixes regression from 1ec6a0e2775 (sna: Move the source to the GPU + if it is reused). + + Signed-off-by: Chris Wilson + +commit 15a4410cec111c3b3bd15ec33f29bc1f4cb709c1 +Author: Chris Wilson +Date: Tue Oct 11 13:28:30 2011 +0100 + + sna: use correct insertion point for sorting partials + + Signed-off-by: Chris Wilson + +commit a9b53c48774078d404149e86267c39eb82234c3a +Author: Chris Wilson +Date: Tue Oct 11 10:37:25 2011 +0100 + + sna: Mark the spans render functions as fastcall + + This reduces the amount of dancing required to call into the span + functions as we can pass the arguments in both the integer and floating + point registers. + + Signed-off-by: Chris Wilson + +commit 208fa8e6b88daf8446239a1a001a68ceb7d02e76 +Author: Chris Wilson +Date: Tue Oct 11 10:08:42 2011 +0100 + + sna/trapezoid: Perform the NULL check for damage in the caller + + Save the function call overhead in the common case. + + Signed-off-by: Chris Wilson + +commit 5050fead0ef81785a2a9be735852921463377e04 +Author: Chris Wilson +Date: Tue Oct 11 09:59:13 2011 +0100 + + sna/gen3: avoid applying zero offset to common spans + + Signed-off-by: Chris Wilson + +commit d0184b59095d5b8fab1a65ceba075d29189130d4 +Author: Daniel Vetter +Date: Sun Oct 9 18:43:14 2011 +0200 + + snb: implement PIPE_CONTROL workaround + + Sandybdrige requires an elaborate dance to flush caches without + hanging the gpu. See public docs Vol2Part1 1.7.4.1 PIPE_CONTROL + or the corrensponding code in mesa/kernel. + + This (together with the corresponding patch for the kernel) seems to + fix the hangs in cairo-perf-traces I'm seeing on my snb machine. + + v2: Incorporate review from Chris Wilson. For paranoia keep all three + PIPE_CONTROL cmds in the same batchbuffer to avoid upsetting the gpu. + + Signed-off-by: Daniel Vetter + +commit 4a2e833ab17e4facf0f90166b82a5696a1deef91 +Author: Chris Wilson +Date: Tue Oct 11 08:45:47 2011 +0100 + + sna/gen7: Add render support for fill one + + To prevent the RENDER to BLT transition and potential stall. + + Signed-off-by: Chris Wilson + +commit 41f525fab5a82c24adafc7e8c8409417d16a0e9a +Author: Chris Wilson +Date: Tue Oct 11 00:22:11 2011 +0100 + + sna/gen6: Add render support for fill-one-box + + Signed-off-by: Chris Wilson + +commit 5b6575bdded4b24ec1c9515203f44798225c10b6 +Author: Chris Wilson +Date: Mon Oct 10 16:39:02 2011 +0100 + + sna: Support a fast composite hook for solitary boxes + + Signed-off-by: Chris Wilson + +commit c5414ec992d935e10156a2b513d5ec2dded2f689 +Author: Chris Wilson +Date: Sun Oct 2 12:02:41 2011 +0100 + + sna: Use BLT operations to avoid fallbacks in core glyph rendering + + Signed-off-by: Chris Wilson + +commit 6b62b9d7c4301457a024f840383fb4515704ebdb +Author: Chris Wilson +Date: Tue Oct 4 19:30:06 2011 +0100 + + sna: Increase reserved space in batch to accommodate gen5 workaround + + Signed-off-by: Chris Wilson + +commit 6351d8eb823dbfffb4792af8592d1ce565211e23 +Author: Chris Wilson +Date: Tue Oct 4 19:29:46 2011 +0100 + + sna/gen[23]: Fix compilation with debugging enabled + + Signed-off-by: Chris Wilson + +commit 1ec6a0e27753027a68beeaff0276ae65c658d468 +Author: Chris Wilson +Date: Mon Oct 3 16:14:18 2011 +0100 + + sna: Move the source to the GPU if it is reused + + We attempt to skip upload a source pixmap to the GPU in the event it is + used only once (for example during image upload by firefox). However, if + we continue to use the CPU source pixmap then it obviously was worth + uploading to the GPU. So if we use the CPU pixmap a second time, do the + upload and then blit. + + Signed-off-by: Chris Wilson + +commit 413c9f7111c605a3842d4d0a85f8cf01470e5faa +Author: Chris Wilson +Date: Mon Oct 3 00:24:50 2011 +0100 + + sna/blt: Suppress repeated SETUP_BLT + + Signed-off-by: Chris Wilson + +commit 1067335305a6b8123217518085f70a77b7f0334f +Author: Chris Wilson +Date: Mon Oct 3 00:11:55 2011 +0100 + + sna/blt: SETUP_BLT needs 9 dwords of batch space, not 3! + + Signed-off-by: Chris Wilson + +commit d8c96a6a1d50cd3dd40fd4b78958c8f78337a2fb +Author: Chris Wilson +Date: Sun Oct 2 12:57:53 2011 +0100 + + sna/blt: Use SETUP_MONO to reduce the number of fill relocations + + Signed-off-by: Chris Wilson + +commit 4d227d43f0dfca1fa1822207d68539635aac37b3 +Author: Chris Wilson +Date: Sun Oct 2 12:03:21 2011 +0100 + + sna/accel: Correct syntax for constifying BoxPtr + + Signed-off-by: Chris Wilson + +commit 3dd80524160d6b6cf0fb668afcc766f2bc6f8383 +Author: Chris Wilson +Date: Sun Oct 2 09:59:03 2011 +0100 + + sna/accel: Only throttle after flushing + + Signed-off-by: Chris Wilson + +commit 04b8f0a5a16ff71c5e55e0281dbcaa32554703ec +Author: Chris Wilson +Date: Sun Oct 2 09:36:38 2011 +0100 + + sna/accel: Add a compile option to force flushing on every blockhandler + + Signed-off-by: Chris Wilson + +commit 32cef71efe231692f7b24f66913a8ae57bc00aa8 +Author: Chris Wilson +Date: Sun Oct 2 08:55:55 2011 +0100 + + sna/accel: Add an compile option to disable use of spans + + Using spans has a tremendous effect (~100x) on x11perf, some good but + mostly bad. However, in reality operations are mixed and so preventing + migration on alternate opertaions is a win. In the x11perf slowdowns, it + appears to be CPU bound and so it seems like there should be plenty of + scope for recovering the lost performance. + + However, for the time being, just go back to the old fallbacks. + + Signed-off-by: Chris Wilson + +commit dc1ec0dd1a5f66114ee4249309d3a283ad84d584 +Author: Chris Wilson +Date: Sat Oct 1 20:11:47 2011 +0100 + + sna/accel: Only disable the flush migitration if nothing changed + + Previously we ignored updating the scanout in place, and so we were not + amoritizing the shadow cost of common core rendering operations. + + Signed-off-by: Chris Wilson + +commit c6acf1325833b8679ef09ab74f0cb0fd82a8cd92 +Author: Chris Wilson +Date: Sat Oct 1 11:26:54 2011 +0100 + + sna/accel: Micro-optimise sna_fill_spans_blt + + Signed-off-by: Chris Wilson + +commit 8029765515399b130bee18db0a2830eb83f47a07 +Author: Chris Wilson +Date: Sat Oct 1 11:19:49 2011 +0100 + + sna/accel: Don't attempt converting to spans if we will only fallback + + As the span code does not yet handle plane masks or stippling, it is + disadvantageous to convert to spans only to fallback. + + Signed-off-by: Chris Wilson + +commit cd11bd69f4c1b961593886945946c7d7c9269900 +Author: Chris Wilson +Date: Sat Oct 1 10:45:18 2011 +0100 + + sna/accel: Use miPolyArc to convert arcs into spans for gpu bo + + This is actually tricker than it looks since miPolyArc() sometimes uses + an intermediate bitmap which performs worse than the fbPolyArc() fallback. + + Signed-off-by: Chris Wilson + +commit d07256cc3360cf94d131d9a1b24d9f1c6a70ee04 +Author: Chris Wilson +Date: Sat Oct 1 10:42:45 2011 +0100 + + sna/accel: Convert segments into spans similarly to PolyLine + + Signed-off-by: Chris Wilson + +commit d09a229e32468c810f5056bfd0043f2fb68038d3 +Author: Chris Wilson +Date: Sat Oct 1 10:01:21 2011 +0100 + + sna/accel: Use the mi*Line routines to convert the line into spans for gpu bo + + Signed-off-by: Chris Wilson + +commit e7a662b92e3012735f7a3d72d4f7860ca61a3810 +Author: Chris Wilson +Date: Sat Oct 1 09:26:52 2011 +0100 + + sna: Sort partials by remaining space + + Signed-off-by: Chris Wilson + +commit 13b9b5d8d6b6f6db59fe2418270ac93d9b74436c +Author: Chris Wilson +Date: Sat Oct 1 09:23:41 2011 +0100 + + sna/io: Only mark the buffer as LAST if we know we will flush the IO + + Otherwise we can continue to batch up the data upload into larger + buffers. + + Signed-off-by: Chris Wilson + +commit 7ecc6993b8c8205e5896ee87c14d6a76310c9aa7 +Author: Chris Wilson +Date: Fri Sep 30 16:11:05 2011 +0100 + + sna/gen6: Fix offset of Scan-Line-Compare register + + Reported-by: Frank Mariak + Signed-off-by: Chris Wilson + +commit d8fe941bc245e24c83c417ccff5c57e83baac3f7 +Author: Chris Wilson +Date: Wed Sep 28 23:04:03 2011 +0100 + + sna: Check for request retires after every batch + + In the beginning, I did perform a retire after ever batch. Then I + decided that it was too much CPU overhead for too little gain. On + reflection, i.e. further benchmarking, we do see a performance + improvement for recycling active buffers faster. + + Signed-off-by: Chris Wilson + +commit e74a39b45446e2c43df5419efc4a2e0e73275c45 +Author: Chris Wilson +Date: Wed Sep 28 14:47:33 2011 +0100 + + sna/gen7: Confusion reigns as trying to fix errors found by an outdated checker + + Signed-off-by: Chris Wilson + +commit 6395894ada6b9c14deb62814ccf55848eaa80527 +Author: Chris Wilson +Date: Tue Sep 27 23:26:33 2011 +0100 + + sna/gen7: Fix up a couple instances of my inability to count + + Signed-off-by: Chris Wilson + +commit a53538659d5e18cb5a7a7a7dbd460f35985183fd +Author: Chris Wilson +Date: Sun Sep 25 12:40:01 2011 +0100 + + sna/accel: Fix s/x/y/ typo in computing relative drawing coordinates + + Reported-by:Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41165 + Signed-off-by: Chris Wilson + +commit 960688d1684dd062c345aa8df1ff4f105015f467 +Author: Chris Wilson +Date: Sun Sep 25 12:23:10 2011 +0100 + + sna/accel: Debug option to force CPU fallbacks + + Signed-off-by: Chris Wilson + +commit 4fd46b8bb7e7a104a0afa0e5dee92993e043ef57 +Author: Chris Wilson +Date: Sun Sep 25 10:02:02 2011 +0100 + + sna/glyphs: Add glyphs directly onto a client temporary buffer + + Signed-off-by: Chris Wilson + +commit 5154e281ed66334a8ff6342236c1203a1e4ac5a3 +Author: Chris Wilson +Date: Sun Sep 25 09:56:16 2011 +0100 + + sna/glyph: Avoid useless attempt at GPU glyph rendering to a1 destinations + + The actual bug is a little involved as we don't damage the temporary + glyph mask correctly presuming that we only hit GPU paths. However, + should we fail to prepare the composite operation that paints the mask + on to the destination, things fail horribly. + + One particular example is that wine like to create its own temporary a1 + buffer for the glyphs (which we render to via another temporary mask...) + which triggers the delayed fallback and then sw compositing with a random + buffer. + + Reported-by: Roman Jarosz + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41165 + Signed-off-by: Chris Wilson + +commit 46fedf0cf1a413381109c1de34619e84ad614b8a +Author: Chris Wilson +Date: Sun Sep 25 09:38:43 2011 +0100 + + sna/kgem: Check all operation bo in a single amalgamation + + Signed-off-by: Chris Wilson + +commit ccf6547a8f1b77ddf4e79bdefe2a0878c0e9b256 +Author: Chris Wilson +Date: Sat Sep 24 23:16:57 2011 +0100 + + sna: Paranoid debug flush after every op (as well as before) + + Signed-off-by: Chris Wilson + +commit 02337600345951c0ea629db11f0484403a260991 +Author: Chris Wilson +Date: Sat Sep 24 23:03:52 2011 +0100 + + sna/gen5: Debug option to disable state caching + + Signed-off-by: Chris Wilson + +commit af4d3853ae8f834fbf2fc55fb2b397b3f7f17656 +Author: Chris Wilson +Date: Sat Sep 24 19:26:46 2011 +0100 + + sna/glyphs: Convert all sub-8bpp masks to a8 + + Signed-off-by: Chris Wilson + +commit c79e90da71ae58cb3804f8abaf0541350e47eb14 +Author: Chris Wilson +Date: Sat Sep 24 19:26:31 2011 +0100 + + sna: Add a debug option to disable caching + + Signed-off-by: Chris Wilson + +commit 6bbb88af096e054877409a54d0e0a4ccf5ee317e +Author: Kenneth Graunke +Date: Sat Sep 24 09:27:33 2011 +0100 + + Fix incorrect maximum PS thread count on IvyBridge + + I mistakenly set GEN7_PS_MAX_THREAD_SHIFT to 23; it's actually 24 on + Ivybridge. Not only did this halve our thread count, it caused us to + write 1 into a bit 23, which is marked as MBZ (must be zero). + Furthermore, it made us write an even number into this field, which is + apparently not allowed. Apparently we were just lucky it worked. + + Signed-off-by: Kenneth Graunke + Signed-off-by: Chris Wilson + +commit 7f7f95abbf57e6e71f6a30d917f97c2f2bd6cea9 +Author: Chris Wilson +Date: Fri Sep 23 11:38:18 2011 +0100 + + sna/accel: Use the PolyFillRect to handle tiled spans + + Would be preferrable to duplicate the tiling logic. Leave the task of + reimplementing XAA to another day! + + Signed-off-by: Chris Wilson + +commit 964c96b181e6b55f4de6a4011a5beb6cc2cac33d +Author: Chris Wilson +Date: Fri Sep 23 11:37:48 2011 +0100 + + sna/accel: Always subtract the enlarged region from the outstanding GPU damage + + Signed-off-by: Chris Wilson + +commit c68856f34653ac3e7af900dfbba41a108ffe119e +Author: Chris Wilson +Date: Fri Sep 23 11:35:50 2011 +0100 + + sna/accel: Only skip undamaging the GPU for reads + + Introduced with ac1b83240e5 (sna/accel: Simplify single pixel read-back) + + Signed-off-by: Chris Wilson + +commit 5913c90967091124e7c7b262782f0e99cf400eab +Author: Chris Wilson +Date: Thu Sep 22 17:13:20 2011 +0100 + + sna/accel: fix assert to include the offset of copy + + Signed-off-by: Chris Wilson + +commit 31857068026138fe5edd8656381fc1ae59d3058b +Author: Chris Wilson +Date: Thu Sep 22 17:12:53 2011 +0100 + + sna: move an assert + + Signed-off-by: Chris Wilson + +commit 61764af13aa3c770d19d51c8ad198cab8a5866f1 +Author: Chris Wilson +Date: Thu Sep 22 12:59:32 2011 +0100 + + sna/dri: Bump DRI2INFOREC_VERSION + + An intervening dri2 patch landed in the sever. + + Signed-off-by: Chris Wilson + +commit 12070b8eb1e98cb158802fff3e59f906b1547877 +Author: Chris Wilson +Date: Thu Sep 22 12:18:26 2011 +0100 + + sna/dri: Play with marking bo reusable + + Since we have no recycling of wc pages in the kernel, we try hard to + recycle buffers in userspace to avoid GTT thrashing. This requires + co-operation between DRI clients and X, which is sadly lacking and so we + need to discard any buffer given out to a client after it is finished. + We cheat slightly for page-flips and access to the scanout. + + A further compromise. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=38732 + Signed-off-by: Chris Wilson + +commit 902a0234191d77816259affe331339caaa9131d6 +Author: Chris Wilson +Date: Mon Sep 19 20:34:15 2011 +0100 + + sna: Use pot buckets for active cache + + On x11perf one of the major hotspots is the search through the active + list for an object large enough to reuse as the target surface. We can + eliminate that overhead by keeping those active objects in pre-sorted + lists by size. + + Signed-off-by: Chris Wilson + +commit 7bb2c5c4d55560f7901fd8036cab164460f81edc +Author: Chris Wilson +Date: Mon Sep 19 19:12:46 2011 +0100 + + sna: Move an assertion to the point of import + + All the guesswork is so that when we require an inactive bo, we do + actually get a buffer that is not currently on a GPU active list. For + some unresolved reason, this assertion was firing when putting the + buffer onto the inactive list - so just workaround the worrisome issue + by delaying the check until use. + + Signed-off-by: Chris Wilson + +commit 686a5ec52c9ae475fac22c36fff18814372def71 +Author: Chris Wilson +Date: Mon Sep 19 18:14:05 2011 +0100 + + sna/trapezoids: Fix overflow during sorting of mono edge step + + We were tracking the 32bit value of the prev_x using only a 16bit + variable, and so failing to sort the edges after advancing to the next + scanline. + + Fixes cairo a1-clip-fill-rule. + + Signed-off-by: Chris Wilson + +commit 0390105bc239bf2ac22189f39fccc9d98bae4992 +Author: Chris Wilson +Date: Mon Sep 19 12:48:38 2011 +0100 + + sna: compile fixes for debugging + + Update the DBG messages to reflect changes in function parameters. + + Signed-off-by: Chris Wilson + +commit 7f0cba3a255eb9e76d56201b26d15f2d49134b58 +Author: Paulo Zanoni +Date: Fri Sep 16 18:56:00 2011 -0300 + + Remove useless assertion + + Removes 17 instances of: + warning: comparison of unsigned expression >= 0 is always true + + Signed-off-by: Paulo Zanoni + Signed-off-by: Chris Wilson + +commit 2d9effca142b1d82cd1a7ad3b7d2a61c4567801b +Author: Paulo Zanoni +Date: Fri Sep 16 18:53:01 2011 -0300 + + Fix "always false" conditionals + + Enums are unsigned by default in gcc and we can't rely on any specific + signedess for the other compilers. + + i965_render.c: In function ‘i965_prepare_composite’: + i965_render.c:2018:2: warning: comparison of unsigned expression < 0 is always false + i965_render.c:2025:2: warning: comparison of unsigned expression < 0 is always false + i965_render.c:2050:3: warning: comparison of unsigned expression < 0 is always false + i965_render.c:2057:3: warning: comparison of unsigned expression < 0 is always false + + Signed-off-by: Paulo Zanoni + [ickle: take advantage and rename the enum values] + Signed-off-by: Chris Wilson + +commit 7bcd1d2b75d280cecfc23877bb13426a28c07a1f +Author: Chris Wilson +Date: Sat Sep 17 21:38:46 2011 +0100 + + sna: perform a warnings reduction pass + + Didn't spot anything that might have led to a genuine bug, but this + should help improve the signal-to-noise ratio of warnings in the future. + + Signed-off-by: Chris Wilson + +commit a5b5b4ebb14cab19258dd1cbc12721aaa9df226d +Author: Chris Wilson +Date: Sat Sep 17 00:28:30 2011 +0100 + + sna: Apply the screen offset for direct upload of a composited pixmap + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38733 + Signed-off-by: Chris Wilson + +commit daeb9291e22d94cd2f81b3b56418f0f879531da5 +Author: Chris Wilson +Date: Sat Sep 17 00:27:55 2011 +0100 + + sna/trapezoids: Ensure we do not overrun the vertical edges for mono + + Signed-off-by: Chris Wilson + +commit 481df2618af3c10877db0610c4cadf6fc509e72f +Author: Chris Wilson +Date: Sat Sep 17 00:27:32 2011 +0100 + + sna: Add debug option to force allocaiton of gpu-only pixmaps + + Signed-off-by: Chris Wilson + +commit 52f93c95465151d16f588d648a58b1f979e946a3 +Author: Chris Wilson +Date: Fri Sep 16 23:24:16 2011 +0100 + + sna/glyphs: Disable the glyph cache for debugging + + Signed-off-by: Chris Wilson + +commit c8a144d6f84a00a26785fd518cb890ad77edd45f +Author: Chris Wilson +Date: Fri Sep 16 22:56:36 2011 +0100 + + sna/glyphs: Correct offset of fallback-via-mask glyphs + + Under a compositing manager where we have fun values for both + drawable->x/y and pixmap->screen.x/y, we were not drawing either the + glyphs into the mask correctly and then failed to composite the mask in + the right position on top of the pixmap. + + Signed-off-by: Chris Wilson + +commit 1eea2c4e60af535ac6500b1b62367f9f63f2a784 +Author: Chris Wilson +Date: Fri Sep 16 20:35:03 2011 +0100 + + sna: Can't free bo from the active list + + As the active bo is still referenced in the request list, we can not + simply free it but need to wait for it to be purged on expiration. + + Signed-off-by: Chris Wilson + +commit d743c456db11bd3c0d21948dc3a2eb4b33e46342 +Author: Chris Wilson +Date: Fri Sep 16 20:34:33 2011 +0100 + + sna: Debug option to disable tiling + + Signed-off-by: Chris Wilson + +commit 8c35df4493c910ef62c66a411c14e5be3b26bcf0 +Author: Chris Wilson +Date: Fri Sep 16 20:33:57 2011 +0100 + + sna: Remove bad assert + + The caller intentionally violates this assert, so it is useless. + + Signed-off-by: Chris Wilson + +commit 72ca1fdf2fea80ff4cf003bb025424d15d8bac58 +Author: Chris Wilson +Date: Thu Sep 15 17:52:45 2011 +0100 + + configure: Introduce --with-builderstring + + Julien Cristau disliked my broadcasting of the git tree used to build + his distribution package as it bore little relevance to his users. As it + is only useful for people installing their own drivers (as a means of + sanity checking that they are running the right driver), we introduce + the --with-builderstring idiom borrowed from the xserver. This allows + the builder to override the use of `git describe` and either leave it + blank or to fill it with something useful for their own purposes. + + Signed-off-by: Chris Wilson + +commit 544a4167c156eac7b630f90ddef30a6f00829835 +Author: Chris Wilson +Date: Wed Sep 14 18:39:37 2011 +0100 + + sna/trapezoids: Amalgamate adjacent mono spans + + Signed-off-by: Chris Wilson + +commit 3565c48c4bb77c836d817de75d098791dbb529d3 +Author: Chris Wilson +Date: Wed Sep 14 17:45:41 2011 +0100 + + sna: Yet another s/x/y/ typo + + Every time I do a transformation into pixmap space I like to include one + of these copy'n'paste errors. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40850 + Signed-off-by: Chris Wilson + +commit 4d4aca21fd32a367d78dfaf1c23b4faeabe36428 +Author: Chris Wilson +Date: Wed Sep 14 13:06:26 2011 +0100 + + sna: assert that the memcpy upload path points to valid regions + + Signed-off-by: Chris Wilson + +commit 83961051789e418f6022096b1ed2302cb2f05e5b +Author: Chris Wilson +Date: Tue Sep 13 18:37:01 2011 +0100 + + sna/gen3: Reset the shader after playing video + + Another piece of state we zap without marking as dirty when playing + video. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40842 + Signed-off-by: Chris Wilson + +commit 34c03f22158d8fc1ec2fc56cb5e87f74e42d9a8f +Author: Chris Wilson +Date: Tue Sep 13 17:24:14 2011 +0100 + + sna: Clear the list of buffers upon server regen + + Or else we may try to clear the new framebuffer with an invalid batch, + because it will reuse the same bo as last time and that bo may still + think it is part of the old batch. + + Signed-off-by: Chris Wilson + +commit 831cdb837189e92aee80030dec553f28e53ba0bc +Author: Chris Wilson +Date: Tue Sep 13 17:09:38 2011 +0100 + + sna/debug: Assert that BLT commands on gen2/3 are properly fenced + + Signed-off-by: Chris Wilson + +commit a9242a77f0952d029be57d75615dd107af660de1 +Author: Chris Wilson +Date: Tue Sep 13 16:20:40 2011 +0100 + + sna: Add a couple of debug statements for why we may not flush the scanout + + Signed-off-by: Chris Wilson + +commit 0056bfd11e9930c1bcad6c186cd80fbab3694a8d +Author: Chris Wilson +Date: Tue Sep 13 14:44:48 2011 +0100 + + video: Stop advertising unsupported Xv attributes + + We have yet to implement a yuv-shader that applies + contrast/brightness/saturation and so should not advertise such + features, potentially allowing the client to fallback and perform the + adjustments itself. + + Signed-off-by: Chris Wilson + +commit 84a7c11a8134dfd040d2f90bb1e0670aa2c89962 +Author: Chris Wilson +Date: Tue Sep 13 14:42:33 2011 +0100 + + sna/video: Stop advertising unsupported Xv attributes + + Signed-off-by: Chris Wilson + +commit a0d533ea8d098dbbd86af166de9c07ce67050c35 +Author: Chris Wilson +Date: Tue Sep 13 12:23:10 2011 +0100 + + sna/trapezoids: Implement a mono-rasteriser to skip opacity spans + + For mono-rasteriser we can simply emit the composite spans without + requiring an opacity shader. + + For single trapezoids, it will be more interesting to emit triangles + directly. However, we still need to compute the union of many + trapezoids, and this builds upon existing code. + + Signed-off-by: Chris Wilson + +commit 343b99d2a85c520c81d1408534b2531fcbedfaae +Author: Chris Wilson +Date: Tue Sep 13 11:39:39 2011 +0100 + + sna: Reuse the smallest bo that fits the request + + When scanning the active list, pick the smallest that we can reuse. + + Signed-off-by: Chris Wilson + +commit 90071454d24e7230d00c49f5a897296298fc1f22 +Author: Chris Wilson +Date: Tue Sep 13 11:37:17 2011 +0100 + + sna: Don't clear the kernel-needs-flush flag if we emit a MI_FLUSH + + We need to mirror the kernel active lists in order to predict when it + will stall upon an access to a bo, and so we cannot clear the + needs_flush for our own MI_FLUSH. + + Signed-off-by: Chris Wilson + +commit 2deafe2d95d07b574f5a92471f7d7f13aebc790f +Author: Chris Wilson +Date: Tue Sep 13 11:34:43 2011 +0100 + + sna/accel: Use correct enum for requesting a write-buffer + + Signed-off-by: Chris Wilson + +commit 544b1a678d5bf49559d8422750866685c36cb152 +Author: Chris Wilson +Date: Tue Sep 13 11:34:25 2011 +0100 + + sna/gen5: Fix debug compilation + + Signed-off-by: Chris Wilson + +commit 6b1ed58d63e9ac80d7d028fa3036633436154816 +Author: Chris Wilson +Date: Mon Sep 12 19:07:25 2011 +0100 + + sna/gen5: Avoid bitfields for simple assignments + +commit 03a7fc16f9ef00ca5591655337621ec67bc37cba +Author: Chris Wilson +Date: Mon Sep 12 12:20:24 2011 +0100 + + sna: Avoid the call overhead for the trivial clip case + + Profile guided micro-optimisation. /o\ + + Signed-off-by: Chris Wilson + +commit 2540c877d4811b318e1c2cd707745e5b06c9fa4b +Author: Chris Wilson +Date: Mon Sep 12 11:54:46 2011 +0100 + + sna/gen6: Prefer RENDER for copies as it compacts better + + Signed-off-by: Chris Wilson + +commit f2a617dcc5fbeaf503db4777f0ec7b3d862085b9 +Author: Chris Wilson +Date: Mon Sep 12 11:54:02 2011 +0100 + + sna: Use single precision for computing the texcoord scale factor + + Signed-off-by: Chris Wilson + +commit c2e19987c333de31b258a3af37a2ed1f63ef949a +Author: Chris Wilson +Date: Mon Sep 12 10:37:24 2011 +0100 + + sna: Provide a direct lookup cache of alpha values + + To reflect recent changes in cairo. + + Signed-off-by: Chris Wilson + +commit 04c5a3df02f6f40a904ff4edb927ae6ff0ce6408 +Author: Chris Wilson +Date: Mon Sep 12 09:20:58 2011 +0100 + + sna: Fix compilation without timerfd() + + Based on the patch by Konstantin Belousov. + + Reported-by: Konstantin Belousov + Signed-off-by: Chris Wilson + +commit ae887c9d1cb2a06c515e054b36464bcf65440f9f +Author: Chris Wilson +Date: Sun Sep 11 13:59:08 2011 +0100 + + sna/trapezoids: Prevent a memleak if feed lots of degenerate boxes + + Signed-off-by: Chris Wilson + +commit 72fafdfd374eb165e703b791c70592c47e5772fc +Author: Chris Wilson +Date: Fri Sep 9 23:15:58 2011 +0100 + + gitignore: add git_version.h + + Signed-off-by: Chris Wilson + +commit ac4d4cdbc1336c86a16a2ec3da2ef6e9842c1079 +Author: Chris Wilson +Date: Fri Sep 9 23:12:59 2011 +0100 + + sna: Mark the bo as reusable after extracting the handle from the buffer + + The whole purpose for that little dance was so that we could reuse the + bo. However, we left it marked as non-reusable in order for us not to + tie up memory with too many buffers and so defeated the purpose of + trying to place it into the inactive cache. + + Signed-off-by: Chris Wilson + +commit b3429cf12d6e3e8dd89372f8f70c64205d835b0c +Author: Chris Wilson +Date: Fri Sep 9 18:09:55 2011 +0100 + + sna/gen3: Use a clear pattern for ill-defined radial gradients + + Signed-off-by: Chris Wilson + +commit b6837c21b459a99cb51b0d41906d82604e515dc0 +Author: Chris Wilson +Date: Fri Sep 9 14:57:09 2011 +0100 + + sna/gen5: Prefer BLT for solids + + And Ironlake also fails to live up to the promise that its GPU is fast + enough to run simple programs at memory rates. + + x11perf -trap300 5x fold improvement. No obvious improvement elsewhere + yet. + + Signed-off-by: Chris Wilson + +commit 27e42b4e1216099f4a6aa7fddeb1e83b87124b6e +Author: Chris Wilson +Date: Fri Sep 9 14:06:53 2011 +0100 + + sna: Prefer memcpy_blt over fbBlt + + We know we have compatible formats since we have a gpu_bo attached to + the pixmap, so we can use the simpler direct memcpy rather than calling + fbPutZImage/fbBlt. + + On my i3-330m, this improves putimage500 from 730 to 1100 ops/s. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 2e1bf7e1b44db16d0c322f17535fc6a6fa07353b +Author: Chris Wilson +Date: Fri Sep 9 12:36:32 2011 +0100 + + sna: Record git-tree used for compilation + + Hopefully, I have all the dependencies correct for auto-updating and + should continue to work with tarballs... + + The next step is to perhaps include it in the usual version number, + perhaps as patch level? + + Signed-off-by: Chris Wilson + +commit f73cd955e760064f57f414dce5f39e43022e4ea6 +Author: Chris Wilson +Date: Fri Sep 9 11:37:32 2011 +0100 + + sna/trapezoids: Hook up Imprecise AddTraps in lieu of spans + + Signed-off-by: Chris Wilson + +commit adde6eab5d0e532633c864830f8edfa63b36ef4e +Author: Chris Wilson +Date: Thu Sep 8 23:35:33 2011 +0100 + + sna/trapezoids: Fast upload path for gpu busy bo + + Signed-off-by: Chris Wilson + +commit e9ca05331db9849fba39fbd0583db7052fc80a31 +Author: Chris Wilson +Date: Thu Sep 8 22:54:22 2011 +0100 + + sna/traps: Use the trapezoid path for AddTraps + + Usually this will be to CPU-only pixmap, but just on the off-chance that + we are stalling for a GPU pixmap just the faster path developed for + Trapezoids. + + Signed-off-by: Chris Wilson + +commit afdb8aa89a88c62ccd5e26a3ed9adb70fec310a8 +Author: Chris Wilson +Date: Wed Sep 7 20:10:02 2011 +0100 + + sna/gen3: Do not assume video updates are always vsync'ed + + In case the video is running async, then there may be subsequent + instructions within the batch and so we do need to mark the clobbered + state as dirty when setting up the video frame. + + Reported-by: Paul Neumann + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40693 + Signed-off-by: Chris Wilson + +commit 6aee152cb8444bf63c0009a75c6537e9886b6070 +Author: Chris Wilson +Date: Sun Sep 4 12:57:17 2011 +0100 + + sna/gen2: Flush the batch when we run out of vertex space + + Unlike the later gen, we do not yet use a separate vertex buffer and so + when can no longer fit a rectangle (and its CA ghost) we must flush the + batch. Due to the duplication required for the CA pass, the normal + checks to see whether we had sufficient space to add the new command + were passing as they failed to take into account the need to submit the + whole primitive again. + + Signed-off-by: Chris Wilson + +commit 48bfe4e6ded746f32080b83079235a7576f50d7a +Author: Chris Wilson +Date: Sun Sep 4 12:46:32 2011 +0100 + + sna/gen2: Improve batch decoder. + + Signed-off-by: Chris Wilson + +commit 2cda0aaf397de1a0ca049508c6fa76f2dd4e61e8 +Author: Chris Wilson +Date: Sat Sep 3 14:46:57 2011 +0100 + + sna/trapezoids: Check for alignment after projection + + If after projection onto the Imprecise fast sample grid, the trapezoid + becomes a pixel-aligned box, treat it as such and send it down the fast + paths. + + Signed-off-by: Chris Wilson + +commit db0fb368c135d4fef4ae993df67ed4610a80fd52 +Author: Chris Wilson +Date: Fri Sep 2 13:13:38 2011 +0100 + + sna: Add missing implementation for Triangles + + Feed both into spans and as a mask fallback. + + Signed-off-by: Chris Wilson + +commit 695e7115efab96c4467dc926be07dc2609011720 +Author: Chris Wilson +Date: Thu Sep 1 15:50:29 2011 +0100 + + sna/trapezoids: Edges may lie out of bounds + + We cannot assume that the edge lies completely within the target, so we + must make sure that the initial prev_x is truly less than any possible + value whilst sorting intersections. + + Signed-off-by: Chris Wilson + +commit 9a563ea03b6ad87d41bc091c5819e6c462100450 +Author: Chris Wilson +Date: Wed Aug 31 23:29:00 2011 +0100 + + sna: Use the shadow buffer for PutImage + + This is optimising for the x11perf putimage benchmark, but nevertheless, + uploading the PutImage directly into the uncached scanout is between + 2-20x slower than making a temporary copy in the shaodw buffer and + doing a deferred update. Most of the overhead is in the kernel, and + should be addressed there (rather than worked around) and a portion is + due to the overdraw in the benchmark (which is not likely to be + realistic, but then again neither should PutImage be!). + + The argument for uploading inplace when possible is that given that the + buffer already exists on the GPU implies that is likely to be used again + in future by the GPU and so we will be uploading it at some point. + Deferring that upload incurs an extra copy. The putimage benchmark does + not actually use the pixel data and so that extra cost is not being + measured. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 32fc0c896e0dfd06617c12beda1ccacedf69fb4a +Author: Chris Wilson +Date: Wed Aug 31 23:21:54 2011 +0100 + + sna/gen6: Prefer the BLT ring, except for copies on behalf of DRI + + As demonstrated by the all-important trap300, using the BLT is 2x faster + than the RENDER ring for the simple case of solid fills. (Though note + that performing the relocations costs 3x as much CPU for 2x GPU + performance.) One case that may regress from this change is copywinpix + which should benefit from the batching in the RENDER commands, and might + warrant revisiting in the future (with realistic and synthetic + benchmarks in hand!) + + However, due to the forced stall when switching rings, we still want to + perform RENDER copies on behalf of DRI clients and before page-flips. + + Checking against cairo-perf-trace indicated no major impact -- I had + worried that setting the BLT flag for some clears might have had a + knock-on effect causing too many operations that could be pipelined on + the RENDER ring to be sent to the BLT ring instead. + + Reported-by: Michael Larabel + Signed-off-by: Chris Wilson + +commit 5586dd729b153e37f942a285d328a07f3fe7ae16 +Author: Chris Wilson +Date: Wed Aug 31 09:25:48 2011 +0100 + + sna/trapezoids: Refactor to project the trapezoid only once + + And doing so means that we can go back to using the common validity + check. + + Signed-off-by: Chris Wilson + +commit 3507437cdba62c28772822cce8c4b656448546db +Author: Chris Wilson +Date: Tue Aug 30 22:13:24 2011 +0100 + + sna/trapezoids: Reject invalid traps after projecting onto the sample grid + + If either of the edges are degenerate on the sample grid, then the trap + has zero height and must be skipped. (Otherwise if just one edge becomes + degenerate than the polygon becomes unbalanced and the rasteriser will + implode.) + + Signed-off-by: Chris Wilson + +commit 150a0612d545b7fd77bf393efdef1cc92ed91e61 +Author: Chris Wilson +Date: Tue Aug 30 19:45:22 2011 +0100 + + sna/trapezoids: Allocate sufficient space for a8 mask for mono traps + + Oops, a silly cut'n'paste from caused us to allocate an A1 pixmap for + mono traps instead of the A8 pixmap that we tried to write to; mayhem + ensued. + + Reported-by: Eugeni Dodonov + Signed-off-by: Chris Wilson + +commit aafe03d3d1cfd5cbdf345cd51436de268ac27b6f +Author: Chris Wilson +Date: Mon Aug 29 16:47:48 2011 +0100 + + sna: Retain the GTT space used for an upload buffer + + In order to retain the GTT space without keeping hold of the memory used + for the upload buffer, we have to create a new bo and copy the relevant + details across. + + Signed-off-by: Chris Wilson + +commit 28c8c5ca14c5b4eab7e2dc58c87050c1019037bb +Author: Chris Wilson +Date: Mon Aug 29 16:27:35 2011 +0100 + + sna: Free the buffers immediately upon release + + They do not appear to have been leaked per-se, but we end up + accumulating the unused buffers. A more complicated solution would be to + reallocate the handle for retained buffers so that the GTT region can be + reused. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39184 + Signed-off-by: Chris Wilson + +commit 4f2fc00944272243af343a8b99f6eb8e0dfda006 +Author: Chris Wilson +Date: Mon Aug 29 15:14:41 2011 +0100 + + sna: Cleanup up the cache upon close + + To help with leak-chasing under valgrind. + + Signed-off-by: Chris Wilson + +commit 0ac4b974b90a5614d1114d5e211cb4b986a89454 +Author: Chris Wilson +Date: Mon Aug 29 10:46:46 2011 +0100 + + sna/video: Defend against PutImage to a broken screen + + Similar to the previous commit, check that the Screen Pixmap is bound to + a bo before proceeding. + + [Note that in this case, the absence of the bo would have been picked + up much later after doing all of the setup...] + + Signed-off-by: Chris Wilson + +commit 0a74cd77a3f462d5d2707bf1f35663279bcb9be5 +Author: Chris Wilson +Date: Mon Aug 29 10:41:26 2011 +0100 + + video: check that the pixmap exists before use + + Now, the pixmap being used is meant to the Screen pixmap and by rights + that has to exists in a GPU buffer! Evidence contrary to the above + exists and so we had better check that we have a bo before using... + + Reported-by: Toralf Förster + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40439 + Signed-off-by: Chris Wilson + +commit 8216c92d5c49d4b8de5c16b615bca0acece49a70 +Author: Chris Wilson +Date: Sun Aug 28 22:32:09 2011 +0100 + + sna/trapezoids: Use the tor scan converter to compute the low precision mask + + Take of the advantage of the faster mask computation available using the + imprecise tor scan converter for chipsets non yet supporting spans. + In doing so, limit the ability to full step only for vertical only rows + as the small sample grid reduces the benefits of the computationally + more expensive full-step. + + Signed-off-by: Chris Wilson + +commit aeee6db798e9ded746b399bc08716cff0bd16ef8 +Author: Chris Wilson +Date: Sat Aug 27 11:43:48 2011 +0100 + + sna/trapezoids: Reduce imprecise sampling to 4x4 + + Note this also revealed a subtle bug in the handling of degenerate + trapezoids after shrinking to the raster grid. + + Signed-off-by: Chris Wilson + +commit ac1b83240e5d4dc5d5bacad3ed49446143cc5589 +Author: Chris Wilson +Date: Sat Aug 27 11:42:19 2011 +0100 + + sna/accel: Simplify single pixel read-back + + The single pixel case is usually assocated with synchronisation of perf + clients and so we do not want to incur extra complication along that + path. Also the cost of tracking a single pixel of non-damage outweighs + its benefit. + + Signed-off-by: Chris Wilson + +commit 786a770f528a0daee2971494352672cb89f48384 +Author: Chris Wilson +Date: Thu Aug 25 19:52:13 2011 +0100 + + sna/video: Flush the video state at the end of the operation + + Or in the case where a second command is received prior to the batch + being flushed, the vertex data is not flushed and leads to the a + miscompution of the number of vertices emitted. + + Reported-by: Elias Probst + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40332 + Signed-off-by: Chris Wilson + +commit bd98001a49be061f0f2cb008b515f5505c8a63a4 +Author: Chris Wilson +Date: Thu Aug 25 14:49:30 2011 +0100 + + sna: Clear structures across server reset + + Signed-off-by: Chris Wilson + +commit 0865acb3ad03239ffdf8cbf3c9fc204b6c97121b +Author: Chris Wilson +Date: Thu Aug 25 12:47:27 2011 +0100 + + sna/dri2: Add some debug around the use of the Resource database + + Signed-off-by: Chris Wilson + +commit 98b67457caea583de50bff1b11a3c5a2bd694e26 +Author: Chris Wilson +Date: Thu Aug 25 12:45:43 2011 +0100 + + sna/display: Destroy shadow data + + Under certain circumstances the shadow can be destroy after being + allocated but before being created. The pixmap is a NULL pointer at that + time, but we know that its value should be data, so just use the data + pointer instead. + + Signed-off-by: Chris Wilson + +commit b9ae4e7e71527f1cf2b6dd6890420da22a22fad9 +Author: Chris Wilson +Date: Wed Aug 24 21:38:28 2011 +0100 + + sna/gen3: reset blend state after applying CA pass + + Otherwise we use the stale value when rendering CA glyphs directly to + the front-buffer and subsequent rendering have a tendency to become + invisible. (Rendering via a temporary glyph mask has a fortunate + side-effect of reseting sufficient state to force the re-emission of the + blend state.) + + Signed-off-by: Chris Wilson + +commit ef52f6c8c3421a31552d5965c40b4d9cf68f6a5c +Author: Chris Wilson +Date: Wed Aug 24 11:04:28 2011 +0100 + + sna/render: allow CLAMP_TO_EDGE for outside samples of extract regions as well + + When clipping the sample region to the edge of the texture we can also + allow the GPU to use CLAMP_TO_EDGE (as well as CLAMP_TO_BORDER) to + emulate the RepeatPad mode of the parent texture. (Only the + RepeatNormal, RepeatReflect need special treatment with regard to tiling + that is not yet handled.) + + This fixes the recent performance regression due to a slight change in + the fish benchmark that caused it to sample outside of the texture atlas + for one of its little fish. + + Signed-off-by: Chris Wilson + +commit d330f3751e484d28293fc593a20375a31b068bc7 +Author: Stefan Dirsch +Date: Fri Jul 22 12:21:01 2011 +0200 + + Fix array size calculation for intel_pci_probe(). + +commit ccddff087df0c567c28416941b175be81190a1d3 +Author: Chris Wilson +Date: Mon Aug 8 00:42:21 2011 +0100 + + sna/trapezoids: Speedup tor rasteriser + + Faster sorts for the win. + + Signed-off-by: Chris Wilson + +commit bfbe36cfea76337689dd8a101ec03469f6d3553d +Author: Chris Wilson +Date: Thu Aug 11 01:08:49 2011 +0100 + + sna/gradient: Use a high-precision ramp for a color step rather than fallback + + Slightly less precise, but the difference should not be observable in + practice... + + Signed-off-by: Chris Wilson + +commit 0e61e235bf7a926fd4e5b1f5a05b72dce4c450f3 +Author: Chris Wilson +Date: Wed Jul 13 22:55:31 2011 +0100 + + sna/damage: Take advantage of marking all-damaged + + Return early from adding new damage regions if we know that we have + already marked it as all-damaged. + + Signed-off-by: Chris Wilson + +commit 3a81bb6bafdbd37802dab96b8f05173ec6701d7f +Author: Chris Wilson +Date: Tue Aug 9 09:42:40 2011 +0100 + + NEWS: 2.16.0 release + + Signed-off-by: Chris Wilson + +commit f4bbbd1dfe59031f864c7d2bbf7bb0252a3aa6a7 +Author: Edward Sheldrake +Date: Mon Aug 1 14:46:08 2011 +0100 + + Fix man page formatting + + Two option sections were not starting at the beginning of a new line. + +commit 63518c42234001ec96f638af5732c09079a3d682 +Author: Chris Wilson +Date: Mon Aug 1 13:36:28 2011 +0100 + + dri: Build fix for xserver-1.7.7 + + Back in the olden days before the introduction of dixRegisterPrivate(). + + Signed-off-by: Chris Wilson + +commit 7976f5144d42a03ccd027908252a600db2631054 +Author: Chris Wilson +Date: Sat Jul 30 09:21:36 2011 +0100 + + NEWS: 2.15.901 snapshot + + Signed-off-by: Chris Wilson + +commit 2cfb703bbe7ec043d443452f4fa94f06b1ff7266 +Author: Chris Wilson +Date: Sat Jul 30 09:23:22 2011 +0100 + + Fix typos for distcheck + + Signed-off-by: Chris Wilson + +commit 6f919264da69ed8bce6f2573629d89962a670783 +Author: Chris Wilson +Date: Sat Jul 30 09:00:06 2011 +0100 + + sna: Mark the stencil as untiled + + In reality, Mesa will be treating it as W-tiling, only we have no way of + communicating that requirement to the kernel (as not only does the + kernel not understand W-tiling, but also the GTT is incapable of fencing + a W-tiled region.). + + Ported from Chad Versace's 3e55f3e88. + + Signed-off-by: Chris Wilson + +commit 326a84e832c43cc200a32e091b4e60b8b6a4a7c8 +Author: Chris Wilson +Date: Fri Jul 22 11:10:26 2011 +0100 + + sna: Port IVB acceleration code (Xrender + Xv) + + Based on the superlative work by Kenneth Graunke and Xiang, Haihao. + + Signed-off-by: Chris Wilson + +commit 10790921570fea21d6b2bcc07a0204ef315c9182 +Author: Chris Wilson +Date: Sat Jul 30 08:46:19 2011 +0100 + + sna: Include the pixmap size in the debug info for moving to cpu + + Signed-off-by: Chris Wilson + +commit 5691c8cdec2a5264b8552f096b4a34b97afe4ae5 +Author: Kenneth Graunke +Date: Thu Jul 14 10:14:53 2011 -0700 + + render: Enable RENDER acceleration on Ivybridge. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 0d92612b2a2782f80196a08eb9a17af906169f18 +Author: Kenneth Graunke +Date: Thu Jul 14 00:30:09 2011 -0700 + + render: Update pixel shader state for Ivybridge. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 7460ee73d1fd22e6b02ce125f11ac38efff743ce +Author: Kenneth Graunke +Date: Thu Jul 14 00:16:54 2011 -0700 + + render: Use Ivybridge variants for 3D pipeline setup. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit e3a09608716c1dee2554e8fc26d6f77aeec684bd +Author: Kenneth Graunke +Date: Thu Jul 14 00:04:31 2011 -0700 + + render: Refactor to use newly shared pipeline setup code in i965_3d.c. + + Slightly generalize the shared SF and CC code to accomodate both. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 682a690bfeeabae710b1392282163eab35b58eed +Author: Kenneth Graunke +Date: Wed Jul 13 22:52:52 2011 -0700 + + Xv: Refactor out pipeline setup functions for future reuse in render. + + While we're at it, make the functions simply take an intel_screen_private + pointer directly instead of having to fetch it from ScrnInfoPtr. + + Also coalesce some gen6/gen7 functions that were 98% identical. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 54b3222658a285d26b7800bdc5f8343c918a804e +Author: Kenneth Graunke +Date: Wed Jul 13 22:27:37 2011 -0700 + + render: Update 3DPRIMITIVE for Ivybridge. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 4e491a1f6d7a15009904cb79e2c0b13cf2d9d6ec +Author: Kenneth Graunke +Date: Wed Jul 13 22:19:21 2011 -0700 + + render: Set Address Modify Enable in 3DSTATE_VERTEX_BUFFERS on Gen7. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 2787cd66f0d2907110f774392370537df63a96fa +Author: Kenneth Graunke +Date: Wed Jul 13 22:10:17 2011 -0700 + + render: Update SAMPLER_STATE for Ivybridge. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 1a7e541d0d33727953fa69f1e29fa4eda665a0d9 +Author: Kenneth Graunke +Date: Wed Jul 13 21:53:27 2011 -0700 + + render: Update SURFACE_STATE for Ivybridge. + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 07cc488bcf3f7653cd54928e3cedb1f4f102c5e0 +Author: Kenneth Graunke +Date: Sat Jul 9 01:36:52 2011 -0700 + + render: New Ivybridge assembly programs for render acceleration. + + These are exactly the same as the ones for Sandybridge, but with message + registers translated (hopefully) in the same way as Haihao's new + programs (m1 == g65). + + Signed-off-by: Kenneth Graunke + Acked-by: Eric Anholt + Acked-by: Chris Wilson + +commit 1b9e82b4b59dd50c1b057f58d71d5c04dcc648a7 +Author: Chris Wilson +Date: Tue Jul 26 08:29:36 2011 +0100 + + sna: Revert enabling scan-line wait on SNB + + Hanging the machine does indeed prevent video tearing. Just not quite + what the user expected... + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39497 + Signed-off-by: Chris Wilson + +commit 6dbbb74bde034f5f00aee0396ccd1e03a6625fbd +Author: Chris Wilson +Date: Sat Jul 16 14:05:54 2011 +0100 + + sna: Enable gen6 scan-line waiting + + The code was ready and waiting, just forgot to turn it on. + + Signed-off-by: Chris Wilson + +commit 3e55f3e88b40471706d5cd45c4df4010f8675c75 +Author: Chad Versace +Date: Mon Jul 18 00:38:00 2011 -0700 + + dri: Do not tile stencil buffer + + Until now, the stencil buffer was allocated as a Y tiled buffer, because + in several locations the PRM states that it is. However, it is actually + W tiled. From the PRM, 2011 Sandy Bridge, Volume 1, Part 2, Section + 4.5.2.1 W-Major Format: + W-Major Tile Format is used for separate stencil. + + The GTT is incapable of W fencing, so we allocate the stencil buffer with + I915_TILING_NONE and decode the tile's layout in software. + + This commit mutually depends on the mesa commit: + intel: Fix stencil buffer to be W tiled + Author: Chad Versace + Date: Mon Jul 18 00:37:45 2011 -0700 + + Signed-off-by: Chad Versace + Reviewed-by: Ian Romanick + Acked-by: Kenneth Graunke + +commit 212fa9868767637e8f430485eeb522c99e63fd16 +Author: Chris Wilson +Date: Wed Jul 13 21:11:14 2011 +0100 + + Disable adding normal RTF modes for an eDP + + This is causing a hard hang with 2.6.39+, we don't know why so play safe + and disable for the time being. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=38012 + Signed-off-by: Chris Wilson + +commit 7a695c9f6b919eba8785d62094526762ba2a0449 +Author: Chris Wilson +Date: Wed Jul 13 10:57:13 2011 +0100 + + sna: Fast-path single span boxes + + These are very common when compositing unclipped trapezoids, and the + majority of the overhead is in handling the arbitrary number of boxes + and misses out on the constant folding the compiler can do if it is + known we have just one box. + + Signed-off-by: Chris Wilson + +commit 0190964906ad878d469d6021c10cde4e7f5799c3 +Author: Chris Wilson +Date: Wed Jul 13 10:26:44 2011 +0100 + + sna/damage: Avoid testing against a completey damaged region + + Signed-off-by: Chris Wilson + +commit b929717c89352d4b47dc2b9ce58e26fbbf327201 +Author: Chris Wilson +Date: Wed Jul 13 09:49:09 2011 +0100 + + sna/gen3: Tune emit_spans_primitive_constant + + Signed-off-by: Chris Wilson + +commit fbdbfaf38d4da5204750d91cf5a3f43307a6ac33 +Author: Chris Wilson +Date: Wed Jul 13 17:38:41 2011 +0100 + + sna/glyphs: Discard GLYPH_PICTURE hint if the glyph doesn't fit into the cache + + If the glyph is too big to fit into the cache, than ideally we do want + to keep an associated GPU bo around for future use. As it is too large + to fit into the cache, it of reasonable size and there is little wastage + in allocating indiviual GPU bo for each oversized glyph. + + Signed-off-by: Chris Wilson + +commit 12f52530db1727e2f835e55dc922e5efaf4d3a16 +Author: Chris Wilson +Date: Wed Jul 13 17:38:22 2011 +0100 + + sna: Add some extra debugging to the texture upload fallback paths + + Signed-off-by: Chris Wilson + +commit a861094c23b5f0df7b889bcc03904e32c4c2c6be +Author: Chris Wilson +Date: Tue Jul 12 20:17:00 2011 +0100 + + sna/dri: Fix a couple of typos + + Somehow these were lost in the rebasing. + + Signed-off-by: Chris Wilson + +commit c221d0356db57c10f5d29ca17fdf592724b35385 +Author: Chris Wilson +Date: Tue Jul 12 15:39:42 2011 +0100 + + sna/dri: Remove the unused id/type members for Resource tracking + + ...and reduce it to a simple list. + + Signed-off-by: Chris Wilson + +commit 644b1a903301531e1fb59f27952c15e87888c4c6 +Author: Chris Wilson +Date: Tue Jul 12 11:50:24 2011 +0100 + + dri: Always initialise resource members of DRI2FrameEvent + + As we now attempt to always decouple the lists upon freeing the frame + event, we need to initialise them along all code paths. + + Signed-off-by: Chris Wilson + +commit 32f42358140ee812984149ae52b0df3dfd1778c3 +Author: Chris Wilson +Date: Mon Jul 11 20:29:53 2011 +0100 + + sna/dri: Add some simple debugging + + Signed-off-by: Chris Wilson + +commit a46598220ebf5d4e629e1e0a7baf47ce144ed2c8 +Author: Chris Wilson +Date: Mon Jul 11 14:40:30 2011 +0100 + + sna/dri: Refactor common code for assigning a pixmap to the DRI2 buffer + + Signed-off-by: Chris Wilson + +commit 7538be3315b8683b05e8f6b22023baadcc0bc4da +Author: Chris Wilson +Date: Mon Jul 11 10:50:36 2011 +0100 + + dri: Enable triple-bufferred pageflips + + By popular demand. + + Triple-buffering trade-offs output latency versus jitter. By having a + pre-rendered frame ready to swap in following a pageflip, we avoid the + scenario where the latency between receiving the flip complete signal + from the kernel, waking up the vsynced application, it render the new + frame and then for the server to process the swap request is greater + than the frame interval, causing us to miss the vblank. The result is + that application can become frame-locked to 30fps. Instead, we report to + the application that the first frame swap is immediately completed, + supply a new back buffer (or else the rendering would be blocked on + waiting for the front-buffer to be swapped away from the scanout) and + let them proceed to render the second frame. The second frame is added + to the swap queue, and the client throttled to vrefresh. (If the client + missed the vblank, the swap queue is empty and the client is immediately + woken again, whilst the pageflip is pending.) + + Note, for practical reasons this only applies to page-flipping, for + example, calls to glXSwapBuffer() on fullscreen applications. + + Signed-off-by: Chris Wilson + +commit 2608a367acba7247e50754c3daeed09ba2e97d05 +Author: Chris Wilson +Date: Mon Jul 11 16:28:15 2011 +0100 + + dri: Prevent abuse of the Resource database + + The Resource database is only designed to store a single value for a + particular type associated with an XID. Due to the asynchronous nature + of the vblank/flip requests, we would often associate multiple frame + events with a particular drawable/client. Upon freeing the resource, we + would not necessarily decouple the right value, leaving a stale pointer + behind. Later when the client disappeared, we would write through that + stale pointer upsetting valgrind and causing memory corruption. MDK. + + Instead, we need to implement an extra layer for tracking multiple + frames within a single Resource. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37700 + Signed-off-by: Chris Wilson + +commit ab1000821ae881a301fb0e1f2210493ec383e681 +Author: Chris Wilson +Date: Sat Jul 9 19:44:26 2011 +0100 + + dri: Remove the shadow copy of attachment + + Signed-off-by: Chris Wilson + +commit 9f22ea7ca440c788f8104647356393c96c62d155 +Author: Chris Wilson +Date: Sat Jul 9 14:54:33 2011 +0100 + + sna: Clamp results for computing BoxRec coords from xRectangle + + As the width/height in the rectangle is specified as uint16_t, the + result may be larger than is storagable in the int16_t of the box. Of + course it would take a really inane client to do attempt to draw + something much larger than the largest possible surface... Is it strange + that first example I've found to do so is a Java application? + + Reported-by: Nicolas Kalkhof + Signed-off-by: Chris Wilson + +commit f4c5dc88171435aa04a5d99372913120cdafe92b +Author: Chris Wilson +Date: Sat Jul 9 14:17:24 2011 +0100 + + sna/accel: Fix fallback for depth=1 copy + + A little carelessness with passing down the offsets caused us to + incorrectly copy depth=1 bitmaps, as exemplified by gkrellm. + + Reported-by: Nicolas Kalkhof + Signed-off-by: Chris Wilson + +commit 649ebcef0938c7cde4f3172a639d39488454999a +Author: Chris Wilson +Date: Fri Jul 8 17:44:58 2011 +0100 + + sna: A buffer only needs a flush if it remains dirty at the end of the batch + + Signed-off-by: Chris Wilson + +commit 625e37b317e4d237bdc9f80d7ab86b5d2badddc7 +Author: Chris Wilson +Date: Fri Jul 8 18:58:32 2011 +0100 + + sna/gen3: So we also need to ensure stippling is cleared... + + My theory that we used nothing that invoked polygon stippling proved + baseless. + + Fixes regression from 3b5971bd2359383cb8326702d80e03bc15d34c69 + + Signed-off-by: Chris Wilson + +commit 1e2cae0ab339e477929e429f8ff31b11fcaf2cbf +Author: Chris Wilson +Date: Fri Jul 8 09:54:43 2011 +0100 + + sna/gen3: Restore disabling the use of stencil/fog in the invariant + + One cleanup too far causing spurious results after rebooting. We also + need to ensure that the writemask is fully enabled (ie not disabled) + as well. + + Signed-off-by: Chris Wilson + +commit ec3dd64e739c4c2bbd8141de5275fe8a90f24a57 +Author: Chris Wilson +Date: Fri Jul 8 00:17:27 2011 +0100 + + sna/dri: Enable chaining of page-flips + + Trade off extra frames of latency for extra frames of anti-jitter + buffering and loss of completion information; compiz users rejoice. + + Signed-off-by: Chris Wilson + +commit a32694b0f07e35c22dd83bcfb828196d5d86628e +Author: Chris Wilson +Date: Thu Jul 7 23:11:39 2011 +0100 + + sna/dri: Remove redundant NULL check in reference + + The buffer has already been dereferenced by this point... + + Signed-off-by: Chris Wilson + +commit d180c5f5f781f4fa7f747dd7bb8073a20771cd79 +Author: Chris Wilson +Date: Wed Jul 6 20:19:00 2011 +0100 + + sna: Take advantage of the needs_flush tracking on the front buffer + + Signed-off-by: Chris Wilson + +commit 0be47f459ba576ed3f93367de18732fb2367357a +Author: Chris Wilson +Date: Wed Jul 6 13:02:53 2011 +0100 + + sna: Check against an execbuffer reference before discarding partials + + Signed-off-by: Chris Wilson + +commit f6573fe7577e00a1d2706dbc39179ab658c021d2 +Author: Chris Wilson +Date: Wed Jul 6 12:44:08 2011 +0100 + + sna: Compute aligned tiled heights for gen2 correctly + + We were underestimating the height of X-tiled surfaces (and less + harmfully overestimating the height of Y-tiled surfaces.) + + Signed-off-by: Chris Wilson + +commit d6afd66461ebcdc2e8dcd94b3f46f374d8acf469 +Author: Chris Wilson +Date: Tue Jul 5 23:12:59 2011 +0100 + + sna: Reset unused partial buffers + + Whilst searching for available space on the active partial buffer list, + if we discover an unreferenced one, reset its used counter to zero. + + Signed-off-by: Chris Wilson + +commit 6e7a0c86419bf6c928837f592784333c25d8b27b +Author: Chris Wilson +Date: Tue Jul 5 23:05:37 2011 +0100 + + sna: Discard unused partial buffers + + If we allocate a partial buffer and then fallback for the operation, the + buffer would remain on the partial list waiting for another user. + Discard any unused partials at the next batch submission or expiration + point. + + Signed-off-by: Chris Wilson + +commit 3b5971bd2359383cb8326702d80e03bc15d34c69 +Author: Chris Wilson +Date: Tue Jul 5 22:20:28 2011 +0100 + + sna/gen2: Restore invariant ENABLES + + One deletion too many, unnoticed until the next reboot. Besides the + failure to disable logic op and enable colour buffer blending which + causes a hang if you subsequently try to enable both, you also need + to request texture caching... + + Signed-off-by: Chris Wilson + +commit 5fa3e73f2c03bcadb87c1760f76f853c22fdba18 +Author: Chris Wilson +Date: Tue Jul 5 21:38:08 2011 +0100 + + sna/gen[23]: Do as the comments suggest and prefer the BLT + + Signed-off-by: Chris Wilson + +commit f749ed618e21b56a36a2feb9b4333ec797ec2ae5 +Author: Chris Wilson +Date: Tue Jul 5 21:37:02 2011 +0100 + + sna: Reduce tiling if pitch is less than a tile_width/height only on pre-G33 + + (Note this only applies to 2D pixmaps.) + + The rationale, borne out by experimentation with cairo-perf-trace, is + that on the pre-G33 devices we always need a fence region region + for tiled surfaces, i.e. at least .5/1MiB in size, and that combined + with the smaller GTT on those devices, we loose the benefit of tiling to + the excessive GTT thrashing. + + Signed-off-by: Chris Wilson + +commit b9de6a98d33db660ffad3f186c2b0ab2aea71ac0 +Author: Chris Wilson +Date: Tue Jul 5 17:48:11 2011 +0100 + + sna: Remove unused aperture_size member + + Signed-off-by: Chris Wilson + +commit fd3bc2af471a3f9a73064cb28818fdd3485cffc7 +Author: Chris Wilson +Date: Mon Jul 4 16:31:20 2011 +0100 + + sna: Clamp object size to the min of 1/4 of the whole GTT or 1/2 the mappable + + ... for those pesky early devices whose GTT was no larger than the AGP + aperture. + + Signed-off-by: Chris Wilson + +commit d294e41a6a49ddaa6f8d7d5cda266168095fe1f5 +Author: Chris Wilson +Date: Mon Jul 4 13:45:06 2011 +0100 + + sna: Update flush/retirement lists after a implicit flush for mmap + + Signed-off-by: Chris Wilson + +commit 3e53b0f3a365c031bfef8d087bcee0ae1c2d2988 +Author: Chris Wilson +Date: Mon Jul 4 13:44:28 2011 +0100 + + sna: Enable relaxed-fencing for gen2 devices + + (Just as dependent upon non-buggy kernels as gen3...) + + Signed-off-by: Chris Wilson + +commit 33ddaf54299979e98b196d479f1b2060d9551cc5 +Author: Chris Wilson +Date: Mon Jul 4 13:43:48 2011 +0100 + + sna: Fix gen2 tiled surface sizes + + Actually use the gen2 path for gen2 devices! + + Signed-off-by: Chris Wilson + +commit 9eceddf69f78fc79c02ca75ed10b000beeff2033 +Author: Chris Wilson +Date: Mon Jul 4 13:42:58 2011 +0100 + + sna/gen2: fix batch buffer acounting + + Signed-off-by: Chris Wilson + +commit 3f80f7edb8c511b94e66159cd59ba9362c3f69a2 +Author: Chris Wilson +Date: Sat Jul 2 23:16:04 2011 +0100 + + sna: Manually set to the GTT domain for mmap + + ...since the kernel no longer does strict coherency. + + Signed-off-by: Chris Wilson + +commit f91ee24b2dabb48288d6e81dcdd82191f158e312 +Author: Chris Wilson +Date: Sat Jul 2 23:05:04 2011 +0100 + + sna: Trim number of downsample passes + + If we can fit the entire width or the entire height into the pipeline + when downsampling, do so. + + Signed-off-by: Chris Wilson + +commit 6db93720a73f59a9857a3c5ab260fab8b957813e +Author: Chris Wilson +Date: Sat Jul 2 23:04:14 2011 +0100 + + sna: Don't change tiling modes on replace + + This was trying to workaround a kernel bug, and instead causes a + performance cliff for textures that *need* to be tiled. + + Signed-off-by: Chris Wilson + +commit 430c905ef306ece8a4cb19091711a9feae74b00b +Author: Chris Wilson +Date: Sat Jul 2 18:24:40 2011 +0100 + + sna: Force tiled modes for large pitches + + If the surface is so big that the 2x2 texel sampling will cause a TLB + miss everytime, i.e. the row pitch exceeeds 4096, then we need to + encourage tiling to prevent attrocious performance. + + For example, try downscaling a 2560x1600 background image on a gen3 + device using I915_TILING_NONE... + + Using slideshow-demo /usr/share/backgrounds/cosmos/whirlpool.jpg, on a + PineView netbook, fps goes from under 4 to over 40. + + Signed-off-by: Chris Wilson + +commit ae567b783e5af53f17f49dbf58b9be17fcb53737 +Author: Chris Wilson +Date: Sat Jul 2 00:11:21 2011 +0100 + + sna: Finer-grained debugging for trapezoids + + Signed-off-by: Chris Wilson + +commit 98f2e3855d70c02b05e2721a70ebce0c17e44283 +Author: Chris Wilson +Date: Sat Jul 2 09:53:11 2011 +0100 + + sna/video: Downgrade severity of "overlay not found" message + + We don't need to warn the user that their hardware does not support the + video overlay plane (but Jesse is working on it!), but merely inform + them that its presence is lacking. + + Signed-off-by: Chris Wilson + +commit 01c258718e981f4da949a4e48595a0660d55d66e +Author: Chris Wilson +Date: Fri Jul 1 23:17:54 2011 +0100 + + sna/gen2: Add missing stub debug files + + Signed-off-by: Chris Wilson + +commit 5c8a108d2c99f542372efb1734c96ddd2af6bc76 +Author: Chris Wilson +Date: Fri Jul 1 21:24:43 2011 +0100 + + sna/gen2: Recompute blend pipeline for component-alpha pass + + Signed-off-by: Chris Wilson + +commit 121511d3bd63da5eca28edf971aae3d062aed46e +Author: Chris Wilson +Date: Fri Jul 1 16:54:28 2011 +0100 + + sna/gen2: Pack solid sources into the default diffuse component + + Signed-off-by: Chris Wilson + +commit a303f85c163979276ff13e00b7c56f55b5fd1d07 +Author: Chris Wilson +Date: Fri Jul 1 16:27:11 2011 +0100 + + sna/gen2: Remove unused state from invariant setup + + ... and also some state that gets clobbered when we install the + composite pipelines. + + Signed-off-by: Chris Wilson + +commit 120c98ac10435c8e848a8337c1f544f81a05cd3a +Author: Chris Wilson +Date: Fri Jul 1 14:55:44 2011 +0100 + + sna: Downsample sources 2x too large to fit in the 3D pipeline + + This is quite trivial to hit given the 2k limits on gen2/gen3. We + compromise on image quality by pre-downscaling the source by a fixed + factor to make it fit into the pipeline in preference to performing the + entire operation on the CPU. + + Signed-off-by: Chris Wilson + +commit f6c8c3bb6fd75bca6c7704b7d5869a5d44ce3832 +Author: Chris Wilson +Date: Fri Jul 1 11:17:32 2011 +0100 + + sna/gen2: Use specular component for solid spans + + Signed-off-by: Chris Wilson + +commit de14e3c8595f9e315dc3ce23ad15b04e118499f4 +Author: Chris Wilson +Date: Fri Jul 1 09:58:27 2011 +0100 + + sna/gen2: Add missing render fallbacks for blt ops + + Signed-off-by: Chris Wilson + +commit ecbf6bbd27b1205dcf76cfe34ae2a7a3f5ec195a +Author: Chris Wilson +Date: Fri Jul 1 08:50:58 2011 +0100 + + sna/gen2: Implement composite-spans + + Signed-off-by: Chris Wilson + +commit c89b37d7b43c9e588097b7fadcba3bc13a03f8bc +Author: Chris Wilson +Date: Thu Jun 30 17:53:49 2011 +0100 + + sna: Mappable aperture is region 0 on gen2 + + Signed-off-by: Chris Wilson + +commit c0434ab49035bf278dad6f5f84a541ea58536fb4 +Author: Chris Wilson +Date: Thu Jun 30 16:31:28 2011 +0100 + + sna: Distinguish 830/845 vs 855/865 using the generation id + + Remove the PCI ID device checks by using the simpler check on the + generation id for errata pertaining to 830/845. + + Signed-off-by: Chris Wilson + +commit 18d08e49d270b7a05f14a309759c9315e5ab9679 +Author: Chris Wilson +Date: Tue Jun 28 20:25:46 2011 +0100 + + uxa/glyphs: Fallback instead of crashing on large strings + + Not ideal, but being slow is a major improvement over losing data. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36860 + Signed-off-by: Chris Wilson + +commit 95866bd6bdaeb612732fd43ec1b93e088763086e +Author: Chris Wilson +Date: Mon Jun 27 21:07:22 2011 +0100 + + sna/video: Use EXTEND_PAD to avoid mixing in the border color + + ...which is 0 and appears green around an unaligned YUV-video. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38723 + Signed-off-by: Chris Wilson + +commit 7446b39f04306ae2ffccdfe8dd6c8bda64a27043 +Author: Chris Wilson +Date: Mon Jun 27 15:26:49 2011 +0100 + + sna: Disable XVideo using the TexturedAdapter if the GPU is wedged + + Signed-off-by: Chris Wilson + +commit 44cd6ebf43aa5b7f23c03629a11cdf83b6e96e3a +Author: Chris Wilson +Date: Sun Jun 26 18:41:20 2011 +0100 + + sna: Typo in debug assertion. + + Signed-off-by: Chris Wilson + +commit 5cd7f5b59857f221bd3aa9965b43b938ff7824ed +Author: Chris Wilson +Date: Sun Jun 26 18:36:05 2011 +0100 + + sna/dri: Mark the GPU bo as damaged upon a page-flip + + ...so that CPU pixmap is correctly invalidated for the next readback. + For instance, if you were to take a screenshot on a composited destkop. + + Reported-by: Sitosfe Wheeler + Signed-off-by: Chris Wilson + +commit c4f7959266571f14c43c0f0cea69134bb8556875 +Author: Chris Wilson +Date: Sun Jun 26 14:09:11 2011 +0100 + + sna: Only create bo up to half the size of the mappable aperture + + As we use GTT mappings if writing directly into the tiled buffer and the + available aperture is reported by the kernel as the total GTT and not + limited to the fenceable/mappable region, we need to manually probe this + value and ensure that our creation and fenced routines observe this + distinct limit. + + Signed-off-by: Chris Wilson + +commit 130350111720a0e4ae825bb9d21a8c481cd2b548 +Author: Chris Wilson +Date: Sat Jun 25 23:21:20 2011 +0100 + + sna/dri: Reorganise schedule_swap to not confuse immediate and wait paths + + Eeek, the wait-for-target-msc was using the immediate swap path, meaning + that for copy-swaps the copy was submitting immediately but the client + throttled waiting upon the target vblank. What is actually intended is + for the presentation to be delayed until the target_msc. + + Signed-off-by: Chris Wilson + +commit b460b9645451af84136c5daebbc00c7545de67f4 +Author: Chris Wilson +Date: Sat Jun 25 16:34:15 2011 +0100 + + sna/dri: Fix composited copy-swaps + + The secret is not to cheat and render directly to the front buffer, but + remember to mark the Window as damaged. + + Signed-off-by: Chris Wilson + +commit 28fffbd1d07890c8b4d697369159f6a30f267675 +Author: Chris Wilson +Date: Sat Jun 25 16:33:31 2011 +0100 + + sna/display: Protect against drmModeGetCrtc returning NULL + + Signed-off-by: Chris Wilson + +commit 2c73b4651a04390668c3ed2aa10699663e44fd8a +Author: Chris Wilson +Date: Sat Jun 25 16:32:30 2011 +0100 + + sna/gen4+: Use the drawable rectangle offset for copy boxes + + Saves a little bit of work whilst emitting the rectangles. + + Signed-off-by: Chris Wilson + +commit 3833ff967766b0b99f1d636c6453de1783a90586 +Author: Chris Wilson +Date: Sat Jun 25 14:02:50 2011 +0100 + + sna: Correct typo in computing damage of PolyPoint + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38614 + Signed-off-by: Chris Wilson + +commit 471115a9806162bf0cafe27947f49d94fdd63d87 +Author: Chris Wilson +Date: Fri Jun 24 13:32:45 2011 +0100 + + sna: Also allow BLT copies to discard the alpha channel + + Signed-off-by: Chris Wilson + +commit c3b1a0d7046a83b6daec03e5a562116e3adf3c71 +Author: Chris Wilson +Date: Fri Jun 24 12:19:09 2011 +0100 + + sna/dri: Copy to real front upon swap + + The front-buffer of a DRI2 drawable, may not in fact be pointing to the + scanout pixmap. So override the destination for swapbuffers to update + the scanout. + + Signed-off-by: Chris Wilson + +commit 669378cd8db8af89d12f1b95a07fc1ead0b1569c +Author: Chris Wilson +Date: Fri Jun 24 11:53:17 2011 +0100 + + sna: Wrap the fbcon in a scratch pixmap for render-copy across depth changes + + Signed-off-by: Chris Wilson + +commit 33b2ea0392fe944b210ef744398aa22989bfdf33 +Author: Chris Wilson +Date: Fri Jun 24 11:43:07 2011 +0100 + + sna: Avoid using the BLT to copy between mismatching depths + + We either conflated bpp (which fails given a mixture of depth-24 and + depth-30 pixmaps) or neglected to check at all. + + Signed-off-by: Chris Wilson + +commit 28f6dc24d3c50aa399dd098a9ba6a18a95837800 +Author: Chris Wilson +Date: Fri Jun 24 11:24:59 2011 +0100 + + sna: Support depth-30 and some more logging to show the depth + + Signed-off-by: Chris Wilson + +commit 312460ea69792594fe9acca8591ead55baea7d99 +Author: Xiang, Haihao +Date: Thu Jun 23 00:20:03 2011 +0800 + + Xv: set up pipeline for Xv on Ivybridge + + The configuration is same as that on Sandybridge, but + many state commands are changed + + Signed-off-by: Xiang, Haihao + +commit 90a0800588f83d78254136b94bca656c4c24215d +Author: Xiang, Haihao +Date: Tue Jun 21 14:14:38 2011 +0800 + + Xv: upload new shaders to GEM objects for Xv on Ivybridge + + Signed-off-by: Xiang, Haihao + +commit 00614f712b243a7724cf919f94d204a123d2789a +Author: Xiang, Haihao +Date: Thu Jun 23 00:09:21 2011 +0800 + + Xv: update SURFACE_STATE & SAMPLER_STATE for Xv on Ivybridge + + SURFACE_STATE & SAMPLER_STATE are changed since Ivybridge + + Signed-off-by: Xiang, Haihao + +commit 70f884772a3adc5dbf56572499c5fb2e080aa84a +Author: Xiang, Haihao +Date: Thu Jun 23 00:02:38 2011 +0800 + + Xv: New shaders for Xv on Ivybridge + + Redefine some M4 macros, also update the check for + intel-gen4asm to support Ivybridge + + Signed-off-by: Xiang, Haihao + +commit 3cf423bd3a9483181e59ee87376a9487fa1f923d +Author: Xiang, Haihao +Date: Wed Jun 22 23:33:08 2011 +0800 + + Xv: separate fragments from M4 macros + + It is to prepare for Xv on Ivybridge. The difference from Sandybridge + is that all message payload must be in GRF registers instead of MRF registers + on Ivybridge. We will only redefine some M4 macros for Ivybridge + + Signed-off-by: Xiang, Haihao + +commit 58d7a89b93ba4022f45465e479d2799b8903137a +Author: Chris Wilson +Date: Fri Jun 24 00:35:30 2011 +0100 + + sna: Don't render to invalid surfaces + + Fixes a regression from d0362a. In bypassing the is_wedged checked, we + also ended up bypassing the checks that we could indeed render to the + target bo. With the result that we were creating GPU buffers for SHM + surfaces, something that requires Xserver fixes before we can actually + enable... + + Signed-off-by: Chris Wilson + +commit 3c1d5bc35e02dfd8234c029dcab5661e1656ca8e +Author: Chris Wilson +Date: Fri Jun 24 00:34:11 2011 +0100 + + sna: Clip the fbcon to the frontbuffer + + ...both to correct the placement of the fbcon into the smaller scanout and + to ensure that we correctly clip the boxes to be copied. + + Signed-off-by: Chris Wilson + +commit e3b4c10f239f69e5282bde1d3b0c3685b24cf0aa +Author: Chris Wilson +Date: Thu Jun 23 20:54:28 2011 +0100 + + sna: Relent and workaround the lack of O_NONBLOCK on /dev/dri/card0 + + So in order not to block server shutdown, check that the fd is readable + before attempting to read from it. + + Signed-off-by: Chris Wilson + +commit 33d3077266942b23c5bc05ef4a9a6cebe357272a +Author: Chris Wilson +Date: Thu Jun 23 15:53:45 2011 +0100 + + sna: Debug compile fix, and some extra comments + + Signed-off-by: Chris Wilson + +commit 03e6aee8fd2cc7486fbd2ec55a537c712786486b +Author: Chris Wilson +Date: Thu Jun 23 15:51:59 2011 +0100 + + sna: For an unbounded op, we need to convert the whole surface + + Otherwise if we fail to check, then we create a 0x0 surface to sample + with the operation -- net result is that we end up using a clear source + instead of the desired mask. + + Signed-off-by: Chris Wilson + +commit 356ded1308e8fe5f8dbec217b219228a991356d5 +Author: Adam Jackson +Date: Wed Jun 22 17:17:15 2011 -0400 + + Don't include xf86Priv.h + + I'd like it to not be in the SDK anymore, and we're not using anything + from it. + + Signed-off-by: Adam Jackson + Signed-off-by: Chris Wilson + +commit 8fb98e22a63a4354b049ace7870abb6406541c28 +Author: Jian Zhao +Date: Wed Jun 22 08:54:59 2011 +0800 + + configure: Define required_xorg_xserver_version later so it can make successfully. + +commit ea71133da78632d4cfee5b0b4c96e8dddd6cdf44 +Author: Chris Wilson +Date: Tue Jun 21 12:28:13 2011 +0100 + + sna/video: Use pwrite for upload of unclipped, unrotated frames + + Signed-off-by: Chris Wilson + +commit 2f6afb5b1f02cc448da1b342627108ceddda4f0d +Author: Chris Wilson +Date: Mon Jun 20 17:29:17 2011 +0100 + + sna: Only reduce gpu damage after migration + + Otherwise we end up doing work for no reason, ala the regression in + grads-heat-map. However, it is important that the damage is reduced at + some point or else it may grow unbounded. Hopefully normal usage will + never hit the pathologocial case... + + Signed-off-by: Chris Wilson + +commit 88d840b53d64e67cfee14cc4cef8da46d716c401 +Author: Chris Wilson +Date: Mon Jun 20 15:22:57 2011 +0100 + + sna/gen4: Check for sufficient batch space before emitting pipelined pointers + + For the broken shader workaround, we need to reset the pipeline state + before every blt as the state is changed by the magic CA pass. So we + need to check that we actually have sufficient space to emit the + pipelined pointers before doing so. + + Signed-off-by: Chris Wilson + +commit 84bd6e51199bf8b49e6f6e0c29a1d71c89f6996f +Author: Chris Wilson +Date: Mon Jun 20 15:22:00 2011 +0100 + + sna/gen4: Correct the number of dwods required to emit the ca pass + + We need 7 for pipelined pointers, 6 for the primitive and 1 for the + flush. + + Signed-off-by: Chris Wilson + +commit 22255335e428cb1f349fe4198d36e0ab3fe06948 +Author: Chris Wilson +Date: Mon Jun 20 13:51:12 2011 +0100 + + sna: Don't perform a GPU copy of the scanout if it is wedged. + + Signed-off-by: Chris Wilson + +commit e2684498a4905b4ac157a1c752c1c4f75301e7ad +Author: Chris Wilson +Date: Mon Jun 20 13:50:43 2011 +0100 + + sna: Add some debugging asserts for handling wedged GPUs + + Signed-off-by: Chris Wilson + +commit d0362a20bb3ead2fab9401b63209f917bdd72d55 +Author: Chris Wilson +Date: Sun Jun 19 19:33:01 2011 +0100 + + sna: Bypass the gpu-is-wedged? check for forced bo creation + + In order to attach a scanout (and use swrast) on a wedged GPU, we need to + bypass the safety checks for normal pixmap creation. + + Signed-off-by: Chris Wilson + +commit 585667c2f9f88554ed89ff21ae38600f761d964c +Author: Chris Wilson +Date: Sat Jun 18 15:52:22 2011 +0100 + + sna: Bump the required xserver version to 1.10 + + SNA requires some pending bug fixes to the xserver so it makes little + sense to conditionalise the code and deliberately cause broken + behaviour. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=3843 + Signed-off-by: Chris Wilson + +commit de0286ed9f7814f903d56e488c7a4b3eb0ca56b0 +Author: Chris Wilson +Date: Fri Jun 17 09:40:53 2011 +0100 + + sna/display: After copying the fbcon, tell the server that we have a background + + ... so that the core knows to skip the clear. + + Signed-off-by: Chris Wilson + +commit f3869d60cc3bc349d1efba642baa011378f1c09b +Author: Chris Wilson +Date: Fri Jun 17 09:37:15 2011 +0100 + + sna/display: Apply damage for the fbcon copy + + ... so that any immediate shadow usage will read back the fbcon + contents. + + Signed-off-by: Chris Wilson + +commit 39f0b0ae17d00402971bb62555d3807bdf39ee93 +Author: Chris Wilson +Date: Thu Jun 16 23:49:06 2011 +0100 + + sna: Copy the fbcon contents onto the front buffer upon X startup + + This patch has been carried by the distributions every since they + started doing graphical boot splashes. Time to integrate it and give it + some TLC. + + Signed-off-by: Chris Wilson + +commit 37ba33f502af0878f6cb75f890c9fe288d0f7e41 +Author: Chris Wilson +Date: Fri Jun 17 07:03:25 2011 +0100 + + sna: Fix kgem_create_from_name error paths and to mark the bo as non-reusable + + Signed-off-by: Chris Wilson + +commit 665bc1735748f266fad5255f82c40edc59ef98e5 +Author: Chris Wilson +Date: Fri Jun 17 07:00:54 2011 +0100 + + sna/display: Remove the caching of the drmModeCrtc + + We only use it for the id. Everything else stored on it, like the + buffer_id, is not permanent and we need to query the current status as + required. + + Signed-off-by: Chris Wilson + +commit ad6235cfb11a5dfdd27106ac45106aaacba73bde +Author: Chris Wilson +Date: Thu Jun 16 19:02:36 2011 +0100 + + sna/accel: convert BOX_ADD_RECT to an inline function + + Signed-off-by: Chris Wilson + +commit a86f43988c4ded10cc3b1b964668300c9aa3af59 +Author: Chris Wilson +Date: Thu Jun 16 19:00:09 2011 +0100 + + sna/accel: convert BOX_ADD_PT to an inline function + + Signed-off-by: Chris Wilson + +commit f67a26590aadac8b9b9870ae3b03d23eb7eda1a2 +Author: Chris Wilson +Date: Thu Jun 16 18:58:38 2011 +0100 + + sna/accel: convert TRIM_AND_TRANSLATE_BOX to an inline function + + Signed-off-by: Chris Wilson + +commit df1b117dedfdda425fbc3e4ee394169902df4716 +Author: Chris Wilson +Date: Thu Jun 16 18:57:38 2011 +0100 + + sna/accel: convert TRANSLATE_BOX to an inline function + + Signed-off-by: Chris Wilson + +commit 76ff3c715cf6059316d08217e7e7783ca0388393 +Author: Chris Wilson +Date: Thu Jun 16 18:56:24 2011 +0100 + + sna/accel: convert TRIM_BOX to an inline + + Signed-off-by: Chris Wilson + +commit e4a66368e71df288323fce66b27237f1d9f93c3a +Author: Chris Wilson +Date: Thu Jun 16 18:55:03 2011 +0100 + + sna/accel: convert CLIP_BOX to an inline function + + Signed-off-by: Chris Wilson + +commit d7b51cc5d6e624a72b2f2fb92b4488e49a1c749c +Author: Chris Wilson +Date: Thu Jun 16 18:52:56 2011 +0100 + + sna/accel: convert BOX_EMPTY macro to an inline function + + Signed-off-by: Chris Wilson + +commit 1c3c08e80f08adb12a03277a60c4a56115281743 +Author: Chris Wilson +Date: Thu Jun 16 18:37:43 2011 +0100 + + sna: Fix the typo in BOX_EMPTY + + BOX_EMPTY(&box) surprisingly compiles and generates interesting code that + evaluates to if (0). Oops. + + Signed-off-by: Chris Wilson + +commit 17bf0019b6962c06c87a08e4b41799481eaccd26 +Author: Chris Wilson +Date: Thu Jun 16 14:26:06 2011 +0100 + + sna: Only retire requests after IO if the bo was active + + We only want to process retirements if we know we caused a stall waiting + for the GPU to release the bo before performing IO. + + Signed-off-by: Chris Wilson + +commit b707f18d17564653a2b45adf46a4e8eafcc6ab2c +Author: Chris Wilson +Date: Thu Jun 16 14:16:06 2011 +0100 + + sna: Purge the bo cache only if we detect aperture thrashing + + Signed-off-by: Chris Wilson + +commit 855ced5a4eb67e287001ae22cb6489639c548cfa +Author: Chris Wilson +Date: Thu Jun 16 13:24:14 2011 +0100 + + uxa: Remove the attempt to use the 3D pipeline for core rendering + + The attempt was still ridden with bugs, such as + + http://bugs.freedesktop.org/show_bug.cgi?id=28768 + http://bugs.freedesktop.org/show_bug.cgi?id=28798 + http://bugs.freedesktop.org/show_bug.cgi?id=28908 + http://bugs.freedesktop.org/show_bug.cgi?id=29401 + + A fresh approach was taken with SNA, but in the mean time before that + can be enabled downstream, restore correct behaviour. + + Signed-off-by: Chris Wilson + +commit dd4ad11e0d432f3a8eff4574a241c16f8463278d +Author: Chris Wilson +Date: Thu Jun 16 12:53:22 2011 +0100 + + sna: compile fix. + + A pox on all those who write trivial patches, attempt to compile on a + system not having dri2proto and just assume that all is good. + + Signed-off-by: Chris Wilson + +commit 2ff36af7e1841a82fd43a9317d07b3229a309df5 +Author: Chris Wilson +Date: Thu Jun 16 11:23:16 2011 +0100 + + sna/accel: Prevent initialising a region with an invalid box + + pixman complains if you attempt to use a region created with an invalid + box, so don't do that. + + Reported-by: Reinhard Karcher + Signed-off-by: Chris Wilson + +commit 3c02110052ecf69d43577ed8537a8850227da560 +Author: Chris Wilson +Date: Thu Jun 16 10:30:58 2011 +0100 + + sna/dri: Add some comments to explain the choice of flags upon the bo + + Signed-off-by: Chris Wilson + +commit 881f961a1c78e554e566ef624d6edcf28fee8fdf +Author: Chris Wilson +Date: Wed Jun 15 19:11:05 2011 +0100 + + sna: Clear the gpu flag once is not busy and no flush is pending + + Signed-off-by: Chris Wilson + +commit a1ee4b930846d4ba9274028c08800b882fc926f1 +Author: Chris Wilson +Date: Tue Jun 14 23:46:15 2011 +0100 + + sna/dri: And fix the blit swap paths + + Following on the recent successes with the pageflip paths. + + Signed-off-by: Chris Wilson + +commit 2f675cf402a6d158448a9300779829a10ca991fd +Author: Chris Wilson +Date: Tue Jun 14 08:13:58 2011 +0100 + + sna: Split zaphod across the crtcs + + Since we have no global resource allocator for zaphod mode, that's what + RandR-1.4 solves, we have to further constrain zaphod mode to only use + one crtc per screen. This also means that you must match the output + restrictions within the Screen definitions, noting that the crtc pipe id + corresponds with the screen number. + + Reportede-by: Phillp Haddad + Signed-off-by: Chris Wilson + +commit 49f265915a4bca52724c345f04cddfeaca972655 +Author: Chris Wilson +Date: Tue Jun 14 07:59:50 2011 +0100 + + sna: Compile fix for debugging enabled + + Signed-off-by: Chris Wilson + +commit 12b8a62652e219de255fdd8b3c801c23274130e9 +Author: Chris Wilson +Date: Mon Jun 13 20:51:56 2011 +0100 + + test: Exclude the long running stress tests from make distcheck + + tinderbox complains when it is left running for days on end... + + Reported-by: Jeremy Huddleston + Signed-off-by: Chris Wilson + +commit 4173ca344bb7d3fb7c03ebdce0e31aa82dba1192 +Author: Chris Wilson +Date: Mon Jun 13 22:31:55 2011 +0100 + + sna: Invalidate the mode if the front pixmap was swapped whilst blanked + + Signed-off-by: Chris Wilson + +commit 2158534421f26bcd1eca9ad74ab7a30f27e47a75 +Author: Chris Wilson +Date: Mon Jun 13 15:27:23 2011 +0100 + + sna/dri: Accurately track front and pending front for async flips + + By not tracking the front buffer correctly, i.e. performing the exchange + on every swap, GL_FRONT was no longer pointing at the updated buffer and + neither was the root pixmap. So both X and GL would read the wrong + buffer was the flip was pending. + + The other issue was that we would feed the old front buffer back to the + application as a future back buffer (due to buffer caching) and so the + kernel would duly insert a WAIT_EVENT for the pending flip to complete + before allowing rendering to affect it. + + Signed-off-by: Chris Wilson + +commit 2facaa910798c0e7adb34345e6d6913849b7d8a3 +Author: Chris Wilson +Date: Mon Jun 13 11:46:04 2011 +0100 + + sna/dri: Complete the pending async flip even after DrawableGone + + If the client exits before the async page-flip completes then we still + need to decrement the pending flip count in order to correctly flip the + scanout next time. + + Signed-off-by: Chris Wilson + +commit 86888723901030c5cb9da16cbb03508d4b13332f +Author: Chris Wilson +Date: Sun Jun 12 22:38:01 2011 +0100 + + sna: Just do a pointer exchange when flipping with no scanout + + Signed-off-by: Chris Wilson + +commit b881d1b16a8beec024ac18eca8308418e34cb05d +Author: Chris Wilson +Date: Sun Jun 12 20:13:26 2011 +0100 + + sna: Check that the scanout is still attached before waiting for scanline + + Signed-off-by: Chris Wilson + +commit bb08e73c557c379ef131225ffea5aa729ca781d6 +Author: Chris Wilson +Date: Sun Jun 12 20:07:20 2011 +0100 + + sna: Prevent tracking scratch pixmaps on older xservers + + Before the xserver is patched to send notification of release of the + scratch pixmaps, we cannot associated GPU resources with them. In + practice, the only advantage for doing so is for SHM pixmaps... + + Signed-off-by: Chris Wilson + +commit ff262aca9c46b7616c59d8e8f04d33a5bbc6e324 +Author: Chris Wilson +Date: Sat Jun 11 10:15:14 2011 +0100 + + sna/dri: Fix tripple-buffering for vblank_mode=0 + + Signed-off-by: Chris Wilson + +commit b199bc2b415fd0f06e456e0b1f44dd25ba8dbe02 +Author: Chris Wilson +Date: Sat Jun 11 09:57:46 2011 +0100 + + sna/dri: Skip querying current msc for immediate swaps + + Signed-off-by: Chris Wilson + +commit 5f4dbcc8bde3690668bde739ac61178037612475 +Author: Chris Wilson +Date: Sat Jun 11 09:06:50 2011 +0100 + + sna/dri: Queue page-flips immediately for next vblank + + Signed-off-by: Chris Wilson + +commit 00e8b4bec6dc5bb46e6f073af9c1fa34f4a2c2c9 +Author: Chris Wilson +Date: Sat Jun 11 09:00:16 2011 +0100 + + sna/dri: For offscreen, swaps just exchange the buffers + + Signed-off-by: Chris Wilson + +commit e9397b28eff5be4cd5e8a2ceca80333424f24391 +Author: Chris Wilson +Date: Sat Jun 11 08:54:04 2011 +0100 + + sna: Process dri wakeups first + + The goal is to minimise the latency in receiving the event from the + kernel and acting upon it. + + Signed-off-by: Chris Wilson + +commit bcad5b21fef4573f3144608364cf5b1ea6d241e3 +Author: Chris Wilson +Date: Fri Jun 10 21:27:38 2011 +0100 + + sna: Unbreak configure after last commit + + I went a step too far... I still need some define in order to switch + between uxa/sna at compile time. + + Signed-off-by: Chris Wilson + +commit d0d65940b4f4d4993eccb8c66ec7e8b633b331da +Author: Chris Wilson +Date: Fri Jun 10 19:51:12 2011 +0100 + + sna: Remove the ability to disable chipset specific code + + This was a fun little, but pointless, exercise. + + Signed-off-by: Chris Wilson + +commit 6f035e80b98e478ff4c59427e50e57ecd710da62 +Author: Chris Wilson +Date: Fri Jun 10 18:41:56 2011 +0100 + + sna/dri: Keep reference on swap buffers until the end of the pageflip + + Signed-off-by: Chris Wilson + +commit cf6c7901825bb831443615ef21555c5843184bdb +Author: Chris Wilson +Date: Fri Jun 10 17:49:13 2011 +0100 + + sna: Use the ScreenPixmap->serialNumber as a generation count + + DRI2 presumes that the pixmap->serialNumber can be used as unique id. + If it changes revokes *all* the buffers, it presumes a new pixmap has + been attached to the window, for example after a reconfiguration event + (resizing of a window, or a mode switch). However, as we updated the + root pixmap upon a pageflip, we were triggering revocations everytime, + causing further revocations and massive aperture thrashing. + + Signed-off-by: Chris Wilson + +commit 3f19270d6795738b58d9ce1721896b3067b38c9f +Author: Chris Wilson +Date: Fri Jun 10 15:29:57 2011 +0100 + + sna/dri: Actually restrict pageflipping to properly aligned fs windows + + Signed-off-by: Chris Wilson + +commit 9e9c628708ae838e5df3df89331243f84b297e8e +Author: Chris Wilson +Date: Fri Jun 10 15:17:18 2011 +0100 + + sna/dri: Create pixmap suitable for the framebuffer for fullscreen buffers + + Signed-off-by: Chris Wilson + +commit b22de0b01453884d5018e7e0faef439421fa63a0 +Author: Chris Wilson +Date: Fri Jun 10 13:30:54 2011 +0100 + + sna/blt: Suppress overwriting boxes through fill_boxes() + + As the introduction of the unrolled fill_boxes() was bypassing the + effective optimisation in fill_one(). + + Signed-off-by: Chris Wilson + +commit ebeebc2044610e6e31d9cef746c768d2e435f32c +Author: Chris Wilson +Date: Fri Jun 10 13:07:13 2011 +0100 + + sna: Use temporary for storing the current crtc box when computing best crtc + + ... as the caller may be reusing an input parameter for the result. + + Signed-off-by: Chris Wilson + +commit b3949d0d7424242703c9e60e2e33908499aa6a43 +Author: Chris Wilson +Date: Fri Jun 10 12:45:24 2011 +0100 + + sna/kgem: remove erroneous assert during submit + + This was only valid for gen6+ with the multiple rings. + + Signed-off-by: Chris Wilson + +commit 33abb68da2c49081f28898f93cc4e14702b40d70 +Author: Chris Wilson +Date: Fri Jun 10 12:44:56 2011 +0100 + + sna/kgem: remove redundant clears upon initialisation + + Signed-off-by: Chris Wilson + +commit cfde920a2e449efaa387850173e46f87d928023b +Author: Chris Wilson +Date: Fri Jun 10 11:27:04 2011 +0100 + + sna: Remember to decouple the fb on closing + + ... so that we actually attach a new one after regen! + + Signed-off-by: Chris Wilson + +commit b6192ce95af8aa8be6d9a68a500393f2a73c2f4c +Author: Chris Wilson +Date: Fri Jun 10 11:05:41 2011 +0100 + + sna/gen4: Tweak calculation of required batch space for CA + + Signed-off-by: Chris Wilson + +commit c9b89fc87f1d43a715cd9c5915bfed957175986d +Author: Chris Wilson +Date: Fri Jun 10 10:53:29 2011 +0100 + + sna: Drain the event queues before CloseScreen + + Signed-off-by: Chris Wilson + +commit ea560e25dfcce3750339b477a1a3c05f504cf91e +Author: Chris Wilson +Date: Fri Jun 10 10:44:27 2011 +0100 + + sna: Workaround the random free of the ScreenPixmap in fbCloseScreen + + Signed-off-by: Chris Wilson + +commit 1f364c6d241e8971e8fc1447871c718240e4563e +Author: Chris Wilson +Date: Fri Jun 10 10:03:01 2011 +0100 + + sna: Reset the kgem state on server regen + + Signed-off-by: Chris Wilson + +commit 95ae39a93467655b2107b82bd7970f732c8de066 +Author: Chris Wilson +Date: Fri Jun 10 09:57:22 2011 +0100 + + sna: Add some debug statements to the core DDX interface + + Signed-off-by: Chris Wilson + +commit 0594724dc4e9e459240b8b290ddf42ed711be22b +Author: Chris Wilson +Date: Fri Jun 10 08:18:07 2011 +0100 + + sna/gen4: Restore normal state after CA pass and FLUSH_EVERY_VERTEX + + By working around the broken shaders, we emitted the CA rectangle in the + middle of a sequence of glyphs and left the state setup for CA. So we + need to reset the pipeline state at the start of every composite blt. + + Signed-off-by: Chris Wilson + +commit 2dff681efe1b89ffe59e5d33979c6e059b72a786 +Author: Chris Wilson +Date: Fri Jun 10 08:23:19 2011 +0100 + + sna/blt: Remove a couple of unused members from its op-state + + Signed-off-by: Chris Wilson + +commit fbbd1c9dde3b2fafd8aaebb88daf3c546d86e5a4 +Author: Chris Wilson +Date: Fri Jun 10 08:22:00 2011 +0100 + + sna/glyphs: Fix glyphs to dst fallback path + +commit 3f46c34d534e389f541b5c7987b78981c556d868 +Author: Chris Wilson +Date: Fri Jun 10 08:20:12 2011 +0100 + + sna/composite: Tweak setup for the minimal composite extents + + Clip the operation extents before passing to the backend to setup the + operation, so that we only need to upload the minimum amount of data + necessary, or avoid tiling etc. + + Signed-off-by: Chris Wilson + +commit a34caf1e3ded03dca53bbea3432dcd45101460fd +Author: Chris Wilson +Date: Thu Jun 9 20:45:18 2011 +0100 + + sna/gradient: Check solid busy status not current domain + + We can write into the bo if it has no outstanding requests, whereas we + were checking to see it was last on the gpu instead. + + Signed-off-by: Chris Wilson + +commit 1638a0a6c0b335dd31def93a9199f7407ae51170 +Author: Chris Wilson +Date: Thu Jun 9 16:00:30 2011 +0100 + + sna/dri: Add a comment to warn about a potential race between DRI clients + + Signed-off-by: Chris Wilson + +commit 4b54c89fbddc7aa72e5f2c5eded44e84bce70b77 +Author: Chris Wilson +Date: Thu Jun 9 15:53:11 2011 +0100 + + sna: Place the pixmap on the DRI dirty list after damaging the shadow copy + + In order that we remember to flush the contents back to the GPU + before we wake up the DRI clients, we need to add those dirty + pixmaps to the flushing list. I caught the obvious place, the + central move-to-cpu, but I missed a couple of paths were we + optimise the copy onto the shadow. + + Signed-off-by: Chris Wilson + +commit 190a6786563aadd69f63bb7b509f3edf712e81ef +Author: Chris Wilson +Date: Thu Jun 9 15:13:17 2011 +0100 + + sna: Periodically reduce the gpu damage (after migrating any cpu damage) + + This will prevent the gpu damage list from growing unbounded. + + Signed-off-by: Chris Wilson + +commit 38d084ee6241527193ba08c6600b6734e1833118 +Author: Chris Wilson +Date: Thu Jun 9 14:53:34 2011 +0100 + + sna: Move !kgem->wedged check down into kgem_can_create_2d + + Signed-off-by: Chris Wilson + +commit d1a3bb1467429310f5d17bf6afbf2eeb043ae64d +Author: Chris Wilson +Date: Thu Jun 9 14:51:49 2011 +0100 + + sna: Prefer inactive buffers when creating a bo for a dirty pixmap + + As we will immediately attempt to replace it with an inactive when + moving the data to the GPU, short-circuit that replacement. + + Signed-off-by: Chris Wilson + +commit 8ee53cc7449de7df294f49d089ff1d6b2e944323 +Author: Chris Wilson +Date: Thu Jun 9 13:05:19 2011 +0100 + + sna: Debugging compile fix + + Still not enough coffee this morning. + + Signed-off-by: Chris Wilson + +commit 6f59d7d19053fed4e9d6402a5f03bc8a62cb56af +Author: Chris Wilson +Date: Thu Jun 9 12:59:59 2011 +0100 + + sna: Use --enable-debug=full to enable extremely verbose debugging + + Signed-off-by: Chris Wilson + +commit 021209d5d3add8b28143611cfad4c5481a2945a3 +Author: Chris Wilson +Date: Thu Jun 9 10:27:12 2011 +0100 + + sna: Remove the stubs from sna_render.c + + These only existed to work around an include order problem, when kgem + was intended to be entirely separable from sna. Moving the function + pointer into kgem simplifies matters. + + Signed-off-by: Chris Wilson + +commit 6141b1aea159759e7e9dcf2561deb9d8c02bd0a2 +Author: Chris Wilson +Date: Thu Jun 9 10:06:08 2011 +0100 + + sna: Warn after detecting a hung GPU + + ...and include the instructional error message from uxa. + + Signed-off-by: Chris Wilson + +commit 1786d2ee03a190ebe242ac7b58bed7cc31d66b16 +Author: Chris Wilson +Date: Thu Jun 9 09:48:57 2011 +0100 + + sna/accel: Add debug messages for falling back due to a wedged GPU + + Signed-off-by: Chris Wilson + +commit 4d509d501b09f565fea232947e6f53d54a08749f +Author: Chris Wilson +Date: Thu Jun 9 01:03:16 2011 +0100 + + sna: Tweak retiring old bo + + As we check for retirement everytime we wakeup, it is seldom useful to + check again until we know we have invoked an operation that may block. + But when we do check, we do not want to scan the entire active list + looking for flushing candidates, so track those on a separate list. + + Signed-off-by: Chris Wilson + +commit 17be5e2eb41b2ada94954b87c855961003c2fc7c +Author: Chris Wilson +Date: Thu Jun 9 00:38:29 2011 +0100 + + sna: Reduce the frequency of the timer interrupts + + Signed-off-by: Chris Wilson + +commit d0b09f10242e09adfddbbe6ee1ea39dbf5d1b32d +Author: Chris Wilson +Date: Wed Jun 8 20:34:57 2011 +0100 + + sna: Make the device fd non-blocking + + So that we can simply query it from each of the Zaphod instances without + blocking. Requires a fixed kernel... + + Signed-off-by: Chris Wilson + +commit 67ed14c5369cfd967f90e5a3e6053c95a48dd16e +Author: Chris Wilson +Date: Wed Jun 8 19:42:02 2011 +0100 + + sna/dri: Set bo=NULL to actually detect unknown dri attachment points. + + Signed-off-by: Chris Wilson + +commit 68755bc5ff830dc5ed6a34b18a1217b7d1003ce4 +Author: Chad Versace +Date: Wed Jun 8 18:34:02 2011 +0100 + + sna/dri: Add support for DRI2BufferStencil and DRI2BufferHiz + + Based on Chad's commits 2662db5b and 3daba7e6: + + Signed-off-by: Chris Wilson + +commit 0030c3aab6172cdb83ca8f1b7b07c7db5915990d +Author: Chris Wilson +Date: Wed Jun 8 18:31:12 2011 +0100 + + sna/dri: Drop support for old dri2 versions with incompatible ABI + + Signed-off-by: Chris Wilson + +commit 715d466ad44e82b740f5454c41db944863420596 +Author: Chris Wilson +Date: Wed Jun 8 13:32:59 2011 +0100 + + sna/dri: valgrindify + + Lots of scary warnings found by valgrind. + + Signed-off-by: Chris Wilson + +commit a62db5b050dee10246c02c72385358acb5e72b56 +Author: Chad Versace +Date: Mon May 23 14:23:54 2011 -0700 + + dri: Add support for DRI2BufferStencil and DRI2BufferHiz + + And bump configure.ac to require dri2proto >= 2.6, because + DRI2BufferStencil and DRI2BufferHiz were introduced in that version. + + When a client requests DRI2BufferHiz or DRI2BufferStencil, + I830DRI2CreateBuffer() now returns a Y-tiled buffer. The stencil buffer is + handled as a special case due its quirky pitch requirements. + + CC: Eric Anholt + CC: Ian Romanick + CC: Kristian Høgsberg + Signed-off-by: Chad Versace + +commit 263daba7e6afb37bd471fdc8dd8e4458da0a45ff +Author: Chad Versace +Date: Sun Jun 5 19:48:19 2011 -0700 + + dri: Do not create DRI2 buffers for unrecognized DRI2 buffer tokens + + Before this commit, if a client were to request an unrecognized DRI2 + buffer, such as DRI2BufferStencil, then I830DRI2CreateBuffer() allocated + and returned an X-tiled buffer by accident. The problem was that + unrecognized tokens were caught by the default case of a switch statement. + + Now, when given unrecognized DRI2 tokens, I830DRI2CreateBuffers() returns + null. + + This shouldn't break older Mesa versions, because they never query (via + DRI2GetBuffersWithFormat) for the drawable's DRI2BufferStencil. + + CC: Eric Anholt + CC: Ian Romanick + CC: Kenneth Graunke + CC: Kristian Høgsberg + +commit 038f29c259c1463c0bff12f5f8f0b228c02e45b3 +Author: Chris Wilson +Date: Tue Jun 7 19:16:01 2011 +0100 + + sna/blt: Flush batch before overwrite surface data + + A left-over from before the surface was embedded into the tail of the + batch, we were only checking for room against the total size of the + batch buffer. So under the wrong set of circumstances we ended up + overwriting surface data with batch and triggering a GPU hang on gen4+. + + Signed-off-by: Chris Wilson + +commit 265d94e0aa46b30a3198893544dd3619cc9145de +Author: Chris Wilson +Date: Tue Jun 7 14:23:51 2011 +0100 + + sna: Add zaphod support + + Zaphod support is a rudimentary method for creating an Xserver with + multiple screens from a single device. The Device is instantiated, with + a duplication of its resources, as many as required up to a maximum of + the number of its outputs, and each instance is attached to a Screen + and added to the ServerLayout. A Device can be bound to a selection of + outputs using a comma separated list of RandR names. + + Note: in general, this is not the preferred solution! And will be + superseded by per-crtc-pixmaps in RandR-1.4. + + For example, the following xorg.conf fragment creates an XServer with + two screens, one attached to the LVDS panel on the laptop, and the other + to any external output: + + Section "Device" + Identifier "Intel0" + Driver "intel" + BusID "PCI:0:2:0" + Option "ZaphodHeads" "LVDS1" + Screen 0 + EndSection + + Section "Device" + Identifier "Intel1" + Driver "intel" + BusID "PCI:0:2:0" + Option "ZaphodHeads" "DVI1,VGA1" + Screen 1 + EndSection + + Section "Screen" + Identifier "Screen0" + Device "Intel0" + EndSection + + Section "Screen" + Identifier "Screen1" + Device "Intel1" + EndSection + + Section "ServerLayout" + Identifier "default" + Screen "Screen0" + Screen "Screen1" + EndSection + + Based on a patch by Ben Skegs + + Signed-off-by: Chris Wilson + +commit ad5ead8257b7dda84a886461873d87831d43e663 +Author: Chris Wilson +Date: Tue Jun 7 11:06:52 2011 +0100 + + sna/gen2: Support covered xrgb sources on 830/845 + + 830/845 cannot directly sample from an x8r8g8b8 source, but if we know + that we are only sampling from within the confines of the source then we + force the alpha channel to one. (Outside of the source we require the + sampler to return a==0.) + + Signed-off-by: Chris Wilson + +commit 790f90a277ff2a6fbb615b8cd3c06faa0d549c41 +Author: Chris Wilson +Date: Tue Jun 7 08:18:30 2011 +0100 + + sna/gen6: Initialise a couple more composite op members for copy_boxes + + Valgrind detected that I missed initialised a couple of fields for + use with the generic state emission paths: + + ==28683== Conditional jump or move depends on uninitialised value(s) + ==28683== at 0x83BE646: gen6_get_blend (gen6_render.c:251) + ==28683== by 0x83BF769: gen6_emit_state (gen6_render.c:818) + ==28683== by 0x83C38ED: gen6_emit_copy_state (gen6_render.c:2280) + ==28683== by 0x83C3C89: gen6_render_copy_boxes (gen6_render.c:2356) + ==28683== Conditional jump or move depends on uninitialised value(s) + ==28683== at 0x83C15C3: gen6_rectangle_begin (gen6_render.c:1458) + ==28683== by 0x83C177D: gen6_get_rectangles (gen6_render.c:1502) + ==28683== by 0x83C3D16: gen6_render_copy_boxes (gen6_render.c:2363) + + Signed-off-by: Chris Wilson + +commit 4e443cbef589e016d085e8023677f47c1f01a858 +Author: Chris Wilson +Date: Tue Jun 7 00:24:17 2011 +0100 + + sna: Add some more debug commentary to render picture source migration + + Signed-off-by: Chris Wilson + +commit 367298c5109b47fa4961a60fa3cb454c800f02c3 +Author: Chris Wilson +Date: Mon Jun 6 23:21:09 2011 +0100 + + sna: Subtract the Solid RenderFillRectangles from CPU damage + + ... and so avoid having to move it the GPU, as seen in the wild. It + looks like I will actually need to handle mixed Render/Core operations + on the frontbuffer. + + Signed-off-by: Chris Wilson + +commit 62e4266b4dc9b5c3d165aca980738fa777a0f259 +Author: Chris Wilson +Date: Mon Jun 6 16:20:38 2011 +0100 + + sna/gen5: Only emit the non-pipelined op after BLT commands + + We were always terminating the batch with the non-pipelined op, and not + just at the end of a BLT sequence. + + Signed-off-by: Chris Wilson + +commit 8f97157d2e807d6c9acb521ec59757f419e6518b +Author: Chris Wilson +Date: Mon Jun 6 10:21:17 2011 +0100 + + sna/gen2: Replicate alpha for non-CA masks + + Signed-off-by: Chris Wilson + +commit c8a2fa3a2e3f22e12f363e8ea060c70585156190 +Author: Chris Wilson +Date: Mon Jun 6 08:43:34 2011 +0100 + + sna/gen2: Correct command length for CA LOAD_IMMEDIATE_STATE_1 + + Signed-off-by: Chris Wilson + +commit a89fc7181b6ccec8ccca2cd4ccab4f180f663656 +Author: Chris Wilson +Date: Mon Jun 6 08:39:17 2011 +0100 + + sna/gen2: Only emit the mask texcoord if there is a mask + + Signed-off-by: Chris Wilson + +commit 4fb7784e1e1b2b999c0c2420583e9c48eb1127ac +Author: Chris Wilson +Date: Mon Jun 6 08:27:17 2011 +0100 + + sna/gen3: Non-affine texcoords require space for 4 floats not 3. + + Signed-off-by: Chris Wilson + +commit d9344ab8d04fe4795a3a532c5c0e85dc11ecf968 +Author: Chris Wilson +Date: Mon Jun 6 08:25:53 2011 +0100 + + sna/gen2: Set op->floats_per_vertex + + Signed-off-by: Chris Wilson + +commit 741c1101f17bfa379a15178e4760211737fa18cf +Author: Chris Wilson +Date: Mon Jun 6 08:22:45 2011 +0100 + + sna/gen2: Enable selection of gen2 only + + Signed-off-by: Chris Wilson + +commit c76ec69660bf40de052159f60c16de8fd87341a8 +Author: Chris Wilson +Date: Mon Jun 6 08:02:09 2011 +0100 + + sna/gen2: The inline primitive takes a length, not a vertex count + + Signed-off-by: Chris Wilson + +commit 91424d49373d8117e71441fa3221bd1801171692 +Author: Eric Anholt +Date: Tue May 31 23:29:43 2011 -0700 + + uxa: Simplify uxa_poly_fill_rect by only clipping once. + + Reviewed-by: Keith Packard + +commit e0066e77e026b0dd0daa0c3765473c7d63aa6753 +Author: Eric Anholt +Date: Tue May 31 23:17:16 2011 -0700 + + uxa: Simplify Composite solid acceleration for spans by only clipping once. + + Unlike the previous commit removing this style of code, the code in + this one was originally wrong, and would fail to clip in the second + pass of clipping when y was > pbox->y2. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37233 + Reviewed-by: Keith Packard + +commit ace324e4aa27effdd621156eec03f3f87b610732 +Author: Eric Anholt +Date: Tue May 31 23:13:18 2011 -0700 + + uxa: Simplify BLT solid acceleration for spans filling by only clipping once. + + We were clipping each span against the bounds of the clip, throwing + out the span early if it was all clipped, and then walked the clip box + clipping against each of the cliprects. We would expect spans to + typically be clipped against one box, and not thrown out, so we were + not saving any work there. For multiple cliprects, we were adding + work. Only for many spans clipped entirely out of a complicated clip + region would it have saved work, and it clearly didn't save bugs as + evidenced by the many fix attempts here. + + Reviewed-by: Keith Packard + +commit bdb396a44bf64f823a44aafee19b5ec692f1bf5f +Author: Chris Wilson +Date: Sun Jun 5 19:41:25 2011 +0100 + + sna: PutImage: Copy straight to GTT if the bo is idle + + This saves a copy in the typical PutImage to frontbuffer favoured by + flash. And we also happen to fix a bug if we should be requested to + PutImage outside of the clip region... + + Signed-off-by: Chris Wilson + +commit 407257570fea1c6456fda47c9fab36c39f169c2b +Author: Chris Wilson +Date: Sun Jun 5 15:33:27 2011 +0100 + + sna/gen6: Flush the pipeline before effecting a change of blend modes + + ... also make sure that we flush if we change the blend mode for the CA pass. + + Reported-by: Ivan Bulatovic + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37946 + Signed-off-by: Chris Wilson + +commit 73167711226f430cc9ef4c27f267655d0edf4622 +Author: Chris Wilson +Date: Sun Jun 5 14:56:32 2011 +0100 + + sna: 915gm does not have 128-byte Y-tiling + + Signed-off-by: Chris Wilson + +commit 0260c4ce32fa4d7ae8c6ee79d5488b0114e96251 +Author: Chris Wilson +Date: Sun Jun 5 14:39:34 2011 +0100 + + sna: Fallback if presented with mask under NO_COMPOSITE + + Just making sure that the debug paths actually work... + + Signed-off-by: Chris Wilson + +commit fcbe2d9ee79c936cad3ee86836286dcb280f0047 +Author: Chris Wilson +Date: Sat Jun 4 18:11:54 2011 +0100 + + sna/gen4: Flush every vertex for the magic CA pass + + gen4 dies hard if it has two rectangles in the pipeline, and despite the + stringent and crippling efforts to prevent us from efficiently using the + GPU, I missed a flush before submitting the CA rectangle. + + Reported-and-tested-by: Fryderyk Dziarmagowski + References: https://bugs.freedesktop.org/show_bug.cgi?id=28768 + Signed-off-by: Chris Wilson + +commit bcef98af561939aa48d9236b2dfa2c5626adf4cb +Author: Chris Wilson +Date: Fri Apr 8 07:17:14 2011 +0100 + + sna: Introduce a new acceleration model. + + The premise is that switching between rings (i.e. the BLT and + RENDER rings) on SandyBridge imposes a large latency overhead whilst + rendering. The cause is that in order to switch rings, we need to split + the batch earlier than is desired and to add serialisation between the + rings. Both of which incur large overhead. + + By switching to using a pure 3D blit engine (ok, not so pure as the BLT + engine still has uses for the core drawing model which can not be easily + represented without a combinatorial explosion of shaders) we can take + advantage of additional efficiencies, such as relative relocations, that + have been incorporated into recent hardware advances. However, even + older hardware performs better from avoiding the implicit context + switches and from the batching efficiency of the 3D pipeline... + + But this is X, and PolyGlyphBlt still exists and remains in use. So for + the operations that are not worth accelerating in hardware, we introduce a + shadow buffer mechanism through out and reintroduce pixmap migration. + Doing this efficiently is the cornerstone of ensuring that we do exploit + the increased potential of recent hardware for running old applications and + environments (i.e. so that the latest and greatest chip is actually faster + than gen2!) + + For the curious, sna is SandyBridge's New Acceleration. If you are + running older chipsets and welcome the performance increase offered by + this patch, then you may choose to call it Snazzy instead. + + Speedups + ======== + gen3 firefox-fishtank 1203584.56 (1203842.75 0.01%) -> 85561.71 (125146.44 14.87%): 14.07x speedup + gen5 grads-heat-map 3385.42 (3489.73 1.44%) -> 350.29 (350.75 0.18%): 9.66x speedup + gen3 xfce4-terminal-a1 4179.02 (4180.09 0.06%) -> 503.90 (531.88 4.48%): 8.29x speedup + gen4 grads-heat-map 2458.66 (2826.34 4.64%) -> 348.82 (349.20 0.29%): 7.05x speedup + gen3 grads-heat-map 1443.33 (1445.32 0.09%) -> 298.55 (298.76 0.05%): 4.83x speedup + gen3 swfdec-youtube 3836.14 (3894.14 0.95%) -> 889.84 (979.56 5.99%): 4.31x speedup + gen6 grads-heat-map 742.11 (744.44 0.15%) -> 172.51 (172.93 0.20%): 4.30x speedup + gen3 firefox-talos-svg 71740.44 (72370.13 0.59%) -> 21959.29 (21995.09 0.68%): 3.27x speedup + gen5 gvim 8045.51 (8071.47 0.17%) -> 2589.38 (3246.78 10.74%): 3.11x speedup + gen6 poppler 3800.78 (3817.92 0.24%) -> 1227.36 (1230.12 0.30%): 3.10x speedup + gen6 gnome-terminal-vim 9106.84 (9111.56 0.03%) -> 3459.49 (3478.52 0.25%): 2.63x speedup + gen5 midori-zoomed 9564.53 (9586.58 0.17%) -> 3677.73 (3837.02 2.02%): 2.60x speedup + gen5 gnome-terminal-vim 38167.25 (38215.82 0.08%) -> 14901.09 (14902.28 0.01%): 2.56x speedup + gen5 poppler 13575.66 (13605.04 0.16%) -> 5554.27 (5555.84 0.01%): 2.44x speedup + gen5 swfdec-giant-steps 8941.61 (8988.72 0.52%) -> 3851.98 (3871.01 0.93%): 2.32x speedup + gen5 xfce4-terminal-a1 18956.60 (18986.90 0.07%) -> 8362.75 (8365.70 0.01%): 2.27x speedup + gen5 firefox-fishtank 88750.31 (88858.23 0.14%) -> 39164.57 (39835.54 0.80%): 2.27x speedup + gen3 midori-zoomed 2392.13 (2397.82 0.14%) -> 1109.96 (1303.10 30.35%): 2.16x speedup + gen6 gvim 2510.34 (2513.34 0.20%) -> 1200.76 (1204.30 0.22%): 2.09x speedup + gen5 firefox-planet-gnome 40478.16 (40565.68 0.09%) -> 19606.22 (19648.79 0.16%): 2.06x speedup + gen5 gnome-system-monitor 10344.47 (10385.62 0.29%) -> 5136.69 (5256.85 1.15%): 2.01x speedup + gen3 poppler 2595.23 (2603.10 0.17%) -> 1297.56 (1302.42 0.61%): 2.00x speedup + gen6 firefox-talos-gfx 7184.03 (7194.97 0.13%) -> 3806.31 (3811.66 0.06%): 1.89x speedup + gen5 evolution 8739.25 (8766.12 0.27%) -> 4817.54 (5050.96 1.54%): 1.81x speedup + gen3 evolution 1684.06 (1696.88 0.35%) -> 1004.99 (1008.55 0.85%): 1.68x speedup + gen3 gnome-terminal-vim 4285.13 (4287.68 0.04%) -> 2715.97 (3202.17 13.52%): 1.58x speedup + gen5 swfdec-youtube 5843.94 (5951.07 0.91%) -> 3810.86 (3826.04 1.32%): 1.53x speedup + gen4 poppler 7496.72 (7558.83 0.58%) -> 5125.08 (5247.65 1.44%): 1.46x speedup + gen4 gnome-terminal-vim 21126.24 (21292.08 0.85%) -> 14590.25 (15066.33 1.80%): 1.45x speedup + gen5 firefox-talos-svg 99873.69 (100300.95 0.37%) -> 70745.66 (70818.86 0.05%): 1.41x speedup + gen4 firefox-planet-gnome 28205.10 (28304.45 0.27%) -> 19996.11 (20081.44 0.56%): 1.41x speedup + gen5 firefox-talos-gfx 93070.85 (93194.72 0.10%) -> 67687.93 (70374.37 1.30%): 1.37x speedup + gen4 evolution 6696.25 (6854.14 0.85%) -> 4958.62 (5027.73 0.85%): 1.35x speedup + gen3 swfdec-giant-steps 2538.03 (2539.30 0.04%) -> 1895.71 (2050.62 62.43%): 1.34x speedup + gen4 gvim 4356.18 (4422.78 0.70%) -> 3276.31 (3281.69 0.13%): 1.33x speedup + gen6 evolution 1242.13 (1245.44 0.72%) -> 953.76 (954.54 0.07%): 1.30x speedup + gen6 firefox-planet-gnome 4554.23 (4560.69 0.08%) -> 3758.76 (3768.97 0.28%): 1.21x speedup + gen3 firefox-talos-gfx 6264.13 (6284.65 0.30%) -> 5261.56 (5370.87 1.28%): 1.19x speedup + gen4 midori-zoomed 4771.13 (4809.90 0.73%) -> 4037.03 (4118.93 0.85%): 1.18x speedup + gen6 swfdec-giant-steps 1557.06 (1560.13 0.12%) -> 1336.34 (1341.29 0.32%): 1.17x speedup + gen4 firefox-talos-gfx 80767.28 (80986.31 0.17%) -> 69629.08 (69721.71 0.06%): 1.16x speedup + gen6 midori-zoomed 1463.70 (1463.76 0.08%) -> 1331.45 (1336.56 0.22%): 1.10x speedup + Slowdowns + ========= + gen6 xfce4-terminal-a1 2030.25 (2036.23 0.25%) -> 2144.60 (2240.31 4.29%): 1.06x slowdown + gen4 swfdec-youtube 3580.00 (3597.23 3.92%) -> 3826.90 (3862.24 0.91%): 1.07x slowdown + gen4 firefox-talos-svg 66112.25 (66256.51 0.11%) -> 71433.40 (71584.31 0.14%): 1.08x slowdown + gen4 gnome-system-monitor 5691.60 (5724.03 0.56%) -> 6707.56 (6747.83 0.33%): 1.18x slowdown + gen3 ocitysmap 3494.05 (3502.44 0.20%) -> 4321.99 (4524.42 2.78%): 1.24x slowdown + gen4 ocitysmap 3628.42 (3641.66 9.37%) -> 5177.16 (5828.74 8.38%): 1.43x slowdown + gen5 ocitysmap 4027.77 (4068.11 0.80%) -> 5748.26 (6282.25 7.38%): 1.43x slowdown + gen6 ocitysmap 1401.61 (1402.24 0.40%) -> 2365.74 (2379.14 4.12%): 1.69x slowdown + + [Note the performance regression for ocitysmap comes from that we now + attempt to support rendering to and (more importantly) from large + surfaces. By enabling such operations is the only way to one day be + faster than purely using the CPU, in the meantime we suffer regression + due to the increased migration and aperture thrashing. The other couple + of regressions will be eliminated with improved span and shader support, + now that the framework for such is in place.] + + The performance increase for Cairo completely overlooks the other + critical aspects of the architecture: + + World of Padman: + gen3 (800x600): 57.5 -> 96.2 + gen4 (800x600): 47.8 -> 74.6 + gen6 (1366x768): 100.4 -> 140.3 [F15] + 144.3 -> 146.4 [drm-intel-next] + + x11perf (gen6); + aa10text: 3.47 -> 14.3 Mglyphs/s [unthrottled!] + copywinwin10: 1.66 -> 1.99 Mops/s + copywinpix10: 2.28 -> 2.98 Mops/s + + And we do not have a good measure for how much improvement the reworking + of the fallback paths give, except that xterm is now over 4x faster... + + PS: This depends upon the Xorg patchset "Remove the cacheing of the last + scratch PixmapRec" for correct invalidations of scratch Pixmaps (used by + the dix to implement SHM operations, used by chromium and gtk+ pixbufs. + + PPS: ./configure --enable-sna + + Signed-off-by: Chris Wilson + +commit 340cfb7f5271fd1df4c8948e5c9336f5b69a6e6c +Author: Diego Elio Pettenò +Date: Sun May 15 02:17:32 2011 +0200 + + build: do not use AC_CHECK_FILE to find the header files. + + Using AC_CHECK_FILE will cause cross-builds to fail picking the right file; + instead use compile/preprocessor checks properly, and check for + xf86driproto earlier. + + Reviewed-by: Rémi Cardona + Signed-off-by: Chris Wilson + +commit 9d6e02a135efdea1d169d1938359ab2b553e941c +Author: Adam Jackson +Date: Tue May 10 15:27:45 2011 -0400 + + Remove the memory of Option "AccelMethod" + + Signed-off-by: Adam Jackson + Reviewed-by: Eric Anholt + Signed-off-by: Chris Wilson + +commit 895a46e8ff70195c1a4bdccbeb652e330376f64a +Author: Chris Wilson +Date: Tue May 10 20:38:25 2011 +0100 + + dri: Flush the batch after a DRI swap/copy event + + To minimise lag in those every so critical games, we want to ensure that + the copy happens as soon as it is received, so we need to flush the + batch after processing a swap event and before we go to sleep. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=37068 + Signed-off-by: Chris Wilson + +commit 0b4ca9313cc7eb4845cf7f4e87c869c0c6d6ff0d +Author: Chris Wilson +Date: Tue May 10 20:36:10 2011 +0100 + + video: Flush the batch on the next blockhandler after queuing + + In order to avoid video lag and jerky playback we need to ensure that + any queued video is flushed before we go to sleep. + + Fixes regression from 6f104189bb. + + Reported-and-tested-by: Edward Sheldrake + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37068 + Signed-off-by: Chris Wilson + +commit bb8bf2a28bcb5e838bf4bb7e80ce220d28540719 +Author: Chris Wilson +Date: Tue May 10 14:35:02 2011 +0100 + + Correct chipset detection for Q33, Q35, B43_G1 + + Everytime we update these tables we trip over this bit of marketing + genius. + + Signed-off-by: Chris Wilson + +commit fd1ebd44fb72e7bdf57d00f8941cd6110a529cac +Author: Chris Wilson +Date: Tue May 10 07:30:58 2011 +0100 + + module: Adopt IVB's more detailed naming convention for SNB + + This should fix the seven-fold repetition of "SandyBridge" in the list + of supported chipsets during start-up... And be more useful in bug + reports! + + Signed-off-by: Chris Wilson + +commit e9811bb777dfc51af19836175645400489f7d991 +Author: Chris Wilson +Date: Tue May 10 07:28:23 2011 +0100 + + Whitespacing cleanup for intel_module.c + + Bring intel_module.c into line with the kernel whitespacing rules abided + by everywhere else in the tree. + + Signed-off-by: Chris Wilson + +commit 79e59fb2a047b1e733a7b0dee608db3311391725 +Author: Eric Anholt +Date: Fri May 6 12:40:12 2011 -0700 + + Add support for Ivybridge chipset. + + This gets display and 2D blit acceleration up and running. No Render + acceleration is provided yet. + +commit 792738adfc5164d30358f045875dfc9b199a46da +Author: Eric Anholt +Date: Fri May 6 13:14:25 2011 -0700 + + Remove the static list of PciChipset and construct it from SymTabRec instead. + + This is one less place the new hardware enabler has to spam the + chipset in. The PciChipset is just a match structure from PciId to + the SymTabRec entry token, and our SymTabRec entry tokens are just the + PciId, so it's trivial to construct. + + Acked-by: Kenneth Graunke + +commit 583e80dfa12d6c73fc677c81cb605a07b2768979 +Author: Eric Anholt +Date: Fri May 6 13:00:53 2011 -0700 + + Use the existing deviceID -> name mapping in SymTabRec instead of duping it. + + We need to have this array anyway for the xf86 interfaces, apparently, + so just store the name in one location. This drops the i852/i855 + subdevice distinction in the name printed, but I haven't seen us ever + care about that. + + Acked-by: Kenneth Graunke + +commit adf7bbd3a8758de6cdecbace42e399dd27188497 +Author: Eric Anholt +Date: Fri May 6 12:56:53 2011 -0700 + + Store the chipset info struct in the PCI match struct, instead of a switch(). + + Acked-by: Kenneth Graunke + +commit 3145530feed879082bcfab11ffc8e7fd0911c920 +Author: Chris Wilson +Date: Sat May 7 19:51:04 2011 +0100 + + Ensure that the partial batch is flushed upon the blockhandler + + Currently, we require that a batch containing a dirty bo be submitted + before we mark the device as requiring a flush. So if we never submit a + batch between block handlers, we can end up sleeping without ever + flushing either the partial batch or the rendering to the scanout. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36776 + Tested-by: Vasily Khoruzhick + Signed-off-by: Chris Wilson + +commit 67e5a74e997f199327f9115c7ba867df3c49da8d +Author: Paul Menzel +Date: Fri Apr 22 15:09:12 2011 +0200 + + NEWS: fix typo (s/2.14/2.15/) to match corresponding release + + Signed-off-by: Paul Menzel + Signed-off-by: Chris Wilson + +commit 0944e2d5749f5122cd9802c4a2421106fa829ea4 +Author: Jesse Barnes +Date: Wed Apr 20 11:39:55 2011 -0700 + + Add basic 30 bit depth support + + Still need to handle video and gamma correction, but this gets the + display up and running at 30 bit depth if the kernel and display support + it. + + Signed-off-by: Jesse Barnes + +commit 1d102cc6ed21d1c4afa47800eecd24b9d663f689 +Author: Chris Wilson +Date: Tue Apr 12 13:48:38 2011 +0100 + + Use SwapbuffersWait config option to control waiting on fullscreen swaps + + As fullscreen swaps were going via a different path to the swapping of + ordinary windows, we were no longer honouring the xorg.conf option to + disable swapbuffer waiting. + + This changes the code to only use pageflipping if the Option + "SwapbuffersWait" is set to "TRUE" (default). + + Jesse's comment was that this should be superseded by actually + supporting asynchronous page flips. As we are missing kernel and dix level + support for that, in the meantime honour the config option. + + Signed-off-by: Chris Wilson + Cc: Jesse Barnes + Cc: Kristian Høgsberg + +commit c9fb69cb2502917dfb2828c90802de7766072899 +Author: Chris Wilson +Date: Sun Apr 17 10:42:05 2011 +0100 + + i965/video: We need 150 dwords of space for video state emission + + (Actually around 131, with additional 10% just for safety.) + + Reported-by: Modestas Vainius + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36319 + Signed-off-by: Chris Wilson + +commit a51cd83d25f2f9f2107219d5671194f931601244 +Author: Chris Wilson +Date: Sun Apr 17 10:36:26 2011 +0100 + + intel: Beware the unsigned promotion when checking for batch overflows + + Reported-by: Modestas Vainius + References: https://bugs.freedesktop.org/show_bug.cgi?id=36319 + Signed-off-by: Chris Wilson + +commit 030aa3d13643a0acb7126fa1fa6c5a8eac134639 +Author: Chris Wilson +Date: Thu Apr 14 10:25:21 2011 +0100 + + NEWS: typo. + + Spotted too late... + + Signed-off-by: Chris Wilson + +commit 0e425b30e12b11dbf51eea1d3366e3372f8b93af +Author: Chris Wilson +Date: Thu Apr 14 10:16:03 2011 +0100 + + configure,NEWS: 2.15.0 release + + Signed-off-by: Chris Wilson + +commit 686018f283f1d131073ef5917213e6a8ac013f26 +Author: Chris Wilson +Date: Tue Apr 12 08:23:04 2011 +0100 + + Turn relaxed-fencing off by default for older (pre-G33) chipsets + + There are still too many unresolved bugs, typically GPU hangs, that are + related to using relaxed fencing (i.e. only allocating the minimal + amount of memory required for a buffer) on older hardware, so turn off + the feature by default for the release. + + Reported-and-tested-by: Knut Petersen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36147 + Signed-off-by: Chris Wilson + Acked-by: Daniel Vetter + +commit 3d2b79098ccb3fed86be66f619f4ed338741d454 +Author: Chris Wilson +Date: Mon Apr 11 15:20:16 2011 +0100 + + dri: Rearrange code to compile against xorg-server-1.7 + + Signed-off-by: Chris Wilson + +commit 4fa35dd5e13a58070220f787fc0678f1c679808d +Author: Chris Wilson +Date: Mon Apr 11 10:44:55 2011 +0100 + + NEWS: version bump for 2.14.903 snapshot + + Signed-off-by: Chris Wilson + +commit 97e9557619e58ef769eb7cbf1a03fbd52be7f2ed +Author: Chris Wilson +Date: Fri Apr 8 13:38:48 2011 +0100 + + intel: Restore manual flush for old kernels + + Daniel Vetter pointed out that the automagic flush by the kernel for the + busy-ioctl was only introduced upstream in 2.6.37. So we still need to + manually emit a flush on old kernels. + + Signed-off-by: Chris Wilson + +commit fb40bf2b33a6d26f0e6a4e5798d10c905faa8aad +Author: Daniel Vetter +Date: Fri Apr 8 12:37:35 2011 +0200 + + Tell users to grab i915_error_state on gpu hangs + + Acked-by: Chris Wilson + Signed-off-by: Daniel Vetter + +commit 59ed6b05db99d7e5144f4f8499c67cee9b833673 +Author: Chris Wilson +Date: Thu Apr 7 15:28:46 2011 +0100 + + Revert "i965: Convert to relative relocations for state" + + This reverts commit d2106384be6f9df498392127c3ff64d0a2b17457. + + Breaks compiz (but not mutter/gnome-shell) on gen6. Not sure if this is + not seem deep interaction issue with multiple clients sharing the GPU or + just with compiz, but for now we have to revert and suffer the inane + performance hit. It looks suspiciously like another deferred damage + issue... + + Bugzilla: 51a27e88b073cff229fff4362cb6ac22835c4044 + Signed-off-by: Chris Wilson + +commit 25521900df11bc71020ee80db2223f979bec5ec6 +Author: Chris Wilson +Date: Thu Apr 7 15:09:30 2011 +0100 + + gen6: Invalidate texture cache + + Signed-off-by: Chris Wilson + +commit ad22003033eb502474ae538a97e3b42cf8f83880 +Author: Chris Wilson +Date: Thu Apr 7 10:29:40 2011 +0100 + + i965: Avoid transform overheads for vertex emit where possible + + Minor improvement as the bottlenecks lie elsewhere. But it was annoying me. + + Signed-off-by: Chris Wilson + +commit 007c2f86cbb386861a1f711786523657f92e12cb +Author: Chris Wilson +Date: Thu Apr 7 09:53:34 2011 +0100 + + i965: Refactor to use constant sampler_state offsets + + Signed-off-by: Chris Wilson + +commit 8dc99b305a514dcd42c4260698e685a66dc95518 +Author: Chris Wilson +Date: Mon Apr 4 22:30:29 2011 +0100 + + i965: Reset vertex_id after every batch + + So that we always remember to re-emit the initial vertex elements state. + + Signed-off-by: Chris Wilson + +commit 5982ed4da12a964351029c6f786348a11e33dc81 +Author: Chris Wilson +Date: Mon Apr 4 19:32:43 2011 +0100 + + i965: Always update last_floats_per_vertex + + Signed-off-by: Chris Wilson + +commit 6f104189bb9439ab0e05f04d4be020813eb04bf9 +Author: Chris Wilson +Date: Mon Apr 4 19:21:10 2011 +0100 + + Take advantage of the kernel flush for dirty bo in the busy ioctl + + Rather than just creating and submitting a batch that simply contains a + flush in order to periodically ensure that rendering reaches the + scanout, we can simply ask the kernel whether the scanout is busy. The + kernel will then submit a flush on our behalf if it is dirty, which + takes advantage of the kernel's dirty state tracking. + + Signed-off-by: Chris Wilson + +commit 314439860e595c473d168c0cafb2b5b49b7fef30 +Author: Chris Wilson +Date: Mon Apr 4 17:20:04 2011 +0100 + + Remove unused function 'intel_bo_alloc_for_data' + + Signed-off-by: Chris Wilson + +commit ced747cefb5e697e6caa65296dff728904f52b93 +Author: Chris Wilson +Date: Mon Apr 4 17:13:50 2011 +0100 + + Remove the unnecessary MI_FLUSH from the flush handler + + The kernel will emit any required flushes between the dri client and the + ddx, and we do not rely on the MI_FLUSH here for scanout. + + Signed-off-by: Chris Wilson + +commit 79444291a39c42039192a5baa3a71d52300cf4ee +Author: Chris Wilson +Date: Mon Apr 4 16:34:58 2011 +0100 + + i965: segregate each vertex element into its own buffer + + Reduce the number of relocations emitted by only emitting one relocation + per vertex element per vertex buffer. + + References: https://bugs.freedesktop.org/show_bug.cgi?id=35733 + Signed-off-by: Chris Wilson + +commit d2106384be6f9df498392127c3ff64d0a2b17457 +Author: Chris Wilson +Date: Mon Apr 4 12:33:04 2011 +0100 + + i965: Convert to relative relocations for state + + References: https://bugs.freedesktop.org/show_bug.cgi?id=35733 + Signed-off-by: Chris Wilson + +commit 972569f6fd1e14519f46e9f50d2509faf1d0aa55 +Author: Chris Wilson +Date: Fri Mar 25 10:46:14 2011 +0000 + + MI_LOAD_SCAN_LINES_INCL are inclusive and range [0, display height-1] + + We have seen GPU hangs with: + + batchbuffer at 0x0f9b4000: + 0x0f9b4000: 0x09000000: MI_LOAD_SCAN_LINES_INCL + 0x0f9b4004: 0x00000300: dword 1 + 0x0f9b4008: 0x09000000: MI_LOAD_SCAN_LINES_INCL + 0x0f9b400c: 0x00000300: dword 1 + 0x0f9b4010: 0x01820000: MI_WAIT_FOR_EVENT + 0x0f9b4014: HEAD 0x02000006: MI_FLUSH + + on a 1366x768 display. That according to the specs an invalid command + for the pipe. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35576 + Signed-off-by: Chris Wilson + +commit 537a836dd6db384d53b52eb457a7d257c440217f +Author: Chris Wilson +Date: Fri Apr 1 07:10:25 2011 +0100 + + 946GZ is a 965G! + + Sales & Marketing score another victory in confusing me. + + Bugzila: https://bugs.freedesktop.org/show_bug.cgi?id=35854 + Signed-off-by: Chris Wilson + +commit 630d77bf10ba6234bb9c04538636f7d8aa319aea +Author: Chris Wilson +Date: Wed Mar 30 07:24:42 2011 +0100 + + Add a DRI2SwapEventPtr typedef for retro xservers + + Because people are still trying to build upon our solid historical + foundations. + + Signed-off-by: Chris Wilson + +commit f660df2cb44b310740ed850037ff37891b671f28 +Author: Daniel Vetter +Date: Tue Mar 29 18:02:24 2011 +0200 + + Cleanup gen2 tiling confusion + + A tile on gen2 has a size of 2kb, stride of 128 bytes and 16 rows. + + Reviewed-by: Chris Wilson + Signed-off-by: Daniel Vetter + +commit a2c8442fcb29ef2d0df41518952a2d8df1671070 +Author: Chris Wilson +Date: Tue Mar 29 11:38:45 2011 +0100 + + configure: version bump for 2.14.902 snapshot + + Signed-off-by: Chris Wilson + +commit 2f2680793952876c89796174bed53c824fe6d1cb +Author: Chris Wilson +Date: Tue Mar 29 11:38:18 2011 +0100 + + NEWS: Entry for 2.14.902 snapshot + + Signed-off-by: Chris Wilson + +commit 7ccbec801e9ee32fc110db730dfec674a94dea21 +Author: Keith Packard +Date: Thu Mar 24 11:06:57 2011 -0700 + + Recover from i830_dri2_add_frame_event out-of-memory condition + + If adding either the frame or client resources fails, we need to clean + up afterwards properly. + + First, add_frame_event needs to internally clean up after itself by + undoing any partial execution. Second, the callers need to look at the + return value and free the swap/flip info structure when necessary. + + Signed-off-by: Keith Packard + Reviewed-by: Julien Cristau + +commit ec133abc4bd8caba15ed54e18621b816afb06981 +Author: Chris Wilson +Date: Thu Mar 24 15:32:50 2011 +0000 + + Use the per-generation batch context switch for atomic sequences + + A modest boost to throughput and reduction in CPU overhead from + not flushing the batch on every transition from BLT to RENDER. + + Signed-off-by: Chris Wilson + +commit 86f23f21ab57fcbc031bcd2b8f432a08ff4cc320 +Author: Keith Packard +Date: Wed Mar 23 17:07:49 2011 -0700 + + Skip client and drawable resource delete calls when deleting frame event + + As the frame_event is about to be freed, there's no point in cleaning + up references to the drawable and client. + + Signed-off-by: Keith Packard + +commit e1ff5182304e00c0d392092069422cae7626cf8d +Author: Keith Packard +Date: Wed Mar 9 17:00:41 2011 -0800 + + Handle drawable/client destruction in pending swaps/flips + + A pending swap or flip holds references to drawables and clients which + become invalid when destroyed. Add suitable resources to the database + to track those lifetimes and clean up the pending data structure then. + + Later, when the pending swap or flip occurs, handle a missing drawable + by just discarding the flip or swap. Handle a missing client by not + sending an event or reply. + + Signed-off-by: Keith Packard + +commit aa0328f342177e33f9c863531712eaa4577b5f2b +Author: Keith Packard +Date: Wed Mar 9 16:23:22 2011 -0800 + + dri2: Make DRI2FrameEvent public and use instead of void * + + Instead of using void * for all of the flip_info and swap_info + pointers, just make the underlying structure a public data type and + use that. + + Signed-off-by: Keith Packard + +commit ee740778f5d5355c04f6fc4564f598993b106d62 +Author: Chris Wilson +Date: Wed Mar 16 08:37:24 2011 +0000 + + i915/video: Clip indirect Xv output + + In the case of a singular clip box and rendering onto the front buffer + larger than 2048, the clip extents were being ignored. Here we can + simply reduce the size of the indirect pixmap to the clip extents. + + Reported-by: Michael Chang + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35346 + Signed-off-by: Chris Wilson + +commit 014fc7abb7b2cc2110e3ab9a0bd6f7cff2c64c05 +Author: Chris Wilson +Date: Wed Mar 9 17:10:50 2011 +0000 + + dri: Disable page-flip between a tiled buffer and a linear scanout + + Keith Packard pointed out a loophole that could cause the DDX to end up + with a tiled scanout even if the user required a linear framebuffer; + that is by using page-flipping we could replace the scanout pixmap with + another of our choosing, and not necessarily tiled. + + Close that loophole by only allowing an exchange of buffers between + identical tiling modes. For the common case, this is fine since they + will indeed be allocated with the same tiling. For the linear + framebuffer case with mesa using a tiled pixmap, we force it to blit + onto the scanout instead. + + Reported-by: Keith Packard + Signed-off-by: Chris Wilson + +commit 049ce4397ddf7fd088ce364cbb53cacf5133176f +Author: Chris Wilson +Date: Wed Mar 9 08:27:02 2011 +0000 + + Give each user of tiling separate xorg.conf options + + So that you can indeed allocate a linear framebuffer if you so desire + without breaking mesa. + + Adds: + + Section "Driver" + Option "LinearFramebuffer" "False|True" # default false + EndSection + + to xorg.conf + + Signed-off-by: Chris Wilson + +commit 0bb1a5f19e09dc553761ddd90bf6319eab94a597 +Author: Chris Wilson +Date: Wed Mar 9 08:26:44 2011 +0000 + + Update priv->stride after bo reallocation + + Signed-off-by: Chris Wilson + +commit 34f9a3335f96b16ef9df6213eb0a586c94f8f05b +Author: Chris Wilson +Date: Wed Mar 2 17:46:19 2011 +0000 + + configure: Bump for 2.14.901 snapshot + + Signed-off-by: Chris Wilson + +commit 057783937d7a42a766d0e45174c4c2dc0ffacd40 +Author: Chris Wilson +Date: Wed Mar 2 17:45:43 2011 +0000 + + NEWS: Add entry for 2.14.901 snapshot + + Signed-off-by: Chris Wilson + +commit e889d3a709b55a0731ab098b17a3364b9bf39387 +Author: Chris Wilson +Date: Sun Feb 27 10:51:50 2011 +0000 + + dri: Protect against destroying a foreign DRI drawable + + I have no clue as to how such an alien drawable reached us, but we have + the evidence of a segfault to say it can happen. + + Reported-by: Bernie Innocenti + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34787 + Signed-off-by: Chris Wilson + +commit d21d781466785c317131a8a57606925867265dc8 +Author: Daniel Vetter +Date: Tue Feb 22 18:31:44 2011 +0100 + + Fix relaxed tiling on gen2 + + Signed-off-by: Daniel Vetter + +commit 9599fde65a0d8b7e7c85199346f7b620bdd8388d +Author: Bryce Harrington +Date: Tue Feb 15 22:30:18 2011 -0800 + + Quell excessively verbose vblank counter failed error messages + + Certain error situations can result in the following printed to + Xorg.0.log at a high enough rate to make log file size a problem. + + (WW) intel(0): I830DRI2GetMSC:1062 get vblank counter failed: Invalid argument + (WW) intel(0): I830DRI2ScheduleWaitMSC:1118 get vblank counter failed: Invalid argument + + Following in the tradition of commit 0ad6d6e1, limit the warnings to be + output 5 times, then quell the remainder. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34322 + Ref.: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/710594 + + Signed-off-by: Bryce Harrington + Signed-off-by: Chris Wilson + +commit 0ca595e9d533019b241666d29b421c7b36f9647a +Author: Adam Jackson +Date: Thu Feb 17 15:26:35 2011 -0500 + + Fix IGD and IGDNG constants to be comprehensible + + Since, with GPU-on-package, it's hard to talk about a model number for + a specific chipset like 855GM, just use the platform names. + + Signed-off-by: Adam Jackson + Signed-off-by: Chris Wilson + +commit 4c66b28870b050493ad96f7b0fe2d70d7ee539c7 +Author: Chris Wilson +Date: Thu Feb 17 16:48:24 2011 +0000 + + uxa: Fallback if the temporary is too large + + If the render operation requires a temporary source Picture and the + operation is large, larger than the maximum permitted bo, then we will + fail to allocate the bo. In this case, we need to fallback and perform + the operation on the CPU rather than dereference a NULL bo. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34399 + Signed-off-by: Chris Wilson + +commit 23f9b14df7c102c1036134835dd5d1a508059858 +Author: Chris Wilson +Date: Sat Feb 12 10:42:34 2011 +0000 + + i965: Remove broken maximum base addresses from video + + WRONG. + + The hardware was never limited to 0x1000000 and the kernel can quite + rightly place objects above that limit. Specifying such had no relation + to reality, so why did we do it? TWICE! + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34017 + Signed-off-by: Chris Wilson + +commit 9184af921bc2f332fcb6c9b47001414378eab8e2 +Author: Javier Jardón +Date: Wed Feb 9 00:36:37 2011 +0000 + + Update autotools configuration + + Use new libtool syntax and silent-rules to silent + the build output a bit (linux-like) + +commit 6e721e098b9181e8e77e314f966729d28e705582 +Author: Bryce Harrington +Date: Fri Feb 4 00:15:13 2011 -0800 + + Check return value of uxa_acquire_solid() since it can return NULL + + uxa_acquire_solid returns NULL under OOM. Thus the value of solid + must be checked before dereferencing it in the uxa_get_offscreen() + call. + + Signed-off-by: Bryce Harrington + Signed-off-by: Chris Wilson + +commit da990536eca09c6de74627541cd56ecfad925eda +Author: Chris Wilson +Date: Thu Feb 3 09:41:48 2011 +0000 + + uxa: Undo damage translation before appending + + The region is used to paint onto the backing pixmap (and thus + translated) prior to being passed to the damage layer (wrt to the + drawable). So the local translation needs to be undone first. + + Identified by Christopher James Halse Rogers. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33650 + Signed-off-by: Chris Wilson + +commit ce1e0969058f8c70b624bc85bb8d6698a35794d3 +Author: Chris Wilson +Date: Mon Jan 31 20:27:26 2011 +0000 + + Rename 'intel' backlight to match upstream name in 2.6.38 + + (Just waiting for libbacklight to bring sanity...) + + Signed-off-by: Chris Wilson + +commit 80f59c8a4f51ccc27653a2de2dee2563b1e911f1 +Author: Cyril Brulebois +Date: Mon Jan 31 06:22:39 2011 +0100 + + xvmc: Stop using uninitialized variable. + + The actual code was removed in 5f64122551, where the get_surface_status + driver callback was dropped. Just return Success if there were no issues + with the parameter. + + Get rid of the following with CFLAGS="-Wall -Werror": + | CC intel_xvmc.lo + | cc1: warnings being treated as errors + | intel_xvmc.c: In function ‘XvMCSyncSurface’: + | intel_xvmc.c:677: error: ‘ret’ may be used uninitialized in this function + | intel_xvmc.c:672: note: ‘ret’ was declared here + + Signed-off-by: Cyril Brulebois + Signed-off-by: Chris Wilson + +commit 86284abafbe1364f82509d2656c82ba11cdce6cc +Author: Cyril Brulebois +Date: Mon Jan 31 06:22:38 2011 +0100 + + xvmc: Silence gcc, adding a cast to work around signedness issues. + + Both exported XvMCPutSlice/XvMCPutSlice2 functions have a prototype with a + parameter whose signedness differs from the one in the put_slice/put_slice2 + functions they call. Make it unsigned through a cast. + + Get rid of this accordingly with CFLAGS="-Wall -Werror": + | CC intel_xvmc.lo + | cc1: warnings being treated as errors + | intel_xvmc.c: In function ‘XvMCSyncSurface’: + | intel_xvmc.c:677: error: ‘ret’ may be used uninitialized in this function + | intel_xvmc.c:672: note: ‘ret’ was declared here + + Signed-off-by: Cyril Brulebois + Signed-off-by: Chris Wilson + +commit fc2eb64d7a184770ccd708a5b2337a538ca2b9db +Author: Cyril Brulebois +Date: Mon Jan 31 09:59:04 2011 +0000 + + xvmc: Silence gcc, add parentheses around arithmetic. + + Get rid of those accordingly with CFLAGS="-Wall -Werror": + | CC i915_xvmc.lo + | cc1: warnings being treated as errors + | i915_xvmc.c: In function ‘i915_mc_one_time_state_emit’: + | i915_xvmc.c:369: error: suggest parentheses around arithmetic in operand of ‘|’ + | i915_xvmc.c:374: error: suggest parentheses around arithmetic in operand of ‘|’ + | i915_xvmc.c:379: error: suggest parentheses around arithmetic in operand of ‘|’ + | i915_xvmc.c: In function ‘i915_mc_load_indirect_render_emit’: + | i915_xvmc.c:708: error: suggest parentheses around arithmetic in operand of ‘|’ + | i915_xvmc.c:713: error: suggest parentheses around arithmetic in operand of ‘|’ + + Signed-off-by: Cyril Brulebois + Signed-off-by: Chris Wilson + +commit 1b9349bceb9172d9bf01638b2df10b9b79e883b4 +Author: Cyril Brulebois +Date: Mon Jan 31 06:22:36 2011 +0100 + + xvmc: Silence gcc, add parentheses around assignment. + + Get rid of the following with CFLAGS="-Wall -Werror": + | CC intel_xvmc_dump.lo + | cc1: warnings being treated as errors + | intel_xvmc_dump.c: In function ‘intel_xvmc_dump_open’: + | intel_xvmc_dump.c:41: error: suggest parentheses around assignment used as truth value + + Signed-off-by: Cyril Brulebois + Signed-off-by: Chris Wilson + +commit ae8877e30707cae586565b4deee4c7fd9ac7d3ed +Author: Cyril Brulebois +Date: Mon Jan 31 06:22:35 2011 +0100 + + xvmc: Get rid of unused variables. + + Signed-off-by: Cyril Brulebois + Signed-off-by: Chris Wilson + +commit 8bd6a7149fcb5f9ed6580dc2aa0180874938a1ea +Author: Chris Wilson +Date: Sat Jan 29 12:04:09 2011 +0000 + + Enable conditional compilation of asserts + + With '--disable-debug' we define NDEBUG and so disable the asserts, that + is we continue to default to compiling asserts into the code. + + Signed-off-by: Chris Wilson + +commit a5a1ab7bbc58ec884cd0b90fe7139f402291b92f +Author: Chris Wilson +Date: Fri Jan 28 17:20:06 2011 +0000 + + i915: Remove unused 'w' and 'h' + + Signed-off-by: Chris Wilson + +commit 2c9b3225d8c7b53e2d921705dbb069710abcea5d +Author: Chris Wilson +Date: Fri Jan 28 17:19:39 2011 +0000 + + i915: Remove unused 'num_floats' variable + + Signed-off-by: Chris Wilson + +commit c6dc27562abbc8ca9e873ad502ca49ae010461d2 +Author: Chris Wilson +Date: Mon Jan 24 20:25:27 2011 +0000 + + uxa: Only recreate the glyph cache on *generational* updates + + The screen resources are recreated when the screen is rotated as well, + without being finalized. In this case, we do not need to reconstuct the + cache (or if we did, we would need to tear it down first). + + Reported-by: Till Matthiesen + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33412 + Signed-off-by: Chris Wilson + +commit 5baa63c634990810a66c3150b4f2b76fcee2df38 +Author: Xiang, Haihao +Date: Fri Jan 21 08:45:52 2011 +0800 + + Fix an error in 4c4ad555564a80311df1a4b762eb1e119c6d95fb. + + See the original patch at https://bugs.freedesktop.org/show_bug.cgi?id=24767 + + Signed-off-by: Xiang, Haihao + +commit 3e28a0c0b43823d3104fe8fc50b5994b41fc0cc1 +Author: Chris Wilson +Date: Thu Jan 20 15:07:26 2011 +0000 + + Create the UXA generational resources during screen create + + Signed-off-by: Chris Wilson + +commit 4c4ad555564a80311df1a4b762eb1e119c6d95fb +Author: Xiang, Haihao +Date: Wed Jan 19 15:25:06 2011 +0000 + + Correct offset of planes within clipped window + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24767 + Reported-and-tested-by: Sitsofe Wheeler + Signed-off-by: Chris Wilson + +commit 5a22bc999de8555f26c639eaffbe73b680746174 +Author: Eric Anholt +Date: Mon Jan 17 11:32:37 2011 -0800 + + Quiet compiler warning about is_affine_src same way we do is_affine_mask. + +commit 3a2a4b0784f0fc96a5457b18931471f15ad745fc +Author: Simon Farnsworth +Date: Mon Jan 17 17:38:23 2011 +0000 + + Fix textured video when destination is larger than screen + + In our application, the screen is never rotated from the point of view + of the driver; instead, the compositor applies a suitable rotation as + it composites the display. This works fine on 945, but on 965, videos + are limited in height to the actual height of the screen. + + Change various bits of code so that we use the width and height of the + destination pixmap instead of the width and height of the virtual + screen. This works correctly both for XVideo to offscreen storage + (CompositeRedirect) and for XVideo to the screen (no compositor). + +commit fd9235ebe03a01982238cdd6e8b55f613e14b6af +Author: Chris Wilson +Date: Fri Dec 17 00:58:36 2010 +0000 + + Delete unused memory allocation flags. + + Signed-off-by: Chris Wilson + +commit 03248a798409ca4dd1caf5e25a3d5f5a80173260 +Author: Chris Wilson +Date: Fri Dec 17 00:57:01 2010 +0000 + + Cache the fixed crtc<->pipe relationship + + Signed-off-by: Chris Wilson + +commit 00a2aee38dc5cbbd4907a593fa8d617f5a20292e +Author: Chris Wilson +Date: Fri Dec 17 00:50:33 2010 +0000 + + Remove unused I830Output + + Signed-off-by: Chris Wilson + +commit a851879695c48e88d421b053a78f867d9902273f +Author: Chris Wilson +Date: Fri Dec 17 00:48:26 2010 +0000 + + Remove bitrotted, but fortunately unused, I830CrtcPrivate + + Signed-off-by: Chris Wilson + +commit f8a5d7737e014e99943b947d088a4f9f1b465d46 +Author: Chris Wilson +Date: Fri Dec 17 00:37:47 2010 +0000 + + Delete some dead code + + Signed-off-by: Chris Wilson + +commit 968151898b807b06953b2f4170ac02889f16c8dc +Author: Chris Wilson +Date: Fri Dec 17 00:18:25 2010 +0000 + + Remove unused GTT/Map sizes and addresses + + These have been made obsolete by KMS and GEM. + + Signed-off-by: Chris Wilson + +commit 19b5817a54d4a17161340ada9bf20027644ff074 +Author: Chris Wilson +Date: Fri Dec 17 00:15:31 2010 +0000 + + Remove unused struct _intel_memory definition + + Signed-off-by: Chris Wilson + +commit 40a7bde9140c0ae6412b8f916b1455d44e2af6cf +Author: Chris Wilson +Date: Fri Jan 7 23:46:07 2011 +0000 + + configure: version bump for 2.14.0 + +commit 8ecbba2aca657da3894eb77e856ac2d4e9efc0cc +Author: Chris Wilson +Date: Fri Jan 7 23:45:06 2011 +0000 + + NEWS: Release notes for 2.14.0 + +commit 22d7b61791c382088a6c0df5dce3a15405d6c495 +Author: Chris Wilson +Date: Tue Jan 4 12:32:01 2011 +0000 + + i965: Fix off-by-one in assert + + Signed-off-by: Chris Wilson + +commit a7c7a9108f76aa312f3d5efa466052b914c81484 +Author: Chris Wilson +Date: Tue Jan 4 10:53:30 2011 +0000 + + configure: version bump for 2.13.903 snapshot + + Signed-off-by: Chris Wilson + +commit 3fbecf34630c3588618900afdfbd9a4266856178 +Author: Chris Wilson +Date: Tue Jan 4 10:52:44 2011 +0000 + + NEWS: Add entry for 2.13.903 + + Signed-off-by: Chris Wilson + +commit 90538ecfff9c324d61419f451d41d26ab026f232 +Author: U. Artie Eoff +Date: Tue Dec 21 17:42:38 2010 -0700 + + configure: suggest upstream to find macros in case they're missing. + + added upstream suggestion to error message in case xorg macros or + xserver macros are missing. removed package manager references in + suggestion since these are 'user' and/or 'distribution' preferences. + + Signed-off-by: Chris Wilson + +commit 6d50f5a140dbefdf86eb25d18d08473aa7e42acc +Author: Chris Wilson +Date: Mon Jan 3 23:06:14 2011 +0000 + + If the crtc is not enabled, then it can't be on + + Signed-off-by: Chris Wilson + +commit 145c42a101c3150fb1e2cae8a1780b26e8b56f42 +Author: Adam Jackson +Date: Mon Jan 3 17:52:27 2011 -0500 + + dri2: Fix interlace computation + + scrn->currentMode is a hack for xf86vidmode and in general is wrong for + RANDRful drivers. Use the mode on the associated CRTC instead. + + Signed-off-by: Adam Jackson + [ickle: crtc->mode is a ModeRec not Ptr] + Signed-off-by: Chris Wilson + +commit b0d10ff04a24a951256a79710ba22b325b549ba4 +Author: Adam Jackson +Date: Mon Jan 3 17:52:26 2011 -0500 + + xv: Fix interlace computation + + scrn->currentMode is a hack for xf86vidmode and in general is wrong for + RANDRful drivers. Use the mode on the associated CRTC instead. + + Signed-off-by: Adam Jackson + [ickle: crtc->mode is a ModeRec] + Signed-off-by: Chris Wilson + +commit 0ad6d6e1a678de7d8c2d4cd7c734887e1deb2f9b +Author: Chris Wilson +Date: Mon Jan 3 16:52:07 2011 +0000 + + dri: Only issue a warning for an "impossible" flip return 5 times + + As it appears that some kernels do indeed return the "wrong" value, + issuing a warning 60 times a second is a cruel and unusual punishment. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32680 + Signed-off-by: Chris Wilson + +commit d729ef02f2955f7476df4c65403bc1f8e705b780 +Author: Chris Wilson +Date: Sun Jan 2 09:11:10 2011 +0000 + + dri: Don't wait upon a NULL current mode + + There is a race condition between the dri swapbuffers code and + hotplugging whereby we might attempt to execute a wait upon a + non-existent output. This causes a NULL dereference and a loud crash. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32770 + Signed-off-by: Chris Wilson + +commit 537fa55ed2449e91f3dd1e04abc720c6818d7227 +Author: Chris Wilson +Date: Sun Jan 2 09:06:28 2011 +0000 + + dri: Fix the use of the uninitialised bo for flink + + Reported-by: Jeff Chua + Signed-off-by: Chris Wilson + +commit dbc542b9d38ff9781efcdf1d5308e97f04499138 +Author: Chris Wilson +Date: Fri Dec 31 23:29:05 2010 +0000 + + dri: Protect against using dri with an non-gem pixmap + + Reported-by: Jeff Chua + Signed-off-by: Chris Wilson + +commit 53fbc9f1760ee481cba1f6dceb9e7c97282a2976 +Author: Chris Wilson +Date: Thu Dec 30 15:32:40 2010 +0000 + + Don't replace the scanout bo through PutImage + + As the bo may be pinned for either use by the scanout or through sharing + with another application, under those circumstances we cannot replace + the bo itself but must force the blit for PutImage. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31367 + Reported-and-tested-by: Bjørn Mork + Signed-off-by: Chris Wilson + +commit 7667ad8432c032aec3a2aa004fc4dfc1877971b3 +Author: Chris Wilson +Date: Fri Dec 24 09:42:29 2010 +0000 + + dri: Differentiate identical "get vblank failed" messages with line no + + Signed-off-by: Chris Wilson + +commit 875d4828352c501ec5d0169735fb078807e76f2e +Author: Chris Wilson +Date: Thu Dec 23 19:36:12 2010 +0000 + + i830: amalgamate consecutive composites into a single primitive + + Improve aa10text on i845 from 218kglyphs/s to 234kglyphs/s + + Signed-off-by: Chris Wilson + +commit 58d9912e447cf6e29b20747b5ed6ee595687ce8d +Author: Chris Wilson +Date: Wed Dec 22 13:50:53 2010 +0000 + + Remove the deprecated function 'XNFprintf' + + As we know the maximum length of the string, we can replace our single + usage of XNFprintf with snprintf. + + Signed-off-by: Chris Wilson + +commit e8db77e019e19ace48592b2f6d96af6baa9a228e +Author: Chris Wilson +Date: Tue Dec 21 23:03:21 2010 +0000 + + Revert "Suggest where to find xorg-macros in case it's missing" + + I failed my reading comprehension and didn't spot that the help strings + pointed to two separate downstream packages. + + Thanks to Carl Worth for pointing out my mistake. + + This reverts commit ebb7aca66785730737bc739624006e55d43dfe1b. + +commit ebb7aca66785730737bc739624006e55d43dfe1b +Author: Chris Wilson +Date: Tue Dec 21 22:23:24 2010 +0000 + + Suggest where to find xorg-macros in case it's missing + + [Modified version of U. Artie Eoff's commit to remove the duplicated + string. The paraphrased commit message is repeated below for clarity.] + + xorg-macros is often package under an unusual name, so provide some + clues as to what name to try on the user's distribution. Installing + build-deps would be just too easy... + + Also include a check for the existence of the XORG_DRIVER_CHECK_EXT + macro, otherwise configure might continue in spite of the missing macro + and cause obtuse syntax errors. + + Signed-off-by: Chris Wilson + +commit 90576f95f35e528fa2c667df162c5dc7ec98975d +Author: U. Artie Eoff +Date: Tue Dec 21 15:10:41 2010 -0700 + + configure: updated m4 macro check in configure.ac + + Added m4 check for XORG_DRIVER_CHECK_EXT macro definition. Updated m4 fatal messages to give better hint on how to resolve error when xorg macros are missing. Previously, configure would continue in spite of the missing macros and the build would fail for syntax errors. + +commit 1ac2e04023f84dbf1f3db2ecad1cadd159aa614d +Author: Chris Wilson +Date: Mon Dec 20 10:55:11 2010 +0000 + + Undo: Disable BLT for i830 and 845G + + Reported-by: György Balló + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32482 + Signed-off-by: Chris Wilson + +commit 6f21405454487adf7623cf22f0fdd9f127099afd +Author: Chris Wilson +Date: Fri Dec 17 16:37:55 2010 +0000 + + G35 is gen4 and not gen3 + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32478 + Reported-and-tested-by: Michal Marek + Signed-off-by: Chris Wilson + +commit 5743c223877fbff710cdd5114cff6d3ee3108309 +Author: Mario Kleiner +Date: Thu Dec 9 03:27:59 2010 +0100 + + Check consistency of pageflip completion vblank count. + + Implements a consistency check on returned vblank + count values of pageflip completion. Impossible + values are detected, a x-warning is logged and + returned (msc,ust) values are marked invalid, + so clients could perform error handling. Such + a warning would indicate bugs in the pageflip + completion routine of future kms drivers or the + ddx and thereby aid driver debugging. + + Signed-off-by: Mario Kleiner + Signed-off-by: Chris Wilson + +commit 2177e6032146f4720f244e98f7c0d6df1b925784 +Author: Mario Kleiner +Date: Thu Dec 9 03:12:35 2010 +0100 + + Fix reporting of pageflip completion events on multi-head. + + When a drawable is page-flipped on multiple crtc's (fullscreen + drawable on mirror-mode or multi-head x-screen), only one pageflip + event is finally delivered, after the last participating crtc signals + flip completion, this to avoid visual corruption. + + Old code returned vblank count and timestamps of flip completion + of this last crtc, instead of the values of the "master crtc", the + one that was used for initially scheduling/triggering the pagflip + via vblank events. (master = I830DRI2DrawablePipe(drawable)) + + This patch makes sure that the pageflip completion values of the + "master" crtc are returned, otherwise client applications will + get confused by the random (msc, ust) values returned by whichever + crtc was the last to complete its flip. Without this, the returned + values change randomly and jump forward and backward in time and + count. + + Signed-off-by: Mario Kleiner + Signed-off-by: Chris Wilson + +commit 71af40a75fbdd1054b1111e8cbe67ad1f97e6613 +Author: Chris Wilson +Date: Fri Dec 10 15:55:09 2010 +0000 + + NEWS: 2.14, I meant the upcoming 2.14 release! + + Signed-off-by: Chris Wilson + +commit 556331a22101d08babbd276236f74ffcc380171c +Author: Chris Wilson +Date: Fri Dec 10 15:28:37 2010 +0000 + + configure: version bump for 2.13.902 + + This is actually the first release candidate for 2.14. + + Signed-off-by: Chris Wilson + +commit e01ea4a45c1cf8953a6d5ff6c600d76dbbe4760d +Author: Chris Wilson +Date: Fri Dec 10 15:28:00 2010 +0000 + + NEWS: Add entry for the 2.13.902 snapshot + + Signed-off-by: Chris Wilson + +commit 8df6f0a6082ad762ec69be7789a961db0c74154a +Author: Chris Wilson +Date: Fri Dec 10 12:26:16 2010 +0000 + + configure: Bump required libdrm to 2.4.23 + + To pull in the required headers for BLT and relaxed fencing support. + + Signed-off-by: Chris Wilson + +commit 9b967807c2d240488a715509649663aac3583532 +Author: Chris Wilson +Date: Tue Dec 7 20:45:16 2010 +0000 + + Revert "i965: The RenderCache flush after every glyph is required for compiz" + + This reverts commit 03e8351179b1c25d219842ef3e01ee8e176f594f. + + * sigh. + + This was only meant to be a temporary debugging hack, not for public + consumption (or embarrassment). + + Signed-off-by: Chris Wilson + +commit 27e33928f87ecb806d1f8c459d4a4ada76b0e30e +Author: Chris Wilson +Date: Tue Dec 7 20:42:24 2010 +0000 + + i965: Mark sure we mark reused render targets as dirty + + ... or else we may forget to flush them again. + + Signed-off-by: Chris Wilson + +commit 03e8351179b1c25d219842ef3e01ee8e176f594f +Author: Chris Wilson +Date: Tue Dec 7 19:27:57 2010 +0000 + + i965: The RenderCache flush after every glyph is required for compiz + + ... now who can explain why. + + Signed-off-by: Chris Wilson + +commit d90c8f4d0bb6b79ecdcaa82f87291169c18c64b9 +Author: Chris Wilson +Date: Tue Dec 7 19:22:30 2010 +0000 + + i965: Invalidate pixmap binding location on reuse. + + Signed-off-by: Chris Wilson + +commit 4a186a612376bdd6f86c026e8b8b442108868a0a +Author: Chris Wilson +Date: Tue Dec 7 16:56:57 2010 +0000 + + Always flush the batch before blocking for new X requests + + This should prevent any lag when waiting upon user input, for example + whilst logging in with gdm. + + Signed-off-by: Chris Wilson + +commit 1ba983034b3a70fb541dc359189c020ee497c634 +Author: Chris Wilson +Date: Tue Dec 7 12:27:29 2010 +0000 + + uxa: Emit the damage after the render for the workaround in uxa_solid_rects + + Signed-off-by: Chris Wilson + +commit 00c204a7b2df7a6b501db9b57603534a45ecafa9 +Author: Chris Wilson +Date: Mon Dec 6 16:34:52 2010 +0000 + + snb: Only emit CC and DepthStencil bos once per batch + + Signed-off-by: Chris Wilson + +commit 084ae43110240c582ae7cd6452966dd9f22350fa +Author: Chris Wilson +Date: Mon Dec 6 15:57:19 2010 +0000 + + snb: Restore drawrect, we need the implicit flush + + Something is wrong, we should be tracking when to invalidate the caches + as appropriate, yet I can not finding the missing flush to replace the + implicit one of DRAW_RECTANGLE. + + Fixes cacomposite. + + Signed-off-by: Chris Wilson + +commit f3a47d7f235d18e4529e3898a48673c7c3cbd489 +Author: Chris Wilson +Date: Mon Dec 6 14:11:05 2010 +0000 + + snb: Cache pixmap binding locations + + Signed-off-by: Chris Wilson + +commit 4d48fed9aa0c3c7b84e74b4f72f298f580a8973c +Author: Chris Wilson +Date: Mon Dec 6 13:50:43 2010 +0000 + + snb: Cache state between composite ops + + Signed-off-by: Chris Wilson + +commit a58e5a1bdf10be3b96ecaa3d5e3ee288eab1063f +Author: Chris Wilson +Date: Mon Dec 6 13:34:53 2010 +0000 + + snb: Emit more invariants only once + + Signed-off-by: Chris Wilson + +commit e8f41c371024e2f3845c7652b22af8f5900200f2 +Author: Chris Wilson +Date: Sun Dec 5 21:37:23 2010 +0000 + + uxa: Prevent reading past the last byte on upload/download + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29752 + Reported-by: Sergey Samokhin + Signed-off-by: Chris Wilson + +commit c2fac6ca108734dd9566570b15f01cc476fa53dc +Author: Matthias Hopf +Date: Fri Nov 19 04:29:57 2010 +0100 + + Don't use hardware acceleration on Sandybridge rev 07 hardware or earlier. + + This is known to lock up the GPU even with the workaround in place. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31773 + Signed-off-by: Matthias Hopf + Signed-off-by: Chris Wilson + +commit 8abade8a2139b500251488be5d6390f149666fb2 +Author: Chris Wilson +Date: Sun Dec 5 09:55:43 2010 +0000 + + display: Flush any pending batches before changing modes. + + Signed-off-by: Chris Wilson + +commit 8450aba6c731b20e5cd7b55f1d747f00a6523291 +Author: Chris Wilson +Date: Sun Dec 5 01:08:51 2010 +0000 + + i965: Also flush the vertex buffer when restarting the array. + + As a corollary to filling one vertex array and beginning a new one is + remembering to emit the old one before overwriting... + + Signed-off-by: Chris Wilson + +commit f40f8bcf07bd7f496bfd3069eddfcbeb3d1bf8be +Author: Chris Wilson +Date: Sun Dec 5 00:26:22 2010 +0000 + + i965: Check for potential vertex array overflow every time + + There was a reason why we need to check at the start of every composite + operation to see if we have enough space in the array to fit the + vertices, which I promptly forgot when moving the code around to make + it look pretty. + + * sigh. + + Signed-off-by: Chris Wilson + +commit 55c5f1876e2329a938955967f5d45c814e50beb5 +Author: Chris Wilson +Date: Fri Dec 3 02:05:05 2010 +0000 + + Wait on the current buffer to complete when running synchronously. + + And remove the vestigal wait upon changing crtc as this is more properly + done in the kernel. + + Signed-off-by: Chris Wilson + +commit 3cc74044ce3546cc7dc2e918cbabbb41a77f4026 +Author: Chris Wilson +Date: Thu Dec 2 12:07:44 2010 +0000 + + i965: Amalgamate surface binding tables + + Signed-off-by: Chris Wilson + +commit a1fa0dbfdafea32139d4457d81b9d722df955eaf +Author: Chris Wilson +Date: Thu Dec 2 11:25:05 2010 +0000 + + i965: Upload an entire vbo in a single pwrite, rather than per-rectangle + + Signed-off-by: Chris Wilson + +commit 23437fe6769322d48cc3d264660717475b5d0d74 +Author: Chris Wilson +Date: Fri Dec 3 01:16:16 2010 +0000 + + i965: Use reciprocal scale factors to avoid the divide per-vertex-element + + Signed-off-by: Chris Wilson + +commit 0bb135c40e5ac1bf7593ec1d68d2815cbf47aa25 +Author: Chris Wilson +Date: Tue Nov 23 22:27:38 2010 +0000 + + Disable BLT for i830 and 845G + + This pair of chipsets seem broken beyond repair, specifically the + erratum that causes the wrong PTE entry to be invalidated, so disable + our incorrect attempts to use the BLT on those devices. + + Signed-off-by: Chris Wilson + +commit 33c08882c0d551afb28baef643279901dcc65fa9 +Author: Keith Packard +Date: Wed Nov 17 16:37:53 2010 +0800 + + Mark outputs as DPMSModeOn and restore backlight at mode set + + The kernel always turns monitors on when doing mode setting, and so no + further DPMS action is required. Note this in the mode setting code by + marking the updated DPMS mode and restoring any saved backlight level. + + Signed-off-by: Keith Packard + Reviewed-by: Eric Anholt + +commit cc930a37612341a1f2457adb339523c215879d82 +Author: Chris Wilson +Date: Sun Nov 14 19:47:00 2010 +0000 + + uxa: Relax fencing some more for gen3 + + Allow fenced allocations even for small pixmaps if the kernel supports + relaxing fencing (where only the used pages are allocated). + + Signed-off-by: Chris Wilson + +commit 3c5b1399e29ef577b8b91655b5e1c215d1b6dfbb +Author: Chris Wilson +Date: Tue Nov 9 20:20:06 2010 +0000 + + i915: Disable maximum state addresses + + As the kernel controls the relocation of state buffers, we should not + hard code the maximum permissible value for them. + + Fixes an eventual hang with full-gtt. + + Reported-by: Peter Clifton + Signed-off-by: Chris Wilson + +commit 81d355a8dcdfe3d0924bb843bcc0e6546f695391 +Author: Chris Wilson +Date: Tue Nov 9 09:28:54 2010 +0000 + + uxa: Fix crash after allocation failure + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31487 + Reported-by: Thomas Fjellstrom + Signed-off-by: Chris Wilson + +commit 861ee17ae662ffec2269292f92da7833df508b1a +Author: Carl Worth +Date: Fri Nov 5 12:55:02 2010 -0700 + + Update version number to 2.13.901 + + In preparation for a snapshot. + +commit aaa436b437839a80d340cc5ad598ec4b47ed2eff +Author: Carl Worth +Date: Fri Nov 5 12:54:16 2010 -0700 + + NEWS: Add release notes for 2.13.901 snapshot. + + An intermediate snapshot to capture recent developments. + +commit 6b66b45b1ff207b80b81973745f42a776448f764 +Merge: a44a63d 9f232ad +Author: Carl Worth +Date: Fri Nov 5 12:51:55 2010 -0700 + + Merge commit '2.13.0' + + This changes the version number and adds the 2.13.0 release notes, + (which were otherwise missing from the master branch). + +commit a44a63d2ff6c01c3dc61de6f736dd441ddd25e52 +Author: Chris Wilson +Date: Fri Nov 5 09:58:45 2010 +0000 + + Wait for any pending rendering before switching modes. + + A perennial problem we have is the accursed WAIT_FOR_EVENT hangs, which + occur when we switch the framebuffer before the WAIT_FOR_EVENT completes + and upsets the GPU. + + We have tried more subtle approaches to detected these and fix them up in + the kernel, to no avail. What we need to do is to delay the framebuffer + flip until the WAIT completes, which is quite tricky in the kernel + without new ioctls and round-trips. Instead, apply the big hammer from + userspace and synchronise all rendering before changing the framebuffer. + I expect this not to cause noticeable latency on switching modes (far + less than the actual modeswitch) and should stop these hangs once and + for all. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31401 (...) + Signed-off-by: Chris Wilson + +commit 52b32436b9e14a3e13818f80102150ff5bc3c002 +Author: Chris Wilson +Date: Wed Nov 3 19:42:26 2010 +0000 + + Downgrade tiling allocation failure to a warning + + We emitted this message as an error even though we fallback and attempt + to allocate a non-tiled framebuffer before failing (with an appropriate + error message). + + Signed-off-by: Chris Wilson + +commit 18839aaec505f8bbdb0690fe694162bf09a87d5c +Author: Chris Wilson +Date: Wed Nov 3 18:14:29 2010 +0000 + + Fallback to shadow for Sandybridge if we don't have access to the BLT + + If we attempt to emit BLT batches without kernel support, we just end up + with EINVAL and no rendering. Prevent this, and avoid uncached + rendering, by restoring the shadow fallback paths if there is no BLT + support. + + Signed-off-by: Chris Wilson + +commit 8ff37667bf864b771d16a58fc5041cb48408b6a8 +Author: Eric Anholt +Date: Tue Nov 2 10:36:03 2010 -0700 + + Remove the intermittent GEM_THROTTLE call. + + This is a holdover from early GEM work when we weren't syncing on the + DRI client side. It would keep clients from getting too far ahead and + killing their interactivity, by bringing everyone to a halt when + anyone was too far ahead. + + Now, GL clients throttle themselves to avoid the problem, and it turns + out that in the case that they don't (long rendering to buffers with + no swap), this actually reduces X Server interactivity: instead of + lagging of X rendering behind input, you get no response for seconds + at a time, then a burst of rendering, then nothing again. + + Reported by ajax. Tested with moving a window while running + cairo-perf-trace on the GL backend (improvement) and X backend (no + significant change in responsiveness). + +commit 540c5742186c26c3aeccb7b5d3ff0f374722a20c +Author: Xiang, Haihao +Date: Tue Nov 2 11:05:32 2010 +0800 + + render: use headerless render target write + + It is weird that some rendercheck cases only work fine with headerless write. + Need to update intel-gen4asm to support headerless write + + Signed-off-by: Xiang, Haihao + +commit 7a3109312e43ce4c2f600a65fe6bc821a8f0ebde +Author: Xiang, Haihao +Date: Wed Oct 27 16:51:28 2010 +0800 + + render: acceleration for composite on Sandybridge + + Signed-off-by: Xiang, Haihao + +commit 0ab2c05a291738ee763eb518c46e6dcfe29249a2 +Author: Xiang, Haihao +Date: Wed Oct 27 16:49:26 2010 +0800 + + render: fragments for composite on Sandybridge + + Signed-off-by: Xiang, Haihao + +commit 21c86548dc2c80632c49ec6ec4da2935a0c99476 +Author: Xiang, Haihao +Date: Wed Oct 27 16:47:36 2010 +0800 + + render: fix send instruction used in sampling fragments + + To prepare for composite on Sandybridge + + Signed-off-by: Xiang, Haihao + +commit 8d008ca89d44aa10aeb032d631971aaebb388675 +Author: Xiang, Haihao +Date: Mon Oct 25 15:39:39 2010 +0800 + + render: set the surface state base address + + It is the same as commit 73d4c7d7 + + Signed-off-by: Xiang, Haihao + +commit b5ae596a0746e5a37e86f5b0980f9265e0061142 +Author: Chris Wilson +Date: Mon Nov 1 11:11:09 2010 +0000 + + Flush BLT batches before starting an atomic RENDER batch + + Signed-off-by: Chris Wilson + +commit 42363134bd38fb406d90cdb9e5b227836a793912 +Author: Zou Nan hai +Date: Mon Nov 1 13:23:36 2010 +0800 + + Support BLT acceleration on gen6 + + Signed-off-by: Zou Nan hai + Signed-off-by: Chris Wilson + +commit 5bed685f765671d63642b24e17abd70579c40ddf +Author: Zou Nan hai +Date: Mon Nov 1 13:23:35 2010 +0800 + + add BLT ring support + + gen6+ platform has a BLT engine with seperate + command streamer to support BLT commands. + + Signed-off-by: Zou Nan hai + [ickle: merge trivial conflict] + Signed-off-by: Chris Wilson + +commit 6ec3ff134baeac33d9d5821695d5f80843a96c91 +Author: Xiang, Haihao +Date: Fri Oct 15 11:21:09 2010 +0800 + + Xv: don't call intel_wait_for_scanline on Sandybridge + + MI_LOAD_SCAN_LINE_INCL command is not available on sandybridge. + + Signed-off-by: Xiang, Haihao + +commit 9e73cbd7eea61f2fe69692056ca446a4d95e17c2 +Author: Xiang, Haihao +Date: Fri Oct 15 11:20:22 2010 +0800 + + Xv: enable TextureAdaptor for Sandybridge + + Signed-off-by: Xiang, Haihao + +commit 3213849907bf1b1468872668d10764054c1034fe +Author: Xiang, Haihao +Date: Wed Oct 27 09:54:05 2010 +0800 + + Xv: setup pipeline for Xv on Sandybridge + + Signed-off-by: Xiang, Haihao + +commit 9e4dd27aa848acae1b74b77bbbc0a5bb9f6a502a +Author: Xiang, Haihao +Date: Thu Oct 21 16:10:14 2010 +0800 + + Xv: fragments for xv on Sandybridge. + + Need to update intel-gen4asm to build these fragments + + Signed--off-by: Xiang, Haihao + +commit e34b3f6ef5811d5e8d156dd6582df8f442e9792e +Author: Xiang, Haihao +Date: Thu Oct 21 13:15:45 2010 +0800 + + Xv: Send instruction doesn't use implied move when sampling YUV surface + + The two fragments will be reused for sampling YUV surface + and send doesn't have implied move on Sandybridge + + Signed-off-by: Xiang, Haihao + +commit 73d4c7d7b8efc920ac09885dcace5a536f93b70f +Author: Xiang, Haihao +Date: Wed Oct 13 09:13:50 2010 +0800 + + Xv: set the surface state base address + + To prepare for Xv on Sandybridge. It is easy to fill the binding + table without relocation and make sure that the pointer to binding + table only uses bits[15:0]. + + Signed-off-by: Xiang, Haihao + +commit 5afc7472b155e8e940f12a38baf80c298dc3b364 +Author: Chris Wilson +Date: Fri Oct 29 12:23:59 2010 +0100 + + intel: don't pass a dangling pointer to GET_PARAM + + I fail at cut'n'paste. + + Signed-off-by: Chris Wilson + +commit 6b3ce2e8701e7c3fcd30ca07fc13a2cdcf62560d +Author: Chris Wilson +Date: Fri Oct 29 11:07:50 2010 +0100 + + uxa: Enable reduced fence sizes for i915 + + Depends on libdrm 362457715faacd3101929e5f0d8ae250d0ad09df (for + HAS_RELAXED_FENCING define). + + Signed-off-by: Chris Wilson + +commit b066ddda31e40afa652ae51ffc35025ac3ef6f2a +Author: Adam Jackson +Date: Sun Oct 3 14:42:56 2010 -0700 + + intel: Listen for hotplug uevents (V3) + + This connects the kernel uevent indicating monitor hotplugging to the + RandR notification events so that X applications can be notified + automatically when monitors are connected or disconnected. + + This also adds a configuration option to disable hotplug events. + + V2: missed a #ifdef HAVE_UDEV around some udev-specific declarations + + V3: document Hotplug option in man page + + Signed-off-by: Keith Packard + +commit a1c54f69643671ce296c57d132852e9846cc41d3 +Author: Eric Anholt +Date: Mon Oct 18 13:28:44 2010 -0700 + + Fix violation of gen6 requirements for depthbuffer tiling. + + In general, demoting of tiling of DRI2 buffers seems dubious, as we've + got various bits of functionality that won't all work together unless + buffers are tiled as expected. This just covers one instance of the + problem, caught by assertions in Mesa. + + Fixes: + fbo-1d + fbo-d24s8. + glean/readPixSanity + glean/rgbTriStrip + glean/scissor + +commit 33133a1d38a4dce60d2e135663b545895fc85abc +Author: Chris Wilson +Date: Sun Oct 17 09:21:06 2010 +0100 + + display: do not report failure for setting unrecognised properties + + We need to accept any changes to properties not handled by ourselves -- we + can't validate the changes ourselves. Denying those changes breaks EDID + reporting, for example. + + Reported-by: Elvis Pranskevichus + Signed-off-by: Chris Wilson + +commit 8507ef50ba08061ac158848a7c4c136e1755d87e +Author: Chris Wilson +Date: Wed Oct 13 09:45:59 2010 +0100 + + Fix driverName regression for i830 from 4083197a + + Reported-by: Stefan Glasenhardt + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30808 + Signed-off-by: Chris Wilson + +commit 15aab1ef982fb67eb2ea463089f070afd9a2cfe5 +Author: Chris Wilson +Date: Wed Oct 13 09:50:25 2010 +0100 + + Move EDID_COMPLETE_RAWDATA define to intel.h to avoid redifinition warning + + The compiler was simply warning that we defined the name prior to + including the original definition, so reorder. + + Signed-off-by: Chris Wilson + +commit d2bc2212f8be746e697a65555d6d83bc66d9ce43 +Author: Stefan Dirsch +Date: Fri Oct 8 17:48:38 2010 +0200 + + Make driver compile for 1.6 Xserver series again. Part deux. + + Signed-off-by: Matthias Hopf + Acked-by: Chris Wilson + +commit 5472359d6860af655a3c286d30558540376c9fdb +Author: Chris Wilson +Date: Fri Oct 8 15:23:13 2010 +0100 + + dri: Check for pixmap privates before dereferencing them + + It is still possible for the pixmap allocator to return a software only + pixmap (i.e. without an associated GEM buffer or intel_pixmap), so check + before dereferencing. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30707 + Reported-by: Matthias Hopf + Signed-off-by: Chris Wilson + +commit 4083197a44d1a1a05d33654b3c7d6e96d7472fe7 +Author: Chris Wilson +Date: Thu Oct 7 12:45:02 2010 +0100 + + Include a chipset generation number to clarify device specific paths. + + Signed-off-by: Chris Wilson + +commit 1444ea35706992a1f094fe029e6a7d9eec0f93c6 +Author: Chris Wilson +Date: Wed Oct 6 12:36:30 2010 +0100 + + dri+shadow: Only tweak the acceleration of CopyRegion if using shadow. + + Signed-off-by: Chris Wilson + +commit f286891d1415fc607f0c1b574e6bce4b3759493e +Author: Chris Wilson +Date: Wed Oct 6 11:38:48 2010 +0100 + + dri: Reattach the fake pixmap for the shadow scanout to the drawable. + + Signed-off-by: Chris Wilson + +commit 23ee926bcd8ddd7a2785786efdf119e4fae75bfd +Author: Chris Wilson +Date: Wed Oct 6 10:20:49 2010 +0100 + + uxa: Skip a pixmap lookup if there is no driver finish access function + + Signed-off-by: Chris Wilson + +commit 707901bf98073fb56179a0b61c806f85ef8f413c +Author: Chris Wilson +Date: Wed Oct 6 08:47:20 2010 +0100 + + uxa: Re-enable acceleration. + + A side-effect of discriminating offscreen based on the devPrivate.ptr + was that it broke uxa_finish_access and so after any fallback to s/w on + a Pixmap, it remained in software for the reminder of its life. + + Introduce an explicit boolean to mark whether or not hardware + acceleration is enabled for a pixmap (with a GEM buffer). + + Signed-off-by: Chris Wilson + +commit 54f545e0631a287f421ef6a6f20831624b212cf2 +Author: Chris Wilson +Date: Wed Oct 6 08:50:13 2010 +0100 + + Revert "Clear pixmap->devPrivate.ptr [regression in 7c7294e]" + + This reverts commit 48b4e224297fa807be0e2bc7a67bf7e94579e8de. + + The better fix is to manually mark the pixmap when acceleration is and + is not permitted. Whilst the devPrivate.ptr are invalid upon creation, + it is not worth carring code that serves no purpose. + +commit d1925deedd70c6c4374e42de5aa44989fe328b58 +Author: Chris Wilson +Date: Wed Oct 6 00:17:03 2010 +0100 + + Clear pixmap->devPrivate.ptr [regression from 7c7294e] + + ModifyPixmapHeader(pixdata = NULL) does not clear the + pixmap->devPrivate.ptr, instead the NULL value is interpreted as meaning + to keep the current value. (This is similar to the interpretation of the + other invalid values like depth=-1 which also mean not to change the + current property). However pixadata=NULL is indeed a valid value, and in + 7c7294e, devPrivate.ptr == NULL was used to differentiate a bo pixmap + from a system pixmap. Except that we never did clear the ptr as + intended, and so X would immediately crash. + + Signed-off-by: Chris Wilson + +commit 4bf2182bf9ee64795e2bf524fedf7b6c36f3cd03 +Author: Chris Wilson +Date: Tue Oct 5 09:59:04 2010 +0100 + + shadow: Use a cacheable shadow for all generations + + Always avoid direct rendering to the uncached scanout buffer, + redirecting all 2D access to the shadow instead. Then for the couple of + platforms where either the BLT is not ready or cannot be trusted (i8xx) + perform the front buffer fixup using the uncached writes from the CPU. + + Signed-off-by: Chris Wilson + +commit b27a521214728052b8b10342aaacbaf1622b8e2c +Author: Chris Wilson +Date: Mon Oct 4 20:31:44 2010 +0100 + + shadow: Enable shadow by default on SandyBridge + + SandyBridge 2D support is far from complete, so instead of + permanently falling back and always using uncached GTT mapping for + rendering, use the shadow buffer instead. + + Signed-off-by: Chris Wilson + +commit 3e641459f8997f45288cc3cb314e50f2b5a629fd +Author: Chris Wilson +Date: Mon Oct 4 20:31:01 2010 +0100 + + shadow: Disable BLT for SandyBridge + + The blitting code is incorrect for SandyBridge so disable until + the BLT ring is ready. + + Signed-off-by: Chris Wilson + +commit 7c7294ec00d6c3a454a17a1b9983d14d0655162c +Author: Chris Wilson +Date: Mon Oct 4 11:56:27 2010 +0100 + + shadow+dri2: Allow dri2 to be independently enabled with shadow + + To enable DRI we create GEM buffers for the client to render into with + hardware acceleration. In order to maintain coherency between any 2D + render operations with the independent 3D clients (this includes the + reading of 2D rasterisation by the direct rendering client, e.g. + compiz using texture_from_pixmap) we need to replace the shadow pixmap + with the GTT mapping. Therefore 2D rendering to a DRI buffer will be to + uncached memory and thus penalised -- but the direct rendering clients + will have full hardware acceleration. + + Signed-off-by: Chris Wilson + +commit 16a5d0ee3ca4d41af6a6876a8baf81e3f715781d +Author: Chris Wilson +Date: Mon Oct 4 11:21:17 2010 +0100 + + shadow: Map the scanout directly on i8xx + + Even with the minimal use of the BLT to copy from the GTT shadow to the + GTT scanout, i830 was still hanging. Just write to the scanout directly. + + Signed-off-by: Chris Wilson + +commit 516d235c5b3bd51e9533925140d95d3b4533129c +Author: Chris Wilson +Date: Mon Oct 4 11:10:57 2010 +0100 + + Split shadow handling routines to their own file. + + This is about to get messy, so separate out the shadow from the normal + code. + + Signed-off-by: Chris Wilson + +commit 455f2939a661764ebb8d1747d44e16a0a8937808 +Author: Chris Wilson +Date: Sat Oct 2 13:32:58 2010 +0100 + + Do not claim the PCI device if !KMS + + By returning FALSE whilst probing if we can't find a KMS driver, we + allow X to fallback to trying the VESA driver -- rather than failing. + + The initial idea for this was by Julien Cristau. + + Reported-by: Julien Cristau + Signed-off-by: Chris Wilson + +commit 97fea2fd0c36d78f4e940b124a7886c4a3f3dfc7 +Author: Chris Wilson +Date: Sat Oct 2 10:05:59 2010 +0100 + + legacy/i810: Remove pVisualConfigs + + Completely unused pulling in an undesired glxproto dependency. + + Reported-by: Cyril Brulebois + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30554 + Signed-off-by: Chris Wilson + +commit 8784c4f5a1524fb979b00c7ce7981cbc1dcf0ec0 +Author: Chris Wilson +Date: Fri Oct 1 21:40:36 2010 +0100 + + video: Disable TextureAdaptor for Sandybridge + + The acceleration code does not yet exist, so we try to use gen4 shaders + which hangs the chip and makes everybody upset. Disable it until such a + time as support is written for Sandybridge XVideo. + + Reported-by: Matthias Hopf + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30500 + Signed-off-by: Chris Wilson + +commit 9f232ad67c72b7869dcd112207bc41dc01d7d104 +Author: Carl Worth +Date: Thu Sep 30 08:45:49 2010 -0700 + + Increment version to 2.13.0 + + For the new, major release. + +commit 99ec9bb0f1eaf2e5c04614957a51624a928526e5 +Author: Carl Worth +Date: Thu Sep 30 08:45:15 2010 -0700 + + Add release notes for the 2.13.0 release. + + Which is functionalliy identical to 2.12.902. + +commit 345c963e443ec325f1ff530512a356ddb318ff70 +Author: Zhenyu Wang +Date: Thu Sep 30 10:58:49 2010 +0800 + + Always use tiling on Sandybridge + + Sandybridge requires kind of buffer must be tiling, like depth. + And we would or have all tiling cases handled fine. So not allow + user to turn off tiling on Sandybridge+ may be fine. + + Signed-off-by: Zhenyu Wang + +commit d4c013cb9d92d2959c9a98eca20e43ab14ae22e3 +Author: Carl Worth +Date: Tue Sep 28 20:49:52 2010 -0700 + + Increment version to 2.12.902 + + Just before making the 2.12.902 (2.13-rc2) snapshot. + +commit 35e7da7df0b286b5168a85d540cc9fdf55c1cae6 +Author: Carl Worth +Date: Tue Sep 28 20:49:10 2010 -0700 + + Add release notes for the 2.12.902 snapshot. + + Summarizing the 5 recent changes to the driver. + +commit 5704955538f59a2b7a5eff67cc23953d2f27d523 +Author: Carl Worth +Date: Tue Sep 28 20:44:40 2010 -0700 + + Fix to depend on the (just-released) libdrm >= 2.4.22 + + With libdrm < 2.4.22, the compilation of xf86-video-intel would fail + due to an undefined DRM_MODE_CONNECTOR_eDP. We now ensure that a + sufficiently new libdrm is available before compiling. + +commit 40c9d180bf43af84ae05d88e993deedf76e263e6 +Author: Chris Wilson +Date: Sun Sep 26 23:09:04 2010 +0100 + + Retry framebuffer allocation if first attempt fails. + + If we are tiled, we may fail the allocation due to an EIO and so not + being able to set tiling. Try again with an untiled request in this + case. + + Signed-off-by: Chris Wilson + +commit 537e73f3f935b917f2f5f9b51499cb29d65e3889 +Author: Chris Wilson +Date: Fri Sep 24 17:37:41 2010 +0100 + + Disable dri2 after forcing fallbacks + + If we force fallbacks, then we will only create pixmaps in system + memory, preventing DRI2 from passing valid bo names to the clients. In + this case, they will just fallback to swrast. If we disable DRI2 after + forcing fallbacks (e.g. regenerating after a GPU hang or explicitly + disabled with the shadow buffer) then it is simpler just to disable the + extension and allow mesa to use pure swrast. + + Reported-by: Julien Cristau + Signed-off-by: Chris Wilson + +commit b84925b9c0842ba4dfa3481c09d3a80f84db4838 +Author: Matthias Hopf +Date: Tue Aug 17 18:05:02 2010 +0200 + + Make driver compile for 1.6 Xserver series again. + + Signed-off-by: Matthias Hopf + +commit 99f8d68d3dbc54fdd7de4a6df546cfa89422a0c2 +Author: Chris Wilson +Date: Wed Sep 22 12:34:00 2010 +0100 + + display: Refactor is_panel() + + Signed-off-by: Chris Wilson + +commit 4ba27e1f2198fc10a1dd268ed9f137bac6e80086 +Author: Carl Worth +Date: Tue Sep 21 17:43:01 2010 -0700 + + Bump version to 2.12.901 + + Just prior to pushing out this new snapshot. + +commit 334265fa5ef18405bd8c897343fff49ad53f5fce +Author: Carl Worth +Date: Tue Sep 21 17:42:21 2010 -0700 + + NEWS: Add notes for the 2.12.901 snapshot + + (Otherwise known as rc1 for 2.13) + +commit bfba6d6148b938588ffbefdf04f4e71683c66dfd +Author: Krzysztof Halasa +Date: Tue Sep 21 22:56:26 2010 +0100 + + Allow interlaced modes. + + This may not the best method, but it should be a good base on which to + build... + + Signed-off-by: Chris Wilson + +commit f63c7df6866fed61551d39209b1a262e2a0c4b28 +Author: Zhenyu Wang +Date: Fri Sep 17 16:39:12 2010 +0800 + + Disable swap buffer wait on Sandybridge + + MI_LOAD_SCAN_LINE_INCL command is not available on sandybridge. + I haven't got reply on any substitution for it, so turn it off for now. + + Signed-off-by: Zhenyu Wang + +commit 55b5fe888002258dd863d41977bfbfcf1a922179 +Author: Chris Wilson +Date: Thu Sep 16 16:50:13 2010 +0100 + + Add alternate pci-id for B43 + + Confirmed by http://en.wikipedia.org/wiki/Intel_GMA + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30221 + Signed-off-by: Chris Wilson + +commit 08c2caca48323d6d5701dcef3486f850619d7905 +Author: Chris Wilson +Date: Sun Sep 12 12:34:51 2010 +0100 + + uxa: Apply source clipping to blits + + Yes, this should be done in the higher layers. Yes, I have written code + to that. No, it is not ready, hence add the sanity check to the + SRC_COPY_BLT. + + This isn't the first report that I've seen, but will be the last. + + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30120 + Reported-by: rezbit.hex@gmail.com + Signed-off-by: Chris Wilson + +commit ae160d7fbfc79e78dad8702efcc55d9c0c25ff67 +Author: Chris Wilson +Date: Fri Sep 10 13:19:12 2010 +0100 + + shadow: Simply modify the Screen pixmap header + + This is a slightly less risky strategy than having to remember to update + all pointers to the old Screen pixmap. + + Signed-off-by: Chris Wilson + +commit 0515256490d5bcd55f85af83b84918d1bfe7f8f8 +Author: Chris Wilson +Date: Fri Sep 10 00:08:58 2010 +0100 + + display: Free the EDID blob after we copy it to the output, not before. + + Signed-off-by: Chris Wilson + +commit 2b96c18165d713cd6781dbf217ec33e11cc961bc +Author: Chris Wilson +Date: Wed Aug 25 12:56:43 2010 +0100 + + Enable a shadow buffer and disable GPU acceleration. + + An attempt to workaround the incoherency in gen2 chipsets, we avoid + using dynamic reallocation as much as possible. + + The first step is to disable allocation of pixmaps using GEM and simply + create them in system memory without a backing buffer object. This + forces all rendering to use S/W fallbacks. + + The second step is to allocate a shadow front buffer and assign that to + the Screen pixmap. This ensure that the front buffer remains in the GTT + and pinned for scanout. The shadow buffer will be rendered to in the + normal fashion via the Screen pixmap, and be marked dirty. In the block + handler, the dirty shadow buffer is then blitted (using the GPU) over + the front buffer. This should completely avoid having to move pages + around in the GTT and avoid incurring the wrath of those early chipsets. + Secondly, performance should be reasonable as we avoid the ping-pong + caused by the small aperture and weak GPU forcing software fallbacks. + + Signed-off-by: Chris Wilson + +commit 0fa4321a765126228170ecb9536f32c134886d51 +Author: Jesse Barnes +Date: Tue Sep 7 13:56:16 2010 -0700 + + KMS: initialize backlight support for eDP panels too + + Since being able to control the backlight is handy. + + Signed-off-by: Jesse Barnes + +commit f56c839f30ec39ea22bbf6a7fda4cefd7cbfbfc2 +Author: Jesse Barnes +Date: Tue Sep 7 13:53:47 2010 -0700 + + KMS: rename LVDS fields to reflect actual usage + + These are used for panels, not just LVDS connections, so name them as such. + + Signed-off-by: Jesse Barnes + +commit 0d26d950fdada1f59dc6cb31fe2f03004825f773 +Author: Jesse Barnes +Date: Tue Sep 7 13:46:58 2010 -0700 + + KMS: add fake EDID on eDP too + + This gives us a few more standard modes on eDP panels with just a simple + fixed timing in the VBT, just like on older, LVDS attached panels. + + Fixes FDO bug https://bugs.freedesktop.org/show_bug.cgi?id=30069. + + Reviewed-by: Chris Wilson + Tested-by: Manoj Iyer + Signed-off-by: Jesse Barnes + +commit 273d34fbc43e54a8539fbe7efc1dca66bbb4e6dc +Author: Chris Wilson +Date: Tue Sep 7 12:57:04 2010 +0100 + + display: Query current level after finding max value. + + The current backlight value is clamped to the valid range [0, max] and + so as we queried the value before setting the max, we forced the current + backlight to 0 and so set it to be zero on initialising the display. + + Fixes: + + Bug 30063 - start X will modify brightness value to zero + https://bugs.freedesktop.org/show_bug.cgi?id=30063 + + which is a regression due to 38f940dfea494d3093236f065392c431be06ae6e. + + Signed-off-by: Chris Wilson + +commit 53767cc0d0a58d36cd445da3a31c65b349eebbba +Author: Zhenyu Wang +Date: Tue Sep 7 14:17:05 2010 +0800 + + Add more sandybridge graphics device ids + + New ids for GT2 and GT2+ on desktop and mobile sandybridge, and + server sandybridge device ids. + +commit 00f6af2c8ec899258ffab60dc2d9d80c4d9daec8 +Author: Chris Wilson +Date: Sat Sep 4 18:45:11 2010 +0100 + + display: Set MONITOR_EDID_COMPLETE_RAWDATA for large EDIDs + + Quoting Adam Jackson: + + "But the X driver looks like + it never sets MONITOR_EDID_COMPLETE_RAWDATA, which means the X core + doesn't know that any sections beyond the first are present, so it won't + ever hand back more than 128 bytes to clients. Boo." + + This patch is based on his. + + Signed-off-by: Chris Wilson + +commit 501e78b0095b00a635dc1dc182fc132f14f08f22 +Author: Chris Wilson +Date: Sat Sep 4 12:37:39 2010 +0100 + + Force use of GTT and fence registers for mapping tiled objects + + If the buffer object is tiled, we need to use the fence registers to + perform the appropriate untiling for CPU access. Ensure that we always + take this path for tiled objects, regardless of their size. + + Signed-off-by: Chris Wilson + +commit b7a8087fbc5cbd944f8345b8a098270c1f63ebab +Author: Chris Wilson +Date: Wed Aug 25 15:44:20 2010 +0100 + + Revert "Leave adjustment of backlight to the driver." + + This reverts commit 9c3e34703dcdc2155faeb2c1886930def19d9989. + + This commit is not ready, as first the driver needs to handle all + controllers, especially those that ignore the BLC and require their own + interface. Fortunately, by moving that discovery into the kernel - where + it just means finding which ACPI device is attached to the video and has a + backlight interface - the userspace code should become much more sane, + and work even with multi-gpu, multi-lid systems. + + But that is for tomorrow. + +commit 68a5ad497b557ab9e8bff301098ea78c84d385a2 +Author: Chris Wilson +Date: Wed Aug 25 14:59:04 2010 +0100 + + uxa: Fallback if faced with large A1 glyphs. + + Rather than assert, we should fixup the use of large A1 glyphs. However, + the simplest approach is to simply fallback to s/w. + + Fixes: + + Bug 29430 - [UXA] Crash due assert (uxa_pixmap_is_offscreen(src_pixmap)); + https://bugs.freedesktop.org/show_bug.cgi?id=29430 + + Signed-off-by: Chris Wilson + +commit 9c3e34703dcdc2155faeb2c1886930def19d9989 +Author: Chris Wilson +Date: Sun Aug 22 21:27:45 2010 +0100 + + Leave adjustment of backlight to the driver. + +commit 104cd0554bde1d109a54db7a93700d5edfabd914 +Author: Zhenyu Wang +Date: Mon Aug 23 09:48:22 2010 +0800 + + Add sandybridge D0 support + + Signed-off-by: Zhenyu Wang + +commit 271dda84be2f81b32dbe5947e64f5558a89e385e +Author: Chris Wilson +Date: Sun Aug 22 19:57:24 2010 +0100 + + display: Use the native intel backlight controller + + If the i915 driver exposes a native ACPI interface to modify the panel + backlight use it in preference to the generic interfaces. On multi-GPU + systems, the panel backlight is meant to be connected via the IGP and + this ensures that we always find the right interface. + + Fixes: + + Bug 29273 - XORG Intel driver chooses wrong acpi_video to control + brightness in multi-GPU system + https://bugs.freedesktop.org/show_bug.cgi?id=29273 + + Signed-off-by: Chris Wilson + +commit 42312bbd8c9cbadf0adc4556b76987857d105bd9 +Author: Chris Wilson +Date: Sun Aug 22 09:54:18 2010 +0100 + + Remove accel_pitch_alignment + + This has to be 64 on all generations currently, so replace the variable + with a constant. + + Signed-off-by: Chris Wilson + +commit 7f86e5b5da88201e5443e26619c35a1a9745cf68 +Author: Matt Turner +Date: Sat Aug 21 17:32:25 2010 -0400 + + Replace ROUND_* macros with ALIGN. + + Signed-off-by: Matt Turner + Signed-off-by: Chris Wilson + +commit b611bced15c30f7bcd03106ce90668b684c1ada6 +Author: Matt Turner +Date: Sat Aug 21 17:32:24 2010 -0400 + + Use ALIGN macro instead of open coding it. + + Signed-off-by: Matt Turner + Signed-off-by: Chris Wilson + +commit 8b04b350a983b89eb2d741f55baa297a933ac6ea +Author: Chris Wilson +Date: Thu Aug 19 20:05:08 2010 +0100 + + Open-code DRICreatePCIBusID() + + During -configure we would attempt to query the availablility of KMS + before the DRI module was loaded, thus we were unable to create a valid + bus identifier and so the query failed and we disowned the device. + + Fixes: + + Bug 29611 - Xorg -configure fails + https://bugs.freedesktop.org/show_bug.cgi?id=29611 + + Reported-by: Sergey Samokhin + Signed-off-by: Chris Wilson + +commit c882f6a22a862c1664c375e05e5e6fc4bdb04edb +Author: Chris Wilson +Date: Wed Aug 18 10:21:22 2010 +0100 + + Move registration of vsync fd from pre-init to screen-init + + Marty Jack reported an issue he found where the page-flipping handler + was being lost on server reset. This results in the swap completion + notification being lost, with the sporadic hang of full screen + applications like Compiz, flash and even glxgears! + + Fixes: + + Bug 29584 - Server in compute loop + https://bugs.freedesktop.org/show_bug.cgi?id=29584 + + There are also several possibly related bugs with similar symptoms, i.e. + OpenGL applications hanging on missed swap notifications. + + Reported-by: Marty Jack + Signed-off-by: Chris Wilson + Cc: Keith Packard + +commit 19c48d3b3f33582baa87a9b3a9189e320e4cea45 +Author: Chris Wilson +Date: Mon Aug 9 10:13:58 2010 +0100 + + display: outputs are enabled automatically by KMS + + When an output is attached to a crtc and that crtc is enabled, the + output is automatically enabled so we can remove the redundant manual + dpms on. + + Signed-off-by: Chris Wilson + +commit 6304cb048c745be81dae13f1d936996e04eaa530 +Author: Chris Wilson +Date: Thu Aug 5 18:13:55 2010 +0100 + + display: Minor cleanup for adding extra LVDS modes + + Signed-off-by: Chris Wilson + +commit 41ae9564350cba8ac9f040f22bad8740e08e14c4 +Author: Chris Wilson +Date: Thu Aug 5 18:13:30 2010 +0100 + + display: Refactor EDID attachment to output. + + Signed-off-by: Chris Wilson + +commit a8919ab2967a8425e1cdc04b73702ce534f6abf0 +Author: Chris Wilson +Date: Thu Aug 5 09:59:22 2010 +0100 + + Revert "display: Cache whether we have probed for an EDID" + + Dave Airlie advised that hotplug detection can be unreliable and that + mode caching, in general, should be done in the kernel in any case. + + This reverts commit 622e600069ab0efd22586c7a71eecbd4baf21c40. + +commit 622e600069ab0efd22586c7a71eecbd4baf21c40 +Author: Chris Wilson +Date: Wed Aug 4 09:57:12 2010 +0100 + + display: Cache whether we have probed for an EDID + + Remember for the detection cycle whether we have already probed for the + EDID -- as this can be slow. + + Signed-off-by: Chris Wilson + +commit a6a707ca13097b85b319283b3a174b1986056ab8 +Author: Chris Wilson +Date: Wed Aug 4 09:54:28 2010 +0100 + + display: Embed the lvds size into the connector + + Remove one very common allocation. + + Signed-off-by: Chris Wilson + +commit 6c7d105ccae32fba49a07a03b726cc3fe2de3d27 +Author: Chris Wilson +Date: Wed Aug 4 09:51:34 2010 +0100 + + display: Handle cursor error paths. + + Check that the cursor was allocated before freeing. + + Signed-off-by: Chris Wilson + +commit 38f940dfea494d3093236f065392c431be06ae6e +Author: Chris Wilson +Date: Wed Aug 4 09:50:14 2010 +0100 + + display: Tidy backlight initialisation + + Mostly whitespace and a single error-code fix. + + Signed-off-by: Chris Wilson + +commit 2b7263b771d94401cb4ea6cbf4dc7a295eeda7c0 +Author: Chris Wilson +Date: Wed Aug 4 09:46:01 2010 +0100 + + display: Check for buffer overrun in output name lookup. + + The kernel may know about more types than we do, so protect ourselves + from reading from beyond the end of the string array. + + Signed-off-by: Chris Wilson + +commit 56629166915155628e70e6ec8052c0d220a8bb68 +Author: Dave Airlie +Date: Wed Aug 4 15:35:41 2010 +1000 + + intel: add output names for later additions to kernel + +commit fe7dee7fe1cf12665bc5ba3923cd1a8f74cbbe57 +Author: Chris Wilson +Date: Sun Aug 1 14:15:09 2010 +0100 + + Remove the final references to the drmmode prefix + + In particular fix the compile regression for intel_do_pageflip(). + + Signed-off-by: Chris Wilson + +commit 4f8b279f32cfda0f3b8fa1542b3fe00051520012 +Author: Chris Wilson +Date: Sun Aug 1 12:35:57 2010 +0100 + + intel_display: Miscellaneous tidy + + A mixture of whitespace and closing of leaks on error paths. + + Signed-off-by: Chris Wilson + +commit db7cd7b9f0ce8e435c121071eaadf8e6dcebf9e8 +Author: Chris Wilson +Date: Sun Aug 1 11:25:42 2010 +0100 + + Rename drmmode_display to intel_display + + And fixup all the drmmode_* functions to have an intel prefix and + categorise those into intel_mode, intel_crtc, intel_output and + intel_property so that the functions are a little more self-descriptive + and, more importantly, are consistent. + + Signed-off-by: Chris Wilson + +commit 0be3e95c844247746742805830860ace9f546d99 +Author: Kristian Høgsberg +Date: Fri Jul 30 09:39:58 2010 -0400 + + Remove explicit batchbuffer submit in DRI2 copyregion + + Now that we submit from the flush callback chain, we know we'll always + submit before the client receives the reply or event that blocks it from + rendering the next frame. + +commit 69d65f9184006eac790efcff78a0e425160e95aa +Author: Kristian Høgsberg +Date: Thu Jul 29 18:31:48 2010 -0400 + + Submit batch buffers from flush callback chain + + There are a few cases where the server will flush client output buffers + but our block handler only catches the most common (before going into select). + If the server flushes client buffers before we submit our batch buffer, + the client may receive a damage event for rendering that hasn't happened yet. + + Instead, we can hook into the flush callback chain, which the server will + invoke just before flushing output. This lets us submit batch buffers + before sending out events, preserving ordering. + + Fixes 28438: [bisected] incorrect character in gnome-terminal under compiz + https://bugs.freedesktop.org/show_bug.cgi?id=28438 + + Signed-off-by: Kristian Høgsberg + +commit b68d4fcab5d671946c187947f5d00aedff939852 +Author: Chris Wilson +Date: Wed Jul 28 13:41:41 2010 +0100 + + drmmode: Only treat a backlight as connected if it has a non-zero max + + Optimistically might help + https://bugs.freedesktop.org/show_bug.cgi?id=29273 + + Signed-off-by: Chris Wilson + +commit 938ef4eaec0e406e198105d866f6d2a1be5e0ef8 +Author: Kristian Høgsberg +Date: Wed Jul 28 07:57:42 2010 -0400 + + legacy: Remove long gone use of GlxSetVisualConfigs() + + This removes the last dependeny on anything GL/GLX in the driver. + +commit fba6651a92af76d7a8d034e1acfdad5023cd311c +Author: Kristian Høgsberg +Date: Tue Jul 27 12:59:39 2010 -0400 + + Drop use of GL types in the driver + + Still used in i810 for building the glx visuals. + +commit 34b9d45be6cb0c42f031677a0bda8a5013472ae8 +Author: Jesse Barnes +Date: Tue Jul 27 09:10:04 2010 -0700 + + Revert "configure.ac: add xi and gl requirements" + + This reverts commit d580fa82a1cf339d2d1fd1055d137c0b23cd04f3. + + Oops, these should be server or other package dependencies, we don't + actually need them for xf86-video-intel. + +commit d580fa82a1cf339d2d1fd1055d137c0b23cd04f3 +Author: Jesse Barnes +Date: Mon Jul 26 16:44:19 2010 -0700 + + configure.ac: add xi and gl requirements + + Could probably be earlier versions, but having these here makes packaging + easier. + +commit f46a8dfce59013ce593c15f7166598d0fff9198f +Author: Daniel Vetter +Date: Mon Jul 26 23:02:02 2010 +0200 + + video: kill do { ... } while (ret != -EINTR) loops + + Chris Wilson likes to sprinkle these all over, but in this + case it's just misleading. libdrm already does this for us. + + Signed-off-by: Daniel Vetter + +commit 1cb69b9a77b7afbb4358757556065e10a6b15ea8 +Author: Daniel Vetter +Date: Mon Jul 26 23:00:20 2010 +0200 + + video: kernel overlay needs triple buffering + + The kernel overlay code does asynchronous overlay flips. So keep + onto two old buffers, for otherwise the rendering of the next + frame might overwrite the contents of the currently still displaying + one. With ~25fps videos and ~50 Hz screens that's rather unlikely, + still, fix it. + + Signed-off-by: Daniel Vetter + +commit 68df6b2790891683ee2e58daaad34ef17ae344f5 +Author: Gaetan Nadon +Date: Fri Jul 23 17:39:37 2010 -0400 + + simplify Makefile as per-target compilation flags are not needed + + Per-target compilation flags (libIntelXvMC_la_CFLAGS) are required + when multiple targets which require different compiler flags, + are build in the same makefile. + + Automake issues a command with -c and -o flags which not all compilers + support. The object fles are prefixed with libIntelXvMC_la. + The macro AM_PROG_CC_C_O must then be used to provide this feature + on compilers that do not have it. If not, a warning is issued at make time. + + This macros checks for compiler support and if missing, uses a "compile" + script it generates in the package root directory. + + Currently the driver uses per-target flags but the macro is missing. + Rather than adding the macro, this patch stops using per-target flags + by using the AM_CFLAGS variable for all targets in the makefile, as + there is only one. + + Acked-by: Chris Wilson + Signed-off-by: Gaetan Nadon + +commit 0ae30b6d1f4f6c2f2db9443f1027ea41849ad087 +Author: Gaetan Nadon +Date: Wed Jul 21 16:49:04 2010 -0400 + + config: add comments for main statements + +commit b12b2219677d94933774955b50545efceff57279 +Author: Gaetan Nadon +Date: Wed Jul 21 16:07:00 2010 -0400 + + config: replace deprecated use of AC_OUTPUT with AC_CONFIG_FILES + + Signed-off-by: Gaetan Nadon + +commit 8b2d65da41461735b1138fdd6e0efc96419cd815 +Author: Gaetan Nadon +Date: Wed Jul 21 14:37:41 2010 -0400 + + config: replace deprecated AC_HELP_STRING with AS_HELP_STRING + + Signed-off-by: Gaetan Nadon + +commit 3feeef5294b1a2df05a25f4f4eb6400be6cc4ee1 +Author: Gaetan Nadon +Date: Wed Jul 21 14:05:22 2010 -0400 + + config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS + + Signed-off-by: Gaetan Nadon + +commit 74a828e286c46473b8edf6de32c1989c052dd82c +Author: Gaetan Nadon +Date: Wed Jul 21 09:27:42 2010 -0400 + + config: complete AC_INIT m4 quoting + + Signed-off-by: Gaetan Nadon + +commit 33ec66d7006e2a7e287fd77c53a31db49220591a +Author: Gaetan Nadon +Date: Tue Jul 20 21:54:11 2010 -0400 + + config: remove unrequired AC_SUBST([DRI_CFLAGS]) + + This macro is called by PKG_CHECK_MODULES + + Signed-off-by: Gaetan Nadon + +commit b20b8ac937505310fbe68f07e42cafe4ba88da76 +Author: Gaetan Nadon +Date: Tue Jul 20 20:24:42 2010 -0400 + + config: remove unrequired AC_HEADER_STDC + + Autoconf says: + "This macro is obsolescent, as current systems have conforming + header files. New programs need not use this macro". + + Signed-off-by: Gaetan Nadon + +commit 9fe5169fffeee10b1262f160a15c11c283e2faa7 +Author: Gaetan Nadon +Date: Tue Jul 20 19:41:31 2010 -0400 + + config: remove AC_PROG_CC as it overrides AC_PROG_C_C99 + + XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls + AC_PROG_C_C99. This sets gcc with -std=gnu99. + If AC_PROG_CC macro is called afterwards, it resets CC to gcc. + + Signed-off-by: Gaetan Nadon + +commit e6b8811e5bb30e2cd4e35b1fe84d69f18a73ee0e +Author: Gaetan Nadon +Date: Tue Jul 20 18:45:19 2010 -0400 + + config: update AC_PREREQ statement to 2.60 + + Unrelated to the previous patches, the new value simply reflects + the reality that the minimum level for autoconf to configure + all x.org modules is 2.60 dated June 2006. + + ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz + + Signed-off-by: Gaetan Nadon + +commit 2d85efaa36791bd441f069b612ee86387353d1ed +Author: Gaetan Nadon +Date: Tue Jul 20 16:15:29 2010 -0400 + + config: upgrade to util-macros 1.8 for additional man page support + + Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS + The value of MAN_SUBST is the same for all X.Org packages. + +commit 142ffa287236adbc3c5f6ead46c63c4c541ace0c +Author: Chris Wilson +Date: Thu Jul 22 16:42:26 2010 +0100 + + video/i915: ValidateGC after setting clip. + + Order is important. And ensure that the scratch GC is performing clip by + children. + + Fixes: + + Bug 29213 - video artifacts if used dualscreen mode + https://bugs.freedesktop.org/show_bug.cgi?id=29213 + + Signed-off-by: Chris Wilson + +commit c57840b272ba88fddf22484929608431879b0fab +Author: Chris Wilson +Date: Wed Jul 21 09:06:06 2010 +0100 + + uxa: Check for failed pixmap allocation + + Fixes: + + Bug 29187 - crash in intel_drv + https://bugs.freedesktop.org/show_bug.cgi?id=29187 + + Backtrace: + 0: /usr/bin/X (xorg_backtrace+0x28) [0x466808] + 1: /usr/bin/X (0x400000+0x67c79) [0x467c79] + 2: /lib/libpthread.so.0 (0x7ff19b297000+0xef60) [0x7ff19b2a5f60] + 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ff197986000+0x34684) => uxa/uxa-render.c:841 + + Signed-off-by: Chris Wilson + +commit 7a4bfaf42412f373bbc8ebe1536018dcacde7436 +Author: Dave Airlie +Date: Tue Jul 20 11:30:44 2010 +1000 + + intel: respect tiling disable. + + For testing purposes its nice to know tiling isn't being used anywhere. + + Signed-off-by: Dave Airlie + +commit d48d584a822ae5adae64f6d5f09faa4ac9b8de73 +Author: Chris Wilson +Date: Thu Jul 15 14:37:59 2010 +0100 + + video: Free the buffers immediately after turning off. + + Signed-off-by: Chris Wilson + +commit 24bdfe0d5eb4e890e9c63bbb4617efaa0768ab7f +Author: Chris Wilson +Date: Thu Jul 15 13:54:04 2010 +0100 + + video: Reuse the old buffers. + + After passing the new buffer to the kernel, the old buffer is unpinned + and becomes available for re-use. So keep hold of the old buffer and + swap after a PutImage. This greatly reduces the amount of CPU time + consumed by the kernel on behalf of the video overlay -- by only + allocating two buffers for an entire sequence, we avoid clflushing and + page allocation on every frame. + + Signed-off-by: Chris Wilson + +commit 2267e5928bd90a6997970584462bd97df447e819 +Author: Chris Wilson +Date: Tue Jul 13 10:36:34 2010 +0100 + + Workaround a broken container_of define in list.h + +commit 798c3a5fc6e3d44c9b94e6bc4e72385a10939f52 +Author: Chris Wilson +Date: Tue Jul 13 10:30:33 2010 +0100 + + Teardown the bufmgr on shutdown as well. + + Signed-off-by: Chris Wilson + +commit b2e98227d11a60e90b3ea518f14962f2764ffa68 +Author: Chris Wilson +Date: Tue Jul 13 10:15:34 2010 +0100 + + Remove the duplicate drmmode prototypes. + + Signed-off-by: Chris Wilson + +commit 5de1b74d64f807b59c730871d4cb171484db9780 +Author: Chris Wilson +Date: Tue Jul 13 09:34:53 2010 +0100 + + modes: There may be more than one crtc and output... DESTROY THEM ALL! + + In order to cleanup all CRTCs and outputs on shutdown, we need to keep a + list of the individual structures and iterate over that list on + shutdown. + + Also, the output and crtcs are configured just once and not for each + screen generation so move the shutdown to the termination and not on + CloseScreen. Oops. + + Signed-off-by: Chris Wilson + +commit 3a7c25ff8ddd45c9d9eca5cc2228552847ca9e7d +Author: Chris Wilson +Date: Mon Jul 12 19:47:46 2010 +0100 + + video: Apply overlay stride errata for i830 and i845 + + Due to an erratum on these chipsets, the overlay stride must be a + multiple of 256 bytes. + + Signed-off-by: Chris Wilson + +commit 56e5816252afbc7dd555c308ca678fce7ee584cc +Author: Chris Wilson +Date: Mon Jul 12 17:26:37 2010 +0100 + + video: Copy DummyEncoding into each adapter. + + As we use the static DummyEncoding and may attempt to modify it for each + adaptor (on each device), we should use copies instead. + + Signed-off-by: Chris Wilson + +commit e30f0338fbf894fa3fdab20f4f9a97495cd341da +Author: Keith Packard +Date: Thu Jul 1 09:56:40 2010 -0400 + + Destroy screen pixmap on screen close. + + This avoids a memory leak on server reset. + + Signed-off-by: Keith Packard + [ickle: Added comments from Keith that explain the necessity of + destroying the pixmap ourselves and why chaining up in this instance is + not the correct approach.] + Reviewed-by: Chris Wilson + +commit 6e08b0f48f0d6ddaca963de6f4fd3b56f32512c6 +Author: Fernando Carrijo +Date: Thu Jul 1 07:15:22 2010 -0300 + + Purge macro NEED_EVENTS + + Signed-off-by: Fernando Carrijo + Acked-by: Tiago Vignatti + Reviewed-by: Alan Coopersmith + +commit 5ce3f536b7169a1ee9eadf830e61bab230dd7239 +Author: Chris Wilson +Date: Fri Jul 9 14:06:43 2010 +0100 + + drmmode: Destroy the output on shutdown + + Signed-off-by: Chris Wilson + +commit 6ff369cd2602497ee11273b50f76d1a7bf25991d +Author: Chris Wilson +Date: Fri Jul 9 14:00:31 2010 +0100 + + drmmode: Destroy Crtc on screen shutdown + + Should fix: + + Bug 26946 - CRTC cursor BO leak in 2D + https://bugs.freedesktop.org/show_bug.cgi?id=26946 + + Signed-off-by: Chris Wilson + +commit 6fba8c449f61341a98a5ae8d97effa6fd0610fd4 +Author: Chris Wilson +Date: Fri Jul 9 12:12:13 2010 +0100 + + Add support for I854. + + I spotted that the kernel knew of the I854, but the pci-id was never + added to the ddx. + + Signed-off-by: Chris Wilson + +commit 141e88c8730a099a6ca5eab1350c2e53a680cb0d +Author: Chris Wilson +Date: Fri Jul 9 12:11:07 2010 +0100 + + video: forgotten amendment to previous commit. + + An extra sanity check to skip the wait if all clipped... + + Signed-off-by: Chris Wilson + +commit 272d1c14a39c32ade39b5a8b080a891f2b3d6e8e +Author: Chris Wilson +Date: Fri Jul 9 10:41:19 2010 +0100 + + video: apply the crtc box checks from dri. + + The dri code is much more careful in ensuring that the scan lines that + is waits for are valid. Copy this code to video, with a bit of work this + can be refactored, and perhaps even teach dri how to handle rotated + front buffers. + + References: + + Bug 28964 - [i965gm] GPU infinite MI_WAIT_FOR_EVENT while watching video + in Totem + https://bugs.freedesktop.org/show_bug.cgi?id=28964 + + Signed-off-by: Chris Wilson + +commit 75850e824bd66b961b9ce21696d9090169f7b28f +Author: Evan McClain +Date: Thu Feb 25 01:51:42 2010 -0500 + + Add mbp_backlight support. + + Acked-by: Julien Cristau + +commit a2aa4c23f65b03c389c2ba8eac0298dfb205e67d +Author: Dave Airlie +Date: Mon Jul 5 14:02:42 2010 +1000 + + uxa: oops typo in previous commit + +commit feff2ec80eeeba5074d19efcddf4867adf639b4f +Author: Dave Airlie +Date: Mon Jul 5 09:07:08 2010 +1000 + + uxa: don't compare planemask with FB_ALLONES. + + planemask is an unsigned long initialised to ~0, on 64-bit this is not equal + to an (unsigned int)-1. + + Use the macro provided to do this. + + Signed-off-by: Dave Airlie + +commit 7ad9c0bebf2c71db574e0302264859ce53cecd37 +Author: Jesse Barnes +Date: Fri Jul 2 12:39:27 2010 -0700 + + add cscope files to gitignore + +commit afcd41820d7481912b49093670e9d7a4a6a2338f +Author: Chris Wilson +Date: Thu Jul 1 22:14:03 2010 +0100 + + Reduce front buffer stride prior to rejection + + If we reject the front buffer because it has too large a stride, repeat + the allocation using untiled for the cases where we can utilize laxer + hardware restrictions. + + Signed-off-by: Chris Wilson + +commit f8778b66a98d68e622cdf5b2d1fd959c4f7a2b2b +Author: Chris Wilson +Date: Thu Jul 1 21:58:43 2010 +0100 + + drmmode: Add missing newlines at the end of log messages. + + Signed-off-by: Chris Wilson + +commit 690fbd1a64c1e1fd07f7f8a5e39e05a33e4d0721 +Author: Chris Wilson +Date: Thu Jul 1 21:55:04 2010 +0100 + + drmmode: Use a copy of the converted mode on resize + + Avoid a potential use-after-free of the copied mode string by reusing + the converted kernel mode on resize. + + ==19897== Invalid read of size 8 + ==19897== at 0x661C330: ??? (strcpy.S:1308) + ==19897== by 0x8618AE7: drmmode_set_mode_major (drmmode_display.c:293) + ==19897== by 0x8618E6F: drmmode_xf86crtc_resize (drmmode_display.c:1299) + ==19897== by 0x529A77: xf86RandR12ScreenSetSize (xf86RandR12.c:708) + ==19897== by 0x4BD528: ProcRRSetScreenSize (rrscreen.c:301) + ==19897== by 0x42B820: Dispatch (dispatch.c:432) + ==19897== by 0x4254C9: main (main.c:289) + ==19897== Address 0x72e91e0 is 0 bytes inside a block of size 9 free'd + ==19897== at 0x4C23DBC: free (vg_replace_malloc.c:325) + ==19897== by 0x48424F: xf86DeleteMode (xf86Mode.c:1921) + ==19897== by 0x4942B7: xf86ProbeOutputModes (xf86Crtc.c:1572) + ==19897== by 0x5290BB: xf86RandR12GetInfo12 (xf86RandR12.c:1551) + ==19897== by 0x5313AE: RRGetInfo (rrinfo.c:202) + ==19897== by 0x4BCCAA: rrGetScreenResources (rrscreen.c:337) + ==19897== by 0x42B820: Dispatch (dispatch.c:432) + ==19897== by 0x4254C9: main (main.c:289) + + Signed-off-by: Chris Wilson + +commit 772f8236d50725f0b330508616b4f2a9a910662a +Author: Chris Wilson +Date: Wed Jun 30 13:58:05 2010 +0100 + + dri: Handle errors during GetBuffers() gracefully. + + Unwind the array of Pixmaps already allocated and report failure for the + old dri GetBuffers() path. + + Signed-off-by: Chris Wilson + +commit 17884af4eda01c05e7429ed6a195f3e4ceeff892 +Author: Chris Wilson +Date: Mon Jun 28 17:44:45 2010 +0100 + + Repair the damage to 'make distcheck' after splitting out i810 + + Signed-off-by: Chris Wilson + +commit 28c0ca676c47e7e38fabdd9ef24a70bd26701f33 +Author: Chris Wilson +Date: Fri Jun 25 13:40:22 2010 +0100 + + Remove unused inclusion of + + Signed-off-by: Chris Wilson + +commit 2306e675c48bc00a8ca1f4545bb88c97d6ef4fa6 +Author: Chris Wilson +Date: Fri Jun 25 13:32:02 2010 +0100 + + configure: Remove check for unused function, mprotect + + Signed-off-by: Chris Wilson + +commit 6695296ca28da7c4f551b0e80a8d06b557d59a5e +Author: Chris Wilson +Date: Fri Jun 25 13:31:11 2010 +0100 + + configure: Remove unused checks for xext + + Signed-off-by: Chris Wilson + +commit 5c663ce8442bd3b69c96e29061c57cc565fca91d +Author: Chris Wilson +Date: Sun Jun 20 15:01:16 2010 +0100 + + Rename common infrastructure to the intel namespace. + + After splitting out the i810 driver into its own legacy directory, we + can identify the common routines not as i830 but as intel. This + clarifies the code which *is* i830 specific. + + Signed-off-by: Chris Wilson + +commit 797d173a9af12055ba2609293182b616dd673ef4 +Author: Chris Wilson +Date: Sun Jun 20 12:52:10 2010 +0100 + + i810: Move into a legacy directory. + + The driver is still built but is no longer under active development so + move it and supporting files to a new directory. + + Signed-off-by: Chris Wilson + +commit cd61531a78b9a2cbdd6019199c43258f83e6e2ce +Author: Chris Wilson +Date: Sun Jun 20 21:03:44 2010 +0100 + + Remove unused configure option: --enable-video-debug + + Signed-off-by: Chris Wilson + +commit ca16e3133658504b68a6b5c83bb8712899016544 +Author: Carl Worth +Date: Thu Jun 24 14:07:15 2010 -0700 + + Update version to 2.12.0 + + For the imminent 2.12.0 release. + +commit 8caf1564a75d65636d9b7a4da03219bb302bb37b +Author: Carl Worth +Date: Thu Jun 24 14:06:43 2010 -0700 + + NEWS: Add notes for the 2.12.0 release. + + Let it ship! + +commit b58a6a39c1568800938eb0e3ebc7664683b61200 +Author: Chris Wilson +Date: Wed Jun 23 23:56:44 2010 +0100 + + uxa: Fallback to pixman if source is out-of-bounds + + If the source is outside the drawable, then CopyArea will fail to + initialise the source correctly. The simplest fix in this case is to + fallback to pixman to generate the source texture. + + Fixes: + + Bug 28497 - Graphics corruption after opening a specific website + https://bugs.freedesktop.org/show_bug.cgi?id=28497 + + Signed-off-by: Chris Wilson + +commit 6d33e578de4e23336ac69cc3c5d0935a65d4dda1 +Author: Chris Wilson +Date: Wed Jun 23 21:28:50 2010 +0100 + + Limit maximum tiled stride to 8k and untiled to 32k. + + Tiling on gen 2/3 hardware is only supported for pitches up to 8192 + bytes, so above this limit the surface will be untiled and we will no + longer have to comply with the power-of-two pitch alignment. So + disabling tiling for these too wide surface should ~halve the memory + requirement for the full surface. + + Also the absolute limit for the 2D blitter is 32,768 bytes. The + documentation says "up to 32,768 bytes" and my PineView box was + malfunction with a surface stride of 32,768 so set the limit to be + 32,767. + + References: + + Bug 28497 - Graphics corruption after opening a specific website + https://bugs.freedesktop.org/show_bug.cgi?id=28497 + + Signed-off-by: Chris Wilson + +commit 5bf470bd38b1f6a7a540585186a54c9dbbca98f9 +Author: Chris Wilson +Date: Mon Jun 21 22:28:58 2010 +0100 + + i965: Compile fix. + + Oops, I spent more time discussing these flushing bugs than I spent + paying attention to what I was actually doing. + + Signed-off-by: Chris Wilson + +commit 0203cf91b54ee8a7cea8560e559288ee9b6e8554 +Author: Chris Wilson +Date: Mon Jun 21 22:25:08 2010 +0100 + + Do not clear need_mi_flush within the batch. + + This is a situation that should not be possible, need_mi_flush being + true but the list of pending flush pixmaps being clear. However, an + earlier bug in doing just that revealed this minor bug. So for + correctness, be careful not to clear need_mi_flush without emitting a + MI_FLUSH. + + Signed-off-by: Chris Wilson + +commit 5107b6fa26ecfdbdd60b869a86765c9c484db3a2 +Author: Chris Wilson +Date: Mon Jun 21 22:21:58 2010 +0100 + + i965: Mark the render target as dirty within composite_setup() + + The key difference between i965 and earlier, is that the surfaces passed + to the samplers through an indirect table and so the batch and render + target was not being marked dirty by the relocation (since the + relocation only happens within prepare_composite() which may have been + in another batch.) Simply call intel_pixmap_mark_dirty() when binding + the sampler table into the batch to ensure that the dirty is tracked + appropriately. + + Signed-off-by: Chris Wilson + +commit bebd64d82121d2b61893e1d0adebda03f4faea61 +Author: Chris Wilson +Date: Mon Jun 21 22:05:19 2010 +0100 + + Also submit any pending flush for *this* batch in the BlockHander. + + We still need to submit an additional flush if we have further writes + since the last flush. + + Signed-off-by: Chris Wilson + +commit c4d200517755e6b0f48d6c6a6ba8dd0ddc883d8b +Author: Chris Wilson +Date: Mon Jun 21 21:57:21 2010 +0100 + + Only append the pixmap to the flushing list if we are writing to it. + + Signed-off-by: Chris Wilson + +commit c942585098ac84ae461821cbb8f52dedce7a0da1 +Author: Chris Wilson +Date: Mon Jun 21 21:45:04 2010 +0100 + + Emit the flush after a potential draw from the BlockHandler. + + As the batch submit may not trigger further drawing through flushing the + vertices, pass the requirement to emit the flush down to the submission + routine so that the flush can be appended after the final commands. + + Signed-off-by: Chris Wilson + +commit e8783869ad55d337601b6f6a51c02f6576c64f38 +Author: Chris Wilson +Date: Sun Jun 20 00:09:20 2010 +0100 + + uxa: Apply the source offsets to the pixmap source, not target. + + A slight confusion in computing the correction image location resulted + in the application of the source offsets to the pixel location in the + target and not in the source as intended. + + Fixes the visual corruption of the scrollbar in Chromium, and hopefully + the crash reported by Robert Hooker when starting gdm after plymouth. + + Signed-off-by: Chris Wilson + +commit 4b7142baa0b3bf6f38843d06aadc579d8624cefc +Author: Chris Wilson +Date: Sat Jun 19 12:30:23 2010 +0100 + + uxa: Enable SHM pixmaps + + Now with streaming uploads and downloads for composite operations in + place, shared memory pixmaps are no longer that dire performance wise. + With careful use these can in fact be the most efficient means of + transfer between a wholly software renderer in the client and a backing + store. For instance, Chromium renders internally to an ARGB32 image + buffer and uses a shared pixmap to composite dirty regions into the + backing store. Thereby using the GPU to either perform the blit or the + format conversion. Enabling shared pixmaps, reduces our CPU overhead + whilst scrolling by a factor of 5 or so. + + And this is achieved simply by deleting obsolete code! + + Signed-off-by: Chris Wilson + +commit d748f8e6fcebdf5b5b00c90b6c3d519560ee2928 +Author: Chris Wilson +Date: Thu Jun 17 18:29:55 2010 +0100 + + uxa: Use accelerated get_image for copying to !offscreen + + Signed-off-by: Chris Wilson + +commit 78ee25f005fac9e9cc85425aa3fca8c396d015ea +Author: Chris Wilson +Date: Thu Jun 17 18:37:32 2010 +0100 + + uxa: Match depth 30 to format. + + Signed-off-by: Chris Wilson + +commit af5c4fc96db56a14bf6347774d8e8f23b38c5967 +Author: Chris Wilson +Date: Sat Jun 19 13:36:20 2010 +0100 + + uxa: Check for allocation failure. + + Check for the NULL Picture prior to passing it to the backends for + inspection. + + Signed-off-by: Chris Wilson + +commit be55066c6481b4c5e2cd39ef1c0f3be88cae0c93 +Author: Chris Wilson +Date: Thu Jun 17 14:23:21 2010 +0100 + + i830: Remove domain tracking from pixmaps. + + The 4 integers can be reduced to a single boolean value, so do so. + + Signed-off-by: Chris Wilson + +commit c187da9a24e98cbdf86f0f0dfbdcd9025c8a4c76 +Author: Chris Wilson +Date: Wed Jun 16 13:16:28 2010 +0100 + + i830: GetImage acceleration. + + The presumption is that we wish to keep the target hot, so + copy to a new bo and move that to the CPU in preference to + causing ping-pong of the original. + + Also the gpu is much faster at detiling. + + Before (PineView): + 400000 trep @ 0.1128 msec ( 8860.0/sec): GetImage 10x10 square + 18000 trep @ 1.3839 msec ( 723.0/sec): GetImage 100x100 square + 800 trep @ 30.0987 msec ( 33.2/sec): GetImage 500x500 square + + After: (PineView) + 180000 trep @ 0.1478 msec ( 6770.0/sec): GetImage 10x10 square + 60000 trep @ 0.4545 msec ( 2200.0/sec): GetImage 100x100 square + 4000 trep @ 8.0739 msec ( 124.0/sec): GetImage 500x500 square + + Signed-off-by: Chris Wilson + +commit 0e0101758438debf98f989d815989b45e78cf5f6 +Author: Chris Wilson +Date: Tue Jun 15 12:48:57 2010 +0100 + + i830: Tidy i830_uxa_put_image() + + Use a single code path to upload the image data after selecting the + right bo, and take advantage of pwrite() when possible. + + Fixes: + + Bug 28569 - [i965] IGN's flash-based video player crashes X + https://bugs.freedesktop.org/show_bug.cgi?id=28569 + + Bug 28573 - [i965] Fullscreen flash and windowed SDL games fail to + update the screen + https://bugs.freedesktop.org/show_bug.cgi?id=28573 + + Reported-and-tested-by: Brian Rogers + Signed-off-by: Chris Wilson + +commit 2ff7a2fc9d939554502e9adec89cae5597a9e82c +Author: Chris Wilson +Date: Thu Jun 17 13:56:30 2010 +0100 + + i915: Force the emission of BUF_INFO on every composite_setup + + We should be able to eliminate these as the drawable remains unchanged. + However, the implicit flush of BUF_INFO fixes the rendering in KDE. + Alternatively, we need an MI_FLUSH | INHIBIT_RENDER_CACHE_FLUSH between + composites. (Note that it is not stale cache data causing the rendering + corruption and that a pipelined flush is not sufficient either.) Also, + having tried varies points at which to flush, the only place where the + flush is effective seems to be between composite operations - that is a + flush after 2D is not sufficient. + + Reported-by: Vasily Khoruzhick + Reported-by: Clemens Eisserer + Signed-off-by: Chris Wilson + +commit a25573d5c47ebea34c076075e1993233d7db2b4f +Author: Chris Wilson +Date: Tue Jun 15 20:26:19 2010 +0100 + + drmmode: Use the tiled stride for the rotated pixmap. + + After d41684d5459 we now allocate all framebuffers as tiled bo, and so + we must be careful to use the appropriate stride as returned from the + allocation, instead of assuming that it is just an aligned width. + + Fixes: + + Bug 28461 - screen rotation results in corrupted output. + https://bugs.freedesktop.org/show_bug.cgi?id=28461 + + Signed-off-by: Chris Wilson + Reported-by: Till Matthiesen + +commit 23ddcf45344936da2931a3bf25bd187a9ea28344 +Merge: 254bcc4 ffc6897 +Author: Julien Cristau +Date: Tue Jun 15 17:46:52 2010 +0100 + + Merge commit '2.11.901' + +commit 254bcc40fca6ed9aa0b71f2115c654667f16aec6 +Author: Chris Wilson +Date: Tue Jun 15 10:24:40 2010 +0100 + + configure: Bump drm requirement to 2.4.21 + + We depend upon the recent introduction of drm_intel_bo_is_reusable(). + + Signed-off-by: Chris Wilson + Reported-by: Julien Cristau + +commit ffc689767fa56f2c7710e6f396441c3d8a24ea18 +Author: Carl Worth +Date: Mon Jun 14 17:35:20 2010 -0700 + + Update version to 2.11.901 + + For the 2.12 RC1 snapshot we're making now. + +commit 68c8b3f12482489f2e2e8040fd6728f1a2b9e420 +Author: Carl Worth +Date: Mon Jun 14 17:34:38 2010 -0700 + + NEWS: Add notes for 2.11.901 + + This is the 2.12 RC1 snapshot we're making now. + +commit 8899cd03e2e7ee673e8b3b2a9d2873839cdc1bf8 +Author: Carl Worth +Date: Thu Jun 10 15:38:54 2010 -0700 + + Fix to require libdrm 2.4.19 or newer. + + This is necessary for the drm_intel_bo_emit_reloc_fence function which + did not exist in 2.4.16 which is all we were requiring earlier. + +commit 995a4b2b1d09c31672d9258a8ac732dcf9a8fe9f +Author: Chris Wilson +Date: Mon Jun 14 12:15:34 2010 +0100 + + i965: Sanity check ComponentAlpha status in prepare_composite + + Fixes: + + Bug 28446 - Garbled Font with Mathematica 7 + https://bugs.freedesktop.org/show_bug.cgi?id=28446 + + Rewriting the glyphs to render to the destination directly and removing + the more expensive multiple invocations of CompositePicture per picture + was a great performance boost -- except that it needs special handling + in the backend in order to not fallback. Having done so for i915, I + neglected to ensure the sanity checking in i965_prepare_composite() was + sufficient. As it turns out, it was not and so we misrendered CA-glyphs + when rendering directly to the destination. This causes us to fallback + properly, but is a performance regression as we no longer try the 2-pass + magic helper before resorting to s/w. At the moment, I'd rather live + with the temporary regression and fix i965 to do the same magic as i915, + as it critical to fixing the severe performance issues currently + crippling i965, as I believe that this regression only affects the + minority of applications (incorrect, as it turns out, as the glyphs are + overlapping) rendering directly to the destination. + + Signed-off-by: Chris Wilson + +commit 84d65bace521ad80b9bede4ae9e3e2a8d0668b90 +Author: Chris Wilson +Date: Mon Jun 14 11:31:40 2010 +0100 + + Compile fix for alternate list.h from xserver-1.9 + + Signed-off-by: Chris Wilson + +commit 00a54eee8f29ced610ef9d65b077e64bc65655e9 +Author: Gaetan Nadon +Date: Sat Jun 12 20:24:10 2010 -0400 + + COPYING: replace stub file with actual Copyright notices. + + Signed-off-by: Gaetan Nadon + +commit 94217ed5f5a3726db3fad6cac2132d99ed45c154 +Author: Chris Wilson +Date: Sat Jun 12 17:21:44 2010 +0100 + + uxa: Always clip glyphs to destination. + + Even if there is only a single clip rect, since the clip may be smaller + than the drawing rectangle on the destination we need to actually + compute the clipped glyph rectangle. + + Signed-off-by: Chris Wilson + +commit 5a0a8a1cf6d9b0616d6a097e783f2aa318b45736 +Author: Chris Wilson +Date: Thu Jun 10 22:56:34 2010 +0100 + + i830: Limit disabling acceleration following EIO to !i965 + + Following a conversation with Owain G. Ainsworth, it was decided that + the second best approach to handling a wedged GPU was to hope that the + kernel could successfully reset it, which currently is only possible for + i965 and later chipsets. + + The best approach is of course to prevent such hangs from ever occurring + in the first place. + + Signed-off-by: Chris Wilson + +commit 3bf4ca2cdc2493e209bbb9c597bfa17ed7fcf5dc +Author: Chris Wilson +Date: Wed Jun 9 12:02:21 2010 +0100 + + i830: Only emit the disabling GPU error message once. + + But emit the warning about rendering corruption every time for the + transient errors like out-of-memory. + + Signed-off-by: Chris Wilson + +commit 35a12f029005d8f432755fb78f10c9d48ea2f347 +Author: Chris Wilson +Date: Wed Jun 9 11:47:37 2010 +0100 + + Fallback implementation for trapezoids for hung GPUs. + + Signed-off-by: Chris Wilson + +commit 8c1a8d22978f143044cc3cd0ff2ade5736ee9d48 +Author: Chris Wilson +Date: Wed Jun 9 10:03:08 2010 +0100 + + Revert "xp:trapezoids" + + This reverts commit f429fb9d872950705e11171d0e7407fb7673c786. + + An experimental patch I forgot was on my main branch as I was bugfixing. + ARGH! + +commit 994aa1ef571ac2ab05f6588f9068d33b536c7a37 +Author: Chris Wilson +Date: Wed Jun 9 09:59:36 2010 +0100 + + uxa: Handle all-clipped out case with destination glyphs. + + Fixes the crash reported in: + + Bug 28446 - Garbled Font with Mathematica 7 + https://bugs.freedesktop.org/show_bug.cgi?id=28446 + + pDst=0x3d663c0, src_x=0, src_y=0, xDst=142, yDst=112, nlist=0, + list=0x7fffea026580, glyphs=0x7fffea025d88, extents=0x0) + at uxa-glyphs.c:809 + dx = 0 + y1 = 101 + x2 = 150 + x1 = 142 + dy = 0 + y2 = 112 + rects = 0x5491000 + this_atlas = 0x2456d00 + mask_y = 128 + glyph = 0x35933a0 + mask_x = 736 + priv = 0x39309e0 + screen = 0x8d2cc0 + uxa_screen = 0x2443eb0 + src_pixmap = 0x37c29e0 + dst_pixmap = 0x45ddbf0 + localSrc = 0x361a450 + glyph_atlas = 0x2456d00 + x = 142 + y = 112 + n = 18 + nrect = -9975128 + box = {x1 = 23152, y1 = -5630, x2 = 32767, y2 = 0} + __PRETTY_FUNCTION__ = "uxa_glyphs_to_dst" + + Though the meat of that bug regarding the incorrect remains unsolved. + + Signed-off-by: Chris Wilson + +commit f429fb9d872950705e11171d0e7407fb7673c786 +Author: Chris Wilson +Date: Tue Jun 8 10:24:51 2010 +0100 + + xp:trapezoids + +commit 0776a42b70f2de7b7d7d8804046c79442da1cb8a +Author: Chris Wilson +Date: Tue Jun 8 10:43:24 2010 +0100 + + implicit-flush + +commit d41684d54592cf93554a4d6534e7ea74562b1798 +Author: Eric Anholt +Date: Mon Jun 7 11:18:09 2010 -0700 + + Allocate rotate shadow buffers using the usual framebuffer allocator. + + This means we can get tiling on them, which should significantly boost + performance, and also allow for FBC. + +commit b5c9de10ba3a811f312e622b97ee5e601bd3b74f +Author: Eric Anholt +Date: Sun Jun 6 23:41:23 2010 -0700 + + Allocate a correctly sized framebuffer when tiling by using libdrm's support. + + When I made libdrm stop overallocating so much memory for the purpose + of bo caching, things started scribbling on the bottom of my + frontbuffer (and vice versa, leading to GPU hangs). We had the usual + mistake of size = tiled_pitch * height instead of size = tiled_pitch * + tile_aligned_height. + +commit e6acbc763229fd5b5b2cc1d65136404d02ac4655 +Author: Chris Wilson +Date: Mon Jun 7 18:04:51 2010 +0100 + + uxa: Setup acceleration functions prior to the damage layer + + We need to install the acceleration functions so that they are wrapped + by the Damage layer. This fixes the corruption under a compositing WM + introduced in commit 8700673157fdd3a87ad5150f2f30823261fec519. + + Signed-off-by: Chris Wilson + Reported-and-tested-by: Arkadiusz Miśkiewicz + +commit 1788b16eb26580624dd3df96ed84f68d40e78ed7 +Author: Chris Wilson +Date: Mon Jun 7 15:31:47 2010 +0100 + + i915: Fix typo from previous commit. + + A trivial change, I thought, having tested it before rebasing, unworthy + even of a perfunctory compile test. How wrong I was. + + Signed-off-by: Chris Wilson + +commit d9bc36ae03e3c56ab165d24fe4bdc6688fd62b6d +Author: Chris Wilson +Date: Mon Jun 7 15:28:18 2010 +0100 + + i915: Remove screen size limit from video setup. + + The i915 textured video routine know how to handle drawing on an output + larger than the 3D pipe, so allow them to do so. + + Signed-off-by: Chris Wilson + +commit 6555ef5fd16c9e4fe733caf9e831f29f97462278 +Author: Chris Wilson +Date: Mon Jun 7 13:16:34 2010 +0100 + + i915: Replace structure passing with macros for shader generation. + + gcc is horribly bad at collapsing the constants: + + text data bss dec hex filename + 282336 8720 256 291312 471f0 intel_drv.so.old + 269280 8720 256 278256 43ef0 intel_drv.so + + Signed-off-by: Chris Wilson + +commit d56ea7a852d7090360fe080acec268de55ee908d +Author: Chris Wilson +Date: Mon Jun 7 00:20:35 2010 +0100 + + Use the direct dixGevPrivate() API when available + + This is quicker and smaller than the old indirect function call to + dixLookupPrivate(). + + Signed-off-by: Chris Wilson + +commit 8700673157fdd3a87ad5150f2f30823261fec519 +Author: Chris Wilson +Date: Mon Jun 7 00:16:18 2010 +0100 + + Adapt glyphs for changes in devPrivates API + + Signed-off-by: Chris Wilson + +commit 42ddc39430a10513c49a415ddf1a0dc5fa52089e +Author: Keith Packard +Date: Fri Apr 30 13:33:54 2010 -0700 + + Adapt to DevPrivate API changes + + This allows the driver to be built against either the old or new + DevPrivate API. + + Signed-off-by: Keith Packard + +commit 2c1fda08e889cad07acb452230da06f9c383d21c +Author: Eric Anholt +Date: Fri Jun 4 16:04:37 2010 -0700 + + Use libc instead of deprecated libc wrappers for malloc/calloc/free. + +commit b586624d4f2908d2a998ba87fe0ae31c10f46b91 +Author: Chris Wilson +Date: Sun Jun 6 17:11:40 2010 +0100 + + uxa: Force fallback for copies. + + All but uxa_copy_window() perform the preliminary checks for whether + acceleration is available. The simplest method for adding the fallback + for uxa_copy_window() seems to be to add it in the core copy function, + so be it. + + This allows X to survive a little longer once we encounter a GPU hang. + + Signed-off-by: Chris Wilson + +commit 6db1e5231b7a0e79611f771d4efea686f7849e04 +Author: Chris Wilson +Date: Wed Jun 2 20:43:49 2010 +0100 + + dri: Protect against NULL dereference following GPU hang. + + References: + + Bug 28361 - "glresize" causes server segfault with single buffering. + https://bugs.freedesktop.org/show_bug.cgi?id=28361 + + [ 14528.767] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error. + [ 14528.767] (EE) intel(0): Disabling acceleration. + [ 14528.788] Backtrace: + [ 14528.858] 0: /usr/bin/X (xorg_backtrace+0x28) [0x491818] + [ 14528.858] 1: /usr/bin/X (0x400000+0x65ca9) [0x465ca9] + [ 14528.858] 2: /lib/libpthread.so.0 (0x7f9df2dc9000+0xedf0) [0x7f9df2dd7df0] + [ 14528.858] 3: /usr/local/lib/libdrm_intel.so.1 (drm_intel_bo_flink+0x0) [0x7f9defd60c60] + [ 14528.858] 4: /usr/local/lib/xorg/modules/drivers/intel_drv.so (0x7f9deff6a000+0x2fdfd) [0x7f9deff99dfd] + [ 14528.858] 5: /usr/lib/xorg/modules/extensions/libdri2.so (0x7f9df01b8000+0x19e7) [0x7f9df01b99e7] + [ 14528.858] 6: /usr/lib/xorg/modules/extensions/libdri2.so (0x7f9df01b8000+0x1fdb) [0x7f9df01b9fdb] + [ 14528.858] 7: /usr/lib/xorg/modules/extensions/libdri2.so (DRI2GetBuffersWithFormat+0x10) [0x7f9df01ba250] + [ 14528.858] 8: /usr/lib/xorg/modules/extensions/libdri2.so (0x7f9df01b8000+0x3834) [0x7f9df01bb834] + [ 14528.858] 9: /usr/bin/X (0x400000+0x2fc2c) [0x42fc2c] + [ 14528.858] 10: /usr/bin/X (0x400000+0x24da5) [0x424da5] + [ 14528.858] 11: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7f9df1d60a26] + [ 14528.858] 12: /usr/bin/X (0x400000+0x24959) [0x424959] + [ 14528.858] Segmentation fault at address 0x20 + [ 14528.858] Fatal server error: + [ 14528.858] Caught signal 11 (Segmentation fault). Server aborting + + Signed-off-by: Chris Wilson + +commit 2989f51caf3134460c2551de597e7e54fe74ee92 +Author: Chris Wilson +Date: Tue Jun 1 23:08:02 2010 +0100 + + i830: Remove unused coord-adjust. + + Signed-off-by: Chris Wilson + +commit dc402334f4e9b0de624bc89cd77eae4ec7cf1708 +Author: Chris Wilson +Date: Tue Jun 1 23:03:19 2010 +0100 + + i915: Centre sampling. + + Use centre sampling of textures to match pixman, and remove numerous + off-by-one and visual artefacts when rendering. The classic example for + this is cairo/text/xcomposite-projection where the edge of the rotated + rectangle is jaggy due to the incorrect sample position. + + Fixes: + + Bug 16917 - [i915] Blur on y-axis also when only x-axis is scaled + billiear + https://bugs.freedesktop.org/show_bug.cgi?id=16917 + + And about 15 tests from the Cairo test suite. + + Signed-off-by: Chris Wilson + +commit f74b3f82bab11463a0f4de9f614fc6aa1492ef24 +Author: Chris Wilson +Date: Tue Jun 1 22:31:35 2010 +0100 + + i915; Avoid the implicit flush on changing BUF_INFO + + 3DSTATE_BUF_INFO is an implicit flush of the piepline, so avoid emitting + that and associated state unless the destination pixmap has actually + changed. This is a win of around 3-5% for cairo-perf-trace, notably for + firefox. + + Signed-off-by: Chris Wilson + +commit f2272402035574c206a0e3383c55373c440fd928 +Author: Jesse Barnes +Date: Tue Jun 1 13:46:15 2010 -0700 + + DRI2: fix new buffer exchange check + + Chris's new buffer exchange check is a good one, but we don't want to + hit the immediate blit fallback path if it fails. We still want to + schedule a blit for sometime in the future, and we need to use it + wherever an exchange might occur (like the secondary flip check or the + currently disabled CanExchange check). + + Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28252. + + Signed-off-by: Jesse Barnes + +commit a386a003e7b0ff7100434dccd51fedd822454a6c +Author: Chris Wilson +Date: Mon May 31 22:18:43 2010 +0100 + + uxa: Spans, try again to get the early break correct. + + Trigger happy bug fixing. The sign *was* right, the endpoint was wrong. + + Signed-off-by: Chris Wilson + +commit 1672ee0421a99b745d65d72a3818de01d8100b6b +Author: Chris Wilson +Date: Mon May 31 22:08:43 2010 +0100 + + uxa: Sign reversal on early break from spans passing the YXband + + Introduced with e5c971e7639095d38da3518a5dc404b708d45cfb. + + Signed-off-by: Chris Wilson + +commit cd38b705be84901a38380dc2a1b90889b553d565 +Author: Chris Wilson +Date: Mon May 31 17:23:36 2010 +0100 + + Disable acceleration if we detect a hardware error. + + This is wildly optimistic, but it should work in a surprising number of + error situations and some output in those cases will be hopefully be + better than none... + + If we submit a batchbuffer and the kernel reports the GPU is hung (which + will be caused by an earlier execbuffer, and so the kernel should have + had enough time to determine whether or not it could reset the GPU) then + disable any further attempt to accelerate gfx and force fallbacks to map + the buffers and use the CPU. We cannot normally map any more buffers if + the GPU is hung, so only those already mapped prior to the hang can be + written to, or those allocated in system memory. However, we can expect + that the framebuffer is already mapped, and so have a reasonable + expectation to continue to see the display update. + + Signed-off-by: Chris Wilson + +commit 5fff430046db2030f89e49beb66c6476dc3fcd4c +Author: Chris Wilson +Date: Sat May 29 17:35:00 2010 +0100 + + uxa: Mega-Glyphs! + + Rewrite glyph rendering to avoid the intermediate buffer, accumulating + the glyph rectangles directly in the backend composite routines. And + modify the glyph cache routines to fully utilise the allocated size of + the tiled buffer on older hardware. To do this we alias all glyph sizes + into the same texture using a technique suggested by Keith Packard. + + PineView: + 885/856-> 1150/1110 kglyph/s (aa/rgb) + + Signed-off-by: Chris Wilson + +commit d31abccd41c417338aac7c681e8bc6bd187b1843 +Author: Chris Wilson +Date: Mon May 31 12:14:23 2010 +0100 + + i915: Support textured video on an extended desktop. + + Handle rendering textured video onto an extended desktop (>2048) by + using a temporary pixmap. Note that we still cannot handle rendering to + a greater than 2048 destination region, for that we will need to tile. + Hmm, time to request a 2560x1600, 10bpc monitor... + + Signed-off-by: Chris Wilson + +commit 2cfd5bc134f0dd86ea714594d61f6d5eb29019ce +Author: Chris Wilson +Date: Sat May 29 17:55:19 2010 +0100 + + dri: Compilation fix. + + 17:53 < arekm> ickle: i830_dri.c:630:28: error: ‘DrawableRec’ has no member named ‘bpp’ + 17:53 < arekm> ickle: i830_dri.c:630:57: error: ‘DrawableRec’ has no member named ‘bpp’ + + * sigh. I need to fix this machine to have the right version of the + * headers. + + Signed-off-by: Chris Wilson + +commit e2615cdeef078dbd2e834b68c437f098a92b941d +Author: Chris Wilson +Date: Sat May 29 16:37:12 2010 +0100 + + dri: Only flip if the front and back pixmaps match. + + An unredirected window (thanks Michel for the reminder) is backed by the + Screen pixmap, and so uses a reference of that as its front buffer. The + back buffer is a pixmap appropriately sized for the drawable. When the + application requests to swap its buffers, obviously we cannot simply + exchange the front and back buffer as they do not match, but need to copy + the appropriate region from the back to the front. + + Signed-off-by: Chris Wilson + +commit 8b2039187fc23f5e9dddf4081f8b1ab6f4c01416 +Author: Chris Wilson +Date: Sat May 29 12:14:55 2010 +0100 + + Revert "dri: Use size from backing pixmap when creating buffers." + + This reverts commit 44d45d3fa56f121ce89ffe5b28beb48be01a95df. + + Michel Dänzer pointed out the flaw in using the pixmap size instead of + the drawable size: + + Using the backing pixmap dimensions for this is not desirable. In + particular, it means that the DRI2 buffers of non-redirected windows + always have the same size as the screen. But even for redirected windows + it wastes some graphics memory with a re-parenting window manager, that + is if it doesn't break in various ways due to the top left corner of the + DRI2 buffers no longer corresponding to the top left corner of the window. + +commit 44d45d3fa56f121ce89ffe5b28beb48be01a95df +Author: Chris Wilson +Date: Sat May 29 10:39:28 2010 +0100 + + dri: Use size from backing pixmap when creating buffers. + + This avoid using the garbage values stored in the Screen drawable, + instead of the true values which are only maintained in its backing + pixmap. The consequence of using the wrong size was to hand a 1x1 + pixmap to metacity/mutter and have it believe it was a full screen + drawable; GPU hangs ensued if using page flipping. + + Signed-off-by: Chris Wilson + +commit 90c74a43149ec72bef64fb7e64b812294bda69a5 +Author: Chris Wilson +Date: Fri May 28 21:49:38 2010 +0100 + + i915: Don't re-emit vertex size unless it has changed. + + Signed-off-by: Chris Wilson + +commit a94ae175d6a69243a4465de0be0a8a3368e0ab28 +Author: Eric Anholt +Date: Fri May 28 12:40:02 2010 -0700 + + uxa: Fix prepare_solid being called without check_solid first. + + Fixes GPU hang on gen6. + +commit 66c90158e45e890c6f655195c6707d216c7ac4c5 +Author: Chris Wilson +Date: Fri May 28 17:13:30 2010 +0100 + + uxa: Skip the redundant miComputeCompositeRects() when adding to the mask + + As we are in full control of the destination (the temporary glyph mask) + and the source (the glyph cache) we know that there are no clip regions + on either and so can skip computing the composite rectangles. (We trust + the device clipping to prevent compositing outside the target.) + + x11perf on PineView: + 701/686 -> 881/856 kglyphs/s [aa/rgb] + + Signed-off-by: Chris Wilson + +commit 5b2254838eb89bf77eeb893c73eecb8c737822f4 +Author: Chris Wilson +Date: Fri May 28 12:47:26 2010 +0100 + + uxa: Make the glyph caches' fixed size explicit. + + Until we actual resize the glyph cache dynamically, make it obvious to + the reader and the compiler that the size is fixed. + + Signed-off-by: Chris Wilson + +commit 11581dda99cb2e4ae78fc73be4b02185b3be58ed +Author: Chris Wilson +Date: Fri May 28 11:38:05 2010 +0100 + + uxa: Use a glyph private rather than a hash table. + + Store the cache position directly on the glyph using a devPrivate rather + than an through auxiliary hash table. + + x11perf on PineView: + 650/638 kglyphs/s -> 701/686 kglyphs/s [aa/rgb] + + Signed-off-by: Chris Wilson + +commit 73111cf2a212ee5cc2e03af1c600867df0c55b39 +Author: Chris Wilson +Date: Wed May 26 21:05:27 2010 +0100 + + Decouple non-reusuable pixmaps from batch lists on unref. + + ==7596== Invalid write of size 4 + ==7596== at 0x491ACA8: intel_batch_teardown (i830_batchbuffer.c:118) + ==7596== by 0x491C9D6: I830CloseScreen (i830_driver.c:1419) + ==7596== by 0x8103A9C: RRCloseScreen (randr.c:105) + ==7596== by 0x80DE794: xf86CrtcCloseScreen (xf86Crtc.c:759) + ==7596== by 0x80BEBA3: DGACloseScreen (xf86DGA.c:268) + ==7596== by 0x80D044B: DPMSClose (xf86DPMS.c:134) + ==7596== by 0x488B050: XvCloseScreen (xvmain.c:320) + ==7596== by 0x81841B1: VidModeClose (xf86VidMode.c:110) + ==7596== by 0x80EB12F: CursorCloseScreen (cursor.c:191) + ==7596== by 0x810CA17: AnimCurCloseScreen (animcur.c:108) + ==7596== by 0x816937E: compCloseScreen (compinit.c:86) + ==7596== by 0x48D39B9: glxCloseScreen (glxscreens.c:221) + ==7596== Address 0x49c1a50 is 24 bytes inside a block of size 52 free'd + ==7596== at 0x4024866: free (vg_replace_malloc.c:325) + ==7596== by 0x80B023C: Xfree (utils.c:1096) + ==7596== by 0x4927CFD: i830_set_pixmap_bo (i830_uxa.c:647) + ==7596== by 0x491C9B4: I830CloseScreen (i830_driver.c:1413) + ==7596== by 0x8103A9C: RRCloseScreen (randr.c:105) + ==7596== by 0x80DE794: xf86CrtcCloseScreen (xf86Crtc.c:759) + ==7596== by 0x80BEBA3: DGACloseScreen (xf86DGA.c:268) + ==7596== by 0x80D044B: DPMSClose (xf86DPMS.c:134) + ==7596== by 0x488B050: XvCloseScreen (xvmain.c:320) + ==7596== by 0x81841B1: VidModeClose (xf86VidMode.c:110) + ==7596== by 0x80EB12F: CursorCloseScreen (cursor.c:191) + ==7596== by 0x810CA17: AnimCurCloseScreen (animcur.c:108) + + Signed-off-by: Chris Wilson + +commit a6fb6aa5f9c1c81b8b81b9d1138a526ffbbd5ad3 +Author: Chris Wilson +Date: Wed May 26 20:31:45 2010 +0100 + + Add vertex bo to the list of buffers to be torn down. + + Signed-off-by: Chris Wilson + +commit 5dce69002dd48dd6dce4f0e7ad9ecf2c4c17cfe4 +Author: Chris Wilson +Date: Wed May 26 20:26:42 2010 +0100 + + i965: Remove ATOMIC_BATCH. + + This paranoid check is deceased; pining for the fjords. + + Signed-off-by: Chris Wilson + +commit 06ebb55d308defbf8e01e30e4f994c2dd1071c40 +Author: Eric Anholt +Date: Sun May 23 20:33:47 2010 -0700 + + Add a workaround for Ironlake errata relating to disabling the clipper. + +commit 158a158dad26b6888dd2ebaf13e6020894475fcb +Author: Eric Anholt +Date: Sun May 23 20:28:24 2010 -0700 + + Add a workaround for Ironlake errata regarding blits and other engines. + +commit 3461f8f4bc2a49fd41c408d225c592623404be91 +Author: Eric Anholt +Date: Sun Apr 18 19:14:13 2010 -0700 + + Remove remaining REG_DUMPER build stuff. + +commit 03bbb4c896ef3cd275312b413a2c85d9f499c032 +Author: Chris Wilson +Date: Wed May 26 10:16:36 2010 +0100 + + uxa: Perform manual damage for CompositeRects + + [xserver-1.8] The damage layer doesn't wrap CompositeRects, so we need to + manually append the damaged region ourselves. This works for + miCompsiteRects since that translates the call into multiple invocations + of either PolyFillRectangle or Composite, which themselves cause damage. + + Fixes: + + Bug 28120 - Tint2's tooltip borders end up at 0,0 and do not disappear + https://bugs.freedesktop.org/show_bug.cgi?id=28120 + + Signed-off-by: Chris Wilson + +commit b9ada52a3081f54e0ed094ac31188bb240866f81 +Author: Chris Wilson +Date: Wed May 26 10:14:52 2010 +0100 + + uxa: Force the alpha value to 0xffff when treating Over as Src + + Since we have at most 8 bits of alpha, we treat >= 0xff00 as opaque. + However, being paranoid we should set the alpha value to 0xfff in case + something unexpected happens when converting from the xRenderColor to + the pixel value. + + Signed-off-by: Chris Wilson + +commit 3055d40164590147d35b5e7059ebe5f5858c85fa +Author: Chris Wilson +Date: Wed May 26 10:12:57 2010 +0100 + + uxa: Use Composite rather than solid blitter for PolyRect + + Due to the relocation overhead, using a single composite with many + rectangles outperforms many solid blits. + + Signed-off-by: Chris Wilson + +commit ec2437f958ec4f5ac5222b37cba4cd403b5c8855 +Author: Chris Wilson +Date: Wed May 26 10:12:18 2010 +0100 + + uxa: Add PICT format mapping for depth 4 pixmaps. + + Signed-off-by: Chris Wilson + +commit 309bd3a29943ef7502d40c67be49c19a59b6d1a2 +Author: Chris Wilson +Date: Wed May 26 10:11:32 2010 +0100 + + i830: Skip an empty fill. + + In the extremely unlikely event that the higher layer erroneous gave us + an empty fill, skip it. + + Signed-off-by: Chris Wilson + +commit b645ec83e0d86f2247b8338ceab60b9502516e70 +Author: Chris Wilson +Date: Tue May 25 09:49:20 2010 +0100 + + uxa: Apply the drawable offset to the solid rects + + Fixes: + + Bug 28120 - Tint2's tooltip borders end up at 0,0 and do not disappear + https://bugs.freedesktop.org/show_bug.cgi?id=28120 + + Signed-off-by: Chris Wilson + +commit 9d8ac271404ff219c3d40ae8f829e8b76ac7c359 +Merge: 509df27 ea07535 +Author: Chris Wilson +Date: Fri May 21 11:01:30 2010 +0100 + + Merge branch 'glyphs' + + Tweak glyphs to improve x11perf on i915 by about 33%. + PineView, aa10text: 460 -> 617 kglyphs/s. + PineView, rgb10text: 434 -> 610 kglyphs/s. + + Speedups + ======== + xcb poppler 18.636 -> 13.958: 1.34x speedup + xlib firefox-talos-gfx 71.905 -> 56.232: 1.28x speedup + xcb firefox-talos-gfx 72.882 -> 57.969: 1.26x speedup + xlib gnome-terminal-vim 38.126 -> 34.472: 1.11x speedup + xcb gnome-terminal-vim 35.164 -> 32.573: 1.08x speedup + xlib poppler 19.634 -> 18.246: 1.08x speedup + + Note the lack of significant improvement for firefox-planet-gnome. + +commit ea07535240dafc4c6ef55b4b7a2eeaa595febe86 +Author: Chris Wilson +Date: Fri May 21 14:33:18 2010 +0100 + + i915: Emit CA over using OutReverse + Add passes + + On PineView: + 578/621 -> 610/617 kglyphs/sec [rgb/aa] + +commit 80a9e64f50aeda6004e3aba1fbfdda50bb1f1c82 +Author: Chris Wilson +Date: Fri May 21 09:55:55 2010 +0100 + + uxa: Use temporary dest when target is too large for compositor + + If the destination cannot fit into the 3D pipeline when we need to + composite, we fallback to doing the operation on the CPU. This is very + slow, and quite easy to trigger on i915 by plugging in an external + display. + + An alternative is to extract the extents of the operation from the + destination using the blitter which can usually handle much larger + operations. This gives us a temporary target that can fit into the 3D + pipeline and thus be accelerated, before copying back into the larger + real destination. + + For x11perf this boosts glyph rendering on PineView, from 38kglyphs/s to + 480kglyphs/s. Just a little shy of the native performance of 601kglyphs/s + + Signed-off-by: Chris Wilson + +commit 91f560034fc2695680d1208a78fc56d814b0da79 +Author: Chris Wilson +Date: Thu May 20 10:26:59 2010 +0100 + + uxa: Composite glyphs directly onto dst when possible. + + Without using a mask and compositing directly onto the destination, + takes us from 580 kglyphs/s to 850 kglyphs/s on i945 [x11perf -aa10text]. + + However, the extra intersection check almost entirely cancels out the + speed up and we discover that the glyphs in x11perf are always + overlapping. Nothing is ever easy. + + Signed-off-by: Chris Wilson + +commit e3ece83f577d3664962edeec6ab5bdc41c5d77cf +Author: Chris Wilson +Date: Wed May 19 16:52:11 2010 +0100 + + i915: compute normalized texcoords using a scale factor. + + 500 -> 580kglyphs/s on i945. + + Signed-off-by: Chris Wilson + +commit c2abf8d659b8b161a4f9df100b614ee3c8f8e458 +Author: Chris Wilson +Date: Wed May 19 16:18:40 2010 +0100 + + uxa: translate the region in line for composites + + When compositing, we need to convert the box into a rect and so the + advantages of using REGION_TRANSLATE are lost. + + Signed-off-by: Chris Wilson + +commit 2adf823b80b7b1f6df1bf3422a1219e93321a8fb +Author: Chris Wilson +Date: Wed May 19 15:02:58 2010 +0100 + + i915: Add special case primitive emitters for glyphs. + + Signed-off-by: Chris Wilson + +commit f64ab9e0d97dd9c654b4ae1924e62ef6813d9bb0 +Author: Chris Wilson +Date: Wed May 19 14:50:12 2010 +0100 + + i915: Move vertices into a vertex buffer object. + + In theory this should allow us to pack far more operations into a single + batch buffer, and reduce our overheads. + + Signed-off-by: Chris Wilson + +commit 2b050f330f78d02e7f476e55be29d760271ac61c +Author: Chris Wilson +Date: Wed May 19 10:57:46 2010 +0100 + + Use pwrite to upload the batch buffer + + By using pwrite() instead of dri_bo_map() we can write to the batch buffer + through the GTT and not be forced to map it back into the CPU domain and + out again, eliminating a double clflush. + + Measing x11perf text performance on PineView: + + Before: + 16000000 trep @ 0.0020 msec (511000.0/sec): Char in 80-char aa line (Charter 10) + 16000000 trep @ 0.0021 msec (480000.0/sec): Char in 80-char rgb line (Charter 10) + After: + 16000000 trep @ 0.0019 msec (532000.0/sec): Char in 80-char aa line (Charter 10) + 16000000 trep @ 0.0020 msec (496000.0/sec): Char in 80-char rgb line (Charter 10) + + Signed-off-by: Chris Wilson + +commit dcef703a7cdcf360f12312a338361697acffc3e9 +Author: Chris Wilson +Date: Wed May 19 09:30:02 2010 +0100 + + Kill paranoid assertions on every write into the batchbuffer. + + On my PineView box these represent ~5% overhead on x11perf text: + + Before: + 16000000 trep @ 0.0020 msec (495000.0/sec): Char in 80-char aa line (Charter 10) + 12000000 trep @ 0.0022 msec (461000.0/sec): Char in 80-char rgb line (Charter 10) + + After: + 16000000 trep @ 0.0020 msec (511000.0/sec): Char in 80-char aa line (Charter 10) + 16000000 trep @ 0.0021 msec (480000.0/sec): Char in 80-char rgb line (Charter 10) + + Signed-off-by: Chris Wilson + +commit bc41f84e01f18548b05c670e1fd0d641adc28d0f +Author: Chris Wilson +Date: Tue May 18 23:54:13 2010 +0100 + + i915: Emit composite primitive with specialised functions. + + Signed-off-by: Chris Wilson + +commit 4a3476ea094e84887fefb558e0bba023fee34151 +Author: Chris Wilson +Date: Tue May 18 23:25:59 2010 +0100 + + i915: amalgamate composite into a single primitive list + + Combine all the calls to composite between prepare_composite and + done_composite into a single primitive list, rather than a primitive + call per composite(). + + Signed-off-by: Chris Wilson + +commit e5c971e7639095d38da3518a5dc404b708d45cfb +Author: Chris Wilson +Date: Tue May 18 22:16:17 2010 +0100 + + uxa: Spans! OMG! + + Use composite rather than solid blits in order to bring performance on + a par with the CPU when using GEM and relocations. + + Signed-off-by: Chris Wilson + +commit 509df27c7401e96d3062890da73f6af6629adef4 +Author: Kristian Høgsberg +Date: Tue May 18 10:01:52 2010 -0400 + + dri: Clean up DRI2 API #ifdefs a bit + + Signed-off-by: Kristian Høgsberg + +commit 5e04a81369dfc76bbc1ebbd4db00c23e71eb9e1c +Author: Chris Wilson +Date: Mon May 17 15:16:25 2010 +0100 + + i830: Remove vestigal debugging ALWAYS_FLUSH and ALWAYS_SYNC + + These are now debugging options exposed in Xorg.conf, and now unused int + the source code. + + Signed-off-by: Chris Wilson + +commit 723cc45b2707aa160eac6d5b56a20e19cc42c8a3 +Author: Chris Wilson +Date: Mon May 17 15:14:55 2010 +0100 + + dri: Check error code from GetScratchGC() + + It may fail so be prepared, and do use the right drawable! + + Signed-off-by: Chris Wilson + +commit 2c00297bc3b4969f28e2eb19bce36ece50ce4ccb +Author: Chris Wilson +Date: Sun May 16 19:15:37 2010 +0100 + + uxa: Replace solid planemask [0xffffffff] with FB_ALLONES + + Signed-off-by: Chris Wilson + +commit 2c69709d8afa6e9c0990efc463df0061536585e1 +Author: Chris Wilson +Date: Sun May 16 18:41:52 2010 +0100 + + i830: Encode surface bpp into format + + References: + + Bug 28135 - [855GM] Slowdown/High CPU-Usage after Git-Commit + 926fbc7d90ac1d0d49d154f136f9c9ed613c98c2 + https://bugs.freedesktop.org/show_bug.cgi?id=28135 + + The simple answer is that I had assumed that 0 was a reserved value. + However, without the bbp encoded into the format 0 was used for a8r8g8b8 + and r5g6b5, which are very common formats! + + The other possibility for the slowdown is that gtkperf is using of the + now verboten xrgb formats -- but would in fact be valid if the source + covers the clip and we could fixup the alpha value in the fixed function + combine. + + Signed-off-by: Chris Wilson + +commit 21b5fd427f5ed6c99276349a7ae128eea580dd72 +Author: Chris Wilson +Date: Sun May 16 13:51:41 2010 +0100 + + uxa: Tidy uxa_solid_rects() + + Move the operator reduction after a few fallbacks, closer to its use. + + Signed-off-by: Chris Wilson + +commit 61835701fd411d3bb550ceee3365e30639e46861 +Author: Chris Wilson +Date: Sun May 16 13:26:07 2010 +0100 + + uxa: Patterns are acquired at 0,0 + + Set the correct offset for the gradients patterns after rendering to a + local Picture. + + Fixes cairo/test/huge-radial and friends + + Signed-off-by: Chris Wilson + +commit 89f43f69a9c854fb2b82538a8938002675ca19e4 +Author: Chris Wilson +Date: Sat May 15 18:34:54 2010 +0100 + + uxa: Force an alpha channel when rendering source fallbacks + + As the source may not cover the extents, we need to represent those + areas as transparent in the fallback picture, ergo we need an alpha + channel. We could be smarter and force a format conversion when + necessary, and we could let the backend choose the most appropriate + format. + + Signed-off-by: Chris Wilson + +commit 524fd2dd0da8f69d4c3f5aebe3a345fe34af609d +Author: Chris Wilson +Date: Sat May 15 18:23:21 2010 +0100 + + uxa: Apply clip for solid rectangles. + + References: + + Bug 28120 - Tint2's tooltip borders end up at 0,0 and do not disappear + https://bugs.freedesktop.org/show_bug.cgi?id=28120 + + Signed-off-by: Chris Wilson + +commit 58b089febceca1e915607bb723ee658aaa9dbed3 +Author: Chris Wilson +Date: Sat May 15 09:11:46 2010 +0100 + + uxa: Avoid using blits when with PictFilterConvolution + + References: + + Bug 28098 Compiz renders shadows wrong, garbage line of pixels along left + and top edge of windows + https://bugs.freedesktop.org/show_bug.cgi?id=28098 + + Signed-off-by: Chris Wilson + +commit ef95899f5b21453daeabf81a3015b22456d21fec +Author: Chris Wilson +Date: Sat May 15 09:02:07 2010 +0100 + + uxa: Check the w-scaling component is 1 for an translation matrix + + Signed-off-by: Chris Wilson + +commit 9c3da71349bcfeabae08f1572cf602c357bf7641 +Author: Chris Wilson +Date: Sat May 15 01:05:24 2010 +0100 + + i830: Remove xrgb conversion to argb, no longer required. + + All textures are now properly declared so that the alpha swizzling + occurs in the sampler or not at all. The downside is that for quite a + few composite operations we have to fallback to software on older + hardware. There is scope for more performing the alpha expansion in + shaders or combiners when we know the picture covers the clip - which is + almost all of the time for normal operations especially those + constructed by Cairo. + + Signed-off-by: Chris Wilson + +commit 926fbc7d90ac1d0d49d154f136f9c9ed613c98c2 +Author: Chris Wilson +Date: Sat May 15 01:01:20 2010 +0100 + + i830: Remove incorrectly mapped tex formats. + + We no longer workaround the lack of alpha expansion for xrgb textures as + this interferes with EXTEND_NONE, though we could if we know the source + covers the clip... + + Signed-off-by: Chris Wilson + +commit 95654cffa8643f61f153218f27e800df75b9bdee +Author: Chris Wilson +Date: Sat May 15 00:50:42 2010 +0100 + + uxa: Fix order of conditionals to only run fill_region for SRC or opaque + + Signed-off-by: Chris Wilson + +commit f67b45965b527699794ee21174809c5d71c03f22 +Author: Chris Wilson +Date: Sat May 15 00:50:20 2010 +0100 + + uxa: Expand the range of compatible formats to cover all bpp. + + Signed-off-by: Chris Wilson + +commit 82d07fdf10cac2211af74ebf7d519daacd7084c0 +Author: Chris Wilson +Date: Sat May 15 00:49:39 2010 +0100 + + uxa: Only use 1x1R as a solid with an opaque format or SRC + + Signed-off-by: Chris Wilson + +commit 3bca186a7ead84d4f0e71dfd83847ef77a4e390b +Author: Chris Wilson +Date: Sat May 15 00:48:31 2010 +0100 + + uxa: Call check_solid before running the solid blitter. + + Signed-off-by: Chris Wilson + +commit 213816c30b5ca6146e26ded85b2aa31ca16ca9bf +Author: Chris Wilson +Date: Sat May 15 00:47:55 2010 +0100 + + i915: Load texture into directly into OC when possible. + + Signed-off-by: Chris Wilson + +commit 737de9a779d05fe6fb1efe1904fda2cc452ff137 +Author: Chris Wilson +Date: Fri May 14 23:48:27 2010 +0100 + + uxa: Disable compatible src xrgb and dst argb + + I'm seeing garbage alpha for rendercheck blend: + + x8r8g8b8a 10x10 SRC ar8g8b8a + + so disable blitting until I work out if we can fast-path it. + + Signed-off-by: Chris Wilson + +commit 271240fd477b11885947da32868bc77151681559 +Author: Chris Wilson +Date: Fri May 14 23:38:02 2010 +0100 + + i915: Remove a couple of unsupported 16bpp no-alpha tex formats + + Signed-off-by: Chris Wilson + +commit a7c318d21c9035f6cab48c16e734b9ecb6f4b238 +Author: Chris Wilson +Date: Fri May 14 23:30:21 2010 +0100 + + uxa: Parse BGRA pixel formats. + + Signed-off-by: Chris Wilson + +commit f7bbcc492a05f0801c64ee884798cf1a7ebb71c2 +Author: Chris Wilson +Date: Fri May 14 23:29:13 2010 +0100 + + Split the prepare blitter functions into check + prepare. + + Allow us to check whether we can handle the operation using the blitter + prior to doing any work. + + Signed-off-by: Chris Wilson + +commit 4be8d7eb89e61ffb2ceb19f1f84260e581187692 +Author: Chris Wilson +Date: Fri May 14 21:13:21 2010 +0100 + + i915: Don't force alpha=1 for RGB drawables in the shader. + + I was blindly fixing rendercheck without thinking. We need to force the + alpha value to be in the blend unit and not before -- otherwise we + generate the incorrect result whilst blending. D'oh. + +commit b9a5e36f957e42eaf0387ad15f2298d3e9538b05 +Author: Chris Wilson +Date: Fri May 14 20:52:48 2010 +0100 + + uxa: enable solid rects for backends that require pixmaps + + Convert the color into a (cached) pixmap if the backend cannot handle + the SolidFill natively. + + Signed-off-by: Chris Wilson + +commit a21297d7cc5945704d8cbd28ad0a2a3f6096fa47 +Author: Chris Wilson +Date: Fri May 14 17:51:42 2010 +0100 + + drm: Remove pin(); unpin() sync + + GEM handles serialisation of the new front buffer with respect to page + flipping and rendering and reports back when the flip is complete. + Adding a sync point here is then redundant. + + Signed-off-by: Chris Wilson + +commit 7ee73d2c6f373f3d6829cb1876b1940db62be452 +Author: Chris Wilson +Date: Fri May 14 17:51:20 2010 +0100 + + drm: Remove unused old_front parameter from drmmode_do_pageflip. + + Signed-off-by: Chris Wilson + +commit 030d56279bf14d9ddd42d8fdbeaa66ef3f557b4d +Author: Chris Wilson +Date: Fri May 14 16:53:40 2010 +0100 + + drm: don't overwrite the old intel->front_buffer + + It's now handled in the common ExchangeBuffers() path. + + Signed-off-by: Chris Wilson + +commit 5bd022739511104e4978bdfd2f4a1f60b9206723 +Author: Chris Wilson +Date: Fri May 14 15:47:09 2010 +0100 + + i830: Teardown batch entries on reset. + + By not cleaning up the batch entries when resetting the X server, we left + the pointers in an inconsistent state and caused X to crash. + +commit 0d2392d44aae95d6b571d98f7ec323cf672a687f +Author: Chris Wilson +Date: Fri May 14 10:32:12 2010 +0100 + + dri: Hold reference to buffers across swap + + As we schedule swaps for some time in the future and may process a + detachment prior to receiving the vblank notification from the kernel, + we need to hold a reference to the buffers for our swap event handler. + + Fixes: + Bug 28080 - "glresize" causes X server segfault with indirect rendering. + https://bugs.freedesktop.org/show_bug.cgi?id=28080 + + Signed-off-by: Chris Wilson + +commit 8de09a0707ee1be1b919b979843711728618ef27 +Author: Chris Wilson +Date: Thu May 13 17:15:28 2010 +0100 + + uxa: Convert 1x1R back to solid_fill + + In the change to prevent blitting between incompatible sources, we also + prevented 1x1R pixmaps from being used for solid fills. Reorder the + sequence of conditions to enable this fast path again. + +commit 92e9cf8af784b13c28030e38b15c8decf29e6a32 +Author: Chris Wilson +Date: Thu May 13 15:12:51 2010 +0100 + + uxa: Only use solid_fill for SRC. + +commit d1bd14e8b6754ba9f797642e1b33bf689e19417b +Author: Chris Wilson +Date: Thu May 13 15:11:16 2010 +0100 + + uxa: Replace source for CLEAR with a transparent solid + + This means that we will hit the faster try_solid_fill path instead. + +commit cdab72c405434ecbf7a79e402ff2d65d6a728179 +Author: Chris Wilson +Date: Thu May 13 15:12:32 2010 +0100 + + uxa: Fallback early if compositing with alphaMaps + +commit 25811dc7b7d1ad3fb01c31197d1ae1fe5b498975 +Author: Chris Wilson +Date: Thu May 13 15:09:28 2010 +0100 + + i915: Force output alpha to 1. if dst has no alpha channel. + + Ensure that garbage is not stored in the unused alpha channel so that + we can rely on it being currently initialiased when used as a source or + returning via GetImage. + + Partial fix for rendercheck -t blend + +commit 0e726b85ca6013ae9dc51391aaa309203352b61e +Author: Chris Wilson +Date: Thu May 13 09:41:39 2010 +0100 + + i915: Add a2r10g10b10 format and friends + + Signed-off-by: Chris Wilson + +commit 9f54107f866a25cf670f81f7c52b8c108728c6a5 +Author: Chris Wilson +Date: Tue May 11 14:55:16 2010 +0100 + + dri2: Handle reference counting across page flipping + + 1. Instead of swapping bos, swap the entire private structure. + + 2. If we update the pixmap bo for the Screen, make sure we update the + reference inside intel->front_buffer so that xrandr still functions. + + Fixes: + + Bug 27922 - i965: Rapidly resizing OpenGL window causes GPU to hang. + https://bugs.freedesktop.org/show_bug.cgi?id=27922 + + Signed-off-by: Chris Wilson + +commit 6c27f6e4f76b97df71094acf25083b2922966b42 +Author: Chris Wilson +Date: Wed May 12 12:01:46 2010 +0100 + + uxa: Avoid glyph ping-pong with !offscreen destination + + Signed-off-by: Chris Wilson + +commit d5383c2073e181b9ec352461c05d6202ad37f9d6 +Author: Chris Wilson +Date: Wed May 12 10:53:14 2010 +0100 + + uxa: Avoid ping-pong with !offscreen destination and traps + + If we are destined to target an !offscreen drawable, then uploading the + trapezoid mask to a bo is the last thing we actually want to do... + + Signed-off-by: Chris Wilson + +commit 00664b8f9d3da8d0d6aa53471ed3a8a8f6391660 +Author: Chris Wilson +Date: Wed May 12 12:41:51 2010 +0100 + + uxa: Fallback when compositing to a !offscreen destination + + Signed-off-by: Chris Wilson + +commit 0c6372a77fd8c051534c1b420a02a8737aa1dd01 +Author: Chris Wilson +Date: Wed May 12 09:57:27 2010 +0100 + + i830: Prevent allocation of bo larger than half the aperture + + We need to prevent overcommitting the aperture, and in particular if we + allocate a buffer larger than available space we will fail to mmap it in + and rendering will fail. Trying to allocate multiple large buffers in + the aperture, often the case when falling back, causes thrashes and + eviction of useful buffers. So from the outset simply do not allocate a + bo if the the required size is more than half the available aperture + space. + + Fixes allocation failure in ocitymap.trace for instance. + + Signed-off-by: Chris Wilson + +commit 244b7cbfffdcda4761948eaa37ed2a30ca81f107 +Author: Chris Wilson +Date: Wed May 12 09:18:30 2010 +0100 + + uxa: Use accelerated PutImage for uploading pixman images. + + Short-circuits the current use of PutImage from CopyArea, bypassing all + the temporary allocations. + +commit cb887cfc670bf63993bd313ff33927afb8198eae +Author: Chris Wilson +Date: Fri Mar 26 09:59:51 2010 +0000 + + uxa: solid rects + + The cost of performing relocations outweigh the advantages of using the + blitter for solids with lots of rectangles. + + References: + + Bug 22127 - [UXA] 50% performance regression for XRenderFillRectangles + https://bugs.freedesktop.org/show_bug.cgi?id=22127 + + By using the 3D pipeline we improve our performance by around 4x on + i945, measured by the jxbench microbenchmark, and a factor of 10x by + short-cutting to the 3D pipeline for blended rectangles. + + Before, on a i945GME: + 19982.412060 Ops/s; rects (!); 15x15 + 9599.131693 Ops/s; rects (!); 75x75 + 3803.654743 Ops/s; rects (!); 250x250 + 6836.743772 Ops/s; rects blended; 15x15 + 1443.750000 Ops/s; rects blended; 75x75 + 495.335821 Ops/s; rects blended; 250x250 + 23247.933884 Ops/s; rects composition (!); 15x15 + 10993.073048 Ops/s; rects composition (!); 75x75 + 3595.905172 Ops/s; rects composition (!); 250x250 + + After: + 87271.145975 Ops/s; rects (!); 15x15 + 32347.744361 Ops/s; rects (!); 75x75 + 5884.177215 Ops/s; rects (!); 250x250 + 73500.000000 Ops/s; rects blended; 15x15 + 33580.882353 Ops/s; rects blended; 75x75 + 5858.811749 Ops/s; rects blended; 250x250 + 25582.317073 Ops/s; rects composition (!); 15x15 + 6664.728682 Ops/s; rects composition (!); 75x75 + 14965.909091 Ops/s; rects composition (!); 250x250 [suspicious] + + This has no impact on Cairo, but I have a suspicion from watching xtrace + that Qt likes to blit thousands of 1x1 rectangles with the same colour. + However, we are still around 2-3x slower than the reported figures for + EXA! + + Signed-off-by: Chris Wilson + +commit c8e10f7791fecf0fed7ad606db062d87d8ff263c +Author: Chris Wilson +Date: Wed May 12 12:41:00 2010 +0100 + + debug: Add names for operators + + Most useful for confirming my worst fears: unwarranted use of + OutReverse + Add. + + Signed-off-by: Chris Wilson + +commit 6ea8ce640fbc7e5054b521a6f70b303945d0e849 +Author: Chris Wilson +Date: Tue May 11 19:35:59 2010 +0100 + + xvmc: Build fix with -pedantic + + Fixes: + + Bug 27352 - RPMLINT error causes build breakage + https://bugs.freedesktop.org/show_bug.cgi?id=27352 + + Reported-by: Johannes Obermayr + Signed-off-by: Chris Wilson + +commit e1b7e8bf1d475b3d00adcb96e6002c20c9e70d1c +Author: Chris Wilson +Date: Tue May 11 15:50:23 2010 +0100 + + drmmode: Reorder i830_set_pixmap_bo() so that the correct stride is used. + + The pitch needs to be set on the pixmap prior to the private + intel_pixmap structure being created so that it can record the correct + value from the pixmap. + + Signed-off-by: Chris Wilson + +commit dfbaf9aab80cf33d47148f087fa747eacd508b05 +Author: Chris Wilson +Date: Tue May 11 14:54:15 2010 +0100 + + i830: Never create a bo for depth=1 pixmaps. + + As we can not accelerate these either as a destination or a source, + don't bother allocating a buffer object for them. + + Signed-off-by: Chris Wilson + +commit 5b7efe375ae951ffcdb2c81e2ad8a2ed86ffbdf2 +Author: Chris Wilson +Date: Tue May 11 14:53:29 2010 +0100 + + i830: Use set_pixmap_bo() instead of open-coding. + + The advantage is that this enables in-flight reuse of the old pixmap if + possible. + + Signed-off-by: Chris Wilson + +commit ad8af95dd35921118f45d6cff355c80cf0906ff0 +Author: Chris Wilson +Date: Tue May 11 14:52:54 2010 +0100 + + i830: Do not cache in-flight non-reusable buffers. + + Signed-off-by: Chris Wilson + +commit f1048e14d5ef34970cb717e2a37d1c6bb4ea3a34 +Author: Chris Wilson +Date: Tue May 11 11:39:46 2010 +0100 + + i965: Add texformats mapping for additional pixman formats + + Signed-off-by: Chris Wilson + +commit a35afd4a2df8bab543700d874274228eddccae5b +Author: Chris Wilson +Date: Tue May 11 11:26:33 2010 +0100 + + uxa: Recheck texture after acquiring pattern. + + As the first step to handling unsupported texture formats, double check + that the converted pattern can be used as a texture by the card. + + Fixes: rendercheck -t repeat + + Signed-off-by: Chris Wilson + +commit d745cab6c45b9fce5e46eacbdd04ceae911fddbb +Author: Keith Packard +Date: Mon May 10 22:58:49 2010 -0700 + + Must call ValidateGC in i830_uxa_put_image for scratch GC + + Always need to call ValidateGC or the scratch GC will not get the + right composite clip. + + Signed-off-by: Keith Packard + +commit 3eded4202ea00d42edf5edad831484ebc6c0c826 +Author: Chris Wilson +Date: Mon May 10 23:38:17 2010 +0100 + + i915: Fix pixmap based masks. + + Signed-off-by: Chris Wilson + +commit 1ecd89be039b642affb2f9933f4341d186cb4dea +Author: Chris Wilson +Date: Mon May 10 23:33:52 2010 +0100 + + uxa: Protect against valid SourcePict in uxa_acquire_mask() + + Signed-off-by: Chris Wilson + +commit a8761585ef0b37736d302299d6b03e0957ad3e16 +Author: Chris Wilson +Date: Mon May 10 19:38:24 2010 +0100 + + i830: Minor cleanup + + Remove some extraneous prototypes and unused variables. + + Signed-off-by: Chris Wilson + +commit 9e9b0d85da801f1f95c7bc7e99566fe7056f5813 +Author: Chris Wilson +Date: Mon May 10 18:37:02 2010 +0100 + + i830: Update stride when swapping bo for PutImage + + Signed-off-by: Chris Wilson + +commit 0d4dd00aeafdd625ffe902e26e666b63a0842adc +Author: Chris Wilson +Date: Mon May 10 12:10:09 2010 +0100 + + uxa,i915: Handle SourcePict through uxa_composite() + + Signed-off-by: Chris Wilson + +commit 21c1c3c7f6eb2b5070d2153b15a8fb1afe938bbb +Author: Chris Wilson +Date: Mon May 10 10:19:28 2010 +0100 + + i915: Use 1x1R pixmap for solid drawables + + x11perf has a regression + https://bugs.freedesktop.org/show_bug.cgi?id=25068 + + caused by + + commit e581ceb7381e29ecc1a172597d258824f6a1d2d3 + i915: Use the color channels to pass along solid sources and masks. + + Do not convert 1x1R pixmaps into a solid color as the readback from the + bo negates all the performances advantages of using a smaller vertex + buffer and fewer samplers. + + Before (PineView): + aa=66800 glyph/s, rgb=28800 glyphs/s + + Now: + aa=96800 glyphs/s, rgb=48500 glyphs/s + + Signed-off-by: Chris Wilson + +commit f52b6e832292c02c0010b19882e38e1097beeda0 +Author: Chris Wilson +Date: Mon May 10 09:39:44 2010 +0100 + + uxa: Rearrange checking and preparing of composite textures. + + x11perf regression caused by 2D driver + https://bugs.freedesktop.org/show_bug.cgi?id=28047 + + caused by + + commit a7b800513fcc94e063dfd68d2f63b6bab7fae47d + uxa: Extract sub-region from in-memory buffers. + + The issue is that as we extract the region prior to checking whether the + composite can in fact be accelerated, we perform expensive surplus + operations. This is particularly noticeable for ComponentAlpha text, + such as rgb10text. The solution here is to rearrange the + check_composite() prior to acquiring the sources, and only extracting + the subregion if the render path can not actually handle the texture. + + Performance (on PineView): + a7b800513^: aa=68600 glyphs/s, rgb=29900 glyphs/s + a7b800513: aa=65700 glyphs/s, rgb=13200 glyphs/s + now: aa=66800 glyph/s, rgb=28800 glyphs/s + + The residual lossage seems to be from the extra function call and + dixPrivate lookups. Hmm. More warning is the extremely low performance, + however the results are consistent so the improvement looks real... + + Signed-off-by: Chris Wilson + +commit 848ab66384508c3ad3e5fb4884e4527f3ebd3bde +Author: Chris Wilson +Date: Sat May 8 18:36:55 2010 +0100 + + uxa: Transform composites with a simple translation into a blit + + We can also convert a composite with an integer translation into a + blit, so long as the sample extents remains within the source. + + Signed-off-by: Chris Wilson + +commit a7b800513fcc94e063dfd68d2f63b6bab7fae47d +Author: Chris Wilson +Date: Wed Apr 14 21:14:34 2010 +0100 + + uxa: Extract sub-region from in-memory buffers. + + If the buffer is too large or not suitable for a GPU operation, we + currently fallback and perform the composite on the CPU. An alternative + is too extract the small region out of the source (as usually the + sample extents are much smaller than the actual surface size) and try + the composite with the new surface. + + The effect is particularly noticeable on pathological websites that use + very large background images. For example, http://www.woodtv.com/ uses a + 1299x15000 pattern that is obscured by another opaque pattern. + + Signed-off-by: Chris Wilson + +commit 8562b7bc6740eef2602af76b8685388efd2d4d37 +Author: Chris Wilson +Date: Tue Apr 27 10:27:44 2010 +0100 + + i830: prepare the uxa pixmap for fbCopyArea. + + Complete the prepare access for the PutImage fallback via fbCopyArea(), + by remembering to set the private pointer to the GTT mapping. + + Signed-off-by: Chris Wilson + +commit 9a5cd65b593ea82e56e0c403f7ddcc2420a64dc3 +Author: Chris Wilson +Date: Mon Apr 26 09:07:07 2010 +0100 + + i830: if pixman_blt() fails fallback to fbCopyArea() + + On older versions of pixman, pixman_blt() can return false if the images + are <= 8bpp. If we are being called from CopyArea, then we cannot return + FALSE here as that will trigger an infinite recursion. Instead we must + manually perform the fallback using fbCopyArea(). + + Reported-by: Peter Clifton + Signed-off-by: Chris Wilson + +commit 86d349aa7b0a596fbb9530e896c19349405bf3ba +Author: Chris Wilson +Date: Mon Apr 26 09:12:54 2010 +0100 + + i830: tidy in flight bo reuse. + + A left-over cleanup patch for c374c94. *sigh* + + Signed-off-by: Chris Wilson + +commit 72fd7d191c33c8d0b75b06ab0717d7ca0d4e019a +Author: Daniel Vetter +Date: Mon Apr 19 21:56:57 2010 +0200 + + Fix "make dist" + + This is some fallout from my xvmc cleanup. + + Original-Patch-by: Rico Tzschichholz + Signed-off-by: Daniel Vetter + +commit 9494f4e91f8c8c7a0f8d61c6883c9bfceb2cec46 +Author: Daniel Vetter +Date: Fri Apr 16 22:24:01 2010 +0200 + + i810: adjust the pitch for DRI rendering + + Current code forgot to adjust the pitch of the frontbuffer. + + Signed-off-by: Daniel Vetter + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=16729 + +commit c374c94e41d6e7d677334171e3255778d77cbe18 +Author: Chris Wilson +Date: Wed Mar 31 11:50:27 2010 +0100 + + uxa: Reuse in-flight bo + + When we need to allocate a new bo for use as a gpu target, first check + if we can reuse a pixmap that has already been relocated into the + aperture as a temporary target, for instance a glyph mask or a clip mask. + + Before: + backend test min(s) median(s) stddev. + xlib firefox-planet-gnome 50.568 50.873 0.30% + xcb firefox-planet-gnome 49.686 53.003 3.92% + xlib evolution 40.115 40.131 0.86% + xcb evolution 28.241 28.285 0.18% + + After: + backend test min(s) median(s) stddev. + xlib firefox-planet-gnome 47.759 48.233 0.80% + xcb firefox-planet-gnome 48.611 48.657 0.87% + xlib evolution 38.954 38.991 0.05% + xcb evolution 26.561 26.654 0.19% + + And even more dramatic improvements when using a font size larger than + the maximum size of the glyph cache: + xcb firefox-36-20090611: 1.79x speedup + xlib firefox-36-20090611: 1.74x speedup + xcb firefox-36-20090609: 1.62x speedup + xlib firefox-36-20090609: 1.59x speedup + + Signed-off-by: Chris Wilson + +commit 96aa7a236ac0605324a94f7b7d10413cb219f071 +Author: Chris Wilson +Date: Wed Apr 14 15:04:53 2010 +0100 + + i830: Allocate bo's for glyphs larger than 32x32. + + As we only use the glyph cache for small glyphs, those large than 32x32 + will first be copied to a bo and used as a mask in a composite + operation. We can avoid the allocation and upload per use by allocating + a bo for the over-sized glyph from the start. As the glyph is large + anyway, the excess memory allocation is less significant. + + Using normal font sizes, firefox shows no change - as expected. However, + using the 36 font size traces, we see around a 10% improvement on g45. + + Before: + xcb firefox-36-20090609 127.333 127.897 0.22% + xcb firefox-36-20090611 87.456 88.624 0.66% + xcb firefox-20090601 19.522 20.194 1.69% + xlib firefox-36-20090609 201.054 201.780 0.18% + xlib firefox-36-20090611 133.468 133.717 0.09% + xlib firefox-20090601 23.740 23.975 0.49% + + With large glyphs in bo: + xcb firefox-36-20090609 117.256 118.254 0.42% + xcb firefox-36-20090611 79.462 79.962 0.31% + xcb firefox-20090601 19.658 20.024 0.92% + xlib firefox-36-20090609 185.645 188.202 0.68% + xlib firefox-36-20090611 123.592 124.940 0.54% + xlib firefox-20090601 23.917 24.098 0.38% + + Thanks to Owain G. Ainsworth for the suggestion! + + Signed-off-by: Chris Wilson + +commit 2d17bd50af367bead84985c22fdd43d264a5f072 +Author: Chris Wilson +Date: Wed Apr 14 14:54:34 2010 +0100 + + Revert "Revert "uxa: Try using put_image when copying from a memory buffer."" + + This reverts commit 6d50553e8f70d8f2142efdfd6c90bc27a599d0bc. + + Now we have taught the fallback path not to infinitely recurse, + re-enable the accelerated path for ShmPutImage and friends. + +commit 1cc2c2c44ac72460cf1c4e6bdc13c612235809c9 +Author: Chris Wilson +Date: Wed Apr 14 11:18:25 2010 +0100 + + i830: Use pixman_blt directly for performing the in-memory copy + + In order to avoid an infinite recursion after enabling CopyArea to use + the put_image acceleration to either stream a blit or to copy in-place, + we cannot call CopyArea from put_image for the fallback path. Instead, + we can simply call pixman_blt directly, which coincidentally is a tiny + bit faster. + + Signed-off-by: Chris Wilson + +commit 324a2810da3fbae35637ba9080f31f9383db0868 +Author: Daniel Vetter +Date: Tue Apr 13 08:39:43 2010 +0200 + + i830 render: check aperture space requirements + + No point not doing this. + + Signed-off-by: Daniel Vetter + +commit 804263c10df2fedb2f0debab6cdfaa6a89184a42 +Author: Daniel Vetter +Date: Sun Apr 11 12:56:24 2010 +0200 + + render: tell the kernel explicitly when fences are needed + + This slighlty improves xrender performance on fence reg starved + i8xx hw. + + I've also changed a few function calls to the new names from the + compat ones while looking at the code. + + The i915 textured video path is not converted because atm the xv + code does not use tiled surfaces. + + Signed-off-by: Daniel Vetter + +commit a619a7831228dc52f0fef7d92c92f701e5aeaa94 +Author: Daniel Vetter +Date: Thu Apr 8 18:49:01 2010 +0200 + + i915 render: use tiling bits where possible + + This is in preparation to explicit fence allocation with execbuf2. + + Signed-off-by: Daniel Vetter + +commit 55cd36046e61e8d51b5cb754a81cdb54e3eab166 +Author: Daniel Vetter +Date: Thu Apr 8 14:48:35 2010 +0200 + + i830 render: use tiling bits where possible + + This is in preparation to explicit fence allocation with execbuf2. + + Signed-off-by: Daniel Vetter + +commit 6d50553e8f70d8f2142efdfd6c90bc27a599d0bc +Author: Eric Anholt +Date: Mon Apr 12 13:44:31 2010 -0700 + + Revert "uxa: Try using put_image when copying from a memory buffer." + + This reverts commit 27195d7dba0f3ff08b92f3fd916cdf5113cbef58. + put_image often calls copy_area. Which calls put_image. Exhausting of + the stack follows. + +commit 28024f6c5f351ce4cb3434998d5dbfbeded7c606 +Author: Chris Wilson +Date: Mon Apr 12 13:44:01 2010 +0100 + + Revert "uxa: Add fallback warnings for PutImage." + + This reverts commit 299b0338d0811192dc4f8eae5d79453e9882c5d1. + A debugging patch, it was never intended to go into master + +commit 27195d7dba0f3ff08b92f3fd916cdf5113cbef58 +Author: Chris Wilson +Date: Wed Mar 31 20:30:27 2010 +0100 + + uxa: Try using put_image when copying from a memory buffer. + + Often, for example in the fallback for ShmPutImage, we will attempt to + use uxa_copy_area() copying to a normal pixmap from a memory buffer. + This triggers a fallback, and maps the destination pixmap back into the + GTT. The accelerated put_image path will attempt to stream a blit to the + destination pixmap if it is currently active, avoiding the stall. + +commit 385563417d10b5e8a005bed6ae4de9a8fac1b407 +Author: Chris Wilson +Date: Tue Mar 30 21:10:50 2010 +0100 + + Review i830_pad_drawable_width() + + We appear to have a confusion of stride in terms of pixels, pitch in + terms of bytes and the actual width of the surface. + i830_pad_drawable_width() appears to be operating aligning *pixels* to a + 64 pixel boundary and has never used the chars-per-pixel causing + considerable confusion in its callers. Remove the parameter and ensure + that the callers are expecting a value in pixels returned, multiplying + by cpp where necessary to get the pitch. + + Signed-off-by: Chris Wilson + +commit 299b0338d0811192dc4f8eae5d79453e9882c5d1 +Author: Chris Wilson +Date: Thu Mar 25 13:43:26 2010 +0000 + + uxa: Add fallback warnings for PutImage. + +commit 80f52482c7cde000a76b91fe3d8b6c16baf2141f +Author: Daniel Vetter +Date: Thu Apr 8 22:30:33 2010 +0200 + + XvMC: fix memory overflow + + Caught by a malloc library assert. + + Note to self: Don't just copy&paste codelines around :( + + Signed-off-by: Daniel Vetter + Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27540 + Tested-by: Nick Bowler + Tested-by: Calvin Walton + +commit 3d7723526b181686d62f09f81fba3ccdbf7d2b1a +Author: Daniel Vetter +Date: Thu Apr 8 22:21:01 2010 +0200 + + Xv: fixup overlay stride confusion + + For some reason I've made a mess out of the overlay stride constrains. + Fix it up. + + Signed-off-by: Daniel Vetter + Tested-by: Calvin Walton + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27453 + +commit bdf0ee509c26ab35e60f3ed02549efa435be032f +Author: Daniel Vetter +Date: Thu Apr 8 13:29:04 2010 +0200 + + i965 Xv: fix chroma pitch + + In my recent fix for the chroma pitch for i915 xvmc I've forgotten about + i965 class hw. For videos with a non-even sized stride (measured in dwords) + the chroma pitch was internally incosistent and one dword off. + + Fix this by using pitch2 for the chroma pitch in i965 textured video like + everywhere else. + + Signed-off-by: Daniel Vetter + Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27417 + Tested-by: Nick Bowler + Tested-by: Sven Arvidsson + +commit f6cb28e909c8685474e69e8bd8600f146d3a74e9 +Author: Daniel Vetter +Date: Thu Mar 11 15:37:54 2010 +0100 + + libXvMC: rip out debug stuff + + Almost totatlly unused, but surely totally useless. + + Signed-off-by: Daniel Vetter + +commit 676028ec0cbd4fadded92feefc8371e075abcc12 +Author: Daniel Vetter +Date: Wed Mar 10 19:23:06 2010 +0100 + + libXvMC: unify CreateSurface + + Simply store the desired bo size in intel_xvmc_context and initialize + it in the driver's create_context function. + + Signed-off-by: Daniel Vetter + +commit 3f590a4577f554313e7577205e471757a39129b6 +Author: Daniel Vetter +Date: Wed Mar 10 19:04:51 2010 +0100 + + libXvMC i915: kill unused context private fields + + Signed-off-by: Daniel Vetter + +commit 8a31dacb067f813a5b0eafc16d265434e48ec5fc +Author: Daniel Vetter +Date: Wed Mar 10 18:59:29 2010 +0100 + + libXvMC: derive driver context from struct intel_xvmc_context + + ... by putting struct intel_xvmc_surface at the beginning. Also kill + the common context handling code and simply keep a pointer in the + surface private to the context. + + Signed-off-by: Daniel Vetter + +commit 16e5edde4d97e1818e0dbfbc165bd8199f697336 +Author: Daniel Vetter +Date: Wed Mar 10 16:51:10 2010 +0100 + + libXvMC: unify DestroySurface + + Surface bo's can be freed by the common code, then there's nothing + driver specific left. + + Signed-off-by: Daniel Vetter + +commit 5f64122551f2d8d41d745351b2e4e68208aa6084 +Author: Daniel Vetter +Date: Wed Mar 10 16:25:57 2010 +0100 + + libXvMC: drop get_surface_status driver callback + + It's unused. Also drop all related generic code that tries to do + clever stuff with this callback. These are all remnants from a + pre-gem world. + + Signed-off-by: Daniel Vetter + +commit 6c44ce9e127e531224bac825da7918800a3e6a1a +Author: Daniel Vetter +Date: Wed Mar 10 16:20:03 2010 +0100 + + libXvMC i915: s/i915XvMCSurface/struct intel_xvmc_surface/ + + The private surface struct now adds nothing. Drop it. + + Signed-off-by: Daniel Vetter + +commit 583ec1f2f7ed32bb42c98baa1ca0fc3735b69b11 +Author: Daniel Vetter +Date: Wed Mar 10 15:55:44 2010 +0100 + + libXvMC i915: rip out unneeded surface fields + + All of these are also stored in the context. Also kill the context + reference counting. Doesn't serve a purpose besides occupying a + pointer to the context in the private surface struct. + + Signed-off-by: Daniel Vetter + +commit c9aaaed829731cda22d057d6ac6424c587770973 +Author: Daniel Vetter +Date: Wed Mar 10 15:27:02 2010 +0100 + + libXvMC: unify PutSurface + + Now that the drm bo is in the common structure, do the PutImage + handling in common code, too. + + Signed-off-by: Daniel Vetter + +commit 4edff6c972311df2370a8323e346eeabd49ced35 +Author: Daniel Vetter +Date: Wed Mar 10 15:13:41 2010 +0100 + + libXvMC: move drm_intel_bo to common intel_xvmc_surface + + i965 lost the last field in it's private surface struct. Kill it + and any associated headers. + + Signed-off-by: Daniel Vetter + +commit 9eeabf876d1f70f5525bbac438414557dd2d4335 +Author: Daniel Vetter +Date: Wed Mar 10 15:00:58 2010 +0100 + + libXvMC: derive driver surfaces from struct intel_xvmc_surface + + ... by putting struct intel_xvmc_surface at the beginning. This + will allow to consolidate surface and bo handling. + + Also kill some now dead code used to handle the common surface + structure. + + Signed-off-by: Daniel Vetter + +commit a0058369bbdfb49f8df5ee1e50671115927d3565 +Author: Daniel Vetter +Date: Wed Mar 10 14:31:40 2010 +0100 + + XvMC: kill intel_xvmc_command + + We only passed around and actually used the gem handle. Don't + need a struct for one field alone ... + + Signed-off-by: Daniel Vetter + +commit 79fe4caafd21f6ca262901eac4a66ce5a4eaf548 +Author: Daniel Vetter +Date: Tue Mar 9 16:20:33 2010 +0100 + + XvMC: dynamically allocate adaptor + + And kill all the static structures. This way it's clearer what's + common and what's specific. And the code is shorter too. + + Also clean up src/i830_hwmc.c - kill the nonstandard surface types + for i915 and the associated code. + + Signed-off-by: Daniel Vetter + +commit 00b63ecb192b7eafea9482bf5c5c5d442ce2c6fc +Author: Daniel Vetter +Date: Tue Mar 9 15:29:15 2010 +0100 + + XvMC: directly set driver type in context creation + + Instead of threading it through a global variable. + + Signed-off-by: Daniel Vetter + +commit 411cdcb6fcb60085191cf712aba1e0977f145256 +Author: Daniel Vetter +Date: Tue Mar 9 15:23:02 2010 +0100 + + XvMC: init driver in one function call + + No point splitting this up. Gets rid of two #ifdef INTEL_XVMC blocks + in i830_video.c. + + Signed-off-by: Daniel Vetter + +commit b666e3e29f22894f43a8e9f7f3d1b950d431c42d +Author: Daniel Vetter +Date: Tue Mar 9 14:56:44 2010 +0100 + + XvMC: move i965 specific stuff to common context + + Like for the i915. With this create_context is now also shared. + + Signed-off-by: Daniel Vetter + +commit e0068b1e63bc914940dbeb52de46657fcf5da1ea +Author: Daniel Vetter +Date: Tue Mar 9 14:44:53 2010 +0100 + + XvMC: move i915 specific stuff to common context + + Doing the same with the i965 code will allow us to share the + create_context function. + + src/i915_hwmc.h is now almost empty. Move the last #defines to + src/xvmv/i915_xvmc.c where they are actually used and delete the + file. + + Also rename the ddx context struct to something sane. + + Signed-off-by: Daniel Vetter + +commit 8cab7b84da6d06c20ad9dbbcd8f3f3d971b438e7 +Author: Daniel Vetter +Date: Tue Mar 9 14:02:23 2010 +0100 + + XvMC: unify destroy context function + + Signed-off-by: Daniel Vetter + +commit 323464b8e2669423df573a18fd1137cb3cad6700 +Author: Daniel Vetter +Date: Mon Mar 8 23:46:25 2010 +0100 + + XvMC: clean up i830_hwmc.c + + - Drop unnecessary macros + - Denote i965 specific stuff + + Signed-off-by: Daniel Vetter + +commit cfa907adf800e91a3c1f4698ac701b9b83fa600b +Author: Daniel Vetter +Date: Mon Mar 8 23:41:56 2010 +0100 + + XvMC: unify surface functions + + Like for the subpicture stuff, share the "do-nothing" functions ... + And fix function name spelling, too. + + Signed-off-by: Daniel Vetter + +commit 036cd4bb82131c08b79f596667f00b19a0c8ab79 +Author: Daniel Vetter +Date: Mon Mar 8 17:33:18 2010 +0100 + + i965 XvMC: don't create any surface state in the ddx + + Like for i915. Also drop that now totally superflous limit on the + available surfaces. + + Move the surface struct into the userspace library header now that + the ddx doesn't use it anymore. + + Signed-off-by: Daniel Vetter + +commit 69218cc1b51acfee91b471bb973a4419b79cdd85 +Author: Daniel Vetter +Date: Mon Mar 8 17:05:25 2010 +0100 + + XvMC: unify subpicture functions + + The XvMC driver api in the server is insane. Even for optional stuff + like subpicture support it doesn't check for NULL-pointers. So we + have to retain some dummy functions. + + Wonder how many copies of these things exist on fdo ... + + Signed-off-by: Daniel Vetter + +commit 5d104e9c5cd5cd2d34c9035dd38794fa9b5578f3 +Author: Daniel Vetter +Date: Mon Mar 8 17:03:36 2010 +0100 + + XvMC: unify PutImage handling + + Both xvmc are handing in the bo in the exact same way. So move the code + to src/i830_video.c and kill this great oeuvre of spaghetti-code. + + The xvmc driver ini and fini also lost their last use, kill them, too. + + Signed-off-by: Daniel Vetter + +commit ebc0ffba79cc4bd564a8bd97327f24a1d15b3d1a +Author: Daniel Vetter +Date: Mon Mar 8 16:36:24 2010 +0100 + + XvMC: merge *_hwmc.c into i830_hwmc.c + + After unifying i915 and i965, not much will be left of these files. + Therefore merge them to make the following changes easier. + + This creates some warnings about some redefined macros, but when this + is all cleaned up they'll all be gone. + + Signed-off-by: Daniel Vetter + +commit 8199f8f191f8385ef3a228e0ec014a8bbd44002b +Author: Daniel Vetter +Date: Sun Mar 7 23:17:49 2010 +0100 + + i915 XvMC: kill more subpict support remnants + + This things just won't die! + + Signed-off-by: Daniel Vetter + +commit 29ba8a84f7cf5c29a5f38688a1ac0ccf41d8e4ec +Author: Daniel Vetter +Date: Sun Mar 7 23:16:28 2010 +0100 + + XvMC: everyone's using execbuffer! + + XvMC was switched over from batchbuffers a few years ago ... + + Signed-off-by: Daniel Vetter + +commit 440b4d207b730112169827d0b90b46596659b504 +Author: Carl Worth +Date: Mon Mar 29 11:20:20 2010 -0700 + + Increase version to 2.11.0 + + In preparation for release. + +commit 1119c4523889ddedecf1722f0e9a2e4a7ad326b2 +Author: Carl Worth +Date: Mon Mar 29 11:19:31 2010 -0700 + + NEWS: Add release notes for the 2.11.0 release. + + Hurrah! We made it. + +commit df3b26847914557eb3c9c70732d91169b1936d77 +Author: Jesse Barnes +Date: Fri Mar 26 10:44:55 2010 -0700 + + DRI2: release our private front buffer ref when buffer swapping + + Pauli pointed out that we take a ref on the front buffer when exchanging + but forget to release it. The ref is necessary since the set functions + will drop refs as necessary, but once we set the front buffer to point + at the back pixmap, we ned to release our private ref again, or we'll + leak buffers. + + Reported-by: Pauli Nieminen + Signed-off-by: Jesse Barnes + +commit 362a49e71fc41541b6dc121660d98e29da4b14e8 +Author: Gaetan Nadon +Date: Thu Mar 25 10:07:41 2010 -0400 + + uxa make: remove unused XORG_INCS and DIX_CFLAGS variables + + Most likely copied from xserver makefile. + + Acked-by: Dan Nicholson + Signed-off-by: Gaetan Nadon + +commit 0d1ac4da5288a621d0493cb109fcd1e040e6c5a7 +Author: Chris Wilson +Date: Thu Mar 25 09:12:09 2010 +0000 + + uxa: Perform the xrgb -> argb conversion not inplace + + After reports of segmentation faults caused by + d6b7f96fde1add92fd11f5a75869ae6fc688bf77 and vmware, the most obvious + cause would be illegally writing to the src data when performing the alpha + fill inline. So force the image upload to go via a fresh buffer whenever + we need to modify the incoming data. + + Signed-off-by: Chris Wilson + Reported-and-tested-by: Jeff Chua + +commit 0c47195ca805881e3fbd5b9224be5c930feeeb8c +Author: Chris Wilson +Date: Wed Mar 24 17:37:39 2010 +0000 + + i830: Clip solid fills to surface. + + There is a reasonable surfeit of evidence to support this error, + for instance: http://bugs.freedesktop.org/attachment.cgi?id=34417 + + Signed-off-by: Chris Wilson + +commit 5537079c29a56133446f1874d24d9e6516825edb +Author: Chris Wilson +Date: Wed Mar 24 14:59:20 2010 +0000 + + uxa: After filling the alpha channel xrgb src is compatible with argb dst. + + Signed-off-by: Chris Wilson + +commit 90a971c60769781f53827b469a9be3aab14cf71c +Author: Chris Wilson +Date: Wed Mar 24 14:50:45 2010 +0000 + + uxa: Only reduce a composite to a BLT if it is wholly contained + + Signed-off-by: Chris Wilson + +commit 2eec53d0b9232970fe3d03ce6c8940ebeea44bee +Author: Chris Wilson +Date: Tue Mar 23 17:28:22 2010 +0000 + + uxa: Default to using TILING_X for pixmaps. + + On memory constrained hardware, tiling is vital for good performance as + it minimizes cache misses. The downside is that for older hardware + (which often suffers from the lack of bandwidth) requires the use of + fences for many operations, which are in short supply and so may cause + shorter batchbuffers. However our batch buffers are typically short and + so this is unlikely to be a concern and not affect the performance wins. + + A quick bit of testing suggests the effect is inconclusive on + firefox/i945: + linear tiled + xcb 205.470 206.219 + xcb-render-0.0 404.704 388.413 + xlib 166.410 170.805 + + A secondary effect of the patch is to workaround a G31 specific hang + when attempting to use linear 2048x2048 surfaces. Bonus! + + Fixes: + Bug 25375 - Performance issue using texture from pixmap (tfp) glx extension on 945 + http://bugs.freedesktop.org/show_bug.cgi?id=25375 + + Bug 27100 - GPU Hung copying a 2048x1152 pixmap + http://bugs.freedesktop.org/show_bug.cgi?id=27100 + + Signed-off-by: Chris Wilson + Tested-by: John + +commit 9c037f61a490c96f9095f7ff3fecbf41f5efe9f7 +Author: Carl Worth +Date: Mon Mar 22 15:23:04 2010 -0700 + + Update version to 2.10.903 + + For today's snapshot. + +commit 11142cffe4bc81e1ce465ea725fcaef024130082 +Author: Carl Worth +Date: Mon Mar 22 15:22:28 2010 -0700 + + NEWS: Add notes for 2.10.903 + + For today's snapshot. + +commit f206816154fd44e61b0bdeaab1aa4c5359c3b70a +Author: Carl Worth +Date: Mon Mar 22 14:14:46 2010 -0700 + + man: Update list of available 'sclaing mode' property values. + + Include the names from the current kernel driver along with accurate + descriptions of each. Indicate how to use the values with: + + xrandr --output output --set property value + + and point the user to "xrandr --prop" for an accurate list of + currently available values. + + Closes bug: + + xf86-video-intel manpage needs update for KMS xrandr properties + http://bugs.freedesktop.org/show_bug.cgi?id=25606 + +commit d1dfab6b1649214177435629d8e85239dbe44d89 +Author: Matthias Hopf +Date: Wed Mar 17 15:13:51 2010 +0100 + + Clear drmmode_output->mode_output in drmmode_output_destroy(). + +commit 10cd04a84bcb6313903fc23b2d7791658ebc6b8e +Author: Li Peng +Date: Sat Mar 20 00:21:48 2010 +0800 + + Initialize flip_count before using it + + Otherwise it would be a random value and drmmode_page_flip_handler() + won't have a chance to call I830DRI2FlipEventHandler() and indicate + a full page flip is complete. + + Signed-off-by: Li Peng + +commit 3d4b3f257fbbb69c6f236d9803abe54a90d7d434 +Author: Dave Airlie +Date: Thu Mar 18 12:48:39 2010 +1000 + + intel: free bus id in error path after printing it out. + + the error message prints out a freed string, spotted during + code reappropriation to radeon driver. + + Signed-off-by: Dave Airlie + +commit 31d5f84bb4416ef92abd97264d52cdab7a184687 +Author: Chris Wilson +Date: Wed Mar 17 09:11:05 2010 +0000 + + i915: Correct preamble for emit_composite + + Fixes: + http://bugs.freedesktop.org/show_bug.cgi?id=27123 + + Fatal server error: + i915_emit_composite_setup: ADVANCE_BATCH: under-used allocation 100/104 + + Introduced with commit d6b7f96fde1add92fd11f5a75869ae6fc688bf77. + + Signed-off-by: Chris Wilson + +commit d6b7f96fde1add92fd11f5a75869ae6fc688bf77 +Author: Chris Wilson +Date: Sat Mar 6 15:49:04 2010 +0000 + + Fill alpha on xrgb images. + + Do not try to fixup the alpha in the ff/shaders as this has the + side-effect of overriding the alpha value of the border color, causing + images to be padded with black rather than transparent. This can + generate large and obnoxious visual artefacts. + + Fixes: + + Bug 17933 - x8r8g8b8 doesn't sample alpha=0 outside surface bounds + http://bugs.freedesktop.org/show_bug.cgi?id=17933 + + and many related cairo test suite failures. + + Signed-off-by: Chris Wilson + +commit 910fd171a00227025abc8bcc286a740f5bae895b +Author: Chris Wilson +Date: Fri Mar 5 14:32:13 2010 +0000 + + i830: Remove coord-adjust for nearest centre-sampling. + + Fixes a number of cairo test suite failures. + + Also affects: + Bug 16917 - Blur on y-axis also when only x-axis is scaled bilinear + http://bugs.freedesktop.org/show_bug.cgi?id=16917 + + Signed-off-by: Chris Wilson + +commit 753914acc31947df8e9f2fa3b9c39de745098709 +Author: Carl Worth +Date: Mon Mar 15 17:32:57 2010 -0700 + + Bump version to 2.10.902 + + For the imminent 2.10.902 snapshot release. + +commit 185196cb010cb8426ca929a9dc3f028ec9b383db +Author: Carl Worth +Date: Mon Mar 15 17:32:20 2010 -0700 + + NEWS: Add notes for the 2.10.902 snapshot. + + Which I'm about to push out. + +commit 318aa9ed799197810e2039dbe3ec51559dcc888c +Author: Daniel Vetter +Date: Mon Mar 8 23:22:53 2010 +0100 + + i915 XvMC: fixup colors + + My cleanup accidently created a inconsistency in the YUV plane ordering. + I think we can safely assume that I'm colorblind ;) + + As Carl Worth rightly pointed out, this change deserves a more elaborate + explanation: + + For Xv planar formats, the three planes are stored consecutively in + memory, ordered Y U V. Now for some totally odd reason (= none at all), + i915 xvmc stored it in Y V U order. Right after the release of 2.10, with + commit "Xv: consolidate xmvc passthrough handling" I've inadvertently + broken xvmc support (which started this whole odyssey into xvmc). When + fixing stuff up, I neglected this special plane ordering and simply + assumed it to be the same as Xv and dropped that special case for i915 in + src/i830_video.c. This patch completes the change to standard YUV plane + ordering by making the corresponding change in src/xvmc/i915_xvmc.c. + + Signed-off-by: Daniel Vetter + +commit 68629b63740fb6e62c258b8a46669e77660fa4e4 +Author: Jesse Barnes +Date: Mon Mar 8 15:42:39 2010 -0800 + + DRI2: make WaitMSC error handling more consistent with ScheduleSwap + + Just make it mirror ScheduleSwap: complete the wait on any error + condition so as not to crash the client if the kernel is misbehaving. + + Signed-off-by: Jesse Barnes + +commit 6df74e61afb7831ebf3fbab8782f46ddccbe262b +Author: Jesse Barnes +Date: Mon Mar 8 15:33:20 2010 -0800 + + DRI2: truncate OML values to 32 bits + + We can only handle 32 bit values unless we totally virtualize the count, + since the kernel only handles 32 bits itself. Rather than adding all + that overhead, just tolerate the occasional missed event everytime the + counter runs over. + + Reported-by: Mario Kleiner + Signed-off-by: Jesse Barnes + +commit c66d57080dc034aa7877f47612065e388bbc38a2 +Author: Jesse Barnes +Date: Mon Mar 8 15:26:24 2010 -0800 + + DRI2: more WaitMSC fixes + + A couple more niggles: make sure we return a target_msc that at least + matches the current count; this is a little more friendly to clients + that missed an event. Also check for >= when calculating the remainder + so we'll catch the *next* vblank event when the calculation is + satisfied, rather than the current one as might happen at times. + + Reported-by: Mario Kleiner + Signed-off-by: Jesse Barnes + +commit 7845c6ade82085488192bd76729d92fb7b534cc0 +Author: Jesse Barnes +Date: Mon Mar 8 15:19:14 2010 -0800 + + DRI2: fixup stray curly brace + + Got left in the wrong column after the last cleanup. + + Signed-off-by: Jesse Barnes + +commit 9656d329e4df28cfe138b657d04e5136bc794ce2 +Author: Eric Anholt +Date: Mon Mar 8 14:34:04 2010 -0800 + + Put back the pitch alignment for new framebuffers. + + I confused a dead assignment with dead code, because one of the args + to the function was an outvalue. Fixes corruption under compiz. + + Bug #26814. + +commit b71ca26a026a356763c51c763bcdd8024fc4a783 +Author: Jesse Barnes +Date: Mon Mar 8 11:27:42 2010 -0800 + + DRI2: fixup ScheduleWaitMSC similarly to ScheduleSwap + + My merge of Mario's patch for this was botched. Fix it up so that OML + waits work correctly, and remove a bogus warning from ScheduleSwap. + + Reported-by: Mario Kleiner + Signed-off-by: Jesse Barnes + +commit 06b54e089eb21736e6d4f6462bbfca987be0c5cc +Author: Matt Turner +Date: Sun Mar 7 14:27:27 2010 -0500 + + Don't check for Xinerama. + + It doesn't seem to be used anywhere, so don't require it. + + CC: Eric Anholt + CC: Jesse Barnes + Signed-off-by: Matt Turner + +commit 8ece6cf5afa1bb0d8d9328696422f42f3c3adbd6 +Author: Robert Hooker +Date: Sat Mar 6 14:09:12 2010 -0500 + + Fix build against xserver 1.6 branch. + + Signed-off-by: Robert Hooker + Reviewed-by: Chris Wilson + +commit 1cd556420277f103c47ade422f3ec8f8efb2d282 +Author: Mario Kleiner +Date: Fri Mar 5 12:32:18 2010 -0800 + + DRI2: handle target_msc, divisor and remainder properly in DRI2ScheduleSwap + + The current code in I830DRI2ScheduleSwap() only schedules the correct + vblank events for the case divisor == 0, i.e., the simple + glXSwapBuffers() case. + + In a glXSwapBuffersMscOML() request, divisor can be > 0, which would go + wrong. + + This modified code should handle target_msc, divisor, remainder and the + different cases defined in the OML_sync_control extension correctly for + the divisor > 0 case. + + It also tries to make sure that the effective framecount of swap + satisfies all constraints, taking the 1 frame delay in pageflipping mode + and possible delays in blitting/exchange mode due to + DRM_VBLANK_NEXTONMISS into account. + + The swap_interval logic in the X-Servers DRI2SwapBuffers() call expects + the returned swap_target from the DDX to be reasonably accurate, + otherwise implementation of swap_interval for the glXSwapBuffers() as + defined in the SGI_swap_interval extension may become unreliable. + + For non-pageflipped mode, the returned swap_target is always correct due + to the adjustments done by drmWaitVBlank(), as DRM_VBLANK_NEXTONMISS is + set. + + In pageflipped mode, DRM_VBLANK_NEXTONMISS can't be used without severe + impact on performance, so the code in I830DRI2ScheduleSwap() must make + manual adjustments to the returned vbl.reply.sequence number. + + This patch adds the needed adjustments. + + Signed-off-by: Mario Kleiner + +commit 13119ffc034a3e9d6c76339d4fedc62bb3b41257 +Author: Mario Kleiner +Date: Fri Mar 5 11:33:45 2010 -0800 + + DRI2: make MSC waits handle specific target_mscs and divisor/remainders + + Previous code only handled divisor == 0 case correctly. This should + honor a given target_msc for the divisor > 0 case and handle the + (msc % divisor) == remainder constraint correctly. + + Signed-off-by: Mario Kleiner + +commit b6e0b92f398823629ba8a1ea8f5e62fbf959e725 +Author: Jesse Barnes +Date: Thu Mar 4 10:07:26 2010 -0800 + + DRI2: handle offscreen drawables better at swap time + + If a drawable isn't visible due to DPMS or redirection, we'll just blit + it rather than schedule a swap event. However, we didn't reset the + target_msc, so the swap target we receive from the server could get out + of sync with the vblank count of the drawable's display. So at DPMS on + time, the swap target would be the last good vblank count plus some + large number (since the swaps won't have been throttled). + + Solve this by zeroing out the swap target like we should when we fall + back to a blit. Also make the kernel error cases more friendly by + making them fall back to blits too. + + Signed-off-by: Jesse Barnes + +commit 54ac4e2df987b72529a523ffbde357bec27e3658 +Author: Chris Wilson +Date: Thu Mar 4 21:34:52 2010 +0000 + + Rate limit batch buffer error. + + Once we hit this error it's unlikely that we're coming back - so don't + flood the logs with redundant information. + + Signed-off-by: Chris Wilson + +commit 066d9b64ee243e0d255d7e12c2134951eef4ade7 +Author: Daniel Vetter +Date: Thu Mar 4 20:50:20 2010 +0100 + + i915 XvMC: kill dead code + + This kills one wip remnant from my i830_memory cleanup and the last + remainings of the subpicture support. + + Signed-off-by: Daniel Vetter + +commit 7b7c724da97f358f5d2d4d4dae75cfc85bde2c62 +Author: Eric Anholt +Date: Thu Mar 4 10:29:09 2010 -0800 + + Remove remaining fbOffset setting. + + In the long long ago, fbOffset was used for DGA. The server now has + only one reference to fbOffset, a leftover setting of it in fbdevhw. + We can safely ignore it now, which is good since we weren't updating + it in other places where the front buffer offset could change. + +commit 15026d64d3c0d8ad96e0a73fcae3103d1c41fd46 +Author: Eric Anholt +Date: Thu Mar 4 10:28:09 2010 -0800 + + Remove a piece of fbOffset cruft from non-DRM support. + +commit e8e615289213ba1704e402b923c51ce9d196f06f +Author: Eric Anholt +Date: Thu Mar 4 10:27:51 2010 -0800 + + Remove i830_allocate_2d_memory() now that it only called one function. + +commit e37b562083aa3293e0c009171724a3f122d8a32d +Author: Eric Anholt +Date: Thu Mar 4 10:23:12 2010 -0800 + + Init CRTC cursors with CRTC setup instead of i830_memory. + +commit a36bdaba6136054ae7c67943ca0215cfd177bc5b +Author: Eric Anholt +Date: Thu Mar 4 09:47:10 2010 -0800 + + Remove intel_sync() at teardown time. + + The kernel's still running after we're gone. This didn't matter. + +commit 4ada6d7a856a941b834871ff8a7c5505ff26ae23 +Author: Eric Anholt +Date: Thu Mar 4 09:32:42 2010 -0800 + + Remove 3D state clobber on EnterVT, and always clobber at batch start. + + We know that it's clobbered at each batchbuffer, anyway. And even if + this server isn't running DRI2, it can still be clobbered at batch + start in the KMS world. + +commit d92d42303e5ca9f4208ed97823ad8f691121370f +Author: Eric Anholt +Date: Thu Mar 4 09:31:56 2010 -0800 + + Remove pre-2.6.29 error message handling since we require KMS. + +commit faecd155c49229499e29815eb6e79662ed33ddd5 +Author: Eric Anholt +Date: Thu Mar 4 09:31:15 2010 -0800 + + Move batch and 965 render state setup/teardown to screen init/close. + + Whether we're VT switched or not shouldn't impact rendering. + +commit 74e2b69a317cc728b00e675c18d2976987407aec +Author: Carl Worth +Date: Thu Mar 4 09:51:03 2010 -0800 + + i915_hwmc: Remove dead code. + + Daniel recently identified this code as unneeded (with an #if 0). + Here we take the next step and remove it entirely. + +commit 1cc35a8ba403ad95b67caff46b803db1edea5ad3 +Author: Carl Worth +Date: Thu Mar 4 09:46:33 2010 -0800 + + uxa: Fix type mismatch to avoid compiler warning. + + The code was using uint32_t where an XID (currently an unsigned long) + was specified in the prototype. Use XID to avoid both the warning and + any potential problem. + +commit 1d6537ec57535183638c62e3099bc79786c682ca +Author: Carl Worth +Date: Thu Mar 4 09:39:28 2010 -0800 + + i830_video: Remove unused variable. + + Certainly just a little leftover from the recent rewrites. + +commit 57c0043b9a519da5c9af29019ef632716782bda2 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:33 2010 +0100 + + Xv: fixup relocation in i965_video.c + + The previous code made no sense, (multiplying an offset by 4 is + meaningless). It could have onlt worked with the offset being + fortuitously 0. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit e606be463f6359fd017791a8d4d85059831a5d41 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:28 2010 +0100 + + i830_memory: rip out the remainings of the old allocator + + Yeah! + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 371be65fb74789250dbb1e332e46416d931da321 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:27 2010 +0100 + + XvMC: kill the pinned batchbuffer in the ddx code + + It's been unused for quite a while. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit d5a20c81ab76129a1e0bcefecd9c4a10b5040af4 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:26 2010 +0100 + + i915 XvMC: kill pinned surface buffer in the ddx code + + Like with the per context stuff, also drop the now artificial limit + on surfaces. Again, with that gone, a lot of code can be deleted. + + Reviewed-by: Carl Worth + +commit e6eb257ad32b393fb67c506943d8ece98b9a8061 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:25 2010 +0100 + + i915 XvMC: kill pinned per-context buffers in the ddx code + + There's now not a reason anymore to limit the number of active contexts. + So kill this accounting, too. + + With that all gone, per-context state in the ddx is nil, so rip out + all associated code. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 47ae1181f6cfd2ab64cd5c8535289fdaa2a9fd9c +Author: Daniel Vetter +Date: Tue Mar 2 21:53:24 2010 +0100 + + i915 XvMC: don't stall the cpu anymore + + Proper bo management ensures that the cpu doesn't step on buffers + used by the gpu. Drop the now unnecessary synchronization. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 9bba123c5f0f081562306c152e70221fc5041a3b +Author: Daniel Vetter +Date: Tue Mar 2 21:53:23 2010 +0100 + + i915 XvMC: drop superflous MI_FLUSH + + Cache coherency is now fully under the control of gem. + + For lack of hw documentation, I had to find out the correct cache + placements by trial and error: + + Backward and forward surfaces: I915_GEM_DOMAIN_RENDER + Correlation data: I915_GEM_DOMAIN_SAMPLER + + Changing any of them leads to visual corruptions, so I think these + are the correct ones. + + Reviewed-by: Carl Worth + +commit b11623f20e303ae1d90d4a6bf0d5d73970b4e9bf +Author: Daniel Vetter +Date: Tue Mar 2 21:53:22 2010 +0100 + + i915 XvMC: switch surfaces to drm_intel_bo + + Now the last user of the fixed buffers provided by the ddx is gone! + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit b7f79bfd40db3ed17d7a79750d007b57d7ed157a +Author: Daniel Vetter +Date: Tue Mar 2 21:53:21 2010 +0100 + + i915 XvMC: switch corrdata buffer to drm_intel_bo + + It works! + + v2: Correlation data needs to be in the render cache! + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 62846d88d41f1bbbd16a6e700ca611656fa20f61 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:20 2010 +0100 + + i915 XvMC: switch msb to drm_intel_bo + + Like for the static indirect state buffer. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit d27955c697e1768559957da8d61087644befd285 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:19 2010 +0100 + + i915 XvMC: switch sis to drm_intel_bo + + I've decided to allocate a new buffer for every render command, to + prevent stalling for the gpu. libdrm bo reuse should take care of + not wasting memory in case the buffer is not busy. + + Also always emit the full state, it's not worth it to complicate + the code over a few stores to wc memory. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 3203c66fbf04c55adba760e97c9fa1feb9e55f8d +Author: Daniel Vetter +Date: Tue Mar 2 21:53:18 2010 +0100 + + i915 XvMC: switch load_indirect_render_emit to batchbuffer macros + + Like with one_time_state_emit, this preps for relocatable bo's. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit d30decae6a9db585f2d2589ae2c3d9e1f9acd33d +Author: Daniel Vetter +Date: Tue Mar 2 21:53:17 2010 +0100 + + i915 XvMC: switch psc to drm_intel_bo + + Like with the sampler state buffer. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit b543c355f4fdcb64deb198765d9b8b86f7c234c2 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:16 2010 +0100 + + i915 XvMC: switch psp to drm_intel_bo + + Like with the sampler state buffer. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 18c364084ce5495ffdfea38c17c1297d555c6c54 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:15 2010 +0100 + + i915 XvMC: switch ssb to drm_intel_bo + + This also starts to kill the last remnants of the support for + physical addresses for the indirect state buffers. With gem this + would need kernel support (in the form of a new reloc type in + execbuf2). + + This does not change the ABI between ddx and client libIntelXvMC. + I've decided to do this in one swoop when all the buffer rework is + done. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit fc9e44f01910eb9fd43def9b2ac531b0742d8b4e +Author: Daniel Vetter +Date: Tue Mar 2 21:53:14 2010 +0100 + + i915 XvMC: kill last_flip and last_render + + Seems to be a remnant from i810 XvMC support. last_flip is always 0, + so serves no real purpose anymore. Kill it and the associated code. + + With last_flip gone, last_render also lost its purpose. Kill it, too. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 04aa38a639fefcd00acb485f36ab18c2083ed1bb +Author: Daniel Vetter +Date: Tue Mar 2 21:53:13 2010 +0100 + + i915 XvMC: switch one_time_state_emit to batchbuffer macros + + This is in preparation for real relocatable drm_bo's instead + of memory at a fixed address. By switching to the batchbuffer + macros (like i965 xvmc) we can use the nice OUT_RELOC macro. + + Also align the code more with coding-style elsewhere, i.e. bitops + instead of bitfield structures. The bitfield structures are + quite a mess to work with the batchbuffer macros, so they were + getting in the way, anyway. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 24d787335a0c319b8d9243ea1f2726575cf73b2b +Author: Daniel Vetter +Date: Tue Mar 2 21:53:12 2010 +0100 + + XvMC: kill dead code in i915_xvmc.c + + WIP code that hasn't changed for over two years is unlikely to + suddenly start progressing. Drop it. After all, git can easily + resurect it in cases it's needed. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit 13266b152ae35ed54984844e3282cbdf20dc2e32 +Author: Daniel Vetter +Date: Tue Mar 2 21:53:11 2010 +0100 + + XvMC: kill i830_memory in 965 class xvmc + + Yes, this breaks binary compat of the struct passed around between + X ddx and the client libXvMC. But we always ship both, so they should + not get out of sync. + + Signed-off-by: Daniel Vetter + Reviewed-by: Carl Worth + +commit d39d822cf887a861b37cee92c0b59533370ded2f +Author: Daniel Vetter +Date: Tue Mar 2 09:22:44 2010 +0100 + + i830_memory: hide as much of the old memory allocator as possible + + The only user left of this stuff is the xvmc support. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 65267d4bfbf19942beab72858333c6ee3c719223 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:43 2010 +0100 + + i830_memory: switch frontbuffer to drm_intel_bo + + Yet another user of i830_memory gone for good. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 06f147dc04629a8a1534703be570e7f25e41cdd9 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:42 2010 +0100 + + i830_memory: switch cursors to drm_intel_bo + + Minus one user of i830_memory, some more to go. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 23d12e3b088f38d25e83d6501d553d98be442d49 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:41 2010 +0100 + + i830_memory: kill field "pitch" + + Totally unused. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 2fb8feeb56fae364380ffd91749eeb69fb461cff +Author: Daniel Vetter +Date: Tue Mar 2 09:22:40 2010 +0100 + + i830_memory: rip out field "size" + + Use the one in the drm bo instead. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 4d4d763b3d96e2cac99a0b7b03ad9bcaf4465c61 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:39 2010 +0100 + + i830_memory: kill field "tiling_mode" + + Totally unused. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit d0800d098739d5e8ea94be9c5ed2f7a8a86c06dc +Author: Daniel Vetter +Date: Tue Mar 2 09:22:38 2010 +0100 + + i830_memory: no memory allocations without a bo! + + Kill the corresponding !bo path in i830_free_memory. + + Also kill another remnant of the pre-kms era in the same file, while I + was looking at the code. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 086c0e25cac1d3dd0a37def8b5cb82c1c6279edf +Author: Daniel Vetter +Date: Tue Mar 2 09:22:37 2010 +0100 + + i830_memory: rename i830_bind_all_memory to reflect code reality + + It doesn't bind anything anymore, but does a few random things. + Give it a hopefully vague enough name to cover all cases ;) + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 2a989aa057cee74154419fd0a4911ba1e95582cf +Author: Daniel Vetter +Date: Tue Mar 2 09:22:36 2010 +0100 + + i830_memory: rip out the old video memory allocator + + Besides the debug stuff the went away in the previous patch, + this stuff was totally unused ... + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit bf83b9a10254966cb73b24e08954154d4296dac3 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:35 2010 +0100 + + i830_memory: kill i830_desribe_allocations + + Totally useless debug function from the pre-gem era. No point + to occasionally spam Xorg.log with a bogus "No memory allocations" + message. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit ff8a1e1cf728eeae848f6284bb4272193dfa918b +Author: Daniel Vetter +Date: Tue Mar 2 09:22:34 2010 +0100 + + i830_memory: rip out field "offset" + + Use the one in the drm bo instead. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit e18ffceb142a9e18968900dd526a2d50fab72900 +Author: Daniel Vetter +Date: Tue Mar 2 09:22:32 2010 +0100 + + i830_memory: rip out field "end" + + It's a left-over from the non-gem era and no longer used at all. + + Signed-off-by: Daniel Vetter + Reviewed-by: Eric Anholt + +commit 5018fd3097d77a5f31af4cb27e39daa37557b64e +Author: Daniel Vetter +Date: Mon Mar 1 22:57:40 2010 +0100 + + libIntelXvMC: kill ums leftovers + + On i965 class hw, kernel_exec_fencing was 1 always, anyway. And on + i945, this patch kills a memory leak (dunno how, but it does). + + Signed-off-by: Daniel Vetter + +commit cb06aa32d433f54affe87da2cf964f0308d3c258 +Author: Daniel Vetter +Date: Mon Mar 1 22:57:39 2010 +0100 + + Xv: fixup XvMC on i915 + + I've accidentally broken i915 xvmc due to alignment constrains that + break my assumption that Y-pitch == UV-pitch*2. Fix this up by consistenly + using dstPitch2 for the Y-pitch. This also unifies the dst pitch + computation slightly, now that the i915 xvmc special case is gone. + + Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=25949 + + Signed-off-by: Daniel Vetter + + (Minor edit to support compilation without INTEL_XVMC defined by + Carl Worth ) + +commit 80f2a1f3b5e477a12899ea2251aebcfa62689943 +Author: Daniel Vetter +Date: Mon Mar 1 22:57:38 2010 +0100 + + Xv: fixup YUV plane offset for xvmc case + + In my previous cleanup I've inadvertedly dropped the offset adjustment + code for the xvmc passthrough case. Fix this up. + + Also reimplement that ugly hack I've accidently killed to keep i915 class + xvmc a tad bit longer on life support. + + Signed-off-by: Daniel Vetter + Tested-by: xunx.fang@intel.com + +commit a0ee9c3d9c72962c8d513ec8c43dd4a21e316947 +Author: Carl Worth +Date: Fri Feb 26 17:05:45 2010 -0800 + + Update version number to 2.10.901 + + In order to make a new snapshot. + +commit 63b8e890a134e5fc8242b655115491a3905ad0ff +Author: Carl Worth +Date: Fri Feb 26 17:05:06 2010 -0800 + + NEWS: Add notes for the 2.10.901 snapshot. + + From skimming the git lot since 2.10.0. + +commit d5409303128f5c9ba940ab564ff407a82eabc597 +Author: Carl Worth +Date: Fri Feb 26 16:12:50 2010 -0800 + + Remove dead code: fill_detailed_lvds_block + + All callers of this function were recently removed, so it can join + them in the bit bucket. + +commit 7d0e6ff4dadcf243b1006ce6f85bd06c5f4e4908 +Author: Adam Jackson +Date: Wed Dec 2 12:05:52 2009 -0500 + + kms: Fix LVDS mode list construction. + + Rather than mangle the EDID block and hope the server does the right + thing, just build a sensible mode list up front. Do this for LVDS where + there is no EDID or where it does not claim to be continuous-frequency + (since in the latter case, the server will add reasonable modes for us). + + Signed-off-by: Adam Jackson + +commit 1730af4437530ab7f6fe6ca74b16efb4a843b3ae +Author: Carl Worth +Date: Thu Feb 25 17:12:49 2010 -0800 + + NEWS: Fix typo (we just released 2.10 *not* 1.10) + + Sigh. Every version number that must be typed manually will eventually + be typed incorrectly at some release. (I think that's Owne Taylor's + Law) + +commit 529bf185fbcb9f7705b315a5106054ee25c1c77f +Author: Eric Anholt +Date: Wed Feb 24 17:54:13 2010 -0800 + + In frame event handling, track drawable id instead of drawable pointer. + + Windows aren't refcounted, so if the event came in after the window + was destroyed, we'd dereference garbage and segfault. + +commit 633c7033170b0e9b468dbee444b94922f6c30940 +Author: Eric Anholt +Date: Wed Feb 24 17:40:30 2010 -0800 + + Fix up a bunch of inconsistent 4-space indentation in i830_dri.c + +commit 9291828a569a01ed4a6ef71f530b93f8a54c84aa +Author: Eric Anholt +Date: Fri Jan 15 12:51:50 2010 -0800 + + Add new mobile Sandybridge PCI IDs. + +commit 3c71f98b9e5262675e61fafb317d0c35e62a873f +Author: Eric Anholt +Date: Thu Oct 22 16:55:02 2009 -0700 + + Add initial defines and probing for Sandybridge + +commit c2c670ef18755cf5c878edf8a6b7d1617f54fe73 +Author: Eric Anholt +Date: Fri Feb 19 12:54:48 2010 -0500 + + Remove more DRI1 dead code. + +commit b320449f75adf912e06832dacc0b861ce26353bd +Author: Eric Anholt +Date: Fri Feb 19 12:44:11 2010 -0500 + + Remove dead i830_ring.h. + +commit 6d48b26098691d772a8de001c89a05b2442ef3b5 +Author: Eric Anholt +Date: Fri Feb 19 12:27:55 2010 -0500 + + Remove dead i830_display.h. + +commit 4126f73051aa73defcf342c81aa0fc9062f83f90 +Author: Eric Anholt +Date: Fri Feb 19 12:25:47 2010 -0500 + + Remove dead i830_bios.h. + +commit ca173c1eaf0e28f7fa138b1965f5e768b3add895 +Author: Eric Anholt +Date: Fri Feb 19 12:24:00 2010 -0500 + + Remove the last tool now that it's been moved to gpu_tools. + +commit 6da7cda5830817b0c977ed4767a9432748f12b09 +Author: Eric Anholt +Date: Fri Feb 19 12:21:47 2010 -0500 + + Remove swf_dumper. We have intel_mmio_read in gpu_tools to do this. + +commit 71c613c8475909e58fc491131bf9c10f4b047b16 +Author: Eric Anholt +Date: Fri Feb 19 12:20:33 2010 -0500 + + Remove bios_reader now that it's moved to gpu_tools. + +commit 7ada4eb3836f58a72f1c5b6b8139030fab9b7d63 +Author: Eric Anholt +Date: Fri Feb 19 12:18:23 2010 -0500 + + Remove intel_hotplug tool now that it won't work with KMS. + + We'd want to put something like it in sysfs or something if we wanted + this tool to exist again. + +commit 3284aacfe095f6260eee5ed126685d0638626a29 +Author: Eric Anholt +Date: Fri Feb 19 12:14:12 2010 -0500 + + Remove dead i830_bios.c. + + Things that used it are now either in the kernel or stashed off in + gpu_tools. + +commit 761d386a940081688b9b599c7a5b0270abfc5138 +Author: Eric Anholt +Date: Fri Feb 19 12:13:25 2010 -0500 + + Remove intel_gtt and intel_lid now that they're in gpu_tools. + +commit 6199af00cb47df6347ecd72ff7f6c86a564cec57 +Author: Eric Anholt +Date: Fri Feb 19 12:06:18 2010 -0500 + + Remove xprintf.c from the old "I can't believe it's not an X Server" tools. + +commit cba8e3136a100ba274f48c78df5b23fa8960fa16 +Author: Eric Anholt +Date: Fri Feb 19 12:04:51 2010 -0500 + + Remove intel_statuspage, now that we have /debug/dri/0/i915_gem_hws + +commit 40f5f72e30003993bfe298cd634d4f3f56148d4a +Author: Eric Anholt +Date: Fri Feb 19 12:01:30 2010 -0500 + + Remove dead main.c from reg_dumper/ + +commit 0c5e4a65f5d0f8d41c6bcb4c6978054f40064494 +Author: Eric Anholt +Date: Fri Feb 19 12:00:56 2010 -0500 + + Delete the audio dumping tool now that it lives in gpu_tools. + +commit 6bdab841766c8d9febaa23cb01a7bbc9edfae471 +Author: Eric Anholt +Date: Fri Feb 19 11:21:40 2010 -0500 + + uxa: Skip adjusting mask coordinates when no mask is present. + + Quiets clang warnings about garbage variable usage. + +commit a86869e6c3131b83a2ad529bc313270a9f45f5bd +Author: Eric Anholt +Date: Fri Feb 19 08:15:30 2010 -0800 + + Fix an unused variable warning for !INTEL_XVMC. + +commit ec5deb2bcbf828c3c47488eb77461c26cab38ed6 +Author: Eric Anholt +Date: Fri Feb 19 08:11:00 2010 -0800 + + Remove dead assignments noticed by clang. + +commit a4180eabfa00c256494ed09aa336a17605c49a8a +Author: Eric Anholt +Date: Fri Feb 19 08:10:17 2010 -0800 + + Remove stale junk in VideoRam setup, noticed by clang. + +commit 03657d4a698e0a25ab3863a15ad4c8b9d64dbb9a +Author: Eric Anholt +Date: Fri Feb 19 08:03:44 2010 -0800 + + Remove dead UMS CRTC resize code. + +commit 1c3aaad09d6ef207fba748ad4ef4575a26ab2e5c +Author: Chris Wilson +Date: Wed Feb 17 17:48:32 2010 +0000 + + dri2: Silence the compiler for an unused function with proto < 4 + + Move the unused function into the #if DRI2INFOREC_VERSION >= 4 block. + + Signed-off-by: Chris Wilson + +commit 00e7312dc45e54cd4547a943897a524639cb0b38 +Author: Jesse Barnes +Date: Thu Feb 11 09:46:12 2010 -0800 + + DRI2: handle full height blits without tearing in CopyRegion + + On 965 and up, if we detect a full height blit, we should just wait for + vblank, rather than try to do a scanline wait for the whole display. + + On pre-965, doing a scanline wait followed by a blit works, but in the + full height case we need to give the blitter time to start up, so we + wait until the bottom line of the blit minus 2 padding scanlines to + accommodate. + + Fixes FDO bug #22475. + + Signed-off-by: Jesse Barnes + +commit f0d760bfd71e2b2b40d2b250cd84b4626492ba47 +Author: Jesse Barnes +Date: Wed Feb 10 11:24:46 2010 -0800 + + Disable bo reuse on shadow framebuffer + + This keeps us from trying to set tiling on it while pinned, which also + keeps us from trying to unpin it in the kernel, causing an error. + + Signed-off-by: Jesse Barnes + +commit 41784e15d39c29af5a87fe8d0982bd1b0be3562d +Author: Gaetan Nadon +Date: Fri Jan 29 15:54:16 2010 -0500 + + config: remove dead LINUXDOC macro usage + + This module does not generate LINUXDOC documentation. + + Signed-off-by: Gaetan Nadon + +commit 6610bcbac51c9ac970128012f0d4566d8cfba000 +Author: Jesse Barnes +Date: Fri Feb 5 17:18:50 2010 -0800 + + DRI2: only use version 4 APIs if kernel support exists + + Check for page flipping support before enabling flip and vblank event + support needed for the new DRI2 APIs. + + Signed-off-by: Jesse Barnes + +commit 1a76fa5574e8e8f88ac3518a4e4494e1af301dc1 +Author: Keith Packard +Date: Fri Jan 29 23:28:46 2010 -0800 + + Initialize DRI2 info rec version 4 list of driver names + + With DRI2 supporting multiple subsystems, the video driver must + initialize the list of driver names instead of just passing the single + driver name used by Mesa. Without this, the X server will fail to + initialize DRI2 as the numDrivers field in this structure will be + uninitialized. + + Signed-off-by: Keith Packard + +commit 918151a7955c26174db80b775205f6ffb4f44ab6 +Author: Chris Wilson +Date: Wed Jan 27 20:33:08 2010 +0000 + + uxa: Fix compatible_formats() for OVER + + In separating the boolean logic out into a separate function, dc6522dd, + I reversed the sense of one particular test: + + src->format == dst->format + + The OVER optimisation is only valid if the src and dst formats match, + but not always. + + Signed-off-by: Chris Wilson + +commit 197cb08a2d54cabbfe97454d7db85cfe1f5f27ba +Author: Chris Wilson +Date: Mon Jan 25 15:15:04 2010 +0000 + + Extract pixel value for all formats to avoid hitting fallbacks. + + On failing to extract the pixel value for an alpha-only solid we + actually triggered a fallback. Since this path is commonly hitting + whilst fading in images, for example cairo_paint_with_alpha(), the + fallback was detected during the Moblin boot sequence where it was + adding a second to the overall boot time. + + See + fallback intel: Moblin startup is hitting a composite fallback, costing + a ton of performance + https://bugs.freedesktop.org/show_bug.cgi?id=26189 + + Based on the initial patch by Arjan van de Van. + + Signed-off-by: Chris Wilson + +commit 5f93d019dc6311dd16b6792ffb60dbfc45ef3d08 +Author: Chris Wilson +Date: Mon Jan 25 15:47:11 2010 +0000 + + uxa: Adjust uxa_get_color_for_pixmap to match prototype + + The prototype says this function returns a Bool and not just an int, so + be pedantic and return TRUE/FALSE. + + Signed-off-by: Chris Wilson + +commit dc6522dd491831f3843606e3ed57cc01fe2c804c +Author: Chris Wilson +Date: Sun Jan 24 09:37:23 2010 +0000 + + uxa: Protect against a potential NULL src->Drawable reference + + One of the convoluted if branches dereferenced Drawable when it is + potentially NULL. Avoid this by explicitly handling the NULL Drawable + cases earlier, and enabling solid fills for solid sources. + + Signed-off-by: Chris Wilson + +commit 31bbd7f919f4f1f545dd49861c15e60561c075cb +Author: Chris Wilson +Date: Sun Jan 24 09:04:16 2010 +0000 + + uxa/uxa-render: Always remove useless repeats during composite. + + I added a jump if there was no src or mask Drawable, but we do actually + need to check for useless src repeats even if we have a source-only + mask. + + Signed-off-by: Chris Wilson + +commit 326fe00df4160fbc3513ddbedfec90bdb2d7101b +Author: Chris Wilson +Date: Sun Jan 24 09:02:05 2010 +0000 + + uxa: Increase amount of composite fallback verbage + + The fallback log for http://bugs.freedesktop.org/show_bug.cgi?id=26189 + does not actually state the reason why we actually fallback. This is + possibly because we need to fallback for reasons other than the + operation cannot be performed in hardware -- such as using an alpha map + or the screen is swapped out, so add this information to the fallback + log. + + Signed-off-by: Chris Wilson + +commit 93cd943d41c646c794b8cb5a960d8f0805e15395 +Author: Eric Anholt +Date: Fri Jan 15 12:53:47 2010 -0800 + + intel: Use the compositing-aware colorkey filler instead of homebrew fail. + + Of course, it's still fail since you can't correctly composite + colorkey overlay, but at least this doesn't spam colorkey to the root + window. + + Tested-by: Daniel Vetter + +commit 6e61de896b42cffe1af6b0384cb69265d3d121a1 +Author: Alan Coopersmith +Date: Fri Jan 15 15:51:28 2010 -0800 + + Update Sun license notices to current X.Org standard form + + Signed-off-by: Alan Coopersmith + +commit 96f45c66eed2631eba98ae416c3afdf540fa5c34 +Author: Jesse Barnes +Date: Wed Jan 13 13:20:43 2010 -0500 + + DRI2: if the swap condition is satisfied, complete it immediately + + If we get to the point where we check the divisor/remainder equation and + it's satisfied, we should complete the swap immediately. + + Signed-off-by: Jesse Barnes + +commit 51c75906329a4727e37c8d1f64f257ea9602caa2 +Author: Jesse Barnes +Date: Fri May 1 14:52:26 2009 -0700 + + DRI2: support new DRI2 APIs + + The new interfaces allow for improved buffer swap, and support for the + SGI_swap_control, SGI_video_sync and OML_sync_control GLX extensions. + + The Intel implementation allows page flipping to occur for swaps that + are full screen and not rotated. + + Signed-off-by: Jesse Barnes + +commit 4902f546be19e3d5bb47f6c75e2199dc4856c0f4 +Author: Chris Wilson +Date: Sun Dec 13 10:44:12 2009 +0000 + + i965: Ensure that URB_FENCE is aligned to 64-bytes + + The PRM (Vol 1, p32) specifies that the URB_FENCE command must not cross + a cache-line boundary (64-bytes) in order to workaround a silicon issue. + Ensure that it does not by inserting an alignment point before the atomic + section. + + This is a slightly too large hammer, but the easiest method to work with + the current BEGIN_BATCH/ADVANCE_BATCH protections. + + Signed-off-by: Chris Wilson + +commit 83626aba357ffb4dd7931daaf163c1dd1d08f9d3 +Author: Chris Wilson +Date: Sun Nov 29 21:39:41 2009 +0000 + + uxa-glyphs: Enable TILING_X on glyph caches. + + Signed-off-by: Chris Wilson + +commit 50e07da8094c8c8c593b6eb8c41fc42444851d04 +Author: Chris Wilson +Date: Sun Dec 13 09:35:36 2009 +0000 + + i830: Do not use vtSema when chosing mapping type. + + The mapping type to use is determined by the tiling of the underlying + object, not by whether or not not we control the vt. This was a + left-over wart that was intended to mean that we had GEM and so could + use GTT mappings. + + Signed-off-by: Chris Wilson + +commit 7a2b7cfab5cdef277f0feb838683422d9fcb0db3 +Author: Chris Wilson +Date: Sun Dec 13 09:33:45 2009 +0000 + + Consolidate determining maximum sizes for use with GEM + + Add a small wrapper function so that the callsites need only call the + single function when checking the available aperture size for + determining the maximum viable size for operations. This will allow us + to easily extend this set in the future by only needing to adding the + check to a single location. + + Signed-off-by: Chris Wilson + +commit 229d23fb18d696fb7ad476ce335be14ec9811bd3 +Author: Daniel Vetter +Date: Tue Dec 1 14:32:34 2009 +0100 + + Xv: don't enable XVMC port on unsupported configs + + This just makes it _really_ clear, what's supported. No other changes. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit ce7ba18f577cc9aedddaff303dbc9662a276b4cf +Author: Daniel Vetter +Date: Tue Dec 1 14:32:33 2009 +0100 + + Xv: consolidate xmvc passthrough handling + + It's now all in I830PutImageTextured. Also kill some leftovers + from XVMC-on-overlay support and ums-XVMC-on-i915 support. Plus + a small comment as a reminder for where to add i915 xvmc support + back in. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 1ac7c94083a3266e2d5dd932709118436074dd00 +Author: Daniel Vetter +Date: Tue Dec 1 14:32:32 2009 +0100 + + Xv: hide ugly semantics in i830_clip_video_helper + + I'm still curious as to why fixed-point semantics are necessary + for this generic XV helper function that's been causing all this. + Can modern X really run on hw without floating-point support? + + Anyway, the ugliness is now all nicely under the carpet (in + i830_clip_video_helper). + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 31f13fa8a0d4cd28067de37d0d31d23e8200d0ff +Author: Daniel Vetter +Date: Tue Dec 1 14:32:31 2009 +0100 + + Xv: move users of x1, x2, y1, y2 to PutImage + + After this there are no other external users of these strange variables, + so we can nicely hide them somewhere in the next changeset. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit ce6526b9b4df304ccd83a0a02a95621300dbaed3 +Author: Daniel Vetter +Date: Tue Dec 1 14:32:30 2009 +0100 + + Xv: kill unnecessary parameters for hw PutImage functions + + This is the first part of my small crusade to rip out x1, x2, y1, y2 + from I830PutImage*. These variables have strange semantics (they + change from simple integers to fixed-point values somewhere in + the middle) and don't really seem to be what we actually need. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit cf74caaa91667457bba3583b216dfc157d09f39e +Author: Daniel Vetter +Date: Tue Dec 1 14:32:29 2009 +0100 + + Xv: kill an unnecessary if + + We always pass a non-null pointer for crtc_ret, no point to check + for this. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit d8353c737b5b8077f499461b1e6c78f09544d226 +Author: Daniel Vetter +Date: Tue Dec 1 14:32:28 2009 +0100 + + Xv: split up I830PutImage into textured and !textured case + + This wasn't making much sense anymore, and further cleanups will + make this even more apparent. This change just makes two copies of + I830PutImage and kills the not-applicable if-clauses in both + versions. + + There is one small functional change in here: The textured video + path doesn't munch around with adaptor_priv->videoStatus anymore, + which is only used by the overlay. This could prevent the overlay + from being switched off if someone would use textured video at the + same time. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 091035146463bf1aa6674bff6947d04fc620c18f +Author: Carl Worth +Date: Mon Jan 4 14:20:11 2010 -0800 + + configure.ac: Bump version to 2.10.0. + + In preparation for the 2.10.0 release. + +commit 01f7d0307b3f5f085e383ff85026757de9cda359 +Author: Carl Worth +Date: Mon Jan 4 14:19:17 2010 -0800 + + NEWS: Add final release notes for the 2.10.0 release. + + Mentioning that it's functionally identical to our most recent release + candidate. + +commit e966bca3a9143cff37beb54359bea13c9f693b44 +Author: Zhenyu Wang +Date: Tue Dec 29 21:49:49 2009 -0800 + + Take note for Pineview support in README and manpage + + Signed-off-by: Zhenyu Wang + +commit 6137791e9f1a4778afabbbc06de3da68648ae258 +Author: Carl Worth +Date: Mon Jan 4 14:08:24 2010 -0800 + + man page: Remove section describing BACKLIGHT_CONTROL property. + + This apparently no longer exists in a KMS world, so remove it from the + documentation. + +commit 7f36a439249cc2101d8985de5e95af652e5b984b +Author: Carl Worth +Date: Mon Jan 4 14:07:24 2010 -0800 + + man page: Rename PANEL_FITTING to "scaling mode". + + The old UMS name was PANEL_FITTING while the new KMS name is "scaling mode". + + Fixes bug #25606. + +commit a6fb71e6e26fb31f4cd10fad2d3a87d9114a649a +Author: Carl Worth +Date: Mon Jan 4 14:05:27 2010 -0800 + + man page: Add additional indentation for some output configuration options. + + The BACKLIGHT_CONTROL and PANEL_FITTING options appear in a list, and + then each contain a sub-list of sub-options. Use indentation to make + this structure more apparent to the reader. + +commit 25a6c8dfae240143309b14cc32ebac6008c3a378 +Author: Gaetan Nadon +Date: Tue Dec 15 21:46:48 2009 -0500 + + configure.ac: use backticks rather than $() for cmd subs + + Use "$PKG_CONFIG" rather than hard coded "pkg-config" + + Acked-by: Dan Nicholson + Acked-by: Daniel Stone + + Signed-off-by: Gaetan Nadon + +commit 2c142e421e859406b5aff16ba18624150269fc06 +Author: Carl Worth +Date: Thu Dec 10 15:25:44 2009 -0800 + + Update version to 2.9.99.902. + + For the second release-candidate snapshot in preparation for 2.10. + +commit 8ecf70ea553083cbc26928dc3973c8f6f8b3d9d0 +Author: Carl Worth +Date: Thu Dec 10 15:17:57 2009 -0800 + + NEWS: Add notes for 2.9.99.902 (and preliminary notes for 2.10) + + This comes from my cursory glance over the commit log from 2.9.1 + to master. + +commit 88b2209a7526a7c7f3b3a2d491d48bd0d5d56e04 +Author: Carl Worth +Date: Thu Dec 10 14:52:46 2009 -0800 + + Document the DebugFlushBatches, DebugFlushCaches, and DebugWait options. + + These were added in 3c0815abf28744e215bea286e71d935cd486955a . The + documentation added here comes straight from that commit message. + +commit 8d6faf7dc546bda64e11bf6dea7f3c997f07f887 +Author: Tobias Doerffel +Date: Wed Dec 9 09:57:20 2009 +0100 + + Fix compiler warning in i830_copy_video_data() if XvMC is disabled + + The variable "intel" is unused when building i830_video.c without XvMC + support which results in a compiler warning: + + i830_video.c: In function 'i830_copy_video_data': + i830_video.c:1443: warning: unused variable `intel' + + Trivial fix via #ifdef. + +commit bd81734465912d79d6320a6fb021ce43d258b906 +Author: Daniel Vetter +Date: Tue Dec 8 15:27:41 2009 +0100 + + Xv: enable drmmode overlay + + Now that libdrm 2.4.16 is released (and already required) we can + unconditionally enable this. + + Please add something like this to the release-notes/NEWS file: + + * Overlay support for kernel modesetting. This needs at least kernel + v2.6.33 to work. A backport to 2.6.32 is available at: + + http://gitorious.org/daniel-s-linux-stuff/linux-kernel/commits/intel-kms-overlay-for-2.6.32 + + Signed-off-by: Daniel Vetter + +commit 37f631d669c165c4fb56ccd7a6fc0a432f453b52 +Author: Chris Wilson +Date: Thu Dec 10 08:50:16 2009 +0000 + + Revert "uxa-glyphs: Enable TILING_X on glyph caches." + + This reverts commit 3f11bbec420080151406c203af292e55177e77d1. + + For unknown reasons, enabling tiling for the glyph cache is causing + glyph corruption both across suspend and resume and VT switching, on a + wide range of chipsets (reports include both i8xx and gm45) + + This strongly suggests that we are handling tiling, or updates to tiled + buffers, incorrectly across i915_gem_idle(). However, until we can find + the root cause, we want to fix this regression before the next stable + release, so simply revert this patch. :( + + Fixes: + [Bug 25406] fonts garbled after resuming from suspend since 6729b508 + http://bugs.freedesktop.org/show_bug.cgi?id=25406 + + Signed-off-by: Chris Wilson + +commit 093bb9ebe69760975a3fcf2322db950312e6c2d7 +Author: Chris Wilson +Date: Tue Dec 8 23:45:28 2009 +0000 + + i965: Only use the affine kernels if both src and mask are affine + + Signed-off-by: Chris Wilson + +commit 0cf04ea4d736f7d7848f33b772d88a0f1b6678b1 +Author: Chris Wilson +Date: Tue Dec 8 23:44:45 2009 +0000 + + i965: Set src_filter before testing. + + Signed-off-by: Chris Wilson + +commit 417ad2712edcbca635eb5eeff0d11cdb16c069ed +Author: Chris Wilson +Date: Tue Dec 8 23:43:57 2009 +0000 + + Assert that we only call OUT_BATCH() inside a BATCH + + Signed-off-by: Chris Wilson + +commit 47416b1eea09b238a997636d35998d71e0d18161 +Author: Chris Wilson +Date: Tue Dec 8 13:47:07 2009 +0000 + + i965: Maximum number of vertices per composite is 24, not 18 + + Beware the potential buffer overflow. + + Signed-off-by: Chris Wilson + +commit c1afc831c8fe4cbececee7dfa23506a6746c2425 +Author: Chris Wilson +Date: Mon Dec 7 21:27:56 2009 +0000 + + uxa: Cache solid fills. + + Maintain a small cache of pixmaps to hold SolidFill pictures. Currently + we create a pixmap the size of the damaged region and fill that using + pixman before downloading it to the GPU and compositing. Needless to say + this is extremely expensive compared to simply emitting the solid + colour. To mitigate this cost, we maintain a small cache of 1x1R + pictures which is recognised by the driver as being a solid, but at the + very least is maintained as a GPU ready pixmap. + + This gives a good boost to cairo-xcb (which uses solid fills) on a gm45: + + Before: + gnome-terminal-vim: 41.9s + After: + gnome-terminal-vim: 31.7s + + Compare with using a cache of 1x1R pixmaps in cairo-xcb: + gnome-terminal-vim: 31.6s + + Signed-off-by: Chris Wilson + +commit cd475bad23c02130d11c49882c11261c9f0d4ef1 +Author: Chris Wilson +Date: Mon Dec 7 11:09:14 2009 +0000 + + batch: Ensure we send a MI_FLUSH in the block handler for TFP + + This should restore the previous level of synchronisation between + textures and pixmaps, but *does not* guarantee that a texture will be + flushed before use. tfp should be fixed so that the ddx can submit the + batch if required to flush the pixmap. + + A side-effect of this patch is to rename intel_batch_flush() to + intel_batch_submit() to reduce the confusion of executing a batch buffer + with that of emitting a MI_FLUSH. + + Should fix the remaining rendering corruption involving tfp [inc compiz]: + + Bug 25431 [i915 bisected] piglit/texturing_tfp regressed + http://bugs.freedesktop.org/show_bug.cgi?id=25431 + + Bug 25481 Wrong cursor format and cursor blink rate with compiz enabled + http://bugs.freedesktop.org/show_bug.cgi?id=25481 + + Signed-off-by: Chris Wilson + +commit 415aab474edd1425034981306718afd8506445f1 +Author: Chris Wilson +Date: Fri Dec 4 09:02:36 2009 +0000 + + intel: And remember to flush the batch... + + In commit 98e11210 + + Remove flush parameter from intel_batch_flush() + + Maxi spotted that I had broken screen updating. It appears in my haste + to eliminate the extra parameter I removed a call to intel_batch_flush() + when throttling, i.e. when pushing the updates to the screen before + idling. + + Should fix: + + Bug 25409 [bisected] rendering corruption since a938673e + https://bugs.freedesktop.org/show_bug.cgi?id=25409 + + Signed-off-by: Chris Wilson + +commit 8438372dcc9d15c7b708332cfcb3a1c16a2c5cf2 +Author: Kristian Høgsberg +Date: Thu Dec 3 14:39:43 2009 -0500 + + Require libdrm 2.4.16 + + Needed for drmGetDeviceNameFromFd(). + +commit c439207ec0cc16d7d9f523598fcdebf7cec893e2 +Author: Jesse Barnes +Date: Wed Dec 2 14:43:17 2009 -0800 + + Update man page to reflect currently available options + + Many have been removed or are obsolete now that UMS is gone. And some + are only available on i810/i815 or i830+, so move them to the + appropriate section. + + Signed-off-by: Jesse Barnes + +commit a938673ee84d51ef655c37dfa7bbc5c35334cd28 +Author: Chris Wilson +Date: Wed Dec 2 20:51:53 2009 +0000 + + batch: Downgrade batch submission from a FatalError. + + If we wedge the GPU then we will return -EIO for the current batch and + then attempt to reset the GPU. Meanwhile the X server detects the error, + throws a FatalError and to all intents and purposes appears to crash to + the user - whereas before it often just appeared to momentarily freeze. + Of course, on older hardware the server remains frozen until we can find + a way to reset those GPUs at runtime. + + Signed-off-by: Chris Wilson + +commit 98e11210367c950e3f932419d2a4722cf971885d +Author: Chris Wilson +Date: Wed Dec 2 20:48:37 2009 +0000 + + Remove flush parameter from intel_batch_flush() + + There is only a single caller that wishes to forcibly append a flush + into the batch: intel_sync(). So move the logic there. + + Signed-off-by: Chris Wilson + +commit 57336c26f1fb90d43851ddcf78539585b67d86d9 +Author: Chris Wilson +Date: Wed Dec 2 20:42:41 2009 +0000 + + Rename I830Sync() to intel_sync() + + Signed-off-by: Chris Wilson + +commit 370157f4932cf9067ba81c8bd5a311aff610882b +Author: Chris Wilson +Date: Wed Dec 2 20:28:49 2009 +0000 + + batch: Avoid flushing a NULL batch + + During shutdown from a FatalError during batchbuffer submission, it is + possible for the batch_ptr to be NULL, so we must be careful not to + append a flush on this error path. + + Signed-off-by: Chris Wilson + +commit ad68881b670aabf8dbfd3b954e8796f91260579d +Author: Chris Wilson +Date: Wed Dec 2 14:14:39 2009 +0000 + + uxa_check_composite: Minor whitespace. + + Signed-off-by: Chris Wilson + +commit 49d2ccab2a82083110fe796636f3f91ba8c31237 +Author: Chris Wilson +Date: Wed Dec 2 14:13:43 2009 +0000 + + uxa_prepare_access() don't force a flush. + + Only the kernel knows whether the mapping requires a flush, so do not + preempt it. + + Signed-off-by: Chris Wilson + +commit b68d3646f1fdfe012c16741958c7a62136a9b5aa +Author: Chris Wilson +Date: Wed Dec 2 14:12:19 2009 +0000 + + Review use of errno after libdrm call + + Since drm may not actually set the appropriate errno after a failure, we + must use the return code instead when determining the cause of failure. + + Signed-off-by: Chris Wilson + +commit 0ff4d42a42b9e537b083343ee7dcc41cb41ae7cf +Author: Chris Wilson +Date: Wed Dec 2 12:12:07 2009 +0000 + + uxa: Review uxa_prepare_access() to remove potential nesting + + Around a call to uxa_put_image() it is possible to mix both accelerated + and fallback paths, with the fallback code making the presumed + optimisation of only trying to call uxa_prepare_access() once. This + fails if the accelerated path also uses prepare/finish access on the + same drawable and then later fallback to the fallback path. This can + happen currently if an error is reported whilst attempting to accelerate + PutImage. + + #0 memcpy () at ../sysdeps/x86_64/memcpy.S:162 + #1 0x00007ffff43ce4bd in fbBlt (srcLine=, srcStride=40, srcX=, dstLine=0xffffffffffffffff, dstStride=64, dstX=0, width=, height=8, alu=3, pm=4294967295, bpp=8, reverse=0, upsidedown=0) at fbblt.c:93 + #2 0x00007ffff43ce740 in fbBltStip (src=0xffffffffffffffff, srcStride=156555204, srcX=34, dst=0xfffffffc, dstStride=64, dstX=40, width=304, height=8, alu=3, pm=4294967295, bpp=8) at fbblt.c:944 + #3 0x00007ffff4c32c53 in uxa_do_put_image (pDrawable=0x246aa410, pGC=0x2c0a4f0, depth=8, x=0, y=0, w=38, h=8, leftPad=0, format=2, bits=0x954d7c4 "") at uxa-accel.c:196 #4 uxa_do_shm_put_image (pDrawable=0x246aa410, pGC=0x2c0a4f0, depth=8, x=0, y=0, w=38, h=8, leftPad=0, format=2, bits=0x954d7c4 "") at uxa-accel.c:223 + #5 uxa_put_image (pDrawable=0x246aa410, pGC=0x2c0a4f0, depth=8, x=0, y=0, w=38, h=8, leftPad=0, format=2, bits=0x954d7c4 "") at uxa-accel.c:289 + #6 0x00000000004d574f in damagePutImage (pDrawable=0x246aa410, pGC=0x2c0a4f0, depth=8, x=0, y=0, w=38, h=8, leftPad=0, format=2, pImage=0x954d7c4 "") at damage.c:905 + #7 0x00000000004287db in ProcPutImage (client=0x47ca72d0) at dispatch.c:2073 + #8 0x000000000042bd94 in Dispatch () at dispatch.c:445 + #9 0x000000000042513a in main (argc=4, argv=0x7fffffffe2a8, envp=) at main.c:285 + + Signed-off-by: Chris Wilson + +commit 6be26cae8379f973d9ca27e0d5371d16618e4f7b +Author: Chris Wilson +Date: Tue Dec 1 16:13:25 2009 +0000 + + i830: Simplify prepare_access / finish_access + + Reduce the 3 conditions into the 2 distinct cases. This has the + secondary benefit of also distinguishing between the reported errors. + + Signed-off-by: Chris Wilson + +commit 637f003b047e426901cab6b1fe3a0924bcb9a38a +Author: Chris Wilson +Date: Tue Dec 1 13:20:20 2009 +0000 + + uxa: Don't treat prepare_access as a flush synchronisation point. + + The kernel will only emit a flush iff the buffer is currently owned by + the GPU. Instead of presuming that the kernel must emit a flush, it is + safer to assume that it does not and so cannot mapping the buffer on to + the CPU as a synchronisation point. The most obvious counter-example is + when we map the same buffer twice without using it in a batch. + + Signed-off-by: Chris Wilson + +commit cd5a9568ce0a541f030c27cdae529fe18e5f0437 +Author: Carl Worth +Date: Mon Nov 30 20:17:04 2009 -0800 + + Add i830_bios.h and i830_display.h to EXTRA_DIST. + + These files have been dropped from the generated tar file since the + removal of UMS support. However, the bios_reader code still includes + these, so "make distcheck" fails unless these are distributed. + + There's probably a cleaner fix possible, but this at least fixes the + build so that the snapshot can be pushed out. + +commit 5bdac72a5c3f68ab6d9f7f2f1dfa6e5b78f04e57 +Author: Carl Worth +Date: Mon Nov 30 20:16:19 2009 -0800 + + NEWS: Note that the driver now has a hard dependency on KMS. + + Since the UMS code has all been removed. + +commit 813a910d7e4cc1c3deec0dcb1b536f8af337993a +Author: Carl Worth +Date: Mon Nov 30 19:48:05 2009 -0800 + + configure.ac: Bump version to 2.9.99.901. + + In preparation for a new snapshot. + +commit b62c72913a85895a60268a49eed1c136f63f160d +Author: Carl Worth +Date: Mon Nov 30 19:46:59 2009 -0800 + + NEWS: Add generic notes for the 2.9.99.901 snapshot. + + We plan to collect real release notes before the 2.10.0 release. + +commit 00aa4f7a45a318af5b651f9f3928e9da4443233a +Author: Chris Wilson +Date: Mon Nov 30 20:50:31 2009 +0000 + + uxa: Limit maximum size of tiled objects + + On older chipsets (i.e. pre-i965) tiling is very restrictive and imposes + severe size and alignment constraints. Combine that with relatively + small apertures and it is very easy to create a batch buffer that + cannot be mapped into the aperture (but would otherwise fit based purely + on total object size). To prevent this we need to not use tiling for large + buffers (the very same buffers where tiling would be of most benefit!). + + Signed-off-by: Chris Wilson + +commit 8dd1c9eca02fb8da0c51f6fa4a38eb5e5ff41855 +Author: Gaetan Nadon +Date: Sun Nov 22 17:13:02 2009 -0500 + + video-intel: remove i2c_vid.h from src/Makefile.am + + make dist failed due to missing i2c_vid.h + Commit b9b159c49854d8d9d2207946bb583537bb0d48d6 Remove UMS support. + The above commit did not remove this header file from the makefile. + + Signed-off-by: Gaetan Nadon + +commit 6729b508c44bfca0b0dbef238a8732adbed6d4c9 +Author: Chris Wilson +Date: Mon Nov 30 16:52:10 2009 +0000 + + uxa: Initialise lists for private pixmap structure. + + When updating a buffer object for the framebuffer, we may need to + allocate a fresh pixmap private structure, for example if the pixmap is + replaced due to resize. When doing so it is then imperative to + initialise the circularly linked lists correctly. + + Should fix the fault: + #0 i830_set_pixmap_bo (pixmap=0x24ab380, bo=0x24ab780) at i830_uxa.c:524 + #1 0x00007f8615c629fd in drmmode_xf86crtc_resize (scrn=0x247a320, width=1280, height=800) at drmmode_display.c:1345 + #2 0x000000000051246c in xf86RandR12ScreenSetSize (pScreen=0x24824f0, width=, height=, mmWidth=, mmHeight=) at xf86RandR12.c:709 + #3 0x0000000000512aa8 in xf86RandR12CreateScreenResources (pScreen=) at xf86RandR12.c:839 + #4 0x0000000000514ec0 in xf86CrtcCreateScreenResources (screen=0x24824f0) at xf86Crtc.c:727 + #5 0x0000000000424fb3 in main (argc=, argv=, envp=) at main.c:215 + as reported by 'buscher'. + + Signed-off-by: Chris Wilson + +commit 85fe41126e83b35954dc2066eb103e0555e207a4 +Author: Chris Wilson +Date: Mon Nov 30 15:57:42 2009 +0000 + + uxa: Remove cache flush for copy + + As the copy uses the 2D blitter, it uses the render cache so the source + should not require flushing if it has previously been used as a + destination. + + Signed-off-by: Chris Wilson + +commit 2d434eed09936328a52cb942450a95aedc3eac63 +Author: Kristian Høgsberg +Date: Mon Nov 30 10:27:42 2009 -0500 + + Use new drmGetDeviceNameFromFd() for mapping to drm device name + + Should have been in libdrm to begin with. + +commit cfcabc45140d19bfbfa4737c0a11cdbb042d11eb +Author: Chris Wilson +Date: Mon Nov 30 13:58:30 2009 +0000 + + i915: Disable centre-point sampling. + + I still have no idea how this is triggering failures, but it is. So + revert until the problem is solved. + + Should fix once again: + + Bug 23803 [bisected i915] gnome characters disappear + http://bugs.freedesktop.org/show_bug.cgi?id=23803 + + Signed-off-by: Chris Wilson + +commit 8f8b6bd03d275379918777eaf7f63c0157b7ed9d +Author: Chris Wilson +Date: Mon Nov 30 14:03:40 2009 +0000 + + i915: Whitespace + + Signed-off-by: Chris Wilson + +commit 47916ea9d351f0ce6dc34713d6c164b0032f9830 +Author: Chris Wilson +Date: Mon Nov 30 13:58:06 2009 +0000 + + debug: Enable dumping of batchbuffer [compile-time only] + + Signed-off-by: Chris Wilson + +commit b118a52cd1a006321571967bd5f6c2a9e674de3a +Author: Chris Wilson +Date: Mon Nov 30 11:03:32 2009 +0000 + + i915: Remove routing of alpha channel to green. + + This modification is redundant since the routing is done in the blend + unit anyway. + + Signed-off-by: Chris Wilson + +commit 5e04ded2bce4c135b57d391f5f4e24e030103e61 +Author: Chris Wilson +Date: Mon Nov 30 10:57:04 2009 +0000 + + i915: Fix missing texture offset for mask. + + In commit e581ceb, I modified the shader generation to accommodate mixed + textures and solids but missed applying the new computed sampler for the + mask. + + References: + + Bug 23803 [bisected i915] gnome characters disappear + http://bugs.freedesktop.org/show_bug.cgi?id=23803 + + Bug 25031 rendering and color corruption since 14109abf + http://bugs.freedesktop.org/show_bug.cgi?id=25031 + + Bug 25047 [945GM bisected] rendercheck/repeat/triangles regressed + http://bugs.freedesktop.org/show_bug.cgi?id=25047 + + Signed-off-by: Chris Wilson + +commit a8ea20100de5be45699e71eb6ba67bef546ad0cd +Author: Chris Wilson +Date: Mon Nov 30 10:13:18 2009 +0000 + + debug: Don't always flush the batch when emitting a debugging flush + + I incorrectly changed the logic in 285f286 and caused the batch to + always be flushed when debugging, instead of merely inserting a MI_FLUSH + between operations. + + Signed-off-by: Chris Wilson + +commit c10850c63f9f88fbf08135bc4dcef1e5a2c71ee6 +Author: Chris Wilson +Date: Mon Nov 30 09:07:57 2009 +0000 + + overlay: Fix build after 646b4a9483 + + The compile cleanup was not without fault... Apparently I don't have + XVMC enabled anymore and so missed that this variable is actually used. + + Signed-off-by: Chris Wilson + +commit 3f11bbec420080151406c203af292e55177e77d1 +Author: Chris Wilson +Date: Sun Nov 29 21:39:41 2009 +0000 + + uxa-glyphs: Enable TILING_X on glyph caches. + + Signed-off-by: Chris Wilson + +commit 19d8c0cf50e98909c533ebfce3a0dd3f72b755c1 +Author: Chris Wilson +Date: Sun Nov 29 21:16:49 2009 +0000 + + uxa: PutImage acceleration + + Avoid waiting on dirty buffer object by streaming the upload to a fresh, + non-GPU hot buffer and blitting to the destination. + + This should help to redress the regression reported in bug 18075: + + [UXA] XPutImage performance regression + https://bugs.freedesktop.org/show_bug.cgi?id=18075 + + Using the particular synthetic benchmark in question on a g45: + + Before: + 9542.910448 Ops/s; put composition (!); 15x15 + 5623.271889 Ops/s; put composition (!); 75x75 + 1685.520362 Ops/s; put composition (!); 250x250 + + After: + 40173.865300 Ops/s; put composition (!); 15x15 + 28670.280612 Ops/s; put composition (!); 75x75 + 4794.368601 Ops/s; put composition (!); 250x250 + + which while not stellar performance is at least an improvement. As + anticipated this has little impact on the non-fallback RENDER paths, for + instance the current cairo-xlib backend is unaffected by this change. + + Signed-off-by: Chris Wilson + +commit f7540f06090753cba1190aa9e8cdea05a9512077 +Author: Chris Wilson +Date: Sun Nov 29 21:12:07 2009 +0000 + + Only flush batch during prepare access if it may modify the pixmap. + + As we track when a pixmap is active inside a batch buffer, we can avoid + unnecessary flushes of the batch when mapping a pixmap back to the CPU. + + Signed-off-by: Chris Wilson + +commit 9a2c18fb92659d57741bfdcacbe4f69aab361532 +Author: Chris Wilson +Date: Sun Nov 29 21:07:45 2009 +0000 + + batch: Emit a 'pipelined' flush when using a dirty source. + + Ensure that the render caches and texture caches are appropriately + flushed when switching a pixmap from a target to a source. + + This should fix bug 24315, + [855GM] Rendering corruption in text (usually) + https://bugs.freedesktop.org/show_bug.cgi?id=24315 + + Signed-off-by: Chris Wilson + +commit 285f286597df5af13ac3f3d366f2fc9d0468dafa +Author: Chris Wilson +Date: Sun Nov 29 22:42:03 2009 +0000 + + batch: Track pixmap domains. + + In order to detect when we require cache flushes we need to track which + domains the pixmap currently belongs to. So to do so we create a device + private structure to hold the extra information and hook it up. + + Signed-off-by: Chris Wilson + +commit 2c3aee2b570dadd9270a08d8ff675d07ac405e33 +Author: Chris Wilson +Date: Sun Nov 29 20:53:35 2009 +0000 + + uxa-glyphs: Stream uploads via temporary bo + + Avoid mapping the glyph cache back to the cpu by allocating temporary + buffer objects to store the glyph pixmap and blit to the cache. + + Signed-off-by: Chris Wilson + +commit 646b4a9483c01509a7324cc05eaadb72bc940c6d +Author: Chris Wilson +Date: Sun Nov 29 10:53:36 2009 +0000 + + Cleanup a few compiler warnings. + + Simple warnings for unused variables and C99-style declarations. + + Signed-off-by: Chris Wilson + +commit 917f9bb2435ba36bb99ef4d4f7b380d7f265e862 +Author: Gaetan Nadon +Date: Mon Nov 23 09:25:05 2009 -0500 + + Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES + + Now that the INSTALL file is generated. + Allows running make maintainer-clean. + +commit eda2bb26783f7e9ef1ae659265930308378206e1 +Author: Daniel Kahn Gillmor +Date: Fri Nov 20 01:52:05 2009 +0100 + + Makefile.am: Add missing .g4i to be included in the tar file. + + Apparently Debian packages were having to manually add these files + back in. Distribute them in the first place like we meant to. + +commit c5e86453c3ae3709933779a9dd609bbaebe21e8e +Author: Gaetan Nadon +Date: Wed Oct 28 14:41:41 2009 -0400 + + INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206 + + Automake 'foreign' option is specified in configure.ac. + Remove from Makefile.am + +commit 12c4a22dd0b4de92a9c3d9e0baab029292f118f0 +Author: Gaetan Nadon +Date: Wed Oct 28 14:09:09 2009 -0400 + + INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206 + + Add missing INSTALL file. Use standard GNU file on building tarball + README may have been updated + Remove AUTHORS file as it is empty and no content available yet. + Remove NEWS file as it is empty and no content available yet. + +commit ad4030932490f848c8ac21ba5a7a8d734994ed15 +Author: Gaetan Nadon +Date: Mon Oct 26 12:54:21 2009 -0400 + + Several driver modules do not have a ChangeLog target in Makefile.am #23814 + + The git generated ChangeLog replaces the hand written one. + Update configure.ac to xorg-macros level 1.3. + Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros + Update Makefile.am to add ChangeLog target if missing + Remove ChangeLog from EXTRA_DIST or *CLEAN variables + This is a pre-req for the INSTALL_CMD + +commit bb994ce018ae6c3e3c5548ae7439cfc5e9aa4554 +Author: Gaetan Nadon +Date: Thu Oct 22 13:02:04 2009 -0400 + + .gitignore: use common defaults with custom section # 24239 + + Using common defaults will reduce errors and maintenance. + Only the very small or inexistent custom section need periodic maintenance + when the structure of the component changes. Do not edit defaults. + +commit 67bbda0bddae3e0d39bc8deb7378f467aedfd0e3 +Author: Gaetan Nadon +Date: Thu Oct 22 12:34:17 2009 -0400 + + .gitignore: use common defaults with custom section # 24239 + + Using common defaults will reduce errors and maintenance. + Only the very small or inexistent custom section need periodic maintenance + when the structure of the component changes. Do not edit defaults. + +commit c180baf43b8a0e407448018f3a7e42491cf974ae +Author: Chris Wilson +Date: Fri Nov 13 19:35:23 2009 +0000 + + i915: Derive the correct target color from the pixmap by checking its format + + Particularly noting to route alpha to the green channel when blending + with a8 destinations. + + Fixes: + + rendercheck/repeat/triangles regressed + http://bugs.freedesktop.org/show_bug.cgi?id=25047 + + introduced with commit 14109a. + + Signed-off-by: Chris Wilson + +commit e9064eacb0ad8867e320597453facbb3c376522c +Author: Chris Wilson +Date: Fri Nov 13 18:35:44 2009 +0000 + + uxa: Do not remove repeat from solids for 1x1 composites. + + Or else we hit the buggy 1x1 source path and trigger: + + rendercheck/mcoords regressed + http://bugs.freedesktop.org/show_bug.cgi?id=25046 + + caused by the recent commit e581ceb. + +commit 14109abf285866ad4cd99d0cd16b0954a0a73a62 +Author: Chris Wilson +Date: Tue Nov 10 11:17:23 2009 +0000 + + i915: Fix texture sampling coordinates. + + RENDER specifies that texels should sampled from the pixel centre. This + corrects a number of failures in the cairo test suite and a few + off-by-one bug reports. + + Grey border around images + https://bugs.freedesktop.org/show_bug.cgi?id=21523 + + Note that the earlier attempt to fix this was subverted by the buggy use + of 1x1R textures for solid sources -- which caused the majority of text + to disappear. + + Signed-off-by: Chris Wilson + +commit e581ceb7381e29ecc1a172597d258824f6a1d2d3 +Author: Chris Wilson +Date: Tue Nov 10 11:14:23 2009 +0000 + + i915: Use the color channels to pass along solid sources and masks. + + Instead of allocating and utilising the texture samplers for 1x1R + solid sources and masks we can simply use the default diffuse and + specular colour channels and adjust the fragment shader appropriately. + The big advantage is the reduction in size of batches which should give + a good boost to glyph performance, irrespective of the additional boost + from using simpler shaders. + + However, the motivating factor behind the switch is that our use of 1x1 + textures turns out to be buggy... + + Signed-off-by: Chris Wilson + +commit 33cabbfca6acb5149e26f87a538a7cb79f00cad2 +Author: Chris Wilson +Date: Tue Nov 10 11:09:52 2009 +0000 + + i915: Check for overflow before overflowing. + + As the immediate victim of the overflow would be to overwrite the maximum + permissible value, the test was optimistic. + + Signed-off-by: Chris Wilson + +commit 67af5a99253b1295f8dc09b28863eb7dc8b59e1d +Author: Chris Wilson +Date: Tue Nov 10 11:05:20 2009 +0000 + + Check that batch buffers are atomic. + + Since batch buffers are rarely emitted by themselves but as part of a + sequence of state and vertices, the whole sequence is emitted atomically. + + Here we just enforce that batches are marked as being part of an atomic + sequence as appropriate. + + Signed-off-by: Chris Wilson + +commit 998d6b3d8c549086fbc8a9f0e309694b23398d8d +Author: Chris Wilson +Date: Tue Nov 10 11:00:43 2009 +0000 + + uxa: Force alpha bits to fill remaining bits + + In the case of x8r8g8b8 and similar where the alpha channel is ignored, + but should be interpreted as being 1, then it is convenient if those bits + are set appropriately in the colour. In order to do so for these formats, + where PIXMAN_FORMAT_A() returns 0 we need to compute the alpha channel + width as the remaining bits instead. + + Signed-off-by: Chris Wilson + +commit dbb68168dc909ab2ec1d935322c3fd8581e666f1 +Author: Eric Anholt +Date: Thu Nov 5 15:40:20 2009 -0800 + + Revert "configure: make --disable-dri work even if the server supports DRI" + + This reverts commit a851139c2141f6da370186148f2836e18b2acf83. + It broke the build, and I don't see why we should be supporting this + anyway. + + Conflicts: + + configure.ac + src/Makefile.am + +commit 4c8e783d84d2c14c8a1638b6a12307c0164d3e31 +Author: Eric Anholt +Date: Wed Oct 21 13:30:38 2009 -0700 + + Fix "Remove flow-control macros for fallbacks in the 2D driver." + + I guess this is the sort of failure due to rebase-happiness that makes + Linus yell at us for rebasing. + +commit d0e08fe611681fcc840d1b9ee8d49acdf50f7e58 +Author: Daniel Vetter +Date: Mon Oct 26 13:15:24 2009 +0000 + + Kill some more #defines only needed for User-Modesetting + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 8ff2a6496413e6b12fad9352f4bd9b6736bda56c +Author: Eric Anholt +Date: Wed Oct 21 13:30:38 2009 -0700 + + Remove flow-control macros for fallbacks in the 2D driver. + + It's poor style, and has confused new developers. + +commit c87585229b36790f883b9b8954ed061e00624df6 +Author: Jesse Barnes +Date: Thu Nov 5 13:33:55 2009 -0800 + + Increase stride limit for IGDNG + + It can go up to 32k. Upping this lets me use my 2560x1600 and 1920x1200 + monitors in an extended desktop configuration. + + Signed-off-by: Jesse Barnes + +commit cbcfb711747e3637f20145aed00ac3d6256d0d1d +Author: Rémi Cardona +Date: Wed Oct 28 13:12:46 2009 +0100 + + configure: drop some more cruft + + DEBUGFLAGS wasn't used anywhere and the configure switch is useless. + "CFLAGS=-g ./configure" does the same thing and actually works. + + PKG_CHECK_MODULES already calls AC_SUBST, no need to do it twice. + + Signed-off-by: Rémi Cardona + Acked-by: Chris Wilson + +commit 3c0a43b24cc7540cc139beca0ec2e4c202ff5593 +Author: Rémi Cardona +Date: Wed Oct 28 13:01:32 2009 +0100 + + configure: use CWARNFLAGS from xorg-macros.m4 + + Signed-off-by: Rémi Cardona + Acked-by: Chris Wilson + +commit a851139c2141f6da370186148f2836e18b2acf83 +Author: Rémi Cardona +Date: Wed Oct 28 12:37:38 2009 +0100 + + configure: make --disable-dri work even if the server supports DRI + + XF86DRI is defined by the SDK so not defining it here just breaks the + build. Define HAVE_DRI instead to avoid collisions. + + Note: DRI2 is still enabled/disabled entirely by SDK defines. + + Signed-off-by: Rémi Cardona + Acked-by: Chris Wilson + +commit 07e0b2cff6107d6c86096c7da4e31b0c976794d5 +Author: Rémi Cardona +Date: Wed Oct 28 11:45:55 2009 +0100 + + configure: group system header checks at the top + + Signed-off-by: Rémi Cardona + Acked-by: Chris Wilson + +commit 0401a4c3143c5b94875cb4c66c94a0d247c32da5 +Author: Rémi Cardona +Date: Wed Oct 28 11:42:41 2009 +0100 + + configure: check for libdrm and libpciaccess earlier + + Signed-off-by: Rémi Cardona + Acked-by: Chris Wilson + +commit 10946118dd3a63f1375a1bfde0b2f0542a93c1c2 +Author: Albert Damen +Date: Sun Oct 25 18:02:07 2009 +0100 + + Fix crash in uxa_acquire_pattern when pDst is NULL + + This avoids a crash when an XRenderComposite call is made with a + -1 value for width/height, (which apparently compiz's gtk-window- + decorator likes to do). Fixes bug: + + X crashes in uxa_acquire_pattern when logging in (gdm) + http://bugs.freedesktop.org/show_bug.cgi?id=24724 + + Signed-off-by: Albert Damen + Reviewed-by: Carl Worth + +commit 751e0a3e4576bbf4bffa56bbd6d4de28f10db98e +Author: Thomas Arnhold +Date: Mon Oct 19 11:35:30 2009 -0700 + + Fix 64-bit compiler warnings in intel_xvmc_dump_render(). + + Bug #24396. + +commit 3e8f2eae3a586aa29be4858698e666e0ec778cea +Author: Eric Anholt +Date: Thu Oct 15 13:48:56 2009 -0700 + + XVMC: Use XCB DRI2 instead of cargo-culting our own copy of Xlib stuff. (v2) + + v2: Incorporate comments from Jamey on device name handling and extension + detection. + +commit 38ab403d7a1c461c8ac65a056bee2dd5c7f2f58e +Author: Eric Anholt +Date: Thu Oct 15 11:39:32 2009 -0700 + + Enable XVMC by default on gen4. + +commit f171069608bf174d920921fa102b8619794ed272 +Author: Zhenyu Wang +Date: Mon Sep 28 18:35:57 2009 +0800 + + i965 XvMC cleanup + + Remove bo pin for surface buffer access, and remove access + attempt for possible unmapped framebuffer. Using xv buffer + pointer to pass current xvmc surface bo handler, which is + assigned to src image bo and handle that the same way as in Xv. + + Signed-off-by: Zhenyu Wang + [anholt: Fixed up for conflict against the XV rework. Not tested, because + both mplayer and xine segfault with XVMC currently.] + Signed-off-by: Eric Anholt + +commit aaedeffe00d9414bb03723dbc30b4938a07ce5fa +Author: Daniel Vetter +Date: Wed Oct 14 18:09:08 2009 +0200 + + Xv overlay: fix planar YUV copy for right rotated crtcs + + While copying and rotating the buffer, array access was out of bounds when + rotated to the right (RR_Rotate_270). My buffer handling changes probably + made this bug much more likely to actually result in a SIGSEGV. + + I've checked the logs and the bug exists since rotation has been supported, + i.e. this looks like a candidate for cherry-picking for all supported + releases. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 703e3326bb41528cc57c0d25003707df209fc714 +Author: Daniel Vetter +Date: Wed Oct 14 15:56:55 2009 +0200 + + Xv overlay: further cleanups + + Kill some unnecessary stuff. Small code changes, but no functional ones. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 1c2aedfce9e6a7561347e873d125b6889dee7941 +Author: Daniel Vetter +Date: Wed Oct 14 15:56:54 2009 +0200 + + Xv: fixup the disabled drmmode overlay code + + This code didn't survive the global renaming of vars to saner names. + Fix it up. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 909990f40a437cbd7026a10e32af1ea120f4c2a7 +Author: Daniel Vetter +Date: Wed Oct 14 15:56:53 2009 +0200 + + Xv overlay: remove some more dead stuff from ums overlay support + + Mostly unused definitions and variables, but also some strange ums + debug code. Also kill some now obsolete comments. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 86bc23ab5da34137c82250395c68aa92ecd88a24 +Author: Chris Wilson +Date: Wed Oct 14 12:04:40 2009 +0100 + + debug: Enable cache flushing after every operation + + If DEBUG_FLUSH_CACHES is enabled then emit a MI_FLUSH after every + rendering operation. This is intended to 'fix' cases where we are + missing a required flush in the middle of a sequence of operations, such + as switching between 2D to 3D and render to sampler. + + Signed-off-by: Chris Wilson + +commit 3c0815abf28744e215bea286e71d935cd486955a +Author: Chris Wilson +Date: Wed Oct 14 11:29:21 2009 +0100 + + conf: Add debugging flush options + + Make the following options available via xorg.conf: + Section "Driver" + Option "DebugFlushBatches" "1" # Flush the batch buffer after every + # single operation; + + Option "DebugFlushCaches" "1" # Include a MI_FLUSH at the end of every + # batch buffer to force data to be + # flushed out of cache and into memory + # before the completion of the batch. + + Option "DebugWait" "1" # Wait for the completion of every batch buffer + # before continuing, i.e. perform synchronous + # rendering. + EndSection + + Signed-off-by: Chris Wilson + +commit 2f134b84445d2d0bfe3d81276bc7f6648df062ee +Author: Zhao Yakui +Date: Wed Sep 30 07:31:57 2009 +0000 + + Return failure when the enum-type output property values are not found + + Failure to do so causes xrandr to report incorrect property values. + + Signed-off-by: Zhao Yakui + Signed-off-by: Eric Anholt + +commit fcc2ee48b866b81c79315ff10189b56fc201539d +Author: Albert Damen +Date: Wed Oct 7 21:55:42 2009 +0200 + + Drop frontbuffer from crtc in I830CloseScreen + + By dropping the frontbuffer from the crtc, the new frontbuffer + can be properly added to the crtc when the xserver is reset. + + Signed-off-by: Albert Damen + +commit 8a77877f9c2c6a8a1308bc1a3be9e7ad88bc7f49 +Author: Dave Airlie +Date: Fri Oct 9 14:16:06 2009 +1000 + + drmmode: with 1.7 server, set mode major doesn't get gamma setup. + + Noticed this on Fedora, where 1.7 server does gamma via the randr + codepaths however kms doesn't have this call which happens in the + non set_mode_major path. + + probably should be backported to released drivers. + + Signed-off-by: Dave Airlie + +commit d8c7678ddadce89ca7fc0edd1b4d9ed3d959e687 +Author: Jesse Barnes +Date: Mon Oct 12 14:02:12 2009 -0700 + + DRI2 compat build fix: it's drawable->pScreen not drawable->screen + + Fallout from the conversion; DRI2 compat path was broken. + + Signed-off-by: Jesse Barnes + +commit b37ac9d317ae537d993922976f87072040b04d04 +Author: Chris Wilson +Date: Mon Oct 12 14:31:06 2009 +0100 + + uxa: Refactor create Picture for pixman format + + Pull the common methods for creating a Picture given a pixman format + into its own method, and tidy the surrounding code. The benefit is that + we can now composite directly to the Picture and so save an intermediate + copy when creating patterns for gradients. + + Signed-off-by: Chris Wilson + +commit 7e8f32d0a7279dce1976f87612833d9092554cfe +Author: Chris Wilson +Date: Mon Oct 12 14:33:08 2009 +0100 + + uxa: Free the ScratchPixmapHeader after its associated Picture + + Fixes: http://bugs.freedesktop.org/show_bug.cgi?id=24459 + Intel Driver > 2.8: Cairo rendering bug, triggered in QtCurve GTK engine + + Signed-off-by: Chris Wilson + +commit 1556c62e0336ea2fef866722ee44d2d188e318f3 +Author: Eric Anholt +Date: Thu Oct 8 17:34:13 2009 -0700 + + Replace dolt and shave with relying on current autotools. + +commit 8b2d2ff0d026eea445a071102a62d782f3bbec78 +Author: Eric Anholt +Date: Wed Oct 7 16:12:25 2009 -0700 + + Clean up more i830_memory.c madness. + + It was cooking up insane alignment values for buffers that new libdrm was + justifiably complaining about, but it turns out we don't need the alignment + values anywhere because the only case they're needed, they're computed + entirely by the kernel. Also, the XVMC code was passing a completely unused + flag in. + +commit d525a0e993a59e118ab1e8519b3d73465f8f0169 +Author: Eric Anholt +Date: Tue Oct 6 19:05:24 2009 -0700 + + Rename pScreen to screen. + +commit b6262dcd2754f7e87f27979dcad145133ee3b945 +Author: Eric Anholt +Date: Tue Oct 6 19:00:41 2009 -0700 + + Rename pGC to gc. + +commit fdcfeb822d15cbfe6fccceab002b75458dca3264 +Author: Eric Anholt +Date: Tue Oct 6 18:57:22 2009 -0700 + + Rename pDraw to plain old drawable. + +commit 7bbf4ac7137ed0e4ec0a75806a396c12f102e779 +Author: Eric Anholt +Date: Tue Oct 6 18:50:54 2009 -0700 + + Rename the xv pPriv to adaptor_priv to reflect whose private it is. + +commit f309d475241260cf60567100511d5f7c6c487a29 +Author: Eric Anholt +Date: Tue Oct 6 18:38:53 2009 -0700 + + Call pPixmaps plain old pixmaps. + +commit da0f6616ad63f1581cf91a98104e5287aa44e7ce +Author: Eric Anholt +Date: Tue Oct 6 18:37:05 2009 -0700 + + de-pCamelHungarian the Render pictures and pixmaps. + +commit 050a141b7bc94b459061615124b7686a9c331e01 +Author: Eric Anholt +Date: Tue Oct 6 18:30:57 2009 -0700 + + Share several render fields between render implementations. + + Also, start settling on the cairo naming for things: source, mask, and dest. + +commit af27a3a0a5645c6f41f583611bd0f2559dc7cb2f +Author: Eric Anholt +Date: Tue Oct 6 18:24:50 2009 -0700 + + Rename the xf86 screen private from pScrn to scrn. + +commit cc5d3ba3c331c3b1becf2d19277b24144bf34cfa +Author: Eric Anholt +Date: Tue Oct 6 18:02:38 2009 -0700 + + Rename the screen private from I830Ptr pI830 to intel_screen_private *intel. + + This is the beginning of the campaign to remove some of the absurd use of + Hungarian in the driver. Not that I don't like Hungarian, but I don't need + to know that pI830 is a pPointer. + +commit 03e8e64f8669263e3cecb79ea57d5a26c0eaee3f +Author: Chris Wilson +Date: Wed Oct 7 22:15:37 2009 +0100 + + Complete the removal of UMS build support + + Eric missed removing the now dead references to the deleted subdirectories + in configure.ac with commit b9b159c + + Signed-off-by: Chris Wilson + +commit 5e44a0fa4209523bee56f513a2029869f96a710a +Author: Eric Anholt +Date: Tue Oct 6 18:08:51 2009 -0700 + + Remove more dead UMS code. + +commit 6a716a25abc84f1c7f766fd3bfa1c2aac91e6ae7 +Author: Eric Anholt +Date: Tue Oct 6 17:58:32 2009 -0700 + + Remove the reg_dumper code, now that it's been moved to intel_gpu_tools. + +commit e9aff787a55d684e3b9c6d5ea8ac2926be952280 +Author: Eric Anholt +Date: Tue Oct 6 17:53:59 2009 -0700 + + Remove the stepping debug app, replaced by version in intel_gpu_tools. + +commit 71b9cdaa86bb9d3deb44f32f47771c33898253c2 +Author: Eric Anholt +Date: Tue Oct 6 17:53:21 2009 -0700 + + Trim down the hotplug debug app. + +commit e95eb483e210def0814bc61fc36d672145da7dff +Author: Eric Anholt +Date: Tue Oct 6 17:51:09 2009 -0700 + + Remove intel_idle, replaced by intel_gpu_top in intel_gpu_tools. + +commit 8ae0e44e42db645abe6d385f561260d2ae4a1960 +Author: Eric Anholt +Date: Tue Oct 6 16:30:08 2009 -0700 + + Move to kernel coding style. + + We've talked about doing this since the start of the project, putting it off + until "some convenient time". Just after removing a third of the driver seems + like a convenient time, when backporting's probably not happening much anyway. + +commit b9b159c49854d8d9d2207946bb583537bb0d48d6 +Author: Eric Anholt +Date: Wed Sep 30 16:29:53 2009 -0700 + + Remove UMS support. + + At this point, the only remaining feature regressions should be the lack of + overlay support (about to land), and the need to update the XVMC code to work + in the presence of KMS. + + Acked-by: Keith Packard (in principle) + Acked-by: Carl Worth (in principle) + +commit d26f4c493721dbb2e2cbf4efcf8d37228d1b1f3b +Author: Eric Anholt +Date: Mon Oct 5 13:31:31 2009 -0700 + + Remove UMS overlay support. + + The replacement code is now landed, and the rest of UMS is about to disappear. + +commit 33c488e83676d26e69145ea615f75ca52768f400 +Author: Eric Anholt +Date: Mon Oct 5 10:38:05 2009 -0700 + + Remove error state dumping code. + + This is replaced by intel_gpu_dump, and would no longer be used once UMS is + gone. + +commit 2370af32fe31bed8e5715639023635bdb3b83b1b +Author: Daniel Vetter +Date: Tue Aug 11 16:06:47 2009 +0200 + + Implement drmmode overlay + + This does not restore the overlay on EnterVT/disable it on LeaveVT. + Does not look like this is necessary. + + Signed-off-by: Daniel Vetter + [anholt: Hacked in avoiding the actual kernel calls with + Signed-off-by: Eric Anholt + +commit 99230864050ea2f26c2412c4c87c50947fc3cbe1 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:46 2009 +0200 + + Xv: introduce an overlay hal + + This is the last preparatory step for overlay support with drmmode. + Safe two (specially marked) function calls in the setup code, all + hw accessing code goes now through these three new functions with + the ums_overlay prefix. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit bb04e184fdc55325a362ebf291e16a7c112a5f1d +Author: Daniel Vetter +Date: Tue Aug 11 16:06:45 2009 +0200 + + Xv: rework overlay buffer management + + The basic idea is to only pin the buffer into the gtt when + the overlay hw is actually using it. This results in a few changes: + + - Unify data copied/buffer handling with textured video. Now offsets + are always buffer relative and we just use drm_bo_map to access a + buffer. + - Implement double buffering using two bo's. This is necessary because + we can't pin the same buffer to the gtt and map it as normal memory. + - Kill XV_DOUBLE_BUFFER. With the above changes, overlay video is always + doubel buffered. + + There is still the XvMC passthrough case, which makes the code slightly + ugly. Unfortunately we can't get at the bo behind this buffer. + + Changes since the last review-round: + - Don't overallocate by a factor of 2. + - Prevent possible use-after-free issue. + + Signed-off-by: Eric Anholt + +commit 60462eb5b5c1931beecc1ed2d32f91090f64174c +Author: Daniel Vetter +Date: Tue Aug 11 16:06:44 2009 +0200 + + Xv: create xvmc_passthrough helper + + This way all thes strange special cases make much more sense. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 71276dff9415322f75792a46c1a1cc0b900588b9 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:43 2009 +0200 + + Xv: scrap overlay offscreen pixmap support + + The code looks like it's been bitrotting since being copied over + from the i810 driver. Furthermore painting rgb pixmaps with the overlay + engine is in these days of modern compositing X an absolute no-go. And + textured video doesn't support it neither, so its likely never ever + used by applications. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 99afdf985fa9f763fda4bc49ccd8111960a4ae0f +Author: Daniel Vetter +Date: Tue Aug 11 16:06:42 2009 +0200 + + Xv: small cleanups in I830PutImage + + - scrap unused variable overlay + - scrap an superflous if and attach the code to the preceeding else + - tiny layout fix. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit d598456f1fe013c250530730c57ad720d38cde3a +Author: Daniel Vetter +Date: Tue Aug 11 16:06:41 2009 +0200 + + Xv I830PutImage splitup: extract i830_wait_for scanline + + Also scrap the unecessary variable sync in I830PutImage and the + accompanying obfuscated logic. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 2ba03fa78197d1cb10d6401ad02cfe9edd2623b3 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:40 2009 +0200 + + Xv I830PutImage splitup: extract i830_copy_video_data + + Just moves the code and passes back allocation failures. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 81fc74cc4ce81b9be8b9ba3bcacf1284c47ce80c +Author: Daniel Vetter +Date: Tue Aug 11 16:06:39 2009 +0200 + + Xv I830PutImage splitup: extract i830_setup_video_buffer + + Just move the code and pass back allocation failures. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 0bf4cc5130482ee0f3924f34e37fa5fc988119b3 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:38 2009 +0200 + + Xv I830PutImage splitup: extract i830_dst_pitch_and_size + + Just moves the code. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit c20ef591931b5efc5745d00c06f296c89cf32745 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:37 2009 +0200 + + Xv: kill destId in I830PutImage + + It's only used to remember that XvMC has ỲV12 as output. is_planar_fourcc + already takes care of that in all necessary cases. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 5ce944994d57176d0ddf6f6d7c7779fdfcf39cb8 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:36 2009 +0200 + + Xv: kill hw double buffering logic + + The idea for the hw double buffering support is to program two fixed + buffers and then only switch buffers in the OCMD register. But the driver + as-is always programs the new buffer address (in both register sets + when double buffered). Therefore we gain nothing by using this hw + capability. Scrap the software support for it. + + When double buffered, we now allocate just a buffer of size 2*size and + switch between the two parts purely in software. + + To make reviewing this easier, I'll shortly explain the differences of how + double-buffering (i.e. tear-free video) is achieved before and after this + change: + + - When double buffer, allocate a buffer twice the size (unchanged). + - Depending upon the currently shown buffer-half, copy the new frame into + the other buffer-half. In the old code this is done by using the right + set of buffer offsets, either *Buf0Offset or *Buf1Offset. The new code + simply programs the offset for the right buffer-half into the single set + of offsets. The end-result is unchanged. + + Now the big difference in hw-programming: + + Old: Programm new buffer offset into both sets of _hw_ buffer offset + registers. Depending upon the current _sw_ buffer, select the _hw_ buffer + and program this into the OCMD register. This just complicates matters + unnecessarly. + + New: Just always use the hw buffer 0. + + And then it's again the same story in both old and new code: + + - Execute an overlay flip (MI_OVERLAY_FLIP) to read in the contents of the + hw registers into the shadow hw registers (which are actually being used + by the overlay, not the ones we write stuff into). This is synchronized + with the respective crtc vblank by the hw. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 232418d72ee967a81e39481b9f2ee379cb685458 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:35 2009 +0200 + + Xv: use is_planar_fourcc helper some more + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 219b14310efe49aff5d3d9023d2ba440c9f702c1 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:34 2009 +0200 + + Xv: introduce planar memcpy helper + + Reduced 3 copies of the same code to one. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit b90171f16652d1145fb80a63919f76a804a94cef +Author: Daniel Vetter +Date: Tue Aug 11 16:06:33 2009 +0200 + + Xv: rename i830_display_video to i830_display_overlay + + This function only programs the overlay and is never called for textured + video. Make this obvious. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 857e40a6e00db72401717da3ed79edbf65db31d4 +Author: Daniel Vetter +Date: Tue Aug 11 16:06:32 2009 +0200 + + Xv i830_display_video splitup: extract i830_overlay_cmd + + This slightly moves around (and simplifies) the OSTRIDE reg programming, + too. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 50d70e644ea0574752d0fe160ce8d873653c913b +Author: Daniel Vetter +Date: Tue Aug 11 16:06:31 2009 +0200 + + Xv i830_display_video splitup: extract i830_calc_src_regs + + Also introduce an is_planar_fourcc helper. I'll use that one later. + + In i830_display_video this changeset moves the XVMC case (previously + obscured as the default case) around. I've figured this default case + does not make sense, here's why: + + XvMC is everywhere else handled as a planar format (e.g. in the register + programming a few lines down). Furthermore the id variable gets mapped + to FOURCC_YV12 if IS_I915(pI830) is true in I830PutImage. There's a + second caller in the offscreen overlay support code. But I think that + code is bitrotten and not reliable as an information source. + + So we have a different behaviour only for id=FOURCC_XVMC and i965 class + hw (i830 class doesn't have xvmc). I've crawled through various + sources/intel documentations. Finally in the textured video implemention + for i965 class hw (src/i965_video.c) I've found a switch statement that + puts XVMC into the same case as I420 and YV12. So also in i965 class hw + xvmc uses a planar format. + + In conclusion I claim that this code was bogus and XvMC on i965 class hw + over Xv overlay was most likely broken. + + Signed-off-by: Daniel Vetter + Signed-off-by: Eric Anholt + +commit 2841a4cd8c6c64fdf4b2203ab73b57b38a50f651 +Author: Carl Worth +Date: Mon Sep 28 20:03:11 2009 -0700 + + Increment version to 2.9.0 + + And add a reminder to RELEASING that the incremented version number + needs to be committed, (since I forgot to do this with 2.8.99.902). + +commit a790aff4fef7d0c86b7b9c0da4afdc9c0aba6636 +Author: Carl Worth +Date: Mon Sep 28 20:02:28 2009 -0700 + + NEWS: Add notes for the 2.9.0 release. + + Just renamed notes as from 2.8.99.902. + +commit a92bbcc94904684e7709b3ddaad82bc04607af26 +Author: Carl Worth +Date: Tue Sep 22 17:08:23 2009 -0700 + + Increment version to 2.8.99.902 + +commit ae00a0923717caec6d0dad94527da26397bd12ce +Author: Carl Worth +Date: Tue Sep 22 15:14:38 2009 -0700 + + NEWS: Add notes for 2.8.99.902 + +commit 7e7db7ac530b5282b0841585959597b54fcc633b +Author: Matthias Hopf +Date: Mon Aug 17 19:24:03 2009 +0200 + + Add new backlight driver "samsung". + +commit 7ae1d0dde6cef3437b67dbc21384cb179616a6c0 +Author: Zhao Yakui +Date: Mon Aug 31 13:51:01 2009 +0800 + + Skip setting tv format property if output crtc is NULL + + When TV is not connected and X start, after plugging TV cable again, + system will crash because output crtc is NULL. This patch will return, + do not handle crtc immediately, meanwhile set value will be effective + until user really enable output by xrandr command. + + Signed-off-by: Ma Ling + Signed-off-by: Zhao Yakui + +commit 02fe9be695f7e209944bd0f7b67950f93619feee +Author: Zhao Yakui +Date: Tue Sep 22 10:58:38 2009 +0800 + + Check whether the DVI-I/D is connected or disconnected based on EDID + + When the monitor is digital type for SDVO-DVI D, there should exist the EDID. If + there is no EDID, it should be detected as disconnected. + + Signe-off-by: Zhao Yakui + +commit 762e406d138ac80854b6a23b1078b52f6581f0d8 +Author: Chris Wilson +Date: Tue Sep 22 01:34:37 2009 +0100 + + Revert "8xx: Fallback for any non-affine transformation." + + This reverts commit 505025053d66d415e1c23ac858b9238fa8541d37. + + In theory, the non-affine paths work -- at least for the stated test case, + so re-enable them and avoid the slow work-around. + + Signed-off-by: Chris Wilson + +commit 2cc1f3cb6034dddd65b3781b0cde7dff4ac1e803 +Author: Keith Packard +Date: Sat Sep 19 17:30:57 2009 -0700 + + i8xx: Format projective texture coordinates correctly. + + Projective texture coordinates must be delivered as TEXCOORDFMT_3D + using TEXCOORDTYPE_HOMOGENOUS. This meant selecting the correct type + in i830_texture_setup, the correct format in i830_emit_composite_state + and sending only 3 coordinates in i830_emit_composite_primitive. + + Signed-off-by: Keith Packard + [ickle: tweaked to fix up a couple of use-before-initialised] + Signed-off-by: Chris Wilson + +commit 00e8de212b46a243f243b437b7eb866315ab89b3 +Author: Chris Wilson +Date: Mon Sep 21 22:14:21 2009 +0100 + + Check the correct Picture for error during creation. + +commit bd817e2d733dfdb1140874b06595ccd1ef39159b +Author: Keith Packard +Date: Mon Sep 21 17:21:17 2009 -0700 + + Split i915/i830 composite_emit_primitive into two functions. + + The i915 and i830 take similar but different data when emitting the + primitives, instead of trying to share code here, just split this + apart and avoid potentially breaking things later on. + + Signed-off-by: Keith Packard + +commit 5e80297d088e8cdbf66d765f7d252dab66c8df86 +Author: Keith Packard +Date: Fri Sep 18 21:05:23 2009 -0700 + + Remove DGA support from the driver. + + The xf86DiDGA code required that the scanout buffer always be + mappable, stay be at a fixed address in the aperture and have a + constant size. With frame buffer resizing, the latter two are no + longer true, and with KMS, we'd really prefer to not allow the former. + + The only option available to the driver is to completely disable DGA + as the modes code has internal calls to the xf86DiDGA code when + fetching new modes from the hardware. + + A fix for the DiDGA code will be added to the X server which will + automatically initialize DGA for mode switching and input, but not + frame buffer access, and not require any driver cooperation. + + Thus, the correct solution is for the driver to not call xf86DiDGAInit + at all. For old servers, this eliminates a potential catastrophic + problem where random memory is written by the X server. New servers + will get the DIX-based behaviour automatically. + + Signed-off-by: Keith Packard + +commit 4758311842a16600287c8f9f77ce0af1a31b9264 +Author: Keith Packard +Date: Fri Sep 18 20:59:52 2009 -0700 + + Remove vestigial internal rotation which broke KMS DGA/VidMode modesetting. + + Pre-2.0, the driver supported rotation internally, rather than relying + on the X server rotation support. The last piece of this dealt with + rotating the mouse coordinates and also tried to preserve rotation + across DGA/VidModeExtension modesetting requests. + + That latter bit of code broke under KMS as the rotation value was + never initialized, and when set to zero would create an invalid + configuration. This would confuse xrandr which would bail before + making any changes, leaving the user without a way to recover. + + Signed-off-by: Keith Packard + +commit 505025053d66d415e1c23ac858b9238fa8541d37 +Author: Carl Worth +Date: Mon Sep 21 13:50:09 2009 -0700 + + 8xx: Fallback for any non-affine transformation. + + There are definitely bugs in the 8xx code dealing with non-affine + transformations. Disable that code for now to get things working. + + Fixes bug #22947 ([855GM, xf86-video-intel-2.8.0] "Freeze" when RENDER extension is being used) + +commit b4d29452b929a3ef224d3625e4bc66b787c5edb7 +Author: Zhenyu Wang +Date: Mon Sep 21 15:28:09 2009 +0800 + + More dumps for Arrandale LVDS + + Signed-off-by: Zhenyu Wang + +commit 57fc09cef28bad2e3e8455b93ef2927118f8a3a3 +Author: Chris Wilson +Date: Sun Sep 20 01:02:39 2009 +0100 + + Avoid fallbacks for a1 src/mask + + Carl Worth did the hard work in identifying that the regression in + cairo between X.org 1.6 and 1.7 was caused by cairo sending an a1 + mask to the server in 1.7 whereas in 1.6 cairo used local fallbacks + (as the source was using RepeatPad, which triggers cairo's + 'buggy_pad_reflect' fallback for X.org 1.6). This was causing the driver + to do a fallback to handle the a1 mask instead, which due to the GPU + pipeline stall is much more expensive than the equivalent fallback in + cairo. + + Reference: + cairo's performance downgrades 4X with server master than server-1.6. + https://bugs.freedesktop.org/show_bug.cgi?id=23184 + + The fix is a relatively simple extension of the current + uxa_picture_from_pixman_image() to use CompositePicture() instead of + CopyArea() when we need to convert to a new format. + + Signed-off-by: Chris Wilson + +commit 33f98e4056706f4c30bb4327677ac49e82058231 +Author: Keith Packard +Date: Thu Sep 17 18:16:02 2009 -0700 + + Don't destroy bufmgr at CloseScreen time + + Under KMS, the bufmgr is not initialized at InitOutput time and so it + won't be re-initialized during server regen. Thus we must leave the + bufmgr running during regen and cannot destroy it in CloseScreen. + + Under UMS, each place the bufmgr is initialized, it checks to see if + it has already happened. Hence, we can safely leave the bufmgr running + across server regen for UMS too. + + Signed-off-by: Keith Packard + +commit ee9ad853574e3ee1a210db6207b84ecd466e08ee +Author: Keith Packard +Date: Thu Sep 17 17:57:40 2009 -0700 + + Make sure DRM output properties are freed after we're done with them. + + drmmode_output_get_modes was fetching output properties but only + freeing some of them. + + Signed-off-by: Keith Packard + +commit b8c5c996e888485c3a16d645c8490592534a7882 +Author: Jesse Barnes +Date: Tue Sep 15 19:45:47 2009 -0700 + + Eliminate cursor flicker + + We can update the cursor without hiding and showing it. In fact, doing the + hide/show causes noticable flicker when running in KMS mode. + + Signed-off-by: Jesse Barnes + +commit c2abfa8e54acab61250dba1e435760e3b1499c8c +Author: Chris Wilson +Date: Fri Sep 4 17:10:25 2009 +0100 + + Avoid fallbacks for compositing gradient patterns + + Currently when asked to composite using a gradient source or mask, we + fallback to using fbComposite(). This has the side-effect of causing a + readback on the destination surface, stalling the GPU pipeline. Instead, + like uxa_trapezoids(), we can use pixman to fill a scratch pixmap and then + copy that to an offscreen pixmap for use with uxa_composite(). + + Speedups on i915: + firefox-talos-svg: 710378.14 -> 549262.96: 1.29x speedup + + No slowdowns. + + Thanks to Søeren Sandmann Pedersen for spotting the missing + ValidatePicture(). + + Signed-off-by: Chris Wilson + +commit efbcf29dd1a1ca058b7a2a93f0685102c06c9369 +Author: Carl Worth +Date: Wed Sep 9 09:32:48 2009 -0700 + + Update version to 2.8.99.901 for snapshot. + +commit 54fa27fcd97a6735d8eb6073f5ec7d0d40a7327f +Author: Carl Worth +Date: Wed Sep 9 09:27:01 2009 -0700 + + NEWS: Add notes for the 2.8.99.901 snapshot + +commit 1a77ca74bc829e019a06fe9ad559f013054c27ff +Author: Chris Wilson +Date: Wed Sep 9 12:09:05 2009 +0100 + + i915: Restore nearest sampling + + My recent commit [94fc93] to use the pixel centre for sampling with the i830 + broke the i915. This restores the previous sampling coordinates for the + i915 whilst preserving the correct coordinates for i830. + + Fixes: gnome characters disappear + http://bugs.freedesktop.org/show_bug.cgi?id=23803 + + Signed-off-by: Chris Wilson + +commit ce10b5b6fca086eb4af45c1db28352e06ee4ce0b +Author: Zhenyu Wang +Date: Tue Sep 8 00:56:34 2009 +0800 + + Add B43 chipset support + + Signed-off-by: Zhenyu Wang + +commit 94fc93d4e2b88565dca17f72903d8991213c9ee8 +Author: Chris Wilson +Date: Sat Sep 5 09:35:10 2009 +0100 + + i830/i915: Set the sample position to the pixel center. + + And in particular we apply the nearest sample bias separately for + src/mask. + + Fixes cairo/test: + device-offset-scale + finer-grained-fallbacks + mask-transformed-{similar,image} + meta-surface-pattern + pixman-rotate + surface-pattern-big-scale-down + text-transform + + Signed-off-by: Chris Wilson + +commit ced0cc8bb28106c18473777bb184872786325e99 +Author: Chris Wilson +Date: Sat Sep 5 09:05:36 2009 +0100 + + i830: Update comments + + i830_composite() is no longer shared with i915 but + i830_emit_composite_primitive() is. + + Signed-off-by: Chris Wilson + +commit 8863706e25a73f68993d946e2f1c1040bae0f9c5 +Author: Chris Wilson +Date: Sat Sep 5 09:03:56 2009 +0100 + + i830: Trim composite setup + + Remove a couple of redundant NOOPs from the setup and correct the required + space checking for atomic batch operation. + +commit a9b12111f9787950ad6b8f295a70a872c5933c93 +Author: Chris Wilson +Date: Sat Sep 5 00:57:39 2009 +0100 + + i830: remove padding NOOPs from composite + + Bumps aa10text up from 249k to 260k! + + These NOOPs have existed uncommented since + 04d1584737fd0d14e99608a97281fd7b1549ae0e. + + Signed-off-by: Chris Wilson + +commit 9c1bf6d01ca307b7a9b91e181ad7f341862e5e1c +Author: Chris Wilson +Date: Fri Sep 4 23:31:44 2009 +0100 + + i830: do not use stale mask transform + + Not only were incorrectly falling back if we had non-affine + transformations, but we made the decision based on a stale transformation + matrix. + + Related bug 22877: + batch_start_atomic horribly breaks performance after a while + https://bugs.freedesktop.org/show_bug.cgi?id=22877 + + Signed-off-by: Chris Wilson + Tested-by: Maximilian Grothusmann + +commit e903b3ebad29d943c05ff550940034c3a43e0235 +Author: Matthias Hopf +Date: Thu Sep 3 16:34:08 2009 +0200 + + Don't set backlight level if going on->on. + + Otherwise changed backlight will be reset upon DPMS switch off, because first + this function is called with DPMSModeOn. + +commit 91f26937c1a3a4f33da86aa6b62ab9b288a54e15 +Author: Matthias Hopf +Date: Tue Aug 18 18:44:38 2009 +0200 + + Use "Backlight" as backlight brightness property. + + BACKLIGHT is now deprecated, though still usable. + +commit dbc8944ee9e6755ab11dfc7375c3394f531a49ce +Author: Matthias Hopf +Date: Tue Aug 18 18:34:45 2009 +0200 + + Add get_property support. + + So far only BACKLIGHT is changed. + +commit c18fc7955dc2aec878dd3bea1d51aaecf3f08858 +Author: Matthias Hopf +Date: Tue Aug 18 18:05:45 2009 +0200 + + Don't ignore backlight level change to the same level. + + If set externally to a different level, this would result in a no-op. + OTOH if the display is switched off (DPMS) you do not want the change to take + place immediately, but rather to be saved and set later when the display is + active again. + +commit fe7693c94a396b9d17bb66a000178750a432ce3a +Author: Zhenyu Wang +Date: Wed Sep 2 22:57:33 2009 +0800 + + Make DGA optional + + As DGA is optional in xserver, we should check this too instead + of always trying to init DGA. + + Found when update xserver to 6fffcd5825454a7fe58ffbcfb219f007cf38e731, + but not update xf86dgaproto, which caused X fails to start. + + Signed-off-by: Zhenyu Wang + +commit 5812531e08147576de776b2dd64e7f94c08eb851 +Author: Carl Worth +Date: Fri Jul 31 11:20:23 2009 -0700 + + debug: i830_valid_command: Return invalid for subopcodes with no name + + Previously the code would always return the count, before ever looking + into the _3d_cmds table to see if there was actually a valid command. + + Thanks to Alan Coopersmith who reported that the code was confusing + parfait: + + https://bugs.freedesktop.org/show_bug.cgi?id=21666 + +commit 7c48c21b22bf5862c5a35bda1635753cc5a7197c +Author: Zou Nan hai +Date: Thu Aug 27 09:47:12 2009 +0800 + + set correct value for indirect access check bound + +commit 6361c3b9af39265df9222b1f3b6fb9c4197087c1 +Author: Keith Packard +Date: Tue Aug 25 19:23:27 2009 -0700 + + Fix SHM functions to work with server after 1.6.0 + + Signed-off-by: Keith Packard + +commit 2786a66719a6dbb735eb7c551c412475c30ffa51 +Author: Keith Packard +Date: Tue Aug 25 18:35:54 2009 -0700 + + KMS: allocate one bo per crtc for cursor + + The KMS API doesn't provide for sharing a single bo for multiple + cursor images, so allocate one bo for each crtc to hold the cursor + image. KMS also only supports ARGB cursors, so don't bother to + allocate buffers for two color cursors. + + Signed-off-by: Keith Packard + +commit e51126c57132492c664f86981c55b166dbb54c79 +Author: Keith Packard +Date: Tue Aug 25 18:34:25 2009 -0700 + + Add cursor registers to debug dump output. + + Signed-off-by: Keith Packard + +commit 5fa8d04d9c86f343802c05bd3e11c6e733f01b63 +Author: Keith Packard +Date: Tue Aug 25 18:33:04 2009 -0700 + + Reload cursors as needed when setting new modes. + + Cursor images may need rotation, or positions updated when new modes + are set. The server provides a convenience function, + xf86_reload_cursors for precisely this purpose. Just call it after the + new mode is set. + + Signed-off-by: Keith Packard + +commit 1fc3f467ab3edd405adc569ac7f629077e6ffb9d +Author: Jesse Barnes +Date: Tue Aug 25 09:46:10 2009 -0700 + + Add KMS only build flag + + Rather than refactoring all our init code only to have it go away when + we remove UMS, this patch adds a build time flag to allow the driver to + assume KMS support. + + With this flag active, the driver will not request that I/O or MEM be + enabled at probe time, which can allow the server (if other drivers also + cooperate) to run as a non-root user. + + Signed-off-by: Jesse Barnes + +commit 5dccd1be3ab80b642ef2022446f5bdc1656ed943 +Author: Wu Fengguang +Date: Fri Aug 21 14:57:11 2009 +0800 + + Add HDMI audio registers + + Dump some of the audio registers at server startup time. + + (II) intel(0): AUD_CONFIG: 0x00000004 + (II) intel(0): AUD_HDMIW_STATUS: 0x00000000 + (II) intel(0): AUD_CONV_CHCNT: 0x00000000 + (II) intel(0): VIDEO_DIP_CTL: 0x20000600 + (II) intel(0): AUD_PINW_CNTR: 0x00000040 + (II) intel(0): AUD_CNTL_ST: 0x00002000 + (II) intel(0): AUD_PIN_CAP: 0x00000094 + (II) intel(0): AUD_PINW_CAP: 0x004073bd + (II) intel(0): AUD_PINW_UNSOLRESP: 0x80000008 + (II) intel(0): AUD_OUT_DIG_CNVT: 0x00000001 + (II) intel(0): AUD_OUT_CWCAP: 0x00006211 + (II) intel(0): AUD_GRP_CAP: 0x00000004 + + Signed-off-by: Wu Fengguang + +commit 38e97d2366738e83e76c72353b65edb13a9d2c7f +Author: Wu Fengguang +Date: Fri Aug 21 11:31:13 2009 +0800 + + Add intel_audio reg dumping program + + It can dump HDMI audio registers for G45. + + Signed-off-by: "Wang, Zhenyu Z" + Signed-off-by: Wu Fengguang + +commit 6955fc7a74edf6034a292c31a304577c35e925e6 +Author: Kristian Høgsberg +Date: Thu Aug 20 16:48:58 2009 -0400 + + kms: Don't use fb offset when using shadow buffer + +commit 465a4ab416b2e5ad53b96702720331a44fffa2fe +Author: Eric Anholt +Date: Wed Aug 12 19:29:31 2009 -0700 + + Align the height of untiled pixmaps to 2 lines as well. + + The 965 docs note, and it's probably the case on 915 as well, that the + 2x2 subspans are read as a unit, even if the bottom row isn't used. If + the address in that bottom row extended beyond the end of the GTT, a + fault could occur. + + Thanks to Chris Wilson for pointing out the problem. + +commit a3962e6f74ddd954ae1390d150a347745d7bdb24 +Author: Jesse Barnes +Date: Tue Aug 18 10:56:50 2009 -0700 + + Print block length of backlight table + + For debugging VBIOS dumps + +commit 320f21669900f99a7daf8f2294f37be9ad71d05f +Author: Jesse Barnes +Date: Mon Aug 17 15:19:41 2009 -0700 + + Dump LVDS backlight info from bios_reader + + Add LVDS backlight and power VBT structures and dump from the BIOS reader. + +commit a50916530426a662f5ed262892080b860a445da3 +Author: Matthias Hopf +Date: Mon Aug 17 15:53:15 2009 +0200 + + Add BACKLIGHT property support in KMS case. + +commit 376397c21eb9a7e4ea79d349af41da81c1af861f +Author: Zhenyu Wang +Date: Tue Aug 18 10:01:12 2009 +0800 + + Fix VGA plane disabling + + Only apply on G4X with SR01 bit5 workaround for VGA plane disable, and + restore behavior back for other chips to make sure other modes got disabled + too. + + For bug #17235, #19715, #21064, #23178 + + Signed-off-by: Zhenyu Wang + +commit 926c7e7d30458078f8185d4e0b9b32b40102b3d5 +Author: Matthias Hopf +Date: Thu Aug 13 13:59:55 2009 +0200 + + Add HP Mini 5101 to quirks list. + +commit 713820197755ea53003b36a920922c3c525eeeea +Author: Adam Jackson +Date: Tue Aug 11 14:50:03 2009 -0400 + + Fix the chip names printed in the log to be less obnoxious. + + Names taken from pci.ids. Pineview appears to be a platform not a GMCH, + so use the G/GM convention to distinguish. + +commit e8f0763d405a8152c74c28792c52fe12c1d41dd5 +Author: Eric Anholt +Date: Fri Aug 7 18:24:44 2009 -0700 + + Fix math in the tiling alignment fix. + +commit 222b52ef16895823fbf3a0fc0be4eb23b930ed1b +Author: Eric Anholt +Date: Fri Aug 7 18:05:29 2009 -0700 + + Align tiled pixmap height so we don't address beyond the end of our buffers. + +commit 62494407e529cfa68529b7267155a12d75418f21 +Author: Zhenyu Wang +Date: Thu Aug 6 13:52:54 2009 +0800 + + Fix typo in bios_reader for invalid pointer cast + + Fixed locally for af45482a52999b52bf41468c458808e30c100e35, but pushed + wrong commit. + +commit 79b6851148574419389ac8055b0c31b8bdac3ab3 +Author: Eric Anholt +Date: Wed Aug 5 12:45:16 2009 -0700 + + Fix sampler indexes on i965 planar video. + + We only set up one sampler, because all of our sampling is the same. By + using a non-zero index for the other two samplers, we'd dereference (likely) + zeroed data, resulting in using NEAREST filtering. This was a regression in + 40671132cb3732728703c6444f4577467fa9223f which incidentally switched from + having 6 samplers to 1. + + Bug #22895, #19856 + +commit f4e4c1a8544e264c5a1da02f4e7990a1beecf71e +Author: Zou Nan hai +Date: Wed Aug 5 15:00:37 2009 +0800 + + It seems that indirect data upper bound check in STATE_BASE_ADDRESS + is not acting like what bspec told on 965gm. + G45+ follow bspec, but we have to set it to a large value for 965gm. + +commit af45482a52999b52bf41468c458808e30c100e35 +Author: Zhao Yakui +Date: Fri Jul 24 10:44:20 2009 +0800 + + Calculate the DVO relative offset in LVDS data entry to get the DVO timing + + Now the DVO timing in LVDS data entry is obtained by using the + following step: + a. get the entry size for every LVDS panel data + b. Get the LVDS fp entry for the preferred panel type + c. get the DVO timing by using entry->dvo_timing + + In our driver the entry->dvo_timing is related with the size of + lvds_fp_timing. For example: the size is 46. + + But it seems that the size of lvds_fp_timing varies on the differnt + platform. In such case we will get the incorrect DVO timing because of + the incorrect DVO offset in LVDS panel data entry. + + Calculate the DVO timing offset in LVDS data entry to get the DVO timing + a. get the DVO timing offset in the LVDS fp data entry by using the + pointer definition in LVDS data ptr + b. get the LVDS data entry + c. get the DVO timing by adding the DVO timing offset to data entry + + https://bugs.freedesktop.org/show_bug.cgi?id=22787 + + Signed-off-by: Zhao Yakui + +commit 50e2a6734de43a135aa91cd6e6fb5147e15ce315 +Author: Dave Airlie +Date: Tue Jul 28 18:26:25 2009 +1000 + + intel: drop RES_SHARED_VGA not needed anymore + +commit f3387310f312a4a9e1d691974834c3d290c2fa32 +Author: Dave Airlie +Date: Tue Jul 28 18:27:10 2009 +1000 + + xserver: fix up for stable build + + reported by Arkadiusz Miskiewicz + +commit 9bc0096f9de4b85ca6d6a5db109e49c4364bcee7 +Author: Dave Airlie +Date: Tue Jul 28 13:55:39 2009 +1000 + + intel: since driver depends on newer server don't need to wrap this + + drop resource/RAC interactions + +commit 9a3b568d62a0b48f4a42ea5377740b2df1af432a +Author: Dave Airlie +Date: Tue Jul 28 13:32:30 2009 +1000 + + intel: update for resources/RAC API removal + +commit 3418c6c16b108e45f67f3c868d28932266f7a0bc +Author: Krzysztof Halasa +Date: Tue Jul 28 10:47:44 2009 +0800 + + h/v bias in 3DSTATE_DEST_BUFFER_VARIABLES is 4-bits wide + + Fixes bug #22370 + +commit 378445738494663f2ee1615598d4c77b870745af +Author: Dave Airlie +Date: Tue Jul 28 10:10:13 2009 +1000 + + intel: remove unneeded includes + + none of these need the resource includes + +commit 8084f76d86f048ca5b82da089fffa9665dbbcdd5 +Author: Keith Packard +Date: Sun Jul 26 13:14:05 2009 -0700 + + Allow DRM mode setting to include transformations + + This removes the explicit transform disabling code in drm_set_mode_major. + Without a fixed X server, transforms will still be broken, but even a fixed + X server can't work around this driver bug. + + Signed-off-by: Keith Packard + +commit 9a45ace207199eb40e95dc6d2670b3096e66ecd9 +Author: Xiang, Haihao +Date: Thu Jul 23 11:09:53 2009 +0800 + + XvMC: enable XvMC/XvMC-VLD on IGDNG + +commit 043b4a866ab51acffc52d2d71db3475007747571 +Author: Xiang, Haihao +Date: Thu Jul 23 11:07:13 2009 +0800 + + add compiled shader programs for XvMC/XvMC-VLD on IGDNG + +commit 7684adaa370e8b0bd22e6e7dd1d5fa05f6142bab +Author: Xiang, Haihao +Date: Thu Jul 23 10:57:22 2009 +0800 + + Check the version of intel-gen4asm tool in configure.ac + +commit 7dc95b4f1dfecbeb7e9f4a0c35fda32d020be8fe +Author: Xiang, Haihao +Date: Fri Jul 24 10:39:05 2009 +0800 + + XvMC: pin XvMC buffers under KMS. + + Under KMS, the buffer allocated by i830_allocate_memory + isn't pinned anymore. However currently 915 XvMC needs + static offsets. + + Fixes bug #22872 + +commit 12c5aeca7a3db92d3522d00f5daf338d522e2176 +Author: Eric Anholt +Date: Thu Jul 16 13:34:09 2009 -0700 + + 8xx render: Add limited support for a8 dests. + + This improves aa10text performance from 74k to 569k on my 855 laptop. + This also causes my 865 to hang on aa10text like it does on rgb10text, + thanks to actually hitting render accel. + +commit 6b7728491c3b771bcba2c7ffd75330c0a0b37f44 +Author: Eric Anholt +Date: Wed Jul 15 16:38:07 2009 -0700 + + Only align DRI2 tiled pixmaps to the DRI2 tiled pixmap alignment requirement. + + This should save significant amounts of memory for glyph and other small + pixmap storage. + + Bug #21387 + +commit 22f7cbc32b70a89d55c79bbea39fb10c50a310ec +Author: Eric Anholt +Date: Thu Jul 9 23:56:22 2009 -0700 + + uxa: Tell the driver when we're just going to immediately map the pixmap. + + This lets the driver allocate a nice idle buffer object instead of a + busy one, reducing runtime of firefox-20090601 on my G45 from 50.7 (+/- .41%) + to 48.4 (+/- 1.1%). + +commit 5ef3db45e059df136162584d00d4b0b511456a33 +Author: Eric Anholt +Date: Thu Jul 9 19:24:38 2009 -0700 + + uxa: Skip fill of temporary alpha picture that just gets copied over. + + This was needed when we were doing the mask computations in this pixmap, + but now they're done in a temporary and then uploaded later. + + This reduces runtime of firefox-20090601 from 52.6 (+/- .96%) to 50.7 + (+/- .41%) seconds on my G45. + +commit 6f3fc6b20f3daedab02e31f49678d4d2ff0fa7a3 +Author: Keith Packard +Date: Tue Jul 21 12:32:10 2009 -0700 + + drmmode_output_get_modes: Replace existing EDID property blob with new one + + This synchronizes the X EDID data with the kernel EDID data each time the + kernel data may have changed. Otherwise, X ends up stuck with the first EDID + data it sees, failing to accomodate to different monitors. + + Signed-off-by: Keith Packard + +commit 840a787a191b31ece5068e10daed04bee70bb1a2 +Merge: 0a4c4c5 5d50a94 +Author: Carl Worth +Date: Mon Jul 20 23:00:06 2009 -0700 + + Merge branch '2.8' + +commit 5d50a949b3c5d0ad2bc4cf48ab25da1f707a4f6f +Author: Carl Worth +Date: Mon Jul 20 22:59:37 2009 -0700 + + Increment version number to 2.8.0 for release. + +commit b12220bd81f3a0509a3746dac3258e53f3879b23 +Author: Carl Worth +Date: Mon Jul 20 22:59:02 2009 -0700 + + NEWS: Add notes for 2.8.0 release + + Many thanks to Gordon for his notes from http://intellinuxgraphics.org/2009Q2.html + +commit 0a4c4c5fe8ebad2dd13f5770bd90a194eebb2890 +Author: Peter Hutterer +Date: Thu Jul 16 11:40:15 2009 +1000 + + Update to xextproto 7.1 support. + + DPMS header was split into dpms.h (client) and dpmsconst.h (server). Drivers + need to include dpmsconst.h if xextproto 7.1 is available. + + SHM is now shm.h instead of shmstr. Requires definition of ShmFuncs that's + not exported by the server. + + Signed-off-by: Peter Hutterer + +commit 57c7cbade9556e7b21867e61353f0928fd553616 +Author: Owain Ainsworth +Date: Thu Jul 16 20:38:43 2009 +0100 + + accessing a pixmap if prepare_access fails is verboten. + + Don't do it, treat this the same as every other prepare access call in uxa. + + Reviewed-by: Keith Packard + Signed-off-by: Owain Ainsworth + +commit bb3007384298cb57625ec0b3868dff9b23568f3e +Author: Eric Anholt +Date: Thu Jul 16 12:56:07 2009 -0700 + + Really fix i915 render. Fail at commit --amend. + +commit 8dd7ccf37e2de6d80b556e6d18af244cefc1e417 +Author: Eric Anholt +Date: Thu Jul 16 11:40:51 2009 -0700 + + Fix 915-class Render after the 8xx-class Render fix. + + The two shared i830_composite.c, so giving i830 atomic batch support + triggered anger about starting i830's atomic area while in i915's atomic + area. Instead, split the emit-a-primitive stuff from the state emission. + +commit a1e6abb5ca89d699144d10fdc4309b3b78f2f7a9 +Author: Eric Anholt +Date: Wed Jul 15 14:15:10 2009 -0700 + + Use batch_start_atomic to fix batchbuffer wrapping problems with 8xx render. + + Bug #22483. + +commit e386e7b14b139f15205e14b173e8222bf38d9e18 +Author: Keith Packard +Date: Wed Jul 15 09:43:04 2009 -0700 + + Reset framebuffer offset when rebinding aperture (22760). + + scrn->fbOffset may be changed when binding objects to the aperture during + server initialization or VT enter. This was accidentally removed when the + NoAlloc option was eliminated. + + Signed-off-by: Keith Packard + +commit b74bf3f9a65af9e72921d4e9028d9d4d023f8bc6 +Author: Barry Scott +Date: Mon Jul 13 16:34:20 2009 -0700 + + Fix XV scan line calculation when rotated. + +commit 82905c7c0b871a97ec435a765c2ca407903ba595 +Author: Carl Worth +Date: Mon Jul 13 05:29:49 2009 -0700 + + Increment version to 2.7.99.902 + +commit 925bc6cbd430a00928fac2ef58724dd37c3bc349 +Author: Carl Worth +Date: Mon Jul 13 05:27:40 2009 -0700 + + RELEASING: Fix typo in instructions + +commit 67c0afc7b7446a7b98aa7c65043ddba4c7c72b82 +Author: Carl Worth +Date: Mon Jul 13 05:27:06 2009 -0700 + + NEWS: Add notes for 2.7.99.902 + +commit 34c674dd45879b8ba8395b93b16c8a9e7b848f1f +Author: Keith Packard +Date: Sat Jul 11 22:53:42 2009 -0700 + + Remove vestiges of NoAccel options from i830_driver.c + + The enum and OptionInfoRec weren't removed in the initial patch + + Signed-off-by: Keith Packard + +commit 33d6e7a2355dfb8ad324c4fa28ce61c7e051b435 +Author: Keith Packard +Date: Sat Jul 11 22:53:11 2009 -0700 + + intel.man: Mark NoAccel option as i810/i815 only + + The NoAccel option is not valid for other chips. + + Signed-off-by: Keith Packard + +commit ed8a9a94e1a670ca35311c9ed83d0c479530d41a +Author: Keith Packard +Date: Fri Jul 10 17:13:14 2009 -0700 + + i830_uxa_prepare_access: Flush and wait for idle for non-bo pixmaps + + Without kernel support and explicit knowledge about where in the ring the + last rendering operation for a specific pixmap was, we must synchronize with + any outstanding rendering before accessing a pixmap which does not have a + buffer object. + + Signed-off-by: Keith Packard + +commit cb19ac207b784d814f6f389110fd1b21a0f34e8b +Author: Keith Packard +Date: Fri Jul 10 14:01:02 2009 -0700 + + KMS: Keep screen pixmap devPrivate.ptr NULL during init and resize + + The frame buffer only has a valid address between prepare_access and + finish_access calls, so remove all other attempts to compute an address from + the driver. + + Signed-off-by: Keith Packard + +commit 704b88dd50a7e7e3f362264b86d0401bee8603aa +Author: Keith Packard +Date: Wed Jul 8 13:06:47 2009 -0700 + + i830_bind_memory: Under UMS: Bind GEM bos with dri_bo_pin, else through the GART + + We only need to get static offsets for objects when not running KMS, + otherwise the kernel will manage those as needed for us. + + Binding objects is done in one of two ways. For GEM buffer objects, we use + dri_bo_pin. For GART allocated memory, we bind that to the GART. + +commit 7b273732f70e91df8b41d5c48e1379271557dd8e +Author: Keith Packard +Date: Wed Jul 8 11:53:13 2009 -0700 + + Allocate GTT space for GEM only under UMS + + GEM requires GTT space to map objects. Under KMS, the kernel driver has + already provided all available GTT space to GEM, so the X server need not do + anything. + + Signed-off-by: Keith Packard + +commit 56bfee8705f5d7d965227013b205dbc4c93e220c +Author: Keith Packard +Date: Fri Jul 10 14:49:20 2009 -0700 + + Always set screen pixmap data pointer at init and resize times + + For non-DRM environments, the screen pixmap will be GART allocated memory + and not a libdrm buffer object and so uxa will only use devPrivate.ptr to + find the associated memory. Make sure devPrivate.ptr is set each time the + framebuffer is allocated so that uxa will be able to draw to it. + + Signed-off-by: Keith Packard + +commit 98087a0b966d5dc69faf72719153a2c878ba3de1 +Author: Keith Packard +Date: Wed Jul 8 11:47:25 2009 -0700 + + Make xorg.conf DRI option work under KMS. Fix name of I830AccelMethodInit + + KMS mode does not call I830AccelMethodInit as that does the user + modesetting initialization (yes, it was misnamed), but that means that the DRI option + was ignored. Create a new i830_check_dri_option function to do the option + detection, then remove that from I830AccelMethodInit, which is renamed + i830_user_modesetting_init to reflect what it actually does. + + Signed-off-by: Keith Packard + +commit d655a3ff423e69c19a5dc07140cbf3caaa32cb86 +Author: Keith Packard +Date: Wed Jul 8 18:06:40 2009 -0700 + + Remove NoAccel support + + This removes yet another 'debugging' option that hasn't seen real use in a + long time, and wasn't supported under KMS in any case. + + Signed-off-by: Keith Packard + +commit 4e4b947f0b13f4a62606ccfd5729d5eb26ca0e92 +Author: Eric Anholt +Date: Thu Jul 9 15:52:16 2009 -0700 + + Remove bad comment about 3DSTATE_DRAWING_RECTANGLE size. + +commit 9155cfca75a207bce0fad945f32f0cb33eab8c4e +Author: Eric Anholt +Date: Thu Jul 9 14:16:07 2009 -0700 + + Fix lols in trying to figure out whether this is a 64-bit build. + + Noticed by: Michel Dänzer + +commit 40e7c9505265823786cf730214db84812a5e494e +Author: Eric Anholt +Date: Mon Jul 6 11:54:50 2009 -0700 + + Refuse to allocate giant BOs on 32-bit systems. + + The overcommit of address space combined with these buffers hitting SW + fallbacks all the time means that we're probably better off telling the + application "no" instead of likely silently failing later. + + Bug #22601. + +commit 6337cd23e692cae789d07f429442c425c18e1d4f +Author: Eric Anholt +Date: Wed Jul 1 15:54:38 2009 -0700 + + Initialize the other argument to drmSetInterfaceVersion. + + The kernel ignores it if dd_major is -1, anyway. + +commit 216d939858abc924f2e32c95518f937f29ea018e +Author: ling.ma@intel.com +Date: Tue Jul 7 14:26:02 2009 +0800 + + enable sdvo lvds scaling function + + Currently we implemented basic sdvo lvds function, + But except for sdvo lvds fixed mode, we can not switch + to other modes, otherwise display get black. The patch + intends to work for all modes whose HDisplay and VDisplay + are lower than fixed mode. + + Signed-off-by: Ma Ling + +commit 0402f4f331148084552bd3963dbcb3fb900be8ea +Author: Simon Farnsworth +Date: Thu Jun 18 12:33:47 2009 +0100 + + Raise XV limit to 2048x2048 to match hardware limits. + + The bigrequests limit isn't present in current X servers (tested using + textured video on a 965 with both image and window at 2048x2048 on a + 1920x1200 display, and image at 2048x2048, window at 1024x1024). + + Remove the artificial limit, enabling full-screen HD video when + rotated. + +commit a66357832388ba9db21a4b3bf8311d9d1f1ab308 +Author: Keith Packard +Date: Tue Jul 7 14:13:57 2009 -0700 + + non-DRI FB resize failed to assign the screen pixmap devPrivate.ptr (22328) + + When not using DRI, the screen pixmap is not in a bo, and so the usual + enable/disable access functions don't adjust the pixmap devPrivate field, + leaving it to the frame buffer allocation code to assign this correctly. + + During mode setting and fb resizing, FB access is disabled, and the + screen pixmap devPrivate is stashed away by xf86EnableDisableFBAccess, + to be restored when FB access is turned back on. This means that we have to + set the pixmap devPrivate.ptr (in case xf86EnableDisableFBAccess doesn't + do this), along with storing the address in the scrn->pixmapPrivate field. + + Signed-off-by: Keith Packard + Reviewed-by: Jesse Barnes + +commit c889b34e432198d5410a068eff3089ff5314ac27 +Author: Chris Wilson +Date: Tue Jul 7 18:05:01 2009 +0100 + + Check for a valid I830Ptr before closing master. + + After failing to become DRM master, the X server dies attempting to close + the master fd during free: + + (EE) intel(0): [drm] failed to set drm interface version. + (EE) intel(0): Failed to become DRM master. + (EE) intel(0): failed to get resources: Bad file descriptor + (EE) intel(0): Kernel modesetting setup failed + + Backtrace: + 0: X(xorg_backtrace+0x3b) [0x8133a3b] + 1: X(xf86SigHandler+0x55) [0x80c7945] + 2: [0xb805d400] + 3: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7b4bfcc] + 4: X(xf86DeleteScreen+0x6b) [0x80d465b] + 5: X(InitOutput+0x548) [0x80b0158] + 6: X(main+0x1cb) [0x807220b] + 7: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7d107a5] + 8: X [0x8071881] + Saw signal 11. Server aborting. + ddxSigGiveUp: Closing log + ddxSigGiveUp: re-raising 11 + Segmentation fault + + Signed-off-by: Chris Wilson + +commit 705042f497b7b3843c2dcc5c160fb8dfeac1472a +Author: Keith Packard +Date: Mon Jul 6 13:49:31 2009 -0700 + + Handle DRI2INFOREC version 3 + + This DRI2 version does not support the old CreateBuffers/DestroyBuffers + interface anymore. + + Signed-off-by: Keith Packard + +commit 2ebc7d32e47b5edd5b776c39f936ed4e053caac2 +Author: Keith Packard +Date: Thu Jul 2 13:13:14 2009 -0700 + + Update to multi-API DRI2 interface + + The DRI2 interface was changed to support both old and new drivers in an + API/ABI compatible fashion. This change syncs the intel driver with the new + version of the DRI2 API. + + Signed-off-by: Keith Packard + +commit f6f79eb629184366b1355743d601129a526da90c +Author: Rémi Cardona +Date: Mon Jul 6 11:01:31 2009 +0200 + + remove unused shader program + + This file is not even referenced by any Makefile.am + + Acked-by: Zhenyu Wang + +commit 7e722ada533777c5e9ddf44bb4d770bacf8e13bf +Author: Zhenyu Wang +Date: Mon Jul 6 16:25:13 2009 +0800 + + Disable FBC on IGDNG + + Don't make FBC count for memory allocation. + + Signed-off-by: Zhenyu Wang + +commit 74227141923a2f5049592219ab80e8733062a5d9 +Author: Barry Scott +Date: Tue Jun 23 14:14:50 2009 +0100 + + Fix segv for clipped movie window + + When playing a movie that is clipped on its left and right edges the Xorg + server will SEGV sometimes. This is because the intel driver ignores the + clipping info when it copies the planes out of the XV data. + + The check for the optimised copy was wrong to ignore the width required. + Which leads to too much data being copied by the memcpy. It the source buffer + happens to end exactly on a page boundary the server will SEGV. + + As we reviewed the code we checked the calculation of src1, src2 and src3. + The patch includes additional comments to make it clear what the elements of + the calculation are. + + This bug exists in git head and we also see it in 2.4.1. + + Barry + + Reviewed-by: Ian Romanick + +commit c1755599db1d9a20954b84ccc07afd892bb6ac9e +Author: Jesse Barnes +Date: Thu Jul 2 13:04:51 2009 -0700 + + Clear the bo on the rotate scratch pixmap + + Since the scratch pixmap header will be re-used after allocation, we + need to clear its bo attachment when we stop using it, otherwise a later + user will use a bogus bo. + + Reviewed-by: Keith Packard + Signed-off-by: Jesse Barnes + +commit 324b4686204feb3a7370eeecaff8ba44635f73ca +Author: Daniel Vetter +Date: Thu Jul 2 14:15:37 2009 +0200 + + Xv i830_display_video splitup: extract i830_update_scaling_factors + + Just moved the code, no other changes. + + Signed-off-by: Daniel Vetter + +commit c2410addbfb99fcd7069591d9f387c35ed760522 +Author: Daniel Vetter +Date: Thu Jul 2 14:15:36 2009 +0200 + + Xv i830_display_video splitup: extract i830_update_polyphase_coeffs + + To slightly clean up the implementation of i830_update_polyphase_coeffs, + introduce the two small helper functions i830_limit_coeff and + i830_store coeffs_in_overlay_regs. + + Signed-off-by: Daniel Vetter + Reviewed-by: Ian Romanick + +commit 795c11c49cf10525f02127a3629d35378d802fa7 +Author: Daniel Vetter +Date: Thu Jul 2 14:15:34 2009 +0200 + + Xv i830_display_video splitup: extract i830_update_dst_box_to_crtc_coords + + Just moved the code ouf of line. + + Signed-off-by: Daniel Vetter + +commit 4100abdf5d208bbcbb4ceabad0572c04221443c9 +Author: Daniel Vetter +Date: Tue Jun 30 13:12:45 2009 +0200 + + Xv: kill !textured condition + + This is in the overlay path and therefore always true. + + Signed-off-by: Daniel Vetter + +commit b0df0fe91e2b800ed096f369850aa1af4be2f157 +Author: Daniel Vetter +Date: Tue Jun 30 13:12:44 2009 +0200 + + Xv overlay: implement GAMMA5 errata + + - also ensure that the most significant byte is zero + - while I was looking at the code, add the Overlay suffix to + SetPortAttribute like in the textured case. + + Signed-off-by: Daniel Vetter + +commit 5ef4d3cde1335350d82469ebbaed1b547a59552c +Author: Daniel Vetter +Date: Tue Jun 30 13:12:43 2009 +0200 + + Xv: kill unneeded indirection + + overlay and textured video have the exact same QueryImageAttributes + function. + + Signed-off-by: Daniel Vetter + +commit 1e4784bf26e3c154f5673f7b5add3ef7af3b1474 +Author: Eric Anholt +Date: Tue Jun 30 19:52:36 2009 -0700 + + uxa: Fix segfault on source-only picture usage with FallbackDebug. + + Bug #22107. + +commit 7e79fc8aa93df4df37c25cf37ee0ec6c7caca1d9 +Author: Zhenyu Wang +Date: Tue Jun 30 15:40:34 2009 +0800 + + Fix 945GM VT switch in UMS + + Bug #19578. We should set private intel_crtc state according + to current, as fail to do so pipe A needs active won't be taken + care of. Also make sure pipe swap operation always set during + VT switch. + + Signed-off-by: Zhenyu Wang + +commit 50392ac8234d643c8a99e1753bdb196c0062a891 +Author: Zhenyu Wang +Date: Mon May 18 13:53:33 2009 +0800 + + Load fbcon too if kernel mode setting is checked on + + If i915 module has already been loaded and kms check is true, + it would be nice to load fbcon module too. + + Signed-off-by: Zhenyu Wang + +commit 058ad9e6ab4a00ff66046d94c2129056011ebee9 +Author: Jesse Barnes +Date: Tue Jun 30 16:02:19 2009 -0700 + + Don't try to pin buffers in KMS mode + + The only things we try to pin in KMS mode are the cursor objects and + front buffer, and those are taken care of by the kernel anyway, so we + shouldn't even bother trying to pin them (well, not entirely true, + XvMC tries to pin as well, but it needs work w/KMS anyway). + + Signed-off-by: Jesse Barnes + +commit cec9fc6f6cffce186606f39982d0d78ff7c63bbf +Author: Jesse Barnes +Date: Tue Jun 30 12:27:59 2009 -0700 + + Make KMS set_resource function return TRUE + + This is what's expected by the server, and allows the EDID for example + to be exported in the KMS case. + + Signed-off-by: Jesse Barnes + +commit 53e248af4365232416d2143a791a07c6751f8319 +Author: Jesse Barnes +Date: Tue Jun 30 12:00:28 2009 -0700 + + Use DVO timing block instead of fp_timing when parsing LFP data + + The KMS side was correct, but the UMS patch was broken. We need to use + the DVO timing block of the LFP data to get the timing, not the + fp_timing block. + + Fixes fdo bug #22529. + + Signed-off-by: Jesse Barnes + +commit 362883c2f9a3442f7678e6e815f41b21baaa3f53 +Author: Jesse Barnes +Date: Mon Jun 29 16:26:15 2009 -0700 + + Add a few error messages for DRM initialization + + Makes it easier to see where things go wrong. + + Signed-off-by: Jesse Barnes + +commit afac333bef4a0ac934f0e4d933dc5053d81ca88c +Author: Zhenyu Wang +Date: Tue Jun 30 11:10:52 2009 +0800 + + Remove unused packed yuv sampler shader programs + + Signed-off-by: Zhenyu Wang + +commit 150c9adebc0b502f19c970783f411928e5a5c3b1 +Author: Zhenyu Wang +Date: Tue Jun 30 10:42:41 2009 +0800 + + Xv: fix domain usage for binding table on i965+ chips + + Signed-off-by: Zhenyu Wang + +commit 7770958e42d60966d95702e75c704e20ae2d90dd +Author: Zhenyu Wang +Date: Tue Jun 30 10:41:26 2009 +0800 + + Add XV support on IGDNG + + This brings necessary change for IGDNG for texture video support + from 2D render code. + + Signed-off-by: Zhenyu Wang + +commit f806fe7d675b966680a63406167ce37e4f8a1ae8 +Author: Xiang Haihao +Date: Thu Jun 25 15:39:32 2009 +0800 + + Enable 2D composite on IGDNG + + This patch enables 2D composite on IGDNG. IGDNG requires + new compiled shader programs for Gen5 and some command changes. + The most notable is the layout of vertex element has changed, + but we tried to keep it as origin to not change shader programs. + Also vertex buffer state requires end address of vertex buffer + instead of origin max index. + + Signed-off-by: Zhenyu Wang + +commit 9fb34012f667e37f480085696ef9c2632d6eb7e1 +Author: Zhenyu Wang +Date: Thu Jun 25 15:30:04 2009 +0800 + + Add new compiled shader program for IGDNG + + Also check intel-gen4asm tool here for new -g option, which is + required to compile new programs. + + Signed-off-by: Zhenyu Wang + +commit 488acc4595bb7f40130afcb8bcb05656ff3ae82c +Author: Zhenyu Wang +Date: Thu Jun 25 14:05:40 2009 +0800 + + Move shader programs under its own subdirectory + + Signed-off-by: Zhenyu Wang + +commit 170cae0c8d58fc141de1d8a2f17a4328d39c1263 +Author: Jesse Barnes +Date: Mon Jun 29 12:55:43 2009 -0700 + + Only get the VBIOS in non-KMS mode + + In KMS mode, the kernel takes care of this for us, so don't bother. + +commit 6511c082459789cf279e7a4528775a1c821ad8cc +Author: Jesse Barnes +Date: Mon Jun 29 12:53:51 2009 -0700 + + Output error info if we fail to get DRM resources + + Useful for debugging. + +commit 00eb73286c3512a362dce00efdeae740772d0dcd +Author: Jesse Barnes +Date: Mon Jun 29 09:12:28 2009 -0700 + + Use swapbuffers_wait control + + Commit 1eec83a203c48822400742a1fb184b2cb52c62f7, which added the new + SwapbuffersWait option, didn't actually include the code which used it. So + add a test to DRI2's CopyRegion call, only emitting the scanline wait + command if the swapbuffers_wait option is set. + + Signed-off-by: Jesse Barnes + +commit f53b3239dbc0ed723774e386e07ac9d8ce96bb89 +Author: Zhenyu Wang +Date: Thu Jun 25 10:22:23 2009 +0800 + + Disable XvMC on 915G/GM in KMS + + These chips require physical address for XvMC surface, which + is not available in KMS case. Instead of crashing X, disable it now. + + Signed-off-by: Zhenyu Wang + +commit f0270bbb47baed78a0ff6189ae20d3ac322ec02b +Author: Jesse Barnes +Date: Wed Jun 24 14:42:08 2009 -0700 + + Fix i830_crtc_on to only check outputs associated with the given CRTC + + Otherwise we may end up returning a false positive if some other output & crtc + are on, but not the one in question, again leading to hangs. + + Reported-by: Eric Anholt + Signed-off-by: Jesse Barnes + +commit 5d80e24b5fc6d6028028da6ded35389c08bfce29 +Author: Jesse Barnes +Date: Wed Jun 24 13:12:25 2009 -0700 + + Treat disabled CRTCs as "not covering" for scanline wait purposes + + Now that swapbuffers does a scanline wait to avoid tearing, it's + important to take into account the CRTC status to avoid hangs. If we + do a scanline wait when the CRTC is off (due to DPMS for example) we'll + hang the GPU. So add some code to check the CRTC DPMS status to the + i830_covering_crtc function, returning NULL if none of the covering + CRTCs are actually active. KMS vs UMS logic is hidden in new i830* + functions, cleaning up both DRI2 & video paths a bit. + + Fixes fdo bug #22383. + + Signed-off-by: Jesse Barnes + +commit 6d025e679a99778496576af9a6a6fa8c043ae811 +Author: Alan Coopersmith +Date: Tue Jun 23 09:53:14 2009 -0700 + + Harden i830 render in case check_composite didn't throw out bad formats. + + Fixes a warning in a static analysis program, and the code's a little + clearer. + + Bug #21667 + +commit 1eec83a203c48822400742a1fb184b2cb52c62f7 +Author: Jesse Barnes +Date: Tue Jun 23 15:05:03 2009 -0700 + + Add option to control swapbuffers behavior + + Until we get triple buffering, we'll want this so users can avoid taking a + performance hit on apps that render slower than the refresh rate. + + Fixes fdo bug #22234. + + Signed-off-by: Jesse Barnes + +commit bfeeac6de096256fca82244338bb45d53ee53cbc +Author: Zou Nan hai +Date: Tue Jun 23 11:31:37 2009 +0800 + + i915 xvmc, fix fd.o bug #22103 + +commit 15af8ea6ab6998bbab9f4eeda227565c409da229 +Author: Jesse Barnes +Date: Mon Jun 22 11:11:06 2009 -0700 + + Fix LFP data block fetch + + Apparently the proper way to do this is to use the LFP data pointer block to figure out the LFP data block entry size, then use that plus the panel index to calculate an offset into the LFP data block array. + + Fixes fdo bug #19450. + + Signed-off-by: Jesse Barnes + +commit 534e73ad4f234a04755917f2bf17ba821c27eb52 +Author: Zhao Yakui +Date: Thu Jun 18 09:46:32 2009 +0800 + + Don't change the blank/sync width when calculating scaled modes + + Don't the change the blank/vsync width while doing LVDS scaled modes. + And use the border instead of border minus one. + + At the same time, make sure the horizontal border and hsync are even for + the LVDS that works in dual-channel mode. So both horizontal border and hsync + start are also changed to be even, even for the LVDS in single-channel + mode. + + https://bugs.freedesktop.org/show_bug.cgi?id=20951 + + Signed-off-by: Jesse Barnes + Signed-off-by: Zhao Yakui + +commit b5cd2130f97591f4a387db1b98c940c30bc6404c +Author: ling.ma@intel.com +Date: Tue Jun 16 16:52:25 2009 +0800 + + TV: Set correct voltage level override values + + We detect TV connect status by setting DAC voltage level override + values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2, + In order correctly to set last bit as 0, at first we must clean it. + + It fixed freedesktop.org bug #21204 + + Signed-off-by: Ma Ling + +commit a6cdcd9fee0164f79075063fd163d142a55fcbc5 +Author: ling.ma@intel.com +Date: Tue Jun 16 16:47:52 2009 +0800 + + Set hot plug interrupt to detect HDMI output + + We detect HDMI output connection status by writing to HOT Plug Interrupt + Detect Enable bit in PORT_HOTPLUG_EN. The behavior will generate an specified + interrupt, which is caught by audio driver, but during one detection driver + set all Detect Enable bits of HDMIB, HDMIC and HDMID, which generate wrong + interrupt signals for current output, according to the signals audio driver + misunderstand device status. The patch intends to handle corresponding output + precisely. + + It fixed fredesktop bug #21371 + + Signed-off-by: Ma Ling + +commit 6b93afc564a5e74b0eaaa46c95f557449951b3b9 +Author: Bryce Harrington +Date: Wed May 27 03:40:52 2009 -0700 + + add pipe a force quirk for Dell mini + + Add quirk to solve issue with black screen and hang occuring after closing the + lid with attached external monitor, on Dell Mini. + + Fixes fdo bug #21960. + + Signed-off-by: Bryce Harrington + +commit eb09014ce10428bbcab04e155186382975545f0a +Author: Li Peng +Date: Tue Jun 16 15:29:57 2009 -0700 + + don't wait for vblank on rotated displays + + We may hang or wait for the wrong line if the display is rotated, so just skip + the wait in that case. + + Fixes fdo bug #22196. + +commit 6c56521bdc0443c0656271caaa795feb13bc1d6b +Author: Bryce Harrington +Date: Wed May 27 05:18:53 2009 -0700 + + pipe-a quirk for thinkpad x30 + + Fixes freeze when closing lid on ThinkPad X30. + + Fixes FDO bug # 21976. + + Signed-off-by: Bryce Harrington + +commit 246cec965958e94babf5377e6f221522b05fb458 +Author: Zhao Yakui +Date: Wed Jun 10 11:17:28 2009 +0800 + + Fix EDID for LVDS output device to add the default modes + + Fix the EDID for the LVDS output device to add the default modes.This is + similar to what we have done in UMS mode. + a. When there exists the EDID, either find the DS_RANGES block or replace + a DS_VENDOR block, smashing it into a DS_RANGES block with open refresh + to match all the defaults modes. + b. When there is no EDID, we will construct a bogus EDID and add a DS_RANGES + block with the open refresh to match all the default modes. + + http://bugs.freedesktop.org/show_bug.cgi?id=20801 + http://bugs.freedesktop.org/show_bug.cgi?id=21094 + http://bugs.freedesktop.org/show_bug.cgi?id=21346 + http://bugs.freedesktop.org/show_bug.cgi?id=21417 + http://bugs.freedesktop.org/show_bug.cgi?id=21671 + + Signed-off-by: Zhao Yakui + +commit 5d1dc7677004d445a7a781decd8c1ef9747c14fb +Author: Zhao Yakui +Date: Wed Jun 10 11:17:27 2009 +0800 + + Get the LVDS panel limit and check whether the given modeline is valid + + When the connector type is LVDS, it will traverse the mode list returned by + KMS kernel to get the LVDS panel limit. Then it will use the panel limit to + check whether the given modeline is valid. If the given modeline exceeds + the LVDS panel limit, it will be invalid. + + http://bugs.freedesktop.org/show_bug.cgi?id=20801 + http://bugs.freedesktop.org/show_bug.cgi?id=21094 + http://bugs.freedesktop.org/show_bug.cgi?id=21346 + http://bugs.freedesktop.org/show_bug.cgi?id=21417 + http://bugs.freedesktop.org/show_bug.cgi?id=21671 + + Signed-off-by: Zhao Yakui + +commit 115e28639fbf6a1eba636dafac02fadd83036c75 +Author: Zhao Yakui +Date: Wed Jun 10 11:17:26 2009 +0800 + + Add the private data for the LVDS connector + + Add the private data when the connector type is LVDS. + We can use the private_data to store the LVDS panel limit. + For example: Hdisplay, Vdisplay. + + http://bugs.freedesktop.org/show_bug.cgi?id=20801 + http://bugs.freedesktop.org/show_bug.cgi?id=21094 + http://bugs.freedesktop.org/show_bug.cgi?id=21346 + http://bugs.freedesktop.org/show_bug.cgi?id=21417 + http://bugs.freedesktop.org/show_bug.cgi?id=21671 + + Signed-off-by: Zhao Yakui + +commit 3da549f5b350dd42516e5cb3576f7fefe012d95e +Author: Zhao Yakui +Date: Wed Jun 10 11:37:03 2009 +0800 + + GFX: Initialize the SDVO device based on the valid slave address + + When the slave address is found for the SDVO port, the SDVO device will + be initialzied. + When the slave address is not found for the SDVO port, it will return + the slave address by using the following flowchart: + a. If the SDVO device info is found for another SDVO port, it will return + the slave address that is not used. For example: if 0x70 is used, then 0x72 + is returned. + b. If no SDVO device info is found for another SDVO port, it will return + 0x70 for SDVOB and 0x72 for SDVOC. + + http://bugs.freedesktop.org/show_bug.cgi?id=20429 + + Signed-off-by: Zhao Yakui + +commit 51b87b9913ba164d4d5de79e558233915b37a0a5 +Author: Zhao Yakui +Date: Wed Jun 10 11:37:02 2009 +0800 + + parse general definition block to get the SDVO device info + + The general definition block contains the child device tables, which include + the child device info. For example: device slave address, device dvo port, + device type. + We will get the info of SDVO device by parsing the general definition blocks. + Only when a valid slave address is found, it is regarded as the SDVO device. + And the info of DVO port and slave address is recorded. + + http://bugs.freedesktop.org/show_bug.cgi?id=20429 + + Signed-off-by: Zhao Yakui + +commit 6ba148bbd78783f59eed3d898638c39b950dcd89 +Author: Zhao Yakui +Date: Wed Jun 10 11:37:01 2009 +0800 + + Dynamically get the number of child device in general definition block + + The size of general definition block varies on different platform/machines. + In such case the number of child device is also different. + And it will be better to get the number of child device in general definition + block dynamically. + + The number of child device can be calculated by the following formula: + (block_size - block_header_size) / + sizeof( struct child_device_config) + + http://bugs.freedesktop.org/show_bug.cgi?id=20429 + + Signed-off-by: Zhao Yakui + +commit cdbf84f20295c8a78624318aa6fdfff3f5c8ce27 +Author: Keith Packard +Date: Thu Jun 11 13:57:09 2009 -0700 + + intel_batch_init: test have_gem, not directRenderingType + + Under KMS, directRenderingType will get set to DRI_NONE during driver + initialization. When the first batch buffer is allocated, as + directRenderingType is DRI_NONE, the GEM bufmgr would get trashed as + intel_batch_init called a fake-bufmgr specific function. + + Signed-off-by: Keith Packard + +commit 6d062e9e9fc4ac92a5dc2941b4ed0251a1dc6e11 +Author: Julien Cristau +Date: Thu Jun 11 17:15:04 2009 +0200 + + Fix xvmc build + + If we don't find xext.pc, disable xvmc instead of failing configure + Also add dependencies on xfixes and dri2proto (src/xvmc/dri2.h includes + and ). + +commit 9d3c3b056c1d4da6ef7afd3f71a5994fad810632 +Author: Carl Worth +Date: Wed Jun 10 15:30:45 2009 -0700 + + Increment version to 2.7.99.901 + + This is the first release candidate for 2.8.0 + +commit e2622045155f5aa79bacbec8f81c1231194f3033 +Author: Carl Worth +Date: Wed Jun 10 15:30:09 2009 -0700 + + NEWS: Summarize new developments for 2.7.99.901 + +commit e5bfa2702a31566fa94fa75f7289d7cbe9825420 +Author: Lukasz Kurylo +Date: Wed Jun 10 07:55:31 2009 -0700 + + DRI2 copyregion: don't wait for scanlines that won't happen + + In some configurations, it's possible to wait for a scanline outside of + a given CRTC range. Make sure that can't happen to fix multihead cases + with dead space. + + Fixes fdo bug #22203. + + Signed-off-by: Lukasz Kurylo + +commit cda5561716891484aa6f1c4a234be8d88f17f659 +Author: Zou Nan hai +Date: Wed Jun 10 16:43:30 2009 +0800 + + add missing files for previous commit + +commit 6d500be3cdecd7617dc6119b58ae273eea478af7 +Author: Zou Nan hai +Date: Wed Jun 10 15:53:24 2009 +0800 + + enable MC on g45 for player without vld patch + +commit 88da9b48737229b305da4423e9aa43a09ccdcfac +Author: Zhenyu Wang +Date: Wed Jun 10 10:45:51 2009 +0800 + + Add new chipset register dumps + + Signed-off-by: Zhenyu Wang + +commit 0d56ef94be0592aec9aa83e4a5e4ff13348640c2 +Author: Zhenyu Wang +Date: Fri Jun 5 12:59:07 2009 +0800 + + Disable composite on new chipset for now + + This depends on updated intel-gen4asm be ready for new chip. + + Signed-off-by: Zhenyu Wang + +commit 440ccc44f51d3a5d6f46c28cfcc576cad155fbbc +Author: Zhenyu Wang +Date: Fri Jun 5 12:56:04 2009 +0800 + + Add new register definitions + + Signed-off-by: Zhenyu Wang + +commit 0d8a9e2c6f58115b9b8449de52e795699ed032af +Author: Zhenyu Wang +Date: Fri Jun 5 12:51:51 2009 +0800 + + Update intel_gtt utility for new chipset GTT check + + Signed-off-by: Zhenyu Wang + +commit fb524caa3e2f1f516717669642bb4b2244f9e7e4 +Author: Zhenyu Wang +Date: Mon Jun 8 10:22:14 2009 +0800 + + Remove fixed MMIO size + + Use pci resource size instead, which will get the correct MMIO range. + New chipset uses obviously larger MMIO range. + + Signed-off-by: Zhenyu Wang + +commit 4f40b33ef4b069b18a6a18406da83a23ca6e1127 +Author: Zhenyu Wang +Date: Fri Jun 5 11:57:57 2009 +0800 + + Add new chipsets PCI ids + + Desktop and mobile version of new chipsets are added. + Also do memory config like Intel 4 series chipset. + + Signed-off-by: Zhenyu Wang + +commit accdbd23676d812d2345f86d8e3ee62f108841ff +Author: Carl Worth +Date: Fri May 29 15:34:20 2009 -0700 + + UXA: Rasterize trapezoids to system memory, not a pixmap + + Since we're only doing software rasterization right now, anyway, it + makes more sense to just rasterize to system memory and then upload + to a pixmap once complete. This avoids expensive read-modify-write + cycles. + + This results in a 2.4x speedup for a real-world test case that's + heavy on trapezoids, which is swfdec running on the following file: + + http://michalevy.com/wp-content/uploads/Giant%20Steps%202007.swf + + Many thanks to Chris Wilson for his cairo-traces repository and + cairo-perf-trace tool which makes it so easy to measure things + like this. + +commit b5e32c9cf896a0b93d193d797a8e83b4aa4691fb +Author: Carl Worth +Date: Fri May 1 13:51:39 2009 -0700 + + Rename i830_exa.c to i830_uxa.c + + It was just confusing otherwise, (since the EXA code has all been + removed now). + +commit ee539e58c3bf39766c560d625f6e4158d419e64e +Author: Kristian Høgsberg +Date: Mon Jun 8 21:14:14 2009 -0400 + + Fall back to fb pixmaps for backing glyph pictures + + GEM pads pixmaps to 512 byte stride and backs them with a kernel side + buffer objects. We typically don't render out of glyph pictures, so + we're incurring a lot of overhead per glyph by allocating a GEM pixmap + per glyph. By looking at the usage hint, we can fall back to + fbCreatePixmap for pixmaps backing glyph pictures, which gives us + a nice tight malloced pixmap. The fast path for text rendering is + compositing from the glyph cache pixmap to the destination, which + shouldn't be significantly affected. + + Quick bit of testing: + (firefox-20090601) + xlib-rgba-before 384512.49: 1.01x + xlib-rgba-after 389633.94: 1.00x + The difference being within the margin of error for the benchmark. + + Signed-off-by: Eric Anholt + Tested-by: Chris Wilson + +commit 4698b3bd79452ae2066a3d195cf58dd5e30c93f3 +Author: Xiang, Haihao +Date: Fri Jun 5 10:43:50 2009 +0800 + + xvmc: don't include xf86dri.h + +commit 4d9f3a21ab9b2737fe7a5a088c2da1b0c2be7f04 +Merge: b8e360b 52054b6 +Author: root +Date: Thu Jun 4 10:27:41 2009 +0800 + + Merge branch 'xvmc-vld' + +commit b8e360bf2b77d28559d15a7c0f9c766848eb6ced +Author: Eric Anholt +Date: Wed Jun 3 10:12:25 2009 +0000 + + Fix segfault in DRI2 vblank syncing if the region isn't onscreen. + + Also, fix some weirdness in the checking for whether the target was the + screen. + +commit 5901a67fc85ac80fabfa98b78202a388445275c3 +Author: Eric Anholt +Date: Wed Jun 3 10:00:50 2009 +0000 + + Fix some drawable abuse in i830_dri.c + + We were casting pixmaps to drawables even if they weren't pixmaps. They did + happen to work out since we only used the drawable record out of them. + +commit 5e48146777921b693c828af9566a77422cc4f85f +Author: Eric Anholt +Date: Wed Jun 3 09:57:10 2009 +0000 + + Replace some pixmap-related idioms with inline functions to do so. + +commit ea0b00e675281b2914450992501566122f9affe0 +Author: Ma Ling +Date: Mon Jun 1 17:13:53 2009 +0800 + + Provide mode line from VBT to xorg. + + If sdvo get modes function can't find modes from EDID, + transmit sdvo lvds modes from VBT to xorg. + + Signed-off-by: Ma Ling + +commit 9e7ee50bea5f65003f1d70cc06d8c1ace1282548 +Author: Ma Ling +Date: Mon Jun 1 17:13:22 2009 +0800 + + Fetch mode line from VBT, then keep it. + + Parse SDVO LVDS option section, then according to panel type + fetch fixed mode line from SDVO LVDS DTDS section . + + Signed-off-by: Ma Ling + +commit 88f766be008008d76c150e3ac16f09d4ecbb6d53 +Author: Ma Ling +Date: Fri May 15 15:22:11 2009 +0800 + + Wait doubled regis to be stable for load pipe detection + + We have two approaches for VGA detections: hot plug detection for 945G onwards + and load pipe detection for Pre-945G. load pipe detection will get one free + pipe ,and set border color as red and blue, then check CRT status by + swf register. Because pipe registers in hires mode are double buffered, + once set force border bit in pipeconf register, we have to wait for + a vblank until it is effective, otherwise result is unstable. + + It fixed freedesktop bug #20463 + + Signed-off-by: Ma Ling + +commit 6a635be5ea2b2df9d6b9a8006325244394038474 +Author: Ma Ling +Date: Fri May 15 14:01:18 2009 +0800 + + Set activation periods as 64 cdclk sync up with KMS + + We use force CRT detect trigger bit(1 << 3) to detect VGA in hot plug mode, + which triggers a CRT hotplug/unplug detection cycle independent of the + interrupt enable bit(1 << 9), so keep bit 9. + And although spec says CRT_HOTPLUG_ACTIVATION_PERIOD_64(1 << 8) is only useful + for mobile platform, it is also required to detect vga on G4x platform correctly. + Tested the patch on G45/G43/Q45 platforms with no regressions + + It fixed freedesktop.org bug #21120 and part of bug #21210. + + Signed-off-by: Ma Ling + +commit ec2fde7c8250fdc30984f16c8a1d3587d70b0144 +Author: Jesse Barnes +Date: Tue Jun 2 16:42:56 2009 +0100 + + Sync DRI2 CopyRegion to vertical retrace + + Akin to the Xv code, wait for the scanline to be outside the range to be + copied by the DRI2 CopyRegion hook. + + Fixes fdo bug #20664. + + Reviewed-by: Eric Anholt + Signed-off-by: Jesse Barnes + +commit 704771f1c595df481d244a6f074e9f5620d4a720 +Author: Adam Jackson +Date: Thu May 28 15:03:45 2009 -0400 + + Remove useless loader symbol lists. + +commit 8e942b70cb9a784b3f1311affd6fc74c4bcf68bb +Author: Carl Worth +Date: Thu May 21 13:12:52 2009 -0700 + + Revert "Rely on BO pixmaps being present in acceleration paths." + + This reverts commit 4653a7db622ad54a3182d93c81331765d930db34. + + Eric was getting a little too ambitious about our brave, new world. + We do still want the driver to work with old, non-GEM kernels + after all. + +commit 1a039f4371bec455cad43f0fb7b329f2ee09a974 +Author: Eric Anholt +Date: Mon Apr 27 17:45:02 2009 -0700 + + Fold GEM detection into DRM master open. + + We don't have anything to do with the DRM unless it's GEM-enabled, unless + we were to support GEM-but-not-DRI2, which doesn't seem useful. + + Compilation fixes by Carl Worth + +commit a04a51c9bb6066454e0fda3c7897f97dab436358 +Author: Eric Anholt +Date: Mon Apr 27 17:29:36 2009 -0700 + + Open the DRM and keep the handle throughout server startup to finish. + + This will let us configure the server from start to finish with the + most pertinent information available (KMS vs UMS, DRI2 vs non-DRI). Also, + we now close the DRI2 fd at terminate, which we didn't before. + + This duplicates some code from DRI1 for getting a master FD like I'd done in + DRI2, but given that we weren't loading DRI1 ourselves, this is also a + bogosity cleanup, and avoids allocating the extra DRI1 private. + +commit c3bf8b980134a2761701e4bc18235695a1cb07a4 +Author: Eric Anholt +Date: Thu May 21 11:05:01 2009 -0700 + + Fix backwards logic on whether to sync to vblank or not. + + Thanks to Michel Dänzer for catching it. + +commit ad2128825ba28551cfef203da017151e2eac32ef +Author: Kristian Høgsberg +Date: Wed May 20 12:32:10 2009 -0400 + + Only return FALSE when dri_bo_map() fails + + Small typo in the previous commit. + +commit 09beee378cecd1079e7a9fa6eee8f084d680d37e +Author: Eric Anholt +Date: Mon May 18 18:01:05 2009 -0700 + + Don't do GTT maps on objects bigger than half the available aperture size. + + The basic problem is that software fallbacks will do single instructions that + copy from one GTT-mapped BO into another GTT-mapped BO. If we can't get both + of them bound simultanously, we fault one in, retry the instruction, fault the + other in (kicking out #1), retry the instruction, fault #1 back in + (kicking out #2), etc. + + Note that we'll still get into a nasty spot if you do a composite operation + with a mask where all 3 are big-but-less-than-half-available-aperture, where + you'll thrash. It at least means you'll make progress, though, since each + instruction will only be operating on two BOs at at time, and the situation + seems unlikely. + + Bug #20152 (3/3) + +commit 52054b6a4c1ca5117c9750361f71aedd91220c39 +Author: Li Shao Hua +Date: Tue May 19 16:27:32 2009 +0800 + + switch XvMC to gem + +commit 34660fd2df5d61b77ed7041d32ac29053fc94f5a +Author: Eric Anholt +Date: Fri May 15 23:21:05 2009 -0700 + + Only sync XV to vblank when drawing to the frontbuffer. + + This fixes emitting syncs to random pipes with boxes bigger than that + pipe's vertical, leading to GPU hangs. + + Bug #21738 + +commit b622860429e00d6ab4407980232659c283a8fe8d +Author: Xiang Hai hao +Date: Mon May 18 17:12:30 2009 +0800 + + DRI2 for XvMC + +commit 50c10ededba15dd0c118f1b65756362061491090 +Merge: 13c730e 87332a7 +Author: Zou Nan hai +Date: Mon May 18 17:11:28 2009 +0800 + + Merge branch 'master' into xvmc-vld + +commit 87332a7cc16af82aa47e07fbf90da3635b071dbf +Author: Keith Packard +Date: Mon May 11 13:52:00 2009 -0700 + + Use drm_intel_bo_disable_reuse API to flag scanout and cursor buffers + + Buffers referenced by the kernel for scanout or cursor display should not be + reused by the driver. Use the new drm API to disable reuse of these buffers. + + Signed-off-by: Keith Packard + +commit ebe05200df381c0e6ee636f0f83440bfedea9bcb +Author: Jesse Barnes +Date: Fri May 15 08:50:17 2009 -0700 + + Add --enable-debug flag to configure + + Defaults to enabled. + +commit 04772b6c09a88f0483c2a7efc48029967c77b9bc +Author: Keith Packard +Date: Thu May 14 16:57:11 2009 -0700 + + If DRM can't figure out which pipe to sync on, then don't sync at all. + + Syncing to the wrong pipe can wedge the hardware if the exclusion area is + larger than the vtotal + + Signed-off-by: Keith Packard + +commit 128c1c3b7d57b157604788f82bf9fd389839068f +Author: Carl Worth +Date: Wed Apr 29 14:43:56 2009 -0700 + + Use libdrm to lookup pipe for tear-free sync of XV + + Previously, the code was trying to examine a driver_private field, + but those fields are only set by the userland-modesetting code so + would fail in the case of KMS. This fixes bug #21076: + + [945GME] [KMS] XV_SYNC_TO_VBLANK does not prevent tearing of xv video + https://bugs.freedesktop.org/show_bug.cgi?id=21076 + +commit 2572fcc6196aff7a2f1095d211fd85d8668647ca +Author: Wu Fengguang +Date: Thu Apr 30 19:51:26 2009 +0800 + + README: kill an evil dot + + To make copy and paste a more pleasure. + + Signed-off-by: Wu Fengguang + Signed-off-by: Eric Anholt + +commit b9462516d18bc57be5f33f57adb6c3e8beede5ff +Author: Eric Anholt +Date: Tue May 12 18:53:27 2009 -0700 + + Remove dead "avail" variable from XAA stuff. + +commit 1c68bc376a9cb3c0a010c8e28f69a776755c8f64 +Author: Jesse Barnes +Date: Wed May 13 13:19:53 2009 -0700 + + Add new have_gem flag + + Prior to this patch, code that wanted to check whether GEM was present + would look at pI830->memory_manager. This turned out to be occasionally + problematic in the KMS case, since memory_manager didn't always get set + correctly. So add a new pI830->have_gem flag to make things clear in + the various code paths, and set it after GEM initializes or when KMS is + detected. + + Reviewed-by: Eric Anholt + Tested-by: Magnus Kessler + Signed-off-by: Jesse Barnes + +commit 52367847087206b92f18c40d356d36ab9ee89d39 +Author: Keith Packard +Date: Thu May 7 14:58:02 2009 -0700 + + Load i915 and fbcon when checking for KMS + + Signed-off-by: Keith Packard + Signed-off-by: Eric Anholt + +commit ff7494b4c4b1bd8bb6f169402a9edbe9780787bb +Author: Keith Packard +Date: Thu May 7 14:58:01 2009 -0700 + + Add DP link and GMCH M and N registers + + Signed-off-by: Eric Anholt + +commit e54a23bff068416ccbdb75d538dc7dcd40a6c95c +Author: Keith Packard +Date: Thu May 7 16:35:19 2009 -0700 + + Fallback when VT inactive + + While the VT is inactive, pI830->batch_bo will be NULL, so use that as a + simple check for when to not use the accelerator. The alternative is to + ignore VT switch and just keep drawing, which would also be fine. + + Bug #21468. + + Signed-off-by: Keith Packard + [anholt: Removed extra return FALSE -- I830FALLBACK does that.] + Signed-off-by: Eric Anholt + +commit 660bd745c21c56e330d844fe4c8eaae862a77483 +Author: Wu Fengguang +Date: Thu Apr 30 18:42:18 2009 +0800 + + Remove the offset parameter from i830_allocator_init() + + offset is redundant. i830_allocator_init() is only called + in one place with offset=0. + + Acked-by: Magnus Kessler + Signed-off-by: Wu Fengguang + Signed-off-by: Eric Anholt + +commit b1f5cc3349f6811ff4d8dc64cc291788d6726372 +Author: Carl Worth +Date: Tue May 12 11:45:03 2009 -0700 + + RELEASING: Better instructions for where to send announcements + + The xorg-announce list doesn't need to hear about development + snapshots and release candidates. The intel-gfx list is good for + that. + +commit f16ee218845ec48940ea457b921d34896d80a807 +Author: Alan Coopersmith +Date: Sun May 10 16:25:24 2009 -0700 + + Fix "Unkown" typo in two FatalError messages + + Signed-off-by: Alan Coopersmith + +commit 8d27247829fe4f55691ce68f9f4b14810fb34b32 +Author: Stijn van Drongelen +Date: Tue May 5 16:37:06 2009 +0200 + + Fix typo in (unused) INTEL_BIOS_32 macro + + Debian bug#527062 + + [jcristau: fix same typo in bios_reader.c] + Signed-off-by: Julien Cristau + +commit a8a771a853478e5f45f71d0eff3c4d55bf24d0ad +Author: Arkadiusz Miśkiewicz +Date: Wed Apr 29 00:21:18 2009 +0200 + + Restore CFLAGS after tests. + + Reverts single line of broken commit e5133a94dc78411eaef324131ea8056aeb81779e. + + Signed-off-by: Eric Anholt + +commit 8255cca2c9092f7ecb798944aa8f03fa3efcfa6c +Author: Keith Packard +Date: Fri May 1 18:34:43 2009 -0700 + + Split i915 textured video commands to fit into batch buffers. + + i915 textured video commands are quite long, but must be contained in the + same batch buffer as the 3D setup commands. When the number of clip rects + for the video becomes too large for the associated commands to fit in the + same batch buffer, this change breaks the sequence into pieces, ensuring + that each batch contains the necessary setup sequence. + + Signed-off-by: Keith Packard + +commit e5e0fb846bda3e1757b89e50d5244d28457b9fe3 +Author: Keith Packard +Date: Fri May 1 12:26:04 2009 -0700 + + Call down to lower CloseScreen before shutting down DRM allocator + + Lower level functions will destroy objects that are managed by the DRM + allocator, so make sure those are done before the allocator shuts down. + + Signed-off-by: Keith Packard + +commit cfb98f3da936907945f48dad4c2345930f7beb60 +Author: Keith Packard +Date: Fri May 1 12:23:32 2009 -0700 + + Revert "Leave allocator running until lower-level CloseScreens are done" + + Uh, oops -- the FD used to talk to the kernel is closed before the + allocator_fini function is called now. + + This reverts commit 1872869e6ffcc8e6cab820c508fe5404d7e8ff9c. + +commit 11a853bd8e5d907fe7f5bd907453bcdac9032861 +Author: Keith Packard +Date: Fri May 1 11:51:13 2009 -0700 + + Hold reference to video binding table until all rects are painted. + + The optimization of unreferencing the binding table when the relocation is + posted causes the object to be dereferenced for each box in the clip list, + causing general chaos in the buffer manager. It's easier to just hold a + reference to the object until all of the boxes are painted and then drop it. + + Signed-off-by: Keith Packard + +commit ed492131c13715b73c14d328d0668120acb58b40 +Author: Keith Packard +Date: Fri May 1 11:50:17 2009 -0700 + + 3D_STATE_VERTEX_BUFFERS takes four 32-bit values, not three. + + The spec says this command takes an extra (mbz) 32-bit value, so let's + provide it with one. + + Signed-off-by: Keith Packard + +commit 66d1536a2ecc7a3d44da4c0dbe6c85aaa4e05791 +Author: Keith Packard +Date: Fri May 1 11:48:51 2009 -0700 + + Don't bother to enable VF statistics during 965 video playback + + This was used while bringing up the driver to debug vertext fetches. + + Signed-off-by: Keith Packard + +commit 1872869e6ffcc8e6cab820c508fe5404d7e8ff9c +Author: Keith Packard +Date: Fri May 1 11:46:51 2009 -0700 + + Leave allocator running until lower-level CloseScreens are done + + The lower level close screen functions will free allocated objects, causing + a crash if the allocator isn't still available. + + Signed-off-by: Keith Packard + +commit 1142353b487c155a31011923fbd08ec67e60f505 +Author: Keith Packard +Date: Fri May 1 11:44:13 2009 -0700 + + intel_batch_start_atomic: fix size passed to intel_batch_require_space (*4) + + intel_batch_start_atomic takes an argument in 32-bit units, and so it must + multiply that by 4 before passing it to intel_batch_require_space, which + takes an argument in bytes. + + We should figure out what units we want to use and use the same everywhere... + + Signed-off-by: Keith Packard + +commit 8232177a005127a0001af4b14c3beb766958ef11 +Author: Keith Packard +Date: Thu Apr 30 15:30:05 2009 -0700 + + Allow cursors to roam past 2048x2048 limit. + + There's no reason to clip cursor positions to an artificial limit; the + hardware cursor limits always mirror the hardware display limits. + + Signed-off-by: Keith Packard + +commit 417f3784b7fae8de3559c7607a2de60661a6a448 +Author: Carl Worth +Date: Tue Apr 28 20:42:22 2009 -0700 + + Add doltlibtool to DISTCLEANFILES + + Otherwise make distcheck fails. + +commit bc9a688476f02233450eb05dfb40acbf337d679b +Author: Carl Worth +Date: Tue Apr 28 20:37:13 2009 -0700 + + NEWS: Add notes for 2.7.99.1 snapshot + +commit a90cab43209bba52d35b953f3d686a19c154fc43 +Author: Kristian Høgsberg +Date: Tue Apr 28 13:12:55 2009 -0400 + + Remove a handful of pointless comments + + CVS keywords, comments about how the source was once reformatted, + and the ad-hoc changelog comment in in i830_driver.c + +commit c231b41f3f3eb3ba9c8436d5fd93a30704ed437c +Author: Eric Anholt +Date: Tue Apr 21 15:55:01 2009 -0700 + + Remove checks for xf86RotateFreeShadow, introduced in server 1.4. + +commit e5133a94dc78411eaef324131ea8056aeb81779e +Author: Eric Anholt +Date: Tue Apr 21 15:49:01 2009 -0700 + + unifdef LIBPCIACCESS and XSERVER_LIBPCIACCESS. + + Depending on new server means these are always present. + +commit 4653a7db622ad54a3182d93c81331765d930db34 +Author: Eric Anholt +Date: Mon Apr 20 22:05:54 2009 -0700 + + Rely on BO pixmaps being present in acceleration paths. + +commit 1784efc1f0c74edda8c78fb1b0cdd989f0a088ad +Author: Eric Anholt +Date: Mon Apr 20 18:25:59 2009 -0700 + + Remove XF86DRM_MODE. + + We now depend on server 1.6 and current libdrm, so no need to ifdef it. + +commit d82ea4372fb74654eb0f37d996977003473846ed +Author: Eric Anholt +Date: Mon Apr 20 13:20:03 2009 -0700 + + Replace I830Sync's irq emit/wait code with bufmgr use. + + This pre-GEM code was all sorts of broken -- see intel_bufmgr_fake.c for + the hoops that must be jumped to use that kernel interface successfully. + Yet we continued to use it even with KMS/DRI2/UXA, which may account for + some hangs. + +commit 612c1f1f1859ce0cef41049d79cc473657d48612 +Author: Eric Anholt +Date: Mon Apr 20 16:16:48 2009 -0700 + + Remove I830_XV ifdef. + + The developers of the driver don't ever run or test without XV. Don't do it. + +commit af6892f2b873dd508994d8bbf3d67e719b535e35 +Author: Eric Anholt +Date: Mon Apr 20 16:07:05 2009 -0700 + + Replace i830WaitSync with just I830Sync(), as nearly all callers had it wrong. + + People were trying to BEGIN_BATCH()/ADVANCE_BATCH() then i830WaitSync on the + results, which wouldn't necessarily wait and lead to various painful bugs, + since only EXA called MarkSync and only for certain rendering operations. + +commit 393abc15b76804580bfee0760ddbd1fb77e66c02 +Author: Eric Anholt +Date: Mon Apr 20 15:58:35 2009 -0700 + + Now that video destination pixmaps are always in BOs, no more MarkSync. + +commit dc71573292c215f49716f4dc1ebc416c6b172995 +Author: Eric Anholt +Date: Fri Apr 17 15:13:34 2009 -0700 + + Remove can_resize, which is now always true (except when a bug interfered) + +commit 96df22740b2cdc4f82a4a36c0f77663105d9337e +Author: Eric Anholt +Date: Fri Apr 17 15:11:12 2009 -0700 + + unifdef I830_USE_UXA. + + We only have on acceleration architecture now, and you can always build it + if you're building the driver. + +commit fa81ae1637bfd7b73b43355b78c88a9b84c0393c +Author: Eric Anholt +Date: Fri Apr 17 14:01:47 2009 -0700 + + Remove EXA support. + + UXA has completely replaced EXA at this point. UXA is the same rendering + core as EXA, but relying on kernel memory management or a fake bufmgr instead + of trying to manage memory in the X Server. + +commit 1b10745a2528622a32271f64c35fcdb7b7154d11 +Author: Eric Anholt +Date: Fri Jan 23 08:39:59 2009 -0800 + + Remove XAA support. + + While EXA/UXA aren't completely good replacements (see bugzilla for + performance and stability problems), we are pretty sure at this point that + it's the right way to go and that having multiple acceleration architectures + is getting in the way of producing a stable codebase. + +commit 30c226eeb35f034c3ddb881e77454051dc210298 +Author: Eric Anholt +Date: Thu Jan 22 17:54:49 2009 -0800 + + Remove DRI1 support. + + This was blocked on wide distribution of X Server 1.6 (now in the current or + next version of major distributions) and solutions for a couple of significant + architectural problems (vblank sync and frontbuffer rendering, which we now + have code or good plans for). + + This includes disabling XVMC which is DRI1-only currently. + +commit 47591334a183881704a121ae06ebc2fadebe6f73 +Author: Eric Anholt +Date: Fri Apr 17 13:54:47 2009 -0700 + + Remove pre-server-1.5 support. + +commit 3187c7698b93f1d0e07798e9c42ca2877d55e055 +Author: Eric Anholt +Date: Mon Apr 27 14:50:54 2009 -0700 + + Fix assert at startup with DRI initialiation failure. + + In this path, we'd make it to allocator_init -> init_bufmgr without + GEM and without FbBase being initialized, leading to assertion failure + to catch this mistake. + + Comedy ensued when trying to move just the MapMem up, leading to the rest + of the commit. Some day (like tomorrow after I rebase intel-cleanup) I'll + clean this path up. + + Tested with 2 X Servers on 2.6.28 (one gets DRI2, one fails successfully), + 2 UMS X Servers on 2.6.30rc2 (each gets DRI2), and 2 KMS X Servers on + 2.6.30rc2 (success all around). + +commit fbaf13c93511547c563129527797fbef8628652e +Author: Eric Anholt +Date: Mon Apr 27 16:05:50 2009 -0700 + + Don't clear the framebuffer if it isn't currently bound. + + This segfault can be triggered in non-KMS memory init before the EnterVT, + and will happen anyway at EnterVT time. + +commit ab878118b9fb46c437a02f824d29f4a206e7fd80 +Author: Eric Anholt +Date: Mon Apr 27 16:00:05 2009 -0700 + + Don't initialize DRI2 if the fd we get is not master-capable. + +commit 385ac2197b64574f30620a203e675d8da0e1472f +Author: Eric Anholt +Date: Mon Apr 27 15:28:21 2009 -0700 + + Fix drmSetMaster/DropMaster error messages. + +commit 5b05a589efb23b2fc09b06e4271174d922b1ab02 +Author: Pierre Willenbrock +Date: Sat Apr 25 22:58:20 2009 +0200 + + format == 0 means "use default" in I830DRI2CreateBuffer + + Reviewed-by: Ian Romanick + +commit e55d943126cdd3eac7dfec5f40e794f89dbf038b +Author: Eric Anholt +Date: Mon Apr 27 11:18:07 2009 -0700 + + Don't try to do anything for I830Sync when VT switched. + + Fixes a crash with fake bufmgr and UXA. + +commit 9748aa5594a8357754c06dd82108b131260b1a71 +Author: Shuang He +Date: Sat Apr 18 11:48:08 2009 +0800 + + Free front buffer bo when X exit + + It's needed when KMS or DRI2 is enabled, or there will be memory leak. + Also fixes a segfault at startup with fake bufmgr. + + Signed-off-by: Eric Anholt + +commit b8ca146b060e6f76bf048f1f6cf6ee89d38d015e +Author: Alan Coopersmith +Date: Fri Apr 24 16:03:27 2009 -0700 + + Fix UXA to build with Sun compilers (use __func__ instead of __FUNCTION__) + + Signed-off-by: Alan Coopersmith + +commit 5d6f4f6eb7a4dcbe1ce5a134d882e56f958ed2ba +Author: Ian Romanick +Date: Fri Apr 24 12:28:13 2009 -0700 + + DRI2: If the SDK supports it, use the DRI2GetBuffersWithFormat interfaces + + If DRI2INFOREC_VERSION is defined in the server's dri2.h and has a + value greater than 1, compile to use the CreateBuffer and + DestroyBuffer interfaces. The format parameter parameter to + CreateBuffer is assumed to be the bits-per-pixel of the buffer. + + Signed-off-by: Ian Romanick + Reviewed-by: Kristian Høgsberg + +commit 106e4b44c5af6552cbd079c4ec34def9dcfb168a +Author: Zhenyu Wang +Date: Fri Apr 24 10:55:09 2009 +0800 + + SDVO: switch bus once for i2c transfer + + Before sdvo try to get edid by i2c bus, it must do switch control bus to ddc active state from sdvo only state. + However if current state has been ddc active state, redundant switch operation in our driver will cause error- + "Unable to write to SDVOCTRL_E for SDVOB Slave 0x70". The patch will do switch control bus only one time during + whole edid transmission. + + It has fixed bug #19937 + + Signed-off-by: Zhenyu Wang + Tested-by: Ma Ling + Signed-off-by: Ma Ling + +commit 8f64837e56b2de0fb8a9100d1a844fd3f18d751c +Author: Shaohua Li +Date: Mon Feb 23 15:19:25 2009 +0800 + + Disable FBC on IGD for UMS + + It appears the new chip doesn't support FBC currently. + + Signed-off-by: Shaohua Li + Signed-off-by: Zhenyu Wang + +commit 7b01aa5cc41620da5bb48f391ff98d9e82572e52 +Author: Eric Anholt +Date: Wed Apr 22 09:03:21 2009 -0700 + + Revert "fix overflow warning on videoRam" + + This reverts commit 08ebde4715b87867184d42b60762cd774e151f5c, which was + apparently untested and broke KMS. + +commit ceb3a2eaf9090d67e4dfcbed188125108ceab78d +Author: Zdenek Kabelac +Date: Tue Apr 21 18:58:23 2009 -0700 + + Remember allocated offscreenImages memory for freeing it in CloseScreen() + + Signed-off-by: Zdenek Kabelac + [anholt: renamed the member to match the variable name] + Signed-off-by: Eric Anholt + +commit 701c6bef14b5d464847cc42c5ccb66fdeb157f1a +Author: Zdenek Kabelac +Date: Tue Apr 21 18:53:07 2009 -0700 + + free allocated name inside sdvo_destroy + + Signed-off-by: Zdenek Kabelac + Signed-off-by: Eric Anholt + +commit fe71217ca86eb7ae8081bf3e26d30f2002d27691 +Author: Zdenek Kabelac +Date: Tue Apr 21 18:51:02 2009 -0700 + + Unreference allocated bos in i965 render error paths + + Signed-off-by: Zdenek Kabelac + Signed-off-by: Eric Anholt + +commit b8b6ca830b1fd6956c76a5417462ca55174cb881 +Author: Zdenek Kabelac +Date: Tue Apr 21 18:47:03 2009 -0700 + + Fix leak of some 965 render state on VT switch. + + Signed-off-by: Zdenek Kabelac + [anholt: fixed up unneeded != NULL checks] + Signed-off-by: Eric Anholt + +commit d7ca870e1ce251d42e3689a8e1e7d080ab1325fb +Author: Albert Damen +Date: Sun Apr 5 16:36:35 2009 +0200 + + Fix crash with XV with large virtual display + + If a virtual display with width > 2048 is used, the first time + an XV buffer is needed will result in a BadAlloc error message, + but the next time X would crash. + + Signed-off-by: Eric Anholt + +commit 04ed92e3db8d9fcf2a1089ed433ab67bf0969655 +Author: Eric Anholt +Date: Tue Apr 21 15:17:31 2009 -0700 + + Remove dead xoffset/yoffset from pre-randr. + +commit ab2c988767aec854d3c1702bee1e5a06bd00870c +Author: Eric Anholt +Date: Tue Apr 21 14:53:45 2009 -0700 + + Remove dead monitor detect debugger. + + watch xrandr works fine. + +commit 928a37041defcca6f57f9452ba62e67524cb4510 +Author: Eric Anholt +Date: Mon Apr 20 15:46:11 2009 -0700 + + Replace a bunch of #ifdef debug flushing/syncing with a single function. + + This removes it from a callsite where it would have just resulted in a + fatalerror. + +commit 1fc93ee184ceefaea9528bb46ae82884c44d9b36 +Author: Eric Anholt +Date: Mon Apr 20 14:42:31 2009 -0700 + + Staticize a bunch of functions and variables in the driver. + + This cleans up findstatic.pl output for the i830+ code, which resulted in + removing some code. The only odd part of this commit is the + if (0) i830_sdvo_dump() in i830_sdvo.c -- it tells the compiler that the code + is used, without using it since we want the code around while debugging. + It's also in a likely place to ask for the dump, so I think it's OK. + +commit b2d7928f195f6439ecd140e6280b958b8a1f534b +Author: Eric Anholt +Date: Mon Apr 20 14:48:59 2009 -0700 + + Use a static inline to replace if (0) to an unused stub function. + +commit 093f51646b2f2301c907e14d0ad4b1f80ff60a16 +Author: Eric Anholt +Date: Mon Apr 20 14:36:52 2009 -0700 + + Remove unused i830_output_type_names + +commit c774ef282bfb0c594479bbab3527fe5fda2a8559 +Author: Eric Anholt +Date: Mon Apr 20 14:29:17 2009 -0700 + + Remove dead mono cursor load code. + +commit 75c531b9652b3919ddbf51f8eec804e6bdbb2331 +Author: Eric Anholt +Date: Fri Apr 17 14:03:39 2009 -0700 + + Rename EXA rendering functions to UXA, since we're keeping them post-EXA. + +commit 40dbba5cf710a6e392afca73965aa48fa3953d1f +Author: Eric Anholt +Date: Fri Apr 17 15:15:27 2009 -0700 + + Remove some dead i830.h struct members. + +commit 84f69081abaeef8b05cafb64d3102eb2abdf9a8e +Author: Julien Cristau +Date: Thu Apr 16 14:27:15 2009 +0200 + + Require xserver 1.3 + + I don't think anyone tests this against an old server anymore. + + Signed-off-by: Eric Anholt + +commit 08ebde4715b87867184d42b60762cd774e151f5c +Author: Zhenyu Wang +Date: Mon Apr 20 09:43:09 2009 +0800 + + fix overflow warning on videoRam + + Note that pScrn->videoRam is an 'int'. + + i830_driver.c: In function ‘I830ScreenInit’: + i830_driver.c:3019: warning: overflow in implicit constant conversion + + Signed-off-by: Wu Fengguang + +commit 5a07ab502fe1e58e7e37fe554fb42d8d2c8c53ec +Author: Ian Romanick +Date: Fri Apr 17 20:59:04 2009 -0700 + + DRI2: Respect the src and dst parameters of CopyRegion. + + Signed-off-by: Ian Romanick + +commit 2e3b95ed0197971e81ab7509245c899e96859d5b +Author: Carl Worth +Date: Wed Apr 15 18:54:19 2009 -0700 + + Increment version to 2.7.99.1 + + This is the number we want for any development snapshots along + what will eventually become 2.8.0. (Once we get to 'release + candidates' we'll bump this up to 2.7.99.901.) + +commit c9e174b31ae3b9a138ae696d563420a841062f57 +Author: Carl Worth +Date: Wed Apr 15 18:52:38 2009 -0700 + + RELEASING: Note that --with-xserver-source is needed for make distcheck + + I was always forgetting this without this reminder. + +commit 73c3be1aa033e8c5c7ee777eb2fd43c19668fa86 +Author: Carl Worth +Date: Wed Apr 15 18:18:14 2009 -0700 + + README: Fix typos in chipset list, and point to how_to_report_bug web page + + Thanks to Gordon Jin for these suggestions. + +commit c51dddb724a79a75491369a4c3e8b7b26231e7ac +Author: Carl Worth +Date: Wed Apr 15 18:07:17 2009 -0700 + + AUTHORS: Add Robert Lowery to the authors file + + Rob got missed from my first scan since one commit lists his name as + just 'Rob' and 3 commits don't attribute him as author: + + 83d304c61ad5fdc58b0a9309dbd1e5a3f6cd9b01 + 7552d80e367fe38bbc594fe94abd649917fe54d5 + 6eecef4fed8a21dfdabef42eb69fd150b96167b2 + +commit 4b5edde5da4b3e955eb2d77004de81e47bec7f69 +Author: Robert Lowery +Date: Wed Apr 15 18:03:31 2009 -0700 + + Fix typo in comment + + Thanks to Robert Lowery for the sharp eyes on this one. + +commit 3fd5a1ecd1d5140ae07ccc279298bcadd515e97f +Author: Carl Worth +Date: Wed Apr 15 16:44:11 2009 -0700 + + RELEASING: Update instructions to reflect some minor process improvements + + We've added a NEWS file now, so that needs to be updated for each release. + + We're also now using tag names of just rather than + xf86-video-intel-. + +commit e1cace16a6130dcdd93965d2329a349d49200fa6 +Author: Carl Worth +Date: Wed Apr 15 16:33:12 2009 -0700 + + NEWS: Add note about broken PAT code in some kernels + + Hoping to cut off some false bug reports here. + +commit 9ffd1951d1f2fd2f53273d04ea29de050f07af55 +Author: Carl Worth +Date: Wed Apr 15 16:14:44 2009 -0700 + + Add AUTHORS and NEWS to EXTRA_DIST + + These new files don't do us much good if we don't distribute them in + our releases. + +commit e4cd9de2933ada3e2a4b43552729ae3a370128bf +Author: Carl Worth +Date: Wed Apr 15 16:14:03 2009 -0700 + + Add a NEWS files with release-notes for 2.7.0 + + It will be nice to have release-notes under revision control, as well + being able to document issues in an obviously time-sensitive file, + (as opposed to README where we were documenting some of this previously). + +commit 506c810f8f3db89048dda9777902f142ffeb86aa +Author: Carl Worth +Date: Wed Apr 15 16:10:52 2009 -0700 + + Clarify that the default acceleration is UXA if KMS is available. + + Stale documentation considered harmful of course. + +commit b9716b836cb2b4569c90b81f344932ac668dc5bf +Author: Carl Worth +Date: Wed Apr 15 15:39:06 2009 -0700 + + Add a new AUTHORS file + + This is a sorted list of everyone with more than 2 commits in the git + revision history. We also list some historical authors mentioned in the + man page, (with code presumably pre-dating the beginning of revision + history). + +commit 8deb3a3709a9aaa549be404566715a01246354d9 +Author: Carl Worth +Date: Wed Apr 15 15:38:11 2009 -0700 + + README: Remove almost all time-sensitive information + + This was all very stale, and is better convered in intel.man. We replace + this with a list of pointers to where to get current information, (man + page, web site, and mailing list). + +commit 9b615a52671aacf34666f90ecfff98651ce6afe2 +Author: Li Peng +Date: Fri Apr 10 14:39:35 2009 +0800 + + Turn on front buffer tiling in KMS. + + This code disabled front buffer tiling in KMS. Turn it on since kernel + handles all tiling now, this improves performance of x11perf -aa10text + from 97k to 286k on my 945GME. + + Should help with #20761, if not totally fix it. + + Acked-by: Jesse Barnes + Signed-off-by: Li Peng + +commit 053432991c812146f6e7c6f13c6ace55385c825f +Author: Ma Ling +Date: Mon Apr 13 14:27:35 2009 +0800 + + update manpage for BROADCAST_RGB property + +commit 62ba7211fe9b6aada125ebfe34cf7161e817ad6b +Author: Ma Ling +Date: Mon Apr 13 14:24:57 2009 +0800 + + set broadcast RGB mode for integrated HDMI output. + +commit 69388953ce889080d5f014123d89bf3eb45f3d8d +Author: Ma Ling +Date: Mon Apr 13 14:23:06 2009 +0800 + + set broadcast RGB mode for HDMI and TMDS from SDVOX output + + Almost all digital TVs accept broadcast RGB values from 16 to 235 for each channel, + otherwise for those uncompensated videos, when RGB values are set from 0 to 255, + they will shows black and whiter clamping, which seriously degrades picture quality. + The patch will enable the broadcast RGB mode for hdtv according to user's setting. + It fixed bug #14486 + +commit 6d345c49f693cc5cffaa00b94559d2afcb3a0864 +Author: Carl Worth +Date: Fri Apr 10 14:07:14 2009 -0700 + + Add a RELEASING file documenting the release process + + Thanks to Jesse Barnes for the original recipe. + +commit 7e516b6d24d8c0c6549a9a60fcf487e3a1615020 +Author: Jesse Barnes +Date: Wed Apr 8 16:38:08 2009 -0700 + + Silence warning in i830_dmi_store_field + + Just add a dummy ret variable to shut up gcc. + +commit 620e97bbd6a811ad69b8ac94df1fe2c9edf65549 +Author: Jesse Barnes +Date: Wed Apr 8 15:49:00 2009 -0700 + + Don't enable kernel execbuf fencing w/EXA + + If we enable kernel execbuf fence register management, it's best if the + kernel manages all fence registers. This works fine if the accel + method is managing pixmaps or doesn't use offscreen pixmaps. However + with EXA, pixmap accesses are done relative to the framebuffer BAR + mapping (pI830->FbBase) and the Screen pixmap address. So if we try to + set the screen pixmap to point at a GTT mapped (and therefore properly + fenced) address, later calls to intel_get_pixmap_offset() will call + into EXA, which will use the pseudo-random pixmap addr and the EXA + offscreen base addr (which is really just FbBase) to calculate the + offset. This will fail. So disable kernel fence reg management in the + EXA case (this is easier than adding proper EXA pixmap management to + xf86-video-intel, and makes more sense since we'll be removing EXA soon + anyway). + + Fixes FDO #21027. + + Also happens to fix FDO #21029 (as tested by Carl Worth +Date: Tue Apr 7 12:31:07 2009 -0700 + + Fix value for MI_WAIT_FOR_PIPEA_SCAN_LINE_WINDOW + + Since the change to scan-line based video sync, (rather than vblank- + based), we've only been getting tear-free video on one of the two + pipes. This fixes that bug by using the correct constant for waiting + on PIPEA. + +commit 940c2aad4d174b6609bdc49f8c99a4bc37926516 +Author: Carl Worth +Date: Mon Apr 6 14:36:33 2009 -0700 + + Don't clip video to CRTC in the case of textured video + + Since we're not limited by a single overlay plane on a single pipe, + we want to not clip at all, (so that the correct video appears on + both pipes). + + This fixes bug #20980 which shows a video spanning two pipes + being rendered incorrectly. + +commit 63b4b5efac936c674dedad8125a8dbac4f000908 +Author: Zhenyu Wang +Date: Tue Apr 7 10:53:08 2009 +0800 + + quirk LVDS on ibase MB890 855GM board + + fix bug #19529 + +commit 5d9d9a2e466474a0508a15b294a91507ccb3ccc1 +Author: Carl Worth +Date: Mon Apr 6 14:02:08 2009 -0700 + + Fix new video sync-to-blank code for multi-head + + We need to account for a non-zero Y offset for the CRTC. Without + this, we don't sync to the correct region, so tearing becomes + visible again. + +commit 3d4ee3cac1d63dfdf7b54c8ba577f3b77637499f +Author: Carl Worth +Date: Mon Apr 6 11:31:20 2009 -0700 + + Remove support for 'auto'(-1) value of XV_SYNC_TO_VBLANK + + We previously had a heurstic here where we would only sync to vblank + for windows that covered more than 25% of the screen. We don't need + this anymore since the new approach to sync, (WAIT_FOR_SCANLINE_WINDOW), + is not excessively costly for small windows. + +commit bc3312fd7c03d09a231dfebfe390fe668ad15d1e +Author: Carl Worth +Date: Mon Apr 6 11:16:40 2009 -0700 + + Use WAIT_FOR_SCAN_LINE instead of WAIT_FOR_VBLANK + + Either way, the goal is tear-free video playing. But waiting for + a scan-line window not only has the advantage of being cheaper + for small windows, but also avoids hanging the GPU in the case + of the pipe getting turned off, (by screensaver, for example), + while a batch is waiting for a VBLANK that will never occur. + + This fixes that GPU hang. + +commit 6cd914ef315036ce8e91c7b6492994353e8ed2d8 +Author: Jesse Barnes +Date: Fri Apr 3 11:15:18 2009 -0700 + + Fix offset in begin_gtt_access case + + Don't use bo->virtual in the begin_gtt_access case, use the framebuffer + mapping and bo offset instead. + + Reviewed-by: Eric Anholt + Signed-off-by: Jesse Barnes + +commit 13c730e003e805e19deee0996b2af30f69e54c4d +Author: Zou Nan hai +Date: Wed Apr 1 15:12:55 2009 +0800 + + fix + 1.multiple instance + 2.memory leak + +commit fad714c40078d22fff82dc0692a344f66ddf9680 +Author: Zhenyu Wang +Date: Wed Apr 1 10:11:35 2009 +0800 + + SDVO: fix output flag dumping for unknown type + + Found by Hugo Jacques + +commit 00de1757dd5776962bdd4c8968181878c2ebf4c9 +Author: Hugo Jacques +Date: Wed Apr 1 10:10:05 2009 +0800 + + SDVO: add composite TV out support + +commit 087f72e1f5d7d11b8795ba80a842874f5a9bb01d +Author: Jesse Barnes +Date: Tue Mar 31 07:50:10 2009 -0700 + + Match GTT unmap with map in KMS rotation case + + Missed this when the GTT unmap call was added. If we don't do this we + trigger an assertion in libdrm, since the buffer has never been mapped + normally. + + Fixes bug #20943. + + Signed-off-by: Jesse Barnes + +commit 4f046af760b92c07f59664359453933fb5358e3d +Author: Zhenyu Wang +Date: Tue Mar 31 13:49:44 2009 +0800 + + Disable LVDS detect methods + + Both methods ACPI lid and SWF bit have issues in LVDS detect from + wider testing. Fallback to origin code. + +commit e964d4e53af3a47de6d09c884be1cc0044d03bea +Author: Albert Damen +Date: Mon Mar 30 11:38:02 2009 -0700 + + Non-GEM allocations incorrectly force TILE_NONE (bug 20797) + + With -intel 2.6.3 performance was very bad when using a non gem enabled kernel + (2.6.27) and EXA. For example sauerbraten ran with 4 fps and screensaver GLBlur + with 1 fps. With -intel 2.6.1 performance was good using the same kernel. + + Git bisecting led me to commit f1ed73c1ef3e3daa9f695194dcc813167cbcb53d (in 2.6 + branch) "Make i830_allocate_memory take tiling parameters" as first bad commit. + + Using gdb I found tiling was set exactly the same in 2.6.3 as in 2.6.1, so that + was good (TILE_XMAJOR for front, back and depth buffers). + Looking further I found the line mem->tiling = TILE_NONE; (line 961 in + src/i830_memory.c) at the end of i830_allocate_memory suspicious, as + mem->tiling now already gets set via i830_allocate_aperture and some buffers do + have tiling. Removing that line indeed fixed the performance issue. Now + sauerbraten runs with 30+ fps and GLBlur runs smoothly. + +commit 51cf8a453c2bc2e8604bfc41a649e971c1ba5026 +Author: Jesse Barnes +Date: Mon Mar 30 11:27:56 2009 -0700 + + Require libdrm 2.4.6 for GTT unmap support + + Need the new functions available. + +commit 8dabcc40747bfd478f296728741240241698f165 +Author: Jesse Barnes +Date: Mon Mar 30 09:53:40 2009 -0700 + + Tiling fixes, third set + + Hopefully this concludes the fixes necessary to deal with the various + combinations of kernel and user level tiling. We have several cases to + handle: + 1) KMS (kernel handles all tiling) + 2) UMS w/memory management + kexec fencing (kernel handles all tiling) + 3) UMS w/memory mangement but no kexec fencing (userland handles tiling) + 4) UMS w/o memory management (userland handles tiling) + + For cases (1) & (2) we can use GTT mapping, which will give us good + performance and take care of allocating fence registers as needed. It's + important *not* to have userland set up fence regs in this case, since + the kernel will be using all of them. + + For case (3), we use the begin/end GTT map functions provided by libdrm, + in combination with pinning and fence register setup in i830_memory.c to + deal with tiled surfaces. This also gives us good performance and + correctness. + + For case (4) we use the old style virtual mapping + offset for dealing + with surfaces; note that UXA doesn't seem to work in this configuration + regardless of these fixes. + + Fixes bug #20803. + + Reviewed-by: Eric Anholt + Signed-off-by: Jesse Barnes + +commit 375b2e40fcb17e94538a75392950e2533c1bb031 +Author: Zhenyu Wang +Date: Wed Mar 25 11:13:52 2009 +0800 + + Disable LVDS config parsing from VBT for now + + As wider tests showed that this doesn't work for all VBIOS, so + disable it for now and reenable it after we get reliable method. + +commit defa6971c6b639ab72d9d4c85c4607d5f852b2b0 +Author: Zou Nan hai +Date: Thu Mar 26 15:24:29 2009 +0800 + + enable UV half pixel + +commit 69c84f2c8204771b68f40ed64e64657237b54546 +Author: Zhenyu Wang +Date: Thu Mar 26 13:52:05 2009 +0800 + + gitignore intel_lid + +commit fe96e517699e37cc990a14dfb48b9611a02254ed +Author: Zhenyu Wang +Date: Thu Mar 26 10:54:02 2009 +0800 + + xvmc: add missed vld g4i sources in Makefile and fix distcheck + + Don't miss the vld shader programs for dist. + +commit 91886f82a1155ca24eb895f77678ea1edfccf9fe +Author: Zhenyu Wang +Date: Thu Mar 26 10:51:05 2009 +0800 + + xvmc: move 965 mc media programs to shader/mc directory + + Also include some missed g4i files in Makefile.am, fix shader build. + +commit ebcb64fdc8a45105f529d5e15c335514ecaf1a05 +Author: Zou Nan hai +Date: Wed Mar 25 16:11:33 2009 +0800 + + XvMC VLD extension support for G4X + +commit e6af995b24767815ab30364385768867e80605c2 +Author: Zhenyu Wang +Date: Mon Mar 23 19:19:58 2009 +0800 + + KMS: hook up output properties for randr + + This gets output properties from kernel, then hook them up + for randr. So we can control output properties through randr + like in UMS. + + Signed-off-by: Zhenyu Wang + +commit b5b377806422c9538fa9f846819ad253c1a50846 +Author: Ma, Ling +Date: Wed Mar 25 14:39:46 2009 +0800 + + disable center mode for 965GM and G4X platform + + When disabling VGA mode, usually we don't need to touch VGA center mode. + However because of hardware reason, for Cresline, Cantiga & Eaglelake platform, + we have to disable center mode as well. The patch fixed bug- TV Out strobing regression, + reported by Robert Lowery in intel-gfx@lists.freedesktop.org mailing list. + + Signed-off-by: Ma Ling + +commit 74d0713e002a9781ed00fdd10eb6f75907ae796c +Author: Kalev Lember +Date: Fri Mar 20 02:21:41 2009 +0200 + + Fix VT switch with XV overlay video enabled. + + drm_intel_bo_unpin() was called with NULL argument. + + Signed-off-by: Kalev Lember + +commit b345b4e6adf00f8b2626e5c2563fc159e2295cc5 +Author: Rémi Cardona +Date: Fri Nov 14 13:55:52 2008 +0100 + + clean up man page generation and remove all traces of the i810 driver + + The i810 compatibility symlink has been broken since libpciaccess, so just + let it die. + +commit 48b91e066878db63a1558e4cd3e6d12ff9c49197 +Author: Jesse Barnes +Date: Fri Mar 20 12:33:22 2009 -0700 + + Don't manage fences part two + + Don't try to clear fences that were never installed. Missed this bit in + the last fix for #20265. + +commit 28319d60aa2d793c209043c1ce2d38b14c66a4be +Author: Zhenyu Wang +Date: Fri Mar 20 13:14:15 2009 +0800 + + Add a lid status test program "intel_lid" + +commit 636d252f3b1eac687f7b11952e949c383cb86ed4 +Author: Jesse Barnes +Date: Thu Mar 19 13:25:29 2009 -0700 + + Don't install fences if the kernel is managing them + + If execbuffer is setting up fences, it also means that the kernel is + managing them at pin time, so installing one in the 2D driver in that + case is an error. The fence should stick around as long as the buffer + is pinned (the kernel won't steal these), though it will be freed at + leavevt and re-allocated at entervt. + + On 965+ chips, the pin ioctl will *not* install a fence reg, but that's + also ok because all 965+ operations include tiling bits, and sw + fallbacks will be protected by prepare/finish access hooks, which will + either access the backing store or use the GTT, which will ensure proper + fencing at fault time. + + Fixes #20265. + + Acked-by: Eric Anholt + +commit d92e6158c86d7da873913461ef7e828bd411d8c4 +Author: Carl Worth +Date: Thu Mar 19 10:06:03 2009 -0700 + + Revert the rest of the EXA_VERSION_MAJOR bump + + This was mistakenly added in the unrelated change in revision + fe08b81d0f5d6f96e0124e6286bd24aba6e140ad + and wasn't completely reverted in the later revision + 78a60e1b66fe2e8449702dd43d9b062d279af8f1 + +commit 85e6b528582c2397ee9eb2132cd0d05ce12eb43d +Author: Ma Ling +Date: Thu Mar 19 09:10:19 2009 -0700 + + Set SSC frequency for 8xx chips correctly + + All 8xx class chips have the 66/48 split, not just 855. + + Fixes #18358. + +commit bedc894a565ce3c7a50990e3f78953fc2432ad40 +Author: Jesse Barnes +Date: Wed Mar 18 20:19:44 2009 -0700 + + Re-enable disabled outputs after rotation + + The server may have made a DPMS call before doing rotation, so after we + do the mode set with the rotated framebuffer, we need to re-enable the + corresponding output(s). + + Fixes bug #20573. + +commit 6deb26ae7bd796e88a5dd90df5f6c35fbc44e798 +Author: Jesse Barnes +Date: Wed Mar 18 09:36:58 2009 -0700 + + Create known output configuration at EnterVT time + + Since we added the pipe A force quirk (leaving pipe A on all the time), + DPMS calls to disable it have silently returned, leaving the pipe on. + If another driver (like vesafb) has enabled it, we may end up with a bad + configuration, leading to hangs or blank screens at VT switch time. + + Fixes bug #19603. + +commit 7c94227dd4fa2164bebb36234958053bf1d26c12 +Author: Ma Ling +Date: Tue Mar 17 10:33:15 2009 +0800 + + Use best PLL timing values for G4X platform + + construct function to find precise parameters from internal spreadsheet + table on G4X platform. + + Signed-off-by: Ma Ling + +commit 48db5bde9298f1126dfb42f4be8a3d61166abfd8 +Author: Ma Ling +Date: Tue Mar 17 10:41:02 2009 +0800 + + Define documented PLL timing limits for G4X platform + + These timings on G4X platform were specified by internal spreadsheet from the chipset group. + + Signed-off-by: Ma Ling + +commit 78a60e1b66fe2e8449702dd43d9b062d279af8f1 +Author: Keith Packard +Date: Mon Mar 16 08:41:52 2009 -0700 + + Revert EXA_DRIVER_KNOWN_MAJOR bump + + This was mistakenly added in the unrelated change in revision + fe08b81d0f5d6f96e0124e6286bd24aba6e140ad + +commit 1a6e70cd98abc63f24f710819961c24601afb59b +Author: Zhenyu Wang +Date: Mon Mar 16 10:19:39 2009 +0800 + + TV: fix contrast and saturation for 945G + + Bug #20670. + +commit 4e95327323e3d081b565147f7738eb49c28542bc +Author: Zhenyu Wang +Date: Mon Mar 16 09:30:22 2009 +0800 + + TV: force TV as connected with TV_Connector option + + In order to bypass failure in TV load detect, TV_Connector option + will always force TV as connected with user specified connector type. + +commit d9dbdb325543bd747cd1bfb3e1142ea6daf2b637 +Author: Eric Anholt +Date: Fri Mar 13 15:48:40 2009 -0700 + + Add shave support, enabled by default. + + This cuts down build system noise so that warnings are more visible. The + old style output can be reenabled for build system debugging using + "make V=1", or --disable-shave at configure time. + +commit c3a82106a1a1a94c9e1e465c7dc0d828c1cbf50d +Author: Eric Anholt +Date: Fri Mar 13 15:29:45 2009 -0700 + + Move contributed m4 (dolt) to a subdirectory so we can include it with others. + +commit e0aba04da0323efc079ce0a2b78139c4d0d49fa5 +Author: Eric Anholt +Date: Fri Mar 13 13:37:35 2009 -0700 + + Add DCC register dumping. + +commit a57814cc13f4287eccaf1906963b80c9205c680c +Author: Eric Anholt +Date: Fri Mar 13 13:20:35 2009 -0700 + + Add dumping of 915 and 945 fence registers. + + The debug dumper functions can now return NULL to indicate no output, so + we get appropriate results on 915, 945, and 965. + +commit 8166a7ff5c2c1e3736dd06a8453c4e4d769d8b75 +Author: Eric Anholt +Date: Fri Mar 13 13:12:33 2009 -0700 + + Add PGETBL_CTL to the debug output. + + It's nice to know when it gets stomped on. + +commit fe08b81d0f5d6f96e0124e6286bd24aba6e140ad +Author: Keith Packard +Date: Mon Mar 2 07:39:41 2009 -0800 + + Use CopyArea to load glyphs from per-glyph pixmap to cache pixmap + + With glyphs sitting in per-glyph pixmaps, there's no reason to use the CPU + to move them to the cache pixmap, and lots of reasons to use the accelerator. + + Signed-off-by: Keith Packard + +commit 2026c57cf0a352d9e6f9d208cfb7d4d550614477 +Author: Kalev Lember +Date: Fri Mar 13 21:32:08 2009 +0200 + + Fix Xv crash with overlay video. + + Bug #20585. + +commit 3ef9d85371a97ea5baee0c47787b3bb3cdaf5135 +Author: Jesse Barnes +Date: Fri Mar 13 12:21:34 2009 -0700 + + Use UXA when KMS is active + + EXA doesn't support KMS, so force UXA on if KMS is detected. And warn + the user if they've specified something other than UXA in their + xorg.conf. + + Fixes bug #20620. + +commit dc3ff0b514b609448025680778f0e95e1980a5d8 +Author: Zhenyu Wang +Date: Thu Mar 12 16:32:02 2009 +0800 + + Revert "SDVO: Switch control bus only before DDC access" + + This reverts commit ddedf19f889da2ce6d69a3afce4665e2245682fa. + + After i2c STOP, control bus will return back to internal + registers. So this brings back to origin code that we switch + to DDC bus before START. But it's ideal to only issue DDC + bus switch after STOP, not before every START, which might eliminate + some complains from SDVO device, that will be another patch later. + +commit c6b0135d209bdad3dbc641d0e264596eaf6f99d3 +Author: Zhenyu Wang +Date: Thu Mar 12 16:31:01 2009 +0800 + + SDVO: reset privates before output setup + + For multifunction encoder, forget to reset these values + will cause wrong output type in later mode setting + operations. + +commit 28e7f0d71fa09e15a68ab4f0de169474b6235093 +Author: Dan Nicholson +Date: Tue Mar 10 20:16:03 2009 -0700 + + Fix dist of xvmc sources + + The XVMC AM_CONDITIONAL is only needed around the library expression. + None of the other definitons will cause anything to be built without + libXvMC, but they're needed for 'make dist'. + + Signed-off-by: Dan Nicholson + +commit 73db44e7ac524e84e5f0fda2d60069a9e954ad1b +Author: Kristian Høgsberg +Date: Wed Mar 11 11:10:57 2009 -0400 + + Drop Legacy3D option, only use fixed texture space with non-gem. + + With this change, we always expect the 3D driver to use GEM textures + when the 2D driver uses GEM. When GEM is not available or disabled, + we fall back to legacy fixed textures. + +commit 2fcf4fcccfe7cfa1425985d21a144137eca07f4e +Author: Zhenyu Wang +Date: Tue Mar 10 14:21:36 2009 +0800 + + SDVO: fix pixel multiplier setting for TV + + We should use preferred input timing's clock for correct + pixel multiplier setting, otherwise we might get inconsistent + multiplier setting on pipe and SDVO device for some modes. + +commit fb6e00f40f713a87c760fc7603159ed11ea9b0d5 +Author: Eric Anholt +Date: Mon Mar 9 20:06:30 2009 -0700 + + Fix XV with non-GEM kernels by allocating a larger fake bufmgr. + + Ideally we'd not be using the EXA offscreen memory manager and just hand all + that memory to the fake bufmgr for non-GEM, but the fake bufmgr's too slow for + that, at least currently. So compromise and take enough memory that it will + succeed at XV allocations but hopefully not anger tiny-aperture systems too + much. + + Bug #20563. + +commit dc12c4b3eb297b2f225409eacf1f3cd521453ab6 +Author: Eric Anholt +Date: Sat Mar 7 23:22:54 2009 -0800 + + Flip the update_dri_buffers test around to only run when DRI1 is active. + + Fixes segfaults at startup with DRI2 and load detection, or with DRI disabled + entirely. + +commit 646e12a9783d1d48ef21841f0909287a876731a4 +Author: Xiang, Haihao +Date: Mon Mar 9 10:59:36 2009 +0800 + + typo in intel.man + +commit 73aa23d9150121a4e4b70a78cab910acd164abf5 +Author: Eric Anholt +Date: Fri Dec 5 13:06:05 2008 -0800 + + DRI1: Update sarea (and other information) when CRTC configuration changes. + + Bug #14423. + + Signed-off-by: Eric Anholt + +commit abb213d933ac0d808fc10d4f8d88d7b8cef76346 +Author: Eric Anholt +Date: Fri Mar 6 14:33:46 2009 -0800 + + Document the UXA AccelMethod. + + Signed-off-by: Eric Anholt + +commit 568297d327cc321f1186afc54b38d08db3f2914d +Author: Eric Anholt +Date: Thu Jan 22 17:08:19 2009 -0800 + + Don't allocate the render power saving context in KMS mode. + + That would be the kernel's job if it chooses to do it. + + Signed-off-by: Eric Anholt + +commit 4e1144108424a4525bbd97c3d5a56de06760bdd9 +Author: Eric Anholt +Date: Fri Mar 6 14:30:05 2009 -0800 + + unused variable warning fix. + + Signed-off-by: Eric Anholt + +commit 043a76a040d4576b7a8397dca805466a99bfcdd6 +Author: Eric Anholt +Date: Fri Mar 6 14:29:22 2009 -0800 + + clean up arguments to i830_allocate_framebuffer since zaphod removal. + + Signed-off-by: Eric Anholt + +commit b23f57b310b693f56af273526383221a4f8b96f5 +Author: Eric Anholt +Date: Thu Jan 22 17:17:09 2009 -0800 + + Use REGION_EQUAL in place of a local implementation. + + Signed-off-by: Eric Anholt + +commit 6b61f9945f54df7469f2b2d702b621d4d6064c3f +Author: Eric Anholt +Date: Thu Jan 22 17:19:04 2009 -0800 + + nuke unused define. + + Signed-off-by: Eric Anholt + +commit c3a747cb54acc1b037b559313e6a2113ae2ac4c7 +Author: Dan Nicholson +Date: Wed Nov 26 09:57:24 2008 -0800 + + man: Put option defaults on separate indented line + + The groff .IP macro is used to put the option defaults in a new indented + paragraph so they are separated from the explanations. + + Signed-off-by: Dan Nicholson + [anholt: hand-applied due to conflicts. mistakes are my own] + Signed-off-by: Eric Anholt + +commit d2af21a66d7e1d1dd62c6aa8fb41d3fd6045bcd7 +Author: Eric Anholt +Date: Fri Feb 27 23:38:00 2009 -0800 + + Remove configurable support for disabling XV. + + google shows one instance of this being used a year and a half ago. + +commit 755757669f0cad670cfa084d33d7c3e928d27855 +Author: Eric Anholt +Date: Fri Feb 27 22:57:15 2009 -0800 + + Remove configured SW cursor support. + + Any time we actually need SW cursors, it gets enabled automatically. + +commit 917b20ead3cacf1e88314f20edde6a02b97b96d7 +Author: Eric Anholt +Date: Fri Feb 27 23:01:28 2009 -0800 + + Remove StolenOnly support. + + We rely on having AGPGART present to successfully allocate video memory as + we configure it by default. Admit that fact, and remove support for + non-AGPGART/KMS setups. + +commit 73b7190421132ad73179c3fb7bb0e06c427dce5c +Author: Eric Anholt +Date: Fri Feb 27 22:51:22 2009 -0800 + + intel: Nuke shared-entity support (zaphod mode). + + It's been broken for years now, and KMS offers a much better chance of getting + this working sensibly without making a mess of the 2D driver. + +commit e9d6bbbe0b41e29c58a79844decd81771da85dd4 +Author: Eric Anholt +Date: Tue Mar 3 16:45:03 2009 -0800 + + remove more page flipping leftovers. + +commit 1cc9b1423c5df591c615ef9588b6eefd81448f80 +Author: Lukáš Hejtmánek +Date: Fri Mar 6 14:44:03 2009 -0500 + + Fix another VT switch leak + + The batch_bo buffer object is reallocated on enter VT, so we need to + unref it on leave vt. + + Signed-off-by: Lukas Hejtmanek + +commit 67fef27f4b76490be085d232aba0ca9cbb3c5e59 +Author: Xiang, Haihao +Date: Fri Mar 6 09:40:07 2009 +0800 + + Xv: free tearing on textured video + + Add an Xv attribute XV_SYNC_TO_VBLANK which has three values -1(auto), 0(off) + and 1(on) to control whether textured adapter synchronizes the screen + update to the vblank. The default value is -1(auto). + +commit 0d20bbbc2005a51f427a9ae6b6a66dbbb101dbab +Author: Zhenyu Wang +Date: Thu Feb 19 14:24:24 2009 +0800 + + SDVO: handle multifunction encoder (try 2) + + For SDVO encoder that advertise multiple functions, + we have to get attached display to determine current + output, and update output's name according with + current type. + +commit d4c64f01b9429a8fb314e43f40d1f02bb8aab30f +Author: Lukas Hejtmanek +Date: Wed Mar 4 17:33:27 2009 -0500 + + Fix serious memory leak at Enter/LeaveVT + + This fixes huge memory leak at each VT switch (about 600 BOs + 6MB + of RSS of Xserver). + +commit 095a001f755201d3c19335b67a84c57b1d080a83 +Author: Kristian Høgsberg +Date: Wed Mar 4 17:10:24 2009 -0500 + + Use drmSetMaster() and drmDropMaster() in enter/leave VT + + This allows multiple X server to use DRI and makes it possible to run + multiple X servers under KMS. This requires a 2.6.29 kernel to work. + On older kernels it will just log a warning and DRI will fail to + initialize for the second X server. + +commit 14bb61e0c2e28725a2f6167d3263649bc845be18 +Author: Zhenyu Wang +Date: Mon Mar 2 16:55:45 2009 +0800 + + SDVO: only check digital monitor when EDID exists + +commit 42e34e90e2e4048b38481cab61cef46f932eada7 +Author: Zhenyu Wang +Date: Tue Mar 3 22:55:35 2009 +0800 + + TV: add property control for TV attributes + + This is based on Jesse's origin patch for bug #12763. + But export integer range to user instead of hardware float + point format, and fix different real format on 965G and 945G + for contrast and saturation. + +commit aa9da5e393c804019720503fe58bdd247fe1eabd +Author: Zhenyu Wang +Date: Tue Mar 3 20:26:19 2009 +0800 + + TV: add option to set TV connector type + + This can let user override non-stable driver TV load detect, + and set connector type manually, e.g for s-video to component + converter, this patch seems must needed to use HD modes. + +commit ab1ef05cc0fd5ba9768c26cc51bc2c7b52baa45f +Author: Zhenyu Wang +Date: Thu Feb 19 20:23:02 2009 +0800 + + TV: update output and crtc modes when TV format change (try 3) + + This is to fix bug #16566, change TV format will cause BadMatch + error when crtc config apply. Everytime when we change TV format, + we may generate a new list of modelines as TV clock changed. After + randr get info request, new modelines will be probed and randr output's + modes will be renewed too. But crtc's mode failed to be updated, + as it never can find a matching mode now within new modes list. + So get info will return an invalid crtc's mode, later set crtc + config will pass that info, and xserver catches a bad match. + + This patch trys to refresh output modes and setup crtc's mode + with new modelines in TV format change. So get info would be + sure to turn valid crtc mode that reference in current new modelines. + +commit a67a911a93ff3c0b3d2e6f6fb20c0787b9d4d41d +Author: Zhenyu Wang +Date: Thu Feb 19 01:00:33 2009 +0800 + + TV: sort input mode lines + +commit bd360e7517835626bee54bec968cdc78908c6545 +Author: Adam Jackson +Date: Mon Mar 2 10:33:35 2009 -0500 + + KMS: Wire up output DPMS. + +commit 2d0aa553609a0e64fa4b2e755b9b1e244e5c3fa1 +Author: Zhenyu Wang +Date: Mon Mar 2 15:26:44 2009 +0800 + + Skip LVDS config parsing on pre-9xx chips. + + 855GM laptops seems pretty broken when parsing this block. + +commit 55359ef9ab0a2be42a55e0279835f76a191d6c74 +Author: Zhenyu Wang +Date: Fri Feb 27 09:02:30 2009 +0800 + + Update driver feature block definition for missed fields + +commit 38a7683561cee7fffab174c2a166bfd51b51ba27 +Author: Eric Anholt +Date: Fri Feb 27 22:55:44 2009 -0800 + + warnings cleanup + +commit 5bfd73cd31ba197a62f549cdbad1a1270b571027 +Author: Eric Anholt +Date: Fri Feb 27 19:09:49 2009 -0800 + + Only allocate pixmaps aligned for tiling when requested by DRI2 GetBuffers. + + This saves massive quantities of memory on pre-965 since the DRI2 tiling + enable caused the minimum size of any pixmap to be 1MB. + +commit f53bdad1412f841075232455837578f00709c6ef +Author: Shaohua Li +Date: Mon Feb 23 15:19:23 2009 +0800 + + Intel video driver patch + + This is the intel video driver patch for a new chip, which is G33-like + and has some clocking setting related register changes. This patch adds + the pci id and DPLx/FPx register changes. + + The gtt tool should just work to me, as the chip hasn't any changes + against G33 on this side. + + Signed-off-by: Shaohua Li + Signed-off-by: Eric Anholt + +commit 22dc9a5580d77cc4707bfb8e19474e611a06ae9a +Author: Eric Anholt +Date: Tue Feb 24 18:22:20 2009 -0800 + + Fix UXA for server 1.4. + +commit cb1f7ec0876746c1b52b63cdb508544e9e4e32e3 +Author: Eric Anholt +Date: Tue Feb 24 21:23:59 2009 -0800 + + uxa: Fix composite fallback debug printing of main memory versus bo info. + + It was just printing whether it was a pixmap (it is), instead of whether the + pixmap was offscreen. + +commit 635eaa511f28fb673fe306e46ed5370e78a8a534 +Author: Eric Anholt +Date: Tue Feb 24 21:48:11 2009 -0800 + + Regard the screen pixmap as suitable for acceleration. + + With UXA on the fake bufmgr, the screen pixmap doesn't have a BO and so + no acceleration was occurring. + +commit 70e0261208654c6c875ad462da2734c6aa9eeb96 +Author: Eric Anholt +Date: Tue Feb 24 20:54:05 2009 -0800 + + Disable fb resizing for DRI1-only server so that DRI1 can initialize. + +commit d7aa330db31100b7cb54d8165f9a4b94329ece32 +Author: Eric Anholt +Date: Tue Feb 24 20:34:10 2009 -0800 + + Fix up i915 composite and common solid/copy code to use check_aperture. + + This could fix complaints about binding BOs and resulting failure to render. + +commit a625a07022ea7f6757b288fcc2ffb9e27c7f8341 +Author: Xiang, Haihao +Date: Wed Feb 25 16:48:22 2009 +0800 + + XvMC: fix broken xvmc on 965 + +commit f6d8ae69b0f97e696c142f06c8038f336ed024f9 +Author: Zhenyu Wang +Date: Wed Feb 25 09:57:00 2009 +0800 + + Use LVDS config in Driver feature BDB for integrated LVDS check + + The LVDS config bits in VBT driver feature block is used by vendor + to identify the board implement of integrated LVDS/eDP or SDVO LVDS. + And video bios uses these bits for LVDS enabling or not. So check + these bits for integrated LVDS might eliminate more quirks. + +commit 8718551f14e064b461e80a583597f0ea9fb8ca9f +Author: Zhenyu Wang +Date: Wed Feb 25 09:54:03 2009 +0800 + + Update LVDS config bits definition in driver feature block + + ALL_LVDS is actually not defined before and include GM45. + Embedded DP bit will be used for newer chips. + +commit 9d8e5c21a1688b915bf39261d4c3b0bf2906daef +Author: Eric Anholt +Date: Tue Feb 24 14:05:15 2009 -0800 + + Fix distcheck from drmmode_display.h deletion. + +commit f4e2f522a5c5b03ea530b9eb67e9d1a9a96274ce +Author: Eric Anholt +Date: Sat Feb 21 20:36:58 2009 -0800 + + Don't do AdjustFrame in KMS mode. + + This was hit by xv86vm's SwitchMode path, and for that the CRTC offsets + get set at mode setting time anyway. + +commit 170f00e161931fdaa8c2812fc710649e1d6d977a +Author: Kristian Høgsberg +Date: Tue Feb 24 14:07:23 2009 -0500 + + Remove a handful of unused variable warnings. + +commit a6b31f38ebf470c61de0e10b0ce2af0d7ee1684b +Author: Kristian Høgsberg +Date: Tue Feb 24 13:58:20 2009 -0500 + + Update kms to work with drmModeModeInfo API update. + +commit 13ee9402e9822d6f57e3ebcc5ae658ce8322118e +Author: Adam Jackson +Date: Mon Feb 23 15:44:26 2009 -0500 + + Limit CRT DAC speed better. + + Verified against the public docs for i8xx parts, although not 9xx yet. + +commit 668b2352a47bcfba75fe0492a5805726222755eb +Author: Keith Packard +Date: Mon Feb 23 13:31:51 2009 -0800 + + Revert "Limit CRT DAC speed better." + + This reverts commit 8fd0e46571c7ba15c05f0a759113f8ca842c76a2. + + This doesn't even build. Please try again. + +commit 8fd0e46571c7ba15c05f0a759113f8ca842c76a2 +Author: Adam Jackson +Date: Mon Feb 23 15:44:26 2009 -0500 + + Limit CRT DAC speed better. + + Verified against the public docs for i8xx parts, although not 9xx yet. + +commit 73bc7f113969834d00cd92be8374dbadc62f96a9 +Author: Kristian Høgsberg +Date: Mon Feb 23 15:16:51 2009 -0500 + + KMS: Fix bug that prevented EDID data from getting propagated. + +commit ef952760551ad15cb9f63025d1e087645949a227 +Author: Kristian Høgsberg +Date: Sun Feb 15 22:10:42 2009 -0500 + + Use stat() and the dev_t to find the drm device filename. + + Simpler and more robust. Works when we haven't set the device PCI ID, + ie when not going through the legacy DRI module. + +commit 81c652e9a666a7459bcc5217c8a5ec518b6e00da +Author: Helge Bahmann +Date: Sat Feb 21 10:10:04 2009 -0800 + + Move disable_render_standby to EnterVT instead of startup. + + Otherwise, with a pre-2.6.28 older kernel the disable would be lost at + resume time and cause hangs. + + Bug #20214 + +commit 0621ba12a3b694720e67a49b25ca52f0e09b3802 +Author: Eric Anholt +Date: Wed Feb 18 13:32:44 2009 -0800 + + uxa: Ask for BOs ready for rendering for pixmaps. + + The assumption is that we're almost always accelerating our drawing to + new pixmaps (fill, copy, etc.). + +commit 5018d0f16cb8b44c743b5b37d194fe806d955568 +Author: Kristian Høgsberg +Date: Fri Feb 20 15:34:29 2009 -0500 + + KMS: Hook up rotated shadow buffers. + +commit beca598bc2848093b710bd47828d622205d273df +Author: Kristian Høgsberg +Date: Fri Feb 20 11:08:51 2009 -0500 + + Access the Xv buffer through the GTT for the non-KMS case. + +commit e97e2571703e3d6188bf18f211b793fc50383f9c +Author: Kristian Høgsberg +Date: Thu Feb 19 16:41:49 2009 -0500 + + Fix i915 textured video to work with the i830_memory -> bo change. + + Forgot to update i915_video.c in 872aadc7102bd5131e1582ede081e22672911ba2. + +commit 96da26b6813a8c1da8a43036c375aa0d2bb70f16 +Author: Kristian Høgsberg +Date: Thu Feb 19 16:40:19 2009 -0500 + + Dont allocate overlay registers in KMS mode. + +commit 872aadc7102bd5131e1582ede081e22672911ba2 +Author: Kristian Høgsberg +Date: Wed Feb 18 17:26:06 2009 -0500 + + Make Xv used a buffer object instead of i830_memory. + + We still pin the buffer object in case of overlay, but for textured video + we're now no longer using i830_memory for Xv anymore. + +commit 527e8177cde3abbabbcdccee0dbc0dcc0068a1be +Author: Zhenyu Wang +Date: Wed Feb 18 11:26:58 2009 +0800 + + bios_reader: parse driver feature BDB + +commit 62ca1c479825ffa0e9cf444b4e25080150faa45b +Author: Zhenyu Wang +Date: Wed Feb 18 10:49:00 2009 +0800 + + Fix SDVO mulitiplier setting for 945G + + Wrong SDVO multiplier setup has been slipped + in SDVO TV patch. Thanks Michael Fu to point this out! + +commit 723b6065093adb56a2d7204bd990ceae41bfafc9 +Author: Kristian Høgsberg +Date: Tue Feb 17 13:48:04 2009 -0500 + + KMS: Hook up crtc::gamma_set. + +commit 506bbb8341c052499057834a669b82787454b426 +Author: Zhenyu Wang +Date: Mon Feb 16 14:09:49 2009 +0800 + + Safely init SDVO found variable + + Found by Michael Fu for my last SDVO detect fix. + +commit 9d464bd5b0d2724f5edb26e859888ceb6a248f9b +Author: Zhenyu Wang +Date: Fri Feb 13 11:15:48 2009 +0800 + + Fix SDVO/HDMI detect + + SDVOC detect bit is only valid for HDMIC. + And for SDVO devices, SDVOB detect bit should be used + to probe all possible SDVO outputs. + +commit 48445d2e939328495b4abe0fb7e579dfcef727bb +Author: Zhenyu Wang +Date: Fri Feb 13 11:11:18 2009 +0800 + + SDVO: remove ForceSDVODetect option + + Which is just a hack to hide our SDVO detect drawback, + we will have SDVO/HDMI detect fix later. + +commit ddedf19f889da2ce6d69a3afce4665e2245682fa +Author: Zhenyu Wang +Date: Fri Feb 13 10:09:42 2009 +0800 + + SDVO: Switch control bus only before DDC access + + Instead of set control bus switch before every i2c start, + just set once before doing DDC. This should eliminate some + encoders returning error during that. + +commit f1ca56e17d0ecd4f1299061a6b3272bfd289e123 +Author: Zhenyu Wang +Date: Fri Feb 13 10:02:02 2009 +0800 + + SDVO: Fix TV support + + As SDVO TV uses SDVO_TVClkIn from SDVO encoder for clock reference, + it needs to generate proper PLL for current input clock. This uses + fixed PLL table from vbios for this. And possible sdvo mulitiplier + has to be setup correctly. This makes TV output stable on my 945GCLF2 + board with NTSC-M format. + +commit acde0ef683d6ec33d0b478923ffb11bd6785798f +Author: Zhenyu Wang +Date: Fri Feb 13 09:53:57 2009 +0800 + + SDVO: fix CREATE_PREFERRED_INPUT_TIMING command + +commit 824b2f0c5530c3196901c961757e6677b042caf3 +Author: Zhenyu Wang +Date: Fri Feb 13 09:50:45 2009 +0800 + + SDVO: fix usage for SET_TV_FORMAT and GET_SDTV_RESOLUTION_SUPPORT command + + They both needs parameters. + +commit 62c0c2f5549a51c5df209f7353a19ca301f221be +Author: Zhenyu Wang +Date: Fri Feb 13 09:48:34 2009 +0800 + + SDVO: fix error in modeline and DTD convert + +commit 37c67088a887e6380571e6eec8a8f058e3e24717 +Author: Zhenyu Wang +Date: Wed Feb 11 15:15:27 2009 +0800 + + SDVO: check EDID info for DVI-I + + For SDVO DVI-I, check EDID info for digital output, + otherwise mark it to be disconnected as analog output + is driven by VGA then. + +commit 38079bc0f1038da77048bbf6e5c10758f9fb8a55 +Author: Zhenyu Wang +Date: Wed Feb 11 14:41:58 2009 +0800 + + SDVO: Fix for HDMI encode and audio setup (try 5) + + SDVO HDMI encode and audio is not setup in detect, + which fails in hotplug case for HDMI audio. Fix to + check current encode type and set flag for HDMI audio + enabling. + + Check and set HDMI encode state in get_modes. + +commit 3012d85cc5eb58c2447e93c05c39dc14feaae988 +Author: Eric Anholt +Date: Tue Feb 10 18:47:28 2009 -0800 + + uxa: Fix breakage from UXA_FALLBACK conversion from "do {} while (0)" construct. + + Thanks to keithp for post-commit review. + +commit 5009127de7d9527ae329d1c2fbc7283648bde2e6 +Author: Eric Anholt +Date: Tue Feb 10 18:23:35 2009 -0800 + + uxa: Fix driver against fbDoCopy -> miDoCopy change in the server. + +commit b53977f4c53c7c8f562f909e985b8d5a7b2526f3 +Author: Eric Anholt +Date: Tue Feb 10 18:22:46 2009 -0800 + + uxa: Fix failure to --amend in further changes in previous commit. + +commit 5212ec6515c6562f66b86fc16928b601bf04e49b +Author: Eric Anholt +Date: Tue Feb 10 15:35:20 2009 -0800 + + uxa: hook up the fallback debug to the driver's fallback debug option. + +commit 3aa8591abfbe8db0f13912910c850fdd748808df +Author: Ma Ling +Date: Fri Feb 6 09:14:15 2009 +0800 + + Don't disable vga centering bit. + + commit id b9f5915ce812144ffd9d2aa42e8ba856129c35e, + which resolved bug #17235, but generate new regression-bug #19715. + This patch intends to resolve bug #17235, and avoid regression as well. + We have successfully re-tested it for bug #17235 and #19715 respectively. + +commit 9fe5fca3fe761a4f11857d9766138a60f471a9e6 +Author: Zhenyu Wang +Date: Wed Feb 4 06:00:39 2009 +0800 + + TV quirk for HP Compaq nx6310 + +commit 5c370091620b38447172ebeffbc6ed3256e86c9d +Author: Kristian Høgsberg +Date: Mon Feb 2 12:02:00 2009 -0500 + + Fix front buffer memset() for non-KMS case. + + Missed the pI830->FbBase condition when removing the KMS hook. + +commit 2013799b20599a58de48cb21a5a389e898a58af1 +Author: Kristian Høgsberg +Date: Mon Feb 2 11:51:47 2009 -0500 + + Un-revert the I915_SETPARAM_NUM_USED_FENCES commit reverted by accident. + + Oops, my bad. Reverted 8d4bc36fae50b09a73ba2cfab920adb32141a358 + since my kernel doesn't yet have the new param, committed + the revert by accident. + +commit 127330bfd53ac7571bdd12a551142528b972893f +Author: Kristian Høgsberg +Date: Mon Feb 2 11:02:59 2009 -0500 + + Fix last-minute "cleanup" that broke the patch. + +commit 0cb87ccfe97b0e016e47dcf236fd5ce78dddfc4b +Author: Kristian Høgsberg +Date: Fri Jan 30 17:53:03 2009 -0500 + + Implement front buffer resize for KMS. + + This adds back the resize hook so we can resize the front buffer under + kernel mode setting as well. + + The patch also pulls the drmmode_* structs from drmmode_display.h into + drmmode_display.c and eliminates the header file. + +commit 66bc44e8f9a0505c0b11b8042243ca74079da85f +Author: Eric Anholt +Date: Tue Jan 27 15:43:58 2009 -0800 + + dri2: Use modesetting's master fd instead of opening our own non-master. + + This fixes failure to auth DRI2 clients under KMS. + +commit 8d4bc36fae50b09a73ba2cfab920adb32141a358 +Author: Jesse Barnes +Date: Mon Jan 26 17:14:06 2009 -0800 + + Support tiled back/depth on 915-class hardware with DRI2. + + Set alignments, tile settings and flags correctly in the 2D driver to support + tiled rendering. UXA's create pixmap function currently assumes the worst + about the alignment constraints; that should probably be fixed. Some of the + 1M alignment fixes could probably be done more cleanly as well. + +commit 6c0ca1676bf60529dd331cc739abdf68fa9e918d +Author: Eric Anholt +Date: Wed Jan 21 15:52:02 2009 -0800 + + Don't forget the new state bos in check_aperture. + + They're tiny so it shouldn't have been a problem, but play it safe. This is + another <5% loss on top of the previously reported value, bringing the whole + series to about 8%. + +commit 57a02b50c60c10a25ff0f3cd93af9f37fa0d1b11 +Author: Jesse Barnes +Date: Mon Jan 26 14:58:28 2009 -0800 + + Fixup bogus VBT modes when detected + + Several VBT modes out in the wild have H or VSyncEnd values greater than + the H or VTotal value. This clearly ends up creating a bad mode, + causing some panels to either ignore the timing or display some sort of + corrupt image. + + Check for these cases and fix them up by default, making things work for + several Dell and Sony machines. + + Fixes FDO bug #17292. + +commit e20e1cf76fb00ba4f933a1ed6d1a4896be346c91 +Author: Bill Nottingham +Date: Sat Jan 24 08:36:20 2009 +0800 + + Quirk MSI IM-945GSE-A LVDS, TV outputs. + + The IM-945GSE-A claims to have a TV output, and always claims a connected + LVDS output. It has neither. + +commit 05ff561234cc2b93fe1ea2a35041fa2e119a7e38 +Author: Vincent Mussard +Date: Sat Jan 24 08:33:16 2009 +0800 + + quirk for AOpen MP45 + +commit fbf003ef2767a1a9f5e4064f04a17992030d8f5c +Author: Eric Anholt +Date: Fri Dec 5 17:27:13 2008 -0800 + + Move i965 render sampler state to BOs. + + This eliminates the pinned memory allocation for 965 render state. + +commit befd4ad8beae39377f804e06c7cbd926ec4251db +Author: Eric Anholt +Date: Tue Jan 20 14:43:08 2009 -0800 + + Move i965 render kernels to BOs. + +commit 5d705de5d11297f4d6bd5237fb67619e703745bc +Author: Eric Anholt +Date: Fri Dec 5 15:30:35 2008 -0800 + + Move 965 render unit state to BOs. + + This is a first step in a series of changes to avoid requiring a pinned object, + which gets in the way of doing non-root KMS. This change appears to result in + about a 2-6% loss in x11perf -aa10text, which better algorithms in libdrm could + make up for (it hasn't really had to deal with code this bad before). + +commit 64b08ed5ad46ccd76964972e39bfed8721a920aa +Author: Eric Anholt +Date: Tue Jan 20 17:13:52 2009 -0800 + + Remove 965 render wm scratch space, which was just unused. + +commit f126aabdf8952177bb15f392041da7a7094eb31b +Author: Eric Anholt +Date: Wed Jan 21 12:52:36 2009 -0800 + + Fix build with server 1.4. + + Debian "unstable" is still stuck with this ancient version. + +commit 253b8db298f38676e47dc902534465054f7b58b8 +Author: Jesse Barnes +Date: Wed Jan 21 09:02:13 2009 -0800 + + Don't run in KD_TEXT mode even with KMS + + Leaving the VT in KD_TEXT mode keeps the kernel's blanking code active, + so when a DPMS event happens, the fb console is restored rather than X's + configuration. On the downside it means the kernel won't print messages + in the background, which would be visible if a panic or emergency switch + occurred. The proper fix here is a new kernel mode, which we can move + to when ready. + +commit 131b414feb2ecabe31b538d65725ac4427a4387a +Author: Jesse Barnes +Date: Wed Jan 21 09:01:05 2009 -0800 + + Tear down batchbuffers unconditionally on LeaveVT + + Even if KMS is enabled we should do this, to avoid running batches that + depend on other state we tear down in LeaveVT. + +commit b6f3ce32e295929f461a7bc37e61f126fb51e4aa +Author: Eric Anholt +Date: Tue Jan 20 10:45:23 2009 -0800 + + Use drm_intel_bo_subdata to put render vb data in. + + This improves performance by avoiding repeated map/unmap cycles, which are + a bit expensive on my machine with lock debugging on in the kernel. It could + do much better if we did more than 18 or so floats at a time. + +commit 9a8bbb1951ad0ca0a9407a97348fc7fa03127900 +Author: Eric Anholt +Date: Mon Jan 19 19:34:50 2009 -0800 + + Move i965 render vb setup to use time, and decouple state emit from it. + + The require_space had failed since it only checked for the space required + by the batch emits in the function itself, but not in the + i965_emit_composite_state() that it called (the state we were concerned about + having set up for that 12 * 4 dwords to follow!). This is replaced by + intel_batch_start_atomic(), which will catch such mistakes in the future. + +commit 3d739597c4f5817079efd9067ad5db2f4105f765 +Author: Eric Anholt +Date: Tue Jan 20 10:37:20 2009 -0800 + + Move i965 render transform setup from emit_composite_state to prepare_composite. + +commit e20f7278f3abb44a3a151ac91f83c45cf1a2745a +Author: Eric Anholt +Date: Mon Jan 19 20:31:31 2009 -0800 + + i965: Pull check_aperture out to a separate function and make it dtrt. + + Previously it wouldn't count the pixmaps that were about to be used, which + is pretty much the only purpose of having the pain around. This also + eliminates the check_twice confusion with emit_batch_header_for_composite(). + +commit 013e2adfbf955cb21450b610091542ebd54392c2 +Author: Eric Anholt +Date: Mon Jan 19 20:24:20 2009 -0800 + + Move filter computation from emit_batch_header to prepare_composite. + +commit a340fe5e4227ebea5493e658eb6289624b07ab0b +Author: Eric Anholt +Date: Mon Jan 19 19:11:41 2009 -0800 + + Use intel_emit_reloc from video to prettify 965 render bind_bo setup. + +commit aefe198ca427a5ad69717f49948eb3ede713bb28 +Author: Eric Anholt +Date: Mon Jan 19 18:57:01 2009 -0800 + + Move i965 render state bo setup back to prepare_composite. + + We want the objects to be created once per prepare/done both for efficiency and + so we can handle aperture checking better. + +commit 946c7ef8170e74ac178c83b1465242d57fa86f2e +Author: Eric Anholt +Date: Mon Jan 19 14:43:20 2009 -0800 + + Do check_aperture_space and batch_start_atomic for i965 video. + + This increases the overhead for video in the presence of cliprects, but we + were already doing nasty things in that case and don't seem to care. This + could fix potential bad rendering or hangs with video, particularly with + DRI2. + +commit 7be668179a12918918cad863f6936ced4ab78dbf +Author: Eric Anholt +Date: Mon Jan 19 14:29:25 2009 -0800 + + Move 965 video setup to a separate function so we can move it around. + +commit c7db3201106f07f3228c989014d6db5ace5378f6 +Author: Owain G. Ainsworth +Date: Tue Jan 13 18:46:41 2009 +0000 + + Remove the pageflipping infrastructure. + + It was broken on current kernels, and deprecated anyway. + +commit c82adfd0169317efb6c2f9de0f315651f9adbae1 +Author: Owain G. Ainsworth +Date: Tue Jan 13 17:09:00 2009 +0000 + + Remove triple-buffering support + + It never worked with any upstream linux kernel, and is quite heavily + deprecated. A new solution based around DRI2 will probably be + forthcoming. Pageflipping itself is next. + +commit ada44c1c0edcd3ea9e41ed6b6fdb2bf0e87c9c67 +Author: Kshitij Kulshreshtha +Date: Tue Jan 20 11:35:36 2009 +0800 + + Support sysfs backlight control for Sony laptops in xf86-video-intel + + The sony_laptop kernel module (since v2.6.23) supports backlight control + via the sysfs interface: + /sys/class/backlight/sony + + This patch will enable xf86-video-intel to use this backlight control method + for Sony VAIO Laptops with Intel integrated video. + +commit d89de6d60a86105a198d904821853e6ed7de3305 +Author: Eric Anholt +Date: Fri Jan 16 16:59:17 2009 -0800 + + Protect i915 textured video against batchbuffer wrapping. + +commit 15780c53f5717936ea10ac87aff8a881c172f1dc +Author: Eric Anholt +Date: Sat Jan 17 16:23:38 2009 -0800 + + Fix i915 batch_start_atomic counting. + +commit fc46cb6403387215d13aa28d720f205688ae9d67 +Author: Eric Anholt +Date: Sat Jan 17 12:47:53 2009 -0800 + + Fix libdrm version number requirement regression that got spammed in. + +commit 1459f794e2a4b9032807c3794b00a33fa6392837 +Author: Dave Airlie +Date: Sat Jan 17 22:14:26 2009 +1000 + + intel: fix DRI2 should be DRI_DRI2 + +commit db43b7870a37ea273941302096a6f00120dfae71 +Author: Eric Anholt +Date: Thu Jan 15 19:05:52 2009 -0800 + + Re-emit i915 composite setup when the batchbuffer wraps. + + This also introduces tests to make sure that we asked for enough reserved space + and that we don't allow wrapping at the wrong time. + + This fixes a hang during text rendering with DRI2 and a GL client running, + but could potentially affect text rendering with GEM in general with an + exceptional batchbuffer setup. + +commit cab5b7a7b0e17414f98b2363b0961c87f32f9c05 +Author: Eric Anholt +Date: Thu Jan 15 09:31:55 2009 -0800 + + Fix invarient state emits for DRI2 (do it per batch, since there's no lock). + +commit 9f306193c4b128ec72c5b4db16d07302cee50ab5 +Author: Owain G. Ainsworth +Date: Tue Jan 13 18:42:44 2009 +0000 + + Fix ioctl type. + + I915_EMIT_IRQ is a read/write ioctl, not a write only. Found by OpenBSd's + kernel code which checks these things a long more strongly than Linux. + +commit 1e8588ad5087c69eb77399cfaab8e4ec15eb4da9 +Author: Owain G. Ainsworth +Date: Tue Jan 13 17:02:59 2009 +0000 + + use ifdef __linux__ where needed. + + since modesetting is compiled by default now, ifdef __linux__ the linux + only includes and ioctls. + +commit db9f5915ce812144ffd9d2aa42e8ba856129c35e +Author: Ma Ling +Date: Wed Jan 14 14:46:52 2009 +0800 + + Disable VGA plane reliably + + This fixes #17235, VGA random hang on recent G45/43 board. + From spec, SR01 bit 5 should be set before VGA plane disable through + control register, otherwise we might get random crash and lockups. + +commit a4b023c17b9c3bd65fb9466ddb8a953f60244402 +Author: Keith Packard +Date: Tue Jan 13 20:01:49 2009 -0800 + + Assign rotation memory dri_bo to rotation pixmap. + + As the rotation memory and rotation pixmap are allocated separately (to make + rotation at startup work), the allocate dri_bo needs to be set in the pixmap + for acceleration to work. This restores the performance in rotated modes. + + Signed-off-by: Keith Packard + +commit f659cc37e61364a408355b9a6a44d39f4d759935 +Author: Jesse Barnes +Date: Tue Jan 13 16:49:41 2009 -0800 + + bios_reader: make mode timing output friendlier + + Print out the calculated mode line values (as i830_bios.c uses) and + check for validity against known problems. + +commit c80f1a9c5131721eaf87d12a7a67e603cdfed63b +Author: Bernhard Rosenkraenzer +Date: Tue Jan 13 10:35:19 2009 -0800 + + UXA: Declare glyph cache picture as component-alpha when necessary. + + Without this, rendering component-alpha glyphs may break without a mask. + + Bug #19534. Ported from fix by Michel Dänzer in + xserver commit 639f289dcdbe00a516820f573c01a8339e120ed4 + +commit 3d206f9e46b5237bda7ca3c0f92d64c45ee8bdf5 +Author: Ma Ling +Date: Tue Jan 13 10:26:40 2009 +0800 + + set continuous-frequency flag in get modes function + + http://bugs.freedesktop.org/show_bug.cgi?id=19247 + Because latest xorg will check whether the display is continuous frequency through one flag in monitor info structure, + if not it doesn't touch default modes. When laptop failed to fetch edid, We don't set the flag. In i830_lvds.c, + so currently we can not get default modes except only one mode line from bios. + In order to achieve default modes from xserver successfully,I set the flag and other EDID features. + +commit 3354e660b0744976871683ce226f17e873f26b50 +Author: Keith Packard +Date: Wed Nov 26 16:32:12 2008 +0800 + + Fix LVDS EDID to match all possible default modes + + If the EDID data from the LVDS doesn't indicate support for a wide range of + continuous frequencies, it will not match any of the default modes although + our LVDS scaler logic ignores refresh rates when programming LVDS modes. Fix + this by smashing the compute EDID data to open up the sync rates. + + Signed-off-by: Keith Packard + +commit f1e9ca4e4fb3ddb083252aea79c67c5e5e71f29c +Author: Alan Coopersmith +Date: Fri Jan 9 16:30:15 2009 -0800 + + Remove xorgconfig & xorgcfg from See Also list in man page + +commit 91c49067abab262edce54d33af8bfc03eee20f2e +Author: Ian Romanick +Date: Wed Jan 7 21:45:54 2009 -0800 + + Prevent redefinitions of CARD8 and friends. Fixes build. + +commit 934008a2cbcec0c790580750c672c0367a9e4c55 +Author: Eric Anholt +Date: Tue Jan 6 10:55:59 2009 -0800 + + Always enable KMS if server's new enough, and remove option. + + The API should be stable at this point, and we don't want to allow mistakes. + +commit 342120be0956bfc12822d1ffbfbd8aaabf3e922f +Author: Eric Anholt +Date: Mon Jan 5 23:21:07 2009 -0800 + + Fix pin leakage with EXA GTT-mapping shortcut, and crash with UXA on KMS. + +commit 9a5082d2920c1a212fe935b5a093013e8035c321 +Author: Eric Anholt +Date: Mon Jan 5 23:28:50 2009 -0800 + + Disable DRI2 buffer tiling on non-965, as those need fence regs for 2D blits. + + This fixes glReadPixels failure on single-channel 915GM, as the software code + for readpixels was actually the only code in the driver doing tiling against + these buffers (everything else says "rely on fence registers", since the 2D + blits don't have a "don't rely on fence registers" option). + +commit 7736b65be4fb4d5c59d7aedb1e64da976bb10ae9 +Author: Keith Packard +Date: Mon Dec 15 15:49:01 2008 -0800 + + FatalError on batchbuffer map failure + + Yes, it would be nice to do something other than crash here. + + Signed-off-by: Keith Packard + +commit 632f816c72cb4b48b690fd92d1cc1d5a9c9285c7 +Author: Keith Packard +Date: Mon Dec 15 15:43:34 2008 -0800 + + uxa: handle uxa_prepare_access failure + + uxa_prepare_access may fail to map the pixmap into user space. Recover from + this without crashing. + + Signed-off-by: Keith Packard + +commit 90b28a56553d809374fa6d9b9529b7a8b583488c +Author: Keith Packard +Date: Mon Dec 15 15:41:28 2008 -0800 + + Handle drm_bo_map failure in 965 video and composite paths. + + These two paths allocate a number of objects directly. + + Signed-off-by: Keith Packard + +commit 8237faf8f3ca73ecdf0ef009a7d361b318726f6f +Author: Keith Packard +Date: Mon Dec 15 15:35:35 2008 -0800 + + Resize framebuffer on screen size change (requires UXA and DRI2) + + Signed-off-by: Keith Packard + +commit 21bd4e8974e4c0e83f5f95adb0fc17290444caf5 +Author: Keith Packard +Date: Mon Dec 15 15:19:00 2008 -0800 + + Make i830_allocate_memory take tiling parameters. + + This eliminates the separate i830_allocate_memory_tiled function which means + that all memory objects will have tiling parameters set correctly. + + Signed-off-by: Keith Packard + +commit 1f61e97904dfe5f8c08bb9f284cfdfe878f7e541 +Author: Zhenyu Wang +Date: Wed Dec 31 22:56:57 2008 +0800 + + UXA: Fallback to dri_bo_map() if pin failed + + This fixes VT switch issue with UXA after Eric's + aae4008096399a0e84abc7c016b35092caf9db25 on 2D side. + +commit 830bf916724afd21b7947f797c22a8c8aab7a0a4 +Author: Eric Anholt +Date: Mon Dec 29 13:42:44 2008 -0800 + + Don't touch the pipestat regs for detecting FIFO underrun. The kernel owns them. + + Since we don't perform any synchronization with the kernel on these regs, we + could race with the kernel to write stale values and end up not having vblank + interrupts enabled when somebody was waiting on one. + +commit d96f774d1bb39640486c72338fe8b19ee1ceaa23 +Author: Eric Anholt +Date: Mon Dec 29 13:57:24 2008 -0800 + + warning fix. + +commit 59b0fbb9be880d489374b141f818948a2721a2ef +Author: Henry unbongo +Date: Mon Dec 29 13:54:38 2008 -0800 + + Add support for SDVO LVDS. + +commit 750d8e105831718d4a44a145fdb87571fa9f9d8e +Author: Eric Anholt +Date: Mon Dec 29 12:44:26 2008 -0800 + + Fix compile failure after 45f45c73469f1bd46a1b6fb206f2e9e5e4fd66b3 + +commit 45f45c73469f1bd46a1b6fb206f2e9e5e4fd66b3 +Author: Eric Anholt +Date: Mon Dec 29 11:26:11 2008 -0800 + + Remove logical context setup. + + This should be a noop. If it wasn't a noop, it means that on pre-g33 chipsets + we were spamming some data into a page of system memory because we used a + virtual instead of a physical address. It was also supposed to not work when + we submit it from a batchbuffer, as we have been doing for some time now. + This code has existed since about the beginning of the driver's existence, + with no justification. + +commit 3544bbe22d8cf2640289e1e4febe755a47f26631 +Author: Eric Anholt +Date: Mon Dec 29 10:41:02 2008 -0800 + + Add PCI write posting to LeaveVT path when we're about to wait on write results. + +commit 7b67914b23b54d4d9566190440a3430e40615aa8 +Author: Eric Anholt +Date: Fri Mar 28 15:51:50 2008 -0700 + + Add SDVO LVDS register definitions. + +commit 8464fc285d7b22fd45b7af616fd52aa15e16638a +Author: Eric Anholt +Date: Mon Dec 29 09:51:45 2008 -0800 + + Rely on libdrm 2.4.3 and stop checking for xf86drmMode.h. + +commit c1dde7ac06ce6470c74198b2560ee67d28fb0aea +Author: Eric Anholt +Date: Mon Dec 22 16:49:57 2008 -0800 + + Remove old mergedfb includes and defines, which bother spatch. + +commit 75799d2834be84b016391ec95b221df32380e3e7 +Author: Zhenyu Wang +Date: Tue Dec 30 00:55:30 2008 +0800 + + Bug #18004: Add Aopen 915GM LVDS quirk + +commit cfaaf6af777ad8e56da5a077bdc01f4f2d7bc4d6 +Author: Zhenyu Wang +Date: Mon Dec 29 21:17:44 2008 +0800 + + Don't count vertex buffer in second aperture size check + + With batch flush notify vertex buffer will be unreferenced, + so don't count it in later aperture check. Also adding + uninitialized vertex buffer check in batch flush notify. + +commit b710a688a7383df320f9d4e765b48331310a4d1d +Author: Dave Airlie +Date: Mon Dec 29 12:50:25 2008 +1000 + + intel/kms: disable overlay when it needs physical address + + We can't do phy address allocations, need kernel support for this. + + Signed-off-by: Dave Airlie + +commit 649374b88b330838133d78be1953ce8b18ddd2c6 +Author: Dave Airlie +Date: Mon Dec 29 12:48:11 2008 +1000 + + intel: don't call enter/leave VT for KMS enabled systems + + Signed-off-by: Dave Airlie + +commit 408f7139354a942f29334795b5480a0b6bb6142a +Author: Dave Airlie +Date: Mon Dec 29 12:47:30 2008 +1000 + + exa: fix map gtt call to use current API + +commit fcd280b730f86ea54ecd89d3e037e71f8375b5f5 +Author: Zhenyu Wang +Date: Mon Dec 29 10:05:17 2008 +0800 + + Bug #19239: Add a quirk for broken ACPI lid state + + For broken hardware/bios with incorrect ACPI LID state, + there's machine that can not be fixed in ACPI way, customed + DSDT that reprogram _LID method to read EC state. Although + this is ACPI issue, this quirk can be used to work around that. + +commit 6b9f421b792c701e909d81ae2b6e6a47fb069b0b +Author: Dave Airlie +Date: Mon Dec 29 11:51:58 2008 +1000 + + modeset: transformPresent is a new API member + +commit a320541e51818833a6a445707835fbf70e9babd4 +Author: Dave Airlie +Date: Mon Dec 29 11:34:51 2008 +1000 + + modeset: fix xf86CrtcRotate API change across server versions + +commit e38fd84fcccc18284b649a60b4cfd8e24eaf059d +Author: Ma Ling +Date: Mon Dec 22 10:35:52 2008 +0800 + + SDVO: reset pixel repeat in avi frame + + For #19115, the root cause is avi_if.u.avi.PR in + i830_sdvo_set_avi_infoframe() belongs to element for + interlaced mode based on CEA_861B, but currently we + don't support interlaced mode. So it should be set as 0. + +commit d8e89b26ef5ef2c15e5d34162b14d279a7f0bb1c +Author: Zou Nan hai +Date: Fri Dec 19 09:34:14 2008 +0800 + + [965-xvmc] remove the vblank wait code, drm not support mutlple client + to wait on vblank now. + +commit aae4008096399a0e84abc7c016b35092caf9db25 +Author: Eric Anholt +Date: Wed Dec 17 14:25:22 2008 -0800 + + uxa: Do a hack to use the aperture mapping instead of bo_map in sw fallbacks. + + Because of how fallbacky the uxa rendering core is, and our inability (without + wfb in userland or page faulting in the kernel) to tell the kernel just where + we're going to fall back, the clflush overhead can become outrageous, for + example with emacs and xcompmgr. Instead of using drm_intel_bo_map, pin the + buffer and do the fallback to the aperture mapping. This gets us the bad old + performance that fb is designed for, instead of bad new performance. + +commit 74bc420940de4ed02705211ddebbc4033c032242 +Author: Peter Alfredsen +Date: Fri Dec 19 08:10:06 2008 +0800 + + xvmc: fix up needed libs + +commit 555eea5411cf8c725df5f1b4cb80198fa6a1225b +Author: Zou Nan hai +Date: Wed Dec 17 13:55:07 2008 +0800 + + wait vblank before render to fix tearing + +commit ed267072db7c58ee16a458fd3dc24ce3a2d0061d +Author: Robert Noland +Date: Wed Dec 17 09:27:30 2008 +0800 + + Fix drmOpen for non-linux 965 XvMC + + drmOpen by name only works on linux after falling back to groping around + in /proc. This doesn't work on other OS. + + Signed-off-by: Robert Noland + +commit ecdd706873c1f990f4a78fbaecf7380411edabcd +Author: Eric Anholt +Date: Sun Dec 14 16:09:25 2008 -0800 + + uxa: Correctly prepare/finishaccess of stipple in ValidateGC (and only it) + + This avoids prepare/finish_access_gc overhead when we're not changing things + (since GCTile is already handled) and get us the RW flag for the prepare on + of the stipple pixmap so thing will be synced correctly. + +commit e6479f96e5d8da39fcbb5376c4a66a1f924ec4e4 +Author: Kristian Høgsberg +Date: Mon Dec 15 14:54:20 2008 -0500 + + Quiet some KMS warnings. + +commit 30fb0ef53e19b759715f1ee14b81b11c81d79045 +Author: Zhenyu Wang +Date: Tue Dec 16 00:39:45 2008 +0800 + + Revert " [965 xvmc] update dual prime g4b files" + + This reverts commit ea2b6b405e4c8b1bfb4bc568d0453a39a9194a8f. + + Duplicate with Keith's commit. No idea what's diff target + of this one. + +commit ea2b6b405e4c8b1bfb4bc568d0453a39a9194a8f +Author: Zou Nan hai +Date: Mon Dec 15 09:19:43 2008 +0800 + + [965 xvmc] update dual prime g4b files + +commit d917583c19e2eb20a559eddaa100ce71d8fbe48c +Author: Pierre Willenbrock +Date: Mon Dec 15 09:08:30 2008 +0800 + + closedir only after finishing use of any results from readdir + +commit 865735d8408ee6b75be8fb1a8ab32b2a53dd3adb +Author: Keith Packard +Date: Fri Dec 12 11:07:20 2008 -0800 + + Dump out fence registers by default, add fence end registers as well + + In debugging the frame buffer resize code, I needed to see what the server + was doing to the fence registers, so I added this debug code. Seems useful + enough to include it. + + Signed-off-by: Keith Packard + +commit f3e59e59b54696667b127c82327e16b14d7bab22 +Author: Zou Nan hai +Date: Fri Dec 12 11:18:25 2008 -0800 + + Update binary versions of the dual-prime kernels + + Signed-off-by: Keith Packard + +commit 80d588e9c49719ec494e705edfc14c78908bbc3f +Author: Zhenyu Wang +Date: Fri Dec 12 18:27:29 2008 +0800 + + Don't warn on ring enabled in GEM + +commit 60c4ee9ece8ea57e61b1590dfeb69d08555e465c +Author: Zhenyu Wang +Date: Fri Dec 12 18:00:09 2008 +0800 + + Fix directRenderingType check + + Don't miss classic texture memory allocation in DRI. + +commit edf765155497d89ecac328a5b268ecf60e2f377c +Author: Zou Nan hai +Date: Thu Dec 11 15:41:59 2008 +0800 + + [965-xvmc] fix dual prime kernel, flush issue on G4x + +commit 80e2d90139dd99f50beb4f9353599608624b777d +Author: Zhenyu Wang +Date: Thu Dec 11 13:45:17 2008 +0800 + + Let lid status be unknown if no acpi lid object found + +commit 83377b543defdca7226d7c1a7794e4ff3d8b4c84 +Author: Bryce Harrington +Date: Thu Dec 11 09:38:27 2008 +0800 + + Pipe-A quirk for HP 2730p (bug #18852) + +commit 6c4e134a1a30785c2e5c6d57b21fde54a2dd3413 +Author: Bryce Harrington +Date: Thu Dec 11 09:34:15 2008 +0800 + + PipeA quirk for Quanta/W251U (launchpad bug #244242) + +commit 1e974ff6b8446ecd64677b3c9aba60ca850923cc +Author: Zhenyu Wang +Date: Wed Dec 10 10:54:31 2008 +0800 + + Try to always probe SDVOC on 965G/965GM + + Detect bit of SDVOC is reserved on 965G/965GM, instead of ignore SDVOC + this trys to always probe it on these chipsets. + +commit f5f67e1b54e67b4bfc3db3482b2693211be81d63 +Author: Zhenyu Wang +Date: Wed Dec 10 10:36:07 2008 +0800 + + bug #17395: Quirk CRT for Sony VGC-LT71DB + +commit d8b764fbd27dc9c8b28386093931b8d38855bd19 +Author: Keith Packard +Date: Tue Dec 9 21:51:14 2008 -0800 + + Add RandR 1.3 panning support by supporting the crtc set_origin function + + RandR 1.3 panning support can use the regular mode setting interface, but + that's really slow. Providing set_origin makes it nice and snappy. + + Signed-off-by: Keith Packard + +commit 4d7a95959d8223aec41550eb19f60b3edd7210a1 +Author: Zhenyu Wang +Date: Tue Dec 9 19:48:11 2008 +0800 + + Try to add LVDS detect support + + This one trys to use lid status for LVDS detect, + which works when internal panel is not used as primary + display alone, or there's no internal panel at all. + ACPI button driver's lid state interface is preferred, + and SWF state is also checked if ACPI method failed. + +commit 0fe61b0b7e3bbe8ced1b0ad2be72c438d200c64b +Author: Zhenyu Wang +Date: Tue Dec 9 19:19:58 2008 +0800 + + Remove Cappuccino SlimPRO SP625F 855GM LVDS quirk + + It breaks bug #18462 on IBM 855GM with same subdevice ids. + +commit bea98cdfd93fc1181a06c51e57fcab227ff4827e +Author: Carl Worth +Date: Fri Dec 5 15:42:53 2008 -0800 + + Set vertex_buffer_bo to NULL after unreference. + + Which is just being tidy. We initially were looking at this code + path due to a report of a crash on server shutdown which started + after this unreference call was added. Setting this to NULL + apparently didn't avoid the crash, but it's a good thing to do + regardless. + +commit ce7efc2e3676c8f80206415480dda91e5e021396 +Author: Carl Worth +Date: Thu Dec 4 11:41:02 2008 -0800 + + Don't smash fixed_mode if skip_panel_detect is set. + + Without this change, setting LVDSFixedMode to false is not effective + as i830_bios_init calls i830_parse_panel_data which in turns sets + a fixed_mode. To fix this we still call parse_panel_data to set + the various lvds_options but we return before setting fixed_mode. + +commit e8b95efbf5d9c3a5b75b2bb8b5b51844b5fcdfbc +Author: Carl Worth +Date: Wed Dec 3 13:49:52 2008 -0800 + + i965: Add batch_flush_notify hook to create new vertex-buffer bo + + This avoids mapping a buffer object which is being referenced + by a batch that has already been flushed, (which is a terribly + expensive operation). + + On my machine this brings the performance of x11perf -aa10text + from 85k back to 150k, (where it was before a recent kernel + upgrade). Also, before this patch, when I used my X server + actively performance would drop as low as 15k---hopefully that + bug is gone with this change. + +commit 768f317cf0da4cd6682af2e71e71c3e130e05182 +Author: Zhenyu Wang +Date: Mon Dec 8 10:33:13 2008 +0800 + + Fix DRI2 compiling warning + +commit 95596f51503bb468364719aec9083d59999e34b7 +Author: Zhenyu Wang +Date: Mon Dec 8 10:30:12 2008 +0800 + + Fix TV compiling warning + +commit c47b6d1def917fad5ad2b5a3e4167edfd354f2c8 +Author: Kristian Høgsberg +Date: Sat Dec 6 21:20:52 2008 -0500 + + Make sure DRI/DRI2 can initialize properly with KMS. + +commit 70af658d4e94cc372f9e9c831611f70b3c1cecab +Author: Kristian Høgsberg +Date: Sat Dec 6 19:19:21 2008 -0500 + + Simplify crtc preinit a bit. + +commit 3ad9c9a82d7b359b9b711070628e6ff07a2aa9f7 +Author: Kristian Høgsberg +Date: Sat Dec 6 19:17:39 2008 -0500 + + Fix KMS compilation. + +commit 2e3c098c5ed9a8451713dc754a5f086992249336 +Author: Eric Anholt +Date: Fri Dec 5 12:21:53 2008 -0800 + + uxa: Reject solid/copy to under-8bpp destinations. + + EXA wouldn't create pixmaps for under-8bpp, but UXA does. Fixes + mis-rendering in xfwm, evolution message compose, firefox link + drag'n'drop, and I'm sure more. Big thanks to Pierre Willenbrock for + debugging the issue! + + Bug #18050 + +commit 261c20a479f6ec1e94c2ba801323072227cc3ade +Author: Eric Anholt +Date: Fri Dec 5 12:13:26 2008 -0800 + + uxa: Add in EnableDisableFBAccess handling like examodule.c did. + + This fixes assertion failures when rendering text while VT switched. + +commit caecd6031e416705b1f0a7051535211feaebdedd +Author: Eric Anholt +Date: Thu Dec 4 15:18:08 2008 -0800 + + Remove the extra memory allocation for 965 video state now that it's all in BOs. + +commit 48c113ade26d5ad64999cd5cc288495c10e02fc4 +Author: Eric Anholt +Date: Thu Dec 4 15:10:49 2008 -0800 + + Emit proper relocations to pixmaps in BOs in i965 video. + +commit ae2cd8b75e41393e072e27064ecefecf1aa1bc6c +Author: Eric Anholt +Date: Thu Dec 4 15:02:12 2008 -0800 + + Move i965 video surface state and binding table to BOs. + +commit 1b3c3c9d79305abe1785fdaef26a950dafa8890f +Author: Eric Anholt +Date: Thu Dec 4 14:30:56 2008 -0800 + + Move i965 video vertex data to BOs. + + This eliminates extra syncing when clipping is involved. + +commit 84825972597042f0aa6784594dace96be96a0234 +Author: Eric Anholt +Date: Thu Dec 4 14:26:09 2008 -0800 + + Move remaining i965 video programs to BOs. + +commit 40671132cb3732728703c6444f4577467fa9223f +Author: Eric Anholt +Date: Thu Dec 4 14:20:21 2008 -0800 + + Move i965 video wm and sampler state to BOs. + +commit 48803eb7463ad14f3109f67fcf4ccff4362baaa2 +Author: Eric Anholt +Date: Thu Dec 4 13:22:12 2008 -0800 + + Stop allocating unused scratch space for i965 video. + +commit f3fe46b557a4dd7e212c2790fb47142d375c1c75 +Author: Eric Anholt +Date: Thu Dec 4 13:18:06 2008 -0800 + + Move i965 video vs/sf state to BOs. + +commit 4b9d3eac57a972c055c4acd7a10dfe8aa918131c +Author: Eric Anholt +Date: Thu Dec 4 13:11:13 2008 -0800 + + Move i965 video cc state to BOs. + +commit 176e92d89fdfb199780014722feab6ac25836dcc +Author: Eric Anholt +Date: Thu Dec 4 12:53:37 2008 -0800 + + Move I965DisplayVideoTextured unit state setup to separate functions. + +commit 61929f4c641e2ecb145ad2b22f7092d40e31ae6d +Author: Eric Anholt +Date: Thu Dec 4 11:44:35 2008 -0800 + + Move I965DisplayVideoTextured surface/sampler setup to separate functions. + +commit 73d03cb93ca761ee555b87558882e26bd2f10d91 +Author: Eric Anholt +Date: Thu Dec 4 11:37:38 2008 -0800 + + Move debug code for I965DisplayVideoTextured to separate functions. + +commit df01d8f0791bd825c96d9d5e20313d5ffcfeb532 +Author: Zhenyu Wang +Date: Thu Dec 4 16:11:33 2008 +0800 + + Change master version to 2.6.99.1 + +commit b156b3165e1aae5df0353737d0335ac2e653f5fd +Author: Julien Cristau +Date: Wed Dec 3 04:35:38 2008 +0100 + + Don't unconditionally define DRI2 + + xorg-server.h will define it if the server has dri2 support. + +commit 8d7cbab267e8fbcb2fcf90b18346b60607277266 +Author: Zhenyu Wang +Date: Thu Dec 4 18:43:03 2008 +0800 + + Fix maxium backlight level restored issue + + The origin check for bring back max value for '0' + backlight level is ok for legacy or combo control method + as '0' mostly doesn't act in ideal lowest level. But it + breaks in using kernel control method which should provide + a reasonable backlight range. + + This is tested fine on T61 with thinkpad_acpi module. + +commit 32e7d47925b445a85847d77651b258e117aaaffe +Author: Zhenyu Wang +Date: Thu Dec 4 09:24:31 2008 +0800 + + Disable XvMC on DRI2 for now + +commit 293f6232c6c0ce12802a2123edfab4551d25e266 +Author: Dave Airlie +Date: Wed Dec 3 16:51:25 2008 -0800 + + uxa: don't call composite routines with no buffer. + + We can get a case with gnome-terminal + links, where we get two arrays + of glyphs all with 0 width and 0 heights in them. If this happens + we manage to get to this case without any buffer setup and segfault. + + (cherry picked from commit 717c7492a0f6ba3fb3eabda33515881eef314155) + +commit 457a680afd0d8f835131ea72be0c3c618c2892c7 +Author: Eric Anholt +Date: Wed Dec 3 13:17:26 2008 -0800 + + Enable tiling for DRI2 back/depth buffers. + + This results in allocation overhead for small (8x8-128x128 or so) pixmaps with + DRI2, but we're interested in looking at tiling them in general in the near + future, anyway. + +commit b662ecccb5c036fcc4aa19026642bde0a1ca2ac8 +Author: Eric Anholt +Date: Wed Dec 3 10:50:33 2008 -0800 + + Re-enable composite accel on 965 with UXA. + + This was blocked on getting 965 render aware of BO pixmaps, which is happily + now the case. + +commit d426f799f541cb32fab134f2af068c6cd31923d9 +Author: Paulo Cesar Pereira de Andrade +Date: Wed Dec 3 14:59:21 2008 -0200 + + Include prior to including "edid.h" from the sdk. + +commit 07f5a8223187c1abc79c104d2fa5859a54cecd30 +Author: Robert Lowery +Date: Wed Dec 3 09:48:23 2008 +0800 + + TV: add support to set TV margins in xorg.conf + +commit 00ae7a571b6413aa2530e4f1310f8f4646631946 +Author: Eric Anholt +Date: Tue Dec 2 13:08:23 2008 -0800 + + UXA: Add support for tiled front/back/depth by cutting over to the GTT map. + +commit 34d54db945c67a2fee0a38cc9eafc463b8413669 +Author: Eric Anholt +Date: Tue Dec 2 13:01:56 2008 -0800 + + Remove DRI_MM defines which are always true now. + +commit f7540df184a75a749cabcfa2da8974d3d0714ea6 +Merge: 5f34702 ee87f7b +Author: Keith Packard +Date: Mon Dec 1 19:06:09 2008 -0800 + + Merge commit 'origin/dri2' + +commit 5f347020a52b583e19d333361ea7bf2591255899 +Author: Paulo Cesar Pereira de Andrade +Date: Sat Nov 29 02:35:59 2008 -0200 + + Export libIntelXvMC and libI80XvMC symbols. + + This is a side effect of adding the visibility flags to XORG_CFLAGS. + +commit ec7fd3d1b477928f9bffde1a72d7f3fdea89e629 +Merge: d978cd4 baec75a +Author: Zou Nan hai +Date: Thu Nov 27 10:48:09 2008 +0800 + + Merge branch '965-xvmc' + + Conflicts: + + src/common.h + src/i830_hwmc.c + src/i830_video.c + +commit d978cd4b453ea588ed2fc2f2cb4ec26856fe00d4 +Author: Wu Fengguang +Date: Thu Nov 20 00:47:25 2008 -0800 + + refresh batch_bo reference after intel_batch_flush() + + The call into intel_batch_flush() will invalidate the pI830->batch_bo + stored in bo_table[0]. Fix it by re-read the refreshed value. + + Signed-off-by: Wu Fengguang + Signed-off-by: Eric Anholt + +commit ee87f7becc2138348ec0d948829db6e86cee86da +Merge: 3dd7f0f a5b1e62 +Author: Kristian Høgsberg +Date: Wed Nov 12 16:40:37 2008 -0500 + + Merge commit 'origin/master' into dri2 + + Conflicts: + src/i830_dri.c + src/i830_driver.c + src/i830_memory.c + +commit 30c29627c859f1f6780aa652d6de4fa985b63dd0 +Author: Jesse Barnes +Date: Thu Nov 13 12:35:02 2008 -0800 + + Make sure DRM library paths are included + + We need @DRM_LIBS@ in order to find drm_intel if installed in a + non-standard path. + +commit 42ec6938bdea3a5b065a4248fdca5f031415191e +Author: Ma Ling +Date: Fri Nov 7 14:23:41 2008 +0800 + + enable Intel G35 SDVO HDMI audio output + + Set the SDVO_AUDIO_ENABLE bit to enable SDVO HDMI audio output of the + Intel G35 chipset. + + Signed-off-by: Ma Ling + Signed-off-by: Wu Fengguang + +commit 42b3903c3fda95a7c536cb957d8163d8dc54a9a1 +Author: Wu Fengguang +Date: Fri Nov 7 14:23:40 2008 +0800 + + enable Intel G45 integrated HDMI audio output + + Enable audio output for the integrated HDMI of Intel G45 chipset + by introducing the SDVO_AUDIO_ENABLE bit. + + Signed-off-by: Wu Fengguang + +commit 293f4a8b6d1ca8a47d14c4d4b5904b85a8167e12 +Author: Wu Fengguang +Date: Thu Nov 13 09:50:37 2008 +0800 + + introduce i830_hdmi_priv.has_hdmi_sink + + HDMI is compatible with DVI, and we've seen many boards that + use HDMI port for DVI output. + + So Zhenyu proposed this flag: i830_hdmi_priv.has_hdmi_sink + to indicate the presence of HDMI capable monitors. + + Signed-off-by: Wu Fengguang + +commit 667923559219429b0c5fec12a0164f7eba1f8f2d +Author: Jesse Barnes +Date: Tue Nov 11 12:55:06 2008 -0800 + + Default to FULL_ASPECT panel fitting + + Now that 8xx is fixed, we should be able to preserve aspect ratio by + default. + + Fixes fdo bz #18033. + +commit 65cd0fbb018b2c18f1571dc0924c7d92eaf794ad +Author: Zhenyu Wang +Date: Tue Nov 11 09:36:50 2008 +0800 + + TV: fix contrast and saturation for 915/945G + + 915/945G uses exponent-mantissa format instead of + fixed-point format on 965G. + +commit a5b1e62337d4e8840347bb186db48697f0690a19 +Author: Zhenyu Wang +Date: Fri Nov 7 16:06:26 2008 +0800 + + quirk LVDS on Asus Eee box + + Reported by Yang Sheng + +commit 9942cfa6dcc70a09ea38f738b1e73e3f005080b9 +Author: Keith Packard +Date: Thu Nov 6 15:04:27 2008 -0800 + + Use long crt hotplug activation time on GM45. + + The GM45 b-spec requires the use of the longer hotplug activation period, + but does not require looping twice over the detection logic. With this + patch, CRT detection appears solid on my GM45. + + Signed-off-by: Keith Packard + +commit 226efa7c74c0ed8a7b974a3727c5d7322c8ef815 +Author: Zhenyu Wang +Date: Wed Oct 29 22:41:20 2008 +0800 + + TV: subcarrier fix for NTSC and PAL + + Using subcarrier DDA values from spec give more close result to + standard frequency. + +commit 3651341292d90b7ded4c3f013bcb0f46537a113a +Author: Zhenyu Wang +Date: Wed Oct 29 20:41:46 2008 +0800 + + TV: fix timing parameters for PAL, 480p, 1080i + +commit b404afb755b608b02bcf0be1f8fe8a38d3d7bc1e +Author: Zhenyu Wang +Date: Wed Oct 29 20:32:18 2008 +0800 + + TV: save serveral TV_CTL register fields in mode set + + Driver should keep those fields according with spec. + +commit 2ae91f0ffdadfb393d526b94e21914a31aa14232 +Author: Zhenyu Wang +Date: Wed Oct 29 20:26:44 2008 +0800 + + TV: fix default contrast and saturation modifier + + Color knobs was set with higher modifier which caused strong color + on TV screen. Setting fixed point modifier to default 1.0 makes picture + on TV look nicer. + +commit c4cab00ef7f57fc27776f53263aacec2edf6f959 +Author: Zhenyu Wang +Date: Wed Oct 29 20:26:03 2008 +0800 + + TV: white space cleanup + +commit b130f94f26111e1a12ce869292915504588d0369 +Author: Zhenyu Wang +Date: Thu Nov 6 10:14:00 2008 +0800 + + SDVO: fix more command definition errors + +commit 3ab979da5c867fb862e33a80b973a35d56d56a55 +Author: Zhenyu Wang +Date: Mon Nov 3 16:05:28 2008 +0800 + + SDVO: add command for set monitor power state + + SDVO encoder power state must be higher than monitor's state. + This only adds command and doesn't enable monitor power state + setting yet. + +commit f558a4972d1cca03785da025170259c61541ee63 +Author: Zhenyu Wang +Date: Mon Nov 3 16:01:40 2008 +0800 + + SDVO: add GetScaledHDTVResolutionSupport command + +commit cd8cbff5d7921d2f4fdac106c3d54414310af94d +Author: Zhenyu Wang +Date: Mon Nov 3 15:20:18 2008 +0800 + + SDVO: fix sdvo tv format and sdtv resolution request/reply definition + +commit 61672b8c458ecf449138c51aeb12cf24dbbd59d9 +Author: Zhenyu Wang +Date: Mon Nov 3 14:59:53 2008 +0800 + + SDVO: add HDMI audio encrypt change bit for GetInterruptEventSource command + +commit 45fb04474d0e67643a633dcc3aeb4efe7fd71ea1 +Author: Zhenyu Wang +Date: Mon Nov 3 14:51:14 2008 +0800 + + SDVO: fix wrong order of sdvo version's major/minor + +commit 5cbf1e72711e906b5309694045b56933e14dca06 +Author: Zhenyu Wang +Date: Thu Nov 6 09:46:54 2008 +0800 + + Make IS_GM45 into IS_G4X define + + Those are identical that using one define is much clear. + And it can also apply fixes for GM45 too, which is missing with + origin define. + +commit 78b6cff3b6ec9513ede3e71d81a828967e6c0068 +Author: Eric Anholt +Date: Wed Nov 5 14:39:19 2008 -0800 + + i965: Support render acceleration with pixmaps in BOs. + + This required reordering the relocation emits for surface/binding table + so that we didn't add new relocations to things that had already been + relocated at (the check_aperture requirement). + +commit 801f0eac4f7b0071ed21eb9c68c5a951e1cc409a +Author: Eric Anholt +Date: Wed Nov 5 13:29:39 2008 -0800 + + Make I830FALLBACK debugging a runtime instead of compile-time option. + +commit d828b0802c939cb12664db4dd157a4944a4db01b +Author: Maxim Levitsky +Date: Wed Nov 5 13:47:09 2008 -0800 + + Add an option to make the overlay be the first XV adaptor. + +commit 040d9bf9d8748d1ed8f977a6356d198def978b51 +Author: Eric Anholt +Date: Thu Oct 30 13:55:07 2008 -0700 + + Remove the CheckDevices timer. + + This was an early attempt to support display switch hotkey. It never really + worked, as the events didn't show up when they should. It also cost a wakeup + every second to check just in case, instead of taking an interrupt like we can + now using ACPI. Additionally, some machines apparently get stuck with the + event set and end up DDCing checking for new devices every second and + smashing your video modes. + +commit 08914cceda6c57530023cdcdb5ad7e4024f36a6e +Author: Carl Worth +Date: Thu Oct 30 16:46:06 2008 -0700 + + Use buffer objects for binding table and surface-state objects. + + Instead of having a static array for these and doing an ugly sync + everytime we recycle the array, we now simply allocate short-lived + buffer objects for this dynamic state. The dri layer, in turn, can + take care of efficiently reusing objects as necessary. + + On a GM965 this change was tested to improve the performance of + x11perf -aa10text from roughly 120000 to 154000 glyphs/sec. + +commit 47cc3d79da8174ba30ca130b0fb6c7d9c871caed +Author: Carl Worth +Date: Thu Oct 30 16:53:57 2008 -0700 + + Unreference the vertex_buffer_bo in gen4_render_state_cleanup + + This avoids leaking one buffer object. + +commit 88700acf30f9eab8f96c197c7d113ce38c0af6e7 +Author: Carl Worth +Date: Mon Oct 27 14:23:02 2008 -0700 + + Rename gen4_dynamic_state to gen4_vertex_buffer + + We don't actually plan to put any other data in this structure, so it + doesn't make sense to have a generic name, (since we'll only be using + it for our vertex buffer). + +commit 9e95722763e2379d14a6b46c3750a44713da5135 +Author: Carl Worth +Date: Thu Oct 23 15:43:19 2008 -0700 + + 965: Move composite setup to new _emit_batch_header_for_composite + + This function is the new name for _allocate_dynamic_state now that + it also emits everything to the batch necessary for setting up a + composite operation. This happens in prepare_composite() every + time and in composite() whenever our vertex buffer fills up. + + It's not yet strictly necessary to be redoing this setup in + composite() but it will be soon when the setup starts referring + to buffer objects for surface state and binding table. This + move prepares for that. + +commit fcb2a5a1253c505913e66b08107c0a9f57b07bad +Author: Carl Worth +Date: Wed Oct 22 17:12:47 2008 -0700 + + Use buffer object for vertex buffer (in new gen4_dynamic_state) + + This begins the process of separating the dynamic data from the + static data, (still to move are the surface state and binding + table objects). The new dynamic_state is stored in a buffer + object, so this patch restores the buffer-object-for-vertex-buffer + functionality originally in commit 1abf4d3a7a and later reverted + in 5c9a62a29f. + + A notable difference is that this time we actually do use + check_aperture_space to ensure things will fit, (assuming + there's a non-empty implementation under that). + +commit 7e68786cf746b6b984b184080578db1947b268ed +Author: Jesse Barnes +Date: Thu Oct 30 13:40:23 2008 -0700 + + Don't modify render standby if kernel mode setting is active + + Since we can't bang on registers directly in that case. + +commit 87ea531c5dc5b39809395b277c330854aaaaf019 +Author: Adam Jackson +Date: Fri Oct 24 14:47:27 2008 -0400 + + Quirk: No LVDS on Dell Studio Hybrid + +commit 4d5360b1f3666bca4ed44c7f1b9217b8157c74b9 +Author: Carl Worth +Date: Wed Oct 22 16:17:39 2008 -0700 + + Use consistent idiom for obtaining static_state + + This doesn't make any difference, but it's cleaner to have + each function follow the same idiom for obtaining these pointers. + +commit 36fc53d068673497e77796ba69e010d08c359447 +Author: Carl Worth +Date: Wed Oct 22 15:45:51 2008 -0700 + + Rename state_base_offset to static_state_offset in gen4_static_state_init + + More cleanup here, and again no functional change. + +commit 8fda7df0071046d057eeaf74328668b227af52a9 +Author: Carl Worth +Date: Wed Oct 22 15:28:24 2008 -0700 + + Rename gen4_state_init to gen4_static_state_init + + This follows naturally from the structure rename. + + Also we make things less muddled by having this function + actually accept a pointer to a gen4_static_state_t rather + than a gen4_state_t, (and then fetching the desired pointer + out from that). + + Again, no intended change in functionality here. + +commit acba4238116f2ead7be88d49c4c56c7cd6d7f3b8 +Author: Carl Worth +Date: Wed Oct 22 15:12:57 2008 -0700 + + Rename gen4_state_t to gen4_static_state_t + + It doesn't contain only static data yet, but it will soon, so + this renaming prepares for that. Also, this helps make things + more clear between gen4_render_state_t and gen4_state_t which + were muddled before, (particularly because the corresponding + identifiers were render_state and card_state). The card_state + identifier is now known as static_state which should be less + confusing. + + This change is strictly search-and-replace with no functional + changes. + +commit c6550fa53d92c21dc677b86ebcd528a4ac640764 +Author: Carl Worth +Date: Wed Oct 22 14:51:42 2008 -0700 + + Ignore intel_gtt binary + + We simply forgot to add this to .gitignore when it was created. + +commit ee3df629eaa388f09bec33ad04d443359d63ea7f +Author: Dave Airlie +Date: Mon Oct 20 18:46:49 2008 -0700 + + Default kernel mode setting to off, add configure flag to enable + + Should help avoid unpleasantness. + +commit 55cb65c6fdcf932d09e97abfa5374ee574676798 +Author: Eric Anholt +Date: Sun Oct 19 21:22:37 2008 -0700 + + Enable Option "Legacy3D" for 965 as well, and clarify both the docs and code. + + Signed-off-by: Eric Anholt + Acked-by: Keith Packard + +commit 28bb056f8cd326770590157412835318863b4134 +Author: Keith Packard +Date: Sat Oct 18 19:37:09 2008 -0700 + + Use pipes, not planes for sarea geometry data + + Vblank in the kernel is far simpler if it deals with pipes instead of + planes, so we're changing both user and kernel side. This is the user mode + side. This fixes both i830_crtc_dpms and i830PipeSetBase, the two functions + which copy geometry from the crtc to the sarea. + + Signed-off-by: Keith Packard + +commit 546e2aca5b8b5d9f486d119ea2872ccd2b056054 +Author: Keith Packard +Date: Tue Oct 14 14:38:05 2008 -0700 + + Reduce incidence of MI_FLUSH usage. + + This tracks whether the last command in each batch is an MI_FLUSH command + and avoids appending another MI_FLUSH in the non-GEM cases. + + Signed-off-by: Keith Packard + +commit 9b91cdf7ac88982880c887ffb0811c92157a7945 +Author: Keith Packard +Date: Sun Oct 19 14:24:46 2008 -0700 + + No need to check for drmCommandWriteRead; we link against libdrm + + My checks for DRM enabled were a bit too extensive; drmCommandWriteRead is + part of libdrm which the driver is always linked against. Only the symbols + in the DRI module need to be checked here. + + Signed-off-by: Keith Packard + +commit c25437a69490b09acff335a81a38aa540f0822f5 +Author: Keith Packard +Date: Sun Oct 19 13:39:04 2008 -0700 + + Remove accidental 'return;' left at the top of I830DRIInitBuffers + + I was testing the behaviour of the XAA-based DRI buffer drawing code for + tiled buffers and accidentally left I830DRIInitBuffers disabled. + + Signed-off-by: Keith Packard + +commit ae224be27bb4432f25dae851debea6966bf31261 +Author: Keith Packard +Date: Tue Oct 14 14:35:36 2008 -0700 + + Check for DRI module before initializing GEM mm + + GEM requires the DRI extension module currently, so make sure that is loaded + (by checking for the DRIQueryVersion symbol) before trying to call it. This + allows the server to start with the DRI extension disabled. + + Signed-off-by: Keith Packard + +commit 7ddea0447c8972104d43cd7966f5ce89b4cca20c +Author: Keith Packard +Date: Fri Oct 17 00:07:09 2008 -0700 + + Handle differently tiled front/back/depth/third in DRI window management + + When moving or clearing the extra buffer contents associated with DRI + windows, the XAA code needs to see which buffer is being manipulated in the + Setup functions to program the tiling values correctly. Calling + I830SelectBuffer and not then calling I830Setup... would result in mis-tiled + rendering. + + Signed-off-by: Keith Packard + Signed-off-by: Eric Anholt + +commit c946383afc644ae7740e3c3146424fdd86c05285 +Author: Keith Packard +Date: Fri Oct 17 00:07:08 2008 -0700 + + XAA tiling support was mis-computing adjusted pitch (>>4 instead of >>2) + + This may well explain why XAA never worked well on tiled front buffers; + tiled buffers require a different pitch programming on 965 than non-tiled + buffers, in dwords rather than bytes. + + Signed-off-by: Keith Packard + Signed-off-by: Eric Anholt + +commit 871728a0cbba12579c830e67020cc0c69c1611bb +Author: Zhenyu Wang +Date: Thu Oct 16 10:35:17 2008 +0800 + + Don't handle irq in GEM mode + +commit 2419bce9efbff63529074e64af5ec5c2e62e368b +Author: Zhenyu Wang +Date: Thu Oct 16 10:28:16 2008 +0800 + + Make GTT dumper work on other 9XX chips + +commit 986c8df79e83c369655ad786a6bf6342b53c535d +Author: Adam Jackson +Date: Thu Oct 16 10:24:04 2008 +0800 + + Fix Mac mini crash in DDC mode probe + + SDVO on Mac mini trys to get EDID from CRT port, which + failed with recent DVI-I change. + +commit 6707371176147340fabc9ab6f1e3d6d5ac980662 +Author: Eric Anholt +Date: Wed Oct 15 08:12:11 2008 -0700 + + Remove gratuitous flushing in EXA after solid operations. + + This snuck in with the UXA rename commit. + +commit 3dd7f0f9423bb891bc99cd3b77dc3d57e057a7ef +Author: Kristian Høgsberg +Date: Tue Oct 14 23:57:10 2008 -0400 + + Update to DRI2 changes. + + Implement DRI2CopyRegion and provide drm device filename to DRI2 module. + +commit 282f51c3f0e5bc2cedd2f60f458ca2662290d471 +Merge: 8a54e3b 4dd0068 +Author: Kristian Høgsberg +Date: Tue Oct 14 23:13:40 2008 -0400 + + Merge commit 'origin/master' into HEAD + +commit 4dd00681dd0f9fce8dfd4592b46418edbbd2eeb4 +Author: Eric Anholt +Date: Tue Oct 14 11:33:33 2008 -0700 + + Fix broken stolen memory counting on G4X. + + On the GM45 we were assuming too little stolen memory (mostly harmless, + except when it wasn't, until the AGP fix), and on the G45 we were assuming too + much stolen memory, which was quite harmful when we touched the page that + didn't get mapped. + + Future stolen memory accounting should use src/reg_dumper/intel_gtt before and + after enabling AGP on the chipset to confirm that only the GTT entries not + mapped to stolen are replaced, and that all of the unmapped GTT entries are + replaced with the constant scratch page. + +commit e7e49bed7e254256f8cc0d4afcdfadc6dadf19e6 +Author: Eric Anholt +Date: Tue Oct 14 10:38:05 2008 -0700 + + Add a GTT dumper for G4x debugging. + +commit 1c6ea4ab4772453da915306045add8d147d567f2 +Author: Julien Cristau +Date: Sun Oct 12 15:10:22 2008 +0200 + + Typo fix + + Reported by Tomas Carnecky on IRC + +commit 6cb4150160bb1e1365773561fb53294ad9248a0e +Author: Zhenyu Wang +Date: Sun Oct 12 08:07:44 2008 +0800 + + Bug #17892: Fix possible crash in CRT probe + + Introduced in patch for DVI-I CRT probe, if no EDID + CRT monitor is connected, origin code destroys default + DDC bus which causes crash in later get_modes call. + Change it to setup and destroy DDC bus as needed in + get_modes, so we always reprobe and get current state. + +commit 140451abb41fbd68d5aac4736c1cf1ec2805dd9e +Author: Keith Packard +Date: Thu Oct 9 18:18:34 2008 -0700 + + For non-DRM, add NOOPs after BATCH_BUFFER_START to verify completion + + In non-DRM mode, the driver waits for the hardware by checking the ring + pointers; when the ring is empty, it assumes the hardware is idle. However, + the hardware updates the ring pointers before executing a command, so if the + MI_BATCH_BUFFER_START is the last command in the ring, the driver will think + the hardware is idle while it may still be processing the contents of the + batch buffer. Placing NOOPs after the BATCH_BUFFER_START allows the driver + to know that the hardware has completed the batch buffer. + + Signed-off-by: Keith Packard + +commit d09d938bf26ea0c44352ff6e7a57ba43f4047fdb +Author: Keith Packard +Date: Thu Oct 9 18:17:13 2008 -0700 + + i830 nondrm batch buffer insertion was missing ADVANCE_LP_RING() call + + The ring commands to insert a batch buffer to the ring in i830 form were not + terminated by a call to ADVANCE_LP_RING(). This surely would have caused + chaos. + + Signed-off-by: Keith Packard + +commit d24010b7b3f2419beb40dc5ae1e8aeb3e04b5a93 +Author: Carl Worth +Date: Thu Oct 9 14:29:04 2008 -0700 + + Disable frame buffer compression by default for GM965. + + We haven't found a way to make FBC work reliably with GM965 yet, + (it often fails to notice CPU writes). This appears to be a + specific problem with this device, (as we haven't gotten similar + bug reports for subsequent devices such as GM45). So FBC is + now disabled by default for GM965 but can still be enabled with + the FrameBufferCompression option for experimenting/debugging. + + This resolves bug #16257: + + [GM965 EXA] Frame-buffer compression broken for CPU writes (XPutImage) + https://bugs.freedesktop.org/show_bug.cgi?id=16257 + +commit 4128b01ec84ffa0f03c335c36738f383376d9381 +Author: Zhenyu Wang +Date: Thu Oct 9 09:19:41 2008 +0800 + + Remove Lenovo T61 TV quirk + + BIOS already says no integrated TV, and this quirk blocks TV + on R61i which has the same subdevice id as T61. + +commit 74571363539426abeb0a1af11f3bb545d91ed6c2 +Author: Zhenyu Wang +Date: Wed Oct 8 15:36:10 2008 +0800 + + Put forware VBIOS data parsing + + i830_bios_init() is called too late after output init, which + makes bios data mostly useless, and caused all TV init fail as + tv_present flag is not set. + +commit 111dd151dedf535464d638461f9485ec2939780e +Author: Lukas Hejtmanek +Date: Tue Oct 7 15:07:08 2008 +0200 + + Fix driver build against server master. + + Broken by 3a4151b69daa478ac6edf042d604ee41e8429c0d + +commit 3a4151b69daa478ac6edf042d604ee41e8429c0d +Author: Eric Anholt +Date: Mon Oct 6 17:00:08 2008 -0700 + + Fix driver build against server 1.4.2. + + This disables UXA and DRM modesetting pre-1.5, due to privates handling + issues. + +commit 3621183cf4acef23414e8d69c34b1e587f52ec67 +Author: Eric Anholt +Date: Mon Oct 6 16:59:16 2008 -0700 + + Fix bios_reader build against old servers. + + The server's pci_device structure ends up conflicting with libpciaccess's. + Just don't include the server structure for this non-server tool. + +commit 080d36648f92d3b9a559e5458687fa82afab411f +Author: Eric Anholt +Date: Wed Oct 1 16:13:09 2008 -0700 + + Add support for RepeatPad and RepeatReflect to 915 and 830-class Render accel. + +commit 5e04b5ad1b618655e201cbf1f5b2585aa6be0c17 +Merge: 979bb10 260cbcf +Author: Jesse Barnes +Date: Mon Oct 6 16:08:12 2008 -0700 + + Merge branch 'master' of ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 979bb109c6d76fe18b9e29f55afb2548f890bbfe +Author: Jesse Barnes +Date: Mon Oct 6 16:05:46 2008 -0700 + + Document more VBIOS functionality + + Document a few more VBT structures and comment on VBIOS communication a + bit. There should be enough there now for a sufficiently motivated + developer to start implementing support for hotkeys and other features + on pre-IGD OpRegion machines. + +commit 260cbcfe61868175ba3e649ce07d43f57601f9be +Author: Carl Worth +Date: Mon Oct 6 13:17:59 2008 -0700 + + Document and use 'legacy' border color mode + + It's very convenient that the hardware supports this non-default + mode since it's exactly what is specified by the Render extension. + This provides a more efficient means of fixing bug #16820: + + [EXA] Composition result in black for areas outside of source-surface bo + https://bugs.freedesktop.org/show_bug.cgi?id=16820 + + without the software fallback we had in the earlier fix, + (commit 76c9ece36e6400fd10f364ee330faea470e2da64 ). + +commit 98ca9e2af1b0a67ed91e10cf661af70dfba44d43 +Author: Carl Worth +Date: Mon Oct 6 13:16:37 2008 -0700 + + Rename default_color to border_color + + This is consistent with the documentation, (and just plain makes + more sense). + +commit 175b30e3828266a89021c2439119545099d72715 +Author: Carl Worth +Date: Mon Oct 6 12:48:07 2008 -0700 + + Revert "Fallback to software for RepeatNone with transformed RGB-only pictures." + + This reverts commit 76c9ece36e6400fd10f364ee330faea470e2da64. + + We've learned a new technique that should let us avoid this fallback + to software. See following commit. + +commit 21cce1998a10db520c390eb5061814867564c583 +Author: Shuang He +Date: Mon Oct 6 09:48:21 2008 +0800 + + Fix a typo in G965 texture video code + +commit 76c9ece36e6400fd10f364ee330faea470e2da64 +Author: Carl Worth +Date: Thu Oct 2 20:40:14 2008 -0700 + + Fallback to software for RepeatNone with transformed RGB-only pictures. + + We wish it wouldn't, but the hardware ignores the alpha in the + BorderColor we set when the source picture format has no alpha + in it, (and it uses alpha of 1.0 where we want 0.0). For now, + fallback for these cases. This gives a correct result, but + obviously is not as fast as we would like. + + This fixes bug #16820: + + [EXA] Composition result in black for areas outside of source-surface bounds + https://bugs.freedesktop.org/show_bug.cgi?id=16820 + +commit f1dbc266ccfe26c6b9a272e40a5bbe9afaa4f2e0 +Author: Eric Anholt +Date: Thu Oct 2 14:45:12 2008 -0700 + + Work around libpciaccess reporting a 0 rom size by guessing. + + I required the following patch on top of this to work around libpciaccess + brokenness. libpciaccess reports 0 rom size if there's no rom resource, + even if the rom file exists in sysfs. + +commit 8304b405e0dc2f31fd2d2fd82e150ba502ab74e2 +Author: Keith Packard +Date: Mon Sep 29 17:37:28 2008 -0700 + + Eliminate INT10 call to get BIOS contents + + libpciaccess (and the old X server PCI code as well) provides a function to + get the ROM contents. Code to use that was already present in the driver and + used if the INT10 function failed. Skip the INT10 and just use libpciaccess + as that eliminates several module loads and scary use of vm86. + + Signed-off-by: Keith Packard + +commit ab2b70f831314f81a581bfb1e48d059a3a2b0b06 +Author: Carl Worth +Date: Wed Oct 1 16:05:16 2008 -0700 + + Prefer repeatType field over using both repeat and repeatType. + + Eric informed me that the repeat field exists only for backwards + compatibility with old drivers that weren't prepared for values + other than 0 or 1 here. Since we are, we can just ignore that + field and examine only repeatType. So the code's a (tiny) bit + simpler this way. + +commit 128223ee9b7880e640056475462eca9a88415492 +Author: Carl Worth +Date: Wed Oct 1 15:29:04 2008 -0700 + + Add support for RepeatPad and RepeatReflect. + + It's quite simple to support these modes---we simply need to + turn on the support for them in the hardware. + + These changes have been verified with the extend-pad and + extend-reflect tests in cairo's test suite. However, this + currently required using a custom-modified version of cairo. + The issue is that released versions of cairo, (and even + cairo master so far), don't pass RepeatPad and RepeatReflect + to Render, (due to various bugs and workarounds in cairo + and pixman). I do plan to fix those issues in cairo, so that + in a future release of cairo, (1.8.2 perhaps?), the cairo + test suite will usefully test these new repeat modes in our + driver. + +commit b7279f1be1b913c1c6ee8ebfb95c97800217a821 +Author: Carl Worth +Date: Wed Oct 1 15:26:39 2008 -0700 + + Examine picture repeatType as well as repeat field. + + The existing switch statement was switching on the Boolean + repeat field rather than the correct repeatType field. This + had not caused any problem before as only two possible repeat + values were supported (RepeatNone = 0 and RepeatNormal = 1) + so they were always the same as the repeat field. + + Soon, however, we'll be supporting more repeat types, so we'll + need to switch on the correct value. + +commit ffcbbb071f1cde90fe0dc4887a05dd66c0e66985 +Merge: 1eb46d0 bf8a3ff +Author: Jesse Barnes +Date: Tue Sep 30 16:59:35 2008 -0700 + + Merge branch 'master' into xf86-video-intel-2.5-branch + +commit bf8a3ffeaa4df9ecbad7abff9a44d714de2fa104 +Author: Jesse Barnes +Date: Tue Sep 30 16:59:02 2008 -0700 + + Revert "Use -Werror by default" + + This reverts commit f315e9d1ad92562195ce42b956d4be6b31e8a13e. The world + isn't ready for a warning free build. + +commit 1eb46d055b147941fa529ac582c336a114f47892 +Merge: 8408995 497b742 +Author: Jesse Barnes +Date: Tue Sep 30 12:54:27 2008 -0700 + + Merge branch 'master' into xf86-video-intel-2.5-branch + +commit 497b7420c4a76df553ed53322a390a1c754ce30c +Author: Olivier Fourdan +Date: Tue Sep 30 12:53:11 2008 -0700 + + Fix ordering of VGA vs. plane disable + + From the Intel 965 Programmer’s Reference Manual, volume 3, + chapter 2.2.2 "Mode Switch Programming Sequence". + + The disable sequence should be: + + - Disable planes (VGA or hires) + - Disable pipe + - Disable VGA display in 0x71400 bit 31 + + This patch implements that order plus waits for a vblank at the end. + + Fixes bug #17756. + +commit a4568740ee296bc392843fd324d2a047e7862187 +Author: Jesse Barnes +Date: Tue Sep 30 12:48:32 2008 -0700 + + Be more verbose about panel data in VBIOS dumper + + Dump more panel data, including number of expected entries. Had to + refactor things a bit, but now each function should get size information + so further checking can be added more easily. + +commit fa2586a40f20e73ec7420466638e8f595e0da987 +Author: Jesse Barnes +Date: Tue Sep 30 12:46:20 2008 -0700 + + Use VBT LFP info pointers by default + + On some machines it appears that the LFP info pointers give us more + accurate panel info than if we index into the LFP data table using the + panel type index. Early reports indicate that using the pointers + doesn't cause regressions, so switch to them by default to help 8xx + machines. + + Fixes bug 17310 (and hopefully 17658 too). + +commit f315e9d1ad92562195ce42b956d4be6b31e8a13e +Author: Jesse Barnes +Date: Tue Sep 30 12:07:52 2008 -0700 + + Use -Werror by default + +commit f082e877d54dbafa437fd05e9c07e870cd513be9 +Author: Jesse Barnes +Date: Tue Sep 30 12:06:46 2008 -0700 + + Work around gcc uninitialized variable warnings + + GCC isn't smart enough to analyze the control flow and figure out that + these are false positives, but initializing them shouldn't hurt, so work + around it. + +commit 836d24f2cc3836fbd1695cf1f88c2af975b4862c +Author: Keith Packard +Date: Mon Sep 29 19:02:51 2008 -0700 + + Use uintptr_t instead of uint64_t to hold pointer value + +commit baec75a56d91546443a2e04812face4997bc764b +Author: Zou Nan hai +Date: Sun Sep 28 11:18:40 2008 +0800 + + [965-xvmc] 965q indirect media data workaround + +commit 11d304e99c0e11c28901ec28115d9c8b81a2b9cc +Author: Zhenyu Wang +Date: Sun Sep 28 10:08:26 2008 +0800 + + Bug #16631: add option for SDVO force detect + + Some ADD2 card doesn't get SDVO detect status setup right, + which disabled outputs on those cards. This adds a new + option "ForceSDVODetect" to probe all SDVO ports anyway. + +commit 1cc15ba454fdf54a7dea9da066e0a023a4742fab +Author: Zhenyu Wang +Date: Fri Sep 26 10:01:52 2008 +0800 + + Render register clock gating disable fix on 4 series chipset + +commit d6b2696f9ac14a81598e0147698209ad428fd45d +Author: Zhenyu Wang +Date: Fri Sep 26 09:53:03 2008 +0800 + + Do force CRT detect sequence twice on 4 series chipset + +commit d8a007b056e3d6c3e132ecac06368b21d2ac4123 +Author: Zhenyu Wang +Date: Fri Sep 26 09:44:59 2008 +0800 + + Bug #16515: Fix VT switch with DVI on G45 + + On DVI, centered VGA mode is used instead of native mode VGA, and + PLL on pipe is used instead of VGA PLL setting. So make sure PLL + settled down in restore time. + +commit a428892b76dba4c55e2ae28933d30e98d9fd646d +Author: Jesse Barnes +Date: Tue Sep 23 12:36:11 2008 -0700 + + Update supported hardware list + +commit 3c2f7d84785954eb91341f85abb175f299b2797d +Author: Zou Nan hai +Date: Tue Sep 23 17:15:42 2008 +0800 + + [965-xvmc] IGD support + +commit 08ab23bb87563517d5653bddf82763b5ef641bed +Author: Zou Nan hai +Date: Tue Sep 23 14:57:18 2008 +0800 + + [965-xvmc] optimize, pack some payload + +commit 8408995ffbf705aa0bc09ab72c58c2e31a4b70c3 +Merge: d18b86a afa630b +Author: Jesse Barnes +Date: Mon Sep 22 18:38:54 2008 -0700 + + Merge branch 'master' into xf86-video-intel-2.5-branch + +commit afa630b448e5993850433c9f0b129758ec4d37b5 +Author: Bryce Harrington +Date: Mon Sep 22 18:38:35 2008 -0700 + + Add TV out quirk for HP Compaq nx6110 + + Adds a TV out quirk for HP Compaq nx6110. Fixes bz #17683. + +commit 204a6281aa59e29027793ba5c84a5d9af7dc9e90 +Author: Jesse Barnes +Date: Mon Sep 22 18:38:03 2008 -0700 + + Revert "Add no TV out quirk for HP Compaq nx6110" + + This reverts commit 6a46022df57d09109fc119fedce99c156715a4d4. It should have + been attributed to Bryce. + +commit d18b86aa7fc9270e24ed9ea861ebbbbb54558fee +Merge: 9a7da65 6a46022 +Author: Jesse Barnes +Date: Mon Sep 22 18:03:39 2008 -0700 + + Merge branch 'master' into xf86-video-intel-2.5-branch + +commit 6a46022df57d09109fc119fedce99c156715a4d4 +Author: Jesse Barnes +Date: Mon Sep 22 13:26:58 2008 -0700 + + Add no TV out quirk for HP Compaq nx6110 + + Hopefully we can fix the VBT parsing code so we don't need this, but for the + time being it seems necessary. Fixes bz #17683. + +commit 10909d9b665864bda2b1654de009d556cd068726 +Author: Jesse Barnes +Date: Mon Sep 22 13:11:55 2008 -0700 + + Add Cappuccino SlimPRO SP625F to no LVDS quirks list + + Looks like this platform might contain VBTs that indicate an LFP is present + even though it isn't. Intended to fix bz #11368. + +commit 9a7da65e624060a37eef989963a9c79f13df30d3 +Merge: 043b6e7 2f93cfb +Author: Jesse Barnes +Date: Mon Sep 22 09:59:52 2008 -0700 + + Merge branch 'master' into xf86-video-intel-2.5-branch + +commit 2f93cfbc7e96acc32efb5e1ca49b817a81cba6e3 +Author: Zhenyu Wang +Date: Fri Sep 19 15:20:55 2008 +0800 + + Fix output detection for DVI-I + + For CRT this trys to probe all possible port for EDID and + detects got confirmed by EDID's d/a type bit. + For HDMI/DVI, also using EDID d/a type bit to ensure it should + handle the connect or not. + +commit 1fbe4d602816c9dfc5fba917b9fdc257d8d025b0 +Author: David Schleef +Date: Thu Sep 18 15:37:00 2008 +0800 + + Bug #17277: fix upscaling limit + + Oh duh (i830_video.c): + + /* Clamp dst width & height to 7x of src (overlay limit) */ + if(drw_w > (src_w * 7)) + drw_w = src_w * 7; + + if(drw_h > (src_h * 7)) + drw_h = src_h * 7; + + The condition I see in the documentation appears to be src_h/drw_h < 8, that + is, src_h < 8*drw_h. It appears this was "fixed" incorrectly in e784e152. + It seems difficult to believe that this limitation would exist at all for the + texture unit. + +commit bc36608e321e01a2be792688b4b734bb7c0667f7 +Author: Zhenyu Wang +Date: Thu Sep 18 10:42:33 2008 +0800 + + Check display stride limit when allocate front buffer + +commit 043b6e71b83eb05339a6f8c4814e6941f8b9695a +Author: Xiang, Haihao +Date: Tue Sep 16 13:21:43 2008 -0700 + + Move bufmgr init earlier so it's available at I830DRIDoMappings time. + + Fixes a crash with non-GEM mode. Bug #17540. + (cherry picked from commit 62b75df84c893bf28e20014cf88ce45064611dc9) + +commit 0a2d17f7c2ea9b695df1855aab4ccc519546d8e5 +Author: Xiang, Haihao +Date: Tue Sep 16 11:49:39 2008 -0700 + + Put back check for pI830->hw_status in setting hws in non-GEM mode. + + Fixes crashes on non-GEM systems with physical hardware status page. + + Bug #17540 + (cherry picked from commit 188d58dac9a87b56dbc34ec219cd196928bbcf64) + +commit 62b75df84c893bf28e20014cf88ce45064611dc9 +Author: Xiang, Haihao +Date: Tue Sep 16 13:21:43 2008 -0700 + + Move bufmgr init earlier so it's available at I830DRIDoMappings time. + + Fixes a crash with non-GEM mode. Bug #17540. + +commit 188d58dac9a87b56dbc34ec219cd196928bbcf64 +Author: Xiang, Haihao +Date: Tue Sep 16 11:49:39 2008 -0700 + + Put back check for pI830->hw_status in setting hws in non-GEM mode. + + Fixes crashes on non-GEM systems with physical hardware status page. + + Bug #17540 + +commit e2743a409a02978ca8e953dbbeeb96f61bbd5ce6 +Author: Jesse Barnes +Date: Fri Sep 12 14:22:48 2008 -0700 + + Only BO map render state if kernel mode setting is active + + We'll probably end up doing this differently, but avoid this path for now. + +commit 95b3e3a65a60aa264fbbfd141df980b534005264 +Merge: 94a86fa ec17c88 +Author: Jesse Barnes +Date: Fri Sep 12 13:42:06 2008 -0700 + + Merge branch 'master' into xf86-video-intel-2.5-branch + + Conflicts: + + configure.ac - resolved version number conflict + +commit 8a54e3be5c5057fe8e3c52c03401fdada7978c45 +Author: Keith Packard +Date: Fri Sep 12 12:47:13 2008 -0700 + + Fix mis-merge of DRI2 changes related to pI830->directRenderingType + + The old code had a directRendering boolean, the new one has an enum. A bunch + of the merges failed to remove the '!' in front of the old name, breaking a + bunch of 'we don't have DRI' tests. + +commit d8d95d8c71f2cd4bab277f44132ece7963714a5b +Author: Eric Anholt +Date: Thu Sep 11 16:11:46 2008 -0700 + + Fix build failures that should have been in the previous merge commit. + +commit ec17c88a0ed7c9cf4ad68aa52a7a891946a1c0f4 +Author: Zhenyu Wang +Date: Thu Sep 11 16:14:47 2008 +0800 + + Add support for G41 chipset + + G41 is another 4 series chipset like G45/43. + +commit f9c625e1e5ddfff06b38fdd4e596fd8eae5934d5 +Author: Zhenyu Wang +Date: Thu Sep 11 15:35:27 2008 +0800 + + Disable render standby + + Render standby is known to cause possible hang issue on some + mobile chips, so always disable it. + +commit 7e8eb6e20b6b1a2a3c1ef28f694fa23c68a15c48 +Merge: fba9b5a 58a3817 +Author: Eric Anholt +Date: Wed Sep 10 14:10:26 2008 -0700 + + Merge branch 'master' into dri2 + + Conflicts: + + src/i830_batchbuffer.c + src/i830_display.c + +commit 58a3817305ef1455a11be6ead8a8521dfc5875c7 +Author: Eric Anholt +Date: Tue Sep 9 11:02:49 2008 -0700 + + Track move of exec to bufmgr, and restoration of emit/wait funcs for non-drm. + +commit f367334c6392a717f6cd2f4ed02200be1c6d356a +Author: Eric Anholt +Date: Tue Sep 9 11:01:33 2008 -0700 + + Track the move of irq emit/wait to fake bufmgr. + +commit 0b4f7b630312b148ce4e172cb7cd9f673751b2a3 +Author: Eric Anholt +Date: Tue Sep 9 10:57:08 2008 -0700 + + Track move of bufmgr functions to libdrm_intel. + +commit 0f804bfa1e1e972e9b4e3b7c8db61e9877c50f50 +Author: Eric Anholt +Date: Tue Sep 9 19:17:05 2008 -0700 + + Bug #17446: Don't try to manage IRQs in GEM mode. + + The kernel told us that it was already doing so, resulting in failure. + +commit da63b5adec8555cc7b3e71f33933f4c9dd6f714e +Author: Eric Anholt +Date: Sun Aug 31 14:27:29 2008 -0700 + + Add some MCHBAR registers for debugging tile swizzling issues. + +commit c7aaf0118baa34e583df5f1c29c9dab9a6af6eb7 +Author: Dave Airlie +Date: Tue Sep 9 18:13:56 2008 +1000 + + mode: fix missing comma + +commit b9ef0ed7d7b96eca6394cd0d367369ec511d1bcd +Author: Daniel Stone +Date: Fri Sep 5 05:02:08 2008 +0300 + + i830: Fix timer leak + + TimerCancel just cancels the timer: it still leaves the TimerRec intact and + unfreed. + +commit fba9b5aff450d874ef98cafd3ecc0fd85f9597b5 +Author: Eric Anholt +Date: Wed Sep 3 16:49:07 2008 +0100 + + DRI2: Move pixmap pitch alignment for use with depth to pixmap create. + + The previous location for pitch fixup would have only worked when depth was + used with the backbuffer, and no page flipping or other adventures occurred. + +commit 71ec627c3a65cfc7bca7353af43c60b18e73230d +Author: Eric Anholt +Date: Wed Sep 3 16:37:25 2008 +0100 + + DRI2: Emit the MI_FLUSH before flushing batch in swapbuffers. + + Should fix issues with swapbuffers flushing to front buffer on 965. + +commit daaefd173b4c98d0ebabd43352bfa3a030a62e4b +Author: Eric Anholt +Date: Wed Sep 3 16:26:27 2008 +0100 + + UXA: Re-enable non-965 render. + +commit 32bb5fc7db14911d0438aea1504e1551b2c9fc25 +Author: Eric Anholt +Date: Wed Sep 3 16:19:03 2008 +0100 + + Don't set up sarea or drm mappings in DRI2 mode. + +commit 4a5e31138115f435be7f8f5999b1b2329a18d669 +Author: Kristian Høgsberg +Date: Wed Sep 3 16:18:23 2008 +0100 + + Fix broken test for DRI1 in DRI2 conversion. + +commit fca7a4e9a5c73e1c129e94eeccf8fc795f729931 +Author: Stefan Dirsch +Date: Wed Sep 3 15:32:11 2008 +0200 + + Pipe A force quirk for Toshiba Satellite A30. + +commit 57ad9cc689724a2f3583eda862250eab0a6798d5 +Author: Fabio +Date: Mon Sep 1 13:33:50 2008 +0800 + + Man page patch to clarify meaning of VideoRam option with i810/i815 + +commit fd6a9ca5b59a868260eb91272091ea6169091737 +Author: Kristian Høgsberg +Date: Fri Aug 8 15:36:35 2008 -0400 + + Add DRI2 support. + +commit a1c802e4a0324386cf7370594a46354c89e3b646 +Merge: 3733a1b 808b72f +Author: Jesse Barnes +Date: Fri Aug 29 09:23:35 2008 -0700 + + Merge branch 'master' of ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 3733a1b54c95aa378f32577f9e996946e8e8e48c +Author: Jesse Barnes +Date: Fri Aug 29 09:12:05 2008 -0700 + + Fix build when using kernel DRM headers + + Unfortunate mismatch between kernel and DRM master headers. + Kernel: + typedef struct _drm_i915_batchbuffer { ... } drm_i915_batchbuffer_t; + DRM master: + typedef struct drm_i915_batchbuffer { ... } drm_i915_batchbuffer_t; + + so use the typedef rather than the morphing structure name. + +commit bd7ee7fcf51138d21da92a3d8cbaff49871d7188 +Author: Zou Nan hai +Date: Fri Aug 29 11:57:46 2008 +0800 + + [965-xvmc] There is some issue with uv half pixel, remove it till fix + +commit 973a5fb25652a97e28af03295d430a79557be756 +Author: Zou Nan hai +Date: Fri Aug 29 10:59:17 2008 +0800 + + [965-xvmc] some shader optimize + +commit e7379d1c48a522f137cf1a06a334748c88471946 +Author: Zou Nan hai +Date: Thu Aug 28 09:49:57 2008 +0800 + + [965-xvmc] half-pixel bug fix + +commit be49ae6bd683ee9eb778f7ea937aaee4d72c51f0 +Author: Zou Nan hai +Date: Wed Aug 27 11:29:15 2008 +0800 + + [965-xvmc] add missing g4a file + +commit e813b139b7c353a0930c3e00408700619d3949e4 +Author: Zou Nan hai +Date: Wed Aug 27 11:11:41 2008 +0800 + + [965-xvmc] support field prediction and dct type, optimize in GPU + +commit 808b72f81454061c815321e51a9b9f925c4bf786 +Author: Eamon Walsh +Date: Tue Aug 26 22:24:36 2008 -0400 + + Change uxa private keys to integer variables. + + Prepares for a devPrivates system that will store an index. + +commit 62ce9e8f9c8cc2014645d58f4249c496aebc36e8 +Author: Eamon Walsh +Date: Tue Aug 26 22:23:06 2008 -0400 + + Remove unused exa_pixmap_key. + +commit 087ade8e66cf7a34b8a96e1efe438099376cd896 +Author: Robert Noland +Date: Tue Aug 26 16:35:07 2008 -0400 + + Fix typo in last commit + +commit 6404ac178bf2c32a715a66e7fd6ab0184a05af36 +Author: Robert Noland +Date: Tue Aug 26 15:09:47 2008 -0400 + + Check for drm before calling modeset ioctl. + +commit c889198ab54336248a03050ad410254912d79bb7 +Author: Zhenyu Wang +Date: Tue Aug 26 10:12:21 2008 +0800 + + Fix X exit crash in NoAccel + + NoAccel should still be needed for performance evaluation, + so don't crash me when exit. + +commit 0929a191ae36473acb0244a818098e4acf26d675 +Author: Zhenyu Wang +Date: Tue Aug 26 10:01:23 2008 +0800 + + Destroy bufmgr after allocation finish + + Fixed X exit crash for me, allocation reset will + unreference bo which still requires bufmgr to be live. + +commit 94a86fa51a931f0059ea17728f857ec92cec5b16 +Author: Jesse Barnes +Date: Mon Aug 25 16:59:03 2008 -0700 + + Fix UXA build for distcheck + + Was missing proper path info in CFLAGS. + +commit 1c224f72d5f8fa8b6c4d9a6e06698f2462bb43b6 +Author: Jesse Barnes +Date: Mon Aug 25 16:59:03 2008 -0700 + + Fix UXA build for distcheck + + Was missing proper path info in CFLAGS. + +commit 09a235af0f216052d3101b153c18be1fa75abf15 +Author: Jesse Barnes +Date: Mon Aug 25 16:38:17 2008 -0700 + + Update version to 2.4.97 for first 2.5 test release + +commit 8e3243b8e5549033aa2f901a3bdd882418f6a69b +Author: Jesse Barnes +Date: Mon Aug 25 16:37:34 2008 -0700 + + Update version to post-2.5 + +commit 7a5b090abc39c380955489bad5e46d1278f38fee +Author: Jesse Barnes +Date: Thu Aug 21 09:40:57 2008 -0700 + + Hide kernel mode setting EXA code behind XF86DRM_MODE + + Prevents compiler warnings in the non-kms case. + +commit 4937b98981923c599786f5007ab0580ad08e1909 +Author: Jesse Barnes +Date: Thu Aug 21 09:39:33 2008 -0700 + + Fix compiler warnings in VBIOS utils + +commit 08326827fdb8abecbff20c7b051537dbad433c40 +Merge: 5af5041 0de8ca3 +Author: Jesse Barnes +Date: Thu Aug 21 09:30:38 2008 -0700 + + Merge branch 'modesetting-gem' + +commit 5af504166f14f4401818f3b7c27ac2ccba7b9ff5 +Author: Jesse Barnes +Date: Wed Aug 20 15:06:36 2008 -0700 + + Don't disable planes in i830_update_dsparb + + We need to program DSPARB with only one plane enabled at most, and that's + guaranteed to be the case when we're called during mode set, so just assert + that case but otherwise leave the planes alone to avoid flicker on active + displays during output detection for example. + + Fixes bug #17050. + +commit 7b6f4d22211d71480caf6335a3eacaacff369371 +Author: Jesse Barnes +Date: Wed Aug 20 14:40:29 2008 -0700 + + Don't allocate a pipe for hotplug detection + + It shouldn't be needed... + +commit ba4a4b7887d5c2da21cadfeeed601eaec8515550 +Author: Jesse Barnes +Date: Wed Aug 20 14:39:34 2008 -0700 + + Add more panel debugging info to register dump & vbios reader + +commit 0de8ca36306c506356e82d500134b4eeb96a6080 +Merge: f26bcb9 5eccb5e +Author: Jesse Barnes +Date: Wed Aug 20 12:11:00 2008 -0700 + + Merge branch 'master' into modesetting-gem + + Conflicts: + + configure.ac + +commit 5eccb5ec7ea78b5800f98decd4216d39b9ebe5ec +Author: Julien Cristau +Date: Wed Aug 20 15:33:59 2008 +0800 + + Don't skip the checks for DRI headers with --enable-dri + +commit 1baebabc3af9f21a5b8084788ecd88dc66ce78de +Author: Jesse Barnes +Date: Tue Aug 19 16:02:55 2008 -0700 + + Add swf_dumper to .gitignore + +commit f26bcb9cb879e2e9ee2b26c95438cf46286c0208 +Merge: 67ab546 7a1cc48 +Author: Jesse Barnes +Date: Tue Aug 19 15:53:18 2008 -0700 + + Merge branch 'master' into modesetting-gem + + Conflicts: + + src/i830_driver.c + +commit 67ab5462527c5ed94ed073421b60e85a213ea267 +Author: Jesse Barnes +Date: Tue Aug 19 15:46:52 2008 -0700 + + Use GTT mapping for EXA PrepareAccess function + + Makes software fallbacks *much* faster. + +commit 547cf774801bea2177d1224204f7de0dbf6baf3c +Author: Jesse Barnes +Date: Tue Aug 19 15:45:26 2008 -0700 + + Don't allocate EXA offscreen space if kernel mode setting is active + + We'll use GEM alloc & free routines in that case. + +commit 2ddd85f8aef5da1aebbfe9fab510858e7a41860d +Author: Jesse Barnes +Date: Tue Aug 19 15:41:41 2008 -0700 + + Bail out if kernel mode setting is active but DRI fails + +commit 646bbdc4b6a7b887ee8f0e51fdff5d07c4586329 +Author: Jesse Barnes +Date: Tue Aug 19 15:05:00 2008 -0700 + + Add quirk for pre-915s with working PFIT regs + + The regs are undocumented, but on some machines they work fine, so add this + quirk to indicate it. + +commit 7a1cc48276f974d04e1c5ef7c92d98fe5ae9d4fa +Author: Jesse Barnes +Date: Tue Aug 19 10:44:04 2008 -0700 + + Add VBIOS software flags dumper program + + Still need to actually print all the flags & test on various platforms, but at + least the bits are documented now. + +commit 385dc85881c56e218e7d17d7e1d022568aa29cfb +Author: Zou Nan hai +Date: Tue Aug 19 16:27:12 2008 +0800 + + Fix from He Shuang(shuang.he@intel.com), + XvMCDestroyContext to check pointer valid + +commit 3147fa775c7e2a933dc74af1372a3318e77d3218 +Author: Zou Nan hai +Date: Tue Aug 19 16:20:16 2008 +0800 + + Fix from He Shuang(shuang.he@intel.com), + XvMCDestroyContext to check pointer valid + +commit 078a59dd48ed00a6512d155883956c18752da9ce +Author: Jesse Barnes +Date: Mon Aug 18 12:53:33 2008 -0700 + + Remove unused VBIOS flag defines + + We just use the structure definitions now. + +commit 7048141254b7c1948fe77b1742b463f8723610d8 +Author: Jesse Barnes +Date: Mon Aug 18 12:51:31 2008 -0700 + + Pack bdb_general_definitions block + + More correct & consistent with other definitions. + +commit 0e6759bb6ad7293b6447bd20e3d7d8fdee46aba7 +Author: Zhenyu Wang +Date: Tue Aug 19 07:30:01 2008 +0800 + + Fix reverted LVDS bios capability dword definition + + Issue found by Peter Clifton. + +commit 76b5a7ff5c943cfaa254d2fd94b6397c91d1f8e6 +Author: Shaohua Li +Date: Mon Aug 18 11:13:20 2008 +0800 + + [PATCH] avoid duplicate mode set in lvds + + xf86SetDesiredModes() already sets lvds to full mode. later when + xf86CrtcScreenInit() initialized randr12, i830_lvds_set_property will + recall xf86CrtcSetMode and set mode to full. This patch is to remove the + duplication. In my test, this can save about 0.2 - 0.4s x startup time. + +commit b8ee31cd80a945d1fbbfc45234ffe34a109b5717 +Author: Jesse Barnes +Date: Sat Aug 16 12:18:01 2008 -0700 + + Remove last TTM bits + + Makes it build again with drm#modesetting-gem. + +commit 6eb3e0f2f4e43e436029fc82e458ac8de1f94745 +Author: Adam Jackson +Date: Fri Aug 15 15:47:35 2008 -0400 + + Don't touch pScrn->monitor->DDC directly. + +commit ed7269e0a377b3135b06cacecc59119f06958feb +Author: Zhenyu Wang +Date: Fri Aug 15 10:10:43 2008 +0800 + + Always check and free driver private in LVDS destroy + +commit f4cb9a135dca9279af8186a9b18bf62ef7351019 +Author: Zhenyu Wang +Date: Fri Aug 15 10:02:44 2008 +0800 + + Make skip_panel_detect clear for its meaning + +commit 22918f62c89a4314fb5d01c58f22fee5b9a15a27 +Author: Jesse Barnes +Date: Thu Aug 14 16:02:37 2008 -0700 + + Fix pipe A force quirk + + Last commit introduced a logic buglet, we went from (foo & BLAH) -> (!foo & + BLAH) rather than !(foo & BLAH), so fix it up to make my laptop work again. + +commit c1687f9ca9ce7b52043272e877e070c810e6599f +Author: Jesse Barnes +Date: Thu Aug 14 15:48:02 2008 -0700 + + Map/unmap render state only when bo is available + + Otherwise just use the GTT address. + +commit 380c80712f78b3673b64ea07746a8e25e15fba8e +Author: Jesse Barnes +Date: Thu Aug 14 15:39:57 2008 -0700 + + Fixup AccelMethod kernel mode setting code + + Allow UXA or EXA in the kernel mode setting case, defaulting to EXA. + +commit 4475dfb541c988ad19b177e60f31f333e2fb3355 +Author: Jesse Barnes +Date: Thu Aug 14 15:38:07 2008 -0700 + + Use pwrite for cursor updates + + Don't open code map/memcpy/unmap, let libdrm do that for us if necessary. + +commit cb217d4bfd941d0fa9ceae3e483dd1ca1d768e86 +Author: Jesse Barnes +Date: Wed Aug 13 16:55:39 2008 -0700 + + Make EXA & UXA share bo getting function + + Needed for proper acceleration & batch buffer handling. + +commit 1ab7239b73a5e298cadaf44e5605cf05855f08e9 +Author: Jesse Barnes +Date: Tue Aug 12 18:16:37 2008 -0700 + + Map gen4 render state buffer before initializing + +commit 603f48e31b021c4dc0bbf7b5efbb2e68aeb421d5 +Author: Jesse Barnes +Date: Tue Aug 12 18:04:08 2008 -0700 + + Don't set tiling (yet) if kernel mode setting is active + +commit f744aa8d4b22374e1de6dda4facb673c3c428d4d +Author: Jesse Barnes +Date: Tue Aug 12 18:02:21 2008 -0700 + + Don't run old accel init code + + Had the wrong logic. Throw in a couple of cleanups while we're there. + +commit 2321c865f3da9fd321910236a92b32e0af1aa458 +Author: Jesse Barnes +Date: Tue Aug 12 17:59:16 2008 -0700 + + Don't wait for ring if kernel mode setting is active + + We won't have the ring mapped. + +commit a1b334a4c8ae090744e802f8d41a36ea631d6c84 +Author: Jesse Barnes +Date: Tue Aug 12 17:58:29 2008 -0700 + + Update DRM based modesetting support + + Just a checkpoint, still needs a lot of work to properly handle resize, rotate + & cursor handling. + +commit 5d78cf7cf0d23f60e6d61a92cbc2065b440027d3 +Author: Jesse Barnes +Date: Tue Aug 12 17:56:59 2008 -0700 + + Add EXA pixmap management functions for kernel mode setting + + Mostly pulled over from the old kernel modesetting code; a few updates were + necessary. + +commit 9ec36e0c8bd8a4bd7c40569412fc1a21219b5af9 +Author: Olivier Fourdan +Date: Mon Aug 11 12:07:32 2008 -0400 + + Fix DPMS off in the presence of the pipe A quirk. + + Still turn off the VGA plane, and also handle the DRI path at the end. + +commit 445c2e9ef8fc1d49bbb03e07bf36e0339be16a80 +Author: Olivier Fourdan +Date: Mon Aug 11 11:30:51 2008 -0400 + + Apply pipe A quirk to 845 as well. + +commit 915c370964d8dbab48ff24ede2c5e78e7b39132d +Author: Zou Nan hai +Date: Mon Aug 11 15:45:35 2008 +0800 + + [965-xvmc] some fixes for earlier 965 chips + +commit 19ebdf1b24184c0a293a698d44c4e0571109d153 +Author: root +Date: Mon Aug 11 15:31:13 2008 +0800 + + [i965-xvmc] bypass copy when put image with xvmc + +commit d592eabc806b752053ade3c18e9dd8e0f39b45a3 +Author: Zhenyu Wang +Date: Mon Aug 11 15:16:44 2008 +0800 + + Fix possible spurious interrupts in hotplug detect on 4 series chip + +commit d0018a96064ee0adfe87c2d50c341bf7d2e45eb0 +Author: Zhenyu Wang +Date: Mon Aug 11 15:16:09 2008 +0800 + + Disable display clock gating for 4 series chips + +commit 173b909a71955997ed6366e70faebf63fe922a8e +Author: Jesse Barnes +Date: Fri Aug 8 18:11:13 2008 -0700 + + Make it actually build the kernel stuff if possible + + Fixup the kernel stuff to have a slightly better chance of working. Still need + to fixup the EXA pixmap functions. + +commit fe90c0522f65f60c4c431787c889b7fb639ab61b +Author: Eric Anholt +Date: Fri Aug 8 16:35:25 2008 -0700 + + Set lvds_ddc_mode before use to avoid a segfault on mac mini. + +commit b1aef6f63c151dcb202fce869e4b80598b4b2052 +Author: Jesse Barnes +Date: Fri Aug 8 11:54:18 2008 -0700 + + Initial port of kernel modesetting from old intel-kernelmode branch + + Thanks airlied! + +commit 91e7b93c12f612e41b04a2d6106ff29b53b22a43 +Author: Eric Anholt +Date: Thu Aug 7 11:02:19 2008 -0700 + + intel_idle: Instead if #if 0, add an ignore flag for unreliable INSTDONE bits. + + This lets us produce a decent total value, and still show the unreliable bits + in case they aren't on your platform. + +commit f9504eff31eb3c9c6c6b33dced9875866ff8307e +Merge: f911347 5c9a62a +Author: Jesse Barnes +Date: Wed Aug 6 12:40:47 2008 -0700 + + Merge branch 'drm-gem' + +commit 5c9a62a29f62a9ecce37fae98cb01f8217eaba15 +Author: Jesse Barnes +Date: Wed Aug 6 12:39:03 2008 -0700 + + Revert "Switch to using a buffer object for the vertex buffer" + + This reverts commit 1abf4d3a7a203ff5d6e5ceda29573e7fd69ddf8e. + + Conflicts: + + src/i965_render.c - flushing was removed, keep it that way + +commit f91134795b545c8baebf218975b261c76a0e5873 +Author: Zhenyu Wang +Date: Wed Aug 6 16:19:29 2008 +0800 + + Fix SDVO HDMI encoding detect (#16920) + + Check return value of get supported encode command and current + encoding mode, which could be DVI or HDMI. + +commit fc3e287e6b6db21b113aa40ec4d397802c067f8b +Author: Keith Packard +Date: Tue Aug 5 22:50:01 2008 -0700 + + [uxa] Remove unused pixmap size limits. + + All size-related rendering limits should be managed by the driver in the + pixmap_is_offscreen call. There's no need for uxa to even know these values. + +commit 68f0872db6ec4d5dc3b524ee08ecad0aa125acd9 +Author: Keith Packard +Date: Tue Aug 5 22:36:03 2008 -0700 + + [uxa] Check xalloc returns and deal with failure + + Failing xalloc in a rendering function means just dropping the drawing on + the floor (that's what we've always done). + +commit 8f10bfb127bfe73d83d58f1f306fb9a4dfd825d6 +Author: Keith Packard +Date: Tue Aug 5 22:34:24 2008 -0700 + + Use EXA by default instead of UXA until we have GTT mapping + +commit b2d058d80ccd08d9e02ef866ee7a95b58686f6a3 +Author: Keith Packard +Date: Mon Aug 4 23:43:13 2008 -0700 + + Rename uxa using _ instead of caps + +commit fc4d9c55a7fa8001786c1e4da10f005406c57ece +Author: Keith Packard +Date: Mon Aug 4 18:17:20 2008 -0700 + + Change PrepareAccess to take access mode rather than index + +commit c155bb3cb17a3bd3b2e90be52cd1fc90147c4e17 +Author: Keith Packard +Date: Mon Aug 4 04:11:13 2008 -0700 + + Add batch flush in i830_uxa_prepare_access + +commit 66706718553cd272eab6f817b5a059df3e0a4347 +Author: Keith Packard +Date: Mon Aug 4 04:10:21 2008 -0700 + + Add throttling + +commit 12df8f40d2fb41f5446db1b49beeb442da18bee2 +Author: Keith Packard +Date: Mon Aug 4 01:43:44 2008 -0700 + + Use dri_bo for all object allocations, including pixmaps under uxa + +commit 4cc20b7f6e25f4be4598f8edbe0077117126b4ee +Author: Keith Packard +Date: Mon Aug 4 01:42:48 2008 -0700 + + Don't call sync on prepare_access -- just let the driver deal with it. + + Let the driver do whatever sync is necessary from the prepare_access hook + rather than forcing a full sync. + +commit b0b0998b5d52d105eb1e631f688aa8f1bd55ef39 +Author: Keith Packard +Date: Wed Jul 30 16:15:37 2008 -0700 + + Make EXA functions work for UXA as well + + EXA and UXA have the same acceleration interface, but UXA doesn't provide + pixmap stride information as it doesn't manage pixmaps. Move all of that + into the driver structure so that the acceleration functions needn't + reference the EXA structure. + +commit 59774e9aca2d743e82d616bb644d20ff6d60d492 +Author: Keith Packard +Date: Tue Jul 29 22:57:09 2008 -0700 + + Add UXA - the unified memory acceleration architecture. + + This eliminates the cost of EXA migration management while providing full + pixmap allocation control to the driver. The goal is to make something + useful for UMA drivers. + +commit a21d4794b6812ce05d08f06dc47b26c4fb1c1fef +Author: Jesse Barnes +Date: Tue Aug 5 13:37:38 2008 -0700 + + Reorganize VBIOS code + + Make VBT parsing happen at driver init time rather than in each output init + function, to save time and better separate VBIOS code into i830_bios.[ch]. The + changes end up touching the output files due to field name changes, and allow + us to reorder & simplify our LFP mode detection code. + +commit c2f0df4dc97c87539b66525a277c7d1e2c421f61 +Merge: 4f1f308 750bd0b +Author: Jesse Barnes +Date: Tue Aug 5 13:03:46 2008 -0700 + + Merge branch 'drm-gem' of ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel into drm-gem + +commit 4f1f30854260e18b8b9c4103eebbad5dcf729ce6 +Merge: e9e6b47 2aaa207 +Author: Jesse Barnes +Date: Tue Aug 5 13:02:47 2008 -0700 + + Merge branch 'master' into drm-gem + + Conflicts: + + src/i830_driver.c + +commit 1a59cc6b9acf312de1755d67757bf7f1967342e4 +Author: Julien Cristau +Date: Mon Aug 4 12:18:12 2008 +0200 + + Fix up the HP Pavilion ze4944ea quirk + + The chip is 855GM, not GM45. + +commit 27e9506fda86e90fd67de1715fa32d23aaa8a683 +Author: Alan Coopersmith +Date: Thu Jul 31 20:02:21 2008 -0700 + + Man page typo fixes + +commit da2eb83fb9a52291ea98f3285aee7bee2d55e0ca +Author: Jesse Barnes +Date: Thu Jul 31 19:21:36 2008 -0700 + + Update man page + + Add example dual head config, add info on bug reporting. + +commit 2aaa207db2cea03ba05c439b5074807689f2c5be +Merge: 2049ba2 76eb8e6 +Author: Jesse Barnes +Date: Thu Jul 31 13:10:19 2008 -0700 + + Merge branch 'master' of ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + + Conflicts: + + src/i830_display.c + +commit 2049ba211e7cdc383976c09f52c2b43acdd59481 +Author: Jesse Barnes +Date: Thu Jul 31 13:07:20 2008 -0700 + + Update DSPARB while planes are still off + + This avoids the flickering people reported in the 2.4.0 release. + +commit 750bd0bde09adf956c17bbb49c5a6020f12e60a4 +Author: Carl Worth +Date: Tue Jul 29 15:22:39 2008 -0700 + + Call DRM_I915_GEM_THROTTLE from I830BlockHandler + + This prevents the CPU from ridiculously outrunning the GPU. + +commit a893f176dda0b64f7dadfda6bf0331240037851e +Author: Carl Worth +Date: Fri Jul 25 15:56:35 2008 -0700 + + Add call to intel_bufmgr_gem_enable_reuse + + This instructs GEM to reuse buffer objects and improves the + performance of my favorite 'x11perf -aa10text' from about + 169k to about 188k glyphs/sec. + +commit b3c1a148679a4d943e556f996ef6b9004f549a41 +Author: Carl Worth +Date: Fri Jul 25 15:18:28 2008 -0700 + + Eliminate unnecessary flush from i965_composite + + This improves 'x11perf -aa10text' performance from ~144k to ~169k + +commit 1abf4d3a7a203ff5d6e5ceda29573e7fd69ddf8e +Author: Carl Worth +Date: Fri Jul 25 14:48:45 2008 -0700 + + Switch to using a buffer object for the vertex buffer + +commit e5fab0b7681be06a5a3be4bbd769ba5c435e2128 +Author: Carl Worth +Date: Fri Jul 25 13:44:29 2008 -0700 + + Add OUT_RELOC macro and backing intel_batch_emit_reloc function + +commit 76eb8e6f1f0c6962b23550564f4273f392567857 +Author: Zhenyu Wang +Date: Thu Jul 31 16:59:43 2008 +0800 + + Fix SDVO reg definition + + Remove wrong set tv resolution command, adding HDMI regs in dump. + +commit 77ed3d7600c1d92bf4a3ef4f54405cde8c232986 +Author: Zhenyu Wang +Date: Thu Jul 31 13:13:45 2008 +0800 + + Don't program dsparb on new Intel chip + + On new chip, DSPARB is controlled by hardware only. + +commit e9e6b4738573ffa3822ae68088bd53a645eedbce +Author: Eric Anholt +Date: Wed Jul 30 14:15:57 2008 -0700 + + intel-gem: Use new getparam to detect kernel GEM support. + +commit 42fb06f3f14fbec070350cf48361be4a0be0af04 +Author: Tomas Carnecky +Date: Sun Jun 15 14:27:16 2008 +0200 + + Reorder visuals reported by the intel driver + + The root window visual can not be changed. Neither at runtime nor + through the configuration file. The xserver simply selects the first one + that matches the class (usually TrueColor). I need a root window visual + with stencil buffer because my compiz plugin uses the it for some + operations. This patch reorders the visuals that the 3D driver reports + and puts the one with stencil (and depth) bits as first. + +commit 1e90c82161789d1fd50b79db50edb7860b934639 +Author: Julien Cristau +Date: Sun Jul 27 12:07:21 2008 +0200 + + Link with -lm for sin/cos + +commit d77d42e543ee82e801a8563a911826521c0ba557 +Author: Eric Anholt +Date: Sat Jul 26 16:10:05 2008 -0700 + + intel-gem: Give a better error message if the kernel rejects the tiling mode. + +commit 6ac352f146bafe3b4bb5832340eb0ccb730565d2 +Author: Zhenyu Wang +Date: Wed Jul 23 15:10:07 2008 +0800 + + shut up gcc warning + +commit 075cf7fce57da4e51acafb3bfd3d61ba1a8096d5 +Author: Zhenyu Wang +Date: Wed Jul 23 15:07:48 2008 +0800 + + Fix distcheck for clean doltcompile + +commit 29d982c6bf873c6685bd0e395a8b0e5e3b1063e0 +Author: Zhenyu Wang +Date: Wed Jul 23 11:16:14 2008 +0800 + + Fix HDMI output number + + Output 33 is confusing. + +commit fd060ce89d86f6e8ff742d5b287abe8ecea32927 +Author: Zhenyu Wang +Date: Tue Jul 22 15:29:34 2008 +0800 + + Bug #16801: fix X crash when NoAccel on 965 + +commit 577c4d1a0c753fb46d43be05a9781d2e204fac45 +Author: Zhenyu Wang +Date: Tue Jul 22 15:14:14 2008 +0800 + + only check pipe underrun if vtSema is true. + +commit 04bbed2248e3e8f86efd64225abf2db8eb552653 +Author: Zhenyu Wang +Date: Tue Jul 22 15:08:57 2008 +0800 + + SSC is LVDS only + + Fix regression on my 855GM for VGA output. + +commit 7defa4f1f0eba82f39e74f96d2ad7ed2481b537e +Author: Zhenyu Wang +Date: Tue Jul 22 10:51:01 2008 +0800 + + Check underrun on enabled pipe + +commit b7765b0837af4cc80f1257ba04495140ef5d536e +Author: Zhenyu Wang +Date: Tue Jul 22 09:51:54 2008 +0800 + + Thinkpad R60e TV quirk via DMI info + +commit 286ff63f83db8ea16514512385e6f8c6875871ef +Author: Eric Anholt +Date: Thu Jul 17 17:06:28 2008 -0700 + + Don't set up the HWS page in GEM mode now that the kernel manages it. + +commit ed0fbd016b8fbcf01eddfd17fd25e745e7af2ba4 +Author: Jesse Barnes +Date: Mon Jul 21 11:48:38 2008 -0700 + + Add no LVDS quirk for Transtec Senyo 610 mini PC + + Fixes FDO #16757. + +commit 62a037b0585d6ecb43daac9d4eb0927a4618a367 +Author: Eric Anholt +Date: Fri Jul 18 14:50:08 2008 -0700 + + Fix distcheck. + +commit 3cbfc6c76bcd2bc9194a944092f6ce0881ff9da2 +Author: Eric Anholt +Date: Fri Jul 18 14:56:18 2008 -0700 + + Fix uninitialized-use warning in i830_debug.c ring dumping. + +commit 1b1c4975768f63ed0f3933ec384d24c324a383b3 +Author: Eric Anholt +Date: Fri Jul 18 14:53:26 2008 -0700 + + Get prototype for i830_bios_get_tv(). + +commit 978abf84e8cf3ba3e915774981fe03610e15efeb +Author: Eric Anholt +Date: Fri Jul 18 14:50:42 2008 -0700 + + Bump version number past the 2.4 stable branch. + +commit f4ab1f6ad47b8f9a33d45b35c1cb2ba9610b96a6 +Author: Carl Worth +Date: Fri Jul 18 14:31:45 2008 -0700 + + Add intel_statuspage to .gitignore + +commit c0dce28892d7a31ebcca615f87ba8d4fa6872204 +Merge: a6ad504 b8ca1c7 +Author: Keith Packard +Date: Fri Jul 18 10:49:50 2008 -0700 + + Merge commit 'origin/master' into drm-gem + +commit b8ca1c747a679c931267363639fc0bc690cae2d6 +Author: Jesse Barnes +Date: Thu Jul 17 14:41:51 2008 -0700 + + Choose a split for DSPARB based on the configured modes for both planes. + + Previously, we were attempting to give both planes equal space in the FIFO + to be fair. However, larger modes require more fifo space, so split it based + on the relative HDisplay of the modes. This should resolve some fifo underrun + issues with differently-sized displays, or single large ones. + + Bug #16169. + +commit b37a2a8ca82279468e3806dcf77d5fa7bdd0e874 +Author: Jesse Barnes +Date: Thu Jul 17 12:30:57 2008 -0700 + + Don't disable pipe A on 855 chips + + It needs to stay enabled or we may see hangs when trying to re-enable it (say + at VT switch time). + + Fixes FDO bug #15168. + +commit a6ad50402cb879b08de95f94959bb1f59701c1ff +Merge: e9916b9 c4565a9 +Author: Carl Worth +Date: Thu Jul 17 00:38:54 2008 -0700 + + Merge branch 'master' into drm-gem + + Conflicts: + + configure.ac + src/reg_dumper/Makefile.am + +commit c4565a9811487402d899d0933cc63e27ffe1ff08 +Author: Zhenyu Wang +Date: Wed Jul 16 10:45:28 2008 +0800 + + Only initialize integrated TV encoder for mobile chips + +commit bca316863b79148b2f51a97d58b94e52ba3eae9f +Author: Zhenyu Wang +Date: Tue Jul 15 13:35:21 2008 +0800 + + xvmc: use vector based structure + + This is more clear to read MV components. + +commit 0c67219d0e6cfc858af2eb375c2f9473d0f6db60 +Author: Zhenyu Wang +Date: Tue Jul 15 13:29:33 2008 +0800 + + move FBC register dump out of display registers + + This makes it easier to read. + +commit a76ae7cab3001ce6639ae23fb0769c4e46b57e71 +Author: lipeng +Date: Tue Jul 15 10:26:33 2008 -0700 + + Fix GPIO pin usage for DDC on second HDMI port. + +commit 5054a86b1b362f3f63310afb9ef2d37c9f1cfca5 +Author: Eric Anholt +Date: Mon Jul 14 13:43:31 2008 -0700 + + Fix DSPARB setting on 845/865, which have only the AEND field and 96 entries. + +commit 8ac00ca97995e36514ff593fec3c0f0d316ed138 +Author: Julien Cristau +Date: Fri Jun 6 13:40:20 2008 +0200 + + Link the driver with -lpciaccess and -ldrm if needed + + This makes sure the driver ends up with a DT_NEEDED reference to + the libraries it's using. + +commit d61182511b1520b04133d28480e1ffaacbaeb753 +Author: Julien Cristau +Date: Sun Jul 6 12:00:52 2008 +0200 + + Fix gen4asm rule to work with a build dir + +commit 757c00927a6f5760135136450b8d02d0f999ac1c +Author: Carl Worth +Date: Mon Jul 7 15:58:27 2008 -0700 + + Use up to 256 separate vertex buffers + + This allows us to only call i830WaitSync once every 128 calls to composite + rather than on every call. However, we do need to also call MI_FLUSH to + avoid the vertex cache getting in our way, (since our "separate" buffers + are all allocated as one contiguous chunk). + +commit 0c548cd040d0c5e1812470ccdf6de86b6a2926d7 +Author: Carl Worth +Date: Mon Jul 7 14:01:15 2008 -0700 + + Allow for multiple vertex buffers (though only use one for now) + + Using more than one (in the future) will allow for doing less frequent calls + to i830WaitSync. + +commit cc2249333cd462b4d99d110a12c454ca141b2be8 +Author: Carl Worth +Date: Mon Jul 7 13:25:42 2008 -0700 + + Move VERTEX_BUFFERS setup from prepare_composite to composite + + This is in preparation for having larger (or multiple) vertex buffers + in the future. + +commit e9916b9d496fd0b4df717892dda33f81a2e2990a +Author: Eric Anholt +Date: Fri Jul 11 18:59:05 2008 -0700 + + Set tiling state for buffers allocated using GEM. + +commit 3c0f2bcc9965155fecab606edae68874427d3423 +Author: Jesse Barnes +Date: Thu Jul 10 12:57:25 2008 -0700 + + Add VBIOS based TV connector detection + + Now that the VBIOS code supports it, we can use the general features block to + detect whether a TV connector is present on a given platform. + + Reviewed by Nanhai Zou. + +commit e00d9435609bcff1afb71aa6638a6b42a64f5178 +Author: Jesse Barnes +Date: Thu Jul 10 12:55:12 2008 -0700 + + Improve VBIOS feature detection, add SSC support + + Improve the VBIOS feature detection and use it to find whether the platform + supports spread spectrum clocking. Use the specified reference clock, but + disable SSC if multiple heads are active, since it can cause problems in cloned + configurations. + + Reviewed by Nanhai Zou. + +commit 7332132a79e5b5c208d43e93dfe0c8b12eb1728d +Author: Jesse Barnes +Date: Mon Jul 7 10:48:56 2008 -0700 + + Improve FBC size checking + + In hindsight, this is obvious, since nowhere do we tell the FBC unit how much + memory it has available. We need to make sure the compressed buffer is big + enough to handle the uncompresed buffer, both in terms of vertical size and + total framebuffer size, or the compressor could overwrite the memory + immediately following the compressed buffer. + +commit f2ec3fd8f2c63b1bc0745802dcf737eda4bb42b6 +Author: Stefan Dirsch +Date: Thu Jul 3 23:12:13 2008 +0200 + + Add pipea force enable quirk for another 855GM machine. + + Fixes Novell Bug #406123, thanks Christoph. + +commit a34a4e3f6420e2b06bbdaa124fe0ccb1bc6a0bd9 +Author: Zhenyu Wang +Date: Thu Jul 3 01:03:14 2008 +0800 + + Fix official name for GM45 chipset + +commit 6506ac7aa008436158db4f4196802cab462f3446 +Author: Zhenyu Wang +Date: Wed Jul 2 11:12:54 2008 +0800 + + Give asus and eeepc backlight method higher priority + + On #16418, Evgeniy Manachkin reported that + last asus and eeepc backlight patch is wrong, as acpi_video0 method + will take priority and doesn't work. + +commit 55678c64bc6e3ed613ea6db14c105c18a0cf28ce +Author: Dave Airlie +Date: Tue Jul 1 18:51:18 2008 +1000 + + intel: fix drm check. + + The -mm check is broken now that 2.3.1 is out.. make it 2.4.0, to be fixed + with GEM etc. + +commit 0597d94001afe0a9a34104285ce4dffc75b68071 +Author: Roland Test-tools Bär +Date: Mon Jun 30 10:32:42 2008 -0700 + + i810: Remove an effectively unused variable (only used in an incorrect free()) + + Bug #15401. + +commit 37661d916e8384f537d5ed8cbec66a93795c6a05 +Author: Zhenyu Wang +Date: Fri Jun 27 11:21:59 2008 +0800 + + Fix SDVOC typo + +commit 7834a3b118ae4e034f064257762d5c25ada5fe52 +Author: Zhenyu Wang +Date: Fri Jun 27 09:54:35 2008 +0800 + + xvmc: fix motion_type dump for frame/field picture + +commit 989ec9e8a69f909cb64f17e4465982613b4b054d +Author: Zhenyu Wang +Date: Fri Jun 27 09:39:02 2008 +0800 + + xvmc: Don't copy on xvmc surface in PutImage + + As xvmc rendering result has already been in fb, we shouldn't + do extra copy on it. Although special care is required for i915 + xvmc surface pitch alignment, which must be at least 1KB aligned. + So video display function should take it into acount instead of + always setting Y pitch to be double of U/V pitch. + +commit 550082070a3fdb951e3cf08974dc56276c0a739c +Author: Zhenyu Wang +Date: Thu Jun 26 14:22:34 2008 +0800 + + xvmc: enlarge batch buffer size + +commit d50cec6ef9e2178ea663e58d548390f0f3da7692 +Author: Zhenyu Wang +Date: Thu Jun 26 14:20:05 2008 +0800 + + xvmc: only allocate memory requiring physical address on 915G + + Later 945-ish chipset can use graphics address instead. + +commit d1c34d8c0e7ae2a1d952791343e131837fbfda99 +Author: Zhenyu Wang +Date: Thu Jun 26 10:05:21 2008 +0800 + + xvmc: init mc render load indirect command once + +commit 75e38fa8348198ba151afa37e10be3b0b0b468f8 +Author: Zhenyu Wang +Date: Thu Jun 26 09:47:28 2008 +0800 + + xvmc: init dest and reference buffer once + + Init them right after context create, and only update buffer address + info later. + +commit b4d8ca8b38e495b56bb3b4143e5dfe91ee651f15 +Author: Zhenyu Wang +Date: Wed Jun 25 14:27:16 2008 +0800 + + xvmc: init one-time mc context once + + Don't setup one-time mc context everytime, as the content is always + unchanged. And several structs got packed layout inside to ease static + state initialization. + +commit 54f3f528e4804b958936ac773e7a507b2676f815 +Author: Zhenyu Wang +Date: Mon Jun 23 15:51:49 2008 +0800 + + xvmc: environ debug option support + + export INTEL_XVMC_DEBUG=1 + +commit 7a705081788bf957409e17baa5f189241589057c +Author: Zhenyu Wang +Date: Mon Jun 23 15:49:29 2008 +0800 + + xvmc: formalize surface type definition + + We should also carefully select surface type id. + +commit 0283d22f510ba47dfdac2806a58e46649c26580b +Author: Jesse Barnes +Date: Fri Jun 27 13:39:31 2008 -0700 + + Add pipea force enable quirk for HP Pavilion ze4944ea + + Fixes bug #16540, thanks Bryce. + +commit 08903abe4dc0295c7ed7d1ff1a22e0e579540c15 +Author: Jesse Barnes +Date: Fri Jun 27 13:37:10 2008 -0700 + + Add pipe a force enable quirk for Lenovo T60 + + Fixes bug #16494. + +commit 05df8c0b31721a9ccc7215fb1cda1115758367c7 +Author: Hong Liu +Date: Fri Jun 20 10:57:14 2008 +0800 + + Fix SDVO HDMI output. + + While some cards had enough initialized at startup to work already, others + required that the driver actually initialize the required AVI info frame. + +commit 59f39e0ea0ad48c52d9b8f7afb6e04ce95db717e +Author: Jesse Barnes +Date: Tue Jun 24 11:01:46 2008 -0700 + + Remove ErrorF debugging from modeset ioctl + + Oops. + +commit 1056d79809a3765f81113f3988bd948c1f9c673a +Author: Jesse Barnes +Date: Tue Jun 24 10:44:23 2008 -0700 + + Fix back buffer damage handler for 965+ chips + + When page flipping is enabled, we need to make sure any changes to the front + buffer are reflected in the back buffer(s) or corruption might occur at page + flip time. So make the damage handler work on 965 by adding appropriate tiling + flags and pitch adjustments. + +commit 65eee25d7d2ca979205f3776d620dbb36bf68a13 +Author: Jesse Barnes +Date: Tue Jun 24 10:41:46 2008 -0700 + + Add support for keeping vblank counters sane across mode setting + + The DRM supports disabling of vblank interrupts when not in use, but in order + to function properly it must also be aware of mode setting, which will reset + the frame counter to 0. Add code to call into the DRM before and after mode + setting, so that it can account for any lost vblank events. + +commit 277632d8c37cf43c7c1178ae7d5a2e6d5705968c +Author: Zou Nan hai +Date: Tue Jun 24 16:43:40 2008 +0800 + + 965 xvmc, current only frame based DCT_type support + +commit 9d7929436488969ca4fd1fef4d2e92be5e1a93aa +Author: Keith Packard +Date: Fri Jun 20 00:23:45 2008 -0700 + + Flush pending batch in block handler + + Make sure any pending rendering commands are delivered to the hardware + before the server goes to sleep. + +commit 2f8a0aa8cd24ede824aa52102b45a295f1b6b5be +Author: Keith Packard +Date: Tue May 20 20:29:25 2008 -0700 + + Remove some unreliable regs for i915 + +commit 6b6be2b2a7179c1c9fa12989e16076aae105f4e2 +Author: Eric Anholt +Date: Thu Jun 19 15:01:00 2008 -0700 + + Fix a crash in i830_sdvo_init error paths by setting up dev_priv earlier. + +commit 65ad29d78793c7804f133a58de80ffaa0404ca28 +Author: Eric Anholt +Date: Thu Jun 19 14:27:30 2008 -0700 + + Automatically detect the presence of HDMI. + + Now, SDVO is only probed if the SDVO detected bit is set. If the SDVO probe + fails, but the detect bit is set, assume that it's an HDMI output. + +commit ea0d21006ec71bc56acde7291e5f8d28e54b83fe +Author: Eric Anholt +Date: Thu Jun 19 14:10:29 2008 -0700 + + Fix hdmi POSTING_READ to use the register number instead of the register value. + + We won't dwell too long on how this ever worked. + +commit 2fa9240a3b685a0c3d0e2644fc144c927b67b6b3 +Author: Eric Anholt +Date: Thu Mar 20 15:14:46 2008 -0700 + + Get HDMI output working. + + HDMI, despite claiming to have pixel multiply support, actually doesn't + want it, at least in the way that SDVO did. Disable it. + + Also disable the NULL_PACKETS_DURING_VSYNC bit. Despite the docs telling us + to set it, the output doesn't like it when you do that, and the BIOS doesn't + set it. + + Also add a posting read to SDVOx setting. Without it, half the X starts + wouldn't get anything on the screen. (interestingly, it was every other + startup, not just a chance). + +commit dc8ab9d35b261b6105a62949cfb47a3554531d0b +Author: Eric Anholt +Date: Thu Mar 20 13:49:47 2008 -0700 + + Set the sync active bits like we're supposed to, matching the BIOS. + +commit af13826ed063b60a1e4179101e8889b4ab7a9d0b +Author: Eric Anholt +Date: Mon Mar 10 11:51:05 2008 -0700 + + Add pixel multiplier support for HDMI + +commit 9a05662918223477eb1cf6f80ffac08712721c70 +Author: Eric Anholt +Date: Mon Mar 10 11:47:15 2008 -0700 + + The phase shift its are now reserved, and add HDMI clock limits. + +commit beba1dd3561e38573ed9f507328caf7f8fb9f84a +Author: Eric Anholt +Date: Thu Mar 6 16:05:17 2008 -0800 + + Initial HDMI work. Not currently hooked up at startup. + +commit da58dc3b02999f3244d0eaf77180b828d85bd609 +Author: Eric Anholt +Date: Thu Mar 6 14:57:57 2008 -0800 + + Add DisplayPort registers. + +commit 52a414d1158aa7512fb79560dc220e2a78456a2d +Author: Eric Anholt +Date: Thu Mar 6 14:00:18 2008 -0800 + + Remove VGA regs from debug output. + +commit b60bbbfd7b7dcf31726ad615a493f34f17cc6309 +Author: Eric Anholt +Date: Thu Mar 6 13:59:06 2008 -0800 + + Add little hotplug detector app. + +commit 64fa32e2eba21cb94aa0f8d87a6ee6b7c178a7a5 +Author: Zhenyu Wang +Date: Thu Jun 19 11:02:29 2008 +0800 + + Add backlight kernel method support on Asus and Eeepc + + Noted and tested by Evgeniy Manachkin + for asus-laptop support, also add eeepc support. + +commit 1cfe769c74d1a3a392bf1aaaf5c2dcc8273daf66 +Author: Zhenyu Wang +Date: Tue Jun 17 12:39:28 2008 -0700 + + Add support for Intel 4 series chipsets. + +commit 289790c0467d27e96b537598a6589fc6a36da8b8 +Author: Zhenyu Wang +Date: Tue Jun 17 09:46:12 2008 +0800 + + Fix compiling with server master in LVDS backlight patch + +commit 66418cc99cfd360e303efcdf74a9ee31d435ff15 +Author: Zhenyu Wang +Date: Thu Jun 12 14:04:41 2008 +0800 + + Fix compiler warning when disable xvmc config + (cherry picked from commit df0bbdc7cbb6ff357a81ed28d12e56c9c7d643f7) + +commit 078d05865884ca5784b532c0a79c8440632002ac +Author: Shuang He +Date: Mon May 26 09:20:53 2008 +0800 + + Fix typo in xvmc block destroy + (cherry picked from commit 87ace420a34df7425641d089f71830e44fced098) + +commit 4c4ef27779aebf4df90b6233de05be2bb972de4c +Author: Lukas Hejtmanek +Date: Mon Jun 16 02:49:41 2008 +0800 + + Fix maximum backlight issue + +commit d775ddc64dc8349b8ef9e85b0be9e93cb1997fea +Author: Eric Anholt +Date: Fri Jun 13 10:03:24 2008 -0700 + + [gem] Catch -EINTR from blocking GEM ioctl and restart. + +commit 02d7141ac395446613edba0f2e2a951e750e4e9f +Author: Dave Airlie +Date: Fri Jun 13 11:30:58 2008 +1000 + + [gem] remove one more unused bit + +commit f07acbdaac95931d184ea2c557edb632e577eb47 +Author: Eric Anholt +Date: Thu Jun 12 13:47:35 2008 -0700 + + Require libdrm 2.4.0 always since we need the bufmgr code. + + This lets us remove a lot of conditional compile stuff in the DRI case, as + if we're doing DRI and have 2.4.0, we can rely on GEM ioctls existing. + +commit 754df0aa55c4b5f0c3c415ad97d7612504410229 +Author: Eric Anholt +Date: Wed Jun 11 14:43:38 2008 -0700 + + [gem] Chase move of create ioctl from generic to device-specific. + +commit 339f00e340c3a9c8ac8f17147e37906494ef370b +Author: Eric Anholt +Date: Tue Jun 10 16:14:06 2008 -0700 + + [gem] Don't set up the ring in GEM mode, as that'll be handled by the kernel. + +commit e930c0dc5b5f98d256a4167ed70ba813c88924d2 +Author: Eric Anholt +Date: Sat Jun 7 13:57:59 2008 -0700 + + Use bufmgr_gem when available instead of the fake bufmgr. + + This is a bit unstable still sometimes. + +commit ecf19e1cda60a938d41413075ae6e00f24e0ec1a +Author: Eric Anholt +Date: Fri Jun 6 15:27:44 2008 -0700 + + Change most usage of pixmap offsets to using a reloc macro. + + This is based on airlied's RING->BATCH commit. The 965 code still needs to + be fixed up for relocations. + +commit bade7d7d2505a10a8a7d24b084aff9742e2d6d64 +Author: Eric Anholt +Date: Fri Jun 6 14:03:25 2008 -0700 + + Use the DRM for submitting batchbuffers when available. + + There are some concerns with this, as the DRM will be setting the nonsecure + flag on the batchbuffer, and the server may be submitting some secure-only + commands. It appears to work on the 915GM test system currently. + +commit 6e94affcc2240e668bcf1aa41f3c8b19929d144b +Author: Eric Anholt +Date: Fri Jun 6 14:01:05 2008 -0700 + + Avoid needless flush emits in the blockhandler. + + The EmitFlush in i830_dri.c was added as a pageflipping workaround, and was + noted to not even be sufficient then. There's no reason for it to be there, + so it's removed. After that, we just have to not emit an MI_FLUSH if we + already had, and cursor movement no longer bashes memory manager. + +commit b2216e7bc2f1a35f9fc1794bad83208cd5c583d1 +Author: Eric Anholt +Date: Wed Jun 4 16:31:16 2008 -0700 + + Use batchbuffers instead of ring emits for general commands. + + The batchbuffers are managed using libdrm and bufmgr_fake, and dispatched from + the ring from userland. + +commit d0fda9d24c5fe4870cdbd2ba0213091165666a8e +Merge: cc98d41 79f94ee +Author: Eric Anholt +Date: Tue Jun 10 11:32:49 2008 -0700 + + Merge branch 'master' into drm-gem + +commit 79f94ee3c4652019395b9c329d94f7779c558571 +Author: Eric Anholt +Date: Tue Jun 10 11:31:22 2008 -0700 + + Set up/restore PWRCTXA from enter/leavevt not server start/exit. + + This should improve behavior in the presence of VT switching, but also avoids + a crash on X exit from writing the register after unmapping mmio. + +commit 231a302013981cc597ba09ee89b367c8ab56e8ba +Author: Bryce Harrington +Date: Tue Jun 10 14:10:39 2008 +0800 + + Two more Dell quirks + + fd.o #16160 + +commit cc98d41df63f1ee2561440fab3aa471a80a12920 +Author: Eric Anholt +Date: Mon Jun 9 12:00:14 2008 -0700 + + Add a little program to dump out the first 64 dwords of the status page. + +commit 1142be53eb8d2ee8a9b60ace5d49f0ba27332275 +Author: Jesse Barnes +Date: Mon Jun 9 08:52:59 2008 -0700 + + Fix TV programming: add vblank wait after TV_CTL writes + + Fxies FDO bug #14000; we need to wait for vblank after writing TV_CTL or followi + ng "DPMS on" calls may not actually enable the output. + +commit 64a8f2433d7774d06119793b57cec6d3be6389c1 +Author: Robert Lowery +Date: Tue May 20 21:09:23 2008 +1000 + + Fix TV out connection type detection + + Make sure we wait for vblank when using the TV DAC to detect the connection + type. + + Fixes FDO bug #14000. + +commit a993a8f3ce3a2079c5b5ebaca2ec2564047d7d4e +Author: Tomas Carnecky +Date: Fri Jun 6 10:03:23 2008 +0800 + + Fix compile error in LeaveVT + +commit 432d07fb175b385715eb3ccf97a303d2ad7bfe11 +Merge: 3a967b8 bff180e +Author: Eric Anholt +Date: Thu Jun 5 14:57:18 2008 -0700 + + Merge branch 'master' into drm-gem + +commit bff180e6cac4452ef491c81855eb12bfa03d0bf3 +Author: Eric Anholt +Date: Thu Jun 5 14:55:23 2008 -0700 + + Move debug clock printout from ErrorF to X_INFO. + +commit ad459b21b7de4a79552ac155803d5930432fb84b +Author: Eric Anholt +Date: Thu Jun 5 14:37:59 2008 -0700 + + Remove SVG_WORK_CONTROL init. + + The bit set is now reserved -- used to be a workaround for early revisions. + +commit e41dc98a0aeec389b221038753056c725ecee1c5 +Author: Eric Anholt +Date: Thu Jun 5 14:37:26 2008 -0700 + + Initialize clock gating from EnterVT and save/restore it appropriately. + +commit 8061e5ac27a5f61f940bccc940be922999cc1d3f +Author: Eric Anholt +Date: Thu Jun 5 14:09:45 2008 -0700 + + Move BIOS scratch register setup to EnterVT instead of PreInit. + + We want these to always be set when our driver's in control. They are + already appropriately save/restored at leave/entervt. + +commit b61cb9283185eb5211e84eb7d8e68beea607c2eb +Author: Eric Anholt +Date: Thu Jun 5 13:57:54 2008 -0700 + + Remove gratuitous wait_ring_idle after I830Sync. Syncing implies that. + +commit b65f67b74ff99aea1490d52f170ef4fe80cef6c7 +Author: Eric Anholt +Date: Thu Jun 5 13:40:55 2008 -0700 + + Move the remaining two lines of SetHWOperatingState to the caller. + +commit adb4f5a5e826e584ab212d23fc8d474c3e7bb8e8 +Author: Eric Anholt +Date: Thu Jun 5 13:39:08 2008 -0700 + + Remove duplicated i830_stop_ring()/SetHWOperatingState() in EnterVT(). + +commit c2e2fe48113667c683c6e1e9b1237635c41c61c3 +Author: Eric Anholt +Date: Thu Jun 5 13:21:55 2008 -0700 + + Move DSPARB setup into a separate function, and save/restore it at VT switch. + +commit 7e51384c973a96366b02ea646392c43574674111 +Author: Eric Anholt +Date: Thu Jun 5 11:56:42 2008 -0700 + + Replace a couple of wait-for-ring-idles with a single function to do so. + +commit 65306cdd71dad71e4ca7229764f81a0880dd70bf +Author: Eric Anholt +Date: Thu Jun 5 11:26:02 2008 -0700 + + Just remove the mprotect kludge. + + Besides not being #ifdef __linux__ed as requested, some linux kernels break + in exciting new ways when you try to mprotect from PROT_NONE back to + PROT_READ|PROT_WRITE. Yes, there are bugs in the code we're calling in a + bug-exploiting bug workaround. + + If you want this workaround for the original bug exposed when moving to + libpciaccess, it's already in libpciaccess. + +commit beb72ae5aa053303f5cc419e9c9d7c6db964f160 +Author: Hong Liu +Date: Wed Jun 4 16:58:05 2008 +0800 + + Set SDVO sync polarity to default on 965 + + Fix fd.o bug 15766 + +commit c7fee208fd46e143965ea173984d284e1eec2a9b +Author: Hong Liu +Date: Wed Jun 4 16:56:50 2008 +0800 + + Fix DSPARB change on 965G + + From the spec, only 965GM and IGD_GM have 128 FIFO entries. + With DSPARB change introduced by commit bd137a, I've got PIPE B + underrun when dual-headed on G35 platform. + +commit 64ccc8a036a1d80fc918e9b124d24ce0d26bdbbb +Author: Zhenyu Wang +Date: Wed Jun 4 22:30:04 2008 +0800 + + xvmc: add render dump function + +commit 1729a4f29dd52346a9fa997f818d57884047657f +Author: Zhenyu Wang +Date: Wed Jun 4 22:25:39 2008 +0800 + + xvmc: move block size lookup helper to generic + +commit 3cc8876db7ba82fa18e8fab4f267ac6e87964c47 +Author: Zhenyu Wang +Date: Tue Jun 3 16:15:36 2008 +0800 + + xvmc: a little cleanup + + Also safe check context size to not exceed surface max. + +commit 96955003557686469c7ae9f7d42620d2851e6fad +Author: Zhenyu Wang +Date: Tue Jun 3 16:13:52 2008 +0800 + + xvmc: remove unused dri drawable + +commit bd137a19dc29dd466eac030e040f729ed0807e3f +Author: Jesse Barnes +Date: Wed May 28 15:47:47 2008 -0700 + + Fixup DSPARB for 855 & 945 + + It turns out 855 has a different DSPARB layout than 915+. And 945+ have more + FIFO entries, so we have to allocate things differently. So on 855 split the + FIFO evenly again between A & B planes, and do the same on 945, where we have a + larger FIFO. Fixes an issue reported by Daniel Stone with the previous default + value. + +commit 3a967b8359bd6c05a10111076cdb02df15cbf2e8 +Author: Eric Anholt +Date: Mon May 12 13:51:11 2008 -0700 + + [gem] Note if pinning a buffer fails. + +commit 363ccc3dfbf8ab91608d502e0376a43653581856 +Author: Jesse Barnes +Date: Mon May 26 09:43:40 2008 -0700 + + Fixup FIFO comment + + What I originally checked in was a bit misleading. + +commit 2e1425246ccc75216247b0c2fa6fce2635db472b +Author: Jesse Barnes +Date: Mon May 26 09:40:10 2008 -0700 + + Handle display FIFOs better + + Add some debug code to catch FIFO underruns, which are normally bugs (unless + they occur during mode setting) and remove any plane C FIFO allocations, since + we don't use that plane at all. We may eventually need to be a little smarter + about this on platforms that use plane C for the popup. + +commit 89bb53cc7a853d88fc34a0ca65ae2b6227a8dd24 +Author: Jesse Barnes +Date: Mon May 26 09:34:34 2008 -0700 + + Fixup power saving registers + + Update clock gating disable bits to match docs and allocate a power context + memory area so that newer chips can save state and power down the render unit. + +commit ced4b4bb0c44b55feb5e32ddb860f1c1dc3bbde5 +Author: Eric Anholt +Date: Thu May 22 22:10:25 2008 -0700 + + [gem] Reduce console spam from debugging. + +commit 165c0865d849b7d280a3a119fe9ae0ad34637df0 +Author: Alan Coopersmith +Date: Wed May 21 14:56:27 2008 -0700 + + Define DEFFILEMODE for OS'es that don't have it + +commit 71180653825a1b141a08590e4b767d33d9b5d8c1 +Author: Jesse Barnes +Date: Wed May 21 11:51:55 2008 -0700 + + Revert "Disable FBC by default on 965GM" + + This reverts commit 53e3693ef13f31f3fc33bcff7286ab2b03b2d430. + + Conflicts: + + src/i830_driver.c - default FBC on for 965+ + +commit 740a73dad1d9a9b0ebf1cc7d6f2a056abad57aaf +Author: Zhenyu Wang +Date: Tue May 20 08:54:01 2008 +0800 + + Revert "Add FIFO watermark regs to register dumper" + + This reverts commit 0c00a638ef57aa9d6a3047176b0bfad733f781f0. + + Those FIFO watermark regs are 945-ish, and cause problem + on G35. + +commit c81050c0058e32098259b5078515807038beb7d6 +Merge: 9c9a5d0 e9532f3 +Author: Keith Packard +Date: Sat May 17 23:26:14 2008 -0700 + + Merge commit 'origin/master' into drm-gem + +commit 9c9a5d0e48c6e911574695fc417d2dc1a0fd1c20 +Author: Keith Packard +Date: Tue May 13 12:24:50 2008 -0700 + + Add check for GEM, use that to enable driver GEM support + +commit e9532f3abf1e0b62b2569d4aae60a5a63add571f +Author: Rémi Cardona +Date: Wed May 14 14:52:37 2008 +0800 + + Add glproto to DRI dependencies + +commit fe455a38cbac8d47a5c82b3eeb3cc6a59a6e8443 +Author: Eric Anholt +Date: Tue May 13 11:56:10 2008 -0700 + + Formatting fixes for intel_idle. + +commit 5c1720ecbc5528c40bb48084dc68ef233e9bb43b +Author: Eric Anholt +Date: Mon May 12 16:48:05 2008 -0700 + + Add i915 support to intel_idle. + +commit 089011daf3da8db3bd16d50e1d6a6457da82300e +Author: Keith Packard +Date: Mon May 12 12:18:19 2008 -0700 + + Track name changes in GEM ioctls. + + allocate → create + unreference → close + name → flink + +commit 10f1d835b8ac7bf3153ac39d295ad2a72c4aa076 +Author: Keith Packard +Date: Mon May 12 12:15:09 2008 -0700 + + Record alignment requirements in mem structure for use by GEM. + + GEM needs memory alignment requirements sent at pin time, which is a bit + after the allocation itself. Store the required alignment in the memory + object for later use by pin. + +commit 5103e5a39a4869a714b8a59da8bf51ecc8c65e4f +Author: Jesse Barnes +Date: Mon May 12 10:58:24 2008 -0700 + + Panel fitting: fix letterbox modes + + In full_aspect mode, we try to preserve the aspect ratio by adding + either top & bottom or left & right borders. In the letterbox case (top + & bottom borders) we were miscalculating the top border which led to + programming a bad mode. Fix the calculation and bug #15559. + +commit f280c50dd5d29c5717adc6da2368363cb3d0adbb +Author: Zhenyu Wang +Date: Mon May 12 08:57:56 2008 +0800 + + Revert last HP 965GM pipe A quirk + + Seems not resolve the issue (fdo bug #15885). + +commit d91d9e6a2f2ba18b35cb6fd7bc3fe8bc617eb44f +Author: Bryce Harrington +Date: Sat May 10 07:58:59 2008 +0800 + + More Pipe A force quirks + +commit 548d4c0f979a72eac5d0c9c76da12f0bd05e64e1 +Author: Zhenyu Wang +Date: Thu May 8 12:43:30 2008 +0800 + + Fix i965 render getting dest format error + + Depend on value returned by function within assert is wrong. + Fixed weird render corrupt on i965. + +commit 9f324860431ff8199a78d19bbaa74046e1476b89 +Author: Mike Isely +Date: Thu May 8 10:00:17 2008 +0800 + + Implement option to ignore external fixed mode settings + + The Intel xorg driver tries mightily to determine the native fixed + panel mode settings for the LVDS output. It does this through various + means, including scanning video BIOS tables, and noticing if the pipe + in question has already been set up by somebody else (and adopting + those timings). This strategy works well for say a laptop where the + LCD panel is an integral part of the machine. But for other + applications where the display is unrelated to the system's BIOS or + other software, then the BIOS will likely have no clue how to + configure the LVDS output. Worse still, the BIOS can simply "get it + wrong", leaving the pipe misconfigured. Unfortunately the Intel + driver can potentially notice this, adopt the same settings, leaving a + messed up display. + + All of this complexity normally happens independently, behind the + scenes, from the mode timings that might otherwise be specified by the + user. This driver has a concept of fixed, i.e. "native" mode, and + then user-specified mode. If the corresponding resolutions between + those concepts don't match, then the driver in theory will arrange for + scaling to take place while adhering to the actual native mode of the + panel. Said another way, if the user says 800x600 but the driver + mistakenly (see above) thinks the native mode is 640x480, then 640x480 + is the mode set with scaling to an 800x600 frame buffer. If the + driver gets the wrong native mode, then the result is a miserable mess + with no way for the user to override what the driver thinks is right. + + This patch provides a means to override the driver. This implements a + new driver option, "LVDSFixedMode" which defaults to true (the normal, + probe-what-I-need behavior). However when set to false, then all the + guessing is skipped and the driver will assume no fixed, i.e. "native" + mode for the display device. Instead with this option set to false, + the driver will directly set the timings specified by the user, + providing an escape hatch for situations where the driver can't + correctly figure out the right mode. + + Under most scenarios of course, this option should not be needed. But + in situations where the Intel video BIOS is hopelessly fouled up + related to the LVDS output, this option provides the escape hatch for + the user to get a working display in spite of the BIOS situation. + + Signed-off-by: Mike Isely + +commit 33f033cbf346c13a687e469e8879579fcd5bb2fb +Author: Jesse Barnes +Date: Wed May 7 14:46:52 2008 -0700 + + Save/restore cursor registers + + There are lots of good reasons for doing this, one of them is fdo bug #11305. + +commit a7188b1f2dd9a69fa7daefe478d283735226f9f3 +Author: Zhenyu Wang +Date: Wed May 7 14:21:59 2008 +0800 + + Use I830FALLBACK when check pitch for debug + +commit 79fde3ad7a949fb7f0dc9907cb6eea6ca9a910ae +Author: Zhenyu Wang +Date: Sat Apr 19 08:54:38 2008 +0800 + + Check pitch for EXA operation + + 2D pitch limit applys to all chips. Pre-965 chip has + 8KB pitch limit for 3D. 965 supports max pitch by current + exa (128KB). + (cherry picked from commit 8187a5a16f8bd8f0ba5e7f5357f355928b3b8f07) + +commit 36ec93300926084fb2951d69b001e4c67bc6ff79 +Author: Eric Anholt +Date: Tue May 6 18:48:20 2008 -0700 + + Bug #15807: Fix use of the ring while VT-switched, hit by fast user switching. + + The fix for flushing at blockhandler with no DRI on 965 was broken and would + try to flush the chip even when the driver wasn't in control of the VT. + Hilarity ensued. + +commit 0c00a638ef57aa9d6a3047176b0bfad733f781f0 +Author: Jesse Barnes +Date: Tue May 6 14:38:48 2008 -0700 + + Add FIFO watermark regs to register dumper + +commit c81a4687fca80bf7367d7f0e9a00a6a09737c5bb +Author: Zhenyu Wang +Date: Tue May 6 13:52:22 2008 +0800 + + Only check xvmc lib when xvmc is enabled. + + Don't check xvmc lib if user has already wanted to disable it. + Fix fdo bug #15762. + +commit be746a90a87d7a9807fa4243493e7e4d48f7f1c0 +Author: Bryce Harrington +Date: Tue May 6 13:51:46 2008 +0800 + + More quirks from ubuntu/dell + +commit 417f86d80525d2f5038628afba8f70f8c0fecca3 +Author: Keith Packard +Date: Mon May 5 13:36:19 2008 -0700 + + Move a declaration under #ifndef HAVE_FREE_SHADOW + +commit 587dc5bfc4ef32942bd7511f932a3a2e2fcdccb0 +Author: Keith Packard +Date: Mon May 5 13:35:22 2008 -0700 + + Fix up ring dumping code for non-i965 + +commit 65877d32bb2cd71ccc8d6a66244f029fc3577f69 +Merge: b9d12da fff17b9 +Author: Keith Packard +Date: Mon May 5 12:05:00 2008 -0700 + + Merge branch 'master' into drm-gem + +commit b9d12da91eb1afb05bd78a40e15f4333e697093d +Author: Keith Packard +Date: Mon May 5 10:44:09 2008 -0700 + + Use GEM for buffer naming now. + +commit 0741020f3725c32c48ad15535b9c0549e4092c23 +Author: Keith Packard +Date: Mon May 5 10:17:01 2008 -0700 + + Set pin alignment for gem on non-965 + + non-965 tiled frame buffers have fairly strict alignment requirements, 512K + on 8xx and 1MB on 9xx, plus they must be aligned to the size of the + allocation. + +commit 271abfd0ec29851273d8ca5241d963be5c64e43c +Author: Eric Anholt +Date: Fri May 2 10:06:13 2008 -0700 + + Add initial GEM hacks to bring the server up. + +commit a0ced923bb793aa22e6bfbeeec0888d3b42ce176 +Author: Jesse Barnes +Date: Tue Apr 29 13:19:02 2008 -0700 + + Add a new quirk for BIOSes that reprogram regs at lid close/open time + + Dell Latitude D500s seem to have this problem. At lid close/open, the DSPABASE + reg gets reset to 0, so we either need to keep the framebuffer at offset 0 or + make sure we reprogram the CRTCs after the lid opens again. Since we can't + make sure the former is always true (buffer resize, etc.), this patch adds a + quirk to reset the modes at lid open time. + + Fixes FDO bug #14890. + +commit fff17b9d1b58cb53032d153094826dd306836d59 +Author: Keith Packard +Date: Tue Apr 29 10:32:14 2008 -0700 + + Use new xf86RotateFreeShadow function to clean up shadow buffers. + + This simply moves code from the driver up into the X server; use it where + available. + +commit 1d467a8038946a37844795e8860be113d43219ac +Author: Keith Packard +Date: Wed Apr 23 11:08:38 2008 -0700 + + Overlay video doesn't require that the target pixmap be in video memory. + + I830PutImage was checking to make sure the target pixmap resided in video + memory, but this isn't necessary when using the overlay. Test + +commit 40e0a03af57d7b3180d7066bcb15e03dcc9ca295 +Author: Keith Packard +Date: Mon Apr 21 01:03:22 2008 -0700 + + Dump batch buffers found from main ring + +commit c8ae3b781f0d8e325876a74c91cd0a685d34454b +Author: Keith Packard +Date: Sun Apr 20 02:11:15 2008 -0700 + + Add a bunch of 965 ring stuff to the debug dump + +commit 2c135ef8ac40f8e7cd071de7414adfae019f9198 +Author: Eric Anholt +Date: Wed Apr 16 21:39:58 2008 -0700 + + Make the binding table and surface state be arrays to reduce syncing. + +commit c3fb62df4e60b63295f94c99b3c5de70dbf94e1c +Author: Keith Packard +Date: Thu Apr 17 10:04:55 2008 -0700 + + Add a kludge-around to fix cd/wt bits in fb ptes on linux. + + Mmap from /sys/devices/pci* on linux forces the cache-disable and + write-through bits, which turns our write-combining map into an + uncached-map, seriously impacting performance. It turns out that a bug in + mprotect allows us to fix this by disabling access to those pages and then + immediately re-enabling them. + +commit 0ae283582d21776d3317d5fc1c25751d50d562c7 +Author: Hong Liu +Date: Thu Apr 17 10:57:34 2008 +0800 + + fix possible segfault in I830FreeScreen + + pI830 may point to NULL if I830PreInit fails + +commit 7008eac855302fd467e001495483c2dccfddf68f +Author: Eric Anholt +Date: Wed Apr 16 12:09:41 2008 -0700 + + Update dolt from git, fixing fallback to libtool. + +commit 23d1df22d177e54bfc46304053d8115047ff85d4 +Author: Eric Anholt +Date: Mon Apr 14 16:46:17 2008 -0700 + + Abstract surface setup into a separate function. + +commit e27ce4238f748d024635835824c120eb298b84b2 +Author: Eric Anholt +Date: Mon Apr 14 23:30:21 2008 -0700 + + Move the vertex buffer to the state structure as well. + +commit 69709fe36cfdb59c140f5cba233dcb606f8dbc85 +Author: Eric Anholt +Date: Mon Apr 14 18:34:13 2008 -0700 + + Move the binding table for 965 to the state structure. + +commit 049d057dfd73b6c191a8ba5d73eddb77cf7748e7 +Author: Eric Anholt +Date: Mon Apr 14 17:09:22 2008 -0700 + + Move the 965 static variables local to the function they're used in. + +commit 092962c962fdf3e33a8d387221448fe7c8c36376 +Author: Eric Anholt +Date: Mon Apr 14 14:02:58 2008 -0700 + + Make the VS unit state static for 965 render. + +commit 4bbdd7096d4927fe48673006fff7df922972f116 +Author: Eric Anholt +Date: Mon Apr 14 13:53:36 2008 -0700 + + Rename some variables in i965_render.c for clarity. + + The gen4_render_state is now always called "render_state" (i965_render.c + bookkeeping) and gen4_state_t is now always called "card_state" (the buffer + for state used by the chip). + +commit 456bb529335c28cf60f3b6e5900b804efa5c185a +Author: Carl Worth +Date: Fri Nov 9 17:24:21 2007 -0800 + + Associate one sf_state object with each sf_kernel + + (cherry picked from a2b5c23184d19b386fdfd04f578a55566df60132 commit) + +commit 90d6b178473ba32cf66e6e654e608cb4374e4a19 +Author: Zhenyu Wang +Date: Mon Apr 14 16:31:03 2008 +0800 + + Change default panel fitting mode to origin + + i8xx currently only works in FULL mode. + (cherry picked from commit 33ffd781bbca3d0dee8c1b47e7b90be5824b9a4f) + +commit c1ad0a1a344a87a537aa5f93f6c774997a3189e4 +Author: Zhenyu Wang +Date: Mon Apr 14 10:02:00 2008 +0800 + + Remove old sf/wm program from Makefile + + Fix distcheck + (cherry picked from commit 1d8383923bebf38ab8ada6a262cb4fc8c30e074a) + +commit 18ef4158e5574bfc6621b268821532f13e261d13 +Author: Keith Packard +Date: Sun Apr 13 21:37:49 2008 -0700 + + Only use FOURCC_XVMC when INTEL_XVMC is defined + + The XVMC code uses a magic FOURCC code to signal frame updates, but that + code is only defined when the XVMC code is used. + +commit 269809030ee9d08b56ad0178a7a9c0194e25785e +Author: Keith Packard +Date: Sun Apr 13 12:47:02 2008 -0700 + + Move wm_scratch first to meet alignment requirements + +commit 08d3206f3b891e611e3e16c9eb79cfca21ab8a51 +Author: Keith Packard +Date: Sun Apr 13 12:35:14 2008 -0700 + + Kludge to make planar video work - duplicate sampler state + + This patch duplicates all of the surface sampler state needed to read from + the separate YUV surfaces and then has the planar sampler read from samplers + 0, 2, 4 instead of 0, 1, 2. This appears to make things work, instead of + having the samplers break at random. I do not understand why this works. + +commit 6366e4de540c4713cbc8402c89516464bbdc35b9 +Author: Keith Packard +Date: Sat Apr 12 16:39:00 2008 -0700 + + Skip copying on FOURCC_XVMC surfaces + +commit 0fec42b64ee529eb7ec15febdaa5e4986ec1ab17 +Author: Keith Packard +Date: Sat Apr 12 11:01:14 2008 -0700 + + Set some mask bits to try and get yuv conversion working + +commit 91d3e19786e22061f4b617cf39a3cd713139a2d9 +Author: Keith Packard +Date: Sat Apr 12 11:00:51 2008 -0700 + + Use compressed instructions for yuv conversion + +commit 03836067b77606c134c71b30c7078d09d77c95fa +Author: Eric Anholt +Date: Fri Apr 11 12:17:28 2008 -0700 + + Fix the offset to sampler default color, and a compiler warning. + +commit d3138d9ff0f821fb3adbd27684b0c22a8a910c3e +Author: Carl Worth +Date: Tue Nov 13 12:37:13 2007 -0800 + + Enumerate all possible wm_state objects + + We have a collection of wm_state objects for each ps kernel, + (one for each combination of src and mask extend and repeat + values). + + Thanks to Dave Airlie for noticing an errant write through a + wild wm_state pointer in an early version of this commit. + + (cherry picked from 7763706a93d3021907273f9b330750ba110e2fc3 commit) + + This cherry-pick required more reformatting than most, due to the + projective texturing merge. + +commit 2293a3677d1dcf294de6a8712bf0d2f65b50dcc3 +Author: Carl Worth +Date: Mon Nov 12 16:09:00 2007 -0800 + + Enumerate all possible src,mask sampler state pairs + + This will eventually allow for the elimination of sampler state + updates while compositing---and initializing everything in the + initialization function. + + (cherry picked from commit d0874697be8086cd64740c24698df8cd4d31c76f) + +commit da85d1b822dcb31698e9c5ab85a7bb27ad745eee +Author: Keith Packard +Date: Fri Apr 11 11:22:29 2008 -0700 + + Revert "remove '#line NUM ...' in macro process" + + This reverts commit f47486fab3dffcbb03e7ad89f777abba1e887299. + + Sorry for failing to push the #line processing changes to intel-gen4asm; + those are now pushed, so this change should no longer be necessary. Having + correct file name and line numbers in the error messages is awfully nice + though. + +commit f47486fab3dffcbb03e7ad89f777abba1e887299 +Author: Zhenyu Wang +Date: Fri Apr 11 10:12:40 2008 +0800 + + remove '#line NUM ...' in macro process + + intel-gen4asm doesn't allow '#' line + +commit 5c9cde37e769287fb7bf4e08c3600a33c2e92dce +Author: Hong Liu +Date: Fri Apr 11 09:54:34 2008 +0800 + + Bug #14935: Fix i9xx reference clock for spread spectrum. + +commit 152a50703aa5e9ebaa9abbe448518742734a5eb7 +Author: Eric Anholt +Date: Thu Apr 10 16:06:41 2008 -0700 + + Fix compiler warning from 24-bit lvds change. + +commit baa55ffe3b67ca952e4d1ef7087335d76eb2f24b +Author: Carl Worth +Date: Tue Nov 13 12:56:13 2007 -0800 + + Enumerate all possible cc_state objects + + We need one for each possible combination of src and dst + blend_factors. Again, as with recent changes, this eliminates + state updates from prepare_composite and allows that function + to instead simply reference an existing object initialized + within gen4_state_init. + + Thanks to Dave Airlie (and git-bisect) for pointing out that with + gnome-terminal all text was appearing as solid black with an early + version of this commit. As expected the bug was an alignment issue. + + (cherry picked from 0c0ab52c2d100c47f38c7ef826ef585c8b9815e9 commit) + + Performance is approximately equivalent on text tests, but may be + around +2%. + +commit d5a80e1e3ab5724d34b20f9ee6f830efd0f5b076 +Author: Keith Packard +Date: Wed Apr 9 16:27:40 2008 -0500 + + Single memcpy when pitches align on planar image transfer + +commit ac97f2b1487df5574875350a9cded958dae33afa +Author: Keith Packard +Date: Wed Apr 9 16:27:23 2008 -0500 + + Use available symbolic register name + +commit f270456e5612cb88933e6aabcd9a816c5c292229 +Author: Keith Packard +Date: Wed Apr 9 10:00:08 2008 -0500 + + Remove .g4b files on clean + +commit fb6ed8b8b59e9dd18801afef5d7c62042ad176d7 +Author: Keith Packard +Date: Wed Apr 9 09:58:44 2008 -0500 + + Update yuv->rgb conversion programs to write to src_sample regs + + The YUV->RGB code was written to write directly to the dataport registers, + but that didn't work for the compositing functions (cause still unknown). + This change makes that code write RGB values to the src_sample registers as + with the other sample computation fragments. + +commit b01d582e23fc99e32bc47a395e9caa366731372a +Author: Keith Packard +Date: Wed Apr 9 09:30:35 2008 -0500 + + Revert "Compute pixel values directly into data port" + + This reverts commit 346cf57deabb4c336612df4c13650a87b5ef6775. + + Mixing randr transforms and video caused screen corruption for Render + operations. No, I don't understand why. + +commit 3fc3d1a701bae257b70aa7b7654c722f30e71399 +Author: Keith Packard +Date: Wed Apr 9 02:02:56 2008 -0500 + + Remove sync after 965 video put. + + The hardware has been marked as needing a sync, so the next video put will + block waiting for the previous one to complete. Adding a sync here just + stalls the video playback for no good reason. + +commit 825d9e50c59450f07178a54fed2616e551dc0455 +Author: Keith Packard +Date: Wed Apr 9 00:09:34 2008 -0500 + + Add planer video decode kernel + + Support for planar video reduces bus bandwidth by 25% and also reduces CPU + usage during planar->packed conversion. + +commit a03eaaa67b33c57530e92c53d28917e2563b4427 +Author: Keith Packard +Date: Tue Apr 8 16:24:55 2008 -0500 + + Use shared exa_wm code for packed yuv decode + + Eliminate special video sf and ps programs. + +commit 32ef98518394d29cb87405005c660278489396bb +Author: Keith Packard +Date: Tue Apr 8 16:21:55 2008 -0500 + + Compute pixel values directly into data port + + Instead of leaving pixel values in src_sample registers, compute the pixel + values directl to the data port to save 8 moves. This cannot work when no + computation is done as there is both no way to wait for the sampler to + finish and because the sampler returns data in a different order from that + required by the data port (sigh). + +commit b68d9f4245d0ebe3371c179401ff145f1a4d101b +Author: Keith Packard +Date: Tue Apr 8 16:09:00 2008 -0500 + + Use symbolic names for channels in YUV code + +commit 781be9d47289713b0a8fcd95c769a9c6241d62e9 +Author: Keith Packard +Date: Tue Apr 8 16:08:20 2008 -0500 + + Rename src/mask/data registers to indicate channel + +commit 2871ac8eefd0192080bb0569140c3f5d0e1d9b44 +Author: Eric Anholt +Date: Thu Apr 10 13:34:13 2008 -0700 + + Statically allocate the sampler default color, which we never change. + + Performance change is in the noise. Also from Carl Worth. + +commit 80dd784e33847e431403d4659a7b8d8425b2676f +Author: Eric Anholt +Date: Thu Apr 10 13:24:51 2008 -0700 + + Add copyright information for recent editors of this file. + +commit b606278db83ec84b1db562a2d65697c50561b169 +Author: Eric Anholt +Date: Thu Apr 10 13:17:58 2008 -0700 + + Keep static copies of the 965 render programs in video memory. + + This reduces the CPU overhead of memcpying them in every time, for a speedup + in aa24text of around 30%. This is based on work by Carl Worth which is + in the intel-batchbuffer branch. + +commit bd41d2bb858770c109d5013274a4354e8e6ae32d +Author: Eric Anholt +Date: Thu Apr 10 10:24:48 2008 -0700 + + Add dolt to speed up compile time and reduce insanity. + + Hopefully some day we can be rid of libtool entirely. + +commit 96ae9a9f0abc582e45ff4e17dd213c8739c24cb3 +Author: Eric Anholt +Date: Wed Apr 9 14:17:29 2008 -0700 + + SDVO: Rename output_dtd variable to input_dtd, which is its new job. + +commit 72c3995d5158286d20e97296f4552697f32f935f +Author: Eric Anholt +Date: Tue Apr 8 15:00:18 2008 -0700 + + SDVO: Set adjusted_mode in mode_fixup from the preferred input timings for TV. + +commit b61178524bece756dc0fd4f798c6c7743b5725db +Author: Eric Anholt +Date: Tue Apr 8 14:11:42 2008 -0700 + + SDVO: Fix lols TV mode list handling. + +commit 5db73f18d2badec37523850024b9aa824e4e6bd8 +Author: Eric Anholt +Date: Tue Apr 8 13:53:51 2008 -0700 + + SDVO: Use the TV reference clock for SDVO TV outputs. + + Based on a patch by Will Wiseman. + +commit e031cc02e65acfbafb48136dad414751e04425c5 +Author: Mike Isely +Date: Wed Apr 9 14:15:03 2008 +0800 + + Implement support for 24 bit pixel format + + The Intel driver appears to be coded to only work with displays + expecting 18 bit pixels. However I have an application using a LCD + display that expects pixel data in 24 bit format. The difference is + only 2 bits in a single GPU register. This patch implements that + change, controlled by a new driver option, "LVDS24Bit". The default + value is false, which is the previous behavior. When set to true, + then 24 bit panels should work (at least the one I'm testing here + does). + + Fd.o bug #15201 + + Signed-off-by: Mike Isely + +commit 79b18980ac9f60b1978abe421352df965aed1681 +Author: Zhenyu Wang +Date: Wed Apr 9 14:03:45 2008 +0800 + + Include in i810.h for integer types definition + +commit 2b720262e1235f1c9da860ba3e9181f0c377aa5e +Author: Jesse Barnes +Date: Wed Apr 9 17:34:17 2008 +0800 + + Fix LVDS regression + + Disable panel fitting on 855GM, and fix dither setting. + +commit af92f4f885c8eae2211d09080b2289aa5bab9ec1 +Author: David Schleef +Date: Tue Apr 8 12:43:20 2008 -0700 + + Bug #15219: Fix default overlay CSC factors, and use BT709 if available. + + Using the updated factors even when BT709 conversion isn't available + (non-965) should still give us better color reproduction. Tested on a + 945GM, examining the +/-5% of black bars of videotestsrc. + +commit 37bc23660a8c346f1eaa6c93ed2c7a840828f0b0 +Author: Bryce Harrington +Date: Mon Apr 7 17:26:49 2008 +0800 + + Quirks from Ubuntu/Dell + + FD bug #15353. Launchpad bug ID is available for reference. + (cherry picked from commit 24248097988775d62f6c416f2988e74d31c91cd0) + +commit dcbdc901d64d2fab489292ef1c9ca1490bdd1e94 +Merge: 0147c1c 13563bd +Author: Keith Packard +Date: Fri Apr 4 19:19:35 2008 -0700 + + Merge commit 'origin/master' into projective-965 + +commit 0147c1c84872f7a109721a53d88a539932d9be81 +Author: Keith Packard +Date: Fri Apr 4 19:17:55 2008 -0700 + + Forgot to build exa_wm_src_sample_argb.g4b + +commit 13563bd65cbbbb3e697dacd814efa3517e1493dc +Author: Hong Liu +Date: Wed Apr 2 16:05:43 2008 -0700 + + SDVO: Fix DDC bus selection based on output priority list. + +commit 6ad2d6ba86689674876f5f4c473f11e39243ac38 +Author: Eric Anholt +Date: Wed Apr 2 15:16:17 2008 -0700 + + SDVO: Fix mixups with input and output channels. + + The 2-bit input_mask was actually an input count -- in0 is always there, and + in1 is optional. + + The output flags weren't being reported in the log, so I mistakenly took + controlled_output == RGB0 to mean that the device only reported an RGB0, + while it actually reported RGB0|SVID0|YPRPB0|misc|other. Move SVID0 up + in priority and remove the RGB-is-it-really-TV hack I had just come up with. + + Finally, set the input/output mapping at mode set time. We're always + supposed to do this, but haven't had to so far as we've never handled + devices with more than one output. + +commit 3a17400dc67534f0eb474ece080f01061469569c +Author: Eric Anholt +Date: Wed Apr 2 14:21:23 2008 -0700 + + SDVO: Handle RGB outputs that are really TV outputs, and select a TV format. + + Still doesn't light anything up. + +commit 3c1701797b61afaae826a78455079e2115483053 +Author: Eric Anholt +Date: Mon Mar 31 10:04:18 2008 -0700 + + Add WIP SDVO TV-out support. + + Doesn't include properties for selecting TV formats or picture enhancements, + and totally untested. + +commit 9d5ba26fb5c337388920b45eadda85e43bc564fa +Author: Eric Anholt +Date: Fri Mar 28 14:28:28 2008 -0700 + + Add SDVO TV-out registers. + +commit 90886f9a602d58b754e9a8d0f1a9c40803d34fa2 +Author: Keith Packard +Date: Tue Apr 1 00:54:13 2008 -0700 + + Remove extra flushing + +commit 0836373dc6e2f8612f120074980561f7ac11f6f7 +Author: Keith Packard +Date: Tue Apr 1 00:16:05 2008 -0700 + + Add projective versions of the PS kernels + +commit bfd803e085e938866efb45c67a79facef78ec399 +Author: Keith Packard +Date: Tue Apr 1 00:06:08 2008 -0700 + + Shrink WM thread to 32 registers and 1024 scratch space. + + Saving registers means we can run more in parallel. + +commit a6492661ae07310128eb73c3ef037c42ce7ab184 +Author: Keith Packard +Date: Mon Mar 31 23:50:20 2008 -0700 + + Fix composite with mask using new compositing thread code + + Clean up register allocation to never overlap + Always write 4 values for each texture vertex. + +commit f8081178eb6fda0e405967cbacad532561619262 +Author: Keith Packard +Date: Mon Mar 31 12:06:37 2008 -0700 + + remove old shader source files + +commit 879f8717b09f79156b218ee9cc2107700190d586 +Author: Keith Packard +Date: Mon Mar 31 12:05:56 2008 -0700 + + remove old monolithic shaders + +commit 6db8faeb754897b21af045d00f50db9640b080bb +Author: Keith Packard +Date: Mon Mar 31 12:04:00 2008 -0700 + + remove old monolithic shaders + +commit 6bb92213374f278387c539bbe05b773e87e11b90 +Author: Keith Packard +Date: Mon Mar 31 11:59:14 2008 -0700 + + Back to new shaders, fix urb read length + +commit 05710145b6fc4ed2c528128b2e6022591a53d050 +Author: Keith Packard +Date: Mon Mar 31 11:31:31 2008 -0700 + + Dont set the compr bit on 8-unit sends + +commit 08500507284f13ad7084eb231b43e117e9728129 +Author: Keith Packard +Date: Mon Mar 31 02:20:43 2008 -0700 + + Use m4 to clean up gen4 asm progs. Start adding projective transform support. + + Use macros for register names, modularize functions into separate files. + +commit 949d73271d7100c1f028fd60f185f4929461304e +Author: Keith Packard +Date: Sun Mar 30 19:19:46 2008 -0700 + + Remove rotation sf and wm progs + +commit 492ff1494f782240e6ca68919b2d0b9aa400fc53 +Author: Keith Packard +Date: Sun Mar 30 19:14:18 2008 -0700 + + Fix the sf_mask program to compute and pass corrected uvw cooefficients + + sf_mask is the same as sf except that it must compute both src and mask uvw + cooefficients, which are conveniently adjacent in the same registers, and so + need only an extended execution width + +commit 6304b38423f99190a5e54f1a7dcaa75adfad4f2a +Author: Keith Packard +Date: Sun Mar 30 00:54:51 2008 -0700 + + Reimplement wm program for nomask case to handle affine transforms + + This involves correctly computing u/v locations based on x/y vectors and + line constants computed in new sf program. + + Also, use fewer instructions to make this go a bit faster (2X for 500x500 + composite). + +commit 771a56b1ed0df69345c723cb62a73b6842cd8227 +Author: Keith Packard +Date: Sun Mar 30 00:54:07 2008 -0700 + + Clarify comment in exa_sf program + +commit 4f469189fed541549e5d470b2529275a29cc2f20 +Author: Keith Packard +Date: Sat Mar 29 14:28:05 2008 -0700 + + Compute du/dv/dw in no-mask SF prog + +commit 7dcb6e627449c80cea9812462ce6a3e125bd1240 +Author: Keith Packard +Date: Sat Mar 29 14:27:35 2008 -0700 + + Disable cursors while switching modes + +commit d50264fc7c4e0f80d9cc68dfdf322f68520a0f1e +Author: Eric Anholt +Date: Fri Mar 28 15:15:26 2008 -0700 + + Add a "total" field to intel_idle output (set when any unit is busy). + +commit 1450acd046d47e1739a3ffbd146c73ad2974a935 +Author: Jesse Barnes +Date: Fri Mar 28 13:23:02 2008 -0700 + + Use combo backlight control rather than pure legacy + + If the legacy bit is set, use both the BLC_PWM_CTL and LBB regs to control the + backlight, rather than just LBB. Looks like more platforms want that than what + the current code does. Note that kernel provided interfaces will always be + used if available, so this shouldn't affect users with /sys/class/backlight + interfaces at all. + + Fixes #14721. + +commit 49f409fef5e8b04a8595309ba8959ca36b2e41b1 +Author: Matthias Hopf +Date: Wed Jan 9 16:31:41 2008 +0100 + + Include missing stdlib.h for free() + +commit 3414313ac9d0faa95797ee18cc33afa231ec7581 +Author: Matthias Hopf +Date: Wed Jan 9 16:08:57 2008 +0100 + + Fix obviously wrong verification of DRI_SUPPORTS_CLIP_NOTIFY. + +commit c40f195f2dc3467259b4588e087aac9741003ebf +Author: Matthias Hopf +Date: Wed Jan 9 14:40:49 2008 +0100 + + Fix obviously stray '(' in non-I830_USE_EXA case. + +commit 7bba2c13310ed5ac22a355a3cc0ec8b7afaa79cf +Author: Zhenyu Wang +Date: Fri Mar 28 11:41:24 2008 +0800 + + Disable DRI earlier if fb width > 2048 + +commit b1f358ba97473b792ec2b7ed5170152faebe7262 +Author: Zhenyu Wang +Date: Fri Mar 28 11:29:40 2008 +0800 + + Disable overlay on new mobile chipset + + It's gone, really. + +commit 588371ba15afffa9343629f0ea7ce530586eef0b +Merge: 52d6ced c13efdd +Author: Jesse Barnes +Date: Wed Mar 26 14:53:15 2008 -0700 + + Merge branch 'master' into pfit + +commit c13efdd3d6d3846078766814b57306a7519bce18 +Author: Paulo Cesar Pereira de Andrade +Date: Wed Mar 26 10:11:36 2008 +0800 + + More compile warning fixes. + + o Check for RANDR_GET_CRTC_INTERFACE before defining functions that + are used only if it is defined. + o Declare a variable before code, and rename it from ret to xvmc_status + to better describe it. + o if 0 some static functions not used. + o Don't declare some unused variables. + o Declare as static some functions that are used only in the file defining it. + o Add a default/fallback return True to the Bool function + src/xvmc/intel_batchbuffer.c:intelInitBatchBuffer(). + o Ansify src/xvmc/xf86dri.c. + o Add missing prototype to src/xvmc/xf86dri.h and follow pattern of other + headers by adding "extern" before function prototype. + +commit 8cdbd55f8075cd18b563badde35815665d7d053e +Author: Eric Anholt +Date: Tue Mar 25 10:06:14 2008 -0700 + + Fix 965+ rendering issues with DRI disabled. + + The new chips no longer automatically flush the rendering cache, so if we + don't flush the RC at blockhandler, the last rendering done may not + appear on the screen. This was particularly noticable with a bare Xorg with + some missing root weave, and terminals where the last character wouldn't + appear until the cursor blinked. A flush in the DRI blockhandler path had + hidden this issue for most people. + +commit c02ab432dd7058c700c35eecf6215daf5f262c51 +Author: Eric Anholt +Date: Mon Mar 24 13:48:20 2008 -0700 + + Revert "Use mprotect on unbound AGP memory to attempt to catch use while unbound." + + While I still like the idea, the mprotect calls themselves are failing on + Linux and causing more trouble than they're worth. + + This reverts commit a1612b7728d4153499fe86b6713a13c8702cc7d9. + + Conflicts: + + src/i830_driver.c + src/i830_memory.c + +commit 552a1b824db31a234d7c5cb71057ed0e0ce64477 +Author: Eric Anholt +Date: Mon Mar 24 13:25:37 2008 -0700 + + Disable a bunch of clock gating disables on IGD_GM, which doesn't need them. + + Besides our driver having fallen through to the GM965 path for + RENCLK_GATE_D1, the BIOS was turning some of these on. It may be relevant + for previous platforms as well to zero out the fields that should be zero + in the other registers. + +commit c1a2bc357fc122d3718eca771530367ba2915815 +Author: Julien Cristau +Date: Mon Mar 24 13:29:24 2008 +0800 + + Don't try to build XvMC if DRI is disabled + + Instead of failing the build, don't even try unless --enable-xvmc was used. + +commit 5fcc002f77ebb66c1dc0f901a377ccf9bbc1d0bd +Author: Maxim Levitsky +Date: Mon Mar 24 13:24:12 2008 +0800 + + Fix crash triggered by dpms low power mode with hardware overlay running + + When overlay switch crtc, it ignores current crtc dpms mode which + might lead to hang. + +commit 645980596450ed21c3b8927410a6bfe38a0c55d1 +Author: Keith Packard +Date: Fri Mar 21 03:08:24 2008 -0700 + + Transformed coord computed using floats. Don't move bilinear composite dst. + + The homogeneous coordinate computation in the core server cannot be used for + many legal matrices as it overflows. Just use floats in the driver; faster + and avoids troubles. + + When compositing with bilinear filter, don't push the dst coordinates around + as that makes the output blurry when pixels are aligned. + +commit bf725b92cf93d74a6f414f81f319dddbc2c78525 +Author: Zhenyu Wang +Date: Fri Mar 21 11:50:27 2008 +0800 + + xvmc: fix distcheck + + Add i915 headers in Makefile.am + +commit e8da1a5418ab240ae7b1ef95bfea6bee22f1e0c1 +Author: Joerg Sonnenberger +Date: Fri Mar 21 11:41:49 2008 +0800 + + Fix DRI config for NetBSD + + Reported by Joerg. This does a little more clearn up. + +commit 224c36cc14a7552bc5df793ad582f0ea5349eb1e +Merge: 4b9b7b0 03ccffd +Author: Zhenyu Wang +Date: Thu Mar 20 10:31:57 2008 +0800 + + Merge branch 'xvmc' + +commit 52d6ced652059989e6d9780a149488ccd16e3a22 +Author: Jesse Barnes +Date: Wed Mar 19 11:59:15 2008 -0700 + + Fixup backlight control and panel fitting property names + + They should be listed as lower case, since that's what you'd pass to xrandr. + +commit 4b9b7b007d729f94b01b0031d8ae478134b501da +Author: Keith Packard +Date: Tue Mar 18 14:08:19 2008 -0700 + + Handle projective transforms on 9xx for Composite. + + Projective transforms require un-normalized texture coordinates and the use + of the texldp instruction. The coordinates are passed as x/y/z/w (the z is + unused, but there isn't a vertext format for just x/y/w). + +commit f699389818f1f11f3edddcdddcd0a43be21ba4c0 +Author: Keith Packard +Date: Tue Mar 18 14:06:47 2008 -0700 + + Add i830_transform_is_affine and i830_get_transformed_coordinates_3d. + + These are needed to deal with projective transforms in the composite + operation. + +commit a55974b435224fe5726fa44298d051c71e4056a5 +Author: Keith Packard +Date: Tue Mar 18 13:47:20 2008 -0700 + + Add defines for 9xx S3 word in 3D_STATE_LOAD_STATE_IMMEDIATE + + These aren't used at this point, but what the heck. + +commit 4f5500abe209b92b39ae1f2d7a1118362ac95034 +Author: Keith Packard +Date: Tue Mar 18 13:45:46 2008 -0700 + + 8xx/9xx can handle textures to 2kx2k. 965 can do 8kx8k + +commit b1b173d03b3acd300c3b0f0ceffeddf1a8137839 +Author: Julien Cristau +Date: Tue Mar 18 12:02:25 2008 +0100 + + Add i8[13]0_ring.h to _SOURCES to fix distcheck + + Thanks to Bruno . + +commit 03ccffd5b9b8108166ea143884a1a0a6417f3236 +Merge: ac76363 d72e18c +Author: Zhenyu Wang +Date: Tue Mar 18 16:54:15 2008 +0800 + + Merge branch 'master' into xvmc + +commit ac763634069fe070b3afc073ce437959612d39fe +Author: Zhenyu Wang +Date: Tue Mar 18 16:52:29 2008 +0800 + + Disable XvMC if DRI is not enabled. + + Default XvMC to disabled. + +commit d72e18c10995079121eded758a60ed99b5b8ce1a +Author: Paulo Cesar Pereira de Andrade +Date: Mon Mar 17 16:59:12 2008 +0800 + + Compile warning fixes. + + Move some declarations and don't declare an extra variable with the + same name, to fix warnings about mixed declarations and code. + +commit 81df48d8d151907c2e9dd33a729860c39aa78175 +Author: Zhenyu Wang +Date: Mon Mar 17 10:05:57 2008 +0800 + + bug 15060: Dell Latitude X300 needs pipe A quirk + +commit ffb5a115cc62ed63110f77815b7f04976f720065 +Merge: 05cf070 24e6eb2 +Author: Jesse Barnes +Date: Mon Mar 17 15:19:05 2008 -0700 + + Merge branch 'master' into pfit + +commit 24e6eb2ae683ed6614ac79c0d7811ac9fe94209f +Author: Jesse Barnes +Date: Mon Mar 17 14:17:27 2008 -0700 + + Add support for new ->get_crtc output callbacks + + Using the new interface allows the server to avoid some flicker at startup. + +commit 69fbc17441d0f894d17b058e65ae22300cd2a54c +Author: Eric Anholt +Date: Fri Mar 14 10:04:18 2008 -0700 + + Change OUT_RING and similar calls to OUT_BATCH for batchbuffer merge + +commit 65f92cfb7a05c9c028cf73ce1221cc0a651b50b3 +Author: Eric Anholt +Date: Fri Mar 14 10:03:11 2008 -0700 + + Remove h0h0 UploadToScreen implementation that used pattern blits. + + It never worked and was never that hot of an idea. Most of the motivation is + gone with glyph pixmaps anyway. + +commit 05cf07071e25f84dec3476a9bed7235ed50cd249 +Author: Jesse Barnes +Date: Thu Mar 13 18:12:00 2008 -0700 + + Initial panel fitting changes + + Basic support for panel fitting. + +commit 402fbd36221d2ed27913850f6bfcce768b970fe8 +Author: Jesse Barnes +Date: Thu Mar 13 16:12:20 2008 -0700 + + Remove fbc enable/disable messages + + Tired of them filling up my logs. + +commit c20d78a7bc512219fa36dfc9707fe65f66ab80f1 +Author: Eric Anholt +Date: Mon Mar 10 17:27:45 2008 -0700 + + Add workarounds for 830/845's lack of a8/x8r8g8b8/x8b8g8r8 support. + + When we have unset channels (color for a8, or alpha for x8*), force them + to the appropriate value in the texture combiner rather than relying on getting + the desired results from teture mapping. Performance is the same on 865, so + multiple paths aren't necessary and we can use the less friendly texture + formats everywhere. + +commit f425181695b1b3864373e1919cf651229f19fa69 +Merge: f4cfc98 1c0e495 +Author: Zhenyu Wang +Date: Thu Mar 13 23:58:56 2008 +0800 + + Merge branch 'master' into xvmc + +commit f4cfc98ab038af4d5d52af12e4d60ded62cf4a6e +Author: Zhenyu Wang +Date: Thu Mar 13 23:56:48 2008 +0800 + + nuke unneed error_base and event_base + +commit f269c69b4e7be076dc9838d0e0801c940ccdba08 +Author: Zhenyu Wang +Date: Thu Mar 13 23:41:22 2008 +0800 + + remove unused init/fini hooks for xvmc driver + +commit 1c0e4958564588162bc22a980567436dfc9d1e56 +Author: Zhenyu Wang +Date: Thu Mar 13 10:15:55 2008 +0800 + + Always bind memory after agp aperture allocation + + This fixed the crash appearing for Xv buffer memory, which appears + allocation and free happening in stolen memory. We should always + try to bind for stolen memory for correct protect setup, otherwise + we might get fault that stolen memory protect reverted to non-r/w + after previous free and unbind. + + Credit goes to Lukas Hejtmanek to identify the real problem of Xv + crash! + +commit 2e2372912ed9bc0d86e8960653ef0bfce5cf99ab +Author: Eric Anholt +Date: Wed Mar 12 11:38:56 2008 -0700 + + Eliminate local variables defined in i830 BEGIN_LP_RING(). + + This lets us get better sanity asserts, and avoid mysterious braces when you + do two BEGIN_LP_RING()s in a single function. Potential minor performance + loss isn't too exciting, as ring access is about to become a compat path + anyway. This change also removes the requirement for ring emits to be aligned + to dwords. + +commit abf11a274e14535630742fe4c41cc0ae92555293 +Author: Eric Anholt +Date: Wed Mar 12 11:03:26 2008 -0700 + + Separate i810 and i830 ring macros out into separate files. + + I want to hack on i830 for changing it into a compat path for batchbuffer + without having to worry about the i810 stuff getting broken. + +commit e04908853db74dc76718f6bc0dfb23b5ab3c5837 +Author: Jesse Barnes +Date: Wed Mar 12 15:44:58 2008 -0700 + + Add sysfs backlight support for Fujitsu laptops + + Tested by Dan Williams. + +commit 907399660b83b3939aab3dc7d0697197441e4ec8 +Author: Jesse Barnes +Date: Wed Mar 12 12:33:36 2008 -0700 + + Add stdint.h to DVO drivers + + Fixes the build for me (just following the git development guide on a + new machine). + +commit 8563effc96195116c96f89a801c1de6ab982630a +Author: Jesse Barnes +Date: Wed Mar 12 11:14:17 2008 -0700 + + Add stdint.h to i830_bios.h + + Needed for new uint* usage. + +commit c82d8e51c6ff9522ad0deb33399d13f3d6fef19d +Author: Jesse Barnes +Date: Wed Mar 12 11:13:50 2008 -0700 + + Add pipe A force quirk for Thinkpad R31 + + Fixes #15036. + +commit a8f4108bea0966406b0fcae8d062ae1cfb4afbb3 +Author: Hong Liu +Date: Wed Mar 12 21:55:56 2008 +0800 + + Fix rotation mem with kernel memory manager in VT switch + + Unbind and bind a DRM BO may change the buffer offset, thus + crtc may reference a wrong rotated memory after a VT switch cycle. + Destroying it here will cause its reallocation when entering VT. + +commit cd73c6a5a78eac726b14ef242b8452c559c4c003 +Author: Zhenyu Wang +Date: Wed Mar 12 20:37:41 2008 +0800 + + Pass default visual in dri context create + +commit 21580add63307ca68790bf911243b8675f5f7c64 +Author: Zhenyu Wang +Date: Wed Mar 12 20:37:17 2008 +0800 + + disable memory alloc debug + +commit 5f272471878c896038b2c3f2bf704655d908828d +Author: Eric Anholt +Date: Tue Mar 11 12:14:51 2008 -0700 + + Nuke more CARD* types from i810 driver. Untested. + +commit 9a62d3b598cca3c28fa8b6313bba82983cc29ecf +Author: Eric Anholt +Date: Tue Mar 11 12:07:52 2008 -0700 + + Remove i830+ driver's use of CARD*/INT* types for great justice. + + Several uses are actually left, which are determined by the X Server + interfaces we're implementing. + +commit 15f17aa682129c57d3864a355834edff06e91540 +Author: Eric Anholt +Date: Tue Mar 11 11:27:10 2008 -0700 + + Cleanse DVO drivers of CARD* types. + +commit 642ba6278876ec945ad687c2b9624e532cd3f629 +Author: Eric Anholt +Date: Tue Mar 11 09:59:16 2008 -0700 + + Add support for brightness control to i915 textured video output. + +commit ecdb5963ef6873ab82998dca6ca5186644666ec8 +Author: Jesse Barnes +Date: Tue Mar 11 11:08:25 2008 -0700 + + Add pipe A force enable quirk for Toshiba Portege R205-S209 + + Fixes #14944. + +commit 4ea67e9b853e9ed61557780b87bd184fc81fd731 +Author: Kristian Høgsberg +Date: Tue Mar 11 13:54:33 2008 -0400 + + Crack down on warnings. + + Fix printf formatting warnings, wrap a couple of long lines, nuke + unused variables, add missing #include . + +commit 9fd13e6773371c82b9799a5bda7c96ffa5cafe8c +Author: Kristian Høgsberg +Date: Tue Mar 11 13:48:07 2008 -0400 + + Silence warnings about possible uninitialize use of dst_format. + + Whoa, gcc got a lot smarter about warnings. If iXXX_get_dest_format() + doesn't support the picture format passed in it won't initialize the + uint32_t pointed to by dst_format and return FALSE. + + What gcc now can detect is if dst_format is used without checking the + return value, it might be used uninitialized. This patch makes sure + we always check the return value before using dst_format. + +commit 31654f52b084ebb32f69854dfb1c342c9da07928 +Merge: a03aca1 02c0ffb +Author: Zhenyu Wang +Date: Tue Mar 11 14:37:41 2008 +0800 + + Merge branch 'master' into xvmc + + Conflicts: + + man/intel.man + src/i830_driver.c + +commit 02c0ffb1d8112a6fb03f9c8eae9ec1a1fca123ef +Author: Jesse Barnes +Date: Mon Mar 10 11:51:37 2008 -0700 + + Add pipe A force enable quirk for Dell Latitude D500 + + Fixes #14888. + +commit a1cd37f94cb8efbde84ba0a46839fb8735dd3595 +Author: Dave Airlie +Date: Mon Mar 10 14:43:24 2008 +1000 + + quirk: add DVO ivch quirk + +commit f2b9f387af7f618ad083b1ec8bee513ff2157d06 +Author: Matthieu Herrb +Date: Sat Mar 8 23:36:56 2008 +0100 + + Makefile.am: nuke RCS Id + +commit bf6d59ee98127ac6447848c4202c54d861a510d4 +Author: Eric Anholt +Date: Fri Mar 7 14:26:22 2008 -0800 + + Avoid setting reserved bits in SDVOx on everything 965-class. + + This will likely fix SDVO outputs on G35 hardware. + +commit 5915c75422c5277d530e7f8ecbdfe94654706efd +Author: Jesse Barnes +Date: Fri Mar 7 13:18:09 2008 -0800 + + Enable hardware overlay on 965 + + Based on Maxim Levitsky's patch for the same. Many thanks to Maxim for + discovering that this features still works in recent hardware! + +commit 13ae79b415d944891cfdc2cd2d5397fec36a4e8e +Author: Dave Airlie +Date: Fri Mar 7 08:04:37 2008 +1000 + + fixup pciaccess version detect + +commit be08b61540e1edbb7673f0b6add0f1e32b136b3c +Author: Jesse Barnes +Date: Thu Mar 6 13:55:13 2008 -0800 + + Implement new get_property feature for backlight control + + This should keep the backlight value reported by xrandr --prop & xbacklight + consistent with changes by other software in the system (like the hotkey driver + or kernel backlight driver). + +commit 502e41f6dff91393cfeaf08c9ba312781d1b7267 +Author: Zhenyu Wang +Date: Thu Mar 6 19:32:29 2008 +0800 + + remove extra dri checking + + And directRenderingDisabled already has config check result. + +commit ea58d66cf778c0477c30e5bfe3142b64e8b971d5 +Author: Zhenyu Wang +Date: Thu Mar 6 19:31:33 2008 +0800 + + No ring, no sync + +commit c823fb00a20f523f50a2779c36aa1c014ba01535 +Author: Jesse Barnes +Date: Thu Mar 6 19:29:22 2008 +0800 + + Pull chipset detection out of PreInit into its own function + +commit 6b16cee0786b636dc849826193b26e898832a73c +Author: Jesse Barnes +Date: Thu Mar 6 19:27:42 2008 +0800 + + Account for FBC LL cache in memory reservation + + When we reserve memory (memory that won't be managed by the kernel) make + sure to reserve space for the FBC LL cache as well. + +commit 6f04d02471f1cebc76eab637a9a78c4004fd3cc9 +Author: Jesse Barnes +Date: Thu Mar 6 19:27:07 2008 +0800 + + Move MTRR fixup to its own routine + +commit 750beb9232b51223d8e650878ce8dad071f0d0b3 +Author: Jesse Barnes +Date: Thu Mar 6 19:24:47 2008 +0800 + + Refactor memory allocation into a separate function + + This simplifies the memory allocation code and fixes a number of bugs. + Prior to this change, some flags may have been set after memory + allocation occurred, meaning they had no effect. It should also make + the allocation logic clearer. + +commit d466b25d09bbe85abe84d9d7714ffb65fafe7593 +Author: Zhenyu Wang +Date: Wed Mar 5 13:38:58 2008 +0800 + + Really print adjusted_mode for mode debug + +commit d767eabe534be7f7bdcbf00614a8901124ac911f +Author: Hong Liu +Date: Thu Feb 28 13:51:18 2008 +0800 + + Fix DPLL programming in CRTC mode set + + The following patch fixes the display problem on internal development machines. + The code in commit 3c22ed633be2ac96eea7bc533839e956f1f31b84 (Jesse's force pipe + A enable patch) broke DPLL programming. Moving the DPLL set back up in the + function solves the problem. + + Fix for internal bug #309. + +commit 4936e097028b91f4bdc2d9101dc49f6fe586e718 +Author: Jesse Barnes +Date: Tue Mar 4 08:52:40 2008 -0800 + + Change FBC idle mode back to default + + Use the "immediate idle" mode for FBC. Rather than waiting for the current + compression pass to finish before signalling to the CPU that it's idle, this + mode should stop any current compression pass and tell the CPU that the GPU is + idle right away. + + Seems to fix #13326. + +commit 02a3b80ee8341968dbce5b7cb871b187db5ff805 +Author: Zhenyu Wang +Date: Fri Feb 29 11:13:34 2008 +0800 + + Bug 14591: comment out MI_DISPLAY_POWER_DOWN as for 965GM only + +commit ea7c7d088e0a3c3b7ab2bdd0475aa13379764bf4 +Author: Peng Li +Date: Wed Feb 27 11:56:55 2008 +0800 + + HP Compaq 6730s has no TV output + +commit fdc25cb0ca7d479051cee66a032f9ee1b68db98a +Author: Mark Kettenis +Date: Tue Feb 26 17:26:50 2008 -0800 + + Bug #14649: Fix build if pciaccess headers are not with other xorg headers. + + We failed to include the pciaccess header flags in our build. Even if the + server was to include those flags for us, it would leave us broken for the + tools-only case, and it's easier to just put the flags everywhere so we avoid + future copy'n'paste mistakes. + +commit e55d86f654aa9dd4951b441636c8ca4b37786daf +Author: Eric Anholt +Date: Tue Feb 26 12:26:23 2008 -0800 + + Fix SDVO I2C access on Mac Mini in EFI mode. + + The GMBUS was being left in SDVO pin access mode, which blocked our bit-banging + access to those pins. Thanks to Peter Jones for quick debugging turnaround + in getting this fixed. + +commit 6935c732c351585f31e2094c4201a00e3d5529b3 +Author: Julien Cristau +Date: Mon Feb 25 14:47:02 2008 +0100 + + Look for src/{modes,parser} in $srcdir, not in objdir + + This makes the detection work in case configure is run from another directory. + +commit 66cdccb021a4748b2af41e415c36ed58ca808df6 +Author: Zhenyu Wang +Date: Mon Feb 25 14:29:09 2008 +0800 + + Fix overlay rotation + + Track current covered crtc rotation in port's private, + and fix overlay rotation transform to be against crtc mode + coordinate. + +commit 975d7833bc844485c7043538336bddcba7f7f90e +Author: Jesse Barnes +Date: Fri Feb 22 11:41:25 2008 -0800 + + Add quirk for DVO channel selection + + Some machines want DVOA, some DVOB. We can use this quirk to differentiate + them until we come up with a better solution. Patch from Hong Liu. + + Fixes #13722. + +commit 33802b6ee3c298bae4d2b6f464ee5cc730a58506 +Author: Jesse Barnes +Date: Thu Feb 21 08:43:34 2008 -0800 + + Add pipe A force enable quirk for ThinkPad X40 + + ThinkPad X40s need this quirk or they'll crash frequently. + + Fixes #14521. + +commit 444984a578aae92ff55c06da897ea1d23679e706 +Author: Jesse Barnes +Date: Thu Feb 21 08:37:42 2008 -0800 + + Remove side effects from VGA debug code + + The VGA register dumping code was leaving ARX in data mode rather than index + mode, which could cause problems for later software accessing AR* registers. + Fix it to make sure it's in index mode when we're done. + + Fixes #14434. + +commit 28049540d8a9f79401fcfeb90784f5a528e7b34f +Author: Jesse Barnes +Date: Wed Feb 20 13:08:27 2008 -0800 + + Fix DSP*CNTR restoration + + When checking which pipe a given plane was associated with, we weren't properly + masking the pipe selection bits. Fixes #14481 and should allow the driver to + work with vesafb again. + +commit 293120bfc40a5b828567551954d8312639e73578 +Author: Zhenyu Wang +Date: Tue Feb 19 21:13:45 2008 +0800 + + Don't leak memory if no DMI info is provided by kernel + +commit cdc5cb7c3d24f36a30fb931b43ec6df8294709e2 +Author: Zhenyu Wang +Date: Tue Feb 19 08:51:53 2008 +0800 + + Fix last 8XX clock's p2 value commit + + My fault to change Hong's origin patch reversely. + +commit be0591880f20bdcbae159d5ab47113b6cc6fbffe +Author: Zhenyu Wang +Date: Mon Feb 18 14:35:06 2008 +0800 + + Fix Lenovo X60 TV quirk + + Z61 has same subsys ids with X60, but does have one S-video + TV out. Use DMI info instead to quirk TV on X60, X60s. + +commit d5e564c5f24b0d9320bc4908693d37e7e6d68bc6 +Author: Zhenyu Wang +Date: Mon Feb 18 14:32:32 2008 +0800 + + Add DMI info for i830 quirks + + Linux kernel has CONFIG_DMIID to export dmi info + through sysfs. + +commit 4a42b01f5ee5a673716d6959dfe0e693b037eb48 +Author: Keith Packard +Date: Sat Feb 16 18:16:12 2008 -0800 + + Decode DSPCLK_GATE, dump PIPE*STAT, MI_MODE, MI_DISPLAY_POWER_DOWN, MI_ARB_STATE, MI_RDRET_STATE, ECOSKPD + +commit 663313559873208c00c3d3748b99d837949ecdf2 +Author: Zhenyu Wang +Date: Fri Feb 15 13:20:22 2008 +0800 + + Bug #14440: fix stolen mem size mask on i830M + + For i830M stolen mem size mask should always be 0x70. + Use 0xF0 for later chipsets should be ok, so behavior is + identical to kernel agp. + +commit 8c8ca16120927fc2d3cf8bcd5212a4227a280708 +Author: Eric Anholt +Date: Fri Feb 8 11:34:04 2008 -0800 + + Add a little program to output the stepping information for several chipsets. + +commit f5896dcd1f5a964dce024ab8887ac8a79f7093a1 +Author: Jesse Barnes +Date: Thu Feb 7 11:56:28 2008 -0800 + + Add CACHE_MODE_0 register to dump output + +commit d59eaa8b1e6eeb9775c9d21c7a5fd28f25b2bc3a +Author: Jesse Barnes +Date: Wed Feb 6 09:35:43 2008 -0800 + + Only disable FBC if registers are available + + The call to disable FBC should only occur if the FBC feature is actually + present or we may end up hanging on a read from a non-existent register. + +commit 83a071e2c01eb71462273f25d86d77159ac51114 +Author: Jesse Barnes +Date: Tue Feb 5 17:09:19 2008 -0800 + + Fix build warnings on 64 bit + + Use PRIx32 for printing CARD32 types, and PRIx64 for portably printing uint64_t + types. Requires the addition of a new include, inttypes.h, to work. Hope C99 + is ok with everybody... + +commit abf4b0cafa038e97bd7a6e5ba107b822117b9ccc +Author: Jesse Barnes +Date: Tue Feb 5 13:30:51 2008 -0800 + + Only enable FBC if one pipe is active + + Some chips can't support FBC if multiple pipes are active. So if more than one + pipe is on or we're going from one->two pipes enabled, make sure FBC is + disabled. + + Intended to fix 13418, 13326, 13152. + +commit f79a585d57c61fbe9af5684a336918e1fe3e8416 +Author: liuhong +Date: Tue Feb 5 11:04:34 2008 +0800 + + xf86-video-intel: fix ivch using wrong dvo register + + We use the wrong DVO output register for ivch which is used for DVO LVDS. + Vbios enables DVOB and driver never touches it, so everything seems + working correctly now. + +commit cabed67b6a0e4dd408eeb8d2083269100a65933c +Author: Jesse Barnes +Date: Tue Feb 5 11:36:24 2008 -0800 + + Program FBC fence offset register + + Just a partial fix for some of the FBC issues people have been seeing. The + other half is to disable FBC if both pipes are running. + +commit 332587081fb05d284864aabe608dd9988eee3d44 +Author: Zhenyu Wang +Date: Tue Feb 5 10:34:55 2008 +0800 + + Fix last commit on i8xx debug p2 value + +commit 2d18a299cf39f2ecf9bd3ba8407f892566b2edcc +Author: Hong Liu +Date: Tue Feb 5 09:10:48 2008 +0800 + + Fix PLL reference clk debug dump + +commit 9536515d7717969795edc1b80d6e6a36820dd575 +Author: Hong Liu +Date: Tue Feb 5 09:06:14 2008 +0800 + + Allow non-strict free order for bo_list + +commit 11de831cb706025c003e98fef6d666d273192bcd +Author: Hong Liu +Date: Tue Feb 5 08:58:44 2008 +0800 + + Bug 10584: Mac Mini EDID data assigned to TMDS output + + EDID data for TMDS output got from crt should be applied + to TMDS output on mac mini. + +commit 95327571134d8ebb9d936d80b70c2f642393aa9f +Author: Hong Liu +Date: Mon Feb 4 17:14:23 2008 +0800 + + Bug 10773: fix i8xx pll p2 value in i830_crtc_clock_get() + + Also fix debug dump, slightly modified to use macro instead. + +commit be1b568bc2379856c3eaaed365002512bebc218c +Author: Paulo Cesar Pereira de Andrade +Date: Thu Jan 31 22:47:18 2008 -0200 + + Make sure symbols used by other modules are public. + + These symbols must be explicitly exported, otherwise if compiled with + hidden symbols, LoaderSymbol (and dlopen) will fail to find them. + +commit cc1031a834b81aa6f835c282ad86deddabe229a0 +Author: Mark Kettenis +Date: Thu Jan 31 21:02:48 2008 -0800 + + Bug #14246: Fix biuld on OpenBSD. + +commit b1e1c7cd993ab4f1935d750eb8852e74be757e53 +Author: Eric Anholt +Date: Wed Jan 30 23:01:04 2008 -0800 + + Add detail on different units to intel_idle. + +commit aa3ac79759581b5eb05293a8cbcf89eb5b76712c +Author: Zhenyu Wang +Date: Thu Jan 31 18:26:46 2008 +0800 + + Don't crash if SW cursor + + In case of device option or hw cursor allocation fails. + +commit 2e43bec8731ba1b172f7a0bf867bbb5c1adbda2d +Author: Jesse Barnes +Date: Wed Jan 30 18:59:12 2008 +0800 + + Frame buffer compression support on new chipset + +commit bf629466a46c4037ec7b7cc5ee16be947618bd68 +Author: Zhenyu Wang +Date: Wed Jan 30 18:55:20 2008 +0800 + + hardware status page initialization rework + + Order hardware status page setup more reasonable after + all memory bound, in case new chipset requires non-stolen + page and that could be bound then. + + Also clean up drm irq handler install function, and put + first install in starting stage later than status page setup, + so we won't make device cry for uninitialized status page. + +commit 04032dad28baab80131edbe8fe58aade8149bb71 +Author: Zhenyu Wang +Date: Wed Jan 30 18:52:32 2008 +0800 + + Wrap up chipsets which needs graphics address for status page + + Also add support on new chipset. + +commit b9c3fa79d9fd48c34536f92e6c1c70fe3a619410 +Author: Keith Packard +Date: Fri Jan 11 15:51:00 2008 -0800 + + Add intel_idle to measure GPU load ratio. + + Samples GPU idle register to detect when the GPU is busy; prints out the + number of busy samples per 100 total samples once per second. + +commit 5d9e67aec3ce458d22b7febd3819542abb360534 +Author: Erik Andren +Date: Fri Jan 25 11:06:01 2008 +0800 + + Clevo M720R has no TV-out + +commit 6bf53eb48f40ad0c8ea9679ee634447410821b4f +Author: Zhenyu Wang +Date: Fri Jan 25 16:59:13 2008 +0800 + + Set vtSema before EnterVT + + Which was missing in our ScreenInit and initial EnterVT. + This not only causes failure in initial rotation with TTM, + as we won't bind in rotate_mem alloc in this case, and hide + another bug that we call randr12 function in I830LoadPalete + before we call xf86RandR12Init. + +commit 94a18fa1f8141837bdab32e545da7a7aed1cc396 +Author: Julien Cristau +Date: Thu Jan 24 15:24:40 2008 +0100 + + Don't build reg_dumper if we don't have pciaccess 0.10.0 + + The pci_device_map_range() function was added in libpciaccess 0.10.0, and + is used by the reg_dumper tool. Don't try to build it if we have an older + libpciaccess. + Also make sure that util-macros >= 1.1.3 is available when running autoconf, + because it's required for the PACKAGE_VERSION_* macros. + +commit d341e41c863f1212bf2c6b84782a7e472b6612a1 +Author: Zhenyu Wang +Date: Thu Jan 24 10:40:18 2008 +0800 + + Clear shadow memory after allocation + +commit 88a1041c5361964d37107c22d77feaa1b2160656 +Author: Zhenyu Wang +Date: Thu Jan 24 10:36:06 2008 +0800 + + Fix i830 block handler wrap + + which was observed in rotation crash with stack overflow. + +commit db0a7c569e383436a2725e1e74f35fb426da1196 +Author: Andreas Stawinoga +Date: Thu Jan 24 08:51:09 2008 +0800 + + Samsung Q45 has no TV output + +commit f54bba7600647c76fe3bd2d0133edc06dbea6a05 +Author: Zhenyu Wang +Date: Tue Jan 22 00:48:23 2008 +0800 + + Add missing i830M and 845G pci ids info + +commit 633dbd28218fd8a746c1735fd44a14f35bd07faa +Author: Julien Cristau +Date: Thu Jan 17 22:34:21 2008 +0800 + + Bug 14032: i810, set default depth to 16 + + X fails to start without an xorg.conf on i810, because the default depth set by + the server (32) is not supported by the driver. I think the driver should + default to 16 bits (it supports 24, but when I tested it that didn't seem to + work very well, and dri is disabled at 24 bits depth anyway) instead of letting + the server use 32 and failing later on. + +commit 4fec18e07f2b23306e885d63c74661ae0e4b04d9 +Author: Jesse Barnes +Date: Fri Jan 11 10:28:59 2008 -0800 + + Turn on backlight when LVDS panel is powered up + + In some configurations, the LVDS may be off at startup along with the + backlight. So when turning the LVDS on for the first time, we may also need to + set the backlight to a non-zero value. So try to use the saved value if + possible, but if it's zero, make the backlight full brightness when turning on + the LVDS. + + Note that this is slightly sub-optimal for configurations where zero is a valid backlight brightness. + + Fixes fdo bz #13958. + +commit b5cf8faf8102e6313c23de87a680cc327ac95478 +Author: Jesse Barnes +Date: Thu Jan 10 14:25:18 2008 -0800 + + Remove unnecessary quirk code in CRT probing + + Since we return early in the CRTC DPMS code, keeping the pipes & clocks + enabled, this code is no longer necessary. As an added bonus, VGA connections + should be reported correctly even when the pipe A quirk is active. + + Updates fix for fdo bz #11432. + +commit 3c22ed633be2ac96eea7bc533839e956f1f31b84 +Author: Jesse Barnes +Date: Wed Jan 9 09:47:38 2008 -0800 + + Add pipe A force enable quirk + + On some platforms, the firmware may read & write GPU registers on lid close, + suspend/resume time or during various SMM events. If one of the graphics pipes + is disabled at that time, the GPU may hang due to the programming dependencies + of the various registers. + + This patch adds a quirk to force the driver to keep pipe A enabled if + necessary, through user configuration in xorg.conf or via a platform specific + quirk. Leaving the pipe enabled comes at a power cost however, so the quirk + should only be enabled when strictly necessary. + + Fixes https://bugs.freedesktop.org/show_bug.cgi?id=11432. + +commit d3b41bcf231a6ffd289c128c06aa619f554a776c +Author: Zhenyu Wang +Date: Wed Jan 9 21:28:25 2008 +0800 + + Disable frame buffer compression on new chipset now. + +commit 2f0c0427dc4113bac64cda07c6365df1f0637697 +Author: Zhenyu Wang +Date: Wed Jan 9 21:27:42 2008 +0800 + + Update PIPELINE_SELECT instruction and surface state format for new chipset + +commit 139e9affdd49dcbe08e260a0a2bd001de16566e6 +Author: Zhenyu Wang +Date: Wed Jan 9 21:26:57 2008 +0800 + + GTT access change for new integrated graphics device + +commit 4f288ff2d1e7d28bf49167f073fbce21492a7c32 +Author: Zhenyu Wang +Date: Wed Jan 9 21:25:47 2008 +0800 + + Add new integrated graphics chipset ids + +commit f089942689df622b1af00569eade4883a84eb7a3 +Author: Zhenyu Wang +Date: Thu Jan 3 11:28:18 2008 +0800 + + Change origin i965G_1 to chipset market name G35. + +commit 71143200ed66cb9dcc1f9edf98128be80b05619c +Author: Jesse Barnes +Date: Fri Jan 4 15:01:25 2008 -0800 + + Don't modify low bit of BLC_PWM_CTL when using combo backlight control + + On some platforms, the low bit of BLC_PWM_CTL is wired as a 'max brightness' + flag, rather than a regular part of the backlight duty cycle. So when in the + combo mode, divide the total number of backlight levels available by two + (tossing one bit) and adjust the programming in the set_brightness routine. + + Note that platforms with this behavior may need quirks added so that they work + by default. + +commit b434bf4029d1a405216454629bcea717c779ae5a +Author: hulifox008 +Date: Fri Jan 4 02:46:54 2008 -0800 + + Fix copy'n'paste-o in unused airlied i2c code. + +commit f2ffc0f6e038357dda268363e52c11ada1d0b810 +Author: Jesse Barnes +Date: Thu Jan 3 11:16:15 2008 -0800 + + Fix compilation error when not using DRI + + This patch complements 88f8b688e2316ae4a1f7485f0010ce90de54783a which + added uint64_t typed variables to avoid unsigned long overflows in + 32-bit architectures but didn't include with the required + definition. + + When XF86DRI and _XF86DRI_SERVER_ are defined this header gets + indirectly included through "i830_dri.h", thanks to "i830_common.h" + which masquerades this problem as released in 2.1.0 and that manifests + with : + + In file included from i810_driver.c:88: + i830.h:137: error: expected specifier-qualifier-list before 'uint64_t' + i830.h:240: error: expected specifier-qualifier-list before 'uint64_t' + + Patch from Carlo Marcelo Arenas Belon + +commit a03aca101d4d51ed2279a99d1137ce3b7ef364e2 +Author: Zhenyu Wang +Date: Wed Jan 2 14:11:31 2008 +0800 + + xvmc: setup driver info for XvMCGetDRInfo request + + User don't need to have XvMCConfig file then, if ld.so can + find libIntelXvMC.so in ld path. + +commit 0fd769b5882058e5ebf17ee1c1e35b4a3d46e6b0 +Author: Zhenyu Wang +Date: Wed Jan 2 13:57:23 2008 +0800 + + xvmc: add context id info in debug/trace + +commit 83d304c61ad5fdc58b0a9309dbd1e5a3f6cd9b01 +Author: Nanhai Zou +Date: Wed Jan 2 10:50:44 2008 +0800 + + TV: fix 576p refresh rate + +commit a2bb2afd24c95e056b801c85dc12daeac54b37f0 +Author: Zhenyu Wang +Date: Fri Dec 28 15:52:12 2007 +0800 + + xvmc: move drmOpen earlier + + remove wrong comments + +commit 96246c27cb836bae8ee02c46c68a1f2102efd14b +Author: Joakim +Date: Thu Dec 27 17:09:02 2007 +0800 + + Aopen Minipc 965GM LVDS quirk + +commit 666e01bd426a553f23eeb5040ecbc28b4abb87da +Author: Zhenyu Wang +Date: Wed Dec 26 09:51:09 2007 +0800 + + xvmc: add info in intel.man + +commit e75d0c20e3b02f649b62ac9da7f41bb43d0f3d80 +Author: Zhenyu Wang +Date: Wed Dec 26 09:37:34 2007 +0800 + + xvmc: make XvMC default on + +commit ed9ff6f30fff33fe2d60715f1b503047f8e1ef01 +Author: Zhenyu Wang +Date: Tue Dec 25 08:32:47 2007 +0800 + + xvmc: consolidate put surface interfaces + + Make surface list track like context list, and move + generic PutSurface code out of i915. So MC driver just + needs to fill specific the command params, and we can + get one single type of intel xvmc command to issue, + ddx driver's put_image_size got removed. + + Fix last commit with missing XvMCContext assignment. + + Fix priv_data free with apropriate X11 XFree. + +commit f0ced5edaeec3e7741828eab728417843326d56f +Author: Zhenyu Wang +Date: Mon Dec 24 10:53:57 2007 +0800 + + xvmc: store XvMCContext pointer instead of context_id in internal ctx list + +commit 216ad7398742f2f80b5477e89f827acb351b4d72 +Author: Zhenyu Wang +Date: Thu Dec 20 13:39:32 2007 +0800 + + xvmc: add disable xvmc build support + + Move xvmc source files under XVMC config + +commit a811ca30659e8c477027ea9c91fb9fc516fdabc7 +Author: Zhenyu Wang +Date: Thu Dec 20 13:08:07 2007 +0800 + + xvmc: handle surface create/destory in generic code + +commit 5f961f28310a1cd19967df2034b0452bf4446394 +Author: Zhenyu Wang +Date: Thu Dec 20 12:51:06 2007 +0800 + + xvmc: move dri context handling to generic code + + Use XvMCContext's context_id for dri context handling instead + of driver private id. Remove unnecessary field for i915 private + structs. + +commit 73827e78357ab3f30a21f159ecdfb26dd0ea889b +Merge: 3cf8627 f69b48f +Author: Zhenyu Wang +Date: Wed Dec 19 22:47:02 2007 +0800 + + Merge branch 'master' into xvmc + +commit f69b48fe24ef94dac44b8123884ca71df675be4b +Author: Jesse Barnes +Date: Tue Dec 18 18:10:33 2007 -0800 + + Unconditionally restore pipe configuration + + This is a partial fix for #13196, which covers both leaving pipes disabled at + server exit time and problems with restoring the pipe configuration on certain + chipsets. It restores the pipe configuration unconditionally (previously we + made sure the PLL was running and we weren't in VGA mode) but also adds some + additional PLL settle time to the PLL register write paths. + +commit 4757a218d733af12d04674455fc6e1fad48a1cd0 +Author: Michel Dänzer +Date: Tue Dec 18 19:37:46 2007 +0100 + + Always set pPriv->buf to NULL after freeing the memory it pointed to. + + Fixes https://bugs.freedesktop.org/show_bug.cgi?id=13108 . + +commit 5cbb4110116f6d4187fd27660a78203caa1da46b +Author: Adam Jackson +Date: Thu Dec 13 15:10:43 2007 -0500 + + i830_sdvo_mode_valid: Fix return values to match what we actually check. + +commit e03bc385e924222d3d5f3c9a8d65e1ef63b858dc +Author: Jesse Barnes +Date: Tue Dec 11 13:28:01 2007 -0800 + + Add cscope files to .gitignore + +commit e720ae4476c3f986f623ce0f0ab9775b8b9b7e05 +Author: Jesse Barnes +Date: Mon Dec 10 13:00:14 2007 -0800 + + CRT hotplug detection improvements + + Patch from Hong Liu. + + Fixup CRT detection by making sure the pipe is enabled before CRT + detection actually occurs. Fixes bugs Hong was seeing on G35 and other + machines. + +commit d9df93578b74785c08ba860b4c9aa23b0c89c91c +Author: Dave Airlie +Date: Mon Dec 10 16:41:24 2007 +1000 + + ivch: fails on address mismatch as I seem to get this on my 865 system + +commit cd6f83519c69f72f146fea59afbd6a3542da783a +Author: Zhenyu Wang +Date: Mon Dec 10 05:49:58 2007 +0800 + + Fix tv quirk for Dell Latitude X1 + + which is actually 915GM, reported by + Andreas Schildbach + +commit 13ec9c8141a9f794258869a04a6bab59dac5eefa +Author: Zhenyu Wang +Date: Sun Dec 9 00:52:13 2007 +0800 + + exa: fix rendering issue on some 855GM laptops + + This trys to initialize more 3d states on i830 like mesa + code, which fixes exa rendering failure for some 855GM users. + +commit e2d9fd6425584119f28768d85c4b7d106ecf8742 +Author: Jesse Barnes +Date: Fri Dec 7 16:30:46 2007 -0800 + + Describe output properties in more detail + + Add descriptions for LVDS and TV output properties and also mention the EDID + property a new output configuration section. + +commit 6f92200db39a790c95c1fac64baf0bd41a70e481 +Author: Jesse Barnes +Date: Wed Dec 5 08:10:17 2007 -0800 + + Fix backlight setting save/restore + + We need to save the current backlight value at LVDS init time, as well as when + we change the DPMS setting. Also, since 0 is a valid backlight value, don't + set the backlight value to maximum at startup if the value happens to be zero. + + These fixes should make the backlight user experience much more consistent and + hopefully less frustrating. + +commit 4c1fa5235555c9ef3de1eebd006c4e91283362bf +Author: Jesse Barnes +Date: Tue Dec 4 18:27:24 2007 -0800 + + Add BCM_ to backlight control method enums + + Avoids polluting the global namespace with such generic terms. + +commit 30d74f1b1f30e751d2c47aa63a4a2043e71467dc +Author: Jesse Barnes +Date: Tue Dec 4 18:23:44 2007 -0800 + + Use "LEGACY" backlight method if backlight control is such + + This may regress the user experience a bit (fewer backlight levels) on machines + where both the LBB and native registers work, but it's better that it work for + everyone than work extra well for some and not at all for others. + +commit 0e554e6dd4da56be24d2f971ff4cd4d585936724 +Author: Eric Anholt +Date: Tue Dec 4 10:32:45 2007 -0800 + + Remove extra have_libpciaccess=no that broke tools build with old servers. + +commit 3cf862717688aa679b5e667cd041ddd6f5db0b58 +Author: Zhenyu Wang +Date: Thu Nov 29 23:12:16 2007 +0800 + + xvmc: add "XvMC" option, default is false. + +commit 6da4b7a80cdf730018435fe84485ecdad62bc860 +Author: Zhenyu Wang +Date: Thu Nov 29 22:56:13 2007 +0800 + + xvmc: move batch buffer init/fini code into generic + +commit 75ef3e669dac1259d282dcc8f54b197fc19f22b3 +Author: Zhenyu Wang +Date: Wed Nov 28 22:13:55 2007 +0800 + + Replace ALLOCATE_LOCAL/DEALLOCATE_LOCAL with xalloc/xfree + +commit df47b7ba57f3e7dc8bac1898679186d9d48639ac +Merge: df718a7 7f9ceff +Author: Zhenyu Wang +Date: Tue Nov 27 01:13:43 2007 +0800 + + Merge branch 'master' into xvmc + +commit 7f9cefffbf44a2d07b51cc13aaf2d54fcd8f2f22 +Author: Alan Hourihane +Date: Fri Nov 16 15:56:08 2007 +0000 + + vendor is CARD8 + +commit df718a77c854c9110a81c2bc2a32a9aac85850f2 +Author: Zhenyu Wang +Date: Fri Nov 16 16:08:06 2007 +0800 + + xvmc: add xvmc decoder type string + +commit a03a758db0df615fbb44dae1ab6910bfeaeb54f9 +Author: Zhenyu Wang +Date: Fri Nov 16 15:49:10 2007 +0800 + + xvmc: move some i915 context destroy code to generic function + +commit 7bfbcb4dc7806ae7543f230373e67f35ba30668d +Author: Zhenyu Wang +Date: Fri Nov 16 15:43:04 2007 +0800 + + xvmc: clean batch buffer finish + +commit a6e8f4ef0481c66fda4f22fcc4bb0ef9c000f0cd +Author: Zhenyu Wang +Date: Fri Nov 16 13:51:44 2007 +0800 + + xvmc: remove i915 drm map type + +commit 4a2b0f340357c4ca58dc9586fad1337b83966362 +Author: Jesse Barnes +Date: Thu Nov 15 18:36:54 2007 -0800 + + Fix typo in 1920x1080 resolution entry + +commit 6c68fcc93917565712b6a9386df54d0204e4ea8f +Author: Zhenyu Wang +Date: Fri Nov 16 10:04:46 2007 +0800 + + xvmc: more i915 xvmc cleanups + +commit 04b60b6d3436fb57163c23acf335364f0ea2f79c +Author: Jesse Barnes +Date: Thu Nov 15 11:49:53 2007 -0800 + + Bump version to 2.2.0 + +commit 6eecef4fed8a21dfdabef42eb69fd150b96167b2 +Author: Jesse Barnes +Date: Thu Nov 15 10:10:59 2007 -0800 + + Adjust default TV out paramaters + + According to several users, a default brightness of 0 results in much better TV + output. Improved control of these parameters will be provided by Randr1.3, + which will standardize several output properties across various chips. + +commit 7552d80e367fe38bbc594fe94abd649917fe54d5 +Author: Jesse Barnes +Date: Thu Nov 15 10:07:34 2007 -0800 + + Add 1920x1080 mode to TV out + + Allows users to use 1080p modes on TV out, see bug #13034. + +commit e56c166ceb8c1ceddd5020e8de2d0b9d51f535a4 +Author: Zhenyu Wang +Date: Thu Nov 15 18:34:18 2007 +0800 + + remove unnecessary i830_reg.h includes + + i830_reg.h only contains 3d engine cmds for 8XX chips. + +commit 6f3de19159cd7a2d73ed212add909edb3aedce9c +Author: Zhenyu Wang +Date: Thu Nov 15 18:33:27 2007 +0800 + + Move fb compression reg definition into i810_reg.h + + where we put MMIO control reg in, and shared with intel_reg_dump + program. + +commit 1ff97991a4954d508cc260dda82b7678010d13c9 +Author: Zhenyu Wang +Date: Thu Nov 15 17:01:31 2007 +0800 + + xvmc: intel_xvmc.c cleanups + +commit 1cfdf192882b856bfc93b735cfb9cb813cac3fdb +Author: Zhenyu Wang +Date: Thu Nov 15 16:38:21 2007 +0800 + + xvmc: remove unused SAREAPTR macro + +commit d9ea2fbdcce3c7c91428846eff43b65ac340f38d +Author: Zhenyu Wang +Date: Thu Nov 15 15:25:35 2007 +0800 + + xvmc: i915 rename files + +commit 06c0579df8d45f7f04b96956353d5f86cf59148f +Author: Zhenyu Wang +Date: Thu Nov 15 15:01:56 2007 +0800 + + xvmc: some code clean up + +commit 4983e3401390654098dbf99dcfb45bab060b068c +Author: Zhenyu Wang +Date: Thu Nov 15 13:56:24 2007 +0800 + + xvmc: move locking code into generic place + +commit bcd656c8dfe7309a5cf02ce1da8bc747ccd6e21c +Author: Zhenyu Wang +Date: Thu Nov 15 11:18:38 2007 +0800 + + xvmc: oops, should first map batch buffer before init + +commit 0464af581b0fcfc4d1c7fec8160d812262086177 +Merge: 2256519 e56c166 +Author: Zhenyu Wang +Date: Thu Nov 15 11:05:44 2007 +0800 + + Merge branch 'master' into xvmc + +commit 22565198b360826ba10e7ca05d272c419054dc08 +Merge: 619044b e64f492 +Author: Zhenyu Wang +Date: Thu Nov 15 18:53:22 2007 +0800 + + Merge branch 'master' into xvmc + +commit e64f4929690a57701241334fbca17e95b39ba3d4 +Author: Jesse Barnes +Date: Wed Nov 14 16:44:34 2007 -0800 + + Backlight fixes + + Open the "actual_brightness" file as read only, since we only read from it. + Also set an initial backlight_duty_cycle at init time so we don't set the + brightness to 0 at startup. + +commit 53e3693ef13f31f3fc33bcff7286ab2b03b2d430 +Author: Jesse Barnes +Date: Wed Nov 14 16:24:56 2007 -0800 + + Disable FBC by default on 965GM + + Several people have reported that they see frequent FBC related display + corruption on 965GM, so disable it for now. Users wanting to enable it can use + the driver option "Framebuffercompression" to override the default. + +commit b2726899bc6ebd108aa4a5dd66fe1d881bb778b3 +Author: Jesse Barnes +Date: Wed Nov 14 15:49:41 2007 -0800 + + Add more FBC regs + + Needed for the new debug code + +commit b7bc694c6b98dac17763426d905a22d3ae17a018 +Author: Jesse Barnes +Date: Wed Nov 14 15:46:57 2007 -0800 + + Fix kernel get_brightness function + + We need to look at "actual_brightness" rather than "brightness". The former + contains the brightness value the kernel driver has actually set, while the + latter is merely what the user requested. + +commit 9ee96ed02aacd953ab58288fddf0fa60f60b668e +Author: Jesse Barnes +Date: Wed Nov 14 15:44:56 2007 -0800 + + Correct FBC debug message + + To be consistent, it should say 'plane' rather than 'pipe'. + +commit 675b9471d84059496ca41d427a4f95d419f82be9 +Author: Jesse Barnes +Date: Wed Nov 14 15:17:05 2007 -0800 + + Add FBC registers to register dump output + + Just for completeness. + +commit a2a0821e74a61f53cc7f0c41ce629644ad712114 +Author: Jesse Barnes +Date: Wed Nov 14 11:30:20 2007 -0800 + + Don't stop ring before restoring hw state + + Some of the hw state restoration callbacks may want to use the ring for various + things like stopping video playback, so leave the ring enabled until we get + back from RestoreHWState. Also rename the functions so that their purpose is + clearer and remove a couple of redundant lines. + +commit 619044b242d4abf605b42cfff538b63f445fe709 +Author: Zhenyu Wang +Date: Thu Nov 15 02:23:07 2007 +0800 + + xvmc: move batch buffer init/fini to intel_batchbuffer.c + +commit ae805ac379ccfdae9ee272896665e73f5bc7d2cf +Author: Zhenyu Wang +Date: Thu Nov 15 02:13:07 2007 +0800 + + xvmc: take out batch buffer handling code + +commit ad3bc0158d37e98fcbbe6a8e31413c142a260424 +Author: Zhenyu Wang +Date: Wed Nov 14 22:46:46 2007 +0800 + + Don't enable fbc with XAA or tiling is off. + + This slightly reworks my last fbc patch. We don't + support tiled front buffer with XAA now, so also + disable fbc on it. If tiled alloc failed, disable + fbc too. + +commit 26194e19e1c80615697016e25640d4c8c244353f +Author: Keith Packard +Date: Tue Nov 13 22:26:40 2007 -0800 + + Review PLL spreadsheet and update register ranges. + + The PLL spreadsheet makes the precise register ranges allowed for each mode + quite clear, and shows a few inaccuracies in the b-spec. In particular, the + N register value may range from 1 to 6 instead of 3 to 8. This should close + the gap we've seen in the reachable frequencies. + +commit 581509321e51becb8ee6ddcfaa15a2a713c9ef8e +Author: Zhenyu Wang +Date: Wed Nov 14 22:16:04 2007 +0800 + + Remove one redundant line. + +commit 8cea3c8cfa86600b5f2c3e1f21c19d4b2a320fd4 +Author: Zhenyu Wang +Date: Wed Nov 14 22:13:30 2007 +0800 + + Don't setup fb compression if fb is not tiling + +commit 539b669d6e23833a917a9b0d3a355d4283e0b76a +Author: Jesse Barnes +Date: Tue Nov 13 17:59:54 2007 -0800 + + Remove harmless error message + + This really isn't an error in general. If vblank pipe setup really fails for + some reason, it'll be obvious enough when the user tries to use vblank events + for something. + + Patch from Hong Liu. + +commit e8db8584ae4860aa991c916126335b287a972d5b +Author: Zhenyu Wang +Date: Wed Nov 14 00:11:20 2007 +0800 + + xvmc: attempt to move batch buffer code out of i915 private + +commit 11c0e0dbef42f1ae77a77d534870d3e9821fb017 +Merge: c838f72 43fbc54 +Author: Zhenyu Wang +Date: Tue Nov 13 22:44:06 2007 +0800 + + Merge branch 'master' into xvmc + +commit 43fbc547786cf26514f95bce79fab58a66c291bf +Author: Jesse Barnes +Date: Mon Nov 12 12:23:41 2007 -0800 + + Improve backlight control + + This commit fixes backlight support for several platforms. + + Except on recent machines supporting the IGD OpRegion specification, + backlight control is rather platform specific. In some cases, we can + program the native backlight control regsiters directly without any + trouble. On others, we need to use the legacy backlight control + register. On still others, we need a combination of the two. And on + some platforms, none of the above will work, so we go through the + kernel backlight interface, which provides a platform specific driver + for backlight control. + +commit 10988c5e6ec0f3c40d56bbf209b7976627cca706 +Author: Jesse Barnes +Date: Mon Nov 12 09:19:22 2007 -0800 + + Fix typo in PLL enable check + + Check against DPLL_A instead of DPLL_B before writing PIPEACONF. + + Thanks to Colin Guthrie for his sharp eyes. + +commit ab2055ebb20aa6de121fa377e488ce91913035ae +Author: Jesse Barnes +Date: Fri Nov 9 13:55:46 2007 -0800 + + Add 'ret' variable to i830_allocator_init + + Needed in the XF86DRI_MM case. + +commit 24280edbdf54e9559b26ea27c1b005eea73f51bc +Author: Jesse Barnes +Date: Fri Nov 9 13:53:58 2007 -0800 + + Fixup warnings + + Remove unused 'ret' variable, move pI830 under #ifdef XF86DRI_MM in + i830_allocate_memory. + +commit 4fe507957bf826d81a71cd63af17c5547d1023a1 +Author: Jesse Barnes +Date: Fri Nov 9 13:51:11 2007 -0800 + + Remove unused 'palette_enable' variable + +commit 62404a9c9c0d98efb69ac96209dea17331e0489c +Author: Jesse Barnes +Date: Fri Nov 9 07:55:01 2007 -0800 + + Update man page to reflect EXA by default + +commit c838f7297f675ea9d82678ed37715955cb0a8a78 +Merge: a9449ff 6f53568 +Author: Zhenyu Wang +Date: Fri Nov 9 19:37:07 2007 +0800 + + Merge branch 'xvmc' of git+ssh://zhen@people.freedesktop.org/~zhen/xf86-video-intel into xvmc + +commit a9449fff4be8e6b3cc82914376420e3a66b960f5 +Merge: a470f6b 177924e +Author: Zhenyu Wang +Date: Fri Nov 9 19:36:25 2007 +0800 + + Merge branch 'master' into xvmc + +commit 177924e879564b7e9e70fd607141978bfd053fff +Author: Jesse Barnes +Date: Thu Nov 8 18:16:48 2007 -0800 + + Bump driver version to 2.1.99 in preparation for 2.2 release + +commit cb4e5796f0537ea5e0e646d473930c7b826c85d8 +Author: Jesse Barnes +Date: Thu Nov 8 18:13:47 2007 -0800 + + Default to EXA + + If EXA is compiled into the driver, default to using it for acceleration. + Hopefully we can remove XAA entirely one day. + +commit 43a59ab26b09fcc24de1ed7bd770bb622f899ceb +Author: Jesse Barnes +Date: Thu Nov 8 16:52:41 2007 -0800 + + Clear current video crtc on DPMS off + + When calling the video DPMS off function, make sure we zero out the current + crtc so that it will be properly re-set up next time video is turned on. + + Fix from Peter Clifton with changes by Keith Packard. + +commit e784e152a8e84b6e447b55a5c7019e7b47e17621 +Author: Jesse Barnes +Date: Thu Nov 8 16:37:53 2007 -0800 + + Fix overlay destination clamping + + The overlay width & height scaling clamp check was reversed. Fix that and + update the comment. + +commit b8770f710729d616b3ac72544aa522161a78f819 +Author: Jesse Barnes +Date: Thu Nov 8 16:19:01 2007 -0800 + + Setup 3D state at EnterVT time + + In the absence of full suspend/resume support in the kernel, we have to + save/restore state in Enter/LeaveVT. For 8xx chips, 3D state may be lost + during suspend/resume, so re-emit the basic setup at EnterVT time. + + Patch from Peter Clifton. + +commit 5f92b4c2db9712496b829ee239468e3d14e27d2f +Author: Eric Anholt +Date: Thu Nov 8 13:31:51 2007 -0800 + + Bug #12059: Add ch7019 to the list of supported devices for ch7017. + + While I'm here, fix the chip description to be LVDS instead of TMDS in i2c + device. + +commit eecd3ccedee6c4acf101591f7e60673660379e62 +Author: Jesse Barnes +Date: Thu Nov 8 09:31:08 2007 -0800 + + Check DPLL status before writing PIPEnCONF regs + + If the DPLL isn't enabled or is in VGA mode, writing the PIPEnCONF registers + may cause a hang or crash. So ensure the DPLL is in the proper state before + writing them. + + Another excellent fix from Peter Clifton. + +commit b434c1a437c407de88396b219560649c2dae82b2 +Author: Jesse Barnes +Date: Thu Nov 1 12:06:07 2007 -0700 + + Framebuffer compression fix: front buffer may not be at fence 0 + + Fix a long standing bug in the framebuffer compression code (thanks to + Pierre Willenbrock!) that prevented FBC from working correctly if the front + buffer was anywhere but fence register 0. + +commit 50d3693a6862028e50bc5ba8c788e7ea573c3eb8 +Author: Zhenyu Wang +Date: Thu Nov 1 22:22:27 2007 +0800 + + Fix allocation reset for really not free BO allocator + +commit ecd995d533d28b622afc71a20504d47c33ff5b8d +Author: Alan Coopersmith +Date: Tue Oct 30 18:20:49 2007 -0700 + + Fix builds without DRI + +commit 7c88b58a93fce9fda59b6344acb87af16336e287 +Author: Alan Coopersmith +Date: Tue Oct 30 18:20:15 2007 -0700 + + Clear compiler error: "void functions cannot return values" + +commit a470f6b2ca291e305979dd9223885a50dc0b334b +Author: Zhenyu Wang +Date: Fri Oct 26 22:40:47 2007 +0800 + + try to move some fields to xvmc driver structure + + Still a lot of things to move include batch buffer, lock, context, + surface resource handling, etc. + +commit 6f53568cd2aeeec6bd8c1f1d9f9c5ecadc5c62f9 +Author: Zhenyu Wang +Date: Fri Oct 26 14:58:43 2007 +0800 + + Fix DRI context creation for XvMC + +commit d2c78f82c20f33fc9c22cab8a7ca161e57a34bf8 +Author: Thomas Hellstrom +Date: Wed Oct 24 19:34:12 2007 +0200 + + Adapt to DRM Lockfree and setStatus changes. + +commit 78aaec0ffc711742bf8ad77757ed8c15cc3f7a9f +Author: Eric Anholt +Date: Wed Oct 24 11:50:54 2007 -0700 + + Fix typo in my hand-application of rglowery's patch. + +commit 021265fbec9fd4ee31bdc9767c0c0453479ea22c +Author: Rob +Date: Wed Oct 24 11:06:53 2007 -0700 + + Fix a crash in TV mode handling by initializing the prev field of modes. + +commit ce9802edd25255f6c9c11e512b2ef905384b914d +Author: Zhenyu Wang +Date: Wed Oct 24 00:31:53 2007 +0800 + + fix xvmc return values + + Use values defined by xvmc lib spec + +commit 9c84543eb0fde4643eb7529eb6b08eacf57c12d0 +Author: Zhenyu Wang +Date: Tue Oct 23 22:16:55 2007 +0800 + + add missing license header for new files + +commit 87345e820d20f1a98216c52e156c2e18c15ffa44 +Author: Jesse Barnes +Date: Mon Oct 22 14:22:37 2007 -0700 + + intel_reg_dumper - dump VGA AR registers too + + Add a VGA AR dumping function so we can debug text mode problems too. + +commit 90e4eafdf59edd966ed626107c3909b24737da8d +Author: Zhenyu Wang +Date: Mon Oct 22 17:09:15 2007 +0800 + + revert xvmc memory allocation hacks + +commit 167c56bcf82f0a6d72151b202e6d56f6e0d627f6 +Merge: fc9368c 78e251d +Author: Zhenyu Wang +Date: Tue Oct 23 00:12:22 2007 +0800 + + Merge branch 'master' into xvmc + +commit fc9368ce7dacd52ef222559d20188ddcf2a85df5 +Author: Zhenyu Wang +Date: Tue Oct 23 00:09:06 2007 +0800 + + split xvmc user lib chipset drivers + +commit 78e251db671e21bc859c9b505d391b70babee2dc +Author: Eric Anholt +Date: Fri Oct 19 15:04:10 2007 -0700 + + In the clock graph, draw the VCO as erasures in the lines representing clocks. + + This shows one of the reasons for the gaps: with the other settings, the VCO + is too low inside the gap. However, it also points out another issue: we + aren't using the high end of the VCO range due to some other limits being hit. + +commit 9f9b888525b274036d301d6e06351583d0415f9e +Author: Eric Anholt +Date: Thu Oct 18 11:25:24 2007 -0700 + + Warn in the log if we choose a PLL clock that's way out of line. + +commit 1f8bf110394cc1df66aae9acf5c818145ae19b52 +Author: Eric Anholt +Date: Thu Oct 18 11:17:38 2007 -0700 + + Add some nickle scripts for looking at PLL issues. + + While here, move similar nickle scripts under src/scripts/ + +commit 79636b8c776ae024518103c9fa137c8498c21d48 +Author: Eric Anholt +Date: Wed Oct 17 17:10:24 2007 -0700 + + Bump pciaccess version requirement for new API usage. + +commit c824c45e72908b5b3fa832fec91c7b47f305180c +Author: Dave Airlie +Date: Wed Oct 17 16:35:29 2007 +1000 + + intel: make block handler hook happen no matter what video is in use + + This shouldn't make a difference now, but for upcoming EXA/batch changes it + will be more useful + +commit aa88d23e615e7f154cf850927a0a7bb9fbb0d2f9 +Author: Rob +Date: Wed Oct 17 09:19:19 2007 +0800 + + AOpen 965GM mini pc has no LVDS + +commit 38900f55e2b50ea383f78adb016e3a02c3bd17ad +Author: Kyle McMartin +Date: Tue Oct 16 16:38:28 2007 -0400 + + toshiba satellite u300 has no tv out + +commit 74ac5de14ebb77aeb39d698e9e8d188c9d9abd76 +Author: Michel Dänzer +Date: Tue Oct 16 15:08:26 2007 +0200 + + Adapt to libdrm buffer object API changes. + +commit d66e924680a3504aa1feb9c228145a95d1a16b1e +Author: Eric Anholt +Date: Mon Oct 15 11:31:51 2007 -0700 + + In update_front_offset(), set pScrn->fbOffset even at EnterVT during init. + + Failure to do so led to the memset() at EnterVT being done to an invalid + offset. + +commit cc892d1ba1d87d08bdd04f857efc6b8f64620018 +Merge: b52ce0b fd97edb +Author: Zhenyu Wang +Date: Mon Oct 15 22:09:14 2007 +0800 + + Merge branch 'xvmc' of git+ssh://zhen@people.freedesktop.org/~zhen/xf86-video-intel into xvmc + +commit c94cdfd6ddbc580523737f596e97b96a7ce100b9 +Author: Jesse Barnes +Date: Sat Oct 13 15:57:45 2007 -0700 + + Fix palette save/restore + + When restoring the palette, we weren't checking to make sure the + associated pipe was enabled before writing the registers. In some + configurations, this led to a driver crash. Add new routines to handle + palette save/restore and verify that the pipes are on before we touch + the registers (could easily be changed to enable/disable the pipes + around the save/restore as well). + +commit e04333a6352040bc883655d606923c912d005981 +Author: Eric Anholt +Date: Fri Oct 12 12:42:45 2007 -0700 + + Fix failure in tiling setup on non-power-of-two allocations on pre-965. + +commit a1612b7728d4153499fe86b6713a13c8702cc7d9 +Author: Eric Anholt +Date: Fri Oct 12 12:42:06 2007 -0700 + + Use mprotect on unbound AGP memory to attempt to catch use while unbound. + + This doesn't help with the most common use-while-unbound cases, which are + from the hardware side. + +commit 3af442ba52550a9d183e215d49cc12dac0cb9e4b +Author: Eric Anholt +Date: Thu Oct 11 11:56:06 2007 -0700 + + Don't double-free the memory manager allocation. + +commit 6c485ff5bd25e9aa6a3c1eb669843e6b969d94df +Author: Eric Anholt +Date: Fri Oct 5 15:52:56 2007 -0700 + + Update memory manager sizing for the current set of LIFETIME_FIXED bufffers. + +commit d47cf148776d74f9035863b23eefdc2b5893af08 +Author: Eric Anholt +Date: Fri Oct 5 15:45:51 2007 -0700 + + Move tiling fence register setup to bind time instead of allocate time. + + This allows us to allocate tiled buffers in buffer objects. In the process + I removed the fence division that we had for tiled buffers on pre-965. If we + resurrect that code, it should probably be managed by just dividing all the + objects in roughly half and fencing those halves (to reduce the alignment + requirement), instead of using giant fences until we run out of space and then + trying to deal with scarce space on the last (or not) buffer. Halving + our tiled objects would use 6/8 of our fence registers on that hardware. + +commit a6dc81a0864f9ab2f6fc1aa31002c0191f674ceb +Author: Eric Anholt +Date: Fri Oct 5 12:37:19 2007 -0700 + + Allow front/back/depth to move over the lifetime of the server. + +commit 132dce7565feeea1055899f8c1627766fe84c88c +Author: Eric Anholt +Date: Fri Oct 5 12:12:06 2007 -0700 + + Delay SAREA and mapping setup until EnterVT when using the memory manager. + + Otherwise, we would use uninitialized offsets in the early setup. + +commit 4ca3550fb7d488741f8dc1ba3c8722393277c3b8 +Author: Eric Anholt +Date: Thu Oct 4 17:02:15 2007 -0700 + + Rework DRI buffer mappings and sarea setup to allow for moving buffers. + + While this has been a desired feature for some time, to allow for reallocation + of the front buffer, it was made more necessary by the desire to avoid + requiring a NO_MOVE buffer type in TTM because buffer objects may not be left + pinned over VT switch. This is a step towards making those buffers + movable and resizable. + +commit f393a12d21eed668cf4771f022beded9a4c547c7 +Author: Eric Anholt +Date: Thu Oct 4 13:03:14 2007 -0700 + + Move drmMMLock to after we have unbound our (pinned) buffers. + + There are still issues due to the fact that we're allocating + NEED_LIFETIME_FIXED memory as buffer objects, which we refuse to unpin because + we have no way of pinning it back in the same location. + +commit 8fc4e3078210f726c7c375faa2f2fd8d05017c09 +Author: Eric Anholt +Date: Fri Oct 5 11:51:55 2007 -0700 + + Refuse to allocate LIFETIME_FIXED objects in buffer objects. + + We can't guarantee the offset will stay the same using the current DRM + interface, but the correct solution is fixing our code to allow these objects + to move. Breaks TTM mode of the DRI driver for now. + +commit 0de747f7d219a56434dad49a8a6d1d9d4c251ca7 +Author: Eric Anholt +Date: Thu Oct 11 10:36:01 2007 -0700 + + In i830_allocate_memory_bo, bind if we control the VT, not on lifetime-fixed. + +commit 0040bb95445e800af80ca9fa1b92f5db33f1b4ac +Author: Eric Anholt +Date: Wed Oct 10 16:48:12 2007 -0700 + + Fix potential use-after-free in XV overlay code on video stop. + +commit 56ae767180da4a8bd4b7a4c35b92e019ab67d753 +Author: Zhenyu Wang +Date: Thu Oct 11 10:09:29 2007 +0800 + + Revert "Fix G33 GTT stolen mem range" + + This reverts commit 2a8592f2ebcba86b1127aa889155d58a3dc186ca. + + This causes compat issue between ddx and kernel apggart version. + Revert it as it shouldn't hurt normal people's default GTT size, + but if you change it to 1MB in bios, it's supposed to be broken now. + +commit 5faee02e97b7543b41bb1f8e3751558c48802833 +Author: Zhenyu Wang +Date: Wed Oct 10 13:55:30 2007 +0800 + + EXA: fix tiled dest rendering on i8XX chips + +commit 5bbe9f09fda1238da04e6b584813d40fc646f49d +Author: Keith Packard +Date: Wed Oct 3 00:18:25 2007 -0700 + + Include xf86mm.h if using XF86DRI_MM + + This header file doesn't appear to be getting automatically included for + some reason. + +commit 41dacf97ec1d4ba6f54057f4fcc7bb76033a454e +Author: Keith Packard +Date: Wed Oct 3 00:17:41 2007 -0700 + + Quirk for Samsung Q35 which has no TV output. + +commit b52ce0bd178c268d20334e2be8fad46037e47499 +Author: Zhenyu Wang +Date: Mon Oct 8 22:56:44 2007 +0800 + + use field name to initialize i915 xvmc driver + +commit e0fb228401b10ea4281eee48497bf1d584999705 +Merge: 84d7b2b 9e770bf +Author: Zhenyu Wang +Date: Mon Oct 8 22:45:11 2007 +0800 + + Merge branch 'master' into xvmc + + Conflicts: + + src/i830_driver.c + +commit fd97edb62463e50a1860290d54684a68d5490bdc +Author: Zhenyu Wang +Date: Mon Oct 8 16:13:26 2007 +0800 + + move some definition out of i915 specific header + +commit 3a2b5222341b37322b788e329c2b9006dc14ecfd +Author: Zhenyu Wang +Date: Mon Oct 8 15:46:11 2007 +0800 + + Temp work around ttm allocation for xvmc, which should be fixed later. + +commit 9e770bf69edaa8944048049e11266dbe1ef145e5 +Author: Eric Anholt +Date: Thu Oct 4 14:31:37 2007 -0700 + + Replace setting of LIFETIME_FIXED on cursors with just updating the offsets. + +commit c9d6e90c2523096c45d330552f471e6bf1752704 +Author: Eric Anholt +Date: Thu Oct 4 14:27:07 2007 -0700 + + Don't set overlay registers LIFETIME_FIXED. It always uses the current offset. + +commit 1cc6bec4628a4ca04a68919a84148a1e6312072f +Author: Eric Anholt +Date: Thu Oct 4 14:23:48 2007 -0700 + + Revert setting of exa_965_state as LIFETIME_FIXED. + + The current offset is used every time in render setup. + +commit dfa22df8ce7713b491c4766ce6ce652db91b5f90 +Author: Eric Anholt +Date: Fri Oct 5 12:53:07 2007 -0700 + + Don't leak buffer object allocations in i830_reset_allocations(). + +commit 7db9d706a1bc9da7afc4823cee92b23e96ae55b8 +Author: Eric Anholt +Date: Fri Oct 5 12:40:48 2007 -0700 + + Warning cleanup. + +commit bf33c4e2d91172efd08690fadda7b3743dd3de62 +Author: Eric Anholt +Date: Fri Oct 5 12:40:37 2007 -0700 + + Fix formatting of error message. + +commit 04e936935f0b0045600241424f1d04a6721a2432 +Author: Eric Anholt +Date: Mon Oct 1 17:29:35 2007 -0700 + + Bring the CH7017 driver closer to spec. + + This is also closer to what my hardware is programmed with, except for some + very confusing off-by-one bugs in an unexpected direction. + +commit 263d48ad93a0fb7100729d0c6e0443797c20c80a +Author: Eric Anholt +Date: Mon Oct 1 16:23:30 2007 -0700 + + Fix probing of the sample CH7017 device I found by allowing GPIO overrides. + + It may be that the LVDS chips need to be DVOA and GPIOB only on mobility + devices with them, and DVOC/GPIOE on non-mobility like this 845. But until + more examples are found, just make this one device probe. + +commit 219354af212c7b68c20df689692c55331e36a705 +Author: Eric Anholt +Date: Mon Oct 1 16:09:13 2007 -0700 + + Restore building of pciaccess-based tools even if the server doesn't use it. + +commit 1b83e5e589105d05c1b78032fa47eecee478cb99 +Author: Eric Anholt +Date: Mon Oct 1 14:32:28 2007 -0700 + + Remove more DVO probing noise. + +commit 29d3188ee9676f697f6fcb859c7f680f5df30318 +Author: Eric Anholt +Date: Mon Oct 1 13:45:09 2007 -0700 + + Suppress I2C failure error messages during DVO device detection. + + Otherwise, errors would be printed for every chip probed which wasn't present + on the system. + +commit 6dd8228a386334d05836353672aae9f8c456e435 +Author: Eric Anholt +Date: Mon Oct 1 12:07:22 2007 -0700 + + Enable CH7017/7018 DVO driver by default. + + On hardware containing one of these chips (generally single pipe with an LVDS + connected), it's probably better to try to enable it and fail in some cases + than to not probe the output at all. + +commit 994ee6721d9f1650ad37e21198b86848352b73af +Author: Eric Anholt +Date: Mon Oct 1 12:01:16 2007 -0700 + + Disable TV/VGA output on the CH7017/7018 devices. + + We don't support those outputs on this chip yet, so turn them off if the BIOS + had set them on. + +commit 0e5574e842eeaac75271ccd50027d3e54c57722d +Author: Regis Prevot +Date: Sat Sep 29 16:21:08 2007 +0200 + + Ignore detection of TV output on Panasonic CF-Y7 + +commit 84d7b2b955107264b67526a04028a8b79d8804e3 +Author: Zhenyu Wang +Date: Sat Sep 29 19:41:15 2007 +0800 + + rename xvmc init function names + +commit 1845e7c6e9caf7a9ad7f46a8fbfa321ddec69a1e +Author: Jesse Barnes +Date: Fri Sep 28 10:12:11 2007 -0700 + + Go back to using old drm_i915_flip_t field name + + This field shouldn't have been renamed in the first place. Go back to using + the old name so that the tree is backward and forward compatible again. + +commit f3d92ab474de11babe507b0e3c15aca146b6cb66 +Author: Kyle McMartin +Date: Fri Sep 28 10:17:55 2007 -0400 + + Dell XPS 1330 has no TV out + +commit bbf69c7446aa9748dacecccfe0b63d803f865b00 +Author: Zhenyu Wang +Date: Thu Sep 27 17:37:19 2007 +0800 + + Pin cursor, overlay(no physical) and exa state buffers + + And cursor mem counting for dri mem manager is not relate + to overlay. + +commit 64188246bb25e95a916ebb8a50a09298e56d91d9 +Author: Zhenyu Wang +Date: Wed Sep 26 15:48:19 2007 +0800 + + clean up old i915 xvmc function declare + +commit 320b7f08f457455f1d16b4c36d149bdc3f6ceead +Author: Zhenyu Wang +Date: Wed Sep 26 15:02:33 2007 +0800 + + Revert to origin xvmc setup steps + + We have to grab xvadaptor's PutImage earlier than + xv init, otherwise no chance to do that.. + +commit 1e0ff38f44e3b5a8b4a5d509c7faa266270d522c +Author: Hong Liu +Date: Thu Sep 20 11:28:52 2007 +0800 + + Fix pixmap offset + + Use consistent interface for counting pixmap offset. + +commit 85e4bd109464a4d90856e17bc960872eeaebc2ad +Author: Zhenyu Wang +Date: Wed Sep 26 14:32:46 2007 +0800 + + Log xvmc driver name + +commit e58b76a24a29e0a502650807de81e650e5dc184d +Author: Zhenyu Wang +Date: Wed Sep 26 14:40:04 2007 +0800 + + clean up err report + + Still need to clean up return value for XvMC API + +commit b10a9668dc50d10489b2ae531d89c8ab7c408170 +Author: Zhenyu Wang +Date: Wed Sep 26 14:01:57 2007 +0800 + + fix i915 xvmc devPrivate reference + +commit f12eaaf385e7a0b85524588a5d865d1cc3f1a0cf +Author: Zhenyu Wang +Date: Wed Sep 26 13:49:55 2007 +0800 + + comment out i965_xvmc_driver for now + +commit 513e8a2f8abde1b11b8058e94a650796fd51779b +Author: Zhenyu Wang +Date: Wed Sep 26 13:45:42 2007 +0800 + + Create xvmc driver interface + + convert i915 to new xvmc driver interface + +commit ca67fa767dc762dac369e84b27a7ef15673d527c +Author: Eric Anholt +Date: Mon Sep 24 11:12:22 2007 -0700 + + Remove logic for supporting i915tex_dri.so vs. i915_dri.so. + + There can be only one. + +commit 130f79613bfe6a8cfa7f431c8cce06cbb93cc91a +Merge: b73235f 1260316 +Author: Eric Anholt +Date: Fri Sep 21 17:14:44 2007 -0700 + + Merge branch 'buffer-objects' + + This branch changes i830_memory.c's allocator to use TTM when available to + allocate memory, which also allows TTM to control almost the entire aperture. + As a result, our front/back/depth buffers are created as real buffer objects, + which may be used by the DRI driver instead of the fake buffer type in TTM. + The updated DRM with bo_set_pin ioctl is required, to allow us to pin and + unpin our buffers as needed. + +commit 126031655c3c1db9881ad17d712461533eb59632 +Merge: c343835 bda3c69 +Author: Eric Anholt +Date: Thu Sep 20 08:57:58 2007 -0700 + + Merge remote branch 'origin/master' into buffer-objects + + Conflicts: + + src/i830.h + src/i830_driver.c + +commit b73235f40497cfb10792ba191d4f6eac3a5df009 +Author: Hong Liu +Date: Thu Sep 20 11:28:52 2007 +0800 + + Fix pixmap offset + + Use consistent interface for counting pixmap offset. + +commit 798448e4641acf241b7cbae0d6c243ae383da9f4 +Author: Zhenyu Wang +Date: Wed Sep 19 13:29:31 2007 +0800 + + Add media state definition on i965 + + This adds VFE state and interface descriptor struct define. + +commit 36b81ba20d20e7b235cb701c5135cbf3f3eedb12 +Merge: 02ad9ce bda3c69 +Author: Zhenyu Wang +Date: Wed Sep 19 11:44:41 2007 +0800 + + Merge branch 'master' into xvmc-i915 + + Conflicts: + + src/i830.h + src/i830_memory.c + +commit bda3c69a7a044869ea63514b97f8aa9260d6b5a7 +Author: Dmitry Babrovich +Date: Tue Sep 18 09:34:34 2007 -0700 + + Bug #12457: Let the ch7xxx driver probe the 7301 + + Looking at the 7304, this chipset likely requires slightly different + programming. However, this change allows for at least some functionality. + +commit 445a59d262b93bd9d2c16cee9934ce77a103776b +Author: Jesse Barnes +Date: Wed Sep 12 09:32:41 2007 -0700 + + Remove unused plane->pipe mappings from SAREA private + + Turns out we can get away without this, so remove it, fix a crash, and only + swap planes/pipes if the DRM can support it. + +commit d02336290bea30de3c390b8121046c38fd6b0f62 +Author: Jesse Barnes +Date: Tue Sep 11 04:28:14 2007 -0700 + + Fix plane/pipe mapping compat code + + Move plane->pipe mapping adjustment to ScreenInit so we can check + against the DRM driver version accurately. + +commit d9f2b3c0d2d08a4b7fad865dab7deb6224b57999 +Author: Jesse Barnes +Date: Mon Sep 10 23:49:34 2007 -0700 + + Fix crash in ScreenInit + + Use pScreen directly when getting at the SAREA private, since + pScrn->pScreen may not be initialized yet. + +commit 4c7542ef43a5267e470ca1608a2ae57abf9783ec +Author: Jesse Barnes +Date: Mon Sep 10 23:30:50 2007 -0700 + + Only swap planes and pipes if DRM supports it + + We want to associate plane A with pipe B on pre-965 mobile chips, since that's + the only way to get framebuffer compression on the builtin LVDS on those + platforms. However, if we do this swapping and DRM isn't aware of it, we may + end up requesting vblank events for the wrong pipe, or setting up SAREA buffer + swap state incorrectly. + + This mod checks whether DRM supports the new plane->pipe swapping behavior, and + only enables the swapping if so. This should fix the bugs Lukas found and + debugged. Reviewed by Michel Danzer. + +commit 286f5df0b62f571cbb4dbf120679d3af029b8775 +Author: Keith Packard +Date: Thu Sep 6 14:31:55 2007 -0700 + + Switch to pci_device_map_range/pci_device_unmap_range APIs. + + With the libpciaccess change that added these new APIs, use them + for all mapping. + +commit 2a8592f2ebcba86b1127aa889155d58a3dc186ca +Author: Zhenyu Wang +Date: Wed Sep 5 14:52:56 2007 +0800 + + Fix G33 GTT stolen mem range + + G33 GTT table lives in seperate stolen mem with + graphics data stolen mem. + +commit 7fd9a98178cdebda4213796fdc452a8a265a1197 +Author: Keith Packard +Date: Tue Aug 28 16:00:01 2007 -0700 + + Don't set supported TV formats until after RandR initialized. + + The TV format property cannot be configured until RandR has been + initialized. + +commit c6e637cd683dc60567b3b4f69b7f2b4c338c89ea +Author: Keith Packard +Date: Tue Aug 28 12:17:15 2007 -0700 + + Limit TV formats to those supported by current connection + +commit ddd6053987b9ca9bd3722ddbdfd412a3d8d252cf +Author: Keith Packard +Date: Tue Aug 28 12:30:46 2007 -0700 + + Add register defines for hw binning + +commit 3fbbd0afde49c53a5a8661f75c8c8c4be3020c30 +Author: Michel Dänzer +Date: Tue Aug 28 17:48:20 2007 +0200 + + Fix build against pre-pci-rework xserver. + +commit 0fdbf64b34e4114c2b89d696b268b9c7464f1efd +Author: Zhenyu Wang +Date: Tue Aug 28 21:56:21 2007 +0800 + + Fix i915 a8 color buffer blending + + From spec, i915 engine uses green channel when reading from 8bit + color buffer for blending, and also writes back green channel. + Fix blend factor in dest alpha case by using dest color instead. + Now rendercheck can pass a8 tests. + +commit 3411eb0dbae470b910af3116a4ab960c821b9b20 +Author: Keith Packard +Date: Sun Aug 26 23:09:01 2007 -0700 + + i830_driver.c changes for libpciaccess. + + Change to use libpciaccess APIs, including computing and using BAR indices + for various mapping activities. + +commit 387fed6daa7426e4a85d30ba7cf608b5f41d24bb +Author: Keith Packard +Date: Sun Aug 26 23:06:57 2007 -0700 + + i810_driver.c changes for libpciaccess. + + This includes new probe code (intel_pci_probe) and changes for i810 to + use BAR indices to refer to suitable portions of the device mappings. + +commit 2c794192052ca55c3263e27e13d16aafe8caa92c +Author: Keith Packard +Date: Sun Aug 26 22:46:19 2007 -0700 + + Mechanical API conversions for libpciaccess. + + Uncomplicated API transistions for libpciaccess usage: + + Legacy xf86 API libpciaccess API + --------------- ---------------- + xf86ReadPciBIOS pci_device_read_rom + pciReadWord pci_device_cfg_read_u16 + pciWriteByte pci_device_cfg_write_u8 + + And, more use of the API-independent DEVICE_ID/SUBVENDOR_ID/SUBSYS_ID macros + to pull PCI identification data from the underlying structure. + +commit 70e8e5957200401474967a467663ae049e9080f2 +Author: Keith Packard +Date: Sun Aug 26 22:40:25 2007 -0700 + + Change DRI interface to fill in PCI data from new libpciaccess structure. + + The DRI interface requires bus identification for each DRI object; pull that + data from the libpciaccess structures as necessary. + +commit 5516cc781bd488c936af225123812a61ed5874b8 +Author: Keith Packard +Date: Sun Aug 26 22:37:38 2007 -0700 + + Add libpciaccess declarations to I810Rec and I830Rec. + + Using libpciaccess requires a different type for PciInfo (struct pci_device + instead of pciVideoPtr) and it requires knowing which BAR each memory region + needs to be mapped from. Add these definitions to the driver private record + along with the includes necessary to use libpciaccess. + +commit daada59b5f8c2294b524a4b5920dc6b1c213642f +Author: Keith Packard +Date: Sun Aug 26 22:32:39 2007 -0700 + + Change IS_Ixxx tests to work with or without libpciaccess. + + libpciaccess has a new structure that holds the PCI identifier data; borrow + macros from the mga driver to work with either the old xf86-specific + structure or the new libpciaccess structure. + +commit 3d3bf493a3973f4067433d27a4d7ddfecaa18f1c +Author: Keith Packard +Date: Sun Aug 26 22:27:34 2007 -0700 + + Intel driver configuration (only) changes for X server libpciaccess usage. + + Detect whether the target X server uses libpciaccess, using it in the driver + compilation as necessary. This change means that utilities that used to use + libpciaccess will not do so unless the driver itself uses libpciaccess. Yes, + that could be fixed, but it doesn't seem that important. + + This patch does not include any code changes necessary to actually have the + driver build against an X server using libpciaccess. + +commit 5faf9cc6afe1c30fa88bc6446088a6fa47fc5d0b +Author: Keith Packard +Date: Sun Aug 26 09:34:06 2007 -0700 + + Sort quirk table, add Dell Latitude X1 + +commit a9e1d42a47cef79d8bbde2afd89d26aed964e344 +Author: Keith Packard +Date: Sat Aug 25 12:54:11 2007 -0700 + + Lenovo 201a is x60s, not x61s + +commit ffc2907f7f2eb039004eff0014c5563a01463fb0 +Author: Keith Packard +Date: Sat Aug 25 12:31:21 2007 -0700 + + Thinkpad X61s has no TV out + +commit 0c20fbabd18c19b2753cb60280f89e240ce5645f +Author: Keith Packard +Date: Fri Aug 17 22:21:47 2007 -0700 + + Make sure XV_PIPE is used whenever possible. + + The code was not consistently using XV_PIPE when the desired crtc contained + any portion of the video output. + +commit e443f83dd6f110156743c93f7d793cdddb8195a1 +Author: Eric Anholt +Date: Fri Aug 17 18:13:49 2007 -0700 + + Tune acceleration architecture allocator sizes down. + +commit bd874b11bbfe582aebd3115771f90807e75afc31 +Author: Eric Anholt +Date: Fri Aug 17 17:49:21 2007 -0700 + + Replace AA allocator usage with i830_memory.c for RandR rotation. + + This requires EXA 2.2 (server 1.3) for rotated performance with EXA, because + the i830_memory.c allocation may not fall within what EXA considers the + offscreen area, so the PixmapIsOffscreen hook is needed. + +commit 9ad33dd65a79277ef75a6e95373614852725f5a9 +Author: Eric Anholt +Date: Fri Aug 17 16:46:48 2007 -0700 + + Use i830_memory.c instead of the AA's allocator for XV buffers. + + This should fix issues with XV being allocated into XAA's tiled pixmap + cache and resulting bad rendering. Its also brings us closer to being able + to shrink the size of the pixmap cache on XAA, which is of limited utility. + +commit 3655a1ecb62f6c387a16fa87cf6f00bf7835dce4 +Merge: e5c336e 2231cdc +Author: Jesse Barnes +Date: Thu Aug 16 12:04:20 2007 -0700 + + Merge branch 'master' of ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit e5c336eaa32be8f9379a2c1dd51006b85bc8b270 +Author: Jesse Barnes +Date: Thu Aug 16 12:04:02 2007 -0700 + + Disambiguate plane and pipe mapping, use plane A on pipe B on pre-965 LVDS + + Add a new 'plane' field to the intel_crtc private structure for tracking + planes separate from pipes. This allows pre-965 chips to use plane A + on pipe B, enabling framebuffer compression for builtin LVDS displays. + +commit c3438356d6b7b63ad9d0086efb084be8e048980e +Author: Eric Anholt +Date: Thu Aug 16 11:34:02 2007 -0700 + + Add tiling information to BO layout description. + +commit 0c9e4aeea84e20a18e3b76d8cf8e802af004df57 +Merge: 79d9a30 2231cdc +Author: Eric Anholt +Date: Thu Aug 16 11:30:16 2007 -0700 + + Merge branch 'master' into buffer-objects + + Conflicts: + + src/i830_dri.c + src/i830_memory.c + +commit 2231cdcd8f1ee81b3e59cc5e3a325c22ee0f40e4 +Author: Dave Airlie +Date: Thu Aug 16 17:15:54 2007 +1000 + + i915: add support for render to a8 + +commit a69db6f7fe1703b473e5c1d1e0088ccc203f4d5a +Author: Dave Airlie +Date: Wed Aug 15 18:28:50 2007 +1000 + + intel: don't setup texOffsetStart unless using EXA + +commit 5126a71f82767b9e23cd590453718f3364789740 +Author: Zhenyu Wang +Date: Tue Aug 14 13:54:55 2007 +0800 + + Fix seg fault introduced in tiling patch when TV detect + + When TV does load detect, fb hasn't been setup, so we should check + that in i830_display_tiled(). Caught by Nanhai. + +commit d9f89a1af7e7ff4056727060cdf2e35c15a4dcdd +Author: Keith Packard +Date: Fri Aug 10 17:59:33 2007 -0700 + + Save/restore tile-mode offset registers DSPATILEOFF and DSPBTILEOFF + + Now that the driver sets these registers, they must be saved and restored. + +commit 5bc194d3d3c87bb0128d9ac10f090f031345eb37 +Author: Keith Packard +Date: Fri Aug 10 17:54:32 2007 -0700 + + Set DSPATILEOFF/DSPBTILEOFF to handle 965 tiled frame buffers. + + DSPATILEOFF and DSPBTILEOFF replace DSPASURF and DSPBSURF when the frame + buffer is in tiled mode. + +commit 64b943c79cf957a4c54482720195d7f27b7f0c0d +Author: Eric Anholt +Date: Fri Aug 10 15:48:05 2007 -0700 + + Add #if 0-ed fence debugging code. It's noisy, and of little use to most. + +commit ba9a503ba2099025e393f3382bb453985ef23497 +Author: Eric Anholt +Date: Fri Aug 10 15:06:58 2007 -0700 + + Don't force tiling on if it is disabled in configuration but fbc is possible. + +commit b7751c7d1d6bcf310824295c3bab4ff36760c791 +Author: Eric Anholt +Date: Fri Aug 10 17:42:09 2007 -0700 + + Fix stack-smashing in the last commit. + +commit cb36635a053d4ac3971fea05060d31dbd3d382d2 +Author: Eric Anholt +Date: Fri Aug 10 14:16:59 2007 -0700 + + Attempt to fix several front buffer tiling failure cases. + + Front buffer tiling is now disabled with G965 and XAA. Some of the acceleration + that i830_xaa.c does can't be supported on tiled buffers. + + Adds a tiling field to struct i830_memory, and uses it instead of separate + variables for each potential tiled buffer. + +commit ed1b106fabf3a18489bdb3083326f27387a9cb72 +Author: Keith Packard +Date: Fri Aug 10 14:31:16 2007 -0700 + + Clean up tv mode name allocation and copy. + + TV mode names used to contain the signalling standard along with the pixel + size. The signalling has been moved to the TV_FORMAT property, but the + allocation and initialization of the mode name was left a bit messy as a + result. + +commit f71b9358b4157a8cfdc694ddef8ca3f98926ca91 +Author: Jesse Barnes +Date: Fri Aug 10 15:53:04 2007 -0400 + + Cleanup tiling and FBC driver output. + + Remove an extra "FBC enabled" message from i830_memory.c (only report errors + if they occur), and don't print the "forcing FBC on" message if tiling was + already enabled, as it's redundant and confusing. + +commit e6746d0f286ef9d9a87f748d40e5421c268f2f7d +Author: Jesse Barnes +Date: Fri Aug 10 15:48:15 2007 -0400 + + Enable tiling by default on 965. + +commit e0fcf645a228094620b8f7fdd580963611bdd6ef +Author: Jesse Barnes +Date: Fri Aug 10 15:43:06 2007 -0400 + + Tiling fixes for 965 + + This should be close to the last set of tiling fixes for 965 chipsets. + Prior to this commit, the 965 composite hook didn't take tiling into + account, nor did 965 textured video, which caused display corruption. + However, there seems to be at least one last bug to squash--on occasion, + a configuration with tiling enabled won't properly display text. This + is likely another tiling related problem with the composite hook. + +commit 02ad9cee330fb5fb0008ad6f74e74e8d8a1fc36e +Merge: 105f8a1 7b143e5 +Author: Zhenyu Wang +Date: Fri Aug 10 16:45:56 2007 +0800 + + Merge branch 'master' into xvmc-i915 + +commit 105f8a183eb64623d9a9e2833dbe27156a551f69 +Author: Zhenyu Wang +Date: Fri Aug 10 16:44:46 2007 +0800 + + disable subpicture initial + + until we really implement it, OSD can't work for now. + +commit 7b143e5c8397da077c0e02455c21c5a99cf50942 +Author: Dave Airlie +Date: Thu Aug 9 12:14:44 2007 +1000 + + i965: increase composite vertex buffer size and alignment to be safe + +commit 14691b24da5aa29d8c41ac7b7c61828e3cd9eab7 +Author: Dave Airlie +Date: Thu Aug 9 09:41:32 2007 +1000 + + i965: fix memcpy of the sf_kernel when a mask is needed + +commit 5e18c6af9051da654d2a6a97553ef4fe777bb61e +Author: Carl Worth +Date: Wed Aug 8 11:13:37 2007 -0700 + + Allow 965 composite acceleration to A8 destinations. + + Note that this is a slowdown in text rendering due to the high overhead of our + compositing setup, but appears to be correct according to rendercheck. + +commit b0ec670cdb0b6ca6fc0f4f165fa3ee5a20d7c985 +Author: Eric Anholt +Date: Wed Aug 8 11:03:51 2007 -0700 + + Bug #11593: Remove dead struct vch_bdb_20 which was angering the sun compiler. + +commit 87cc72ef509b85635bf0e84c47dfed6b7242170b +Author: Zhenyu Wang +Date: Wed Aug 8 09:39:55 2007 +0800 + + check early if we have slot left for new context or surface + +commit fec6744b763f2b85b4e592c51326b9ee979bef5d +Author: Zhenyu Wang +Date: Wed Aug 8 09:26:10 2007 +0800 + + I missed to remove port attributes wrapper + +commit 76c084d41999f13497b80d4ac6799cb974adaa03 +Author: Zhenyu Wang +Date: Wed Aug 8 09:22:42 2007 +0800 + + explicit say "unsigned int" + +commit cfc614b1f9143ed1407733aaa81c4a980c613a63 +Author: Zhenyu Wang +Date: Wed Aug 8 09:06:47 2007 +0800 + + remove xvmc attributes + + We don't have extra attributes than Xv port. + +commit 92af2f4bbcb395cbde097776718449d99843ad67 +Merge: da82a47 e0be352 +Author: Eric Anholt +Date: Tue Aug 7 15:18:17 2007 -0700 + + Merge branch 'origin' + + Conflicts: + + src/i830_exa.c + +commit da82a47a558597f3653e2b33bc6adbab18574b57 +Author: Eric Anholt +Date: Mon Aug 6 17:01:37 2007 -0700 + + Fix EXA rendering with tiled front buffer on pre-965. + + The 915 and earlier appear to respect the fence registers, while only the 965 + requires the per-operation tiling setting and pitch shifting. This will also + fix issues with rendering on the 965 involving multiple cliprects, where the + pitch would get divided repeatedly. + + This removes the offset < 4096 fallback, which essentially resulted in no + acceleration to tiled buffers, hiding the issues. + +commit e0be352f5017f0e645a4ff8a40961d9c2b98863a +Author: Jesse Barnes +Date: Tue Aug 7 12:37:25 2007 -0700 + + Fixup pitch in Prepare* functions, since actual hooks may + be called many times for the same pixmap, and we don't want + to keep dividing the pitch by 4. + +commit b29a932bec2a3cc5a38e9c09c012cfdc1b6209c1 +Author: Zhenyu Wang +Date: Tue Aug 7 16:47:13 2007 +0800 + + code cleanups + + and put wrap function in driver xvmc priv instead of per xv port priv + +commit 7431abee5fb971d1f8bc7ac4bea137f6ece9418b +Author: Brice Goglin +Date: Tue Aug 7 09:13:00 2007 +0200 + + Define INTEL_VERSION_MAJOR/MINOR/PATCH using PACKAGE_VERSION_* + +commit 9e1914270a0978ec4dfae757d3dd57ca7ffe17e5 +Author: Jesse Barnes +Date: Mon Aug 6 17:55:00 2007 -0700 + + Remove 4k offset checks from Copy & Solid hooks. + Reading the docs too literally can cause you to hide bugs with false fixes... + +commit 3510d5728fa972b36d022b4f9189d46ff98d7b16 +Author: Eric Anholt +Date: Mon Aug 6 16:44:39 2007 -0700 + + Fix accumulated whitespace nits in i830_exa.c + +commit 5ff05dffe229e35da7619762628fdd0f125585e8 +Author: Jesse Barnes +Date: Mon Aug 6 16:01:10 2007 -0700 + + More tiled rendering fixes: - check for tiling, not just offset in PrepareSolid - combine pI830->tiling and frontbuffer checks into new exaPixmapTiled function for readability + +commit ba90d944329dd8c79a757c38128964fbbe4ab898 +Author: Eric Anholt +Date: Fri Aug 3 16:46:09 2007 -0700 + + Add the file mode for bios_dumper output so it doesn't have 000 permissions. + +commit 322a163cfbda885adc6bb09c1f976d36617ea83b +Author: Eric Anholt +Date: Fri Aug 3 10:46:39 2007 -0700 + + Quirk away the nonexistent TV connector on the Panasonic CF-Y4. + +commit ffbab2ee5dc227b2a8a5ffd1717ae00e8e37f956 +Author: Jesse Barnes +Date: Fri Aug 3 21:27:52 2007 -0700 + + Limit Solid & Copy offsets to 4k when rendering to tiled targets + +commit 019dbfda294aaafb28d8bea0fe2f5dadc2ea3e0b +Merge: 3d3c0e8 15f71ed +Author: Jesse Barnes +Date: Fri Aug 3 20:45:14 2007 -0700 + + Merge branch 'master' of ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 3d3c0e8c55f639a501c0756948b518abd903d7d0 +Author: Jesse Barnes +Date: Fri Aug 3 20:40:45 2007 -0700 + + Tiled rendering & fbc fixes: + - actually enable tiling in DSP(A|B)CNTR if needed + - add logic to EXA routines for tiled case (still needs work) + - enable/disable fbc on DPMS events (meant moving functions higher in file) + - fix fence register pitch programming (use correct pitch instead of kludged value) + +commit 79d9a309b19e22561e000a47b732c67479c2e6d4 +Author: Eric Anholt +Date: Thu Aug 2 15:50:42 2007 -0700 + + Mark DRI buffers as shareable, and pass their buffer handles through the SAREA. + +commit 0da4f2b0cd7203377ad10407928a367b8c6d310e +Author: Jesse Barnes +Date: Tue Jul 31 16:22:36 2007 -0700 + + Legacy backlight changes: + - add support for 965GM + - make sure legacy enabled systems don't reduce the range of backlight values we can present to the user + +commit 15f71edba37738f8ba279fa07452fda10cc65298 +Author: Zhenyu Wang +Date: Sat Jul 28 17:43:29 2007 +0800 + + Update Lenovo TV quirk info + +commit 857b4a7bcb69ca43b866b4283fe075abbafb1d22 +Author: Eric Anholt +Date: Fri Jul 27 18:03:12 2007 -0700 + + Pin some buffer objects at creation time, which can't be moved yet. + + A number of other interfaces of ours don't allow buffer offsets to be updated + after screeninit. This attempts to catalog why for each one, so that they + can be fixed one by one. + + This happens to restore the EXA offscreen allocator for now, as a fixed-offset + object. + +commit d7b5b595ad29ae0ac3adbd3a176be3fe7ffa6474 +Author: Eric Anholt +Date: Fri Jul 27 12:48:08 2007 -0700 + + Delay the first screen pixmap update to CreateScreenResources. + + The return value of GetScreenPixmap before CreateScreenResources is not, in + fact, a pixmap. + +commit 2b1ec0f51479c1d7e5e62803c68feca29375519d +Author: Eric Anholt +Date: Fri Jul 27 10:00:35 2007 -0700 + + Use the dontMapFramebuffer option available with DRIINFO 5.4. + + If not available, AIGLX init will fail. While here, simplify DRIINFO tests + since we refuse to init with a version queried less than the version we + compiled against, anyway. + +commit f403a50afbcef1e54f554481c72037338bd5357c +Author: Wang Zhenyu +Date: Fri Jul 27 09:24:24 2007 +0800 + + Add another Lenovo TV output quirk + + From issue report http://lists.freedesktop.org/archives/xorg/2007-July/026644.html + +commit 34c82ad7ce83394db47588693b578cf91991bf1c +Author: Wang Zhenyu +Date: Fri Jul 27 09:14:13 2007 +0800 + + Add quirk support + + This one trys to use a flag for possible quirks. It adds a quirk + for my Lenovo T61 TV output, and ports some origin LVDS quirks to it. + +commit 1a585d03972394cb97dec2462937b0104bdf4de2 +Author: Eric Anholt +Date: Thu Jul 26 10:46:35 2007 -0700 + + Use new drmBOSetPin interface instead of NO_EVICT/NO_MOVE buffers. + + To do this, we have to deal with buffer offsets being set at EnterVT time + instead of screen init time. We've wanted to move this direction for a long + time, but there are repercussions. The EXA offscreen memory manager has to + be disabled, because it can't be moved. That will be replaced by BO-backed + pixmaps soon. Also unresolved is whether our moving + front/back/depth/texture buffers will break the classic-mode DRI driver. + + This code doesn't actually work yet. + +commit 0fd3ba0518b3cde9ca0e4e2fc1854c00d8a43d5c +Author: Brice Goglin +Date: Wed Jul 25 20:11:32 2007 +0200 + + Fix typo in intel.man + + Reported by A. Costa" in + http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=432061 + +commit 18c707a8c13ac5fffdd30d55e6f5926a68b367df +Author: Eric Anholt +Date: Wed Jul 25 10:11:16 2007 -0700 + + When TTM is available, use it instead of manual AGP allocations when possible. + + This is a step towards being able to expose buffer objects through the screen + private to DRI clients, instead of having them have to use the fake buffer + object type. + + This fails in two ways. First, the kernel memory manager is not currently + suitable for doing the physical allocations we need, so we still use AGP for + those. Additionally, the DRI lock can't be initialized early enough for us, so + these buffer object allocations fail. This will be fixed by improving the + DRM interface. + +commit c4deefa80a6349db968e25bd6778cdf7a514ca7f +Author: Xiang, Haihao +Date: Mon Jul 23 10:35:32 2007 +0800 + + only enable xvmc for 915/945/G33 + +commit 45962eed51120ff77326c29d72cf8b6cd8a934b5 +Author: Zhenyu Wang +Date: Mon Jul 23 09:50:17 2007 +0800 + + Fix a typo in i915 render + + Fence setting is in mapstate actually. This fixes rotation in + tiled fb case, thanks Keith to report this. + +commit a52c53b8603495ab05e07e3da5092fe122fcb6f2 +Author: Xiang, Haihao +Date: Fri Jul 20 17:10:27 2007 +0800 + + don't initialize XvMC if xv is disabled. + +commit b1af2c0e01c54ef1d40fd0ca1ede29a1dd7ed97b +Author: Zhenyu Wang +Date: Fri Jul 20 15:18:48 2007 +0800 + + Fix device id info for 945GME, 965GME + + which do have new host bridge ids + +commit 6b4d43dbf4bbb86d479d8fca480c8bec39e2714b +Author: Xiang, Haihao +Date: Fri Jul 20 09:59:40 2007 +0800 + + lock display when creating context + +commit 42e91c7092f9cf7f5c0b98e9ae3d92a5b30821bf +Author: Xiang, Haihao +Date: Thu Jul 19 17:30:54 2007 +0800 + + move i830_allocate_xvmc_buffer out of #if/#endif + +commit 36ea26f2779d951fa173da785aca100564e5ecf8 +Author: Xiang, Haihao +Date: Thu Jul 19 17:21:05 2007 +0800 + + add copyright + +commit 9d03873423c0968b2d6700b7d8d44c7e23b8d7f3 +Author: Xiang, Haihao +Date: Thu Jul 19 10:03:19 2007 +0800 + + block some signals within critical section to avoid + + dead lock. + +commit 25658f838bd1bcd7559d7a032d127c626833fb7c +Author: Xiang, Haihao +Date: Mon Jul 16 13:03:58 2007 +0800 + + 1. The pitches for y/u/v surfaces are 1024bytes aligned. + + 2. clean code + +commit 8f316a4584d0676e5dae051698bde0831f018cc4 +Author: root +Date: Thu Jul 12 16:24:03 2007 +0800 + + 1. clean code + + 2. fix an error in map_state + +commit 4844254431695158287167e3b0fad25d9efb7a6c +Author: root +Date: Tue Jun 26 16:32:30 2007 +0800 + + a fix for 945G/945GM + +commit 8c249765ce788f8adb0325a8e3016a0eae74b13b +Author: root +Date: Mon Jun 25 14:07:01 2007 +0800 + + 1. using batch buffer + + 2. implement macroblock_ipicture instruction + 3. 16bit INTRA block + +commit 2b20b395541f786e4009211e4c56042257b8d114 +Author: Xiang, Haihao +Date: Mon Jun 25 10:43:49 2007 +0800 + + fix a bug related to display surface + +commit 6e47601ac7427390fa4cb6e228dfb566ff95db09 +Author: Xiang, Haihao +Date: Mon Jun 25 10:40:08 2007 +0800 + + fix some bugs + +commit d038ffdfffb846e22f360faac5d469c8e59795ad +Author: Xiang, Haihao +Date: Mon Jun 25 10:37:12 2007 +0800 + + Release resource allocated for surface/subpicture + +commit a9bf7e28b91692c7c7a4915cdf9603cd2ef025ea +Author: Xiang, Haihao +Date: Mon Jun 25 10:33:35 2007 +0800 + + fix some bugs + +commit ccac60bf035bb54661c13f306031def81e105a32 +Author: Xiang, Haihao +Date: Mon Jun 25 10:23:28 2007 +0800 + + fix some bugs + +commit 934da9f2b83716bb37d0719a61b8e6b179fff2cd +Author: Xiang, Haihao +Date: Mon Jun 25 10:17:08 2007 +0800 + + enable XvMC for i915 + +commit c7920a0e819308762fca3d6fc7ab194bd565b06a +Author: Dave Airlie +Date: Thu Jul 19 15:09:54 2007 +1000 + + strip out remainder of drmmm code in driver + +commit 37652b68880f1881b90bd22218cfe86eca7e5974 +Author: Dave Airlie +Date: Tue Jul 17 14:03:21 2007 +1000 + + intel: oops I commited pixman local workaround - undo it + +commit e40f6a4923d1323702406266e90eae3218a8a44e +Author: Dave Airlie +Date: Tue Jul 17 09:20:07 2007 +1000 + + intel: actually 2.3.1 should be good enough + +commit 1e169be25b2e4ab34afd4b8ae8ae0041f6069125 +Author: Dave Airlie +Date: Tue Jul 17 09:17:31 2007 +1000 + + intel: don't try and use TTM memory manager with old libdrm interface + + I probably need to release a libdrm with this interface in it now.. + +commit ff2be3995d33f9e4b7f63b380f166b6168c9b9c6 +Author: Keith Packard +Date: Fri Jul 13 12:47:18 2007 -0700 + + Remove hard-coded CRT blanking frobbing for load detection. + + CRT blanking needn't be adjusted to perform load detection on 9xx chips, and + the 8xx load detection path now adjusts blanking just during load detection. + Adjusting the blanking interval turned out to cause many monitors to fail to + sync. + +commit 00f4587025a3879626623135b0a153fcdb906719 +Author: Keith Packard +Date: Fri Jul 13 10:58:06 2007 -0700 + + Ensure pipe/output active before doing load detection. + + If the pipe or output have been set to DPMSOff, then load detection will not + work correctly. Also, share the load detection configuration code between + crt and tv outputs. + +commit 6f18300aed1340348c6d395f326061b5315be643 +Author: Keith Packard +Date: Mon Jul 9 21:29:55 2007 -0700 + + Eliminate bogus (and harmful) blanking adjustment for load detect. + + Instead of always adding blanking to mode lines, use the FORCE_BORDER option + on i9xx hardware where it works, and dynamically add a bit of border if + necessary on i8xx hardware to make load detection work. This may cause + flashing when a usable crtc is not otherwise idle when load detection is + requested. + +commit 04130ac6b705aa49161fb6dae83ad0bdd76e89d9 +Author: Wang Zhenyu +Date: Wed Jul 11 11:42:56 2007 +0800 + + Fix i915 rendering for tiled buffer + + Make it to check fence register for dest buffer. + +commit 88f8b688e2316ae4a1f7485f0010ce90de54783a +Author: Eric Anholt +Date: Mon Jul 9 12:56:13 2007 -0700 + + Fix some physical address handling for >4GB addresses. + + The upper bits would have been inappropriately dropped on G33-class hardware, + and on G965-class hardware in a 32-bit environment. The only use of physical + addresses on these should be for FBC, though, and FBC requires addresses + below 4GB. This is unresolved. + +commit bf831117b4659cc4f2774098dee938505f780a9b +Author: Jesse Barnes +Date: Sat Jul 7 10:15:32 2007 -0700 + + FBC fixes: + - allow FBC and Tiling to be forced off if configured to do so + - only touch FBC registers if pI830->fb_compression is true + +commit b426866fe1be2ad3861559beff69186379a6afad +Author: Jesse Barnes +Date: Fri Jul 6 20:48:40 2007 -0700 + + Fix manpage to reflect default behavior. + +commit 377c58373daa6bef5d37ead2b6f9a769a905b6fa +Author: Jesse Barnes +Date: Fri Jul 6 20:39:19 2007 -0700 + + Fix naming of FBC plane enable bits (mistakenly called them pipes earlier). + +commit 9c0388dc8d4c6495fae21af6da644b34e20173d1 +Author: Jesse Barnes +Date: Fri Jul 6 20:38:41 2007 -0700 + + Update man page with current behavior. + +commit cecbc71fdc9af832cef23427696f6f654f7d6104 +Author: Jesse Barnes +Date: Fri Jul 6 16:36:34 2007 -0700 + + Fix debug output in fbc enable/disable routines. Add logic to make sure fbc + isn't enabled twice on two different pipes. + +commit 4359df9419d2d02a2f9d9adc7f5a49ecf07ddd30 +Author: Jesse Barnes +Date: Fri Jul 6 16:17:45 2007 -0700 + + Fix tiling and fb compression defaults for 965 (not yet fully supported). + +commit ca593a5219549df94a6d234ebbcf9e7c44723c9b +Author: Jesse Barnes +Date: Fri Jul 6 16:10:52 2007 -0700 + + FBC and tiling changes + - change framebuffer option name to "FramebufferCompression" + - add new "Tiling" option (controls all tiling, not just front buffer) + - add debug message to fb compression enable/disable routines + - update man page with new options + +commit 8798ef11321ee6957919279076758d47ad956cf3 +Merge: 8919b22 3c552af +Author: Jesse Barnes +Date: Thu Jul 5 12:21:31 2007 -0700 + + Merge branch 'master' into fbc + +commit 8919b2292147add41a1c1c6e5e673257cb6c6c6e +Author: Jesse Barnes +Date: Thu Jul 5 12:21:06 2007 -0700 + + Re-add tiling kludge, but only for 965. + +commit 407b124af8f7bb42abe4eecc87476c4c3e555cd0 +Author: Jesse Barnes +Date: Thu Jul 5 11:31:34 2007 -0700 + + Remove tiling kludge. May need more fixes for 965. + +commit 7a87b9d2a2eb4d281dce67586756ff5653b2805a +Author: Jesse Barnes +Date: Thu Jul 5 11:23:06 2007 -0700 + + Revert discard alpha change, requires other fixes to work. + +commit fecf964534f5ba6d40480cb13adc89094946a51e +Author: Jesse Barnes +Date: Thu Jul 5 10:59:23 2007 -0700 + + FBC fixes: + - properly check several FBC enablement constraints + - don't use alpha discard if FBC is in use + +commit 60ee7b6a91b2b8c447130c60cd8b19eb68119777 +Author: Jesse Barnes +Date: Tue Jul 3 14:20:34 2007 -0700 + + Fixup line length buffer padding, add kludge for front buffer tile + pitch. + +commit 3c552af65d28fafec1d09484a8914b690b961349 +Author: Eric Anholt +Date: Mon Jul 2 18:33:47 2007 -0700 + + Update documentation and bump driver version to 2.1.0. + +commit f02036aedcd7866c567a6adc070eda3dad872105 +Author: Jesse Barnes +Date: Mon Jul 2 15:42:02 2007 -0700 + + Framebuffer compression changes: + - move FBC register definitions to i830_reg.h + - add fix from Arjan for 965 depth buffer tiling + - add VT switch and clear-at-server-start code for FBC registers + +commit 2b9961eb9ce8734565ecdb01cb11610714d7f610 +Author: Eric Anholt +Date: Mon Jul 2 15:16:33 2007 -0700 + + Fix reversed LVDS dither enabling logic on GM965. + +commit 3d9ee8b2991ec0da8cc21b8455ff7f00fd0335b5 +Author: Eric Anholt +Date: Mon Jul 2 14:38:28 2007 -0700 + + Bug #11365: Disable the panel fitter unless it's needed for the chosen mode. + + The automatic panel scaling appears to choose bad sampling on some GM965 + hardware for 1:1 mapping modes, and there's no real sense in having it on + if we just want 1:1. + +commit b384c608978dcd3d2ea6c0018179673cb4735f4c +Author: Jesse Barnes +Date: Mon Jul 2 09:32:28 2007 -0700 + + Enable framebuffer compression (use Option "FrameBufferCompression" + "true" in your xorg.conf). Should save ~0.5W during typical 2D usage. + +commit 1e2e301348b4168aeed38b3fdc6b0e43d5678a86 +Author: Keith Packard +Date: Sat Jun 30 12:45:24 2007 -0700 + + Fix load detection to use border region instead of blanking. + + Make sure there is some border area to use by changing how the pipe is + configured, then pick a scanline in the middle of the border for load + detection. This lets the load detect code use an active pipe instead of + requiring an idle one. + +commit 11862c2e1f23b77b56d7bd8b384579b5e3ae377b +Author: Alan Coopersmith +Date: Thu Jun 28 23:31:28 2007 -0700 + + Add *~ to .gitignore to skip emacs & patch backup files + +commit 6503eb45023d0db9a94cb9d1e14a26af07a6628d +Author: Alan Coopersmith +Date: Thu Jun 28 23:30:35 2007 -0700 + + Add AM_PROG_CC_C_O to configure.ac + + Clears automake-1.10 warning: src/bios_reader/Makefile.am:8: compiling + `bios_dumper.c' with per-target flags requires `AM_PROG_CC_C_O' in + `configure.ac' + +commit 5257e36f502676fd6a44bbb8e747d9138ed3bc5c +Author: Keith Packard +Date: Thu Jun 28 15:29:52 2007 -0700 + + Handle dual-channel LVDS on i855. + + Just as with i9xx LVDS, the i855 LVDS can operate in dual-channel mode with + a modified P2 divisor value (7 instead of 14). Just using the existing 9xx + code for 855 appears to work fine. + +commit 16bfcb8042519f24b4494fd621814f39949ceeb6 +Author: Keith Packard +Date: Thu Jun 28 15:27:56 2007 -0700 + + Decode PLL registers in LVDS mode a bit better in debug code. + + LVDS mode changes how the PLL works in fairly dramatic ways; the debug code + wasn't properly accounting for those differences resulting in fairly bogus + debug output. + +commit 9675ccb30818bf831ac4c634751ab4bfe35f7bfe +Author: Wang Zhenyu +Date: Wed Jun 27 09:23:33 2007 +0800 + + EXA: fallback mask transform on i965 + + It needs to fix shader programs which hasn't been done yet. + +commit 7a2300c88ae59f5b7c3ce89d33147e3f0ca23c18 +Author: Wang Zhenyu +Date: Wed Jun 27 09:19:22 2007 +0800 + + EXA: don't have to check offscreen size + + DDX will check it for EXA_OFFSCREEN_PIXMAPS flag + +commit fff4a3b58fa18ee2ad91f998d190e90b77c051ab +Author: Carl Worth +Date: Mon Jun 25 23:15:58 2007 -0700 + + Use local structures for vs_state, sf_state, and wm_state + +commit 0a8a4afd3c59011d6b1f5b39aedfb9bce0e55c48 +Author: Carl Worth +Date: Mon Jun 25 23:12:23 2007 -0700 + + Use local structure for src_sampler_state and mask_sampler_state + +commit 499166a60fcbf16021bd9ec233790ba55803aa44 +Author: Carl Worth +Date: Mon Jun 25 23:09:17 2007 -0700 + + Use local structure for mask_surf_state + +commit a418ef7316808b239884a90c3fe890220bcc0242 +Author: Carl Worth +Date: Mon Jun 25 23:07:19 2007 -0700 + + Use local structure for src_surf_state + +commit 0e3c0b17826b7b5a21ee2c1d789b084fc167f1ed +Author: Carl Worth +Date: Mon Jun 25 23:05:50 2007 -0700 + + Use local structure for dest_surf_state + +commit 41a2c0f15446d59678461648f476fa71d40d44e0 +Author: Carl Worth +Date: Mon Jun 25 23:03:47 2007 -0700 + + Use local structure for cc_state + +commit 59f2150caca7eb374a2db43a472ba85f50d23274 +Author: Carl Worth +Date: Mon Jun 25 11:28:57 2007 -0700 + + Remove redundant i830WaitSync from i965_prepare_composite + + There were two calls to i830WaitSync, and between them no state was + being changed---just offsets were being computed. + +commit 66aa0e61e1e8d2216a9c0555be5be004ed0a3192 +Author: Dave Mueller +Date: Fri Jun 22 16:45:27 2007 -0700 + + Bug #11171: Add support for the Ti TFP410 DVO TMDS transmitter. + +commit f8d7cbc6e1322acad3351591336cefcfba7d9aaf +Author: Eric Anholt +Date: Fri Jun 22 16:29:21 2007 -0700 + + Move the ivch's fixed panel mode support to i830_dvo.c for other LVDS drivers. + + This also results in removal of the setup hook, which was being called + unconditionally and breaking non-ivch dvo drivers. + +commit ec236c76b93aea5f2ee1e8b8509cde4625974fcb +Author: Keith Packard +Date: Fri Jun 22 16:32:46 2007 +0100 + + I830 needs to have plane/pipe/pll started in mode_set. + + The patch for the i855 to stop enabling plane/pipe/pll in mode_set broke the + i830. Revert that just for the i830, leaving it enabled for the i855. + +commit d957c6b8e1dde8e11c1db3431e0ff58c5d984880 +Author: Keith Packard +Date: Fri Jun 22 01:32:02 2007 +0100 + + Increase vblank wait timeout from 20ms to 30ms. 49.6Hz < 20ms. + + The x40 LVDS mode has a 49.6Hz vertical refresh. Waiting for only 20ms can + sometimes cause the driver to start programming the hardware before the + vblank has occurred, which will lock up the i855 chipset. Extend this to + 30ms (the maximum timeout used by the BIOS) to ensure this doesn't happen. + + Detecting actual vblank occurance using the various status registers should + also be possible but isn't yet working. + +commit a67c2965385001bcb8987265f698ff0f5809cd11 +Author: Keith Packard +Date: Thu Jun 21 23:59:38 2007 +0100 + + Follow BIOS configuration for Legacy Backlight Brightness. + + The backlight control in the LVDS controller can either operate in 'normal' + mode or 'legacy' mode. In legacy mode, it uses the PCI config space register + 0xf4 which can range from 0 to 0xff. In normal mode, it reads the range and + current value from the BLC_PWM_CTL register. + +commit d6e46f67ab3af1ad3bfa72acb0efd9fe79dbf1dc +Author: Keith Packard +Date: Thu Jun 21 20:16:36 2007 +0100 + + Eliminate some uninitialized variable warnings + +commit 9d104634cf03bea82d1467f01e577cb8d2e4b554 +Author: Keith Packard +Date: Thu Jun 21 01:15:39 2007 +0100 + + Add 3DSTATE_CLEAR_PARAMETERS bits + +commit 3bbf313ba541526a893915f8b6c64b1eccf325e0 +Author: Wang Zhenyu +Date: Tue Jun 19 09:33:50 2007 +0800 + + Fix left G33 issues + + Be sure to check G33 chip type in: + - sdvo output + - Y-major tile + - crt detect + - and xaa composite + Sorry for that I should have fixed them very earlier... + +commit acef342c870f3b5b781e48c8bf44739aa5ee8ffa +Author: Eric Anholt +Date: Mon Jun 18 11:57:48 2007 -0700 + + Bug #11295: Disable textured video on i915 with framebuffer width too large. + +commit fbbb41bc5e03478cb46ee8f64ef68b23ff3fc14b +Author: Keith Packard +Date: Sun Jun 17 14:59:24 2007 +0100 + + Let DPMS functions enable plane/pipe/output on 8xx hardware. + + On 855, letting crtc_mode_set enable the plane and pipe will occasionally + hang the chip. Instead, wait for crtc_enable to light things up. For 9xx, + leave things alone. + +commit d5ca000ece145a35fd6df0dcf3fb3460bd2d64e3 +Author: Rémi Cardona +Date: Sat Jun 16 13:17:54 2007 +0100 + + Include stdint.h to get uint64_t + +commit 6b2ae93506d6795f87d6993bebfcb4e6632508ee +Author: Dave Airlie +Date: Fri Jun 15 23:30:04 2007 +1000 + + sdvo: add support for RGB outputs on SDVO + + This lights up my monitor VGA-1 - it doesn't look the best though + +commit 671ba03befebfdd7256855858987aabc28b2e8cd +Author: Eric Anholt +Date: Wed Jun 13 16:30:26 2007 -0700 + + Fix and enable the 915-class planar textured video path. + +commit 6c29e0bae5f1e7cee02b678418394abb971594eb +Author: Eric Anholt +Date: Wed Jun 13 13:40:39 2007 -0700 + + Improve the drm_i915_flip_t check. + +commit 420e41e7921d3cc07c784fd17936ec8a675f3b20 +Author: Eric Anholt +Date: Wed Jun 13 13:34:26 2007 -0700 + + Revert "Replace failure-prone configure test for fresh libdrm with a simple ifndef." + + This reverts commit c2b130354aecffbeb2a2d23c7371461feaf5766a. + + Sadly, a non-working DRM_IOCTL_I915_FLIP already existed. + +commit 51612e5ac3ddfb2bb172c58f2dfff9631093b69c +Author: Eric Anholt +Date: Tue Jun 12 16:09:54 2007 -0700 + + On hang, dump up to the head pointer, not just up to the tail. + +commit ceb6dd72443c094212b0281c42cbe92e9a29f682 +Author: Eric Anholt +Date: Mon Jun 4 16:37:53 2007 -0700 + + Fix context switching between DRI and X. + + Now, all 3D pipeline consumers in the driver just call + IntelEmitInvariantState(), which handles basic state setup, the caching of that + state setup, and notifying DRI clients. This also removes a mistaken idle + wait in the Render code which was papering over the brokenness in the context + switching. + +commit c2b130354aecffbeb2a2d23c7371461feaf5766a +Author: Eric Anholt +Date: Tue Jun 12 08:49:21 2007 -0700 + + Replace failure-prone configure test for fresh libdrm with a simple ifndef. + +commit 0e1deb607f94e4aa3ec4b9df8ff7a07a1c95e31d +Author: Eric Anholt +Date: Mon Jun 11 17:33:33 2007 -0700 + + Fix a typo in _3DSTATE_DEPTH_SUBRECT_DISABLE definition. + + This is already fixed in the definition in the 3d driver. + +commit 8d7a0ccd4f674659eb781def2cfdc3a6e5a219ce +Author: Eric Anholt +Date: Mon Jun 11 17:33:07 2007 -0700 + + Clean up some nits in i915_video.c setup. + + - The screen dimensions were used for the clipping despite drawing being done + to any pixmap, not necessarily the screen. + - One piece of state setup was not documented anywhere, and isn't used in other + 3d hardware paths that also work. + - A 3DSTATE_MODES_1 command (830-class only) was issued even though it no + longer exists. + +commit 15caa64a497dcc0eacb0f91166d9b70206a8db35 +Author: Keith Packard +Date: Fri Jun 8 18:44:28 2007 -0700 + + Add description for how to use the frame and pixel counter registers. + + The 24-bit frame and pixel counters were not described in detail and + will be useful for DRM. + +commit 404fd47573f855b0442d49a383542fc093825ad0 +Author: Wang Zhenyu +Date: Wed Jun 6 11:01:48 2007 +0800 + + Enable overlay on G33 class chipsets + + Which have to use gfx vm offset fot setup overlay regs. + +commit f4c05973d391bdb0a9b0eadb155548310baa98fd +Author: Wang Zhenyu +Date: Tue Jun 5 11:07:41 2007 -0700 + + Add support for the G33, Q33, and Q35 chipsets. + + These chipsets require that the hardware status page be referenced by an offset + in the GTT rather than a physical memory address, so the X Server allocates it + rather than the DRM. + +commit 36fcaeb2ef94db5399071540bba106dec3db81d5 +Author: Eric Anholt +Date: Mon Jun 4 15:58:31 2007 -0700 + + Fix misplaced merge of 1280x768 panel fixup. + +commit 8a19e7d57bc23dd163b45e0ab7deca4f074c934d +Author: Keith Packard +Date: Tue Jun 5 00:09:57 2007 -0700 + + Always ensure the pipe A is lit when activating overlay on pipe B. + + Ok, so moving video from pipe A to pipe B still requires that pipe A be + active during the transition. Instead of trying to be fancy, just ensure + that pipe A is running on each transition to pipe B. + +commit e986f6cb62f8644c5fa835bd7dfb7b014c2677c5 +Author: Keith Packard +Date: Mon Jun 4 23:52:23 2007 -0700 + + Automatically switch overlay when crtcs are reconfigured. + + As crtcs are disabled and enabled, make sure the automatic crtc selection + mechanism drives overlay configuration at each request to display an image. + +commit 0984c1fc0963f1ebab31f5b8fce5ad4c387fbd2c +Author: Wang Zhenyu +Date: Thu May 31 10:17:26 2007 +0800 + + Add pci ids for 945GME + +commit 88ee25ebad78e54d243d728b775a69365359b5fb +Author: Wang Zhenyu +Date: Thu May 31 10:13:30 2007 +0800 + + Add pci ids for 965GME/GLE chip + +commit 92e4deb50e049cc83cbde4995ba0b901feceb15a +Author: Keith Packard +Date: Wed May 30 11:49:07 2007 -0600 + + Extend XV_PIPE range to include new -1 value + +commit 888a4a5f469bf955e3ee3e184b628808ae8a4498 +Author: Wang Zhenyu +Date: Wed May 30 14:42:35 2007 +0800 + + Fix i965 render's draw clip rectangle + + Use scrn's virtual size is not correct in rotation rendering. + This fixes initial rotation problem on i965. + +commit 516fb73ffee0aea7cf892e6703d37f8ecf52b812 +Author: Eric Anholt +Date: Tue May 29 10:22:25 2007 -0700 + + Remove README statement that 830M panels are unsupported. + +commit 72462568da589054828b72ace83232a71636ee73 +Author: Eric Anholt +Date: Tue May 29 10:21:12 2007 -0700 + + Expand manpage description of outputs supported. + +commit 906b974bfeeed18d79c244ad3db4f5d30e13e4c8 +Author: Eric Anholt +Date: Tue May 29 09:49:08 2007 -0700 + + Add a fixup to LVDS panel mode detection for 1280x768 panel from text mode. + + Apparently some BIOSes will program a small mode with large blanking instead of + using the pannel fitter. + +commit 4b2781291844b61b397e257a0fdb43e964e5f603 +Author: Keith Packard +Date: Sat May 26 10:09:11 2007 -0700 + + Mark IVCH as connected when detected + +commit 2a365eab0178c28782fba97bdd22365f30ce8963 +Author: Keith Packard +Date: Sun May 27 12:35:55 2007 -0700 + + On i830, Pipe B cannot be lit the first time unless Pipe A is running. + + I don't understand it, but just like the video overlay, if Pipe A is not + running, Pipe B will not turn the first time it is activated. This + patch restructures the code used for the video overlay to share it + with the crtc commit function. + +commit ff8c8cb869a3c780dbd826f7c94f06e4f3fda6af +Author: Keith Packard +Date: Fri May 25 20:29:59 2007 -0700 + + Compute and clip to crtc before call to xf86XVClipVideoHelper. + + By clipping to the crtc ahead of time, xf86XVClipVideoHelper will + correctly clip to the bounds of the crtc, eliminating the need for any + custom crtc clipping. + + Also, replace the broken xf86XVFillKeyHelper with a private version that + doesn't end up stuck with the wrong clip list when the root window changes + size. + +commit 33f635d79fe891079558fd909d564f3cf424c482 +Author: Keith Packard +Date: Fri May 25 17:32:06 2007 -0700 + + Ensure Pipe A is active when enabling overlay the first time. + + The overlay on the i830 appears to be clocked by Pipe A when being enabled. + If pipe A is not running, it will freeze the overlay and blank the screen. + Setting a random mode on the Pipe and turning it on fixes this problem + nicely. + +commit ff0ac8ea63dd6e55573652c5826c482881da0d62 +Author: Keith Packard +Date: Fri May 25 17:26:15 2007 -0700 + + Xv does not require directRendering + +commit 109e5d597b76f7414601cb39c07b133ebf1b0e61 +Author: Keith Packard +Date: Thu May 24 11:40:50 2007 -0700 + + Clean up CRTC selection. Remove more overlay blocking. + + Create separate CRTC selection function, use ints instead of floats for + coverage measurement. Remove pipe stalls waiting for overlay update. + +commit dfb1ec9a07f74125cb1724d41ed4342c4714e12b +Author: Keith Packard +Date: Thu May 24 11:23:44 2007 -0700 + + Eliminate blocking for video overlay. + + No need to block for the overlay; just use the idle buffer. This will + always work because the buffer switch occurs at vblank time, so there is + always plenty of time to get the next buffer contents in place before it + starts getting scanned to the screen. + +commit d172344599585e11388e59659dc9aaa86d7a31c1 +Author: Keith Packard +Date: Wed May 23 20:00:16 2007 -0700 + + Reformat i830_video.c to four-space indents. + + Yes, I can't stand it anymore. it's a huge patch, but + git-diff -w shows no changes. + +commit 02935ced3fba598a01d908ae49ccc30cbcc765a8 +Author: Keith Packard +Date: Wed May 23 19:24:25 2007 -0700 + + Clean up overlay management. + + Create separate on/continue/off functions for overlay. + Manage overlayOn boolean within those functions. + Eliminate redundant management code in other routines. + +commit 08753f9b79f3f09879a18b552d90d88dbf52d4be +Author: Keith Packard +Date: Wed May 23 18:59:10 2007 -0700 + + Use FLIP_CONTINUE with ~OVERLAY_ENABLE to turn overlay off. + + This makes the overlay work on i830 with the modesetting driver. I don't + know why the pre-modesetting driver worked without this, but it did. + A more 'correct' fix would be welcome, but this does seem to do the trick. + +commit aa187186dc4f2d770a642060fe54f547ea8952b3 +Author: Keith Packard +Date: Mon May 21 10:49:08 2007 -0700 + + Automatically select crtc based on coverage. + + By default, select crtc based on which one covers more of the video output. + pipe property can be used to override selection when both have partial + coverage. + +commit f5017a06a271bba0ace3c5415b78e78bc0c96f22 +Author: Keith Packard +Date: Sun May 20 17:25:33 2007 -0700 + + Use CRTCs instead of pipe indices for video pipe selection. + + Replace pipe indices with crtc indices and store references to the xf86Crtc + objects in the video private structure. + +commit 2df87256df755e972eb884bc742832038a020b2c +Author: Keith Packard +Date: Sun May 20 17:23:26 2007 -0700 + + Dump pending ring on crash. + + When the hardware locks up, dump the pending commands in the ring for + analysis. + +commit 9971fac87622c93503540196e1756fded3d4869e +Author: Michel Dänzer +Date: Tue May 22 10:46:39 2007 +0200 + + i830: Provide new DRI texOffsetStart hook when available with EXA. + +commit 5390a2e2611950d3f48cc735df4a0c37bc5377a5 +Author: Michel Dänzer +Date: Fri May 18 17:51:36 2007 +0200 + + Update vblank pipes when a pipe gets disabled. + +commit 4120a20626998272424225261f2cf7960b7ec0ca +Author: Wang Zhenyu +Date: Fri May 18 10:10:34 2007 +0800 + + EXA: add render enter helper function + + That notify mesa rendering is smashing the state, and check last 3d + operation to do sync after we're swapped in or others. + +commit 8db28aeaa6e908017b40bd9180f144a2972f6278 +Author: Wang Zhenyu +Date: Fri May 18 09:54:34 2007 +0800 + + Fix ring debug code + + Use proper unsigned type for timer variables, and try to dump 965G state. + +commit 16e50a91dd8b3676e8ce06052c549ab27e6843b7 +Author: Wang Zhenyu +Date: Fri May 18 09:53:36 2007 +0800 + + EXA: remove a flush cmd in i915 render code + +commit 12a9fcfe1b25cee850380d8ce11ef11cde9aaacb +Merge: b930bb9 e89d5f2 +Author: Keith Packard +Date: Thu May 17 15:11:29 2007 -0700 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit e89d5f275442915cc7777e75d3fcf7e7ed0f2084 +Author: Keith Packard +Date: Thu May 17 15:00:12 2007 -0700 + + Make each output control clones/crtcs. Split DVO into LVDS, TMDS, TV. + + Move clone/crtc config into each output where it's easier to understand (no + need for a switch statement in I830PrepareOutputs. Also, split DVO into + three sub-types (TMDS, LVDS, TVOUT) as those have different cloning + abilities. + +commit a441954630c6cdabbf463bfc3404160f97a04b4f +Author: Keith Packard +Date: Thu May 17 14:11:49 2007 -0700 + + Enable panel fitter on ivch DVO. + + Using BIOS source code as a guide, set up the panel fitter on the ivch. This + involves setting the pipe to the panel fixed mode, the DVO to the source + size and assigning vertical and horizontal scaling factors in the ivch + itself. + +commit c0daa0a982e7074af4b50653b4a45b0a6352b43d +Author: Keith Packard +Date: Wed May 16 14:02:00 2007 -0700 + + Change DVO module interface to pass more state across. Fix IVCH display. + + The DVO module interface reflected most of the xf86Output API to the + underlying functions; finish that work given the changes that have since + occurred in the xf86Output API. + + Move the LVDS-specific code into the IVCH module and make that work on the + Thinkpad X30 (an i830-based laptop). Panel scaling does not work yet. + +commit b28817a87a1608e849e4a9a736dda43533a84b0c +Author: Keith Packard +Date: Wed May 16 13:59:36 2007 -0700 + + Add i830_bios_get_aim_data_block to read AIM data from BIOS + + Add-in modules have per-module data in the BIOS which contains configuration + information which cannot be entirely discovered. + +commit b31bef1a8effa9acb6de7edd206b9d8c48d88144 +Author: Keith Packard +Date: Sat May 12 20:04:31 2007 -0700 + + Deal with i830 CRT load detection which cannot use FORCE_BORDER. + + Chips newer than the i830 can force the border color for the active period + of the screen, allowing the load detection to easily see the right data. In + addition, newer chips appear to have more sensible load detection hardware + which either ignores inactive periods on the screen or performs some + longer-term averaging. The i830 appears to provide unfiltered samples of the + detected load. + + For the i830, then, emit a border at the bottom of the screen and, for load + detection, simply turn it purple and wait for the current line to be within + the border. Sample an entire scanline, counting the number of times the load + detection sees a monitor. In my testing, the presence of a monitor will + cause the detection to succeed every time, while the absense will cause it + to fail about 75% of the time. The code here, checks for presence at least + 75% of the time, which should be adequate. + + Also, as the new mode configuration code has already taken care to enable + the CRT output, eliminate much of the load detection code which is simply + duplicating functionality from the general mode setting code. This should + result in faster load detection as this code will now run in no more than + one frame time. It does burn the CPU the whole time though, polling the + displayed scanline register. + +commit b930bb9d6da8c24dbe0949afb7bb2aa4bcb24687 +Author: Eric Anholt +Date: Thu May 3 13:44:12 2007 -0700 + + Disable vblank interrupts when no DRI clients are running. + (cherry picked from commit 6621dd71ada839f4c1742e9e5b272e924cee21d9) + +commit 3b769af53e0ef6ef9b56afd679446c73a0e63ea5 +Author: Eric Anholt +Date: Thu May 3 13:44:12 2007 -0700 + + Disable vblank interrupts when no DRI clients are running. + +commit 775fc125aa7ecd0f054959ef210be2df4dc54345 +Author: Dave Airlie +Date: Thu May 3 20:58:50 2007 +1000 + + i810: be a bit more verbose about disabling DRI + +commit 34f362d099d255f8f0bb34e9de30f953ee770163 +Author: Eric Anholt +Date: Wed May 2 15:40:49 2007 -0700 + + Fix typo s/i/index/ in LoadPalette for depth 16. + + Reported by: Haihao Xiang + +commit f850d4727a2ad55c2116d0788f6684b2a0192d24 +Author: Eric Anholt +Date: Wed May 2 14:16:21 2007 -0700 + + Make up a fixed panel timing for DVO LVDS, and use DVOA for DVO LVDS. + + The fixed panel timing will only be available when the LVDS is already on + at X startup. + + So far, our only mostly-working LVDS driver is for the i830, and on i830 the + LVDS is always on DVOA, so use that for all LVDS chips. This may need to + change if we support the ch7017 I've seen used on embedded i845, for example. + +commit f3168e3b0c5664a322ca6bb1c81fc94844cb30ab +Author: Eric Anholt +Date: Wed May 2 14:08:30 2007 -0700 + + Disable non-working GTT decoding on i830, and fix map/unmap of GTT. + +commit 1fc630f24f8ad9e304cb0761f9cacca2224203c4 +Author: Eric Anholt +Date: Wed May 2 13:29:21 2007 -0700 + + Add DVO[ABC] register debugging. + +commit d0ec37e9c0ceab1080700cd7be4a7cc58552d465 +Author: Eric Anholt +Date: Tue May 1 15:56:37 2007 -0700 + + Make the DVO output name LVDS if it's an LVDS chip. + +commit 490d05f99d2b62dd612d514d9ae0badbac9285ce +Author: Eric Anholt +Date: Tue May 1 15:47:01 2007 -0700 + + Fix typo in previous commit with s/XF86_DRI/XF86DRI/ + +commit c7bb34e83d7c459d932d01070cfeffbbf6c703ac +Author: Dave Airlie +Date: Wed May 2 14:25:39 2007 +1000 + + disable all outputs on EnterVT + + This disables all outputs on EnterVT as the SDVO output can confuse + the VGA output if the BIOS has enabled it on the same pipe but X + isn't going to use the SDVO. + + Worked out on irc with keithp + +commit cae0ae237b79fa7d3a82dfc8d3fb595ccb6c63e1 +Author: Samuel Thibault +Date: Tue May 1 12:41:18 2007 -0700 + + Bug #10714: Fix build without DRI. + +commit 6748d620fbf39dd98982856c09256bdec0fc82a1 +Author: Eric Anholt +Date: Mon Apr 30 17:27:23 2007 -0700 + + Ignore VideoRam now that its original purpose is obsolete. + + It had been necessary to allow more than a small amount of memory to be + allocated, but now those old small allocations people had configured are + getting in the way. + +commit a4f1a7872f6f959bb4bc6568face710bee3589de +Author: Eric Anholt +Date: Mon Apr 30 17:13:09 2007 -0700 + + Allow physical-memory allocations within stolen memory. + + Because stolen memory happens to be a contiguous block of high system memory, + we can just read the GTT entries for it to get physical addresses for our + allocations there if needed. This reduces fragmentation of the aperture space, + and will often reclaim up to 7 MB of memory that had been left unused since the + simplified aperture manager was put in place, but without reintroducing the + complexities of the old aperture manager. + +commit 7d0d34cfdcc67d07e7667e13a9413743853134f8 +Author: Eric Anholt +Date: Mon Apr 30 10:39:54 2007 -0700 + + Disable some clock gating functions documented to work incorrectly. + +commit 138ac8f36cb4e4b3776f313955372522646acbb2 +Author: Wang Zhenyu +Date: Sun Apr 29 14:43:19 2007 +0800 + + Alloc state mem buffer on 965G for xaa rotation + + 965G needs state mem buffer to setup render pipeline. + Thanks Barry Scrott for report this. + +commit 0cd524e5411e35c8483c02ecc5062625809e6fc6 +Author: Kristian Høgsberg +Date: Wed Apr 25 18:09:10 2007 -0400 + + Implement the custom I2C protocol used by the ivch DVO. + + The ihch DVO uses a modified I2C addressing scheme as described + in section 5.2 of the data sheet. Implement this by over-riding + the I2C read and write word routines. + +commit 880314aabe6326ed56517034940f0e10fb16e866 +Author: Keith Packard +Date: Tue Apr 24 11:37:08 2007 -0700 + + CRTC Rotation under XAA wasn't hitting accelerated path. + + The server rotation code is now using the root window in IncludeInferiors + mode rather than using the screen pixmap. Change the XAA Composite code + to check for this case now. + +commit b23eae55c8cdd73e0aba1bf7ced283d402ee6470 +Merge: 31bf269 cebdb8b +Author: Keith Packard +Date: Thu Apr 19 20:38:18 2007 -0700 + + Merge branch 'origin' + +commit 31bf269afed0a830e79cbbd9d4b1ee9843af326c +Author: Keith Packard +Date: Thu Apr 19 20:03:41 2007 -0700 + + Update version to 2.0.0 + +commit cebdb8bfc6170a0fb441039f4422917fd0c77e70 +Author: Wang Zhenyu +Date: Fri Apr 20 10:54:34 2007 +0800 + + EXA: set enabling bits properly for i830 + + This was found when debug exa on a 865GV, we should set + pipeline state bits properly, otherwise the engine will hang. + +commit 60e891915af7d0f522c9c3f966599fa07779f7aa +Author: Keith Packard +Date: Thu Apr 19 14:02:23 2007 -0700 + + Eliminate LinearAlloc option and code. + + With the fixes to the 2D frame buffer allocation that allows up to 65536 + lines of 2D frame buffer in XAA mode, the old linear allocation hacks are no + longer necessary. + +commit cca389769001c657435f056e1f1c26b0f52a48bd +Author: Keith Packard +Date: Thu Apr 19 13:15:23 2007 -0700 + + Clean up 1.2 xserver build support. + + Convert relative X server source path to absolute. Check for local copies + of needed header files before building, rather than requiring server source. + Remove extra duplicate -I elements in AM_CFLAGS in sub directories. + +commit 07797fee88d6be0dfb30394a419dd86f8a3c9095 +Author: Keith Packard +Date: Thu Apr 19 13:01:37 2007 -0700 + + Fix mismatching braces when XF86DRI_MM is not defined. + + A closing brace was left inside #ifdef XF86DRI_MM while the matching + open brace was outside. + +commit 163c565527e8cda1f5a47c7fd63f04c80feaf3c7 +Author: Keith Packard +Date: Thu Apr 19 13:00:03 2007 -0700 + + Use I2C delay function instead of usleep. + + usleep isn't always available, and we have an existing delay mechanism + available to use. + +commit 378ceea3d9ddbec7a08ac2f07f9a8cd9cf3cef36 +Author: Wang Zhenyu +Date: Thu Apr 19 17:30:28 2007 +0800 + + Fix mem list order and remove extra unbind call when free memory + +commit db4b9e18810990e8900bdf54aa3091b876ea2658 +Author: Alan Hourihane +Date: Wed Apr 18 13:52:08 2007 +0100 + + Fix return status + +commit 3f5111940e35989d334aa99cd1b0eb26293ebf1b +Author: Alan Hourihane +Date: Wed Apr 18 13:27:59 2007 +0100 + + Update read_response to include the try on PENDING status + + and remove it from get attached displays call. + +commit 902388fa06f85486fe8010807ab53e4926cc979a +Author: Eric Anholt +Date: Tue Apr 17 14:21:25 2007 -0700 + + Don't try to init the XAA linear region unless we allocated memory for it. + + Reported by JM Ibanez + +commit 8abecae202b609375b6754dbd5ecce3d59036daf +Author: Eric Anholt +Date: Tue Apr 17 12:28:43 2007 -0700 + + Fix i852 EXA Composite acceleration setup. + + Reported by JM Ibanez. + +commit 2dbe8d678b02b724c4f06255383f49bb4c2708b0 +Author: Timo Aaltonen +Date: Mon Apr 16 14:14:19 2007 -0700 + + Fix build against xserver 1.2. + +commit a089ac11beb4c801928c17780401e913bc0d5257 +Author: Eric Anholt +Date: Tue Apr 17 11:01:05 2007 -0700 + + Add all the possible ivch slave addresses (still commented out). + +commit 37ee68a95ca8c86ebe9abafaaf55b060dd2a2f73 +Author: Eric Anholt +Date: Tue Apr 17 10:50:02 2007 -0700 + + Bug #10438: Fix 965 XV when sourcing from less than the full image. + + Bob deinterlacing in MythTV, and the zoom options in totem would result in + attempting to source from outside the video instead of scaling appropriately. + +commit ac9181c014638dbeb334b40b4029d0ccb2b7a0fc +Author: Alan Hourihane +Date: Tue Apr 17 16:30:17 2007 +0100 + + Check for the PENDING message when reading the attached + displays. Ensures the command has completed before continuing. + + (probably need to check PENDING in other SDVO calls too) + +commit ab5bdee8a62c842ae32aaef57eb841ebcb644d2b +Author: Wang Zhenyu +Date: Tue Apr 17 16:23:46 2007 +0800 + + EXA: fix i830 render + + Fix tex blend pipeline in case that src/mask pict has no + alpha. Unmask color buffer write disable bits. These make + rendercheck run fine on 855GM. + +commit 1a29750b8dba1371d7d0802744cdf2f3bfa83c13 +Author: Wang Zhenyu +Date: Mon Apr 16 16:21:39 2007 +0800 + + EXA: fix 830/845G pict format + + Fallback in 830/845G when pict format is a8, x8r8g8b8 or + x8b8g8r8. The hw doesn't support them. + +commit 3a634bbd198650c1597dec4306d99928374c30f3 +Author: Wang Zhenyu +Date: Mon Apr 16 15:14:49 2007 +0800 + + EXA: Add i830 supported pict format XRGB8888, XBGR8888 + +commit 3bcb9a0b4ba7f3df346b5708617a7aafcbe2490a +Author: Wang Zhenyu +Date: Mon Apr 16 14:27:49 2007 +0800 + + EXA: i830 render misc fix and cleanups + + Try to map texture stream when setup texture map, and use + correct order in load_immediate_1 cmd, which fixed crash on + 845GV. Also remove some flush cmds. + +commit 64c30cf896f8bde3ee74c92b970132ab91b418cd +Author: Wang Zhenyu +Date: Mon Apr 16 13:58:50 2007 +0800 + + Update intel.man with 965GM chipset support + +commit b67adb6de34cede0e31f02f26cd5ec7b1adfa586 +Author: Wang Zhenyu +Date: Fri Apr 13 22:34:52 2007 +0800 + + Fix crash on G965 XAA with LinearAlloc option + + We should alloc xaa_linear mem in LinearAlloc case, otherwise + we get crash when initializing xf86 fb manager. + +commit b5b243e4120d6a048fb6bbe8814fe3184271e9d9 +Author: Eric Anholt +Date: Thu Apr 12 12:34:23 2007 -0700 + + Add license headers to 965 programs. + +commit 08cd5f9b0f086e51112008d50de48556372899f9 +Author: Eric Anholt +Date: Tue Apr 10 11:26:46 2007 -0700 + + Bug #10520: i810 manpage not installed despite users expecting it to be there. + + Install it as an alias to intel.4x, since we're letting people load the driver + as "i810" still. + +commit bf9771e9711361632afe3abeeedca7ce03497005 +Author: Eric Anholt +Date: Mon Apr 9 15:26:05 2007 -0700 + + Don't use extended regexps in sed when not necessary. + + Some seds require a flag to enable extended regexps. + +commit 656fbd952542ba5ddc9b018071008ceb38b1bd19 +Author: Brice Goglin +Date: Mon Apr 9 13:06:46 2007 -0700 + + Bug #10515: Fix module version number with more than one digit per field. + +commit aa850d3c633a510d787ee59e538e26e5c3acbf4a +Author: Eric Anholt +Date: Mon Apr 9 11:44:25 2007 -0700 + + Turn off ALWAYS_SYNC in EXA. + + This slipped in as a debugging aid, and never got turned off. The driver + appears to work fine without it on an i915 system, and for the non-default EXA + option, we'd rather see issues found than continue running with debugging aids + and hiding them behind bad performance. + +commit d2e75d8acde2541b85a0050d9e47182c1db7fc2c +Author: Eric Anholt +Date: Mon Apr 9 11:34:57 2007 -0700 + + Avoid a magic number and correct a (currently harmless) ifdef in ResetState(). + +commit 9ed446e12bd21b7c8222c6e63a03a8e2ec6b97e2 +Author: Eric Anholt +Date: Tue Apr 3 11:39:48 2007 -0700 + + It's 2007 now. Didn't I get the memo? + +commit d9d05b553ca1f98efc230ef13f34576122311ac1 +Author: Eric Anholt +Date: Tue Apr 3 00:15:02 2007 -0700 + + Bump version to 1.9.94 for 2.0 RC4. + +commit eb45315b07624cb0506d539f523728a651efb798 +Author: Eric Anholt +Date: Mon Apr 2 18:20:33 2007 -0700 + + Move README to being a plain old text file. + +commit 9b78208f1ef1a8ee98f2aa139956659169e234ab +Author: Eric Anholt +Date: Mon Apr 2 18:20:15 2007 -0700 + + Move a bunch of debugging verbosity under Option "ModeDebug". + +commit 9ea83d440d6b9e30d4627e34168226a6b4b2a841 +Author: Eric Anholt +Date: Mon Apr 2 11:39:27 2007 -0700 + + Update README source for new release notes. + +commit c6d0bf9fb6033339159d98dc2b9fe44759ad9de5 +Author: Eric Anholt +Date: Mon Apr 2 10:09:43 2007 -0700 + + Remove long-stale TODO file. + +commit c59e5895a0ea1f219c8f63a02b429a024bd1ed66 +Author: Dave Airlie +Date: Mon Apr 2 07:18:04 2007 +1000 + + make warning info only so ppl don't go reporting stupid bugs + +commit e119eaabb2ad1ffc1d83f18199f49c52ec71b0fe +Author: Eric Anholt +Date: Fri Mar 30 17:09:18 2007 -0700 + + Warnings cleanup in ch7xxx. + +commit fd98e88d1a6e0e8d35bda868e7afcb78d2d11524 +Author: Eric Anholt +Date: Fri Mar 30 17:07:29 2007 -0700 + + Finish off some function renaming that was missed before. + + Thanks to alanc for catching this. + +commit 274b99e5e750228eba9a67773725a40ebaa9bf56 +Author: Eric Anholt +Date: Fri Mar 30 17:06:43 2007 -0700 + + Don't forget the warnings CFLAGS in subdirectories. + +commit aa6a9abb34e93780c07563ab5b21d8c064ea0a1c +Merge: 670c852 107ac12 +Author: Keith Packard +Date: Fri Mar 30 12:10:17 2007 -0700 + + Merge branch 'crestline-qa' + +commit 670c8521f18f01b9ea899ceb68d2a3dbb884b199 +Author: Eric Anholt +Date: Thu Mar 29 13:43:31 2007 -0700 + + Add missing file for old server compatibility build. + +commit 89c84f939f2dbed1d03a5f0e1daae23a229e47bc +Author: Eric Anholt +Date: Thu Mar 29 13:40:52 2007 -0700 + + Whitespace cleanup in Makefile. + +commit 6cd3b2c2de4596886aab85988b16cf63e8887add +Author: Wang Zhenyu +Date: Tue Mar 27 15:34:32 2007 +0800 + + EXA: i830 fix blend action + + i830_get_blend_cntl() has already added S8 offset. + +commit 35b3dd881a333569ce20ddf36b915b095757a1ba +Author: Wang Zhenyu +Date: Tue Mar 27 15:33:43 2007 +0800 + + EXA: fix i830 componentAlpha support + + Pick fix from i915 render, change tex blend pipeline for CA. + +commit df96d9a11d038ad64673022ce14c24223b3bd34c +Author: Wang Zhenyu +Date: Tue Mar 27 15:32:53 2007 +0800 + + EXA: fix i830 texture setup + + Use LOAD_IMM_2 helper cmd for tex setup. Enable RepeatNormal + support. Fix A8 format, i830 can support it now. + +commit aa78e67553ffe8ca986330f0ee49b5414c71a71f +Merge: 768821b 2191634 +Author: Eric Anholt +Date: Mon Mar 26 22:00:36 2007 -0700 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 107ac12867eda6b86212159db15c640d3490f2da +Merge: 6548817 2191634 +Author: Nian Wu +Date: Tue Mar 27 12:51:45 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 768821bd3832aad01e44856199e60c6b7726a83b +Author: Eric Anholt +Date: Mon Mar 26 21:27:54 2007 -0700 + + Bump version to 1.9.93 for 2.0RC3. + +commit 2191634dd67b3219bb88f365bcf951d5a58140e8 +Author: Alan Coopersmith +Date: Mon Mar 26 14:58:41 2007 -0700 + + Add Solaris to list of OS'es with agpgart in man page + +commit 1c809f92467f97b098bcc89d66e60f6f88d9bade +Author: Eric Anholt +Date: Mon Mar 26 13:03:28 2007 -0700 + + Update .gitignore. + +commit f7befe50af4c13554d1f7aee6b05848ac312411b +Author: Eric Anholt +Date: Mon Mar 26 13:01:11 2007 -0700 + + Power on the LVDS B-channel pairs only when we've chosen dual-channel mode. + + It was basing off of the clock rate, but we have an override to use the + existing dual channel state when we can detect it, so the two settings were + conflicting. + +commit 827dc457a4fd0b97c95ec696ec9c3cd2f4a4becb +Author: Eric Anholt +Date: Mon Mar 26 12:45:23 2007 -0700 + + Update manpage to remove Rotate option and point at xorg.conf instead. + + While here, update a few other bits as well. + +commit 654881794ae1ad7214e85091b9015ae0fbdc5ddc +Merge: 6de3edc d572771 +Author: Nian Wu +Date: Mon Mar 26 17:00:11 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit d5727717c9141be28a69b1154ccd23c23207f8f6 +Author: Keith Packard +Date: Sun Mar 25 23:44:59 2007 -0700 + + Switch TV_FORMAT property to format XA_ATOM + + This allows the driver to report the set of valid formats in the property + data. + +commit 6de3edcb52e6258f1af75e4f4bef73de1698445d +Merge: d874aa3 1e6e675 +Author: Nian Wu +Date: Sat Mar 24 17:00:13 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 1e6e675524461ef0eb1983de89e2877426571a55 +Author: Keith Packard +Date: Fri Mar 23 23:42:52 2007 -0700 + + Eliminate calls to RRPostPendingProperty. + + RRPostPendingProperty has been removed in favor of RRPostPendingProperties, + and that call is now managed outside of the driver. + +commit 28da6f4e307880326dd553f50fe3fff3b9be9f4f +Author: Keith Packard +Date: Fri Mar 23 14:36:42 2007 -0700 + + Record 3D state loss at EnterVT in last_3d value. + + last_3d set to LAST_3D_OTHER indicates that the 3D hardware has unknown + state. + +commit ab19439cf4592e4607dc0bfc602aba3d56645a42 +Author: Keith Packard +Date: Fri Mar 23 14:34:27 2007 -0700 + + Don't call AdjustFrame on EnterVT. + + AdjustFrame is strictly for legacy compatibility; calling it on EnterVT + wrecks crtc positions. + +commit d874aa31599da4777438cc51469afe9b66601f55 +Merge: 94dbc37 26f32ef +Author: Nian Wu +Date: Fri Mar 23 17:00:12 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 26f32ef680a19e63af4b7c8c84141fe32263f298 +Author: Keith Packard +Date: Fri Mar 23 01:17:58 2007 -0700 + + Property size is in units, not bytes. + + Several places were using byte lengths instead of unit lengths for + properties. + +commit f48dc501fbf74e0ac348f0b77750016597849ef4 +Author: Keith Packard +Date: Fri Mar 23 01:08:08 2007 -0700 + + TV output properties: TV_FORMAT, LEFT, TOP, RIGHT, BOTTOM. + + Remove TV format from mode name, instead use an explicit output property and + split the input resolution from the tv format. Add properties to set the + blank area on all four sides of the image. + +commit 94dbc3725358d63fe0ac8e6749489c993d24ede2 +Merge: 28af380 20b2685 +Author: Nian Wu +Date: Thu Mar 22 17:00:15 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 20b26854abdacb6dc45cba2d81d515b2e47e25f1 +Author: Wang Zhenyu +Date: Thu Mar 22 10:33:15 2007 +0800 + + EXA: don't smash vertex header in G965 + + Originally we smashed vertex header to store texture + coordinates, this is working as we only use sf/wm kernel + and disable all other stages on pipeline. But better to + not do this. This also cleans up vertex elements state + and makes vertex buffer order looks "normal". + +commit 28af380ab133eb14d21dc650c77bdbab66576255 +Merge: 300e893 e06c5f7 +Author: Nian Wu +Date: Wed Mar 21 17:00:04 2007 +0800 + + Merge branch 'crestline' of git://otc-graphics.jf.intel.com/git/xorg/driver/xf86-video-intel into crestline + +commit e06c5f727fb2e2de111ac9e691a877c56d2ca1b4 +Merge: 0202399 3025fa0 +Author: Wang Zhenyu +Date: Wed Mar 21 15:04:21 2007 +0800 + + Merge branch 'master' into crestline + +commit 02023998663cc7f0735fadfb1719d93dc2e5a112 +Author: Eric Anholt +Date: Wed Mar 21 00:00:56 2007 -0700 + + Whitespace and symbolic reg names cleanup in i830_panel_fitter_pipe(). + +commit 3e9ec78b4f54defb9986e11e6f2ac3475755849d +Author: Eric Anholt +Date: Tue Mar 20 23:58:48 2007 -0700 + + Set the panel fitter to the right pipe on Crestline. + +commit 3025fa0fb2bf5ace7076796e45e2560fe8410e8d +Author: Wang Zhenyu +Date: Wed Mar 21 14:50:45 2007 +0800 + + EXA: try to enable rotation for G965 + + The new sf/wm should handle the texture sampling only in + rotated case. Also fix possible hole in VUE slot. + +commit a50009604152bf9237c40bd098b3b1da3d018929 +Merge: 0a612e7 2239448 +Author: Eric Anholt +Date: Tue Mar 20 23:32:19 2007 -0700 + + Merge branch 'master' into crestline + + Conflicts: + + src/i810_reg.h + src/i830_display.c + +commit 300e893cec19dca48e00ee25014b8714dc13b278 +Merge: 96e8699 0202399 +Author: Nian Wu +Date: Wed Mar 21 08:55:50 2007 +0800 + + Merge branch 'crestline' of git://otc-graphics.jf.intel.com/git/xorg/driver/xf86-video-intel into crestline + +commit 223944878cf38f86580df5a7d3102d86cfc061b9 +Author: Eric Anholt +Date: Tue Mar 20 14:33:53 2007 -0700 + + Attempt to fix single/dual-channel issues on i9xx LVDS panels. + + - Use the existing single/dual-channel state when available, as changing it + doesn't appear to work out. + - Set the power state of the CLKB and B0-B3 pairs according to whether + choose to go dual-channel or not. + - Restore the LVDS register at the appropriate point (before DPLLs are + re-programmed. + +commit 96e86994f3d1b4938e99a751454ee99bebfe40d3 +Merge: f465c23 0a612e7 +Author: Nian Wu +Date: Tue Mar 20 13:11:09 2007 +0800 + + Merge branch 'crestline' of git://otc-graphics.jf.intel.com/git/xorg/driver/xf86-video-intel into crestline + +commit 0a612e7115ff993bb8e9a00df13c0b0d20122fd6 +Merge: 8bb6778 4c4faf2 +Author: Wang Zhenyu +Date: Tue Mar 20 11:34:40 2007 +0800 + + Merge branch 'master' of git://proxy.ims.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + + Conflicts: + + src/i830_display.c + + Change LVDS output and postread like upstream. This might + need to be retested on 965GM LVDS. + +commit 4c4faf260eb4dad1b1919c6168fa9ef477b98a39 +Author: Eric Anholt +Date: Mon Mar 19 13:36:37 2007 -0700 + + Set the CURSOR_SIZE register when present. + + Failure to do so gets you a lot of pretty colors. + +commit 64c14204453bea3f98d19861c450612e718e6c69 +Author: Eric Anholt +Date: Mon Mar 19 13:35:43 2007 -0700 + + Print the mode actually being set per pipe. + +commit 3ce802414a20ca8af128a00e6925a099dd90ceb4 +Author: Eric Anholt +Date: Mon Mar 19 11:35:11 2007 -0700 + + Add debug output for ADPA. + +commit c21b88d838fda1f00f6f6bcfe7855d32543c6f3f +Author: Michel Dänzer +Date: Mon Mar 19 10:45:58 2007 +0100 + + Fix build when DAMAGE is not defined. + +commit 991719c21a6cc1b5d9b7cbe30d4b333718b3e686 +Author: Keith Packard +Date: Sun Mar 18 23:05:33 2007 -0700 + + Make i830_sdvo_write_sdvox write everything twice. + + For some reason, certain chips don't correctly enable the SDVO hardware when + this register is written only once. We're following what the BIOS code does + and writing it twice now, but with extra posting reads to boot. Yes, this is + cult-and-paste, but it fixes problems found on deployed hardware. + +commit 9118122a232d4cf7760bcb0874fe970c25251378 +Author: Keith Packard +Date: Sat Mar 17 21:34:03 2007 -0700 + + Allocate 4 separate buffers for HW Cursors on Linux. + + Linux cannot allocate a large fixed buffer for the HW cursors as needed for + FreeBSD; instead, allocate four separate buffers. The code now prefers to + allocate one buffer (less overhead) and falls back to separate buffers only + when necessary. + +commit 62a5399d70ac3f8579441d617f8d80c94942a32a +Author: Keith Packard +Date: Sat Mar 17 21:32:36 2007 -0700 + + Elide I830DRIClipNotify for older DRI versions. + + I830DRIClipNotify is passed to newer versions of DRI; don't include it in + the server when building against older versions. + +commit 05e0021147a89254182c277007236448f315231c +Author: Keith Packard +Date: Sat Mar 17 21:31:04 2007 -0700 + + Cast ARGB cursor address to CARD32 * to eliminate warning. + + While we're just doing a memcpy, it's nice for the two argument types to + match. + +commit d05bb5362e986c9d27bc03c7e1a939ba28824810 +Author: Keith Packard +Date: Sat Mar 17 20:21:59 2007 -0700 + + Increase DDC I2C RiseFallTime to handle older monitors + + Changing this value slows the entire I2C bus down, making it far more + reliable on older monitors. Note the same change has been made in the core X + server code; this change is included here to ensure that older X servers + work reliably with this driver. + +commit 44d1b544cec2e75735d2e27d66a9240317b962c2 +Author: Keith Packard +Date: Sat Mar 17 17:15:43 2007 -0700 + + Build fix for pre-XF86DRI_MM environments. + + Misplaced brace broke builds with older DRM libraries. + +commit a58befe9d243bd562cb4b2f08ec5c9f754148c20 +Author: Keith Packard +Date: Sat Mar 17 17:12:37 2007 -0700 + + Remove extra (and incorrect) I2C ByteTimeout setting. + + Setting the value correctly and then immediately breaking it caused many I2C + transactions to timeout with slow monitors. Oops. + +commit 9d6d9ace4bd3180a4484321c3b96a83bc4adaf84 +Author: Eric Anholt +Date: Fri Mar 16 19:41:54 2007 -0700 + + Move vendor ID check in the utils to after pci_device_probe. + + Even current libpciaccess seems to require this. + +commit a117bc9e3eb824f2056ee6416859ea3ab1fdcc30 +Author: Eric Anholt +Date: Fri Mar 16 19:39:34 2007 -0700 + + Add the (afaict) correct ch7017 I2C slave address. + +commit 29446cdb4f72e12c5249b0d4b79ea56d9fe19934 +Author: Eric Anholt +Date: Fri Mar 16 19:18:37 2007 -0700 + + Fix compile failure due to needed types being in inttypes.h on Linux. + +commit 213394fbaaf353404cbb3aaa4c20860f48ee1079 +Author: Eric Anholt +Date: Thu Mar 15 19:13:28 2007 -0700 + + Fix crashes and other failures when a cursor allocation fails. + + Now, we allocate one single block of memory for cursors, and either succeed or + fail once, rather than trying to support partial fallback modes that generally + resulted in pain due to being untested. In particular, this fixes cursors on + FreeBSD, which only allowed one large physically-contiguous allocation. + +commit 316ee682d342556b65cbd60409201591e916aac5 +Author: Eric Anholt +Date: Thu Mar 15 18:53:55 2007 -0700 + + Don't reload the cursors if we haven't set up the screen yet. + + This avoids a crash during preinit if we set a mode for load detecting. + +commit 8b06ab50bbd79dfaf4c90a6f76116ace64b85b77 +Author: Eric Anholt +Date: Thu Mar 15 10:12:14 2007 -0700 + + Fix sparse warnings about using 0 for NULL. + +commit 8ae6ad93329e2842c6f2d5b20ffeb0c14d10c0de +Author: Keith Packard +Date: Thu Mar 15 00:00:51 2007 -0700 + + Use new driver-independent CRTC-based cursor layer. + + This eliminates all of the cursor rotation code and other cursor management + infrastructure, leaving a fairly simple hardware layer in its place. + +commit 9fbef2de9edbbed9c2f6a80c4074b9b245547c45 +Author: Eric Anholt +Date: Wed Mar 14 12:34:34 2007 -0700 + + Bump to 1.9.92 for RC2. + +commit 555b801a75cafa082808bc9bb683e700fc97d79a +Author: Michel Dänzer +Date: Wed Mar 14 11:41:50 2007 +0100 + + Make sure the legacy texture area is there when needed. + + This currently only matters when the DRM memory manager is not available and + Option "Legacy3D" "off" is specified, but that hasn't always been the case and + might change again in the future. + +commit 66fdb08c83d353fbe4e917900c54b555c869eb80 +Author: Eric Anholt +Date: Tue Mar 13 17:07:10 2007 -0700 + + Refine the i855 LVDS clock code. In particular, p2 is always 14. + + This gets correct clocks detected on most harware. The SSC is always assumed + to be 66Mhz, which may not be true, but we'll fix that when we find example + hardware. + +commit 44708bdd9ebfef0328302c9a964b80deb46e57c6 +Author: Eric Anholt +Date: Tue Mar 13 16:55:38 2007 -0700 + + Get SDVO DPMS working on the Mac Mini by writing SDVOB and SDVOC together. + + Also, add code for setting the encoder power state like the BIOS does, but this + doesn't appear to work. We do much more than the BIOS does in powering things + down, so perhaps that's interfering somehow. + +commit 5135b3a79f9c30ebce78c84c49846bba83607fed +Author: Eric Anholt +Date: Tue Mar 13 10:21:06 2007 -0700 + + Use a POSTING_READ(reg) macro instead of using the (void)INREG(reg) pattern. + +commit 578da7ca705c5a58c0bd397b0831e2f95140f8ae +Author: Eric Anholt +Date: Tue Mar 13 10:11:29 2007 -0700 + + Add PCI write posting protection to i2c putbits. + +commit cf33abe43bd95c9437fad8e6201a24084ff96cb8 +Author: Eric Anholt +Date: Tue Mar 13 10:08:57 2007 -0700 + + Add write posting protection for the SDVO DPMS-on path. + +commit 9d30f0007203157e6b82fa0ffc57324490eb2ca0 +Author: Eric Anholt +Date: Tue Mar 13 10:04:06 2007 -0700 + + Replace #if 0ed LVDS register setting with updated comment. + +commit 9c17c6e9c63563cad5edff837519a73fe0afe313 +Author: Eric Anholt +Date: Tue Mar 13 09:55:49 2007 -0700 + + Add write posting protections to relevant register writes in the mode-set path. + +commit 2824ec7ccbf44ba413a6133f735f4a548c73b3cd +Author: Eric Anholt +Date: Tue Mar 13 09:53:35 2007 -0700 + + Fix uninitialized string use in SDVO non-TMDS case. + +commit f465c23750adf908c0ea874f95aad98ebd2f1015 +Merge: d33e8da 1ed3843 +Author: Nian Wu +Date: Tue Mar 13 17:00:44 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 1ed3843f73a0d8efa405daff3483ebe70bf6134f +Author: Eric Anholt +Date: Mon Mar 12 17:47:32 2007 -0700 + + Make the 965 use Y-major tiling for the depth buffer, as required by the spec. + + An example of the failure can be seen with the reflect demo when set to + depth buffer mode. + + Reported by: Haihao Xiang + +commit 7aa257154685bd2520649ce87a3a84e55644d02c +Author: Michel Dänzer +Date: Mon Mar 12 19:00:14 2007 +0100 + + Fix build against released libdrm. + +commit 7c561956a28e90667fef140bc3cfa0edca464f15 +Author: Michel Dänzer +Date: Mon Mar 12 18:55:27 2007 +0100 + + Defer flipping pages back to normal until the end of the DRI block handler. + + Doing it earlier can result in the wrong page being visible, giving the + appearance of a frozen X server. + +commit fe59ab9f562fd10118563d80eb3351a4d3b48b3f +Author: Michel Dänzer +Date: Mon Mar 12 13:03:47 2007 +0100 + + Disable page flipping if the DRM is older than 1.9. + + Older versions don't support the functionality we need. + +commit ba55ff15df974197bebd871e28bb96d817ae41c7 +Author: Michel Dänzer +Date: Mon Mar 12 13:01:00 2007 +0100 + + Fix attempt to flip pages back to normal when the last 3D window disappears. + + When this succeeds, 2D rendering does not have to be synchronized to back + buffers until the next 3D window appears. + +commit c4a23c5ef8ce56ee0fe547fbc7c6623c021f801b +Author: Michel Dänzer +Date: Sat Mar 10 16:15:33 2007 +0100 + + Remove unused have3DWindows from pI830. + +commit d33e8daa6874ced978d2a1f687c48922555f2524 +Merge: 58aeb87 797aa6f +Author: Nian Wu +Date: Mon Mar 12 09:03:52 2007 +0800 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 797aa6fcb1231587bde1efb47bc8430c4c8d8110 +Author: Dave Airlie +Date: Sun Mar 11 12:58:50 2007 +1100 + + fixup missing assert includes + +commit 43a80ef9094efcb49027c83f0e726f907fecfbb2 +Author: Dave Airlie +Date: Sun Mar 11 12:58:26 2007 +1100 + + fixup brace alignment for older X.org + +commit 0d33fd3d03cef3a7e63d88ae441354390b37a937 +Author: Dave Airlie +Date: Sun Mar 11 12:58:02 2007 +1100 + + add XMODES flags to the i2c drivers + +commit 3c2d6e07bdf8daef6486b594aef0d22460eb2585 +Author: Michel Dänzer +Date: Fri Mar 9 23:49:46 2007 +0100 + + Don't crash when the SAREA pointer is NULL. + +commit 7518b8959ee7598f3526365a83ea7e143a5d6a4e +Author: Michel Dänzer +Date: Fri Mar 9 19:50:03 2007 +0100 + + Revert change accidentally included in previous commit. + +commit 1991a90ae90b388c914985d20d6f8c3637856e9a +Author: Michel Dänzer +Date: Fri Mar 9 19:47:13 2007 +0100 + + Update SAREA pipe sizes in i830_crtc_dpms instead of i830PipeSetBase. + + This allows setting the size to 0 when a pipe gets disabled. + +commit aef161853033907c6916337cebe88c8f111dd542 +Merge: 1b54ee4 14ee919 +Author: Michel Dänzer +Date: Fri Mar 9 15:14:48 2007 +0100 + + Merge remote branch 'origin/master' into i830-pageflip + +commit 1b54ee493fb96f944aa81e56fa6f00a8067f87fc +Merge: e972265 81722a2 +Author: Michel Dänzer +Date: Fri Mar 9 15:13:50 2007 +0100 + + Merge remote branch 'origin/master' into i830-pageflip + + Conflicts: + + src/i830_dri.c + +commit 14ee9195d203192d3f613919f230b20b900ffdba +Author: Eric Anholt +Date: Wed Mar 7 13:00:03 2007 -0800 + + Bug #10157: Fix cursor corruption on server regen. + +commit 58aeb87f2e335d15eba73ce9dd1982e867c52403 +Merge: a4e7e81 81722a2 +Author: Nian Wu +Date: Wed Mar 7 16:02:03 2007 -0500 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit a5f0522b1d34236278861fe15bac2df099f0a2c7 +Author: Alan Hourihane +Date: Wed Mar 7 15:49:47 2007 +0000 + + Add some additional checks when XAA is enabled. + +commit 81722a21d232fa6cfb11fbe3d984abab50e89bcc +Author: Keith Packard +Date: Tue Mar 6 23:16:53 2007 -0800 + + Remove usage of 'shadow' module. Use xf86CrtcScreenInit. + + With the new mode setting code, rotation is handled outside of the driver, + so the old usage of the 'shadow' module is no longer needed. Code to + initialize the crtc structures has been moved out of the driver and into the + modes code. + +commit 04f50961e2f1610c39e7e4b45811f2a6b517cad6 +Author: Eric Anholt +Date: Tue Mar 6 14:23:06 2007 -0800 + + Bug #9898: Fix a crash with NoAccel set. + +commit b07dfbba5df7728232b38211c623185116dcea5c +Author: Eric Anholt +Date: Tue Mar 6 13:59:14 2007 -0800 + + Remove leftover code that was disabling tiling after we set it up. + +commit 94c37f35872487c04136fb659526bffefd9c46ad +Author: Eric Anholt +Date: Tue Mar 6 13:57:04 2007 -0800 + + Make the depth buffer X tiled instead of Y, and fix a Y tiling nit on 945. + + The previous code claimed to set the depth buffer up as Y tiled, but due to + lack of implementation in SetFence, it ended up being X tiled. Actually + setting the Y tiling flag in the new version broke the depth buffer, so just + switch the depth buffer to X tiling, which appears to work fine. + +commit a4e7e814a24dbe30a33e6ad45baeb41d190a2724 +Merge: 862088b 4042b27 +Author: Nian Wu +Date: Tue Mar 6 16:01:40 2007 -0500 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 30bb719ca0abc2599ffb89e59f297fa9a0a00c3c +Author: Eric Anholt +Date: Tue Mar 6 12:23:43 2007 -0800 + + Continue to allocate the legacy texture pool by default. + + This is a partial revert of 7358642e64ab6d13bc1dc1a44703ee66d715ff61 + + If we don't allocate it now, when the DRM version is too low there won't be any + memory allocated and DRI will fail. Instead, waste the memory in the i915tex + case for now, and leave fixing it right (check DRM version up front and decide + which memory manager to set up) to later. + +commit e972265261c421268e4fb806e587378d0adec577 +Author: Michel Dänzer +Date: Tue Mar 6 16:54:16 2007 +0100 + + Fix build failure. + + Not sure how I missed this before... Thanks to Todd Merrill for reporting. + +commit 862088ba6a91d3e7cf8d37126b1d9f4ee03a1f73 +Merge: 11e9158 d717d9d +Author: Nian Wu +Date: Tue Mar 6 07:43:16 2007 -0500 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 1e1b45fa6ed1683cba4ae73ac98933e74c3ab9d6 +Author: Michel Dänzer +Date: Tue Mar 6 10:28:41 2007 +0100 + + Fix reduced DRI memory manager size. + + pI830->mmSize is in kB. + +commit 3c08bc7d6974a1a6cf5f9cb81898617032966c52 +Author: Michel Dänzer +Date: Tue Mar 6 10:14:47 2007 +0100 + + Fix some conditionals related to triple buffering. + + Guard code that dereferences pI830->third_buffer with tests for that instead of + pI830->TripleBuffer. It could happen that we want to enable triple buffering + but (temporarily) can't because the third buffer couldn't be allocated. + +commit c25cfafbe1eb380b58b5fc16e94f5cc6f422f0cd +Author: Michel Dänzer +Date: Tue Mar 6 10:00:12 2007 +0100 + + Unify allocation of back buffers. + +commit e787d7b698d320a7c45df35d58c5113413561fe2 +Author: Michel Dänzer +Date: Tue Mar 6 09:35:42 2007 +0100 + + Remove warnings about potential artifacts with page flipping and mixed 2D/3D. + + The artifacts only seemed to occur when EXA was falling back to software for + the front buffer. + +commit 6c299aea8e87e72c68c96c03594706c976601ede +Merge: 3308152 4042b27 +Author: Michel Dänzer +Date: Tue Mar 6 09:28:52 2007 +0100 + + Merge remote branch 'origin/master' into i830-pageflip + + Conflicts: + + src/i830_display.c + src/i830_driver.c + +commit 4042b27f01fdb94e7fc0d4e991e054fff88479ea +Author: Keith Packard +Date: Mon Mar 5 22:32:52 2007 -0800 + + Move EnterVT mode setting code to xf86SetDesiredModes. + + Make the application of crtc desiredModes generic code instead of + per-driver by creating xf86SetDesiredModes from the code that was in EnterVT + and calling it. + + Also, move the frame buffer clear until just before mode setting to make + sure things are mapped correctly. + +commit 55ee46aebbf1ec1a8ce914fbd0c8894fc857db8f +Merge: 5c72014 50aa094 +Author: Wang Zhenyu +Date: Tue Mar 6 12:45:08 2007 +0800 + + Merge branch 'master' of git://proxy.ims.intel.com:9419/git/xorg/driver/xf86-video-intel + +commit 5c720147e2b86ca4046b7c3812c1ca6b0fb78c9d +Author: Wang Zhenyu +Date: Tue Mar 6 12:44:04 2007 +0800 + + EXA: try to always alloc exa i965 state buffer in stolen mem + + I think this is a safe way to work around any possible chip + error. + +commit 11e91586169b4f4bf2b41c0e0e620a69670c2f07 +Merge: a24962a 0150270 +Author: Nian Wu +Date: Mon Mar 5 16:00:20 2007 -0500 + + Merge git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit a24962af9ed39fabca0152cae1265a29fe6237d3 +Merge: 35e9310 8bb6778 +Author: Nian Wu +Date: Mon Mar 5 16:00:11 2007 -0500 + + Merge branch 'crestline' of git://otc-graphics.jf.intel.com/git/xorg/driver/xf86-video-intel into crestline + +commit 50aa09425f54c4eeca7f8b0fae9579209b10b9c4 +Merge: d717d9d c2c6255 +Author: Keith Packard +Date: Mon Mar 5 11:28:46 2007 -0800 + + Merge branch 'modesetting' + +commit c2c62559e702e7de1fa2ef309fa647ab13564dc3 +Author: Keith Packard +Date: Sat Mar 3 23:12:54 2007 -0800 + + Move single mode setting code to X server. + + Code to drive the global configuration from a single mode setting operation + (from RandR 1.1, XFree86-VidModeExtension or XFree86-DGA) has been included + in the X server now, so remove it from this driver. + +commit 35e9310ef59873877422dcaf9a65b38789fc8ad6 +Merge: c8e6f0b b27fa2c +Author: Nian Wu +Date: Mon Mar 5 09:01:55 2007 -0500 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 8bb677889d3f71cde671f17a3589939acad2c3b3 +Author: Eric Anholt +Date: Mon Mar 5 05:08:51 2007 -0800 + + Fix 965GM SDVO by not setting fields in SDVO[BC] which have new meanings. + +commit 330815251dee808754b328cd2fd60db39f2460eb +Merge: 50ba1ff 0150270 +Author: Michel Dänzer +Date: Mon Mar 5 13:05:20 2007 +0100 + + Merge remote branch 'origin/master' into i830-pageflip + + Conflicts: + + src/i830.h + src/i830_dri.c + src/i830_dri.h + src/i830_driver.c + src/i830_memory.c + src/i830_xaa.c + +commit d717d9d566fe3c0866b06840114e1c1990bd7be0 +Author: Michel Dänzer +Date: Mon Mar 5 12:57:21 2007 +0100 + + Fix DRM memory manager initialization. + + It takes the offset and size in pages, not bytes. + +commit a0c83af3430b6705ab2ecae59085d1c74e890c19 +Merge: c0f99b4 bc20b54 +Author: Eric Anholt +Date: Mon Mar 5 03:37:53 2007 -0800 + + Merge branch 'modesetting' into crestline + +commit 7358642e64ab6d13bc1dc1a44703ee66d715ff61 +Author: Michel Dänzer +Date: Mon Mar 5 11:53:09 2007 +0100 + + Fix handling of new vs. old texture pools. + + Only one of them can be active. + +commit 50ba1fff886a7f51b178ac6d3a1ba79a3014b214 +Author: Michel Dänzer +Date: Mon Mar 5 10:22:07 2007 +0100 + + Be more verbose when page flipping can't be enabled for various reasons. + +commit 015027034e970f1e3bb6ab239f7e0119235e404f +Merge: 9a51064 bc20b54 +Author: Eric Anholt +Date: Sun Mar 4 21:49:00 2007 -0800 + + Merge branch 'modesetting' + + Conflicts: + + configure.ac + src/i830_driver.c + src/i830_modes.c + src/i830_video.c + +commit af565872a49a1a464ee4154c27136660b184c4c1 +Author: Keith Packard +Date: Sun Mar 4 21:20:33 2007 -0800 + + Set version number to 2.0 RC1 (1.9.91). + +commit bc20b54c34088356a277beaebcc90bb4a7063e19 +Author: Keith Packard +Date: Sun Mar 4 19:35:44 2007 -0800 + + Support new CRTC/Output prepare/commit hooks. + + New hooks replace explicit invocation of DPMS functions to manage mode + setting sequencing. + +commit b27fa2c257ccc49c6f29a20a3e672ebaaf58e7aa +Author: Eric Anholt +Date: Sun Mar 4 17:15:45 2007 -0800 + + Fix a crash with XAA and DRI disabled after the allocation rework. + +commit fc7d43c2b6b98be597152fbd88024273edd931d0 +Author: Eric Anholt +Date: Sun Mar 4 17:14:30 2007 -0800 + + Use -f for ln of server source. Otherwise, changing paths didn't take effect. + +commit b7b6063e62927dd135e118c433f48b4d0b5fe246 +Author: Eric Anholt +Date: Sun Mar 4 15:53:50 2007 -0800 + + Add a little BIOS dumper program. + + This isn't actually tested yet as libpciaccess doesn't do rom access on + non-linux yet. + +commit 6aeb855b9d4e03d458773240a9c0c9c1edd3e403 +Author: Keith Packard +Date: Sun Mar 4 17:11:40 2007 -0800 + + Shadow pixmaps use fixed offset of 0. + + Shadow pixmap contents are copied from the main frame buffer and contain + only the bits displayed by the crtc, not the whole frame buffer. The crtc + origin is always interpreted by the shadow copying code, the frame buffer + itself doesn't move. + +commit c8e6f0bac13e0e407f9771b1bbf126f023c1511b +Merge: 0ed5a2f c0f99b4 +Author: Nian Wu +Date: Sun Mar 4 09:00:12 2007 -0500 + + Merge branch 'crestline' of git://otc-graphics.jf.intel.com/git/xorg/driver/xf86-video-intel into crestline + +commit 7d08f720a95499e8d00dcd7174f06731de420017 +Merge: dd24d2a 435d355 +Author: Keith Packard +Date: Sat Mar 3 23:13:03 2007 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 435d35558d8135a2c1724dfd813fb4a9a4e14178 +Author: Keith Packard +Date: Sat Mar 3 22:46:31 2007 -0800 + + Update for Aaron's xserver changes. + + Add xf86CrtcConfigFuncs to xf86CrtcConfigInit + Add canGrow option to xf86InitialConfiguration + +commit c0f99b4962553e560a5cb882a5060d95db5477a4 +Author: Keith Packard +Date: Sat Mar 3 22:36:46 2007 -0800 + + LVDS dither control moved from PFIT to LVDS register for Crestline + + The LVDS register now contains lots of new controls for dual-channel LVDS control + along with dither enabling. The PFIT register has a lot fewer controls as a result. + +commit 0fa3d4f51b5ee0dba3882fd74b6ac4e7da708f8f +Merge: 10655c4 fd52d63 +Author: Keith Packard +Date: Sat Mar 3 21:02:17 2007 -0800 + + Merge branch 'modesetting' into crestline + +commit 0ed5a2fdcfe9674175aa9af155c20695ef41cadc +Merge: 7ba80cc fd52d63 +Author: Nian Wu +Date: Sat Mar 3 09:00:20 2007 -0500 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit fd52d635603b7093c5a2b7fa9c987cf59f9be27c +Author: Eric Anholt +Date: Fri Mar 2 13:44:57 2007 -0800 + + Add a WIP UploadToScreen implementation. This almost displays right. + +commit ca0fa875e8bb5cb778d4db7d8053ec0a5ae34ef4 +Author: Eric Anholt +Date: Fri Mar 2 11:46:45 2007 -0800 + + Move EXA offscreen memory back after framebuffer to avoid fallbacks. + + Without this, the EXA code decides that the framebuffer is not in video + memory because it's not located between the start of video memory and the end + of EXA allocator memory. We should either have EXA let the driver decide if a + pointer is in video memory, or add a new field for "end of video memory" (not + just end of EXA offscreen allocation), but this fixes things for now. + +commit 5a73624b9bcce0004e5b72c74667c9dd504b9c3e +Author: Eric Anholt +Date: Fri Mar 2 11:03:16 2007 -0800 + + Fix a crash when an ARGB cursor allocation had failed. + +commit 7ba80cc3a5e0f469e3ee55c7537fdc952cd85911 +Merge: 9796cb7 d5df52b +Author: Nian Wu +Date: Fri Mar 2 09:01:46 2007 -0500 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit d5df52be59a7dd950e73336ce5698e73480108b0 +Author: Eric Anholt +Date: Thu Mar 1 08:35:13 2007 -0800 + + Actually add the files for reg_dumper. + +commit 9796cb7ac4bd74d5336986bb194ff5875b028121 +Merge: 42deb1e 1f5d166 +Author: Nian Wu +Date: Thu Mar 1 09:02:22 2007 -0500 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 1f5d1666c8386ca4597c6f2c1ec239f9d821da4c +Author: Eric Anholt +Date: Wed Feb 28 16:27:55 2007 -0800 + + Add a non-installed command line tool using libpciaccess to dump registers. + + This reuses the i830_debug.c code, so we can run that from the console or from + the BIOS-based X server to debug some remaining issues. + +commit cd1d4b398ec91d551bdaaa26c769e5e6a9442df1 +Author: Eric Anholt +Date: Wed Feb 28 09:47:38 2007 -0800 + + Many fixes to mode_get, mode_set, clock limits, and register dumps on i855. + + This should fix a number of issues with i855s, particularly with integrated + LVDS panels. + +commit 36cad3fcb65e3dcd88e58e301cd60adb121cb96b +Author: Michel Dänzer +Date: Wed Feb 28 17:52:42 2007 +0100 + + Update vblank pipe setup when setting a mode. + +commit b5316fb2623e9630cbd58020e0a7c95bf354c587 +Author: Michel Dänzer +Date: Wed Feb 28 17:50:56 2007 +0100 + + I830DRIClipNotify: Fix initialization of crtcBox[1].[xy]2. + +commit 42deb1e10fc445d152b74e2b225daeaee2abb3d1 +Merge: 76aac38 3e8e75e +Author: Nian Wu +Date: Wed Feb 28 09:00:24 2007 -0500 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 76aac382659bc1dab7dca078f703b9cf48b4ad74 +Merge: 42fc06c 1ac83f5 +Author: Nian Wu +Date: Tue Feb 27 14:42:42 2007 -0500 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 3e8e75e5d83a2fa7e9fc6e9a3fbb07dac548ea5a +Author: Wang Zhenyu +Date: Tue Feb 27 16:48:48 2007 +0800 + + Revert "EXA: enlarge 965 exa state buffer size" + + This reverts commit 1ac83f51ee46d65237eae1b5c767e106ac9e29bc. + oops, current exa state + kernel program size + scratch space + is actually ~36KB. + +commit 1ac83f51ee46d65237eae1b5c767e106ac9e29bc +Author: Wang Zhenyu +Date: Tue Feb 27 13:58:47 2007 +0800 + + EXA: enlarge 965 exa state buffer size + + Origin size seems break all render, be sure to assign enough + mem. 80k works fine for me. + +commit acd9f3e28fcf5e91e09d8bdca4cc58681b1fc92a +Author: Wang Zhenyu +Date: Tue Feb 27 13:56:31 2007 +0800 + + Fix typo when assign overlay reg mem pointer + +commit 5b765065c0bdf671b60d8a2fe512f6307f753eab +Author: Eric Anholt +Date: Mon Feb 26 17:25:57 2007 -0800 + + Consolidate shared structure allocation to the start of ScreenInit. + + Previously, the structures would get allocated unnecessarily once, and + wouldn't get reallocated in time at server regen. + +commit 6ed28c5aa34ff1d8b99a8d4721ddac7b9cac41ed +Author: Eric Anholt +Date: Mon Feb 26 17:12:44 2007 -0800 + + Fix XV issues on 965 after the allocation rework + +commit 36bfeb890aeb17a8ee058790dd69b4e9aba644a1 +Author: Eric Anholt +Date: Mon Feb 26 16:58:33 2007 -0800 + + Move the initial EnterVT to after we've set up acceleration. + + This fixes a crash with initial rotation and EXA due to EXA not being + initialized in time for the shadow pixmap setup. + +commit 732885c08daaf17034da8f4855d0b957ec3df9d7 +Author: Eric Anholt +Date: Mon Feb 26 15:04:56 2007 -0800 + + Bug #9604: Align the sizes of allocations to page increments as well. + + Without this, the 965 DRI driver fell over when pitch * height wasn't + page-size aligned. Since the allocator only allocates at page-aligned offsets + anyway this shouldn't hurt us at all. + +commit 0bfaeaab2838184827236c5c0fcc17f06d9e1372 +Author: Eric Anholt +Date: Mon Feb 26 11:11:56 2007 -0800 + + Fix physical memory allocations, including description in log. + +commit 5732dd7221b7bb24bf21e16066f014a0c7cb6b2a +Author: Eric Anholt +Date: Mon Feb 26 09:54:04 2007 -0800 + + Fix some texture memory allocation issues. + +commit aeeae1b40fc012bcc01fcd2243d4993de819b7cf +Author: Eric Anholt +Date: Mon Feb 26 09:13:17 2007 -0800 + + Fix a crash in startup monitor detect. + +commit 10655c4674cdac8a231c50dd9afc5d43fe43b4bd +Author: Zou Nan hai +Date: Mon Feb 26 09:23:14 2007 +0800 + + for merge with external tree + +commit 9417af8630fce0476273b693ebac12129415e0cf +Author: Zou Nan hai +Date: Mon Feb 26 08:02:50 2007 +0800 + + fix conflict with external branch + +commit 42fc06c85a0c487cfa26b9d4aa396402dbc4c2fe +Merge: 10655c4 3bce8bf +Author: Nian Wu +Date: Sun Feb 25 12:53:47 2007 -0800 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 84a7429730ddd29072d696accb9fdd8fea40731a +Author: Eric Anholt +Date: Fri Feb 23 14:59:24 2007 -0800 + + Always allocate logical_context, since we use it in emitting invariants. + +commit 7bb725dee9ef0ccdc478ed4931dc267bcb80203f +Author: Eric Anholt +Date: Fri Feb 23 14:56:58 2007 -0800 + + Improve logging of memory allocation passes, and clean the code up a bit. + +commit 54198b26e87baa180208932b97f10b27d9c0fddc +Author: Eric Anholt +Date: Fri Feb 23 14:17:07 2007 -0800 + + Move memory allocation to ScreenInit rather than PreInit. + + This lets us do memory allocation just once rather than having several passes + (as long as things succeed), avoids trouble with zaphod mode, and will let us + do better automatic sizing of allocations soon. + +commit 828deff6453872ef0f9fa35c08c9f95f464b1785 +Author: Eric Anholt +Date: Fri Feb 23 13:16:02 2007 -0800 + + Fix fence allocations on 965. + +commit d3ac440e127c8a7716062852cd3b5e7943e289e4 +Author: Eric Anholt +Date: Thu Feb 22 10:41:09 2007 -0800 + + Rework the video memory allocation. + + The previous allocator worked in multiple passes, with (at least) one of + setting up allocations, another to attempt to adjust those for tiling, and + then a pass to set up the offsets and fix them in memory. + + The new allocator is simpler, allocating memory immediately if possible, + setting up tiling up front, and choosing offsets immediately. AGP memory + is only allocated to back actual memory used, saving some memory that would + have been allocated for padding previous. It will also allow dynamic freeing + and reallocation of memory, which will be useful for framebuffer resizing. + +commit a61a6b1db610a07060d0dcca54b66a4b2b3686cc +Author: Eric Anholt +Date: Wed Feb 21 09:43:24 2007 -0800 + + Reformat to 4-space indents, no trailing whitespace, and 80 columns. + + I'm in the process of rewriting this file, and wanted to separate my whitespace + changes. + +commit dd24d2a082b41abc466391c37a9b3d066586dc55 +Author: Keith Packard +Date: Thu Feb 22 11:46:44 2007 -0800 + + Remove copied X server headers from driver. + + These two headers were copied during mode setting development; as that code + is now inside the server, these files are no longer needed here. + +commit 681966ce6548c6f47b087eb7e369674b7ddbaade +Author: Keith Packard +Date: Thu Feb 22 11:45:43 2007 -0800 + + Disable unused functions after configuring the remaining resources. + + This eliminates an unsightly flash of the hardware cursor during X server + startup. + +commit f5ab9e0ad3a65c972861dd53be6e33e1aac13191 +Author: Michel Dänzer +Date: Thu Feb 22 18:57:23 2007 +0100 + + I830DRISwapContext: Some cleanups. + + Also call I830EmitFlush() when entering/leaving the server context. Doesn't + seem to help for artifacts with page flipping and mixed 2D/3D unfortunately. + +commit 8cce74f195e5ef6ce5599ecd52f35bcfcb0d7913 +Author: Michel Dänzer +Date: Thu Feb 22 18:27:59 2007 +0100 + + Do not sync DRI windows between pages when possible. + +commit f346549183a407a4bff6521ec2450dacb97442e9 +Author: Michel Dänzer +Date: Wed Feb 21 09:19:54 2007 +0100 + + intel.man: Fix typo. + +commit 3bce8bf0e95e5842399959a5d6f6413e96f03adb +Author: Keith Packard +Date: Tue Feb 20 23:10:17 2007 -0800 + + Pre-965 hardware had fixed pipe 1 for panel fitter. + + The pipe mode setting code needs to disable the panel fitter when using the + pipe for things other than LVDS output. The driver was checking for panel + fitter conflicts using bits that the 965 chipset defines for selecting which + pipe the panel fitter is connected to. However, on pre-965 hardware, the + panel fitter works only with pipe 1 and those bits returned 0. + + The result was that when pipe 1 was using the panel fitter, configuring pipe + 0 would disable the panel fitter. + + The fix provided uses a model-specific test for the panel fitter pipe. + +commit 0bee64f4bc7581de7ab28ca438581d215e85c610 +Author: Michel Dänzer +Date: Tue Feb 20 19:09:37 2007 +0100 + + Add support for triple buffering using a third static buffer. + + Need to bump the DRI DDX version minor for the added SAREA fields. + +commit 2212baa8454abb4c7948c3f2e20e337f831d1b86 +Author: Michel Dänzer +Date: Tue Feb 20 18:39:13 2007 +0100 + + Don't mark page flipping as active when it really isn't. + +commit fac8f2eb49de22abd853ca75f3c985d4d94e3633 +Author: Michel Dänzer +Date: Tue Feb 20 18:38:40 2007 +0100 + + Document Option "PageFlip". + +commit 5a1a04649c62aa4b1c0617560b813642ce0c67b5 +Author: Keith Packard +Date: Sat Feb 17 17:01:04 2007 -0800 + + Make distcheck fixes. Distribute all sources needed even for older servers. + + Always allow (but do not require) link to server sources so that needed + files can be included in the generated tar files. + + Add remaining .g4a files and assembly output to distributed file lists. + +commit 0ca926e63c7fa9122a8cba1424ce4cdee1c7b215 +Author: Keith Packard +Date: Fri Feb 16 02:19:10 2007 -0800 + + Check for presence of xf86Modes.h file. + + xf86Modes.h file signals the availability of the new modes API in the + server; use that instead of counting on X server version numbers. + Also, finish eliminating use of local copies of those header files. + +commit 972f1109d23c0a3f821fa573e2aa40cd17ce2795 +Author: Keith Packard +Date: Fri Feb 16 01:07:20 2007 -0800 + + Remove common code that has moved to xserver/hw/xfree86/modes + +commit 20e146a09e3b4907a6800588ebfa787bfc5b0d89 +Author: Keith Packard +Date: Fri Feb 16 00:57:44 2007 -0800 + + Change rotation pixmap creation API to permit start-time rotation. + + Start time rotation requires that the pixmap be created after the server has + initialized the screens. Delay the pixmap creation until the first block + handler invocation. + +commit 17e38e39a49b2a96e31cca4a0b922631c5f7879e +Author: Keith Packard +Date: Thu Feb 15 23:09:43 2007 -0800 + + Enable mode setting function renames from shared code. + +commit 8e7bc4b1f95f5d62ff18cd94f14f5e3949ef6a29 +Author: Keith Packard +Date: Thu Feb 15 11:17:53 2007 -0800 + + Use server sources for crtc/output generic code. + + As sources for these have been merged to the server, use them from the + server source code instead of keeping copies in this driver. + +commit 6e33c4c44030e05d6d07ca9274cfe4d6df2c0387 +Author: Eric Anholt +Date: Thu Feb 15 09:54:43 2007 -0800 + + Print the correct meaning of bit 30 of pipeconf for 965 in debug output. + +commit 4541150cdce3f2f83b8530d0863aecf28c6610a9 +Author: Eric Anholt +Date: Thu Feb 15 09:51:04 2007 -0800 + + Detect core clock frequencies, to avoid double-wide mode when possible. + + Additionally, don't attempt to set double-wide on the 965, where there is + no such thing any more (not that we'd ever see modes high enough to trigger + it). + +commit d1be0dc4e9d443dcbd218a083cfb21a0b5d634ee +Author: Wang Zhenyu +Date: Thu Feb 15 11:03:12 2007 +0800 + + EXA: fix i965 default color (0,0,0,1.0) -> (0,0,0,0) + + (0,0,0,1.0) is actually black... + +commit c010d28f0a91a9831d366ea490878ef3d958021f +Author: Wang Zhenyu +Date: Thu Feb 15 11:00:06 2007 +0800 + + EXA: mask componentAlpha support + + we're getting load of multiple sf/wm programs for i965, might + need to be cleanup in future. + +commit ec55dd16c4c5f7612d33ae22a6249b3b1c60e2b6 +Author: Keith Packard +Date: Wed Feb 14 14:37:02 2007 -0800 + + Global namespace cleanups, filename fixes. + + Ensure all xf86 symbols created here are protected with XF86NAME. + Remove accidentally exported symbols from namespace. + Make all to-be-DI files prefixed with i830_xf86. + +commit 22a271555a46267c40448fa926d45692498ef7c6 +Author: Keith Packard +Date: Wed Feb 14 14:17:14 2007 -0800 + + Create driver-independent DGA hooks, remove i830 DGA code. + + As RandR needs to poke at DGA code, and we want the RandR code to be + driver-independent, it seemed easier to just make the DGA code + driver-independent as well. + +commit a7c64d5e28f608d54c94fa7a5c92bd5b471179c7 +Author: root +Date: Wed Feb 14 10:20:28 2007 -0800 + + WIP DGA generic support. + +commit 55c7b017ed718107b9b11467030addf225728b84 +Author: Michel Dänzer +Date: Wed Feb 14 16:45:22 2007 +0100 + + Use new DRI ClipNotify hook to track page flipping per CRTC when available. + +commit 3bd8edb95fcbbb49e97a1a2bdd5c8eae4f83d3a8 +Author: Michel Dänzer +Date: Fri Feb 2 17:41:18 2007 +0100 + + Revive i830 page flipping support. + + Use the damage layer directly instead of via shadowfb. + +commit 1d22bad33b634aaf61976907cb2ceeec8a9ebe4d +Author: Michel Dänzer +Date: Wed Feb 14 12:57:12 2007 +0100 + + Update SAREA pipe fields in i830PipeSetBase. + +commit 0df490938af10d3a748221e2fb5467b0f244f9eb +Author: Michel Dänzer +Date: Thu Dec 21 11:27:28 2006 +0100 + + If the DRM can handle it, enable vertical blank interrupts for both pipes. + +commit 1623b47c4863f5362587cdac855e3e11c109b007 +Author: Eric Anholt +Date: Tue Feb 13 17:37:56 2007 -0800 + + Switch the RECTLIST vertex order to (x2, y2), (x1, y2), (x1, y1). + + This is the documented correct ordering, and while the previous ordering + (reversed) worked on some hardware, it failed on others. + + Reported by: Wang Zhenyu + +commit 4bd4058dfdca84d6ebab82a1dfba99adf3852c9c +Author: Eric Anholt +Date: Tue Feb 13 14:29:52 2007 -0800 + + Bug #9941: ViewSonic VX2025wm sync polarity quirk to fix mode distortion. + +commit 0ec4ffcb4e8e5e707e68bef1b13a324677f19f8f +Author: Eric Anholt +Date: Tue Feb 13 13:18:15 2007 -0800 + + Fix double free in the case of LVDS disabled through quirks. + +commit 699fa88d2570de6173e2d866e11b7437f4842d74 +Merge: 681b919 6641aec +Author: Eric Anholt +Date: Tue Feb 13 13:10:08 2007 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 6641aec0a1cbc869fba1956c556cdd204631545a +Author: Eric Anholt +Date: Tue Feb 13 10:21:12 2007 -0800 + + Attempt to detect panel fixed mode from EDID or current programmed mode. + + These two sources are placed in higher priority to the BIOS data when + available, since the BIOS data has proven unreliable. The BIOS data is still + read, and warnings printed if it doesn't match what we probe. The BIOS data + remains useful for the situation where we want to turn on LVDS but there is no + EDID available and no current mode programmed (i.e. booting with VGA or TV + connected). + +commit 991439d4c78cf5b2a8f6bb8f5b36fffbfcc4e4fc +Author: Eric Anholt +Date: Tue Feb 13 10:07:47 2007 -0800 + + Remove dead #if 0-ed structure. + +commit c3aed56d46baba057d83dc6ea12c6b4e705e54ba +Author: Eric Anholt +Date: Fri Feb 9 13:16:37 2007 -0800 + + Fix comments on 965 pitch alignment restrictions. + +commit 98318dfcc99264fb7b7ef34568712812aa6300b6 +Author: Daniel Stone +Date: Fri Feb 9 16:20:57 2007 +0200 + + add missing files to fix distcheck + A bunch of files were missing from _SOURCES, and the build was also broken + for missing files (from EXTRA_DIST) when building without gen4asm. + +commit fce4390c4f1a76c65423114bb479814787612cd7 +Author: Zou Nan hai +Date: Fri Feb 9 11:32:22 2007 +0800 + + TV Enable + +commit 00dadaa115951c36de9caf2a9d78909811ef34bc +Author: Zou Nan hai +Date: Fri Feb 9 11:14:50 2007 +0800 + + set DPLL before detect + +commit 10712c7a781e50475ee7e8ccd5bfd2d820f863e2 +Author: Wang Zhenyu +Date: Thu Feb 8 08:56:42 2007 +0800 + + EXA: i965 pixmap pitch align + + This seems like a typo, which causes screen artifacts. + +commit 44eacf2323454e26b535cc5a4f0789cb0ff0e7fb +Author: Wang Zhenyu +Date: Wed Feb 7 17:30:51 2007 +0800 + + EXA: fix render issue with i965 + + Fix SF kernel with corrent coeffient work, and correct + VUE storage in multi texture case. + +commit 920aeaf8478f706ab3b1de4f20f5d351e64a0197 +Author: Zou Nan hai +Date: Wed Feb 7 13:15:52 2007 +0800 + + Make TV code same with external tree. + Fallback to old filter table. + 4 spaces indent reformat. + Auto scaling seem to not work well on some low res interlace mode when input width > 1024, filter those modes. + Fix some subcarriar number + +commit 6d9757e466863594300c83f3806fd4376bea0504 +Author: Zou Nanhai +Date: Mon Feb 5 14:59:53 2007 +0800 + + Fix hang when TV is not connect. + +commit 681b91924c364a1c00732f548539f2767929ba0e +Author: Eric Anholt +Date: Fri Feb 2 17:40:34 2007 -0800 + + Add subpixel offsets to fix accelerated rotated rendering on i915. + + This fixes the rendercheck "transformed src/mask coords 2" tests. Previously, + the source pixels chosen would be off by one in some cases. + + The particular values were taken from Mesa, which uses .125 offsets (except + apparently broken for y), but the signs are changed. I would be happier if + I had better justification for why this worked. + +commit 76a4f2eea826036e2ac16b7e8c61ab946038c120 +Author: Eric Anholt +Date: Fri Feb 2 17:34:41 2007 -0800 + + Fix bad offsets in "right" rotation of the CRTC in cursor and update handling. + +commit 785a59ead0e8d1d681b2cb6827ee58ad2c51f8c6 +Author: Keith Packard +Date: Thu Feb 1 22:48:44 2007 -0800 + + Rename driver from i810 to intel. Permit old name for compatibility. + + Driver installs as intel_drv.so with symlink to i810_drv.so to ensure + existing configurations continue to work. Updated manual page to reflect + name change and add attributions for recent work. + +commit 1dde7a15a3a42b881c57ece95feceffadf412cff +Merge: 16f30b2 1ba45a3 +Author: Keith Packard +Date: Thu Feb 1 21:31:27 2007 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 16f30b2e6c72e228c66946ff9efadd7278379745 +Author: Keith Packard +Date: Thu Feb 1 21:30:19 2007 -0800 + + Add "Ignore" option to per-output monitor, removes output from server. + + Setting option "Ignore" "Yes" will cause the server to pretend as if the + specified output does not exist at all. It will not be listed by the + RandR1.2 extension, and the server will not attempt to detect monitors at + startup time. + +commit b3633506dcd4fd58f0f9519cd67f6e75d6fb2042 +Author: Wang Zhenyu +Date: Fri Feb 2 11:35:44 2007 +0800 + + Add Intel 965GM chipset support + +commit 380129a17c61c783d77a87685ad5333e8b1c253c +Author: Wang Zhenyu +Date: Fri Feb 2 11:33:46 2007 +0800 + + Revert original crestline pci id patch + +commit f7489bbec150349bf03bea8d9d55451dbc92bfc2 +Merge: f1285ec ae6d358 +Author: Wang Zhenyu +Date: Fri Feb 2 11:26:57 2007 +0800 + + Merge branch 'modesetting' into crestline + + Conflicts: + + src/i830_display.c + src/i830_tv.c + src/i830_xf86Crtc.c + +commit ae6d3585a4d96aa4dc05ca8563cebfa7796324ef +Merge: 6d549ed 1ba45a3 +Author: Wang Zhenyu +Date: Fri Feb 2 11:21:59 2007 +0800 + + Merge branch 'modesetting' of git://proxy.ims.intel.com:9419/git/xorg/driver/xf86-video-intel into modesetting + +commit 9f0acf1eb01ad8320f4da4cc5e498af25c0ecc5e +Author: Keith Packard +Date: Thu Feb 1 15:44:18 2007 -0800 + + Check for rotation change in xf86RandR12CrtcSet. + + xf86RandRCrtcSet was ignoring changes to only rotation, so the screen would + be left incorrectly rotated. + +commit 1ba45a3fcd40aaf4d373447fb9f252ca053f9105 +Author: Eric Anholt +Date: Thu Feb 1 13:26:38 2007 -0800 + + Improve register debugging output. + + This includes not reporting some fields on hardware where those bits are + reserved, correcting one of the hardware error bit numbers, and reducing + the severity of the debugging output warnings. + +commit 9bfeadbd5b37acb56cb646009239a94727ec52bc +Author: Eric Anholt +Date: Thu Feb 1 12:04:58 2007 -0800 + + Remove some more dead options. + +commit d6bc03c379c46842676f640b8edb13ea828bf20c +Author: Eric Anholt +Date: Thu Feb 1 11:28:34 2007 -0800 + + Bug #9819: Add two headers that are apparently necessary on older X Servers. + +commit 351866b0328b1d7afdc6b414c77d9ab4da4bd085 +Author: Eric Anholt +Date: Wed Jan 31 15:48:52 2007 -0800 + + Sync before overwriting Render acceleration state on the 965. + +commit 96783a458957ca280ebb6275fa692dd415df6931 +Author: Eric Anholt +Date: Wed Jan 31 15:48:02 2007 -0800 + + Fix copy-and-paste-o in the render code cleanup that broke XAA. + +commit 5238ff9c80718f9f8baa06123aa1bb6e3193fce6 +Author: Eric Anholt +Date: Wed Jan 31 14:01:41 2007 -0800 + + Naming and formatting cleanup in Render acceleration code. + +commit c47210d94ed17ad9e8e489a1e1886732e6dc7220 +Author: Eric Anholt +Date: Wed Jan 31 12:50:31 2007 -0800 + + Move the render code to non-EXA-specific filenames. + +commit 72ea0e514dcbebd009833c21f40e9bfb84074628 +Author: Eric Anholt +Date: Wed Jan 31 12:43:38 2007 -0800 + + Remove custom accelerated rotation code now that it's all done through Render. + +commit e62751db8b1a631c22ba0f77c932be4ab39ba741 +Author: Eric Anholt +Date: Wed Jan 31 12:15:38 2007 -0800 + + Add an accelerated path for rotation Render operations in XAA. + + The now-generic (kind of) EXA code will be cleaned up and moved to generic + files in a later commit. + +commit f1285ecb72e807ac10db398fa983bf69d4154d97 +Author: Zou Nan hai +Date: Wed Jan 31 14:58:08 2007 +0800 + + tune + +commit 0620a7650f758652d05a0c25d159587f641aaf3e +Author: Zou Nan hai +Date: Wed Jan 31 11:21:11 2007 +0800 + + fix + +commit 12441e217a1968dea3a6b0646b6c5d0e2ede0e7e +Author: Zou Nan hai +Date: Wed Jan 31 11:20:23 2007 +0800 + + add 720p@50Hz, + however 720p in this freq seems to not support src width, + hactive > 800, so skip those inputs. + +commit 726c7dd89627409820ee5cf9bf657d5a926b3648 +Author: Zou Nan hai +Date: Wed Jan 31 10:34:39 2007 +0800 + + TV fixes. + +commit 4cd552e8f4851e029e43bf778cd8340f6c2c4881 +Author: Eric Anholt +Date: Tue Jan 30 16:34:50 2007 -0800 + + Fix accelerated Render transformations. + + Previously, we tried to use 2 points instead of 3 to describe the source + rectangles, which mostly just worked for scaling. + +commit 6a628ae12b0568d656059891c5bca4415d8a735f +Author: Eric Anholt +Date: Tue Jan 30 14:19:05 2007 -0800 + + Simplify EXA acceleration transform handling. + +commit c8581254cb811f76aa6eae49d74489b543b3eb05 +Merge: 9da1791 d329fa1 +Author: Keith Packard +Date: Mon Jan 29 21:25:13 2007 -0800 + + Merge branch 'modesetting-rotation' into modesetting + + This adds reasonably driver-independent rotation support to the common + layer. The piece required in the driver is to allocate and redirect the crtc + to a shadow frame buffer. The driver uses Render to perform the actual + rotation operation (which leaves us free to do fun projective transforms at + some point in the future :-). + +commit 9da1791eeca446cd59e2e7d0803e8a7920dbbea5 +Author: Eric Anholt +Date: Mon Jan 29 17:10:14 2007 -0800 + + Restore a few important lines from 89ace3e81fe72075b1709b073c05532f13b7f0d1 + + Typical results were failure to sync, and a black screen. + +commit 67c6a490e63f6997f8198bc3ab180a1af097fe86 +Author: Eric Anholt +Date: Mon Jan 29 09:53:58 2007 -0800 + + Remove dead code to undo the damage of xf86SetModeCrtc() blank limiting. + +commit 89ace3e81fe72075b1709b073c05532f13b7f0d1 +Author: Eric Anholt +Date: Mon Jan 29 09:43:35 2007 -0800 + + Bug #9680: Remove bogus blank length limiting in xf86SetModeCrtc(). + + Our modes typically come from EDID or default modes, and when the monitor + asks for a specific mode, deciding to tweak it usually results in incorrect + display. And if the user is specifying a mode by hand, tweaking it then is + still pretty rude. + + Reviewed by: ajax + +commit 6eb69e737864d06dc6d4fbb4cd85a027cbb7643a +Author: Dave Airlie +Date: Sun Jan 28 19:40:12 2007 +1100 + + ch7xxx: actually power up the chip around connection detection + +commit d329fa121b2401cadb991c2854e077cfa68e15e8 +Author: Keith Packard +Date: Sat Jan 27 18:36:15 2007 -0800 + + Fetch from root window instead of screen pixmap during rotation. + + The XAA Composite wrapper doesn't check for sourcing from the root pixmap + when deciding whether to sync the hardware drawing. Fix the rotation code to + reference the root window in IncludeInferiors mode to avoid reading without + correct synchronization. + +commit 20419d664c77e9a1a2de82987838b45f44774b47 +Author: Keith Packard +Date: Sat Jan 27 18:34:12 2007 -0800 + + Paint ARGB cursor data to ARGB cursor memory space in frame buffer. + + When converting from global cursor to per-crtc cursor, the ARGB cursor data + was accidentally painted to the wrong location, overwriting some critical + data and causing the hardware to lock up. (along with generating a garbage + cursor image from uninitialized data). + +commit 00decd3b6cea0de22c88b9504dbe26d680e8ab16 +Author: Krzysztof Halasa +Date: Sat Jan 27 12:29:31 2007 -0800 + + Don't zero out mode structure after setting name field. + + Instead of using memset to zero the structure (at the wrong time, no less), + use xcalloc to gather pre-initialized memory. + +commit 7a5f17087bda2833e84fa7e7ff0cb168943b89b6 +Author: Keith Packard +Date: Sat Jan 27 00:11:21 2007 -0800 + + Mark crtc region as damaged when rotation is set. + + When shadow frame buffer is allocated for rotation, it needs to be + initialized by copying from the frame buffer. Do this by simply marking the + entire screen as damaged which will force an update. + +commit 2d95cb6f041653f7e530b1f32cf007929c23ef3b +Author: Keith Packard +Date: Sat Jan 27 00:04:13 2007 -0800 + + Make rotated pixmap size of mode, not rotated mode. Update only damage. + + Rotated pixmap should match size of displayed mode, not the rotated version + of that size. + + Take damaged region, rotate each box and display them instead of displaying + the whole screen after each damage update. This exposes a bug where the + screen is not correctly damaged after rotation. + +commit 5c1e27cdd243dc24dd2bfdeb46d757bbef6ba6af +Author: Eric Anholt +Date: Thu Jan 25 15:31:22 2007 -0800 + + Make rotated shadow buffer allocation dynamic. + + For EXA, this requires version 2.1 of EXA to do rotation, as the VT switching + issues were too complicated otherwise. + +commit 5a67f3d3690903a181ca854d060cfa8b4c2aca26 +Merge: 3cc583e 9811059 +Author: Nian Wu +Date: Thu Jan 25 13:40:50 2007 -0800 + + Merge branch 'crestline' of /git/xorg/driver/xf86-video-intel into crestline + +commit 3cc583ec8e79ec65103308220dd6047a4a7acddf +Merge: 566e1d3 effe579 +Author: Nian Wu +Date: Thu Jan 25 13:37:05 2007 -0800 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into crestline + +commit 6d549ed280d3fcf3fe611b095d9f8adc0196bfb6 +Merge: 75f4df2 effe579 +Author: Nian Wu +Date: Thu Jan 25 13:36:33 2007 -0800 + + Merge branch 'modesetting' of git://proxy01.pd.intel.com:9419/git/xorg/driver/xf86-video-intel into modesetting + + Conflicts: + + src/i830_driver.c + +commit 83cc4601b27d871484a2408f31154e9387064b9e +Author: Eric Anholt +Date: Wed Jan 24 16:52:22 2007 +0800 + + Fix a possible failure to misalign video allocation in XAA. + +commit e21332419581eff1d7651741bae0b640c84d0ecd +Author: Eric Anholt +Date: Wed Jan 24 12:32:38 2007 +0800 + + Warning fix. + +commit effe579e691b044e3ce59b41b5c0eaaac4368dda +Author: Dave Airlie +Date: Sun Jan 21 20:23:13 2007 +1100 + + ch7xxx: fix output detection as per datasheet, have no DVI to test this. + +commit c68dae2705d6e5b05dba7d40b6da112b98b926b4 +Author: Dave Airlie +Date: Sun Jan 21 20:22:39 2007 +1100 + + fix building with 7.1 server by hiding stuff inside RANDR_12_INTERFACE + +commit 8eb861fb61fda78e6c142ffa66c586357aaa2e44 +Author: Eric Anholt +Date: Mon Jan 22 15:50:14 2007 +0800 + + Replace the custom SaveScreen function with a generic function calling DPMS. + + With this, additional power saving occurs with the core screensaver, for + example by turning off LVDS backlight. + +commit 7161e824e89a6a69f1277e510f2344ad31721f62 +Author: Wang Zhenyu +Date: Fri Jan 19 15:15:19 2007 +0800 + + Fix DRI issue when EXA enabled + + tell DRI we are smashing the context state. + +commit 74ebff6732b9bfcf8c865b52cbebfd9bf6b73eb2 +Author: Eric Anholt +Date: Thu Jan 18 14:26:21 2007 -0800 + + Allocate separate cursor memory per CRTC and rotate cursors appropriately. + + Also, add bind/unbind of the shadow rotate buffers, which was missed in a + previous commit. + +commit 8759f4d89a141f7d69f1894ec3059ba6bd1cf86b +Author: Eric Anholt +Date: Thu Jan 18 13:13:25 2007 -0800 + + Partially deal with cursor rotation. + + The remaining issue is having a cursor image per CRTC so that the cursors can + be rotated on the independently rotated CRTCs. + +commit b296cd9b8f63ab80e8fe46fcfcdba2e9af846468 +Author: Eric Anholt +Date: Thu Jan 18 13:02:26 2007 -0800 + + Fix transformation matrices for rotation at 90 and 270 degrees. + +commit d2ae2e2ccc3a8e7dc84745c235836cba150754d8 +Author: Eric Anholt +Date: Thu Jan 18 11:37:14 2007 -0800 + + Update CRTC values first so they can be used by the driver in mode setting. + + With this, the screen now gets rotated, though there are major issues. + +commit 92b0f3d2013c32d94fe57fe674da1b195288f347 +Author: Eric Anholt +Date: Thu Jan 18 11:23:22 2007 -0800 + + Disable the clipping for now, since it won't work. + +commit 14d265a02312e9cda7a21614d77525c7140c0ca8 +Author: Eric Anholt +Date: Thu Jan 18 11:21:58 2007 -0800 + + Store fixed values, not integers, in the transformation matrix. + + Also, add a bit more error checking. + +commit cc09dc3efe7279bf67512babb0f6cdaeba654772 +Merge: 53e765d 3094100 +Author: Eric Anholt +Date: Thu Jan 18 10:20:36 2007 -0800 + + Merge branch 'modesetting' into modesetting-rotation + +commit 53e765d1cf5016961c25a798a27f0fe09bd1f237 +Author: Eric Anholt +Date: Wed Jan 17 16:56:06 2007 -0800 + + Fix broken last-minute change in determining whether we're rotated or not. + +commit f256243fff195f73bc8aa72e8dd2c6f7b33446cf +Author: Eric Anholt +Date: Wed Jan 17 16:01:18 2007 -0800 + + Allocate per-crtc rotation buffers and hook up RandR 1.2 per-CRTC rotation. + + It currently displays garbage. + +commit d17c386aee55bd223297adf78cf0fc1db43baf2d +Author: Eric Anholt +Date: Wed Jan 17 15:49:08 2007 -0800 + + Fix some segfaults: crtc->rotatedPixmap not set and dangling damage pointer. + +commit 67a152c43cb7231695b99030c952c52d4edd1e65 +Author: Eric Anholt +Date: Wed Jan 17 14:35:31 2007 -0800 + + Set all CRTCs' allowable rotations when xf86RandR12SetRotations() is called. + +commit 98110591001dfaf2b8b5ac440bea0c38456da718 +Author: Zou Nan hai +Date: Wed Jan 17 10:45:59 2007 +0800 + + enable all TV modes + +commit 3094100cdd04560af1b098bbe8024ae5270a10f4 +Author: Gary Wong +Date: Tue Jan 16 13:25:24 2007 -0800 + + Bug #9550: Add a quirk for too-high clock from EDID on the EN-7100e. + +commit 66c6427cc83e5e381932b0c10743cba4cb9ac883 +Author: Eric Anholt +Date: Tue Jan 16 12:54:29 2007 -0800 + + Add a settable backlight property for LVDS. + + This extends the output funcs to have a callback for when it's time to + configure properties, and another for when the server has changed a property + whose value isn't pending a mode set. (Pending properties are to be picked up + by the driver at mode_set time). + +commit a52df90ffcb19e7c0a3b8018db3cd1391a3ec343 +Merge: 37946c9 45696aa +Author: Keith Packard +Date: Tue Jan 16 12:20:26 2007 +1100 + + Merge branch 'modesetting' into modesetting-rotation + + Conflicts: + + src/i830_driver.c + src/i830_randr.c + + Just a few sync changes. + +commit 37946c9c8a4afa4a4fc1fe9864a8eec1c4571d2c +Author: Keith Packard +Date: Tue Jan 16 12:14:55 2007 +1100 + + Interim work on rotation support with new xf86 code. + + Yes, there are lots of bits tied together here, and we should split this + patch apart. + + Move I830 mode setting to xf86 mode setting. + + Make mode setting function also set the base address. This should fix + problems where the base gets set incorrectly at times. + + Add driver-independent rotation support, requires driver-specific hooks for + shadow pixmap allocation, otherwise it uses Render for painting. + +commit 9a5106401a65c90df32cb71987fca7126dc22e81 +Author: Emilio Scalise +Date: Mon Jan 15 17:22:27 2007 +0000 + + patch to control mergedfb options, bug #9664 + +commit bfeda3bfc59d309772398f688d29452ba97f3973 +Author: Keith Packard +Date: Mon Jan 15 08:05:32 2007 +1100 + + Convert I830PipeSetMode to xf86CrtcSetMode. Add rotation structures. + + Makes the mode setting logic device independent. + Magic rename hooks allow multiple drivers to provide the + generic code without name conflicts. + Rotation code requires special pixmap creation hook, and uses + Render to perform the actual rotation. + +commit 319be199ba657d2b82ba034edf3581aea6dcc3f0 +Author: root +Date: Sat Jan 13 21:34:00 2007 +0000 + + Tweak to bug #9639 + +commit 85de57947570de6b3dc9197647be3e9237480880 +Author: Alan Hourihane +Date: Sat Jan 13 19:18:24 2007 +0000 + + Fix bug #9639, i810 XvMC needs linking against libdrm. + +commit 45696aa29124e2852f94880642e70bb2e0cee827 +Author: Eric Anholt +Date: Thu Jan 4 12:34:47 2007 -0800 + + EXA: Use PRIM3D_RECTLIST instead of TRIFAN so we don't get diagonal tearing. + + A side effect is the reduction in vertex dispatch, which is nice. + +commit 6874a6f25ac87783d3770f77b9192e2d36d083a3 +Author: Eric Anholt +Date: Thu Jan 11 12:34:38 2007 -0800 + + Restore legacy overlay size limits, due to card hangs at larger sizes. + +commit c288aea40775a9cf561fda9912187c3cb5baa419 +Author: Eric Anholt +Date: Thu Jan 11 10:39:00 2007 -0800 + + Bug #8845: Unify all our XV ports to 1920x1088 maximum size. + + This increases the "legacy" size, but that was checked against the 845 + documentation which claims support for 2048x2048 as well. It decreases the + textured video size, which was running into the limits of the bigrequests + extension. The new limits should fit within bigrequests while still supporting + HD videos. + +commit f5d528f8ea27de31054e7f1843e34d8379f811ea +Author: Eric Anholt +Date: Thu Jan 11 10:36:33 2007 -0800 + + Don't limit cachelines to a vertical of 2048, and increase default allocation. + + The cachelines are used for two things: XAA pixmap cache and XV memory. + Only XAA pixmap cache is referred to using an offset pointing at the + beginning of the front buffer in rendering, and XAA only uses the 2d BLT + engine, which actually has a vertical limit of 65536. So, pixmap cache is now + limited to that much vertical. + + Additionally, the previous cachelines allocation was too small for our + advertised XV limits, so video at the limits would fail with BadAlloc. Now, + XAA allocates the same approximate amount of offscreen memory as EXA: + 3 times the screen size, plus one packed HD video. + +commit d13bc016c0723f1df633ddaf5610ad73003b7c96 +Author: Eric Anholt +Date: Wed Jan 10 15:06:56 2007 -0800 + + Correct x/y/pitch limitations in several cases, and detail them in i830_exa.c. + + This reduces max framebuffer width and increases max framebuffer height on + 965, reduces max X/Y on pre-965 EXA (could have caused mis-rendering), and + increases max X/Y on 965 EXA (would have prevented acceleration). + +commit fa383289ac8a6dd1cb359e6f1991cc42beb6ff02 +Author: Eric Anholt +Date: Thu Jan 4 14:12:45 2007 -0800 + + EXA: Wait for sync before we set up new state in our static state buffers. + +commit 5857b4a1693085b8b42dd9560a7c4f5c3c82f862 +Author: Wang Zhenyu +Date: Wed Jan 10 15:09:47 2007 +0800 + + Formalize sync interface + + We should just call i830MarkSync/i830WaitSync in places we need, + which care for both XAA and EXA. + +commit efb75f56053ee06f1dbd4edfaea9986b27162afb +Author: Alan Hourihane +Date: Tue Jan 9 14:05:43 2007 +0000 + + Bump to 1.7.4 + +commit 33c0fac6d63d9a509a24c7a5e5a46a0d6ee4dc5d +Author: Alan Hourihane +Date: Tue Jan 9 14:02:47 2007 +0000 + + Fix bug #8536, i915 BIOS fails when restarting Xserver. + +commit ee52c0ec4e95fa6e5f35c9cd75005a0c0003fd97 +Author: Eric Anholt +Date: Mon Jan 8 16:53:07 2007 -0800 + + Correct typo resulting in a crash with ivch. = != ==. + +commit 566e1d397744d0b477de4da6a206919906176f49 +Merge: b13d638 da6a00f +Author: Keith Packard +Date: Mon Jan 8 12:37:49 2007 -0800 + + Merge branch 'modesetting' into crestline + +commit da6a00f787e4d13e6b75768c1976f1c44ae5bf72 +Author: Keith Packard +Date: Mon Jan 8 12:36:54 2007 -0800 + + Move EXA function declarations from source to header. + + Several new global functions were not put into the header file leading to + potential mismatches between declaration and definition. + +commit 66546d8a8006e1c828e18ccab850214fd8d56b63 +Merge: 0fd2752 40af0ee +Author: Keith Packard +Date: Mon Jan 8 10:14:24 2007 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit b13d6386dfb3a00bd9d21ac0695cdce9f812d1f3 +Author: Keith Packard +Date: Sun Jan 7 22:56:37 2007 -0800 + + Back out rotation changes for RandR 1.2 which won't work. + + RandR 1.2 requires a new rotation structure for per-CRTC rotation. + +commit 7473e7d5297f94164e0f35822166713fb21a11bd +Merge: cdde9e7 a87801f +Author: Keith Packard +Date: Sun Jan 7 22:50:27 2007 -0800 + + Merge branch 'crestline-otc' into crestline + +commit cdde9e7f4a0645ab1ee3e124de54433c1a250097 +Merge: 3110630 0fd2752 +Author: Keith Packard +Date: Sun Jan 7 22:50:12 2007 -0800 + + Merge branch 'modesetting' into crestline + +commit 0fd2752f199928f846fe03c9087f7b6d48cc28d9 +Author: Wang Zhenyu +Date: Thu Jan 4 14:35:55 2007 +0800 + + minor fix on last exa mem binding commit + +commit 3110630e04f37e184609c91494fa7f9f4d59b93f +Merge: be9b635 736d82a +Author: Keith Packard +Date: Sun Jan 7 22:44:36 2007 -0800 + + Merge branch 'modesetting' into crestline + + Conflicts: + + src/i830_rotate.c + + Pull in upstream changes to crestline branch leaving only + the PCI-IDs as local changes. + +commit 40af0ee6ba4ab7596fbc7fcc3ad04d109746ca6f +Author: Keith Packard +Date: Sat Jan 6 18:19:34 2007 -0800 + + Numerous symbol scope issues. + + I830EntityIndex is shared between 810 and newer driver. + Move most EXA rendering state into I830 structure. + Declare shared variables in shared header files rather than .c. + +commit 736d82a6b43f174cb95b425faacd4b0b889916fa +Merge: 53b42f5 4c790f6 +Author: Wang Zhenyu +Date: Mon Dec 4 15:48:04 2006 +0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 53b42f5bc7a58d02106436486e5bb56e56dbbfa1 +Author: Zou Nan hai +Date: Sat Jan 6 14:59:14 2007 -0800 + + support NTSC 480i M-J, PAL 576i for 640x480-1280x1024 sizes + + I still have problem with non-interlace mode and Hi Res mode. + also I don't know how to pickup those mode in xorg.conf + +commit 71946bcdc3c68c220996afac944698eea1974a36 +Author: Wang Zhenyu +Date: Wed Jan 3 22:37:32 2007 -0800 + + [PATCH] Add rotation support for 965. + +commit 35cebed70827999812f8343ac97ad0dffda20786 +Author: Eric Anholt +Date: Thu Nov 16 15:12:43 2006 -0800 + + [PATCH] Replace broken PCI resource size detection with pciGetBaseSize() call. + + Signed-off-by: Keith Packard + +commit 33e912aca08fa11ef588eb386e16ba5f9ea13727 +Author: Wang Zhenyu +Date: Thu Jan 4 11:25:31 2007 +0800 + + [PATCH] Fix EXA mem binding + + We should check if EXA is really enabled. + + Signed-off-by: Keith Packard + +commit fa54a3c08301e59558ab0493b3d22324f4162496 +Author: Wang Zhenyu +Date: Wed Dec 6 13:24:44 2006 +0800 + + [PATCH] fix Makefile.am + + Signed-off-by: Keith Packard + +commit 2f2c443e971faa54ffcf751b6acb444e8e7875ce +Author: Wang Zhenyu +Date: Wed Dec 6 10:43:29 2006 +0800 + + [PATCH] Formats fixes + + We should use card_fmt for src/mask picture, and use dest color + buffer format helper. Also fix wrong name for G965 texture formats, + and pict_x1r5g5b5 isn't supported by sampler engine. + + Signed-off-by: Keith Packard + +commit 0bf04fe78a8a915310ef8a90f5c7872be7476e2e +Author: Wang Zhenyu +Date: Mon Dec 4 15:48:04 2006 +0800 + + [PATCH] set correct default border color + + Signed-off-by: Keith Packard + +commit 5c461063cde68092e778c44ac6abd9129cd8019e +Author: Wang Zhenyu +Date: Mon Dec 4 15:47:31 2006 +0800 + + [PATCH] fix typo in ps kernel + + fix corrupt in some subspans + + Signed-off-by: Keith Packard + +commit 89a42d489bd370b89e5ff4e01f026b4d64723cd8 +Author: Wang Zhenyu +Date: Wed Nov 29 17:16:46 2006 +0800 + + [PATCH] shut up warning + + Signed-off-by: Keith Packard + +commit 01bfa4fa6fc0ceec8581676e5d72c68dd71efa96 +Author: Wang Zhenyu +Date: Wed Nov 29 17:14:55 2006 +0800 + + [PATCH] fix alpha blending state + + Signed-off-by: Keith Packard + +commit 79018bb47c43510d59c592592f06204189bd12dc +Author: Wang Zhenyu +Date: Wed Nov 29 17:05:32 2006 +0800 + + [PATCH] Add in sf/wm program for mask picture without CA + + Signed-off-by: Keith Packard + +commit a5b9b438469f171b002fa0b99d8cab83e51ec968 +Author: Wang Zhenyu +Date: Wed Nov 29 16:52:44 2006 +0800 + + [PATCH] misc cleanup for G965 vs/sf/wm states + + Signed-off-by: Keith Packard + +commit b7c1e1656f45e43ea2f9a47f1a487050c0884c22 +Author: Wang Zhenyu +Date: Wed Nov 29 16:40:15 2006 +0800 + + [PATCH] WM kernel needs scratch space + + Signed-off-by: Keith Packard + +commit db9cfaa35adaf79ea57bc06b27c7e37935d3e1a7 +Author: Wang Zhenyu +Date: Wed Nov 29 16:37:06 2006 +0800 + + [PATCH] Setup default border color for our samplers + + Signed-off-by: Keith Packard + +commit 70276e4e9a8a5026ec436d2be5bf5eab868aa178 +Author: Wang Zhenyu +Date: Wed Nov 29 16:30:53 2006 +0800 + + [PATCH] fix vertex buffer size + + Signed-off-by: Keith Packard + +commit e8a4cbdeff4125e28d807d0a563efc0606d21a75 +Author: Wang Zhenyu +Date: Wed Nov 29 16:24:24 2006 +0800 + + [PATCH] clean up issue cmd to ring buffer + + Make it easy to track different part of ring state, and + use rectlist primitive instead. + + Signed-off-by: Keith Packard + +commit 42534474fd2556e5987205626cca8f30e25855a8 +Author: Wang Zhenyu +Date: Wed Nov 29 16:04:16 2006 +0800 + + [PATCH] remove wrong scale_units + + Signed-off-by: Keith Packard + +commit 05e8a7989db1b8b9dfa7b688629af65d9910cc53 +Author: Wang Zhenyu +Date: Wed Nov 29 16:02:16 2006 +0800 + + [PATCH] Rename exa sf/wm program files + + Also fix some minors in wm program. + + Signed-off-by: Keith Packard + +commit 1329c86f2a4b3664920ded970a984a745a530da4 +Author: Wang Zhenyu +Date: Wed Nov 29 15:47:19 2006 +0800 + + [PATCH] EXA state mem for G965 + + Not split offscreen mem for exa, but alloc a dedicated one + for G965 states. + + Signed-off-by: Keith Packard + +commit 4c790f614ecba1f6468e51779cfaf0e36b6b17ad +Author: Jesse Barnes +Date: Sat Jan 6 08:21:36 2007 -0800 + + More sparse cleanups: + NULL vs. 0 + make some variables static + remove redundant variables + + There are only a few sparse warnings left now: some bitfield warnings + and a few 'mixing code and declarations' warnings from the ring macros. + +commit a87801f73a73e53524237be7835b8cd8b3eb282c +Author: Wang Zhenyu +Date: Thu Jan 4 14:47:48 2007 +0800 + + Fix TV load detect + + Actually load TV, otherwise we don't have expected + reg state to probe. + +commit 9cf759a2cb2580c4ac5f8cdc983389642f3cfce0 +Author: Wang Zhenyu +Date: Thu Jan 4 14:35:55 2007 +0800 + + minor fix on last exa mem binding commit + +commit f9c3ef40100acb85fca6e49c5c0e98f5c9ac97ca +Author: Wang Zhenyu +Date: Tue Oct 10 15:50:10 2006 +0800 + + [PATCH] Mark current ps kernel is experimential with little test. + + + Signed-off-by: Keith Packard + +commit ef2f25e5c6ce04c202698c5122bc8627130073c0 +Author: Wang Zhenyu +Date: Tue Oct 10 14:11:35 2006 +0800 + + [PATCH] Use sf_prog.h instead + + + Signed-off-by: Keith Packard + +commit ca608028c5301700444d39a1c631cc0d5648e1a2 +Author: Wang Zhenyu +Date: Thu Sep 28 13:55:52 2006 +0800 + + [PATCH] Fix picture's transform checking + + + Signed-off-by: Keith Packard + +commit 848368d5d0b90e03d3ec447cb5bd39fc87aea8df +Author: Wang Zhenyu +Date: Thu Sep 28 11:15:33 2006 +0800 + + [PATCH] Fallback in mask picture for now + + Do it later after finish wm kernel program. + + Signed-off-by: Keith Packard + +commit df23624eebe938fa444c80cbedcd61919ec1aeda +Author: Wang Zhenyu +Date: Thu Sep 28 11:09:52 2006 +0800 + + [PATCH] Fix compile, add wm header file. + + + Signed-off-by: Keith Packard + +commit fc944859b1b9605c748162bad1c93a6303c84aae +Author: Wang Zhenyu +Date: Thu Sep 28 10:36:00 2006 +0800 + + [PATCH] Add simplest wm kernel program for no mask picture composite + + This is a try to use new gen4asm language, and will finish + composite program for mask picture with or without CA case later. + + Signed-off-by: Keith Packard + +commit acdc2da77b445e9347a4c6e53e35c81763cbb0b8 +Author: Wang Zhenyu +Date: Wed Sep 27 16:48:43 2006 +0800 + + [PATCH] Add mask sampler state + + + Signed-off-by: Keith Packard + +commit 926d7fb09aaaabf050949ce7c6127c68441c8801 +Author: Wang Zhenyu +Date: Wed Sep 27 13:54:14 2006 +0800 + + [PATCH] change some src sampler states + + sampler for mask should also be set up, and fix + default border texel. + + Signed-off-by: Keith Packard + +commit ed73bbaf5c2e9d555c884037a249cf03e7f60fa0 +Author: Wang Zhenyu +Date: Mon Sep 25 14:35:51 2006 +0800 + + [PATCH] Add file for i965 exa composite + + This does not include ps program, which will be added + in g4a form. + + Signed-off-by: Keith Packard + +commit be9b635b82c0c77ccc0555f178f94de6e5338e27 +Merge: 9e48808 5a793b0 +Author: Keith Packard +Date: Wed Jan 3 22:15:53 2007 -0800 + + Merge branch 'modesetting' into crestline + +commit 5a793b0dcf2d5de408b55073858fcfba6d99f994 +Merge: f188525 394124c +Author: Keith Packard +Date: Wed Jan 3 21:54:05 2007 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit f188525030a8fac59e41520449b1aec9b123e4ea +Author: Keith Packard +Date: Wed Jan 3 21:53:07 2007 -0800 + + Add interlace defines for pipeconf regs + +commit 9e48808fccf5b153c2fb4027f9a09944574fdace +Author: Wang Zhenyu +Date: Thu Jan 4 11:25:31 2007 +0800 + + Fix EXA mem binding + + We should check if EXA is really enabled. + +commit ebd636dbd62cb69ed7defbd86f297c6bc7dac5dd +Merge: 75f0033 3d9ea6f +Author: Wang Zhenyu +Date: Thu Jan 4 10:13:55 2007 +0800 + + Merge branch 'modesetting' into crestline + + Conflicts: + + src/i830.h + src/i830_randr.c + +commit 3d9ea6f3c8a274f930d286fc15d3665dfaa8327a +Merge: 75f4df2 394124c +Author: Wang Zhenyu +Date: Thu Jan 4 10:12:50 2007 +0800 + + Merge branch 'modesetting' of git+ssh://zhen@git.freedesktop.org/git/xorg/driver/xf86-video-intel into modesetting + + Conflicts: + + src/i830_driver.c + +commit 394124ceaadb46d976ad5c3bdeb1b77d351c57f6 +Author: Eric Anholt +Date: Tue Jan 2 16:57:33 2007 -0800 + + Add per-CRTC gamma control support for RandR. + + This makes the CRTCs now always run in gamma-enabled mode, rather than having + flaky logic for switching modes. Also, it should clear up issues with the LUTs + being uninitialized when outputs are first brought up. + +commit 69f250af60220a875f4a04c6d682bffa352281e4 +Merge: 232e209 d960dea +Author: Keith Packard +Date: Wed Jan 3 00:39:15 2007 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 232e2094321dbcdd6a67ef230eb50494a1c7d6df +Author: Keith Packard +Date: Wed Jan 3 00:38:34 2007 -0800 + + Allow initial position to be set in config file. Increase 965 max size. + + Add relative and absolute position configuration code, using per-output + monitor sections. Options include: + + PreferredMode selects a preferred mode for this output by name + Position absolute position, x and y in a single string. + + Below relative positions; argument names other monitor. + RightOf + Above + LeftOf + + Enable force the monitor to be disabled by setting + Disable enable to no or disable to yes. + + MinClock Set valid clock ranges + MaxClock + + Monitor sections can also include sync ranges, physical size and mode lines + as documented in xorg.conf(5). + + Monitors are associated with outputs through options in the Device section: + + Option "monitor-VGA" "My VGA Monitor" + + Output named 'VGA' will use monitor section "My VGA Monitor". + +commit 58e797b2caa6effa5455fc1f13dc4c58d0658744 +Author: Keith Packard +Date: Wed Jan 3 00:04:58 2007 -0800 + + Sync dspbase/dspsurf registers by re-reading them. + + This seems to eliminate base/surf value confusion during EnterVT. + +commit d960deab39eef91fb82b9f23118323aeb4c9c63e +Author: Jesse Barnes +Date: Tue Jan 2 20:23:37 2007 -0800 + + Various sparse cleanups: + NULL vs. 0 + remove redundant pScrn in I830DRISwapContext + make I830DRISwapContext static + +commit 5057769d3a7c1b3a94f49bbff47b9697f368d975 +Author: Dave Airlie +Date: Tue Jan 2 19:25:08 2007 -0800 + + Use correct variable to initialize DVO I2C bus. + + intel_output->pI2CBus isn't initialized until the output is all happy and + running, so using it before that is rather unlikely to do much good. + +commit 2bb9bb951e664d704bdf7a808edbe8b2f50c4366 +Author: Keith Packard +Date: Tue Jan 2 14:04:10 2007 -0800 + + Typo disabled new DRI MM on all chips. + + Detection for new DRI MM wasn't converted to #define correctly because of a + typo. + +commit 5080307230d534b84090bfefc13ac437d53f915d +Author: Keith Packard +Date: Tue Jan 2 00:16:41 2007 -0800 + + Fix driver to build on RandR 1.2 systems again. + + Changes to move initial config code to RandR 1.1/1.2 common path broke + code required only for RandR 1.2. + +commit 237847007afb5a429a50b6aa0b1acc239326571b +Author: Keith Packard +Date: Tue Jan 2 00:09:35 2007 -0800 + + Make driver build and run on Xorg 7.1. Delay DSP*BASE setting until last. + + Autodetect libdrm version, disable new memory manager on older libraries. + Move new M_T_ defines from i830.h to i830_xf86Crtc.h. Add many system + headers to define functions. Use i830PipeSetBase at end of mode setting + code to set DSP*BASE and flush changes. Don't duplicate PipeSetBase call + from screen init function. Make initial RandR configuration code usable on + older versions of extension so the server doesn't start in a panning mode. + Use xfree instead of free in i830_tv.c. + +commit 25d5a892319b02dc6eb81390dea29cd88a1e7da4 +Author: Keith Packard +Date: Sun Dec 31 15:39:20 2006 -0800 + + Elide identical modes from reported list. + + Where two modes would produce precisely the same crtc settings and have the + same name, remove the latter mode from the mode list. + +commit feeefc92e450e9de58da51147325300ffabd2059 +Author: Keith Packard +Date: Sun Dec 31 14:22:53 2006 -0800 + + Replace author-specific license with generic license. + + This file retained the old MIT license with the embedded author name. + Replace that with the version that uses generic 'copyright holders' instead. + +commit 5e456251f0d6c8bef3241267f6c1b3bca4670c0d +Author: Keith Packard +Date: Sun Dec 31 14:21:12 2006 -0800 + + Replace author-specific license with generic license. + + This file retained the old MIT license with the embedded author name. + Replace that with the version that uses generic 'copyright holders' instead. + +commit 75f0033ec41a34bbe695cfd4a9bc9aa60e919c99 +Author: Wang Zhenyu +Date: Sun Dec 31 15:16:59 2006 +0800 + + Issue current virtual size to mode valid. + + Revert change in rotation patch. + +commit 2330b341c925e60bc2c991b4ca8450badbc459a4 +Author: Keith Packard +Date: Sat Dec 30 22:47:58 2006 -0800 + + Prune default modes to EDID clock limit. + + Pick out the EDID max clock value and use that to elide default modes which + are too fast. + +commit c70e7bc701cba3092acfdd66ed4d63487ac8ff9f +Merge: 8b6c456 4ed79a2 +Author: Keith Packard +Date: Sat Dec 30 21:58:36 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 8b6c456e16c81f719bb68178e3e4d26f4108a9c2 +Author: Keith Packard +Date: Sat Dec 30 21:57:42 2006 -0800 + + Detect in ProbeModes. Let get_modes set edid. Prune interlace/dblscan. + + Move output connection status detection from RandR code up to ProbeModes so + it is done before mode sets are built. Otherwise, the mode building code + will elide all modes the first time through as it ignores outputs that are + disconnected. + + Most get_modes functions fetch EDID data; make sure that any + EDID changes are used in the ProbeModes filtering of default modes. + Otherwise, stale EDID data will be used. + + Allow outputs to advertise support for interlaced and double scan modes; + prune such modes from the default mode list when outputs do not support them. + +commit 4ed79a2ba6250354ffc24fa1f7a21ca914ad157e +Author: Eric Anholt +Date: Fri Dec 29 12:19:41 2006 -0800 + + Relax tiling requirements on G965. + + For the 965, we can tile with the pitch at any integer multiple of a tile size + (128 or 512B), up to 128KB. + +commit b8692e646227e56c9ae4f72b9aaa75457b4c0f5f +Author: Keith Packard +Date: Thu Dec 28 22:23:16 2006 -0800 + + Lack of configured monitor implies no configured modes. + + Missing check for missing monitor configuration would result in segfault. + +commit 973da654219ea43916b0b44acfa09a415bed3d7a +Author: Keith Packard +Date: Thu Dec 28 22:22:22 2006 -0800 + + Sync ranges from EDID/default should not limit configured modelines. + + Limit the effect of sync ranges so that sync ranges found via EDID will not + eliminate modes explicitly added by the user. Limit default sync range to + eliminating only default modes, not configured or EDID modes. + +commit f7b1d4c1f7d17a811e17c6a17861ff70be9fbdd7 +Author: Keith Packard +Date: Thu Dec 28 22:18:57 2006 -0800 + + Belinea 10 15 55 monitor quirk - override preferred mode with largest @60Hz + + Belinea 10 15 55 model monitor reports a preferred mode of 640x350, when in + fact it wants a 1024x768 mode @ 60Hz. Add an edid quirk that selects the + largest size mode, preferring those closer to 60hz among equal sized modes. + +commit fbd3f588f0d412c20cc3f86dfad73700734a9a76 +Author: Wang Zhenyu +Date: Fri Dec 29 10:47:52 2006 +0800 + + rotation support for randr-1.2 + + This patch trys to resolve rotation regression with randr-1.2. + Tested with Crestline VGA output. See bug 83. + +commit a1796bfb51d90fd545973909404e1a77ad27c9cc +Merge: 84915ac fabfccd +Author: Wang Zhenyu +Date: Fri Dec 29 10:10:26 2006 +0800 + + Merge branch 'crestline' of git+ssh://zhen@otc-graphics.jf.intel.com/git/xorg/driver/xf86-video-intel into crestline + +commit bedab1654e2dfcf7800bd0101e6991800a544019 +Author: Eric Anholt +Date: Thu Dec 28 16:34:40 2006 -0800 + + Remove 8MB/32MB default VideoRam limits. + + With modern monitors and increased XV and EXA memory requirements, these small + limits were resulting in DRI and other initialization failures because we + wouldn't allow them enough memory. Instead, allow each piece of the system + (DRI, EXA, XAA, etc) to request as much memory as it wants, and choose the + actual videoRam to be used for laying out the memory afterwards. + + With this change, in the absence of a VideoRam option, 32MB will be allocated + for textures. + +commit 4cc5dcf6d7423239f0181f246638366edcb8be87 +Author: Keith Packard +Date: Thu Dec 28 16:43:39 2006 -0800 + + Oops, dont use symlinks for stolen xf86 header files + +commit 86da0d05e4e338e7f4c841577002eb1ba9f6b2ac +Author: Keith Packard +Date: Thu Dec 28 16:40:54 2006 -0800 + + Add stolen xf86 header files to driver source + +commit 2b0a997e5b4b51267fa4f6725f8a965093392434 +Merge: bb238a8 9cfbf1c +Author: Keith Packard +Date: Thu Dec 28 16:34:38 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit bb238a8fc234a8e5e86cd2f42c58c9816a15732c +Author: Keith Packard +Date: Thu Dec 28 16:27:22 2006 -0800 + + Configuration support: per-output mode lines, preferred mode. + + Add the modelines specified in the per-output monitor and all of the default + modes to the list to each output. Prune the resulting list to specified sync + limits and virtual sizes. Sort the resulting mode list on + preferred/size/refresh. + +commit 9cfbf1ceda8f153438df1ba4b1712c55cc872017 +Author: Eric Anholt +Date: Thu Dec 28 12:59:23 2006 -0800 + + In EXA mode, force backing pixmaps into memory when doing XV to them. + +commit e889bde13dcc2438181a03319e204ae7b9235a78 +Author: Eric Anholt +Date: Thu Dec 28 12:49:24 2006 -0800 + + Draw textured video to the backing pixmap in the composited case. + + Currently, when the backing pixmap is not in framebuffer, we just BadAlloc + rather than drawing garbage to the front buffer. This can be fixed with EXA. + +commit c7083a6f30fdf1859f60beba4c352bd790af4773 +Author: Eric Anholt +Date: Thu Dec 28 11:53:33 2006 -0800 + + Add WIP CH7017 LVDS driver. This is disconnected because it's untested. + +commit 778db49616b233f5a2f4f007ceb62a1a878a6e25 +Author: Eric Anholt +Date: Thu Dec 28 11:36:15 2006 -0800 + + Add WIP IVCH (i82807aa) driver. + + It is not currently hooked up as it hasn't been tested. The hardware that this + was written for decided to stop working. + +commit 5806f670eb3a5171ffb0b75701640d5311b34c80 +Author: Eric Anholt +Date: Thu Dec 21 16:22:14 2006 -0800 + + Reformat the DVO drivers table to be a bit more normal style. + +commit b928cef9cd5b3f88dc0880f406300d246a59e0fe +Author: Eric Anholt +Date: Thu Dec 21 16:21:28 2006 -0800 + + Move dvo driver detection into i830_dvo_init(), and use GPIOB for LVDS drivers. + + The documentation states that GPIOB is (generally) used for devices on DVOA + on the motherboard, which appears to be the case on the laptop we have with + LVDS on the motherboard. + + This patch is probably not entirely accurate, as there was apparently an LVDS + DVO card sold that could be put in desktop machines, which would likely be on + GPIOE like other ADD cards. Given that we couldn't find one of these cards for + purchase, I'm not worrying about it. + +commit fabfccd3d8a55a83138d361f66c53cb7e6d371a8 +Author: Zou Nan hai +Date: Thu Dec 28 14:48:54 2006 +0800 + + Fix + +commit ddefce4f02eb3272ad37e890350f73f03eff73c9 +Author: Zou Nan hai +Date: Thu Dec 28 14:45:53 2006 +0800 + + support NTSC 480i M-J 1280x1024 1024x768 800x600 640x480 + PAL 576i 1280x1024 1024x768 800x600 640x480 + + I still have problem with non-interlace mode and Hi Res mode. + also I don't know how to pickup those mode in xorg.conf + +commit c87462ded20904dbc6c6cbdb9547523b75fe5471 +Author: Eric Anholt +Date: Wed Dec 27 19:14:14 2006 -0800 + + Remove the nasty #define away of ErrorF in i830_video.c. + + Every new person touching this file hits this trap, so it's now removed. + +commit 6dc3387219b2b31e0c7dbaa88b568fbd54d72878 +Author: Eric Anholt +Date: Wed Dec 27 18:58:40 2006 -0800 + + Fix operator precedence issue that stuck 965 t-v state into the front buffer. + +commit 210f30bd75529d0064bc46af15464a2a47f9d4c6 +Author: Eric Anholt +Date: Wed Dec 27 18:57:50 2006 -0800 + + debugging for location of various 965 textured-video state. + +commit 82738e60769a4798d7425ffc67882d1f74043b76 +Author: Eric Anholt +Date: Wed Dec 27 18:35:35 2006 -0800 + + Fix discrepancy between XAA/EXA linear allocations that broke EXA XV. + + The XAA allocator returned an offset from the beginning of the frontbuffer + allocation (where the linear allocations come from), while EXA returned one + from the start of framebuffer. Now, both of them use the start of framebuffer + as the reference. + +commit 8165e043670f6a7fee5e7e8f33644adda5757591 +Author: Eric Anholt +Date: Wed Dec 27 18:17:37 2006 -0800 + + Bump the size of the extra space for 965 so it actually fits. + +commit f830c55e5f4efc97451240f8f18b49f46e8bce0f +Author: Eric Anholt +Date: Wed Dec 27 18:14:59 2006 -0800 + + Make the assert() in i965_video.c actually work and expose an error. + +commit a75b416c91085df1db4027a25eafcd04fef1e57c +Author: Eric Anholt +Date: Wed Dec 27 17:58:57 2006 -0800 + + Replace XAA mark/waitsyncs with the XAA/EXA wrappers. + +commit 150010d2f20f4a57f8507eba8762e36966b0f426 +Author: Eric Anholt +Date: Wed Dec 27 17:57:34 2006 -0800 + + reformat i965_video.c to 4-space indents, 80 columns, no trailing whitespace. + +commit 05066632b068ae91d7be77e3a199ea0d337d975b +Author: Eric Anholt +Date: Wed Dec 27 17:41:45 2006 -0800 + + Move 965 textured-video out to a separate file. + +commit 46df75ccd4647ea033583130253a2a2218b34a20 +Author: Eric Anholt +Date: Wed Dec 27 13:45:06 2006 -0800 + + Bug #7524: Major improvements to EXA/XAA static memory allocation. + + With this, we no longer allocate XV through the XF86 linear allocator in the + EXA case. We also no longer allocate extra space for the XF86 2D allocator + that we don't use in EXA mode, or space for the EXA allocator in XAA mode. + The EXA offscreen allocator now gets enough space for several screenfuls of + pixmaps plus one 1920x1088 movie. + + A large duplicated section of code for allocating each framebuffer in the old + dual-screen mode was also factored out. + +commit 84915ac8afeb4bbc03df8f94ab3ba351788d6501 +Author: Keith Packard +Date: Thu Dec 21 23:42:53 2006 -0800 + + If DDC detailed modes are missing physical size, pull from features. + + Monitors without detailed modes, or those which do not bother to set a + physical size in their detailed modes may still have physical size in the + global data. + +commit 1e9105395a7900521206b28bae4bb4f85669a0cd +Merge: df9ecf8 c237e93 +Author: Keith Packard +Date: Thu Dec 21 23:34:30 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit df9ecf8ab93f0aeffde11d438513d41220ba75cb +Author: Keith Packard +Date: Thu Dec 21 23:32:35 2006 -0800 + + Change belinea edid quirk to cover the 10 20 30W model as well. + + This larger model reported different (but still incorrect) + sync polarities, so instead of flipping them, just set them to the right + value. + +commit c237e930615f1b048895efe988d28503f5d67c37 +Author: Keith Packard +Date: Thu Dec 21 23:30:37 2006 -0800 + + Use Vesa DDC timeouts for all I2C busses. + + The default I2C timeouts are very short, and while most + modern monitors have no trouble responding at that rate, + some older ones cannot manage. + +commit d8c5dba4d797fc50d7b2b5855f34e2d2e2ad3e4f +Author: Keith Packard +Date: Thu Dec 21 21:20:43 2006 -0800 + + When cleaning duplicate modes, make sure ->Last is reset correctly. + + When removing the very last mode for a monitor, move the ->Last pointer to + the previous list element. + +commit fab9a6b6210daea423b609208ef57fa26571f5d3 +Author: Keith Packard +Date: Thu Dec 21 21:19:32 2006 -0800 + + Add EDID quirk support for broken EDID data. + + For EDID with known errors, add a quirk mechanism to automatically + compensate. The first quirk is for a Belinea 1440x900 monitor which + incorrectly specifies sync polarities in the detailed mode. + +commit d9b27667e6cc6c7e171b0f513d40be7658cf4574 +Author: Keith Packard +Date: Thu Dec 21 21:17:03 2006 -0800 + + PLL computations missed one possible 'm2' value. + + m2 was ranging from min <= m2 < max instead of <= max resulting in + inaccurate PLL frequencies for some modes. + +commit c5205595f2abacc9f736e1f53666302ec551cbc4 +Merge: b8f3ec7 4c0c1aa +Author: Keith Packard +Date: Thu Dec 21 02:51:33 2006 -0800 + + Merge branch 'modesetting' into crestline + +commit 4c0c1aa882cfec77b2183baec93cbc4cfaf4abe0 +Author: Keith Packard +Date: Thu Dec 21 02:33:39 2006 -0800 + + Computed corred color conversion values. + + Extract correct color conversion values for all video formats from + documentation. Use those, with appropriate conversions, for the color + conversion register values. + +commit 98fd44d681220aa31200e4262f1a7ec952a09530 +Author: Keith Packard +Date: Thu Dec 21 01:24:24 2006 -0800 + + TV subcarrier was computed from wrong clock value. + + The constants provided in the documentation for the subcarrier DDA values + assumed the clock was programmed to precisely 108MHz, but the PLL can't hit + that value exactly (or our PLL computation can't, in any case). The + result was an incorrect subcarrier frequency which resulted in synthetic + subcarrier phase shift and a lovely rainbow effect on the screen. + + Unfortunately, the documentation didn't exactly describe the function + performed by the subcarrier clock hardware, so a bit of detective work was + needed. New constants were computed using the code in tv.5c and those, along + with lots of other values from the documentation were inserted into the + necessary tables. + + The result appears to generate stable NTSC video on the svideo connector. + +commit b8f3ec77104882fc755ddc88f2583cd5d15387a4 +Author: Zou Nan hai +Date: Thu Dec 21 10:46:17 2006 +0800 + + This fix should be better, I830SetMode will call i830_sdvo_dump, + if the sdvo is not initialized, X will crash. So any application which + SetMode will crash X if there is no SDVO output. + +commit b83cbec34a8d1ff39bd303fcd27fc03dcdb1d6c3 +Author: Zou Nan hai +Date: Wed Dec 20 17:32:05 2006 +0800 + + fix null pointer reference, + I hit this when running doom3-demo + +commit 4ba72fc408e7fab7c384aff5e73f0cfb8fd86cf3 +Author: Keith Packard +Date: Tue Dec 19 22:39:57 2006 -0800 + + Reinitialize DGA mode list whenever we update the global list. + + DGA has a copy of the current mode list (yes, this is broken). + Regenerate it whenever the ddx mode list changes. + +commit 07d3f141712e2abf704cb68a59cd5d5c3390e2ca +Merge: 0cd1a11 c28075e +Author: Keith Packard +Date: Tue Dec 19 22:01:02 2006 -0800 + + Merge branch 'modesetting' into crestline + +commit c28075e1d70c98b39fc9829a6a01da171a9b9426 +Author: Keith Packard +Date: Tue Dec 19 21:53:10 2006 -0800 + + TV output I830OutputPrivate had wrong type (crashed in SetMode). + + TV output private type field was set to I830_OUTPUT_SDVO instead of + I830_OUTPUT_TVOUT. When DGA mode setting occurred, the sdvo output debug + code would be invoked and attempt to dereference sdvo-specific bits of the + private structure leading to a segfault. + +commit 2ef4c5e8f6444aad192304e5a2f7a0c77bfb917d +Author: Keith Packard +Date: Tue Dec 19 16:45:39 2006 -0800 + + Re-initialize physical screen size only if -dpi was passed. + + Physical screen size from the config file or DDC will already + be set correctly in the screen structure, unless it was computed from the + virtual size using the -dpi command line option. Recompute physical size as + we reset the screen size if the -dpi option was used. + +commit b00951a5c87ca8c596ee9cc73d96d598eec60751 +Merge: 05cd921 c0a0ddc +Author: Keith Packard +Date: Tue Dec 19 16:22:04 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 05cd921140fae2746c3421715d7f18248a66735a +Author: Keith Packard +Date: Tue Dec 19 16:21:46 2006 -0800 + + Align textured video dither matrix to window + +commit c0a0ddc0ce69b60ac3a58d45cb32ccd0e0bfb0c9 +Author: Eric Anholt +Date: Tue Dec 19 16:06:13 2006 -0800 + + Bug #9382: Save the CRTC's desired mode in the old RandR 1.0 mode set path. + +commit 3c86fdda1d09fd22d4c15a8e412611db4cea7dcf +Author: Keith Packard +Date: Tue Dec 19 15:53:07 2006 -0800 + + Turn on dithering for 915 textured video + +commit 293ad158ece941eeb9894f5af4d663464b9954e5 +Author: Eric Anholt +Date: Tue Dec 19 14:35:51 2006 -0800 + + Remove 8k framebuffer stride restriction on 965. + + Also, clean up the message if the limitation is hit. + +commit ff1223142aedcf888665de6e4d7d5d03a55b2688 +Author: Eric Anholt +Date: Tue Dec 19 12:49:55 2006 -0800 + + Only erase curMode in i830DisableUnusedFunctions when the CRTC is disabled. + + This bug resulted in broken xinerama, among other issues. + +commit 3b5703c7fa08e63f2a31be7496ded9c70015946d +Author: Daniel Stone +Date: Tue Dec 19 09:49:49 2006 -0800 + + Respect the srcdir. + +commit d89e211b12ff715d7475421af69157b102accaca +Author: Eric Anholt +Date: Fri Dec 15 14:39:14 2006 -0800 + + Disable configure-disabled outputs before mode setting. + + We're not supposed to turn off pipes/planes/dplls with outputs attached, which + we could have done before this. + +commit 3fc9feec7b29e0b908e3b90e0f6634117d66ba6d +Author: Eric Anholt +Date: Fri Dec 15 14:38:23 2006 -0800 + + Simplify i830DisableUnusedFunctions() by using the CRTC dpms routines. + +commit 7b8056e3e347b15b37be0116315d7d3a23aef99f +Author: Keith Packard +Date: Tue Dec 19 01:32:54 2006 -0800 + + Writing 1 to I2C line means to tristate the bus so others can manipulate it. + + We were forcing bus lines to 1 which was breaking DDC for some monitors. + Instead, make the PutBits function just tristate when writing 1 bits. + +commit 0cd1a11d4493ef4a2d05ccf8aadec743504dba5f +Author: Zou Nan hai +Date: Tue Dec 19 14:03:19 2006 +0800 + + fix for bug #108 + +commit eedef7adc53dd8337d27c02551c5778fb43bae05 +Author: Eric Anholt +Date: Mon Dec 18 15:57:44 2006 -0800 + + Add a detect() function for DVO chips, and implement it on sil164. + +commit 8983845f91cacf8110c70121e0f5f293fe443e6d +Author: Eric Anholt +Date: Mon Dec 18 15:57:08 2006 -0800 + + Fix crash in xf86SetScrnInfoModes when pScrn->modes ends up empty. + +commit fa4642048b183134544fc5ee47558446d27f6194 +Author: Eric Anholt +Date: Mon Dec 18 15:32:35 2006 -0800 + + Clean up i2c_vid interface, including de-StudlyCapsing and removing dead code. + + The old Init() function is removed and the previous Detect() function is now + init(). This leaves us room in the namespace for a detect() like other + outputs have ("is the monitor connected?"). Also, Power() became dpms(), + taking a DPMSMode*. In general, the mode setting path now matches the intel + internal path, except for the lack of mode_fixup(). + +commit dcb069a1da6b3300b0772843dd9b67efdf319637 +Author: Dave Airlie +Date: Tue Dec 19 10:29:56 2006 +1100 + + ch7xxx: add lookup table for name + + Don't load if we don't match name + +commit 0305298405bd7018e5c520bdd5ea46a75be09f37 +Author: Eric Anholt +Date: Mon Dec 18 14:49:01 2006 -0800 + + Limit modes to 165Mhz on CH7009, according to spec. + +commit 23114fbccad849249b4b7200e3d085a9ac0e2e99 +Author: Eric Anholt +Date: Mon Dec 18 14:47:44 2006 -0800 + + Align the driver to the CH7009[AB] spec. + + With this, the driver works at 640x480 and 1280x1024 on my panel. + +commit 633d718f6fb019844304228a81c84a8605da004f +Author: Eric Anholt +Date: Mon Dec 18 13:59:17 2006 -0800 + + Clean up a bunch of log noise from ch7xxx startup. + +commit 3167bc6b24bd74c50ca4c4d361b14aa24d77cfa3 +Author: Eric Anholt +Date: Mon Dec 18 13:45:55 2006 -0800 + + Fix DVO mode valid function to not throw out all modes. + +commit 4ca92da5b93b07f0bff51843f8fb5d04a2a29443 +Author: Eric Anholt +Date: Mon Dec 18 13:45:34 2006 -0800 + + Add save/restore to ch7xxx to avoid segfaults on server start. + +commit 31849edb3b503ade659981dfa36babf5ad8757c5 +Author: Eric Anholt +Date: Mon Dec 18 13:32:21 2006 -0800 + + Move the ch7xxx code to the style I've been settling on for output code. + +commit 1975fa5b010100196af201e40f43b30a149b7750 +Author: Eamon Walsh +Date: Mon Dec 18 14:08:55 2006 -0500 + + Revert "Convert callers of LookupWindow() to dixLookupWindow()." + + This reverts commit 08575331ac75783c9910cfb6e78db701a29983ac. + +commit 2d0ca2202cb0d780bb4387bbe04e5caa6512e3b1 +Author: Eric Anholt +Date: Mon Dec 18 10:37:33 2006 -0800 + + Bug #8786: Treat pictures with no color data as non-component alpha. + + This is an un(der?)-documented part of the render protocol: If the mask is + alpha only, then the component alpha flag is ignored on it. + +commit 65cd18b97bc533b24031d6eb882fd3074779ceba +Merge: bf43f8c 6823ca8 +Author: Keith Packard +Date: Sun Dec 17 17:32:24 2006 -0800 + + Merge branch 'modesetting' into crestline + +commit 6823ca87f3b1ef3b28ed167254dcfce2a80467df +Author: Keith Packard +Date: Sat Dec 16 21:12:47 2006 -0800 + + Follow mode setting order in RestoreHWState. + + Add delays after output and CRTC disable. Restore panel fit register before + PLLs are restarted. Move all VGA restore code last. Shuffle various register + writes around and add delays to match PipeSetMode code. + +commit 86558cc622b516b568cc26efdf9b64d4b660f50f +Author: Keith Packard +Date: Sat Dec 16 21:09:31 2006 -0800 + + Prefer earliest CRTC when mapping to outputs. + + For some reason, the code was preferring the last possible output when + mapping outputs to crtcs. Use the earlier CRTC instead to make the i830 + driver consistent with BIOS usage. + +commit 8e6ab99b3195325f9fe5432725fe328591c0c7e2 +Author: Keith Packard +Date: Sat Dec 16 21:06:36 2006 -0800 + + Not restoring active outputs. Wait for input sync before enabling outputs. + + Oops--looks like a typo to me; the code was callint set_target_output + instead of set_active_outputs. + + BIOS loops waiting for the SDVO input to sync before enabling outputs, this + makes sense to me. + +commit bffd611b0a1cb05868e0f93e6ff9357a3116eaa6 +Author: Keith Packard +Date: Sat Dec 16 21:03:15 2006 -0800 + + Follow BIOS order in writing DPLL/DPLL_MD registers. + + 965 BIOS writes DPLL and then DPLL_MD. + 945 BIOS writes DPLL twice. + +commit 9b1a1b170befae2e705c23ce295837d0d13b60c0 +Author: Keith Packard +Date: Sat Dec 16 16:53:49 2006 -0800 + + reorder restore writes for 965 VGA + +commit 08575331ac75783c9910cfb6e78db701a29983ac +Author: Eamon Walsh +Date: Fri Dec 15 17:44:44 2006 -0500 + + Convert callers of LookupWindow() to dixLookupWindow(). + +commit 60411bc4d0b3c53850c73b7246d5f7ed5c2d4084 +Author: Keith Packard +Date: Thu Dec 14 18:36:44 2006 -0800 + + Follow BIOS PLL write protocol (disable,enable,enable). + + This gets VGA output and text restore working, but SDVO is still not working. + +commit 082519f34b468d0c5aa08db74ff2b51cf411d743 +Author: Keith Packard +Date: Thu Dec 14 16:51:48 2006 -0800 + + Turn pll/pipe/plane on in crtc_set_mode + + Instead of delaying pll/pipe/plane enables to the dpms function, turn them + on right away in the crtc_set_mode function. To avoid rewriting these + registers in the subsequent dpms function, check each register written there + to see if the enable bit is already on and don't rewrite. + +commit 55e7a32096a58f7bb2380b04df6b3dd9dc8e5b6a +Author: Keith Packard +Date: Thu Dec 14 16:50:26 2006 -0800 + + Respect Virtual in xorg.conf + + Instead of growing virtual to fit our desired sizes, if it is set in the + config file, use the value as the virtual size and make the default + configuration fit within that size (if possible). + +commit d4142abc68888178a8f6c54fdcece91e898bc9f5 +Author: Keith Packard +Date: Thu Dec 14 13:49:08 2006 -0800 + + Set frame buffer size ranges in xf86_config. + + Initialization and default configuration code needs to know the range of + legitimate sizes for the frame buffer. + +commit 2b5a5542ad7d1c558d1684a0a69b66bab6e9d001 +Author: Keith Packard +Date: Thu Dec 14 13:43:50 2006 -0800 + + Change TV modes from Preferred to Driver. + + This avoids having the artificial TV mode size drive overall screen size. + +commit 3fe802453a85183a69c36a098639895f49b17df1 +Author: Keith Packard +Date: Wed Dec 13 13:15:14 2006 -0800 + + Move xf86CrtcConfig to ScrnInfo private. + + Pull xf86CrtcConfig out of the driver private structure and allocate a + ScrnInfo private index for it. Also, make the arrays of outputs and crtcs + dynamic instead of fixed. + +commit 0f6addc8a6aeb9bd041d0f8e8e5850e76764ba51 +Merge: 001e272 3fa5b39 +Author: Keith Packard +Date: Wed Dec 13 12:10:31 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 001e272437a0247ffbc4b9ff8a3f2b437cf4c533 +Author: Keith Packard +Date: Wed Dec 13 12:08:58 2006 -0800 + + Auto-detect working TV output by checking TV regs functionality. + + We can't figure out which chips are supposed to have TV out, so instead we + prod the TV_DAC register to see if it will hold the value written to it, if + not, we assume the chip doesn't have TV out. + +commit 3fa5b3998353518c40e2fb0c28b425ee22c8d625 +Author: Eric Anholt +Date: Wed Dec 13 11:54:36 2006 -0800 + + Add magic double-write of the dpll register to fix mac mini cold boot. + +commit e27372e85a007d8a7e31678dbdb62755c22918bf +Author: Eric Anholt +Date: Wed Dec 13 00:26:27 2006 -0800 + + Add some caution with PCI write posting and DPLL delays to i830_crtc_dpms. + + While it doesn't specifically help/hurt my test case, we've seen enough + mysterious behavior that caution is probably warranted. + +commit df0a5a25aa72563a33731f8063602dd7faad8459 +Author: Keith Packard +Date: Wed Dec 13 11:38:18 2006 -0800 + + Rename outputs to TMDS-1/TMDS-2, LVDS, TV and VGA. + + These names are reasonably short and describe the connector rather than the + target media, but we don't appear to have any way to determine what is on + the other end of the wire. More importantly, they're all unique now. + +commit e3604fc63243ab0f31673a923d20e23131b607f6 +Author: Alan Hourihane +Date: Wed Dec 13 15:42:53 2006 +0000 + + Delete ChangeLog + +commit 4cdcaac26b3f425ec8fcc2fd3eaa9bfb7a137422 +Author: Keith Packard +Date: Tue Dec 12 23:26:00 2006 -0800 + + Write dpll_md register while updating dpll as that appears to be required. + + SDVO multiplier on 965 is in the dpll_md register; for some reason, that + needs to be written along with the dpll value or the multiplier doesn't get + set correctly. + +commit 9dd1520421dcb8c7f36a684f3d2ffb6b42a6671a +Merge: d57a258 63bf484 +Author: Keith Packard +Date: Tue Dec 12 22:52:59 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit d57a25815398ae83eae8bdcb3a1b607760aa30b6 +Author: Keith Packard +Date: Tue Dec 12 22:48:21 2006 -0800 + + Elide duplicate modes in pScrn->monitor. + + xf86DDCMonitorSet dumps all of the DDC-discovered modes + into the monitor mode list without checking to see if they + are already present. This provides an ever-changing list of + modes for outputs which have no DDC and which simply duplicate the monitor + mode list. + +commit 63bf48481d4e5e285fdfe7037ea4150283163a54 +Author: Eric Anholt +Date: Tue Dec 12 22:42:41 2006 -0800 + + Correct typo in mac mini hack, and return modes when the hack is unnecessary. + +commit 41444183b59ed84c09749ca89afbef036d42ec5f +Author: Eric Anholt +Date: Tue Dec 12 18:08:57 2006 -0800 + + Replace custom, partially broken DPMS implementation with a generic one. + +commit 7ed1b05922c07ff45a5794a992fd3d59ab55aa73 +Author: Eric Anholt +Date: Tue Dec 12 16:03:52 2006 -0800 + + Fix mac mini SDVO output: write the SDVO[BC] enabled register state twice. + +commit 9776f6c68b3cdd5585e58e677c1b1318d9aedaf4 +Author: Eric Anholt +Date: Tue Dec 12 16:02:47 2006 -0800 + + Flush the plane changes in i830_crtc_dpms() + + Otherwise, the changes may not have taken effect. + +commit 54823ac39ce9666099d69196694643f04123cb4d +Author: Eric Anholt +Date: Tue Dec 12 14:38:08 2006 -0800 + + Move the SDVO sync detection to after we've turned the port on. + +commit ec45d7274333cccd20ad080facc8e995ad7b26b0 +Author: Eric Anholt +Date: Tue Dec 12 13:54:49 2006 -0800 + + Extend the error state reporting to cover ESR and decode PGTBL_ERR for 945. + +commit 838af10b85ee8c085c6d2c4fbe18fd90b2be9d3f +Author: Eric Anholt +Date: Tue Dec 12 13:45:41 2006 -0800 + + Move PrintErrorState and CheckInheritedErrors code to i830_debug.c. + +commit 668ae6ce3c3c4b93a58749fd44ef32451adb6f9c +Author: Eric Anholt +Date: Tue Dec 12 11:39:40 2006 -0800 + + Set the SDVO port to on before sending the SDVO output on command. + +commit 91a538beadc17155be395ea2c8109a0958a969bd +Author: Eric Anholt +Date: Sat Dec 9 15:58:47 2006 -0800 + + More debugging output for SDVO. + +commit ce54538b905eb329f45c1b9b15e95ddce4a7927f +Author: Eric Anholt +Date: Fri Dec 8 08:26:30 2006 -0800 + + Add a hack for DDC on my Mac Mini. + +commit c8c1fb64ccecfb88f9923ad65c9898aa44692260 +Author: Eric Anholt +Date: Mon Dec 11 16:02:29 2006 -0800 + + Move the overlay mode switch status updates to when we enable/disable crtcs. + + This should help if we mode switch with randr during video playback, and also + simplifies the code by moving the protection all to one place. + +commit 3f3791ba2ece8e8a7aa3a5676f5f6361862a292c +Author: Eric Anholt +Date: Mon Dec 11 15:20:15 2006 -0800 + + Remove remnants of old savedCurrentMode hack. Man, that was gross. + +commit c21baa5a3044eb66f2518b018dae07eadb989aa1 +Author: Eric Anholt +Date: Mon Dec 11 15:15:01 2006 -0800 + + Remove dead remnants of old clone mode support. + +commit b3865f34669319f449f2da8f87a4eef6ec8e7804 +Author: Joshua J. Berry +Date: Mon Dec 11 14:46:20 2006 -0800 + + Include i830.h to get M_T_* compat defines for older X Servers. + + Not duplicating the defines ensures that we won't let the compat bits slip + into the X Server when we move this code over there. + +commit 24d9521c7ae72e146025f10ea85b07ebd7041716 +Author: Eric Anholt +Date: Mon Dec 11 09:34:50 2006 -0800 + + Add error messages for previous silent DRI initialization failures. + +commit bf43f8ce736d91659c2757fb39b13e63bc5891a4 +Merge: 684ea26 9452321 +Author: Wang Zhenyu +Date: Fri Dec 8 14:17:43 2006 +0800 + + Merge branch 'modesetting' into crestline + +commit 94523215127a3458a28d0f1217224a27c8870884 +Merge: 75f4df2 fde52de +Author: Wang Zhenyu +Date: Fri Dec 8 14:15:06 2006 +0800 + + Merge branch 'modesetting' of git+ssh://zhen@git.freedesktop.org/git/xorg/driver/xf86-video-intel into modesetting + +commit 684ea26b740d07ec8f6b0d223c1171e70c073bfa +Merge: 64269de 6b977f0 +Author: Wang Zhenyu +Date: Fri Dec 8 14:03:10 2006 +0800 + + Merge branch 'exa-i965' of git+ssh://zhen@git.freedesktop.org/git/xorg/driver/xf86-video-intel into crestline + +commit 99f6f84076b25af69dc226e6d4704c74d207e657 +Author: Alan Hourihane +Date: Thu Dec 7 09:47:34 2006 +0000 + + Bump to 1.7.3 + +commit fde52de870c84821ab457e17634c334a10cf71ab +Merge: 7dbe6c3 85de8a0 +Author: Keith Packard +Date: Wed Dec 6 23:40:13 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 7dbe6c378d1bc0c06ed6be4c1f9ca38ac31a5571 +Author: Keith Packard +Date: Wed Dec 6 23:39:14 2006 -0800 + + Move vga restore to end of RestoreHWState. + + I was having consistent system lockups when the vga restore + was first. Moving it to the end has reduced them to an infrequent + occurrence (but, alas, it has happened once since). This does not + make me happy. + +commit 28c7002b1cf81e286a083384575d53021d3ce906 +Author: Keith Packard +Date: Wed Dec 6 23:35:15 2006 -0800 + + Use DOUBLE_WIDE mode on all hardware. + + DOUBLE_WIDE mode is needed when the pixel clock is > 90% of the core + clock rate. The code guesses what the core clock rate is based on + the bus (AGP -> 133MHz, PCI-E -> 200MHz). + +commit 85de8a05804eaebcd61430793ef5406f196f9a95 +Author: Eric Anholt +Date: Wed Dec 6 20:26:53 2006 -0800 + + Include render.h to get SubPixelUnknown define. + +commit 64269de3c34db047e78b788dc5681abdc009f8aa +Merge: 8ddbc26 182d2f5 +Author: Keith Packard +Date: Wed Dec 6 18:09:28 2006 -0800 + + Merge branch 'modesetting' into crestline + +commit 182d2f503a7a1be90d93a4a15059585a564fd3ce +Merge: 677c454 6777d80 +Author: Keith Packard +Date: Wed Dec 6 17:18:58 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 6777d8044d5cc063698e05afb7a93a58a7a3b64a +Author: Eric Anholt +Date: Wed Dec 6 17:10:06 2006 -0800 + + Harmless warning fix. + +commit c6ce8a3c3355e8a56e86856caa56baf1cd3c0231 +Author: Eric Anholt +Date: Wed Dec 6 17:07:48 2006 -0800 + + Reduce dumpregs to X startup, after a mode set, and LeaveVT. + + While here, remove some other register dumping that is better done by + i830DumpRegs(). + +commit b23dec37b28a76433ad5d537ab508294e843cabe +Author: Eric Anholt +Date: Wed Dec 6 16:58:24 2006 -0800 + + Save/restore registers around calls in PreInit with register side-effects. + +commit d3c21c09e3904b3d32aca7563044194b061ac2fa +Author: Eric Anholt +Date: Wed Dec 6 16:50:52 2006 -0800 + + Remove stale i830_tv_pre_set_mode. Replaced by generic dpms hook call. + + Also replaced by not spamming unrelated ADPA register. At least, it had sure + better not be related. + +commit 9c3e733aaa2068fcb0164577237ed70d177e9b5a +Author: Eric Anholt +Date: Wed Dec 6 16:36:42 2006 -0800 + + Save/restore more TV registers. + +commit d5ec9d2160f47f21a6015c1cc05b57274cbb0471 +Author: Keith Packard +Date: Wed Dec 6 14:44:40 2006 -0800 + + Cannot modify DPLL register in output mode_set function. + + DPLL register contains clock setup, so it cannot be written + from the output mode_set function or 'bad things' happen. + +commit 5d345c13a949caef384a63769d7185885de6d26d +Author: Keith Packard +Date: Wed Dec 6 13:19:58 2006 -0800 + + Clean up SDVO multiplier debug output + +commit 6ee63364f5fabbc5578bcc9ded38c778595f5a6d +Merge: 56f7119 b75ecdb +Author: Keith Packard +Date: Wed Dec 6 12:53:22 2006 -0800 + + Merge branch 'modesetting' into nonrandr-setup + + Also, fix buffer overflow in i830_debug.c + +commit b75ecdb48309a15eb7c52b279c7f8523a95bcd48 +Merge: 1cb6311 b3bb10e +Author: Eric Anholt +Date: Wed Dec 6 11:59:33 2006 -0800 + + Merge branch 'generic-mode-set' into modesetting + +commit b3bb10e33e44c78f132d239e30931f97065a9fd6 +Author: Eric Anholt +Date: Wed Dec 6 11:53:40 2006 -0800 + + Fix LVDS: Don't change bits in LVDS other than port enable/pipe select. + + This behavior matches what we did before when LVDS worked. + +commit 47d07b1073c162ec00a8b173b8b6389dc4adbe88 +Author: Eric Anholt +Date: Wed Dec 6 10:56:38 2006 -0800 + + More LVDS fixed mode fixing: use the EDID DTD's blank length. + +commit 727bf1cbf72362edcbdd68001a3558fd2b2b4eca +Author: Eric Anholt +Date: Wed Dec 6 10:12:49 2006 -0800 + + Add missing newlines to new debug output. + +commit 236c53be5d94798d55219651a6885fee32ce175b +Author: Eric Anholt +Date: Wed Dec 6 10:10:27 2006 -0800 + + Fix LVDS fixed mode code after generic-mode-set. + +commit 1cb6311c1182fe98d2b8d237cef42509c3178f9a +Author: Wang Zhenyu +Date: Wed Dec 6 16:31:00 2006 +0800 + + fix typo in checking xf86CrtcScreenInit return + +commit 56f71194157ef929b62fe34a89c840bd59e56301 +Author: Keith Packard +Date: Wed Dec 6 00:13:57 2006 -0800 + + Use xf86 structures for default config instead of RandR. + + To avoid requiring RandR 1.2 in the X server, use the + xf86 Crtc and Output structures as the basis for the default configuration + computation (and, eventually, the config-file based configuration as well). + +commit 6b977f0eca388a295ca7348f5960bd8e0192cf1d +Author: Wang Zhenyu +Date: Wed Dec 6 13:24:44 2006 +0800 + + fix Makefile.am + +commit ffd8aacbe7c72b696ff7257609e3c1d45c057609 +Author: Keith Packard +Date: Tue Dec 5 19:48:39 2006 -0800 + + new server APIs are not in server-1.2 (version 7.1.99.2) + +commit a73649611414cb92697575efa90addfc3cf91cf9 +Author: Keith Packard +Date: Tue Dec 5 19:47:04 2006 -0800 + + Capture VGA registers sooner so checks are more informative + +commit 62fba80d3ea9c185ec8ae1e06c099c02bf844d8b +Author: Keith Packard +Date: Tue Dec 5 19:43:41 2006 -0800 + + fix up misleading comment in i830_crt.c about border register + +commit 041f0029c78620ca1b50e7e5d11f5d022e189641 +Author: Wang Zhenyu +Date: Wed Dec 6 10:43:29 2006 +0800 + + Formats fixes + + We should use card_fmt for src/mask picture, and use dest color + buffer format helper. Also fix wrong name for G965 texture formats, + and pict_x1r5g5b5 isn't supported by sampler engine. + +commit 1d94ec7de3387b70815679977cfc5d88200efa99 +Author: Eric Anholt +Date: Tue Dec 5 18:22:59 2006 -0800 + + Fix ordering of PIPE[AB]SRC debug output to be (x, y). + +commit eee23fdd0dadd38a2b80525ec886120150f91077 +Author: Eric Anholt +Date: Tue Dec 5 18:19:49 2006 -0800 + + Fix copy'n'paste-o of the ordering of h/v fields in DSP[AB]SIZE. + +commit 58c247c6de56508b00eadf77b4c145c94134270d +Merge: 0b4c3e7 2e8c927 +Author: Eric Anholt +Date: Tue Dec 5 15:28:21 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + + Conflicts: + + src/i830_display.c + +commit 0b4c3e7bff790e1e99ace5036a41e96046335b04 +Author: Eric Anholt +Date: Tue Dec 5 14:39:47 2006 -0800 + + Add a bunch of per-register debug code to i830DumpRegs(). + +commit 7844e576e71c004ed495bbc31f7bbe890d18b8d9 +Author: Eric Anholt +Date: Tue Dec 5 14:39:09 2006 -0800 + + Move reg dump from i830PipeSetMode to after we set up the modes with RandR. + +commit e777d38ce98d7220621b049b09df1deca5a5df42 +Author: Eric Anholt +Date: Tue Dec 5 10:01:31 2006 -0800 + + WIP code to move mode set sequencing to XFree86 handlers. + + It compiles. It definitely doesn't run. + +commit 2e8c927f9308069a82f25b65bb0c62bc5a156832 +Author: Keith Packard +Date: Mon Dec 4 14:02:30 2006 -0800 + + Re-create RandR Crtc/output structures on server regen. + + RandR structures must be re-created when the server reinitializes, + but the driver PreInit function is not re-invoked. Recreate them + manually in this case during ScreenInit. + +commit 583619cdb2b6a469299dd5bf658bf5b51ee999fe +Author: Wang Zhenyu +Date: Mon Dec 4 15:48:04 2006 +0800 + + set correct default border color + +commit f28d5fc30ccf60d72d5832bb6542522dc7f1c463 +Author: Wang Zhenyu +Date: Mon Dec 4 15:47:31 2006 +0800 + + fix typo in ps kernel + + fix corrupt in some subspans + +commit 677c454469a6223460778033758e384e989cea47 +Merge: 16f9a56 8fcf9a8 +Author: Keith Packard +Date: Sat Dec 2 23:28:38 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 8fcf9a81179ee8577ddab5e904c58fbfd14cf59c +Author: Keith Packard +Date: Sat Dec 2 22:58:31 2006 -0800 + + DOUBLE_WIDE mode for high pixel clock 8xx. Rewrite PLL search. + + High pixel clock modes on pipe A of an 8xx chip require + DOUBLE_WIDE mode. It's supposed to be modes > 180MHz or so, + but the board I have requires DOUBLE_WIDE mode for clocks > 108MHz + or so. The limit is related to the core clock speed of the chip, which + can be found indirectly through PCI config space. None of the possible + values explain why this board needs this mode for these relatively low + clock rates though. + + Also, create tables of data for the PLL computation and use them + instead of code. I think it's cleaner looking. It is also untested on + 9xx. It'll work. Really. + +commit 81dde11d419c8f9198ab3502d9813d66d0bc6d6d +Author: Eric Anholt +Date: Fri Dec 1 10:37:19 2006 -0800 + + Fix copy'n'paste-o from restructure-outputs that resulted in crashes. + + Our driver private is stored in the bus that we set up, not the DDC device + that xf86 code does. + +commit a504e31f0fefdec802ae403573f52fac3d577b65 +Author: Eric Anholt +Date: Fri Dec 1 12:49:43 2006 -0800 + + Don't try to write the read-only PP_STATUS register. + + Also, don't bother reading the PP_CONTROL register to try to get LVDS status -- + that's what PP_STATUS is for. + +commit f21230d3e1cc5470e8f88404b5d9f1702bec44bb +Author: Eric Anholt +Date: Fri Dec 1 12:48:57 2006 -0800 + + Add the [ax]4r4g4b4 source picture formats. + +commit 8ddbc26b276016b922487f7b1e8997998b655a7d +Merge: 93975a5 16f9a56 +Author: Keith Packard +Date: Fri Dec 1 10:57:16 2006 -0800 + + Merge branch 'modesetting' into crestline + + Use new TV output condition (all 9xx except 915g) + +commit 16f9a56070a01c7ada8e566d9b73fcf7900136e0 +Author: Keith Packard +Date: Fri Dec 1 10:50:27 2006 -0800 + + TV output exists on all 9xx chips except for 915G + +commit 93975a526086432cdeb8d7ead721a862d632c1e7 +Merge: 08b6569 e603cd0 +Author: Keith Packard +Date: Fri Dec 1 10:28:58 2006 -0800 + + Merge branch 'modesetting' into crestline + +commit e603cd0c73344ef137d3276b5cfcbcf4df340778 +Author: Keith Packard +Date: Fri Dec 1 10:08:36 2006 -0800 + + Leave detected TV status alone when no free CRTC is available. + + Yes, this means not detecting TV hotplug when two outputs are + already running. An alternative would be to turn off one of the other + outputs temporarily, but that would cause flashing. Something to consider. + +commit ec30356d950199903978265076b8a4e3960cf84f +Author: Keith Packard +Date: Fri Dec 1 10:06:29 2006 -0800 + + Do output detection before any crtc allocation. + + Some output detection requires a crtc for load detection, perform all of the + output detection before allocating any crtcs so that there will be a free + crtc for any load detection. Avoids losing TV detection when two monitors + are connected. + +commit 7642da82781826cb3b45078750cc54d8f592893a +Author: Keith Packard +Date: Thu Nov 30 23:21:39 2006 -0800 + + When CRTC is disable through RandR, the mode is NULL. Don't dereference it. + + Correctly interpret mode == NULL as CRTC disable, make sure the CRTC is + disabled in this case. + +commit de50ca9ed9e78c17be1badec62e35ed5e4d62b05 +Author: Eric Anholt +Date: Thu Nov 30 17:56:47 2006 -0800 + + Tristate the clock/data pins during GPIO when released while getting values. + + While the register is laid out suggesting that you can read a low value while + driving the output high, and the I2C spec seems to indicate that you should be + able to as well, and on some hardware this works successfully, on the i865 and + perhaps some other chips it doesn't. So, if we're not holding the clock or + data pin low during GetBits, tristate the pin so that we can successfully read. + + This fixes i865 analog (VGA) DDC so it successfully sees slave acks. + + Also, improve the I2C bit-banging debugging. + +commit 8c44556408601db2be799b5ac5c4da1d92886d31 +Author: Eric Anholt +Date: Thu Nov 30 15:56:52 2006 -0800 + + Preserve some GPIO bits that the docs tell us to. + +commit 28401b25cc5c1afb272e506cef196ba3a1258bd3 +Author: Eric Anholt +Date: Thu Nov 30 15:45:13 2006 -0800 + + Add debug code for the bit-banging I2C implementation. + +commit ff64bc7397cafbec94e388e1625b3a1999f1aca7 +Merge: b94b7c4 16e01b1 +Author: Keith Packard +Date: Thu Nov 30 14:09:31 2006 -0800 + + Merge branch 'restructure-outputs' into modesetting. + + Outputs and Crtcs now have a driver-independent representation which should + permit generic code to control RandR 1.2 and startup configuration. + +commit 16e01b117bb7ae90b150dd4f25a887dd895cf473 +Author: Keith Packard +Date: Thu Nov 30 11:55:29 2006 -0800 + + Oops. Don't try to use xf86RandR names, use xf86RandR12 instead. + + Attempts to override functions in core server fail, so use + new names instead. + +commit bcf206ff17c6eca8212db72dd86fcd8fdc0162da +Merge: 27ca1c1 2c8c310 +Author: Keith Packard +Date: Thu Nov 30 11:39:56 2006 -0800 + + Merge branch 'restructure-outputs-origin' into restructure-outputs + +commit 27ca1c17aab30670dd1d07e0809fd58cdecfc3b6 +Author: Keith Packard +Date: Thu Nov 30 11:39:37 2006 -0800 + + Rename I830 randr functions to xf86 as they are becoming generic. + + Change function names, create separate i830_randr.h header file + to contain definitions. + +commit b94b7c4bcfdb7ba59ed818f72309b5060a2ab7ee +Merge: b6fc8df 25e6e49 +Author: Eric Anholt +Date: Thu Nov 30 09:15:30 2006 -0800 + + Merge branch 'exa' of ../xf86-video-intel into modesetting + + Conflicts: + + man/i810.man + src/Makefile.am + src/i830.h + src/i830_driver.c + src/i830_rotate.c + src/i830_video.c + +commit b6fc8df9a52f5fe1b4d26ae06bc4d48235b44a67 +Author: Eric Anholt +Date: Wed Nov 29 15:06:32 2006 -0800 + + Properly detect the GTT size on the G965. + + In the past, the GTT has always been sized just large enough to map the whole + graphics aperture. However, apparently on the G965 that isn't the case, and + it is actually 512KB on hardware with a 256MB aperture. This resulted in X + not bothering to allocate memory for 256KB that it thought was already mapped + into stolen memory, and thus garbage rendering (particularly visible in large + video modes that displayed this unallocated memory). The kernel happens to + get the right answer by hardwiring a 512KB GTT size already, but that may not + be true on future hardware. + + Instead, we use a convenient field in PGETBL_CTL that's specifically for the + GTT size rather than the aperture size, which gets us the answer we want. + +commit 359dc81c07901665da0f86c573c096fa1661cdd2 +Author: Eric Anholt +Date: Wed Nov 29 15:01:39 2006 -0800 + + Revert "Don't allocate stuff in the first 256K of video memory (GATT?)" + + This reverts commit 997e8c9bb4235cab1fff4738387df9afcbea0a03. + + The GTT is definitely located at the end of stolen memory. This commit + apparently worked around mis-estimation of the GTT size. + +commit db391e8e4c4d87bfe3ccad0de14dd5b47b69b8fe +Author: Wang Zhenyu +Date: Wed Nov 29 17:16:46 2006 +0800 + + shut up warning + +commit 290f15cd4cda97727ebcaadacbbbf7650278934b +Author: Wang Zhenyu +Date: Wed Nov 29 17:14:55 2006 +0800 + + fix alpha blending state + +commit 3d4edd325f3859c749ee42df102bb4239eac5287 +Author: Wang Zhenyu +Date: Wed Nov 29 17:05:32 2006 +0800 + + Add in sf/wm program for mask picture without CA + +commit a704120b15efae47344a90d972e7f3da64a202a6 +Author: Wang Zhenyu +Date: Wed Nov 29 16:52:44 2006 +0800 + + misc cleanup for G965 vs/sf/wm states + +commit e3c70c68e39183226e498271c44e98ef1b96a681 +Author: Wang Zhenyu +Date: Wed Nov 29 16:40:15 2006 +0800 + + WM kernel needs scratch space + +commit aa515c54f0cfd9025fc38dc4b7938ff17a8a13fb +Author: Wang Zhenyu +Date: Wed Nov 29 16:37:06 2006 +0800 + + Setup default border color for our samplers + +commit b6eba96584bcd2c024f6443d9f3728eb65b234fb +Author: Wang Zhenyu +Date: Wed Nov 29 16:30:53 2006 +0800 + + fix vertex buffer size + +commit 453842c9ff733af45fa665d9db6a35164f45c60a +Author: Wang Zhenyu +Date: Wed Nov 29 16:24:24 2006 +0800 + + clean up issue cmd to ring buffer + + Make it easy to track different part of ring state, and + use rectlist primitive instead. + +commit 18ad7d5cf04081d89a9f978ccc7794116f7c498b +Author: Wang Zhenyu +Date: Wed Nov 29 16:04:16 2006 +0800 + + remove wrong scale_units + +commit 3d5bd0c14eea7951540f7a12eee257428f78e2d1 +Author: Wang Zhenyu +Date: Wed Nov 29 16:02:16 2006 +0800 + + Rename exa sf/wm program files + + Also fix some minors in wm program. + +commit a06beb5f80f097fac3b718e742742bb32f1c1194 +Author: Wang Zhenyu +Date: Wed Nov 29 15:47:19 2006 +0800 + + EXA state mem for G965 + + Not split offscreen mem for exa, but alloc a dedicated one + for G965 states. + +commit 9e4e7d4fa25a64a2494e7531967599142e60e716 +Author: Eric Anholt +Date: Tue Nov 28 16:36:09 2006 -0800 + + Conditionally compile old-server compatibility code in. + + This also replaces calls to compat code with the real names of the functions, + and slips #defines to an i830-namespaced version in when doing compat. + The current server version (7.1.99.2) is still left as requiring compat code, + since the version hasn't been bumped yet. + + This also fixes some failures to call the compat code, and some failures to + actually compile the compat code. Oops. + +commit 8d9ba2405d1f1e58a0cfb570e83e9206af8525b5 +Author: Eric Anholt +Date: Tue Nov 28 15:44:06 2006 -0800 + + sparse cleanups (use NULL instead of 0 for pointers) + +commit dbb8135e10e943a4d4e65f95853eeccc764ccf24 +Author: Eric Anholt +Date: Tue Nov 28 13:21:31 2006 -0800 + + Remove printing of the XFree86 screen mode list, and some other detritus. + +commit e8fb40ab1063b18372be2b5996257eb69d3f15c4 +Author: Eric Anholt +Date: Tue Nov 28 11:17:21 2006 -0800 + + Replace custom DDC mode list code with a copy of the X Server's. + + The X Server now has most of the mode helper functions we want, and we can + start removing compilation of our copies when the server is new enough. + +commit 2c8c310bd8a105dbeda5c989dca31cc766eb6bb8 +Author: Keith Packard +Date: Mon Nov 27 22:18:59 2006 -0800 + + Driver-independent code tracks num_crtc itself, don't do it in driver. + + Now that driver-independent code manages array of crtcs, let it track + the count and just have the driver compute how many there are in + a separate variable. + +commit c421724d8151d1d4578468abdbe8fe1120e373ca +Author: Keith Packard +Date: Mon Nov 27 22:15:40 2006 -0800 + + Move #include "randrstr.h" from i830.h to i830_xf86Crtc.h + + As part of the separation of driver-dependent from driver-independent code, + the interactions with RandR are moving entirely out of the driver, which + means the driver shouldn't even know about RandR, while the + driver-independent code does. + +commit e8d1db326388c9a112f2b8e2eff5a81210b8d6e4 +Author: Keith Packard +Date: Mon Nov 27 12:01:47 2006 -0800 + + Move crtc/output config to sub-structure. + + Place crtc/output in separate structure at head + of driver private structure. Use this from the config code + to make it driver-independent. Still lots of effectively driver + independent code that continues to use driver dependent stuff, + but that will change. + +commit 72692ba2e0254460c4f5a8cd476f5748383390ae +Author: Eric Anholt +Date: Mon Nov 27 11:23:55 2006 -0800 + + Postpone SDVO DDC bus creation until we've detected the SDVO device. + + This reduces log noise for those of us with no SDVO devices. + +commit 5f38bc3e2a685da5c03efa8103a353f79c842aa7 +Author: Eric Anholt +Date: Mon Nov 27 11:06:50 2006 -0800 + + Reduce the severity of many informational log messages. + +commit 85f404bc67d5ab54175c19e75aad406abfcf2133 +Author: Eric Anholt +Date: Mon Nov 20 09:32:26 2006 -0800 + + Re-indent ch7xxx driver. + +commit a0518f5a440630365b1d935b7c2d0725f326ad51 +Author: Keith Packard +Date: Sun Nov 26 19:44:38 2006 -0800 + + Remove mode setting from load detect CRTC allocation. + + To share load-detect CRTC allocation with TV driver, + move it to the output driver + +commit a47c549df036990e29f05bc3df80e1a2ab9f3b3c +Author: Keith Packard +Date: Sun Nov 26 18:26:26 2006 -0800 + + Clean up reworked data structure code so the server actually starts. + + Use i830GeLoadDetectPipe again (instead of missing xf86AllocCrtc). Actually + create new Crtc structures. Fix a few other NULL pointer dereferences. + +commit 2529863a1ade782819d76be2d0dc16e89028c1e3 +Author: Keith Packard +Date: Sun Nov 26 16:44:17 2006 -0800 + + Start output/crtc restructuring work. It compiles. + + Outputs and Crtcs are now split between 'generic' + and 'driver specific' pieces in the hope that more code + will be able to migrate to the xf86-generic layer. + + Right now, the code remains tangled together, significant + work remains to tease the pieces apart. First the code + needs to be made to actually work as-is though. + +commit 9aca4e207440119f4280b78199a221f85d50c511 +Author: Keith Packard +Date: Wed Nov 22 15:52:32 2006 -0800 + + Remove custom configuration code (which was #ifdef'd out). + + Multi-screen configuration is moving to generic code. + +commit 850e3652f4d5bb57f3c4ccb9cf29e2c75fecba9d +Author: Keith Packard +Date: Wed Nov 22 15:36:43 2006 -0800 + + Note which pipe has failed to be configured for VBlank interrupt + +commit 659e3db925de91954421f7f33c072576dfefcc4a +Author: Keith Packard +Date: Wed Nov 22 15:35:59 2006 -0800 + + Set up maximum screen size for clone instead of panorama. + + This avoids heading past the 8Kbyte stride limit of DRI so + that 3D will be available by default. + +commit 03c12f866529230df7a1503de61954cd5ade242e +Author: Keith Packard +Date: Wed Nov 22 15:34:03 2006 -0800 + + Limit DRI use to cases when pitch < 8Kbytes, not 4096 pixels. + + 3D rendering pipeline is limited to pitch of 8Kbytes and not 4096 + pixels, which rather makes a difference at 32bpp. + +commit 6781575f734f05547d7d5ceef4116fc157bba44d +Author: Alan Hourihane +Date: Wed Nov 22 16:49:57 2006 +0000 + + Be a little more verbose when rejecting modes. + +commit e065324661ad08b3b359136f48090232f6138959 +Author: Alan Hourihane +Date: Wed Nov 22 16:49:36 2006 +0000 + + update port attributes immediately when overlay is on. + +commit a0a9d1ea2ac9a0c665e5a1de5b8b8358dee3b9b4 +Author: Keith Packard +Date: Mon Nov 20 17:25:00 2006 -0800 + + Set configured values for screen virtual size and initial frame. + + Computation for virtual size and initial frame origin is quite + broken in xf86 common code. + +commit d6a0f917e601ea36643c6ad857756e19d24ecd73 +Author: Keith Packard +Date: Mon Nov 20 15:17:32 2006 -0800 + + Enable second SDVO channel. + + Rework SDVO support so that it can deal with two channels correctly, + also save/restore all connected output timings. + +commit 08b6569dc663ddf38cb36a6875de6d4ab55acac9 +Author: Eric Anholt +Date: Sun Nov 19 16:15:45 2006 -0800 + + Enable TV output on Crestline (untested). + +commit 05202cabbd23f15330b811ae6b8d708ad042bc40 +Merge: ee502dd b945a65 +Author: Eric Anholt +Date: Sun Nov 19 16:14:18 2006 -0800 + + Merge branch 'modesetting-origin' into crestline + +commit b945a650e952f98c2d101b71bd3ec0f390478da5 +Author: Keith Packard +Date: Sun Nov 19 00:54:30 2006 -0800 + + Fix TV color key. + + Subcarrier defines were incorrect in header file leaving one of the + DDA phases disabled. + +commit 28224af3d90a1a08d54a865dfaf20184330fe8a4 +Author: Keith Packard +Date: Sun Nov 19 00:40:46 2006 -0800 + + Preliminary 945 TV output. Color key is broken. Fixed mode. + + TV output is generating video with this patch, but the color burst + signal is incorrect somehow. + +commit ee502dd92a3dfccdc2efcfb76fc652694bc89e3b +Merge: 15ff17c 2fe6107 +Author: Eric Anholt +Date: Fri Nov 17 14:57:41 2006 -0800 + + Merge branch 'crestline-origin' into crestline + +commit 15ff17c756e42f392306820e3f7ffbdcc56b9892 +Merge: 9cc2f33 816fc1a +Author: Eric Anholt +Date: Fri Nov 17 11:48:53 2006 -0800 + + Merge branch 'modesetting' into crestline + + This works for analog, but SDVO output appears to not work yet. + + Conflicts: + + src/i830_driver.c + +commit 816fc1a76a5ac738e41b172ba8f43137c1521328 +Merge: 9948d83 7a7bb33 +Author: Eric Anholt +Date: Fri Nov 17 00:05:53 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + +commit 7a7bb331e10498e5b8ccec58130bb23334d36562 +Author: Keith Packard +Date: Thu Nov 16 21:19:20 2006 -0800 + + Don't dereference null DisplayModePtr on disabled output. + + During initial configuration, outputs which are disabled have null + modes. + +commit 2fe6107ac68e86ed183d8602436633348340678d +Author: Wang Zhenyu +Date: Fri Nov 17 13:11:36 2006 +0800 + + Rotation support for 965GM + +commit c4508c1cadf323e9ef1d0e69dd77d5e841a6a978 +Author: Keith Packard +Date: Thu Nov 16 21:09:23 2006 -0800 + + RandR-based initial output configuration. + + Using pre-init computed RandR information, make reasonable + default choices for the output configuration at startup time. + Either some preferred size or a size which yields 96dpi is chosen, + from which other monitors are set to a similar size. The largest + size sets the screen size. + + This needs to be extended to respect config file settings, but + those have not been defined yet. + +commit 9948d8377d70e898260c12210151b952b3fb8bf1 +Merge: 45a27f8 b649f95 +Author: Eric Anholt +Date: Thu Nov 16 19:47:24 2006 -0800 + + Merge branch 'master' into modesetting + + Conflicts: + + src/i830.h + src/i830_cursor.c + src/i830_dri.c + src/i830_driver.c + src/i830_video.c + +commit 9cc2f3313d77487dea372e6ab32d6d9c06617ae3 +Author: Eric Anholt +Date: Thu Nov 16 15:12:43 2006 -0800 + + Replace broken PCI resource size detection with pciGetBaseSize() call. + +commit 45a27f80e1c783627f570c309e7a853dcc9af0c1 +Author: Keith Packard +Date: Thu Nov 16 13:38:35 2006 -0800 + + Remove output options. Let outputs be connected to other crtcs. + + Output options will be replaced by properties. + Permits outputs to be connected to arbitrary CRTCs (within hardware limits). + No cloning yet. + +commit 9aea79d1e954fe4fb5c101edcb7c2d0f706a5c4c +Author: Keith Packard +Date: Thu Nov 16 11:40:26 2006 -0800 + + Inverted boolean sense when selecting pipe for CRT detection. + + Pipes are available when they are not in use. + +commit 4889b9f33336c92f07aac86d75f50316db6ef81a +Author: Eric Anholt +Date: Wed Nov 15 15:26:31 2006 -0800 + + Enable the LVDS if we find it and assign it to a pipe (oops). + +commit 854ff826c0031a44e874239c0b0a3533f4d9e14b +Author: Eric Anholt +Date: Tue Nov 14 09:14:24 2006 -0800 + + Disable setup of the second SDVO device until we fix it. + +commit d51555fba4e57c059fd184c1e54822d7e5b62a2f +Author: Eric Anholt +Date: Fri Nov 10 14:40:40 2006 -0800 + + Fix clock range for single-channel LVDS. + +commit dd1dcfab0ab0f2d0c25077fa663209e2762f26e8 +Author: Eric Anholt +Date: Fri Nov 10 11:08:02 2006 -0800 + + Fill in some of the high bits of mode timings for SDVO. + +commit 3955f044cfe1d592bcb36c43c539fb4a75840b8d +Author: Eric Anholt +Date: Thu Nov 9 20:28:46 2006 -0800 + + Expose the DDC-probed EDID data as the EDID_DATA output property. + +commit 0f5886689d7ef7dbbef6425d5c855ac6b67d3350 +Author: Keith Packard +Date: Wed Nov 8 23:19:59 2006 -0800 + + Create RandR 1.2 objects in I830PreInit. + + Creating the objects early will allow the driver to use + randr structures to select a reasonable configuration. + That part has not been done yet. + +commit 679c7bd82639a09cdce133becb8a08629ce3a4e9 +Author: Keith Packard +Date: Wed Nov 8 21:39:28 2006 -0800 + + ignore edited man page + +commit 81b7b489afa2cab4d8614c64f4906be627f1d07e +Author: Keith Packard +Date: Wed Nov 8 21:38:00 2006 -0800 + + Adapt to RandR updates that split object creation from screen association. + + RandR DIX code is preparing for xf86 drivers that want to allocate RandR + objects at PreInit time. This patch adapts to that change without taking + advantage of it. + +commit 81bace0c316c3ed80201a34eca533254d12cd193 +Merge: 713c5b0 beb8916 +Author: Keith Packard +Date: Wed Nov 8 20:23:20 2006 -0800 + + Merge branch 'modesetting-keithp' into modesetting + + Conflicts in PipeSetMode were resolved to use the keithp changes + that pushed more modesetting stuff into the per-pipe function. + + Switched availablePipes to num_pipes. + + Used modesetting default output configuration. + +commit 713c5b0899428edfea7cea0780244488115dbe1d +Author: Eric Anholt +Date: Wed Nov 8 19:55:31 2006 -0800 + + Change the output and pipe "is it on/off" field name to "enabled". + +commit ff77e9d84f2037b99a8e4ac55da0b0ac92ed6b9b +Author: Eric Anholt +Date: Wed Nov 8 19:53:31 2006 -0800 + + Clean up i830_crt_detect_load() a bit more. + + ADPA might not have been set right in some cases (DPMS-off monitor, for + example), and a wait for vsync that the bios does was missing. + +commit 9b267014b55f49d9362c1d432d6ba19ddd0ad95d +Author: Eric Anholt +Date: Wed Nov 8 19:39:18 2006 -0800 + + Go back to only setting up outputs that have a display connected. + +commit 35ab689bbde5f74752598cd743d735640486b639 +Author: Eric Anholt +Date: Wed Nov 8 19:35:49 2006 -0800 + + Fix i830DisableUnusedFunctions after pipe structure change. + + Using "pipe" instead of the index "i" meant pipe(3) got referenced instead of + a nice small integer. Oops. + +commit b649f95ea6fd3555d073fdbf8f2f035dfe1afd33 +Author: Alan Hourihane +Date: Wed Nov 8 19:01:25 2006 +0000 + + Disable some debug message + +commit 75f4df278e9db360967d77cdba4756cbde622d56 +Author: root +Date: Wed Nov 8 13:56:32 2006 +0800 + + 855 fix + +commit f1ff01e31eb8e9dc05190bf1a8b318d4f587f64a +Author: Keith Packard +Date: Sat Nov 4 00:46:18 2006 -0800 + + Eliminate operatingDevices member and PIPE_* values. + + operatingDevices and MonType1/MonType2 duplicate information already stored + in the device structures. Eliminate them and replace uses with direct + references to the appropriate other data. + (cherry picked from 3ab7f9693217d8fe993bdc94c376b219b0082961 commit) + +commit 0b2d36d4f038c4e8fa08632b6f1368627f010392 +Author: Keith Packard +Date: Fri Nov 3 23:29:12 2006 -0800 + + Use pI830->availablePipes instead of MAX_DISPLAY_PIPES everywhere + (cherry picked from e4bcec796e80e9fd66ab0c36394f5946915531f1 commit) + +commit d0ef9e99acb9e999e1b6d3eb76edc6355555043b +Author: Eric Anholt +Date: Mon Nov 6 18:30:46 2006 -0800 + + Restore PFIT_CONTROL before turning the LVDS back on in the restore method. + +commit 94a3731c2b4f2ea2e696a8c87dccc0d214d41e8e +Author: Eric Anholt +Date: Mon Nov 6 18:26:48 2006 -0800 + + Move PFIT_CONTROL disable for G965 up before post_set_mode. + + Also, remove setting of some other random registers that appears to have + been spammed in at the same time, and don't try to disable on the I830, before + this register existed. + +commit beb89163d73376e70870e6e2a6b19863f3a058b1 +Author: Keith Packard +Date: Sun Nov 5 19:06:45 2006 -0800 + + DSPSURF must be page aligned. Place intra-screen offset in DSPBASE. + + DSPASURF/DSPBSURF can only take page aligned values, ignoring + the lower order bits. So, place the offset for the output + within the frame buffer in the DSPABASE/DSPBBASE registers instead. + +commit 997e8c9bb4235cab1fff4738387df9afcbea0a03 +Author: Keith Packard +Date: Sun Nov 5 18:56:33 2006 -0800 + + Don't allocate stuff in the first 256K of video memory (GATT?) + + Letting the ring buffer or other objects be allocated within the lowest + portion of memory appears to trash some memory mapping data; I'm assuming + this is the GATT table on the 965. Just marking this out of bounds for + allocation fixes this problem. + +commit 5a355c72614ed77f2000e5ede45f3ff5990c79d9 +Author: Keith Packard +Date: Sun Nov 5 18:51:28 2006 -0800 + + Fix CRT output on 965 chipset. + + A few more register settings are needed to get CRT output working on the + 965 chipset, in particular the the SDVO/UDI clock multiplier register + needed to get set to the default value (3). No, I really don't know what + this does, but it does get the CRT running at a wide range of sizes. + +commit 49a6bea7d969dbfd1dd542c0c3e02abc330d6850 +Merge: 64447c7 fbb376b +Author: Wang Zhenyu +Date: Mon Nov 6 10:25:23 2006 +0800 + + Merge branch 'master' into crestline + +commit 68c3185046b27ab936ca6c92b924b443b3cd6fce +Author: Keith Packard +Date: Sun Nov 5 13:30:32 2006 -0800 + + Avoid crashing when disabling sdvo output. XXX + +commit 15ef08046bcc3e746453301379f7c5d1bf929ee1 +Author: Keith Packard +Date: Sun Nov 5 13:29:56 2006 -0800 + + Move remaining pipe mode setting logic to i830PipeSetMode + +commit 7fcb555735a58e19ccc10875b211402983170a87 +Author: Keith Packard +Date: Sat Nov 4 00:52:21 2006 -0800 + + Rename availablePipes to num_pipes + +commit 3ab7f9693217d8fe993bdc94c376b219b0082961 +Author: Keith Packard +Date: Sat Nov 4 00:46:18 2006 -0800 + + Eliminate operatingDevices member and PIPE_* values. + + operatingDevices and MonType1/MonType2 duplicate information already stored + in the device structures. Eliminate them and replace uses with direct + references to the appropriate other data. + +commit e4bcec796e80e9fd66ab0c36394f5946915531f1 +Author: Keith Packard +Date: Fri Nov 3 23:29:12 2006 -0800 + + Use pI830->availablePipes instead of MAX_DISPLAY_PIPES everywhere + +commit b7262a9a9110dac66e1a92c39dcb3ab59d95d081 +Author: Keith Packard +Date: Fri Nov 3 23:24:07 2006 -0800 + + Finish removing persistant vbe data + +commit 4625073244d4f521a07e12adcf0609e85658acbe +Author: Keith Packard +Date: Fri Nov 3 23:23:38 2006 -0800 + + Oops, martian memset of randr modes pointer + +commit 719ad68515be9b996a6314de5448843de1146b88 +Author: Keith Packard +Date: Fri Nov 3 19:41:41 2006 -0800 + + Use VBE only temporarily to fetch BIOS rom image + (cherry picked from 6a9386651785afc70a29e355255e8295b321f28e commit) + +commit 27df2ff7908ea7ea2943a5f3445e12dbc24d97c9 +Author: Eric Anholt +Date: Fri Nov 3 15:55:10 2006 -0800 + + Report pipe status (and status mismatches) in i830DescribeOutputConfiguration() + +commit ecbe73b940b2d642115de4b73c2f757eb46ff956 +Merge: 561af00 9681602 +Author: Eric Anholt +Date: Fri Nov 3 15:59:59 2006 -0800 + + Merge branch 'modesetting-origin' into modesetting + + Conflicts: + + src/i830_display.c + +commit 561af007974b8cdad1eea907fb73ed9d430c21ac +Author: Eric Anholt +Date: Fri Nov 3 15:26:14 2006 -0800 + + Add support for load-based CRT detection. + +commit e416b426d83de031441ada7a77b6bd66cec8b5c9 +Author: Eric Anholt +Date: Fri Nov 3 15:25:41 2006 -0800 + + Print out modelines as info, not error (which had been used for debugging). + +commit 282a9e073ea985cbf0d0f3f296d593af1426bad5 +Author: Eric Anholt +Date: Fri Nov 3 13:46:09 2006 -0800 + + Don't memset the modes pointer on init, which was dereferencing NULL. + +commit 9681602177124e84a817a1e1d428f1779f2a45c9 +Author: Keith Packard +Date: Fri Nov 3 12:55:25 2006 -0800 + + Create I830PipeRec to hold pipe-specific data. Remove unused I830 members. + + I830 contained six parallel arrays for pipe-specific data; these + have been moved to a I830PipeRec structure instead. + + I830 also contained several unused members: + + unsigned int bios_version; + Bool newPipeSwitch; + Bool fakeSwitch; + int fixedPipe; + + These have been removed, along with the code that set them. + +commit 0510671a6c5233468ac20f0ec8096e084df03ce6 +Author: Eric Anholt +Date: Fri Nov 3 10:58:23 2006 -0800 + + Fix a pasteo in I965 register restore. + +commit 2c9ab6e0594769274f2dbcdf7c00fe297fc385d5 +Author: Keith Packard +Date: Thu Nov 2 13:44:55 2006 -0800 + + set the v_sync_off_high to zero. XXX should check docs + +commit 56f6d4f1bb67f447500af3f4f7fa557c3e887baa +Author: Keith Packard +Date: Thu Nov 2 13:42:17 2006 -0800 + + Disable the panel fitter when not using it. Cleans up SDVO DVI output. + + The panel fitter appears to exist on the 965 hardware (at least) and + causes troubles with DVI output over SDVO when enabled. This patch + checks to see if the panel fitter is pointing at the pipe being configured + and disables it unconditionally in that case. The LVDS driver will configure + it correctly if necessary afterwards. + +commit f22d9bcc25aea19ba38d35282367b591fd1b7ca0 +Author: Keith Packard +Date: Thu Nov 2 13:34:45 2006 -0800 + + Add another couple of new registers + +commit a9eac38bcdb49df2ce1122b49bd8b1eb19e8cae5 +Author: Eric Anholt +Date: Thu Nov 2 13:24:54 2006 -0800 + + Remove duplicated register defs that were just added. + +commit 7887c76062b7c79e14fb8e4f13486aa592dcbce8 +Author: Eric Anholt +Date: Thu Nov 2 12:27:21 2006 -0800 + + Add airlied's I2C code, ifdeffed out. + + I've gone back to compare our behavior to it several times, so I'll just keep + the code in tree for now. + +commit 87b15cfbf762468d4b8728b3e7a39c76654017de +Author: Eric Anholt +Date: Thu Nov 2 11:30:21 2006 -0800 + + Remove dead specifiedMonitor field. + +commit 2636d68663a02f6d9eaf36971706b67036ebf56c +Author: Keith Packard +Date: Thu Nov 2 11:57:11 2006 -0800 + + Dump more registers for debug purposes + +commit 786ec54c4c1540f4aced63ef21d567c3b9f3282e +Author: Keith Packard +Date: Thu Nov 2 11:56:50 2006 -0800 + + Add a few more registers from the 965 spec + +commit 85e32ad2dadcce1134fcadb14ece8ff30f3925f2 +Author: Keith Packard +Date: Thu Nov 2 11:56:12 2006 -0800 + + ch7xxxSaveRegs receives real type instead of void * + +commit ffbd6ca09bc2300bf967d7c248a559d85b8706e0 +Author: Eric Anholt +Date: Wed Nov 1 13:05:44 2006 -0800 + + Remove dead VESARec struct. + +commit 97c3a1b2421031e41f0b2b1630fde1dc4262d264 +Author: Eric Anholt +Date: Wed Nov 1 13:04:08 2006 -0800 + + Remove the refresh rate appended to some mode names. + + This gets the SDVO and CRT outputs I have to have at least 1 common mode + according to RandR. + +commit 7971c401554c218c84a8c45335c9b31bbccfece7 +Author: Eric Anholt +Date: Wed Nov 1 12:42:56 2006 -0800 + + Attempt to pull monitor physical size information out of DDC EDID data. + +commit fb94c1210966f7875e5f034f10ea31c06c502c3a +Author: Eric Anholt +Date: Wed Nov 1 12:23:50 2006 -0800 + + Move mode lists from per-pipe to per-output. + + This should let RandR do the right thing in exposing the modes to userland. + + As a side effect of getting this working, the SDVO pixel clock range code + was fixed and the mode valid tests for various outputs got extended. Also, + LVDS grew a get_modes for the fixed panel mode. + + Note that we now no longer do automatic enabling of outputs at xrandr -s 0, + hotkey, or VT switch. That will be left to generic RandR code later. Also, + generic modes and user-defined modes are once again not validated into the + lists, so this is a regression there. + +commit f30d7f912f36b110c3af7dc795e35456593781ab +Author: Eric Anholt +Date: Wed Nov 1 11:50:51 2006 -0800 + + Update for the move of RandR phyiscal size information. + +commit 64447c7a059775e7ea8649f4714df7565e932c60 +Author: Zou Nanhai +Date: Wed Nov 1 14:36:20 2006 +0800 + + walk around to VBIOS bug in Crestline B0 + +commit 7195dfabd56239f08cdd8175a2ef3a66ef9600de +Author: Eric Anholt +Date: Tue Oct 31 17:10:08 2006 -0800 + + Give each output a get_modes function and expose those modes through RandR. + + The get_modes should return the probed modes only. The driver should then + append to the list (for example, compatible modes listed in other outputs, + or standard VESA modes) to create the list to expose through RandR. That + isn't done yet. + +commit cc3728be2481637dda321d3bc2e4e89a220699cd +Author: Eric Anholt +Date: Tue Oct 31 15:00:36 2006 -0800 + + Add compat definitions for M_T_PREFERRED and M_T_DRIVER for older X Servers. + +commit a71f283650e8cb7b760e5a53c4db79202c4cc5c4 +Author: Eric Anholt +Date: Tue Oct 31 14:46:23 2006 -0800 + + Connect output detection up to RandR. + +commit 68cef9f4e028755bbf3e1862da2ef47d46ddaa6a +Author: Eric Anholt +Date: Tue Oct 31 14:32:00 2006 -0800 + + Move output connection detection to a per-output method. + + This will be used by RandR, and should let us clean up some of the initial + display configuration, hopefully. + + Also, analog hotplug-based detection is now enabled on G965. + +commit 9fd719fce27f916ab5120f6e1234affa14eaed9d +Author: Eric Anholt +Date: Tue Oct 31 14:29:44 2006 -0800 + + Move SDVOB_PRESERVE_MASK next to SDVOC_PRESERVE_MASK. + +commit 4f5d4d8870fc2784192f95a561163cf4fc8737ac +Author: Eric Anholt +Date: Tue Oct 31 13:37:23 2006 -0800 + + i830SetLVDSPanelPower is now a static function in i830_lvds.c, so remove it. + +commit 49bbdf16c02107c08169f8d2b6e9c6dbd7d8cd95 +Author: Eric Anholt +Date: Tue Oct 31 10:44:45 2006 -0800 + + Fix many inconsistencies in the SDVO code compared to the spec. + + Also, fix some struct padding so that the right bits are sent out. + +commit e7d546cac06767ec58325396a3bb5780b2257c53 +Author: Eric Anholt +Date: Mon Oct 30 11:24:43 2006 -0800 + + Remove some dead code from BIOS modesetting. + +commit 2ca57040b0cd24ad3dbe693789091e28be4e69f8 +Author: Eric Anholt +Date: Mon Oct 30 11:19:19 2006 -0800 + + Remove GetBIOSVersion(). + + This info hardly useful now that we don't use the BIOS for mode setting. + +commit 837b2f632062bc29268f109895a577bd90cabd6d +Author: Eric Anholt +Date: Mon Oct 30 11:17:55 2006 -0800 + + Warning fix. + +commit bca9e6ccbd14eb8f2f103e8e64b28a623113d494 +Author: Eric Anholt +Date: Mon Oct 30 11:17:27 2006 -0800 + + Remove SetPipeAccess and now-unnecessary VBE reinit. + +commit 819a47b27cd4728feb269a08be32403304993ffa +Author: Eric Anholt +Date: Mon Oct 30 09:50:33 2006 -0800 + + Use the new fields for SDVO pixel multiply on the G965. + + This should fix display at resolutions/refresh rates in a different multiplier + class than the console display (generally, high resolution modes). + +commit 71545db4614cfc4650acc4325912474e777c3b36 +Author: Eric Anholt +Date: Mon Oct 30 09:46:10 2006 -0800 + + Return and use valid status bits for i830_sdvo_get_trained_inputs(). + +commit c357eca10ca1c535d305e1f3028471a912ae4102 +Author: Eric Anholt +Date: Mon Oct 30 09:44:55 2006 -0800 + + Clean up whitespace in i830_randr.c. + +commit fbb376bd1a4daad4c86e349df98438989ce173f1 +Author: Wang Zhenyu +Date: Mon Oct 30 14:15:12 2006 +0800 + + Bug 8594: Fix Xv hang with G965 + +commit c0ee50c4ee5ff2c594fdf60c9cb8b952e25644de +Author: Thomas Hellstrom +Date: Fri Oct 27 19:13:33 2006 +0200 + + Add support for the new DRM memory manager. + Some code are duplicated with the new libdrm. + Once this code has been released with xserver, + it can be removed. + + See the man page for new options and backwards + 3D driver compatibility. + +commit 25e6e497824a23eb231fc6fd6e483f601d612cee +Author: Eric Anholt +Date: Thu Oct 26 15:47:49 2006 -0700 + + Major cleanup of 3D invariant state, fixing hangs with rotation and render. + + Now, the generic invariant state is always set while the X Server is active, + and happens automatically when the X Server grabs the DRI lock. More 3D state + is moved to the generic code. + + Then, the 3D consumers (video, rotation, render) set last_3d to their enum + entry, and can update their own invariant state when another consumer was + active. + +commit 0bdcce2e4541c6e441c44aad49254ad3093cedb2 +Author: Eric Anholt +Date: Thu Oct 26 14:30:46 2006 -0700 + + Note alignment requirement for i915 3D (texturing). + +commit c3666a968b1cfac61b7867874d5fbe2acd894720 +Author: Eric Anholt +Date: Thu Oct 26 14:30:25 2006 -0700 + + Don't write unused values beyond the end of scale_units array. + +commit 3ab9f5a4a8cd62c8a8c2a09d3d105adbe815a83d +Author: Eric Anholt +Date: Tue Oct 24 00:26:09 2006 -0700 + + Move vbeInfo out of the driver struct to the one place it's used. + +commit df14838eb5d0a056f663d9f12bd8b5c25cf97330 +Author: Eric Anholt +Date: Tue Oct 24 00:18:33 2006 -0700 + + Remove dead memsize reporting. + + The calculation no longer made sense, as we don't use the BIOS for mode + selection. + +commit 3a6104ab89b159241845314ccf88fa62da14cf7d +Author: Eric Anholt +Date: Mon Oct 23 19:15:30 2006 -0700 + + Remove disabled I830DetectMonitorChange(). + + This used to be called when switching back in to X. It might make some sense + to detect monitors at this time (it happens to occur at resume time, when + monitors are likely to have changed), but it should probably live in either + userland policy with RandR 1.2 or RandR 1.2 XFree86-DDX generic code. + +commit 88c12f577f80fa132ec45cdf456d8060f2ece4fd +Author: Eric Anholt +Date: Mon Oct 23 18:57:57 2006 -0700 + + Move LVDS initialization and blacklisting damage to the LVDS support file. + +commit 2631014e9d5b2e64908ea413729eb5fd819b17fc +Author: Eric Anholt +Date: Wed Oct 25 12:21:44 2006 -0700 + + Clean up the SDVO code. + + The main change is to send SDVO commands using data passed into the send + command function, and receive responses into memory passed into the read + response function, rather than stuff things in/out through dev_priv->sdvo_regs. + This lets us use structures to represent some arguments, which results in a + nice cleanup (and 100% fewer arguments named magicN as a side effect). + + Also, the mode set path is changed to not do any preferred input timing + work. We weren't doing anything legitimate with the results, since we didn't + modify the CRTC timing appropriately, so now we just stuff the CRTC timing into + both and hope for the best. This should probably be revisited later. + +commit ddb986e54f5320359abac06f512f2d3f446872db +Author: Eric Anholt +Date: Tue Oct 24 17:47:58 2006 -0700 + + Nuke trailing whitespace in SDVO code not already cleaned up. + +commit cd2f0d948a6cae61b0d77d2c7184ed8d695be8c3 +Author: Eric Anholt +Date: Tue Oct 24 17:47:47 2006 -0700 + + Clean up SDVO code, moving the private structure internal and cleaning up caps. + + All the SDVO code should now be in lower case rather than StudlyCaps. + + This also adjusts the I2C setup to create a bus per SDVO output we set up. + The previous setup with shared buses was failing in some circumstances, which + is probably due to the lack of refcounting in xf86i2c.c. + +commit cd9c6e29146e1debaba4b0b9ad0d241f07bdbc14 +Merge: c5cca4c eec5580 +Author: Keith Packard +Date: Tue Oct 24 16:53:46 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit eec5580cefffc293bf547372ab63b2fedaef4a83 +Merge: 53c28b3 a91c0cb +Author: Eric Anholt +Date: Mon Oct 23 14:52:55 2006 -0700 + + Merge branch 'overhaul' into modesetting + +commit a91c0cbab5de51885bfce7c7dce76f82c1b19553 +Author: Eric Anholt +Date: Mon Oct 23 14:30:38 2006 -0700 + + Add work-in-progress integrated TV-out support. + + This is the TV connector on board for the 915GM and 945GM. + + It is currently not hooked up to output initialization as it's entirely + untested. However, I think this is a reasonable starting point for getting + TV-out actually working. + +commit 7d67324fa3a5b5cf0227550316c366752fe4abfb +Author: Alan Hourihane +Date: Mon Oct 23 17:29:17 2006 +0100 + + Add some MergedFB checks for accelerator limitations + +commit 20d263805a365be548279758bc39d027d6e56d63 +Merge: 8548fa5 5ac927d +Author: Alan Hourihane +Date: Mon Oct 23 14:24:41 2006 +0100 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 8548fa53746c9886eccfb67d022136471d8f3316 +Author: Alan Hourihane +Date: Mon Oct 23 14:23:29 2006 +0100 + + Fix manpage to report 8160 instead of 6144 for LinearAlloc. + +commit 5ac927d6f05ba6f9608d7e758cbac66e8b3a9db1 +Author: Michel Dänzer +Date: Tue Oct 17 13:27:40 2006 +0200 + + Don't crash if SetCursorPosition is called with pScrn->currentMode == NULL. + + This allows the driver to work with servers that don't have the fix for this + that was only recently pushed to git. + +commit 8149681f2eac0af3b70a9457c5204e17da56142b +Author: Eric Anholt +Date: Mon Oct 16 16:51:04 2006 -0700 + + Add a per-output mode-valid method. + + This is currently disconnected, but will be used in more overhaul work. + This should be where any output limitations, such as clocks, resolution, + scaling limits, or other options, are validated. Other limitations, such as + chipset resolution limits, CRTC clock limits, etc. should be elsewhere. + +commit c5cca4c20ae6b519e3b021a9d90809c1b3d1facb +Author: Keith Packard +Date: Fri Oct 13 15:31:43 2006 -0700 + + Advertise textured video adapter first + +commit adae75ef2f8a655a699e982ca8f26b934dbe950a +Author: Alan Hourihane +Date: Fri Oct 13 17:10:27 2006 +0100 + + Make VIDEO_DEBUG into a configure option + +commit 1d4cfaa391ac41099de11b8f3b21e5eb56543909 +Author: Alan Hourihane +Date: Fri Oct 13 13:55:10 2006 +0100 + + Bump to 1.7.2 + +commit cd9e51cd3ab0b36d2f97dfc6d8850dafe169c221 +Author: Alan Hourihane +Date: Fri Oct 13 13:54:31 2006 +0100 + + Ugh. Turn off debugging. + +commit 334aa062c333f2c59bc40e1b9239d3ea71c88a8f +Author: Alan Hourihane +Date: Fri Oct 13 12:59:30 2006 +0100 + + Bump to 1.7.1 + +commit 8045a7a0af1b276cd7f46ce99d034fd5d503e67c +Author: Alan Hourihane +Date: Fri Oct 13 12:53:53 2006 +0100 + + Fix bug #8553 & #8542 - suspend/resume regression from 1.5 driver + +commit 6596333b077a692c669f8cb4ae32e145f8da6731 +Author: Alan Hourihane +Date: Fri Oct 13 12:48:16 2006 +0100 + + Fix some warnings + +commit 1838671476875e9f5b3dde235eacf9fb43afb66c +Author: Eric Anholt +Date: Tue Oct 10 12:41:01 2006 -0700 + + Only disable the output when marked disabled. + + Also, remove a couple of dead variables. + +commit 4198f1216eb13b30d1e92d4395e98861f4324c38 +Author: Wang Zhenyu +Date: Tue Oct 10 15:50:10 2006 +0800 + + Mark current ps kernel is experimential with little test. + +commit d485c1f2de11db92b515690fbe38b6aeb6207605 +Author: Wang Zhenyu +Date: Tue Oct 10 14:11:35 2006 +0800 + + Use sf_prog.h instead + +commit 2591c1fcf15608d96031be4760cf08534461ca34 +Author: Eric Anholt +Date: Mon Oct 9 14:20:49 2006 -0700 + + Fix LVDS restore path, and move pipe assignment for outputs to the right place. + +commit 09e3d10b0ff69d180467fa9099d12da08e4f681b +Author: Eric Anholt +Date: Mon Oct 9 13:09:18 2006 -0700 + + Add a function for describing the output connection configuration. + +commit 317cc119c575650c1aa8bf992a0f42bdfffcd7ba +Author: Eric Anholt +Date: Mon Oct 9 11:49:18 2006 -0700 + + Move per-output mode setting code to per-output methods. + + This is not a very clean interface, as a number of outputs require tweaks to + the DPLL registers. When possible, the DPLLs are just adjusted in the + per-output post_set_mode, which happens just after the DPLL is enabled. + However, this seems better than the previous method of having all outputs + programmed in the same function. + +commit 53c28b3980d2682de830e8f86553ccad71527ac1 +Author: Adam Jackson +Date: Sat Oct 7 11:18:26 2006 -0400 + + Expand the check for AOpen Mini-PC. + + Just match on subsystem vendor, don't bother inspecting the subsystem device + ID, since apparently they're all busted. + +commit bf3820f1f505649ac0730add23d97d6de3f6d22c +Author: Keith Packard +Date: Fri Oct 6 21:57:26 2006 -0700 + + Compute LVDS resolution from server DPI and native panel size. + + I was unable to find the native LVDS panel physical size in the BDB + information. I would prefer to report accurate information through RandR if + possible though. + +commit c7a23908a0ef45b14b438f656a5f15582bfcbc1c +Author: Alan Hourihane +Date: Fri Oct 6 13:35:39 2006 +0100 + + Fix server regeneration problem mapping the aperture + +commit d649fb0d964a9b40b8e04314b5fc14bbbfd41bc3 +Author: Keith Packard +Date: Thu Oct 5 22:46:07 2006 -0700 + + Don't require MonitorLayout when two monitors are plugged in. + + With randr12 working, we can just leave the second monitor off for now. + +commit 9bb7736ab36f172db58703c4664bb1b0cd7f80c3 +Author: Eric Anholt +Date: Thu Oct 5 16:02:02 2006 -0700 + + Remove checks for output privates in various bits of code. + + Now, the output is only set up if it fully initializes, so it will never exist + if the private it requires doesn't. + +commit ada8f62da263d1e93e22df4e0b1149bf1dbe24d4 +Author: Eric Anholt +Date: Thu Oct 5 15:55:07 2006 -0700 + + Give each output type an init method in its file, making other methods static. + +commit 0a5504e59f90abecedd81a8435b88a60fe098f29 +Author: Keith Packard +Date: Thu Oct 5 09:11:29 2006 -0700 + + Fix DPI at startup in RandR 1.2 code. + + Use requested monitor resolution to compute the appropriate screen size when + resizing the screen during RandR initialization. + +commit 4ac81d58b7e0fbffbb4981deffe6a576be821a9b +Author: Keith Packard +Date: Wed Oct 4 23:22:52 2006 -0700 + + Remove mode origins, add preferred mode count. + + Just tracking changes in the 1.2 protocol spec. + +commit 103b4edce7859ddf58f3e1fadeb427a5e85c7acd +Author: Eric Anholt +Date: Wed Oct 4 15:00:19 2006 -0700 + + Move the save, restore, and DPMS per-output settings to per-output files. + +commit 16988b27258acfe3d56fc2415aa9ade1ae8d03a9 +Merge: cc4148e 5a06000 +Author: Keith Packard +Date: Wed Oct 4 18:44:43 2006 -0700 + + Merge branch 'modesetting-guitar' into modesetting + +commit 5a060002487e16c53dc96e32af72cd1bfcf6a227 +Author: Keith Packard +Date: Wed Oct 4 18:43:07 2006 -0700 + + Add mode origins for randr + +commit 07cdc60be8ebe5d0c21149f3cd2aeb8fed05022a +Author: Alan Hourihane +Date: Wed Oct 4 11:05:30 2006 +0100 + + Fix bug #5795, VT switching fails because of a bad test on some platforms. + +commit 8da10d15f84ccc992b828546af5ba0d848e7263e +Author: Keith Packard +Date: Tue Oct 3 22:00:14 2006 -0700 + + Enable XV_PORT attribute even when not in Clone mode. + + As Clone mode is now something that can change after server startup, always + enable the XV_PORT attribute as we cannot change the list of reported + attributes. + (cherry picked from 1bc1cedbcdf6ea4d2a3e8b07b553ac50b3c126f4 commit) + +commit cc4148e25dc226cb1365e090db21f01b77cb3cbe +Merge: 1bc1ced 3e6f81f +Author: Keith Packard +Date: Tue Oct 3 22:00:41 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit 1bc1cedbcdf6ea4d2a3e8b07b553ac50b3c126f4 +Author: Keith Packard +Date: Tue Oct 3 22:00:14 2006 -0700 + + Enable XV_PORT attribute even when not in Clone mode. + + As Clone mode is now something that can change after server startup, always + enable the XV_PORT attribute as we cannot change the list of reported + attributes. + +commit 33629ed304b64e45d5640397bd1807c5a98907d1 +Author: Keith Packard +Date: Tue Oct 3 09:39:22 2006 -0700 + + Always register list of modes for outputs, even when disabled. + +commit 3e6f81f70f65a5ba6b5c3a4e0eeaf67776a5f54d +Author: Eric Anholt +Date: Mon Oct 2 09:53:57 2006 -0700 + + Move cursor base address register setting to a separate function. + +commit f337eea9e73cbf5c71d07df50d2e5b661a1f34cf +Author: Alan Hourihane +Date: Mon Oct 2 11:16:42 2006 +0100 + + silence warning + +commit 2b9bdd8a4021231e4b5f4c5831a46c9ff1e38081 +Author: Alan Hourihane +Date: Mon Oct 2 11:12:23 2006 +0100 + + bump to 1.7.0 + +commit eca082ca0fec12973a4dbb0106b841136b5b6cdb +Author: Alan Hourihane +Date: Sat Sep 30 13:44:43 2006 +0100 + + Missing gamma bit + +commit cece9a455b54ab184a3277c164ee6dfa65b70f48 +Author: Alan Hourihane +Date: Sat Sep 30 13:27:27 2006 +0100 + + Fix issues with Xv locking up the engine. bug #7915. + +commit 2013b839de3733fd12becb2cc3c1daadde329eb4 +Author: Michel Dänzer +Date: Thu Sep 28 13:49:44 2006 +0200 + + Always call I830UpdateXineramaScreenInfo() unconditionally, and document why. + +commit 92c5020bbd31e02c7224798a8f094d237afa19a0 +Author: Wang Zhenyu +Date: Thu Sep 28 13:55:52 2006 +0800 + + Fix picture's transform checking + +commit 518802843284973f1f86132afd805c0e662e1ba6 +Author: Wang Zhenyu +Date: Thu Sep 28 11:15:33 2006 +0800 + + Fallback in mask picture for now + + Do it later after finish wm kernel program. + +commit 25ff5baad95c205c7c690da72fc0f252b3ed9289 +Author: Wang Zhenyu +Date: Thu Sep 28 11:09:52 2006 +0800 + + Fix compile, add wm header file. + +commit c3a49b5123d094280b5ff358ceef961958319ce4 +Author: Wang Zhenyu +Date: Thu Sep 28 10:36:00 2006 +0800 + + Add simplest wm kernel program for no mask picture composite + + This is a try to use new gen4asm language, and will finish + composite program for mask picture with or without CA case later. + +commit 6ea16bf6b06c8b3aed4d2c98679ab28304d1b56c +Merge: fdb6de6 b970166 +Author: Eric Anholt +Date: Wed Sep 27 16:38:01 2006 -0700 + + Merge branch 'master' into modesetting + + This reverts most of the mergedfb code. This will instead be done in device- + independent RandR code. + + Conflicts: + + src/Makefile.am + src/i810_driver.c + src/i810_reg.h + src/i830.h + src/i830_cursor.c + src/i830_driver.c + src/i830_modes.c + src/i830_video.c + +commit fdb6de663579d3b9f31bf9e8a93430b8505ca73f +Author: Eric Anholt +Date: Wed Sep 27 13:59:41 2006 -0700 + + Re-disable broken load-based CRT detection. + +commit 1407a42c7378706644fd8be554b43b0e7b581011 +Merge: 25890ec 4bd3b89 +Author: Eric Anholt +Date: Wed Sep 27 13:33:23 2006 -0700 + + Merge branch 'randr-1.2' into modesetting + +commit 25890ecda9fd00fad9bc53dea83fc58e0013fcdf +Merge: 965609f 117ff04 +Author: Eric Anholt +Date: Wed Sep 27 13:33:17 2006 -0700 + + Merge branch 'acpi-hotkey' into modesetting + + Conflicts: + + src/i830.h + src/i830_driver.c + +commit 117ff04b504578a24dff70659e2db1b81aaa1177 +Author: Eric Anholt +Date: Thu Sep 21 17:03:34 2006 -0700 + + Attempt to make the ACPI hotkey support a little more modesetting-compatible. + + Previously, we watched for the BIOS to have changed the layout, and repaired + the resulting configuration. Now, we request that the BIOS make no changes, + but leave a note in a register for when the key has been pressed. When we + notice this, we reprobe monitors and turn on/off the things we find. + + This is a temporary solution until we can get the hotkey hooked up as an + input key to external applications to control the change using RandR 1.2. It + is also untested as neither of my laptops do anything with the hotkey. + However, this code does result in many fewer BIOS calls. + +commit fe691953f08b4d299295f91450412404ba42810b +Author: Michel Dänzer +Date: Thu Aug 31 18:35:10 2006 +0200 + + Store viewport limits of both pipes in SAREA. + + This allows DRI clients to determine which pipe they should synchronize buffer + swaps of each window to. + +commit 06c5f7bd076e9ba4b925e061a40b837714bc8267 +Author: Michel Dänzer +Date: Wed Aug 30 19:45:33 2006 +0200 + + If the DRM can handle it, enable vertical blank interrupts for both pipes. + +commit 89cbc6e215a5f313ccc17370424c35630cf75892 +Author: Michel Dänzer +Date: Thu Aug 24 10:30:27 2006 +0200 + + Only enable the IRQ after DRIFinishScreenInit. + + This makes sure we've been assigned a context ID, so the interrupt context + won't mess things up if it grabs the HW lock. + +commit 185df8a18102eea79b8c8e11304dfee148ac2002 +Author: Wang Zhenyu +Date: Wed Sep 27 16:48:43 2006 +0800 + + Add mask sampler state + +commit 1422d4f04ac2d57899eee91f6522f8670f7263da +Author: Wang Zhenyu +Date: Wed Sep 27 13:54:14 2006 +0800 + + change some src sampler states + + sampler for mask should also be set up, and fix + default border texel. + +commit 6614b4bda2e079fd1e56e0825894481b80e2df58 +Merge: d6ca9fe b3ddcf3 +Author: Alan Hourihane +Date: Mon Sep 25 12:04:01 2006 +0100 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit d6ca9feb78a9211758510751bbf47013caabff49 +Author: Alan Hourihane +Date: Mon Sep 25 12:03:27 2006 +0100 + + Fix bug #7943 where video flickers when changing + attributes. This code was a leftover from testing lockups + and shouldn't be needed anymore. + +commit 52a4f2a02b8f38108bfa866bf74b1596b8125512 +Author: Wang Zhenyu +Date: Mon Sep 25 14:35:51 2006 +0800 + + Add file for i965 exa composite + + This does not include ps program, which will be added + in g4a form. + +commit f272f0d811f9ee059e8f8617a516e6c8bff917a1 +Merge: ff202f8 b3ddcf3 +Author: Wang Zhenyu +Date: Mon Sep 25 14:15:21 2006 +0800 + + Merge branch 'master' into exa + +commit 4bd3b89c73b6c5aa9b0eb553ad5d553ee0e8a489 +Author: Keith Packard +Date: Sat Sep 23 16:41:38 2006 +0100 + + Oops, duplicated CRT-redetect code. + +commit c34490bbda6604a21809d15c798607806fa6c725 +Author: Keith Packard +Date: Sat Sep 23 12:00:43 2006 +0100 + + Construct default monitor description for hotplug non-DDC monitor. + + When detecting a monitor that doesn't support DDC, construct a default + monitor with "sensible" values instead of using whatever the builtin LCD + screen uses. Clearly we need a way to set the monitor parameters when we + cannot detect them. + +commit 965609f6fa63e28e5a28128f5bc44f8c4d7b9f68 +Author: Eric Anholt +Date: Fri Sep 22 09:51:45 2006 -0700 + + Restructure i830_bios.c so we don't leak a copy of the BIOS per generation. + +commit c52242c22779a51aa12b18a7a589080ce44c8484 +Author: Eric Anholt +Date: Fri Sep 22 09:41:07 2006 -0700 + + Remove some dead code related to clock ranges. + +commit c2446be9b444b16c95f78dab17bf130f9f491ee2 +Author: Eric Anholt +Date: Fri Sep 22 09:38:11 2006 -0700 + + Remove the GetDevicePresence BIOS call which just printed BIOS information. + + Because we aren't using the BIOS to set modes any more, what the BIOS thinks is + present is probably even less important than before. + +commit b6ba268d0d5f22c6a18ce45416452fce83438620 +Author: Eric Anholt +Date: Fri Sep 22 09:31:37 2006 -0700 + + Remove the no-longer-connected VBERestore option. + +commit 20956a5d6f1eb518717a680e58938f31461ca5e4 +Author: Eric Anholt +Date: Fri Sep 22 09:27:30 2006 -0700 + + Remove unused display{Attached,Present} fields. + +commit 2cd28be71472d67956f47c7d49283ebabefa089a +Author: Eric Anholt +Date: Fri Sep 22 08:55:55 2006 -0700 + + Remove empty SAVERESTORE_HWSTATE code. + +commit ff202f8e2ae4117b464c94047001023d5d0531cc +Author: Wang Zhenyu +Date: Fri Sep 22 15:02:19 2006 +0800 + + Fix a typo to mark sync for XAA. + + This should fix the scrolling screen corrupt in + XAA method. + +commit d87d1f5bb0475c6f651fcb7e2cab2a7d46edcc69 +Author: Keith Packard +Date: Fri Sep 22 02:20:35 2006 +0100 + + Remove BIOS from non-BIOS related names. + + Lots of names included BIOS for no apparent reason; as we try to eliminate + BIOS calls from the driver, these only serve to confuse us. + (cherry picked from 8e5d280d94ad3d3ba3c75871c17abec9da62ed34 commit) + +commit b3ddcf3348365873aed4a2b8b2750b330fb4cf26 +Author: A Costa +Date: Thu Sep 21 23:18:43 2006 +1000 + + Typo fix in man page (Debian bug #364559). + +commit 4820caf46e050761d9b347b8a440381e1b1f4727 +Author: Keith Packard +Date: Thu Sep 21 01:47:27 2006 -0700 + + Make planeEnabled track pipes controlled by randr. + + Also add code to deal with disabling pipes. + +commit c11c445bdeac34253b48192a5d406b55ff8b2be7 +Author: Keith Packard +Date: Thu Sep 21 01:23:10 2006 -0700 + + Consistently use Cursor A on Pipe 0 and Cursor B on Pipe 1. + + Mixing random cursors and pipes didn't work very well. I'm left wondering + whether the palette stuff will work on pre-9xx series hardware though; it is + special cased everwhere else. + +commit 4a8b9515e914369e1faf1dca6b11204b233c73ee +Merge: 18a510b bdca869 +Author: Keith Packard +Date: Wed Sep 20 22:46:55 2006 -0700 + + Merge branch 'modesetting' into randr-1.2 + +commit bdca8697cc6ac5a98e0548b2ce2e0032e9bcfa52 +Merge: d9db5ec daade50 +Author: Keith Packard +Date: Wed Sep 20 22:46:42 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit 18a510bf9af2f288c0e94359f672775d6e9c9ab2 +Merge: f6500e9 d9db5ec +Author: Keith Packard +Date: Wed Sep 20 22:45:48 2006 -0700 + + Merge branch 'modesetting' into randr-1.2 + +commit f6500e94fec0d6db8c1f1350bee1d137bf06a09e +Author: Keith Packard +Date: Wed Sep 20 22:38:55 2006 -0700 + + Update driver for RandR 1.2 X server API. + + This is not entirely what I'd like to see, but it's at least functional. + + Limitations: + Can't disable/enable crtcs + Can't move outputs on/off crtcs + + But, it does handle monitor hot-plug, detecting changes in VGA and SDVO + status on-the fly. Which makes for good demo material. + +commit daade50ca271d1cdf236bbe84afade85d4111ac9 +Author: Linus Torvals +Date: Wed Sep 20 12:07:09 2006 -0700 + + Add standard C headers to fix build on some systems after xf86_ansic.h removal. + + This appears to have been hidden for others by header pollution in X Server + headers. + +commit 1681fe6bb041385e5aefb11baa9afd1f614abc5b +Author: Wang Zhenyu +Date: Wed Sep 20 09:36:02 2006 +0800 + + Revert "fix default tex wrap mode with clamp" + + oops, we've set border color to all zero, which should + give us transparent in RepeatNone case. + +commit d9db5ec6866555ec13ba3ddabb1516eb45637afa +Merge: cbaf3cf e3f4caf +Author: Keith Packard +Date: Tue Sep 19 16:03:04 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit 5adb05f0b82ee3a168142d803ab3434f75cf15a3 +Author: Wang Zhenyu +Date: Tue Sep 19 17:14:05 2006 +0800 + + fix default tex wrap mode with clamp + + we don't set any 'default' border color, + default tex wrap mode should be clamp to edge. + +commit e3ab89b0327ef6ff790ab53bba29c721aef032cd +Author: Eric Anholt +Date: Tue Sep 19 10:27:36 2006 +0800 + + shader program fix for component alpha set + + If CA is set and blend op needs src alpha, the src + value is not needed and should be (src.A * mask.X). + This is found in handling exa magic two pass composite. + +commit 37429c3ecb97df8faf0f3f56128d7a2b22eb8a5e +Author: Wang Zhenyu +Date: Tue Sep 19 10:08:31 2006 +0800 + + misc cleanup + +commit e3f4caf40708478ef327b029d0a75944c51ea905 +Author: Adam Jackson +Date: Fri Sep 15 13:51:18 2006 -0400 + + Add model-specific tweaks for some funky 945GM boards. + + For the Aopen Mini-PC, ignore the claimed attached 800x600 LVDS panel. + Likewise for the Apple Mac Mini, but done slightly differently since it + shares PCI IDs with the Macbook Pro. + +commit bd758030a6a59af32f9d73655cb691e018e94a7d +Author: Eric Anholt +Date: Thu Sep 14 11:12:03 2006 -0700 + + Add a compile flag to enable syncing after each operation in EXA. + + This replaces other debug sync options sprinkled around the EXA code. It + doesn't change the mis-rendering of text on the 915. + +commit f46c70e877a3432ba23696e1a16d5906183876af +Author: Eric Anholt +Date: Thu Sep 14 10:05:51 2006 -0700 + + Add a note on maxX/maxY for the 2D rendering. + +commit ce00db054bf0b7f62ff0be312d7e3470141922dc +Author: Eric Anholt +Date: Thu Sep 14 10:00:06 2006 -0700 + + Replace a couple of mis-uses of the screen's bpp when the pixmap's was needed. + +commit 71c2dd63361be9616c77db80a93445307d63dd41 +Author: Eric Anholt +Date: Thu Sep 14 09:54:19 2006 -0700 + + Replace duplicated sync code in exa with a call to I830Sync. + + The I830Sync version has additional code for the 965. + +commit 564c830a91afda76706a8c4c2f3287d0b8d514e9 +Merge: bf49084 b970166 +Author: Alan Hourihane +Date: Wed Sep 13 16:34:10 2006 +0100 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit bf49084ad700f064b732bf39a163209eee1d6845 +Author: root +Date: Wed Sep 13 16:32:39 2006 +0100 + + bump max Xvideo height to 1088 to cope with some players. + +commit 59ce4180b95270432540624a1fdf7ae8dd18a7f3 +Author: Wang Zhenyu +Date: Mon Sep 11 22:57:23 2006 +0800 + + reimplement Solid function + + Replace COLOR_BLT_CMD with XY_COLOR_BLT_CMD, by which + device would care for direction and provide a (x,y) coord + interface. This fixes pixmap artifacts even in no composite + case. + +commit 2b9c87bbf8ee5f7f56631114eb98303cd80e4a48 +Author: Eric Anholt +Date: Fri Sep 8 11:14:05 2006 -0700 + + Remove xf86_ansic.h usage. + +commit b970166eab95ac024ff481b0f5fd9aaf3644aabf +Author: Eric Anholt +Date: Fri Sep 8 11:09:19 2006 -0700 + + Fix a compile failure from the last commit. + +commit 2b7602847aa7ae9b4e88fbea070710695d2cb8a4 +Merge: e4cdc42 b45f4b5 +Author: Eric Anholt +Date: Fri Sep 8 11:02:41 2006 -0700 + + Merge branch 'exa-origin' into exa + + Conflicts: + + src/i915_exa_render.c + +commit e4cdc42a98dd1be74e5c2bf5d9566f7449523b14 +Author: Eric Anholt +Date: Thu Sep 7 10:32:02 2006 -0700 + + Remove another debug printf. + +commit 099be52a3bb52516fb5e8d56c154a4d6b6707e09 +Author: Eric Anholt +Date: Thu Sep 7 10:28:09 2006 -0700 + + Re-remove xf86_ansic.h, and move copyright to the top of the file. + +commit 4ad577f83f7190df4d64e66fbf7c515ee6f411ce +Author: Eric Anholt +Date: Thu Sep 7 10:24:23 2006 -0700 + + Remove the UTS/DFS implementations that just match the fallback versions. + +commit 8b9d7a5f8560ee55ca5cb5376517a4246cd79fb9 +Merge: 6500a3a 1e6e288 +Author: Alan Hourihane +Date: Thu Sep 7 17:45:57 2006 +0100 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 6500a3aa134e11a75b7ddaf7fff253003b223241 +Author: Alan Hourihane +Date: Thu Sep 7 17:45:28 2006 +0100 + + When in MergedFB mode, fix offscreen memory allocation. + +commit c378328ece701756ddca966eb108e2b1f5c3ed6c +Author: Eric Anholt +Date: Wed Sep 6 11:15:17 2006 -0700 + + Remove a debug printf. + +commit 1e6e288b8826789f3b2520d12426ff7852a67ccd +Author: Eric Anholt +Date: Fri Sep 1 16:47:17 2006 -0700 + + Add a check for intel-gen4asm, and rules to compile {wm,sf}_prog.h using it. + + This adds assembly source for the two programs used in the textured video + implementation on the 965, which should make them easier to modify in the + future. The compiled versions are also included, so that intel-gen4asm isn't a + build requirement for people that aren't modifying these programs. + + There are minor differences in the compiled versions of these programs compared + to their previous versions which were compiled with a different tool. I + believe the changes should be harmless, and video continues to work on my + system. + +commit cbaf3cf74bd420533d299c4113761ec536097e33 +Author: Keith Packard +Date: Thu Aug 31 18:25:21 2006 -0700 + + verbose debug message for panel sync data + +commit 1feb733eb8b09a8b07b7a6987add5149c53b0157 +Author: Alan Hourihane +Date: Tue Aug 29 14:54:15 2006 +0100 + + Fix bug with probing info of DFP2 and LFP2 connected + devices (Aaron Ridout) + +commit 26e6c074c17b2d4e9b9f165468ad45a3b0ecc0ef +Author: Alan Hourihane +Date: Mon Aug 28 11:55:38 2006 +0100 + + Fix SetVBlank to operate all the time + +commit b45f4b54b189a496255ddae12af38fc4c4408a51 +Author: Wang Zhenyu +Date: Fri Aug 25 16:23:18 2006 +0800 + + Making render log a little quiet in normal + +commit 6f0d352b83fc9f39dd86edbda9af83243b50c764 +Author: Ross Burton +Date: Thu Aug 24 18:16:42 2006 -0700 + + Bug #7957: Fix distcheck. + +commit cc79b3ec19a7e858972228a270ef774041eb8946 +Author: Wang Zhenyu +Date: Thu Aug 24 10:28:59 2006 +0800 + + Current 915 render operations for 915G/945G only + +commit 078af29fa65653c5322b006404f7ad29aec24cce +Merge: 7458a6a ea63e82 +Author: Wang Zhenyu +Date: Thu Aug 24 10:23:22 2006 +0800 + + Merge branch 'master' into exa + + Conflicts: + + man/i810.man + src/Makefile.am + src/i830_accel.c + src/i830_dga.c + src/i830_driver.c + +commit ea63e82ef417a9918e7d7105910a8ddeba2994f6 +Author: Alan Hourihane +Date: Tue Aug 22 16:40:08 2006 +0100 + + fix typo + +commit b7e57deebbda527e878326cf3e6358c0a48d7817 +Author: Wang Zhenyu +Date: Tue Aug 22 19:38:13 2006 +0800 + + pci id update for Crestline + + The "Crestline" banner should be replaced with official + name later. + +commit dc4128ea0781124984dee0cb41e7b6ee87e362a1 +Author: Alan Hourihane +Date: Mon Aug 21 12:13:42 2006 +0100 + + remove GL* usage + +commit dad0e7fc09fa7794f20278d9d99abd96a21b691e +Merge: 361c49a 43daaec +Author: Alan Hourihane +Date: Mon Aug 21 12:08:01 2006 +0100 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 361c49ad3cfe58b9ab98dfb6e95de505c0d63730 +Author: Alan Hourihane +Date: Mon Aug 21 12:07:29 2006 +0100 + + Fix bug #7930, i810 doesn't compile without DRI + (Samuel Thibault) + +commit 43daaec63929c1f0e54a5125375d8147629da4b9 +Author: Eric Anholt +Date: Thu Aug 17 15:57:31 2006 -0700 + + Bug #7905: Mark DRI state as dirty in 965 textured video, fixing hangs with 3d. + +commit cdcc6f23e8cad797e6cfd57e2ff454ec8509b5ba +Author: Alan Hourihane +Date: Wed Aug 16 17:16:28 2006 +0100 + + Disable device check when mergedfb in operation. + +commit a94c96abf90c691faecbebf0c8d08f8010bc67ef +Author: Alan Hourihane +Date: Wed Aug 16 17:15:26 2006 +0100 + + Fix bug #5150. Disable LVDS usage on i915G, i945G and i965G. + +commit 2a4e486d2990af433e915cfa26dc57cae02e01b7 +Author: Wang Zhenyu +Date: Fri Aug 11 11:07:08 2006 +0800 + + Fix undefined alloc type for agp memory + + This shuts up the nonfatal warning that type 3 for alloc agp + memory is undefined for intel-agp. + +commit 4cfed93df6b23903704348cafe050a6546e84479 +Author: Eric Anholt +Date: Thu Aug 10 15:41:32 2006 -0700 + + Bump to 1.6.5 for release. + +commit 38e7e48418cd48a46e48f5bc8a6547721db8f76d +Author: Eric Anholt +Date: Thu Aug 10 15:38:14 2006 -0700 + + Fix README typos from in the generated file. + +commit 975e60261088dee124b329d28c64e508bce1f90b +Author: Eric Anholt +Date: Thu Aug 10 13:49:43 2006 -0700 + + Bug #7829: Fix reported driver version. + + The driver now reports itself as the PACKAGE_VERSION from autoconf. The DRI + DDX -> client interface version is dissociated from this so that we can do + appropriate major/minor versioning of the interface that's not tied to the + package version. Bumped the i830 ddx dri version patchlevel to note the + fix in the previous commit. + +commit 820e9a22fdb759cbdaac4a488322825bc0908b0d +Author: Eric Anholt +Date: Thu Aug 10 13:37:18 2006 -0700 + + Bug #7835: Restore unused fields in I830DRIRec to avoid i915 DRI breakage. + + As it was, 1.6.4 broke compatibility with the released DRI driver. + +commit caa3b35cd772fc75d65a7ff791f00addbb39a764 +Author: Eric Anholt +Date: Wed Aug 9 16:11:30 2006 -0700 + + Correct typos in README source. + +commit 2a7426cf138e518a5eafb40f478359160a7ec98b +Author: Eric Anholt +Date: Wed Aug 9 15:47:09 2006 -0700 + + Clean up warnings. + +commit 24e59a0daa20b7c3e5028c9ca7972052801d02a1 +Merge: bb60807 32f1199 +Author: Eric Anholt +Date: Wed Aug 9 14:19:06 2006 -0700 + + Merge branch 'textured-video', bringing in fixed-up i915 textured video. + + Conflicts: + + src/i830_video.c + +commit bb6080735efc40e103e92b65d0c2f1f729156632 +Author: Eric Anholt +Date: Wed Aug 9 12:21:16 2006 -0700 + + Bump to 1.6.4 for release. + +commit 3ca14275d13b1261b69b0e3fda90a112cb567472 +Author: Keith Packard +Date: Wed Aug 9 10:35:57 2006 -0700 + + Add missing headers to i810_drv_la_SOURCES + +commit 309374f78df35207b1398e14bba986fb891f3643 +Author: Keith Packard +Date: Wed Aug 9 10:30:41 2006 -0700 + + Use double quotes to avoid sgml syntax error + +commit dca9f856ca21e63abeb87e4ef2c40944c26d4429 +Author: Keith Packard +Date: Wed Aug 9 10:29:59 2006 -0700 + + Reformat README + +commit b19ea222727ed47b69d28a03242c09d3a6ab2673 +Author: Eric Anholt +Date: Wed Aug 9 10:01:29 2006 -0700 + + Update the README.sgml file for the upcoming release. + +commit f8b47f607297e0591b63e5f25296af07ee74f433 +Author: Keith Packard +Date: Tue Aug 8 16:19:51 2006 -0700 + + Update manual page to include i945 and later details. + (cherry picked from 7833d0733bc146cf1ae7f588516c49797886b396 commit) + +commit d150b53d102c511f3c9245ef1f6fd36c12b01ca3 +Merge: bb65a4d bc5f565 +Author: Eric Anholt +Date: Tue Aug 8 15:51:58 2006 -0700 + + Merge branch 'i965', adding i965G support. + + Conflicts: + + src/i830_cursor.c + src/i830_driver.c + +commit bc5f56568021d8c63313e2b6bf30710e7516c04a +Author: Eric Anholt +Date: Tue Aug 8 15:48:04 2006 -0700 + + Intel bug #49: Fix video output at 32bpp by using B8G8R8A8 instead of B8G8R8X8. + + While here, don't overallocate video memory for the i965G state. + +commit c3b3d479788fcea7e543f29acf83c85b8b148fbe +Author: Alan Hourihane +Date: Tue Aug 8 15:28:14 2006 -0700 + + Intel bug #35: Fix accelerator syncing with DGA. + + Fixes glitches seen with Mark Vojkovich's "texture" demo. + +commit bc12208f6e145ec29c3ebe38ae04dc2ebca1b4cc +Author: Wang Zhenyu +Date: Mon Aug 7 13:27:00 2006 +0800 + + Disable error register dumping in dri TransitionTo2d. This's for + debug which might confuse QA. + +commit bb65a4dc55b416437d61ccbee8b6056fe8e08357 +Author: Alan Hourihane +Date: Tue Aug 8 14:51:18 2006 +0100 + + bump to 1.6.3 + +commit 37644293da751bfc7268c9fc74ecda1044607dee +Author: Alan Hourihane +Date: Tue Aug 8 14:42:32 2006 +0100 + + check for xineramaproto + +commit 3661d4df86db012682ab4b393287aa02e9fc8453 +Author: Alan Hourihane +Date: Tue Aug 8 12:25:03 2006 +0100 + + Re-enable monitor detect after a few fixups. + +commit 995b142f510d1daab3914d336f3c0d017a043b41 +Author: Alan Hourihane +Date: Tue Aug 8 12:01:39 2006 +0100 + + Disable detecting of new monitors on VT switch. + It's doesn't always work. The modesetting + branch will deal with hotplug displays correctly. + +commit 8e5844bbf9c8880c9eb6eff29b6db2db06b01933 +Author: Alan Hourihane +Date: Tue Aug 8 11:43:10 2006 +0100 + + bump to 1.6.2 to indicate mergedfb support + +commit 421b415e23c1ddc78837cd222167d6ed71a3ef88 +Author: Alan Hourihane +Date: Tue Aug 8 11:28:42 2006 +0100 + + Fix a build problem. + +commit e4f63eaf5efb654121db148f2f8e32cc3b23b6b5 +Merge: 633a683 e26f3e3 +Author: Alan Hourihane +Date: Tue Aug 8 11:07:56 2006 +0100 + + Merge branch 'master' of git+ssh://xorg.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 633a683a4adcb9a44a54519fd7ff66aab2d12f97 +Author: Alan Hourihane +Date: Tue Aug 8 10:23:29 2006 +0100 + + Ensure palette is updated in mergedfb & clone modes + +commit 71e3e2d4e3b2a2c538fe6f1cea41f442fdb8d756 +Author: Alan Hourihane +Date: Fri Aug 4 20:39:50 2006 +0100 + + Fix a problem creating the I2C bus for the SDVOC + interface, due to a name match with SDVOB. + + Bus names must be unique. + +commit 0fd4831fdcf4c8f43d80c66e43eff8942f89b324 +Author: Eric Anholt +Date: Fri Aug 4 00:21:53 2006 -0700 + + Disable dynamic front buffer mapping on i965. + + Moving front buffers should only be necessary for rotation. Currently, the + server isn't ready for it, and the method attempted to work around it caused + crashes with DRI. Since i965 doesn't support rotation yet, this should be + harmless for now. + +commit 8d0a5138503586cbf980eb9464f2db91b72509c7 +Author: Eric Anholt +Date: Thu Aug 3 19:16:59 2006 -0700 + + Add parenthesis so that IS_I965G doesn't make the test pass for 8-bit. + +commit aa69018c01d2fa963fb940718dbd653d6ca2c9eb +Author: Eric Anholt +Date: Thu Aug 3 19:12:15 2006 -0700 + + Turn off video debugging now that it appears to work fine. + +commit d15f87110807111ab7d71f1254ebe3dfef1fee80 +Merge: a79aa0d d56ffa5 +Author: Eric Anholt +Date: Thu Aug 3 19:08:34 2006 -0700 + + Merge branch 'broadwater-video-rehash' into i965 + + The previous merge wasn't done on a synced-up tree, and missed necessary + changes. + +commit a79aa0d7b27b0b9b032472776d7dda410fd66a98 +Merge: 760021e f9e94c1 +Author: Eric Anholt +Date: Thu Aug 3 17:58:56 2006 -0700 + + Merge branch 'broadwater-video-rehash' into broadwater + + Conflicts: + + src/Makefile.am + src/common.h + src/i810_driver.c + src/i810_reg.h + src/i830.h + src/i830_accel.c + src/i830_cursor.c + src/i830_dri.c + src/i830_dri.h + src/i830_driver.c + src/i830_memory.c + src/i830_rotate.c + src/i830_video.c + +commit 760021e3983f7783900075b8c9603bd4fbe7e0a2 +Author: Alan Hourihane +Date: Thu Aug 3 17:08:39 2006 -0700 + + Add current Tungsten Graphics code drop for i965 support. + +commit d56ffa5f35e3cf4262d66469052b2122fdb24027 +Author: Eric Anholt +Date: Thu Aug 3 16:03:50 2006 -0700 + + Bump PS_MAX_THREADS to 32 now that the program doesn't fail. + +commit 4525379d95ff292d7322e1a7a516c0bedd1f7543 +Author: Eric Anholt +Date: Thu Aug 3 16:03:15 2006 -0700 + + Make the sampler's payload be the WM payload rather than uninitialized data. + + The sampler's payload happens to be in the same format as the WM payload, + though most of the fields are ignored. + + This appears to fix the program in the presence of multiple PS threads. + +commit ad2c70b4121121f1fb53190ea49edf2323c804a9 +Author: Eric Anholt +Date: Thu Aug 3 12:47:19 2006 -0700 + + Remove some stale XXX-prefixed comments. + +commit f9e94c17c55e4c75802d8574c908744e286e7843 +Author: Eric Anholt +Date: Wed Aug 2 21:18:19 2006 -0700 + + Set the WM scratch space that we had already allocated. + + It appears to be required, even if the kernel doesn't use any scratch space. + +commit aefa6fdfc5300546caeb64ace14a7854d3dc7dae +Author: Eric Anholt +Date: Wed Aug 2 21:14:14 2006 -0700 + + Clean up GRF allocation (which was wrong at 16-register boundaries). + + Also use PS_MAX_THREADS rather than hard-coding 1 thread, and remove the dead + SF_KERNEL_NUM_URB macro. + +commit 7a64e14624514ef31f6fa9f15e8804c45f930212 +Author: Eric Anholt +Date: Wed Aug 2 20:48:13 2006 -0700 + + Crank down the SF allocation and comment on why this is a fine lower limit. + +commit bc6a2bb7576a7c1e7971f6d1e0b893b2ada1aaa3 +Author: Eric Anholt +Date: Wed Aug 2 20:34:57 2006 -0700 + + Remove the clip URB allocation. + + Previously, the VS was misconfigured and exceeding its allocation, which the + (unused) clip was providing padding for. + +commit defe2795429484ffe4c1438bafb86bb5e5469ba9 +Author: Eric Anholt +Date: Wed Aug 2 20:32:41 2006 -0700 + + Correct the VS setup, and allocate a correct, minimal number of URB entries. + + The VS number of URB entries and URB entry size are always used, even when + the VS is disabled. Similarly, the cache enable bit is always used. + +commit b57ccb682cb3dea3e26c6f1b0c709e63dfde0d31 +Author: Eric Anholt +Date: Wed Aug 2 19:46:15 2006 -0700 + + Replace the SF max threads setting with a define for easier tweaking. + + Tweak it to 1 for now. + +commit 82037a12758c41a304f2e0bbd033d3345cccbe1a +Author: Eric Anholt +Date: Wed Aug 2 19:33:28 2006 -0700 + + Remove CS URB allocation since we don't use any constants. + +commit 1d45668d7a42bfa5d7f5bfb68d8bae38bda0936b +Author: Eric Anholt +Date: Wed Aug 2 19:18:20 2006 -0700 + + We only need 3 vertices to fit in the URB, since we only dispatch 3. + +commit a076d35bed6f13cf943a0f8948176aa0c999e2da +Author: Eric Anholt +Date: Wed Aug 2 19:16:03 2006 -0700 + + No GS URB allocation is necessary when the function is disabled. + +commit befa655168fb8dcb6806592eb44f7ac49f191822 +Author: Eric Anholt +Date: Wed Aug 2 19:11:38 2006 -0700 + + Reduce URB_VS_ENTRY_SIZE to 1 as our vertices are under 8 floats. + +commit 33acbdca0a0f82725e5bf7887b325726403a6ffd +Author: Eric Anholt +Date: Wed Aug 2 19:09:19 2006 -0700 + + Remove the VS kernel and binding table. + + The VS URB entries have to remain as they're used to store the VF output which + isn't modified by a VS program. + +commit aafa48cb85cd03c735fb968a4275c19e1a68cd02 +Author: Eric Anholt +Date: Wed Aug 2 18:26:26 2006 -0700 + + Fix wm prog to correct the ordering of the Cr and Cb channels. + +commit bc2c842d93de04d48c7de60482814db346bd0b78 +Author: Eric Anholt +Date: Wed Aug 2 18:10:01 2006 -0700 + + Allocate space for the 965's state at the end of the video buffer. + + Fixes corruption in the first few lines of the video. + + Based on 1b506798d98d911be733543da2c40cb451a28912 + +commit 524460ea1f02bb6e8e2239d7763334666012cec4 +Author: Eric Anholt +Date: Wed Aug 2 17:47:55 2006 -0700 + + Updated WM kernel to load video and do colorspace conversion. + +commit ba896c779c697e1d7458028798ec49013bd9da9f +Author: Eric Anholt +Date: Wed Aug 2 17:47:37 2006 -0700 + + Updated grf/urb state for WM. + +commit e5c572f841b626b8b6f21a6966a33956d3b0b35b +Author: Adam Jackson +Date: Wed Aug 2 20:47:12 2006 -0400 + + Fix a braino in mode list pruning. + + Interpreting the size of the display in centimeters as the size in pixels, + and then clipping the modes list based on that, rarely does what you want. + +commit 21b62df7c34217be5dd95985c35e33be11c25846 +Author: Eric Anholt +Date: Wed Aug 2 17:36:49 2006 -0700 + + Move the WM kernel to a separate file. + +commit 5d3424492f9586a4c5a28962a9757f48f2c12e83 +Author: Eric Anholt +Date: Wed Aug 2 17:34:12 2006 -0700 + + Replace SF kernel with the one from broadwater-video HEAD. + +commit 7458a6adb5ea62f56bb3d4ab19ad7d1aa6ad2d19 +Author: Eric Anholt +Date: Mon Jul 31 10:09:17 2006 -0700 + + Move MAPSURF_XBIT settings into the texture formats structure. + +commit 7ea74843bbdbf54b6804727be9b41d26832c8f76 +Author: Eric Anholt +Date: Mon Jul 31 10:06:34 2006 -0700 + + Whitespace cleanup. + +commit e71108f1e05b7a8d8edd174eb64edd6cccacbcdc +Author: Alan Hourihane +Date: Fri Jul 28 10:32:12 2006 +0100 + + Fix DGA with MergedFB + Turn off rotation support when MergedFB enabled + +commit a91a4f95c664f6905fef61dab251707bf2548bb8 +Author: Alan Hourihane +Date: Thu Jul 27 16:11:48 2006 +0100 + + Fix pipe reversal for Xv + +commit ac3ad32f667b306e771617d784648f7111743f1a +Author: Alan Hourihane +Date: Thu Jul 27 15:28:42 2006 +0100 + + Calculate allowable refresh rates on the private + mode data for each independent screen in mergedfb. + + Lots of other fixes too. + +commit 30952e58ed83e2e18d1007f662d2cc9a773c876c +Author: Eric Anholt +Date: Wed Jul 26 13:42:12 2006 -0700 + + Limit drawing to the destination pixmap's boundaries, not the screen's. + + This shouldn't matter, as miComputeCompositeRegion shouldn't giving us + anything that would draw outside the bounds, anyway. + +commit cffd2cd36d0437b38ac8164d66ea71be50b19330 +Author: Eric Anholt +Date: Wed Jul 26 13:22:51 2006 -0700 + + Fix hangs when compositing with a mask. + + The modify bits in the mask field for sampler/map state appear to actually + be enable bits. So, prepare the state values in I915TextureSetup, + then write the sampler/map state out all at once in PrepareComposite. + +commit 96754b822df7ac110a70b2d08dda2ebb299772be +Author: Eric Anholt +Date: Wed Jul 26 13:19:12 2006 -0700 + + Fix a couple of typos from code review. + +commit e786e2f9f3a4df31702736db6f68a44c9ebba546 +Author: Alan Hourihane +Date: Wed Jul 26 16:45:38 2006 +0100 + + When detecting new monitors in mergedfb renew the modepool. + +commit 8e6e990db34d63174670512f494fa9adb44786f5 +Author: Alan Hourihane +Date: Wed Jul 26 10:48:47 2006 +0100 + + Update Xvideo to deal with MergedFB modes. + +commit e26f3e30b30a57ab4aad0267d689a9a5d7a5e877 +Author: Alan Hourihane +Date: Wed Jul 26 09:17:52 2006 +0100 + + Fix a build problem + +commit b919db75d2f6dc1019f981534b0d5d87c6029727 +Author: Alan Hourihane +Date: Wed Jul 26 09:07:19 2006 +0100 + + Bump to 1.6.1 + +commit 9c93d1498fa2363c52ef7fbe97d781560f67acf5 +Author: Eric Anholt +Date: Tue Jul 25 21:17:05 2006 -0700 + + Oops, partial revert of last commit. Some were obviously not NOOPS. + +commit 38d1a5e0dbe059f5c01bd5120a108a386ff10718 +Author: Eric Anholt +Date: Tue Jul 25 21:09:12 2006 -0700 + + Replace some OUT_RING(0)s with OUT_RING(MI_NOOP) to remind me why they're there. + +commit fd19b12793f09b6714468556ace875ef36ed9e1c +Author: Alan Hourihane +Date: Tue Jul 25 11:14:11 2006 +0100 + + Add mergedfb support to the intel driver with + additional pseudo-Xinerama support. + +commit aec88cf4c66833f89afa5f8fa4f8bcf30b2b6b4b +Author: Wang Zhenyu +Date: Mon Jul 24 15:46:19 2006 +0800 + + remove crap blit in UploadToScreen, we should find a more + efficent way and implement blit correctly. + +commit 32f1199937e92b9100aba52cbbb97157014e3182 +Author: Wang Zhenyu +Date: Mon Jul 24 15:42:15 2006 +0800 + + remove an extra '-' + +commit 02c5c4cd1dd44058d80ec23cccfd45a13bc3bb2c +Author: Wang Zhenyu +Date: Fri Jul 21 12:54:06 2006 +0800 + + add copyright info + +commit 4f0ad337098eb0bacb1c11bc61d780ac18041e1d +Author: Wang Zhenyu +Date: Fri Jul 21 11:59:04 2006 +0800 + + fixup segfault in xaa when xaa not initialized in i830WaitSync. + +commit 914327f40d07a3f7c069752ce005bf8e21352b03 +Author: Eric Anholt +Date: Thu Jul 20 17:58:07 2006 -0400 + + Disable drawing to PICT_a8, and turn on support for non-extended repeats. + + We don't know what COLOR_BUF_8BIT does, so it's disabled for now while we're + stabilizing the code. + + The non-extended repeats appear to be working according to the rendercheck + tests on a8 and a8r8g8b8 sources. Masks continue to hang the card, as before + this change. + +commit 45cb032e2b7ac1e4c765fc29a2e4dd0cef19066d +Author: Eric Anholt +Date: Thu Jul 20 17:34:50 2006 -0400 + + Use MT_8BIT_A8 so PICT_a8 expands to (0,0,0,a) not (a,a,a,a) + +commit fd6d825ae0780f3daf436f4224bf5f177cb8630e +Author: Eric Anholt +Date: Thu Jul 20 17:25:31 2006 -0400 + + Move ss6 setting with other immediate state, and ensure that stencil is off. + +commit d6d6a44c66446f34b57394e5ea9a8e32917f7569 +Author: Eric Anholt +Date: Thu Jul 20 11:23:05 2006 -0400 + + Try to fix up the basic RepeatNormal and RepeatNone support. + + With RepeatNone, access outside of the drawable should return 0 alpha values, + which is done by using the border color. For RepeatNormal, we use the wrap + mode (which requires that we use normalized texture coordinates). + +commit 2b2173c618c080b1678990d65fe49b52bd8001b4 +Author: Eric Anholt +Date: Thu Jul 20 11:15:18 2006 -0400 + + The pixmap's drawable x/y coordinates are always 0, so don't bother using them. + +commit 9f1cec83e0aef36c7d3482e62e8f01595f1fd076 +Author: Eric Anholt +Date: Thu Jul 20 11:05:49 2006 -0400 + + The vertex data are all floats, so write the dest coords as floats. + +commit 4737955a62c39177e7a7ce7749a2f20e111afc68 +Author: Wang Zhenyu +Date: Fri Jul 21 01:02:38 2006 +0800 + + move i830 default coord set into I830EmitInvarientState + +commit a7e30bb051bc03063fe699473610a57054a64973 +Author: Wang Zhenyu +Date: Fri Jul 21 00:56:58 2006 +0800 + + Take from i915, blend ctl code cleanup. + +commit ac34a37cb60d763cbd99b6e2f6fdcb639592b99b +Author: Wang Zhenyu +Date: Fri Jul 21 00:52:59 2006 +0800 + + Take instruction fixes into i830, with indent changes. + +commit 3e86bf4273241daa23645f5a8104913e4205a74b +Author: Wang Zhenyu +Date: Thu Jul 20 13:43:27 2006 +0800 + + remove i915 default ctx setup. + +commit 5c945bf9eb9f5bedd34d98dcc7abc3f1ea3cb962 +Author: Wang Zhenyu +Date: Thu Jul 20 13:40:39 2006 +0800 + + Revert "Fix several size error with STATE3D_LOAD_STATE_IMMEDIATE cmd." + + This reverts commit 433cb6ba82698676f6f72e09834aba4d64611d54. + +commit d5243d1b35ab1db608c81889819e4d4d87048154 +Author: Eric Anholt +Date: Wed Jul 19 19:27:53 2006 -0400 + + The height and width of texture maps are one more than the programmed values. + +commit 13e372c2095fde94ae41bea959fba0ad95a59c08 +Author: Eric Anholt +Date: Wed Jul 19 16:42:57 2006 -0400 + + Fix the texture map pitch setting as documented, and as used by the 3d driver. + +commit da5efb09d55291ce5bcabff7db8d1490bb5e838b +Author: Eric Anholt +Date: Wed Jul 19 16:36:52 2006 -0400 + + Fix the alignment padding fix (didn't bump BEGIN_LP_RING count). + +commit 36aa43bf73ee1268f0a250788eb637a4123f08eb +Author: Eric Anholt +Date: Wed Jul 19 16:22:46 2006 -0400 + + Force texture alpha channels to 1 if not present. + +commit adce6bd0fc9533156da09da7d029ba0d76606b4f +Author: Eric Anholt +Date: Wed Jul 19 16:21:49 2006 -0400 + + Add a trailing MI_NOOP to frag shader output for alignment if necessary. + +commit 4e409ea44180f7ef2780d70c9d2f54629bbd0fc3 +Author: Eric Anholt +Date: Wed Jul 19 15:57:09 2006 -0400 + + The map bits per pixel must come from the drawable, not the visible screen. + +commit 449e4be503c8b938d5bd46ee810244f8bcf54ceb +Author: Eric Anholt +Date: Wed Jul 19 13:34:06 2006 -0400 + + Correct the DWORD count of several 3D instructions. + +commit f1b62d890ca22e12d61f7ef67bc4e35d68cde019 +Author: Eric Anholt +Date: Wed Jul 19 13:02:24 2006 -0400 + + Replace hand register setting with new i915 fragmet program API. + +commit 76a316d0cec92a04c8735926a76e76c21f960d7e +Merge: 433cb6b 8480516 +Author: Eric Anholt +Date: Wed Jul 19 12:31:36 2006 -0400 + + Merge branch 'master' into exa + + Conflicts: + + src/Makefile.am + +commit baf65ce98abcdd21dff2531a43bb9c5044732c28 +Author: Eric Anholt +Date: Tue Jul 18 19:42:37 2006 -0400 + + Re-convert i915 video to new fragment shader API. + + Although in the history of this branch it had happened before, this time it's + for real. + +commit bb81e8d6c777a5e16b8193c07667fbee8e21203e +Merge: 2a1b3cf 8480516 +Author: Eric Anholt +Date: Tue Jul 18 19:23:21 2006 -0400 + + Merge branch 'master' into textured-video + + This moves the i915 textured video implementation into i915_video.c to avoid + conflicts in register definitions with i830_reg.h when we use i915_reg.h. + This also means that i810_reg.h's i915 3D regs definitions are removed and + replaced with i915_reg.h usage. + + Conflicts: + + src/i830_rotate.c + +commit 84805167ab8a422966355b9753bfcb4dad802413 +Author: Eric Anholt +Date: Tue Jul 18 18:27:10 2006 -0400 + + Convert i915 rotate code to the new fragment program API. + +commit 5176d62ba58c100c87f75a4f333d00129d780c99 +Author: Eric Anholt +Date: Tue Jul 18 16:18:18 2006 -0400 + + Add an API for programming i915 fragment programs. + +commit 148ef9bdd9e0ef3e7ac86b56a8662b53a3ea9168 +Author: Eric Anholt +Date: Mon Jul 17 22:32:25 2006 -0700 + + Convert magic numbers to symbolic names in i915 rotate code. + + This doesn't cover the fragment shader yet, which we need to make a sensible + set of macros for (at least the basic bits). + + Reviewed by: md5 + +commit 433cb6ba82698676f6f72e09834aba4d64611d54 +Author: Wang Zhenyu +Date: Tue Jul 18 17:00:50 2006 +0800 + + Fix several size error with STATE3D_LOAD_STATE_IMMEDIATE cmd. + Issue texture coord set with proper scale value. + +commit 855a9f13cb7fd4f6c489ff280bf389475bbd9bbe +Author: Wang Zhenyu +Date: Tue Jul 18 10:02:47 2006 +0800 + + fallback in 'repeat' case for now + +commit a6d438ebe3cf141a0331e0cd55eb9b5e137a5e37 +Author: Keith Packard +Date: Mon Jul 17 14:11:19 2006 -0400 + + Disable spread spectrum clock usage. + + The spread spectrum clock generator that improves EMI characteristics for + laptop screens lives in an external chip that is programmed over an i2c bus. + Without correct programming, attempts to use this mode for the LVDS can + result in a DC signal being sent to the panel. + + Until we find programming information for this external chip, we should + leave this mode disabled. + +commit 16d6263e6518a4a05562e2842ff2d0fdb4710304 +Author: Alan Hourihane +Date: Sun Jul 16 20:39:52 2006 +0100 + + whoops, reverse part of that. + +commit 2f50f6d1b1b3fa4fbec98bd8fa5818df890070e7 +Author: Alan Hourihane +Date: Sun Jul 16 20:17:38 2006 +0100 + + move ContextMem out of XF86DRI + +commit c7083a267209c93b2a91ef00dea2ca840400d160 +Author: Eric Anholt +Date: Fri Jul 14 13:23:40 2006 -0700 + + Bug #7404: Only save/restore VGA fonts and not other VGA regs. + + This fixes a hang on the i945 during restore. It appears that saving/restoring + the VGA registers is not important, as we're correctly saving/restoring the + registers we touch within the driver anyway. + +commit 49b827605628d3e1a6d4d41447cf46c5f38cc0c2 +Author: Eric Anholt +Date: Fri Jul 14 14:23:04 2006 -0700 + + Add a register restore implementation so we don't crash on LeaveVT. + + We shouldn't ever need to save/restore the hi/lo frequency regs, as they're + read-only. + +commit 6a92a779646ec03a03a3b1f45170b2e705ce8934 +Author: Eric Anholt +Date: Fri Jul 14 14:20:41 2006 -0700 + + Don't try to probe on more pipes than we really have. + +commit 04d1584737fd0d14e99608a97281fd7b1549ae0e +Author: Wang Zhenyu +Date: Fri Jul 14 16:14:18 2006 +0800 + + Current exa render implement for i830 and i915, test on + 865GM and 915G. There is issue in picture 'repeat' support. + And also stop recursive behavior in I830WaitLpRing to allow + server to abort instead of system hang. + +commit de470aaf5c47f4d2b0f477ac678039ef43af773d +Author: Adam Jackson +Date: Thu Jul 13 19:10:11 2006 -0400 + + In I830xf86SortModes, catch cases where two modes are equal in only one + dimension, by comparing the areas of the modes. Otherwise, 800x600 would + sort before 1024x600 if it was added later. + +commit 22843830ebdd14247aa76d19f89494a56e2ac887 +Author: Adam Jackson +Date: Thu Jul 13 17:20:17 2006 -0400 + + Fix a thinko; would only inject the FP native mode if a mode list was already + found, which is never the case when there's no xorg.conf. + +commit 05bcbadd130524694e11e372d54cb419cea566cc +Author: Eric Anholt +Date: Tue Jul 11 14:05:38 2006 -0700 + + Avoid NULL dereference if cursor position changes during a mode change. + +commit b65f18b05a5fba506b71293b495cab95197037ac +Author: Eric Anholt +Date: Tue Jul 11 13:29:57 2006 -0700 + + Bug #7443: Respect the user's Modes configuration, and make it more useful. + + Now, mode names generated by DDC get names of the form "WIDTHxHEIGHTxREFRESH". + The matching for user Modes lines takes the user Modes as the prefix that + needs to match, rather than an exact string match or "WIDTHxHEIGHT" match. So + one can, for example, specify "1024x768" to get any old 1024x768, or + 1024x768x60 to get one of the modes named 1024x768x60. + +commit 5a2e04bd1b700a8a6e26136b8831ef5e4d11b565 +Author: Eric Anholt +Date: Tue Jul 11 10:21:51 2006 -0700 + + Fix crash with DDC when there are no user modes to add. + +commit f9499a68da0ce459fed0b29b998678fd81898a51 +Author: Luká\u0161 Hejtmánek +Date: Tue Jul 11 10:13:18 2006 -0700 + + Make gamma settings apply to the cursor as well, and fix clone-mode gamma. + +commit 7068468ac1951bfca0071bb9b1a99df4f37368a0 +Author: Luká\u0161 Hejtmánek +Date: Tue Jul 11 09:51:26 2006 -0700 + + Add support for adjusting saturation value of overlay video. + +commit b1c2ea653502dd8547079e7014b698f241433dff +Author: Alan Hourihane +Date: Tue Jul 11 08:13:30 2006 +0100 + + whoops, revert some unnecessary changes + +commit 8a44a7acfcadbba2410dca750afc9d32bc83706e +Merge: 584b544 e7723a4 +Author: Alan Hourihane +Date: Tue Jul 11 07:41:27 2006 +0100 + + Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/driver/xf86-video-intel + +commit 584b544987be5cf23dce29ddaf3130e59cfe6fa8 +Author: Alan Hourihane +Date: Tue Jul 11 07:40:40 2006 +0100 + + Add an additional check before rotating + +commit b912bf5673e38e03b0b25c2f5d05fe7e26994ba1 +Author: Eric Anholt +Date: Mon Jul 10 18:35:20 2006 -0700 + + Clean up warnings in sil164 module. + +commit d75490701cdbf2ab6eab82eaa078790a5fe0aea0 +Author: Eric Anholt +Date: Mon Jul 10 18:21:04 2006 -0700 + + Hook up SiI164 mode setting (just a matter of turning the chip on). + + Also adds register dumping in case this turns out to not be enough, and fixes + a couple of prototypes. + +commit 426d26ea446d646fa8f561ea0e03c8e4a2c0c315 +Author: Eric Anholt +Date: Mon Jul 10 18:19:51 2006 -0700 + + Fix prototype for SaveRegs. + +commit 8d7987d00242020d29a2574ac0c8b6e55cc22112 +Author: Eric Anholt +Date: Mon Jul 10 17:34:57 2006 -0700 + + Move to 4-space indents in sil164. + +commit f5a01a2ef02125611d5fb74c20d53d52e544701a +Author: Eric Anholt +Date: Mon Jul 10 17:17:51 2006 -0700 + + Make DVO code light up my sil164-based DVI output, when already set up by BIOS. + +commit 23a0ee73bce12f9e0b881af420413aeec4c0517f +Author: Eric Anholt +Date: Mon Jul 10 17:16:18 2006 -0700 + + Fix modelist with a configured monitor to not begin with all unvalidated modes. + +commit 48ba9273ddfb36d3525e19238b94b18c56667c4d +Author: Eric Anholt +Date: Mon Jul 10 15:01:51 2006 -0700 + + Fix validation when the first mode is thrown out, and print hsync in modelines. + +commit 3924ffb7d7b71cb9c6ab9eeb12d0f1b2c26244c0 +Merge: 5a8f6a4 f76f94a +Author: Eric Anholt +Date: Mon Jul 10 12:12:38 2006 -0700 + + Merge branch 'dvo-merge' into modesetting + + Conflicts: + + src/i830_driver.c + +commit f76f94a743505da16e121992eb789c1f74eb7673 +Author: Eric Anholt +Date: Mon Jul 10 12:04:09 2006 -0700 + + Supply proper NULL-terminated symbol lists to avoid crashing. + +commit 5a8f6a486d79f50d2d659e615283289d59f9caa4 +Author: Eric Anholt +Date: Sat Jul 8 15:26:19 2006 -0700 + + Improve output bus setup to include LVDS setup for pre-i915. + +commit df333cc9a848bc2299a52a7613fe4ffdff8038a2 +Author: Eric Anholt +Date: Fri Jul 7 13:41:33 2006 -0700 + + Initial add of DVO support code. Probes my sil164. + + This is a mostly-untested merge of airlied's work. The I2C modules are intended + to be moved into the core server or a separate driver module when they're + functional and we're happy with the API. + +commit e1064f52b0ff69ea7937897b8c951cc3e32cd752 +Author: Eric Anholt +Date: Wed Jul 5 16:00:03 2006 -0700 + + Don't try to probe modes on an SDVO device with NULL sdvo_drv. + +commit ffa6ecc18bc54151061d9956f1d12575fc057da3 +Author: Eric Anholt +Date: Wed Jul 5 14:41:08 2006 -0700 + + More fixes to "choose closest mode for the pipe" code to select correct refresh. + +commit dfd7fef457c048c9f0d826e37d91453d9e1485b9 +Author: Eric Anholt +Date: Mon Jul 3 12:01:57 2006 -0700 + + Bug #7375: Don't double-free the current XF86 mode after a randr reprobe. + +commit 5d07ebdf4f23e16fb8f60eafeadc947701e7877c +Author: Eric Anholt +Date: Mon Jul 3 11:59:21 2006 -0700 + + Only override display size with the XFree86 mode's for actual panel scaling. + +commit 48f27ac62128251640a9b1ca54f63376676b47eb +Author: Eric Anholt +Date: Wed Jun 28 15:07:01 2006 +0200 + + Replace i830InjectModes with i830DuplicateModes usage. + + The remaining functionality of DuplicateModes was OBE, and the name was bad. + +commit ce5bd108c55d2378db072617c380514a39672603 +Author: Eric Anholt +Date: Wed Jun 28 14:21:49 2006 +0200 + + Validate and insert user and VESA standard modes for DDC or configured fallback. + + This isn't really tested because I lack a good CRT to test against currently. + +commit 367f69f8e7710e53dcd286f1b62506a3276e80f9 +Author: Eric Anholt +Date: Wed Jun 28 13:10:02 2006 +0200 + + Replace xf86ValidateModes usage with a set of custom validators and pruning. + + This moves us to maintaining MonPtrs per pipe instead of using the EDID + structure "xf86MonPtr", which is closer to what we want to be looking at when + doing validation. The new validation isn't enough yet -- particularly, we + aren't importing and validating the custom modelines to the pipes when + applicable, but this will be easier than (for example) trying to make flat + panel modes pass xf86ValidateModes through various gross hacks. + + Hotplug turn-on/off also happens at SwitchMode time now, instead of at randr + probe time. + +commit 9fbd3d8f4befb75ed6f6bd9a9ffe0175626e8785 +Author: Eric Anholt +Date: Tue Jun 27 23:31:40 2006 +0200 + + If the panel power registers are all zeroes on Mobile parts, disable LVDS. + + This is the case on the Mac mini, which is an i945GM but has no LVDS attached. + Powering on with the power timing registers zeroed would probably be a bad idea, + even if there was a panel attached. + +commit 56f7aedd0ad1f5645a90a5509b1263ec6b7b7ee1 +Author: Eric Anholt +Date: Tue Jun 27 00:37:56 2006 +0200 + + Fix randr current mode reporting and mode loss/mis-configuration on re-randr. + +commit b85f268051a785f90e4c55bd1cac80d673388f16 +Author: Eric Anholt +Date: Mon Jun 26 16:26:58 2006 +0200 + + Fix remaining warning. + +commit 6a3f89f4b6035534c7b93a4c05fd704305349785 +Merge: 3cdc537 e7723a4 +Author: Eric Anholt +Date: Mon Jun 26 16:25:58 2006 +0200 + + Merge branch 'master' into exa + + Conflicts: + + src/i830.h + +commit 3cdc53797bf6fdbfbcb53e07b269a5071f5ec97d +Author: Eric Anholt +Date: Mon Jun 26 16:23:55 2006 +0200 + + Fix build with new EXA headers. + +commit e7723a4e5725147d3bd9ba22c5a3314b0556e440 +Merge: 5111b88 dae9cb7 +Author: Eric Anholt +Date: Mon Jun 26 16:04:33 2006 +0200 + + Merge branch 'origin' + +commit 7104b915da412a26661bab7b5a940e935e8cbc8a +Author: Eric Anholt +Date: Mon Jun 26 15:11:13 2006 +0200 + + Clean up warnings. + +commit 21dc3edfc41987bb8cf0f8d265fba9775cbe8cdb +Merge: f113e90 5111b88 +Author: Eric Anholt +Date: Mon Jun 26 15:06:42 2006 +0200 + + Merge branch 'master' into modesetting + + Conflicts: + + src/i830.h + +commit 5111b883480a5a9cc82200f2684cba67b515aa73 +Author: Eric Anholt +Date: Mon Jun 26 14:53:10 2006 +0200 + + Turn on extra warning flags for GCC, and clean up the resulting fallout. + +commit f113e9002cf53510e30984f816d44b06f1e71216 +Author: Eric Anholt +Date: Mon Jun 26 12:54:30 2006 +0200 + + Fix the plane/pipe disabling and turn off missing outputs when no longer DDCed. + +commit 0e5cda3796ba0164496f0814eb57d1dfa7ab9257 +Author: Eric Anholt +Date: Mon Jun 26 10:30:46 2006 +0200 + + Fix FP scaling by using the desired mode to get at the real [HV]Display. + +commit 51d14f803aae6d0a738520c3cad110289ee444db +Author: Eric Anholt +Date: Mon Jun 26 10:21:23 2006 +0200 + + Add a function to turn off unused outputs, DPLLs, planes, and pipes. + +commit d2c18d8d79596513149273e4a0d322f04bf27e80 +Author: Eric Anholt +Date: Mon Jun 26 10:15:11 2006 +0200 + + Fix DDC probing after last (untested) commit. + +commit 6d1d105d68d9c25890c3fd2ebad1367529c2a991 +Author: Eric Anholt +Date: Mon Jun 26 10:14:27 2006 +0200 + + Unset pipe current mode on EnterVT, so we reprogram the mode for sure. + +commit 52e8231a19f28bd4744f983aee2197a18c20aa3a +Author: Eric Anholt +Date: Mon Jun 26 07:46:28 2006 +0200 + + Major cleanup of mode reprobing: + - Don't mess with pScrn->monitor->Modes, and instead make our own availModes. + - Don't re-program the pipe with the same values (no flicker at xrandr) + - Move a bunch of stuff that should be exposed through the public API (probably) + to i830_xf86Modes.c + - Use a table with established modes plus GTF to come up with modes from EDID, + instead of trying to walk and find one in pScrn->monitor->Modes. I think + this is correct. + - Reset clone state if we've detected new pipes, which should turn on the + cursor. + +commit f5e5f8aeddb3e0d6d073471aeff6176fb54576e2 +Author: Eric Anholt +Date: Fri Jun 23 23:29:55 2006 -0700 + + WIP to allow re-probing and validation of modes for new heads at "xrandr" time. + + Now, DDC modes always end up being preferred to custom modelines, even if + smaller. This should probably be fixed by inserting custom modelines into + the probed mode list if they're valid according to the probed parameters of the + monitor. + + Too much code is lifted from static functions in xf86Mode.c, and those should be + made unstatic if possible. Using xf86ValidateModes is also rather hacky, and + I want to break the function down, but this is a first step. + +commit 89791914d2a78f19f4f60ca370d387e5b1ccfb46 +Author: Eric Anholt +Date: Fri Jun 23 18:21:17 2006 -0700 + + Split probed modes out per pipe, and union them into the available modes. + + This is the first stage of getting runtime monitor attachment. The old i830 + GTF code is returned to use to provide suitable modelines for xf86ValidateModes + in the LVDS case, even though the LVDS doesn't care about the modeline and just + always programs its fixed values. + +commit dae9cb7712d5d8f88697ca83808c59af08364c0e +Author: Alan Coopersmith +Date: Thu Jun 22 15:07:16 2006 -0700 + + Provide definitions of __FUNCTION__ for non-gcc compilers + +commit bb4810521633b6c3db2fc7d01ddc71325583d265 +Author: Eric Anholt +Date: Thu Jun 22 09:38:27 2006 -0700 + + Move FP mode validation next to other mode validation code. + +commit 66d9a1be302ad34573de98de21cbdf6419592092 +Author: Eric Anholt +Date: Wed Jun 21 17:11:54 2006 -0700 + + Detect SDVO display presence at startup and default to displaying to it, too. + +commit 72e25a7488c2eabcc92e9e0769a89dee687f52fd +Author: Eric Anholt +Date: Wed Jun 21 16:04:18 2006 -0700 + + Fix SDVO output at low pixel clocks. + + I had interpreted the docs as saying that the multiplier setting would further + divide the clock and stuff dummy bytes in. Instead, we have to set the DPLL at + the higher clock rate, and the pixel multiplier just controls the stuffing of + dummy bytes. Also, we have to set the multiplier both in the graphics chip and + on the SDVO device on the other side. + +commit 726443309d72134341cff1f6db978aa1d6e3ce52 +Author: Eric Anholt +Date: Wed Jun 21 15:38:19 2006 -0700 + + Add decoding of SDVO command names for debug output. + +commit 5a1b68993f3a3a2e8dcd428a7118e29c36703cd6 +Author: Alan Hourihane +Date: Wed Jun 21 08:41:16 2006 +0100 + + Fix build without DRI + +commit 16b310823bacab6be4947da234b3a081b0a3cd62 +Author: Matthieu Herrb +Date: Wed Jun 21 00:12:27 2006 +0200 + + Fix build without DRI + +commit 896ffe78fe96469cdd3ade77c8e68e1503967223 +Merge: 89c2c4b 52243d4 +Author: Eric Anholt +Date: Tue Jun 20 15:10:35 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit 89c2c4bc40b8c032915ccb3ed4f3c143c3d8db12 +Author: Eric Anholt +Date: Tue Jun 20 15:10:19 2006 -0700 + + Add #if 0-ed code I've been using for CRT detection debugging. + +commit be08661e3126907c50c54485042fcde00b0da2b4 +Author: Eric Anholt +Date: Tue Jun 20 14:48:03 2006 -0700 + + Only default to enabling CRT or LVDS output if they're actually detected. + + Still, if we haven't detected any outputs automatically (including CRT through + DDC), default to CRT anyway. + +commit b454c9601f005c69c11556a558150403378d34d9 +Author: Eric Anholt +Date: Tue Jun 20 14:32:40 2006 -0700 + + Add support for CRT detection using DDC. + + This method is slower (~5ms), but works on older chipsets. Also, load-based + detection is disabled, as it can be fooled by other outputs on the pipe being + active, such as LVDS. + +commit 0b76646666e9d330e77c6f81af8b91e34623be92 +Author: Eric Anholt +Date: Tue Jun 20 13:57:26 2006 -0700 + + Add CRT detection function by testing for load, and clean up hotplug version. + +commit e4584a4f44a70d746396ed48b8e40033504d68b2 +Author: Eric Anholt +Date: Tue Jun 20 10:39:28 2006 -0700 + + Remove dead DisplayInfo option. + +commit ab60e34dcfc52ab5f22a82145d5b4db51b4c62c5 +Author: Eric Anholt +Date: Tue Jun 20 10:07:47 2006 -0700 + + Add debugging info for pipe/display plane size. + +commit 8a6edba33213911cc2210b5e903428b81d45862f +Author: Keith Packard +Date: Mon Jun 19 13:47:28 2006 -0700 + + Set vblank interrupt configuration to match pipe configuration + + New i915 drm ioctl (in version 1.5) allows the X server to select + which pipe drives vblank interrupts. Use this to drive from the 'preferred' + pipe. Yes, per-window vblanks would be nice in a shared fb environment. + Maybe someday. + (cherry picked from 2fb375b665f4802819b89f2277fd6154006c11ee commit) + +commit 52243d407cad93283956660de4771097ac0b4b2d +Merge: 2fb375b 34f6a82 +Author: Keith Packard +Date: Mon Jun 19 13:28:09 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit 2fb375b665f4802819b89f2277fd6154006c11ee +Author: Keith Packard +Date: Mon Jun 19 13:24:57 2006 -0700 + + Set vblank interrupt configuration to match pipe configuration + + New i915 drm ioctl (in version 1.5) allows the X server to select + which pipe drives vblank interrupts. Use this to drive from the 'preferred' + pipe. Yes, per-window vblanks would be nice in a shared fb environment. + Maybe someday. + +commit b5acc6b3a3a3a109014d6b971f4722d0f0a4c29a +Author: Keith Packard +Date: Mon Jun 19 13:22:17 2006 -0700 + + Add backlight control to DPMS logic. + + Turn backlight on and off in response to DPMS state changes. + +commit d7e5d996aa123e52857362fa8a1e69f709bfe218 +Merge: 89a5a00 a73ab7f +Author: Wang Zhenyu +Date: Tue Jun 20 01:22:53 2006 +0800 + + Merge branch 'master' into exa + +commit a73ab7f0e6e3b0462e05c0031ffd602ed3e2bcd4 +Author: Alan Hourihane +Date: Mon Jun 19 11:35:42 2006 +0100 + + additions for rotation fixes + +commit 1fe3dd38eb613475d62140850e64767defed7d34 +Author: Alan Hourihane +Date: Mon Jun 19 11:27:28 2006 +0100 + + Set some invarient state, cures some problems with + rotation at startup. + + This mimicks the 3D drivers setup. + +commit 89a5a0024a7e077a0726ffe1427e573df3bcbef5 +Author: Eric Anholt +Date: Sun Jun 18 00:25:34 2006 -0700 + + Fix crash with EXA during randr, when XAA structures were being accessed. EXA + shouldn't have any issues with there also being pixmaps in framebuffer while + rotation is active. + +commit f2ab3aa3199e1c4b0edec72b5acea6d725cc514a +Author: Eric Anholt +Date: Sun Jun 18 00:32:01 2006 -0700 + + Fix DRI in EXA mode: Don't attempt to use XAA symbols (use the driver's internal + ones for EXA support when available). Also, add an abstraction of XAA/EXA + MarkSync and WaitSync functionality so we don't need to sprinkle the ifdefs all + over, and correctly use them. + +commit 3592b432b48d51d2273c1e1064f85e656fbba130 +Author: Alan Hourihane +Date: Tue Jun 13 21:42:53 2006 +0100 + + fix 8bpp & 16bpp rotation modes for i8xx + series chips + +commit a50610b7719bfe800c3496c17d0ba77739167b35 +Author: Alan Hourihane +Date: Mon Jun 12 13:53:20 2006 +0100 + + Use 800x600 mode to double check + +commit f02268b2091c9a785d26e82bcb35a8b713463072 +Author: Alan Hourihane +Date: Mon Jun 12 12:16:58 2006 +0100 + + Don't rely on register check to find out + if we're resuming - it's not reliable. + + But then, neither is the BIOS, but it's + the best we can hope for until Eric's work + is complete. + + Try setting another mode to cater for some + broken BIOS' too. + +commit 672c3d18dbb405095e465126053ff887d891409e +Author: Alan Hourihane +Date: Mon Jun 12 10:02:06 2006 +0100 + + Only mark rotation flags after initial screen setup. + Fixes bug #7053 + +commit 34f6a8204f1edec015283fc6b5f196e47897e3de +Author: Keith Packard +Date: Sun Jun 4 00:15:06 2006 -0700 + + Get sDVO output working on mac mini. + Add lots of register debugging to track delta from BIOS settings. + Fix various mode settings to mirror BIOS sDVO values. + Disable analog/lvds output on pipe with sDVO. + Borrow Dave Airlie's I830xf86ValidateDDCModes code. + Fix various sDVO I2C messages to mirror Dave's code. + +commit 6812b5382077e5d3f421aceeeb2f337e9b3f570e +Author: Dave Airlie +Date: Fri Jun 2 12:22:14 2006 +1000 + + intel: fix VT switch DRI locking + + The DRI locking is incorrect at VT switch, due to reference counting + inside the driver. Just call the DRI directly. + +commit 3f158fd610a3363a23daa7205bcd9f213686cf1c +Author: Keith his master's voice Packard +Date: Mon May 29 18:05:57 2006 -0700 + + Nice texture coordinate gradient, broken slightly in y + +commit bb0ad04d46eba2fed57a888ff960d2436ec7d70d +Author: Keith his master's voice Packard +Date: Sun May 28 22:59:58 2006 -0700 + + Ok, finally something sensible up on the screen. + Replace PS kernel with constant data source (pink). + Dodge g0/g1 so URB data doesn't land on top of thread data. + Flip source/dest coordinates (dunno why they're fetched this way). + +commit ddf3e5b2737399dca6d401f91db51a51f93b6373 +Author: Keith his master's voice Packard +Date: Sun May 28 21:03:39 2006 -0700 + + Using tiny rectangle, still locks up in pixel shader program somehow + +commit 2e16c79dc2f24b0a04111aa6236a44870c6c64df +Author: Keith his master's voice Packard +Date: Sun May 28 20:31:23 2006 -0700 + + Lots more debug code. Appears to execute pixel shader thread now though. hurray! + +commit 79a514412bda7e38e018c105a603970c4a9d758a +Author: Keith his master's voice Packard +Date: Sun May 28 16:09:59 2006 -0700 + + dump out piles of debug. Create VS thread just to see how it works + +commit 9c111d89fe19f1773af2eefb000e1c2389b4b6e1 +Author: Keith his master's voice Packard +Date: Sat May 27 19:52:13 2006 -0700 + + Push all of the obvious Mesa state setting into the video code + +commit 01101196b16010ac3dadab647bfe7000a53fa94d +Author: Keith his master's voice Packard +Date: Sat May 27 01:05:09 2006 -0700 + + flesh out cc state. set cull mode to none. enable sf kernel + +commit 462a860af89ed855fe2b718342fcaf9c169af3fb +Author: Keith his master's voice Packard +Date: Sat May 27 00:17:25 2006 -0700 + + Rename BRW instructions, check video instruction generation. Doesnt lock up, but doesnt display anything either + +commit 9ec7cf22e3f03c13524bb2d15711699dfcc02984 +Author: Keith his master's voice Packard +Date: Fri May 26 21:30:55 2006 -0700 + + Use broadwater video code on broadwater hardware. Pad ring to even length. compute state base as address rather than offset + +commit f5fe700b9a943c956bcfcc3a0d2de13c23b978bc +Author: Keith his master's voice Packard +Date: Fri May 26 13:47:39 2006 -0700 + + Prepare real SF kernel and fake WM kernel + +commit 1549accb6f52498fef3dcbd87bb72d89fcd5bccd +Author: Keith his master's voice Packard +Date: Thu May 25 16:10:31 2006 -0700 + + Scale video source vertices. Allocate space for kernels + +commit c1c46f882f9a11c383c8d1d1ce393be8fda55ed0 +Merge: 1e2da24 f2967a2 +Author: Eric Anholt +Date: Mon May 22 10:42:24 2006 -0700 + + Merge branch 'master' into modesetting + + Conflicts: + + man/.gitignore + +commit 1e2da2450d7213c0aa4d4bd1fba5723dcda13ddf +Author: Lukáš Hejtmanek +Date: Mon May 22 09:48:09 2006 -0700 + + Replace VBE call to do DPMS with native code, and fix screensaver in clone mode. + +commit 2a1b3cfccb7de53f7ce8f9e4816e4278afb1fcab +Author: Eric Anholt +Date: Mon May 22 10:32:13 2006 -0700 + + Use RECTLIST instead of TRIFAN for video so we get horizontal shearing instead + of diagonal. Also remove the unnecessary vertex elements that were being + emitted. + +commit bc42dbe07cbd61b357d8eed02608e026c4cf4485 +Author: Wang Zhenyu +Date: Mon May 22 11:22:03 2006 +0800 + + fix a typo + +commit bce209cd3f60cb5d51aadc5fc8ec1a4151435ec3 +Author: Eric Anholt +Date: Fri May 19 17:13:37 2006 -0700 + + Put in code for idling accelerator on subsequent cliprects. + +commit 3640117bd9f2073ff54dc474f0cdefff49742584 +Author: Eric Anholt +Date: Fri May 19 17:10:04 2006 -0700 + + Set up the state buffer in framebuffer. + +commit e70d99d51edc39ea53536c2f4d62ac622ba3e0d9 +Author: Wang Zhenyu +Date: Fri May 19 15:47:19 2006 +0800 + + revert wrong setting for memorySize, which should + be at the range of pI830->Offscreen. + +commit de06cd70a9edb8b56d05d3f505137f7c7f083c2f +Author: Eric Anholt +Date: Thu May 18 18:27:11 2006 -0700 + + Checkpoint for filling out more 3D state. + +commit ad7ec6a24b436d5492d38e4fa56845b229cf5fb8 +Author: Eric Anholt +Date: Thu May 18 15:26:28 2006 -0700 + + Checkpoint of BW textured video work, filling out vertex submission stuff and + some more other state. + +commit 291770efc691a02650e3c580ca40c2f9fce3896c +Author: Eric Anholt +Date: Thu May 18 10:43:07 2006 -0700 + + Start laying out some of the bits that need to be done for BW textured video. + Headers taken from TG code drop. + +commit b3d79ad9ecc70e9f841092fc75b7e23576b685dd +Author: Wang Zhenyu +Date: Thu May 18 16:31:40 2006 +0800 + + oop I830FALLBACK define error + +commit 1bc2a8f7a20b2ea9251e93157c0f2342fdbb951c +Author: Dave Airlie +Date: Thu May 18 16:58:22 2006 +1000 + + fixup I830SDVOGetActiveInputs to use return values not args + +commit 33ad959323f70f76c494c66ec35a04d7d839f612 +Author: Wang Zhenyu +Date: Thu May 18 11:32:59 2006 +0800 + + Add DEBUG_I830FALLBACK for easier tracking + +commit 52af679c94a25c0c6e5df5f3647f62fdd256c826 +Author: Wang Zhenyu +Date: Thu May 18 11:31:14 2006 +0800 + + Check alignment require in PrepareSolid, noticed by Eric, + as pixmap offset align set is violated in Solid. + +commit fdb52a8c6da0f3d3f4cfbf1583b2dc4d91f7e933 +Author: Wang Zhenyu +Date: Thu May 18 11:24:46 2006 +0800 + + Solid planemask in PrepareSolid/Copy might be 0xffffffff + or bits up to the depth. This should save some fallback + case, noticed by Eric. + +commit bc51d6525a12c748d0a293b7e560f6dcea33eecb +Author: Eric Anholt +Date: Wed May 17 13:42:51 2006 -0700 + + Turn off overlay video on BW until we have stable PCI IDs so we can know whether + the hardware supports overlay. + +commit f97895efd5532cca145b6f224f9615739b1e8f26 +Author: Dave Airlie +Date: Wed May 17 14:46:37 2006 +1000 + + fixup chipid override + + This makes the ChipID override work so that we actually override the pci id + that gets used everywhere in the driver. + +commit 011a1c99d49c1c69b5fa81ade6a2ed73e84276ae +Author: Wang Zhenyu +Date: Wed May 17 11:16:00 2006 +0800 + + Fix memorySize to enable offscreen mem manage. + +commit b0ac5303f33f75dc607cf0c705c23db1da836983 +Merge: 4c72725 c2cd10e +Author: Eric Anholt +Date: Tue May 16 15:21:17 2006 -0700 + + Merge branch 'textured-video' into broadwater-video + + Conflicts: + + src/i830_video.c + +commit c2cd10e1fba0e75c0ed3db5d17211bddf7ab1e33 +Author: Eric Anholt +Date: Tue May 16 10:08:58 2006 -0700 + + Flag the 3D state as dirty when we draw textured video, which should help + + rotation (I have other issues with rotation anyway). + +commit 63a72e46fa20a4a4ba74efed386f6c3c167be5b5 +Author: Eric Anholt +Date: Tue May 16 08:54:43 2006 -0700 + + Turn debugging back off. + +commit 01c043de0393170e98515169f8239fef4d3e2053 +Author: Eric Anholt +Date: Tue May 16 08:53:40 2006 -0700 + + Use linear min/mag blending. + +commit db3683907d15959e79adfb8f0cd94e861fae5c36 +Author: Eric Anholt +Date: Tue May 16 08:40:53 2006 -0700 + + For textured video, disable double buffering and sync before uploading new video + + data. Allows more videos to play simultaneously. + +commit 29a8e88ed01c9e15a2ceba5eb62b19773e14c1f8 +Author: Eric Anholt +Date: Mon May 15 17:19:33 2006 -0700 + + Relax the alignment requirements for textured video. + +commit c9be11459bc2198b435c97c5a3432425246c4d2d +Author: Eric Anholt +Date: Mon May 15 17:04:27 2006 -0700 + + Enable overlay and/or textured video at runtime according to hardware + + capabilities. Sets up 16 textured-video ports. Left in one hack (disconnected + but advertised BRIGHTNESS and CONTRAST atoms) which may actually not be + necessary. + +commit f268979a0c779641c84e8d5b763acbda131474cf +Author: Eric Anholt +Date: Mon May 15 10:05:19 2006 -0700 + + Correct drawing issues with planar formats when top or left != 0, and Y didn't + + get its offset. + +commit b09fd42d7088ead6c23e040ac4b71114f62de82b +Author: Eric Anholt +Date: Mon May 15 09:29:43 2006 -0700 + + Fix the planar formats to display correctly in textured mode. Still has issues + + with clipping, and some sampling differences between ximagesink and xvimagesink. + +commit dd48790f4600a880fc4907c6e3b1cd51e9c0f0b7 +Author: Eric Anholt +Date: Fri May 12 13:27:33 2006 -0700 + + Divide width by 2 in planar-to-packed conversion loop, since each pass through + + the loop writes two source pixels. + +commit eec5e996ec9361099bf81d8d3b66933d5981c5a8 +Author: Eric Anholt +Date: Thu May 11 20:26:26 2006 -0700 + + Merge textured-video-wip to textured-video-planar-full. + +commit 4154a2f74811b91c0ef5bef32a919d6f8baf1a70 +Author: Eric Anholt +Date: Wed May 10 12:09:00 2006 -0700 + + Experimental work to use a full pixel shader for planar to YUV conversion, which + + also doesn't quite work. + +commit 3e0a9c9082942eb6f52612235d84b8408e1e03e9 +Author: Eric Anholt +Date: Tue May 9 16:57:19 2006 -0700 + + Do a separate BEGIN/ADVANCE_LP_RING set in the planar vs packed blocks, so I + + can adjust the planar code more easily. + +commit 3af4a967e73b367bb531f2760b4803db1388bcf9 +Author: Eric Anholt +Date: Tue May 9 16:50:48 2006 -0700 + + Add a couple of macros to simplify writing of video pixel shaders. + +commit 06e62ec521ed3f7ed232ace8e188891bedb53097 +Author: Eric Anholt +Date: Tue May 9 12:04:58 2006 -0700 + + Commit a WIP implementation of the planar video shader that does the + + planar-to-packed conversion for us. Unfortunately the documentation is unclear, + and I haven't managed to get any implementation of it working correctly. + +commit b1090a42b200710628dd8b0c7ced15db7bbe71a1 +Author: Eric Anholt +Date: Mon May 8 14:22:00 2006 -0700 + + More magic number reduction in rotation code. + +commit 3a2d8af214a79591322ce6e5546f856a1ee41736 +Author: Eric Anholt +Date: Mon May 8 09:42:40 2006 -0700 + + Add initial textured XV support for i915, which can do YUY2 and UYVY, but fails + + on I420 and YV12 currently, doesn't support the composite extension, and should + break XV support on non-i915. + +commit 66875c1559bc20b531ab72e5d6b921d9f50b29f3 +Author: Eric Anholt +Date: Fri May 5 10:15:23 2006 -0700 + + Convert magic numbers in i915 rotation 3D state to symbolic names. + +commit 4c727254da354cfd6f35148a334d046d67a50e99 +Author: Eric Anholt +Date: Fri May 12 16:26:58 2006 -0700 + + Remove the local, renamed copy of lnx_agp.c. The diff between lnx_agp.c and it + appeared to be removal of bugfixes. + +commit a115c4b872a385530dcf94b7e7f2fa9b3b7e3155 +Author: Eric Anholt +Date: Fri May 12 16:11:29 2006 -0700 + + Remove the code that changes our behavior based on whether a magic file exists + with magic contents in /tmp (created by some install script). + +commit 0cb251fadca1cbb3d4c5b97982cd0d8c2fc3e840 +Author: Eric Anholt +Date: Fri May 12 16:10:02 2006 -0700 + + Do a couple of reverts to get the DRI code building. At this point, the whole + driver builds. + +commit 78b95386b630039864b31954ebcd02ec8829b0c8 +Author: Eric Anholt +Date: Fri May 12 16:09:40 2006 -0700 + + Remove intel_randr.c and stick with the previous code. Broadwater shouldn't be + changing our randr, and the new version didn't compile. + +commit 2e58aa401dfbab438752038a9034df571c8f8bde +Author: Eric Anholt +Date: Fri May 12 15:54:37 2006 -0700 + + Make the intel_acpi.c code non-modular and make it compile. I think we'll end + up nuking this code anyway, as keithp (and I, as well) disagree about how ACPI + should be handled, but the goal is to compile at the moment. + +commit 2cd6c8fa2321ca217ef89db1027dbe9e716ad7aa +Author: Eric Anholt +Date: Fri May 12 15:37:44 2006 -0700 + + Revert internal shadow module changes back like master, along with RandR + initialization. RandR initialization retains the no-rotation setting for BW. + +commit 88558ebeed12d6cefd73bba0ddac3c043861ac89 +Author: Eric Anholt +Date: Fri May 12 15:00:17 2006 -0700 + + Start fixing up the build and remove a regression from master (I think) in + rotation. + +commit 9e387ef92be9b38c68bda8a6a28b0d9eb98d53a4 +Author: Eric Anholt +Date: Fri May 12 13:41:38 2006 -0700 + + Re-add authorship note in i830_driver.c accidentally left out of last commit. + +commit af2432322ba1d561057c34ab185561a8e799e8cd +Author: Eric Anholt +Date: Fri May 12 13:32:38 2006 -0700 + + First pass of integrating the Tungsten Graphics driver for Broadwater. This + patch is based off of diffing from the branchpoint to the supplied code, but + with many chunks containing reversions of commits removed. Won't work yet. + +commit fbba4312e7cb326fdcf6a71194c4fc4a7a9b5488 +Author: Dave Airlie +Date: Fri May 12 18:44:27 2006 +1000 + + add sdvo capability reading support + + This reads the SDVO cap bits and uses them to figure out the input/output + to save/restore + +commit f2967a2f5f47b636b2445fa69dbc3ec79e065c90 +Author: Keith Packard +Date: Tue May 9 13:51:25 2006 -0700 + + Video overlay gamma bounds checking must be done bytewise. + Also, pend bound computations to register writes to allow + updates to individual values that are 'out of spec' so + the client can update multiple values. + (cherry picked from 190f9ad0606e96e684e0b028d576d822dc9aa3cf commit) + +commit 190f9ad0606e96e684e0b028d576d822dc9aa3cf +Author: Keith Packard +Date: Tue May 9 13:51:25 2006 -0700 + + Video overlay gamma bounds checking must be done bytewise. + Also, pend bound computations to register writes to allow + updates to individual values that are 'out of spec' so + the client can update multiple values. + +commit fb10966e9f43f44488097b0daf2fbe10c6a804dc +Author: Eric Anholt +Date: Thu May 4 18:52:08 2006 -0700 + + Use xf86int10Addr() when calculating an address to read the video BIOS from, out + + of int10's copy. Fixes a crash on FreeBSD. + +commit a66f2c01f7d557d860883346671fb864807dbdca +Author: Eric Anholt +Date: Mon May 1 12:35:21 2006 -0700 + + Stop doing the BIOS memory size tweaking now that we don't ask the BIOS about + what modes are available. + +commit 99b0e53244aa49f4e7461a1c96aba69453b3516f +Author: Matthieu Herrb +Date: Mon May 1 10:47:09 2006 +0200 + + Fix non-dri build. + +commit 86f0119f47d8be975016ffdea850f0227e32eebc +Author: Matthieu Herrb +Date: Mon May 1 10:41:10 2006 +0200 + + Fix non-dri build. + +commit fcec956807038a2e90287850df8b4410b1f8b3c2 +Author: Wang Zhenyu +Date: Sat Apr 29 10:55:25 2006 +0800 + + Save initialize EXADriverPtr, and free it in failure. + +commit 0be9bc604420e4433697cc31e8ac58c9f36185e1 +Author: Wang Zhenyu +Date: Sat Apr 29 10:54:02 2006 +0800 + + I830CheckDevicesTimer() sync should be in I830_USE_XAA case. + +commit a00a3d198aee7c173c2c36858f4447e13c86eb7f +Author: Wang Zhenyu +Date: Sat Apr 29 10:52:45 2006 +0800 + + fix I830BIOSAdjustFrame() sync in I830_USE_EXA case, use exaWaitSync() helper. + +commit c94cc67bcc507e8256ae4b51b84dfe3f4aa12ab5 +Author: Eric Anholt +Date: Fri Apr 28 15:33:57 2006 -0700 + + Update to EXA 2.0 API. + +commit a4a4ced50cc235e79013ce8dd78e35c6eb4c98ca +Author: Eric Anholt +Date: Fri Apr 28 14:59:52 2006 -0700 + + Get it to compile. + +commit 941a49f91eac02e256706d8821a2cb069ff7ffef +Author: Eric Anholt +Date: Fri Apr 28 14:57:03 2006 -0700 + + Commit what applied from Jesse Barnes's i830-exa-latest.patch. + +commit a555e28e5afc81969ef7b28482e654cc26b3a446 +Author: Eric Anholt +Date: Mon Apr 24 16:55:44 2006 -0700 + + Correct some SDVO-related register definitions. + +commit cc70e6b789a1901bbe4e3501b6b654542d3cdc20 +Author: Eric Anholt +Date: Mon Apr 24 16:49:48 2006 -0700 + + Save/restore the output's SDVO reg. Note that we might be programming the other + SDVO reg instead of the one assigned to the output. When trying to fix that, I + ended up getting no output at all. + +commit b498d2b1d1170123595ada65353428578b59a361 +Author: Eric Anholt +Date: Mon Apr 24 15:42:46 2006 -0700 + + Start trying to save/restore SDVO state on VT switches. + +commit 56c1f8b0de9b6acc50f51561caf14d3e6bac09ec +Author: Eric Anholt +Date: Mon Apr 24 14:10:20 2006 -0700 + + Clean up some argument passing, and remove extra SetTarget{In,Out}Puts that had + no effect. Note that we are currently trying to program both outputs of any + SDVO device the same way. + +commit 9ba5319b36e7286e33cf0dcdd804dfc0458a81f5 +Author: Eric Anholt +Date: Mon Apr 24 13:55:05 2006 -0700 + + Only write out as many arguments as the commands need, and fix up the numbers in + some cases. Pretty-print the return status. + +commit d32514aee4b00b035652830e8b5e6c0b43cf159c +Author: Eric Anholt +Date: Mon Apr 24 12:21:45 2006 -0700 + + Start trying to implement DDC over SDVO. It's slightly tricky because the + control bus will reset from DDC mode to internal-registers mode after every + Stop afer a Start on the DDC bus. The xf86 DDC code causes multiple Start/Stops + in one probe. So, we create a wrapper bus that does the control bus switch at + every Start. It's not working yet on my hardware, but I'm pretty sure this is + the right way to go. + +commit effab21c3d108fac7a4e28ae4dabb0b5f74a5380 +Author: Eric Anholt +Date: Mon Apr 24 11:42:24 2006 -0700 + + Set displayWidth to a sufficient value for the modes we come up with for LVDS. + + Reported by: Lukáš Hejtmánek + +commit bcb441225d1365435bc3373901180de944298e86 +Author: Eric Anholt +Date: Mon Apr 24 10:54:45 2006 -0700 + + Simplify the i2c code by using the GetBits/PutBits interface rather than + reimplementing it. + +commit 47bd9059431eadfd8824e496eb91bb50efa0e282 +Merge: 729c373 32a0ad5 +Author: Eric Anholt +Date: Mon Apr 24 10:36:24 2006 -0700 + + Merge branch 'lukas-resume' + +commit 1dbb19059f5dd5cd2ad386c4f73498095987b943 +Author: Alan Hourihane +Date: Thu Apr 20 10:43:19 2006 +0100 + + fix bug 6365 + +commit 729c373121ce2bbb0d813cc923f1254e8b37a025 +Author: Dave Airlie +Date: Thu Apr 20 13:34:55 2006 +1000 + + move sdvo output setting + + we have to set the sdvo register a lot earlier in order for them to sync + properly otherwise my monitor doesn't sync unfortunately, also + disable the sdvo while tweaking the PLLs. + + This also comments out a setting that seems to break my system here for + Eric to look at later. + +commit 0ba7b13fb4410c6a48b2fb098d2033e040eca6d2 +Author: Dave Airlie +Date: Thu Apr 20 12:29:06 2006 +1000 + + fix type 0 instead of O + +commit 2991d81a3b643161babab6b8f44c057aaaf351c3 +Author: Dave Airlie +Date: Thu Apr 20 12:27:47 2006 +1000 + + correct height parameter in sdvo packet + +commit b5f099e03a9f58b6b99933fb06526bce4db72bd3 +Author: Dave Airlie +Date: Thu Apr 20 09:50:36 2006 +1000 + + cleanup sDVO for device on C only + + This destroys the i2c device properly if the device isn't detected, + and allows sDVO to work on GM chipsets, and doesn't initialise + the i2c bus twice for sDVO. + +commit 2909802de63756972b38651a496b4ff1b36ac8a2 +Author: Eric Anholt +Date: Wed Apr 19 16:29:06 2006 -0700 + + Clean up SDVO initialization, include config.h, and make it check the right + slave address on the first device as well. This gets me to the point of + bringing up some modes on my device. + +commit 32a0ad570d9c010e7d26d980830f719782d9f2f3 +Author: Lukáš Hejtmanek +Date: Wed Apr 19 19:43:45 2006 -0300 + + Add more registers to save/restore. Save/restore palette as well + +commit 132dc0599cf44389c4cc03919f1da8d3a0762b44 +Author: Eric Anholt +Date: Wed Apr 19 15:04:17 2006 -0700 + + Whine if SDVO I2C device init fails, rather than be silent. + +commit 88bb4b578857588f34ac84b7a20577139eccab6d +Author: Eric Anholt +Date: Wed Apr 19 14:23:45 2006 -0700 + + Add more SDVO code. It's taken from airlied's driver, but with magic numbers + replaced by symbolic names in many places. I tried to restrain myself from + functional changes in airlied's code in this pass. + +commit d8f7dfac769d7b03f069306b1296bb2e1e08b009 +Author: Eric Anholt +Date: Wed Apr 19 10:45:13 2006 -0700 + + Start bringing in some SDVO code, mostly from airlied. + +commit a371a04a57620b7128e3c4395bc7c2ac55effe19 +Author: Eric Anholt +Date: Mon Apr 17 14:10:50 2006 -0700 + + Use the IS_I9XX macro intead of >= i915G, since by PCI ID number, 855GM > 915. + +commit 33413a3cf34b06e3207fe1cdb733d586d55a4337 +Author: Eric Anholt +Date: Mon Apr 17 13:42:57 2006 -0700 + + Remove some dead code and one particularly useless debug printf. + +commit a85be820033af8bf30d1fec4a899349af35a6ef6 +Author: Ian Romanick +Date: Mon Apr 17 12:52:30 2006 -0700 + + Add missing new-line character in log message. + +commit 365b4a53ee965002a5452e6f6016b528e51cee69 +Author: Eric Anholt +Date: Mon Apr 17 01:12:28 2006 -0500 + + Disable the BIOS dump-to-file since it's a trivial local DOS, and I can just ask + people to turn it on and recompile when I need to. + +commit ee7be006b63b6b1ce7f786b045fb8f26d337433c +Author: Eric Anholt +Date: Sun Apr 16 13:13:42 2006 -0500 + + Bug #6589: Use alternate offsets to successfully get at the panel data for + some broken video BIOSes. + +commit 786ee3df1726f08953167d05f7fa1930452703bb +Author: Eric Anholt +Date: Sun Apr 16 13:05:35 2006 -0500 + + Add a standalone program for parsing VBT. + +commit 62652127cd12f5a0fc9364285b81d2661372148a +Author: Eric Anholt +Date: Sat Apr 15 12:16:46 2006 -0700 + + Check for LVDS BIOS tables exactly once at startup. While there, dump the BIOS + data to /tmp/xf86-video-intel-VBIOS, for offline debugging. + +commit 830fa81792a613fe2127a2b89a3eaa326f56114c +Author: Alan Hourihane +Date: Wed Apr 12 21:55:31 2006 +0100 + + fix typo + +commit 3c9bc19db63a317db9e2d67a5bc15b1de1a1060a +Author: Alan Hourihane +Date: Wed Apr 12 21:54:50 2006 +0100 + + fix typo + +commit d6edffee7d987ef551e1a94d9fac21beb72a9598 +Author: Eric Anholt +Date: Wed Apr 12 12:16:51 2006 -0700 + + Initial support for pre-i915 PLL programming. Untested. + +commit 59f88955f57cf0f98458b57418dae25cf53ca180 +Author: Eric Anholt +Date: Wed Apr 12 11:11:14 2006 -0700 + + Automatically enable clone mode if we detect two active outputs. + +commit a797a6626a8117cd16456a206ed96300e4a0ceeb +Author: Wang Zhenyu +Date: Tue Apr 11 16:44:42 2006 -0700 + + Fix a broken test that resulted in page flipping always being enabled, not just + when the user enabled it. + +commit 66d216da3bfe7c143d681b610130e6daf6dfa52f +Author: Eric Anholt +Date: Tue Apr 11 16:37:10 2006 -0700 + + Replace .cvsignore with .gitignore. + +commit 185b5251419724fa9377421d67981daa674908c8 +Author: Eric Anholt +Date: Mon Apr 10 20:25:13 2006 -0700 + + Add missing MIT copyright licenses, which should have been on all versions. + +commit c0a2dc608d95f92b0f5a151c623745f09df3afc5 +Author: Keith Packard +Date: Mon Apr 10 20:09:37 2006 -0700 + + Save/restore PFIT_CONTROL. Eliminate compiler warnings + +commit 498abf474b90b04bc4085397a209cc493d98d15c +Merge: c26f073 3de82ff +Author: Keith Packard +Date: Mon Apr 10 19:41:50 2006 -0700 + + Merge branch 'modesetting-origin' into modesetting + +commit c26f0737e2c0f000f67f21ef6007b351160036a4 +Merge: 11ad8a5 692a4a4 +Author: Keith Packard +Date: Mon Apr 10 19:41:41 2006 -0700 + + Merge in master to modesetting + +commit 3de82ff3938c6559c90079be0c28dc507d62f79e +Author: Eric Anholt +Date: Mon Apr 10 15:10:15 2006 -0700 + + Improve LVDS modes when outputting a CRT+LVDS combo at larger than the LVDS's + panel size. This is a hack until we get better clone mode, but it correctly + displays a subset of the root on the LVDS by using a correct pixel clock and + pipe/display size. + +commit 692a4a4bafd4cab197b761cda22368581b78f996 +Author: Adam Jackson +Date: Mon Apr 10 11:27:25 2006 -0700 + + Bump to 1.6.0. + +commit 43c93057c044f33c20b1dd639eaeabefc0901589 +Author: Aaron Plattner +Date: Mon Apr 10 11:26:33 2006 -0700 + + Add a DrawablePtr argument to the XV functions to pave the way for redirected + video. + +commit 39bdfbb4c23c9ba2a44888f22330a892c4becedc +Author: Alan Hourihane +Date: Mon Apr 10 11:26:06 2006 -0700 + + x86_64 warning fixes + +commit 11ad8a590d65849be00e1be4e9dd52c1159a4f24 +Author: Eric Anholt +Date: Mon Apr 10 09:39:24 2006 -0700 + + Remove the int10 POST on EnterVT. It has been reported to cause crashes now, + and I believe it is the responsibility of the kernel to bring the device back to + a mostly-sane state on resume anyway. + +commit 4217ce18cec257cad435adf9ddc9258a3c8164ec +Author: Eric Anholt +Date: Mon Apr 10 09:37:02 2006 -0700 + + Warnings cleanup. + +commit 334512e0604c208ffec914374a76d85720c1dcf9 +Author: Eric Anholt +Date: Mon Apr 10 09:32:45 2006 -0700 + + Don't try to use LVDS by default on chipsets that won't have an LVDS attached. + The BIOS tables may still exist, so we can't rely on their presence to indicate + LVDS attachment. + +commit 69083a2fc3ca4a3d06c1985c8a630d5628c1110c +Author: Eric Anholt +Date: Mon Apr 3 16:29:14 2006 -0700 + + Remove BIOS save/restore code, fixing VT switching. Removes some other dead + code, too. + +commit 2e5d85fb83def483ab1fd96877aae4a89a962b7f +Author: Eric Anholt +Date: Mon Apr 3 16:27:24 2006 -0700 + + Turn off the VGA plane when we're setting our native modes. + +commit ceb08d28f4a4e9f42c9417938b8541bf1b4e8245 +Author: Eric Anholt +Date: Mon Apr 3 15:32:41 2006 -0700 + + Remove the hacky-looking Set640x480. I'll be removing things it depends on + (setpipe), and I suspect we'll end up with different hacks for resume, anyway. + +commit 1f0ba458d02f7d4777c1669aae02138f3a6628c1 +Author: Eric Anholt +Date: Mon Apr 3 15:28:47 2006 -0700 + + Remove more BIOS stuff, particularly Get/SetDisplayDevices. Now, if there's no + hardcoding in the config file, we default to LFP if we detect it from BIOS, and + LFP or CRT if we can get EDID out of them. + +commit b20b466aaed54708ae9e4676623c8c394a6f00d5 +Author: Eric Anholt +Date: Mon Apr 3 14:28:55 2006 -0700 + + Remove the now-unused displaySize and pipeDisplaySize. + +commit d960c3ca1512a58a53b5c24702cb5c97124817ee +Author: Eric Anholt +Date: Mon Apr 3 14:12:29 2006 -0700 + + Remove more BIOS modesetting stuff. + +commit 4e3a4827007d624aa3da1a9f5a299837bd601a33 +Author: Keith Packard +Date: Fri Mar 31 14:05:46 2006 -0800 + + autodetect LVDS dither. Fix 16bpp depth selection + +commit 8d27f8246ed5a73f7a78043e128b47be784186c0 +Author: Eric Anholt +Date: Tue Mar 28 13:49:41 2006 -0800 + + Clean up (and I believe fix a couple of bugs in) the divisor selection code. + +commit e45581cd073b23a62719f20783d617bd35316fec +Author: Eric Anholt +Date: Tue Mar 28 13:40:32 2006 -0800 + + Fill in clock information from VBT table, so that a good clock value gets + requested for choosing divisors. + +commit 33977d23830b5f9bb7d9e2e9c141f91cb127b7de +Author: Eric Anholt +Date: Mon Mar 27 18:50:53 2006 -0800 + + Port code from radeon driver for panel mode validation, which will hopefully get + the right mode chosen on the VAIO. Untested. + +commit febdfa967dbe1df487db71ba5f677ef37450bf7a +Author: Eric Anholt +Date: Mon Mar 27 15:19:52 2006 -0800 + + Remove some VBE DDC code that I believe is OBE. + +commit f86892c9163473a683ab591adeb9fb1c0be2ef99 +Author: Eric Anholt +Date: Fri Mar 24 16:00:30 2006 -0800 + + Make auto panel fitting work by pulling LVDS timing EDID info out of the static + BIOS table, and always using that. + +commit f6a3243f40074aee471ec1cda2cc8e5f05116284 +Author: Eric Anholt +Date: Fri Mar 24 13:49:10 2006 -0800 + + Add more VBT reading, so we find the panel size. + +commit 64756e215016730b5cc2e174f08d47c0288c0ba4 +Author: Eric Anholt +Date: Fri Mar 24 11:55:01 2006 -0800 + + Start interpreting VBT information with the goal of pulling out LVDS timings + for panel fitting. + +commit c2d554be671f5368bd98867b8ecf9428e4560a81 +Author: Eric Anholt +Date: Thu Mar 23 14:33:04 2006 -0800 + + Save/restore a couple of important VGA plane registers, and have vgahw + save/restore everything it knows about. Also moves the save to just after the + other reg saves, above the VBE save stuff which may have side effects. + +commit 8411c126ae66239f8b3a2261e338a723c36aa44f +Author: Eric Anholt +Date: Thu Mar 23 11:31:24 2006 -0800 + + Update to newer airlied DDC code, and do some cleanups as well. Now tries DDC + on LVDS, though my current LVDS gives no results. + +commit 6414ad89b9d368a032adf2358a65404f5443ef35 +Author: Eric Anholt +Date: Thu Mar 23 09:48:18 2006 -0800 + + Add enough of airlied's DDC/I2C work to pull EDID info from my CRT. + +commit 5215e19af58f5c2746c8d281e33ecee86e55f0a5 +Author: Eric Anholt +Date: Mon Mar 13 10:29:51 2006 -0800 + + Add some register information for VGACNTRL, and do the reg-debug thing on it. + +commit b77bdc2c15640a3b15233f2190179d66bc8b2a4b +Author: Eric Anholt +Date: Wed Mar 8 15:08:06 2006 -0800 + + Move the PFIT enabling before the enabling of the pipe, as the specs say we + should. This doesn't work yet, as we apparently need to adjust the pipe to + output at the full resolution of the panel, not the displayed image size, + because PFIT controls scaling between the display planes and the pipe. + +commit de4a9e4a7891daa1488d17bf4c22283759f97373 +Author: Eric Anholt +Date: Wed Mar 8 12:54:14 2006 -0800 + + Add a couple more bits to panel auto-fitting, though it isn't working yet. + +commit 02341aa68cf2171e037196019f2553f0d1b1bd0d +Author: Eric Anholt +Date: Mon Mar 6 13:23:29 2006 -0800 + + Make the reg-snapshot code work, add a couple more registers, and use it on VT + switching to hopefully help point out where we aren't restoring enough. + Currently doesn't reveal anything. + +commit 2b6fc7ddb020a5511f6f599a2f5c37db27eddbcc +Author: Eric Anholt +Date: Fri Mar 3 15:42:15 2006 -0800 + + Add missed save/restore of DSP*SIZE registers. + +commit 12ce799818722473dde2f82739d50ba4ec7f6ecd +Author: Eric Anholt +Date: Fri Mar 3 15:38:31 2006 -0800 + + Add some untested debugging code to for helping figure out VT switch issues. + +commit 585cc5f256b8e91460414a26409d0e484a86718c +Author: Eric Anholt +Date: Fri Mar 3 10:37:26 2006 -0800 + + Add more integrated LVDS support code. + +commit 33c62e8e654fa2228bc3fd31ec0fe010703f363a +Author: Eric Anholt +Date: Thu Mar 2 17:53:38 2006 -0800 + + Change the order of reg writes for restore, possibly increasing chances of + success. Also save and restore ADPA. + +commit 7f4dc09dcafc7f0423b7f3e970a0b19fbbf515dd +Author: Eric Anholt +Date: Thu Mar 2 15:55:18 2006 -0800 + + Remove some dead VBE code. + +commit f3ec8653ab4c9b26d249bcf4393326de37ac8321 +Author: Eric Anholt +Date: Thu Mar 2 14:31:39 2006 -0800 + + Include config.h, fixing many issues with reading from pI830. + +commit 84fc3971d76f78546a0bb7dd57dba52dd893a921 +Author: Eric Anholt +Date: Thu Mar 2 13:35:40 2006 -0800 + + Turn off panel power before poking pipe B, and turn it back on if we're doing + LVDS. Also, refuse to do LVDS on pipe A, as the docs say you can't. + +commit aca0f942f377d997c5c0b5be790ee7f255d6e046 +Author: Eric Anholt +Date: Thu Mar 2 13:31:51 2006 -0800 + + Fix prototype for i830DetectCRT. + +commit df6347139bc9de22af981f776d711ac9d44fad1c +Author: Eric Anholt +Date: Thu Mar 2 12:52:19 2006 -0800 + + Use DISPPLANE_32BPP_NO_ALPHA for depth 24, else the empty alpha channel results + in a black display plane. + +commit 8e819ced8397f0330fd44efa60fef89bd10ff70e +Author: Eric Anholt +Date: Thu Mar 2 11:55:00 2006 -0800 + + It appears from the specs that you have to wait for vblank after disabling the + plane, not the pipe. + +commit ee2410b965321e3d9d64fc500fdcfa6d6dc3a039 +Author: Eric Anholt +Date: Thu Mar 2 11:43:41 2006 -0800 + + Move display base setting to a separate function and use it from both mode setup + and AdjustFrame. Rename AdjustFrame to reflect the fact that it doesn't touch + the BIOS. + +commit 980fb78e759b752a6cae3c87d188c50ab131ba80 +Author: Eric Anholt +Date: Thu Mar 2 10:49:31 2006 -0800 + + Correct capitalization of i830SetMode. + +commit 2b842c7ee3f9c33cabf16561f11bf1c3a2502d4a +Author: Eric Anholt +Date: Thu Mar 2 10:08:20 2006 -0800 + + Start implementing support for setting modes for multiple output devices, + particularly LVDS. Untested. + +commit a09d9cf27af7016bbd9e562c7b1c338154fd3d40 +Author: Eric Anholt +Date: Thu Mar 2 09:05:13 2006 -0800 + + Replace I830VESASetMode with simpler i830SetMode, which is all native and + doesn't have BIOS-setup workarounds. Multihead behavior may be wrong, and it is + all untested. + +commit 7edb25789bd13f26134e8f5bf493897c8df322e0 +Author: Eric Anholt +Date: Wed Mar 1 14:02:51 2006 -0800 + + Start making i830SetMode aware of multiple pipes. + +commit b5915ac77a3887cd3aa4ce0bb77b8a36e1aa5a1b +Author: Eric Anholt +Date: Wed Mar 1 13:12:25 2006 -0800 + + Clean up a couple of warnings. + +commit c20e15fbe4daeb7288f5c56cf5467eed13686080 +Author: Eric Anholt +Date: Wed Mar 1 13:08:38 2006 -0800 + + Disable I830VESASetVBEMode on restore, since I've removed that code. Note that + this means that VT switching is broken. We're fine with that for now, but at + least now we get a bad display rather than X crashing about an undefined symbol. + +commit 7d37c5036956609d0c7ae874d0dc1c616f76f849 +Author: Eric Anholt +Date: Wed Mar 1 13:06:04 2006 -0800 + + Re-disable chatty debug code. + +commit 2538cbeb5014e40280a3ae782a755512b1dc85fa +Author: Eric Anholt +Date: Wed Mar 1 13:01:52 2006 -0800 + + Enable -Wall on GCC, and do a cleanup of existing warnings. + +commit 7746da3b346968ab8d2534fc158d026da67cc7b5 +Author: Eric Anholt +Date: Wed Mar 1 12:49:06 2006 -0800 + + Move LVDS panel power state setting to a separate function, and reduce magic + numbers. + +commit 142bc4f91a5d776e7ab44cc5fb2328e3f7267557 +Author: Eric Anholt +Date: Tue Feb 28 18:50:57 2006 -0800 + + Write the ADPA (CRTC) register on mode setup. Obtained from airlied. + +commit 6877f532c5f41a445d41eb6a9982bf6bcf691bf2 +Author: Eric Anholt +Date: Tue Feb 28 15:56:06 2006 -0800 + + Add untested CRT detection code. + +commit a085813714818a23aa8d326804f642cd699e0f17 +Author: Eric Anholt +Date: Tue Feb 28 15:16:59 2006 -0800 + + Add adjustments of PLL divisor limits for "Almador". + +commit 2d4415ff1729554537b20be2b6c878444485e406 +Author: Eric Anholt +Date: Mon Feb 27 16:57:43 2006 -0800 + + Remove the hacked local xf86SetModeCRTC now that xf86SetCrtcForModes is taking + effect on all of our modes. + +commit 611264ab9b82bca6648a9b27e5ba4b7457c46aa6 +Author: Eric Anholt +Date: Mon Feb 27 15:44:11 2006 -0800 + + Remove more VBE stuff and start using xf86ValidateModes. Guessed some params to + xf86ValidateModes. + +commit 9838f639911e8c165ab615fdd9a00e02fa4b3f8a +Author: Eric Anholt +Date: Mon Feb 27 14:12:50 2006 -0800 + + Always ErrorF output debugging info when doing BIOS calls, including file/line. + +commit 767944e3782f9941e9fc72a6705cc3115a6e24ac +Author: Eric Anholt +Date: Mon Feb 27 13:08:46 2006 -0800 + + Replace a few magic numbers with symbolic names. Reviewed by md5. + +commit 4955cd267e7f8ed70e90b2a3de6f93de2ef859c8 +Author: Eric Anholt +Date: Mon Feb 27 09:37:47 2006 -0800 + + Add untested save/restore code, and starting on not using VBEValidateModes + +commit 73496b765c9783a8a271b4774a44fa263dd47684 +Author: Eric Anholt +Date: Mon Feb 27 09:26:51 2006 -0800 + + Change an if statement to a more obvious but equivalent case statement. + +commit 9fe316da7390918dd88940087567314b6f253981 +Author: Eric Anholt +Date: Thu Feb 23 13:49:31 2006 -0800 + + Add the manpage's possible names when generated. + +commit 1555229f29fa7479d6a7a51f451d04a5ef3460bd +Author: Eric Anholt +Date: Thu Feb 23 13:48:26 2006 -0800 + + Move .cvsignore to .gitignore + +commit 139d33ac807fb0fc35c37c3689a6e80238199442 +Author: Eric Anholt +Date: Thu Feb 23 13:46:30 2006 -0800 + + Initial add of native CRT modesetting code. + +commit 35e4756645891bfc85f25f1ab60c287eba9ef749 +Author: Dave Airlie +Date: Wed Apr 5 07:12:00 2006 +0000 + + Fix some argument inversions in xf86DrvMsg function calls + +commit 6e5f9b026372eea295c390b18fc41f7018e0e797 +Author: Kristian Høgsberg +Date: Tue Apr 4 18:22:32 2006 +0000 + + Add more missing #include's, in particular assert.h. + +commit fdfce49c54dabf0f6b0d20aa7e5eeb62b5b57eda +Author: Kristian Høgsberg +Date: Wed Mar 22 23:24:03 2006 +0000 + + Drop libc wrapper; don't include xf86_ansic.h and add includes now missing. + +commit 58817c9909ba659d0070afab0ff7f4e26f722403 +Author: Alan Hourihane +Date: Fri Mar 10 13:07:00 2006 +0000 + + Enable gamma for hw cursor when ARGB cursor in use (Lukas Hejtmanek) + +commit ab4c2f3bf4b26fdd597ea7b7a726ae77778617b2 +Author: Alan Hourihane +Date: Fri Mar 3 16:27:37 2006 +0000 + + Check the version of shadow being used and turn off rotation if it isn't the + right one. + Bump the Xvideo resolution support from 1920x1080 to 1920x1088. + +commit be6216cd8c6a47dd053240f7a5d1445b61f79038 +Author: Alan Hourihane +Date: Mon Feb 20 03:25:50 2006 +0000 + + Fix a rotation problem when DRI is disabled + +commit 073c4a6a18e98e2dde114756b5d787b13bb2b7a5 +Author: Alan Hourihane +Date: Mon Feb 20 03:22:26 2006 +0000 + + Fix a rotation problem when DRI is disabled + +commit 7cca2ae73e0114a9df2152ed5ed5b66fc44f65dd +Author: Alan Hourihane +Date: Sun Feb 19 00:04:49 2006 +0000 + + fix another build problem + +commit 2e01277da0be55687ca901efadcaf5c919826824 +Author: Alan Hourihane +Date: Fri Feb 17 16:16:10 2006 +0000 + + fix build failure + +commit 86fa25369353471dc9a1041df74e66e9029863a7 +Author: Alan Hourihane +Date: Wed Feb 15 18:31:22 2006 +0000 + + a little more of a workaround until we unplug the frontbuffer from libdri + +commit 32f97e02ac3611fd5e3870826dedf701f3b69a51 +Author: Alan Hourihane +Date: Fri Feb 10 21:59:37 2006 +0000 + + temporary workaround until DRI frontbuffer mapping code is removed from + libdri.a + +commit 50e5c2696389cb4d5907a822aa79d5e0e03cee8c +Author: Alan Hourihane +Date: Thu Jan 26 09:55:15 2006 +0000 + + update Changelog + +commit 91d2ba5743041077754de3bd3565df930b036c7d +Author: Alan Hourihane +Date: Thu Jan 26 09:05:50 2006 +0000 + + add changelog + +commit 076971b95ed3b89e1a333adbffceab1c2a5b7743 +Author: Alan Hourihane +Date: Wed Jan 25 22:22:42 2006 +0000 + + When going dual head only take a portion of memory for the second head + instead of doubling the requirements. + +commit 77d1c579f3031789031dd203175d3c9555226f79 +Author: Alan Hourihane +Date: Wed Jan 25 22:17:00 2006 +0000 + + Fix a glitch in a dual head fix from #3105 + +commit d8d749080923e88376db1aa18ae2ad722d5113d9 +Author: Alan Hourihane +Date: Tue Jan 24 15:20:34 2006 +0000 + + Bump version to 1.5.0.0 + Add Intel 945GM support + Add RandR rotation support (full 3D acceleration, HWcursor & Xvideo rotated too) + Remove shadow framebuffer rotation code + Add a new LinearAlloc option to allow more offscreen memory to be allocated + for XVideo applications. This allows HDTV movies to be played via Xvideo. + +commit 919d36b6717e9a7d930c5120309778da7b0fe16c +Author: Kevin E Martin +Date: Wed Dec 21 02:30:00 2005 +0000 + + Update package version for X11R7 release. + +commit 92962f32fccac6df751268190928d8becb558b64 +Author: Adam Jackson +Date: Mon Dec 19 16:25:53 2005 +0000 + + Stub COPYING files + +commit d2ef609211306b6bd3861c0e5f6d3a9af3e145fb +Author: Alan Coopersmith +Date: Mon Dec 19 09:07:50 2005 +0000 + + Typo fixes, mailing list & url updates, and other changes to prepare for + X11R6.9 & 7.0 releases. + +commit 1c51ff5c652690d66d1f7cba803c0bb26208b509 +Author: Kevin E Martin +Date: Thu Dec 15 00:24:17 2005 +0000 + + Update package version number for final X11R7 release candidate. + +commit c5007a4b46ffb66f5d98abe8bcae6df8c6eb1b31 +Author: Kevin E Martin +Date: Tue Dec 6 22:48:35 2005 +0000 + + Change *man_SOURCES ==> *man_PRE to fix autotools warnings. + +commit 15df4215347854604fd3f6795ac5f971444cf39d +Author: Kevin E Martin +Date: Sat Dec 3 05:49:33 2005 +0000 + + Update package version number for X11R7 RC3 release. + +commit c50cd5a7f5af7d45550f25f173b512eb89bf41c5 +Author: Kevin E Martin +Date: Fri Dec 2 02:16:08 2005 +0000 + + Remove extraneous AC_MSG_RESULT. + +commit da2c00c0e85a284e3fbd237f3a77212f9647da37 +Author: Adam Jackson +Date: Wed Nov 30 18:47:54 2005 +0000 + + Bump libdrm dep to 2.0. + +commit ca36f1da4e254c779b38df30fd655533e548a294 +Author: Adam Jackson +Date: Tue Nov 29 23:29:59 2005 +0000 + + Only build dlloader modules by default. + +commit 0b337390d6919e9a3d31ca654c8bc44b30756862 +Author: Alan Coopersmith +Date: Mon Nov 28 22:04:09 2005 +0000 + + Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4 + update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir) + +commit 159bea027893ce5996a452a6f493372792e95122 +Author: Eric Anholt +Date: Mon Nov 21 10:49:14 2005 +0000 + + Add .cvsignores for drivers. + +commit e62939e30e664592085ce394680fd8e7f3d31339 +Author: Kevin E Martin +Date: Sat Nov 19 07:15:38 2005 +0000 + + Update pkgconfig files to separate library build-time dependencies + from application build-time dependencies, and update package deps + to work with separate build roots. + +commit 08f03e4237ce9a54f0dffa37307af402b0bd2e55 +Author: Kevin E Martin +Date: Wed Nov 9 21:31:20 2005 +0000 + + Bump version numbers for X11R6.9/X11R7 RC2. + +commit a600e89a1547908f2018de96b5ecb814e2427b34 +Author: Kevin E Martin +Date: Wed Nov 9 21:15:15 2005 +0000 + + Update package version number for X11R7 RC2 release. + +commit f73c23b4c588c2f5dbc3c36a2f43b8bbb1e0f36a +Author: Kevin E Martin +Date: Tue Nov 1 15:08:53 2005 +0000 + + Update pkgcheck depedencies to work with separate build roots. + +commit 25a63bfefda420f85b3cba89bdae4b35ef80c84f +Author: Adam Jackson +Date: Fri Oct 21 18:40:19 2005 +0000 + + Bug #4829: Remove some useless DRI symbol checks. + +commit 53c122fa162709f618be26d5940e3488c0cbbafa +Author: Kevin E Martin +Date: Wed Oct 19 02:48:03 2005 +0000 + + Update package version number for RC1 release. + +commit 4b97a544cac9fb507b4a2a7c8017607ea2cac1bb +Author: Alan Coopersmith +Date: Tue Oct 18 00:01:53 2005 +0000 + + Use @DRIVER_MAN_SUFFIX@ instead of $(DRIVER_MAN_SUFFIX) in macro substitutions + to work better with BSD make + +commit c7b7ece6330561b3745f0e1136b57575eadec5ad +Author: Adam Jackson +Date: Mon Oct 17 22:57:33 2005 +0000 + + More 1.7 braindamage: define EXTRA_DIST in terms of @DRIVER_NAME@ instead of indirectly + +commit 0586dbe1c5d0432e8d8da2f3576ac2ccbe139919 +Author: Alan Coopersmith +Date: Mon Oct 17 00:09:03 2005 +0000 + + Use sed & cpp to substitute variables in driver man pages + +commit 1317f2d1f35241969dcf376abd106ffe3f918432 +Author: Søren Sandmann Pedersen +Date: Tue Oct 4 20:01:03 2005 +0000 + + Check in generated README files + +commit bd48e0531a16bdf27fc8549826cc1123ba12d5bd +Author: Søren Sandmann Pedersen +Date: Mon Oct 3 21:22:07 2005 +0000 + + - For all drivers that have a .sgml file, add code in their build + system to build the README file at make dist time + + - in util/macros/xorg-macros.m4, add a new XORG_CHECK_LINUXDOC macro that + will check if the required tools and files exist, and if so set a + conditional. + + - util/modular/symlink.sh + - Link all the .sgml to xf86-video-/README.sgml + - Add all the README. to the list of excluded files + + - xc/programs/Xserver/hw/xfree86/doc/sgml/SiS.sgml: Various changes + to make it spew less warnings when the text file is built. + +commit 6fda4e886c30669e346f7f30a38b93a77004a7f6 +Author: Alan Hourihane +Date: Mon Oct 3 09:39:17 2005 +0000 + + Bug #4353: Fix lockup when suspend and resume when playing video. + Shutdown the overlay on LeaveVT. + +commit 154724cc4be1e951649c29e4abdbde964a8c112e +Author: Alan Hourihane +Date: Tue Sep 27 08:58:23 2005 +0000 + + Put back the print code to display the DDC information, and remove some bogus + DDC messages. + +commit 2174848266940e1896970c12717e106a4742dcbc +Author: Adam Jackson +Date: Sat Sep 24 18:45:45 2005 +0000 + + Disable the {Open,Close}FullScreen DRI protocol. + Remove empty FullScreen stubs from drivers, comment the non-empty ones. + +commit b6443515e9d485b1ab8ee266c5b21750d2a5a551 +Author: Alan Coopersmith +Date: Thu Sep 22 01:58:17 2005 +0000 + + Don't build xvmc module if DRI support is not present + +commit 76033c2c885524c2116ccf0bdd30c89fa2636150 +Author: Eric Anholt +Date: Thu Sep 15 06:04:59 2005 +0000 + + Bug #4458: Check for the xvmc proto package, since it's required to build these. + (Joshua Baergen) + +commit 50f0bf51a67c89bf445a682f8fec34c52ff909a8 +Author: Alan Hourihane +Date: Thu Sep 8 14:51:40 2005 +0000 + + fix another possible crash + +commit 521e357c1846960b48e83fb97f77025f6f91e638 +Author: Alan Hourihane +Date: Thu Sep 8 09:31:04 2005 +0000 + + Fix a crash situation + +commit e8c46c897564f038744b9274949482568d654ecc +Author: Alan Hourihane +Date: Tue Sep 6 10:31:33 2005 +0000 + + Fix DirectColor visual colormap issues at 16bpp in the i830 driver. + +commit bf6fef41935ebf624cc1ae6faa084dfa0a7eee72 +Author: Alan Hourihane +Date: Tue Sep 6 10:23:57 2005 +0000 + + Sync the accelerator before calling AdjustFrame to avoid lockups. + +commit 5fc5f02d76e077b09bf3ab1c7deeb1263033d57a +Author: Dave Airlie +Date: Mon Aug 29 12:06:13 2005 +0000 + + Add i810 XvMC support, it passes distcheck for me. + +commit 86e6935bd50b129519b24ee3d694a3f75b8d4f1c +Author: Dave Airlie +Date: Mon Aug 29 12:02:29 2005 +0000 + + Fix include paths for i810 XvMC add config.h to driDrawable.c + +commit 6f1406753da102ccce1898b3f160d6eaaccc9b7c +Author: Kristian Høgsberg +Date: Fri Aug 26 15:32:40 2005 +0000 + + Added i830_io.c, which just includes i810_io.c with BUILD_FOR_I830 set. + +commit 219beaca91b88dabfe05b8e756d558269f7a5148 +Author: Daniel Stone +Date: Sun Aug 21 06:26:33 2005 +0000 + + Fix typo in debug ErrorF. + +commit fdc6997f2edf4dfdcfd877152028bff2a0306999 +Author: Daniel Stone +Date: Thu Aug 18 09:03:47 2005 +0000 + + Update autogen.sh to one that does objdir != srcdir. + +commit 461d43be78f49e6cb965b7a206c77f6fe1622601 +Author: Alan Hourihane +Date: Mon Aug 15 07:30:05 2005 +0000 + + Egbert's 64bit fixes for mixed 32/64bit clients + +commit 95bd8dbee69b4b35e4c37e19d15e0449c38726b6 +Author: Alan Hourihane +Date: Fri Aug 12 21:23:59 2005 +0000 + + add missing i830_shadow.c + +commit 7476d0413f161ddb3f3cc4a77c3f2a2912d17e60 +Author: Alan Hourihane +Date: Mon Aug 8 09:17:06 2005 +0000 + + Enable gamma correction bit even for 8bit modes. + + The pipeconf register handles the real enablement. + +commit a89f89a2423aecb199d5f4af2e9430e180aa1131 +Author: Ian Romanick +Date: Fri Aug 5 23:04:33 2005 +0000 + + I have resolved this by making all the "Direct rendering disabled" messages + X_WARNING and all the "Direct rendering enabled" messages X_INFO. Ideally, + we need to factor some of this stuff out to common code. There is a *LOT* of + duplication among the *_dri.c files under programs/Xserver/hw/xfree86/drivers. + + I'm trying to clean up as much low hanging fruit as I can and got tired of + waiting for ajax. :P + +commit fd6d7d7f7ea03961c5ecf7db029f12ece93d414a +Author: Alan Hourihane +Date: Tue Aug 2 16:22:42 2005 +0000 + + Adjust newPipe code for BIOS's starting at 1200 + +commit da7b85176fc061995e1b04fa22dc736b6c9353e6 +Author: Adam Jackson +Date: Sun Jul 31 17:19:29 2005 +0000 + + Post-merge fixups: + - Disable building the gamma driver + - Fix numerous Imakefiles to get header paths and subdirs right + - Symlink client-side GLX lib source from Mesa + - Add new shader subdirs to the Mesa core build + - Tweak the DDX drivers to not ask for "xf86dri.h"; they don't need + it, since they don't generate protocol, and it was breaking the + build. + +commit 1561ec3ca4f0d774f2664e9354d537061a0102d1 +Author: Kevin E Martin +Date: Fri Jul 29 21:22:43 2005 +0000 + + Various changes preparing packages for RC0: + - Verify and update package version numbers as needed + - Implement versioning scheme + - Change bug address to point to bugzilla bug entry form + - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n + to reenable it) + - Fix makedepend to use pkgconfig and pass distcheck + - Update build script to build macros first + - Update modular Xorg version + +commit d165b7dc4ec3793e921363cdeb1ad41c0a3653d6 +Author: Søren Sandmann Pedersen +Date: Wed Jul 27 21:23:29 2005 +0000 + + Add xf86driproto to dependencies for drivers with DRI support. Patch from + Donnie Berkholz + +commit 0cd371c6e57f899c34c4d2e2a8531ef7ce3967a4 +Author: Alan Hourihane +Date: Tue Jul 26 21:55:42 2005 +0000 + + Bump the DDX version to 1.4.0 to indicate the removal of drmAddress. + Thus allowing 32/64bit clients to cohabit. + +commit adef005c2f96395d396834f2173125f0c06d40cb +Author: Alan Hourihane +Date: Tue Jul 26 08:07:37 2005 +0000 + + Bug #3850: + Fix non-DRI builds. + +commit 09e871b1b4a67cfe818613bc012d72965b449f1c +Author: Søren Sandmann Pedersen +Date: Tue Jul 26 00:41:42 2005 +0000 + + Build system for i810 + +commit ac920dae7c22ed3956e4f31a0d3baf1909762b76 +Author: Adam Jackson +Date: Mon Jul 11 02:29:51 2005 +0000 + + Prep for modular builds by adding guarded #include "config.h" everywhere. + +commit f90f661652e5fe0986eb804f8dff3eeffe0af820 +Author: Alan Hourihane +Date: Sat Jul 9 21:19:11 2005 +0000 + + Copy mode strings upon mode copy + +commit 8fced5b648b0666ca88221e37bc1131ab5c2072d +Author: Alan Hourihane +Date: Tue Jul 5 09:25:03 2005 +0000 + + Fix Xvideo when operating in one line mode and video is pushed off the top of + the screen. Also some fixes for Xvideo skew in certain resolutions. + +commit 68bc259fa1082f7780e524fc703e926a27fc7f9a +Author: Alan Hourihane +Date: Mon Jul 4 20:45:39 2005 +0000 + + NULL check + +commit 83c3e3ee49a0aa3ceaf52e2408cc253fc5dc8af4 +Author: Alan Hourihane +Date: Tue Jun 28 16:13:02 2005 +0000 + + Add support to check the in-built VESA mode list. + +commit 0d64e9e1f5494cff633a1499545d55a0edd0d92e +Author: Adam Jackson +Date: Sat Jun 25 21:16:55 2005 +0000 + + Bug #3626: _X_EXPORT tags for video and input drivers. + +commit 67174d67e740b9082ed0a65a79f08b5df3b4fcfb +Author: Alan Hourihane +Date: Mon Jun 13 12:15:25 2005 +0000 + + commit missing piece from resume patch + +commit ddab0558d584fb906cc0dfb383cc0e7a122d5336 +Author: Alan Hourihane +Date: Thu Jun 9 09:26:03 2005 +0000 + + Bug #3496 + Remove a bogus check for DRM 1.2 for resume functionality as it's + been present since 1.1 + +commit 7f49513afe9d4490bdfdac182d50383c089875e0 +Author: Alan Hourihane +Date: Wed Jun 8 17:50:32 2005 +0000 + + Fix the mode validation such that using function 5f05 to set the refresh rate + works again. + +commit f8de9b4b9a5ce2756652c6b9ec1e84aedbc3519a +Author: Alan Hourihane +Date: Tue Jun 7 18:54:10 2005 +0000 + + Fix text restoration when display switching has been activated and we could be + potentially on a different display than the initial one. + +commit 1f538007e9da7d4ad30ec4d4d281fb07ef300ddb +Author: Alan Hourihane +Date: Mon Jun 6 09:47:29 2005 +0000 + + missed a hunk + +commit d8a32bf4274ad91cc2b9ca425f5b0a017c2dd293 +Author: Alan Hourihane +Date: Mon Jun 6 09:40:23 2005 +0000 + + Bug #3436 + Fix some offset, pitch and overlay scaler size problems with + the video overlay. Solves various spontaneous lockups. + +commit 005d121d280ff4502f4d6e3d3d585ff0175367bb +Author: Alan Hourihane +Date: Tue May 31 20:29:01 2005 +0000 + + and another. sheesh. + +commit 27f86d693c32e550d9ebf4d6ff05c2d827754c8b +Author: Alan Hourihane +Date: Tue May 31 20:27:24 2005 +0000 + + missed hunk + +commit 27feb0f3474c1e21557225e10b13558e002c0ebf +Author: Alan Hourihane +Date: Tue May 31 17:58:26 2005 +0000 + + Add Intel(R) 945G support + +commit 2d10e8dc8184b0514e8ac9f835a06b85d609bb1b +Author: Alan Hourihane +Date: Wed May 25 09:10:44 2005 +0000 + + Change the sequence on how refresh rates are set in the i830 driver. This works + much better with custom modelines. + +commit 89ec4ac201c09329d5d732323bdce6250b8592fe +Author: Alan Hourihane +Date: Fri May 20 15:24:02 2005 +0000 + + Bugzilla #3292: https://bugs.freedesktop.org/show_bug.cgi?id=3292 + Add shadowFB support to the Intel driver (Dima Dorfman) + +commit df0964ea8f92c6b278dd87b95380dbc3ada625e5 +Author: Alan Hourihane +Date: Fri May 20 13:24:02 2005 +0000 + + Bugzilla #2339: https://bugs.freedesktop.org/show_bug.cgi?id=2339 + Bugzilla #1064: https://bugs.freedesktop.org/show_bug.cgi?id=1064 + Bugzilla #3055: https://bugs.freedesktop.org/show_bug.cgi?id=3055 + Much better display switching support for mobile chipsets using + the Fn+F? combination keys. + Add DirectColor support. + Add gamma correction support. + +commit b99ef9cd59fce0e02e8829210c7cb8aadb6a3499 +Author: Alan Hourihane +Date: Fri May 20 11:56:45 2005 +0000 + + Bugzilla #2585: https://bugs.freedesktop.org/show_bug.cgi?id=2585 + Support the Intel E7221 server chipset. + +commit 3b87fac327b5549678f91a9c961b9fe5c0bf8a37 +Author: Adam Jackson +Date: Wed May 18 17:47:35 2005 +0000 + + Bug #3163: Create new DRIINFO_*_VERSION macros to indicate the + version number of the DRIInfoRec, disambiguating it from the XF86DRI + protocol version number. Modify DRIQueryVersion to return the libdri + version number, which all DDXes were requesting implicitly. Fix the + DDXes to check for the DRIINFO version they were compiled against. + +commit 72100ac7cff7485db3e869f1331caddb0bc21a24 +Author: Daniel Stone +Date: Wed Apr 20 12:25:28 2005 +0000 + + Fix includes right throughout the Xserver tree: + * change "foo.h" to for core headers, e.g. X.h, Xpoll.h; + * change "foo.h", "extensions/foo.h" and "X11/foo.h" to + for extension headers, e.g. Xv.h; + * change "foo.[ch]" to for Xtrans files. + +commit c813bf655908cd72049f346919abbdff8365b944 +Author: Alan Hourihane +Date: Thu Apr 14 22:55:01 2005 +0000 + + Fix initial DDC parameters when validating modes. + +commit e637630908f40f42367c94344d44918b6cdb0eb2 +Author: Alan Hourihane +Date: Fri Apr 1 14:17:24 2005 +0000 + + Check the VESA BIOS scanline requirements and adjust the displayWidth + accordingly. Fixes an assumption that the screen width was always used as the + displayWidth. + +commit 5090c8ba6778091aa4ce24b16b058d534ba78dc7 +Author: Alan Hourihane +Date: Mon Mar 21 21:20:39 2005 +0000 + + a one line fixup to the UseDDC code + +commit 8bc9b0d7da5de9a3294687f450afb50452898c7d +Author: Alan Hourihane +Date: Mon Mar 21 18:57:39 2005 +0000 + + Fix some bad alignment problems when allocating memory from + the end of AGP space. + Bugzilla #2764 (https://bugs.freedesktop.org/show_bug.cgi?id=2764) + +commit 50a105e88cfdfc22fef8cfd2397fc5e9fae17663 +Author: Alan Hourihane +Date: Tue Mar 15 13:10:23 2005 +0000 + + LFP's may exist on Pipe A in older i830's. Check that case so that Panel ID can + be obtained and Xvideo is correctly setup for panel fitting. + +commit eb8b5df739e7be4509423c2bf757a7df35ce02f6 +Author: Alan Hourihane +Date: Tue Mar 15 11:32:10 2005 +0000 + + Enforce DDC monitor ranges usage if we have them and reject bad + modes. Use NoDDC option to override DDC timings. We currently + only use DS_RANGES, but could use other DDC information, as does + the common layer, to deduce the h/v ranges. + +commit 49dcbacf7fa7f29d18c18eec7e2f99e859bf4c7e +Author: Alan Hourihane +Date: Thu Mar 3 18:01:51 2005 +0000 + + Limit the maximum refresh rate to 85Hz and remove the bogus + 100Hz and 120Hz settings as they don't match close enough and + are really unsupported. + +commit 7eaf88d00d7539fde68422ae6566f23993aa2633 +Author: Alan Hourihane +Date: Tue Mar 1 19:53:28 2005 +0000 + + Fix an off by one error when scaling which caused occasional + overlay color lines at the far right and bottom of the window. + +commit 28d65bceaec3ef636f0f5bdd03b38fd76f87c8c6 +Author: Alan Hourihane +Date: Thu Feb 10 13:16:08 2005 +0000 + + Fix unaligned YV12 videos that caused skew when playing. + +commit 6352e65b9cd635e9f266e0e9ed64c5beae9e5c44 +Author: Alan Hourihane +Date: Thu Feb 10 10:41:20 2005 +0000 + + Fix pixmap cache corruption when Xv was in use due to a memory allocator + calculation problem. + +commit f691f959213d3eb5c365edaf5a5a53fa96300491 +Author: Alan Hourihane +Date: Tue Feb 8 20:13:33 2005 +0000 + + Setup the Xv atoms correctly. + +commit 31a4191a97f538b2c6d4b8036796f06443f783c1 +Author: Egbert Eich +Date: Mon Feb 7 11:56:31 2005 +0000 + + Check the pixel clock choosen for a specific refresh rate + against the maximally allowed pixel clock when choosing + mode lines for VBESetVBEMode() and VESA BIOS version >= 3.0 + (Bugzilla #2486). + +commit a103496e08f699b609be875827ecf1f3afa45e68 +Author: Alan Hourihane +Date: Tue Feb 1 19:47:32 2005 +0000 + + Check return value of i830InitDma() and fail to initialize the DRI + if that fails. + Also, check the DRM module name that it matches i915 and not the + older i830 driver which some people were still trying to use + and was causing Dma Initialization failures and lockups. + +commit 7ff7cec9220815eb5f74cfd95860aaa5f1f263bd +Author: Egbert Eich +Date: Mon Jan 24 15:02:17 2005 +0000 + + Unmap XCursor AGP memory on VT switch to prevent system from lockup + (Matthias Hopf). + +commit d4c87adf6792ae9af641b9824c547d18cdd1e521 +Author: Alan Hourihane +Date: Mon Jan 10 11:29:02 2005 +0000 + + Revert some changes to TweakMemorySize + +commit 076c5116ae5eda1822da70184cbcc8942b470541 +Author: Alan Hourihane +Date: Thu Jan 6 14:43:14 2005 +0000 + + Add: + - Intel i915GM support to 2D DDX and 3D Mesa drivers. + - PanelID identification + - DRI suspend/resume support + - Detection of monitor changes on VT switches + - Support custom video modes if available in the Video BIOS + - 3D enhancements: + * GL_ARB_texture_cube_map + * GL_EXT_blend_equation_separate + * GL_ATI_blend_equation_separate + * GL_ARB_point_parameters + * GL_NV_blend_square + * GL_EXT_cull_vertex + * GL_ARB_depth_texture + * GL_SGIX_depth_texture + * GL_ARB_shadow + * GL_EXT_shadow_funcs + * GL_3DFX_texture_compression_FXT1 + By Tungsten Graphics, Keith Whitwell & Alan Hourihane. + +commit edb9b6fde0948bb1121a8456500ef9f55f734376 +Author: Adam Jackson +Date: Mon Jan 3 16:03:56 2005 +0000 + + Bug #1488: Fix crash on i830 during startup. (Eric Anholt) + +commit 59cecb714b78f7f384c24bf159bd39c81e9c7ee1 +Author: Markus Kuhn +Date: Sat Dec 4 00:43:09 2004 +0000 + + Encoding of numerous files changed to UTF-8 + +commit c24b0e04f3a1b064412e0bea44c4af546ec9fb77 +Author: Egbert Eich +Date: Tue Nov 2 08:54:53 2004 +0000 + + Fixed KGA handling for i810. KGA handling for chips derived from C&T chips is + slightly different. The changes make the code consistent with the C&T (chips) + and i740 drivers. + +commit 7ce4898ee319d149cf86e938e7257ea7490d327f +Author: Egbert Eich +Date: Wed Oct 27 09:52:15 2004 +0000 + + Removing vtSema shilding of accel sync - should have been '&&' instead of '||' + anyway. + +commit 88714c3b2274fcfe50837631b1d38a7cd96f692a +Author: Egbert Eich +Date: Tue Oct 12 19:13:43 2004 +0000 + + Change order of SetDisplayDevice(), HWRestore(), UnbindGART() and + RestoreBIOSMemSize() to be exactly opposite to the Save procedure in EnterVT() + (Matthias Hopf, Alan Hourihane). + Fixed server crash on reset when a structure allocated in PreInit() was freed on + CloseScreen(). + Fixed ring buffer lock ups that happened because the structure that contained + ringbuffer data was not zeroed after allocation. + Fixed numerous warnings due to signed unsigned comparisons. + +commit 687298daed40aaade44e61342a9abe984088541b +Author: Egbert Eich +Date: Mon Oct 11 09:58:04 2004 +0000 + + Checking if server isn't switched away before calling sync. + Sanity check for possible bugs in aother areas of the code. + Fixing default amount of of allocated video memory from AGP for i810: Use 16MB + if less than 192MB are installed else use 24MB (Matthias Hopf). + +commit d2866271b8d42a0d44b65e30667adab96ac8fd54 +Author: Adam Jackson +Date: Wed Sep 22 04:38:03 2004 +0000 + + Bug #1252, #1253, #1255, #1256: Various typo fixes from Dave Jones. + +commit 88fd270d23ed1a1761cfdb98367c89ca89735b12 +Author: Adam Jackson +Date: Fri Sep 17 03:04:51 2004 +0000 + + Bug #1192: Remove cfb support from drivers where its use is an option. + Delete xf24_32bpp, as s3virge was the last user. Fix up some comments + to refer to fb rather than cfb. + +commit 9e8e19c6fde15fe5b9bb7532316dedeeca54b8d9 +Author: Kevin E Martin +Date: Mon Aug 30 03:19:08 2004 +0000 + + Fix ARGB cursor problem on i810 (Bug #1195, Alan Hourihane). + +commit 15c61546ea1a64d6c7dd60764164143ea7174123 +Author: Kevin E Martin +Date: Thu Aug 26 05:10:56 2004 +0000 + + Fix i810 compilation without Xinerama (Bug #1180, Simon Schubert). + +commit 828c0fb8050dcbed8026365cbcb17d4d4330c268 +Author: Kevin E Martin +Date: Wed Aug 25 00:30:41 2004 +0000 + + Fix i810 driver startup on Sony VAIO laptop (Bug #1084, Dave Airlie). + +commit c4626af83d760c2a6aae90ad478430eac1c4f4ea +Author: Egbert Eich +Date: Fri Jul 30 21:36:40 2004 +0000 + + Do I810EmitFlush() during screen init to make sure 2D engine is in a sane state + (Peter Kunzmann). + +commit e0e01b7d6188a83c7539256ac1710ace04ce132a +Author: Egbert Eich +Date: Fri Jul 30 20:38:27 2004 +0000 + + add i845 to the list of chips that allow memory size tweaking. + +commit 199620cdc924e6aa98683e305843ea91c7e1771d +Author: Adam Jackson +Date: Fri Jul 30 20:30:52 2004 +0000 + + Bug #400 (partial): Driver fixes for the dlloader. When using + dlloader, all framebuffer formats except cfb and the overlay modes + should work, and r128 and radeon need to be loaded from the ati + driver (both issues to be fixed soon). Tested on i740, s3virge, + mach64, tdfx, vesa, and vga drivers. elfloader users shouldn't be + affected. + +commit 54e644ffbb63290b7e2ec51b041f5b2df26e164b +Author: Egbert Eich +Date: Fri Jul 30 19:04:14 2004 +0000 + + Removed bugs on TweakMemorySize() which prevented it from working at all. + Initialized last element of BIOS version number string to 0 to avoid random + problems. + +commit 3a3b00f18ac5edd7dfef06a96342c95f3cb97f79 +Author: Kevin E Martin +Date: Fri Jul 30 04:44:13 2004 +0000 + + Fix "DoLoadableServer NO" build + +commit 986bc24892e7ce3784fc723fda54b1f89dd75b66 +Author: Egbert Eich +Date: Tue Jul 6 14:37:47 2004 +0000 + + Increase default video RAM size to 16MB when DRI is enabled and more than 128MB + are available (Egbert Eich). + Fixed lockups during mode switch. Problem was introduced when attempting to copy + the behavior during LeaveVT()/EnterVT() but but forgetting to call + I810DRILeave() before I810DRIEnter(). The entire DRILeave()/Enter() scenario has + been commented out as it didn't seem to be necessary (Egbert Eich). + Fix TweakMemorySize() (tested with i855/i865) (Egbert Eich). + +commit b7310758e60956a7de14dcf968bb713dfc56738f +Author: Alan Hourihane +Date: Tue Jun 22 15:12:42 2004 +0000 + + add CmdBuffer + +commit 5ed7e6f8424236dd57d83f6ab1282693260969cb +Author: Alan Hourihane +Date: Tue Jun 22 14:28:46 2004 +0000 + + i915 support + Dual Head support for i830, i855, i915. + ARGB cursor support (including i810) for all chipsets. + +commit a46e95722d3c2b9dfb9eacf9a390a7c47d427773 +Author: Eric Anholt +Date: Wed Jun 16 19:16:54 2004 +0000 + + Mop-up from the DRI 20040613 import, taking care of some drm.h + header location and type changes, and update the ChangeLog. + +commit 35a5cf103e9e41d178f980f685307f8c8063a006 +Author: Eric Anholt +Date: Wed Jun 16 09:44:00 2004 +0000 + + Merge DRI-trunk-20040613 changes in programs/Xserver/hw/xfree86/drivers, with + the following notes: + + - Savage and Mach64 (= ati/ati*.[ch] changes) DRI not merged due to insecurity. + - VIA driver converted to new drmContext and drmHandle names. + - Radeon driver merge conflicted in many places, and MergedFB at least could + probably use some checking at this point. + +commit bec47f9369b6f02ce4537ab1ac547ba933609edc +Author: Eric Anholt +Date: Wed Jun 16 09:26:18 2004 +0000 + + DRI trunk-20040613 import + +commit c5b1972b50a6dbe57c67d3cc88ae010386b908a6 +Author: Eric Anholt +Date: Wed Jun 16 09:23:18 2004 +0000 + + DRI XFree86-4_3_99_12-merge import + +commit 41eba03d0d62fe03a7b437c9c4914016c3125141 +Author: Egbert Eich +Date: Fri Apr 23 19:35:55 2004 +0000 + + Merging XORG-CURRENT into trunk + +commit e27494f2a9262b6310c2f1e0a40c406f578fc693 +Author: Egbert Eich +Date: Sun Mar 14 08:33:22 2004 +0000 + + Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004 + +commit 5ece535dc7f77185cc8c327a57ae3c02c8b9f918 +Author: Egbert Eich +Date: Wed Mar 3 12:12:19 2004 +0000 + + Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004 + +commit ba904078dd22e013f4112479e7c2669c33e708a8 +Author: Egbert Eich +Date: Thu Feb 26 13:35:53 2004 +0000 + + readding XFree86's cvs IDs + +commit 13ea363db30dc0010cd09df29df90074db77f646 +Author: Egbert Eich +Date: Thu Feb 26 09:23:19 2004 +0000 + + Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004 + +commit 64b129e800d915f0d82a67ce0f8b1850e67012fc +Author: Egbert Eich +Date: Thu Jan 29 08:08:35 2004 +0000 + + Importing vendor version xf86-012804-2330 on Thu Jan 29 00:06:33 PST 2004 + +commit 64d7bbf0ac060a57761aa2ecf21ddbe8169674c0 +Author: Kaleb Keithley +Date: Fri Dec 19 20:55:10 2003 +0000 + + XFree86 4.3.99.902 (RC 2) + +commit 418eaaee109acd3ea178b147dd29f90318d159f9 +Author: Kaleb Keithley +Date: Thu Dec 4 22:03:17 2003 +0000 + + XFree86 4.3.99.901 (RC 1) + +commit 72063c52b82faf80a0183f66d2fd5789def76d8f +Author: Kaleb Keithley +Date: Tue Nov 25 19:28:37 2003 +0000 + + XFree86 4.3.99.16 + Bring the tree up to date for the Cygwin folks + +commit e04a1a8f862eb63b546fb74e73ee602fefb82e00 +Author: Kaleb Keithley +Date: Fri Nov 14 16:48:55 2003 +0000 + + XFree86 4.3.0.1 + +commit 3ad0d9a73bc0a4f3edb858d5f3a7c36827b7a429 +Author: Kaleb Keithley +Date: Fri Nov 14 16:48:55 2003 +0000 + + Initial revision --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/watch +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/watch @@ -0,0 +1,3 @@ +#git=git://anongit.freedesktop.org/xorg/driver/xf86-video-intel +version=3 +https://xorg.freedesktop.org/releases/individual/driver/ xf86-video-intel-(.*)\.tar\.gz --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xorg.conf +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xorg.conf @@ -0,0 +1,5 @@ +Section "Device" + Identifier "Intel" + Driver "intel" +# Option "AccelMethod" "uxa" +EndSection --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.docs +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.docs @@ -0,0 +1,3 @@ +NEWS +README +debian/xorg.conf --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.install +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.install @@ -0,0 +1,7 @@ +usr/bin/intel-virtual-output +usr/lib/xorg/modules/drivers/*.so +usr/lib/*/libI810XvMC.so* +usr/lib/*/libIntelXvMC.so* +usr/lib/xserver-xorg-video-intel/xf86-video-intel-backlight-helper +usr/share/polkit-1/actions/org.x.xf86-video-intel.backlight-helper.policy +usr/share/man --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.install.kfreebsd-amd64 +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.install.kfreebsd-amd64 @@ -0,0 +1,4 @@ +usr/lib/xorg/modules/drivers/*.so +usr/lib/*/libI810XvMC.so* +usr/lib/*/libIntelXvMC.so* +usr/share/man --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.install.kfreebsd-i386 +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.install.kfreebsd-i386 @@ -0,0 +1,4 @@ +usr/lib/xorg/modules/drivers/*.so +usr/lib/*/libI810XvMC.so* +usr/lib/*/libIntelXvMC.so* +usr/share/man --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.links +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.links @@ -0,0 +1 @@ +usr/share/bug/xserver-xorg-core/script usr/share/bug/xserver-xorg-video-intel/script --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.lintian-overrides +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.lintian-overrides @@ -0,0 +1 @@ +package-name-doesnt-match-sonames libI810XvMC1 libIntelXvMC1 --- xserver-xorg-video-intel-2.99.917+git20200714.orig/debian/xserver-xorg-video-intel.maintscript +++ xserver-xorg-video-intel-2.99.917+git20200714/debian/xserver-xorg-video-intel.maintscript @@ -0,0 +1 @@ +rm_conffile /etc/modprobe.d/i915-kms.conf 2:2.21.9-1~