--- ap-utils-1.5.orig/debian/README.source +++ ap-utils-1.5/debian/README.source @@ -0,0 +1,4 @@ +Changes to upstream source are organised as a quilt patch series. + +Run debian/rules patch to apply all patches and debian/rules unpatch +to remove them. See the quilt documentation for more information. --- ap-utils-1.5.orig/debian/changelog +++ ap-utils-1.5/debian/changelog @@ -0,0 +1,114 @@ +ap-utils (1.5-3) unstable; urgency=medium + + * QA upload. + * Add a debian/watch file. + * Bump Standards-Version to 3.9.8. + * Set Debian QA Group as maintainer. (see #703278) + * Run wrap-and-sort. + + -- Allan Dixon Jr. Sun, 06 Nov 2016 14:48:50 -0500 + +ap-utils (1.5-2) unstable; urgency=low + + * Update config.{sub,guess} in the right place at build time - + closes: #534825 + + -- Ben Hutchings Wed, 26 Aug 2009 00:43:16 +0100 + +ap-utils (1.5-1) unstable; urgency=low + + * New maintainer - closes: #519617 + * Newer upstream release + * Upgrade to debhelper 7 + * Install Ukrainian README file as README.uk and English as README - + closes: #291898 + - Convert both files from KOI8-U to UTF-8 encoding + * Use quilt for patches + * Fix spelling errors in manual pages, thanks to A. Costa - + closes: #461807, #461808, #461810, #461811, #461812 + * Update Standards-Version to 3.8.1 + - Add Homepage field + + -- Ben Hutchings Sun, 19 Apr 2009 04:06:50 +0100 + +ap-utils (1.4.1+1.5pre1-1) unstable; urgency=low + + * The "Freedom Of Ukraine" release + * New upstream release (closes: #243208 fix little incorrection in man page) + - added two new programs ap-auth and ap-gl + - added support for VERNET AP extension + - lots of ui improvement + - Some lintian fixes about utf8 encoding + + -- Celso González Sun, 5 Dec 2004 19:40:10 +0100 + +ap-utils (1.4.1-1) unstable; urgency=low + + * New upstream release (closes: #234310) + - Decreases time response in snmp + - many bugfixes + - Updated french and ukranian traslations + + -- Celso González Fri, 18 Jun 2004 12:10:00 +0200 + +ap-utils (1.3.3-1) unstable; urgency=low + + * New upstream release including this features + -many new options and better support for ATMEL12350 devices; + -added AP type autodetection + -added option to choose AP to connect from AP search result; + -user interface improvements; + -many internal improvements to avoid memory leaks; + -BSD compile fixes; + -bigendian fixes; + -added Romanian and Dutch translation + * Fix lintian warning about Ukranian doc install + * Bump standards to 3.6.1.0 (all control files are now in utf8) + + -- Celso González Mon, 27 Oct 2003 12:52:52 +0100 + +ap-utils (1.3.2-1) unstable; urgency=low + + * New upstream release (closes: #182096 problems with 64bits machines) + + -- Celso González Wed, 28 May 2003 12:27:32 +0200 + +ap-utils (1.3.1-2) unstable; urgency=low + + * Bump standards version to 3.5.10, no changes needed + * Fix lintian warnings aboutautotools outdated (solves mips + and mipsel compilation) + * Fix libncurses-dev depends to libncurses5-dev + * Add Ovislink and Ukrainian documentation in doc + + -- Celso González Thu, 22 May 2003 11:16:30 +0200 + +ap-utils (1.3.1-1) unstable; urgency=low + + * New upstrem version (closes: #174673 and #186483) + * Adopted package by new maintainer (closes: #193116) + * Remove references to ap-atmel and ap-nwm in control file + * Updated standards version to 3.5.9.0 + * Fix lintian complaint about versioned debhelper + + -- Celso González Mon, 19 May 2003 11:38:29 +0200 + +ap-utils (1.1-1) unstable; urgency=low + + * New upstream version. + * Updated standards version to 3.5.7. + + -- Robert McQueen Sun, 29 Sep 2002 23:06:33 +0100 + +ap-utils (1.0.4-1) unstable; urgency=low + + * New upstream version. + * Includes manpages. + + -- Robert McQueen Sat, 10 Aug 2002 13:53:27 +0100 + +ap-utils (1.0-020624-1) unstable; urgency=low + + * Initial release. (closes: #150970) + + -- Robert McQueen Tue, 25 Jun 2002 18:32:02 +0100 --- ap-utils-1.5.orig/debian/compat +++ ap-utils-1.5/debian/compat @@ -0,0 +1 @@ +7 --- ap-utils-1.5.orig/debian/control +++ ap-utils-1.5/debian/control @@ -0,0 +1,32 @@ +Source: ap-utils +Section: net +Priority: optional +Maintainer: Debian QA Group +Build-Depends: autotools-dev, debhelper (>= 7), libncurses5-dev, quilt +Standards-Version: 3.9.8 +Homepage: http://ap-utils.polesye.net/ +Vcs-Git: http://git.decadent.org.uk/git/ap-utils.git/ +Vcs-Browser: http://git.decadent.org.uk/gitweb?p=ap-utils.git + +Package: ap-utils +Architecture: any +Depends: ${misc:Depends}, ${shlibs:Depends} +Description: Access Point SNMP Utils for Linux + A set of utilities for remotely administrating a variety of wireless + access points via SNMP: + * ap-auth - update authentication list + * ap-config - interactively configure or get statistics from + devices that support MIB-II, IEEE 802.11 MIB or NWN DOT11EXT MIB + and most Atmel-chipset based APs + * ap-gl - interactively configure or get statistics from + Atmel Prism-based APs + * ap-mrtg - get statistics from an AP in MRTG format + * ap-rrd - get statistics from an AP in RRDtool format + * ap-tftp - update AP firmware by TFTP + * ap-trapd - receive, parse and log trap messages from an AP + . + Access points supported include Global Sun ProWave GL2411AP, Compex + WavePort WP11, Linksys WAP11, SMC MC2655W, Netgear ME102, Edimax WLAN + Access Point, D-Link DWL 900AP and Eumitcom WA3001A. Others based on + Atmel chipsets or supporting MIB-II, IEEE 802.11 MIB and NWN DOT11EXT + MIB should also work. --- ap-utils-1.5.orig/debian/copyright +++ ap-utils-1.5/debian/copyright @@ -0,0 +1,20 @@ +ap-utils was originally packaged for Debian by +Robert McQueen . It is currently maintained by +Ben Hutchings . + +It was downloaded from: + http://ap-utils.polesye.net/ + +Copyright (c) 2002-2005 Roman Festchook + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License Version 2 from +June 1991 as published by the Free Software Foundation. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +On Debian systems, the complete text of the GNU General Public +License can be found in /usr/share/common-licenses/GPL-2 file. --- ap-utils-1.5.orig/debian/docs +++ ap-utils-1.5/debian/docs @@ -0,0 +1,8 @@ +#Documentation/Ukrainian/README needs conversion (and clashes with README) +#README needs conversion +Documentation/FAQ +Documentation/HARDWARE-NOTES +Documentation/Ovislink-HOWTO.html +NEWS +THANKS +TODO --- ap-utils-1.5.orig/debian/patches/101_fix-man-page-spelling.diff +++ ap-utils-1.5/debian/patches/101_fix-man-page-spelling.diff @@ -0,0 +1,144 @@ +--- ap-utils.orig/Documentation/ap-auth.8 ++++ ap-utils/Documentation/ap-auth.8 +@@ -1,5 +1,5 @@ + .\" Manpage for ap-auth utility +-.\" from Wireless Access Point Utilitess for Unix ++.\" from Wireless Access Point Utilities for Unix + .\" + .\" Copyright (c) 2002 Roman Festchook + .\" +@@ -15,7 +15,7 @@ + .\" You should have received a copy of the GNU General Public License along + .\" with this program; if not, write to the Free Software Foundation, Inc., + .\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +-.TH ap-auth 8 "Wireless Access Point Utilites for Unix" ++.TH ap-auth 8 "Wireless Access Point Utilities for Unix" + .SH NAME + ap-auth \- AP authorized MAC change utility + +--- ap-utils.orig/Documentation/ap-config.8 ++++ ap-utils/Documentation/ap-config.8 +@@ -1,5 +1,5 @@ + .\" Manpage for ap-config utility +-.\" from Wireless Access Point Utilitess for Unix ++.\" from Wireless Access Point Utilities for Unix + .\" + .\" Copyright (c) 2002 Roman Festchook + .\" +@@ -15,7 +15,7 @@ + .\" You should have received a copy of the GNU General Public License along + .\" with this program; if not, write to the Free Software Foundation, Inc., + .\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +-.TH ap-config 8 "Wireless Access Point Utilites for Unix" ++.TH ap-config 8 "Wireless Access Point Utilities for Unix" + .SH NAME + ap-config \- configure and monitor Atmel and NWN based APs + +@@ -50,7 +50,7 @@ + .TP + .B KnownAP + By using option APs from info menu you may see all Access Points thats visible by your AP. +- * Link Quality: An indicator for the quality of the Client. If the associat ion is still pending, the quality is calculated over the received Probe Requests from the Client. If the Client is associated, the quality derived from any activity with the Client. The actual quality source depends on the selected quality indicator. The semantics of the indicator is 'low is good quality' and 'high is bad quality'. ++ * Link Quality: An indicator for the quality of the Client. If the association is still pending, the quality is calculated over the received Probe Requests from the Client. If the Client is associated, the quality derived from any activity with the Client. The actual quality source depends on the selected quality indicator. The semantics of the indicator is 'low is good quality' and 'high is bad quality'. + * RSSI: An indicator for the RSSI in dBm of the Client. If the association is still pending, the RSSI is calculated over the received Probe Requests from the Client. If the Client is associated, the RSSI derived from any activity with the Client. + * WARNING! By reports this option my be dangerously - in some cases you may lost you AP configuration and on SMC2655W the one way to fix it - only restore factory defaults. + .PP +@@ -90,7 +90,7 @@ + .br + Power: 0mw--------100mw-------0mw + .br +- So to get maximum power output from your AP set value for corresponding channel to 128 (0x80). But sometimes better solution - experimentalli choose values for best link quality, sometimes not max. More info you can get from: ++ So to get maximum power output from your AP set value for corresponding channel to 128 (0x80). But sometimes better solution - experimentally choose values for best link quality, sometimes not max. More info you can get from: + http://pasadena.net/aprf/; + http://www.wi2600.org/mediawhore/nf0/wireless/docs/802.11/WAP11/fun_with_the_wap11.txt. + .TP +@@ -118,7 +118,7 @@ + Tx Filter: Under this option user needs to select the Baseband transmitting Filter to be used. There are two options (US, JPN) available since the bandwidth for Europe - USA is 11MHz and for, Japan is 14MHz. + Rate: Under this option user needs to specify the rate to be used among the following options 1Mbps, 2Mbps, 5.5Mbps and 11Mbps. + Channel: Under this option user needs to select the channel to be used. There are 14 channels available. +- After setting the parameters there are three commands available: Continuous Tx (With modulation), Continuous Tx (Witout modulation) and Continuous Rx: ++ After setting the parameters there are three commands available: Continuous Tx (with modulation), Continuous Tx (without modulation) and Continuous Rx: + * Continuous Tx (with modulation): Using this command the MAC sets the transmitter in continuous mode with modulation. We can measure the output power of the radio. + * Continuous Tx (without modulation): Using this command we can measure the frequency accuracy of the radio. The MAC sets the baseband Processor in test mode and turns off the spreading and scrambling codes. + * Continuous Rx: With this command user can set the device in a receiving mode. +--- ap-utils.orig/Documentation/ap-gl.8 ++++ ap-utils/Documentation/ap-gl.8 +@@ -1,5 +1,5 @@ + .\" Manpage for ap-gl utility +-.\" from Wireless Access Point Utilitess for Unix ++.\" from Wireless Access Point Utilities for Unix + .\" + .\" Copyright (c) 2002 Roman Festchook + .\" +@@ -15,7 +15,7 @@ + .\" You should have received a copy of the GNU General Public License along + .\" with this program; if not, write to the Free Software Foundation, Inc., + .\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +-.TH ap-gl 8 "Wireless Access Point Utilites for Unix" ++.TH ap-gl 8 "Wireless Access Point Utilities for Unix" + .SH NAME + ap-gl \- configure and monitor ATMEL_PRISM based APs + +@@ -51,7 +51,7 @@ + .TP + .B KnownAP + By using option APs from info menu you may see all Access Points thats visible by your AP. +- * Link Quality: An indicator for the quality of the Client. If the associat ion is still pending, the quality is calculated over the received Probe Requests from the Client. If the Client is associated, the quality derived from any activity with the Client. The actual quality source depends on the selected quality indicator. The semantics of the indicator is 'low is good quality' and 'high is bad quality'. ++ * Link Quality: An indicator for the quality of the Client. If the association is still pending, the quality is calculated over the received Probe Requests from the Client. If the Client is associated, the quality derived from any activity with the Client. The actual quality source depends on the selected quality indicator. The semantics of the indicator is 'low is good quality' and 'high is bad quality'. + * RSSI: An indicator for the RSSI in dBm of the Client. If the association is still pending, the RSSI is calculated over the received Probe Requests from the Client. If the Client is associated, the RSSI derived from any activity with the Client. + * WARNING! By reports this option my be dangerously - in some cases you may lost you AP configuration and on SMC2655W the one way to fix it - only restore factory defaults. + .PP +@@ -91,7 +91,7 @@ + .br + Power: 0mw--------100mw-------0mw + .br +- So to get maximum power output from your AP set value for corresponding channel to 128 (0x80). But sometimes better solution - experimentalli choose values for best link quality, sometimes not max. More info you can get from: ++ So to get maximum power output from your AP set value for corresponding channel to 128 (0x80). But sometimes better solution - experimentally choose values for best link quality, sometimes not max. More info you can get from: + http://pasadena.net/aprf/; + http://www.wi2600.org/mediawhore/nf0/wireless/docs/802.11/WAP11/fun_with_the_wap11.txt. + +@@ -113,7 +113,7 @@ + Tx Filter: Under this option user needs to select the Baseband transmitting Filter to be used. There are two options (US, JPN) available since the bandwidth for Europe - USA is 11MHz and for, Japan is 14MHz. + Rate: Under this option user needs to specify the rate to be used among the following options 1Mbps, 2Mbps, 5.5Mbps and 11Mbps. + Channel: Under this option user needs to select the channel to be used. There are 14 channels available. +- After setting the parameters there are three commands available: Continuous Tx (With modulation), Continuous Tx (Witout modulation) and Continuous Rx: ++ After setting the parameters there are three commands available: Continuous Tx (with modulation), Continuous Tx (without modulation) and Continuous Rx: + * Continuous Tx (with modulation): Using this command the MAC sets the transmitter in continuous mode with modulation. We can measure the output power of the radio. + * Continuous Tx (without modulation): Using this command we can measure the frequency accuracy of the radio. The MAC sets the baseband Processor in test mode and turns off the spreading and scrambling codes. + * Continuous Rx: With this command user can set the device in a receiving mode. +--- ap-utils.orig/Documentation/ap-mrtg.8 ++++ ap-utils/Documentation/ap-mrtg.8 +@@ -1,5 +1,5 @@ + .\" Manpage for ap-mrtg utility +-.\" from Wireless Access Point Utilitess for Unix ++.\" from Wireless Access Point Utilities for Unix + .\" + .\" Copyright (c) 2002 Roman Festchook + .\" +@@ -15,7 +15,7 @@ + .\" You should have received a copy of the GNU General Public License along + .\" with this program; if not, write to the Free Software Foundation, Inc., + .\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +-.TH ap-mrtg 8 "Wireless Access Point Utilites for Unix" ++.TH ap-mrtg 8 "Wireless Access Point Utilities for Unix" + .SH NAME + ap-mrtg \- AP to MRTG data translator + +--- ap-utils.orig/Documentation/ap-trapd.8 ++++ ap-utils/Documentation/ap-trapd.8 +@@ -1,5 +1,5 @@ + .\" Manpage for ap-trapd utility +-.\" from Wireless Access Point Utilitess for Unix ++.\" from Wireless Access Point Utilities for Unix + .\" + .\" Copyright (c) 2002 Roman Festchook + .\" +@@ -15,7 +15,7 @@ + .\" You should have received a copy of the GNU General Public License along + .\" with this program; if not, write to the Free Software Foundation, Inc., + .\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +-.TH ap-trapd 8 "Wireless Access Point Utilites for Unix" ++.TH ap-trapd 8 "Wireless Access Point Utilities for Unix" + .SH NAME + ap-trapd \- a SNMP trap processing daemon + --- ap-utils-1.5.orig/debian/patches/102_man-page-for-ap-rrd.diff +++ ap-utils-1.5/debian/patches/102_man-page-for-ap-rrd.diff @@ -0,0 +1,57 @@ +--- ap-utils.orig/Documentation/ap-mrtg.8 ++++ ap-utils/Documentation/ap-mrtg.8 +@@ -17,9 +17,10 @@ + .\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + .TH ap-mrtg 8 "Wireless Access Point Utilities for Unix" + .SH NAME +-ap-mrtg \- AP to MRTG data translator ++ap-mrtg, ap-rrd \- AP statistics translators + + .SH SYNOPSIS ++.HP + .B ap-mrtg + .B -i + .IR ip +@@ -33,12 +34,32 @@ + .B [-v] + .B [-r] + .B [-h] ++.HP ++.B ap-rrd ++.B -i ++.IR ip ++.B -c ++.IR community ++.B -t ++.IR type ++.BI -d db_file ++.B [-b ++.IR bssid ++.B ] ++.B [-r] ++.B [-h] + + .SH DESCRIPTION ++.P + .B ap-mrtg + get stats from AP and return it in MRTG parsable format. + .br + The Multi Router Traffic Grapher (MRTG) is a tool to monitor the traffic load on network-links. MRTG generates HTML pages containing graphical images which provide a LIVE visual representation of this traffic. You may get it from: http://people.ee.ethz.ch/~oetiker/webtools/mrtg/. ++.P ++.B ap-rrd ++gets stats from an AP and writes them to an RRDtool database. ++.br ++RRDtool is a data logging and graphing system for time series data. + + .SH OPTIONS + .TP +@@ -54,6 +75,9 @@ + .B -b bssid + Mac address of the AP to which get link quality. + .TP ++.B -d db_file ++Name of the rrdtool database to write to. ++.TP + .B -v + report MRTG about problems connecting to AP - if you want to get report about when AP spot work enable it + .TP --- ap-utils-1.5.orig/debian/patches/series +++ ap-utils-1.5/debian/patches/series @@ -0,0 +1,2 @@ +101_fix-man-page-spelling.diff +102_man-page-for-ap-rrd.diff --- ap-utils-1.5.orig/debian/rules +++ ap-utils-1.5/debian/rules @@ -0,0 +1,69 @@ +#!/usr/bin/make -f +#export DH_VERBOSE=1 + +export DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + +confflags += --host $(DEB_BUILD_GNU_TYPE) --build $(DEB_HOST_GNU_TYPE) + +include /usr/share/quilt/quilt.make + +build: build-stamp +build-stamp: $(QUILT_STAMPFN) + dh_testdir + cp -f /usr/share/misc/config.sub config/config.sub + cp -f /usr/share/misc/config.guess config/config.guess + ./configure $(confflags) --prefix=/usr \ + --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info + $(MAKE) + touch build-stamp + +clean: unpatch + dh_testdir + dh_testroot + rm -f build-stamp config/config.sub config/config.guess + [ ! -f Makefile ] || $(MAKE) distclean + #Really clean the po directory + dh_clean po/*.gmo + +install: build + dh_testdir + dh_testroot + dh_clean -k +# dh_installdirs + $(MAKE) DESTDIR=$(CURDIR)/debian/ap-utils install + +binary-indep: build install + +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs ChangeLog + dh_installdocs + iconv -f koi8-u -t utf-8 README \ + > $(CURDIR)/debian/ap-utils/usr/share/doc/ap-utils/README + iconv -f koi8-u -t utf-8 Documentation/Ukrainian/README \ + > $(CURDIR)/debian/ap-utils/usr/share/doc/ap-utils/README.uk +# dh_installexamples +# dh_install +# dh_installmenu +# dh_installdebconf +# dh_installinit +# dh_installcron +# dh_installinfo +# dh_undocumented + dh_installman + dh_link usr/share/man/man8/ap-mrtg.8 usr/share/man/man8/ap-rrd.8 + dh_strip + dh_compress + dh_fixperms +# dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- ap-utils-1.5.orig/debian/watch +++ ap-utils-1.5/debian/watch @@ -0,0 +1,2 @@ +version=4 +http://ap-utils.polesye.net/?download .*/ap-utils/ap-utils-(\d\S+)\.tar\.(?:bz2|gz|xz)